Updating Opus to release 1.1
opus-1.1.tar.gz downloaded from http://www.opus-codec.org/
[email protected]
Review URL: https://codereview.chromium.org/107243004
git-svn-id: svn://svn.chromium.org/chrome/trunk/deps/third_party/opus@239448 0039d316-1c4b-4281-b951-d872f2087c98
diff --git a/INSTALL b/INSTALL
index 40d51f0..a1e89e1 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1 +1,370 @@
-See README file for details
+Installation Instructions
+*************************
+
+Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
+Inc.
+
+ Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved. This file is offered as-is,
+without warranty of any kind.
+
+Basic Installation
+==================
+
+ Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package. Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below. The lack of an optional feature in a given package is not
+necessarily a bug. More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+ The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system.
+
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package, generally using the just-built uninstalled binaries.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation. When installing into a prefix owned by root, it is
+ recommended that the package be configured and built as a regular
+ user, and only the `make install' phase executed with root
+ privileges.
+
+ 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ this time using the binaries in their final installed location.
+ This target does not install anything. Running this target as a
+ regular user, particularly if the prior `make install' required
+ root privileges, verifies that the installation completed
+ correctly.
+
+ 6. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+ 7. Often, you can also type `make uninstall' to remove the installed
+ files again. In practice, not all packages have tested that
+ uninstallation works correctly, even though it is required by the
+ GNU Coding Standards.
+
+ 8. Some packages, particularly those that use Automake, provide `make
+ distcheck', which can by used by developers to test that all other
+ targets like `make install' and `make uninstall' work correctly.
+ This target is generally not run by end users.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you can use GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'. This
+is known as a "VPATH" build.
+
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+ By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them. In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+ The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+ The first method involves providing an override variable for each
+affected directory. For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'. Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated. The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the `DESTDIR' variable. For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names. The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters. On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+ Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+ Some packages offer the ability to configure how verbose the
+execution of `make' will be. For these packages, running `./configure
+--enable-silent-rules' sets the default to minimal output, which can be
+overridden with `make V=1'; while running `./configure
+--disable-silent-rules' sets the default to verbose, which can be
+overridden with `make V=0'.
+
+Particular systems
+==================
+
+ On HP-UX, the default C compiler is not ANSI C compatible. If GNU
+CC is not installed, it is recommended to use the following options in
+order to use an ANSI C compiler:
+
+ ./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
+
+and if that doesn't work, install pre-built binaries of GCC for HP-UX.
+
+ HP-UX `make' updates targets which have the same time stamps as
+their prerequisites, which makes it generally unusable when shipped
+generated files such as `configure' are involved. Use GNU `make'
+instead.
+
+ On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
+parse its `<wchar.h>' header file. The option `-nodtk' can be used as
+a workaround. If GNU CC is not installed, it is therefore recommended
+to try
+
+ ./configure CC="cc"
+
+and if that doesn't work, try
+
+ ./configure CC="cc -nodtk"
+
+ On Solaris, don't put `/usr/ucb' early in your `PATH'. This
+directory contains several dysfunctional programs; working variants of
+these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
+in your `PATH', put it _after_ `/usr/bin'.
+
+ On Haiku, software installed for all users goes in `/boot/common',
+not `/usr/local'. It is recommended to use the following options:
+
+ ./configure --prefix=/boot/common
+
+Specifying the System Type
+==========================
+
+ There may be some features `configure' cannot figure out
+automatically, but needs to determine by the type of machine the package
+will run on. Usually, assuming the package is built to be run on the
+_same_ architectures, `configure' can figure that out, but if it prints
+a message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS
+ KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+ If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+ Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+Unfortunately, this technique does not work for `CONFIG_SHELL' due to
+an Autoconf bug. Until the bug is fixed you can use this workaround:
+
+ CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+`configure' Invocation
+======================
+
+ `configure' recognizes the following options to control how it
+operates.
+
+`--help'
+`-h'
+ Print a summary of all of the options to `configure', and exit.
+
+`--help=short'
+`--help=recursive'
+ Print a summary of the options unique to this package's
+ `configure', and exit. The `short' variant lists options used
+ only in the top level, while the `recursive' variant lists options
+ also present in any nested packages.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`--prefix=DIR'
+ Use DIR as the installation prefix. *note Installation Names::
+ for more details, including other options available for fine-tuning
+ the installation locations.
+
+`--no-create'
+`-n'
+ Run the configure checks, but stop before creating any output
+ files.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
+
diff --git a/Makefile.am b/Makefile.am
index edbcc42..c39d803 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -22,11 +22,24 @@
SILK_SOURCES += $(SILK_SOURCES_FLOAT)
endif
+if DISABLE_FLOAT_API
+else
OPUS_SOURCES += $(OPUS_SOURCES_FLOAT)
+endif
if CPU_ARM
CELT_SOURCES += $(CELT_SOURCES_ARM)
+SILK_SOURCES += $(SILK_SOURCES_ARM)
+if OPUS_ARM_EXTERNAL_ASM
+nodist_libopus_la_SOURCES = $(CELT_SOURCES_ARM_ASM:.s=-gnu.S)
+BUILT_SOURCES = $(CELT_SOURCES_ARM_ASM:.s=-gnu.S) \
+ $(CELT_AM_SOURCES_ARM_ASM:.s.in=.s) \
+ $(CELT_AM_SOURCES_ARM_ASM:.s.in=-gnu.S)
endif
+endif
+
+CLEANFILES = $(CELT_SOURCES_ARM_ASM:.s=-gnu.S) \
+ $(CELT_AM_SOURCES_ARM_ASM:.s.in=-gnu.S)
include celt_headers.mk
include silk_headers.mk
@@ -103,11 +116,13 @@
endif
EXTRA_DIST = version.mk \
- opus.pc.in \
+ opus.pc.in \
opus-uninstalled.pc.in \
opus.m4 \
Makefile.unix \
tests/run_vectors.sh \
+ celt/arm/arm2gnu.pl \
+ celt/arm/celt_pitch_xcorr_arm.s \
win32/VS2010/silk_float.vcxproj \
win32/VS2010/celt.vcxproj.filters \
win32/VS2010/opus.vcxproj \
@@ -203,3 +218,14 @@
.PHONY: opus check-opus install-opus docs install-docs
+
+# automake doesn't do dependency tracking for asm files, that I can tell
+$(CELT_SOURCES_ARM_ASM:%.s=%-gnu.S): celt/arm/armopts-gnu.S
+$(CELT_SOURCES_ARM_ASM:%.s=%-gnu.S): $(top_srcdir)/celt/arm/arm2gnu.pl
+
+# convert ARM asm to GNU as format
+%-gnu.S: $(top_srcdir)/%.s
+ $(top_srcdir)/celt/arm/arm2gnu.pl < $< > $@
+# For autoconf-modified sources (e.g., armopts.s)
+%-gnu.S: %.s
+ $(top_srcdir)/celt/arm/arm2gnu.pl < $< > $@
diff --git a/Makefile.in b/Makefile.in
index 38b5021..cc240ce 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -61,46 +61,59 @@
$(srcdir)/config.h.in $(srcdir)/opus-uninstalled.pc.in \
$(srcdir)/opus.pc.in $(srcdir)/opus_headers.mk \
$(srcdir)/opus_sources.mk $(srcdir)/silk_headers.mk \
- $(srcdir)/silk_sources.mk $(top_srcdir)/configure AUTHORS \
- COPYING ChangeLog INSTALL NEWS compile config.guess config.sub \
- depcomp install-sh ltmain.sh missing
+ $(srcdir)/silk_sources.mk $(top_srcdir)/celt/arm/armopts.s.in \
+ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
+ compile config.guess config.sub depcomp install-sh ltmain.sh \
+ missing
@FIXED_POINT_TRUE@am__append_1 = $(SILK_SOURCES_FIXED)
@FIXED_POINT_FALSE@am__append_2 = $(SILK_SOURCES_FLOAT)
-noinst_PROGRAMS = opus_demo$(EXEEXT) repacketizer_demo$(EXEEXT) \
- opus_compare$(EXEEXT) tests/test_opus_api$(EXEEXT) \
- tests/test_opus_encode$(EXEEXT) \
- tests/test_opus_decode$(EXEEXT) \
- celt/tests/test_unit_cwrs32$(EXEEXT) \
- celt/tests/test_unit_dft$(EXEEXT) \
- celt/tests/test_unit_entropy$(EXEEXT) \
- celt/tests/test_unit_laplace$(EXEEXT) \
- celt/tests/test_unit_mathops$(EXEEXT) \
- celt/tests/test_unit_mdct$(EXEEXT) \
- celt/tests/test_unit_rotation$(EXEEXT) \
- celt/tests/test_unit_types$(EXEEXT) $(am__EXEEXT_1)
-TESTS = celt/tests/test_unit_types$(EXEEXT) \
- celt/tests/test_unit_mathops$(EXEEXT) \
- celt/tests/test_unit_entropy$(EXEEXT) \
- celt/tests/test_unit_laplace$(EXEEXT) \
- celt/tests/test_unit_dft$(EXEEXT) \
- celt/tests/test_unit_mdct$(EXEEXT) \
- celt/tests/test_unit_rotation$(EXEEXT) \
- celt/tests/test_unit_cwrs32$(EXEEXT) \
- tests/test_opus_api$(EXEEXT) tests/test_opus_decode$(EXEEXT) \
- tests/test_opus_encode$(EXEEXT)
-@CUSTOM_MODES_TRUE@am__append_3 = include/opus_custom.h
-@CUSTOM_MODES_TRUE@am__append_4 = opus_custom_demo
+@DISABLE_FLOAT_API_FALSE@am__append_3 = $(OPUS_SOURCES_FLOAT)
+@CPU_ARM_TRUE@am__append_4 = $(CELT_SOURCES_ARM)
+@CPU_ARM_TRUE@am__append_5 = $(SILK_SOURCES_ARM)
+@EXTRA_PROGRAMS_TRUE@noinst_PROGRAMS = opus_demo$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ repacketizer_demo$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ opus_compare$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ tests/test_opus_api$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ tests/test_opus_encode$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ tests/test_opus_decode$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ tests/test_opus_padding$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_cwrs32$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_dft$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_entropy$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_laplace$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_mathops$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_mdct$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_rotation$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_types$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ $(am__EXEEXT_1)
+@EXTRA_PROGRAMS_TRUE@TESTS = celt/tests/test_unit_types$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_mathops$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_entropy$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_laplace$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_dft$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_mdct$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_rotation$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_cwrs32$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ tests/test_opus_api$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ tests/test_opus_decode$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ tests/test_opus_encode$(EXEEXT) \
+@EXTRA_PROGRAMS_TRUE@ tests/test_opus_padding$(EXEEXT)
+@CUSTOM_MODES_TRUE@am__append_6 = include/opus_custom.h
+@CUSTOM_MODES_TRUE@@EXTRA_PROGRAMS_TRUE@am__append_7 = opus_custom_demo
subdir = .
SUBDIRS =
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/as-gcc-inline-assembly.m4 \
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES = opus.pc opus-uninstalled.pc
+CONFIG_CLEAN_FILES = opus.pc opus-uninstalled.pc celt/arm/armopts.s
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
@@ -132,17 +145,20 @@
am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(m4datadir)" \
"$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(pkgincludedir)"
LTLIBRARIES = $(lib_LTLIBRARIES)
-libopus_la_LIBADD =
-am__libopus_la_SOURCES_DIST = celt/bands.c celt/celt.c celt/cwrs.c \
+am__DEPENDENCIES_1 =
+libopus_la_DEPENDENCIES = $(am__DEPENDENCIES_1)
+am__libopus_la_SOURCES_DIST = celt/bands.c celt/celt.c \
+ celt/celt_encoder.c celt/celt_decoder.c celt/cwrs.c \
celt/entcode.c celt/entdec.c celt/entenc.c celt/kiss_fft.c \
celt/laplace.c celt/mathops.c celt/mdct.c celt/modes.c \
celt/pitch.c celt/celt_lpc.c celt/quant_bands.c celt/rate.c \
- celt/vq.c silk/CNG.c silk/code_signs.c silk/init_decoder.c \
- silk/decode_core.c silk/decode_frame.c \
- silk/decode_parameters.c silk/decode_indices.c \
- silk/decode_pulses.c silk/decoder_set_fs.c silk/dec_API.c \
- silk/enc_API.c silk/encode_indices.c silk/encode_pulses.c \
- silk/gain_quant.c silk/interpolate.c silk/LP_variable_cutoff.c \
+ celt/vq.c celt/arm/armcpu.c celt/arm/arm_celt_map.c silk/CNG.c \
+ silk/code_signs.c silk/init_decoder.c silk/decode_core.c \
+ silk/decode_frame.c silk/decode_parameters.c \
+ silk/decode_indices.c silk/decode_pulses.c \
+ silk/decoder_set_fs.c silk/dec_API.c silk/enc_API.c \
+ silk/encode_indices.c silk/encode_pulses.c silk/gain_quant.c \
+ silk/interpolate.c silk/LP_variable_cutoff.c \
silk/NLSF_decode.c silk/NSQ.c silk/NSQ_del_dec.c silk/PLC.c \
silk/shell_coder.c silk/tables_gain.c silk/tables_LTP.c \
silk/tables_NLSF_CB_NB_MB.c silk/tables_NLSF_CB_WB.c \
@@ -205,14 +221,19 @@
silk/float/scale_copy_vector_FLP.c \
silk/float/scale_vector_FLP.c silk/float/schur_FLP.c \
silk/float/sort_FLP.c src/opus.c src/opus_decoder.c \
- src/opus_encoder.c src/opus_multistream.c src/repacketizer.c
+ src/opus_encoder.c src/opus_multistream.c \
+ src/opus_multistream_encoder.c src/opus_multistream_decoder.c \
+ src/repacketizer.c src/analysis.c src/mlp.c src/mlp_data.c
am__dirstamp = $(am__leading_dot)dirstamp
-am__objects_1 = celt/bands.lo celt/celt.lo celt/cwrs.lo \
- celt/entcode.lo celt/entdec.lo celt/entenc.lo celt/kiss_fft.lo \
- celt/laplace.lo celt/mathops.lo celt/mdct.lo celt/modes.lo \
- celt/pitch.lo celt/celt_lpc.lo celt/quant_bands.lo \
- celt/rate.lo celt/vq.lo
-am__objects_2 = silk/fixed/LTP_analysis_filter_FIX.lo \
+am__objects_1 = celt/arm/armcpu.lo celt/arm/arm_celt_map.lo
+@CPU_ARM_TRUE@am__objects_2 = $(am__objects_1)
+am__objects_3 = celt/bands.lo celt/celt.lo celt/celt_encoder.lo \
+ celt/celt_decoder.lo celt/cwrs.lo celt/entcode.lo \
+ celt/entdec.lo celt/entenc.lo celt/kiss_fft.lo celt/laplace.lo \
+ celt/mathops.lo celt/mdct.lo celt/modes.lo celt/pitch.lo \
+ celt/celt_lpc.lo celt/quant_bands.lo celt/rate.lo celt/vq.lo \
+ $(am__objects_2)
+am__objects_4 = silk/fixed/LTP_analysis_filter_FIX.lo \
silk/fixed/LTP_scale_ctrl_FIX.lo silk/fixed/corrMatrix_FIX.lo \
silk/fixed/encode_frame_FIX.lo silk/fixed/find_LPC_FIX.lo \
silk/fixed/find_LTP_FIX.lo silk/fixed/find_pitch_lags_FIX.lo \
@@ -229,8 +250,8 @@
silk/fixed/pitch_analysis_core_FIX.lo \
silk/fixed/vector_ops_FIX.lo silk/fixed/schur64_FIX.lo \
silk/fixed/schur_FIX.lo
-@FIXED_POINT_TRUE@am__objects_3 = $(am__objects_2)
-am__objects_4 = silk/float/apply_sine_window_FLP.lo \
+@FIXED_POINT_TRUE@am__objects_5 = $(am__objects_4)
+am__objects_6 = silk/float/apply_sine_window_FLP.lo \
silk/float/corrMatrix_FLP.lo silk/float/encode_frame_FLP.lo \
silk/float/find_LPC_FLP.lo silk/float/find_LTP_FLP.lo \
silk/float/find_pitch_lags_FLP.lo \
@@ -252,8 +273,9 @@
silk/float/scale_copy_vector_FLP.lo \
silk/float/scale_vector_FLP.lo silk/float/schur_FLP.lo \
silk/float/sort_FLP.lo
-@FIXED_POINT_FALSE@am__objects_5 = $(am__objects_4)
-am__objects_6 = silk/CNG.lo silk/code_signs.lo silk/init_decoder.lo \
+@FIXED_POINT_FALSE@am__objects_7 = $(am__objects_6)
+am__objects_8 =
+am__objects_9 = silk/CNG.lo silk/code_signs.lo silk/init_decoder.lo \
silk/decode_core.lo silk/decode_frame.lo \
silk/decode_parameters.lo silk/decode_indices.lo \
silk/decode_pulses.lo silk/decoder_set_fs.lo silk/dec_API.lo \
@@ -287,87 +309,160 @@
silk/sigm_Q15.lo silk/sort.lo silk/sum_sqr_shift.lo \
silk/stereo_decode_pred.lo silk/stereo_encode_pred.lo \
silk/stereo_find_predictor.lo silk/stereo_quant_pred.lo \
- $(am__objects_3) $(am__objects_5)
-am__objects_7 = src/opus.lo src/opus_decoder.lo src/opus_encoder.lo \
- src/opus_multistream.lo src/repacketizer.lo
-am_libopus_la_OBJECTS = $(am__objects_1) $(am__objects_6) \
- $(am__objects_7)
-libopus_la_OBJECTS = $(am_libopus_la_OBJECTS)
+ $(am__objects_5) $(am__objects_7) $(am__objects_8)
+am__objects_10 = src/analysis.lo src/mlp.lo src/mlp_data.lo
+@DISABLE_FLOAT_API_FALSE@am__objects_11 = $(am__objects_10)
+am__objects_12 = src/opus.lo src/opus_decoder.lo src/opus_encoder.lo \
+ src/opus_multistream.lo src/opus_multistream_encoder.lo \
+ src/opus_multistream_decoder.lo src/repacketizer.lo \
+ $(am__objects_11)
+am_libopus_la_OBJECTS = $(am__objects_3) $(am__objects_9) \
+ $(am__objects_12)
+am__objects_13 = celt/arm/celt_pitch_xcorr_arm-gnu.lo
+@CPU_ARM_TRUE@@OPUS_ARM_EXTERNAL_ASM_TRUE@nodist_libopus_la_OBJECTS = \
+@CPU_ARM_TRUE@@OPUS_ARM_EXTERNAL_ASM_TRUE@ $(am__objects_13)
+libopus_la_OBJECTS = $(am_libopus_la_OBJECTS) \
+ $(nodist_libopus_la_OBJECTS)
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
libopus_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
$(libopus_la_LDFLAGS) $(LDFLAGS) -o $@
-@CUSTOM_MODES_TRUE@am__EXEEXT_1 = opus_custom_demo$(EXEEXT)
+@CUSTOM_MODES_TRUE@@EXTRA_PROGRAMS_TRUE@am__EXEEXT_1 = opus_custom_demo$(EXEEXT)
PROGRAMS = $(noinst_PROGRAMS)
-am_celt_tests_test_unit_cwrs32_OBJECTS = \
- celt/tests/test_unit_cwrs32.$(OBJEXT)
+am__celt_tests_test_unit_cwrs32_SOURCES_DIST = \
+ celt/tests/test_unit_cwrs32.c
+@EXTRA_PROGRAMS_TRUE@am_celt_tests_test_unit_cwrs32_OBJECTS = \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_cwrs32.$(OBJEXT)
celt_tests_test_unit_cwrs32_OBJECTS = \
$(am_celt_tests_test_unit_cwrs32_OBJECTS)
-celt_tests_test_unit_cwrs32_DEPENDENCIES =
-am_celt_tests_test_unit_dft_OBJECTS = \
- celt/tests/test_unit_dft.$(OBJEXT)
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_cwrs32_DEPENDENCIES = \
+@EXTRA_PROGRAMS_TRUE@ $(am__DEPENDENCIES_1)
+am__celt_tests_test_unit_dft_SOURCES_DIST = \
+ celt/tests/test_unit_dft.c
+@EXTRA_PROGRAMS_TRUE@am_celt_tests_test_unit_dft_OBJECTS = \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_dft.$(OBJEXT)
celt_tests_test_unit_dft_OBJECTS = \
$(am_celt_tests_test_unit_dft_OBJECTS)
-celt_tests_test_unit_dft_DEPENDENCIES =
-am_celt_tests_test_unit_entropy_OBJECTS = \
- celt/tests/test_unit_entropy.$(OBJEXT)
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_dft_DEPENDENCIES = \
+@EXTRA_PROGRAMS_TRUE@ $(am__DEPENDENCIES_1)
+am__celt_tests_test_unit_entropy_SOURCES_DIST = \
+ celt/tests/test_unit_entropy.c
+@EXTRA_PROGRAMS_TRUE@am_celt_tests_test_unit_entropy_OBJECTS = \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_entropy.$(OBJEXT)
celt_tests_test_unit_entropy_OBJECTS = \
$(am_celt_tests_test_unit_entropy_OBJECTS)
-celt_tests_test_unit_entropy_DEPENDENCIES =
-am_celt_tests_test_unit_laplace_OBJECTS = \
- celt/tests/test_unit_laplace.$(OBJEXT)
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_entropy_DEPENDENCIES = \
+@EXTRA_PROGRAMS_TRUE@ $(am__DEPENDENCIES_1)
+am__celt_tests_test_unit_laplace_SOURCES_DIST = \
+ celt/tests/test_unit_laplace.c
+@EXTRA_PROGRAMS_TRUE@am_celt_tests_test_unit_laplace_OBJECTS = \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_laplace.$(OBJEXT)
celt_tests_test_unit_laplace_OBJECTS = \
$(am_celt_tests_test_unit_laplace_OBJECTS)
-celt_tests_test_unit_laplace_DEPENDENCIES =
-am_celt_tests_test_unit_mathops_OBJECTS = \
- celt/tests/test_unit_mathops.$(OBJEXT)
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_laplace_DEPENDENCIES = \
+@EXTRA_PROGRAMS_TRUE@ $(am__DEPENDENCIES_1)
+am__celt_tests_test_unit_mathops_SOURCES_DIST = \
+ celt/tests/test_unit_mathops.c
+@EXTRA_PROGRAMS_TRUE@am_celt_tests_test_unit_mathops_OBJECTS = \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_mathops.$(OBJEXT)
celt_tests_test_unit_mathops_OBJECTS = \
$(am_celt_tests_test_unit_mathops_OBJECTS)
-celt_tests_test_unit_mathops_DEPENDENCIES =
-am_celt_tests_test_unit_mdct_OBJECTS = \
- celt/tests/test_unit_mdct.$(OBJEXT)
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_mathops_DEPENDENCIES = \
+@EXTRA_PROGRAMS_TRUE@ $(am__DEPENDENCIES_1)
+am__celt_tests_test_unit_mdct_SOURCES_DIST = \
+ celt/tests/test_unit_mdct.c
+@EXTRA_PROGRAMS_TRUE@am_celt_tests_test_unit_mdct_OBJECTS = \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_mdct.$(OBJEXT)
celt_tests_test_unit_mdct_OBJECTS = \
$(am_celt_tests_test_unit_mdct_OBJECTS)
-celt_tests_test_unit_mdct_DEPENDENCIES =
-am_celt_tests_test_unit_rotation_OBJECTS = \
- celt/tests/test_unit_rotation.$(OBJEXT)
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_mdct_DEPENDENCIES = \
+@EXTRA_PROGRAMS_TRUE@ $(am__DEPENDENCIES_1)
+am__celt_tests_test_unit_rotation_SOURCES_DIST = \
+ celt/tests/test_unit_rotation.c
+@EXTRA_PROGRAMS_TRUE@am_celt_tests_test_unit_rotation_OBJECTS = \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_rotation.$(OBJEXT)
celt_tests_test_unit_rotation_OBJECTS = \
$(am_celt_tests_test_unit_rotation_OBJECTS)
-celt_tests_test_unit_rotation_DEPENDENCIES =
-am_celt_tests_test_unit_types_OBJECTS = \
- celt/tests/test_unit_types.$(OBJEXT)
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_rotation_DEPENDENCIES = \
+@EXTRA_PROGRAMS_TRUE@ $(am__DEPENDENCIES_1)
+am__celt_tests_test_unit_types_SOURCES_DIST = \
+ celt/tests/test_unit_types.c
+@EXTRA_PROGRAMS_TRUE@am_celt_tests_test_unit_types_OBJECTS = \
+@EXTRA_PROGRAMS_TRUE@ celt/tests/test_unit_types.$(OBJEXT)
celt_tests_test_unit_types_OBJECTS = \
$(am_celt_tests_test_unit_types_OBJECTS)
-celt_tests_test_unit_types_DEPENDENCIES =
-am_opus_compare_OBJECTS = src/opus_compare.$(OBJEXT)
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_types_DEPENDENCIES = \
+@EXTRA_PROGRAMS_TRUE@ $(am__DEPENDENCIES_1)
+am__opus_compare_SOURCES_DIST = src/opus_compare.c
+@EXTRA_PROGRAMS_TRUE@am_opus_compare_OBJECTS = \
+@EXTRA_PROGRAMS_TRUE@ src/opus_compare.$(OBJEXT)
opus_compare_OBJECTS = $(am_opus_compare_OBJECTS)
-opus_compare_DEPENDENCIES =
+@EXTRA_PROGRAMS_TRUE@opus_compare_DEPENDENCIES = \
+@EXTRA_PROGRAMS_TRUE@ $(am__DEPENDENCIES_1)
am__opus_custom_demo_SOURCES_DIST = celt/opus_custom_demo.c
-@CUSTOM_MODES_TRUE@am_opus_custom_demo_OBJECTS = \
-@CUSTOM_MODES_TRUE@ celt/opus_custom_demo.$(OBJEXT)
+@CUSTOM_MODES_TRUE@@EXTRA_PROGRAMS_TRUE@am_opus_custom_demo_OBJECTS = celt/opus_custom_demo.$(OBJEXT)
opus_custom_demo_OBJECTS = $(am_opus_custom_demo_OBJECTS)
-@CUSTOM_MODES_TRUE@opus_custom_demo_DEPENDENCIES = libopus.la
-am_opus_demo_OBJECTS = src/opus_demo.$(OBJEXT)
+@CUSTOM_MODES_TRUE@@EXTRA_PROGRAMS_TRUE@opus_custom_demo_DEPENDENCIES = \
+@CUSTOM_MODES_TRUE@@EXTRA_PROGRAMS_TRUE@ libopus.la \
+@CUSTOM_MODES_TRUE@@EXTRA_PROGRAMS_TRUE@ $(am__DEPENDENCIES_1)
+am__opus_demo_SOURCES_DIST = src/opus_demo.c
+@EXTRA_PROGRAMS_TRUE@am_opus_demo_OBJECTS = src/opus_demo.$(OBJEXT)
opus_demo_OBJECTS = $(am_opus_demo_OBJECTS)
-opus_demo_DEPENDENCIES = libopus.la
-am_repacketizer_demo_OBJECTS = src/repacketizer_demo.$(OBJEXT)
+@EXTRA_PROGRAMS_TRUE@opus_demo_DEPENDENCIES = libopus.la \
+@EXTRA_PROGRAMS_TRUE@ $(am__DEPENDENCIES_1)
+am__repacketizer_demo_SOURCES_DIST = src/repacketizer_demo.c
+@EXTRA_PROGRAMS_TRUE@am_repacketizer_demo_OBJECTS = \
+@EXTRA_PROGRAMS_TRUE@ src/repacketizer_demo.$(OBJEXT)
repacketizer_demo_OBJECTS = $(am_repacketizer_demo_OBJECTS)
-repacketizer_demo_DEPENDENCIES = libopus.la
-am_tests_test_opus_api_OBJECTS = tests/test_opus_api.$(OBJEXT)
+@EXTRA_PROGRAMS_TRUE@repacketizer_demo_DEPENDENCIES = libopus.la \
+@EXTRA_PROGRAMS_TRUE@ $(am__DEPENDENCIES_1)
+am__tests_test_opus_api_SOURCES_DIST = tests/test_opus_api.c \
+ tests/test_opus_common.h
+@EXTRA_PROGRAMS_TRUE@am_tests_test_opus_api_OBJECTS = \
+@EXTRA_PROGRAMS_TRUE@ tests/test_opus_api.$(OBJEXT)
tests_test_opus_api_OBJECTS = $(am_tests_test_opus_api_OBJECTS)
-tests_test_opus_api_DEPENDENCIES = libopus.la
-am_tests_test_opus_decode_OBJECTS = tests/test_opus_decode.$(OBJEXT)
+@EXTRA_PROGRAMS_TRUE@tests_test_opus_api_DEPENDENCIES = libopus.la \
+@EXTRA_PROGRAMS_TRUE@ $(am__DEPENDENCIES_1)
+am__tests_test_opus_decode_SOURCES_DIST = tests/test_opus_decode.c \
+ tests/test_opus_common.h
+@EXTRA_PROGRAMS_TRUE@am_tests_test_opus_decode_OBJECTS = \
+@EXTRA_PROGRAMS_TRUE@ tests/test_opus_decode.$(OBJEXT)
tests_test_opus_decode_OBJECTS = $(am_tests_test_opus_decode_OBJECTS)
-tests_test_opus_decode_DEPENDENCIES = libopus.la
-am_tests_test_opus_encode_OBJECTS = tests/test_opus_encode.$(OBJEXT)
+@EXTRA_PROGRAMS_TRUE@tests_test_opus_decode_DEPENDENCIES = libopus.la \
+@EXTRA_PROGRAMS_TRUE@ $(am__DEPENDENCIES_1)
+am__tests_test_opus_encode_SOURCES_DIST = tests/test_opus_encode.c \
+ tests/test_opus_common.h
+@EXTRA_PROGRAMS_TRUE@am_tests_test_opus_encode_OBJECTS = \
+@EXTRA_PROGRAMS_TRUE@ tests/test_opus_encode.$(OBJEXT)
tests_test_opus_encode_OBJECTS = $(am_tests_test_opus_encode_OBJECTS)
-tests_test_opus_encode_DEPENDENCIES = libopus.la
+@EXTRA_PROGRAMS_TRUE@tests_test_opus_encode_DEPENDENCIES = libopus.la \
+@EXTRA_PROGRAMS_TRUE@ $(am__DEPENDENCIES_1)
+am__tests_test_opus_padding_SOURCES_DIST = tests/test_opus_padding.c \
+ tests/test_opus_common.h
+@EXTRA_PROGRAMS_TRUE@am_tests_test_opus_padding_OBJECTS = \
+@EXTRA_PROGRAMS_TRUE@ tests/test_opus_padding.$(OBJEXT)
+tests_test_opus_padding_OBJECTS = \
+ $(am_tests_test_opus_padding_OBJECTS)
+@EXTRA_PROGRAMS_TRUE@tests_test_opus_padding_DEPENDENCIES = \
+@EXTRA_PROGRAMS_TRUE@ libopus.la $(am__DEPENDENCIES_1)
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
+CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
+LTCPPASCOMPILE = $(LIBTOOL) $(AM_V_lt) $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CCASFLAGS) $(CCASFLAGS)
+AM_V_CPPAS = $(am__v_CPPAS_@AM_V@)
+am__v_CPPAS_ = $(am__v_CPPAS_@AM_DEFAULT_V@)
+am__v_CPPAS_0 = @echo " CPPAS " $@;
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
@@ -377,9 +472,6 @@
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo " CC " $@;
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
CCLD = $(CC)
LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
@@ -390,7 +482,8 @@
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
-SOURCES = $(libopus_la_SOURCES) $(celt_tests_test_unit_cwrs32_SOURCES) \
+SOURCES = $(libopus_la_SOURCES) $(nodist_libopus_la_SOURCES) \
+ $(celt_tests_test_unit_cwrs32_SOURCES) \
$(celt_tests_test_unit_dft_SOURCES) \
$(celt_tests_test_unit_entropy_SOURCES) \
$(celt_tests_test_unit_laplace_SOURCES) \
@@ -401,20 +494,25 @@
$(opus_custom_demo_SOURCES) $(opus_demo_SOURCES) \
$(repacketizer_demo_SOURCES) $(tests_test_opus_api_SOURCES) \
$(tests_test_opus_decode_SOURCES) \
- $(tests_test_opus_encode_SOURCES)
+ $(tests_test_opus_encode_SOURCES) \
+ $(tests_test_opus_padding_SOURCES)
DIST_SOURCES = $(am__libopus_la_SOURCES_DIST) \
- $(celt_tests_test_unit_cwrs32_SOURCES) \
- $(celt_tests_test_unit_dft_SOURCES) \
- $(celt_tests_test_unit_entropy_SOURCES) \
- $(celt_tests_test_unit_laplace_SOURCES) \
- $(celt_tests_test_unit_mathops_SOURCES) \
- $(celt_tests_test_unit_mdct_SOURCES) \
- $(celt_tests_test_unit_rotation_SOURCES) \
- $(celt_tests_test_unit_types_SOURCES) $(opus_compare_SOURCES) \
- $(am__opus_custom_demo_SOURCES_DIST) $(opus_demo_SOURCES) \
- $(repacketizer_demo_SOURCES) $(tests_test_opus_api_SOURCES) \
- $(tests_test_opus_decode_SOURCES) \
- $(tests_test_opus_encode_SOURCES)
+ $(am__celt_tests_test_unit_cwrs32_SOURCES_DIST) \
+ $(am__celt_tests_test_unit_dft_SOURCES_DIST) \
+ $(am__celt_tests_test_unit_entropy_SOURCES_DIST) \
+ $(am__celt_tests_test_unit_laplace_SOURCES_DIST) \
+ $(am__celt_tests_test_unit_mathops_SOURCES_DIST) \
+ $(am__celt_tests_test_unit_mdct_SOURCES_DIST) \
+ $(am__celt_tests_test_unit_rotation_SOURCES_DIST) \
+ $(am__celt_tests_test_unit_types_SOURCES_DIST) \
+ $(am__opus_compare_SOURCES_DIST) \
+ $(am__opus_custom_demo_SOURCES_DIST) \
+ $(am__opus_demo_SOURCES_DIST) \
+ $(am__repacketizer_demo_SOURCES_DIST) \
+ $(am__tests_test_opus_api_SOURCES_DIST) \
+ $(am__tests_test_opus_decode_SOURCES_DIST) \
+ $(am__tests_test_opus_encode_SOURCES_DIST) \
+ $(am__tests_test_opus_padding_SOURCES_DIST)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
@@ -490,6 +588,9 @@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
@@ -508,6 +609,7 @@
FGREP = @FGREP@
GREP = @GREP@
HAVE_DOXYGEN = @HAVE_DOXYGEN@
+HAVE_PERL = @HAVE_PERL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -530,10 +632,13 @@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OPUS_ARM_MAY_HAVE_EDSP = @OPUS_ARM_MAY_HAVE_EDSP@
+OPUS_ARM_MAY_HAVE_MEDIA = @OPUS_ARM_MAY_HAVE_MEDIA@
+OPUS_ARM_MAY_HAVE_NEON = @OPUS_ARM_MAY_HAVE_NEON@
+OPUS_HAVE_RTCD = @OPUS_HAVE_RTCD@
OPUS_LT_AGE = @OPUS_LT_AGE@
OPUS_LT_CURRENT = @OPUS_LT_CURRENT@
OPUS_LT_REVISION = @OPUS_LT_REVISION@
-OPUS_VERSION = @OPUS_VERSION@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
@@ -545,15 +650,11 @@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PC_BUILD = @PC_BUILD@
-PC_LIBM = @PC_LIBM@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
-SIZE16 = @SIZE16@
-SIZE32 = @SIZE32@
STRIP = @STRIP@
-SYMBOL_VISIBILITY = @SYMBOL_VISIBILITY@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
@@ -608,25 +709,26 @@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = subdir-objects
+ACLOCAL_AMFLAGS = -I m4
lib_LTLIBRARIES = libopus.la
DIST_SUBDIRS = doc
-INCLUDES = -I$(top_srcdir)/include -I$(top_srcdir)/celt -I$(top_srcdir)/silk -I$(top_srcdir)/silk/float -I$(top_srcdir)/silk/fixed
-CELT_SOURCES = celt/bands.c \
-celt/celt.c \
-celt/cwrs.c \
-celt/entcode.c \
-celt/entdec.c \
-celt/entenc.c \
-celt/kiss_fft.c \
-celt/laplace.c \
-celt/mathops.c \
-celt/mdct.c \
-celt/modes.c \
-celt/pitch.c \
-celt/celt_lpc.c \
-celt/quant_bands.c \
-celt/rate.c \
-celt/vq.c
+AM_CPPFLAGS = -I$(top_srcdir)/include -I$(top_srcdir)/celt -I$(top_srcdir)/silk \
+ -I$(top_srcdir)/silk/float -I$(top_srcdir)/silk/fixed
+
+CELT_SOURCES = celt/bands.c celt/celt.c celt/celt_encoder.c \
+ celt/celt_decoder.c celt/cwrs.c celt/entcode.c celt/entdec.c \
+ celt/entenc.c celt/kiss_fft.c celt/laplace.c celt/mathops.c \
+ celt/mdct.c celt/modes.c celt/pitch.c celt/celt_lpc.c \
+ celt/quant_bands.c celt/rate.c celt/vq.c $(am__append_4)
+CELT_SOURCES_ARM = \
+celt/arm/armcpu.c \
+celt/arm/arm_celt_map.c
+
+CELT_SOURCES_ARM_ASM = \
+celt/arm/celt_pitch_xcorr_arm.s
+
+CELT_AM_SOURCES_ARM_ASM = \
+celt/arm/armopts.s.in
SILK_SOURCES = silk/CNG.c silk/code_signs.c silk/init_decoder.c \
silk/decode_core.c silk/decode_frame.c \
@@ -659,7 +761,7 @@
silk/sigm_Q15.c silk/sort.c silk/sum_sqr_shift.c \
silk/stereo_decode_pred.c silk/stereo_encode_pred.c \
silk/stereo_find_predictor.c silk/stereo_quant_pred.c \
- $(am__append_1) $(am__append_2)
+ $(am__append_1) $(am__append_2) $(am__append_5)
SILK_SOURCES_FIXED = \
silk/fixed/LTP_analysis_filter_FIX.c \
silk/fixed/LTP_scale_ctrl_FIX.c \
@@ -720,16 +822,28 @@
silk/float/schur_FLP.c \
silk/float/sort_FLP.c
-OPUS_SOURCES = src/opus.c \
-src/opus_decoder.c \
-src/opus_encoder.c \
-src/opus_multistream.c \
-src/repacketizer.c
+OPUS_SOURCES = src/opus.c src/opus_decoder.c src/opus_encoder.c \
+ src/opus_multistream.c src/opus_multistream_encoder.c \
+ src/opus_multistream_decoder.c src/repacketizer.c \
+ $(am__append_3)
+OPUS_SOURCES_FLOAT = \
+src/analysis.c \
+src/mlp.c \
+src/mlp_data.c
+
+@CPU_ARM_TRUE@@OPUS_ARM_EXTERNAL_ASM_TRUE@nodist_libopus_la_SOURCES = $(CELT_SOURCES_ARM_ASM:.s=-gnu.S)
+@CPU_ARM_TRUE@@OPUS_ARM_EXTERNAL_ASM_TRUE@BUILT_SOURCES = $(CELT_SOURCES_ARM_ASM:.s=-gnu.S) \
+@CPU_ARM_TRUE@@OPUS_ARM_EXTERNAL_ASM_TRUE@ $(CELT_AM_SOURCES_ARM_ASM:.s.in=.s) \
+@CPU_ARM_TRUE@@OPUS_ARM_EXTERNAL_ASM_TRUE@ $(CELT_AM_SOURCES_ARM_ASM:.s.in=-gnu.S)
+
+CLEANFILES = $(CELT_SOURCES_ARM_ASM:.s=-gnu.S) \
+ $(CELT_AM_SOURCES_ARM_ASM:.s.in=-gnu.S)
CELT_HEAD = \
celt/arch.h \
celt/bands.h \
celt/celt.h \
+celt/cpu_support.h \
include/opus_types.h \
include/opus_defines.h \
include/opus_custom.h \
@@ -756,7 +870,14 @@
celt/stack_alloc.h \
celt/vq.h \
celt/static_modes_float.h \
-celt/static_modes_fixed.h
+celt/static_modes_fixed.h \
+celt/arm/armcpu.h \
+celt/arm/fixed_armv4.h \
+celt/arm/fixed_armv5e.h \
+celt/arm/kiss_fft_armv4.h \
+celt/arm/kiss_fft_armv5e.h \
+celt/arm/pitch_arm.h \
+celt/x86/pitch_sse.h
SILK_HEAD = \
silk/debug.h \
@@ -779,6 +900,10 @@
silk/resampler_rom.h \
silk/resampler_structs.h \
silk/SigProc_FIX.h \
+silk/arm/macros_armv4.h \
+silk/arm/macros_armv5e.h \
+silk/arm/SigProc_FIX_armv4.h \
+silk/arm/SigProc_FIX_armv5e.h \
silk/fixed/main_FIX.h \
silk/fixed/structs_FIX.h \
silk/float/main_FLP.h \
@@ -788,68 +913,76 @@
OPUS_HEAD = \
include/opus.h \
include/opus_multistream.h \
-src/opus_private.h
+src/opus_private.h \
+src/analysis.h \
+src/mlp.h \
+src/tansig_table.h
libopus_la_SOURCES = $(CELT_SOURCES) $(SILK_SOURCES) $(OPUS_SOURCES)
libopus_la_LDFLAGS = -no-undefined -version-info @OPUS_LT_CURRENT@:@OPUS_LT_REVISION@:@OPUS_LT_AGE@
+libopus_la_LIBADD = $(LIBM)
pkginclude_HEADERS = include/opus.h include/opus_multistream.h \
- include/opus_types.h include/opus_defines.h $(am__append_3)
+ include/opus_types.h include/opus_defines.h $(am__append_6)
noinst_HEADERS = $(OPUS_HEAD) $(SILK_HEAD) $(CELT_HEAD)
-opus_demo_SOURCES = src/opus_demo.c
-opus_demo_LDADD = libopus.la -lm
-repacketizer_demo_SOURCES = src/repacketizer_demo.c
-repacketizer_demo_LDADD = libopus.la -lm
-opus_compare_SOURCES = src/opus_compare.c
-opus_compare_LDADD = -lm
-tests_test_opus_api_SOURCES = tests/test_opus_api.c tests/test_opus_common.h
-tests_test_opus_api_LDADD = libopus.la -lm
-tests_test_opus_encode_SOURCES = tests/test_opus_encode.c tests/test_opus_common.h
-tests_test_opus_encode_LDADD = libopus.la -lm
-tests_test_opus_decode_SOURCES = tests/test_opus_decode.c tests/test_opus_common.h
-tests_test_opus_decode_LDADD = libopus.la -lm
-celt_tests_test_unit_cwrs32_SOURCES = celt/tests/test_unit_cwrs32.c
-celt_tests_test_unit_cwrs32_LDADD = -lm
-celt_tests_test_unit_dft_SOURCES = celt/tests/test_unit_dft.c
-celt_tests_test_unit_dft_LDADD = -lm
-celt_tests_test_unit_entropy_SOURCES = celt/tests/test_unit_entropy.c
-celt_tests_test_unit_entropy_LDADD = -lm
-celt_tests_test_unit_laplace_SOURCES = celt/tests/test_unit_laplace.c
-celt_tests_test_unit_laplace_LDADD = -lm
-celt_tests_test_unit_mathops_SOURCES = celt/tests/test_unit_mathops.c
-celt_tests_test_unit_mathops_LDADD = -lm
-celt_tests_test_unit_mdct_SOURCES = celt/tests/test_unit_mdct.c
-celt_tests_test_unit_mdct_LDADD = -lm
-celt_tests_test_unit_rotation_SOURCES = celt/tests/test_unit_rotation.c
-celt_tests_test_unit_rotation_LDADD = -lm
-celt_tests_test_unit_types_SOURCES = celt/tests/test_unit_types.c
-celt_tests_test_unit_types_LDADD = -lm
-@CUSTOM_MODES_TRUE@opus_custom_demo_SOURCES = celt/opus_custom_demo.c
-@CUSTOM_MODES_TRUE@opus_custom_demo_LDADD = libopus.la -lm
+@EXTRA_PROGRAMS_TRUE@opus_demo_SOURCES = src/opus_demo.c
+@EXTRA_PROGRAMS_TRUE@opus_demo_LDADD = libopus.la $(LIBM)
+@EXTRA_PROGRAMS_TRUE@repacketizer_demo_SOURCES = src/repacketizer_demo.c
+@EXTRA_PROGRAMS_TRUE@repacketizer_demo_LDADD = libopus.la $(LIBM)
+@EXTRA_PROGRAMS_TRUE@opus_compare_SOURCES = src/opus_compare.c
+@EXTRA_PROGRAMS_TRUE@opus_compare_LDADD = $(LIBM)
+@EXTRA_PROGRAMS_TRUE@tests_test_opus_api_SOURCES = tests/test_opus_api.c tests/test_opus_common.h
+@EXTRA_PROGRAMS_TRUE@tests_test_opus_api_LDADD = libopus.la $(LIBM)
+@EXTRA_PROGRAMS_TRUE@tests_test_opus_encode_SOURCES = tests/test_opus_encode.c tests/test_opus_common.h
+@EXTRA_PROGRAMS_TRUE@tests_test_opus_encode_LDADD = libopus.la $(LIBM)
+@EXTRA_PROGRAMS_TRUE@tests_test_opus_decode_SOURCES = tests/test_opus_decode.c tests/test_opus_common.h
+@EXTRA_PROGRAMS_TRUE@tests_test_opus_decode_LDADD = libopus.la $(LIBM)
+@EXTRA_PROGRAMS_TRUE@tests_test_opus_padding_SOURCES = tests/test_opus_padding.c tests/test_opus_common.h
+@EXTRA_PROGRAMS_TRUE@tests_test_opus_padding_LDADD = libopus.la $(LIBM)
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_cwrs32_SOURCES = celt/tests/test_unit_cwrs32.c
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_cwrs32_LDADD = $(LIBM)
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_dft_SOURCES = celt/tests/test_unit_dft.c
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_dft_LDADD = $(LIBM)
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_entropy_SOURCES = celt/tests/test_unit_entropy.c
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_entropy_LDADD = $(LIBM)
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_laplace_SOURCES = celt/tests/test_unit_laplace.c
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_laplace_LDADD = $(LIBM)
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_mathops_SOURCES = celt/tests/test_unit_mathops.c
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_mathops_LDADD = $(LIBM)
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_mdct_SOURCES = celt/tests/test_unit_mdct.c
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_mdct_LDADD = $(LIBM)
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_rotation_SOURCES = celt/tests/test_unit_rotation.c
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_rotation_LDADD = $(LIBM)
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_types_SOURCES = celt/tests/test_unit_types.c
+@EXTRA_PROGRAMS_TRUE@celt_tests_test_unit_types_LDADD = $(LIBM)
+@CUSTOM_MODES_TRUE@@EXTRA_PROGRAMS_TRUE@opus_custom_demo_SOURCES = celt/opus_custom_demo.c
+@CUSTOM_MODES_TRUE@@EXTRA_PROGRAMS_TRUE@opus_custom_demo_LDADD = libopus.la $(LIBM)
EXTRA_DIST = version.mk \
- opus.pc.in \
+ opus.pc.in \
opus-uninstalled.pc.in \
opus.m4 \
Makefile.unix \
tests/run_vectors.sh \
- opus.sln \
- celt/celt.vcxproj \
- celt/celt.vcxproj.filters \
- src/opus_demo.vcxproj \
- src/opus.vcxproj \
- src/opus.vcxproj.filters \
- src/opus_demo.vcxproj.filters \
- tests/test_opus_decode.vcxproj.filters \
- tests/test_opus_decode.vcxproj \
- tests/test_opus_encode.vcxproj.filters \
- tests/test_opus_encode.vcxproj \
- tests/test_opus_api.vcxproj.filters \
- tests/test_opus_api.vcxproj \
- silk/float/silk_float.vcxproj.filters \
- silk/float/silk_float.vcxproj \
- silk/fixed/silk_fixed.vcxproj.filters \
- silk/fixed/silk_fixed.vcxproj \
- silk/silk_common.vcxproj \
- silk/silk_common.vcxproj.filters \
+ celt/arm/arm2gnu.pl \
+ celt/arm/celt_pitch_xcorr_arm.s \
+ win32/VS2010/silk_float.vcxproj \
+ win32/VS2010/celt.vcxproj.filters \
+ win32/VS2010/opus.vcxproj \
+ win32/VS2010/silk_common.vcxproj.filters \
+ win32/VS2010/silk_float.vcxproj.filters \
+ win32/VS2010/test_opus_encode.vcxproj.filters \
+ win32/VS2010/silk_common.vcxproj \
+ win32/VS2010/test_opus_encode.vcxproj \
+ win32/VS2010/opus_demo.vcxproj \
+ win32/VS2010/test_opus_api.vcxproj.filters \
+ win32/VS2010/test_opus_api.vcxproj \
+ win32/VS2010/test_opus_decode.vcxproj.filters \
+ win32/VS2010/silk_fixed.vcxproj.filters \
+ win32/VS2010/opus_demo.vcxproj.filters \
+ win32/VS2010/silk_fixed.vcxproj \
+ win32/VS2010/opus.vcxproj.filters \
+ win32/VS2010/test_opus_decode.vcxproj \
+ win32/VS2010/celt.vcxproj \
+ win32/VS2010/opus.sln \
win32/genversion.bat \
win32/config.h
@@ -857,11 +990,11 @@
pkgconfig_DATA = opus.pc
m4datadir = $(datadir)/aclocal
m4data_DATA = opus.m4
-all: config.h
+all: $(BUILT_SOURCES) config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
+.SUFFIXES: .S .c .lo .o .obj
am--refresh: Makefile
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/celt_sources.mk $(srcdir)/silk_sources.mk $(srcdir)/opus_sources.mk $(srcdir)/celt_headers.mk $(srcdir)/silk_headers.mk $(srcdir)/opus_headers.mk $(am__configure_deps)
@@ -916,6 +1049,8 @@
cd $(top_builddir) && $(SHELL) ./config.status $@
opus-uninstalled.pc: $(top_builddir)/config.status $(srcdir)/opus-uninstalled.pc.in
cd $(top_builddir) && $(SHELL) ./config.status $@
+celt/arm/armopts.s: $(top_builddir)/config.status $(top_srcdir)/celt/arm/armopts.s.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
install-libLTLIBRARIES: $(lib_LTLIBRARIES)
@$(NORMAL_INSTALL)
@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
@@ -956,6 +1091,10 @@
@: > celt/$(DEPDIR)/$(am__dirstamp)
celt/bands.lo: celt/$(am__dirstamp) celt/$(DEPDIR)/$(am__dirstamp)
celt/celt.lo: celt/$(am__dirstamp) celt/$(DEPDIR)/$(am__dirstamp)
+celt/celt_encoder.lo: celt/$(am__dirstamp) \
+ celt/$(DEPDIR)/$(am__dirstamp)
+celt/celt_decoder.lo: celt/$(am__dirstamp) \
+ celt/$(DEPDIR)/$(am__dirstamp)
celt/cwrs.lo: celt/$(am__dirstamp) celt/$(DEPDIR)/$(am__dirstamp)
celt/entcode.lo: celt/$(am__dirstamp) celt/$(DEPDIR)/$(am__dirstamp)
celt/entdec.lo: celt/$(am__dirstamp) celt/$(DEPDIR)/$(am__dirstamp)
@@ -971,6 +1110,16 @@
celt/$(DEPDIR)/$(am__dirstamp)
celt/rate.lo: celt/$(am__dirstamp) celt/$(DEPDIR)/$(am__dirstamp)
celt/vq.lo: celt/$(am__dirstamp) celt/$(DEPDIR)/$(am__dirstamp)
+celt/arm/$(am__dirstamp):
+ @$(MKDIR_P) celt/arm
+ @: > celt/arm/$(am__dirstamp)
+celt/arm/$(DEPDIR)/$(am__dirstamp):
+ @$(MKDIR_P) celt/arm/$(DEPDIR)
+ @: > celt/arm/$(DEPDIR)/$(am__dirstamp)
+celt/arm/armcpu.lo: celt/arm/$(am__dirstamp) \
+ celt/arm/$(DEPDIR)/$(am__dirstamp)
+celt/arm/arm_celt_map.lo: celt/arm/$(am__dirstamp) \
+ celt/arm/$(DEPDIR)/$(am__dirstamp)
silk/$(am__dirstamp):
@$(MKDIR_P) silk
@: > silk/$(am__dirstamp)
@@ -1249,7 +1398,16 @@
src/opus_encoder.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
src/opus_multistream.lo: src/$(am__dirstamp) \
src/$(DEPDIR)/$(am__dirstamp)
+src/opus_multistream_encoder.lo: src/$(am__dirstamp) \
+ src/$(DEPDIR)/$(am__dirstamp)
+src/opus_multistream_decoder.lo: src/$(am__dirstamp) \
+ src/$(DEPDIR)/$(am__dirstamp)
src/repacketizer.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
+src/analysis.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
+src/mlp.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
+src/mlp_data.lo: src/$(am__dirstamp) src/$(DEPDIR)/$(am__dirstamp)
+celt/arm/celt_pitch_xcorr_arm-gnu.lo: celt/arm/$(am__dirstamp) \
+ celt/arm/$(DEPDIR)/$(am__dirstamp)
libopus.la: $(libopus_la_OBJECTS) $(libopus_la_DEPENDENCIES) $(EXTRA_libopus_la_DEPENDENCIES)
$(AM_V_CCLD)$(libopus_la_LINK) -rpath $(libdir) $(libopus_la_OBJECTS) $(libopus_la_LIBADD) $(LIBS)
@@ -1348,13 +1506,28 @@
tests/test_opus_encode$(EXEEXT): $(tests_test_opus_encode_OBJECTS) $(tests_test_opus_encode_DEPENDENCIES) $(EXTRA_tests_test_opus_encode_DEPENDENCIES) tests/$(am__dirstamp)
@rm -f tests/test_opus_encode$(EXEEXT)
$(AM_V_CCLD)$(LINK) $(tests_test_opus_encode_OBJECTS) $(tests_test_opus_encode_LDADD) $(LIBS)
+tests/test_opus_padding.$(OBJEXT): tests/$(am__dirstamp) \
+ tests/$(DEPDIR)/$(am__dirstamp)
+tests/test_opus_padding$(EXEEXT): $(tests_test_opus_padding_OBJECTS) $(tests_test_opus_padding_DEPENDENCIES) $(EXTRA_tests_test_opus_padding_DEPENDENCIES) tests/$(am__dirstamp)
+ @rm -f tests/test_opus_padding$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(tests_test_opus_padding_OBJECTS) $(tests_test_opus_padding_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
+ -rm -f celt/arm/arm_celt_map.$(OBJEXT)
+ -rm -f celt/arm/arm_celt_map.lo
+ -rm -f celt/arm/armcpu.$(OBJEXT)
+ -rm -f celt/arm/armcpu.lo
+ -rm -f celt/arm/celt_pitch_xcorr_arm-gnu.$(OBJEXT)
+ -rm -f celt/arm/celt_pitch_xcorr_arm-gnu.lo
-rm -f celt/bands.$(OBJEXT)
-rm -f celt/bands.lo
-rm -f celt/celt.$(OBJEXT)
-rm -f celt/celt.lo
+ -rm -f celt/celt_decoder.$(OBJEXT)
+ -rm -f celt/celt_decoder.lo
+ -rm -f celt/celt_encoder.$(OBJEXT)
+ -rm -f celt/celt_encoder.lo
-rm -f celt/celt_lpc.$(OBJEXT)
-rm -f celt/celt_lpc.lo
-rm -f celt/cwrs.$(OBJEXT)
@@ -1656,6 +1829,12 @@
-rm -f silk/tables_pitch_lag.lo
-rm -f silk/tables_pulses_per_block.$(OBJEXT)
-rm -f silk/tables_pulses_per_block.lo
+ -rm -f src/analysis.$(OBJEXT)
+ -rm -f src/analysis.lo
+ -rm -f src/mlp.$(OBJEXT)
+ -rm -f src/mlp.lo
+ -rm -f src/mlp_data.$(OBJEXT)
+ -rm -f src/mlp_data.lo
-rm -f src/opus.$(OBJEXT)
-rm -f src/opus.lo
-rm -f src/opus_compare.$(OBJEXT)
@@ -1666,18 +1845,25 @@
-rm -f src/opus_encoder.lo
-rm -f src/opus_multistream.$(OBJEXT)
-rm -f src/opus_multistream.lo
+ -rm -f src/opus_multistream_decoder.$(OBJEXT)
+ -rm -f src/opus_multistream_decoder.lo
+ -rm -f src/opus_multistream_encoder.$(OBJEXT)
+ -rm -f src/opus_multistream_encoder.lo
-rm -f src/repacketizer.$(OBJEXT)
-rm -f src/repacketizer.lo
-rm -f src/repacketizer_demo.$(OBJEXT)
-rm -f tests/test_opus_api.$(OBJEXT)
-rm -f tests/test_opus_decode.$(OBJEXT)
-rm -f tests/test_opus_encode.$(OBJEXT)
+ -rm -f tests/test_opus_padding.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@celt/$(DEPDIR)/bands.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@celt/$(DEPDIR)/celt.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@celt/$(DEPDIR)/celt_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@celt/$(DEPDIR)/celt_encoder.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@celt/$(DEPDIR)/celt_lpc.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@celt/$(DEPDIR)/cwrs.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@celt/$(DEPDIR)/entcode.Plo@am__quote@
@@ -1693,6 +1879,9 @@
@AMDEP_TRUE@@am__include@ @am__quote@celt/$(DEPDIR)/quant_bands.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@celt/$(DEPDIR)/rate.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@celt/$(DEPDIR)/vq.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@celt/arm/$(DEPDIR)/arm_celt_map.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@celt/arm/$(DEPDIR)/armcpu.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@celt/arm/$(DEPDIR)/celt_pitch_xcorr_arm-gnu.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@celt/tests/$(DEPDIR)/test_unit_cwrs32.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@celt/tests/$(DEPDIR)/test_unit_dft.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@celt/tests/$(DEPDIR)/test_unit_entropy.Po@am__quote@
@@ -1833,17 +2022,47 @@
@AMDEP_TRUE@@am__include@ @am__quote@silk/float/$(DEPDIR)/sort_FLP.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@silk/float/$(DEPDIR)/warped_autocorrelation_FLP.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@silk/float/$(DEPDIR)/wrappers_FLP.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/analysis.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/mlp.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/mlp_data.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/opus.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/opus_compare.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/opus_decoder.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/opus_demo.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/opus_encoder.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/opus_multistream.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/opus_multistream_decoder.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/opus_multistream_encoder.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/repacketizer.Plo@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@src/$(DEPDIR)/repacketizer_demo.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/test_opus_api.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/test_opus_decode.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/test_opus_encode.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@tests/$(DEPDIR)/test_opus_padding.Po@am__quote@
+
+.S.o:
+@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCCAS_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(CPPASCOMPILE) -c -o $@ $<
+
+.S.obj:
+@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
+@am__fastdepCCAS_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.S.lo:
+@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
+@am__fastdepCCAS_TRUE@ $(LTCPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCCAS_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(LTCPPASCOMPILE) -c -o $@ $<
.c.o:
@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@@ -1875,6 +2094,7 @@
clean-libtool:
-rm -rf .libs _libs
-rm -rf celt/.libs celt/_libs
+ -rm -rf celt/arm/.libs celt/arm/_libs
-rm -rf celt/tests/.libs celt/tests/_libs
-rm -rf silk/.libs silk/_libs
-rm -rf silk/fixed/.libs silk/fixed/_libs
@@ -2233,6 +2453,9 @@
|| exit 1; \
fi; \
done
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-hook
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
@@ -2365,7 +2588,8 @@
exit 1; } >&2
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-recursive
+check: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(DATA) $(HEADERS) \
config.h all-local
installdirs: installdirs-recursive
@@ -2373,7 +2597,8 @@
for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(pkgincludedir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
-install: install-recursive
+install: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
@@ -2395,12 +2620,15 @@
mostlyclean-generic:
clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-rm -f celt/$(DEPDIR)/$(am__dirstamp)
-rm -f celt/$(am__dirstamp)
+ -rm -f celt/arm/$(DEPDIR)/$(am__dirstamp)
+ -rm -f celt/arm/$(am__dirstamp)
-rm -f celt/tests/$(DEPDIR)/$(am__dirstamp)
-rm -f celt/tests/$(am__dirstamp)
-rm -f silk/$(DEPDIR)/$(am__dirstamp)
@@ -2417,6 +2645,7 @@
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
+ -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-recursive
clean-am: clean-generic clean-libLTLIBRARIES clean-libtool clean-local \
@@ -2424,7 +2653,7 @@
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf celt/$(DEPDIR) celt/tests/$(DEPDIR) silk/$(DEPDIR) silk/fixed/$(DEPDIR) silk/float/$(DEPDIR) src/$(DEPDIR) tests/$(DEPDIR)
+ -rm -rf celt/$(DEPDIR) celt/arm/$(DEPDIR) celt/tests/$(DEPDIR) silk/$(DEPDIR) silk/fixed/$(DEPDIR) silk/float/$(DEPDIR) src/$(DEPDIR) tests/$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-hdr distclean-libtool distclean-tags
@@ -2473,7 +2702,7 @@
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
- -rm -rf celt/$(DEPDIR) celt/tests/$(DEPDIR) silk/$(DEPDIR) silk/fixed/$(DEPDIR) silk/float/$(DEPDIR) src/$(DEPDIR) tests/$(DEPDIR)
+ -rm -rf celt/$(DEPDIR) celt/arm/$(DEPDIR) celt/tests/$(DEPDIR) silk/$(DEPDIR) silk/fixed/$(DEPDIR) silk/float/$(DEPDIR) src/$(DEPDIR) tests/$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
@@ -2494,15 +2723,16 @@
uninstall-m4dataDATA uninstall-pkgconfigDATA \
uninstall-pkgincludeHEADERS
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check-am \
- ctags-recursive install-am install-strip tags-recursive
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
+ check-am ctags-recursive install install-am install-strip \
+ tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am all-local am--refresh check check-TESTS check-am \
clean clean-generic clean-libLTLIBRARIES clean-libtool \
clean-local clean-noinstPROGRAMS ctags ctags-recursive dist \
- dist-all dist-bzip2 dist-gzip dist-lzip dist-lzma dist-shar \
- dist-tarZ dist-xz dist-zip distcheck distclean \
+ dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-lzma \
+ dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \
distclean-compile distclean-generic distclean-hdr \
distclean-libtool distclean-tags distcleancheck distdir \
distuninstallcheck dvi dvi-am html html-am info info-am \
@@ -2521,6 +2751,10 @@
uninstall-pkgincludeHEADERS
+# Provide the full test output for failed tests when using the parallel
+# test suite (which is enabled by default with automake 1.13+).
+export VERBOSE = yes
+
# Targets to build and install just the library without the docs
opus check-opus install-opus: export NO_DOXYGEN = 1
@@ -2548,8 +2782,54 @@
uninstall-local:
( cd doc && $(MAKE) $(AM_MAKEFLAGS) uninstall )
+# We check this every time make is run, with configure.ac being touched to
+# trigger an update of the build system files if update_version changes the
+# current PACKAGE_VERSION (or if package_version was modified manually by a
+# user with either AUTO_UPDATE=no or no update_version script present - the
+# latter being the normal case for tarball releases).
+#
+# We can't just add the package_version file to CONFIGURE_DEPENDENCIES since
+# simply running autoconf will not actually regenerate configure for us when
+# the content of that file changes (due to autoconf dependency checking not
+# knowing about that without us creating yet another file for it to include).
+#
+# The MAKECMDGOALS check is a gnu-make'ism, but will degrade 'gracefully' for
+# makes that don't support it. The only loss of functionality is not forcing
+# an update of package_version for `make dist` if AUTO_UPDATE=no, but that is
+# unlikely to be a real problem for any real user.
+$(top_srcdir)/configure.ac: force
+ @case "$(MAKECMDGOALS)" in \
+ dist-hook) exit 0 ;; \
+ dist-* | dist | distcheck | distclean) _arg=release ;; \
+ esac; \
+ if ! $(top_srcdir)/update_version $$_arg 2> /dev/null; then \
+ if [ ! -e $(top_srcdir)/package_version ]; then \
+ echo 'PACKAGE_VERSION="unknown"' > $(top_srcdir)/package_version; \
+ fi; \
+ . $(top_srcdir)/package_version || exit 1; \
+ [ "$(PACKAGE_VERSION)" != "$$PACKAGE_VERSION" ] || exit 0; \
+ fi; \
+ touch $@
+
+force:
+
+# Create a minimal package_version file when make dist is run.
+dist-hook:
+ echo 'PACKAGE_VERSION="$(PACKAGE_VERSION)"' > $(top_distdir)/package_version
+
.PHONY: opus check-opus install-opus docs install-docs
+# automake doesn't do dependency tracking for asm files, that I can tell
+$(CELT_SOURCES_ARM_ASM:%.s=%-gnu.S): celt/arm/armopts-gnu.S
+$(CELT_SOURCES_ARM_ASM:%.s=%-gnu.S): $(top_srcdir)/celt/arm/arm2gnu.pl
+
+# convert ARM asm to GNU as format
+%-gnu.S: $(top_srcdir)/%.s
+ $(top_srcdir)/celt/arm/arm2gnu.pl < $< > $@
+# For autoconf-modified sources (e.g., armopts.s)
+%-gnu.S: %.s
+ $(top_srcdir)/celt/arm/arm2gnu.pl < $< > $@
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/Makefile.unix b/Makefile.unix
index c0bab7c..36fd337 100644
--- a/Makefile.unix
+++ b/Makefile.unix
@@ -12,11 +12,7 @@
# These options affect performance
# HAVE_LRINTF: Use C99 intrinsics to speed up float-to-int conversion
-# inline: Don't use the 'inline' keyword (for ANSI C compilers)
-# restrict: Don't use the 'restrict' keyword (for pre-C99 compilers)
#CFLAGS := -DHAVE_LRINTF $(CFLAGS)
-#CFLAGS := -Dinline= $(CFLAGS)
-CFLAGS := -Drestrict= $(CFLAGS)
###################### END OF OPTIONS ######################
diff --git a/aclocal.m4 b/aclocal.m4
index 3b2c931..5a41d55 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -20,8597 +20,6 @@
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically `autoreconf'.])])
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-m4_define([_LT_COPYING], [dnl
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
-#
-# This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-])
-
-# serial 57 LT_INIT
-
-
-# LT_PREREQ(VERSION)
-# ------------------
-# Complain and exit if this libtool version is less that VERSION.
-m4_defun([LT_PREREQ],
-[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
- [m4_default([$3],
- [m4_fatal([Libtool version $1 or higher is required],
- 63)])],
- [$2])])
-
-
-# _LT_CHECK_BUILDDIR
-# ------------------
-# Complain if the absolute build directory name contains unusual characters
-m4_defun([_LT_CHECK_BUILDDIR],
-[case `pwd` in
- *\ * | *\ *)
- AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
-esac
-])
-
-
-# LT_INIT([OPTIONS])
-# ------------------
-AC_DEFUN([LT_INIT],
-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
-AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
-AC_BEFORE([$0], [LT_LANG])dnl
-AC_BEFORE([$0], [LT_OUTPUT])dnl
-AC_BEFORE([$0], [LTDL_INIT])dnl
-m4_require([_LT_CHECK_BUILDDIR])dnl
-
-dnl Autoconf doesn't catch unexpanded LT_ macros by default:
-m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
-m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
-dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
-dnl unless we require an AC_DEFUNed macro:
-AC_REQUIRE([LTOPTIONS_VERSION])dnl
-AC_REQUIRE([LTSUGAR_VERSION])dnl
-AC_REQUIRE([LTVERSION_VERSION])dnl
-AC_REQUIRE([LTOBSOLETE_VERSION])dnl
-m4_require([_LT_PROG_LTMAIN])dnl
-
-_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
-
-dnl Parse OPTIONS
-_LT_SET_OPTIONS([$0], [$1])
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-_LT_SETUP
-
-# Only expand once:
-m4_define([LT_INIT])
-])# LT_INIT
-
-# Old names:
-AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
-AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
-dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
-m4_defun([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
- case $cc_temp in
- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
-])
-
-
-# _LT_FILEUTILS_DEFAULTS
-# ----------------------
-# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
-m4_defun([_LT_FILEUTILS_DEFAULTS],
-[: ${CP="cp -f"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-])# _LT_FILEUTILS_DEFAULTS
-
-
-# _LT_SETUP
-# ---------
-m4_defun([_LT_SETUP],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
-AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
-
-_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
-dnl
-_LT_DECL([], [host_alias], [0], [The host system])dnl
-_LT_DECL([], [host], [0])dnl
-_LT_DECL([], [host_os], [0])dnl
-dnl
-_LT_DECL([], [build_alias], [0], [The build system])dnl
-_LT_DECL([], [build], [0])dnl
-_LT_DECL([], [build_os], [0])dnl
-dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-test -z "$LN_S" && LN_S="ln -s"
-_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
-dnl
-AC_REQUIRE([LT_CMD_MAX_LEN])dnl
-_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
-_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
-dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
-m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
-m4_require([_LT_CMD_RELOAD])dnl
-m4_require([_LT_CHECK_MAGIC_METHOD])dnl
-m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
-m4_require([_LT_CMD_OLD_ARCHIVE])dnl
-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-m4_require([_LT_WITH_SYSROOT])dnl
-
-_LT_CONFIG_LIBTOOL_INIT([
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
-fi
-])
-if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
-fi
-
-_LT_CHECK_OBJDIR
-
-m4_require([_LT_TAG_COMPILER])dnl
-
-case $host_os in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
- fi
- ;;
-esac
-
-# Global variables:
-ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$LD" && LD=ld
-test -z "$ac_objext" && ac_objext=o
-
-_LT_CC_BASENAME([$compiler])
-
-# Only perform the check for file, if the check method requires it
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- _LT_PATH_MAGIC
- fi
- ;;
-esac
-
-# Use C for the default configuration in the libtool script
-LT_SUPPORTED_TAG([CC])
-_LT_LANG_C_CONFIG
-_LT_LANG_DEFAULT_CONFIG
-_LT_CONFIG_COMMANDS
-])# _LT_SETUP
-
-
-# _LT_PREPARE_SED_QUOTE_VARS
-# --------------------------
-# Define a few sed substitution that help us do robust quoting.
-m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
-[# Backslashify metacharacters that are still active within
-# double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-])
-
-# _LT_PROG_LTMAIN
-# ---------------
-# Note that this code is called both from `configure', and `config.status'
-# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
-# so we pass a copy along to make sure it has a sensible value anyway.
-m4_defun([_LT_PROG_LTMAIN],
-[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
-_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
-ltmain="$ac_aux_dir/ltmain.sh"
-])# _LT_PROG_LTMAIN
-
-
-
-# So that we can recreate a full libtool script including additional
-# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
-# label.
-
-
-# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
-# ----------------------------------------
-# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL_INIT],
-[m4_ifval([$1],
- [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
- [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_INIT])
-
-
-# _LT_CONFIG_LIBTOOL([COMMANDS])
-# ------------------------------
-# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL],
-[m4_ifval([$1],
- [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
- [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
-
-
-# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
-# -----------------------------------------------------
-m4_defun([_LT_CONFIG_SAVE_COMMANDS],
-[_LT_CONFIG_LIBTOOL([$1])
-_LT_CONFIG_LIBTOOL_INIT([$2])
-])
-
-
-# _LT_FORMAT_COMMENT([COMMENT])
-# -----------------------------
-# Add leading comment marks to the start of each line, and a trailing
-# full-stop to the whole comment if one is not present already.
-m4_define([_LT_FORMAT_COMMENT],
-[m4_ifval([$1], [
-m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
- [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
-)])
-
-
-
-
-
-# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
-# -------------------------------------------------------------------
-# CONFIGNAME is the name given to the value in the libtool script.
-# VARNAME is the (base) name used in the configure script.
-# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
-# VARNAME. Any other value will be used directly.
-m4_define([_LT_DECL],
-[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
- [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
- [m4_ifval([$1], [$1], [$2])])
- lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
- m4_ifval([$4],
- [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
- lt_dict_add_subkey([lt_decl_dict], [$2],
- [tagged?], [m4_ifval([$5], [yes], [no])])])
-])
-
-
-# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
-# --------------------------------------------------------
-m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
-
-
-# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_tag_varnames],
-[_lt_decl_filter([tagged?], [yes], $@)])
-
-
-# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
-# ---------------------------------------------------------
-m4_define([_lt_decl_filter],
-[m4_case([$#],
- [0], [m4_fatal([$0: too few arguments: $#])],
- [1], [m4_fatal([$0: too few arguments: $#: $1])],
- [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
- [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
- [lt_dict_filter([lt_decl_dict], $@)])[]dnl
-])
-
-
-# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
-# --------------------------------------------------
-m4_define([lt_decl_quote_varnames],
-[_lt_decl_filter([value], [1], $@)])
-
-
-# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_dquote_varnames],
-[_lt_decl_filter([value], [2], $@)])
-
-
-# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_varnames_tagged],
-[m4_assert([$# <= 2])dnl
-_$0(m4_quote(m4_default([$1], [[, ]])),
- m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
- m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
-m4_define([_lt_decl_varnames_tagged],
-[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
-
-
-# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_all_varnames],
-[_$0(m4_quote(m4_default([$1], [[, ]])),
- m4_if([$2], [],
- m4_quote(lt_decl_varnames),
- m4_quote(m4_shift($@))))[]dnl
-])
-m4_define([_lt_decl_all_varnames],
-[lt_join($@, lt_decl_varnames_tagged([$1],
- lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
-])
-
-
-# _LT_CONFIG_STATUS_DECLARE([VARNAME])
-# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'. VARNAME
-# must have a single quote delimited value for this to work.
-m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
-
-
-# _LT_CONFIG_STATUS_DECLARATIONS
-# ------------------------------
-# We delimit libtool config variables with single quotes, so when
-# we write them to config.status, we have to be sure to quote all
-# embedded single quotes properly. In configure, this macro expands
-# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
-#
-# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
-m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
- [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
-
-
-# _LT_LIBTOOL_TAGS
-# ----------------
-# Output comment and list of tags supported by the script
-m4_defun([_LT_LIBTOOL_TAGS],
-[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-available_tags="_LT_TAGS"dnl
-])
-
-
-# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
-# -----------------------------------
-# Extract the dictionary values for VARNAME (optionally with TAG) and
-# expand to a commented shell variable setting:
-#
-# # Some comment about what VAR is for.
-# visible_name=$lt_internal_name
-m4_define([_LT_LIBTOOL_DECLARE],
-[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
- [description])))[]dnl
-m4_pushdef([_libtool_name],
- m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
-m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
- [0], [_libtool_name=[$]$1],
- [1], [_libtool_name=$lt_[]$1],
- [2], [_libtool_name=$lt_[]$1],
- [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
-m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
-])
-
-
-# _LT_LIBTOOL_CONFIG_VARS
-# -----------------------
-# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
-# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
-# section) are produced by _LT_LIBTOOL_TAG_VARS.
-m4_defun([_LT_LIBTOOL_CONFIG_VARS],
-[m4_foreach([_lt_var],
- m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
- [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
-
-
-# _LT_LIBTOOL_TAG_VARS(TAG)
-# -------------------------
-m4_define([_LT_LIBTOOL_TAG_VARS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
- [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
-
-
-# _LT_TAGVAR(VARNAME, [TAGNAME])
-# ------------------------------
-m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
-
-
-# _LT_CONFIG_COMMANDS
-# -------------------
-# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
-# variables for single and double quote escaping we saved from calls
-# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'. Finally, any additional code accumulated
-# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
-m4_defun([_LT_CONFIG_COMMANDS],
-[AC_PROVIDE_IFELSE([LT_OUTPUT],
- dnl If the libtool generation code has been placed in $CONFIG_LT,
- dnl instead of duplicating it all over again into config.status,
- dnl then we will have config.status run $CONFIG_LT later, so it
- dnl needs to know what name is stored there:
- [AC_CONFIG_COMMANDS([libtool],
- [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
- dnl If the libtool generation code is destined for config.status,
- dnl expand the accumulated commands and init code now:
- [AC_CONFIG_COMMANDS([libtool],
- [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
-])#_LT_CONFIG_COMMANDS
-
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
-[
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-sed_quote_subst='$sed_quote_subst'
-double_quote_subst='$double_quote_subst'
-delay_variable_subst='$delay_variable_subst'
-_LT_CONFIG_STATUS_DECLARATIONS
-LTCC='$LTCC'
-LTCFLAGS='$LTCFLAGS'
-compiler='$compiler_DEFAULT'
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
- eval 'cat <<_LTECHO_EOF
-\$[]1
-_LTECHO_EOF'
-}
-
-# Quote evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_quote_varnames); do
- case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
- *[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
- ;;
- *)
- eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
- ;;
- esac
-done
-
-# Double-quote double-evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_dquote_varnames); do
- case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
- *[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
- ;;
- *)
- eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
- ;;
- esac
-done
-
-_LT_OUTPUT_LIBTOOL_INIT
-])
-
-# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
-# ------------------------------------
-# Generate a child script FILE with all initialization necessary to
-# reuse the environment learned by the parent script, and make the
-# file executable. If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins. After this
-# macro, additional text can be appended to FILE to form the body of
-# the child script. The macro ends with non-zero status if the
-# file could not be fully written (such as if the disk is full).
-m4_ifdef([AS_INIT_GENERATED],
-[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
-[m4_defun([_LT_GENERATED_FILE_INIT],
-[m4_require([AS_PREPARE])]dnl
-[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
-[lt_write_fail=0
-cat >$1 <<_ASEOF || lt_write_fail=1
-#! $SHELL
-# Generated by $as_me.
-$2
-SHELL=\${CONFIG_SHELL-$SHELL}
-export SHELL
-_ASEOF
-cat >>$1 <<\_ASEOF || lt_write_fail=1
-AS_SHELL_SANITIZE
-_AS_PREPARE
-exec AS_MESSAGE_FD>&1
-_ASEOF
-test $lt_write_fail = 0 && chmod +x $1[]dnl
-m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
-
-# LT_OUTPUT
-# ---------
-# This macro allows early generation of the libtool script (before
-# AC_OUTPUT is called), incase it is used in configure for compilation
-# tests.
-AC_DEFUN([LT_OUTPUT],
-[: ${CONFIG_LT=./config.lt}
-AC_MSG_NOTICE([creating $CONFIG_LT])
-_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
-[# Run this file to recreate a libtool stub with the current configuration.])
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-lt_cl_silent=false
-exec AS_MESSAGE_LOG_FD>>config.log
-{
- echo
- AS_BOX([Running $as_me.])
-} >&AS_MESSAGE_LOG_FD
-
-lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
-for use in further configure time tests before the real libtool is
-generated.
-
-Usage: $[0] [[OPTIONS]]
-
- -h, --help print this help, then exit
- -V, --version print version number, then exit
- -q, --quiet do not print progress messages
- -d, --debug don't remove temporary files
-
-Report bugs to <[email protected]>."
-
-lt_cl_version="\
-m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
-m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
-configured by $[0], generated by m4_PACKAGE_STRING.
-
-Copyright (C) 2011 Free Software Foundation, Inc.
-This config.lt script is free software; the Free Software Foundation
-gives unlimited permision to copy, distribute and modify it."
-
-while test $[#] != 0
-do
- case $[1] in
- --version | --v* | -V )
- echo "$lt_cl_version"; exit 0 ;;
- --help | --h* | -h )
- echo "$lt_cl_help"; exit 0 ;;
- --debug | --d* | -d )
- debug=: ;;
- --quiet | --q* | --silent | --s* | -q )
- lt_cl_silent=: ;;
-
- -*) AC_MSG_ERROR([unrecognized option: $[1]
-Try \`$[0] --help' for more information.]) ;;
-
- *) AC_MSG_ERROR([unrecognized argument: $[1]
-Try \`$[0] --help' for more information.]) ;;
- esac
- shift
-done
-
-if $lt_cl_silent; then
- exec AS_MESSAGE_FD>/dev/null
-fi
-_LTEOF
-
-cat >>"$CONFIG_LT" <<_LTEOF
-_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
-_LTEOF
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-AC_MSG_NOTICE([creating $ofile])
-_LT_OUTPUT_LIBTOOL_COMMANDS
-AS_EXIT(0)
-_LTEOF
-chmod +x "$CONFIG_LT"
-
-# configure is writing to config.log, but config.lt does its own redirection,
-# appending to config.log, which fails on DOS, as config.log is still kept
-# open by configure. Here we exec the FD to /dev/null, effectively closing
-# config.log, so it can be properly (re)opened and appended to by config.lt.
-lt_cl_success=:
-test "$silent" = yes &&
- lt_config_lt_args="$lt_config_lt_args --quiet"
-exec AS_MESSAGE_LOG_FD>/dev/null
-$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
-exec AS_MESSAGE_LOG_FD>>config.log
-$lt_cl_success || AS_EXIT(1)
-])# LT_OUTPUT
-
-
-# _LT_CONFIG(TAG)
-# ---------------
-# If TAG is the built-in tag, create an initial libtool script with a
-# default configuration from the untagged config vars. Otherwise add code
-# to config.status for appending the configuration named by TAG from the
-# matching tagged config vars.
-m4_defun([_LT_CONFIG],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_CONFIG_SAVE_COMMANDS([
- m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
- m4_if(_LT_TAG, [C], [
- # See if we are running on zsh, and set the options which allow our
- # commands through without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
-
- cfgfile="${ofile}T"
- trap "$RM \"$cfgfile\"; exit 1" 1 2 15
- $RM "$cfgfile"
-
- cat <<_LT_EOF >> "$cfgfile"
-#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-_LT_COPYING
-_LT_LIBTOOL_TAGS
-
-# ### BEGIN LIBTOOL CONFIG
-_LT_LIBTOOL_CONFIG_VARS
-_LT_LIBTOOL_TAG_VARS
-# ### END LIBTOOL CONFIG
-
-_LT_EOF
-
- case $host_os in
- aix3*)
- cat <<\_LT_EOF >> "$cfgfile"
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-_LT_EOF
- ;;
- esac
-
- _LT_PROG_LTMAIN
-
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
- sed '$q' "$ltmain" >> "$cfgfile" \
- || (rm -f "$cfgfile"; exit 1)
-
- _LT_PROG_REPLACE_SHELLFNS
-
- mv -f "$cfgfile" "$ofile" ||
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-],
-[cat <<_LT_EOF >> "$ofile"
-
-dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
-dnl in a comment (ie after a #).
-# ### BEGIN LIBTOOL TAG CONFIG: $1
-_LT_LIBTOOL_TAG_VARS(_LT_TAG)
-# ### END LIBTOOL TAG CONFIG: $1
-_LT_EOF
-])dnl /m4_if
-],
-[m4_if([$1], [], [
- PACKAGE='$PACKAGE'
- VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
- RM='$RM'
- ofile='$ofile'], [])
-])dnl /_LT_CONFIG_SAVE_COMMANDS
-])# _LT_CONFIG
-
-
-# LT_SUPPORTED_TAG(TAG)
-# ---------------------
-# Trace this macro to discover what tags are supported by the libtool
-# --tag option, using:
-# autoconf --trace 'LT_SUPPORTED_TAG:$1'
-AC_DEFUN([LT_SUPPORTED_TAG], [])
-
-
-# C support is built-in for now
-m4_define([_LT_LANG_C_enabled], [])
-m4_define([_LT_TAGS], [])
-
-
-# LT_LANG(LANG)
-# -------------
-# Enable libtool support for the given language if not already enabled.
-AC_DEFUN([LT_LANG],
-[AC_BEFORE([$0], [LT_OUTPUT])dnl
-m4_case([$1],
- [C], [_LT_LANG(C)],
- [C++], [_LT_LANG(CXX)],
- [Go], [_LT_LANG(GO)],
- [Java], [_LT_LANG(GCJ)],
- [Fortran 77], [_LT_LANG(F77)],
- [Fortran], [_LT_LANG(FC)],
- [Windows Resource], [_LT_LANG(RC)],
- [m4_ifdef([_LT_LANG_]$1[_CONFIG],
- [_LT_LANG($1)],
- [m4_fatal([$0: unsupported language: "$1"])])])dnl
-])# LT_LANG
-
-
-# _LT_LANG(LANGNAME)
-# ------------------
-m4_defun([_LT_LANG],
-[m4_ifdef([_LT_LANG_]$1[_enabled], [],
- [LT_SUPPORTED_TAG([$1])dnl
- m4_append([_LT_TAGS], [$1 ])dnl
- m4_define([_LT_LANG_]$1[_enabled], [])dnl
- _LT_LANG_$1_CONFIG($1)])dnl
-])# _LT_LANG
-
-
-m4_ifndef([AC_PROG_GO], [
-# NOTE: This macro has been submitted for inclusion into #
-# GNU Autoconf as AC_PROG_GO. When it is available in #
-# a released version of Autoconf we should remove this #
-# macro and use it instead. #
-m4_defun([AC_PROG_GO],
-[AC_LANG_PUSH(Go)dnl
-AC_ARG_VAR([GOC], [Go compiler command])dnl
-AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
-_AC_ARG_VAR_LDFLAGS()dnl
-AC_CHECK_TOOL(GOC, gccgo)
-if test -z "$GOC"; then
- if test -n "$ac_tool_prefix"; then
- AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
- fi
-fi
-if test -z "$GOC"; then
- AC_CHECK_PROG(GOC, gccgo, gccgo, false)
-fi
-])#m4_defun
-])#m4_ifndef
-
-
-# _LT_LANG_DEFAULT_CONFIG
-# -----------------------
-m4_defun([_LT_LANG_DEFAULT_CONFIG],
-[AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [LT_LANG(CXX)],
- [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
-
-AC_PROVIDE_IFELSE([AC_PROG_F77],
- [LT_LANG(F77)],
- [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
-
-AC_PROVIDE_IFELSE([AC_PROG_FC],
- [LT_LANG(FC)],
- [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
-
-dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
-dnl pulling things in needlessly.
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],
- [LT_LANG(GCJ)],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
- [LT_LANG(GCJ)],
- [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
- [LT_LANG(GCJ)],
- [m4_ifdef([AC_PROG_GCJ],
- [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
- m4_ifdef([A][M_PROG_GCJ],
- [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
- m4_ifdef([LT_PROG_GCJ],
- [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
-
-AC_PROVIDE_IFELSE([AC_PROG_GO],
- [LT_LANG(GO)],
- [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
-
-AC_PROVIDE_IFELSE([LT_PROG_RC],
- [LT_LANG(RC)],
- [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
-])# _LT_LANG_DEFAULT_CONFIG
-
-# Obsolete macros:
-AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
-AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
-AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
-AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
-AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
-dnl AC_DEFUN([AC_LIBTOOL_F77], [])
-dnl AC_DEFUN([AC_LIBTOOL_FC], [])
-dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
-dnl AC_DEFUN([AC_LIBTOOL_RC], [])
-
-
-# _LT_TAG_COMPILER
-# ----------------
-m4_defun([_LT_TAG_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
-_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
-_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
-_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_TAG_COMPILER
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-m4_defun([_LT_COMPILER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
-])# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-m4_defun([_LT_LINKER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$RM -r conftest*
-])# _LT_LINKER_BOILERPLATE
-
-# _LT_REQUIRED_DARWIN_CHECKS
-# -------------------------
-m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
- case $host_os in
- rhapsody* | darwin*)
- AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
- AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
- AC_CHECK_TOOL([LIPO], [lipo], [:])
- AC_CHECK_TOOL([OTOOL], [otool], [:])
- AC_CHECK_TOOL([OTOOL64], [otool64], [:])
- _LT_DECL([], [DSYMUTIL], [1],
- [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
- _LT_DECL([], [NMEDIT], [1],
- [Tool to change global to local symbols on Mac OS X])
- _LT_DECL([], [LIPO], [1],
- [Tool to manipulate fat objects and archives on Mac OS X])
- _LT_DECL([], [OTOOL], [1],
- [ldd/readelf like tool for Mach-O binaries on Mac OS X])
- _LT_DECL([], [OTOOL64], [1],
- [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
-
- AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
- [lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
- # By default we will add the -single_module flag. You can override
- # by either setting the environment variable LT_MULTI_MODULE
- # non-empty at configure time, or by adding -multi_module to the
- # link flags.
- rm -rf libconftest.dylib*
- echo "int foo(void){return 1;}" > conftest.c
- echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
--dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
- $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
- -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
- _lt_result=$?
- # If there is a non-empty error log, and "single_module"
- # appears in it, assume the flag caused a linker warning
- if test -s conftest.err && $GREP single_module conftest.err; then
- cat conftest.err >&AS_MESSAGE_LOG_FD
- # Otherwise, if the output was created with a 0 exit code from
- # the compiler, it worked.
- elif test -f libconftest.dylib && test $_lt_result -eq 0; then
- lt_cv_apple_cc_single_mod=yes
- else
- cat conftest.err >&AS_MESSAGE_LOG_FD
- fi
- rm -rf libconftest.dylib*
- rm -f conftest.*
- fi])
-
- AC_CACHE_CHECK([for -exported_symbols_list linker flag],
- [lt_cv_ld_exported_symbols_list],
- [lt_cv_ld_exported_symbols_list=no
- save_LDFLAGS=$LDFLAGS
- echo "_main" > conftest.sym
- LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
- [lt_cv_ld_exported_symbols_list=yes],
- [lt_cv_ld_exported_symbols_list=no])
- LDFLAGS="$save_LDFLAGS"
- ])
-
- AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
- [lt_cv_ld_force_load=no
- cat > conftest.c << _LT_EOF
-int forced_loaded() { return 2;}
-_LT_EOF
- echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
- $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
- echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
- $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
- echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
- $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
- cat > conftest.c << _LT_EOF
-int main() { return 0;}
-_LT_EOF
- echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
- $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
- _lt_result=$?
- if test -s conftest.err && $GREP force_load conftest.err; then
- cat conftest.err >&AS_MESSAGE_LOG_FD
- elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
- lt_cv_ld_force_load=yes
- else
- cat conftest.err >&AS_MESSAGE_LOG_FD
- fi
- rm -f conftest.err libconftest.a conftest conftest.c
- rm -rf conftest.dSYM
- ])
- case $host_os in
- rhapsody* | darwin1.[[012]])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
- darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- darwin*) # darwin 5.x on
- # if running on 10.5 or later, the deployment target defaults
- # to the OS version, if on x86, and 10.4, the deployment
- # target defaults to 10.4. Don't you love it?
- case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
- 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[[012]]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
- 10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- esac
- ;;
- esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
- _lt_dar_single_mod='$single_module'
- fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
- else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
- fi
- if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
- _lt_dsymutil='~$DSYMUTIL $lib || :'
- else
- _lt_dsymutil=
- fi
- ;;
- esac
-])
-
-
-# _LT_DARWIN_LINKER_FEATURES([TAG])
-# ---------------------------------
-# Checks for linker and compiler features on darwin
-m4_defun([_LT_DARWIN_LINKER_FEATURES],
-[
- m4_require([_LT_REQUIRED_DARWIN_CHECKS])
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_automatic, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- if test "$lt_cv_ld_force_load" = "yes"; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
- m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
- [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
- else
- _LT_TAGVAR(whole_archive_flag_spec, $1)=''
- fi
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
- case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
- *) _lt_dar_can_shared=$GCC ;;
- esac
- if test "$_lt_dar_can_shared" = "yes"; then
- output_verbose_link_cmd=func_echo_all
- _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
- m4_if([$1], [CXX],
-[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
- _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
- fi
-],[])
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
-])
-
-# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
-# ----------------------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-# Store the results from the different compilers for each TAGNAME.
-# Allow to override them for all tags through lt_cv_aix_libpath.
-m4_defun([_LT_SYS_MODULE_PATH_AIX],
-[m4_require([_LT_DECL_SED])dnl
-if test "${lt_cv_aix_libpath+set}" = set; then
- aix_libpath=$lt_cv_aix_libpath
-else
- AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
- [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
- lt_aix_libpath_sed='[
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\([^ ]*\) *$/\1/
- p
- }
- }]'
- _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
- # Check for a 64-bit object if we didn't find anything.
- if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
- _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
- fi],[])
- if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
- _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
- fi
- ])
- aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
-fi
-])# _LT_SYS_MODULE_PATH_AIX
-
-
-# _LT_SHELL_INIT(ARG)
-# -------------------
-m4_define([_LT_SHELL_INIT],
-[m4_divert_text([M4SH-INIT], [$1
-])])# _LT_SHELL_INIT
-
-
-
-# _LT_PROG_ECHO_BACKSLASH
-# -----------------------
-# Find how we can fake an echo command that does not interpret backslash.
-# In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
-m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
-ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
-
-AC_MSG_CHECKING([how to print strings])
-# Test print first, because it will be a builtin if present.
-if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
- test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
- ECHO='print -r --'
-elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
- ECHO='printf %s\n'
-else
- # Use this function as a fallback that always works.
- func_fallback_echo ()
- {
- eval 'cat <<_LTECHO_EOF
-$[]1
-_LTECHO_EOF'
- }
- ECHO='func_fallback_echo'
-fi
-
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
- $ECHO "$*"
-}
-
-case "$ECHO" in
- printf*) AC_MSG_RESULT([printf]) ;;
- print*) AC_MSG_RESULT([print -r]) ;;
- *) AC_MSG_RESULT([cat]) ;;
-esac
-
-m4_ifdef([_AS_DETECT_SUGGESTED],
-[_AS_DETECT_SUGGESTED([
- test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
- ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
- ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
- ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
- PATH=/empty FPATH=/empty; export PATH FPATH
- test "X`printf %s $ECHO`" = "X$ECHO" \
- || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
-
-_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
-])# _LT_PROG_ECHO_BACKSLASH
-
-
-# _LT_WITH_SYSROOT
-# ----------------
-AC_DEFUN([_LT_WITH_SYSROOT],
-[AC_MSG_CHECKING([for sysroot])
-AC_ARG_WITH([sysroot],
-[ --with-sysroot[=DIR] Search for dependent libraries within DIR
- (or the compiler's sysroot if not specified).],
-[], [with_sysroot=no])
-
-dnl lt_sysroot will always be passed unquoted. We quote it here
-dnl in case the user passed a directory name.
-lt_sysroot=
-case ${with_sysroot} in #(
- yes)
- if test "$GCC" = yes; then
- lt_sysroot=`$CC --print-sysroot 2>/dev/null`
- fi
- ;; #(
- /*)
- lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
- ;; #(
- no|'')
- ;; #(
- *)
- AC_MSG_RESULT([${with_sysroot}])
- AC_MSG_ERROR([The sysroot must be an absolute path.])
- ;;
-esac
-
- AC_MSG_RESULT([${lt_sysroot:-no}])
-_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
-[dependent libraries, and in which our libraries should be installed.])])
-
-# _LT_ENABLE_LOCK
-# ---------------
-m4_defun([_LT_ENABLE_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
- [AS_HELP_STRING([--disable-libtool-lock],
- [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- fi
- rm -rf conftest*
- ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_i386_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*|s390*-*tpf*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_LANG_PUSH(C)
- AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
- AC_LANG_POP])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-*-*solaris*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *64-bit*)
- case $lt_cv_prog_gnu_ld in
- yes*)
- case $host in
- i?86-*-solaris*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- sparc*-*-solaris*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
- if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
- LD="${LD-ld}_sol2"
- fi
- ;;
- *)
- if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
- LD="${LD-ld} -64"
- fi
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-esac
-
-need_locks="$enable_libtool_lock"
-])# _LT_ENABLE_LOCK
-
-
-# _LT_PROG_AR
-# -----------
-m4_defun([_LT_PROG_AR],
-[AC_CHECK_TOOLS(AR, [ar], false)
-: ${AR=ar}
-: ${AR_FLAGS=cru}
-_LT_DECL([], [AR], [1], [The archiver])
-_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
-
-AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
- [lt_cv_ar_at_file=no
- AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
- [echo conftest.$ac_objext > conftest.lst
- lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
- AC_TRY_EVAL([lt_ar_try])
- if test "$ac_status" -eq 0; then
- # Ensure the archiver fails upon bogus file names.
- rm -f conftest.$ac_objext libconftest.a
- AC_TRY_EVAL([lt_ar_try])
- if test "$ac_status" -ne 0; then
- lt_cv_ar_at_file=@
- fi
- fi
- rm -f conftest.* libconftest.a
- ])
- ])
-
-if test "x$lt_cv_ar_at_file" = xno; then
- archiver_list_spec=
-else
- archiver_list_spec=$lt_cv_ar_at_file
-fi
-_LT_DECL([], [archiver_list_spec], [1],
- [How to feed a file listing to the archiver])
-])# _LT_PROG_AR
-
-
-# _LT_CMD_OLD_ARCHIVE
-# -------------------
-m4_defun([_LT_CMD_OLD_ARCHIVE],
-[_LT_PROG_AR
-
-AC_CHECK_TOOL(STRIP, strip, :)
-test -z "$STRIP" && STRIP=:
-_LT_DECL([], [STRIP], [1], [A symbol stripping program])
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-test -z "$RANLIB" && RANLIB=:
-_LT_DECL([], [RANLIB], [1],
- [Commands used to install an old-style archive])
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
- case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
- ;;
- *)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
- ;;
- esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
-fi
-
-case $host_os in
- darwin*)
- lock_old_archive_extraction=yes ;;
- *)
- lock_old_archive_extraction=no ;;
-esac
-_LT_DECL([], [old_postinstall_cmds], [2])
-_LT_DECL([], [old_postuninstall_cmds], [2])
-_LT_TAGDECL([], [old_archive_cmds], [2],
- [Commands used to build an old-style archive])
-_LT_DECL([], [lock_old_archive_extraction], [0],
- [Whether to use a lock for old archive extraction])
-])# _LT_CMD_OLD_ARCHIVE
-
-
-# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([_LT_COMPILER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
- [$2=no
- m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$3"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- $2=yes
- fi
- fi
- $RM conftest*
-])
-
-if test x"[$]$2" = xyes; then
- m4_if([$5], , :, [$5])
-else
- m4_if([$6], , :, [$6])
-fi
-])# _LT_COMPILER_OPTION
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
-
-
-# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------
-# Check whether the given linker option works
-AC_DEFUN([_LT_LINKER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
- [$2=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $3"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&AS_MESSAGE_LOG_FD
- $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- $2=yes
- fi
- else
- $2=yes
- fi
- fi
- $RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
- m4_if([$4], , :, [$4])
-else
- m4_if([$5], , :, [$5])
-fi
-])# _LT_LINKER_OPTION
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
-
-
-# LT_CMD_MAX_LEN
-#---------------
-AC_DEFUN([LT_CMD_MAX_LEN],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
- i=0
- teststring="ABCD"
-
- case $build_os in
- msdosdjgpp*)
- # On DJGPP, this test can blow up pretty badly due to problems in libc
- # (any single argument exceeding 2000 bytes causes a buffer overrun
- # during glob expansion). Even if it were fixed, the result of this
- # check would be larger than it should be.
- lt_cv_sys_max_cmd_len=12288; # 12K is about right
- ;;
-
- gnu*)
- # Under GNU Hurd, this test is not required because there is
- # no limit to the length of command line arguments.
- # Libtool will interpret -1 as no limit whatsoever
- lt_cv_sys_max_cmd_len=-1;
- ;;
-
- cygwin* | mingw* | cegcc*)
- # On Win9x/ME, this test blows up -- it succeeds, but takes
- # about 5 minutes as the teststring grows exponentially.
- # Worse, since 9x/ME are not pre-emptively multitasking,
- # you end up with a "frozen" computer, even though with patience
- # the test eventually succeeds (with a max line length of 256k).
- # Instead, let's just punt: use the minimum linelength reported by
- # all of the supported platforms: 8192 (on NT/2K/XP).
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- mint*)
- # On MiNT this can take a long time and run out of memory.
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- amigaos*)
- # On AmigaOS with pdksh, this test takes hours, literally.
- # So we just punt and use a minimum line length of 8192.
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
- # This has been around since 386BSD, at least. Likely further.
- if test -x /sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
- elif test -x /usr/sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
- else
- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
- fi
- # And add a safety zone
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- ;;
-
- interix*)
- # We know the value 262144 and hardcode it with a safety zone (like BSD)
- lt_cv_sys_max_cmd_len=196608
- ;;
-
- os2*)
- # The test takes a long time on OS/2.
- lt_cv_sys_max_cmd_len=8192
- ;;
-
- osf*)
- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
- # nice to cause kernel panics so lets avoid the loop below.
- # First set a reasonable default.
- lt_cv_sys_max_cmd_len=16384
- #
- if test -x /sbin/sysconfig; then
- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
- *1*) lt_cv_sys_max_cmd_len=-1 ;;
- esac
- fi
- ;;
- sco3.2v5*)
- lt_cv_sys_max_cmd_len=102400
- ;;
- sysv5* | sco5v6* | sysv4.2uw2*)
- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
- if test -n "$kargmax"; then
- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
- else
- lt_cv_sys_max_cmd_len=32768
- fi
- ;;
- *)
- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- else
- # Make teststring a little bigger before we do anything with it.
- # a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
- teststring=$teststring$teststring
- done
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- # If test is not a shell built-in, we'll probably end up computing a
- # maximum length that is only half of the actual maximum length, but
- # we can't tell.
- while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
- = "X$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- # Only check the string length outside the loop.
- lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
- teststring=
- # Add a significant safety factor because C++ compilers can tack on
- # massive amounts of additional arguments before passing them to the
- # linker. It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
- fi
- ;;
- esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
- AC_MSG_RESULT(none)
-fi
-max_cmd_len=$lt_cv_sys_max_cmd_len
-_LT_DECL([], [max_cmd_len], [0],
- [What is the maximum length of a command?])
-])# LT_CMD_MAX_LEN
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
-
-
-# _LT_HEADER_DLFCN
-# ----------------
-m4_defun([_LT_HEADER_DLFCN],
-[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
-])# _LT_HEADER_DLFCN
-
-
-# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ----------------------------------------------------------------
-m4_defun([_LT_TRY_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
- [$4]
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<_LT_EOF
-[#line $LINENO "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-/* When -fvisbility=hidden is used, assume the code has been annotated
- correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
-int fnord () __attribute__((visibility("default")));
-#endif
-
-int fnord () { return 42; }
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else
- {
- if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- else puts (dlerror ());
- }
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
-
- return status;
-}]
-_LT_EOF
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) $1 ;;
- x$lt_dlneed_uscore) $2 ;;
- x$lt_dlunknown|x*) $3 ;;
- esac
- else :
- # compilation failed
- $3
- fi
-fi
-rm -fr conftest*
-])# _LT_TRY_DLOPEN_SELF
-
-
-# LT_SYS_DLOPEN_SELF
-# ------------------
-AC_DEFUN([LT_SYS_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
- enable_dlopen=unknown
- enable_dlopen_self=unknown
- enable_dlopen_self_static=unknown
-else
- lt_cv_dlopen=no
- lt_cv_dlopen_libs=
-
- case $host_os in
- beos*)
- lt_cv_dlopen="load_add_on"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ;;
-
- mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
- lt_cv_dlopen_libs=
- ;;
-
- cygwin*)
- lt_cv_dlopen="dlopen"
- lt_cv_dlopen_libs=
- ;;
-
- darwin*)
- # if libdl is installed we need to link against it
- AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
- lt_cv_dlopen="dyld"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ])
- ;;
-
- *)
- AC_CHECK_FUNC([shl_load],
- [lt_cv_dlopen="shl_load"],
- [AC_CHECK_LIB([dld], [shl_load],
- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
- [AC_CHECK_FUNC([dlopen],
- [lt_cv_dlopen="dlopen"],
- [AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
- [AC_CHECK_LIB([svld], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
- [AC_CHECK_LIB([dld], [dld_link],
- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
- ])
- ])
- ])
- ])
- ])
- ;;
- esac
-
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
- enable_dlopen=no
- fi
-
- case $lt_cv_dlopen in
- dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
- save_LDFLAGS="$LDFLAGS"
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
- save_LIBS="$LIBS"
- LIBS="$lt_cv_dlopen_libs $LIBS"
-
- AC_CACHE_CHECK([whether a program can dlopen itself],
- lt_cv_dlopen_self, [dnl
- _LT_TRY_DLOPEN_SELF(
- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
- ])
-
- if test "x$lt_cv_dlopen_self" = xyes; then
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
- lt_cv_dlopen_self_static, [dnl
- _LT_TRY_DLOPEN_SELF(
- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
- ])
- fi
-
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
- ;;
- esac
-
- case $lt_cv_dlopen_self in
- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
- *) enable_dlopen_self=unknown ;;
- esac
-
- case $lt_cv_dlopen_self_static in
- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
- *) enable_dlopen_self_static=unknown ;;
- esac
-fi
-_LT_DECL([dlopen_support], [enable_dlopen], [0],
- [Whether dlopen is supported])
-_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
- [Whether dlopen of programs is supported])
-_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
- [Whether dlopen of statically linked programs is supported])
-])# LT_SYS_DLOPEN_SELF
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
-
-
-# _LT_COMPILER_C_O([TAGNAME])
-# ---------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler.
-# This macro does not hard code the compiler like AC_PROG_CC_C_O.
-m4_defun([_LT_COMPILER_C_O],
-[m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
- [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
- [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
- $RM -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
- fi
- fi
- chmod u+w . 2>&AS_MESSAGE_LOG_FD
- $RM conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
- $RM out/* && rmdir out
- cd ..
- $RM -r conftest
- $RM conftest*
-])
-_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
- [Does compiler simultaneously support -c and -o options?])
-])# _LT_COMPILER_C_O
-
-
-# _LT_COMPILER_FILE_LOCKS([TAGNAME])
-# ----------------------------------
-# Check to see if we can do hard links to lock some files if needed
-m4_defun([_LT_COMPILER_FILE_LOCKS],
-[m4_require([_LT_ENABLE_LOCK])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_COMPILER_C_O([$1])
-
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- AC_MSG_CHECKING([if we can lock with hard links])
- hard_links=yes
- $RM conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- AC_MSG_RESULT([$hard_links])
- if test "$hard_links" = no; then
- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
-])# _LT_COMPILER_FILE_LOCKS
-
-
-# _LT_CHECK_OBJDIR
-# ----------------
-m4_defun([_LT_CHECK_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- lt_cv_objdir=.libs
-else
- # MS-DOS does not allow filenames that begin with a dot.
- lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-_LT_DECL([], [objdir], [0],
- [The name of the directory that contains temporary libtool files])dnl
-m4_pattern_allow([LT_OBJDIR])dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
- [Define to the sub-directory in which libtool stores uninstalled libraries.])
-])# _LT_CHECK_OBJDIR
-
-
-# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
-# --------------------------------------
-# Check hardcoding attributes.
-m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
- test -n "$_LT_TAGVAR(runpath_var, $1)" ||
- test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-
- # We can hardcode non-existent directories.
- if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
- test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
- # Linking always hardcodes the temporary library directory.
- _LT_TAGVAR(hardcode_action, $1)=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- _LT_TAGVAR(hardcode_action, $1)=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- _LT_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
- test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-_LT_TAGDECL([], [hardcode_action], [0],
- [How to hardcode a shared library path into an executable])
-])# _LT_LINKER_HARDCODE_LIBPATH
-
-
-# _LT_CMD_STRIPLIB
-# ----------------
-m4_defun([_LT_CMD_STRIPLIB],
-[m4_require([_LT_DECL_EGREP])
-striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
- case $host_os in
- darwin*)
- if test -n "$STRIP" ; then
- striplib="$STRIP -x"
- old_striplib="$STRIP -S"
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
- fi
- ;;
- *)
- AC_MSG_RESULT([no])
- ;;
- esac
-fi
-_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
-_LT_DECL([], [striplib], [1])
-])# _LT_CMD_STRIPLIB
-
-
-# _LT_SYS_DYNAMIC_LINKER([TAG])
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-m4_defun([_LT_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_OBJDUMP])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
-AC_MSG_CHECKING([dynamic linker characteristics])
-m4_if([$1],
- [], [
-if test "$GCC" = yes; then
- case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
- esac
- case $host_os in
- mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
- *) lt_sed_strip_eq="s,=/,/,g" ;;
- esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
- case $lt_search_path_spec in
- *\;*)
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
- ;;
- *)
- lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
- ;;
- esac
- # Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
- lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
- for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
- test -d "$lt_sys_path" && \
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
- fi
- done
- lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
- for (lt_i = NF; lt_i > 0; lt_i--) {
- if ($lt_i != "" && $lt_i != ".") {
- if ($lt_i == "..") {
- lt_count++;
- } else {
- if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
- } else {
- lt_count--;
- }
- }
- }
- }
- if (lt_foo != "") { lt_freq[[lt_foo]]++; }
- if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
-}'`
- # AWK program above erroneously prepends '/' to C:/dos/paths
- # for these hosts.
- case $host_os in
- mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
- $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
- esac
- sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix[[4-9]]*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[[01]] | aix4.[[01]].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- case $host_cpu in
- powerpc)
- # Since July 2007 AmigaOS4 officially supports .so libraries.
- # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- ;;
- m68k)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
- esac
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[[45]]*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32* | cegcc*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$cc_basename in
- yes,*)
- # gcc
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname~
- if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
- eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
- fi'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $RM \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-m4_if([$1], [],[
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
- ;;
- mingw* | cegcc*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- ;;
-
- *,cl*)
- # Native MSVC
- libname_spec='$name'
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- library_names_spec='${libname}.dll.lib'
-
- case $build_os in
- mingw*)
- sys_lib_search_path_spec=
- lt_save_ifs=$IFS
- IFS=';'
- for lt_path in $LIB
- do
- IFS=$lt_save_ifs
- # Let DOS variable expansion print the short 8.3 style file name.
- lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
- sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
- done
- IFS=$lt_save_ifs
- # Convert to MSYS style.
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
- ;;
- cygwin*)
- # Convert to unix form, then to dos form, then back to unix form
- # but this time dos style (no spaces!) so that the unix form looks
- # like /cygdrive/c/PROGRA~1:/cygdr...
- sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
- sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
- sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- ;;
- *)
- sys_lib_search_path_spec="$LIB"
- if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
- # It is most probably a Windows format PATH.
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- # FIXME: find the short name or the path components, as spaces are
- # common. (e.g. "Program Files" -> "PROGRA~1")
- ;;
- esac
-
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $RM \$dlpath'
- shlibpath_overrides_runpath=yes
- dynamic_linker='Win32 link.exe'
- ;;
-
- *)
- # Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
- dynamic_linker='Win32 ld.exe'
- ;;
- esac
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-m4_if([$1], [],[
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[[23]].*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2.*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[[01]]* | freebsdelf3.[[01]]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
- freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-haiku*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- dynamic_linker="$host_os runtime_loader"
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
- postinstall_cmds='chmod 555 $lib'
- # or fails outright, so override atomically:
- install_override_mode=555
- ;;
-
-interix[[3-9]]*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux # correct to gnu/linux during the next big refactor
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
-
- # Some binutils ld are patched to set DT_RUNPATH
- AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
- [lt_cv_shlibpath_overrides_runpath=no
- save_LDFLAGS=$LDFLAGS
- save_libdir=$libdir
- eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
- LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
- AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
- [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
- [lt_cv_shlibpath_overrides_runpath=yes])])
- LDFLAGS=$save_LDFLAGS
- libdir=$save_libdir
- ])
- shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
-
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Add ABI-specific directories to the system library path.
- sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
-
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-*nto* | *qnx*)
- version_type=qnx
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- dynamic_linker='ldqnx.so'
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[[89]] | openbsd2.[[89]].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-rdos*)
- dynamic_linker=no
- ;;
-
-solaris*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-tpf*)
- # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-uts4*)
- version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-fi
-
-_LT_DECL([], [variables_saved_for_relink], [1],
- [Variables whose values should be saved in libtool wrapper scripts and
- restored at link time])
-_LT_DECL([], [need_lib_prefix], [0],
- [Do we need the "lib" prefix for modules?])
-_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
-_LT_DECL([], [version_type], [0], [Library versioning type])
-_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
-_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
-_LT_DECL([], [shlibpath_overrides_runpath], [0],
- [Is shlibpath searched before the hard-coded library search path?])
-_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
-_LT_DECL([], [library_names_spec], [1],
- [[List of archive names. First name is the real one, the rest are links.
- The last name is the one that the linker finds with -lNAME]])
-_LT_DECL([], [soname_spec], [1],
- [[The coded name of the library, if different from the real name]])
-_LT_DECL([], [install_override_mode], [1],
- [Permission mode override for installation of shared libraries])
-_LT_DECL([], [postinstall_cmds], [2],
- [Command to use after installation of a shared archive])
-_LT_DECL([], [postuninstall_cmds], [2],
- [Command to use after uninstallation of a shared archive])
-_LT_DECL([], [finish_cmds], [2],
- [Commands used to finish a libtool library installation in a directory])
-_LT_DECL([], [finish_eval], [1],
- [[As "finish_cmds", except a single script fragment to be evaled but
- not shown]])
-_LT_DECL([], [hardcode_into_libs], [0],
- [Whether we should hardcode library paths into libraries])
-_LT_DECL([], [sys_lib_search_path_spec], [2],
- [Compile-time system search path for libraries])
-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
- [Run-time system search path for libraries])
-])# _LT_SYS_DYNAMIC_LINKER
-
-
-# _LT_PATH_TOOL_PREFIX(TOOL)
-# --------------------------
-# find a file program which can recognize shared library
-AC_DEFUN([_LT_PATH_TOOL_PREFIX],
-[m4_require([_LT_DECL_EGREP])dnl
-AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] | ?:[\\/]*])
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word. This closes a longstanding sh security hole.
- ac_dummy="m4_if([$2], , $PATH, [$2])"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** [email protected]
-
-_LT_EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- AC_MSG_RESULT($MAGIC_CMD)
-else
- AC_MSG_RESULT(no)
-fi
-_LT_DECL([], [MAGIC_CMD], [0],
- [Used to examine libraries when file_magic_cmd begins with "file"])dnl
-])# _LT_PATH_TOOL_PREFIX
-
-# Old name:
-AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
-
-
-# _LT_PATH_MAGIC
-# --------------
-# find a file program which can recognize a shared library
-m4_defun([_LT_PATH_MAGIC],
-[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
- else
- MAGIC_CMD=:
- fi
-fi
-])# _LT_PATH_MAGIC
-
-
-# LT_PATH_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([LT_PATH_LD],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
-
-AC_ARG_WITH([gnu-ld],
- [AS_HELP_STRING([--with-gnu-ld],
- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
- [test "$withval" = no || with_gnu_ld=yes],
- [with_gnu_ld=no])dnl
-
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by $CC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]]* | ?:[[\\/]]*)
- re_direlt='/[[^/]][[^/]]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
- while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-_LT_PATH_LD_GNU
-AC_SUBST([LD])
-
-_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
-])# LT_PATH_LD
-
-# Old names:
-AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
-AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_PROG_LD], [])
-dnl AC_DEFUN([AC_PROG_LD], [])
-
-
-# _LT_PATH_LD_GNU
-#- --------------
-m4_defun([_LT_PATH_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# _LT_PATH_LD_GNU
-
-
-# _LT_CMD_RELOAD
-# --------------
-# find reload flag for linker
-# -- PORTME Some linkers may need a different reload flag.
-m4_defun([_LT_CMD_RELOAD],
-[AC_CACHE_CHECK([for $LD option to reload object files],
- lt_cv_ld_reload_flag,
- [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
- cygwin* | mingw* | pw32* | cegcc*)
- if test "$GCC" != yes; then
- reload_cmds=false
- fi
- ;;
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
- else
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- fi
- ;;
-esac
-_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
-_LT_TAGDECL([], [reload_cmds], [2])dnl
-])# _LT_CMD_RELOAD
-
-
-# _LT_CHECK_MAGIC_METHOD
-# ----------------------
-# how to check for library dependencies
-# -- PORTME fill in with the dynamic library characteristics
-m4_defun([_LT_CHECK_MAGIC_METHOD],
-[m4_require([_LT_DECL_EGREP])
-m4_require([_LT_DECL_OBJDUMP])
-AC_CACHE_CHECK([how to recognize dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix[[4-9]]*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi[[45]]*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin*)
- # func_win32_libid is a shell function defined in ltmain.sh
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- ;;
-
-mingw* | pw32*)
- # Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump',
- # unless we find 'file', for example because we are cross-compiling.
- # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
- if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- else
- # Keep this pattern in sync with the one in func_win32_libid.
- lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- fi
- ;;
-
-cegcc*)
- # use the weaker test based on 'objdump'. See mingw*.
- lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- ;;
-
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-freebsd* | dragonfly*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-haiku*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20* | hpux11*)
- lt_cv_file_magic_cmd=/usr/bin/file
- case $host_cpu in
- ia64*)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- hppa*64*)
- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
- ;;
- *)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- esac
- ;;
-
-interix[[3-9]]*)
- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
- fi
- ;;
-
-newos6*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-*nto* | *qnx*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
- fi
- ;;
-
-osf3* | osf4* | osf5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-rdos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv4 | sysv4.3*)
- case $host_vendor in
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- sequent)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
- ;;
- sni)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
- siemens)
- lt_cv_deplibs_check_method=pass_all
- ;;
- pc)
- lt_cv_deplibs_check_method=pass_all
- ;;
- esac
- ;;
-
-tpf*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-esac
-])
-
-file_magic_glob=
-want_nocaseglob=no
-if test "$build" = "$host"; then
- case $host_os in
- mingw* | pw32*)
- if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
- want_nocaseglob=yes
- else
- file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
- fi
- ;;
- esac
-fi
-
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-_LT_DECL([], [deplibs_check_method], [1],
- [Method to check whether dependent libraries are shared objects])
-_LT_DECL([], [file_magic_cmd], [1],
- [Command to use when deplibs_check_method = "file_magic"])
-_LT_DECL([], [file_magic_glob], [1],
- [How to find potential files when deplibs_check_method = "file_magic"])
-_LT_DECL([], [want_nocaseglob], [1],
- [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
-])# _LT_CHECK_MAGIC_METHOD
-
-
-# LT_PATH_NM
-# ----------
-# find the pathname to a BSD- or MS-compatible name lister
-AC_DEFUN([LT_PATH_NM],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
- lt_nm_to_check="$lt_nm_to_check nm"
- fi
- for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
- lt_cv_path_NM="$tmp_nm -B"
- break
- ;;
- *)
- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
- */dev/null*)
- lt_cv_path_NM="$tmp_nm -p"
- break
- ;;
- *)
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- ;;
- esac
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
- done
- : ${lt_cv_path_NM=no}
-fi])
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
-else
- # Didn't find any BSD compatible name lister, look for dumpbin.
- if test -n "$DUMPBIN"; then :
- # Let the user override the test.
- else
- AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
- case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
- *COFF*)
- DUMPBIN="$DUMPBIN -symbols"
- ;;
- *)
- DUMPBIN=:
- ;;
- esac
- fi
- AC_SUBST([DUMPBIN])
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
- fi
-fi
-test -z "$NM" && NM=nm
-AC_SUBST([NM])
-_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
-
-AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
- [lt_cv_nm_interface="BSD nm"
- echo "int some_variable = 0;" > conftest.$ac_ext
- (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$ac_compile" 2>conftest.err)
- cat conftest.err >&AS_MESSAGE_LOG_FD
- (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
- (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
- cat conftest.err >&AS_MESSAGE_LOG_FD
- (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
- cat conftest.out >&AS_MESSAGE_LOG_FD
- if $GREP 'External.*some_variable' conftest.out > /dev/null; then
- lt_cv_nm_interface="MS dumpbin"
- fi
- rm -f conftest*])
-])# LT_PATH_NM
-
-# Old names:
-AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
-AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_PROG_NM], [])
-dnl AC_DEFUN([AC_PROG_NM], [])
-
-# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
-# --------------------------------
-# how to determine the name of the shared library
-# associated with a specific link library.
-# -- PORTME fill in with the dynamic library characteristics
-m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
-[m4_require([_LT_DECL_EGREP])
-m4_require([_LT_DECL_OBJDUMP])
-m4_require([_LT_DECL_DLLTOOL])
-AC_CACHE_CHECK([how to associate runtime and link libraries],
-lt_cv_sharedlib_from_linklib_cmd,
-[lt_cv_sharedlib_from_linklib_cmd='unknown'
-
-case $host_os in
-cygwin* | mingw* | pw32* | cegcc*)
- # two different shell functions defined in ltmain.sh
- # decide which to use based on capabilities of $DLLTOOL
- case `$DLLTOOL --help 2>&1` in
- *--identify-strict*)
- lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
- ;;
- *)
- lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
- ;;
- esac
- ;;
-*)
- # fallback: assume linklib IS sharedlib
- lt_cv_sharedlib_from_linklib_cmd="$ECHO"
- ;;
-esac
-])
-sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
-test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
-
-_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
- [Command to associate shared and link libraries])
-])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
-
-
-# _LT_PATH_MANIFEST_TOOL
-# ----------------------
-# locate the manifest tool
-m4_defun([_LT_PATH_MANIFEST_TOOL],
-[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
-test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
-AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
- [lt_cv_path_mainfest_tool=no
- echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
- $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
- cat conftest.err >&AS_MESSAGE_LOG_FD
- if $GREP 'Manifest Tool' conftest.out > /dev/null; then
- lt_cv_path_mainfest_tool=yes
- fi
- rm -f conftest*])
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
- MANIFEST_TOOL=:
-fi
-_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
-])# _LT_PATH_MANIFEST_TOOL
-
-
-# LT_LIB_M
-# --------
-# check for math library
-AC_DEFUN([LT_LIB_M],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
- # These system don't have libm, or don't need it
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, cos, LIBM="-lm")
- ;;
-esac
-AC_SUBST([LIBM])
-])# LT_LIB_M
-
-# Old name:
-AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_CHECK_LIBM], [])
-
-
-# _LT_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------
-m4_defun([_LT_COMPILER_NO_RTTI],
-[m4_require([_LT_TAG_COMPILER])dnl
-
-_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
- case $cc_basename in
- nvcc*)
- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
- *)
- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
- esac
-
- _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
- lt_cv_prog_compiler_rtti_exceptions,
- [-fno-rtti -fno-exceptions], [],
- [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
- [Compiler flag to turn off builtin functions])
-])# _LT_COMPILER_NO_RTTI
-
-
-# _LT_CMD_GLOBAL_SYMBOLS
-# ----------------------
-m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[[BCDT]]'
- ;;
-cygwin* | mingw* | pw32* | cegcc*)
- symcode='[[ABCDGISTW]]'
- ;;
-hpux*)
- if test "$host_cpu" = ia64; then
- symcode='[[ABCDEGRST]]'
- fi
- ;;
-irix* | nonstopux*)
- symcode='[[BCDEGRST]]'
- ;;
-osf*)
- symcode='[[BCDEGQRST]]'
- ;;
-solaris*)
- symcode='[[BDRT]]'
- ;;
-sco3.2v5*)
- symcode='[[DT]]'
- ;;
-sysv4.2uw2*)
- symcode='[[DT]]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[[ABDT]]'
- ;;
-sysv4)
- symcode='[[DFNSTU]]'
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Transform an extracted symbol line into a proper C declaration.
-# Some systems (esp. on ia64) link data and code symbols differently,
-# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
- opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
-esac
-
-# Try without a prefix underscore, then with it.
-for ac_symprfx in "" "_"; do
-
- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
- symxfrm="\\1 $ac_symprfx\\2 \\2"
-
- # Write the raw and C identifiers.
- if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
- # Also find C++ and __fastcall symbols from MSVC++,
- # which start with @ or ?.
- lt_cv_sys_global_symbol_pipe="$AWK ['"\
-" {last_section=section; section=\$ 3};"\
-" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
-" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
-" \$ 0!~/External *\|/{next};"\
-" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
-" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
-" ' prfx=^$ac_symprfx]"
- else
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
- fi
- lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
-
- rm -f conftest*
- cat > conftest.$ac_ext <<_LT_EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(void);
-void nm_test_func(void){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-_LT_EOF
-
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
- if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<_LT_EOF > conftest.$ac_ext
-/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
- relocations are performed -- see ld's documentation on pseudo-relocs. */
-# define LT@&t@_DLSYM_CONST
-#elif defined(__osf__)
-/* This system does not cope well with relocations in const data. */
-# define LT@&t@_DLSYM_CONST
-#else
-# define LT@&t@_DLSYM_CONST const
-#endif
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-_LT_EOF
- # Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
-
- cat <<_LT_EOF >> conftest.$ac_ext
-
-/* The mapping between symbol names and symbols. */
-LT@&t@_DLSYM_CONST struct {
- const char *name;
- void *address;
-}
-lt__PROGRAM__LTX_preloaded_symbols[[]] =
-{
- { "@PROGRAM@", (void *) 0 },
-_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
- cat <<\_LT_EOF >> conftest.$ac_ext
- {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
- return lt__PROGRAM__LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-_LT_EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- lt_globsym_save_LIBS=$LIBS
- lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
- LIBS=$lt_globsym_save_LIBS
- CFLAGS=$lt_globsym_save_CFLAGS
- else
- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
- cat conftest.$ac_ext >&5
- fi
- rm -rf conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- lt_cv_sys_global_symbol_pipe=
- fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
- AC_MSG_RESULT(failed)
-else
- AC_MSG_RESULT(ok)
-fi
-
-# Response file support.
-if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- nm_file_list_spec='@'
-elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
- nm_file_list_spec='@'
-fi
-
-_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
- [Take the output of nm and produce a listing of raw symbols and C names])
-_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
- [Transform the output of nm in a proper C declaration])
-_LT_DECL([global_symbol_to_c_name_address],
- [lt_cv_sys_global_symbol_to_c_name_address], [1],
- [Transform the output of nm in a C name address pair])
-_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
- [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
- [Transform the output of nm in a C name address pair when lib prefix is needed])
-_LT_DECL([], [nm_file_list_spec], [1],
- [Specify filename containing input files for $NM])
-]) # _LT_CMD_GLOBAL_SYMBOLS
-
-
-# _LT_COMPILER_PIC([TAGNAME])
-# ---------------------------
-m4_defun([_LT_COMPILER_PIC],
-[m4_require([_LT_TAG_COMPILER])dnl
-_LT_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_TAGVAR(lt_prog_compiler_static, $1)=
-
-m4_if([$1], [CXX], [
- # C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
-
- amigaos*)
- case $host_cpu in
- powerpc)
- # see comment about AmigaOS4 .so support
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- m68k)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
- ;;
- esac
- ;;
-
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
- mingw* | cygwin* | os2* | pw32* | cegcc*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- m4_if([$1], [GCJ], [],
- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
- ;;
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
- ;;
- *djgpp*)
- # DJGPP does not support shared libraries at all
- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
- ;;
- haiku*)
- # PIC is the default for Haiku.
- # The "-static" flag exists, but is broken.
- _LT_TAGVAR(lt_prog_compiler_static, $1)=
- ;;
- interix[[3-9]]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
- fi
- ;;
- hpux*)
- # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
- # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
- # sets the default TLS model and affects inlining.
- case $host_cpu in
- hppa*64*)
- ;;
- *)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- ;;
- *qnx* | *nto*)
- # QNX uses GNU C++, but need to define -shared option too, otherwise
- # it will coredump.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
- ;;
- *)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- else
- case $host_os in
- aix[[4-9]]*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- else
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- chorus*)
- case $cc_basename in
- cxch68*)
- # Green Hills C++ Compiler
- # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
- ;;
- esac
- ;;
- mingw* | cygwin* | os2* | pw32* | cegcc*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- m4_if([$1], [GCJ], [],
- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
- ;;
- dgux*)
- case $cc_basename in
- ec++*)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- ;;
- *)
- ;;
- esac
- ;;
- freebsd* | dragonfly*)
- # FreeBSD uses GNU C++
- ;;
- hpux9* | hpux10* | hpux11*)
- case $cc_basename in
- CC*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- if test "$host_cpu" != ia64; then
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
- fi
- ;;
- aCC*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
- ;;
- esac
- ;;
- *)
- ;;
- esac
- ;;
- interix*)
- # This is c89, which is MS Visual C++ (no shared libs)
- # Anyone wants to do a port?
- ;;
- irix5* | irix6* | nonstopux*)
- case $cc_basename in
- CC*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- # CC pic flag -KPIC is the default.
- ;;
- *)
- ;;
- esac
- ;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
- case $cc_basename in
- KCC*)
- # KAI C++ Compiler
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- ecpc* )
- # old Intel C++ for x86_64 which still supported -KPIC.
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- icpc* )
- # Intel C++, used to be incompatible with GCC.
- # ICC 10 doesn't accept -KPIC any more.
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- pgCC* | pgcpp*)
- # Portland Group C++ compiler
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- cxx*)
- # Compaq C++
- # Make sure the PIC flag is empty. It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
- # IBM XL 8.0, 9.0 on PPC and BlueGene
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- ;;
- esac
- ;;
- esac
- ;;
- lynxos*)
- ;;
- m88k*)
- ;;
- mvs*)
- case $cc_basename in
- cxx*)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
- ;;
- *)
- ;;
- esac
- ;;
- netbsd*)
- ;;
- *qnx* | *nto*)
- # QNX uses GNU C++, but need to define -shared option too, otherwise
- # it will coredump.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
- ;;
- osf3* | osf4* | osf5*)
- case $cc_basename in
- KCC*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
- ;;
- RCC*)
- # Rational C++ 2.4.1
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- ;;
- cxx*)
- # Digital/Compaq C++
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # Make sure the PIC flag is empty. It appears that all Alpha
- # Linux and Compaq Tru64 Unix objects are PIC.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- *)
- ;;
- esac
- ;;
- psos*)
- ;;
- solaris*)
- case $cc_basename in
- CC* | sunCC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- ;;
- gcx*)
- # Green Hills C++ Compiler
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
- ;;
- *)
- ;;
- esac
- ;;
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- lcc*)
- # Lucid
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- ;;
- *)
- ;;
- esac
- ;;
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- case $cc_basename in
- CC*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- esac
- ;;
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- ;;
- *)
- ;;
- esac
- ;;
- vxworks*)
- ;;
- *)
- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
- esac
- fi
-],
-[
- if test "$GCC" = yes; then
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
-
- amigaos*)
- case $host_cpu in
- powerpc)
- # see comment about AmigaOS4 .so support
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- m68k)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
- ;;
- esac
- ;;
-
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | cygwin* | pw32* | os2* | cegcc*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- m4_if([$1], [GCJ], [],
- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
- ;;
-
- haiku*)
- # PIC is the default for Haiku.
- # The "-static" flag exists, but is broken.
- _LT_TAGVAR(lt_prog_compiler_static, $1)=
- ;;
-
- hpux*)
- # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
- # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
- # sets the default TLS model and affects inlining.
- case $host_cpu in
- hppa*64*)
- # +Z the default
- ;;
- *)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- ;;
-
- interix[[3-9]]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- enable_shared=no
- ;;
-
- *nto* | *qnx*)
- # QNX uses GNU C++, but need to define -shared option too, otherwise
- # it will coredump.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
- fi
- ;;
-
- *)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
-
- case $cc_basename in
- nvcc*) # Cuda Compiler Driver 2.2
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
- if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
- _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
- fi
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- else
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
-
- mingw* | cygwin* | pw32* | os2* | cegcc*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- m4_if([$1], [GCJ], [],
- [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
- ;;
-
- hpux9* | hpux10* | hpux11*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # PIC (with -KPIC) is the default.
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
- case $cc_basename in
- # old Intel for x86_64 which still supported -KPIC.
- ecc*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- # icc used to be incompatible with GCC.
- # ICC 10 doesn't accept -KPIC any more.
- icc* | ifort*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- # Lahey Fortran 8.1.
- lf95*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
- ;;
- nagfor*)
- # NAG Fortran compiler
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- ccc*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # All Alpha code is PIC.
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- xl* | bgxl* | bgf* | mpixl*)
- # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
- ;;
- *Sun\ F* | *Sun*Fortran*)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- ;;
- *Sun\ C*)
- # Sun C 5.9
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- *Intel*\ [[CF]]*Compiler*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- *Portland\ Group*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- esac
- ;;
- esac
- ;;
-
- newsos6)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- *nto* | *qnx*)
- # QNX uses GNU C++, but need to define -shared option too, otherwise
- # it will coredump.
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
- ;;
-
- osf3* | osf4* | osf5*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # All OSF/1 code is PIC.
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- rdos*)
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- solaris*)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
- *)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
- esac
- ;;
-
- sunos4*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- unicos*)
- _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
-
- uts4*)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- *)
- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
- esac
- fi
-])
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)=
- ;;
- *)
- _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
- ;;
-esac
-
-AC_CACHE_CHECK([for $compiler option to produce PIC],
- [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
- [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
-_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
- _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
- [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
- [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
- [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
- "" | " "*) ;;
- *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
- esac],
- [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
- [Additional compiler flags for building library objects])
-
-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
- [How to pass a linker flag through the compiler])
-#
-# Check to make sure the static flag actually works.
-#
-wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
-_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
- _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
- $lt_tmp_static_flag,
- [],
- [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
-_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
- [Compiler flag to prevent dynamic linking])
-])# _LT_COMPILER_PIC
-
-
-# _LT_LINKER_SHLIBS([TAGNAME])
-# ----------------------------
-# See if the linker supports building shared libraries.
-m4_defun([_LT_LINKER_SHLIBS],
-[AC_REQUIRE([LT_PATH_LD])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-m4_require([_LT_PATH_MANIFEST_TOOL])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-m4_if([$1], [CXX], [
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
- case $host_os in
- aix[[4-9]]*)
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global defined
- # symbols, whereas GNU nm marks them as "W".
- if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
- else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
- fi
- ;;
- pw32*)
- _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
- ;;
- cygwin* | mingw* | cegcc*)
- case $cc_basename in
- cl*)
- _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
- ;;
- *)
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
- _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
- ;;
- esac
- ;;
- *)
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- ;;
- esac
-], [
- runpath_var=
- _LT_TAGVAR(allow_undefined_flag, $1)=
- _LT_TAGVAR(always_export_symbols, $1)=no
- _LT_TAGVAR(archive_cmds, $1)=
- _LT_TAGVAR(archive_expsym_cmds, $1)=
- _LT_TAGVAR(compiler_needs_object, $1)=no
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
- _LT_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- _LT_TAGVAR(hardcode_automatic, $1)=no
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_direct_absolute, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_TAGVAR(hardcode_libdir_separator, $1)=
- _LT_TAGVAR(hardcode_minus_L, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_TAGVAR(inherit_rpath, $1)=no
- _LT_TAGVAR(link_all_deplibs, $1)=unknown
- _LT_TAGVAR(module_cmds, $1)=
- _LT_TAGVAR(module_expsym_cmds, $1)=
- _LT_TAGVAR(old_archive_from_new_cmds, $1)=
- _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
- _LT_TAGVAR(thread_safe_flag_spec, $1)=
- _LT_TAGVAR(whole_archive_flag_spec, $1)=
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- _LT_TAGVAR(include_expsyms, $1)=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- # Exclude shared library initialization/finalization symbols.
-dnl Note also adjust exclude_expsyms for C++ above.
- extract_expsyms_cmds=
-
- case $host_os in
- cygwin* | mingw* | pw32* | cegcc*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
-
- _LT_TAGVAR(ld_shlibs, $1)=yes
-
- # On some targets, GNU ld is compatible enough with the native linker
- # that we're better off using the native interface for both.
- lt_use_gnu_ld_interface=no
- if test "$with_gnu_ld" = yes; then
- case $host_os in
- aix*)
- # The AIX port of GNU ld has always aspired to compatibility
- # with the native linker. However, as the warning in the GNU ld
- # block says, versions before 2.19.5* couldn't really create working
- # shared libraries, regardless of the interface used.
- case `$LD -v 2>&1` in
- *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
- *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
- *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
- *)
- lt_use_gnu_ld_interface=yes
- ;;
- esac
- ;;
- *)
- lt_use_gnu_ld_interface=yes
- ;;
- esac
- fi
-
- if test "$lt_use_gnu_ld_interface" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>&1` in
- *GNU\ gold*) supports_anon_versioning=yes ;;
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix[[3-9]]*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- _LT_TAGVAR(ld_shlibs, $1)=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.19, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to install binutils
-*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
-*** You will then need to restart the configuration process.
-
-_LT_EOF
- fi
- ;;
-
- amigaos*)
- case $host_cpu in
- powerpc)
- # see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)=''
- ;;
- m68k)
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- ;;
- esac
- ;;
-
- beos*)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Joseph Beckenbach <[email protected]> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- cygwin* | mingw* | pw32* | cegcc*)
- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=no
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
- _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
-
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- haiku*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- interix[[3-9]]*)
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
- tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
- case $cc_basename in
- diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
- esac
- fi
- if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
- then
- tmp_addflag=' $pic_flag'
- tmp_sharedflag='-shared'
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95* | pgfortran*)
- # Portland Group f77 and f90 compilers
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- lf95*) # Lahey Fortran 8.1
- _LT_TAGVAR(whole_archive_flag_spec, $1)=
- tmp_sharedflag='--shared' ;;
- xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
- tmp_sharedflag='-qmkshrobj'
- tmp_addflag= ;;
- nvcc*) # Cuda Compiler Driver 2.2
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- _LT_TAGVAR(compiler_needs_object, $1)=yes
- ;;
- esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- _LT_TAGVAR(compiler_needs_object, $1)=yes
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- esac
- _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test "x$supports_anon_versioning" = xyes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
-
- case $cc_basename in
- xlf* | bgf* | bgxlf* | mpixlf*)
- # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
- _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
- fi
- ;;
- esac
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
- _LT_TAGVAR(ld_shlibs, $1)=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
- _LT_TAGVAR(ld_shlibs, $1)=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- # For security reasons, it is highly recommended that you always
- # use absolute paths for naming shared libraries, and exclude the
- # DT_RUNPATH tag from executables and libraries. But doing so
- # requires that you compile everything twice, which is a pain.
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- *)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
-
- if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
- runpath_var=
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=yes
- _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- _LT_TAGVAR(hardcode_direct, $1)=unsupported
- fi
- ;;
-
- aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global
- # defined symbols, whereas GNU nm marks them as "W".
- if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
- else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- _LT_TAGVAR(archive_cmds, $1)=''
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[[012]]|aix4.[[012]].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" &&
- strings "$collect2name" | $GREP resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- _LT_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- _LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an
- # empty executable.
- _LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
- _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an
- # empty executable.
- _LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
- # We only use this code for GNU lds that support --whole-archive.
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- else
- # Exported symbols can be pulled into shared objects from archives
- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
- fi
- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- case $host_cpu in
- powerpc)
- # see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)=''
- ;;
- m68k)
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- ;;
- esac
- ;;
-
- bsdi[[45]]*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32* | cegcc*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- case $cc_basename in
- cl*)
- # Native MSVC
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='@'
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
- # The linker will not automatically build a static lib if we build a DLL.
- # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
- # Don't use ranlib
- _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
- _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
- ;;
- *)
- # Assume MSVC wrapper
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
- # FIXME: Should let the user specify the lib program.
- _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- ;;
- esac
- ;;
-
- darwin* | rhapsody*)
- _LT_DARWIN_LINKER_FEATURES($1)
- ;;
-
- dgux*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2.*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(hardcode_direct, $1)=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- m4_if($1, [], [
- # Older versions of the 11.00 compiler do not understand -b yet
- # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
- _LT_LINKER_OPTION([if $CC understands -b],
- _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
- [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
- [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
- [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- *)
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- # Try to use the -exported_symbol ld option, if it does not
- # work, assume that -exports_file does not work either and
- # implicitly export all symbols.
- # This should be the same for all languages, so no per-tag cache variable.
- AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
- [lt_cv_irix_exported_symbol],
- [save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
- AC_LINK_IFELSE(
- [AC_LANG_SOURCE(
- [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
- [C++], [[int foo (void) { return 0; }]],
- [Fortran 77], [[
- subroutine foo
- end]],
- [Fortran], [[
- subroutine foo
- end]])])],
- [lt_cv_irix_exported_symbol=yes],
- [lt_cv_irix_exported_symbol=no])
- LDFLAGS="$save_LDFLAGS"])
- if test "$lt_cv_irix_exported_symbol" = yes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
- fi
- else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
- fi
- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(inherit_rpath, $1)=yes
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- newsos6)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- *nto* | *qnx*)
- ;;
-
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- else
- case $host_os in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- os2*)
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- else
- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- fi
- _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
-
- solaris*)
- _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
- else
- case `$CC -V 2>&1` in
- *"Compilers 5.0"*)
- wlarc=''
- _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
- ;;
- *)
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
- ;;
- esac
- fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
- fi
- ;;
- esac
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
- _LT_TAGVAR(hardcode_direct, $1)=no
- ;;
- motorola)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- sysv4.3*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- _LT_TAGVAR(ld_shlibs, $1)=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- *)
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
-
- if test x$host_vendor = xsni; then
- case $host in
- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
- ;;
- esac
- fi
- fi
-])
-AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
-
-_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
-_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
-_LT_DECL([], [extract_expsyms_cmds], [2],
- [The commands to extract the exported symbol list from a shared archive])
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
-x|xyes)
- # Assume -lc should be added
- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $_LT_TAGVAR(archive_cmds, $1) in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- AC_CACHE_CHECK([whether -lc should be explicitly linked in],
- [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
- [$RM conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
- pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
- _LT_TAGVAR(allow_undefined_flag, $1)=
- if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
- then
- lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
- else
- lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- fi
- _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $RM conftest*
- ])
- _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
- ;;
- esac
- fi
- ;;
-esac
-
-_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
- [Whether or not to add -lc for building shared libraries])
-_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
- [enable_shared_with_static_runtimes], [0],
- [Whether or not to disallow shared libs when runtime libs are static])
-_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
- [Compiler flag to allow reflexive dlopens])
-_LT_TAGDECL([], [whole_archive_flag_spec], [1],
- [Compiler flag to generate shared objects directly from archives])
-_LT_TAGDECL([], [compiler_needs_object], [1],
- [Whether the compiler copes with passing no objects directly])
-_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
- [Create an old-style archive from a shared archive])
-_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
- [Create a temporary old-style archive to link instead of a shared archive])
-_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
-_LT_TAGDECL([], [archive_expsym_cmds], [2])
-_LT_TAGDECL([], [module_cmds], [2],
- [Commands used to build a loadable module if different from building
- a shared archive.])
-_LT_TAGDECL([], [module_expsym_cmds], [2])
-_LT_TAGDECL([], [with_gnu_ld], [1],
- [Whether we are building with GNU ld or not])
-_LT_TAGDECL([], [allow_undefined_flag], [1],
- [Flag that allows shared libraries with undefined symbols to be built])
-_LT_TAGDECL([], [no_undefined_flag], [1],
- [Flag that enforces no undefined symbols])
-_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
- [Flag to hardcode $libdir into a binary during linking.
- This must work even if $libdir does not exist])
-_LT_TAGDECL([], [hardcode_libdir_separator], [1],
- [Whether we need a single "-rpath" flag with a separated argument])
-_LT_TAGDECL([], [hardcode_direct], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
- DIR into the resulting binary])
-_LT_TAGDECL([], [hardcode_direct_absolute], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
- DIR into the resulting binary and the resulting library dependency is
- "absolute", i.e impossible to change by setting ${shlibpath_var} if the
- library is relocated])
-_LT_TAGDECL([], [hardcode_minus_L], [0],
- [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
- into the resulting binary])
-_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
- [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
- into the resulting binary])
-_LT_TAGDECL([], [hardcode_automatic], [0],
- [Set to "yes" if building a shared library automatically hardcodes DIR
- into the library and all subsequent libraries and executables linked
- against it])
-_LT_TAGDECL([], [inherit_rpath], [0],
- [Set to yes if linker adds runtime paths of dependent libraries
- to runtime path list])
-_LT_TAGDECL([], [link_all_deplibs], [0],
- [Whether libtool must link a program against all its dependency libraries])
-_LT_TAGDECL([], [always_export_symbols], [0],
- [Set to "yes" if exported symbols are required])
-_LT_TAGDECL([], [export_symbols_cmds], [2],
- [The commands to list exported symbols])
-_LT_TAGDECL([], [exclude_expsyms], [1],
- [Symbols that should not be listed in the preloaded symbols])
-_LT_TAGDECL([], [include_expsyms], [1],
- [Symbols that must always be exported])
-_LT_TAGDECL([], [prelink_cmds], [2],
- [Commands necessary for linking programs (against libraries) with templates])
-_LT_TAGDECL([], [postlink_cmds], [2],
- [Commands necessary for finishing linking programs])
-_LT_TAGDECL([], [file_list_spec], [1],
- [Specify filename containing input files])
-dnl FIXME: Not yet implemented
-dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
-dnl [Compiler flag to generate thread safe objects])
-])# _LT_LINKER_SHLIBS
-
-
-# _LT_LANG_C_CONFIG([TAG])
-# ------------------------
-# Ensure that the configuration variables for a C compiler are suitably
-# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_C_CONFIG],
-[m4_require([_LT_DECL_EGREP])dnl
-lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-_LT_TAG_COMPILER
-# Save the default compiler, since it gets overwritten when the other
-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
-compiler_DEFAULT=$CC
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-if test -n "$compiler"; then
- _LT_COMPILER_NO_RTTI($1)
- _LT_COMPILER_PIC($1)
- _LT_COMPILER_C_O($1)
- _LT_COMPILER_FILE_LOCKS($1)
- _LT_LINKER_SHLIBS($1)
- _LT_SYS_DYNAMIC_LINKER($1)
- _LT_LINKER_HARDCODE_LIBPATH($1)
- LT_SYS_DLOPEN_SELF
- _LT_CMD_STRIPLIB
-
- # Report which library types will actually be built
- AC_MSG_CHECKING([if libtool supports shared libraries])
- AC_MSG_RESULT([$can_build_shared])
-
- AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
-
- # On AIX, shared libraries and static libraries use the same namespace, and
- # are all built from PIC.
- case $host_os in
- aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-
- aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
- esac
- AC_MSG_RESULT([$enable_shared])
-
- AC_MSG_CHECKING([whether to build static libraries])
- # Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
- AC_MSG_RESULT([$enable_static])
-
- _LT_CONFIG($1)
-fi
-AC_LANG_POP
-CC="$lt_save_CC"
-])# _LT_LANG_C_CONFIG
-
-
-# _LT_LANG_CXX_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a C++ compiler are suitably
-# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_CXX_CONFIG],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_PATH_MANIFEST_TOOL])dnl
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
- AC_PROG_CXXCPP
-else
- _lt_caught_CXX_error=yes
-fi
-
-AC_LANG_PUSH(C++)
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(compiler_needs_object, $1)=no
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the CXX compiler isn't working. Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
- # Code to be used in simple compile tests
- lt_simple_compile_test_code="int some_variable = 0;"
-
- # Code to be used in simple link tests
- lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
-
- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
- _LT_TAG_COMPILER
-
- # save warnings/boilerplate of simple test code
- _LT_COMPILER_BOILERPLATE
- _LT_LINKER_BOILERPLATE
-
- # Allow CC to be a program name with arguments.
- lt_save_CC=$CC
- lt_save_CFLAGS=$CFLAGS
- lt_save_LD=$LD
- lt_save_GCC=$GCC
- GCC=$GXX
- lt_save_with_gnu_ld=$with_gnu_ld
- lt_save_path_LD=$lt_cv_path_LD
- if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
- lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
- else
- $as_unset lt_cv_prog_gnu_ld
- fi
- if test -n "${lt_cv_path_LDCXX+set}"; then
- lt_cv_path_LD=$lt_cv_path_LDCXX
- else
- $as_unset lt_cv_path_LD
- fi
- test -z "${LDCXX+set}" || LD=$LDCXX
- CC=${CXX-"c++"}
- CFLAGS=$CXXFLAGS
- compiler=$CC
- _LT_TAGVAR(compiler, $1)=$CC
- _LT_CC_BASENAME([$compiler])
-
- if test -n "$compiler"; then
- # We don't want -fno-exception when compiling C++ code, so set the
- # no_builtin_flag separately
- if test "$GXX" = yes; then
- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
- else
- _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
- fi
-
- if test "$GXX" = yes; then
- # Set up default GNU C++ configuration
-
- LT_PATH_LD
-
- # Check if GNU C++ uses GNU ld as the underlying linker, since the
- # archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
- # If archive_cmds runs LD, not CC, wlarc should be empty
- # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
- # investigate it a little bit more. (MM)
- wlarc='${wl}'
-
- # ancient GNU ld didn't support --whole-archive et. al.
- if eval "`$CC -print-prog-name=ld` --help 2>&1" |
- $GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- with_gnu_ld=no
- wlarc=
-
- # A generic and very simple default shared library creation
- # command for GNU C++ for the case where it uses the native
- # linker, instead of GNU ld. If possible, this setting should
- # overridden to take advantage of the native linker features on
- # the platform it is being used on.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- fi
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
-
- else
- GXX=no
- with_gnu_ld=no
- wlarc=
- fi
-
- # PORTME: fill in a description of your system's C++ link characteristics
- AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
- _LT_TAGVAR(ld_shlibs, $1)=yes
- case $host_os in
- aix3*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
- for ld_flag in $LDFLAGS; do
- case $ld_flag in
- *-brtl*)
- aix_use_runtimelinking=yes
- break
- ;;
- esac
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- _LT_TAGVAR(archive_cmds, $1)=''
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
-
- if test "$GXX" = yes; then
- case $host_os in aix4.[[012]]|aix4.[[012]].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" &&
- strings "$collect2name" | $GREP resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- _LT_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=
- fi
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to
- # export.
- _LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty
- # executable.
- _LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
- _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an
- # empty executable.
- _LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
- # We only use this code for GNU lds that support --whole-archive.
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- else
- # Exported symbols can be pulled into shared objects from archives
- _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
- fi
- _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared
- # libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- beos*)
- if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Joseph Beckenbach <[email protected]> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- chorus*)
- case $cc_basename in
- *)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
-
- cygwin* | mingw* | pw32* | cegcc*)
- case $GXX,$cc_basename in
- ,cl* | no,cl*)
- # Native MSVC
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='@'
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
- # The linker will not automatically build a static lib if we build a DLL.
- # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- # Don't use ranlib
- _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
- _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- func_to_tool_file "$lt_outputfile"~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
- ;;
- *)
- # g++
- # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
- _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(always_export_symbols, $1)=no
- _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
- if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
- darwin* | rhapsody*)
- _LT_DARWIN_LINKER_FEATURES($1)
- ;;
-
- dgux*)
- case $cc_basename in
- ec++*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- ghcx*)
- # Green Hills C++ Compiler
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
-
- freebsd2.*)
- # C++ shared libraries reported to be fairly broken before
- # switch to ELF
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- freebsd-elf*)
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- ;;
-
- freebsd* | dragonfly*)
- # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
- # conventions
- _LT_TAGVAR(ld_shlibs, $1)=yes
- ;;
-
- gnu*)
- ;;
-
- haiku*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- hpux9*)
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC*)
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
- ;;
- *)
- if test "$GXX" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
-
- hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- ;;
- *)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
- esac
- fi
- case $host_cpu in
- hppa*64*|ia64*)
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- *)
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
- # but as the default
- # location of the library.
- ;;
- esac
-
- case $cc_basename in
- CC*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- aCC*)
- case $host_cpu in
- hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
- ;;
- *)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
- case $host_cpu in
- hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- ;;
- esac
- fi
- else
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
-
- interix[[3-9]]*)
- _LT_TAGVAR(hardcode_direct, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
- irix5* | irix6*)
- case $cc_basename in
- CC*)
- # SGI C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
-
- # Archives containing C++ object files must be created using
- # "CC -ar", where "CC" is the IRIX C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
- ;;
- *)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
- fi
- fi
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- ;;
- esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(inherit_rpath, $1)=yes
- ;;
-
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
-
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
- # Archives containing C++ object files must be created using
- # "CC -Bstatic", where "CC" is the KAI C++ compiler.
- _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
- ;;
- icpc* | ecpc* )
- # Intel C++
- with_gnu_ld=yes
- # version 8.0 and above of icpc choke on multiply defined symbols
- # if we add $predep_objects and $postdep_objects, however 7.1 and
- # earlier do not add the objects themselves.
- case `$CC -V 2>&1` in
- *"Version 7."*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- *) # Version 8.0 or newer
- tmp_idyn=
- case $host_cpu in
- ia64*) tmp_idyn=' -i_dynamic';;
- esac
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- ;;
- esac
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
- ;;
- pgCC* | pgcpp*)
- # Portland Group C++ compiler
- case `$CC -V` in
- *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
- _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
- compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
- _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
- $RANLIB $oldlib'
- _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
- ;;
- *) # Version 6 and above use weak symbols
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
- ;;
- esac
-
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- ;;
- cxx*)
- # Compaq C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
- runpath_var=LD_RUN_PATH
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
- ;;
- xl* | mpixl* | bgxl*)
- # IBM XL 8.0 on PPC, with GNU ld
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
- _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
- _LT_TAGVAR(compiler_needs_object, $1)=yes
-
- # Not sure whether something based on
- # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
- # would be better.
- output_verbose_link_cmd='func_echo_all'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
- ;;
- esac
- ;;
- esac
- ;;
-
- lynxos*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- m88k*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- mvs*)
- case $cc_basename in
- cxx*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
- wlarc=
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- fi
- # Workaround some broken pre-1.5 toolchains
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
- ;;
-
- *nto* | *qnx*)
- _LT_TAGVAR(ld_shlibs, $1)=yes
- ;;
-
- openbsd2*)
- # C++ shared libraries are fairly broken
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- _LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- fi
- output_verbose_link_cmd=func_echo_all
- else
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- osf3* | osf4* | osf5*)
- case $cc_basename in
- KCC*)
- # Kuck and Associates, Inc. (KAI) C++ Compiler
-
- # KCC will only create a shared library if the output file
- # ends with ".so" (or ".sl" for HP-UX), so rename the library
- # to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Archives containing C++ object files must be created using
- # the KAI C++ compiler.
- case $host in
- osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
- *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
- esac
- ;;
- RCC*)
- # Rational C++ 2.4.1
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- cxx*)
- case $host in
- osf3*)
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- ;;
- *)
- _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
- $RM $lib.exp'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- ;;
- esac
-
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- #
- # There doesn't appear to be a way to prevent this compiler from
- # explicitly linking system object files so we need to strip them
- # from the output so that they don't get included in the library
- # dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
- ;;
- *)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- case $host in
- osf3*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- ;;
- esac
-
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
-
- else
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
-
- psos*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- sunos4*)
- case $cc_basename in
- CC*)
- # Sun C++ 4.x
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- lcc*)
- # Lucid
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
-
- solaris*)
- case $cc_basename in
- CC* | sunCC*)
- # Sun C++ 4.2, 5.x and Centerline C++
- _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
- _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
- ;;
- esac
- _LT_TAGVAR(link_all_deplibs, $1)=yes
-
- output_verbose_link_cmd='func_echo_all'
-
- # Archives containing C++ object files must be created using
- # "CC -xar", where "CC" is the Sun C++ compiler. This is
- # necessary to make sure instantiated templates are included
- # in the archive.
- _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
- ;;
- gcx*)
- # Green Hills C++ Compiler
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
- # The C++ compiler must be used to create the archive.
- _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
- ;;
- *)
- # GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
- if $CC --version | $GREP -v '^2\.7' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
- else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
- # platform.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
- # Commands to make compiler produce verbose output that lists
- # what "hidden" libraries, object files and flags are used when
- # linking a shared library.
- output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
- fi
-
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- ;;
- esac
- fi
- ;;
- esac
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
- _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- case $cc_basename in
- CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
- '"$_LT_TAGVAR(old_archive_cmds, $1)"
- _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
- '"$_LT_TAGVAR(reload_cmds, $1)"
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- ;;
-
- tandem*)
- case $cc_basename in
- NCC*)
- # NonStop-UX NCC 3.20
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- *)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- ;;
-
- vxworks*)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- *)
- # FIXME: insert proper C++ library support
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
-
- AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
- test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
- _LT_TAGVAR(GCC, $1)="$GXX"
- _LT_TAGVAR(LD, $1)="$LD"
-
- ## CAVEAT EMPTOR:
- ## There is no encapsulation within the following macros, do not change
- ## the running order or otherwise move them around unless you know exactly
- ## what you are doing...
- _LT_SYS_HIDDEN_LIBDEPS($1)
- _LT_COMPILER_PIC($1)
- _LT_COMPILER_C_O($1)
- _LT_COMPILER_FILE_LOCKS($1)
- _LT_LINKER_SHLIBS($1)
- _LT_SYS_DYNAMIC_LINKER($1)
- _LT_LINKER_HARDCODE_LIBPATH($1)
-
- _LT_CONFIG($1)
- fi # test -n "$compiler"
-
- CC=$lt_save_CC
- CFLAGS=$lt_save_CFLAGS
- LDCXX=$LD
- LD=$lt_save_LD
- GCC=$lt_save_GCC
- with_gnu_ld=$lt_save_with_gnu_ld
- lt_cv_path_LDCXX=$lt_cv_path_LD
- lt_cv_path_LD=$lt_save_path_LD
- lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
- lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
-
-AC_LANG_POP
-])# _LT_LANG_CXX_CONFIG
-
-
-# _LT_FUNC_STRIPNAME_CNF
-# ----------------------
-# func_stripname_cnf prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-#
-# This function is identical to the (non-XSI) version of func_stripname,
-# except this one can be used by m4 code that may be executed by configure,
-# rather than the libtool script.
-m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
-AC_REQUIRE([_LT_DECL_SED])
-AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
-func_stripname_cnf ()
-{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
- esac
-} # func_stripname_cnf
-])# _LT_FUNC_STRIPNAME_CNF
-
-# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
-# ---------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
-# Dependencies to place before and after the object being linked:
-_LT_TAGVAR(predep_objects, $1)=
-_LT_TAGVAR(postdep_objects, $1)=
-_LT_TAGVAR(predeps, $1)=
-_LT_TAGVAR(postdeps, $1)=
-_LT_TAGVAR(compiler_lib_search_path, $1)=
-
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library. It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
-int a;
-void foo (void) { a = 0; }
-_LT_EOF
-], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
-class Foo
-{
-public:
- Foo (void) { a = 0; }
-private:
- int a;
-};
-_LT_EOF
-], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
- subroutine foo
- implicit none
- integer*4 a
- a=0
- return
- end
-_LT_EOF
-], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
- subroutine foo
- implicit none
- integer a
- a=0
- return
- end
-_LT_EOF
-], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
-public class foo {
- private int a;
- public void bar (void) {
- a = 0;
- }
-};
-_LT_EOF
-], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
-package foo
-func foo() {
-}
-_LT_EOF
-])
-
-_lt_libdeps_save_CFLAGS=$CFLAGS
-case "$CC $CFLAGS " in #(
-*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
-*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
-*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
-esac
-
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
- # Parse the compiler output and extract the necessary
- # objects, libraries and library flags.
-
- # Sentinel used to keep track of whether or not we are before
- # the conftest object file.
- pre_test_object_deps_done=no
-
- for p in `eval "$output_verbose_link_cmd"`; do
- case ${prev}${p} in
-
- -L* | -R* | -l*)
- # Some compilers place space between "-{L,R}" and the path.
- # Remove the space.
- if test $p = "-L" ||
- test $p = "-R"; then
- prev=$p
- continue
- fi
-
- # Expand the sysroot to ease extracting the directories later.
- if test -z "$prev"; then
- case $p in
- -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
- -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
- -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
- esac
- fi
- case $p in
- =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
- esac
- if test "$pre_test_object_deps_done" = no; then
- case ${prev} in
- -L | -R)
- # Internal compiler library paths should come after those
- # provided the user. The postdeps already come after the
- # user supplied libs so there is no need to process them.
- if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
- else
- _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
- fi
- ;;
- # The "-l" case would never come before the object being
- # linked, so don't bother handling this case.
- esac
- else
- if test -z "$_LT_TAGVAR(postdeps, $1)"; then
- _LT_TAGVAR(postdeps, $1)="${prev}${p}"
- else
- _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
- fi
- fi
- prev=
- ;;
-
- *.lto.$objext) ;; # Ignore GCC LTO objects
- *.$objext)
- # This assumes that the test object file only shows up
- # once in the compiler output.
- if test "$p" = "conftest.$objext"; then
- pre_test_object_deps_done=yes
- continue
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
- _LT_TAGVAR(predep_objects, $1)="$p"
- else
- _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
- fi
- else
- if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
- _LT_TAGVAR(postdep_objects, $1)="$p"
- else
- _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
- fi
- fi
- ;;
-
- *) ;; # Ignore the rest.
-
- esac
- done
-
- # Clean up.
- rm -f a.out a.exe
-else
- echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$RM -f confest.$objext
-CFLAGS=$_lt_libdeps_save_CFLAGS
-
-# PORTME: override above test on systems where it is broken
-m4_if([$1], [CXX],
-[case $host_os in
-interix[[3-9]]*)
- # Interix 3.5 installs completely hosed .la files for C++, so rather than
- # hack all around it, let's just trust "g++" to DTRT.
- _LT_TAGVAR(predep_objects,$1)=
- _LT_TAGVAR(postdep_objects,$1)=
- _LT_TAGVAR(postdeps,$1)=
- ;;
-
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
-
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-
-solaris*)
- case $cc_basename in
- CC* | sunCC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-esac
-])
-
-case " $_LT_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=
-if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
-_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
- [The directories searched by this compiler when creating a shared library])
-_LT_TAGDECL([], [predep_objects], [1],
- [Dependencies to place before and after the objects being linked to
- create a shared library])
-_LT_TAGDECL([], [postdep_objects], [1])
-_LT_TAGDECL([], [predeps], [1])
-_LT_TAGDECL([], [postdeps], [1])
-_LT_TAGDECL([], [compiler_lib_search_path], [1],
- [The library search path used internally by the compiler when linking
- a shared library])
-])# _LT_SYS_HIDDEN_LIBDEPS
-
-
-# _LT_LANG_F77_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a Fortran 77 compiler are
-# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_F77_CONFIG],
-[AC_LANG_PUSH(Fortran 77)
-if test -z "$F77" || test "X$F77" = "Xno"; then
- _lt_disable_F77=yes
-fi
-
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the F77 compiler isn't working. Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_F77" != yes; then
- # Code to be used in simple compile tests
- lt_simple_compile_test_code="\
- subroutine t
- return
- end
-"
-
- # Code to be used in simple link tests
- lt_simple_link_test_code="\
- program t
- end
-"
-
- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
- _LT_TAG_COMPILER
-
- # save warnings/boilerplate of simple test code
- _LT_COMPILER_BOILERPLATE
- _LT_LINKER_BOILERPLATE
-
- # Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
- lt_save_GCC=$GCC
- lt_save_CFLAGS=$CFLAGS
- CC=${F77-"f77"}
- CFLAGS=$FFLAGS
- compiler=$CC
- _LT_TAGVAR(compiler, $1)=$CC
- _LT_CC_BASENAME([$compiler])
- GCC=$G77
- if test -n "$compiler"; then
- AC_MSG_CHECKING([if libtool supports shared libraries])
- AC_MSG_RESULT([$can_build_shared])
-
- AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
-
- # On AIX, shared libraries and static libraries use the same namespace, and
- # are all built from PIC.
- case $host_os in
- aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
- aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
- esac
- AC_MSG_RESULT([$enable_shared])
-
- AC_MSG_CHECKING([whether to build static libraries])
- # Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
- AC_MSG_RESULT([$enable_static])
-
- _LT_TAGVAR(GCC, $1)="$G77"
- _LT_TAGVAR(LD, $1)="$LD"
-
- ## CAVEAT EMPTOR:
- ## There is no encapsulation within the following macros, do not change
- ## the running order or otherwise move them around unless you know exactly
- ## what you are doing...
- _LT_COMPILER_PIC($1)
- _LT_COMPILER_C_O($1)
- _LT_COMPILER_FILE_LOCKS($1)
- _LT_LINKER_SHLIBS($1)
- _LT_SYS_DYNAMIC_LINKER($1)
- _LT_LINKER_HARDCODE_LIBPATH($1)
-
- _LT_CONFIG($1)
- fi # test -n "$compiler"
-
- GCC=$lt_save_GCC
- CC="$lt_save_CC"
- CFLAGS="$lt_save_CFLAGS"
-fi # test "$_lt_disable_F77" != yes
-
-AC_LANG_POP
-])# _LT_LANG_F77_CONFIG
-
-
-# _LT_LANG_FC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for a Fortran compiler are
-# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_FC_CONFIG],
-[AC_LANG_PUSH(Fortran)
-
-if test -z "$FC" || test "X$FC" = "Xno"; then
- _lt_disable_FC=yes
-fi
-
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for fc test sources.
-ac_ext=${ac_fc_srcext-f}
-
-# Object file extension for compiled fc test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the FC compiler isn't working. Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
- # Code to be used in simple compile tests
- lt_simple_compile_test_code="\
- subroutine t
- return
- end
-"
-
- # Code to be used in simple link tests
- lt_simple_link_test_code="\
- program t
- end
-"
-
- # ltmain only uses $CC for tagged configurations so make sure $CC is set.
- _LT_TAG_COMPILER
-
- # save warnings/boilerplate of simple test code
- _LT_COMPILER_BOILERPLATE
- _LT_LINKER_BOILERPLATE
-
- # Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
- lt_save_GCC=$GCC
- lt_save_CFLAGS=$CFLAGS
- CC=${FC-"f95"}
- CFLAGS=$FCFLAGS
- compiler=$CC
- GCC=$ac_cv_fc_compiler_gnu
-
- _LT_TAGVAR(compiler, $1)=$CC
- _LT_CC_BASENAME([$compiler])
-
- if test -n "$compiler"; then
- AC_MSG_CHECKING([if libtool supports shared libraries])
- AC_MSG_RESULT([$can_build_shared])
-
- AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
-
- # On AIX, shared libraries and static libraries use the same namespace, and
- # are all built from PIC.
- case $host_os in
- aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
- aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
- esac
- AC_MSG_RESULT([$enable_shared])
-
- AC_MSG_CHECKING([whether to build static libraries])
- # Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
- AC_MSG_RESULT([$enable_static])
-
- _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
- _LT_TAGVAR(LD, $1)="$LD"
-
- ## CAVEAT EMPTOR:
- ## There is no encapsulation within the following macros, do not change
- ## the running order or otherwise move them around unless you know exactly
- ## what you are doing...
- _LT_SYS_HIDDEN_LIBDEPS($1)
- _LT_COMPILER_PIC($1)
- _LT_COMPILER_C_O($1)
- _LT_COMPILER_FILE_LOCKS($1)
- _LT_LINKER_SHLIBS($1)
- _LT_SYS_DYNAMIC_LINKER($1)
- _LT_LINKER_HARDCODE_LIBPATH($1)
-
- _LT_CONFIG($1)
- fi # test -n "$compiler"
-
- GCC=$lt_save_GCC
- CC=$lt_save_CC
- CFLAGS=$lt_save_CFLAGS
-fi # test "$_lt_disable_FC" != yes
-
-AC_LANG_POP
-])# _LT_LANG_FC_CONFIG
-
-
-# _LT_LANG_GCJ_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for the GNU Java Compiler compiler
-# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_GCJ_CONFIG],
-[AC_REQUIRE([LT_PROG_GCJ])dnl
-AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_CFLAGS=$CFLAGS
-lt_save_GCC=$GCC
-GCC=yes
-CC=${GCJ-"gcj"}
-CFLAGS=$GCJFLAGS
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-
-if test -n "$compiler"; then
- _LT_COMPILER_NO_RTTI($1)
- _LT_COMPILER_PIC($1)
- _LT_COMPILER_C_O($1)
- _LT_COMPILER_FILE_LOCKS($1)
- _LT_LINKER_SHLIBS($1)
- _LT_LINKER_HARDCODE_LIBPATH($1)
-
- _LT_CONFIG($1)
-fi
-
-AC_LANG_RESTORE
-
-GCC=$lt_save_GCC
-CC=$lt_save_CC
-CFLAGS=$lt_save_CFLAGS
-])# _LT_LANG_GCJ_CONFIG
-
-
-# _LT_LANG_GO_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for the GNU Go compiler
-# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_GO_CONFIG],
-[AC_REQUIRE([LT_PROG_GO])dnl
-AC_LANG_SAVE
-
-# Source file extension for Go test sources.
-ac_ext=go
-
-# Object file extension for compiled Go test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="package main; func main() { }"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='package main; func main() { }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC=$CC
-lt_save_CFLAGS=$CFLAGS
-lt_save_GCC=$GCC
-GCC=yes
-CC=${GOC-"gccgo"}
-CFLAGS=$GOFLAGS
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
-_LT_CC_BASENAME([$compiler])
-
-# Go did not exist at the time GCC didn't implicitly link libc in.
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(reload_flag, $1)=$reload_flag
-_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
-
-if test -n "$compiler"; then
- _LT_COMPILER_NO_RTTI($1)
- _LT_COMPILER_PIC($1)
- _LT_COMPILER_C_O($1)
- _LT_COMPILER_FILE_LOCKS($1)
- _LT_LINKER_SHLIBS($1)
- _LT_LINKER_HARDCODE_LIBPATH($1)
-
- _LT_CONFIG($1)
-fi
-
-AC_LANG_RESTORE
-
-GCC=$lt_save_GCC
-CC=$lt_save_CC
-CFLAGS=$lt_save_CFLAGS
-])# _LT_LANG_GO_CONFIG
-
-
-# _LT_LANG_RC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for the Windows resource compiler
-# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_RC_CONFIG],
-[AC_REQUIRE([LT_PROG_RC])dnl
-AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-lt_save_CFLAGS=$CFLAGS
-lt_save_GCC=$GCC
-GCC=
-CC=${RC-"windres"}
-CFLAGS=
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-if test -n "$compiler"; then
- :
- _LT_CONFIG($1)
-fi
-
-GCC=$lt_save_GCC
-AC_LANG_RESTORE
-CC=$lt_save_CC
-CFLAGS=$lt_save_CFLAGS
-])# _LT_LANG_RC_CONFIG
-
-
-# LT_PROG_GCJ
-# -----------
-AC_DEFUN([LT_PROG_GCJ],
-[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
- [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
- [AC_CHECK_TOOL(GCJ, gcj,)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
- AC_SUBST(GCJFLAGS)])])[]dnl
-])
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
-
-
-# LT_PROG_GO
-# ----------
-AC_DEFUN([LT_PROG_GO],
-[AC_CHECK_TOOL(GOC, gccgo,)
-])
-
-
-# LT_PROG_RC
-# ----------
-AC_DEFUN([LT_PROG_RC],
-[AC_CHECK_TOOL(RC, windres,)
-])
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_RC], [])
-
-
-# _LT_DECL_EGREP
-# --------------
-# If we don't have a new enough Autoconf to choose the best grep
-# available, choose the one first in the user's PATH.
-m4_defun([_LT_DECL_EGREP],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_REQUIRE([AC_PROG_FGREP])dnl
-test -z "$GREP" && GREP=grep
-_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
-_LT_DECL([], [EGREP], [1], [An ERE matcher])
-_LT_DECL([], [FGREP], [1], [A literal string matcher])
-dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
-AC_SUBST([GREP])
-])
-
-
-# _LT_DECL_OBJDUMP
-# --------------
-# If we don't have a new enough Autoconf to choose the best objdump
-# available, choose the one first in the user's PATH.
-m4_defun([_LT_DECL_OBJDUMP],
-[AC_CHECK_TOOL(OBJDUMP, objdump, false)
-test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
-AC_SUBST([OBJDUMP])
-])
-
-# _LT_DECL_DLLTOOL
-# ----------------
-# Ensure DLLTOOL variable is set.
-m4_defun([_LT_DECL_DLLTOOL],
-[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
-AC_SUBST([DLLTOOL])
-])
-
-# _LT_DECL_SED
-# ------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible. Prefer GNU sed if found.
-m4_defun([_LT_DECL_SED],
-[AC_PROG_SED
-test -z "$SED" && SED=sed
-Xsed="$SED -e 1s/^X//"
-_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
-_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
- [Sed that helps us avoid accidentally triggering echo(1) options like -n])
-])# _LT_DECL_SED
-
-m4_ifndef([AC_PROG_SED], [
-# NOTE: This macro has been submitted for inclusion into #
-# GNU Autoconf as AC_PROG_SED. When it is available in #
-# a released version of Autoconf we should remove this #
-# macro and use it instead. #
-
-m4_defun([AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for lt_ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
- fi
- done
- done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
- cat /dev/null > conftest.in
- lt_ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
- # Check for GNU sed and select it if it is found.
- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
- lt_cv_path_SED=$lt_ac_sed
- break
- fi
- while true; do
- cat conftest.in conftest.in >conftest.tmp
- mv conftest.tmp conftest.in
- cp conftest.in conftest.nl
- echo >>conftest.nl
- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
- cmp -s conftest.out conftest.nl || break
- # 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
- lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
- lt_ac_max=$lt_ac_count
- lt_cv_path_SED=$lt_ac_sed
- fi
- done
-done
-])
-SED=$lt_cv_path_SED
-AC_SUBST([SED])
-AC_MSG_RESULT([$SED])
-])#AC_PROG_SED
-])#m4_ifndef
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_SED], [])
-
-
-# _LT_CHECK_SHELL_FEATURES
-# ------------------------
-# Find out whether the shell is Bourne or XSI compatible,
-# or has some other useful features.
-m4_defun([_LT_CHECK_SHELL_FEATURES],
-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-AC_MSG_RESULT([$xsi_shell])
-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
-
-AC_MSG_CHECKING([whether the shell understands "+="])
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-AC_MSG_RESULT([$lt_shell_append])
-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
- lt_unset=unset
-else
- lt_unset=false
-fi
-_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
-
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
- # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
- lt_SP2NL='tr \040 \012'
- lt_NL2SP='tr \015\012 \040\040'
- ;;
- *) # EBCDIC based system
- lt_SP2NL='tr \100 \n'
- lt_NL2SP='tr \r\n \100\100'
- ;;
-esac
-_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
-_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
-])# _LT_CHECK_SHELL_FEATURES
-
-
-# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
-# ------------------------------------------------------
-# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
-# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
-m4_defun([_LT_PROG_FUNCTION_REPLACE],
-[dnl {
-sed -e '/^$1 ()$/,/^} # $1 /c\
-$1 ()\
-{\
-m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
-} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-])
-
-
-# _LT_PROG_REPLACE_SHELLFNS
-# -------------------------
-# Replace existing portable implementations of several shell functions with
-# equivalent extended shell implementations where those features are available..
-m4_defun([_LT_PROG_REPLACE_SHELLFNS],
-[if test x"$xsi_shell" = xyes; then
- _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac])
-
- _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
- func_basename_result="${1##*/}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
- func_basename_result="${1##*/}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
- # positional parameters, so assign one to ordinary parameter first.
- func_stripname_result=${3}
- func_stripname_result=${func_stripname_result#"${1}"}
- func_stripname_result=${func_stripname_result%"${2}"}])
-
- _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
- func_split_long_opt_name=${1%%=*}
- func_split_long_opt_arg=${1#*=}])
-
- _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
- func_split_short_opt_arg=${1#??}
- func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
-
- _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
- case ${1} in
- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
- *) func_lo2o_result=${1} ;;
- esac])
-
- _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
-
- _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
-
- _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
-fi
-
-if test x"$lt_shell_append" = xyes; then
- _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
- func_quote_for_eval "${2}"
-dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
- eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
-
- # Save a `func_append' function call where possible by direct use of '+='
- sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-else
- # Save a `func_append' function call even when '+=' is not available
- sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
- AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
-fi
-])
-
-# _LT_PATH_CONVERSION_FUNCTIONS
-# -----------------------------
-# Determine which file name conversion functions should be used by
-# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
-# for certain cross-compile configurations and native mingw.
-m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_MSG_CHECKING([how to convert $build file names to $host format])
-AC_CACHE_VAL(lt_cv_to_host_file_cmd,
-[case $host in
- *-*-mingw* )
- case $build in
- *-*-mingw* ) # actually msys
- lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
- ;;
- *-*-cygwin* )
- lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
- ;;
- * ) # otherwise, assume *nix
- lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
- ;;
- esac
- ;;
- *-*-cygwin* )
- case $build in
- *-*-mingw* ) # actually msys
- lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
- ;;
- *-*-cygwin* )
- lt_cv_to_host_file_cmd=func_convert_file_noop
- ;;
- * ) # otherwise, assume *nix
- lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
- ;;
- esac
- ;;
- * ) # unhandled hosts (and "normal" native builds)
- lt_cv_to_host_file_cmd=func_convert_file_noop
- ;;
-esac
-])
-to_host_file_cmd=$lt_cv_to_host_file_cmd
-AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
-_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
- [0], [convert $build file names to $host format])dnl
-
-AC_MSG_CHECKING([how to convert $build file names to toolchain format])
-AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
-[#assume ordinary cross tools, or native build.
-lt_cv_to_tool_file_cmd=func_convert_file_noop
-case $host in
- *-*-mingw* )
- case $build in
- *-*-mingw* ) # actually msys
- lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
- ;;
- esac
- ;;
-esac
-])
-to_tool_file_cmd=$lt_cv_to_tool_file_cmd
-AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
-_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
- [0], [convert $build files to toolchain format])dnl
-])# _LT_PATH_CONVERSION_FUNCTIONS
-
-# Helper functions for option handling. -*- Autoconf -*-
-#
-# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
-# Written by Gary V. Vaughan, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 7 ltoptions.m4
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
-
-
-# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
-# ------------------------------------------
-m4_define([_LT_MANGLE_OPTION],
-[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
-
-
-# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
-# ---------------------------------------
-# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
-# matching handler defined, dispatch to it. Other OPTION-NAMEs are
-# saved as a flag.
-m4_define([_LT_SET_OPTION],
-[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
-m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
- _LT_MANGLE_DEFUN([$1], [$2]),
- [m4_warning([Unknown $1 option `$2'])])[]dnl
-])
-
-
-# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
-# ------------------------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-m4_define([_LT_IF_OPTION],
-[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
-
-
-# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
-# -------------------------------------------------------
-# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
-# are set.
-m4_define([_LT_UNLESS_OPTIONS],
-[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
- [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
- [m4_define([$0_found])])])[]dnl
-m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
-])[]dnl
-])
-
-
-# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
-# ----------------------------------------
-# OPTION-LIST is a space-separated list of Libtool options associated
-# with MACRO-NAME. If any OPTION has a matching handler declared with
-# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
-# the unknown option and exit.
-m4_defun([_LT_SET_OPTIONS],
-[# Set options
-m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
- [_LT_SET_OPTION([$1], _LT_Option)])
-
-m4_if([$1],[LT_INIT],[
- dnl
- dnl Simply set some default values (i.e off) if boolean options were not
- dnl specified:
- _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
- ])
- _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
- ])
- dnl
- dnl If no reference was made to various pairs of opposing options, then
- dnl we run the default mode handler for the pair. For example, if neither
- dnl `shared' nor `disable-shared' was passed, we enable building of shared
- dnl archives by default:
- _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
- _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
- _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
- _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
- [_LT_ENABLE_FAST_INSTALL])
- ])
-])# _LT_SET_OPTIONS
-
-
-
-# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
-# -----------------------------------------
-m4_define([_LT_MANGLE_DEFUN],
-[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
-
-
-# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
-# -----------------------------------------------
-m4_define([LT_OPTION_DEFINE],
-[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
-])# LT_OPTION_DEFINE
-
-
-# dlopen
-# ------
-LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
-])
-
-AU_DEFUN([AC_LIBTOOL_DLOPEN],
-[_LT_SET_OPTION([LT_INIT], [dlopen])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `dlopen' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
-
-
-# win32-dll
-# ---------
-# Declare package support for building win32 dll's.
-LT_OPTION_DEFINE([LT_INIT], [win32-dll],
-[enable_win32_dll=yes
-
-case $host in
-*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
- ;;
-esac
-
-test -z "$AS" && AS=as
-_LT_DECL([], [AS], [1], [Assembler program])dnl
-
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
-
-test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
-])# win32-dll
-
-AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-_LT_SET_OPTION([LT_INIT], [win32-dll])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `win32-dll' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
-
-
-# _LT_ENABLE_SHARED([DEFAULT])
-# ----------------------------
-# implement the --enable-shared flag, and supports the `shared' and
-# `disable-shared' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_SHARED],
-[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([shared],
- [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
- [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
-
- _LT_DECL([build_libtool_libs], [enable_shared], [0],
- [Whether or not to build shared libraries])
-])# _LT_ENABLE_SHARED
-
-LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
-
-# Old names:
-AC_DEFUN([AC_ENABLE_SHARED],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
-])
-
-AC_DEFUN([AC_DISABLE_SHARED],
-[_LT_SET_OPTION([LT_INIT], [disable-shared])
-])
-
-AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_ENABLE_SHARED], [])
-dnl AC_DEFUN([AM_DISABLE_SHARED], [])
-
-
-
-# _LT_ENABLE_STATIC([DEFAULT])
-# ----------------------------
-# implement the --enable-static flag, and support the `static' and
-# `disable-static' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_STATIC],
-[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([static],
- [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
- [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_static=yes ;;
- no) enable_static=no ;;
- *)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
-
- _LT_DECL([build_old_libs], [enable_static], [0],
- [Whether or not to build static libraries])
-])# _LT_ENABLE_STATIC
-
-LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
-
-# Old names:
-AC_DEFUN([AC_ENABLE_STATIC],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
-])
-
-AC_DEFUN([AC_DISABLE_STATIC],
-[_LT_SET_OPTION([LT_INIT], [disable-static])
-])
-
-AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_ENABLE_STATIC], [])
-dnl AC_DEFUN([AM_DISABLE_STATIC], [])
-
-
-
-# _LT_ENABLE_FAST_INSTALL([DEFAULT])
-# ----------------------------------
-# implement the --enable-fast-install flag, and support the `fast-install'
-# and `disable-fast-install' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-m4_define([_LT_ENABLE_FAST_INSTALL],
-[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
-AC_ARG_ENABLE([fast-install],
- [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
- [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_fast_install=yes ;;
- no) enable_fast_install=no ;;
- *)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
-
-_LT_DECL([fast_install], [enable_fast_install], [0],
- [Whether or not to optimize for fast installation])dnl
-])# _LT_ENABLE_FAST_INSTALL
-
-LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
-LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
-
-# Old names:
-AU_DEFUN([AC_ENABLE_FAST_INSTALL],
-[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `fast-install' option into LT_INIT's first parameter.])
-])
-
-AU_DEFUN([AC_DISABLE_FAST_INSTALL],
-[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `disable-fast-install' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
-dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
-
-
-# _LT_WITH_PIC([MODE])
-# --------------------
-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
-# LT_INIT options.
-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
-m4_define([_LT_WITH_PIC],
-[AC_ARG_WITH([pic],
- [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
- [lt_p=${PACKAGE-default}
- case $withval in
- yes|no) pic_mode=$withval ;;
- *)
- pic_mode=default
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for lt_pkg in $withval; do
- IFS="$lt_save_ifs"
- if test "X$lt_pkg" = "X$lt_p"; then
- pic_mode=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [pic_mode=default])
-
-test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
-
-_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
-])# _LT_WITH_PIC
-
-LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
-LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
-
-# Old name:
-AU_DEFUN([AC_LIBTOOL_PICMODE],
-[_LT_SET_OPTION([LT_INIT], [pic-only])
-AC_DIAGNOSE([obsolete],
-[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `pic-only' option into LT_INIT's first parameter.])
-])
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
-
-
-m4_define([_LTDL_MODE], [])
-LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
- [m4_define([_LTDL_MODE], [nonrecursive])])
-LT_OPTION_DEFINE([LTDL_INIT], [recursive],
- [m4_define([_LTDL_MODE], [recursive])])
-LT_OPTION_DEFINE([LTDL_INIT], [subproject],
- [m4_define([_LTDL_MODE], [subproject])])
-
-m4_define([_LTDL_TYPE], [])
-LT_OPTION_DEFINE([LTDL_INIT], [installable],
- [m4_define([_LTDL_TYPE], [installable])])
-LT_OPTION_DEFINE([LTDL_INIT], [convenience],
- [m4_define([_LTDL_TYPE], [convenience])])
-
-# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
-#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
-# Written by Gary V. Vaughan, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 6 ltsugar.m4
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
-
-
-# lt_join(SEP, ARG1, [ARG2...])
-# -----------------------------
-# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
-# associated separator.
-# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
-# versions in m4sugar had bugs.
-m4_define([lt_join],
-[m4_if([$#], [1], [],
- [$#], [2], [[$2]],
- [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
-m4_define([_lt_join],
-[m4_if([$#$2], [2], [],
- [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
-
-
-# lt_car(LIST)
-# lt_cdr(LIST)
-# ------------
-# Manipulate m4 lists.
-# These macros are necessary as long as will still need to support
-# Autoconf-2.59 which quotes differently.
-m4_define([lt_car], [[$1]])
-m4_define([lt_cdr],
-[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
- [$#], 1, [],
- [m4_dquote(m4_shift($@))])])
-m4_define([lt_unquote], $1)
-
-
-# lt_append(MACRO-NAME, STRING, [SEPARATOR])
-# ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
-# Note that neither SEPARATOR nor STRING are expanded; they are appended
-# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
-# No SEPARATOR is output if MACRO-NAME was previously undefined (different
-# than defined and empty).
-#
-# This macro is needed until we can rely on Autoconf 2.62, since earlier
-# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
-m4_define([lt_append],
-[m4_define([$1],
- m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
-
-
-
-# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
-# ----------------------------------------------------------
-# Produce a SEP delimited list of all paired combinations of elements of
-# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
-# has the form PREFIXmINFIXSUFFIXn.
-# Needed until we can rely on m4_combine added in Autoconf 2.62.
-m4_define([lt_combine],
-[m4_if(m4_eval([$# > 3]), [1],
- [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
-[[m4_foreach([_Lt_prefix], [$2],
- [m4_foreach([_Lt_suffix],
- ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
- [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
-
-
-# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
-# -----------------------------------------------------------------------
-# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
-# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
-m4_define([lt_if_append_uniq],
-[m4_ifdef([$1],
- [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
- [lt_append([$1], [$2], [$3])$4],
- [$5])],
- [lt_append([$1], [$2], [$3])$4])])
-
-
-# lt_dict_add(DICT, KEY, VALUE)
-# -----------------------------
-m4_define([lt_dict_add],
-[m4_define([$1($2)], [$3])])
-
-
-# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
-# --------------------------------------------
-m4_define([lt_dict_add_subkey],
-[m4_define([$1($2:$3)], [$4])])
-
-
-# lt_dict_fetch(DICT, KEY, [SUBKEY])
-# ----------------------------------
-m4_define([lt_dict_fetch],
-[m4_ifval([$3],
- m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
- m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
-
-
-# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
-# -----------------------------------------------------------------
-m4_define([lt_if_dict_fetch],
-[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
- [$5],
- [$6])])
-
-
-# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
-# --------------------------------------------------------------
-m4_define([lt_dict_filter],
-[m4_if([$5], [], [],
- [lt_join(m4_quote(m4_default([$4], [[, ]])),
- lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
- [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
-])
-
-# ltversion.m4 -- version numbers -*- Autoconf -*-
-#
-# Copyright (C) 2004 Free Software Foundation, Inc.
-# Written by Scott James Remnant, 2004
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# @configure_input@
-
-# serial 3337 ltversion.m4
-# This file is part of GNU Libtool
-
-m4_define([LT_PACKAGE_VERSION], [2.4.2])
-m4_define([LT_PACKAGE_REVISION], [1.3337])
-
-AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.4.2'
-macro_revision='1.3337'
-_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
-_LT_DECL(, macro_revision, 0)
-])
-
-# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
-#
-# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
-# Written by Scott James Remnant, 2004.
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-# serial 5 lt~obsolete.m4
-
-# These exist entirely to fool aclocal when bootstrapping libtool.
-#
-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
-# which have later been changed to m4_define as they aren't part of the
-# exported API, or moved to Autoconf or Automake where they belong.
-#
-# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
-# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
-# using a macro with the same name in our local m4/libtool.m4 it'll
-# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
-# and doesn't know about Autoconf macros at all.)
-#
-# So we provide this file, which has a silly filename so it's always
-# included after everything else. This provides aclocal with the
-# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
-# because those macros already exist, or will be overwritten later.
-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
-#
-# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
-# Yes, that means every name once taken will need to remain here until
-# we give up compatibility with versions before 1.7, at which point
-# we need to keep only those names which we still refer to.
-
-# This is to help aclocal find these macros, as it can't see m4_define.
-AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
-
-m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
-m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
-m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
-m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
-m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
-m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
-m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
-m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
-m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
-m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
-m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
-m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
-m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
-m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
-m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
-m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
-m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
-m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
-m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
-m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
-m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
-m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
-m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
-m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
-m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
-m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
-m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
-m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
-m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
-m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
-m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
-m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
-m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
-m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
-m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
-m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
-m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
-m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
-m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
-m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
-m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
-m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
-m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
-m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
-m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
-m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
-m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
-m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
-m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
-m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
-m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
-m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
-m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
-m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
-m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
-m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
-
# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008, 2011 Free Software
# Foundation, Inc.
#
@@ -8650,6 +59,28 @@
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+# Figure out how to run the assembler. -*- Autoconf -*-
+
+# Copyright (C) 2001, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# serial 5
+
+# AM_PROG_AS
+# ----------
+AC_DEFUN([AM_PROG_AS],
+[# By default we simply use the C compiler to build assembly code.
+AC_REQUIRE([AC_PROG_CC])
+test "${CCAS+set}" = set || CCAS=$CC
+test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
+AC_ARG_VAR([CCAS], [assembler compiler command (defaults to CC)])
+AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)])
+_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES([CCAS])])dnl
+])
+
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
# Copyright (C) 2001, 2003, 2005, 2011 Free Software Foundation, Inc.
@@ -9007,18 +438,6 @@
[AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
])
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS.
-AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
-
# Do all the work for Automake. -*- Autoconf -*-
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
@@ -9704,3 +1123,9 @@
AC_SUBST([am__untar])
]) # _AM_PROG_TAR
+m4_include([m4/as-gcc-inline-assembly.m4])
+m4_include([m4/libtool.m4])
+m4_include([m4/ltoptions.m4])
+m4_include([m4/ltsugar.m4])
+m4_include([m4/ltversion.m4])
+m4_include([m4/lt~obsolete.m4])
diff --git a/celt/_kiss_fft_guts.h b/celt/_kiss_fft_guts.h
index f0c6976..aefe490 100644
--- a/celt/_kiss_fft_guts.h
+++ b/celt/_kiss_fft_guts.h
@@ -94,11 +94,11 @@
do {(res).r = ADD32((res).r,(a).r); (res).i = SUB32((res).i,(a).i); \
}while(0)
-#if defined(ARMv4_ASM)
+#if defined(OPUS_ARM_INLINE_ASM)
#include "arm/kiss_fft_armv4.h"
#endif
-#if defined(ARMv5E_ASM)
+#if defined(OPUS_ARM_INLINE_EDSP)
#include "arm/kiss_fft_armv5e.h"
#endif
diff --git a/celt/arch.h b/celt/arch.h
index f9c9856..3bbcd36 100644
--- a/celt/arch.h
+++ b/celt/arch.h
@@ -35,6 +35,7 @@
#define ARCH_H
#include "opus_types.h"
+#include "opus_defines.h"
# if !defined(__GNUC_PREREQ)
# if defined(__GNUC__)&&defined(__GNUC_MINOR__)
@@ -54,7 +55,7 @@
#ifdef __GNUC__
__attribute__((noreturn))
#endif
-static inline void _celt_fatal(const char *str, const char *file, int line)
+static OPUS_INLINE void _celt_fatal(const char *str, const char *file, int line)
{
fprintf (stderr, "Fatal (internal) error in %s, line %d: %s\n", file, line, str);
abort();
@@ -113,9 +114,9 @@
#include "fixed_generic.h"
-#ifdef ARMv5E_ASM
+#ifdef OPUS_ARM_INLINE_EDSP
#include "arm/fixed_armv5e.h"
-#elif defined (ARMv4_ASM)
+#elif defined (OPUS_ARM_INLINE_ASM)
#include "arm/fixed_armv4.h"
#elif defined (BFIN_ASM)
#include "fixed_bfin.h"
diff --git a/celt/arm/arm_celt_map.c b/celt/arm/arm_celt_map.c
new file mode 100644
index 0000000..547a84d
--- /dev/null
+++ b/celt/arm/arm_celt_map.c
@@ -0,0 +1,49 @@
+/* Copyright (c) 2010 Xiph.Org Foundation
+ * Copyright (c) 2013 Parrot */
+/*
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+ OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include "pitch.h"
+
+#if defined(OPUS_HAVE_RTCD)
+
+# if defined(FIXED_POINT)
+opus_val32 (*const CELT_PITCH_XCORR_IMPL[OPUS_ARCHMASK+1])(const opus_val16 *,
+ const opus_val16 *, opus_val32 *, int , int) = {
+ celt_pitch_xcorr_c, /* ARMv4 */
+ MAY_HAVE_EDSP(celt_pitch_xcorr), /* EDSP */
+ MAY_HAVE_MEDIA(celt_pitch_xcorr), /* Media */
+ MAY_HAVE_NEON(celt_pitch_xcorr) /* NEON */
+};
+# else
+# error "Floating-point implementation is not supported by ARM asm yet." \
+ "Reconfigure with --disable-rtcd or send patches."
+# endif
+
+#endif
diff --git a/celt/arm/armcpu.c b/celt/arm/armcpu.c
index aabcc71..1768525 100644
--- a/celt/arm/armcpu.c
+++ b/celt/arm/armcpu.c
@@ -49,13 +49,13 @@
# define WIN32_EXTRA_LEAN
# include <windows.h>
-static inline opus_uint32 opus_cpu_capabilities(void){
+static OPUS_INLINE opus_uint32 opus_cpu_capabilities(void){
opus_uint32 flags;
flags=0;
- /* MSVC has no inline __asm support for ARM, but it does let you __emit
+ /* MSVC has no OPUS_INLINE __asm support for ARM, but it does let you __emit
* instructions via their assembled hex code.
* All of these instructions should be essentially nops. */
-# if defined(ARMv5E_ASM)
+# if defined(OPUS_ARM_MAY_HAVE_EDSP)
__try{
/*PLD [r13]*/
__emit(0xF5DDF000);
@@ -64,7 +64,7 @@
__except(GetExceptionCode()==EXCEPTION_ILLEGAL_INSTRUCTION){
/*Ignore exception.*/
}
-# if defined(ARMv6E_ASM)
+# if defined(OPUS_ARM_MAY_HAVE_MEDIA)
__try{
/*SHADD8 r3,r3,r3*/
__emit(0xE6333F93);
@@ -73,7 +73,7 @@
__except(GetExceptionCode()==EXCEPTION_ILLEGAL_INSTRUCTION){
/*Ignore exception.*/
}
-# if defined(ARM_HAVE_NEON)
+# if defined(OPUS_ARM_MAY_HAVE_NEON)
__try{
/*VORR q0,q0,q0*/
__emit(0xF2200150);
@@ -107,19 +107,26 @@
while(fgets(buf, 512, cpuinfo) != NULL)
{
+# if defined(OPUS_ARM_MAY_HAVE_EDSP) || defined(OPUS_ARM_MAY_HAVE_NEON)
/* Search for edsp and neon flag */
if(memcmp(buf, "Features", 8) == 0)
{
char *p;
+# if defined(OPUS_ARM_MAY_HAVE_EDSP)
p = strstr(buf, " edsp");
if(p != NULL && (p[5] == ' ' || p[5] == '\n'))
flags |= OPUS_CPU_ARM_EDSP;
+# endif
+# if defined(OPUS_ARM_MAY_HAVE_NEON)
p = strstr(buf, " neon");
if(p != NULL && (p[5] == ' ' || p[5] == '\n'))
flags |= OPUS_CPU_ARM_NEON;
+# endif
}
+# endif
+# if defined(OPUS_ARM_MAY_HAVE_MEDIA)
/* Search for media capabilities (>= ARMv6) */
if(memcmp(buf, "CPU architecture:", 17) == 0)
{
@@ -129,6 +136,7 @@
if(version >= 6)
flags |= OPUS_CPU_ARM_MEDIA;
}
+# endif
}
fclose(cpuinfo);
diff --git a/celt/arm/armcpu.h b/celt/arm/armcpu.h
index 68d80fe..ac57446 100644
--- a/celt/arm/armcpu.h
+++ b/celt/arm/armcpu.h
@@ -25,11 +25,47 @@
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-/* Original code from libtheora modified to suit to Opus */
+#if !defined(ARMCPU_H)
+# define ARMCPU_H
-#ifndef ARMCPU_H
-#define ARMCPU_H
+# if defined(OPUS_ARM_MAY_HAVE_EDSP)
+# define MAY_HAVE_EDSP(name) name ## _edsp
+# else
+# define MAY_HAVE_EDSP(name) name ## _c
+# endif
+# if defined(OPUS_ARM_MAY_HAVE_MEDIA)
+# define MAY_HAVE_MEDIA(name) name ## _media
+# else
+# define MAY_HAVE_MEDIA(name) MAY_HAVE_EDSP(name)
+# endif
+
+# if defined(OPUS_ARM_MAY_HAVE_NEON)
+# define MAY_HAVE_NEON(name) name ## _neon
+# else
+# define MAY_HAVE_NEON(name) MAY_HAVE_MEDIA(name)
+# endif
+
+# if defined(OPUS_ARM_PRESUME_EDSP)
+# define PRESUME_EDSP(name) name ## _edsp
+# else
+# define PRESUME_EDSP(name) name ## _c
+# endif
+
+# if defined(OPUS_ARM_PRESUME_MEDIA)
+# define PRESUME_MEDIA(name) name ## _media
+# else
+# define PRESUME_MEDIA(name) PRESUME_EDSP(name)
+# endif
+
+# if defined(OPUS_ARM_PRESUME_NEON)
+# define PRESUME_NEON(name) name ## _neon
+# else
+# define PRESUME_NEON(name) PRESUME_MEDIA(name)
+# endif
+
+# if defined(OPUS_HAVE_RTCD)
int opus_select_arch(void);
+# endif
#endif
diff --git a/celt/arm/armopts.s.in b/celt/arm/armopts.s.in
new file mode 100644
index 0000000..3d8aaf2
--- /dev/null
+++ b/celt/arm/armopts.s.in
@@ -0,0 +1,37 @@
+/* Copyright (C) 2013 Mozilla Corporation */
+/*
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+ OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+; Set the following to 1 if we have EDSP instructions
+; (LDRD/STRD, etc., ARMv5E and later).
+OPUS_ARM_MAY_HAVE_EDSP * @OPUS_ARM_MAY_HAVE_EDSP@
+
+; Set the following to 1 if we have ARMv6 media instructions.
+OPUS_ARM_MAY_HAVE_MEDIA * @OPUS_ARM_MAY_HAVE_MEDIA@
+
+; Set the following to 1 if we have NEON (some ARMv7)
+OPUS_ARM_MAY_HAVE_NEON * @OPUS_ARM_MAY_HAVE_NEON@
+
+END
diff --git a/celt/arm/celt_pitch_xcorr_arm.s b/celt/arm/celt_pitch_xcorr_arm.s
new file mode 100644
index 0000000..09917b1
--- /dev/null
+++ b/celt/arm/celt_pitch_xcorr_arm.s
@@ -0,0 +1,545 @@
+; Copyright (c) 2007-2008 CSIRO
+; Copyright (c) 2007-2009 Xiph.Org Foundation
+; Copyright (c) 2013 Parrot
+; Written by Aurélien Zanelli
+;
+; Redistribution and use in source and binary forms, with or without
+; modification, are permitted provided that the following conditions
+; are met:
+;
+; - Redistributions of source code must retain the above copyright
+; notice, this list of conditions and the following disclaimer.
+;
+; - Redistributions in binary form must reproduce the above copyright
+; notice, this list of conditions and the following disclaimer in the
+; documentation and/or other materials provided with the distribution.
+;
+; THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+; ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+; LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+; A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+; OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+; EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+; PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+; LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+; NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+; SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ AREA |.text|, CODE, READONLY
+
+ GET celt/arm/armopts.s
+
+IF OPUS_ARM_MAY_HAVE_EDSP
+ EXPORT celt_pitch_xcorr_edsp
+ENDIF
+
+IF OPUS_ARM_MAY_HAVE_NEON
+ EXPORT celt_pitch_xcorr_neon
+ENDIF
+
+IF OPUS_ARM_MAY_HAVE_NEON
+
+; Compute sum[k]=sum(x[j]*y[j+k],j=0...len-1), k=0...3
+xcorr_kernel_neon PROC
+ ; input:
+ ; r3 = int len
+ ; r4 = opus_val16 *x
+ ; r5 = opus_val16 *y
+ ; q0 = opus_val32 sum[4]
+ ; output:
+ ; q0 = opus_val32 sum[4]
+ ; preserved: r0-r3, r6-r11, d2, q4-q7, q9-q15
+ ; internal usage:
+ ; r12 = int j
+ ; d3 = y_3|y_2|y_1|y_0
+ ; q2 = y_B|y_A|y_9|y_8|y_7|y_6|y_5|y_4
+ ; q3 = x_7|x_6|x_5|x_4|x_3|x_2|x_1|x_0
+ ; q8 = scratch
+ ;
+ ; Load y[0...3]
+ ; This requires len>0 to always be valid (which we assert in the C code).
+ VLD1.16 {d5}, [r5]!
+ SUBS r12, r3, #8
+ BLE xcorr_kernel_neon_process4
+; Process 8 samples at a time.
+; This loop loads one y value more than we actually need. Therefore we have to
+; stop as soon as there are 8 or fewer samples left (instead of 7), to avoid
+; reading past the end of the array.
+xcorr_kernel_neon_process8
+ ; This loop has 19 total instructions (10 cycles to issue, minimum), with
+ ; - 2 cycles of ARM insrtuctions,
+ ; - 10 cycles of load/store/byte permute instructions, and
+ ; - 9 cycles of data processing instructions.
+ ; On a Cortex A8, we dual-issue the maximum amount (9 cycles) between the
+ ; latter two categories, meaning the whole loop should run in 10 cycles per
+ ; iteration, barring cache misses.
+ ;
+ ; Load x[0...7]
+ VLD1.16 {d6, d7}, [r4]!
+ ; Unlike VMOV, VAND is a data processsing instruction (and doesn't get
+ ; assembled to VMOV, like VORR would), so it dual-issues with the prior VLD1.
+ VAND d3, d5, d5
+ SUBS r12, r12, #8
+ ; Load y[4...11]
+ VLD1.16 {d4, d5}, [r5]!
+ VMLAL.S16 q0, d3, d6[0]
+ VEXT.16 d16, d3, d4, #1
+ VMLAL.S16 q0, d4, d7[0]
+ VEXT.16 d17, d4, d5, #1
+ VMLAL.S16 q0, d16, d6[1]
+ VEXT.16 d16, d3, d4, #2
+ VMLAL.S16 q0, d17, d7[1]
+ VEXT.16 d17, d4, d5, #2
+ VMLAL.S16 q0, d16, d6[2]
+ VEXT.16 d16, d3, d4, #3
+ VMLAL.S16 q0, d17, d7[2]
+ VEXT.16 d17, d4, d5, #3
+ VMLAL.S16 q0, d16, d6[3]
+ VMLAL.S16 q0, d17, d7[3]
+ BGT xcorr_kernel_neon_process8
+; Process 4 samples here if we have > 4 left (still reading one extra y value).
+xcorr_kernel_neon_process4
+ ADDS r12, r12, #4
+ BLE xcorr_kernel_neon_process2
+ ; Load x[0...3]
+ VLD1.16 d6, [r4]!
+ ; Use VAND since it's a data processing instruction again.
+ VAND d4, d5, d5
+ SUB r12, r12, #4
+ ; Load y[4...7]
+ VLD1.16 d5, [r5]!
+ VMLAL.S16 q0, d4, d6[0]
+ VEXT.16 d16, d4, d5, #1
+ VMLAL.S16 q0, d16, d6[1]
+ VEXT.16 d16, d4, d5, #2
+ VMLAL.S16 q0, d16, d6[2]
+ VEXT.16 d16, d4, d5, #3
+ VMLAL.S16 q0, d16, d6[3]
+; Process 2 samples here if we have > 2 left (still reading one extra y value).
+xcorr_kernel_neon_process2
+ ADDS r12, r12, #2
+ BLE xcorr_kernel_neon_process1
+ ; Load x[0...1]
+ VLD2.16 {d6[],d7[]}, [r4]!
+ ; Use VAND since it's a data processing instruction again.
+ VAND d4, d5, d5
+ SUB r12, r12, #2
+ ; Load y[4...5]
+ VLD1.32 {d5[]}, [r5]!
+ VMLAL.S16 q0, d4, d6
+ VEXT.16 d16, d4, d5, #1
+ ; Replace bottom copy of {y5,y4} in d5 with {y3,y2} from d4, using VSRI
+ ; instead of VEXT, since it's a data-processing instruction.
+ VSRI.64 d5, d4, #32
+ VMLAL.S16 q0, d16, d7
+; Process 1 sample using the extra y value we loaded above.
+xcorr_kernel_neon_process1
+ ; Load next *x
+ VLD1.16 {d6[]}, [r4]!
+ ADDS r12, r12, #1
+ ; y[0...3] are left in d5 from prior iteration(s) (if any)
+ VMLAL.S16 q0, d5, d6
+ MOVLE pc, lr
+; Now process 1 last sample, not reading ahead.
+ ; Load last *y
+ VLD1.16 {d4[]}, [r5]!
+ VSRI.64 d4, d5, #16
+ ; Load last *x
+ VLD1.16 {d6[]}, [r4]!
+ VMLAL.S16 q0, d4, d6
+ MOV pc, lr
+ ENDP
+
+; opus_val32 celt_pitch_xcorr_neon(opus_val16 *_x, opus_val16 *_y,
+; opus_val32 *xcorr, int len, int max_pitch)
+celt_pitch_xcorr_neon PROC
+ ; input:
+ ; r0 = opus_val16 *_x
+ ; r1 = opus_val16 *_y
+ ; r2 = opus_val32 *xcorr
+ ; r3 = int len
+ ; output:
+ ; r0 = int maxcorr
+ ; internal usage:
+ ; r4 = opus_val16 *x (for xcorr_kernel_neon())
+ ; r5 = opus_val16 *y (for xcorr_kernel_neon())
+ ; r6 = int max_pitch
+ ; r12 = int j
+ ; q15 = int maxcorr[4] (q15 is not used by xcorr_kernel_neon())
+ STMFD sp!, {r4-r6, lr}
+ LDR r6, [sp, #16]
+ VMOV.S32 q15, #1
+ ; if (max_pitch < 4) goto celt_pitch_xcorr_neon_process4_done
+ SUBS r6, r6, #4
+ BLT celt_pitch_xcorr_neon_process4_done
+celt_pitch_xcorr_neon_process4
+ ; xcorr_kernel_neon parameters:
+ ; r3 = len, r4 = _x, r5 = _y, q0 = {0, 0, 0, 0}
+ MOV r4, r0
+ MOV r5, r1
+ VEOR q0, q0, q0
+ ; xcorr_kernel_neon only modifies r4, r5, r12, and q0...q3.
+ ; So we don't save/restore any other registers.
+ BL xcorr_kernel_neon
+ SUBS r6, r6, #4
+ VST1.32 {q0}, [r2]!
+ ; _y += 4
+ ADD r1, r1, #8
+ VMAX.S32 q15, q15, q0
+ ; if (max_pitch < 4) goto celt_pitch_xcorr_neon_process4_done
+ BGE celt_pitch_xcorr_neon_process4
+; We have less than 4 sums left to compute.
+celt_pitch_xcorr_neon_process4_done
+ ADDS r6, r6, #4
+ ; Reduce maxcorr to a single value
+ VMAX.S32 d30, d30, d31
+ VPMAX.S32 d30, d30, d30
+ ; if (max_pitch <= 0) goto celt_pitch_xcorr_neon_done
+ BLE celt_pitch_xcorr_neon_done
+; Now compute each remaining sum one at a time.
+celt_pitch_xcorr_neon_process_remaining
+ MOV r4, r0
+ MOV r5, r1
+ VMOV.I32 q0, #0
+ SUBS r12, r3, #8
+ BLT celt_pitch_xcorr_neon_process_remaining4
+; Sum terms 8 at a time.
+celt_pitch_xcorr_neon_process_remaining_loop8
+ ; Load x[0...7]
+ VLD1.16 {q1}, [r4]!
+ ; Load y[0...7]
+ VLD1.16 {q2}, [r5]!
+ SUBS r12, r12, #8
+ VMLAL.S16 q0, d4, d2
+ VMLAL.S16 q0, d5, d3
+ BGE celt_pitch_xcorr_neon_process_remaining_loop8
+; Sum terms 4 at a time.
+celt_pitch_xcorr_neon_process_remaining4
+ ADDS r12, r12, #4
+ BLT celt_pitch_xcorr_neon_process_remaining4_done
+ ; Load x[0...3]
+ VLD1.16 {d2}, [r4]!
+ ; Load y[0...3]
+ VLD1.16 {d3}, [r5]!
+ SUB r12, r12, #4
+ VMLAL.S16 q0, d3, d2
+celt_pitch_xcorr_neon_process_remaining4_done
+ ; Reduce the sum to a single value.
+ VADD.S32 d0, d0, d1
+ VPADDL.S32 d0, d0
+ ADDS r12, r12, #4
+ BLE celt_pitch_xcorr_neon_process_remaining_loop_done
+; Sum terms 1 at a time.
+celt_pitch_xcorr_neon_process_remaining_loop1
+ VLD1.16 {d2[]}, [r4]!
+ VLD1.16 {d3[]}, [r5]!
+ SUBS r12, r12, #1
+ VMLAL.S16 q0, d2, d3
+ BGT celt_pitch_xcorr_neon_process_remaining_loop1
+celt_pitch_xcorr_neon_process_remaining_loop_done
+ VST1.32 {d0[0]}, [r2]!
+ VMAX.S32 d30, d30, d0
+ SUBS r6, r6, #1
+ ; _y++
+ ADD r1, r1, #2
+ ; if (--max_pitch > 0) goto celt_pitch_xcorr_neon_process_remaining
+ BGT celt_pitch_xcorr_neon_process_remaining
+celt_pitch_xcorr_neon_done
+ VMOV.32 r0, d30[0]
+ LDMFD sp!, {r4-r6, pc}
+ ENDP
+
+ENDIF
+
+IF OPUS_ARM_MAY_HAVE_EDSP
+
+; This will get used on ARMv7 devices without NEON, so it has been optimized
+; to take advantage of dual-issuing where possible.
+xcorr_kernel_edsp PROC
+ ; input:
+ ; r3 = int len
+ ; r4 = opus_val16 *_x (must be 32-bit aligned)
+ ; r5 = opus_val16 *_y (must be 32-bit aligned)
+ ; r6...r9 = opus_val32 sum[4]
+ ; output:
+ ; r6...r9 = opus_val32 sum[4]
+ ; preserved: r0-r5
+ ; internal usage
+ ; r2 = int j
+ ; r12,r14 = opus_val16 x[4]
+ ; r10,r11 = opus_val16 y[4]
+ STMFD sp!, {r2,r4,r5,lr}
+ LDR r10, [r5], #4 ; Load y[0...1]
+ SUBS r2, r3, #4 ; j = len-4
+ LDR r11, [r5], #4 ; Load y[2...3]
+ BLE xcorr_kernel_edsp_process4_done
+ LDR r12, [r4], #4 ; Load x[0...1]
+ ; Stall
+xcorr_kernel_edsp_process4
+ ; The multiplies must issue from pipeline 0, and can't dual-issue with each
+ ; other. Every other instruction here dual-issues with a multiply, and is
+ ; thus "free". There should be no stalls in the body of the loop.
+ SMLABB r6, r12, r10, r6 ; sum[0] = MAC16_16(sum[0],x_0,y_0)
+ LDR r14, [r4], #4 ; Load x[2...3]
+ SMLABT r7, r12, r10, r7 ; sum[1] = MAC16_16(sum[1],x_0,y_1)
+ SUBS r2, r2, #4 ; j-=4
+ SMLABB r8, r12, r11, r8 ; sum[2] = MAC16_16(sum[2],x_0,y_2)
+ SMLABT r9, r12, r11, r9 ; sum[3] = MAC16_16(sum[3],x_0,y_3)
+ SMLATT r6, r12, r10, r6 ; sum[0] = MAC16_16(sum[0],x_1,y_1)
+ LDR r10, [r5], #4 ; Load y[4...5]
+ SMLATB r7, r12, r11, r7 ; sum[1] = MAC16_16(sum[1],x_1,y_2)
+ SMLATT r8, r12, r11, r8 ; sum[2] = MAC16_16(sum[2],x_1,y_3)
+ SMLATB r9, r12, r10, r9 ; sum[3] = MAC16_16(sum[3],x_1,y_4)
+ LDRGT r12, [r4], #4 ; Load x[0...1]
+ SMLABB r6, r14, r11, r6 ; sum[0] = MAC16_16(sum[0],x_2,y_2)
+ SMLABT r7, r14, r11, r7 ; sum[1] = MAC16_16(sum[1],x_2,y_3)
+ SMLABB r8, r14, r10, r8 ; sum[2] = MAC16_16(sum[2],x_2,y_4)
+ SMLABT r9, r14, r10, r9 ; sum[3] = MAC16_16(sum[3],x_2,y_5)
+ SMLATT r6, r14, r11, r6 ; sum[0] = MAC16_16(sum[0],x_3,y_3)
+ LDR r11, [r5], #4 ; Load y[6...7]
+ SMLATB r7, r14, r10, r7 ; sum[1] = MAC16_16(sum[1],x_3,y_4)
+ SMLATT r8, r14, r10, r8 ; sum[2] = MAC16_16(sum[2],x_3,y_5)
+ SMLATB r9, r14, r11, r9 ; sum[3] = MAC16_16(sum[3],x_3,y_6)
+ BGT xcorr_kernel_edsp_process4
+xcorr_kernel_edsp_process4_done
+ ADDS r2, r2, #4
+ BLE xcorr_kernel_edsp_done
+ LDRH r12, [r4], #2 ; r12 = *x++
+ SUBS r2, r2, #1 ; j--
+ ; Stall
+ SMLABB r6, r12, r10, r6 ; sum[0] = MAC16_16(sum[0],x,y_0)
+ LDRGTH r14, [r4], #2 ; r14 = *x++
+ SMLABT r7, r12, r10, r7 ; sum[1] = MAC16_16(sum[1],x,y_1)
+ SMLABB r8, r12, r11, r8 ; sum[2] = MAC16_16(sum[2],x,y_2)
+ SMLABT r9, r12, r11, r9 ; sum[3] = MAC16_16(sum[3],x,y_3)
+ BLE xcorr_kernel_edsp_done
+ SMLABT r6, r14, r10, r6 ; sum[0] = MAC16_16(sum[0],x,y_1)
+ SUBS r2, r2, #1 ; j--
+ SMLABB r7, r14, r11, r7 ; sum[1] = MAC16_16(sum[1],x,y_2)
+ LDRH r10, [r5], #2 ; r10 = y_4 = *y++
+ SMLABT r8, r14, r11, r8 ; sum[2] = MAC16_16(sum[2],x,y_3)
+ LDRGTH r12, [r4], #2 ; r12 = *x++
+ SMLABB r9, r14, r10, r9 ; sum[3] = MAC16_16(sum[3],x,y_4)
+ BLE xcorr_kernel_edsp_done
+ SMLABB r6, r12, r11, r6 ; sum[0] = MAC16_16(sum[0],tmp,y_2)
+ CMP r2, #1 ; j--
+ SMLABT r7, r12, r11, r7 ; sum[1] = MAC16_16(sum[1],tmp,y_3)
+ LDRH r2, [r5], #2 ; r2 = y_5 = *y++
+ SMLABB r8, r12, r10, r8 ; sum[2] = MAC16_16(sum[2],tmp,y_4)
+ LDRGTH r14, [r4] ; r14 = *x
+ SMLABB r9, r12, r2, r9 ; sum[3] = MAC16_16(sum[3],tmp,y_5)
+ BLE xcorr_kernel_edsp_done
+ SMLABT r6, r14, r11, r6 ; sum[0] = MAC16_16(sum[0],tmp,y_3)
+ LDRH r11, [r5] ; r11 = y_6 = *y
+ SMLABB r7, r14, r10, r7 ; sum[1] = MAC16_16(sum[1],tmp,y_4)
+ SMLABB r8, r14, r2, r8 ; sum[2] = MAC16_16(sum[2],tmp,y_5)
+ SMLABB r9, r14, r11, r9 ; sum[3] = MAC16_16(sum[3],tmp,y_6)
+xcorr_kernel_edsp_done
+ LDMFD sp!, {r2,r4,r5,pc}
+ ENDP
+
+celt_pitch_xcorr_edsp PROC
+ ; input:
+ ; r0 = opus_val16 *_x (must be 32-bit aligned)
+ ; r1 = opus_val16 *_y (only needs to be 16-bit aligned)
+ ; r2 = opus_val32 *xcorr
+ ; r3 = int len
+ ; output:
+ ; r0 = maxcorr
+ ; internal usage
+ ; r4 = opus_val16 *x
+ ; r5 = opus_val16 *y
+ ; r6 = opus_val32 sum0
+ ; r7 = opus_val32 sum1
+ ; r8 = opus_val32 sum2
+ ; r9 = opus_val32 sum3
+ ; r1 = int max_pitch
+ ; r12 = int j
+ STMFD sp!, {r4-r11, lr}
+ MOV r5, r1
+ LDR r1, [sp, #36]
+ MOV r4, r0
+ TST r5, #3
+ ; maxcorr = 1
+ MOV r0, #1
+ BEQ celt_pitch_xcorr_edsp_process1u_done
+; Compute one sum at the start to make y 32-bit aligned.
+ SUBS r12, r3, #4
+ ; r14 = sum = 0
+ MOV r14, #0
+ LDRH r8, [r5], #2
+ BLE celt_pitch_xcorr_edsp_process1u_loop4_done
+ LDR r6, [r4], #4
+ MOV r8, r8, LSL #16
+celt_pitch_xcorr_edsp_process1u_loop4
+ LDR r9, [r5], #4
+ SMLABT r14, r6, r8, r14 ; sum = MAC16_16(sum, x_0, y_0)
+ LDR r7, [r4], #4
+ SMLATB r14, r6, r9, r14 ; sum = MAC16_16(sum, x_1, y_1)
+ LDR r8, [r5], #4
+ SMLABT r14, r7, r9, r14 ; sum = MAC16_16(sum, x_2, y_2)
+ SUBS r12, r12, #4 ; j-=4
+ SMLATB r14, r7, r8, r14 ; sum = MAC16_16(sum, x_3, y_3)
+ LDRGT r6, [r4], #4
+ BGT celt_pitch_xcorr_edsp_process1u_loop4
+ MOV r8, r8, LSR #16
+celt_pitch_xcorr_edsp_process1u_loop4_done
+ ADDS r12, r12, #4
+celt_pitch_xcorr_edsp_process1u_loop1
+ LDRGEH r6, [r4], #2
+ ; Stall
+ SMLABBGE r14, r6, r8, r14 ; sum = MAC16_16(sum, *x, *y)
+ SUBGES r12, r12, #1
+ LDRGTH r8, [r5], #2
+ BGT celt_pitch_xcorr_edsp_process1u_loop1
+ ; Restore _x
+ SUB r4, r4, r3, LSL #1
+ ; Restore and advance _y
+ SUB r5, r5, r3, LSL #1
+ ; maxcorr = max(maxcorr, sum)
+ CMP r0, r14
+ ADD r5, r5, #2
+ MOVLT r0, r14
+ SUBS r1, r1, #1
+ ; xcorr[i] = sum
+ STR r14, [r2], #4
+ BLE celt_pitch_xcorr_edsp_done
+celt_pitch_xcorr_edsp_process1u_done
+ ; if (max_pitch < 4) goto celt_pitch_xcorr_edsp_process2
+ SUBS r1, r1, #4
+ BLT celt_pitch_xcorr_edsp_process2
+celt_pitch_xcorr_edsp_process4
+ ; xcorr_kernel_edsp parameters:
+ ; r3 = len, r4 = _x, r5 = _y, r6...r9 = sum[4] = {0, 0, 0, 0}
+ MOV r6, #0
+ MOV r7, #0
+ MOV r8, #0
+ MOV r9, #0
+ BL xcorr_kernel_edsp ; xcorr_kernel_edsp(_x, _y+i, xcorr+i, len)
+ ; maxcorr = max(maxcorr, sum0, sum1, sum2, sum3)
+ CMP r0, r6
+ ; _y+=4
+ ADD r5, r5, #8
+ MOVLT r0, r6
+ CMP r0, r7
+ MOVLT r0, r7
+ CMP r0, r8
+ MOVLT r0, r8
+ CMP r0, r9
+ MOVLT r0, r9
+ STMIA r2!, {r6-r9}
+ SUBS r1, r1, #4
+ BGE celt_pitch_xcorr_edsp_process4
+celt_pitch_xcorr_edsp_process2
+ ADDS r1, r1, #2
+ BLT celt_pitch_xcorr_edsp_process1a
+ SUBS r12, r3, #4
+ ; {r10, r11} = {sum0, sum1} = {0, 0}
+ MOV r10, #0
+ MOV r11, #0
+ LDR r8, [r5], #4
+ BLE celt_pitch_xcorr_edsp_process2_loop_done
+ LDR r6, [r4], #4
+ LDR r9, [r5], #4
+celt_pitch_xcorr_edsp_process2_loop4
+ SMLABB r10, r6, r8, r10 ; sum0 = MAC16_16(sum0, x_0, y_0)
+ LDR r7, [r4], #4
+ SMLABT r11, r6, r8, r11 ; sum1 = MAC16_16(sum1, x_0, y_1)
+ SUBS r12, r12, #4 ; j-=4
+ SMLATT r10, r6, r8, r10 ; sum0 = MAC16_16(sum0, x_1, y_1)
+ LDR r8, [r5], #4
+ SMLATB r11, r6, r9, r11 ; sum1 = MAC16_16(sum1, x_1, y_2)
+ LDRGT r6, [r4], #4
+ SMLABB r10, r7, r9, r10 ; sum0 = MAC16_16(sum0, x_2, y_2)
+ SMLABT r11, r7, r9, r11 ; sum1 = MAC16_16(sum1, x_2, y_3)
+ SMLATT r10, r7, r9, r10 ; sum0 = MAC16_16(sum0, x_3, y_3)
+ LDRGT r9, [r5], #4
+ SMLATB r11, r7, r8, r11 ; sum1 = MAC16_16(sum1, x_3, y_4)
+ BGT celt_pitch_xcorr_edsp_process2_loop4
+celt_pitch_xcorr_edsp_process2_loop_done
+ ADDS r12, r12, #2
+ BLE celt_pitch_xcorr_edsp_process2_1
+ LDR r6, [r4], #4
+ ; Stall
+ SMLABB r10, r6, r8, r10 ; sum0 = MAC16_16(sum0, x_0, y_0)
+ LDR r9, [r5], #4
+ SMLABT r11, r6, r8, r11 ; sum1 = MAC16_16(sum1, x_0, y_1)
+ SUB r12, r12, #2
+ SMLATT r10, r6, r8, r10 ; sum0 = MAC16_16(sum0, x_1, y_1)
+ MOV r8, r9
+ SMLATB r11, r6, r9, r11 ; sum1 = MAC16_16(sum1, x_1, y_2)
+celt_pitch_xcorr_edsp_process2_1
+ LDRH r6, [r4], #2
+ ADDS r12, r12, #1
+ ; Stall
+ SMLABB r10, r6, r8, r10 ; sum0 = MAC16_16(sum0, x_0, y_0)
+ LDRGTH r7, [r4], #2
+ SMLABT r11, r6, r8, r11 ; sum1 = MAC16_16(sum1, x_0, y_1)
+ BLE celt_pitch_xcorr_edsp_process2_done
+ LDRH r9, [r5], #2
+ SMLABT r10, r7, r8, r10 ; sum0 = MAC16_16(sum0, x_0, y_1)
+ SMLABB r11, r7, r9, r11 ; sum1 = MAC16_16(sum1, x_0, y_2)
+celt_pitch_xcorr_edsp_process2_done
+ ; Restore _x
+ SUB r4, r4, r3, LSL #1
+ ; Restore and advance _y
+ SUB r5, r5, r3, LSL #1
+ ; maxcorr = max(maxcorr, sum0)
+ CMP r0, r10
+ ADD r5, r5, #2
+ MOVLT r0, r10
+ SUB r1, r1, #2
+ ; maxcorr = max(maxcorr, sum1)
+ CMP r0, r11
+ ; xcorr[i] = sum
+ STR r10, [r2], #4
+ MOVLT r0, r11
+ STR r11, [r2], #4
+celt_pitch_xcorr_edsp_process1a
+ ADDS r1, r1, #1
+ BLT celt_pitch_xcorr_edsp_done
+ SUBS r12, r3, #4
+ ; r14 = sum = 0
+ MOV r14, #0
+ BLT celt_pitch_xcorr_edsp_process1a_loop_done
+ LDR r6, [r4], #4
+ LDR r8, [r5], #4
+ LDR r7, [r4], #4
+ LDR r9, [r5], #4
+celt_pitch_xcorr_edsp_process1a_loop4
+ SMLABB r14, r6, r8, r14 ; sum = MAC16_16(sum, x_0, y_0)
+ SUBS r12, r12, #4 ; j-=4
+ SMLATT r14, r6, r8, r14 ; sum = MAC16_16(sum, x_1, y_1)
+ LDRGE r6, [r4], #4
+ SMLABB r14, r7, r9, r14 ; sum = MAC16_16(sum, x_2, y_2)
+ LDRGE r8, [r5], #4
+ SMLATT r14, r7, r9, r14 ; sum = MAC16_16(sum, x_3, y_3)
+ LDRGE r7, [r4], #4
+ LDRGE r9, [r5], #4
+ BGE celt_pitch_xcorr_edsp_process1a_loop4
+celt_pitch_xcorr_edsp_process1a_loop_done
+ ADDS r12, r12, #2
+ LDRGE r6, [r4], #4
+ LDRGE r8, [r5], #4
+ ; Stall
+ SMLABBGE r14, r6, r8, r14 ; sum = MAC16_16(sum, x_0, y_0)
+ SUBGE r12, r12, #2
+ SMLATTGE r14, r6, r8, r14 ; sum = MAC16_16(sum, x_1, y_1)
+ ADDS r12, r12, #1
+ LDRGEH r6, [r4], #2
+ LDRGEH r8, [r5], #2
+ ; Stall
+ SMLABBGE r14, r6, r8, r14 ; sum = MAC16_16(sum, *x, *y)
+ ; maxcorr = max(maxcorr, sum)
+ CMP r0, r14
+ ; xcorr[i] = sum
+ STR r14, [r2], #4
+ MOVLT r0, r14
+celt_pitch_xcorr_edsp_done
+ LDMFD sp!, {r4-r11, pc}
+ ENDP
+
+ENDIF
+
+END
diff --git a/celt/arm/fixed_armv4.h b/celt/arm/fixed_armv4.h
index bcacc34..b690bc8 100644
--- a/celt/arm/fixed_armv4.h
+++ b/celt/arm/fixed_armv4.h
@@ -29,7 +29,7 @@
/** 16x32 multiplication, followed by a 16-bit shift right. Results fits in 32 bits */
#undef MULT16_32_Q16
-static inline opus_val32 MULT16_32_Q16_armv4(opus_val16 a, opus_val32 b)
+static OPUS_INLINE opus_val32 MULT16_32_Q16_armv4(opus_val16 a, opus_val32 b)
{
unsigned rd_lo;
int rd_hi;
@@ -46,7 +46,7 @@
/** 16x32 multiplication, followed by a 15-bit shift right. Results fits in 32 bits */
#undef MULT16_32_Q15
-static inline opus_val32 MULT16_32_Q15_armv4(opus_val16 a, opus_val32 b)
+static OPUS_INLINE opus_val32 MULT16_32_Q15_armv4(opus_val16 a, opus_val32 b)
{
unsigned rd_lo;
int rd_hi;
diff --git a/celt/arm/fixed_armv5e.h b/celt/arm/fixed_armv5e.h
index 80632c4..1194a7d 100644
--- a/celt/arm/fixed_armv5e.h
+++ b/celt/arm/fixed_armv5e.h
@@ -34,7 +34,7 @@
/** 16x32 multiplication, followed by a 16-bit shift right. Results fits in 32 bits */
#undef MULT16_32_Q16
-static inline opus_val32 MULT16_32_Q16_armv5e(opus_val16 a, opus_val32 b)
+static OPUS_INLINE opus_val32 MULT16_32_Q16_armv5e(opus_val16 a, opus_val32 b)
{
int res;
__asm__(
@@ -50,7 +50,7 @@
/** 16x32 multiplication, followed by a 15-bit shift right. Results fits in 32 bits */
#undef MULT16_32_Q15
-static inline opus_val32 MULT16_32_Q15_armv5e(opus_val16 a, opus_val32 b)
+static OPUS_INLINE opus_val32 MULT16_32_Q15_armv5e(opus_val16 a, opus_val32 b)
{
int res;
__asm__(
@@ -68,7 +68,7 @@
b must fit in 31 bits.
Result fits in 32 bits. */
#undef MAC16_32_Q15
-static inline opus_val32 MAC16_32_Q15_armv5e(opus_val32 c, opus_val16 a,
+static OPUS_INLINE opus_val32 MAC16_32_Q15_armv5e(opus_val32 c, opus_val16 a,
opus_val32 b)
{
int res;
@@ -84,7 +84,7 @@
/** 16x16 multiply-add where the result fits in 32 bits */
#undef MAC16_16
-static inline opus_val32 MAC16_16_armv5e(opus_val32 c, opus_val16 a,
+static OPUS_INLINE opus_val32 MAC16_16_armv5e(opus_val32 c, opus_val16 a,
opus_val16 b)
{
int res;
@@ -100,7 +100,7 @@
/** 16x16 multiplication where the result fits in 32 bits */
#undef MULT16_16
-static inline opus_val32 MULT16_16_armv5e(opus_val16 a, opus_val16 b)
+static OPUS_INLINE opus_val32 MULT16_16_armv5e(opus_val16 a, opus_val16 b)
{
int res;
__asm__(
diff --git a/celt/arm/pitch_arm.h b/celt/arm/pitch_arm.h
new file mode 100644
index 0000000..a07f8ac
--- /dev/null
+++ b/celt/arm/pitch_arm.h
@@ -0,0 +1,57 @@
+/* Copyright (c) 2010 Xiph.Org Foundation
+ * Copyright (c) 2013 Parrot */
+/*
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+ OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#if !defined(PITCH_ARM_H)
+# define PITCH_ARM_H
+
+# include "armcpu.h"
+
+# if defined(FIXED_POINT)
+
+# if defined(OPUS_ARM_MAY_HAVE_NEON)
+opus_val32 celt_pitch_xcorr_neon(const opus_val16 *_x, const opus_val16 *_y,
+ opus_val32 *xcorr, int len, int max_pitch);
+# endif
+
+# if defined(OPUS_ARM_MAY_HAVE_MEDIA)
+# define celt_pitch_xcorr_media MAY_HAVE_EDSP(celt_pitch_xcorr)
+# endif
+
+# if defined(OPUS_ARM_MAY_HAVE_EDSP)
+opus_val32 celt_pitch_xcorr_edsp(const opus_val16 *_x, const opus_val16 *_y,
+ opus_val32 *xcorr, int len, int max_pitch);
+# endif
+
+# if !defined(OPUS_HAVE_RTCD)
+# define OVERRIDE_PITCH_XCORR (1)
+# define celt_pitch_xcorr(_x, _y, xcorr, len, max_pitch, arch) \
+ ((void)(arch),PRESUME_NEON(celt_pitch_xcorr)(_x, _y, xcorr, len, max_pitch))
+# endif
+
+# endif
+
+#endif
diff --git a/celt/bands.c b/celt/bands.c
index 93bd0bc..cce56e2 100644
--- a/celt/bands.c
+++ b/celt/bands.c
@@ -214,7 +214,9 @@
j=M*eBands[i];
band_end = M*eBands[i+1];
lg = ADD16(bandLogE[i+c*m->nbEBands], SHL16((opus_val16)eMeans[i],6));
-#ifdef FIXED_POINT
+#ifndef FIXED_POINT
+ g = celt_exp2(lg);
+#else
/* Handle the integer part of the log energy */
shift = 16-(lg>>DB_SHIFT);
if (shift>31)
@@ -225,9 +227,23 @@
/* Handle the fractional part. */
g = celt_exp2_frac(lg&((1<<DB_SHIFT)-1));
}
-#else
- g = celt_exp2(lg);
+ /* Handle extreme gains with negative shift. */
+ if (shift<0)
+ {
+ /* For shift < -2 we'd be likely to overflow, so we're capping
+ the gain here. This shouldn't happen unless the bitstream is
+ already corrupted. */
+ if (shift < -2)
+ {
+ g = 32767;
+ shift = -2;
+ }
+ do {
+ *f++ = SHL32(MULT16_16(*x++, g), -shift);
+ } while (++j<band_end);
+ } else
#endif
+ /* Be careful of the fixed-point "else" just above when changing this code */
do {
*f++ = SHR32(MULT16_16(*x++, g), shift);
} while (++j<band_end);
@@ -492,7 +508,7 @@
*tapset_decision=0;
}
/*printf("%d %d %d\n", hf_sum, *hf_average, *tapset_decision);*/
- celt_assert(nbBands>0); /*M*(eBands[end]-eBands[end-1]) <= 8 assures this*/
+ celt_assert(nbBands>0); /* end has to be non-zero */
sum /= nbBands;
/* Recursive averaging */
sum = (sum+*average)>>1;
@@ -869,7 +885,6 @@
int q;
int curr_bits;
int imid=0, iside=0;
- int N_B=N;
int B0=B;
opus_val16 mid=0, side=0;
unsigned cm=0;
@@ -891,8 +906,6 @@
spread = ctx->spread;
ec = ctx->ec;
- N_B /= B;
-
/* If we need 1.5 more bit than we can produce, split the band in two. */
cache = m->cache.bits + m->cache.index[(LM+1)*m->nbEBands+i];
if (LM != -1 && b > cache[cache[0]]+12 && N>2)
@@ -1072,7 +1085,6 @@
longBlocks = B0==1;
N_B /= B;
- N_B0 = N_B;
/* Special case for one sample */
if (N==1)
diff --git a/celt/celt.h b/celt/celt.h
index cdb76c8..5deea1f 100644
--- a/celt/celt.h
+++ b/celt/celt.h
@@ -66,6 +66,10 @@
/* Encoder/decoder Requests */
+/* Expose this option again when variable framesize actually works */
+#define OPUS_FRAMESIZE_VARIABLE 5010 /**< Optimize the frame size dynamically */
+
+
#define CELT_SET_PREDICTION_REQUEST 10002
/** Controls the use of interframe prediction.
0=Independent frames
@@ -118,7 +122,8 @@
int celt_encode_with_ec(OpusCustomEncoder * OPUS_RESTRICT st, const opus_val16 * pcm, int frame_size, unsigned char *compressed, int nbCompressedBytes, ec_enc *enc);
-int celt_encoder_init(CELTEncoder *st, opus_int32 sampling_rate, int channels);
+int celt_encoder_init(CELTEncoder *st, opus_int32 sampling_rate, int channels,
+ int arch);
@@ -138,7 +143,7 @@
#ifdef CUSTOM_MODES
#define OPUS_CUSTOM_NOSTATIC
#else
-#define OPUS_CUSTOM_NOSTATIC static inline
+#define OPUS_CUSTOM_NOSTATIC static OPUS_INLINE
#endif
static const unsigned char trim_icdf[11] = {126, 124, 119, 109, 87, 41, 19, 9, 4, 2, 0};
@@ -163,7 +168,7 @@
0x00, 0x08, 0x10, 0x18
};
-static inline int toOpus(unsigned char c)
+static OPUS_INLINE int toOpus(unsigned char c)
{
int ret=0;
if (c<0xA0)
@@ -174,7 +179,7 @@
return ret|(c&0x7);
}
-static inline int fromOpus(unsigned char c)
+static OPUS_INLINE int fromOpus(unsigned char c)
{
if (c<0x80)
return -1;
@@ -190,7 +195,7 @@
int resampling_factor(opus_int32 rate);
-void preemphasis(const opus_val16 * OPUS_RESTRICT pcmp, celt_sig * OPUS_RESTRICT inp,
+void celt_preemphasis(const opus_val16 * OPUS_RESTRICT pcmp, celt_sig * OPUS_RESTRICT inp,
int N, int CC, int upsample, const opus_val16 *coef, celt_sig *mem, int clip);
void comb_filter(opus_val32 *y, opus_val32 *x, int T0, int T1, int N,
diff --git a/celt/celt_decoder.c b/celt/celt_decoder.c
index 4424b97..830398e 100644
--- a/celt/celt_decoder.c
+++ b/celt/celt_decoder.c
@@ -175,7 +175,7 @@
}
#endif /* CUSTOM_MODES */
-static inline opus_val16 SIG2WORD16(celt_sig x)
+static OPUS_INLINE opus_val16 SIG2WORD16(celt_sig x)
{
#ifdef FIXED_POINT
x = PSHR32(x, SIG_SHIFT);
@@ -213,7 +213,7 @@
opus_val16 coef3 = coef[3];
for (j=0;j<N;j++)
{
- celt_sig tmp = x[j] + m;
+ celt_sig tmp = x[j] + m + VERY_SMALL;
m = MULT16_32_Q15(coef0, tmp)
- MULT16_32_Q15(coef1, x[j]);
tmp = SHL32(MULT16_32_Q15(coef3, tmp), 2);
@@ -227,7 +227,7 @@
/* Shortcut for the standard (non-custom modes) case */
for (j=0;j<N;j++)
{
- celt_sig tmp = x[j] + m;
+ celt_sig tmp = x[j] + m + VERY_SMALL;
m = MULT16_32_Q15(coef0, tmp);
scratch[j] = tmp;
}
@@ -447,10 +447,11 @@
{
VARDECL( opus_val16, lp_pitch_buf );
ALLOC( lp_pitch_buf, DECODE_BUFFER_SIZE>>1, opus_val16 );
- pitch_downsample(decode_mem, lp_pitch_buf, DECODE_BUFFER_SIZE, C);
+ pitch_downsample(decode_mem, lp_pitch_buf,
+ DECODE_BUFFER_SIZE, C, st->arch);
pitch_search(lp_pitch_buf+(PLC_PITCH_LAG_MAX>>1), lp_pitch_buf,
DECODE_BUFFER_SIZE-PLC_PITCH_LAG_MAX,
- PLC_PITCH_LAG_MAX-PLC_PITCH_LAG_MIN, &pitch_index);
+ PLC_PITCH_LAG_MAX-PLC_PITCH_LAG_MIN, &pitch_index, st->arch);
pitch_index = PLC_PITCH_LAG_MAX-pitch_index;
st->last_pitch_index = pitch_index;
} else {
@@ -481,7 +482,8 @@
opus_val32 ac[LPC_ORDER+1];
/* Compute LPC coefficients for the last MAX_PERIOD samples before
the first loss so we can work in the excitation-filter domain. */
- _celt_autocorr(exc, ac, window, overlap, LPC_ORDER, MAX_PERIOD);
+ _celt_autocorr(exc, ac, window, overlap,
+ LPC_ORDER, MAX_PERIOD, st->arch);
/* Add a noise floor of -40 dB. */
#ifdef FIXED_POINT
ac[0] += SHR32(ac[0],13);
@@ -665,7 +667,6 @@
VARDECL(int, fine_priority);
VARDECL(int, tf_res);
VARDECL(unsigned char, collapse_masks);
- celt_sig *out_mem[2];
celt_sig *decode_mem[2];
celt_sig *out_syn[2];
opus_val16 *lpc;
@@ -706,7 +707,6 @@
c=0; do {
decode_mem[c] = st->_decode_mem + c*(DECODE_BUFFER_SIZE+overlap);
- out_mem[c] = decode_mem[c]+DECODE_BUFFER_SIZE-MAX_PERIOD;
} while (++c<CC);
lpc = (opus_val16*)(st->_decode_mem+(DECODE_BUFFER_SIZE+overlap)*CC);
oldBandE = lpc+CC*LPC_ORDER;
@@ -936,7 +936,7 @@
} while (++c<C);
c=0; do {
- out_syn[c] = out_mem[c]+MAX_PERIOD-N;
+ out_syn[c] = decode_mem[c]+DECODE_BUFFER_SIZE-N;
} while (++c<CC);
if (CC==2&&C==1)
diff --git a/celt/celt_encoder.c b/celt/celt_encoder.c
index 59dcc5c..ffff077 100644
--- a/celt/celt_encoder.c
+++ b/celt/celt_encoder.c
@@ -161,17 +161,8 @@
}
#endif /* CUSTOM_MODES */
-int celt_encoder_init(CELTEncoder *st, opus_int32 sampling_rate, int channels)
-{
- int ret;
- ret = opus_custom_encoder_init(st, opus_custom_mode_create(48000, 960, NULL), channels);
- if (ret != OPUS_OK)
- return ret;
- st->upsample = resampling_factor(sampling_rate);
- return OPUS_OK;
-}
-
-OPUS_CUSTOM_NOSTATIC int opus_custom_encoder_init(CELTEncoder *st, const CELTMode *mode, int channels)
+static int opus_custom_encoder_init_arch(CELTEncoder *st, const CELTMode *mode,
+ int channels, int arch)
{
if (channels < 0 || channels > 2)
return OPUS_BAD_ARG;
@@ -190,7 +181,7 @@
st->end = st->mode->effEBands;
st->signalling = 1;
- st->arch = opus_select_arch();
+ st->arch = arch;
st->constrained_vbr = 1;
st->clip = 1;
@@ -207,6 +198,25 @@
}
#ifdef CUSTOM_MODES
+int opus_custom_encoder_init(CELTEncoder *st, const CELTMode *mode, int channels)
+{
+ return opus_custom_encoder_init_arch(st, mode, channels, opus_select_arch());
+}
+#endif
+
+int celt_encoder_init(CELTEncoder *st, opus_int32 sampling_rate, int channels,
+ int arch)
+{
+ int ret;
+ ret = opus_custom_encoder_init_arch(st,
+ opus_custom_mode_create(48000, 960, NULL), channels, arch);
+ if (ret != OPUS_OK)
+ return ret;
+ st->upsample = resampling_factor(sampling_rate);
+ return OPUS_OK;
+}
+
+#ifdef CUSTOM_MODES
void opus_custom_encoder_destroy(CELTEncoder *st)
{
opus_free(st);
@@ -240,7 +250,6 @@
ALLOC(tmp, len, opus_val16);
len2=len/2;
- tf_max = 0;
for (c=0;c<C;c++)
{
opus_val32 mean;
@@ -451,7 +460,7 @@
}
-void preemphasis(const opus_val16 * OPUS_RESTRICT pcmp, celt_sig * OPUS_RESTRICT inp,
+void celt_preemphasis(const opus_val16 * OPUS_RESTRICT pcmp, celt_sig * OPUS_RESTRICT inp,
int N, int CC, int upsample, const opus_val16 *coef, celt_sig *mem, int clip)
{
int i;
@@ -488,6 +497,8 @@
for (i=0;i<Nu;i++)
inp[i*upsample] = MAX32(-65536.f, MIN32(65536.f,inp[i*upsample]));
}
+#else
+ (void)clip; /* Avoids a warning about clip being unused. */
#endif
m = *mem;
#ifdef CUSTOM_MODES
@@ -497,7 +508,7 @@
opus_val16 coef2 = coef[2];
for (i=0;i<N;i++)
{
- opus_val16 x, tmp;
+ celt_sig x, tmp;
x = inp[i];
/* Apply pre-emphasis */
tmp = MULT16_16(coef2, x);
@@ -822,7 +833,8 @@
#ifndef DISABLE_FLOAT_API
if (analysis->valid)
{
- trim -= MAX16(-QCONST16(2.f, 8), MIN16(QCONST16(2.f, 8), QCONST16(2.f, 8)*(analysis->tonality_slope+.05f)));
+ trim -= MAX16(-QCONST16(2.f, 8), MIN16(QCONST16(2.f, 8),
+ (opus_val16)(QCONST16(2.f, 8)*(analysis->tonality_slope+.05f))));
}
#endif
@@ -1023,11 +1035,12 @@
VARDECL(opus_val16, pitch_buf);
ALLOC(pitch_buf, (COMBFILTER_MAXPERIOD+N)>>1, opus_val16);
- pitch_downsample(pre, pitch_buf, COMBFILTER_MAXPERIOD+N, CC);
+ pitch_downsample(pre, pitch_buf, COMBFILTER_MAXPERIOD+N, CC, st->arch);
/* Don't search for the fir last 1.5 octave of the range because
there's too many false-positives due to short-term correlation */
pitch_search(pitch_buf+(COMBFILTER_MAXPERIOD>>1), pitch_buf, N,
- COMBFILTER_MAXPERIOD-3*COMBFILTER_MINPERIOD, &pitch_index);
+ COMBFILTER_MAXPERIOD-3*COMBFILTER_MINPERIOD, &pitch_index,
+ st->arch);
pitch_index = COMBFILTER_MAXPERIOD-pitch_index;
gain1 = remove_doubling(pitch_buf, COMBFILTER_MAXPERIOD, COMBFILTER_MINPERIOD,
@@ -1156,6 +1169,7 @@
coded_stereo_dof = (eBands[coded_stereo_bands]<<LM)-coded_stereo_bands;
/* Maximum fraction of the bits we can save if the signal is mono. */
max_frac = DIV32_16(MULT16_16(QCONST16(0.8f, 15), coded_stereo_dof), coded_bins);
+ stereo_saving = MIN16(stereo_saving, QCONST16(1.f, 8));
/*printf("%d %d %d ", coded_stereo_dof, coded_bins, tot_boost);*/
target -= (opus_int32)MIN32(MULT16_32_Q15(max_frac,target),
SHR32(MULT16_16(stereo_saving-QCONST16(0.1f,8),(coded_stereo_dof<<BITRES)),8));
@@ -1294,6 +1308,7 @@
opus_val16 surround_masking=0;
opus_val16 temporal_vbr=0;
opus_val16 surround_trim = 0;
+ opus_int32 equiv_rate = 510000;
VARDECL(opus_val16, surround_dynalloc);
ALLOC_STACK;
@@ -1303,14 +1318,20 @@
eBands = mode->eBands;
tf_estimate = 0;
if (nbCompressedBytes<2 || pcm==NULL)
- return OPUS_BAD_ARG;
+ {
+ RESTORE_STACK;
+ return OPUS_BAD_ARG;
+ }
frame_size *= st->upsample;
for (LM=0;LM<=mode->maxLM;LM++)
if (mode->shortMdctSize<<LM==frame_size)
break;
if (LM>mode->maxLM)
+ {
+ RESTORE_STACK;
return OPUS_BAD_ARG;
+ }
M=1<<LM;
N = M*mode->shortMdctSize;
@@ -1341,7 +1362,10 @@
{
int c0 = toOpus(compressed[0]);
if (c0<0)
+ {
+ RESTORE_STACK;
return OPUS_BAD_ARG;
+ }
compressed[0] = c0;
}
compressed++;
@@ -1375,6 +1399,8 @@
(tmp+4*mode->Fs)/(8*mode->Fs)-!!st->signalling));
effectiveBytes = nbCompressedBytes;
}
+ if (st->bitrate != OPUS_BITRATE_MAX)
+ equiv_rate = st->bitrate - (40*C+20)*((400>>LM) - 50);
if (enc==NULL)
{
@@ -1448,7 +1474,7 @@
enc->nbits_total+=tell-ec_tell(enc);
}
c=0; do {
- preemphasis(pcm+c, in+c*(N+st->overlap)+st->overlap, N, CC, st->upsample,
+ celt_preemphasis(pcm+c, in+c*(N+st->overlap)+st->overlap, N, CC, st->upsample,
mode->preemph, st->preemph_memE+c, st->clip);
} while (++c<CC);
@@ -1458,7 +1484,7 @@
{
int enabled;
int qg;
- enabled = (st->lfe || nbAvailableBytes>12*C) && st->start==0 && !silence && !st->disable_pf
+ enabled = ((st->lfe&&nbAvailableBytes>3) || nbAvailableBytes>12*C) && st->start==0 && !silence && !st->disable_pf
&& st->complexity >= 5 && !(st->consec_transient && LM!=3 && st->variable_duration==OPUS_FRAMESIZE_VARIABLE);
prefilter_tapset = st->tapset_decision;
@@ -1612,7 +1638,7 @@
if (!st->lfe)
{
opus_val16 follow=-QCONST16(10.0f,DB_SHIFT);
- float frame_avg=0;
+ opus_val32 frame_avg=0;
opus_val16 offset = shortBlocks?HALF16(SHL16(LM, DB_SHIFT)):0;
for(i=st->start;i<st->end;i++)
{
@@ -1710,7 +1736,8 @@
/* Disable new spreading+tapset estimator until we can show it works
better than the old one. So far it seems like spreading_decision()
works best. */
- if (0&&st->analysis.valid)
+#if 0
+ if (st->analysis.valid)
{
static const opus_val16 spread_thresholds[3] = {-QCONST16(.6f, 15), -QCONST16(.2f, 15), -QCONST16(.07f, 15)};
static const opus_val16 spread_histeresis[3] = {QCONST16(.15f, 15), QCONST16(.07f, 15), QCONST16(.02f, 15)};
@@ -1718,7 +1745,9 @@
static const opus_val16 tapset_histeresis[2] = {QCONST16(.1f, 15), QCONST16(.05f, 15)};
st->spread_decision = hysteresis_decision(-st->analysis.tonality, spread_thresholds, spread_histeresis, 3, st->spread_decision);
st->tapset_decision = hysteresis_decision(st->analysis.tonality_slope, tapset_thresholds, tapset_histeresis, 2, st->tapset_decision);
- } else {
+ } else
+#endif
+ {
st->spread_decision = spreading_decision(mode, X,
&st->tonal_average, st->spread_decision, &st->hf_average,
&st->tapset_decision, pf_on&&!shortBlocks, effEnd, C, M);
@@ -1777,25 +1806,18 @@
if (C==2)
{
- int effectiveRate;
-
static const opus_val16 intensity_thresholds[21]=
/* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 off*/
- { 16,21,23,25,27,29,31,33,35,38,42,46,50,54,58,63,68,75,84,102,130};
+ { 1, 2, 3, 4, 5, 6, 7, 8,16,24,36,44,50,56,62,67,72,79,88,106,134};
static const opus_val16 intensity_histeresis[21]=
- { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 4, 5, 6, 8, 12};
+ { 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 3, 3, 4, 5, 6, 8, 8};
/* Always use MS for 2.5 ms frames until we can do a better analysis */
if (LM!=0)
dual_stereo = stereo_analysis(mode, X, LM, N);
- /* Account for coarse energy */
- effectiveRate = (8*effectiveBytes - 80)>>LM;
-
- /* effectiveRate in kb/s */
- effectiveRate = 2*effectiveRate/5;
-
- st->intensity = hysteresis_decision((opus_val16)effectiveRate, intensity_thresholds, intensity_histeresis, 21, st->intensity);
+ st->intensity = hysteresis_decision((opus_val16)(equiv_rate/1000),
+ intensity_thresholds, intensity_histeresis, 21, st->intensity);
st->intensity = IMIN(st->end,IMAX(st->start, st->intensity));
}
@@ -1829,7 +1851,7 @@
if (st->constrained_vbr)
base_target += (st->vbr_offset>>lm_diff);
- target = compute_vbr(mode, &st->analysis, base_target, LM, st->bitrate,
+ target = compute_vbr(mode, &st->analysis, base_target, LM, equiv_rate,
st->lastCodedBands, C, st->intensity, st->constrained_vbr,
st->stereo_saving, tot_boost, tf_estimate, pitch_change, maxDepth,
st->variable_duration, st->lfe, st->energy_mask!=NULL, surround_masking,
@@ -1913,13 +1935,13 @@
if (st->analysis.valid)
{
int min_bandwidth;
- if (st->bitrate < (opus_int32)32000*C)
+ if (equiv_rate < (opus_int32)32000*C)
min_bandwidth = 13;
- else if (st->bitrate < (opus_int32)48000*C)
+ else if (equiv_rate < (opus_int32)48000*C)
min_bandwidth = 16;
- else if (st->bitrate < (opus_int32)60000*C)
+ else if (equiv_rate < (opus_int32)60000*C)
min_bandwidth = 18;
- else if (st->bitrate < (opus_int32)80000*C)
+ else if (equiv_rate < (opus_int32)80000*C)
min_bandwidth = 19;
else
min_bandwidth = 20;
diff --git a/celt/celt_lpc.c b/celt/celt_lpc.c
index 7ffe90a..fa29d62 100644
--- a/celt/celt_lpc.c
+++ b/celt/celt_lpc.c
@@ -226,7 +226,8 @@
const opus_val16 *window,
int overlap,
int lag,
- int n
+ int n,
+ int arch
)
{
opus_val32 d;
@@ -275,7 +276,7 @@
shift = 0;
}
#endif
- celt_pitch_xcorr(xptr, xptr, ac, fastN, lag+1);
+ celt_pitch_xcorr(xptr, xptr, ac, fastN, lag+1, arch);
for (k=0;k<=lag;k++)
{
for (i = k+fastN, d = 0; i < n; i++)
diff --git a/celt/celt_lpc.h b/celt/celt_lpc.h
index 19279a0..dc2a0a3 100644
--- a/celt/celt_lpc.h
+++ b/celt/celt_lpc.h
@@ -48,6 +48,7 @@
int ord,
opus_val16 *mem);
-int _celt_autocorr(const opus_val16 *x, opus_val32 *ac, const opus_val16 *window, int overlap, int lag, int n);
+int _celt_autocorr(const opus_val16 *x, opus_val32 *ac,
+ const opus_val16 *window, int overlap, int lag, int n, int arch);
#endif /* PLC_H */
diff --git a/celt/cpu_support.h b/celt/cpu_support.h
index 41481fe..d68dbe6 100644
--- a/celt/cpu_support.h
+++ b/celt/cpu_support.h
@@ -28,7 +28,10 @@
#ifndef CPU_SUPPORT_H
#define CPU_SUPPORT_H
-#if defined(OPUS_HAVE_RTCD) && defined(ARMv4_ASM)
+#include "opus_types.h"
+#include "opus_defines.h"
+
+#if defined(OPUS_HAVE_RTCD) && defined(OPUS_ARM_ASM)
#include "arm/armcpu.h"
/* We currently support 4 ARM variants:
@@ -42,7 +45,7 @@
#else
#define OPUS_ARCHMASK 0
-static inline int opus_select_arch(void)
+static OPUS_INLINE int opus_select_arch(void)
{
return 0;
}
diff --git a/celt/cwrs.c b/celt/cwrs.c
index 28e6561..ad980cc 100644
--- a/celt/cwrs.c
+++ b/celt/cwrs.c
@@ -410,7 +410,7 @@
};
#if defined(CUSTOM_MODES)
-const opus_uint32 *const CELT_PVQ_U_ROW[15]={
+static const opus_uint32 *const CELT_PVQ_U_ROW[15]={
CELT_PVQ_U_DATA+ 0,CELT_PVQ_U_DATA+ 208,CELT_PVQ_U_DATA+ 415,
CELT_PVQ_U_DATA+ 621,CELT_PVQ_U_DATA+ 826,CELT_PVQ_U_DATA+1030,
CELT_PVQ_U_DATA+1233,CELT_PVQ_U_DATA+1336,CELT_PVQ_U_DATA+1389,
@@ -418,7 +418,7 @@
CELT_PVQ_U_DATA+1464,CELT_PVQ_U_DATA+1470,CELT_PVQ_U_DATA+1473
};
#else
-const opus_uint32 *const CELT_PVQ_U_ROW[15]={
+static const opus_uint32 *const CELT_PVQ_U_ROW[15]={
CELT_PVQ_U_DATA+ 0,CELT_PVQ_U_DATA+ 176,CELT_PVQ_U_DATA+ 351,
CELT_PVQ_U_DATA+ 525,CELT_PVQ_U_DATA+ 698,CELT_PVQ_U_DATA+ 870,
CELT_PVQ_U_DATA+1041,CELT_PVQ_U_DATA+1131,CELT_PVQ_U_DATA+1178,
@@ -534,7 +534,7 @@
/*Computes the next row/column of any recurrence that obeys the relation
u[i][j]=u[i-1][j]+u[i][j-1]+u[i-1][j-1].
_ui0 is the base case for the new row/column.*/
-static inline void unext(opus_uint32 *_ui,unsigned _len,opus_uint32 _ui0){
+static OPUS_INLINE void unext(opus_uint32 *_ui,unsigned _len,opus_uint32 _ui0){
opus_uint32 ui1;
unsigned j;
/*This do-while will overrun the array if we don't have storage for at least
@@ -550,7 +550,7 @@
/*Computes the previous row/column of any recurrence that obeys the relation
u[i-1][j]=u[i][j]-u[i][j-1]-u[i-1][j-1].
_ui0 is the base case for the new row/column.*/
-static inline void uprev(opus_uint32 *_ui,unsigned _n,opus_uint32 _ui0){
+static OPUS_INLINE void uprev(opus_uint32 *_ui,unsigned _n,opus_uint32 _ui0){
opus_uint32 ui1;
unsigned j;
/*This do-while will overrun the array if we don't have storage for at least
@@ -617,7 +617,7 @@
of size 1 with associated sign bits.
_y: The vector of pulses, whose sum of absolute values is K.
_k: Returns K.*/
-static inline opus_uint32 icwrs1(const int *_y,int *_k){
+static OPUS_INLINE opus_uint32 icwrs1(const int *_y,int *_k){
*_k=abs(_y[0]);
return _y[0]<0;
}
@@ -626,7 +626,7 @@
of size _n with associated sign bits.
_y: The vector of pulses, whose sum of absolute values must be _k.
_nc: Returns V(_n,_k).*/
-static inline opus_uint32 icwrs(int _n,int _k,opus_uint32 *_nc,const int *_y,
+static OPUS_INLINE opus_uint32 icwrs(int _n,int _k,opus_uint32 *_nc,const int *_y,
opus_uint32 *_u){
opus_uint32 i;
int j;
diff --git a/celt/ecintrin.h b/celt/ecintrin.h
index be57dd4..2263cff 100644
--- a/celt/ecintrin.h
+++ b/celt/ecintrin.h
@@ -33,7 +33,7 @@
#if !defined(_ecintrin_H)
# define _ecintrin_H (1)
-/*Some specific platforms may have optimized intrinsic or inline assembly
+/*Some specific platforms may have optimized intrinsic or OPUS_INLINE assembly
versions of these functions which can substantially improve performance.
We define macros for them to allow easy incorporation of these non-ANSI
features.*/
diff --git a/celt/entcode.h b/celt/entcode.h
index aebecc0..dd13e49 100644
--- a/celt/entcode.h
+++ b/celt/entcode.h
@@ -26,6 +26,7 @@
*/
#include "opus_types.h"
+#include "opus_defines.h"
#if !defined(_entcode_H)
# define _entcode_H (1)
@@ -83,15 +84,15 @@
int error;
};
-static inline opus_uint32 ec_range_bytes(ec_ctx *_this){
+static OPUS_INLINE opus_uint32 ec_range_bytes(ec_ctx *_this){
return _this->offs;
}
-static inline unsigned char *ec_get_buffer(ec_ctx *_this){
+static OPUS_INLINE unsigned char *ec_get_buffer(ec_ctx *_this){
return _this->buf;
}
-static inline int ec_get_error(ec_ctx *_this){
+static OPUS_INLINE int ec_get_error(ec_ctx *_this){
return _this->error;
}
@@ -101,7 +102,7 @@
Return: The number of bits.
This will always be slightly larger than the exact value (e.g., all
rounding error is in the positive direction).*/
-static inline int ec_tell(ec_ctx *_this){
+static OPUS_INLINE int ec_tell(ec_ctx *_this){
return _this->nbits_total-EC_ILOG(_this->rng);
}
diff --git a/celt/fixed_debug.h b/celt/fixed_debug.h
index f11d890..80bc949 100644
--- a/celt/fixed_debug.h
+++ b/celt/fixed_debug.h
@@ -33,9 +33,9 @@
#define FIXED_DEBUG_H
#include <stdio.h>
+#include "opus_defines.h"
#ifdef CELT_C
-#include "opus_defines.h"
OPUS_EXPORT opus_int64 celt_mips=0;
#else
extern opus_int64 celt_mips;
@@ -59,7 +59,7 @@
#define SHR(a,b) SHR32(a,b)
#define PSHR(a,b) PSHR32(a,b)
-static inline short NEG16(int x)
+static OPUS_INLINE short NEG16(int x)
{
int res;
if (!VERIFY_SHORT(x))
@@ -80,7 +80,7 @@
celt_mips++;
return res;
}
-static inline int NEG32(opus_int64 x)
+static OPUS_INLINE int NEG32(opus_int64 x)
{
opus_int64 res;
if (!VERIFY_INT(x))
@@ -103,7 +103,7 @@
}
#define EXTRACT16(x) EXTRACT16_(x, __FILE__, __LINE__)
-static inline short EXTRACT16_(int x, char *file, int line)
+static OPUS_INLINE short EXTRACT16_(int x, char *file, int line)
{
int res;
if (!VERIFY_SHORT(x))
@@ -119,7 +119,7 @@
}
#define EXTEND32(x) EXTEND32_(x, __FILE__, __LINE__)
-static inline int EXTEND32_(int x, char *file, int line)
+static OPUS_INLINE int EXTEND32_(int x, char *file, int line)
{
int res;
if (!VERIFY_SHORT(x))
@@ -135,7 +135,7 @@
}
#define SHR16(a, shift) SHR16_(a, shift, __FILE__, __LINE__)
-static inline short SHR16_(int a, int shift, char *file, int line)
+static OPUS_INLINE short SHR16_(int a, int shift, char *file, int line)
{
int res;
if (!VERIFY_SHORT(a) || !VERIFY_SHORT(shift))
@@ -157,7 +157,7 @@
return res;
}
#define SHL16(a, shift) SHL16_(a, shift, __FILE__, __LINE__)
-static inline short SHL16_(int a, int shift, char *file, int line)
+static OPUS_INLINE short SHL16_(int a, int shift, char *file, int line)
{
int res;
if (!VERIFY_SHORT(a) || !VERIFY_SHORT(shift))
@@ -179,7 +179,7 @@
return res;
}
-static inline int SHR32(opus_int64 a, int shift)
+static OPUS_INLINE int SHR32(opus_int64 a, int shift)
{
opus_int64 res;
if (!VERIFY_INT(a) || !VERIFY_SHORT(shift))
@@ -201,7 +201,7 @@
return res;
}
#define SHL32(a, shift) SHL32_(a, shift, __FILE__, __LINE__)
-static inline int SHL32_(opus_int64 a, int shift, char *file, int line)
+static OPUS_INLINE int SHL32_(opus_int64 a, int shift, char *file, int line)
{
opus_int64 res;
if (!VERIFY_INT(a) || !VERIFY_SHORT(shift))
@@ -234,7 +234,7 @@
//#define SHL(a,shift) ((a) << (shift))
#define ADD16(a, b) ADD16_(a, b, __FILE__, __LINE__)
-static inline short ADD16_(int a, int b, char *file, int line)
+static OPUS_INLINE short ADD16_(int a, int b, char *file, int line)
{
int res;
if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
@@ -257,7 +257,7 @@
}
#define SUB16(a, b) SUB16_(a, b, __FILE__, __LINE__)
-static inline short SUB16_(int a, int b, char *file, int line)
+static OPUS_INLINE short SUB16_(int a, int b, char *file, int line)
{
int res;
if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
@@ -280,7 +280,7 @@
}
#define ADD32(a, b) ADD32_(a, b, __FILE__, __LINE__)
-static inline int ADD32_(opus_int64 a, opus_int64 b, char *file, int line)
+static OPUS_INLINE int ADD32_(opus_int64 a, opus_int64 b, char *file, int line)
{
opus_int64 res;
if (!VERIFY_INT(a) || !VERIFY_INT(b))
@@ -303,7 +303,7 @@
}
#define SUB32(a, b) SUB32_(a, b, __FILE__, __LINE__)
-static inline int SUB32_(opus_int64 a, opus_int64 b, char *file, int line)
+static OPUS_INLINE int SUB32_(opus_int64 a, opus_int64 b, char *file, int line)
{
opus_int64 res;
if (!VERIFY_INT(a) || !VERIFY_INT(b))
@@ -327,7 +327,7 @@
#undef UADD32
#define UADD32(a, b) UADD32_(a, b, __FILE__, __LINE__)
-static inline unsigned int UADD32_(opus_uint64 a, opus_uint64 b, char *file, int line)
+static OPUS_INLINE unsigned int UADD32_(opus_uint64 a, opus_uint64 b, char *file, int line)
{
opus_uint64 res;
if (!VERIFY_UINT(a) || !VERIFY_UINT(b))
@@ -351,7 +351,7 @@
#undef USUB32
#define USUB32(a, b) USUB32_(a, b, __FILE__, __LINE__)
-static inline unsigned int USUB32_(opus_uint64 a, opus_uint64 b, char *file, int line)
+static OPUS_INLINE unsigned int USUB32_(opus_uint64 a, opus_uint64 b, char *file, int line)
{
opus_uint64 res;
if (!VERIFY_UINT(a) || !VERIFY_UINT(b))
@@ -381,7 +381,7 @@
}
/* result fits in 16 bits */
-static inline short MULT16_16_16(int a, int b)
+static OPUS_INLINE short MULT16_16_16(int a, int b)
{
int res;
if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
@@ -404,7 +404,7 @@
}
#define MULT16_16(a, b) MULT16_16_(a, b, __FILE__, __LINE__)
-static inline int MULT16_16_(int a, int b, char *file, int line)
+static OPUS_INLINE int MULT16_16_(int a, int b, char *file, int line)
{
opus_int64 res;
if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
@@ -429,7 +429,7 @@
#define MAC16_16(c,a,b) (celt_mips-=2,ADD32((c),MULT16_16((a),(b))))
#define MULT16_32_QX(a, b, Q) MULT16_32_QX_(a, b, Q, __FILE__, __LINE__)
-static inline int MULT16_32_QX_(int a, opus_int64 b, int Q, char *file, int line)
+static OPUS_INLINE int MULT16_32_QX_(int a, opus_int64 b, int Q, char *file, int line)
{
opus_int64 res;
if (!VERIFY_SHORT(a) || !VERIFY_INT(b))
@@ -462,7 +462,7 @@
}
#define MULT16_32_PX(a, b, Q) MULT16_32_PX_(a, b, Q, __FILE__, __LINE__)
-static inline int MULT16_32_PX_(int a, opus_int64 b, int Q, char *file, int line)
+static OPUS_INLINE int MULT16_32_PX_(int a, opus_int64 b, int Q, char *file, int line)
{
opus_int64 res;
if (!VERIFY_SHORT(a) || !VERIFY_INT(b))
@@ -497,7 +497,7 @@
#define MULT16_32_Q15(a,b) MULT16_32_QX(a,b,15)
#define MAC16_32_Q15(c,a,b) (celt_mips-=2,ADD32((c),MULT16_32_Q15((a),(b))))
-static inline int SATURATE(int a, int b)
+static OPUS_INLINE int SATURATE(int a, int b)
{
if (a>b)
a=b;
@@ -507,7 +507,17 @@
return a;
}
-static inline int MULT16_16_Q11_32(int a, int b)
+static OPUS_INLINE opus_int16 SATURATE16(opus_int32 a)
+{
+ celt_mips+=3;
+ if (a>32767)
+ return 32767;
+ else if (a<-32768)
+ return -32768;
+ else return a;
+}
+
+static OPUS_INLINE int MULT16_16_Q11_32(int a, int b)
{
opus_int64 res;
if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
@@ -529,7 +539,7 @@
celt_mips+=3;
return res;
}
-static inline short MULT16_16_Q13(int a, int b)
+static OPUS_INLINE short MULT16_16_Q13(int a, int b)
{
opus_int64 res;
if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
@@ -551,7 +561,7 @@
celt_mips+=3;
return res;
}
-static inline short MULT16_16_Q14(int a, int b)
+static OPUS_INLINE short MULT16_16_Q14(int a, int b)
{
opus_int64 res;
if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
@@ -575,7 +585,7 @@
}
#define MULT16_16_Q15(a, b) MULT16_16_Q15_(a, b, __FILE__, __LINE__)
-static inline short MULT16_16_Q15_(int a, int b, char *file, int line)
+static OPUS_INLINE short MULT16_16_Q15_(int a, int b, char *file, int line)
{
opus_int64 res;
if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
@@ -598,7 +608,7 @@
return res;
}
-static inline short MULT16_16_P13(int a, int b)
+static OPUS_INLINE short MULT16_16_P13(int a, int b)
{
opus_int64 res;
if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
@@ -628,7 +638,7 @@
celt_mips+=4;
return res;
}
-static inline short MULT16_16_P14(int a, int b)
+static OPUS_INLINE short MULT16_16_P14(int a, int b)
{
opus_int64 res;
if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
@@ -658,7 +668,7 @@
celt_mips+=4;
return res;
}
-static inline short MULT16_16_P15(int a, int b)
+static OPUS_INLINE short MULT16_16_P15(int a, int b)
{
opus_int64 res;
if (!VERIFY_SHORT(a) || !VERIFY_SHORT(b))
@@ -691,7 +701,7 @@
#define DIV32_16(a, b) DIV32_16_(a, b, __FILE__, __LINE__)
-static inline int DIV32_16_(opus_int64 a, opus_int64 b, char *file, int line)
+static OPUS_INLINE int DIV32_16_(opus_int64 a, opus_int64 b, char *file, int line)
{
opus_int64 res;
if (b==0)
@@ -726,7 +736,7 @@
}
#define DIV32(a, b) DIV32_(a, b, __FILE__, __LINE__)
-static inline int DIV32_(opus_int64 a, opus_int64 b, char *file, int line)
+static OPUS_INLINE int DIV32_(opus_int64 a, opus_int64 b, char *file, int line)
{
opus_int64 res;
if (b==0)
diff --git a/celt/fixed_generic.h b/celt/fixed_generic.h
index 657e67c..ecf018a 100644
--- a/celt/fixed_generic.h
+++ b/celt/fixed_generic.h
@@ -40,7 +40,7 @@
#define MULT16_32_Q16(a,b) ADD32(MULT16_16((a),SHR((b),16)), SHR(MULT16_16SU((a),((b)&0x0000ffff)),16))
/** 16x32 multiplication, followed by a 16-bit shift right (round-to-nearest). Results fits in 32 bits */
-#define MULT16_32_P16(a,b) ADD32(MULT16_16((a),SHR((b),16)), PSHR(MULT16_16((a),((b)&0x0000ffff)),16))
+#define MULT16_32_P16(a,b) ADD32(MULT16_16((a),SHR((b),16)), PSHR(MULT16_16SU((a),((b)&0x0000ffff)),16))
/** 16x32 multiplication, followed by a 15-bit shift right. Results fits in 32 bits */
#define MULT16_32_Q15(a,b) ADD32(SHL(MULT16_16((a),SHR((b),16)),1), SHR(MULT16_16SU((a),((b)&0x0000ffff)),15))
diff --git a/celt/float_cast.h b/celt/float_cast.h
index 5ded291..ede6574 100644
--- a/celt/float_cast.h
+++ b/celt/float_cast.h
@@ -101,7 +101,7 @@
#include <math.h>
/* Win32 doesn't seem to have these functions.
- ** Therefore implement inline versions of these functions here.
+ ** Therefore implement OPUS_INLINE versions of these functions here.
*/
__inline long int
@@ -128,7 +128,7 @@
#endif
#ifndef DISABLE_FLOAT_API
-static inline opus_int16 FLOAT2INT16(float x)
+static OPUS_INLINE opus_int16 FLOAT2INT16(float x)
{
x = x*CELT_SIG_SCALE;
x = MAX32(x, -32768);
diff --git a/celt/mathops.c b/celt/mathops.c
index 21fd942..3f8c5dc 100644
--- a/celt/mathops.c
+++ b/celt/mathops.c
@@ -139,7 +139,7 @@
#define L3 8277
#define L4 -626
-static inline opus_val16 _celt_cos_pi_2(opus_val16 x)
+static OPUS_INLINE opus_val16 _celt_cos_pi_2(opus_val16 x)
{
opus_val16 x2;
diff --git a/celt/mathops.h b/celt/mathops.h
index 7e7d906..a0525a9 100644
--- a/celt/mathops.h
+++ b/celt/mathops.h
@@ -44,7 +44,7 @@
unsigned isqrt32(opus_uint32 _val);
#ifndef OVERRIDE_CELT_MAXABS16
-static inline opus_val32 celt_maxabs16(const opus_val16 *x, int len)
+static OPUS_INLINE opus_val32 celt_maxabs16(const opus_val16 *x, int len)
{
int i;
opus_val16 maxval = 0;
@@ -60,7 +60,7 @@
#ifndef OVERRIDE_CELT_MAXABS32
#ifdef FIXED_POINT
-static inline opus_val32 celt_maxabs32(const opus_val32 *x, int len)
+static OPUS_INLINE opus_val32 celt_maxabs32(const opus_val32 *x, int len)
{
int i;
opus_val32 maxval = 0;
@@ -95,7 +95,7 @@
denorm, +/- inf and NaN are *not* handled */
/** Base-2 log approximation (log2(x)). */
-static inline float celt_log2(float x)
+static OPUS_INLINE float celt_log2(float x)
{
int integer;
float frac;
@@ -113,7 +113,7 @@
}
/** Base-2 exponential approximation (2^x). */
-static inline float celt_exp2(float x)
+static OPUS_INLINE float celt_exp2(float x)
{
int integer;
float frac;
@@ -145,7 +145,7 @@
#ifndef OVERRIDE_CELT_ILOG2
/** Integer log in base2. Undefined for zero and negative numbers */
-static inline opus_int16 celt_ilog2(opus_int32 x)
+static OPUS_INLINE opus_int16 celt_ilog2(opus_int32 x)
{
celt_assert2(x>0, "celt_ilog2() only defined for strictly positive numbers");
return EC_ILOG(x)-1;
@@ -154,7 +154,7 @@
/** Integer log in base2. Defined for zero, but not for negative numbers */
-static inline opus_int16 celt_zlog2(opus_val32 x)
+static OPUS_INLINE opus_int16 celt_zlog2(opus_val32 x)
{
return x <= 0 ? 0 : celt_ilog2(x);
}
@@ -166,7 +166,7 @@
opus_val16 celt_cos_norm(opus_val32 x);
/** Base-2 logarithm approximation (log2(x)). (Q14 input, Q10 output) */
-static inline opus_val16 celt_log2(opus_val32 x)
+static OPUS_INLINE opus_val16 celt_log2(opus_val32 x)
{
int i;
opus_val16 n, frac;
@@ -192,14 +192,14 @@
#define D2 14819
#define D3 10204
-static inline opus_val32 celt_exp2_frac(opus_val16 x)
+static OPUS_INLINE opus_val32 celt_exp2_frac(opus_val16 x)
{
opus_val16 frac;
frac = SHL16(x, 4);
return ADD16(D0, MULT16_16_Q15(frac, ADD16(D1, MULT16_16_Q15(frac, ADD16(D2 , MULT16_16_Q15(D3,frac))))));
}
/** Base-2 exponential approximation (2^x). (Q10 input, Q16 output) */
-static inline opus_val32 celt_exp2(opus_val16 x)
+static OPUS_INLINE opus_val32 celt_exp2(opus_val16 x)
{
int integer;
opus_val16 frac;
@@ -225,7 +225,7 @@
/* Atan approximation using a 4th order polynomial. Input is in Q15 format
and normalized by pi/4. Output is in Q15 format */
-static inline opus_val16 celt_atan01(opus_val16 x)
+static OPUS_INLINE opus_val16 celt_atan01(opus_val16 x)
{
return MULT16_16_P15(x, ADD32(M1, MULT16_16_P15(x, ADD32(M2, MULT16_16_P15(x, ADD32(M3, MULT16_16_P15(M4, x)))))));
}
@@ -236,7 +236,7 @@
#undef M4
/* atan2() approximation valid for positive input values */
-static inline opus_val16 celt_atan2p(opus_val16 y, opus_val16 x)
+static OPUS_INLINE opus_val16 celt_atan2p(opus_val16 y, opus_val16 x)
{
if (y < x)
{
diff --git a/celt/os_support.h b/celt/os_support.h
index 2484f0b..5e47e3c 100644
--- a/celt/os_support.h
+++ b/celt/os_support.h
@@ -35,13 +35,16 @@
# include "custom_support.h"
#endif
+#include "opus_types.h"
+#include "opus_defines.h"
+
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
/** Opus wrapper for malloc(). To do your own dynamic allocation, all you need to do is replace this function and opus_free */
#ifndef OVERRIDE_OPUS_ALLOC
-static inline void *opus_alloc (size_t size)
+static OPUS_INLINE void *opus_alloc (size_t size)
{
return malloc(size);
}
@@ -49,7 +52,7 @@
/** Same as celt_alloc(), except that the area is only needed inside a CELT call (might cause problem with wideband though) */
#ifndef OVERRIDE_OPUS_ALLOC_SCRATCH
-static inline void *opus_alloc_scratch (size_t size)
+static OPUS_INLINE void *opus_alloc_scratch (size_t size)
{
/* Scratch space doesn't need to be cleared */
return opus_alloc(size);
@@ -58,7 +61,7 @@
/** Opus wrapper for free(). To do your own dynamic allocation, all you need to do is replace this function and opus_alloc */
#ifndef OVERRIDE_OPUS_FREE
-static inline void opus_free (void *ptr)
+static OPUS_INLINE void opus_free (void *ptr)
{
free(ptr);
}
diff --git a/celt/pitch.c b/celt/pitch.c
index 0352b30..d2b3054 100644
--- a/celt/pitch.c
+++ b/celt/pitch.c
@@ -145,7 +145,7 @@
void pitch_downsample(celt_sig * OPUS_RESTRICT x[], opus_val16 * OPUS_RESTRICT x_lp,
- int len, int C)
+ int len, int C, int arch)
{
int i;
opus_val32 ac[5];
@@ -180,7 +180,7 @@
}
_celt_autocorr(x_lp, ac, NULL, 0,
- 4, len>>1);
+ 4, len>>1, arch);
/* Noise floor -40 dB */
#ifdef FIXED_POINT
@@ -250,9 +250,14 @@
#else
void
#endif
-celt_pitch_xcorr(const opus_val16 *_x, const opus_val16 *_y, opus_val32 *xcorr, int len, int max_pitch)
+celt_pitch_xcorr_c(const opus_val16 *_x, const opus_val16 *_y, opus_val32 *xcorr, int len, int max_pitch)
{
int i,j;
+ /*The EDSP version requires that max_pitch is at least 1, and that _x is
+ 32-bit aligned.
+ Since it's hard to put asserts in assembly, put them here.*/
+ celt_assert(max_pitch>0);
+ celt_assert((((unsigned char *)_x-(unsigned char *)NULL)&3)==0);
#ifdef FIXED_POINT
opus_val32 maxcorr=1;
#endif
@@ -289,7 +294,7 @@
#endif
void pitch_search(const opus_val16 * OPUS_RESTRICT x_lp, opus_val16 * OPUS_RESTRICT y,
- int len, int max_pitch, int *pitch)
+ int len, int max_pitch, int *pitch, int arch)
{
int i, j;
int lag;
@@ -342,7 +347,7 @@
#ifdef FIXED_POINT
maxcorr =
#endif
- celt_pitch_xcorr(x_lp4, y_lp4, xcorr, len>>2, max_pitch>>2);
+ celt_pitch_xcorr(x_lp4, y_lp4, xcorr, len>>2, max_pitch>>2, arch);
find_best_pitch(xcorr, y_lp4, len>>2, max_pitch>>2, best_pitch
#ifdef FIXED_POINT
diff --git a/celt/pitch.h b/celt/pitch.h
index caffd24..df317ec 100644
--- a/celt/pitch.h
+++ b/celt/pitch.h
@@ -35,16 +35,21 @@
#define PITCH_H
#include "modes.h"
+#include "cpu_support.h"
#if defined(__SSE__) && !defined(FIXED_POINT)
#include "x86/pitch_sse.h"
#endif
+#if defined(OPUS_ARM_ASM) && defined(FIXED_POINT)
+# include "arm/pitch_arm.h"
+#endif
+
void pitch_downsample(celt_sig * OPUS_RESTRICT x[], opus_val16 * OPUS_RESTRICT x_lp,
- int len, int C);
+ int len, int C, int arch);
void pitch_search(const opus_val16 * OPUS_RESTRICT x_lp, opus_val16 * OPUS_RESTRICT y,
- int len, int max_pitch, int *pitch);
+ int len, int max_pitch, int *pitch, int arch);
opus_val16 remove_doubling(opus_val16 *x, int maxperiod, int minperiod,
int N, int *T0, int prev_period, opus_val16 prev_gain);
@@ -52,10 +57,11 @@
/* OPT: This is the kernel you really want to optimize. It gets used a lot
by the prefilter and by the PLC. */
#ifndef OVERRIDE_XCORR_KERNEL
-static inline void xcorr_kernel(const opus_val16 * x, const opus_val16 * y, opus_val32 sum[4], int len)
+static OPUS_INLINE void xcorr_kernel(const opus_val16 * x, const opus_val16 * y, opus_val32 sum[4], int len)
{
int j;
opus_val16 y_0, y_1, y_2, y_3;
+ celt_assert(len>=3);
y_3=0; /* gcc doesn't realize that y_3 can't be used uninitialized */
y_0=*y++;
y_1=*y++;
@@ -119,7 +125,7 @@
#endif /* OVERRIDE_XCORR_KERNEL */
#ifndef OVERRIDE_DUAL_INNER_PROD
-static inline void dual_inner_prod(const opus_val16 *x, const opus_val16 *y01, const opus_val16 *y02,
+static OPUS_INLINE void dual_inner_prod(const opus_val16 *x, const opus_val16 *y01, const opus_val16 *y02,
int N, opus_val32 *xy1, opus_val32 *xy2)
{
int i;
@@ -140,6 +146,28 @@
#else
void
#endif
-celt_pitch_xcorr(const opus_val16 *_x, const opus_val16 *_y, opus_val32 *xcorr, int len, int max_pitch);
+celt_pitch_xcorr_c(const opus_val16 *_x, const opus_val16 *_y,
+ opus_val32 *xcorr, int len, int max_pitch);
+
+#if !defined(OVERRIDE_PITCH_XCORR)
+/*Is run-time CPU detection enabled on this platform?*/
+# if defined(OPUS_HAVE_RTCD)
+extern
+# if defined(FIXED_POINT)
+opus_val32
+# else
+void
+# endif
+(*const CELT_PITCH_XCORR_IMPL[OPUS_ARCHMASK+1])(const opus_val16 *,
+ const opus_val16 *, opus_val32 *, int, int);
+
+# define celt_pitch_xcorr(_x, _y, xcorr, len, max_pitch, arch) \
+ ((*CELT_PITCH_XCORR_IMPL[(arch)&OPUS_ARCHMASK])(_x, _y, \
+ xcorr, len, max_pitch))
+# else
+# define celt_pitch_xcorr(_x, _y, xcorr, len, max_pitch, arch) \
+ ((void)(arch),celt_pitch_xcorr_c(_x, _y, xcorr, len, max_pitch))
+# endif
+#endif
#endif
diff --git a/celt/quant_bands.c b/celt/quant_bands.c
index 79685e1..ac6952c 100644
--- a/celt/quant_bands.c
+++ b/celt/quant_bands.c
@@ -312,6 +312,7 @@
opus_int32 tell_intra;
opus_uint32 nstart_bytes;
opus_uint32 nintra_bytes;
+ opus_uint32 save_bytes;
int badness2;
VARDECL(unsigned char, intra_bits);
@@ -322,7 +323,10 @@
nstart_bytes = ec_range_bytes(&enc_start_state);
nintra_bytes = ec_range_bytes(&enc_intra_state);
intra_buf = ec_get_buffer(&enc_intra_state) + nstart_bytes;
- ALLOC(intra_bits, nintra_bytes-nstart_bytes, unsigned char);
+ save_bytes = nintra_bytes-nstart_bytes;
+ if (save_bytes == 0)
+ save_bytes = ALLOC_NONE;
+ ALLOC(intra_bits, save_bytes, unsigned char);
/* Copy bits from intra bit-stream */
OPUS_COPY(intra_bits, intra_buf, nintra_bytes - nstart_bytes);
diff --git a/celt/rate.c b/celt/rate.c
index e474cf5..e13d839 100644
--- a/celt/rate.c
+++ b/celt/rate.c
@@ -245,7 +245,7 @@
#define ALLOC_STEPS 6
-static inline int interp_bits2pulses(const CELTMode *m, int start, int end, int skip_start,
+static OPUS_INLINE int interp_bits2pulses(const CELTMode *m, int start, int end, int skip_start,
const int *bits1, const int *bits2, const int *thresh, const int *cap, opus_int32 total, opus_int32 *_balance,
int skip_rsv, int *intensity, int intensity_rsv, int *dual_stereo, int dual_stereo_rsv, int *bits,
int *ebits, int *fine_priority, int C, int LM, ec_ctx *ec, int encode, int prev, int signalBandwidth)
diff --git a/celt/rate.h b/celt/rate.h
index 263fde9..f1e0661 100644
--- a/celt/rate.h
+++ b/celt/rate.h
@@ -45,12 +45,12 @@
void compute_pulse_cache(CELTMode *m, int LM);
-static inline int get_pulses(int i)
+static OPUS_INLINE int get_pulses(int i)
{
return i<8 ? i : (8 + (i&7)) << ((i>>3)-1);
}
-static inline int bits2pulses(const CELTMode *m, int band, int LM, int bits)
+static OPUS_INLINE int bits2pulses(const CELTMode *m, int band, int LM, int bits)
{
int i;
int lo, hi;
@@ -77,7 +77,7 @@
return hi;
}
-static inline int pulses2bits(const CELTMode *m, int band, int LM, int pulses)
+static OPUS_INLINE int pulses2bits(const CELTMode *m, int band, int LM, int pulses)
{
const unsigned char *cache;
diff --git a/celt/stack_alloc.h b/celt/stack_alloc.h
index 1c093a8..316a6ce 100644
--- a/celt/stack_alloc.h
+++ b/celt/stack_alloc.h
@@ -32,6 +32,9 @@
#ifndef STACK_ALLOC_H
#define STACK_ALLOC_H
+#include "opus_types.h"
+#include "opus_defines.h"
+
#if (!defined (VAR_ARRAYS) && !defined (USE_ALLOCA) && !defined (NONTHREADSAFE_PSEUDOSTACK))
#error "Opus requires one of VAR_ARRAYS, USE_ALLOCA, or NONTHREADSAFE_PSEUDOSTACK be defined to select the temporary allocation mode."
#endif
@@ -92,6 +95,8 @@
#define SAVE_STACK
#define RESTORE_STACK
#define ALLOC_STACK
+/* C99 does not allow VLAs of size zero */
+#define ALLOC_NONE 1
#elif defined(USE_ALLOCA)
@@ -106,6 +111,7 @@
#define SAVE_STACK
#define RESTORE_STACK
#define ALLOC_STACK
+#define ALLOC_NONE 0
#else
@@ -143,6 +149,7 @@
#define VARDECL(type, var) type *var
#define ALLOC(var, size, type) var = PUSH(global_stack, size, type)
#define SAVE_STACK char *_saved_stack = global_stack;
+#define ALLOC_NONE 0
#endif /* VAR_ARRAYS */
@@ -159,7 +166,7 @@
#else
-static inline int _opus_false(void) {return 0;}
+static OPUS_INLINE int _opus_false(void) {return 0;}
#define OPUS_CHECK_ARRAY(ptr, len) _opus_false()
#define OPUS_CHECK_VALUE(value) _opus_false()
#define OPUS_PRINT_INT(value) do{}while(0)
diff --git a/celt/x86/pitch_sse.h b/celt/x86/pitch_sse.h
index 63ae3d4..695122a 100644
--- a/celt/x86/pitch_sse.h
+++ b/celt/x86/pitch_sse.h
@@ -36,7 +36,7 @@
#include "arch.h"
#define OVERRIDE_XCORR_KERNEL
-static inline void xcorr_kernel(const opus_val16 *x, const opus_val16 *y, opus_val32 sum[4], int len)
+static OPUS_INLINE void xcorr_kernel(const opus_val16 *x, const opus_val16 *y, opus_val32 sum[4], int len)
{
int j;
__m128 xsum1, xsum2;
@@ -72,7 +72,7 @@
}
#define OVERRIDE_DUAL_INNER_PROD
-static inline void dual_inner_prod(const opus_val16 *x, const opus_val16 *y01, const opus_val16 *y02,
+static OPUS_INLINE void dual_inner_prod(const opus_val16 *x, const opus_val16 *y01, const opus_val16 *y02,
int N, opus_val32 *xy1, opus_val32 *xy2)
{
int i;
@@ -102,7 +102,7 @@
}
#define OVERRIDE_COMB_FILTER_CONST
-static inline void comb_filter_const(opus_val32 *y, opus_val32 *x, int T, int N,
+static OPUS_INLINE void comb_filter_const(opus_val32 *y, opus_val32 *x, int T, int N,
opus_val16 g10, opus_val16 g11, opus_val16 g12)
{
int i;
diff --git a/celt_headers.mk b/celt_headers.mk
index 067b294..8811e16 100644
--- a/celt_headers.mk
+++ b/celt_headers.mk
@@ -35,4 +35,5 @@
celt/arm/fixed_armv5e.h \
celt/arm/kiss_fft_armv4.h \
celt/arm/kiss_fft_armv5e.h \
+celt/arm/pitch_arm.h \
celt/x86/pitch_sse.h
diff --git a/celt_sources.mk b/celt_sources.mk
index e1aee8f..2bbe770 100644
--- a/celt_sources.mk
+++ b/celt_sources.mk
@@ -18,4 +18,11 @@
celt/vq.c
CELT_SOURCES_ARM = \
-celt/arm/armcpu.c
+celt/arm/armcpu.c \
+celt/arm/arm_celt_map.c
+
+CELT_SOURCES_ARM_ASM = \
+celt/arm/celt_pitch_xcorr_arm.s
+
+CELT_AM_SOURCES_ARM_ASM = \
+celt/arm/armopts.s.in
diff --git a/codereview.settings b/codereview.settings
new file mode 100644
index 0000000..93335d3
--- /dev/null
+++ b/codereview.settings
@@ -0,0 +1,10 @@
+# This file is used by gcl to get repository specific information.
+CODE_REVIEW_SERVER: codereview.chromium.org
+CC_LIST: [email protected]
+VIEW_VC: https://src.chromium.org/viewvc/chrome?view=rev&revision=
+STATUS: http://chromium-status.appspot.com/status
+TRY_ON_UPLOAD: True
+TRYSERVER_SVN_URL: svn://svn.chromium.org/chrome-try/try
+GITCL_PREUPLOAD: http://src.chromium.org/viewvc/trunk/tools/depot_tools/git-cl-upload-hook?revision=HEAD&root=chrome
+GITCL_PREDCOMMIT: http://src.chromium.org/viewvc/trunk/tools/depot_tools/git-cl-upload-hook?revision=HEAD&root=chrome
+LINT_IGNORE_REGEX: webkit/api/.*
diff --git a/config.h.in b/config.h.in
index a5e9503..36f4fb7 100644
--- a/config.h.in
+++ b/config.h.in
@@ -3,6 +3,9 @@
/* Custom modes */
#undef CUSTOM_MODES
+/* Do not build the float API */
+#undef DISABLE_FLOAT_API
+
/* Assertions */
#undef ENABLE_ASSERTIONS
@@ -24,9 +27,6 @@
/* Define to 1 if you have the <dlfcn.h> header file. */
#undef HAVE_DLFCN_H
-/* Define to 1 if you have the <getopt.h> header file. */
-#undef HAVE_GETOPT_H
-
/* Define to 1 if you have the <inttypes.h> header file. */
#undef HAVE_INTTYPES_H
@@ -70,11 +70,44 @@
/* Define to 1 if your C compiler doesn't accept -c and -o together. */
#undef NO_MINUS_C_MINUS_O
+/* Make use of ARM asm optimization */
+#undef OPUS_ARM_ASM
+
+/* Use generic ARMv4 inline asm optimizations */
+#undef OPUS_ARM_INLINE_ASM
+
+/* Use ARMv5E inline asm optimizations */
+#undef OPUS_ARM_INLINE_EDSP
+
+/* Use ARMv6 inline asm optimizations */
+#undef OPUS_ARM_INLINE_MEDIA
+
+/* Use ARM NEON inline asm optimizations */
+#undef OPUS_ARM_INLINE_NEON
+
+/* Define if assembler supports EDSP instructions */
+#undef OPUS_ARM_MAY_HAVE_EDSP
+
+/* Define if assembler supports ARMv6 media instructions */
+#undef OPUS_ARM_MAY_HAVE_MEDIA
+
+/* Define if compiler supports NEON instructions */
+#undef OPUS_ARM_MAY_HAVE_NEON
+
+/* Define if binary requires EDSP instruction support */
+#undef OPUS_ARM_PRESUME_EDSP
+
+/* Define if binary requires ARMv6 media instruction support */
+#undef OPUS_ARM_PRESUME_MEDIA
+
+/* Define if binary requires NEON instruction support */
+#undef OPUS_ARM_PRESUME_NEON
+
/* This is a build of OPUS */
#undef OPUS_BUILD
-/* Opus library version string */
-#undef OPUS_VERSION
+/* Use run-time CPU capabilities detection */
+#undef OPUS_HAVE_RTCD
/* Define to the address where bug reports for this package should be sent. */
#undef PACKAGE_BUGREPORT
@@ -94,18 +127,6 @@
/* Define to the version of this package. */
#undef PACKAGE_VERSION
-/* The size of `int', as computed by sizeof. */
-#undef SIZEOF_INT
-
-/* The size of `long', as computed by sizeof. */
-#undef SIZEOF_LONG
-
-/* The size of `long long', as computed by sizeof. */
-#undef SIZEOF_LONG_LONG
-
-/* The size of `short', as computed by sizeof. */
-#undef SIZEOF_SHORT
-
/* Define to 1 if you have the ANSI C header files. */
#undef STDC_HEADERS
diff --git a/configure b/configure
index 00405ba..c6cb40a 100755
--- a/configure
+++ b/configure
@@ -1,6 +1,8 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.68.
+# Generated by GNU Autoconf 2.68 for opus 1.1.
+#
+# Report bugs to <[email protected]>.
#
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -244,10 +246,11 @@
$as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
$as_echo "$0: be upgraded to zsh 4.3.4 or later."
else
- $as_echo "$0: Please tell [email protected] about your system,
-$0: including any error possibly output before this
-$0: message. Then install a modern shell, or manually run
-$0: the script under such a shell if you do have one."
+ $as_echo "$0: Please tell [email protected] and [email protected]
+$0: about your system, including any error possibly output
+$0: before this message. Then install a modern shell, or
+$0: manually run the script under such a shell if you do
+$0: have one."
fi
exit 1
fi
@@ -565,12 +568,12 @@
MAKEFLAGS=
# Identity of this package.
-PACKAGE_NAME=
-PACKAGE_TARNAME=
-PACKAGE_VERSION=
-PACKAGE_STRING=
-PACKAGE_BUGREPORT=
-PACKAGE_URL=
+PACKAGE_NAME='opus'
+PACKAGE_TARNAME='opus'
+PACKAGE_VERSION='1.1'
+PACKAGE_STRING='opus 1.1'
+PACKAGE_BUGREPORT='[email protected]'
+PACKAGE_URL=''
ac_unique_file="src/opus_encoder.c"
# Factoring default headers for most tests.
@@ -613,19 +616,35 @@
am__EXEEXT_TRUE
LTLIBOBJS
LIBOBJS
-PC_LIBM
PC_BUILD
-CUSTOM_MODES_FALSE
-CUSTOM_MODES_TRUE
-FIXED_POINT_FALSE
-FIXED_POINT_TRUE
-SIZE32
-SIZE16
-SYMBOL_VISIBILITY
+EXTRA_PROGRAMS_FALSE
+EXTRA_PROGRAMS_TRUE
HAVE_DOXYGEN_FALSE
HAVE_DOXYGEN_TRUE
HAVE_DOXYGEN
+OPUS_HAVE_RTCD
+CPU_ARM_FALSE
+CPU_ARM_TRUE
+OPUS_ARM_MAY_HAVE_NEON
+OPUS_ARM_MAY_HAVE_MEDIA
+OPUS_ARM_MAY_HAVE_EDSP
+OPUS_ARM_EXTERNAL_ASM_FALSE
+OPUS_ARM_EXTERNAL_ASM_TRUE
+HAVE_PERL
+OPUS_ARM_INLINE_ASM_FALSE
+OPUS_ARM_INLINE_ASM_TRUE
+CUSTOM_MODES_FALSE
+CUSTOM_MODES_TRUE
+DISABLE_FLOAT_API_FALSE
+DISABLE_FLOAT_API_TRUE
+FIXED_POINT_FALSE
+FIXED_POINT_TRUE
LIBM
+am__fastdepCCAS_FALSE
+am__fastdepCCAS_TRUE
+CCASDEPMODE
+CCASFLAGS
+CCAS
CPP
OTOOL64
OTOOL
@@ -702,7 +721,6 @@
OPUS_LT_AGE
OPUS_LT_REVISION
OPUS_LT_CURRENT
-OPUS_VERSION
AM_BACKSLASH
AM_DEFAULT_VERBOSITY
AM_DEFAULT_V
@@ -760,11 +778,15 @@
enable_libtool_lock
enable_fixed_point
enable_fixed_point_debug
+enable_float_api
enable_custom_modes
enable_float_approx
+enable_asm
+enable_rtcd
enable_assertions
enable_fuzzing
enable_doc
+enable_extra_programs
'
ac_precious_vars='build_alias
host_alias
@@ -774,7 +796,9 @@
LDFLAGS
LIBS
CPPFLAGS
-CPP'
+CPP
+CCAS
+CCASFLAGS'
# Initialize some variables set by options.
@@ -815,7 +839,7 @@
localstatedir='${prefix}/var'
includedir='${prefix}/include'
oldincludedir='/usr/include'
-docdir='${datarootdir}/doc/${PACKAGE}'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
infodir='${datarootdir}/info'
htmldir='${docdir}'
dvidir='${docdir}'
@@ -1317,7 +1341,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures this package to adapt to many kinds of systems.
+\`configure' configures opus 1.1 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1365,7 +1389,7 @@
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
- --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/opus]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
@@ -1386,7 +1410,9 @@
fi
if test -n "$ac_init_help"; then
-
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of opus 1.1:";;
+ esac
cat <<\_ACEOF
Optional Features:
@@ -1404,13 +1430,21 @@
--disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors
--disable-libtool-lock avoid locking (might break parallel builds)
- --enable-fixed-point compile without floating point (for machines without a fast enough FPU)
- --enable-fixed-point-debug debug fixed-point implementation
- --enable-custom-modes enable non-Opus modes, e.g. 44.1 kHz & 2^n frames
- --enable-float-approx enable fast approximations for floating point
- --enable-assertions enable additional software error checking
- --enable-fuzzing causes the encoder to make random decisions
+ --enable-fixed-point compile without floating point (for machines without
+ a fast enough FPU)
+ --enable-fixed-point-debug
+ debug fixed-point implementation
+ --disable-float-api compile without the floating point API (for machines
+ with no float library)
+ --enable-custom-modes enable non-Opus modes, e.g. 44.1 kHz & 2^n frames
+ --enable-float-approx enable fast approximations for floating point
+ --disable-asm Disable assembly optimizations
+ --disable-rtcd Disable run-time CPU capabilities detection
+ --enable-assertions enable additional software error checking
+ --enable-fuzzing causes the encoder to make random decisions
--disable-doc Do not build API documentation
+ --disable-extra-programs
+ Do not build extra programs (demo and tests)
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
@@ -1430,11 +1464,13 @@
CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CPP C preprocessor
+ CCAS assembler compiler command (defaults to CC)
+ CCASFLAGS assembler compiler flags (defaults to CFLAGS)
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
-Report bugs to the package provider.
+Report bugs to <[email protected]>.
_ACEOF
ac_status=$?
fi
@@ -1497,7 +1533,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-configure
+opus configure 1.1
generated by GNU Autoconf 2.68
Copyright (C) 2010 Free Software Foundation, Inc.
@@ -1842,6 +1878,10 @@
$as_echo "$as_me: WARNING: $2: section \"Present But Cannot Be Compiled\"" >&2;}
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $2: proceeding with the compiler's result" >&5
$as_echo "$as_me: WARNING: $2: proceeding with the compiler's result" >&2;}
+( $as_echo "## ---------------------------- ##
+## Report this to [email protected] ##
+## ---------------------------- ##"
+ ) | sed "s/^/$as_me: WARNING: /" >&2
;;
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
@@ -1858,189 +1898,11 @@
eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
} # ac_fn_c_check_header_mongrel
-
-# ac_fn_c_compute_int LINENO EXPR VAR INCLUDES
-# --------------------------------------------
-# Tries to find the compile-time value of EXPR in a program that includes
-# INCLUDES, setting VAR accordingly. Returns whether the value could be
-# computed
-ac_fn_c_compute_int ()
-{
- as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
- if test "$cross_compiling" = yes; then
- # Depending upon the size, compute the lo and hi bounds.
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) >= 0)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_lo=0 ac_mid=0
- while :; do
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) <= $ac_mid)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_hi=$ac_mid; break
-else
- as_fn_arith $ac_mid + 1 && ac_lo=$as_val
- if test $ac_lo -le $ac_mid; then
- ac_lo= ac_hi=
- break
- fi
- as_fn_arith 2 '*' $ac_mid + 1 && ac_mid=$as_val
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
-else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) < 0)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_hi=-1 ac_mid=-1
- while :; do
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) >= $ac_mid)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_lo=$ac_mid; break
-else
- as_fn_arith '(' $ac_mid ')' - 1 && ac_hi=$as_val
- if test $ac_mid -le $ac_hi; then
- ac_lo= ac_hi=
- break
- fi
- as_fn_arith 2 '*' $ac_mid && ac_mid=$as_val
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
- done
-else
- ac_lo= ac_hi=
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-# Binary search between lo and hi bounds.
-while test "x$ac_lo" != "x$ac_hi"; do
- as_fn_arith '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo && ac_mid=$as_val
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-int
-main ()
-{
-static int test_array [1 - 2 * !(($2) <= $ac_mid)];
-test_array [0] = 0
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_compile "$LINENO"; then :
- ac_hi=$ac_mid
-else
- as_fn_arith '(' $ac_mid ')' + 1 && ac_lo=$as_val
-fi
-rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-case $ac_lo in #((
-?*) eval "$3=\$ac_lo"; ac_retval=0 ;;
-'') ac_retval=1 ;;
-esac
- else
- cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-$4
-static long int longval () { return $2; }
-static unsigned long int ulongval () { return $2; }
-#include <stdio.h>
-#include <stdlib.h>
-int
-main ()
-{
-
- FILE *f = fopen ("conftest.val", "w");
- if (! f)
- return 1;
- if (($2) < 0)
- {
- long int i = longval ();
- if (i != ($2))
- return 1;
- fprintf (f, "%ld", i);
- }
- else
- {
- unsigned long int i = ulongval ();
- if (i != ($2))
- return 1;
- fprintf (f, "%lu", i);
- }
- /* Do not output a trailing newline, as this causes \r\n confusion
- on some platforms. */
- return ferror (f) || fclose (f) != 0;
-
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_run "$LINENO"; then :
- echo >>conftest.val; read $3 <conftest.val; ac_retval=0
-else
- ac_retval=1
-fi
-rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
- conftest.$ac_objext conftest.beam conftest.$ac_ext
-rm -f conftest.val
-
- fi
- eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
- as_fn_set_status $ac_retval
-
-} # ac_fn_c_compute_int
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by $as_me, which was
+It was created by opus $as_me 1.1, which was
generated by GNU Autoconf 2.68. Invocation command line was
$ $0 $@
@@ -2389,7 +2251,7 @@
-ac_config_headers="$ac_config_headers config.h"
+
# Check whether --enable-silent-rules was given.
@@ -2432,63 +2294,10 @@
AM_BACKSLASH='\'
-# Read our default version string from version.mk.
-# Please update this file for releases.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking version.mk" >&5
-$as_echo_n "checking version.mk... " >&6; }
-MK_VERSION=$(awk 'BEGIN { FS = "=" }
- /OPUS_VERSION/ { ver = $2}
- END {
- gsub(/"/, "", ver);
- gsub(/^ /, "", ver);
- gsub(/ $/, "", ver);
- print ver;
- }' $srcdir/version.mk)
-if test -z "$MK_VERSION"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MK_VERSION" >&5
-$as_echo "$MK_VERSION" >&6; }
- OPUS_VERSION="$MK_VERSION"
-fi
-
-# Override with the git version, if available.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking git revision" >&5
-$as_echo_n "checking git revision... " >&6; }
-GIT_VERSION=$(git describe --tags --match 'v*' 2>/dev/null | sed 's/^v//')
-if test -z "$GIT_VERSION"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GIT_VERSION" >&5
-$as_echo "$GIT_VERSION" >&6; }
- OPUS_VERSION="$GIT_VERSION"
-fi
-
-# Use 'unknown' if all else fails.
-if test -z "$OPUS_VERSION"; then
- OPUS_VERSION="unknown"
-fi
-
-# For automake.
-PACKAGE=opus
-VERSION=$OPUS_VERSION
-
-# For autoconf
-
-
-# For config.h.
-
-cat >>confdefs.h <<_ACEOF
-#define OPUS_VERSION "$OPUS_VERSION"
-_ACEOF
-
-
# For libtool.
-OPUS_LT_CURRENT=3
+OPUS_LT_CURRENT=5
OPUS_LT_REVISION=0
-OPUS_LT_AGE=3
+OPUS_LT_AGE=5
@@ -2960,8 +2769,8 @@
# Define the identity of the package.
- PACKAGE=$PACKAGE
- VERSION=$VERSION
+ PACKAGE='opus'
+ VERSION='1.1'
# Some tools Automake needs.
@@ -8042,6 +7851,10 @@
$RM -r conftest*
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
if test -n "$compiler"; then
lt_prog_compiler_no_builtin_flag=
@@ -12012,8 +11825,148 @@
esac
+# By default we simply use the C compiler to build assembly code.
+
+test "${CCAS+set}" = set || CCAS=$CC
+test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
+
+
+
+depcc="$CCAS" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CCAS_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named `D' -- because `-MD' means `put the output
+ # in D'.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CCAS_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
+ # Solaris 8's {/usr,}/bin/sh.
+ touch sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with `-c' and `-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle `-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # after this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok `-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CCAS_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CCAS_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CCAS_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CCAS_dependencies_compiler_type" >&6; }
+CCASDEPMODE=depmode=$am_cv_CCAS_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3; then
+ am__fastdepCCAS_TRUE=
+ am__fastdepCCAS_FALSE='#'
+else
+ am__fastdepCCAS_TRUE='#'
+ am__fastdepCCAS_FALSE=
+fi
+
+
+
+
+$as_echo "#define OPUS_BUILD /**/" >>confdefs.h
+
+
#Use a hacked up version of autoconf's AC_C_RESTRICT because it's not
#strong enough a test to detect old buggy versions of GCC (e.g. 2.95.3)
+#Note: Both this and the test for variable-size arrays below are also
+# done by AC_PROG_CC_C99, but not thoroughly enough apparently.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C/C++ restrict keyword" >&5
$as_echo_n "checking for C/C++ restrict keyword... " >&6; }
if ${ac_cv_c_restrict+:} false; then :
@@ -12025,16 +11978,16 @@
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
typedef int * int_ptr;
- int foo (int_ptr $ac_kw ip, int * $ac_kw baz[]) {
- return ip[0];
+ int foo (int_ptr $ac_kw ip, int * $ac_kw baz[]) {
+ return ip[0];
}
int
main ()
{
int s[1];
- int * $ac_kw t = s;
- t[0] = 0;
- return foo(t, (void *)0)
+ int * $ac_kw t = s;
+ t[0] = 0;
+ return foo(t, (void *)0)
;
return 0;
}
@@ -12050,7 +12003,9 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_restrict" >&5
$as_echo "$ac_cv_c_restrict" >&6; }
- case $ac_cv_c_restrict in
+
+
+case $ac_cv_c_restrict in
restrict) ;;
no) $as_echo "#define restrict /**/" >>confdefs.h
;;
@@ -12058,11 +12013,7 @@
#define restrict $ac_cv_c_restrict
_ACEOF
;;
- esac
-
-
-$as_echo "#define OPUS_BUILD /**/" >>confdefs.h
-
+esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C99 variable-size arrays" >&5
$as_echo_n "checking for C99 variable-size arrays... " >&6; }
@@ -12078,75 +12029,114 @@
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
- has_var_arrays=yes;
-$as_echo "#define VAR_ARRAYS /**/" >>confdefs.h
+ has_var_arrays=yes
+ use_alloca="no (using var arrays)"
+
+$as_echo "#define VAR_ARRAYS 1" >>confdefs.h
else
- has_var_arrays=no
+
+ has_var_arrays=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $has_var_arrays" >&5
$as_echo "$has_var_arrays" >&6; }
-for ac_header in alloca.h getopt.h
+if test "$has_var_arrays" = "no"; then :
+
+ for ac_header in alloca.h
do :
- as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
-ac_fn_c_check_header_mongrel "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default"
-if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ ac_fn_c_check_header_mongrel "$LINENO" "alloca.h" "ac_cv_header_alloca_h" "$ac_includes_default"
+if test "x$ac_cv_header_alloca_h" = xyes; then :
cat >>confdefs.h <<_ACEOF
-#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+#define HAVE_ALLOCA_H 1
_ACEOF
fi
done
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for alloca" >&5
$as_echo_n "checking for alloca... " >&6; }
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
#include <alloca.h>
int
main ()
{
-
-int foo=10;
-int *array = alloca(foo);
-
+int foo=10; int *array = alloca(foo);
;
return 0;
}
_ACEOF
if ac_fn_c_try_compile "$LINENO"; then :
-
-has_alloca=yes;
-if test x$has_var_arrays = "xno" ; then
+ use_alloca=yes;
$as_echo "#define USE_ALLOCA /**/" >>confdefs.h
-fi
else
- has_alloca=no
+
+ use_alloca=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $has_alloca" >&5
-$as_echo "$has_alloca" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $use_alloca" >&5
+$as_echo "$use_alloca" >&6; }
-ac_fn_c_check_func "$LINENO" "exp" "ac_cv_func_exp"
-if test "x$ac_cv_func_exp" = xyes; then :
- fp_libm_not_needed=yes;LIBM=
-else
- fp_libm_not_needed=dunno
fi
-if test x"$fp_libm_not_needed" = xdunno; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for exp in -lm" >&5
-$as_echo_n "checking for exp in -lm... " >&6; }
-if ${ac_cv_lib_m_exp+:} false; then :
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+ # These system don't have libm, or don't need it
+ ;;
+*-ncr-sysv4.3*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for _mwvalidcheckl in -lmw" >&5
+$as_echo_n "checking for _mwvalidcheckl in -lmw... " >&6; }
+if ${ac_cv_lib_mw__mwvalidcheckl+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lmw $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char _mwvalidcheckl ();
+int
+main ()
+{
+return _mwvalidcheckl ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_mw__mwvalidcheckl=yes
+else
+ ac_cv_lib_mw__mwvalidcheckl=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_mw__mwvalidcheckl" >&5
+$as_echo "$ac_cv_lib_mw__mwvalidcheckl" >&6; }
+if test "x$ac_cv_lib_mw__mwvalidcheckl" = xyes; then :
+ LIBM="-lmw"
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
+$as_echo_n "checking for cos in -lm... " >&6; }
+if ${ac_cv_lib_m_cos+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
@@ -12160,32 +12150,173 @@
#ifdef __cplusplus
extern "C"
#endif
-char exp ();
+char cos ();
int
main ()
{
-return exp ();
+return cos ();
;
return 0;
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_m_exp=yes
+ ac_cv_lib_m_cos=yes
else
- ac_cv_lib_m_exp=no
+ ac_cv_lib_m_cos=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_exp" >&5
-$as_echo "$ac_cv_lib_m_exp" >&6; }
-if test "x$ac_cv_lib_m_exp" = xyes; then :
- LIBS="-lm $LIBS"; LIBM="-lm"
-else
- LIBM=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5
+$as_echo "$ac_cv_lib_m_cos" >&6; }
+if test "x$ac_cv_lib_m_cos" = xyes; then :
+ LIBM="$LIBM -lm"
fi
+ ;;
+*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for cos in -lm" >&5
+$as_echo_n "checking for cos in -lm... " >&6; }
+if ${ac_cv_lib_m_cos+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char cos ();
+int
+main ()
+{
+return cos ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_m_cos=yes
+else
+ ac_cv_lib_m_cos=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_cos" >&5
+$as_echo "$ac_cv_lib_m_cos" >&6; }
+if test "x$ac_cv_lib_m_cos" = xyes; then :
+ LIBM="-lm"
+fi
+
+ ;;
+esac
+
+
+
+# Check whether --enable-fixed-point was given.
+if test "${enable_fixed_point+set}" = set; then :
+ enableval=$enable_fixed_point;
+else
+ enable_fixed_point=no
+fi
+
+
+if test "$enable_fixed_point" = "yes"; then :
+
+ enable_float="no"
+
+$as_echo "#define FIXED_POINT 1" >>confdefs.h
+
+ PC_BUILD="fixed-point"
+
+else
+
+ enable_float="yes";
+ PC_BUILD="floating-point"
+
+fi
+
+ if test "$enable_fixed_point" = "yes"; then
+ FIXED_POINT_TRUE=
+ FIXED_POINT_FALSE='#'
+else
+ FIXED_POINT_TRUE='#'
+ FIXED_POINT_FALSE=
+fi
+
+
+# Check whether --enable-fixed-point-debug was given.
+if test "${enable_fixed_point_debug+set}" = set; then :
+ enableval=$enable_fixed_point_debug;
+else
+ enable_fixed_point_debug=no
+fi
+
+
+if test "$enable_fixed_point_debug" = "yes"; then :
+
+
+$as_echo "#define FIXED_DEBUG 1" >>confdefs.h
+
+
+fi
+
+# Check whether --enable-float_api was given.
+if test "${enable_float_api+set}" = set; then :
+ enableval=$enable_float_api;
+else
+ enable_float_api=yes
+fi
+
+
+ if test "$enable_float_api" = "no"; then
+ DISABLE_FLOAT_API_TRUE=
+ DISABLE_FLOAT_API_FALSE='#'
+else
+ DISABLE_FLOAT_API_TRUE='#'
+ DISABLE_FLOAT_API_FALSE=
+fi
+
+
+if test "$enable_float_api" = "no"; then :
+
+
+$as_echo "#define DISABLE_FLOAT_API 1" >>confdefs.h
+
+
+fi
+
+# Check whether --enable-custom-modes was given.
+if test "${enable_custom_modes+set}" = set; then :
+ enableval=$enable_custom_modes;
+else
+ enable_custom_modes=no
+fi
+
+
+if test "$enable_custom_modes" = "yes"; then :
+
+
+$as_echo "#define CUSTOM_MODES 1" >>confdefs.h
+
+ PC_BUILD="$PC_BUILD, custom modes"
+
+fi
+
+ if test "$enable_custom_modes" = "yes"; then
+ CUSTOM_MODES_TRUE=
+ CUSTOM_MODES_FALSE='#'
+else
+ CUSTOM_MODES_TRUE='#'
+ CUSTOM_MODES_FALSE=
fi
@@ -12196,96 +12327,564 @@
# ;;
#esac
-ac_enable_fixed="no";
-ac_enable_float="yes";
-# Check whether --enable-fixed-point was given.
-if test "${enable_fixed_point+set}" = set; then :
- enableval=$enable_fixed_point; if test "$enableval" = yes; then
- ac_enable_fixed="yes";
- ac_enable_float="no";
-
-$as_echo "#define FIXED_POINT 1" >>confdefs.h
-
-fi
-fi
-
-
-ac_enable_fixed_debug="no"
-# Check whether --enable-fixed-point-debug was given.
-if test "${enable_fixed_point_debug+set}" = set; then :
- enableval=$enable_fixed_point_debug; if test "$enableval" = yes; then
- ac_enable_fixed_debug="yes"
-
-$as_echo "#define FIXED_DEBUG /**/" >>confdefs.h
-
-fi
-fi
-
-
-ac_enable_custom_modes="no"
-# Check whether --enable-custom-modes was given.
-if test "${enable_custom_modes+set}" = set; then :
- enableval=$enable_custom_modes; if test "$enableval" = yes; then
- ac_enable_custom_modes="yes"
-
-$as_echo "#define CUSTOM_MODES /**/" >>confdefs.h
-
-fi
-fi
-
-
-float_approx=$has_float_approx
# Check whether --enable-float-approx was given.
if test "${enable_float_approx+set}" = set; then :
- enableval=$enable_float_approx; if test "$enableval" = yes; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Floating point approximations are not supported on all platforms." >&5
+ enableval=$enable_float_approx; if test "$enable_float_approx" = "yes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Floating point approximations are not supported on all platforms." >&5
$as_echo "$as_me: WARNING: Floating point approximations are not supported on all platforms." >&2;}
- float_approx=yes
- else
- float_approx=no
- fi
+ fi
+
else
- float_approx=$has_float_approx
+ enable_float_approx=$has_float_approx
fi
-if test "x${float_approx}" = "xyes"; then
+if test "$enable_float_approx" = "yes"; then :
-$as_echo "#define FLOAT_APPROX /**/" >>confdefs.h
+
+$as_echo "#define FLOAT_APPROX 1" >>confdefs.h
+
fi
-ac_enable_assertions="no"
+# Check whether --enable-asm was given.
+if test "${enable_asm+set}" = set; then :
+ enableval=$enable_asm;
+else
+ enable_asm=yes
+fi
+
+
+# Check whether --enable-rtcd was given.
+if test "${enable_rtcd+set}" = set; then :
+ enableval=$enable_rtcd;
+else
+ enable_rtcd=yes
+fi
+
+
+rtcd_support=no
+cpu_arm=no
+
+if test x"${enable_asm}" = x"yes"; then :
+
+ inline_optimization="No ASM for your platform, please send patches"
+ case $host_cpu in
+ arm*)
+ if test "$enable_float" != "yes"; then :
+
+ cpu_arm=yes
+
+$as_echo "#define OPUS_ARM_ASM /**/" >>confdefs.h
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if compiler supports gcc-style inline assembly" >&5
+$as_echo_n "checking if compiler supports gcc-style inline assembly... " >&6; }
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+#ifdef __GNUC_MINOR__
+#if (__GNUC__ * 1000 + __GNUC_MINOR__) < 3004
+#error GCC before 3.4 has critical bugs compiling inline assembly
+#endif
+#endif
+__asm__ (""::)
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ flag_ok=yes
+else
+ flag_ok=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+ if test "X$flag_ok" = Xyes ; then
+ inline_optimization="ARM"
+ true
+ else
+ inline_optimization="disabled"
+
+ true
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $flag_ok" >&5
+$as_echo "$flag_ok" >&6; }
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if assembler supports EDSP instructions on ARM" >&5
+$as_echo_n "checking if assembler supports EDSP instructions on ARM... " >&6; }
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+__asm__("qadd r3,r3,r3")
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ OPUS_ARM_INLINE_EDSP=1
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ OPUS_ARM_INLINE_EDSP=0
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if assembler supports ARMv6 media instructions on ARM" >&5
+$as_echo_n "checking if assembler supports ARMv6 media instructions on ARM... " >&6; }
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+__asm__("shadd8 r3,r3,r3")
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ OPUS_ARM_INLINE_MEDIA=1
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ OPUS_ARM_INLINE_MEDIA=0
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if assembler supports NEON instructions on ARM" >&5
+$as_echo_n "checking if assembler supports NEON instructions on ARM... " >&6; }
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+__asm__("vorr d0,d0,d0")
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ OPUS_ARM_INLINE_NEON=1
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ OPUS_ARM_INLINE_NEON=0
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+ if test x"$inline_optimization" = x"ARM"; then :
+
+ if true; then
+ OPUS_ARM_INLINE_ASM_TRUE=
+ OPUS_ARM_INLINE_ASM_FALSE='#'
+else
+ OPUS_ARM_INLINE_ASM_TRUE='#'
+ OPUS_ARM_INLINE_ASM_FALSE=
+fi
+
+
+$as_echo "#define OPUS_ARM_INLINE_ASM 1" >>confdefs.h
+
+ if test x"$OPUS_ARM_INLINE_EDSP" = x"1"; then :
+
+
+$as_echo "#define OPUS_ARM_INLINE_EDSP 1" >>confdefs.h
+
+ inline_optimization="$inline_optimization (EDSP)"
+
+fi
+ if test x"$OPUS_ARM_INLINE_MEDIA" = x"1"; then :
+
+
+$as_echo "#define OPUS_ARM_INLINE_MEDIA 1" >>confdefs.h
+
+ inline_optimization="$inline_optimization (Media)"
+
+fi
+ if test x"$OPUS_ARM_INLINE_NEON" = x"1"; then :
+
+
+$as_echo "#define OPUS_ARM_INLINE_NEON 1" >>confdefs.h
+
+ inline_optimization="$inline_optimization (NEON)"
+
+fi
+
+fi
+ # Extract the first word of "perl", so it can be a program name with args.
+set dummy perl; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_HAVE_PERL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$HAVE_PERL"; then
+ ac_cv_prog_HAVE_PERL="$HAVE_PERL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
+ ac_cv_prog_HAVE_PERL="yes"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+ test -z "$ac_cv_prog_HAVE_PERL" && ac_cv_prog_HAVE_PERL="no"
+fi
+fi
+HAVE_PERL=$ac_cv_prog_HAVE_PERL
+if test -n "$HAVE_PERL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $HAVE_PERL" >&5
+$as_echo "$HAVE_PERL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ if test x"$HAVE_PERL" = x"yes"; then :
+
+ if true; then
+ OPUS_ARM_EXTERNAL_ASM_TRUE=
+ OPUS_ARM_EXTERNAL_ASM_FALSE='#'
+else
+ OPUS_ARM_EXTERNAL_ASM_TRUE='#'
+ OPUS_ARM_EXTERNAL_ASM_FALSE=
+fi
+
+ asm_optimization="ARM"
+ if test x"$OPUS_ARM_INLINE_EDSP" = x"1"; then :
+
+ OPUS_ARM_PRESUME_EDSP=1
+ OPUS_ARM_MAY_HAVE_EDSP=1
+
+else
+
+ OPUS_ARM_PRESUME_EDSP=0
+ OPUS_ARM_MAY_HAVE_EDSP=0
+
+fi
+ if test x"$OPUS_ARM_INLINE_MEDIA" = x"1"; then :
+
+ OPUS_ARM_PRESUME_MEDIA=1
+ OPUS_ARM_MAY_HAVE_MEDIA=1
+
+else
+
+ OPUS_ARM_PRESUME_MEDIA=0
+ OPUS_ARM_MAY_HAVE_MEDIA=0
+
+fi
+ if test x"$OPUS_ARM_INLINE_NEON" = x"1"; then :
+
+ OPUS_ARM_PRESUME_NEON=1
+ OPUS_ARM_MAY_HAVE_NEON=1
+
+else
+
+ OPUS_ARM_PRESUME_NEON=0
+ OPUS_ARM_MAY_HAVE_NEON=0
+
+fi
+ if test x"$enable_rtcd" = x"yes"; then :
+
+ if test x"$OPUS_ARM_MAY_HAVE_EDSP" != x"1"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Trying to force-enable armv5e EDSP instructions..." >&5
+$as_echo "$as_me: Trying to force-enable armv5e EDSP instructions..." >&6;}
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if assembler supports EDSP instructions on ARM" >&5
+$as_echo_n "checking if assembler supports EDSP instructions on ARM... " >&6; }
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+__asm__(".arch armv5te\n.object_arch armv4t\nqadd r3,r3,r3")
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ OPUS_ARM_MAY_HAVE_EDSP=1
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
+fi
+ if test x"$OPUS_ARM_MAY_HAVE_MEDIA" != x"1"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Trying to force-enable ARMv6 media instructions..." >&5
+$as_echo "$as_me: Trying to force-enable ARMv6 media instructions..." >&6;}
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if assembler supports ARMv6 media instructions on ARM" >&5
+$as_echo_n "checking if assembler supports ARMv6 media instructions on ARM... " >&6; }
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+__asm__(".arch armv6\n.object_arch armv4t\nshadd8 r3,r3,r3")
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ OPUS_ARM_MAY_HAVE_MEDIA=1
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
+fi
+ if test x"$OPUS_ARM_MAY_HAVE_NEON" != x"1"; then :
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: Trying to force-enable NEON instructions..." >&5
+$as_echo "$as_me: Trying to force-enable NEON instructions..." >&6;}
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if assembler supports NEON instructions on ARM" >&5
+$as_echo_n "checking if assembler supports NEON instructions on ARM... " >&6; }
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+__asm__(".arch armv7-a\n.fpu neon\n.object_arch armv4t\nvorr d0,d0,d0")
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ OPUS_ARM_MAY_HAVE_NEON=1
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+
+fi
+
+fi
+ rtcd_support=
+ if test x"$OPUS_ARM_MAY_HAVE_EDSP" = x"1"; then :
+
+
+$as_echo "#define OPUS_ARM_MAY_HAVE_EDSP 1" >>confdefs.h
+
+ if test x"$OPUS_ARM_PRESUME_EDSP" = x"1"; then :
+
+
+$as_echo "#define OPUS_ARM_PRESUME_EDSP 1" >>confdefs.h
+
+ asm_optimization="$asm_optimization (EDSP)"
+
+else
+ rtcd_support="$rtcd_support (EDSP)"
+
+fi
+
+fi
+
+ if test x"$OPUS_ARM_MAY_HAVE_MEDIA" = x"1"; then :
+
+
+$as_echo "#define OPUS_ARM_MAY_HAVE_MEDIA 1" >>confdefs.h
+
+ if test x"$OPUS_ARM_PRESUME_MEDIA" = x"1"; then :
+
+
+$as_echo "#define OPUS_ARM_PRESUME_MEDIA 1" >>confdefs.h
+
+ asm_optimization="$asm_optimization (Media)"
+
+else
+ rtcd_support="$rtcd_support (Media)"
+
+fi
+
+fi
+
+ if test x"$OPUS_ARM_MAY_HAVE_NEON" = x"1"; then :
+
+
+$as_echo "#define OPUS_ARM_MAY_HAVE_NEON 1" >>confdefs.h
+
+ if test x"$OPUS_ARM_PRESUME_NEON" = x"1"; then :
+
+
+$as_echo "#define OPUS_ARM_PRESUME_NEON 1" >>confdefs.h
+
+ asm_optimization="$asm_optimization (NEON)"
+
+else
+ rtcd_support="$rtcd_support (NEON)"
+
+fi
+
+fi
+
+ if test x"$rtcd_support" != x""; then :
+ rtcd_support=ARM"$rtcd_support"
+else
+ rtcd_support="no"
+
+fi
+
+else
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: *** ARM assembly requires perl -- disabling optimizations" >&5
+$as_echo "$as_me: WARNING: *** ARM assembly requires perl -- disabling optimizations" >&2;}
+ asm_optimization="(missing perl dependency for ARM)"
+
+fi
+
+fi
+ ;;
+ esac
+
+else
+
+ inline_optimization="disabled"
+ asm_optimization="disabled"
+
+fi
+
+ if test "$cpu_arm" = "yes"; then
+ CPU_ARM_TRUE=
+ CPU_ARM_FALSE='#'
+else
+ CPU_ARM_TRUE='#'
+ CPU_ARM_FALSE=
+fi
+
+ if test x"${inline_optimization:0:3}" = x"ARM"; then
+ OPUS_ARM_INLINE_ASM_TRUE=
+ OPUS_ARM_INLINE_ASM_FALSE='#'
+else
+ OPUS_ARM_INLINE_ASM_TRUE='#'
+ OPUS_ARM_INLINE_ASM_FALSE=
+fi
+
+ if test x"${asm_optimization:0:3}" = x"ARM"; then
+ OPUS_ARM_EXTERNAL_ASM_TRUE=
+ OPUS_ARM_EXTERNAL_ASM_FALSE='#'
+else
+ OPUS_ARM_EXTERNAL_ASM_TRUE='#'
+ OPUS_ARM_EXTERNAL_ASM_FALSE=
+fi
+
+
+if test x"$enable_rtcd" = x"yes"; then :
+
+ if test x"$rtcd_support" != x"no"; then :
+
+
+$as_echo "#define OPUS_HAVE_RTCD 1" >>confdefs.h
+
+ OPUS_HAVE_RTCD=1
+
+
+fi
+
+else
+
+ rtcd_support="disabled"
+
+fi
+
# Check whether --enable-assertions was given.
if test "${enable_assertions+set}" = set; then :
- enableval=$enable_assertions; if test "$enableval" = yes; then
- ac_enable_assertions="yes"
-
-$as_echo "#define ENABLE_ASSERTIONS /**/" >>confdefs.h
-
-fi
+ enableval=$enable_assertions;
+else
+ enable_assertions=no
fi
-ac_enable_fuzzing="no"
+if test "$enable_assertions" = "yes"; then :
+
+
+$as_echo "#define ENABLE_ASSERTIONS 1" >>confdefs.h
+
+
+fi
+
# Check whether --enable-fuzzing was given.
if test "${enable_fuzzing+set}" = set; then :
- enableval=$enable_fuzzing; if test "$enableval" = yes; then
- ac_enable_fuzzing="yes"
-
-$as_echo "#define FUZZING /**/" >>confdefs.h
-
-fi
+ enableval=$enable_fuzzing;
+else
+ enable_fuzzing=no
fi
-ac_enable_doc="yes"
+if test "$enable_fuzzing" = "yes"; then :
+
+
+$as_echo "#define FUZZING 1" >>confdefs.h
+
+
+fi
+
# Check whether --enable-doc was given.
if test "${enable_doc+set}" = set; then :
- enableval=$enable_doc; ac_enable_doc=$enableval
+ enableval=$enable_doc;
+else
+ enable_doc=yes
fi
-# Extract the first word of "doxygen", so it can be a program name with args.
+
+if test "$enable_doc" = "yes"; then :
+
+ # Extract the first word of "doxygen", so it can be a program name with args.
set dummy doxygen; ac_word=$2
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
$as_echo_n "checking for $ac_word... " >&6; }
@@ -12323,11 +12922,14 @@
fi
-if test "$HAVE_DOXYGEN" != "yes" -o "$ac_enable_doc" != "yes"; then
- HAVE_DOXYGEN="false"
- ac_enable_doc="no"
+
+else
+
+ HAVE_DOXYGEN=no
+
fi
- if test $HAVE_DOXYGEN = yes; then
+
+ if test "$HAVE_DOXYGEN" = "yes"; then
HAVE_DOXYGEN_TRUE=
HAVE_DOXYGEN_FALSE='#'
else
@@ -12336,6 +12938,24 @@
fi
+# Check whether --enable-extra-programs was given.
+if test "${enable_extra_programs+set}" = set; then :
+ enableval=$enable_extra_programs;
+else
+ enable_extra_programs=yes
+fi
+
+
+ if test "$enable_extra_programs" = "yes"; then
+ EXTRA_PROGRAMS_TRUE=
+ EXTRA_PROGRAMS_FALSE='#'
+else
+ EXTRA_PROGRAMS_TRUE='#'
+ EXTRA_PROGRAMS_FALSE=
+fi
+
+
+
saved_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -fvisibility=hidden"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if ${CC} supports -fvisibility=hidden" >&5
@@ -12347,21 +12967,21 @@
if ac_fn_c_try_compile "$LINENO"; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
- SYMBOL_VISIBILITY="-fvisibility=hidden"
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
+ CFLAGS="$saved_CFLAGS"
+
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-CFLAGS="$saved_CFLAGS $SYMBOL_VISIBILITY"
-
CFLAGS="$CFLAGS -W"
+warn_CFLAGS="-Wall -Wextra -Wcast-align -Wnested-externs -Wshadow -Wstrict-prototypes"
saved_CFLAGS="$CFLAGS"
-CFLAGS="$CFLAGS -Wall -Wextra -Wcast-align -Wnested-externs -Wshadow -Wstrict-prototypes"
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if ${CC} supports -Wall -Wextra -Wcast-align -Wnested-externs -Wshadow -Wstrict-prototypes" >&5
-$as_echo_n "checking if ${CC} supports -Wall -Wextra -Wcast-align -Wnested-externs -Wshadow -Wstrict-prototypes... " >&6; }
+CFLAGS="$CFLAGS $warn_CFLAGS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if ${CC} supports ${warn_CFLAGS}" >&5
+$as_echo_n "checking if ${CC} supports ${warn_CFLAGS}... " >&6; }
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
char foo;
@@ -12369,14 +12989,16 @@
if ac_fn_c_try_compile "$LINENO"; then :
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
$as_echo "yes" >&6; }
- EXTRA_WARNS="-Wall -Wextra -Wcast-align -Wnested-externs -Wshadow -Wstrict-prototypes"
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
$as_echo "no" >&6; }
+ CFLAGS="$saved_CFLAGS"
+
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
-CFLAGS="$saved_CFLAGS $EXTRA_WARNS"
+saved_LIBS="$LIBS"
+LIBS="$LIBS $LIBM"
for ac_func in lrintf
do :
ac_fn_c_check_func "$LINENO" "lrintf" "ac_cv_func_lrintf"
@@ -12399,6 +13021,8 @@
fi
done
+LIBS="$saved_LIBS"
+
for ac_func in __malloc_hook
do :
ac_fn_c_check_func "$LINENO" "__malloc_hook" "ac_cv_func___malloc_hook"
@@ -12411,201 +13035,11 @@
done
-# The cast to long int works around a bug in the HP C Compiler
-# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-# This bug is HP SR number 8606223364.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of short" >&5
-$as_echo_n "checking size of short... " >&6; }
-if ${ac_cv_sizeof_short+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (short))" "ac_cv_sizeof_short" "$ac_includes_default"; then :
-
-else
- if test "$ac_cv_type_short" = yes; then
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "cannot compute sizeof (short)
-See \`config.log' for more details" "$LINENO" 5; }
- else
- ac_cv_sizeof_short=0
- fi
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_short" >&5
-$as_echo "$ac_cv_sizeof_short" >&6; }
+ac_config_files="$ac_config_files Makefile opus.pc opus-uninstalled.pc celt/arm/armopts.s doc/Makefile doc/Doxyfile"
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_SHORT $ac_cv_sizeof_short
-_ACEOF
-
-
-# The cast to long int works around a bug in the HP C Compiler
-# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-# This bug is HP SR number 8606223364.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of int" >&5
-$as_echo_n "checking size of int... " >&6; }
-if ${ac_cv_sizeof_int+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (int))" "ac_cv_sizeof_int" "$ac_includes_default"; then :
-
-else
- if test "$ac_cv_type_int" = yes; then
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "cannot compute sizeof (int)
-See \`config.log' for more details" "$LINENO" 5; }
- else
- ac_cv_sizeof_int=0
- fi
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_int" >&5
-$as_echo "$ac_cv_sizeof_int" >&6; }
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_INT $ac_cv_sizeof_int
-_ACEOF
-
-
-# The cast to long int works around a bug in the HP C Compiler
-# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-# This bug is HP SR number 8606223364.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long" >&5
-$as_echo_n "checking size of long... " >&6; }
-if ${ac_cv_sizeof_long+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long))" "ac_cv_sizeof_long" "$ac_includes_default"; then :
-
-else
- if test "$ac_cv_type_long" = yes; then
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "cannot compute sizeof (long)
-See \`config.log' for more details" "$LINENO" 5; }
- else
- ac_cv_sizeof_long=0
- fi
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long" >&5
-$as_echo "$ac_cv_sizeof_long" >&6; }
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_LONG $ac_cv_sizeof_long
-_ACEOF
-
-
-# The cast to long int works around a bug in the HP C Compiler
-# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
-# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
-# This bug is HP SR number 8606223364.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking size of long long" >&5
-$as_echo_n "checking size of long long... " >&6; }
-if ${ac_cv_sizeof_long_long+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if ac_fn_c_compute_int "$LINENO" "(long int) (sizeof (long long))" "ac_cv_sizeof_long_long" "$ac_includes_default"; then :
-
-else
- if test "$ac_cv_type_long_long" = yes; then
- { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
-$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
-as_fn_error 77 "cannot compute sizeof (long long)
-See \`config.log' for more details" "$LINENO" 5; }
- else
- ac_cv_sizeof_long_long=0
- fi
-fi
-
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_sizeof_long_long" >&5
-$as_echo "$ac_cv_sizeof_long_long" >&6; }
-
-
-
-cat >>confdefs.h <<_ACEOF
-#define SIZEOF_LONG_LONG $ac_cv_sizeof_long_long
-_ACEOF
-
-
-
-if test x$has_char16 = "xyes" ; then
- case 1 in
- $ac_cv_sizeof_short) SIZE16="short";;
- $ac_cv_sizeof_int) SIZE16="int";;
- esac
-else
- case 2 in
- $ac_cv_sizeof_short) SIZE16="short";;
- $ac_cv_sizeof_int) SIZE16="int";;
- esac
-fi
-
-if test x$has_char16 = "xyes" ; then
- case 2 in
- $ac_cv_sizeof_int) SIZE32="int";;
- $ac_cv_sizeof_long) SIZE32="long";;
- $ac_cv_sizeof_short) SIZE32="short";;
- esac
-else
- case 4 in
- $ac_cv_sizeof_int) SIZE32="int";;
- $ac_cv_sizeof_long) SIZE32="long";;
- $ac_cv_sizeof_short) SIZE32="short";;
- esac
-fi
-
-
-
-
- if test x$ac_enable_fixed = xyes; then
- FIXED_POINT_TRUE=
- FIXED_POINT_FALSE='#'
-else
- FIXED_POINT_TRUE='#'
- FIXED_POINT_FALSE=
-fi
-
- if test x$ac_enable_custom_modes = xyes; then
- CUSTOM_MODES_TRUE=
- CUSTOM_MODES_FALSE='#'
-else
- CUSTOM_MODES_TRUE='#'
- CUSTOM_MODES_FALSE=
-fi
-
-
-if test x$ac_enable_float = xyes; then
- PC_BUILD="floating-point"
- PC_LIBM=$LIBM
-else
- PC_BUILD="fixed-point"
- PC_LIBM=
-fi
-if test x$ac_enable_custom_modes = xyes; then
- PC_BUILD="${PC_BUILD}, custom modes"
- PC_LIBM=$LIBM
-fi
-
-
-
-
-ac_config_files="$ac_config_files Makefile opus.pc opus-uninstalled.pc doc/Makefile doc/Doxyfile"
+ac_config_headers="$ac_config_headers config.h"
cat >confcache <<\_ACEOF
@@ -12737,18 +13171,50 @@
as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
-if test -z "${HAVE_DOXYGEN_TRUE}" && test -z "${HAVE_DOXYGEN_FALSE}"; then
- as_fn_error $? "conditional \"HAVE_DOXYGEN\" was never defined.
+if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCCAS\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${FIXED_POINT_TRUE}" && test -z "${FIXED_POINT_FALSE}"; then
as_fn_error $? "conditional \"FIXED_POINT\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
+if test -z "${DISABLE_FLOAT_API_TRUE}" && test -z "${DISABLE_FLOAT_API_FALSE}"; then
+ as_fn_error $? "conditional \"DISABLE_FLOAT_API\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
if test -z "${CUSTOM_MODES_TRUE}" && test -z "${CUSTOM_MODES_FALSE}"; then
as_fn_error $? "conditional \"CUSTOM_MODES\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
+if test -z "${OPUS_ARM_INLINE_ASM_TRUE}" && test -z "${OPUS_ARM_INLINE_ASM_FALSE}"; then
+ as_fn_error $? "conditional \"OPUS_ARM_INLINE_ASM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${OPUS_ARM_EXTERNAL_ASM_TRUE}" && test -z "${OPUS_ARM_EXTERNAL_ASM_FALSE}"; then
+ as_fn_error $? "conditional \"OPUS_ARM_EXTERNAL_ASM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${CPU_ARM_TRUE}" && test -z "${CPU_ARM_FALSE}"; then
+ as_fn_error $? "conditional \"CPU_ARM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${OPUS_ARM_INLINE_ASM_TRUE}" && test -z "${OPUS_ARM_INLINE_ASM_FALSE}"; then
+ as_fn_error $? "conditional \"OPUS_ARM_INLINE_ASM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${OPUS_ARM_EXTERNAL_ASM_TRUE}" && test -z "${OPUS_ARM_EXTERNAL_ASM_FALSE}"; then
+ as_fn_error $? "conditional \"OPUS_ARM_EXTERNAL_ASM\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_DOXYGEN_TRUE}" && test -z "${HAVE_DOXYGEN_FALSE}"; then
+ as_fn_error $? "conditional \"HAVE_DOXYGEN\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${EXTRA_PROGRAMS_TRUE}" && test -z "${EXTRA_PROGRAMS_FALSE}"; then
+ as_fn_error $? "conditional \"EXTRA_PROGRAMS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
: "${CONFIG_STATUS=./config.status}"
ac_write_fail=0
@@ -13158,7 +13624,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by $as_me, which was
+This file was extended by opus $as_me 1.1, which was
generated by GNU Autoconf 2.68. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -13218,13 +13684,13 @@
Configuration commands:
$config_commands
-Report bugs to the package provider."
+Report bugs to <[email protected]>."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
ac_cs_version="\\
-config.status
+opus config.status 1.1
configured by $0, generated by GNU Autoconf 2.68,
with options \\"\$ac_cs_config\\"
@@ -13630,14 +14096,15 @@
for ac_config_target in $ac_config_targets
do
case $ac_config_target in
- "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
"depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
"libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
"opus.pc") CONFIG_FILES="$CONFIG_FILES opus.pc" ;;
"opus-uninstalled.pc") CONFIG_FILES="$CONFIG_FILES opus-uninstalled.pc" ;;
+ "celt/arm/armopts.s") CONFIG_FILES="$CONFIG_FILES celt/arm/armopts.s" ;;
"doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
"doc/Doxyfile") CONFIG_FILES="$CONFIG_FILES doc/Doxyfile" ;;
+ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
*) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
esac
@@ -14997,50 +15464,62 @@
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result:
+{ $as_echo "$as_me:${as_lineno-$LINENO}:
------------------------------------------------------------------------
- $PACKAGE $VERSION: Automatic configuration OK.
+ $PACKAGE_NAME $PACKAGE_VERSION: Automatic configuration OK.
Compiler support:
C99 var arrays: ................ ${has_var_arrays}
C99 lrintf: .................... ${ac_cv_func_lrintf}
- Alloca: ........................ ${has_alloca}
+ Use alloca: .................... ${use_alloca}
General configuration:
- Floating point support: ........ ${ac_enable_float}
- Fast float approximations: ..... ${float_approx}
- Fixed point debugging: ......... ${ac_enable_fixed_debug}
- Custom modes: .................. ${ac_enable_custom_modes}
- Assertion checking: ............ ${ac_enable_assertions}
- Fuzzing: ....................... ${ac_enable_fuzzing}
+ Floating point support: ........ ${enable_float}
+ Fast float approximations: ..... ${enable_float_approx}
+ Fixed point debugging: ......... ${enable_fixed_point_debug}
+ Inline Assembly Optimizations: . ${inline_optimization}
+ External Assembly Optimizations: ${asm_optimization}
+ Run-time CPU detection: ........ ${rtcd_support}
+ Custom modes: .................. ${enable_custom_modes}
+ Assertion checking: ............ ${enable_assertions}
+ Fuzzing: ....................... ${enable_fuzzing}
- API documentation: ............. ${ac_enable_doc}
+ API documentation: ............. ${enable_doc}
+ Extra programs: ................ ${enable_extra_programs}
------------------------------------------------------------------------
+
+ Type \"make; make install\" to compile and install
+ Type \"make check\" to run the test suite
" >&5
-$as_echo "
+$as_echo "$as_me:
------------------------------------------------------------------------
- $PACKAGE $VERSION: Automatic configuration OK.
+ $PACKAGE_NAME $PACKAGE_VERSION: Automatic configuration OK.
Compiler support:
C99 var arrays: ................ ${has_var_arrays}
C99 lrintf: .................... ${ac_cv_func_lrintf}
- Alloca: ........................ ${has_alloca}
+ Use alloca: .................... ${use_alloca}
General configuration:
- Floating point support: ........ ${ac_enable_float}
- Fast float approximations: ..... ${float_approx}
- Fixed point debugging: ......... ${ac_enable_fixed_debug}
- Custom modes: .................. ${ac_enable_custom_modes}
- Assertion checking: ............ ${ac_enable_assertions}
- Fuzzing: ....................... ${ac_enable_fuzzing}
+ Floating point support: ........ ${enable_float}
+ Fast float approximations: ..... ${enable_float_approx}
+ Fixed point debugging: ......... ${enable_fixed_point_debug}
+ Inline Assembly Optimizations: . ${inline_optimization}
+ External Assembly Optimizations: ${asm_optimization}
+ Run-time CPU detection: ........ ${rtcd_support}
+ Custom modes: .................. ${enable_custom_modes}
+ Assertion checking: ............ ${enable_assertions}
+ Fuzzing: ....................... ${enable_fuzzing}
- API documentation: ............. ${ac_enable_doc}
+ API documentation: ............. ${enable_doc}
+ Extra programs: ................ ${enable_extra_programs}
------------------------------------------------------------------------
-" >&6; }
-echo "Type \"make; make install\" to compile and install";
-echo "Type \"make check\" to run the test suite";
+ Type \"make; make install\" to compile and install
+ Type \"make check\" to run the test suite
+" >&6;}
+
diff --git a/configure.ac b/configure.ac
index 2d4896b..0ba4a80 100644
--- a/configure.ac
+++ b/configure.ac
@@ -22,9 +22,9 @@
# For libtool.
dnl Please update these for releases.
-OPUS_LT_CURRENT=4
+OPUS_LT_CURRENT=5
OPUS_LT_REVISION=0
-OPUS_LT_AGE=4
+OPUS_LT_AGE=5
AC_SUBST(OPUS_LT_CURRENT)
AC_SUBST(OPUS_LT_REVISION)
@@ -42,6 +42,8 @@
AC_C_CONST
AC_C_INLINE
+AM_PROG_AS
+
AC_DEFINE([OPUS_BUILD], [], [This is a build of OPUS])
#Use a hacked up version of autoconf's AC_C_RESTRICT because it's not
@@ -54,13 +56,13 @@
for ac_kw in __restrict __restrict__ _Restrict restrict; do
AC_COMPILE_IFELSE([AC_LANG_PROGRAM(
[[typedef int * int_ptr;
- int foo (int_ptr $ac_kw ip, int * $ac_kw baz[]) {
- return ip[0];
+ int foo (int_ptr $ac_kw ip, int * $ac_kw baz[]) {
+ return ip[0];
}]],
[[int s[1];
- int * $ac_kw t = s;
- t[0] = 0;
- return foo(t, (void *)0)]])],
+ int * $ac_kw t = s;
+ t[0] = 0;
+ return foo(t, (void *)0)]])],
[ac_cv_c_restrict=$ac_kw])
test "$ac_cv_c_restrict" != no && break
done
@@ -138,6 +140,17 @@
AC_DEFINE([FIXED_DEBUG], [1], [Debug fixed-point implementation])
])
+AC_ARG_ENABLE([float_api],
+ [AS_HELP_STRING([--disable-float-api],
+ [compile without the floating point API (for machines with no float library)])],,
+ [enable_float_api=yes])
+
+AM_CONDITIONAL([DISABLE_FLOAT_API], [test "$enable_float_api" = "no"])
+
+AS_IF([test "$enable_float_api" = "no"],[
+ AC_DEFINE([DISABLE_FLOAT_API], [1], [Do not build the float API])
+])
+
AC_ARG_ENABLE([custom-modes],
[AS_HELP_STRING([--enable-custom-modes], [enable non-Opus modes, e.g. 44.1 kHz & 2^n frames])],,
[enable_custom_modes=no])
@@ -154,7 +167,7 @@
#i[[3456]]86 | x86_64 | powerpc64 | powerpc32 | ia64)
# has_float_approx=yes
# ;;
-#esac
+#esac
AC_ARG_ENABLE([float-approx],
[AS_HELP_STRING([--enable-float-approx], [enable fast approximations for floating point])],
@@ -172,55 +185,167 @@
[AS_HELP_STRING([--disable-asm], [Disable assembly optimizations])],,
[enable_asm=yes])
-rtcd_support=no
-cpu_arm=no
-
-AS_IF([test "$enable_asm" = "yes"],[
- asm_optimization="no asm for your platform, please send patches"
- case $host_cpu in
- arm*)
- cpu_arm=yes
- AS_GCC_INLINE_ASSEMBLY([asm_optimization="ARM"],
- [asm_optimization="disabled"])
- if test "$asm_optimization" = "ARM" ; then
- rtcd_support=yes
- AC_DEFINE([ARMv4_ASM], 1, [Use generic ARMv4 asm optimizations])
- AS_ASM_ARM_EDSP([ARMv5E_ASM=1],[ARMv5E_ASM=0])
- if test "$ARMv5E_ASM" = "1" ; then
- AC_DEFINE([ARMv5E_ASM], [1], [Use ARMv5E asm optimizations])
- asm_optimization="$asm_optimization (EDSP)"
- fi
- AS_ASM_ARM_MEDIA([ARMv6_ASM=1],[ARMv6_ASM=0])
- if test "$ARMv6_ASM" = "1" ; then
- AC_DEFINE([ARMv6_ASM], [1], [Use ARMv6 asm optimizations])
- asm_optimization="$asm_optimization (Media)"
- fi
- AS_ASM_ARM_NEON([ARM_HAVE_NEON=1],[ARM_HAVE_NEON=0])
- if test "$ARM_HAVE_NEON" = "1" ; then
- AC_DEFINE([ARM_HAVE_NEON], 1, [Use ARM NEON optimizations])
- asm_optimization="$asm_optimization (NEON)"
- fi
- fi
- ;;
- esac
-],[
- asm_optimization="disabled"
-])
-
-AM_CONDITIONAL([CPU_ARM], [test "$cpu_arm" = "yes"])
-
AC_ARG_ENABLE([rtcd],
[AS_HELP_STRING([--disable-rtcd], [Disable run-time CPU capabilities detection])],,
[enable_rtcd=yes])
-AS_IF([test "$enable_rtcd" = "yes"],[
- AS_IF([test "$rtcd_support" = "yes"],[
- AC_DEFINE([OPUS_HAVE_RTCD], [1], [Use run-time CPU capabilities detection])
- ],[
- rtcd_support="no rtcd for your platform, please send patches"
+rtcd_support=no
+cpu_arm=no
+
+AS_IF([test x"${enable_asm}" = x"yes"],[
+ inline_optimization="No ASM for your platform, please send patches"
+ case $host_cpu in
+ arm*)
+ dnl Currently we only have asm for fixed-point
+ AS_IF([test "$enable_float" != "yes"],[
+ cpu_arm=yes
+ AC_DEFINE([OPUS_ARM_ASM], [], [Make use of ARM asm optimization])
+ AS_GCC_INLINE_ASSEMBLY(
+ [inline_optimization="ARM"],
+ [inline_optimization="disabled"]
+ )
+ AS_ASM_ARM_EDSP([OPUS_ARM_INLINE_EDSP=1],[OPUS_ARM_INLINE_EDSP=0])
+ AS_ASM_ARM_MEDIA([OPUS_ARM_INLINE_MEDIA=1],
+ [OPUS_ARM_INLINE_MEDIA=0])
+ AS_ASM_ARM_NEON([OPUS_ARM_INLINE_NEON=1],[OPUS_ARM_INLINE_NEON=0])
+ AS_IF([test x"$inline_optimization" = x"ARM"],[
+ AM_CONDITIONAL([OPUS_ARM_INLINE_ASM],[true])
+ AC_DEFINE([OPUS_ARM_INLINE_ASM], 1,
+ [Use generic ARMv4 inline asm optimizations])
+ AS_IF([test x"$OPUS_ARM_INLINE_EDSP" = x"1"],[
+ AC_DEFINE([OPUS_ARM_INLINE_EDSP], [1],
+ [Use ARMv5E inline asm optimizations])
+ inline_optimization="$inline_optimization (EDSP)"
+ ])
+ AS_IF([test x"$OPUS_ARM_INLINE_MEDIA" = x"1"],[
+ AC_DEFINE([OPUS_ARM_INLINE_MEDIA], [1],
+ [Use ARMv6 inline asm optimizations])
+ inline_optimization="$inline_optimization (Media)"
+ ])
+ AS_IF([test x"$OPUS_ARM_INLINE_NEON" = x"1"],[
+ AC_DEFINE([OPUS_ARM_INLINE_NEON], 1,
+ [Use ARM NEON inline asm optimizations])
+ inline_optimization="$inline_optimization (NEON)"
+ ])
+ ])
+ dnl We need Perl to translate RVCT-syntax asm to gas syntax.
+ AC_CHECK_PROG([HAVE_PERL], perl, yes, no)
+ AS_IF([test x"$HAVE_PERL" = x"yes"],[
+ AM_CONDITIONAL([OPUS_ARM_EXTERNAL_ASM],[true])
+ asm_optimization="ARM"
+ AS_IF([test x"$OPUS_ARM_INLINE_EDSP" = x"1"], [
+ OPUS_ARM_PRESUME_EDSP=1
+ OPUS_ARM_MAY_HAVE_EDSP=1
+ ],
+ [
+ OPUS_ARM_PRESUME_EDSP=0
+ OPUS_ARM_MAY_HAVE_EDSP=0
+ ])
+ AS_IF([test x"$OPUS_ARM_INLINE_MEDIA" = x"1"], [
+ OPUS_ARM_PRESUME_MEDIA=1
+ OPUS_ARM_MAY_HAVE_MEDIA=1
+ ],
+ [
+ OPUS_ARM_PRESUME_MEDIA=0
+ OPUS_ARM_MAY_HAVE_MEDIA=0
+ ])
+ AS_IF([test x"$OPUS_ARM_INLINE_NEON" = x"1"], [
+ OPUS_ARM_PRESUME_NEON=1
+ OPUS_ARM_MAY_HAVE_NEON=1
+ ],
+ [
+ OPUS_ARM_PRESUME_NEON=0
+ OPUS_ARM_MAY_HAVE_NEON=0
+ ])
+ AS_IF([test x"$enable_rtcd" = x"yes"],[
+ AS_IF([test x"$OPUS_ARM_MAY_HAVE_EDSP" != x"1"],[
+ AC_MSG_NOTICE(
+ [Trying to force-enable armv5e EDSP instructions...])
+ AS_ASM_ARM_EDSP_FORCE([OPUS_ARM_MAY_HAVE_EDSP=1])
+ ])
+ AS_IF([test x"$OPUS_ARM_MAY_HAVE_MEDIA" != x"1"],[
+ AC_MSG_NOTICE(
+ [Trying to force-enable ARMv6 media instructions...])
+ AS_ASM_ARM_MEDIA_FORCE([OPUS_ARM_MAY_HAVE_MEDIA=1])
+ ])
+ AS_IF([test x"$OPUS_ARM_MAY_HAVE_NEON" != x"1"],[
+ AC_MSG_NOTICE(
+ [Trying to force-enable NEON instructions...])
+ AS_ASM_ARM_NEON_FORCE([OPUS_ARM_MAY_HAVE_NEON=1])
+ ])
+ ])
+ rtcd_support=
+ AS_IF([test x"$OPUS_ARM_MAY_HAVE_EDSP" = x"1"],[
+ AC_DEFINE(OPUS_ARM_MAY_HAVE_EDSP, 1,
+ [Define if assembler supports EDSP instructions])
+ AS_IF([test x"$OPUS_ARM_PRESUME_EDSP" = x"1"],[
+ AC_DEFINE(OPUS_ARM_PRESUME_EDSP, 1,
+ [Define if binary requires EDSP instruction support])
+ asm_optimization="$asm_optimization (EDSP)"
+ ],
+ [rtcd_support="$rtcd_support (EDSP)"]
+ )
+ ])
+ AC_SUBST(OPUS_ARM_MAY_HAVE_EDSP)
+ AS_IF([test x"$OPUS_ARM_MAY_HAVE_MEDIA" = x"1"],[
+ AC_DEFINE(OPUS_ARM_MAY_HAVE_MEDIA, 1,
+ [Define if assembler supports ARMv6 media instructions])
+ AS_IF([test x"$OPUS_ARM_PRESUME_MEDIA" = x"1"],[
+ AC_DEFINE(OPUS_ARM_PRESUME_MEDIA, 1,
+ [Define if binary requires ARMv6 media instruction support])
+ asm_optimization="$asm_optimization (Media)"
+ ],
+ [rtcd_support="$rtcd_support (Media)"]
+ )
+ ])
+ AC_SUBST(OPUS_ARM_MAY_HAVE_MEDIA)
+ AS_IF([test x"$OPUS_ARM_MAY_HAVE_NEON" = x"1"],[
+ AC_DEFINE(OPUS_ARM_MAY_HAVE_NEON, 1,
+ [Define if compiler supports NEON instructions])
+ AS_IF([test x"$OPUS_ARM_PRESUME_NEON" = x"1"], [
+ AC_DEFINE(OPUS_ARM_PRESUME_NEON, 1,
+ [Define if binary requires NEON instruction support])
+ asm_optimization="$asm_optimization (NEON)"
+ ],
+ [rtcd_support="$rtcd_support (NEON)"]
+ )
+ ])
+ AC_SUBST(OPUS_ARM_MAY_HAVE_NEON)
+ dnl Make sure turning on RTCD gets us at least one
+ dnl instruction set.
+ AS_IF([test x"$rtcd_support" != x""],
+ [rtcd_support=ARM"$rtcd_support"],
+ [rtcd_support="no"]
+ )
+ ],
+ [
+ AC_MSG_WARN(
+ [*** ARM assembly requires perl -- disabling optimizations])
+ asm_optimization="(missing perl dependency for ARM)"
+ ])
+ ])
+ ;;
+ esac
+],[
+ inline_optimization="disabled"
+ asm_optimization="disabled"
+])
+
+AM_CONDITIONAL([CPU_ARM], [test "$cpu_arm" = "yes"])
+AM_CONDITIONAL([OPUS_ARM_INLINE_ASM],
+ [test x"${inline_optimization:0:3}" = x"ARM"])
+AM_CONDITIONAL([OPUS_ARM_EXTERNAL_ASM],
+ [test x"${asm_optimization:0:3}" = x"ARM"])
+
+AS_IF([test x"$enable_rtcd" = x"yes"],[
+ AS_IF([test x"$rtcd_support" != x"no"],[
+ AC_DEFINE([OPUS_HAVE_RTCD], [1],
+ [Use run-time CPU capabilities detection])
+ OPUS_HAVE_RTCD=1
+ AC_SUBST(OPUS_HAVE_RTCD)
])
],[
- rtcd_support="no"
+ rtcd_support="disabled"
])
AC_ARG_ENABLE([assertions],
@@ -289,9 +414,14 @@
AC_SUBST([PC_BUILD])
-
-AC_CONFIG_FILES([Makefile opus.pc opus-uninstalled.pc
- doc/Makefile doc/Doxyfile])
+AC_CONFIG_FILES([
+ Makefile
+ opus.pc
+ opus-uninstalled.pc
+ celt/arm/armopts.s
+ doc/Makefile
+ doc/Doxyfile
+])
AC_CONFIG_HEADERS([config.h])
AC_OUTPUT
@@ -305,13 +435,14 @@
C99 var arrays: ................ ${has_var_arrays}
C99 lrintf: .................... ${ac_cv_func_lrintf}
Use alloca: .................... ${use_alloca}
-
+
General configuration:
-
+
Floating point support: ........ ${enable_float}
Fast float approximations: ..... ${enable_float_approx}
Fixed point debugging: ......... ${enable_fixed_point_debug}
- Assembly optimization: ......... ${asm_optimization}
+ Inline Assembly Optimizations: . ${inline_optimization}
+ External Assembly Optimizations: ${asm_optimization}
Run-time CPU detection: ........ ${rtcd_support}
Custom modes: .................. ${enable_custom_modes}
Assertion checking: ............ ${enable_assertions}
diff --git a/doc/Makefile.am b/doc/Makefile.am
index 02f3493..296c4dd 100644
--- a/doc/Makefile.am
+++ b/doc/Makefile.am
@@ -9,7 +9,8 @@
$(top_srcdir)/doc/footer.html \
$(top_srcdir)/doc/customdoxygen.css
-EXTRA_DIST = customdoxygen.css Doxyfile.in footer.html header.html opus_logo.svg
+EXTRA_DIST = customdoxygen.css Doxyfile.in footer.html header.html \
+ opus_logo.svg trivial_example.c
if HAVE_DOXYGEN
diff --git a/doc/Makefile.in b/doc/Makefile.in
index 1eb4436..7f76fd6 100644
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -54,7 +54,10 @@
DIST_COMMON = $(srcdir)/Doxyfile.in $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__aclocal_m4_deps = $(top_srcdir)/m4/as-gcc-inline-assembly.m4 \
+ $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
+ $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \
+ $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
@@ -84,6 +87,9 @@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
@@ -102,6 +108,7 @@
FGREP = @FGREP@
GREP = @GREP@
HAVE_DOXYGEN = @HAVE_DOXYGEN@
+HAVE_PERL = @HAVE_PERL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
@@ -124,10 +131,13 @@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
+OPUS_ARM_MAY_HAVE_EDSP = @OPUS_ARM_MAY_HAVE_EDSP@
+OPUS_ARM_MAY_HAVE_MEDIA = @OPUS_ARM_MAY_HAVE_MEDIA@
+OPUS_ARM_MAY_HAVE_NEON = @OPUS_ARM_MAY_HAVE_NEON@
+OPUS_HAVE_RTCD = @OPUS_HAVE_RTCD@
OPUS_LT_AGE = @OPUS_LT_AGE@
OPUS_LT_CURRENT = @OPUS_LT_CURRENT@
OPUS_LT_REVISION = @OPUS_LT_REVISION@
-OPUS_VERSION = @OPUS_VERSION@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
@@ -139,15 +149,11 @@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PC_BUILD = @PC_BUILD@
-PC_LIBM = @PC_LIBM@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
-SIZE16 = @SIZE16@
-SIZE32 = @SIZE32@
STRIP = @STRIP@
-SYMBOL_VISIBILITY = @SYMBOL_VISIBILITY@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
@@ -210,7 +216,9 @@
$(top_srcdir)/doc/footer.html \
$(top_srcdir)/doc/customdoxygen.css
-EXTRA_DIST = customdoxygen.css Doxyfile.in footer.html header.html opus_logo.svg
+EXTRA_DIST = customdoxygen.css Doxyfile.in footer.html header.html \
+ opus_logo.svg trivial_example.c
+
all: all-am
.SUFFIXES:
@@ -416,8 +424,8 @@
@HAVE_DOXYGEN_TRUE@ touch $@
@HAVE_DOXYGEN_TRUE@install-data-local:
+@HAVE_DOXYGEN_TRUE@ $(INSTALL) -d $(DESTDIR)$(docdir)/html/search
@HAVE_DOXYGEN_TRUE@ for f in `find html -type f \! -name "installdox"`; do \
-@HAVE_DOXYGEN_TRUE@ $(INSTALL) -d $(DESTDIR)$(docdir)/html/search; \
@HAVE_DOXYGEN_TRUE@ $(INSTALL_DATA) $$f $(DESTDIR)$(docdir)/$$f; \
@HAVE_DOXYGEN_TRUE@ done
diff --git a/doc/trivial_example.c b/doc/trivial_example.c
new file mode 100644
index 0000000..7a0fc56
--- /dev/null
+++ b/doc/trivial_example.c
@@ -0,0 +1,160 @@
+/* Copyright (c) 2013 Jean-Marc Valin */
+/*
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+ OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/* This is meant to be a simple example of encoding and decoding audio
+ using Opus. It should make it easy to understand how the Opus API
+ works. For more information, see the full API documentation at:
+ http://www.opus-codec.org/docs/ */
+
+#include <stdlib.h>
+#include <errno.h>
+#include <string.h>
+#include <opus.h>
+#include <stdio.h>
+
+/*The frame size is hardcoded for this sample code but it doesn't have to be*/
+#define FRAME_SIZE 960
+#define SAMPLE_RATE 48000
+#define CHANNELS 2
+#define APPLICATION OPUS_APPLICATION_AUDIO
+#define BITRATE 64000
+
+#define MAX_FRAME_SIZE 6*960
+#define MAX_PACKET_SIZE (3*1276)
+
+int main(int argc, char **argv)
+{
+ char *inFile;
+ FILE *fin;
+ char *outFile;
+ FILE *fout;
+ opus_int16 in[FRAME_SIZE*CHANNELS];
+ opus_int16 out[MAX_FRAME_SIZE*CHANNELS];
+ unsigned char cbits[MAX_PACKET_SIZE];
+ int nbBytes;
+ /*Holds the state of the encoder and decoder */
+ OpusEncoder *encoder;
+ OpusDecoder *decoder;
+ int err;
+
+ if (argc != 3)
+ {
+ fprintf(stderr, "usage: trivial_example input.pcm output.pcm\n");
+ fprintf(stderr, "input and output are 16-bit little-endian raw files\n");
+ return EXIT_FAILURE;
+ }
+
+ /*Create a new encoder state */
+ encoder = opus_encoder_create(SAMPLE_RATE, CHANNELS, APPLICATION, &err);
+ if (err<0)
+ {
+ fprintf(stderr, "failed to create an encoder: %s\n", opus_strerror(err));
+ return EXIT_FAILURE;
+ }
+ /* Set the desired bit-rate. You can also set other parameters if needed.
+ The Opus library is designed to have good defaults, so only set
+ parameters you know you need. Doing otherwise is likely to result
+ in worse quality, but better. */
+ err = opus_encoder_ctl(encoder, OPUS_SET_BITRATE(BITRATE));
+ if (err<0)
+ {
+ fprintf(stderr, "failed to set bitrate: %s\n", opus_strerror(err));
+ return EXIT_FAILURE;
+ }
+ inFile = argv[1];
+ fin = fopen(inFile, "r");
+ if (fin==NULL)
+ {
+ fprintf(stderr, "failed to open file: %s\n", strerror(errno));
+ return EXIT_FAILURE;
+ }
+
+
+ /* Create a new decoder state. */
+ decoder = opus_decoder_create(SAMPLE_RATE, CHANNELS, &err);
+ if (err<0)
+ {
+ fprintf(stderr, "failed to create decoder: %s\n", opus_strerror(err));
+ return EXIT_FAILURE;
+ }
+ outFile = argv[2];
+ fout = fopen(outFile, "w");
+ if (fout==NULL)
+ {
+ fprintf(stderr, "failed to open file: %s\n", strerror(errno));
+ return EXIT_FAILURE;
+ }
+
+ while (1)
+ {
+ int i;
+ unsigned char pcm_bytes[MAX_FRAME_SIZE*CHANNELS*2];
+ int frame_size;
+
+ /* Read a 16 bits/sample audio frame. */
+ fread(pcm_bytes, sizeof(short)*CHANNELS, FRAME_SIZE, fin);
+ if (feof(fin))
+ break;
+ /* Convert from little-endian ordering. */
+ for (i=0;i<CHANNELS*FRAME_SIZE;i++)
+ in[i]=pcm_bytes[2*i+1]<<8|pcm_bytes[2*i];
+
+ /* Encode the frame. */
+ nbBytes = opus_encode(encoder, in, FRAME_SIZE, cbits, MAX_PACKET_SIZE);
+ if (nbBytes<0)
+ {
+ fprintf(stderr, "encode failed: %s\n", opus_strerror(nbBytes));
+ return EXIT_FAILURE;
+ }
+
+
+ /* Decode the data. In this example, frame_size will be constant because
+ the encoder is using a constant frame size. However, that may not
+ be the case for all encoders, so the decoder must always check
+ the frame size returned. */
+ frame_size = opus_decode(decoder, cbits, nbBytes, out, MAX_FRAME_SIZE, 0);
+ if (frame_size<0)
+ {
+ fprintf(stderr, "decoder failed: %s\n", opus_strerror(err));
+ return EXIT_FAILURE;
+ }
+
+ /* Convert to little-endian ordering. */
+ for(i=0;i<CHANNELS*frame_size;i++)
+ {
+ pcm_bytes[2*i]=out[i]&0xFF;
+ pcm_bytes[2*i+1]=(out[i]>>8)&0xFF;
+ }
+ /* Write the decoded audio to file. */
+ fwrite(pcm_bytes, sizeof(short), frame_size*CHANNELS, fout);
+ }
+ /*Destroy the encoder state*/
+ opus_encoder_destroy(encoder);
+ opus_decoder_destroy(decoder);
+ fclose(fin);
+ fclose(fout);
+ return EXIT_SUCCESS;
+}
diff --git a/include/opus.h b/include/opus.h
index 38817b4..93a53a2 100644
--- a/include/opus.h
+++ b/include/opus.h
@@ -911,6 +911,64 @@
*/
OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_repacketizer_out(OpusRepacketizer *rp, unsigned char *data, opus_int32 maxlen) OPUS_ARG_NONNULL(1);
+/** Pads a given Opus packet to a larger size (possibly changing the TOC sequence).
+ * @param[in,out] data <tt>const unsigned char*</tt>: The buffer containing the
+ * packet to pad.
+ * @param len <tt>opus_int32</tt>: The size of the packet.
+ * This must be at least 1.
+ * @param new_len <tt>opus_int32</tt>: The desired size of the packet after padding.
+ * This must be at least as large as len.
+ * @returns an error code
+ * @retval #OPUS_OK \a on success.
+ * @retval #OPUS_BAD_ARG \a len was less than 1 or new_len was less than len.
+ * @retval #OPUS_INVALID_PACKET \a data did not contain a valid Opus packet.
+ */
+OPUS_EXPORT int opus_packet_pad(unsigned char *data, opus_int32 len, opus_int32 new_len);
+
+/** Remove all padding from a given Opus packet and rewrite the TOC sequence to
+ * minimize space usage.
+ * @param[in,out] data <tt>const unsigned char*</tt>: The buffer containing the
+ * packet to strip.
+ * @param len <tt>opus_int32</tt>: The size of the packet.
+ * This must be at least 1.
+ * @returns The new size of the output packet on success, or an error code
+ * on failure.
+ * @retval #OPUS_BAD_ARG \a len was less than 1.
+ * @retval #OPUS_INVALID_PACKET \a data did not contain a valid Opus packet.
+ */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_packet_unpad(unsigned char *data, opus_int32 len);
+
+/** Pads a given Opus multi-stream packet to a larger size (possibly changing the TOC sequence).
+ * @param[in,out] data <tt>const unsigned char*</tt>: The buffer containing the
+ * packet to pad.
+ * @param len <tt>opus_int32</tt>: The size of the packet.
+ * This must be at least 1.
+ * @param new_len <tt>opus_int32</tt>: The desired size of the packet after padding.
+ * This must be at least 1.
+ * @param nb_streams <tt>opus_int32</tt>: The number of streams (not channels) in the packet.
+ * This must be at least as large as len.
+ * @returns an error code
+ * @retval #OPUS_OK \a on success.
+ * @retval #OPUS_BAD_ARG \a len was less than 1.
+ * @retval #OPUS_INVALID_PACKET \a data did not contain a valid Opus packet.
+ */
+OPUS_EXPORT int opus_multistream_packet_pad(unsigned char *data, opus_int32 len, opus_int32 new_len, int nb_streams);
+
+/** Remove all padding from a given Opus multi-stream packet and rewrite the TOC sequence to
+ * minimize space usage.
+ * @param[in,out] data <tt>const unsigned char*</tt>: The buffer containing the
+ * packet to strip.
+ * @param len <tt>opus_int32</tt>: The size of the packet.
+ * This must be at least 1.
+ * @param nb_streams <tt>opus_int32</tt>: The number of streams (not channels) in the packet.
+ * This must be at least 1.
+ * @returns The new size of the output packet on success, or an error code
+ * on failure.
+ * @retval #OPUS_BAD_ARG \a len was less than 1 or new_len was less than len.
+ * @retval #OPUS_INVALID_PACKET \a data did not contain a valid Opus packet.
+ */
+OPUS_EXPORT OPUS_WARN_UNUSED_RESULT opus_int32 opus_multistream_packet_unpad(unsigned char *data, opus_int32 len, int nb_streams);
+
/**@}*/
#ifdef __cplusplus
diff --git a/include/opus_custom.h b/include/opus_custom.h
index 6cf3963..41f36bf 100644
--- a/include/opus_custom.h
+++ b/include/opus_custom.h
@@ -47,7 +47,7 @@
#else
# define OPUS_CUSTOM_EXPORT
# ifdef OPUS_BUILD
-# define OPUS_CUSTOM_EXPORT_STATIC static inline
+# define OPUS_CUSTOM_EXPORT_STATIC static OPUS_INLINE
# else
# define OPUS_CUSTOM_EXPORT_STATIC
# endif
@@ -140,6 +140,7 @@
int channels
) OPUS_ARG_NONNULL(1);
+# ifdef CUSTOM_MODES
/** Initializes a previously allocated encoder state
* The memory pointed to by st must be the size returned by opus_custom_encoder_get_size.
* This is intended for applications which use their own allocator instead of malloc.
@@ -152,12 +153,12 @@
* @param [in] channels <tt>int</tt>: Number of channels
* @return OPUS_OK Success or @ref opus_errorcodes
*/
-OPUS_CUSTOM_EXPORT_STATIC int opus_custom_encoder_init(
+OPUS_CUSTOM_EXPORT int opus_custom_encoder_init(
OpusCustomEncoder *st,
const OpusCustomMode *mode,
int channels
) OPUS_ARG_NONNULL(1) OPUS_ARG_NONNULL(2);
-
+# endif
#endif
diff --git a/include/opus_defines.h b/include/opus_defines.h
index 3474e84..265089f 100644
--- a/include/opus_defines.h
+++ b/include/opus_defines.h
@@ -98,6 +98,18 @@
# define OPUS_RESTRICT restrict
#endif
+#if (!defined(__STDC_VERSION__) || (__STDC_VERSION__ < 199901L) )
+# if OPUS_GNUC_PREREQ(2,7)
+# define OPUS_INLINE __inline__
+# elif (defined(_MSC_VER))
+# define OPUS_INLINE __inline
+# else
+# define OPUS_INLINE
+# endif
+#else
+# define OPUS_INLINE inline
+#endif
+
/**Warning attributes for opus functions
* NONNULL is not used in OPUS_BUILD to avoid the compiler optimizing out
* some paranoid null checks. */
@@ -151,6 +163,8 @@
#define OPUS_GET_LAST_PACKET_DURATION_REQUEST 4039
#define OPUS_SET_EXPERT_FRAME_DURATION_REQUEST 4040
#define OPUS_GET_EXPERT_FRAME_DURATION_REQUEST 4041
+#define OPUS_SET_PREDICTION_DISABLED_REQUEST 4042
+#define OPUS_GET_PREDICTION_DISABLED_REQUEST 4043
/* Don't use 4045, it's already taken by OPUS_GET_GAIN_REQUEST */
@@ -194,7 +208,6 @@
#define OPUS_FRAMESIZE_20_MS 5004 /**< Use 20 ms frames */
#define OPUS_FRAMESIZE_40_MS 5005 /**< Use 40 ms frames */
#define OPUS_FRAMESIZE_60_MS 5006 /**< Use 60 ms frames */
-#define OPUS_FRAMESIZE_VARIABLE 5010 /**< Optimize the frame size dynamically */
/**@}*/
@@ -575,6 +588,14 @@
* @hideinitializer */
#define OPUS_GET_EXPERT_FRAME_DURATION(x) OPUS_GET_EXPERT_FRAME_DURATION_REQUEST, __opus_check_int_ptr(x)
+/** If set to 1, disables almost all use of prediction, making frames almost
+ completely independent. This reduces quality. (default : 0)
+ * @hideinitializer */
+#define OPUS_SET_PREDICTION_DISABLED(x) OPUS_SET_PREDICTION_DISABLED_REQUEST, __opus_check_int(x)
+/** Gets the encoder's configured prediction status.
+ * @hideinitializer */
+#define OPUS_GET_PREDICTION_DISABLED(x) OPUS_GET_PREDICTION_DISABLED_REQUEST, __opus_check_int_ptr(x)
+
/**@}*/
/** @defgroup opus_genericctls Generic CTLs
diff --git a/m4/as-gcc-inline-assembly.m4 b/m4/as-gcc-inline-assembly.m4
index a6c44a5..b0d2da4 100644
--- a/m4/as-gcc-inline-assembly.m4
+++ b/m4/as-gcc-inline-assembly.m4
@@ -42,6 +42,16 @@
$2])
])
+AC_DEFUN([AS_ASM_ARM_NEON_FORCE],
+[
+ AC_MSG_CHECKING([if assembler supports NEON instructions on ARM])
+
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[__asm__(".arch armv7-a\n.fpu neon\n.object_arch armv4t\nvorr d0,d0,d0")])],
+ [AC_MSG_RESULT([yes])
+ $1],
+ [AC_MSG_RESULT([no])
+ $2])
+])
AC_DEFUN([AS_ASM_ARM_MEDIA],
[
@@ -54,6 +64,16 @@
$2])
])
+AC_DEFUN([AS_ASM_ARM_MEDIA_FORCE],
+[
+ AC_MSG_CHECKING([if assembler supports ARMv6 media instructions on ARM])
+
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[__asm__(".arch armv6\n.object_arch armv4t\nshadd8 r3,r3,r3")])],
+ [AC_MSG_RESULT([yes])
+ $1],
+ [AC_MSG_RESULT([no])
+ $2])
+])
AC_DEFUN([AS_ASM_ARM_EDSP],
[
@@ -65,3 +85,14 @@
[AC_MSG_RESULT([no])
$2])
])
+
+AC_DEFUN([AS_ASM_ARM_EDSP_FORCE],
+[
+ AC_MSG_CHECKING([if assembler supports EDSP instructions on ARM])
+
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM([],[__asm__(".arch armv5te\n.object_arch armv4t\nqadd r3,r3,r3")])],
+ [AC_MSG_RESULT([yes])
+ $1],
+ [AC_MSG_RESULT([no])
+ $2])
+])
diff --git a/m4/libtool.m4 b/m4/libtool.m4
new file mode 100644
index 0000000..56666f0
--- /dev/null
+++ b/m4/libtool.m4
@@ -0,0 +1,7986 @@
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
+
+# serial 57 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+ [m4_default([$3],
+ [m4_fatal([Libtool version $1 or higher is required],
+ 63)])],
+ [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+ *\ * | *\ *)
+ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+_LT_SETUP
+
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options which allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+fi
+
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a `.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld="$lt_cv_prog_gnu_ld"
+
+old_CC="$CC"
+old_CFLAGS="$CFLAGS"
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ _LT_PATH_MAGIC
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
+
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from `configure', and `config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
+# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain="$ac_aux_dir/ltmain.sh"
+])# _LT_PROG_LTMAIN
+
+
+## ------------------------------------- ##
+## Accumulate code for creating libtool. ##
+## ------------------------------------- ##
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the `libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+## ------------------------ ##
+## FIXME: Eliminate VARNAME ##
+## ------------------------ ##
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME. Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+ [m4_ifval([$1], [$1], [$2])])
+ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+ m4_ifval([$4],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+ lt_dict_add_subkey([lt_decl_dict], [$2],
+ [tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+ [0], [m4_fatal([$0: too few arguments: $#])],
+ [1], [m4_fatal([$0: too few arguments: $#: $1])],
+ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+ [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_if([$2], [],
+ m4_quote(lt_decl_varnames),
+ m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to `config.status' so that its
+# declaration there will have the same value as in `configure'. VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly. In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags="_LT_TAGS"dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+# # Some comment about what VAR is for.
+# visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+ [description])))[]dnl
+m4_pushdef([_libtool_name],
+ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+ [0], [_libtool_name=[$]$1],
+ [1], [_libtool_name=$lt_[]$1],
+ [2], [_libtool_name=$lt_[]$1],
+ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into `config.status', and then the shell code to quote escape them in
+# for loops in `config.status'. Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+ dnl If the libtool generation code has been placed in $CONFIG_LT,
+ dnl instead of duplicating it all over again into config.status,
+ dnl then we will have config.status run $CONFIG_LT later, so it
+ dnl needs to know what name is stored there:
+ [AC_CONFIG_COMMANDS([libtool],
+ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+ dnl If the libtool generation code is destined for config.status,
+ dnl expand the accumulated commands and init code now:
+ [AC_CONFIG_COMMANDS([libtool],
+ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable. If COMMENT is supplied, it is inserted after the
+# `#!' sequence but before initialization text begins. After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script. The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test $lt_write_fail = 0 && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+lt_cl_silent=false
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+ echo
+ AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+\`$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+
+Report bugs to <[email protected]>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2011 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test $[#] != 0
+do
+ case $[1] in
+ --version | --v* | -V )
+ echo "$lt_cl_version"; exit 0 ;;
+ --help | --h* | -h )
+ echo "$lt_cl_help"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --quiet | --q* | --silent | --s* | -q )
+ lt_cl_silent=: ;;
+
+ -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try \`$[0] --help' for more information.]) ;;
+
+ *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try \`$[0] --help' for more information.]) ;;
+ esac
+ shift
+done
+
+if $lt_cl_silent; then
+ exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure. Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+lt_cl_success=:
+test "$silent" = yes &&
+ lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars. Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+ m4_if(_LT_TAG, [C], [
+ # See if we are running on zsh, and set the options which allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}" ; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile="${ofile}T"
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+
+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+#
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test "X${COLLECT_NAMES+set}" != Xset; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+ _LT_PROG_LTMAIN
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ _LT_PROG_REPLACE_SHELLFNS
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ TIMESTAMP='$TIMESTAMP'
+ RM='$RM'
+ ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+# autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+ [C], [_LT_LANG(C)],
+ [C++], [_LT_LANG(CXX)],
+ [Go], [_LT_LANG(GO)],
+ [Java], [_LT_LANG(GCJ)],
+ [Fortran 77], [_LT_LANG(F77)],
+ [Fortran], [_LT_LANG(FC)],
+ [Windows Resource], [_LT_LANG(RC)],
+ [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+ [_LT_LANG($1)],
+ [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+ [LT_SUPPORTED_TAG([$1])dnl
+ m4_append([_LT_TAGS], [$1 ])dnl
+ m4_define([_LT_LANG_]$1[_enabled], [])dnl
+ _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+m4_ifndef([AC_PROG_GO], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_GO. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+############################################################
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC], [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+ if test -n "$ac_tool_prefix"; then
+ AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+ fi
+fi
+if test -z "$GOC"; then
+ AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [LT_LANG(CXX)],
+ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+ [LT_LANG(F77)],
+ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+ [LT_LANG(FC)],
+ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [m4_ifdef([AC_PROG_GCJ],
+ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([A][M_PROG_GCJ],
+ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([LT_PROG_GCJ],
+ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+ [LT_LANG(GO)],
+ [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+ [LT_LANG(RC)],
+ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+ case $host_os in
+ rhapsody* | darwin*)
+ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+ AC_CHECK_TOOL([LIPO], [lipo], [:])
+ AC_CHECK_TOOL([OTOOL], [otool], [:])
+ AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+ _LT_DECL([], [DSYMUTIL], [1],
+ [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+ _LT_DECL([], [NMEDIT], [1],
+ [Tool to change global to local symbols on Mac OS X])
+ _LT_DECL([], [LIPO], [1],
+ [Tool to manipulate fat objects and archives on Mac OS X])
+ _LT_DECL([], [OTOOL], [1],
+ [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+ _LT_DECL([], [OTOOL64], [1],
+ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+ [lt_cv_apple_cc_single_mod=no
+ if test -z "${LT_MULTI_MODULE}"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ # If there is a non-empty error log, and "single_module"
+ # appears in it, assume the flag caused a linker warning
+ if test -s conftest.err && $GREP single_module conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ # Otherwise, if the output was created with a 0 exit code from
+ # the compiler, it worked.
+ elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi])
+
+ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+ [lt_cv_ld_exported_symbols_list],
+ [lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [lt_cv_ld_exported_symbols_list=yes],
+ [lt_cv_ld_exported_symbols_list=no])
+ LDFLAGS="$save_LDFLAGS"
+ ])
+
+ AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+ [lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -s conftest.err && $GREP force_load conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+ ])
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]]*)
+ _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
+ _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ fi
+ if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+ m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ if test "$lt_cv_ld_force_load" = "yes"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+ [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ case $cc_basename in
+ ifort*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test "$_lt_dar_can_shared" = "yes"; then
+ output_verbose_link_cmd=func_echo_all
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ m4_if([$1], [CXX],
+[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+ fi
+],[])
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+if test "${lt_cv_aix_libpath+set}" = set; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+ lt_aix_libpath_sed='[
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }]'
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi],[])
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+ fi
+ ])
+ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
+])# _LT_SYS_MODULE_PATH_AIX
+
+
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
+
+
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script which will find a shell with a builtin
+# printf (which we can use as an echo command).
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+case "$ECHO" in
+ printf*) AC_MSG_RESULT([printf]) ;;
+ print*) AC_MSG_RESULT([print -r]) ;;
+ *) AC_MSG_RESULT([cat]) ;;
+esac
+
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test "X`printf %s $ECHO`" = "X$ECHO" \
+ || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
+
+
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[ --with-sysroot[=DIR] Search for dependent libraries within DIR
+ (or the compiler's sysroot if not specified).],
+[], [with_sysroot=no])
+
+dnl lt_sysroot will always be passed unquoted. We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case ${with_sysroot} in #(
+ yes)
+ if test "$GCC" = yes; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ AC_MSG_RESULT([${with_sysroot}])
+ AC_MSG_ERROR([The sysroot must be an absolute path.])
+ ;;
+esac
+
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and in which our libraries should be installed.])])
+
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+ [AS_HELP_STRING([--disable-libtool-lock],
+ [avoid locking (might break parallel builds)])])
+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out which ABI we are using.
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*|powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_LANG_PUSH(C)
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+ AC_LANG_POP])
+ if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS="$SAVE_CFLAGS"
+ fi
+ ;;
+*-*solaris*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*)
+ case $host in
+ i?86-*-solaris*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ sparc*-*-solaris*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+ LD="${LD-ld}_sol2"
+ fi
+ ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks="$enable_libtool_lock"
+])# _LT_ENABLE_LOCK
+
+
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+ [lt_cv_ar_at_file=no
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+ [echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+ AC_TRY_EVAL([lt_ar_try])
+ if test "$ac_status" -eq 0; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ AC_TRY_EVAL([lt_ar_try])
+ if test "$ac_status" -ne 0; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+ ])
+ ])
+
+if test "x$lt_cv_ar_at_file" = xno; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+ [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[_LT_PROG_AR
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+ [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+ [Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+ [Whether to use a lock for old archive extraction])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$3"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ fi
+ $RM conftest*
+])
+
+if test x"[$]$2" = xyes; then
+ m4_if([$5], , :, [$5])
+else
+ m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS $3"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ else
+ $2=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS="$save_LDFLAGS"
+])
+
+if test x"[$]$2" = xyes; then
+ m4_if([$4], , :, [$4])
+else
+ m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+ i=0
+ teststring="ABCD"
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ os2*)
+ # The test takes a long time on OS/2.
+ lt_cv_sys_max_cmd_len=8192
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8 ; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test $i != 17 # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+])
+if test -n $lt_cv_sys_max_cmd_len ; then
+ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+ AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+ [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
+
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "$cross_compiling" = yes; then :
+ [$4]
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+[#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisbility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}]
+_LT_EOF
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) $1 ;;
+ x$lt_dlneed_uscore) $2 ;;
+ x$lt_dlunknown|x*) $3 ;;
+ esac
+ else :
+ # compilation failed
+ $3
+ fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
+
+
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test "x$enable_dlopen" != xyes; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen="dlopen"
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
+ lt_cv_dlopen="dyld"
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ])
+ ;;
+
+ *)
+ AC_CHECK_FUNC([shl_load],
+ [lt_cv_dlopen="shl_load"],
+ [AC_CHECK_LIB([dld], [shl_load],
+ [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+ [AC_CHECK_FUNC([dlopen],
+ [lt_cv_dlopen="dlopen"],
+ [AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+ [AC_CHECK_LIB([svld], [dlopen],
+ [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+ [AC_CHECK_LIB([dld], [dld_link],
+ [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+ ])
+ ])
+ ])
+ ])
+ ])
+ ;;
+ esac
+
+ if test "x$lt_cv_dlopen" != xno; then
+ enable_dlopen=yes
+ else
+ enable_dlopen=no
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS="$CPPFLAGS"
+ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS="$LDFLAGS"
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS="$LIBS"
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ AC_CACHE_CHECK([whether a program can dlopen itself],
+ lt_cv_dlopen_self, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+ ])
+
+ if test "x$lt_cv_dlopen_self" = xyes; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+ lt_cv_dlopen_self_static, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
+ ])
+ fi
+
+ CPPFLAGS="$save_CPPFLAGS"
+ LDFLAGS="$save_LDFLAGS"
+ LIBS="$save_LIBS"
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+ [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+ [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+ [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+ fi
+ fi
+ chmod u+w . 2>&AS_MESSAGE_LOG_FD
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+ [Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
+
+
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+
+hard_links="nottested"
+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+ # do not overwrite the value of need_locks provided by the user
+ AC_MSG_CHECKING([if we can lock with hard links])
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ AC_MSG_RESULT([$hard_links])
+ if test "$hard_links" = no; then
+ AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
+
+
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+ [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
+ [Define to the sub-directory in which libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+ test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+ test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+
+ # We can hardcode non-existent directories.
+ if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
+ test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+ # Linking always hardcodes the temporary library directory.
+ _LT_TAGVAR(hardcode_action, $1)=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ _LT_TAGVAR(hardcode_action, $1)=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ _LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+
+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
+ test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test "$shlibpath_overrides_runpath" = yes ||
+ test "$enable_shared" = no; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+ [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
+
+
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP" ; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ fi
+ ;;
+ *)
+ AC_MSG_RESULT([no])
+ ;;
+ esac
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
+
+
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+ [], [
+if test "$GCC" = yes; then
+ case $host_os in
+ darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
+ *) lt_awk_arg="/^libraries:/" ;;
+ esac
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
+ *) lt_sed_strip_eq="s,=/,/,g" ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary.
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path/$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
+ else
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS=" "; FS="/|\n";} {
+ lt_foo="";
+ lt_count=0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo="/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=".so"
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+case $host_os in
+aix3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+
+aix[[4-9]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test "$host_cpu" = ia64; then
+ # AIX 5 supports IA64
+ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line `#! .'. This would cause the generated library to
+ # depend on `.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[[01]] | aix4.[[01]].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ if test "$aix_use_runtimelinking" = yes; then
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ else
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='${libname}${release}.a $libname.a'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ fi
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='${libname}${shared_ext}'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[[45]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=".dll"
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='${libname}.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec="$LIB"
+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \${file}`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
+ # Assume MSVC wrapper
+ library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
+ soname_spec='${libname}${release}${major}$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[[23]].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+gnu*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+haiku*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ if test "X$HPUX_IA64_MODE" = X32; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ fi
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[[3-9]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
+ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+ [lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+ [lt_cv_shlibpath_overrides_runpath=yes])])
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+ ])
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Add ABI-specific directories to the system library path.
+ sys_lib_dlsearch_path_spec="/lib64 /usr/lib64 /lib /usr/lib"
+
+ # Append ld.so.conf contents to the search path
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="$sys_lib_dlsearch_path_spec $lt_ld_extra"
+
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec="/usr/lib"
+ need_lib_prefix=no
+ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
+ case $host_os in
+ openbsd3.3 | openbsd3.3.*) need_version=yes ;;
+ *) need_version=no ;;
+ esac
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ case $host_os in
+ openbsd2.[[89]] | openbsd2.[[89]].*)
+ shlibpath_overrides_runpath=no
+ ;;
+ *)
+ shlibpath_overrides_runpath=yes
+ ;;
+ esac
+ else
+ shlibpath_overrides_runpath=yes
+ fi
+ ;;
+
+os2*)
+ libname_spec='$name'
+ shrext_cmds=".dll"
+ need_lib_prefix=no
+ library_names_spec='$libname${shared_ext} $libname.a'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=LIBPATH
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test "$with_gnu_ld" = yes; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec ;then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
+ soname_spec='$libname${shared_ext}.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=freebsd-elf
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test "$with_gnu_ld" = yes; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='${libname}${release}${shared_ext}$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test "$dynamic_linker" = no && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test "$GCC" = yes; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
+ sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+fi
+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
+ sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+fi
+
+_LT_DECL([], [variables_saved_for_relink], [1],
+ [Variables whose values should be saved in libtool wrapper scripts and
+ restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+ [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+ [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+ [[List of archive names. First name is the real one, the rest are links.
+ The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+ [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+ [Permission mode override for installation of shared libraries])
+_LT_DECL([], [postinstall_cmds], [2],
+ [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+ [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+ [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+ [[As "finish_cmds", except a single script fragment to be evaled but
+ not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+ [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+ [Compile-time system search path for libraries])
+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
+ [Run-time system search path for libraries])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program which can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] | ?:[\\/]*])
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD="$MAGIC_CMD"
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word. This closes a longstanding sh security hole.
+ ac_dummy="m4_if([$2], , $PATH, [$2])"
+ for ac_dir in $ac_dummy; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$1; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** [email protected]
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$lt_save_ifs"
+ MAGIC_CMD="$lt_save_MAGIC_CMD"
+ ;;
+esac])
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ AC_MSG_RESULT($MAGIC_CMD)
+else
+ AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+ [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program which can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+ else
+ MAGIC_CMD=:
+ fi
+fi
+])# _LT_PATH_MAGIC
+
+
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+AC_ARG_WITH([gnu-ld],
+ [AS_HELP_STRING([--with-gnu-ld],
+ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+ [test "$withval" = no || with_gnu_ld=yes],
+ [with_gnu_ld=no])dnl
+
+ac_prog=ld
+if test "$GCC" = yes; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by $CC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]]* | ?:[[\\/]]*)
+ re_direlt='/[[^/]][[^/]]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD="$ac_prog"
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test "$with_gnu_ld" = yes; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD="$ac_dir/$ac_prog"
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test "$with_gnu_ld" != no && break
+ ;;
+ *)
+ test "$with_gnu_ld" != yes && break
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+else
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
+fi])
+LD="$lt_cv_path_LD"
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
+
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
+
+
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+# -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+ lt_cv_ld_reload_flag,
+ [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test "$GCC" != yes; then
+ reload_cmds=false
+ fi
+ ;;
+ darwin*)
+ if test "$GCC" = yes; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+
+
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given extended regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[[45]]*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
+ if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[[3-9]]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+_LT_DECL([], [deplibs_check_method], [1],
+ [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+ [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+ [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+
+
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM="$NM"
+else
+ lt_nm_to_check="${ac_tool_prefix}nm"
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS="$lt_save_ifs"
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm="$ac_dir/$lt_tmp_nm"
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
+ */dev/null* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS="$lt_save_ifs"
+ done
+ : ${lt_cv_path_NM=no}
+fi])
+if test "$lt_cv_path_NM" != "no"; then
+ NM="$lt_cv_path_NM"
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+ case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
+ AC_SUBST([DUMPBIN])
+ if test "$DUMPBIN" != ":"; then
+ NM="$DUMPBIN"
+ fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+ [lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+ cat conftest.out >&AS_MESSAGE_LOG_FD
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
+
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh
+ # decide which to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+ [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+ [lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*])
+if test "x$lt_cv_path_mainfest_tool" != xyes; then
+ MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
+
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+ # These system don't have libm, or don't need it
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, cos, LIBM="-lm")
+ ;;
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
+
+
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test "$GCC" = yes; then
+ case $cc_basename in
+ nvcc*)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+ esac
+
+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+ lt_cv_prog_compiler_rtti_exceptions,
+ [-fno-rtti -fno-exceptions], [],
+ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+ [Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+
+
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[[BCDT]]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[[ABCDGISTW]]'
+ ;;
+hpux*)
+ if test "$host_cpu" = ia64; then
+ symcode='[[ABCDEGRST]]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[[BCDEGRST]]'
+ ;;
+osf*)
+ symcode='[[BCDEGQRST]]'
+ ;;
+solaris*)
+ symcode='[[BDRT]]'
+ ;;
+sco3.2v5*)
+ symcode='[[DT]]'
+ ;;
+sysv4.2uw2*)
+ symcode='[[DT]]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[[ABDT]]'
+ ;;
+sysv4)
+ symcode='[[DFNSTU]]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function
+ # and D for any global variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK ['"\
+" {last_section=section; section=\$ 3};"\
+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
+" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
+" s[1]~/^[@?]/{print s[1], s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx]"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
+/* DATA imports from DLLs on WIN32 con't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT@&t@_DLSYM_CONST
+#elif defined(__osf__)
+/* This system does not cope well with relocations in const data. */
+# define LT@&t@_DLSYM_CONST
+#else
+# define LT@&t@_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+LT@&t@_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS="conftstm.$ac_objext"
+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ pipe_works=yes
+ fi
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test "$pipe_works" = yes; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ AC_MSG_RESULT(failed)
+else
+ AC_MSG_RESULT(ok)
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+ [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+ [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_c_name_address],
+ [lt_cv_sys_global_symbol_to_c_name_address], [1],
+ [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([], [nm_file_list_spec], [1],
+ [Specify filename containing input files for $NM])
+]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+m4_if([$1], [CXX], [
+ # C++ specific cases for pic, static, wl, etc.
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+ *djgpp*)
+ # DJGPP does not support shared libraries at all
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ else
+ case $host_os in
+ aix[[4-9]]*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ cxch68*)
+ # Green Hills C++ Compiler
+ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ freebsd* | dragonfly*)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ fi
+ ;;
+ aCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ interix*)
+ # This is c89, which is MS Visual C++ (no shared libs)
+ # Anyone wants to do a port?
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ # CC pic flag -KPIC is the default.
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # KAI C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ ecpc* )
+ # old Intel C++ for x86_64 which still supported -KPIC.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ cxx*)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ lynxos*)
+ ;;
+ m88k*)
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ netbsd*)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ cxx*)
+ # Digital/Compaq C++
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ psos*)
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ lcc*)
+ # Lucid
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ vxworks*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+],
+[
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the `-m68020' flag to GCC prevents building anything better,
+ # like `-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+ if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+ fi
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ if test "$host_cpu" = ia64; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC (with -KPIC) is the default.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ # old Intel for x86_64 which still supported -KPIC.
+ ecc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+ ;;
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ ccc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All Alpha code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ ;;
+ *Sun\ F* | *Sun*Fortran*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ *Sun\ C*)
+ # Sun C 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ ;;
+ *Intel*\ [[CF]]*Compiler*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ *Portland\ Group*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All OSF/1 code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ rdos*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec ;then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ unicos*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+])
+case $host_os in
+ # For platforms which do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+ ;;
+esac
+
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+ "" | " "*) ;;
+ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+ esac],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+ [Additional compiler flags for building library objects])
+
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+ [How to pass a linker flag through the compiler])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+ $lt_tmp_static_flag,
+ [],
+ [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+ [Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
+
+
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ case $host_os in
+ aix[[4-9]]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global defined
+ # symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+ ;;
+ cygwin* | mingw* | cegcc*)
+ case $cc_basename in
+ cl*)
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+ ;;
+ esac
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ esac
+], [
+ runpath_var=
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)=
+ _LT_TAGVAR(archive_expsym_cmds, $1)=
+ _LT_TAGVAR(compiler_needs_object, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(hardcode_automatic, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ _LT_TAGVAR(hardcode_minus_L, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_TAGVAR(inherit_rpath, $1)=no
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+ _LT_TAGVAR(thread_safe_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ _LT_TAGVAR(include_expsyms, $1)=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ` (' and `)$', so one must not match beginning or
+ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
+ # as well as any symbol that contains `d'.
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test "$GCC" != yes; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test "$with_gnu_ld" = yes; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+ *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test "$lt_use_gnu_ld_interface" = yes; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='${wl}'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[[3-9]]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <[email protected]> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test "$host_os" = linux-dietlibc; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test "$tmp_diet" = no
+ then
+ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ tmp_sharedflag='--shared' ;;
+ xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+
+ if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+ runpath_var=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to AIX nm, but means don't demangle with GNU nm
+ # Also, AIX nm treats weak defined symbols like other global
+ # defined symbols, whereas GNU nm marks them as "W".
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GCC" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[[45]]*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2.*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ hpux9*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+
+ hpux10*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ m4_if($1, [], [
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ _LT_LINKER_OPTION([if $CC understands -b],
+ _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+ [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+ ;;
+ esac
+ fi
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ # This should be the same for all languages, so no per-tag cache variable.
+ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+ [lt_cv_irix_exported_symbol],
+ [save_LDFLAGS="$LDFLAGS"
+ LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ AC_LINK_IFELSE(
+ [AC_LANG_SOURCE(
+ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+ [C++], [[int foo (void) { return 0; }]],
+ [Fortran 77], [[
+ subroutine foo
+ end]],
+ [Fortran], [[
+ subroutine foo
+ end]])])],
+ [lt_cv_irix_exported_symbol=yes],
+ [lt_cv_irix_exported_symbol=no])
+ LDFLAGS="$save_LDFLAGS"])
+ if test "$lt_cv_irix_exported_symbol" = yes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ fi
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ else
+ case $host_os in
+ openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ ;;
+ esac
+ fi
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ ;;
+
+ osf3*)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+ if test "$GCC" = yes; then
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='${wl}'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ sunos4*)
+ if test "x$host_vendor" = xsequent; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ ;;
+ motorola)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4.3*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test "$GCC" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ if test x$host_vendor = xsni; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+ [The commands to extract the exported symbol list from a shared archive])
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+ # Assume -lc should be added
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+ if test "$enable_shared" = yes && test "$GCC" = yes; then
+ case $_LT_TAGVAR(archive_cmds, $1) in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+ [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+ [$RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+ then
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ else
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ fi
+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ ])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+ [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+ [enable_shared_with_static_runtimes], [0],
+ [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+ [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+ [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+ [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+ [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+ [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+ [Commands used to build a loadable module if different from building
+ a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+ [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+ [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+ [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+ [Flag to hardcode $libdir into a binary during linking.
+ This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+ [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+ [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ DIR into the resulting binary and the resulting library dependency is
+ "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+ library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+ [Set to "yes" if building a shared library automatically hardcodes DIR
+ into the library and all subsequent libraries and executables linked
+ against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+ [Set to yes if linker adds runtime paths of dependent libraries
+ to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+ [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [always_export_symbols], [0],
+ [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+ [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+ [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+ [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+ [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+ [Commands necessary for finishing linking programs])
+_LT_TAGDECL([], [file_list_spec], [1],
+ [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC="$CC"
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+ LT_SYS_DLOPEN_SELF
+ _LT_CMD_STRIPLIB
+
+ # Report which library types will actually be built
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC="$lt_save_CC"
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
+ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
+ (test "X$CXX" != "Xg++"))) ; then
+ AC_PROG_CXXCPP
+else
+ _lt_caught_CXX_error=yes
+fi
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_caught_CXX_error" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_CFLAGS=$CFLAGS
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ CFLAGS=$CXXFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+ else
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+ fi
+
+ if test "$GXX" = yes; then
+ # Set up default GNU C++ configuration
+
+ LT_PATH_LD
+
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='${wl}'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
+
+ # PORTME: fill in a description of your system's C++ link characteristics
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" = ia64; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=""
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # need to do runtime linking.
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+
+ if test "$GXX" = yes; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`${CC} -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ esac
+ shared_flag='-shared'
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag="$shared_flag "'${wl}-G'
+ fi
+ else
+ # not using gcc
+ if test "$host_cpu" = ia64; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test "$aix_use_runtimelinking" = yes; then
+ shared_flag='${wl}-G'
+ else
+ shared_flag='${wl}-bM:SRE'
+ fi
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test "$aix_use_runtimelinking" = yes; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ else
+ if test "$host_cpu" = ia64; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
+ if test "$with_gnu_ld" = yes; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ # This is similar to how AIX traditionally builds its shared
+ # libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ fi
+ fi
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <[email protected]> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $GXX,$cc_basename in
+ ,cl* | no,cl*)
+ # Native MSVC
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=".dll"
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
+ else
+ $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile="$lt_outputfile.exe"
+ lt_tool_outputfile="$lt_tool_outputfile.exe"
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # g++
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file (1st line
+ # is EXPORTS), use it as is; otherwise, prepend...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ freebsd2.*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ freebsd-elf*)
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ gnu*)
+ ;;
+
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ hpux9*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ hpux10*|hpux11*)
+ if test $with_gnu_ld = no; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test $with_gnu_ld = no; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test "$GXX" = yes; then
+ if test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ fi
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+ esac
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ *) # Version 6 and above use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ ;;
+ xl* | mpixl* | bgxl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ m88k*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+
+ *nto* | *qnx*)
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ openbsd2*)
+ # C++ shared libraries are fairly broken
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ openbsd*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=func_echo_all
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
+ $RM $lib.exp'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ case $host in
+ osf3*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ psos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands `-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test "$GXX" = yes && test "$with_gnu_ld" = no; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # platform.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ fi
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We can NOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+ '"$_LT_TAGVAR(old_archive_cmds, $1)"
+ _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+ '"$_LT_TAGVAR(reload_cmds, $1)"
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+ test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+
+ _LT_TAGVAR(GCC, $1)="$GXX"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test "$_lt_caught_CXX_error" != yes
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+ case ${2} in
+ .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
+ *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library. It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer*4 a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+ private int a;
+ public void bar (void) {
+ a = 0;
+ }
+};
+_LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
+])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case ${prev}${p} in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test $p = "-L" ||
+ test $p = "-R"; then
+ prev=$p
+ continue
+ fi
+
+ # Expand the sysroot to ease extracting the directories later.
+ if test -z "$prev"; then
+ case $p in
+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+ esac
+ fi
+ case $p in
+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+ esac
+ if test "$pre_test_object_deps_done" = no; then
+ case ${prev} in
+ -L | -R)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+ _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+ else
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ fi
+ fi
+ prev=
+ ;;
+
+ *.lto.$objext) ;; # Ignore GCC LTO objects
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test "$pre_test_object_deps_done" = no; then
+ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+ _LT_TAGVAR(predep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+ fi
+ else
+ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+ _LT_TAGVAR(postdep_objects, $1)="$p"
+ else
+ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ _LT_TAGVAR(predep_objects,$1)=
+ _LT_TAGVAR(postdep_objects,$1)=
+ _LT_TAGVAR(postdeps,$1)=
+ ;;
+
+linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # The more standards-conforming stlport4 library is
+ # incompatible with the Cstd library. Avoid specifying
+ # it if it's in CXXFLAGS. Ignore libCrun as
+ # -library=stlport4 depends on it.
+ case " $CXX $CXXFLAGS " in
+ *" -library=stlport4 "*)
+ solaris_use_stlport4=yes
+ ;;
+ esac
+
+ # Adding this requires a known-good setup of shared libraries for
+ # Sun compiler versions before 5.6, else PIC objects from an old
+ # archive will be linked into the output, leading to subtle bugs.
+ if test "$solaris_use_stlport4" != yes; then
+ _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+ [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+ [Dependencies to place before and after the objects being linked to
+ create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+ [The library search path used internally by the compiler when linking
+ a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test "X$F77" = "Xno"; then
+ _lt_disable_F77=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_F77" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
+ CC=${F77-"f77"}
+ CFLAGS=$FFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+ GCC=$G77
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$G77"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC="$lt_save_CC"
+ CFLAGS="$lt_save_CFLAGS"
+fi # test "$_lt_disable_F77" != yes
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test "X$FC" = "Xno"; then
+ _lt_disable_FC=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test "$_lt_disable_FC" != yes; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC="$CC"
+ lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
+ CC=${FC-"f95"}
+ CFLAGS=$FCFLAGS
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
+
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test "$can_build_shared" = "no" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test "$enable_shared" = yes && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
+ test "$enable_shared" = yes && enable_static=no
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test "$enable_shared" = yes || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
+ _LT_TAGVAR(LD, $1)="$LD"
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test "$_lt_disable_FC" != yes
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)="$LD"
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to `libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code="$lt_simple_compile_test_code"
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC="$CC"
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+CFLAGS=
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+ :
+ _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+ [AC_CHECK_TOOL(GCJ, gcj,)
+ test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
+])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible. Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+ [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_SED. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+############################################################
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for lt_ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+ fi
+ done
+ done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+ test ! -f $lt_ac_sed && continue
+ cat /dev/null > conftest.in
+ lt_ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+ # Check for GNU sed and select it if it is found.
+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+ lt_cv_path_SED=$lt_ac_sed
+ break
+ fi
+ while true; do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo >>conftest.nl
+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+ cmp -s conftest.out conftest.nl || break
+ # 10000 chars as input seems more than enough
+ test $lt_ac_count -gt 10 && break
+ lt_ac_count=`expr $lt_ac_count + 1`
+ if test $lt_ac_count -gt $lt_ac_max; then
+ lt_ac_max=$lt_ac_count
+ lt_cv_path_SED=$lt_ac_sed
+ fi
+ done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
+# Try some XSI features
+xsi_shell=no
+( _lt_dummy="a/b/c"
+ test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
+ = c,a/b,b/c, \
+ && eval 'test $(( 1 + 1 )) -eq 2 \
+ && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
+ && xsi_shell=yes
+AC_MSG_RESULT([$xsi_shell])
+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
+
+AC_MSG_CHECKING([whether the shell understands "+="])
+lt_shell_append=no
+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
+ >/dev/null 2>&1 \
+ && lt_shell_append=yes
+AC_MSG_RESULT([$lt_shell_append])
+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
+# ------------------------------------------------------
+# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
+# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
+m4_defun([_LT_PROG_FUNCTION_REPLACE],
+[dnl {
+sed -e '/^$1 ()$/,/^} # $1 /c\
+$1 ()\
+{\
+m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
+} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+test 0 -eq $? || _lt_function_replace_fail=:
+])
+
+
+# _LT_PROG_REPLACE_SHELLFNS
+# -------------------------
+# Replace existing portable implementations of several shell functions with
+# equivalent extended shell implementations where those features are available..
+m4_defun([_LT_PROG_REPLACE_SHELLFNS],
+[if test x"$xsi_shell" = xyes; then
+ _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac])
+
+ _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
+ func_basename_result="${1##*/}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
+ case ${1} in
+ */*) func_dirname_result="${1%/*}${2}" ;;
+ * ) func_dirname_result="${3}" ;;
+ esac
+ func_basename_result="${1##*/}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary parameter first.
+ func_stripname_result=${3}
+ func_stripname_result=${func_stripname_result#"${1}"}
+ func_stripname_result=${func_stripname_result%"${2}"}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
+ func_split_long_opt_name=${1%%=*}
+ func_split_long_opt_arg=${1#*=}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
+ func_split_short_opt_arg=${1#??}
+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
+
+ _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
+ case ${1} in
+ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
+ *) func_lo2o_result=${1} ;;
+ esac])
+
+ _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
+
+ _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
+
+ _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
+fi
+
+if test x"$lt_shell_append" = xyes; then
+ _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
+
+ _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
+ func_quote_for_eval "${2}"
+dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
+ eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
+
+ # Save a `func_append' function call where possible by direct use of '+='
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+else
+ # Save a `func_append' function call even when '+=' is not available
+ sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
+ && mv -f "$cfgfile.tmp" "$cfgfile" \
+ || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
+ test 0 -eq $? || _lt_function_replace_fail=:
+fi
+
+if test x"$_lt_function_replace_fail" = x":"; then
+ AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
+fi
+])
+
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine which file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+ [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+ [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
diff --git a/m4/ltoptions.m4 b/m4/ltoptions.m4
new file mode 100644
index 0000000..5d9acd8
--- /dev/null
+++ b/m4/ltoptions.m4
@@ -0,0 +1,384 @@
+# Helper functions for option handling. -*- Autoconf -*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 7 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it. Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+ _LT_MANGLE_DEFUN([$1], [$2]),
+ [m4_warning([Unknown $1 option `$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+ [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME. If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+ dnl
+ dnl Simply set some default values (i.e off) if boolean options were not
+ dnl specified:
+ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+ ])
+ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+ ])
+ dnl
+ dnl If no reference was made to various pairs of opposing options, then
+ dnl we run the default mode handler for the pair. For example, if neither
+ dnl `shared' nor `disable-shared' was passed, we enable building of shared
+ dnl archives by default:
+ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+ [_LT_ENABLE_FAST_INSTALL])
+ ])
+])# _LT_SET_OPTIONS
+
+
+## --------------------------------- ##
+## Macros to handle LT_INIT options. ##
+## --------------------------------- ##
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS], [1], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the `shared' and
+# `disable-shared' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+ _LT_DECL([build_libtool_libs], [enable_shared], [0],
+ [Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the `static' and
+# `disable-static' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+ _LT_DECL([build_old_libs], [enable_static], [0],
+ [Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the `fast-install'
+# and `disable-fast-install' LT_INIT options.
+# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for pkg in $enableval; do
+ IFS="$lt_save_ifs"
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+ [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the `disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# LT_INIT options.
+# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+ [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+ [lt_p=${PACKAGE-default}
+ case $withval in
+ yes|no) pic_mode=$withval ;;
+ *)
+ pic_mode=default
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ for lt_pkg in $withval; do
+ IFS="$lt_save_ifs"
+ if test "X$lt_pkg" = "X$lt_p"; then
+ pic_mode=yes
+ fi
+ done
+ IFS="$lt_save_ifs"
+ ;;
+ esac],
+ [pic_mode=default])
+
+test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the `pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+## ----------------- ##
+## LTDL_INIT Options ##
+## ----------------- ##
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+ [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+ [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+ [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+ [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+ [m4_define([_LTDL_TYPE], [convenience])])
diff --git a/m4/ltsugar.m4 b/m4/ltsugar.m4
new file mode 100644
index 0000000..9000a05
--- /dev/null
+++ b/m4/ltsugar.m4
@@ -0,0 +1,123 @@
+# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+ [$#], [2], [[$2]],
+ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59 which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+ [$#], 1, [],
+ [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+ [m4_foreach([_Lt_suffix],
+ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+ [lt_append([$1], [$2], [$3])$4],
+ [$5])],
+ [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+ [$5],
+ [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+ [lt_join(m4_quote(m4_default([$4], [[, ]])),
+ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
diff --git a/m4/ltversion.m4 b/m4/ltversion.m4
new file mode 100644
index 0000000..07a8602
--- /dev/null
+++ b/m4/ltversion.m4
@@ -0,0 +1,23 @@
+# ltversion.m4 -- version numbers -*- Autoconf -*-
+#
+# Copyright (C) 2004 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# @configure_input@
+
+# serial 3337 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.4.2])
+m4_define([LT_PACKAGE_REVISION], [1.3337])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.4.2'
+macro_revision='1.3337'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
diff --git a/m4/lt~obsolete.m4 b/m4/lt~obsolete.m4
new file mode 100644
index 0000000..c573da9
--- /dev/null
+++ b/m4/lt~obsolete.m4
@@ -0,0 +1,98 @@
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
+#
+# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 5 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else. This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
diff --git a/package_version b/package_version
new file mode 100644
index 0000000..8eaa996
--- /dev/null
+++ b/package_version
@@ -0,0 +1 @@
+PACKAGE_VERSION="1.1"
diff --git a/silk/A2NLSF.c b/silk/A2NLSF.c
index e84cc46..74b1b95 100644
--- a/silk/A2NLSF.c
+++ b/silk/A2NLSF.c
@@ -44,7 +44,7 @@
/* Helper function for A2NLSF(..) */
/* Transforms polynomials from cos(n*f) to cos(f)^n */
-static inline void silk_A2NLSF_trans_poly(
+static OPUS_INLINE void silk_A2NLSF_trans_poly(
opus_int32 *p, /* I/O Polynomial */
const opus_int dd /* I Polynomial order (= filter order / 2 ) */
)
@@ -60,7 +60,7 @@
}
/* Helper function for A2NLSF(..) */
/* Polynomial evaluation */
-static inline opus_int32 silk_A2NLSF_eval_poly( /* return the polynomial evaluation, in Q16 */
+static OPUS_INLINE opus_int32 silk_A2NLSF_eval_poly( /* return the polynomial evaluation, in Q16 */
opus_int32 *p, /* I Polynomial, Q16 */
const opus_int32 x, /* I Evaluation point, Q12 */
const opus_int dd /* I Order */
@@ -77,7 +77,7 @@
return y32;
}
-static inline void silk_A2NLSF_init(
+static OPUS_INLINE void silk_A2NLSF_init(
const opus_int32 *a_Q16,
opus_int32 *P,
opus_int32 *Q,
diff --git a/silk/API.h b/silk/API.h
index 4fe7629..f0601bc 100644
--- a/silk/API.h
+++ b/silk/API.h
@@ -64,6 +64,7 @@
/*************************/
opus_int silk_InitEncoder( /* O Returns error code */
void *encState, /* I/O State */
+ int arch, /* I Run-time architecture */
silk_EncControlStruct *encStatus /* O Encoder Status */
);
diff --git a/silk/CNG.c b/silk/CNG.c
index d175dd5..8481d95 100644
--- a/silk/CNG.c
+++ b/silk/CNG.c
@@ -33,7 +33,7 @@
#include "stack_alloc.h"
/* Generates excitation for CNG LPC synthesis */
-static inline void silk_CNG_exc(
+static OPUS_INLINE void silk_CNG_exc(
opus_int32 residual_Q10[], /* O CNG residual signal Q10 */
opus_int32 exc_buf_Q14[], /* I Random samples buffer Q10 */
opus_int32 Gain_Q16, /* I Gain to apply */
diff --git a/silk/Inlines.h b/silk/Inlines.h
index 244f66f..ec986cd 100644
--- a/silk/Inlines.h
+++ b/silk/Inlines.h
@@ -26,7 +26,7 @@
***********************************************************************/
/*! \file silk_Inlines.h
- * \brief silk_Inlines.h defines inline signal processing functions.
+ * \brief silk_Inlines.h defines OPUS_INLINE signal processing functions.
*/
#ifndef SILK_FIX_INLINES_H
@@ -38,7 +38,7 @@
#endif
/* count leading zeros of opus_int64 */
-static inline opus_int32 silk_CLZ64( opus_int64 in )
+static OPUS_INLINE opus_int32 silk_CLZ64( opus_int64 in )
{
opus_int32 in_upper;
@@ -53,7 +53,7 @@
}
/* get number of leading zeros and fractional part (the bits right after the leading one */
-static inline void silk_CLZ_FRAC(
+static OPUS_INLINE void silk_CLZ_FRAC(
opus_int32 in, /* I input */
opus_int32 *lz, /* O number of leading zeros */
opus_int32 *frac_Q7 /* O the 7 bits right after the leading one */
@@ -68,7 +68,7 @@
/* Approximation of square root */
/* Accuracy: < +/- 10% for output values > 15 */
/* < +/- 2.5% for output values > 120 */
-static inline opus_int32 silk_SQRT_APPROX( opus_int32 x )
+static OPUS_INLINE opus_int32 silk_SQRT_APPROX( opus_int32 x )
{
opus_int32 y, lz, frac_Q7;
@@ -94,7 +94,7 @@
}
/* Divide two int32 values and return result as int32 in a given Q-domain */
-static inline opus_int32 silk_DIV32_varQ( /* O returns a good approximation of "(a32 << Qres) / b32" */
+static OPUS_INLINE opus_int32 silk_DIV32_varQ( /* O returns a good approximation of "(a32 << Qres) / b32" */
const opus_int32 a32, /* I numerator (Q0) */
const opus_int32 b32, /* I denominator (Q0) */
const opus_int Qres /* I Q-domain of result (>= 0) */
@@ -140,7 +140,7 @@
}
/* Invert int32 value and return result as int32 in a given Q-domain */
-static inline opus_int32 silk_INVERSE32_varQ( /* O returns a good approximation of "(1 << Qres) / b32" */
+static OPUS_INLINE opus_int32 silk_INVERSE32_varQ( /* O returns a good approximation of "(1 << Qres) / b32" */
const opus_int32 b32, /* I denominator (Q0) */
const opus_int Qres /* I Q-domain of result (> 0) */
)
diff --git a/silk/LP_variable_cutoff.c b/silk/LP_variable_cutoff.c
index c1ac23e..f639e1f 100644
--- a/silk/LP_variable_cutoff.c
+++ b/silk/LP_variable_cutoff.c
@@ -38,7 +38,7 @@
#include "main.h"
/* Helper function, interpolates the filter taps */
-static inline void silk_LP_interpolate_filter_taps(
+static OPUS_INLINE void silk_LP_interpolate_filter_taps(
opus_int32 B_Q28[ TRANSITION_NB ],
opus_int32 A_Q28[ TRANSITION_NA ],
const opus_int ind,
diff --git a/silk/MacroCount.h b/silk/MacroCount.h
index dbb9775..834817d 100644
--- a/silk/MacroCount.h
+++ b/silk/MacroCount.h
@@ -34,11 +34,11 @@
extern opus_int64 ops_count;
-static inline opus_int64 silk_SaveCount(){
+static OPUS_INLINE opus_int64 silk_SaveCount(){
return(ops_count);
}
-static inline opus_int64 silk_SaveResetCount(){
+static OPUS_INLINE opus_int64 silk_SaveResetCount(){
opus_int64 ret;
ret = ops_count;
@@ -46,12 +46,12 @@
return(ret);
}
-static inline silk_PrintCount(){
+static OPUS_INLINE silk_PrintCount(){
printf("ops_count = %d \n ", (opus_int32)ops_count);
}
#undef silk_MUL
-static inline opus_int32 silk_MUL(opus_int32 a32, opus_int32 b32){
+static OPUS_INLINE opus_int32 silk_MUL(opus_int32 a32, opus_int32 b32){
opus_int32 ret;
ops_count += 4;
ret = a32 * b32;
@@ -59,14 +59,14 @@
}
#undef silk_MUL_uint
-static inline opus_uint32 silk_MUL_uint(opus_uint32 a32, opus_uint32 b32){
+static OPUS_INLINE opus_uint32 silk_MUL_uint(opus_uint32 a32, opus_uint32 b32){
opus_uint32 ret;
ops_count += 4;
ret = a32 * b32;
return ret;
}
#undef silk_MLA
-static inline opus_int32 silk_MLA(opus_int32 a32, opus_int32 b32, opus_int32 c32){
+static OPUS_INLINE opus_int32 silk_MLA(opus_int32 a32, opus_int32 b32, opus_int32 c32){
opus_int32 ret;
ops_count += 4;
ret = a32 + b32 * c32;
@@ -74,7 +74,7 @@
}
#undef silk_MLA_uint
-static inline opus_int32 silk_MLA_uint(opus_uint32 a32, opus_uint32 b32, opus_uint32 c32){
+static OPUS_INLINE opus_int32 silk_MLA_uint(opus_uint32 a32, opus_uint32 b32, opus_uint32 c32){
opus_uint32 ret;
ops_count += 4;
ret = a32 + b32 * c32;
@@ -82,14 +82,14 @@
}
#undef silk_SMULWB
-static inline opus_int32 silk_SMULWB(opus_int32 a32, opus_int32 b32){
+static OPUS_INLINE opus_int32 silk_SMULWB(opus_int32 a32, opus_int32 b32){
opus_int32 ret;
ops_count += 5;
ret = (a32 >> 16) * (opus_int32)((opus_int16)b32) + (((a32 & 0x0000FFFF) * (opus_int32)((opus_int16)b32)) >> 16);
return ret;
}
#undef silk_SMLAWB
-static inline opus_int32 silk_SMLAWB(opus_int32 a32, opus_int32 b32, opus_int32 c32){
+static OPUS_INLINE opus_int32 silk_SMLAWB(opus_int32 a32, opus_int32 b32, opus_int32 c32){
opus_int32 ret;
ops_count += 5;
ret = ((a32) + ((((b32) >> 16) * (opus_int32)((opus_int16)(c32))) + ((((b32) & 0x0000FFFF) * (opus_int32)((opus_int16)(c32))) >> 16)));
@@ -97,14 +97,14 @@
}
#undef silk_SMULWT
-static inline opus_int32 silk_SMULWT(opus_int32 a32, opus_int32 b32){
+static OPUS_INLINE opus_int32 silk_SMULWT(opus_int32 a32, opus_int32 b32){
opus_int32 ret;
ops_count += 4;
ret = (a32 >> 16) * (b32 >> 16) + (((a32 & 0x0000FFFF) * (b32 >> 16)) >> 16);
return ret;
}
#undef silk_SMLAWT
-static inline opus_int32 silk_SMLAWT(opus_int32 a32, opus_int32 b32, opus_int32 c32){
+static OPUS_INLINE opus_int32 silk_SMLAWT(opus_int32 a32, opus_int32 b32, opus_int32 c32){
opus_int32 ret;
ops_count += 4;
ret = a32 + ((b32 >> 16) * (c32 >> 16)) + (((b32 & 0x0000FFFF) * ((c32 >> 16)) >> 16));
@@ -112,14 +112,14 @@
}
#undef silk_SMULBB
-static inline opus_int32 silk_SMULBB(opus_int32 a32, opus_int32 b32){
+static OPUS_INLINE opus_int32 silk_SMULBB(opus_int32 a32, opus_int32 b32){
opus_int32 ret;
ops_count += 1;
ret = (opus_int32)((opus_int16)a32) * (opus_int32)((opus_int16)b32);
return ret;
}
#undef silk_SMLABB
-static inline opus_int32 silk_SMLABB(opus_int32 a32, opus_int32 b32, opus_int32 c32){
+static OPUS_INLINE opus_int32 silk_SMLABB(opus_int32 a32, opus_int32 b32, opus_int32 c32){
opus_int32 ret;
ops_count += 1;
ret = a32 + (opus_int32)((opus_int16)b32) * (opus_int32)((opus_int16)c32);
@@ -127,7 +127,7 @@
}
#undef silk_SMULBT
-static inline opus_int32 silk_SMULBT(opus_int32 a32, opus_int32 b32 ){
+static OPUS_INLINE opus_int32 silk_SMULBT(opus_int32 a32, opus_int32 b32 ){
opus_int32 ret;
ops_count += 4;
ret = ((opus_int32)((opus_int16)a32)) * (b32 >> 16);
@@ -135,7 +135,7 @@
}
#undef silk_SMLABT
-static inline opus_int32 silk_SMLABT(opus_int32 a32, opus_int32 b32, opus_int32 c32){
+static OPUS_INLINE opus_int32 silk_SMLABT(opus_int32 a32, opus_int32 b32, opus_int32 c32){
opus_int32 ret;
ops_count += 1;
ret = a32 + ((opus_int32)((opus_int16)b32)) * (c32 >> 16);
@@ -143,7 +143,7 @@
}
#undef silk_SMULTT
-static inline opus_int32 silk_SMULTT(opus_int32 a32, opus_int32 b32){
+static OPUS_INLINE opus_int32 silk_SMULTT(opus_int32 a32, opus_int32 b32){
opus_int32 ret;
ops_count += 1;
ret = (a32 >> 16) * (b32 >> 16);
@@ -151,7 +151,7 @@
}
#undef silk_SMLATT
-static inline opus_int32 silk_SMLATT(opus_int32 a32, opus_int32 b32, opus_int32 c32){
+static OPUS_INLINE opus_int32 silk_SMLATT(opus_int32 a32, opus_int32 b32, opus_int32 c32){
opus_int32 ret;
ops_count += 1;
ret = a32 + (b32 >> 16) * (c32 >> 16);
@@ -179,7 +179,7 @@
#define silk_SMLAWT_ovflw silk_SMLAWT
#undef silk_SMULL
-static inline opus_int64 silk_SMULL(opus_int32 a32, opus_int32 b32){
+static OPUS_INLINE opus_int64 silk_SMULL(opus_int32 a32, opus_int32 b32){
opus_int64 ret;
ops_count += 8;
ret = ((opus_int64)(a32) * /*(opus_int64)*/(b32));
@@ -187,14 +187,14 @@
}
#undef silk_SMLAL
-static inline opus_int64 silk_SMLAL(opus_int64 a64, opus_int32 b32, opus_int32 c32){
+static OPUS_INLINE opus_int64 silk_SMLAL(opus_int64 a64, opus_int32 b32, opus_int32 c32){
opus_int64 ret;
ops_count += 8;
ret = a64 + ((opus_int64)(b32) * /*(opus_int64)*/(c32));
return ret;
}
#undef silk_SMLALBB
-static inline opus_int64 silk_SMLALBB(opus_int64 a64, opus_int16 b16, opus_int16 c16){
+static OPUS_INLINE opus_int64 silk_SMLALBB(opus_int64 a64, opus_int16 b16, opus_int16 c16){
opus_int64 ret;
ops_count += 4;
ret = a64 + ((opus_int64)(b16) * /*(opus_int64)*/(c16));
@@ -202,7 +202,7 @@
}
#undef SigProcFIX_CLZ16
-static inline opus_int32 SigProcFIX_CLZ16(opus_int16 in16)
+static OPUS_INLINE opus_int32 SigProcFIX_CLZ16(opus_int16 in16)
{
opus_int32 out32 = 0;
ops_count += 10;
@@ -240,7 +240,7 @@
}
#undef SigProcFIX_CLZ32
-static inline opus_int32 SigProcFIX_CLZ32(opus_int32 in32)
+static OPUS_INLINE opus_int32 SigProcFIX_CLZ32(opus_int32 in32)
{
/* test highest 16 bits and convert to opus_int16 */
ops_count += 2;
@@ -252,19 +252,19 @@
}
#undef silk_DIV32
-static inline opus_int32 silk_DIV32(opus_int32 a32, opus_int32 b32){
+static OPUS_INLINE opus_int32 silk_DIV32(opus_int32 a32, opus_int32 b32){
ops_count += 64;
return a32 / b32;
}
#undef silk_DIV32_16
-static inline opus_int32 silk_DIV32_16(opus_int32 a32, opus_int32 b32){
+static OPUS_INLINE opus_int32 silk_DIV32_16(opus_int32 a32, opus_int32 b32){
ops_count += 32;
return a32 / b32;
}
#undef silk_SAT8
-static inline opus_int8 silk_SAT8(opus_int64 a){
+static OPUS_INLINE opus_int8 silk_SAT8(opus_int64 a){
opus_int8 tmp;
ops_count += 1;
tmp = (opus_int8)((a) > silk_int8_MAX ? silk_int8_MAX : \
@@ -273,7 +273,7 @@
}
#undef silk_SAT16
-static inline opus_int16 silk_SAT16(opus_int64 a){
+static OPUS_INLINE opus_int16 silk_SAT16(opus_int64 a){
opus_int16 tmp;
ops_count += 1;
tmp = (opus_int16)((a) > silk_int16_MAX ? silk_int16_MAX : \
@@ -281,7 +281,7 @@
return(tmp);
}
#undef silk_SAT32
-static inline opus_int32 silk_SAT32(opus_int64 a){
+static OPUS_INLINE opus_int32 silk_SAT32(opus_int64 a){
opus_int32 tmp;
ops_count += 1;
tmp = (opus_int32)((a) > silk_int32_MAX ? silk_int32_MAX : \
@@ -289,7 +289,7 @@
return(tmp);
}
#undef silk_POS_SAT32
-static inline opus_int32 silk_POS_SAT32(opus_int64 a){
+static OPUS_INLINE opus_int32 silk_POS_SAT32(opus_int64 a){
opus_int32 tmp;
ops_count += 1;
tmp = (opus_int32)((a) > silk_int32_MAX ? silk_int32_MAX : (a));
@@ -297,14 +297,14 @@
}
#undef silk_ADD_POS_SAT8
-static inline opus_int8 silk_ADD_POS_SAT8(opus_int64 a, opus_int64 b){
+static OPUS_INLINE opus_int8 silk_ADD_POS_SAT8(opus_int64 a, opus_int64 b){
opus_int8 tmp;
ops_count += 1;
tmp = (opus_int8)((((a)+(b)) & 0x80) ? silk_int8_MAX : ((a)+(b)));
return(tmp);
}
#undef silk_ADD_POS_SAT16
-static inline opus_int16 silk_ADD_POS_SAT16(opus_int64 a, opus_int64 b){
+static OPUS_INLINE opus_int16 silk_ADD_POS_SAT16(opus_int64 a, opus_int64 b){
opus_int16 tmp;
ops_count += 1;
tmp = (opus_int16)((((a)+(b)) & 0x8000) ? silk_int16_MAX : ((a)+(b)));
@@ -312,7 +312,7 @@
}
#undef silk_ADD_POS_SAT32
-static inline opus_int32 silk_ADD_POS_SAT32(opus_int64 a, opus_int64 b){
+static OPUS_INLINE opus_int32 silk_ADD_POS_SAT32(opus_int64 a, opus_int64 b){
opus_int32 tmp;
ops_count += 1;
tmp = (opus_int32)((((a)+(b)) & 0x80000000) ? silk_int32_MAX : ((a)+(b)));
@@ -320,7 +320,7 @@
}
#undef silk_ADD_POS_SAT64
-static inline opus_int64 silk_ADD_POS_SAT64(opus_int64 a, opus_int64 b){
+static OPUS_INLINE opus_int64 silk_ADD_POS_SAT64(opus_int64 a, opus_int64 b){
opus_int64 tmp;
ops_count += 1;
tmp = ((((a)+(b)) & 0x8000000000000000LL) ? silk_int64_MAX : ((a)+(b)));
@@ -328,40 +328,40 @@
}
#undef silk_LSHIFT8
-static inline opus_int8 silk_LSHIFT8(opus_int8 a, opus_int32 shift){
+static OPUS_INLINE opus_int8 silk_LSHIFT8(opus_int8 a, opus_int32 shift){
opus_int8 ret;
ops_count += 1;
ret = a << shift;
return ret;
}
#undef silk_LSHIFT16
-static inline opus_int16 silk_LSHIFT16(opus_int16 a, opus_int32 shift){
+static OPUS_INLINE opus_int16 silk_LSHIFT16(opus_int16 a, opus_int32 shift){
opus_int16 ret;
ops_count += 1;
ret = a << shift;
return ret;
}
#undef silk_LSHIFT32
-static inline opus_int32 silk_LSHIFT32(opus_int32 a, opus_int32 shift){
+static OPUS_INLINE opus_int32 silk_LSHIFT32(opus_int32 a, opus_int32 shift){
opus_int32 ret;
ops_count += 1;
ret = a << shift;
return ret;
}
#undef silk_LSHIFT64
-static inline opus_int64 silk_LSHIFT64(opus_int64 a, opus_int shift){
+static OPUS_INLINE opus_int64 silk_LSHIFT64(opus_int64 a, opus_int shift){
ops_count += 1;
return a << shift;
}
#undef silk_LSHIFT_ovflw
-static inline opus_int32 silk_LSHIFT_ovflw(opus_int32 a, opus_int32 shift){
+static OPUS_INLINE opus_int32 silk_LSHIFT_ovflw(opus_int32 a, opus_int32 shift){
ops_count += 1;
return a << shift;
}
#undef silk_LSHIFT_uint
-static inline opus_uint32 silk_LSHIFT_uint(opus_uint32 a, opus_int32 shift){
+static OPUS_INLINE opus_uint32 silk_LSHIFT_uint(opus_uint32 a, opus_int32 shift){
opus_uint32 ret;
ops_count += 1;
ret = a << shift;
@@ -369,83 +369,83 @@
}
#undef silk_RSHIFT8
-static inline opus_int8 silk_RSHIFT8(opus_int8 a, opus_int32 shift){
+static OPUS_INLINE opus_int8 silk_RSHIFT8(opus_int8 a, opus_int32 shift){
ops_count += 1;
return a >> shift;
}
#undef silk_RSHIFT16
-static inline opus_int16 silk_RSHIFT16(opus_int16 a, opus_int32 shift){
+static OPUS_INLINE opus_int16 silk_RSHIFT16(opus_int16 a, opus_int32 shift){
ops_count += 1;
return a >> shift;
}
#undef silk_RSHIFT32
-static inline opus_int32 silk_RSHIFT32(opus_int32 a, opus_int32 shift){
+static OPUS_INLINE opus_int32 silk_RSHIFT32(opus_int32 a, opus_int32 shift){
ops_count += 1;
return a >> shift;
}
#undef silk_RSHIFT64
-static inline opus_int64 silk_RSHIFT64(opus_int64 a, opus_int64 shift){
+static OPUS_INLINE opus_int64 silk_RSHIFT64(opus_int64 a, opus_int64 shift){
ops_count += 1;
return a >> shift;
}
#undef silk_RSHIFT_uint
-static inline opus_uint32 silk_RSHIFT_uint(opus_uint32 a, opus_int32 shift){
+static OPUS_INLINE opus_uint32 silk_RSHIFT_uint(opus_uint32 a, opus_int32 shift){
ops_count += 1;
return a >> shift;
}
#undef silk_ADD_LSHIFT
-static inline opus_int32 silk_ADD_LSHIFT(opus_int32 a, opus_int32 b, opus_int32 shift){
+static OPUS_INLINE opus_int32 silk_ADD_LSHIFT(opus_int32 a, opus_int32 b, opus_int32 shift){
opus_int32 ret;
ops_count += 1;
ret = a + (b << shift);
return ret; /* shift >= 0*/
}
#undef silk_ADD_LSHIFT32
-static inline opus_int32 silk_ADD_LSHIFT32(opus_int32 a, opus_int32 b, opus_int32 shift){
+static OPUS_INLINE opus_int32 silk_ADD_LSHIFT32(opus_int32 a, opus_int32 b, opus_int32 shift){
opus_int32 ret;
ops_count += 1;
ret = a + (b << shift);
return ret; /* shift >= 0*/
}
#undef silk_ADD_LSHIFT_uint
-static inline opus_uint32 silk_ADD_LSHIFT_uint(opus_uint32 a, opus_uint32 b, opus_int32 shift){
+static OPUS_INLINE opus_uint32 silk_ADD_LSHIFT_uint(opus_uint32 a, opus_uint32 b, opus_int32 shift){
opus_uint32 ret;
ops_count += 1;
ret = a + (b << shift);
return ret; /* shift >= 0*/
}
#undef silk_ADD_RSHIFT
-static inline opus_int32 silk_ADD_RSHIFT(opus_int32 a, opus_int32 b, opus_int32 shift){
+static OPUS_INLINE opus_int32 silk_ADD_RSHIFT(opus_int32 a, opus_int32 b, opus_int32 shift){
opus_int32 ret;
ops_count += 1;
ret = a + (b >> shift);
return ret; /* shift > 0*/
}
#undef silk_ADD_RSHIFT32
-static inline opus_int32 silk_ADD_RSHIFT32(opus_int32 a, opus_int32 b, opus_int32 shift){
+static OPUS_INLINE opus_int32 silk_ADD_RSHIFT32(opus_int32 a, opus_int32 b, opus_int32 shift){
opus_int32 ret;
ops_count += 1;
ret = a + (b >> shift);
return ret; /* shift > 0*/
}
#undef silk_ADD_RSHIFT_uint
-static inline opus_uint32 silk_ADD_RSHIFT_uint(opus_uint32 a, opus_uint32 b, opus_int32 shift){
+static OPUS_INLINE opus_uint32 silk_ADD_RSHIFT_uint(opus_uint32 a, opus_uint32 b, opus_int32 shift){
opus_uint32 ret;
ops_count += 1;
ret = a + (b >> shift);
return ret; /* shift > 0*/
}
#undef silk_SUB_LSHIFT32
-static inline opus_int32 silk_SUB_LSHIFT32(opus_int32 a, opus_int32 b, opus_int32 shift){
+static OPUS_INLINE opus_int32 silk_SUB_LSHIFT32(opus_int32 a, opus_int32 b, opus_int32 shift){
opus_int32 ret;
ops_count += 1;
ret = a - (b << shift);
return ret; /* shift >= 0*/
}
#undef silk_SUB_RSHIFT32
-static inline opus_int32 silk_SUB_RSHIFT32(opus_int32 a, opus_int32 b, opus_int32 shift){
+static OPUS_INLINE opus_int32 silk_SUB_RSHIFT32(opus_int32 a, opus_int32 b, opus_int32 shift){
opus_int32 ret;
ops_count += 1;
ret = a - (b >> shift);
@@ -453,7 +453,7 @@
}
#undef silk_RSHIFT_ROUND
-static inline opus_int32 silk_RSHIFT_ROUND(opus_int32 a, opus_int32 shift){
+static OPUS_INLINE opus_int32 silk_RSHIFT_ROUND(opus_int32 a, opus_int32 shift){
opus_int32 ret;
ops_count += 3;
ret = shift == 1 ? (a >> 1) + (a & 1) : ((a >> (shift - 1)) + 1) >> 1;
@@ -461,7 +461,7 @@
}
#undef silk_RSHIFT_ROUND64
-static inline opus_int64 silk_RSHIFT_ROUND64(opus_int64 a, opus_int32 shift){
+static OPUS_INLINE opus_int64 silk_RSHIFT_ROUND64(opus_int64 a, opus_int32 shift){
opus_int64 ret;
ops_count += 6;
ret = shift == 1 ? (a >> 1) + (a & 1) : ((a >> (shift - 1)) + 1) >> 1;
@@ -469,13 +469,13 @@
}
#undef silk_abs_int64
-static inline opus_int64 silk_abs_int64(opus_int64 a){
+static OPUS_INLINE opus_int64 silk_abs_int64(opus_int64 a){
ops_count += 1;
return (((a) > 0) ? (a) : -(a)); /* Be careful, silk_abs returns wrong when input equals to silk_intXX_MIN*/
}
#undef silk_abs_int32
-static inline opus_int32 silk_abs_int32(opus_int32 a){
+static OPUS_INLINE opus_int32 silk_abs_int32(opus_int32 a){
ops_count += 1;
return silk_abs(a);
}
@@ -498,7 +498,7 @@
}
#undef silk_ADD16
-static inline opus_int16 silk_ADD16(opus_int16 a, opus_int16 b){
+static OPUS_INLINE opus_int16 silk_ADD16(opus_int16 a, opus_int16 b){
opus_int16 ret;
ops_count += 1;
ret = a + b;
@@ -506,7 +506,7 @@
}
#undef silk_ADD32
-static inline opus_int32 silk_ADD32(opus_int32 a, opus_int32 b){
+static OPUS_INLINE opus_int32 silk_ADD32(opus_int32 a, opus_int32 b){
opus_int32 ret;
ops_count += 1;
ret = a + b;
@@ -514,7 +514,7 @@
}
#undef silk_ADD64
-static inline opus_int64 silk_ADD64(opus_int64 a, opus_int64 b){
+static OPUS_INLINE opus_int64 silk_ADD64(opus_int64 a, opus_int64 b){
opus_int64 ret;
ops_count += 2;
ret = a + b;
@@ -522,7 +522,7 @@
}
#undef silk_SUB16
-static inline opus_int16 silk_SUB16(opus_int16 a, opus_int16 b){
+static OPUS_INLINE opus_int16 silk_SUB16(opus_int16 a, opus_int16 b){
opus_int16 ret;
ops_count += 1;
ret = a - b;
@@ -530,7 +530,7 @@
}
#undef silk_SUB32
-static inline opus_int32 silk_SUB32(opus_int32 a, opus_int32 b){
+static OPUS_INLINE opus_int32 silk_SUB32(opus_int32 a, opus_int32 b){
opus_int32 ret;
ops_count += 1;
ret = a - b;
@@ -538,7 +538,7 @@
}
#undef silk_SUB64
-static inline opus_int64 silk_SUB64(opus_int64 a, opus_int64 b){
+static OPUS_INLINE opus_int64 silk_SUB64(opus_int64 a, opus_int64 b){
opus_int64 ret;
ops_count += 2;
ret = a - b;
@@ -546,7 +546,7 @@
}
#undef silk_ADD_SAT16
-static inline opus_int16 silk_ADD_SAT16( opus_int16 a16, opus_int16 b16 ) {
+static OPUS_INLINE opus_int16 silk_ADD_SAT16( opus_int16 a16, opus_int16 b16 ) {
opus_int16 res;
/* Nb will be counted in AKP_add32 and silk_SAT16*/
res = (opus_int16)silk_SAT16( silk_ADD32( (opus_int32)(a16), (b16) ) );
@@ -554,7 +554,7 @@
}
#undef silk_ADD_SAT32
-static inline opus_int32 silk_ADD_SAT32(opus_int32 a32, opus_int32 b32){
+static OPUS_INLINE opus_int32 silk_ADD_SAT32(opus_int32 a32, opus_int32 b32){
opus_int32 res;
ops_count += 1;
res = ((((a32) + (b32)) & 0x80000000) == 0 ? \
@@ -564,7 +564,7 @@
}
#undef silk_ADD_SAT64
-static inline opus_int64 silk_ADD_SAT64( opus_int64 a64, opus_int64 b64 ) {
+static OPUS_INLINE opus_int64 silk_ADD_SAT64( opus_int64 a64, opus_int64 b64 ) {
opus_int64 res;
ops_count += 1;
res = ((((a64) + (b64)) & 0x8000000000000000LL) == 0 ? \
@@ -574,7 +574,7 @@
}
#undef silk_SUB_SAT16
-static inline opus_int16 silk_SUB_SAT16( opus_int16 a16, opus_int16 b16 ) {
+static OPUS_INLINE opus_int16 silk_SUB_SAT16( opus_int16 a16, opus_int16 b16 ) {
opus_int16 res;
silk_assert(0);
/* Nb will be counted in sub-macros*/
@@ -583,7 +583,7 @@
}
#undef silk_SUB_SAT32
-static inline opus_int32 silk_SUB_SAT32( opus_int32 a32, opus_int32 b32 ) {
+static OPUS_INLINE opus_int32 silk_SUB_SAT32( opus_int32 a32, opus_int32 b32 ) {
opus_int32 res;
ops_count += 1;
res = ((((a32)-(b32)) & 0x80000000) == 0 ? \
@@ -593,7 +593,7 @@
}
#undef silk_SUB_SAT64
-static inline opus_int64 silk_SUB_SAT64( opus_int64 a64, opus_int64 b64 ) {
+static OPUS_INLINE opus_int64 silk_SUB_SAT64( opus_int64 a64, opus_int64 b64 ) {
opus_int64 res;
ops_count += 1;
res = ((((a64)-(b64)) & 0x8000000000000000LL) == 0 ? \
@@ -604,7 +604,7 @@
}
#undef silk_SMULWW
-static inline opus_int32 silk_SMULWW(opus_int32 a32, opus_int32 b32){
+static OPUS_INLINE opus_int32 silk_SMULWW(opus_int32 a32, opus_int32 b32){
opus_int32 ret;
/* Nb will be counted in sub-macros*/
ret = silk_MLA(silk_SMULWB((a32), (b32)), (a32), silk_RSHIFT_ROUND((b32), 16));
@@ -612,7 +612,7 @@
}
#undef silk_SMLAWW
-static inline opus_int32 silk_SMLAWW(opus_int32 a32, opus_int32 b32, opus_int32 c32){
+static OPUS_INLINE opus_int32 silk_SMLAWW(opus_int32 a32, opus_int32 b32, opus_int32 c32){
opus_int32 ret;
/* Nb will be counted in sub-macros*/
ret = silk_MLA(silk_SMLAWB((a32), (b32), (c32)), (b32), silk_RSHIFT_ROUND((c32), 16));
@@ -620,26 +620,26 @@
}
#undef silk_min_int
-static inline opus_int silk_min_int(opus_int a, opus_int b)
+static OPUS_INLINE opus_int silk_min_int(opus_int a, opus_int b)
{
ops_count += 1;
return (((a) < (b)) ? (a) : (b));
}
#undef silk_min_16
-static inline opus_int16 silk_min_16(opus_int16 a, opus_int16 b)
+static OPUS_INLINE opus_int16 silk_min_16(opus_int16 a, opus_int16 b)
{
ops_count += 1;
return (((a) < (b)) ? (a) : (b));
}
#undef silk_min_32
-static inline opus_int32 silk_min_32(opus_int32 a, opus_int32 b)
+static OPUS_INLINE opus_int32 silk_min_32(opus_int32 a, opus_int32 b)
{
ops_count += 1;
return (((a) < (b)) ? (a) : (b));
}
#undef silk_min_64
-static inline opus_int64 silk_min_64(opus_int64 a, opus_int64 b)
+static OPUS_INLINE opus_int64 silk_min_64(opus_int64 a, opus_int64 b)
{
ops_count += 1;
return (((a) < (b)) ? (a) : (b));
@@ -647,26 +647,26 @@
/* silk_min() versions with typecast in the function call */
#undef silk_max_int
-static inline opus_int silk_max_int(opus_int a, opus_int b)
+static OPUS_INLINE opus_int silk_max_int(opus_int a, opus_int b)
{
ops_count += 1;
return (((a) > (b)) ? (a) : (b));
}
#undef silk_max_16
-static inline opus_int16 silk_max_16(opus_int16 a, opus_int16 b)
+static OPUS_INLINE opus_int16 silk_max_16(opus_int16 a, opus_int16 b)
{
ops_count += 1;
return (((a) > (b)) ? (a) : (b));
}
#undef silk_max_32
-static inline opus_int32 silk_max_32(opus_int32 a, opus_int32 b)
+static OPUS_INLINE opus_int32 silk_max_32(opus_int32 a, opus_int32 b)
{
ops_count += 1;
return (((a) > (b)) ? (a) : (b));
}
#undef silk_max_64
-static inline opus_int64 silk_max_64(opus_int64 a, opus_int64 b)
+static OPUS_INLINE opus_int64 silk_max_64(opus_int64 a, opus_int64 b)
{
ops_count += 1;
return (((a) > (b)) ? (a) : (b));
@@ -674,7 +674,7 @@
#undef silk_LIMIT_int
-static inline opus_int silk_LIMIT_int(opus_int a, opus_int limit1, opus_int limit2)
+static OPUS_INLINE opus_int silk_LIMIT_int(opus_int a, opus_int limit1, opus_int limit2)
{
opus_int ret;
ops_count += 6;
@@ -686,7 +686,7 @@
}
#undef silk_LIMIT_16
-static inline opus_int16 silk_LIMIT_16(opus_int16 a, opus_int16 limit1, opus_int16 limit2)
+static OPUS_INLINE opus_int16 silk_LIMIT_16(opus_int16 a, opus_int16 limit1, opus_int16 limit2)
{
opus_int16 ret;
ops_count += 6;
@@ -699,7 +699,7 @@
#undef silk_LIMIT_32
-static inline opus_int silk_LIMIT_32(opus_int32 a, opus_int32 limit1, opus_int32 limit2)
+static OPUS_INLINE opus_int silk_LIMIT_32(opus_int32 a, opus_int32 limit1, opus_int32 limit2)
{
opus_int32 ret;
ops_count += 6;
diff --git a/silk/MacroDebug.h b/silk/MacroDebug.h
index 9c29576..35aedc5 100644
--- a/silk/MacroDebug.h
+++ b/silk/MacroDebug.h
@@ -36,7 +36,7 @@
#undef silk_ADD16
#define silk_ADD16(a,b) silk_ADD16_((a), (b), __FILE__, __LINE__)
-static inline opus_int16 silk_ADD16_(opus_int16 a, opus_int16 b, char *file, int line){
+static OPUS_INLINE opus_int16 silk_ADD16_(opus_int16 a, opus_int16 b, char *file, int line){
opus_int16 ret;
ret = a + b;
@@ -52,7 +52,7 @@
#undef silk_ADD32
#define silk_ADD32(a,b) silk_ADD32_((a), (b), __FILE__, __LINE__)
-static inline opus_int32 silk_ADD32_(opus_int32 a, opus_int32 b, char *file, int line){
+static OPUS_INLINE opus_int32 silk_ADD32_(opus_int32 a, opus_int32 b, char *file, int line){
opus_int32 ret;
ret = a + b;
@@ -68,7 +68,7 @@
#undef silk_ADD64
#define silk_ADD64(a,b) silk_ADD64_((a), (b), __FILE__, __LINE__)
-static inline opus_int64 silk_ADD64_(opus_int64 a, opus_int64 b, char *file, int line){
+static OPUS_INLINE opus_int64 silk_ADD64_(opus_int64 a, opus_int64 b, char *file, int line){
opus_int64 ret;
ret = a + b;
@@ -84,7 +84,7 @@
#undef silk_SUB16
#define silk_SUB16(a,b) silk_SUB16_((a), (b), __FILE__, __LINE__)
-static inline opus_int16 silk_SUB16_(opus_int16 a, opus_int16 b, char *file, int line){
+static OPUS_INLINE opus_int16 silk_SUB16_(opus_int16 a, opus_int16 b, char *file, int line){
opus_int16 ret;
ret = a - b;
@@ -100,7 +100,7 @@
#undef silk_SUB32
#define silk_SUB32(a,b) silk_SUB32_((a), (b), __FILE__, __LINE__)
-static inline opus_int32 silk_SUB32_(opus_int32 a, opus_int32 b, char *file, int line){
+static OPUS_INLINE opus_int32 silk_SUB32_(opus_int32 a, opus_int32 b, char *file, int line){
opus_int32 ret;
ret = a - b;
@@ -116,7 +116,7 @@
#undef silk_SUB64
#define silk_SUB64(a,b) silk_SUB64_((a), (b), __FILE__, __LINE__)
-static inline opus_int64 silk_SUB64_(opus_int64 a, opus_int64 b, char *file, int line){
+static OPUS_INLINE opus_int64 silk_SUB64_(opus_int64 a, opus_int64 b, char *file, int line){
opus_int64 ret;
ret = a - b;
@@ -132,7 +132,7 @@
#undef silk_ADD_SAT16
#define silk_ADD_SAT16(a,b) silk_ADD_SAT16_((a), (b), __FILE__, __LINE__)
-static inline opus_int16 silk_ADD_SAT16_( opus_int16 a16, opus_int16 b16, char *file, int line) {
+static OPUS_INLINE opus_int16 silk_ADD_SAT16_( opus_int16 a16, opus_int16 b16, char *file, int line) {
opus_int16 res;
res = (opus_int16)silk_SAT16( silk_ADD32( (opus_int32)(a16), (b16) ) );
if ( res != silk_SAT16( (opus_int32)a16 + (opus_int32)b16 ) )
@@ -147,7 +147,7 @@
#undef silk_ADD_SAT32
#define silk_ADD_SAT32(a,b) silk_ADD_SAT32_((a), (b), __FILE__, __LINE__)
-static inline opus_int32 silk_ADD_SAT32_(opus_int32 a32, opus_int32 b32, char *file, int line){
+static OPUS_INLINE opus_int32 silk_ADD_SAT32_(opus_int32 a32, opus_int32 b32, char *file, int line){
opus_int32 res;
res = ((((opus_uint32)(a32) + (opus_uint32)(b32)) & 0x80000000) == 0 ? \
((((a32) & (b32)) & 0x80000000) != 0 ? silk_int32_MIN : (a32)+(b32)) : \
@@ -164,7 +164,7 @@
#undef silk_ADD_SAT64
#define silk_ADD_SAT64(a,b) silk_ADD_SAT64_((a), (b), __FILE__, __LINE__)
-static inline opus_int64 silk_ADD_SAT64_( opus_int64 a64, opus_int64 b64, char *file, int line) {
+static OPUS_INLINE opus_int64 silk_ADD_SAT64_( opus_int64 a64, opus_int64 b64, char *file, int line) {
opus_int64 res;
int fail = 0;
res = ((((a64) + (b64)) & 0x8000000000000000LL) == 0 ? \
@@ -193,7 +193,7 @@
#undef silk_SUB_SAT16
#define silk_SUB_SAT16(a,b) silk_SUB_SAT16_((a), (b), __FILE__, __LINE__)
-static inline opus_int16 silk_SUB_SAT16_( opus_int16 a16, opus_int16 b16, char *file, int line ) {
+static OPUS_INLINE opus_int16 silk_SUB_SAT16_( opus_int16 a16, opus_int16 b16, char *file, int line ) {
opus_int16 res;
res = (opus_int16)silk_SAT16( silk_SUB32( (opus_int32)(a16), (b16) ) );
if ( res != silk_SAT16( (opus_int32)a16 - (opus_int32)b16 ) )
@@ -208,7 +208,7 @@
#undef silk_SUB_SAT32
#define silk_SUB_SAT32(a,b) silk_SUB_SAT32_((a), (b), __FILE__, __LINE__)
-static inline opus_int32 silk_SUB_SAT32_( opus_int32 a32, opus_int32 b32, char *file, int line ) {
+static OPUS_INLINE opus_int32 silk_SUB_SAT32_( opus_int32 a32, opus_int32 b32, char *file, int line ) {
opus_int32 res;
res = ((((opus_uint32)(a32)-(opus_uint32)(b32)) & 0x80000000) == 0 ? \
(( (a32) & ((b32)^0x80000000) & 0x80000000) ? silk_int32_MIN : (a32)-(b32)) : \
@@ -225,7 +225,7 @@
#undef silk_SUB_SAT64
#define silk_SUB_SAT64(a,b) silk_SUB_SAT64_((a), (b), __FILE__, __LINE__)
-static inline opus_int64 silk_SUB_SAT64_( opus_int64 a64, opus_int64 b64, char *file, int line ) {
+static OPUS_INLINE opus_int64 silk_SUB_SAT64_( opus_int64 a64, opus_int64 b64, char *file, int line ) {
opus_int64 res;
int fail = 0;
res = ((((a64)-(b64)) & 0x8000000000000000LL) == 0 ? \
@@ -254,7 +254,7 @@
#undef silk_MUL
#define silk_MUL(a,b) silk_MUL_((a), (b), __FILE__, __LINE__)
-static inline opus_int32 silk_MUL_(opus_int32 a32, opus_int32 b32, char *file, int line){
+static OPUS_INLINE opus_int32 silk_MUL_(opus_int32 a32, opus_int32 b32, char *file, int line){
opus_int32 ret;
opus_int64 ret64;
ret = a32 * b32;
@@ -271,7 +271,7 @@
#undef silk_MUL_uint
#define silk_MUL_uint(a,b) silk_MUL_uint_((a), (b), __FILE__, __LINE__)
-static inline opus_uint32 silk_MUL_uint_(opus_uint32 a32, opus_uint32 b32, char *file, int line){
+static OPUS_INLINE opus_uint32 silk_MUL_uint_(opus_uint32 a32, opus_uint32 b32, char *file, int line){
opus_uint32 ret;
ret = a32 * b32;
if ( (opus_uint64)ret != (opus_uint64)a32 * (opus_uint64)b32 )
@@ -286,7 +286,7 @@
#undef silk_MLA
#define silk_MLA(a,b,c) silk_MLA_((a), (b), (c), __FILE__, __LINE__)
-static inline opus_int32 silk_MLA_(opus_int32 a32, opus_int32 b32, opus_int32 c32, char *file, int line){
+static OPUS_INLINE opus_int32 silk_MLA_(opus_int32 a32, opus_int32 b32, opus_int32 c32, char *file, int line){
opus_int32 ret;
ret = a32 + b32 * c32;
if ( (opus_int64)ret != (opus_int64)a32 + (opus_int64)b32 * (opus_int64)c32 )
@@ -301,7 +301,7 @@
#undef silk_MLA_uint
#define silk_MLA_uint(a,b,c) silk_MLA_uint_((a), (b), (c), __FILE__, __LINE__)
-static inline opus_int32 silk_MLA_uint_(opus_uint32 a32, opus_uint32 b32, opus_uint32 c32, char *file, int line){
+static OPUS_INLINE opus_int32 silk_MLA_uint_(opus_uint32 a32, opus_uint32 b32, opus_uint32 c32, char *file, int line){
opus_uint32 ret;
ret = a32 + b32 * c32;
if ( (opus_int64)ret != (opus_int64)a32 + (opus_int64)b32 * (opus_int64)c32 )
@@ -316,7 +316,7 @@
#undef silk_SMULWB
#define silk_SMULWB(a,b) silk_SMULWB_((a), (b), __FILE__, __LINE__)
-static inline opus_int32 silk_SMULWB_(opus_int32 a32, opus_int32 b32, char *file, int line){
+static OPUS_INLINE opus_int32 silk_SMULWB_(opus_int32 a32, opus_int32 b32, char *file, int line){
opus_int32 ret;
ret = (a32 >> 16) * (opus_int32)((opus_int16)b32) + (((a32 & 0x0000FFFF) * (opus_int32)((opus_int16)b32)) >> 16);
if ( (opus_int64)ret != ((opus_int64)a32 * (opus_int16)b32) >> 16 )
@@ -331,7 +331,7 @@
#undef silk_SMLAWB
#define silk_SMLAWB(a,b,c) silk_SMLAWB_((a), (b), (c), __FILE__, __LINE__)
-static inline opus_int32 silk_SMLAWB_(opus_int32 a32, opus_int32 b32, opus_int32 c32, char *file, int line){
+static OPUS_INLINE opus_int32 silk_SMLAWB_(opus_int32 a32, opus_int32 b32, opus_int32 c32, char *file, int line){
opus_int32 ret;
ret = silk_ADD32( a32, silk_SMULWB( b32, c32 ) );
if ( silk_ADD32( a32, silk_SMULWB( b32, c32 ) ) != silk_ADD_SAT32( a32, silk_SMULWB( b32, c32 ) ) )
@@ -346,7 +346,7 @@
#undef silk_SMULWT
#define silk_SMULWT(a,b) silk_SMULWT_((a), (b), __FILE__, __LINE__)
-static inline opus_int32 silk_SMULWT_(opus_int32 a32, opus_int32 b32, char *file, int line){
+static OPUS_INLINE opus_int32 silk_SMULWT_(opus_int32 a32, opus_int32 b32, char *file, int line){
opus_int32 ret;
ret = (a32 >> 16) * (b32 >> 16) + (((a32 & 0x0000FFFF) * (b32 >> 16)) >> 16);
if ( (opus_int64)ret != ((opus_int64)a32 * (b32 >> 16)) >> 16 )
@@ -361,7 +361,7 @@
#undef silk_SMLAWT
#define silk_SMLAWT(a,b,c) silk_SMLAWT_((a), (b), (c), __FILE__, __LINE__)
-static inline opus_int32 silk_SMLAWT_(opus_int32 a32, opus_int32 b32, opus_int32 c32, char *file, int line){
+static OPUS_INLINE opus_int32 silk_SMLAWT_(opus_int32 a32, opus_int32 b32, opus_int32 c32, char *file, int line){
opus_int32 ret;
ret = a32 + ((b32 >> 16) * (c32 >> 16)) + (((b32 & 0x0000FFFF) * ((c32 >> 16)) >> 16));
if ( (opus_int64)ret != (opus_int64)a32 + (((opus_int64)b32 * (c32 >> 16)) >> 16) )
@@ -376,7 +376,7 @@
#undef silk_SMULL
#define silk_SMULL(a,b) silk_SMULL_((a), (b), __FILE__, __LINE__)
-static inline opus_int64 silk_SMULL_(opus_int64 a64, opus_int64 b64, char *file, int line){
+static OPUS_INLINE opus_int64 silk_SMULL_(opus_int64 a64, opus_int64 b64, char *file, int line){
opus_int64 ret64;
int fail = 0;
ret64 = a64 * b64;
@@ -398,7 +398,7 @@
/* no checking needed for silk_SMULBB */
#undef silk_SMLABB
#define silk_SMLABB(a,b,c) silk_SMLABB_((a), (b), (c), __FILE__, __LINE__)
-static inline opus_int32 silk_SMLABB_(opus_int32 a32, opus_int32 b32, opus_int32 c32, char *file, int line){
+static OPUS_INLINE opus_int32 silk_SMLABB_(opus_int32 a32, opus_int32 b32, opus_int32 c32, char *file, int line){
opus_int32 ret;
ret = a32 + (opus_int32)((opus_int16)b32) * (opus_int32)((opus_int16)c32);
if ( (opus_int64)ret != (opus_int64)a32 + (opus_int64)b32 * (opus_int16)c32 )
@@ -414,7 +414,7 @@
/* no checking needed for silk_SMULBT */
#undef silk_SMLABT
#define silk_SMLABT(a,b,c) silk_SMLABT_((a), (b), (c), __FILE__, __LINE__)
-static inline opus_int32 silk_SMLABT_(opus_int32 a32, opus_int32 b32, opus_int32 c32, char *file, int line){
+static OPUS_INLINE opus_int32 silk_SMLABT_(opus_int32 a32, opus_int32 b32, opus_int32 c32, char *file, int line){
opus_int32 ret;
ret = a32 + ((opus_int32)((opus_int16)b32)) * (c32 >> 16);
if ( (opus_int64)ret != (opus_int64)a32 + (opus_int64)b32 * (c32 >> 16) )
@@ -430,7 +430,7 @@
/* no checking needed for silk_SMULTT */
#undef silk_SMLATT
#define silk_SMLATT(a,b,c) silk_SMLATT_((a), (b), (c), __FILE__, __LINE__)
-static inline opus_int32 silk_SMLATT_(opus_int32 a32, opus_int32 b32, opus_int32 c32, char *file, int line){
+static OPUS_INLINE opus_int32 silk_SMLATT_(opus_int32 a32, opus_int32 b32, opus_int32 c32, char *file, int line){
opus_int32 ret;
ret = a32 + (b32 >> 16) * (c32 >> 16);
if ( (opus_int64)ret != (opus_int64)a32 + (b32 >> 16) * (c32 >> 16) )
@@ -445,7 +445,7 @@
#undef silk_SMULWW
#define silk_SMULWW(a,b) silk_SMULWW_((a), (b), __FILE__, __LINE__)
-static inline opus_int32 silk_SMULWW_(opus_int32 a32, opus_int32 b32, char *file, int line){
+static OPUS_INLINE opus_int32 silk_SMULWW_(opus_int32 a32, opus_int32 b32, char *file, int line){
opus_int32 ret, tmp1, tmp2;
opus_int64 ret64;
int fail = 0;
@@ -476,7 +476,7 @@
#undef silk_SMLAWW
#define silk_SMLAWW(a,b,c) silk_SMLAWW_((a), (b), (c), __FILE__, __LINE__)
-static inline opus_int32 silk_SMLAWW_(opus_int32 a32, opus_int32 b32, opus_int32 c32, char *file, int line){
+static OPUS_INLINE opus_int32 silk_SMLAWW_(opus_int32 a32, opus_int32 b32, opus_int32 c32, char *file, int line){
opus_int32 ret, tmp;
tmp = silk_SMULWW( b32, c32 );
@@ -505,7 +505,7 @@
#undef silk_DIV32
#define silk_DIV32(a,b) silk_DIV32_((a), (b), __FILE__, __LINE__)
-static inline opus_int32 silk_DIV32_(opus_int32 a32, opus_int32 b32, char *file, int line){
+static OPUS_INLINE opus_int32 silk_DIV32_(opus_int32 a32, opus_int32 b32, char *file, int line){
if ( b32 == 0 )
{
fprintf (stderr, "silk_DIV32(%d, %d) in %s: line %d\n", a32, b32, file, line);
@@ -518,7 +518,7 @@
#undef silk_DIV32_16
#define silk_DIV32_16(a,b) silk_DIV32_16_((a), (b), __FILE__, __LINE__)
-static inline opus_int32 silk_DIV32_16_(opus_int32 a32, opus_int32 b32, char *file, int line){
+static OPUS_INLINE opus_int32 silk_DIV32_16_(opus_int32 a32, opus_int32 b32, char *file, int line){
int fail = 0;
fail |= b32 == 0;
fail |= b32 > silk_int16_MAX;
@@ -544,7 +544,7 @@
#undef silk_LSHIFT8
#define silk_LSHIFT8(a,b) silk_LSHIFT8_((a), (b), __FILE__, __LINE__)
-static inline opus_int8 silk_LSHIFT8_(opus_int8 a, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_int8 silk_LSHIFT8_(opus_int8 a, opus_int32 shift, char *file, int line){
opus_int8 ret;
int fail = 0;
ret = a << shift;
@@ -563,7 +563,7 @@
#undef silk_LSHIFT16
#define silk_LSHIFT16(a,b) silk_LSHIFT16_((a), (b), __FILE__, __LINE__)
-static inline opus_int16 silk_LSHIFT16_(opus_int16 a, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_int16 silk_LSHIFT16_(opus_int16 a, opus_int32 shift, char *file, int line){
opus_int16 ret;
int fail = 0;
ret = a << shift;
@@ -582,7 +582,7 @@
#undef silk_LSHIFT32
#define silk_LSHIFT32(a,b) silk_LSHIFT32_((a), (b), __FILE__, __LINE__)
-static inline opus_int32 silk_LSHIFT32_(opus_int32 a, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_int32 silk_LSHIFT32_(opus_int32 a, opus_int32 shift, char *file, int line){
opus_int32 ret;
int fail = 0;
ret = a << shift;
@@ -601,7 +601,7 @@
#undef silk_LSHIFT64
#define silk_LSHIFT64(a,b) silk_LSHIFT64_((a), (b), __FILE__, __LINE__)
-static inline opus_int64 silk_LSHIFT64_(opus_int64 a, opus_int shift, char *file, int line){
+static OPUS_INLINE opus_int64 silk_LSHIFT64_(opus_int64 a, opus_int shift, char *file, int line){
opus_int64 ret;
int fail = 0;
ret = a << shift;
@@ -620,7 +620,7 @@
#undef silk_LSHIFT_ovflw
#define silk_LSHIFT_ovflw(a,b) silk_LSHIFT_ovflw_((a), (b), __FILE__, __LINE__)
-static inline opus_int32 silk_LSHIFT_ovflw_(opus_int32 a, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_int32 silk_LSHIFT_ovflw_(opus_int32 a, opus_int32 shift, char *file, int line){
if ( (shift < 0) || (shift >= 32) ) /* no check for overflow */
{
fprintf (stderr, "silk_LSHIFT_ovflw(%d, %d) in %s: line %d\n", a, shift, file, line);
@@ -633,7 +633,7 @@
#undef silk_LSHIFT_uint
#define silk_LSHIFT_uint(a,b) silk_LSHIFT_uint_((a), (b), __FILE__, __LINE__)
-static inline opus_uint32 silk_LSHIFT_uint_(opus_uint32 a, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_uint32 silk_LSHIFT_uint_(opus_uint32 a, opus_int32 shift, char *file, int line){
opus_uint32 ret;
ret = a << shift;
if ( (shift < 0) || ((opus_int64)ret != ((opus_int64)a) << shift))
@@ -648,7 +648,7 @@
#undef silk_RSHIFT8
#define silk_RSHITF8(a,b) silk_RSHIFT8_((a), (b), __FILE__, __LINE__)
-static inline opus_int8 silk_RSHIFT8_(opus_int8 a, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_int8 silk_RSHIFT8_(opus_int8 a, opus_int32 shift, char *file, int line){
if ( (shift < 0) || (shift>=8) )
{
fprintf (stderr, "silk_RSHITF8(%d, %d) in %s: line %d\n", a, shift, file, line);
@@ -661,7 +661,7 @@
#undef silk_RSHIFT16
#define silk_RSHITF16(a,b) silk_RSHIFT16_((a), (b), __FILE__, __LINE__)
-static inline opus_int16 silk_RSHIFT16_(opus_int16 a, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_int16 silk_RSHIFT16_(opus_int16 a, opus_int32 shift, char *file, int line){
if ( (shift < 0) || (shift>=16) )
{
fprintf (stderr, "silk_RSHITF16(%d, %d) in %s: line %d\n", a, shift, file, line);
@@ -674,7 +674,7 @@
#undef silk_RSHIFT32
#define silk_RSHIFT32(a,b) silk_RSHIFT32_((a), (b), __FILE__, __LINE__)
-static inline opus_int32 silk_RSHIFT32_(opus_int32 a, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_int32 silk_RSHIFT32_(opus_int32 a, opus_int32 shift, char *file, int line){
if ( (shift < 0) || (shift>=32) )
{
fprintf (stderr, "silk_RSHITF32(%d, %d) in %s: line %d\n", a, shift, file, line);
@@ -687,7 +687,7 @@
#undef silk_RSHIFT64
#define silk_RSHIFT64(a,b) silk_RSHIFT64_((a), (b), __FILE__, __LINE__)
-static inline opus_int64 silk_RSHIFT64_(opus_int64 a, opus_int64 shift, char *file, int line){
+static OPUS_INLINE opus_int64 silk_RSHIFT64_(opus_int64 a, opus_int64 shift, char *file, int line){
if ( (shift < 0) || (shift>=64) )
{
fprintf (stderr, "silk_RSHITF64(%lld, %lld) in %s: line %d\n", (long long)a, (long long)shift, file, line);
@@ -700,7 +700,7 @@
#undef silk_RSHIFT_uint
#define silk_RSHIFT_uint(a,b) silk_RSHIFT_uint_((a), (b), __FILE__, __LINE__)
-static inline opus_uint32 silk_RSHIFT_uint_(opus_uint32 a, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_uint32 silk_RSHIFT_uint_(opus_uint32 a, opus_int32 shift, char *file, int line){
if ( (shift < 0) || (shift>32) )
{
fprintf (stderr, "silk_RSHIFT_uint(%u, %d) in %s: line %d\n", a, shift, file, line);
@@ -713,7 +713,7 @@
#undef silk_ADD_LSHIFT
#define silk_ADD_LSHIFT(a,b,c) silk_ADD_LSHIFT_((a), (b), (c), __FILE__, __LINE__)
-static inline int silk_ADD_LSHIFT_(int a, int b, int shift, char *file, int line){
+static OPUS_INLINE int silk_ADD_LSHIFT_(int a, int b, int shift, char *file, int line){
opus_int16 ret;
ret = a + (b << shift);
if ( (shift < 0) || (shift>15) || ((opus_int64)ret != (opus_int64)a + (((opus_int64)b) << shift)) )
@@ -728,7 +728,7 @@
#undef silk_ADD_LSHIFT32
#define silk_ADD_LSHIFT32(a,b,c) silk_ADD_LSHIFT32_((a), (b), (c), __FILE__, __LINE__)
-static inline opus_int32 silk_ADD_LSHIFT32_(opus_int32 a, opus_int32 b, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_int32 silk_ADD_LSHIFT32_(opus_int32 a, opus_int32 b, opus_int32 shift, char *file, int line){
opus_int32 ret;
ret = a + (b << shift);
if ( (shift < 0) || (shift>31) || ((opus_int64)ret != (opus_int64)a + (((opus_int64)b) << shift)) )
@@ -743,7 +743,7 @@
#undef silk_ADD_LSHIFT_uint
#define silk_ADD_LSHIFT_uint(a,b,c) silk_ADD_LSHIFT_uint_((a), (b), (c), __FILE__, __LINE__)
-static inline opus_uint32 silk_ADD_LSHIFT_uint_(opus_uint32 a, opus_uint32 b, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_uint32 silk_ADD_LSHIFT_uint_(opus_uint32 a, opus_uint32 b, opus_int32 shift, char *file, int line){
opus_uint32 ret;
ret = a + (b << shift);
if ( (shift < 0) || (shift>32) || ((opus_int64)ret != (opus_int64)a + (((opus_int64)b) << shift)) )
@@ -758,7 +758,7 @@
#undef silk_ADD_RSHIFT
#define silk_ADD_RSHIFT(a,b,c) silk_ADD_RSHIFT_((a), (b), (c), __FILE__, __LINE__)
-static inline int silk_ADD_RSHIFT_(int a, int b, int shift, char *file, int line){
+static OPUS_INLINE int silk_ADD_RSHIFT_(int a, int b, int shift, char *file, int line){
opus_int16 ret;
ret = a + (b >> shift);
if ( (shift < 0) || (shift>15) || ((opus_int64)ret != (opus_int64)a + (((opus_int64)b) >> shift)) )
@@ -773,7 +773,7 @@
#undef silk_ADD_RSHIFT32
#define silk_ADD_RSHIFT32(a,b,c) silk_ADD_RSHIFT32_((a), (b), (c), __FILE__, __LINE__)
-static inline opus_int32 silk_ADD_RSHIFT32_(opus_int32 a, opus_int32 b, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_int32 silk_ADD_RSHIFT32_(opus_int32 a, opus_int32 b, opus_int32 shift, char *file, int line){
opus_int32 ret;
ret = a + (b >> shift);
if ( (shift < 0) || (shift>31) || ((opus_int64)ret != (opus_int64)a + (((opus_int64)b) >> shift)) )
@@ -788,7 +788,7 @@
#undef silk_ADD_RSHIFT_uint
#define silk_ADD_RSHIFT_uint(a,b,c) silk_ADD_RSHIFT_uint_((a), (b), (c), __FILE__, __LINE__)
-static inline opus_uint32 silk_ADD_RSHIFT_uint_(opus_uint32 a, opus_uint32 b, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_uint32 silk_ADD_RSHIFT_uint_(opus_uint32 a, opus_uint32 b, opus_int32 shift, char *file, int line){
opus_uint32 ret;
ret = a + (b >> shift);
if ( (shift < 0) || (shift>32) || ((opus_int64)ret != (opus_int64)a + (((opus_int64)b) >> shift)) )
@@ -803,7 +803,7 @@
#undef silk_SUB_LSHIFT32
#define silk_SUB_LSHIFT32(a,b,c) silk_SUB_LSHIFT32_((a), (b), (c), __FILE__, __LINE__)
-static inline opus_int32 silk_SUB_LSHIFT32_(opus_int32 a, opus_int32 b, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_int32 silk_SUB_LSHIFT32_(opus_int32 a, opus_int32 b, opus_int32 shift, char *file, int line){
opus_int32 ret;
ret = a - (b << shift);
if ( (shift < 0) || (shift>31) || ((opus_int64)ret != (opus_int64)a - (((opus_int64)b) << shift)) )
@@ -818,7 +818,7 @@
#undef silk_SUB_RSHIFT32
#define silk_SUB_RSHIFT32(a,b,c) silk_SUB_RSHIFT32_((a), (b), (c), __FILE__, __LINE__)
-static inline opus_int32 silk_SUB_RSHIFT32_(opus_int32 a, opus_int32 b, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_int32 silk_SUB_RSHIFT32_(opus_int32 a, opus_int32 b, opus_int32 shift, char *file, int line){
opus_int32 ret;
ret = a - (b >> shift);
if ( (shift < 0) || (shift>31) || ((opus_int64)ret != (opus_int64)a - (((opus_int64)b) >> shift)) )
@@ -833,7 +833,7 @@
#undef silk_RSHIFT_ROUND
#define silk_RSHIFT_ROUND(a,b) silk_RSHIFT_ROUND_((a), (b), __FILE__, __LINE__)
-static inline opus_int32 silk_RSHIFT_ROUND_(opus_int32 a, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_int32 silk_RSHIFT_ROUND_(opus_int32 a, opus_int32 shift, char *file, int line){
opus_int32 ret;
ret = shift == 1 ? (a >> 1) + (a & 1) : ((a >> (shift - 1)) + 1) >> 1;
/* the marco definition can't handle a shift of zero */
@@ -849,7 +849,7 @@
#undef silk_RSHIFT_ROUND64
#define silk_RSHIFT_ROUND64(a,b) silk_RSHIFT_ROUND64_((a), (b), __FILE__, __LINE__)
-static inline opus_int64 silk_RSHIFT_ROUND64_(opus_int64 a, opus_int32 shift, char *file, int line){
+static OPUS_INLINE opus_int64 silk_RSHIFT_ROUND64_(opus_int64 a, opus_int32 shift, char *file, int line){
opus_int64 ret;
/* the marco definition can't handle a shift of zero */
if ( (shift <= 0) || (shift>=64) )
@@ -865,14 +865,14 @@
/* silk_abs is used on floats also, so doesn't work... */
/*#undef silk_abs
-static inline opus_int32 silk_abs(opus_int32 a){
+static OPUS_INLINE opus_int32 silk_abs(opus_int32 a){
silk_assert(a != 0x80000000);
return (((a) > 0) ? (a) : -(a)); // Be careful, silk_abs returns wrong when input equals to silk_intXX_MIN
}*/
#undef silk_abs_int64
#define silk_abs_int64(a) silk_abs_int64_((a), __FILE__, __LINE__)
-static inline opus_int64 silk_abs_int64_(opus_int64 a, char *file, int line){
+static OPUS_INLINE opus_int64 silk_abs_int64_(opus_int64 a, char *file, int line){
if ( a == silk_int64_MIN )
{
fprintf (stderr, "silk_abs_int64(%lld) in %s: line %d\n", (long long)a, file, line);
@@ -885,7 +885,7 @@
#undef silk_abs_int32
#define silk_abs_int32(a) silk_abs_int32_((a), __FILE__, __LINE__)
-static inline opus_int32 silk_abs_int32_(opus_int32 a, char *file, int line){
+static OPUS_INLINE opus_int32 silk_abs_int32_(opus_int32 a, char *file, int line){
if ( a == silk_int32_MIN )
{
fprintf (stderr, "silk_abs_int32(%d) in %s: line %d\n", a, file, line);
@@ -898,7 +898,7 @@
#undef silk_CHECK_FIT8
#define silk_CHECK_FIT8(a) silk_CHECK_FIT8_((a), __FILE__, __LINE__)
-static inline opus_int8 silk_CHECK_FIT8_( opus_int64 a, char *file, int line ){
+static OPUS_INLINE opus_int8 silk_CHECK_FIT8_( opus_int64 a, char *file, int line ){
opus_int8 ret;
ret = (opus_int8)a;
if ( (opus_int64)ret != a )
@@ -913,7 +913,7 @@
#undef silk_CHECK_FIT16
#define silk_CHECK_FIT16(a) silk_CHECK_FIT16_((a), __FILE__, __LINE__)
-static inline opus_int16 silk_CHECK_FIT16_( opus_int64 a, char *file, int line ){
+static OPUS_INLINE opus_int16 silk_CHECK_FIT16_( opus_int64 a, char *file, int line ){
opus_int16 ret;
ret = (opus_int16)a;
if ( (opus_int64)ret != a )
@@ -928,7 +928,7 @@
#undef silk_CHECK_FIT32
#define silk_CHECK_FIT32(a) silk_CHECK_FIT32_((a), __FILE__, __LINE__)
-static inline opus_int32 silk_CHECK_FIT32_( opus_int64 a, char *file, int line ){
+static OPUS_INLINE opus_int32 silk_CHECK_FIT32_( opus_int64 a, char *file, int line ){
opus_int32 ret;
ret = (opus_int32)a;
if ( (opus_int64)ret != a )
diff --git a/silk/NLSF2A.c b/silk/NLSF2A.c
index 06635f1..b1c559e 100644
--- a/silk/NLSF2A.c
+++ b/silk/NLSF2A.c
@@ -41,7 +41,7 @@
#define QA 16
/* helper function for NLSF2A(..) */
-static inline void silk_NLSF2A_find_poly(
+static OPUS_INLINE void silk_NLSF2A_find_poly(
opus_int32 *out, /* O intermediate polynomial, QA [dd+1] */
const opus_int32 *cLSF, /* I vector of interleaved 2*cos(LSFs), QA [d] */
opus_int dd /* I polynomial order (= 1/2 * filter order) */
diff --git a/silk/NLSF_decode.c b/silk/NLSF_decode.c
index 3839acd..9f71506 100644
--- a/silk/NLSF_decode.c
+++ b/silk/NLSF_decode.c
@@ -32,7 +32,7 @@
#include "main.h"
/* Predictive dequantizer for NLSF residuals */
-static inline void silk_NLSF_residual_dequant( /* O Returns RD value in Q30 */
+static OPUS_INLINE void silk_NLSF_residual_dequant( /* O Returns RD value in Q30 */
opus_int16 x_Q10[], /* O Output [ order ] */
const opus_int8 indices[], /* I Quantization indices [ order ] */
const opus_uint8 pred_coef_Q8[], /* I Backward predictor coefs [ order ] */
diff --git a/silk/NLSF_del_dec_quant.c b/silk/NLSF_del_dec_quant.c
index 4139e8f..504dbbd 100644
--- a/silk/NLSF_del_dec_quant.c
+++ b/silk/NLSF_del_dec_quant.c
@@ -121,7 +121,7 @@
RD_Q25[ j + nStates ] = silk_SMLABB( silk_MLA( RD_tmp_Q25, silk_SMULBB( diff_Q10, diff_Q10 ), w_Q5[ i ] ), mu_Q20, rate1_Q5 );
}
- if( nStates < NLSF_QUANT_DEL_DEC_STATES ) {
+ if( nStates <= ( NLSF_QUANT_DEL_DEC_STATES >> 1 ) ) {
/* double number of states and copy */
for( j = 0; j < nStates; j++ ) {
ind[ j + nStates ][ i ] = ind[ j ][ i ] + 1;
diff --git a/silk/NSQ.c b/silk/NSQ.c
index 4f2b7fe..cf5b3fd 100644
--- a/silk/NSQ.c
+++ b/silk/NSQ.c
@@ -32,7 +32,7 @@
#include "main.h"
#include "stack_alloc.h"
-static inline void silk_nsq_scale_states(
+static OPUS_INLINE void silk_nsq_scale_states(
const silk_encoder_state *psEncC, /* I Encoder State */
silk_nsq_state *NSQ, /* I/O NSQ state */
const opus_int32 x_Q3[], /* I input in Q3 */
@@ -46,7 +46,7 @@
const opus_int signal_type /* I Signal type */
);
-static inline void silk_noise_shape_quantizer(
+static OPUS_INLINE void silk_noise_shape_quantizer(
silk_nsq_state *NSQ, /* I/O NSQ state */
opus_int signalType, /* I Signal type */
const opus_int32 x_sc_Q10[], /* I */
@@ -172,7 +172,7 @@
/***********************************/
/* silk_noise_shape_quantizer */
/***********************************/
-static inline void silk_noise_shape_quantizer(
+static OPUS_INLINE void silk_noise_shape_quantizer(
silk_nsq_state *NSQ, /* I/O NSQ state */
opus_int signalType, /* I Signal type */
const opus_int32 x_sc_Q10[], /* I */
@@ -370,7 +370,7 @@
silk_memcpy( NSQ->sLPC_Q14, &NSQ->sLPC_Q14[ length ], NSQ_LPC_BUF_LENGTH * sizeof( opus_int32 ) );
}
-static inline void silk_nsq_scale_states(
+static OPUS_INLINE void silk_nsq_scale_states(
const silk_encoder_state *psEncC, /* I Encoder State */
silk_nsq_state *NSQ, /* I/O NSQ state */
const opus_int32 x_Q3[], /* I input in Q3 */
diff --git a/silk/NSQ_del_dec.c b/silk/NSQ_del_dec.c
index a1b9606..522be40 100644
--- a/silk/NSQ_del_dec.c
+++ b/silk/NSQ_del_dec.c
@@ -57,7 +57,7 @@
typedef NSQ_sample_struct NSQ_sample_pair[ 2 ];
-static inline void silk_nsq_del_dec_scale_states(
+static OPUS_INLINE void silk_nsq_del_dec_scale_states(
const silk_encoder_state *psEncC, /* I Encoder State */
silk_nsq_state *NSQ, /* I/O NSQ state */
NSQ_del_dec_struct psDelDec[], /* I/O Delayed decision states */
@@ -77,7 +77,7 @@
/******************************************/
/* Noise shape quantizer for one subframe */
/******************************************/
-static inline void silk_noise_shape_quantizer_del_dec(
+static OPUS_INLINE void silk_noise_shape_quantizer_del_dec(
silk_nsq_state *NSQ, /* I/O NSQ state */
NSQ_del_dec_struct psDelDec[], /* I/O Delayed decision states */
opus_int signalType, /* I Signal type */
@@ -303,7 +303,7 @@
/******************************************/
/* Noise shape quantizer for one subframe */
/******************************************/
-static inline void silk_noise_shape_quantizer_del_dec(
+static OPUS_INLINE void silk_noise_shape_quantizer_del_dec(
silk_nsq_state *NSQ, /* I/O NSQ state */
NSQ_del_dec_struct psDelDec[], /* I/O Delayed decision states */
opus_int signalType, /* I Signal type */
@@ -630,7 +630,7 @@
RESTORE_STACK;
}
-static inline void silk_nsq_del_dec_scale_states(
+static OPUS_INLINE void silk_nsq_del_dec_scale_states(
const silk_encoder_state *psEncC, /* I Encoder State */
silk_nsq_state *NSQ, /* I/O NSQ state */
NSQ_del_dec_struct psDelDec[], /* I/O Delayed decision states */
diff --git a/silk/PLC.c b/silk/PLC.c
index 697ad05..01f4001 100644
--- a/silk/PLC.c
+++ b/silk/PLC.c
@@ -38,12 +38,12 @@
static const opus_int16 PLC_RAND_ATTENUATE_V_Q15[NB_ATT] = { 31130, 26214 }; /* 0.95, 0.8 */
static const opus_int16 PLC_RAND_ATTENUATE_UV_Q15[NB_ATT] = { 32440, 29491 }; /* 0.99, 0.9 */
-static inline void silk_PLC_update(
+static OPUS_INLINE void silk_PLC_update(
silk_decoder_state *psDec, /* I/O Decoder state */
silk_decoder_control *psDecCtrl /* I/O Decoder control */
);
-static inline void silk_PLC_conceal(
+static OPUS_INLINE void silk_PLC_conceal(
silk_decoder_state *psDec, /* I/O Decoder state */
silk_decoder_control *psDecCtrl, /* I/O Decoder control */
opus_int16 frame[] /* O LPC residual signal */
@@ -92,7 +92,7 @@
/**************************************************/
/* Update state of PLC */
/**************************************************/
-static inline void silk_PLC_update(
+static OPUS_INLINE void silk_PLC_update(
silk_decoder_state *psDec, /* I/O Decoder state */
silk_decoder_control *psDecCtrl /* I/O Decoder control */
)
@@ -165,7 +165,7 @@
psPLC->nb_subfr = psDec->nb_subfr;
}
-static inline void silk_PLC_conceal(
+static OPUS_INLINE void silk_PLC_conceal(
silk_decoder_state *psDec, /* I/O Decoder state */
silk_decoder_control *psDecCtrl, /* I/O Decoder control */
opus_int16 frame[] /* O LPC residual signal */
diff --git a/silk/SigProc_FIX.h b/silk/SigProc_FIX.h
index 3344ddb..1b58057 100644
--- a/silk/SigProc_FIX.h
+++ b/silk/SigProc_FIX.h
@@ -227,7 +227,8 @@
opus_int *scale, /* O Scaling of the correlation vector */
const opus_int16 *inputData, /* I Input data to correlate */
const opus_int inputDataSize, /* I Length of input */
- const opus_int correlationCount /* I Number of correlation taps to compute */
+ const opus_int correlationCount, /* I Number of correlation taps to compute */
+ int arch /* I Run-time architecture */
);
void silk_decode_pitch(
@@ -249,7 +250,8 @@
const opus_int search_thres2_Q13, /* I Final threshold for lag candidates 0 - 1 */
const opus_int Fs_kHz, /* I Sample frequency (kHz) */
const opus_int complexity, /* I Complexity setting, 0-2, where 2 is highest */
- const opus_int nb_subfr /* I number of 5 ms subframes */
+ const opus_int nb_subfr, /* I number of 5 ms subframes */
+ int arch /* I Run-time architecture */
);
/* Compute Normalized Line Spectral Frequencies (NLSFs) from whitening filter coefficients */
@@ -309,7 +311,8 @@
const opus_int32 minInvGain_Q30, /* I Inverse of max prediction gain */
const opus_int subfr_length, /* I Input signal subframe length (incl. D preceding samples) */
const opus_int nb_subfr, /* I Number of subframes stacked in x */
- const opus_int D /* I Order */
+ const opus_int D, /* I Order */
+ int arch /* I Run-time architecture */
);
/* Copy and multiply a vector by a constant */
@@ -358,8 +361,8 @@
/* Rotate a32 right by 'rot' bits. Negative rot values result in rotating
left. Output is 32bit int.
Note: contemporary compilers recognize the C expression below and
- compile it into a 'ror' instruction if available. No need for inline ASM! */
-static inline opus_int32 silk_ROR32( opus_int32 a32, opus_int rot )
+ compile it into a 'ror' instruction if available. No need for OPUS_INLINE ASM! */
+static OPUS_INLINE opus_int32 silk_ROR32( opus_int32 a32, opus_int rot )
{
opus_uint32 x = (opus_uint32) a32;
opus_uint32 r = (opus_uint32) rot;
@@ -508,37 +511,37 @@
#define SILK_FIX_CONST( C, Q ) ((opus_int32)((C) * ((opus_int64)1 << (Q)) + 0.5))
/* silk_min() versions with typecast in the function call */
-static inline opus_int silk_min_int(opus_int a, opus_int b)
+static OPUS_INLINE opus_int silk_min_int(opus_int a, opus_int b)
{
return (((a) < (b)) ? (a) : (b));
}
-static inline opus_int16 silk_min_16(opus_int16 a, opus_int16 b)
+static OPUS_INLINE opus_int16 silk_min_16(opus_int16 a, opus_int16 b)
{
return (((a) < (b)) ? (a) : (b));
}
-static inline opus_int32 silk_min_32(opus_int32 a, opus_int32 b)
+static OPUS_INLINE opus_int32 silk_min_32(opus_int32 a, opus_int32 b)
{
return (((a) < (b)) ? (a) : (b));
}
-static inline opus_int64 silk_min_64(opus_int64 a, opus_int64 b)
+static OPUS_INLINE opus_int64 silk_min_64(opus_int64 a, opus_int64 b)
{
return (((a) < (b)) ? (a) : (b));
}
/* silk_min() versions with typecast in the function call */
-static inline opus_int silk_max_int(opus_int a, opus_int b)
+static OPUS_INLINE opus_int silk_max_int(opus_int a, opus_int b)
{
return (((a) > (b)) ? (a) : (b));
}
-static inline opus_int16 silk_max_16(opus_int16 a, opus_int16 b)
+static OPUS_INLINE opus_int16 silk_max_16(opus_int16 a, opus_int16 b)
{
return (((a) > (b)) ? (a) : (b));
}
-static inline opus_int32 silk_max_32(opus_int32 a, opus_int32 b)
+static OPUS_INLINE opus_int32 silk_max_32(opus_int32 a, opus_int32 b)
{
return (((a) > (b)) ? (a) : (b));
}
-static inline opus_int64 silk_max_64(opus_int64 a, opus_int64 b)
+static OPUS_INLINE opus_int64 silk_max_64(opus_int64 a, opus_int64 b)
{
return (((a) > (b)) ? (a) : (b));
}
@@ -576,11 +579,11 @@
#include "MacroCount.h"
#include "MacroDebug.h"
-#ifdef ARMv4_ASM
+#ifdef OPUS_ARM_INLINE_ASM
#include "arm/SigProc_FIX_armv4.h"
#endif
-#ifdef ARMv5E_ASM
+#ifdef OPUS_ARM_INLINE_EDSP
#include "arm/SigProc_FIX_armv5e.h"
#endif
diff --git a/silk/VAD.c b/silk/VAD.c
index a9359e9..a809098 100644
--- a/silk/VAD.c
+++ b/silk/VAD.c
@@ -33,7 +33,7 @@
#include "stack_alloc.h"
/* Silk VAD noise level estimation */
-static inline void silk_VAD_GetNoiseLevels(
+static OPUS_INLINE void silk_VAD_GetNoiseLevels(
const opus_int32 pX[ VAD_N_BANDS ], /* I subband energies */
silk_VAD_state *psSilk_VAD /* I/O Pointer to Silk VAD state */
);
@@ -296,7 +296,7 @@
/**************************/
/* Noise level estimation */
/**************************/
-static inline void silk_VAD_GetNoiseLevels(
+static OPUS_INLINE void silk_VAD_GetNoiseLevels(
const opus_int32 pX[ VAD_N_BANDS ], /* I subband energies */
silk_VAD_state *psSilk_VAD /* I/O Pointer to Silk VAD state */
)
diff --git a/silk/VQ_WMat_EC.c b/silk/VQ_WMat_EC.c
index c5c6f71..13d5d34 100644
--- a/silk/VQ_WMat_EC.c
+++ b/silk/VQ_WMat_EC.c
@@ -35,15 +35,18 @@
void silk_VQ_WMat_EC(
opus_int8 *ind, /* O index of best codebook vector */
opus_int32 *rate_dist_Q14, /* O best weighted quant error + mu * rate */
+ opus_int *gain_Q7, /* O sum of absolute LTP coefficients */
const opus_int16 *in_Q14, /* I input vector to be quantized */
const opus_int32 *W_Q18, /* I weighting matrix */
const opus_int8 *cb_Q7, /* I codebook */
+ const opus_uint8 *cb_gain_Q7, /* I codebook effective gain */
const opus_uint8 *cl_Q5, /* I code length for each codebook vector */
const opus_int mu_Q9, /* I tradeoff betw. weighted error and rate */
+ const opus_int32 max_gain_Q7, /* I maximum sum of absolute LTP coefficients */
opus_int L /* I number of vectors in codebook */
)
{
- opus_int k;
+ opus_int k, gain_tmp_Q7;
const opus_int8 *cb_row_Q7;
opus_int16 diff_Q14[ 5 ];
opus_int32 sum1_Q14, sum2_Q16;
@@ -52,6 +55,8 @@
*rate_dist_Q14 = silk_int32_MAX;
cb_row_Q7 = cb_Q7;
for( k = 0; k < L; k++ ) {
+ gain_tmp_Q7 = cb_gain_Q7[k];
+
diff_Q14[ 0 ] = in_Q14[ 0 ] - silk_LSHIFT( cb_row_Q7[ 0 ], 7 );
diff_Q14[ 1 ] = in_Q14[ 1 ] - silk_LSHIFT( cb_row_Q7[ 1 ], 7 );
diff_Q14[ 2 ] = in_Q14[ 2 ] - silk_LSHIFT( cb_row_Q7[ 2 ], 7 );
@@ -61,6 +66,9 @@
/* Weighted rate */
sum1_Q14 = silk_SMULBB( mu_Q9, cl_Q5[ k ] );
+ /* Penalty for too large gain */
+ sum1_Q14 = silk_ADD_LSHIFT32( sum1_Q14, silk_max( silk_SUB32( gain_tmp_Q7, max_gain_Q7 ), 0 ), 10 );
+
silk_assert( sum1_Q14 >= 0 );
/* first row of W_Q18 */
@@ -103,6 +111,7 @@
if( sum1_Q14 < *rate_dist_Q14 ) {
*rate_dist_Q14 = sum1_Q14;
*ind = (opus_int8)k;
+ *gain_Q7 = gain_tmp_Q7;
}
/* Go to next cbk vector */
diff --git a/silk/arm/SigProc_FIX_armv4.h b/silk/arm/SigProc_FIX_armv4.h
index d69573e..ff62b1e 100644
--- a/silk/arm/SigProc_FIX_armv4.h
+++ b/silk/arm/SigProc_FIX_armv4.h
@@ -30,7 +30,7 @@
#define SILK_SIGPROC_FIX_ARMv4_H
#undef silk_MLA
-static inline opus_int32 silk_MLA_armv4(opus_int32 a, opus_int32 b,
+static OPUS_INLINE opus_int32 silk_MLA_armv4(opus_int32 a, opus_int32 b,
opus_int32 c)
{
opus_int32 res;
diff --git a/silk/arm/SigProc_FIX_armv5e.h b/silk/arm/SigProc_FIX_armv5e.h
index 81a6324..617a09c 100644
--- a/silk/arm/SigProc_FIX_armv5e.h
+++ b/silk/arm/SigProc_FIX_armv5e.h
@@ -30,7 +30,7 @@
#define SILK_SIGPROC_FIX_ARMv5E_H
#undef silk_SMULTT
-static inline opus_int32 silk_SMULTT_armv5e(opus_int32 a, opus_int32 b)
+static OPUS_INLINE opus_int32 silk_SMULTT_armv5e(opus_int32 a, opus_int32 b)
{
opus_int32 res;
__asm__(
@@ -44,7 +44,7 @@
#define silk_SMULTT(a, b) (silk_SMULTT_armv5e(a, b))
#undef silk_SMLATT
-static inline opus_int32 silk_SMLATT_armv5e(opus_int32 a, opus_int32 b,
+static OPUS_INLINE opus_int32 silk_SMLATT_armv5e(opus_int32 a, opus_int32 b,
opus_int32 c)
{
opus_int32 res;
diff --git a/silk/arm/macros_armv4.h b/silk/arm/macros_armv4.h
index 58df6c2..3f30e97 100644
--- a/silk/arm/macros_armv4.h
+++ b/silk/arm/macros_armv4.h
@@ -30,7 +30,7 @@
/* (a32 * (opus_int32)((opus_int16)(b32))) >> 16 output have to be 32bit int */
#undef silk_SMULWB
-static inline opus_int32 silk_SMULWB_armv4(opus_int32 a, opus_int16 b)
+static OPUS_INLINE opus_int32 silk_SMULWB_armv4(opus_int32 a, opus_int16 b)
{
unsigned rd_lo;
int rd_hi;
@@ -50,7 +50,7 @@
/* (a32 * (b32 >> 16)) >> 16 */
#undef silk_SMULWT
-static inline opus_int32 silk_SMULWT_armv4(opus_int32 a, opus_int32 b)
+static OPUS_INLINE opus_int32 silk_SMULWT_armv4(opus_int32 a, opus_int32 b)
{
unsigned rd_lo;
int rd_hi;
@@ -70,7 +70,7 @@
/* (a32 * b32) >> 16 */
#undef silk_SMULWW
-static inline opus_int32 silk_SMULWW_armv4(opus_int32 a, opus_int32 b)
+static OPUS_INLINE opus_int32 silk_SMULWW_armv4(opus_int32 a, opus_int32 b)
{
unsigned rd_lo;
int rd_hi;
@@ -85,7 +85,7 @@
#define silk_SMULWW(a, b) (silk_SMULWW_armv4(a, b))
#undef silk_SMLAWW
-static inline opus_int32 silk_SMLAWW_armv4(opus_int32 a, opus_int32 b,
+static OPUS_INLINE opus_int32 silk_SMLAWW_armv4(opus_int32 a, opus_int32 b,
opus_int32 c)
{
unsigned rd_lo;
diff --git a/silk/arm/macros_armv5e.h b/silk/arm/macros_armv5e.h
index 63b1e30..aad4117 100644
--- a/silk/arm/macros_armv5e.h
+++ b/silk/arm/macros_armv5e.h
@@ -31,7 +31,7 @@
/* (a32 * (opus_int32)((opus_int16)(b32))) >> 16 output have to be 32bit int */
#undef silk_SMULWB
-static inline opus_int32 silk_SMULWB_armv5e(opus_int32 a, opus_int16 b)
+static OPUS_INLINE opus_int32 silk_SMULWB_armv5e(opus_int32 a, opus_int16 b)
{
int res;
__asm__(
@@ -46,7 +46,7 @@
/* a32 + (b32 * (opus_int32)((opus_int16)(c32))) >> 16 output have to be 32bit int */
#undef silk_SMLAWB
-static inline opus_int32 silk_SMLAWB_armv5e(opus_int32 a, opus_int32 b,
+static OPUS_INLINE opus_int32 silk_SMLAWB_armv5e(opus_int32 a, opus_int32 b,
opus_int16 c)
{
int res;
@@ -62,7 +62,7 @@
/* (a32 * (b32 >> 16)) >> 16 */
#undef silk_SMULWT
-static inline opus_int32 silk_SMULWT_armv5e(opus_int32 a, opus_int32 b)
+static OPUS_INLINE opus_int32 silk_SMULWT_armv5e(opus_int32 a, opus_int32 b)
{
int res;
__asm__(
@@ -77,7 +77,7 @@
/* a32 + (b32 * (c32 >> 16)) >> 16 */
#undef silk_SMLAWT
-static inline opus_int32 silk_SMLAWT_armv5e(opus_int32 a, opus_int32 b,
+static OPUS_INLINE opus_int32 silk_SMLAWT_armv5e(opus_int32 a, opus_int32 b,
opus_int32 c)
{
int res;
@@ -93,7 +93,7 @@
/* (opus_int32)((opus_int16)(a3))) * (opus_int32)((opus_int16)(b32)) output have to be 32bit int */
#undef silk_SMULBB
-static inline opus_int32 silk_SMULBB_armv5e(opus_int32 a, opus_int32 b)
+static OPUS_INLINE opus_int32 silk_SMULBB_armv5e(opus_int32 a, opus_int32 b)
{
int res;
__asm__(
@@ -108,7 +108,7 @@
/* a32 + (opus_int32)((opus_int16)(b32)) * (opus_int32)((opus_int16)(c32)) output have to be 32bit int */
#undef silk_SMLABB
-static inline opus_int32 silk_SMLABB_armv5e(opus_int32 a, opus_int32 b,
+static OPUS_INLINE opus_int32 silk_SMLABB_armv5e(opus_int32 a, opus_int32 b,
opus_int32 c)
{
int res;
@@ -124,7 +124,7 @@
/* (opus_int32)((opus_int16)(a32)) * (b32 >> 16) */
#undef silk_SMULBT
-static inline opus_int32 silk_SMULBT_armv5e(opus_int32 a, opus_int32 b)
+static OPUS_INLINE opus_int32 silk_SMULBT_armv5e(opus_int32 a, opus_int32 b)
{
int res;
__asm__(
@@ -139,7 +139,7 @@
/* a32 + (opus_int32)((opus_int16)(b32)) * (c32 >> 16) */
#undef silk_SMLABT
-static inline opus_int32 silk_SMLABT_armv5e(opus_int32 a, opus_int32 b,
+static OPUS_INLINE opus_int32 silk_SMLABT_armv5e(opus_int32 a, opus_int32 b,
opus_int32 c)
{
int res;
@@ -155,7 +155,7 @@
/* add/subtract with output saturated */
#undef silk_ADD_SAT32
-static inline opus_int32 silk_ADD_SAT32_armv5e(opus_int32 a, opus_int32 b)
+static OPUS_INLINE opus_int32 silk_ADD_SAT32_armv5e(opus_int32 a, opus_int32 b)
{
int res;
__asm__(
@@ -169,7 +169,7 @@
#define silk_ADD_SAT32(a, b) (silk_ADD_SAT32_armv5e(a, b))
#undef silk_SUB_SAT32
-static inline opus_int32 silk_SUB_SAT32_armv5e(opus_int32 a, opus_int32 b)
+static OPUS_INLINE opus_int32 silk_SUB_SAT32_armv5e(opus_int32 a, opus_int32 b)
{
int res;
__asm__(
@@ -183,7 +183,7 @@
#define silk_SUB_SAT32(a, b) (silk_SUB_SAT32_armv5e(a, b))
#undef silk_CLZ16
-static inline opus_int32 silk_CLZ16_armv5(opus_int16 in16)
+static OPUS_INLINE opus_int32 silk_CLZ16_armv5(opus_int16 in16)
{
int res;
__asm__(
@@ -197,7 +197,7 @@
#define silk_CLZ16(in16) (silk_CLZ16_armv5(in16))
#undef silk_CLZ32
-static inline opus_int32 silk_CLZ32_armv5(opus_int32 in32)
+static OPUS_INLINE opus_int32 silk_CLZ32_armv5(opus_int32 in32)
{
int res;
__asm__(
diff --git a/silk/control.h b/silk/control.h
index 896cbe8..747e542 100644
--- a/silk/control.h
+++ b/silk/control.h
@@ -92,6 +92,9 @@
/* I: Opus encoder is allowing us to switch bandwidth */
opus_int opusCanSwitch;
+ /* I: Make frames as independent as possible (but still use LPC) */
+ opus_int reducedDependency;
+
/* O: Internal sampling rate used, in Hertz; 8000/12000/16000 */
opus_int32 internalSampleRate;
diff --git a/silk/control_codec.c b/silk/control_codec.c
index 56ce14c..1f674bd 100644
--- a/silk/control_codec.c
+++ b/silk/control_codec.c
@@ -55,7 +55,7 @@
opus_int Complexity /* I */
);
-static inline opus_int silk_setup_LBRR(
+static OPUS_INLINE opus_int silk_setup_LBRR(
silk_encoder_state *psEncC, /* I/O */
const opus_int32 TargetRate_bps /* I */
);
@@ -392,7 +392,7 @@
return ret;
}
-static inline opus_int silk_setup_LBRR(
+static OPUS_INLINE opus_int silk_setup_LBRR(
silk_encoder_state *psEncC, /* I/O */
const opus_int32 TargetRate_bps /* I */
)
diff --git a/silk/dec_API.c b/silk/dec_API.c
index bb0bc07..4cbcf71 100644
--- a/silk/dec_API.c
+++ b/silk/dec_API.c
@@ -305,7 +305,7 @@
/* Set up pointers to temp buffers */
ALLOC( samplesOut2_tmp,
- decControl->nChannelsAPI == 2 ? *nSamplesOut : 0, opus_int16 );
+ decControl->nChannelsAPI == 2 ? *nSamplesOut : ALLOC_NONE, opus_int16 );
if( decControl->nChannelsAPI == 2 ) {
resample_out_ptr = samplesOut2_tmp;
} else {
diff --git a/silk/enc_API.c b/silk/enc_API.c
index 44b9ab3..43739ef 100644
--- a/silk/enc_API.c
+++ b/silk/enc_API.c
@@ -69,6 +69,7 @@
/*************************/
opus_int silk_InitEncoder( /* O Returns error code */
void *encState, /* I/O State */
+ int arch, /* I Run-time architecture */
silk_EncControlStruct *encStatus /* O Encoder Status */
)
{
@@ -80,7 +81,7 @@
/* Reset encoder */
silk_memset( psEnc, 0, sizeof( silk_encoder ) );
for( n = 0; n < ENCODER_NUM_CHANNELS; n++ ) {
- if( ret += silk_init_encoder( &psEnc->state_Fxx[ n ] ) ) {
+ if( ret += silk_init_encoder( &psEnc->state_Fxx[ n ], arch ) ) {
silk_assert( 0 );
}
}
@@ -156,6 +157,11 @@
opus_int transition, curr_block, tot_blocks;
SAVE_STACK;
+ if (encControl->reducedDependency)
+ {
+ psEnc->state_Fxx[0].sCmn.first_frame_after_reset = 1;
+ psEnc->state_Fxx[1].sCmn.first_frame_after_reset = 1;
+ }
psEnc->state_Fxx[ 0 ].sCmn.nFramesEncoded = psEnc->state_Fxx[ 1 ].sCmn.nFramesEncoded = 0;
/* Check values in encoder control structure */
@@ -169,7 +175,7 @@
if( encControl->nChannelsInternal > psEnc->nChannelsInternal ) {
/* Mono -> Stereo transition: init state of second channel and stereo state */
- ret += silk_init_encoder( &psEnc->state_Fxx[ 1 ] );
+ ret += silk_init_encoder( &psEnc->state_Fxx[ 1 ], psEnc->state_Fxx[ 0 ].sCmn.arch );
silk_memset( psEnc->sStereo.pred_prev_Q13, 0, sizeof( psEnc->sStereo.pred_prev_Q13 ) );
silk_memset( psEnc->sStereo.sSide, 0, sizeof( psEnc->sStereo.sSide ) );
psEnc->sStereo.mid_side_amp_Q0[ 0 ] = 0;
@@ -201,9 +207,8 @@
}
/* Reset Encoder */
for( n = 0; n < encControl->nChannelsInternal; n++ ) {
- if( (ret = silk_init_encoder( &psEnc->state_Fxx[ n ] ) ) != 0 ) {
- silk_assert( 0 );
- }
+ ret = silk_init_encoder( &psEnc->state_Fxx[ n ], psEnc->state_Fxx[ n ].sCmn.arch );
+ silk_assert( !ret );
}
tmp_payloadSize_ms = encControl->payloadSize_ms;
encControl->payloadSize_ms = 10;
diff --git a/silk/encode_pulses.c b/silk/encode_pulses.c
index d1b2f5d..a450143 100644
--- a/silk/encode_pulses.c
+++ b/silk/encode_pulses.c
@@ -36,7 +36,7 @@
/* Encode quantization indices of excitation */
/*********************************************/
-static inline opus_int combine_and_check( /* return ok */
+static OPUS_INLINE opus_int combine_and_check( /* return ok */
opus_int *pulses_comb, /* O */
const opus_int *pulses_in, /* I */
opus_int max_pulses, /* I max value for sum of pulses */
diff --git a/silk/fixed/autocorr_FIX.c b/silk/fixed/autocorr_FIX.c
index dec3cc0..de95c98 100644
--- a/silk/fixed/autocorr_FIX.c
+++ b/silk/fixed/autocorr_FIX.c
@@ -38,10 +38,11 @@
opus_int *scale, /* O Scaling of the correlation vector */
const opus_int16 *inputData, /* I Input data to correlate */
const opus_int inputDataSize, /* I Length of input */
- const opus_int correlationCount /* I Number of correlation taps to compute */
+ const opus_int correlationCount, /* I Number of correlation taps to compute */
+ int arch /* I Run-time architecture */
)
{
opus_int corrCount;
corrCount = silk_min_int( inputDataSize, correlationCount );
- *scale = _celt_autocorr(inputData, results, NULL, 0, corrCount-1, inputDataSize);
+ *scale = _celt_autocorr(inputData, results, NULL, 0, corrCount-1, inputDataSize, arch);
}
diff --git a/silk/fixed/burg_modified_FIX.c b/silk/fixed/burg_modified_FIX.c
index f5112b6..db34829 100644
--- a/silk/fixed/burg_modified_FIX.c
+++ b/silk/fixed/burg_modified_FIX.c
@@ -50,7 +50,8 @@
const opus_int32 minInvGain_Q30, /* I Inverse of max prediction gain */
const opus_int subfr_length, /* I Input signal subframe length (incl. D preceding samples) */
const opus_int nb_subfr, /* I Number of subframes stacked in x */
- const opus_int D /* I Order */
+ const opus_int D, /* I Order */
+ int arch /* I Run-time architecture */
)
{
opus_int k, n, s, lz, rshifts, rshifts_extra, reached_max_gain;
@@ -98,7 +99,7 @@
int i;
opus_int32 d;
x_ptr = x + s * subfr_length;
- celt_pitch_xcorr(x_ptr, x_ptr + 1, xcorr, subfr_length - D, D );
+ celt_pitch_xcorr(x_ptr, x_ptr + 1, xcorr, subfr_length - D, D, arch );
for( n = 1; n < D + 1; n++ ) {
for ( i = n + subfr_length - D, d = 0; i < subfr_length; i++ )
d = MAC16_16( d, x_ptr[ i ], x_ptr[ i - n ] );
diff --git a/silk/fixed/encode_frame_FIX.c b/silk/fixed/encode_frame_FIX.c
index cacfd67..b490986 100644
--- a/silk/fixed/encode_frame_FIX.c
+++ b/silk/fixed/encode_frame_FIX.c
@@ -34,7 +34,7 @@
#include "tuning_parameters.h"
/* Low Bitrate Redundancy (LBRR) encoding. Reuse all parameters but encode with lower bitrate */
-static inline void silk_LBRR_encode_FIX(
+static OPUS_INLINE void silk_LBRR_encode_FIX(
silk_encoder_state_FIX *psEnc, /* I/O Pointer to Silk FIX encoder state */
silk_encoder_control_FIX *psEncCtrl, /* I/O Pointer to Silk FIX encoder control struct */
const opus_int32 xfw_Q3[], /* I Input signal */
@@ -132,12 +132,12 @@
/*****************************************/
/* Find pitch lags, initial LPC analysis */
/*****************************************/
- silk_find_pitch_lags_FIX( psEnc, &sEncCtrl, res_pitch, x_frame );
+ silk_find_pitch_lags_FIX( psEnc, &sEncCtrl, res_pitch, x_frame, psEnc->sCmn.arch );
/************************/
/* Noise shape analysis */
/************************/
- silk_noise_shape_analysis_FIX( psEnc, &sEncCtrl, res_pitch_frame, x_frame );
+ silk_noise_shape_analysis_FIX( psEnc, &sEncCtrl, res_pitch_frame, x_frame, psEnc->sCmn.arch );
/***************************************************/
/* Find linear prediction coefficients (LPC + LTP) */
@@ -302,10 +302,6 @@
silk_memmove( psEnc->x_buf, &psEnc->x_buf[ psEnc->sCmn.frame_length ],
( psEnc->sCmn.ltp_mem_length + LA_SHAPE_MS * psEnc->sCmn.fs_kHz ) * sizeof( opus_int16 ) );
- /* Parameters needed for next frame */
- psEnc->sCmn.prevLag = sEncCtrl.pitchL[ psEnc->sCmn.nb_subfr - 1 ];
- psEnc->sCmn.prevSignalType = psEnc->sCmn.indices.signalType;
-
/* Exit without entropy coding */
if( psEnc->sCmn.prefillFlag ) {
/* No payload */
@@ -314,6 +310,10 @@
return ret;
}
+ /* Parameters needed for next frame */
+ psEnc->sCmn.prevLag = sEncCtrl.pitchL[ psEnc->sCmn.nb_subfr - 1 ];
+ psEnc->sCmn.prevSignalType = psEnc->sCmn.indices.signalType;
+
/****************************************/
/* Finalize payload */
/****************************************/
@@ -326,7 +326,7 @@
}
/* Low-Bitrate Redundancy (LBRR) encoding. Reuse all parameters but encode excitation at lower bitrate */
-static inline void silk_LBRR_encode_FIX(
+static OPUS_INLINE void silk_LBRR_encode_FIX(
silk_encoder_state_FIX *psEnc, /* I/O Pointer to Silk FIX encoder state */
silk_encoder_control_FIX *psEncCtrl, /* I/O Pointer to Silk FIX encoder control struct */
const opus_int32 xfw_Q3[], /* I Input signal */
diff --git a/silk/fixed/find_LPC_FIX.c b/silk/fixed/find_LPC_FIX.c
index 70cefb6..783d32e 100644
--- a/silk/fixed/find_LPC_FIX.c
+++ b/silk/fixed/find_LPC_FIX.c
@@ -60,13 +60,13 @@
psEncC->indices.NLSFInterpCoef_Q2 = 4;
/* Burg AR analysis for the full frame */
- silk_burg_modified( &res_nrg, &res_nrg_Q, a_Q16, x, minInvGain_Q30, subfr_length, psEncC->nb_subfr, psEncC->predictLPCOrder );
+ silk_burg_modified( &res_nrg, &res_nrg_Q, a_Q16, x, minInvGain_Q30, subfr_length, psEncC->nb_subfr, psEncC->predictLPCOrder, psEncC->arch );
if( psEncC->useInterpolatedNLSFs && !psEncC->first_frame_after_reset && psEncC->nb_subfr == MAX_NB_SUBFR ) {
VARDECL( opus_int16, LPC_res );
/* Optimal solution for last 10 ms */
- silk_burg_modified( &res_tmp_nrg, &res_tmp_nrg_Q, a_tmp_Q16, x + 2 * subfr_length, minInvGain_Q30, subfr_length, 2, psEncC->predictLPCOrder );
+ silk_burg_modified( &res_tmp_nrg, &res_tmp_nrg_Q, a_tmp_Q16, x + 2 * subfr_length, minInvGain_Q30, subfr_length, 2, psEncC->predictLPCOrder, psEncC->arch );
/* subtract residual energy here, as that's easier than adding it to the */
/* residual energy of the first 10 ms in each iteration of the search below */
diff --git a/silk/fixed/find_pitch_lags_FIX.c b/silk/fixed/find_pitch_lags_FIX.c
index f60b436..620f8dc 100644
--- a/silk/fixed/find_pitch_lags_FIX.c
+++ b/silk/fixed/find_pitch_lags_FIX.c
@@ -38,7 +38,8 @@
silk_encoder_state_FIX *psEnc, /* I/O encoder state */
silk_encoder_control_FIX *psEncCtrl, /* I/O encoder control */
opus_int16 res[], /* O residual */
- const opus_int16 x[] /* I Speech signal */
+ const opus_int16 x[], /* I Speech signal */
+ int arch /* I Run-time architecture */
)
{
opus_int buf_len, i, scale;
@@ -86,7 +87,7 @@
silk_apply_sine_window( Wsig_ptr, x_buf_ptr, 2, psEnc->sCmn.la_pitch );
/* Calculate autocorrelation sequence */
- silk_autocorr( auto_corr, &scale, Wsig, psEnc->sCmn.pitch_LPC_win_length, psEnc->sCmn.pitchEstimationLPCOrder + 1 );
+ silk_autocorr( auto_corr, &scale, Wsig, psEnc->sCmn.pitch_LPC_win_length, psEnc->sCmn.pitchEstimationLPCOrder + 1, arch );
/* Add white noise, as fraction of energy */
auto_corr[ 0 ] = silk_SMLAWB( auto_corr[ 0 ], auto_corr[ 0 ], SILK_FIX_CONST( FIND_PITCH_WHITE_NOISE_FRACTION, 16 ) ) + 1;
@@ -127,7 +128,8 @@
/*****************************************/
if( silk_pitch_analysis_core( res, psEncCtrl->pitchL, &psEnc->sCmn.indices.lagIndex, &psEnc->sCmn.indices.contourIndex,
&psEnc->LTPCorr_Q15, psEnc->sCmn.prevLag, psEnc->sCmn.pitchEstimationThreshold_Q16,
- (opus_int)thrhld_Q13, psEnc->sCmn.fs_kHz, psEnc->sCmn.pitchEstimationComplexity, psEnc->sCmn.nb_subfr ) == 0 )
+ (opus_int)thrhld_Q13, psEnc->sCmn.fs_kHz, psEnc->sCmn.pitchEstimationComplexity, psEnc->sCmn.nb_subfr,
+ psEnc->sCmn.arch) == 0 )
{
psEnc->sCmn.indices.signalType = TYPE_VOICED;
} else {
diff --git a/silk/fixed/find_pred_coefs_FIX.c b/silk/fixed/find_pred_coefs_FIX.c
index 70d0279..5c22f82 100644
--- a/silk/fixed/find_pred_coefs_FIX.c
+++ b/silk/fixed/find_pred_coefs_FIX.c
@@ -93,7 +93,7 @@
/* Quantize LTP gain parameters */
silk_quant_LTP_gains( psEncCtrl->LTPCoef_Q14, psEnc->sCmn.indices.LTPIndex, &psEnc->sCmn.indices.PERIndex,
- WLTP, psEnc->sCmn.mu_LTP_Q9, psEnc->sCmn.LTPQuantLowComplexity, psEnc->sCmn.nb_subfr);
+ &psEnc->sCmn.sum_log_gain_Q7, WLTP, psEnc->sCmn.mu_LTP_Q9, psEnc->sCmn.LTPQuantLowComplexity, psEnc->sCmn.nb_subfr);
/* Control LTP scaling */
silk_LTP_scale_ctrl_FIX( psEnc, psEncCtrl, condCoding );
@@ -118,6 +118,7 @@
silk_memset( psEncCtrl->LTPCoef_Q14, 0, psEnc->sCmn.nb_subfr * LTP_ORDER * sizeof( opus_int16 ) );
psEncCtrl->LTPredCodGain_Q7 = 0;
+ psEnc->sCmn.sum_log_gain_Q7 = 0;
}
/* Limit on total predictive coding gain */
diff --git a/silk/fixed/main_FIX.h b/silk/fixed/main_FIX.h
index d999b13..a56ca07 100644
--- a/silk/fixed/main_FIX.h
+++ b/silk/fixed/main_FIX.h
@@ -73,7 +73,8 @@
/* Initializes the Silk encoder state */
opus_int silk_init_encoder(
- silk_encoder_state_Fxx *psEnc /* I/O Pointer to Silk FIX encoder state */
+ silk_encoder_state_Fxx *psEnc, /* I/O Pointer to Silk FIX encoder state */
+ int arch /* I Run-time architecture */
);
/* Control the Silk encoder */
@@ -104,7 +105,8 @@
silk_encoder_state_FIX *psEnc, /* I/O Encoder state FIX */
silk_encoder_control_FIX *psEncCtrl, /* I/O Encoder control FIX */
const opus_int16 *pitch_res, /* I LPC residual from pitch analysis */
- const opus_int16 *x /* I Input signal [ frame_length + la_shape ] */
+ const opus_int16 *x, /* I Input signal [ frame_length + la_shape ] */
+ int arch /* I Run-time architecture */
);
/* Autocorrelations for a warped frequency axis */
@@ -132,7 +134,8 @@
silk_encoder_state_FIX *psEnc, /* I/O encoder state */
silk_encoder_control_FIX *psEncCtrl, /* I/O encoder control */
opus_int16 res[], /* O residual */
- const opus_int16 x[] /* I Speech signal */
+ const opus_int16 x[], /* I Speech signal */
+ int arch /* I Run-time architecture */
);
/* Find LPC and LTP coefficients */
diff --git a/silk/fixed/noise_shape_analysis_FIX.c b/silk/fixed/noise_shape_analysis_FIX.c
index b97881b..e24d2e9 100644
--- a/silk/fixed/noise_shape_analysis_FIX.c
+++ b/silk/fixed/noise_shape_analysis_FIX.c
@@ -37,7 +37,7 @@
/* non-warped frequency scale. (So that it can be implemented with a minimum-phase monic filter.) */
/* Note: A monic filter is one with the first coefficient equal to 1.0. In Silk we omit the first */
/* coefficient in an array of coefficients, for monic filters. */
-static inline opus_int32 warped_gain( /* gain in Q16*/
+static OPUS_INLINE opus_int32 warped_gain( /* gain in Q16*/
const opus_int32 *coefs_Q24,
opus_int lambda_Q16,
opus_int order
@@ -56,7 +56,7 @@
/* Convert warped filter coefficients to monic pseudo-warped coefficients and limit maximum */
/* amplitude of monic warped coefficients by using bandwidth expansion on the true coefficients */
-static inline void limit_warped_coefs(
+static OPUS_INLINE void limit_warped_coefs(
opus_int32 *coefs_syn_Q24,
opus_int32 *coefs_ana_Q24,
opus_int lambda_Q16,
@@ -145,7 +145,8 @@
silk_encoder_state_FIX *psEnc, /* I/O Encoder state FIX */
silk_encoder_control_FIX *psEncCtrl, /* I/O Encoder control FIX */
const opus_int16 *pitch_res, /* I LPC residual from pitch analysis */
- const opus_int16 *x /* I Input signal [ frame_length + la_shape ] */
+ const opus_int16 *x, /* I Input signal [ frame_length + la_shape ] */
+ int arch /* I Run-time architecture */
)
{
silk_shape_state_FIX *psShapeSt = &psEnc->sShape;
@@ -281,7 +282,7 @@
silk_warped_autocorrelation_FIX( auto_corr, &scale, x_windowed, warping_Q16, psEnc->sCmn.shapeWinLength, psEnc->sCmn.shapingLPCOrder );
} else {
/* Calculate regular auto correlation */
- silk_autocorr( auto_corr, &scale, x_windowed, psEnc->sCmn.shapeWinLength, psEnc->sCmn.shapingLPCOrder + 1 );
+ silk_autocorr( auto_corr, &scale, x_windowed, psEnc->sCmn.shapeWinLength, psEnc->sCmn.shapingLPCOrder + 1, arch );
}
/* Add white noise, as a fraction of energy */
diff --git a/silk/fixed/pitch_analysis_core_FIX.c b/silk/fixed/pitch_analysis_core_FIX.c
index b6bc0bb..1641a0f 100644
--- a/silk/fixed/pitch_analysis_core_FIX.c
+++ b/silk/fixed/pitch_analysis_core_FIX.c
@@ -62,7 +62,8 @@
opus_int start_lag, /* I lag offset to search around */
opus_int sf_length, /* I length of a 5 ms subframe */
opus_int nb_subfr, /* I number of subframes */
- opus_int complexity /* I Complexity setting */
+ opus_int complexity, /* I Complexity setting */
+ int arch /* I Run-time architecture */
);
static void silk_P_Ana_calc_energy_st3(
@@ -88,7 +89,8 @@
const opus_int search_thres2_Q13, /* I Final threshold for lag candidates 0 - 1 */
const opus_int Fs_kHz, /* I Sample frequency (kHz) */
const opus_int complexity, /* I Complexity setting, 0-2, where 2 is highest */
- const opus_int nb_subfr /* I number of 5 ms subframes */
+ const opus_int nb_subfr, /* I number of 5 ms subframes */
+ int arch /* I Run-time architecture */
)
{
VARDECL( opus_int16, frame_8kHz );
@@ -189,7 +191,7 @@
silk_assert( basis_ptr >= frame_4kHz );
silk_assert( basis_ptr + SF_LENGTH_8KHZ <= frame_4kHz + frame_length_4kHz );
- celt_pitch_xcorr( target_ptr, target_ptr - MAX_LAG_4KHZ, xcorr32, SF_LENGTH_8KHZ, MAX_LAG_4KHZ - MIN_LAG_4KHZ + 1 );
+ celt_pitch_xcorr( target_ptr, target_ptr - MAX_LAG_4KHZ, xcorr32, SF_LENGTH_8KHZ, MAX_LAG_4KHZ - MIN_LAG_4KHZ + 1, arch );
/* Calculate first vector products before loop */
cross_corr = xcorr32[ MAX_LAG_4KHZ - MIN_LAG_4KHZ ];
@@ -465,7 +467,7 @@
/***************************************************************************/
/* find scaling as max scaling for each subframe */
silk_sum_sqr_shift( &energy, &shift, frame, frame_length );
- ALLOC( scratch_mem, shift > 0 ? frame_length : 0, opus_int16 );
+ ALLOC( scratch_mem, shift > 0 ? frame_length : ALLOC_NONE, opus_int16 );
if( shift > 0 ) {
/* Move signal to scratch mem because the input signal should be unchanged */
shift = silk_RSHIFT( shift, 1 );
@@ -516,7 +518,7 @@
/* Calculate the correlations and energies needed in stage 3 */
ALLOC( energies_st3, nb_subfr * nb_cbk_search, silk_pe_stage3_vals );
ALLOC( cross_corr_st3, nb_subfr * nb_cbk_search, silk_pe_stage3_vals );
- silk_P_Ana_calc_corr_st3( cross_corr_st3, input_frame_ptr, start_lag, sf_length, nb_subfr, complexity );
+ silk_P_Ana_calc_corr_st3( cross_corr_st3, input_frame_ptr, start_lag, sf_length, nb_subfr, complexity, arch );
silk_P_Ana_calc_energy_st3( energies_st3, input_frame_ptr, start_lag, sf_length, nb_subfr, complexity );
lag_counter = 0;
@@ -597,7 +599,8 @@
opus_int start_lag, /* I lag offset to search around */
opus_int sf_length, /* I length of a 5 ms subframe */
opus_int nb_subfr, /* I number of subframes */
- opus_int complexity /* I Complexity setting */
+ opus_int complexity, /* I Complexity setting */
+ int arch /* I Run-time architecture */
)
{
const opus_int16 *target_ptr;
@@ -634,7 +637,7 @@
lag_low = matrix_ptr( Lag_range_ptr, k, 0, 2 );
lag_high = matrix_ptr( Lag_range_ptr, k, 1, 2 );
silk_assert(lag_high-lag_low+1 <= SCRATCH_SIZE);
- celt_pitch_xcorr( target_ptr, target_ptr - start_lag - lag_high, xcorr32, sf_length, lag_high - lag_low + 1 );
+ celt_pitch_xcorr( target_ptr, target_ptr - start_lag - lag_high, xcorr32, sf_length, lag_high - lag_low + 1, arch );
for( j = lag_low; j <= lag_high; j++ ) {
silk_assert( lag_counter < SCRATCH_SIZE );
scratch_mem[ lag_counter ] = xcorr32[ lag_high - j ];
diff --git a/silk/fixed/prefilter_FIX.c b/silk/fixed/prefilter_FIX.c
index 1cfe4f9..d381730 100644
--- a/silk/fixed/prefilter_FIX.c
+++ b/silk/fixed/prefilter_FIX.c
@@ -34,7 +34,7 @@
#include "tuning_parameters.h"
/* Prefilter for finding Quantizer input signal */
-static inline void silk_prefilt_FIX(
+static OPUS_INLINE void silk_prefilt_FIX(
silk_prefilter_state_FIX *P, /* I/O state */
opus_int32 st_res_Q12[], /* I short term residual signal */
opus_int32 xw_Q3[], /* O prefiltered signal */
@@ -156,7 +156,7 @@
}
/* Prefilter for finding Quantizer input signal */
-static inline void silk_prefilt_FIX(
+static OPUS_INLINE void silk_prefilt_FIX(
silk_prefilter_state_FIX *P, /* I/O state */
opus_int32 st_res_Q12[], /* I short term residual signal */
opus_int32 xw_Q3[], /* O prefiltered signal */
diff --git a/silk/fixed/solve_LS_FIX.c b/silk/fixed/solve_LS_FIX.c
index 1a39018..51d7d49 100644
--- a/silk/fixed/solve_LS_FIX.c
+++ b/silk/fixed/solve_LS_FIX.c
@@ -43,7 +43,7 @@
} inv_D_t;
/* Factorize square matrix A into LDL form */
-static inline void silk_LDL_factorize_FIX(
+static OPUS_INLINE void silk_LDL_factorize_FIX(
opus_int32 *A, /* I/O Pointer to Symetric Square Matrix */
opus_int M, /* I Size of Matrix */
opus_int32 *L_Q16, /* I/O Pointer to Square Upper triangular Matrix */
@@ -51,7 +51,7 @@
);
/* Solve Lx = b, when L is lower triangular and has ones on the diagonal */
-static inline void silk_LS_SolveFirst_FIX(
+static OPUS_INLINE void silk_LS_SolveFirst_FIX(
const opus_int32 *L_Q16, /* I Pointer to Lower Triangular Matrix */
opus_int M, /* I Dim of Matrix equation */
const opus_int32 *b, /* I b Vector */
@@ -59,14 +59,14 @@
);
/* Solve L^t*x = b, where L is lower triangular with ones on the diagonal */
-static inline void silk_LS_SolveLast_FIX(
+static OPUS_INLINE void silk_LS_SolveLast_FIX(
const opus_int32 *L_Q16, /* I Pointer to Lower Triangular Matrix */
const opus_int M, /* I Dim of Matrix equation */
const opus_int32 *b, /* I b Vector */
opus_int32 *x_Q16 /* O x Vector */
);
-static inline void silk_LS_divide_Q16_FIX(
+static OPUS_INLINE void silk_LS_divide_Q16_FIX(
opus_int32 T[], /* I/O Numenator vector */
inv_D_t *inv_D, /* I 1 / D vector */
opus_int M /* I dimension */
@@ -113,7 +113,7 @@
RESTORE_STACK;
}
-static inline void silk_LDL_factorize_FIX(
+static OPUS_INLINE void silk_LDL_factorize_FIX(
opus_int32 *A, /* I/O Pointer to Symetric Square Matrix */
opus_int M, /* I Size of Matrix */
opus_int32 *L_Q16, /* I/O Pointer to Square Upper triangular Matrix */
@@ -185,7 +185,7 @@
silk_assert( status == 0 );
}
-static inline void silk_LS_divide_Q16_FIX(
+static OPUS_INLINE void silk_LS_divide_Q16_FIX(
opus_int32 T[], /* I/O Numenator vector */
inv_D_t *inv_D, /* I 1 / D vector */
opus_int M /* I dimension */
@@ -205,7 +205,7 @@
}
/* Solve Lx = b, when L is lower triangular and has ones on the diagonal */
-static inline void silk_LS_SolveFirst_FIX(
+static OPUS_INLINE void silk_LS_SolveFirst_FIX(
const opus_int32 *L_Q16, /* I Pointer to Lower Triangular Matrix */
opus_int M, /* I Dim of Matrix equation */
const opus_int32 *b, /* I b Vector */
@@ -227,7 +227,7 @@
}
/* Solve L^t*x = b, where L is lower triangular with ones on the diagonal */
-static inline void silk_LS_SolveLast_FIX(
+static OPUS_INLINE void silk_LS_SolveLast_FIX(
const opus_int32 *L_Q16, /* I Pointer to Lower Triangular Matrix */
const opus_int M, /* I Dim of Matrix equation */
const opus_int32 *b, /* I b Vector */
diff --git a/silk/float/LPC_analysis_filter_FLP.c b/silk/float/LPC_analysis_filter_FLP.c
index 3bb9244..cae89a0 100644
--- a/silk/float/LPC_analysis_filter_FLP.c
+++ b/silk/float/LPC_analysis_filter_FLP.c
@@ -40,7 +40,7 @@
/************************************************/
/* 16th order LPC analysis filter, does not write first 16 samples */
-static inline void silk_LPC_analysis_filter16_FLP(
+static OPUS_INLINE void silk_LPC_analysis_filter16_FLP(
silk_float r_LPC[], /* O LPC residual signal */
const silk_float PredCoef[], /* I LPC coefficients */
const silk_float s[], /* I Input signal */
@@ -78,7 +78,7 @@
}
/* 12th order LPC analysis filter, does not write first 12 samples */
-static inline void silk_LPC_analysis_filter12_FLP(
+static OPUS_INLINE void silk_LPC_analysis_filter12_FLP(
silk_float r_LPC[], /* O LPC residual signal */
const silk_float PredCoef[], /* I LPC coefficients */
const silk_float s[], /* I Input signal */
@@ -112,7 +112,7 @@
}
/* 10th order LPC analysis filter, does not write first 10 samples */
-static inline void silk_LPC_analysis_filter10_FLP(
+static OPUS_INLINE void silk_LPC_analysis_filter10_FLP(
silk_float r_LPC[], /* O LPC residual signal */
const silk_float PredCoef[], /* I LPC coefficients */
const silk_float s[], /* I Input signal */
@@ -144,7 +144,7 @@
}
/* 8th order LPC analysis filter, does not write first 8 samples */
-static inline void silk_LPC_analysis_filter8_FLP(
+static OPUS_INLINE void silk_LPC_analysis_filter8_FLP(
silk_float r_LPC[], /* O LPC residual signal */
const silk_float PredCoef[], /* I LPC coefficients */
const silk_float s[], /* I Input signal */
@@ -174,7 +174,7 @@
}
/* 6th order LPC analysis filter, does not write first 6 samples */
-static inline void silk_LPC_analysis_filter6_FLP(
+static OPUS_INLINE void silk_LPC_analysis_filter6_FLP(
silk_float r_LPC[], /* O LPC residual signal */
const silk_float PredCoef[], /* I LPC coefficients */
const silk_float s[], /* I Input signal */
diff --git a/silk/float/SigProc_FLP.h b/silk/float/SigProc_FLP.h
index 2f5bb4c..f0cb373 100644
--- a/silk/float/SigProc_FLP.h
+++ b/silk/float/SigProc_FLP.h
@@ -94,7 +94,8 @@
const silk_float search_thres2, /* I Final threshold for lag candidates 0 - 1 */
const opus_int Fs_kHz, /* I sample frequency (kHz) */
const opus_int complexity, /* I Complexity setting, 0-2, where 2 is highest */
- const opus_int nb_subfr /* I Number of 5 ms subframes */
+ const opus_int nb_subfr, /* I Number of 5 ms subframes */
+ int arch /* I Run-time architecture */
);
void silk_insertion_sort_decreasing_FLP(
@@ -153,19 +154,19 @@
#define silk_abs_float( a ) ((silk_float)fabs(a))
/* sigmoid function */
-static inline silk_float silk_sigmoid( silk_float x )
+static OPUS_INLINE silk_float silk_sigmoid( silk_float x )
{
return (silk_float)(1.0 / (1.0 + exp(-x)));
}
/* floating-point to integer conversion (rounding) */
-static inline opus_int32 silk_float2int( silk_float x )
+static OPUS_INLINE opus_int32 silk_float2int( silk_float x )
{
return (opus_int32)float2int( x );
}
/* floating-point to integer conversion (rounding) */
-static inline void silk_float2short_array(
+static OPUS_INLINE void silk_float2short_array(
opus_int16 *out,
const silk_float *in,
opus_int32 length
@@ -178,7 +179,7 @@
}
/* integer to floating-point conversion */
-static inline void silk_short2float_array(
+static OPUS_INLINE void silk_short2float_array(
silk_float *out,
const opus_int16 *in,
opus_int32 length
@@ -191,7 +192,7 @@
}
/* using log2() helps the fixed-point conversion */
-static inline silk_float silk_log2( double x )
+static OPUS_INLINE silk_float silk_log2( double x )
{
return ( silk_float )( 3.32192809488736 * log10( x ) );
}
diff --git a/silk/float/encode_frame_FLP.c b/silk/float/encode_frame_FLP.c
index 3221686..d54e268 100644
--- a/silk/float/encode_frame_FLP.c
+++ b/silk/float/encode_frame_FLP.c
@@ -33,7 +33,7 @@
#include "tuning_parameters.h"
/* Low Bitrate Redundancy (LBRR) encoding. Reuse all parameters but encode with lower bitrate */
-static inline void silk_LBRR_encode_FLP(
+static OPUS_INLINE void silk_LBRR_encode_FLP(
silk_encoder_state_FLP *psEnc, /* I/O Encoder state FLP */
silk_encoder_control_FLP *psEncCtrl, /* I/O Encoder control FLP */
const silk_float xfw[], /* I Input signal */
@@ -129,7 +129,7 @@
/*****************************************/
/* Find pitch lags, initial LPC analysis */
/*****************************************/
- silk_find_pitch_lags_FLP( psEnc, &sEncCtrl, res_pitch, x_frame );
+ silk_find_pitch_lags_FLP( psEnc, &sEncCtrl, res_pitch, x_frame, psEnc->sCmn.arch );
/************************/
/* Noise shape analysis */
@@ -294,10 +294,6 @@
silk_memmove( psEnc->x_buf, &psEnc->x_buf[ psEnc->sCmn.frame_length ],
( psEnc->sCmn.ltp_mem_length + LA_SHAPE_MS * psEnc->sCmn.fs_kHz ) * sizeof( silk_float ) );
- /* Parameters needed for next frame */
- psEnc->sCmn.prevLag = sEncCtrl.pitchL[ psEnc->sCmn.nb_subfr - 1 ];
- psEnc->sCmn.prevSignalType = psEnc->sCmn.indices.signalType;
-
/* Exit without entropy coding */
if( psEnc->sCmn.prefillFlag ) {
/* No payload */
@@ -305,6 +301,10 @@
return ret;
}
+ /* Parameters needed for next frame */
+ psEnc->sCmn.prevLag = sEncCtrl.pitchL[ psEnc->sCmn.nb_subfr - 1 ];
+ psEnc->sCmn.prevSignalType = psEnc->sCmn.indices.signalType;
+
/****************************************/
/* Finalize payload */
/****************************************/
@@ -316,7 +316,7 @@
}
/* Low-Bitrate Redundancy (LBRR) encoding. Reuse all parameters but encode excitation at lower bitrate */
-static inline void silk_LBRR_encode_FLP(
+static OPUS_INLINE void silk_LBRR_encode_FLP(
silk_encoder_state_FLP *psEnc, /* I/O Encoder state FLP */
silk_encoder_control_FLP *psEncCtrl, /* I/O Encoder control FLP */
const silk_float xfw[], /* I Input signal */
diff --git a/silk/float/find_pitch_lags_FLP.c b/silk/float/find_pitch_lags_FLP.c
index 455db82..f3b22d2 100644
--- a/silk/float/find_pitch_lags_FLP.c
+++ b/silk/float/find_pitch_lags_FLP.c
@@ -37,7 +37,8 @@
silk_encoder_state_FLP *psEnc, /* I/O Encoder state FLP */
silk_encoder_control_FLP *psEncCtrl, /* I/O Encoder control FLP */
silk_float res[], /* O Residual */
- const silk_float x[] /* I Speech signal */
+ const silk_float x[], /* I Speech signal */
+ int arch /* I Run-time architecture */
)
{
opus_int buf_len;
@@ -116,7 +117,7 @@
/*****************************************/
if( silk_pitch_analysis_core_FLP( res, psEncCtrl->pitchL, &psEnc->sCmn.indices.lagIndex,
&psEnc->sCmn.indices.contourIndex, &psEnc->LTPCorr, psEnc->sCmn.prevLag, psEnc->sCmn.pitchEstimationThreshold_Q16 / 65536.0f,
- thrhld, psEnc->sCmn.fs_kHz, psEnc->sCmn.pitchEstimationComplexity, psEnc->sCmn.nb_subfr ) == 0 )
+ thrhld, psEnc->sCmn.fs_kHz, psEnc->sCmn.pitchEstimationComplexity, psEnc->sCmn.nb_subfr, arch ) == 0 )
{
psEnc->sCmn.indices.signalType = TYPE_VOICED;
} else {
diff --git a/silk/float/find_pred_coefs_FLP.c b/silk/float/find_pred_coefs_FLP.c
index 0c6f0d6..ea2c6c4 100644
--- a/silk/float/find_pred_coefs_FLP.c
+++ b/silk/float/find_pred_coefs_FLP.c
@@ -67,7 +67,7 @@
/* Quantize LTP gain parameters */
silk_quant_LTP_gains_FLP( psEncCtrl->LTPCoef, psEnc->sCmn.indices.LTPIndex, &psEnc->sCmn.indices.PERIndex,
- WLTP, psEnc->sCmn.mu_LTP_Q9, psEnc->sCmn.LTPQuantLowComplexity, psEnc->sCmn.nb_subfr );
+ &psEnc->sCmn.sum_log_gain_Q7, WLTP, psEnc->sCmn.mu_LTP_Q9, psEnc->sCmn.LTPQuantLowComplexity, psEnc->sCmn.nb_subfr );
/* Control LTP scaling */
silk_LTP_scale_ctrl_FLP( psEnc, psEncCtrl, condCoding );
@@ -90,6 +90,7 @@
}
silk_memset( psEncCtrl->LTPCoef, 0, psEnc->sCmn.nb_subfr * LTP_ORDER * sizeof( silk_float ) );
psEncCtrl->LTPredCodGain = 0.0f;
+ psEnc->sCmn.sum_log_gain_Q7 = 0;
}
/* Limit on total predictive coding gain */
diff --git a/silk/float/main_FLP.h b/silk/float/main_FLP.h
index dbd34ae..fb553b6 100644
--- a/silk/float/main_FLP.h
+++ b/silk/float/main_FLP.h
@@ -71,7 +71,8 @@
/* Initializes the Silk encoder state */
opus_int silk_init_encoder(
- silk_encoder_state_FLP *psEnc /* I/O Encoder state FLP */
+ silk_encoder_state_FLP *psEnc, /* I/O Encoder state FLP */
+ int arch /* I Run-tim architecture */
);
/* Control the Silk encoder */
@@ -129,7 +130,8 @@
silk_encoder_state_FLP *psEnc, /* I/O Encoder state FLP */
silk_encoder_control_FLP *psEncCtrl, /* I/O Encoder control FLP */
silk_float res[], /* O Residual */
- const silk_float x[] /* I Speech signal */
+ const silk_float x[], /* I Speech signal */
+ int arch /* I Run-time architecture */
);
/* Find LPC and LTP coefficients */
@@ -199,6 +201,7 @@
silk_float B[ MAX_NB_SUBFR * LTP_ORDER ], /* I/O (Un-)quantized LTP gains */
opus_int8 cbk_index[ MAX_NB_SUBFR ], /* O Codebook index */
opus_int8 *periodicity_index, /* O Periodicity index */
+ opus_int32 *sum_log_gain_Q7, /* I/O Cumulative max prediction gain */
const silk_float W[ MAX_NB_SUBFR * LTP_ORDER * LTP_ORDER ], /* I Error weights */
const opus_int mu_Q10, /* I Mu value (R/D tradeoff) */
const opus_int lowComplexity, /* I Flag for low complexity */
diff --git a/silk/float/noise_shape_analysis_FLP.c b/silk/float/noise_shape_analysis_FLP.c
index e7c26fc..65f6ea5 100644
--- a/silk/float/noise_shape_analysis_FLP.c
+++ b/silk/float/noise_shape_analysis_FLP.c
@@ -36,7 +36,7 @@
/* non-warped frequency scale. (So that it can be implemented with a minimum-phase monic filter.) */
/* Note: A monic filter is one with the first coefficient equal to 1.0. In Silk we omit the first */
/* coefficient in an array of coefficients, for monic filters. */
-static inline silk_float warped_gain(
+static OPUS_INLINE silk_float warped_gain(
const silk_float *coefs,
silk_float lambda,
opus_int order
@@ -54,7 +54,7 @@
/* Convert warped filter coefficients to monic pseudo-warped coefficients and limit maximum */
/* amplitude of monic warped coefficients by using bandwidth expansion on the true coefficients */
-static inline void warped_true2monic_coefs(
+static OPUS_INLINE void warped_true2monic_coefs(
silk_float *coefs_syn,
silk_float *coefs_ana,
silk_float lambda,
diff --git a/silk/float/pitch_analysis_core_FLP.c b/silk/float/pitch_analysis_core_FLP.c
index 605ea25..e58f041 100644
--- a/silk/float/pitch_analysis_core_FLP.c
+++ b/silk/float/pitch_analysis_core_FLP.c
@@ -48,7 +48,8 @@
opus_int start_lag, /* I start lag */
opus_int sf_length, /* I sub frame length */
opus_int nb_subfr, /* I number of subframes */
- opus_int complexity /* I Complexity setting */
+ opus_int complexity, /* I Complexity setting */
+ int arch /* I Run-time architecture */
);
static void silk_P_Ana_calc_energy_st3(
@@ -74,7 +75,8 @@
const silk_float search_thres2, /* I Final threshold for lag candidates 0 - 1 */
const opus_int Fs_kHz, /* I sample frequency (kHz) */
const opus_int complexity, /* I Complexity setting, 0-2, where 2 is highest */
- const opus_int nb_subfr /* I Number of 5 ms subframes */
+ const opus_int nb_subfr, /* I Number of 5 ms subframes */
+ int arch /* I Run-time architecture */
)
{
opus_int i, k, d, j;
@@ -176,7 +178,7 @@
silk_assert( basis_ptr >= frame_4kHz );
silk_assert( basis_ptr + sf_length_8kHz <= frame_4kHz + frame_length_4kHz );
- celt_pitch_xcorr( target_ptr, target_ptr-max_lag_4kHz, xcorr, sf_length_8kHz, max_lag_4kHz - min_lag_4kHz + 1 );
+ celt_pitch_xcorr( target_ptr, target_ptr-max_lag_4kHz, xcorr, sf_length_8kHz, max_lag_4kHz - min_lag_4kHz + 1, arch );
/* Calculate first vector products before loop */
cross_corr = xcorr[ max_lag_4kHz - min_lag_4kHz ];
@@ -409,7 +411,7 @@
CCmax = -1000.0f;
/* Calculate the correlations and energies needed in stage 3 */
- silk_P_Ana_calc_corr_st3( cross_corr_st3, frame, start_lag, sf_length, nb_subfr, complexity );
+ silk_P_Ana_calc_corr_st3( cross_corr_st3, frame, start_lag, sf_length, nb_subfr, complexity, arch );
silk_P_Ana_calc_energy_st3( energies_st3, frame, start_lag, sf_length, nb_subfr, complexity );
lag_counter = 0;
@@ -493,10 +495,11 @@
opus_int start_lag, /* I start lag */
opus_int sf_length, /* I sub frame length */
opus_int nb_subfr, /* I number of subframes */
- opus_int complexity /* I Complexity setting */
+ opus_int complexity, /* I Complexity setting */
+ int arch /* I Run-time architecture */
)
{
- const silk_float *target_ptr, *basis_ptr;
+ const silk_float *target_ptr;
opus_int i, j, k, lag_counter, lag_low, lag_high;
opus_int nb_cbk_search, delta, idx, cbk_size;
silk_float scratch_mem[ SCRATCH_SIZE ];
@@ -527,9 +530,8 @@
lag_low = matrix_ptr( Lag_range_ptr, k, 0, 2 );
lag_high = matrix_ptr( Lag_range_ptr, k, 1, 2 );
silk_assert(lag_high-lag_low+1 <= SCRATCH_SIZE);
- celt_pitch_xcorr( target_ptr, target_ptr - start_lag - lag_high, xcorr, sf_length, lag_high - lag_low + 1 );
+ celt_pitch_xcorr( target_ptr, target_ptr - start_lag - lag_high, xcorr, sf_length, lag_high - lag_low + 1, arch );
for( j = lag_low; j <= lag_high; j++ ) {
- basis_ptr = target_ptr - ( start_lag + j );
silk_assert( lag_counter < SCRATCH_SIZE );
scratch_mem[ lag_counter ] = xcorr[ lag_high - j ];
lag_counter++;
diff --git a/silk/float/prefilter_FLP.c b/silk/float/prefilter_FLP.c
index a3f81c9..8bc32fb 100644
--- a/silk/float/prefilter_FLP.c
+++ b/silk/float/prefilter_FLP.c
@@ -35,7 +35,7 @@
/*
* Prefilter for finding Quantizer input signal
*/
-static inline void silk_prefilt_FLP(
+static OPUS_INLINE void silk_prefilt_FLP(
silk_prefilter_state_FLP *P, /* I/O state */
silk_float st_res[], /* I */
silk_float xw[], /* O */
@@ -153,7 +153,7 @@
/*
* Prefilter for finding Quantizer input signal
*/
-static inline void silk_prefilt_FLP(
+static OPUS_INLINE void silk_prefilt_FLP(
silk_prefilter_state_FLP *P, /* I/O state */
silk_float st_res[], /* I */
silk_float xw[], /* O */
diff --git a/silk/float/solve_LS_FLP.c b/silk/float/solve_LS_FLP.c
index 0eda65a..7c90d66 100644
--- a/silk/float/solve_LS_FLP.c
+++ b/silk/float/solve_LS_FLP.c
@@ -37,7 +37,7 @@
* Matrix D (only the diagonal elements returned in a vector)such that
* the symmetric matric A is given by A = L*D*L'.
**********************************************************************/
-static inline void silk_LDL_FLP(
+static OPUS_INLINE void silk_LDL_FLP(
silk_float *A, /* I/O Pointer to Symetric Square Matrix */
opus_int M, /* I Size of Matrix */
silk_float *L, /* I/O Pointer to Square Upper triangular Matrix */
@@ -48,7 +48,7 @@
* Function to solve linear equation Ax = b, when A is a MxM lower
* triangular matrix, with ones on the diagonal.
**********************************************************************/
-static inline void silk_SolveWithLowerTriangularWdiagOnes_FLP(
+static OPUS_INLINE void silk_SolveWithLowerTriangularWdiagOnes_FLP(
const silk_float *L, /* I Pointer to Lower Triangular Matrix */
opus_int M, /* I Dim of Matrix equation */
const silk_float *b, /* I b Vector */
@@ -59,7 +59,7 @@
* Function to solve linear equation (A^T)x = b, when A is a MxM lower
* triangular, with ones on the diagonal. (ie then A^T is upper triangular)
**********************************************************************/
-static inline void silk_SolveWithUpperTriangularFromLowerWdiagOnes_FLP(
+static OPUS_INLINE void silk_SolveWithUpperTriangularFromLowerWdiagOnes_FLP(
const silk_float *L, /* I Pointer to Lower Triangular Matrix */
opus_int M, /* I Dim of Matrix equation */
const silk_float *b, /* I b Vector */
@@ -109,7 +109,7 @@
silk_SolveWithUpperTriangularFromLowerWdiagOnes_FLP( &L[ 0 ][ 0 ], M, T, x );
}
-static inline void silk_SolveWithUpperTriangularFromLowerWdiagOnes_FLP(
+static OPUS_INLINE void silk_SolveWithUpperTriangularFromLowerWdiagOnes_FLP(
const silk_float *L, /* I Pointer to Lower Triangular Matrix */
opus_int M, /* I Dim of Matrix equation */
const silk_float *b, /* I b Vector */
@@ -131,7 +131,7 @@
}
}
-static inline void silk_SolveWithLowerTriangularWdiagOnes_FLP(
+static OPUS_INLINE void silk_SolveWithLowerTriangularWdiagOnes_FLP(
const silk_float *L, /* I Pointer to Lower Triangular Matrix */
opus_int M, /* I Dim of Matrix equation */
const silk_float *b, /* I b Vector */
@@ -153,7 +153,7 @@
}
}
-static inline void silk_LDL_FLP(
+static OPUS_INLINE void silk_LDL_FLP(
silk_float *A, /* I/O Pointer to Symetric Square Matrix */
opus_int M, /* I Size of Matrix */
silk_float *L, /* I/O Pointer to Square Upper triangular Matrix */
diff --git a/silk/float/wrappers_FLP.c b/silk/float/wrappers_FLP.c
index 0d33d9e..350599b 100644
--- a/silk/float/wrappers_FLP.c
+++ b/silk/float/wrappers_FLP.c
@@ -175,6 +175,7 @@
silk_float B[ MAX_NB_SUBFR * LTP_ORDER ], /* I/O (Un-)quantized LTP gains */
opus_int8 cbk_index[ MAX_NB_SUBFR ], /* O Codebook index */
opus_int8 *periodicity_index, /* O Periodicity index */
+ opus_int32 *sum_log_gain_Q7, /* I/O Cumulative max prediction gain */
const silk_float W[ MAX_NB_SUBFR * LTP_ORDER * LTP_ORDER ], /* I Error weights */
const opus_int mu_Q10, /* I Mu value (R/D tradeoff) */
const opus_int lowComplexity, /* I Flag for low complexity */
@@ -192,7 +193,7 @@
W_Q18[ i ] = (opus_int32)silk_float2int( W[ i ] * 262144.0f );
}
- silk_quant_LTP_gains( B_Q14, cbk_index, periodicity_index, W_Q18, mu_Q10, lowComplexity, nb_subfr );
+ silk_quant_LTP_gains( B_Q14, cbk_index, periodicity_index, sum_log_gain_Q7, W_Q18, mu_Q10, lowComplexity, nb_subfr );
for( i = 0; i < nb_subfr * LTP_ORDER; i++ ) {
B[ i ] = (silk_float)B_Q14[ i ] * ( 1.0f / 16384.0f );
diff --git a/silk/init_encoder.c b/silk/init_encoder.c
index 7a4d918..65995c3 100644
--- a/silk/init_encoder.c
+++ b/silk/init_encoder.c
@@ -34,12 +34,14 @@
#include "main_FLP.h"
#endif
#include "tuning_parameters.h"
+#include "cpu_support.h"
/*********************************/
/* Initialize Silk Encoder state */
/*********************************/
opus_int silk_init_encoder(
- silk_encoder_state_Fxx *psEnc /* I/O Pointer to Silk FIX encoder state */
+ silk_encoder_state_Fxx *psEnc, /* I/O Pointer to Silk FIX encoder state */
+ int arch /* I Run-time architecture */
)
{
opus_int ret = 0;
@@ -47,6 +49,8 @@
/* Clear the entire encoder state */
silk_memset( psEnc, 0, sizeof( silk_encoder_state_Fxx ) );
+ psEnc->sCmn.arch = arch;
+
psEnc->sCmn.variable_HP_smth1_Q15 = silk_LSHIFT( silk_lin2log( SILK_FIX_CONST( VARIABLE_HP_MIN_CUTOFF_HZ, 16 ) ) - ( 16 << 7 ), 8 );
psEnc->sCmn.variable_HP_smth2_Q15 = psEnc->sCmn.variable_HP_smth1_Q15;
diff --git a/silk/log2lin.c b/silk/log2lin.c
index 07d97a9..a692e00 100644
--- a/silk/log2lin.c
+++ b/silk/log2lin.c
@@ -41,7 +41,9 @@
if( inLog_Q7 < 0 ) {
return 0;
- }
+ } else if ( inLog_Q7 >= 3967 ) {
+ return silk_int32_MAX;
+ }
out = silk_LSHIFT( 1, silk_RSHIFT( inLog_Q7, 7 ) );
frac_Q7 = inLog_Q7 & 0x7F;
diff --git a/silk/macros.h b/silk/macros.h
index 35d63fa..a84e5a5 100644
--- a/silk/macros.h
+++ b/silk/macros.h
@@ -32,7 +32,10 @@
#include "config.h"
#endif
-/* This is an inline header file for general platform. */
+#include "opus_types.h"
+#include "opus_defines.h"
+
+/* This is an OPUS_INLINE header file for general platform. */
/* (a32 * (opus_int32)((opus_int16)(b32))) >> 16 output have to be 32bit int */
#define silk_SMULWB(a32, b32) ((((a32) >> 16) * (opus_int32)((opus_int16)(b32))) + ((((a32) & 0x0000FFFF) * (opus_int32)((opus_int16)(b32))) >> 16))
@@ -78,12 +81,12 @@
#include "ecintrin.h"
-static inline opus_int32 silk_CLZ16(opus_int16 in16)
+static OPUS_INLINE opus_int32 silk_CLZ16(opus_int16 in16)
{
return 32 - EC_ILOG(in16<<16|0x8000);
}
-static inline opus_int32 silk_CLZ32(opus_int32 in32)
+static OPUS_INLINE opus_int32 silk_CLZ32(opus_int32 in32)
{
return in32 ? 32 - EC_ILOG(in32) : 32;
}
@@ -100,11 +103,11 @@
(*((Matrix_base_adr) + ((row)+(M)*(column))))
#endif
-#ifdef ARMv4_ASM
+#ifdef OPUS_ARM_INLINE_ASM
#include "arm/macros_armv4.h"
#endif
-#ifdef ARMv5E_ASM
+#ifdef OPUS_ARM_INLINE_EDSP
#include "arm/macros_armv5e.h"
#endif
diff --git a/silk/main.h b/silk/main.h
index 8676316..2bdf897 100644
--- a/silk/main.h
+++ b/silk/main.h
@@ -204,6 +204,7 @@
opus_int16 B_Q14[ MAX_NB_SUBFR * LTP_ORDER ], /* I/O (un)quantized LTP gains */
opus_int8 cbk_index[ MAX_NB_SUBFR ], /* O Codebook Index */
opus_int8 *periodicity_index, /* O Periodicity Index */
+ opus_int32 *sum_gain_dB_Q7, /* I/O Cumulative max prediction gain */
const opus_int32 W_Q18[ MAX_NB_SUBFR*LTP_ORDER*LTP_ORDER ], /* I Error Weights in Q18 */
opus_int mu_Q9, /* I Mu value (R/D tradeoff) */
opus_int lowComplexity, /* I Flag for low complexity */
@@ -214,11 +215,14 @@
void silk_VQ_WMat_EC(
opus_int8 *ind, /* O index of best codebook vector */
opus_int32 *rate_dist_Q14, /* O best weighted quant error + mu * rate */
+ opus_int *gain_Q7, /* O sum of absolute LTP coefficients */
const opus_int16 *in_Q14, /* I input vector to be quantized */
const opus_int32 *W_Q18, /* I weighting matrix */
const opus_int8 *cb_Q7, /* I codebook */
+ const opus_uint8 *cb_gain_Q7, /* I codebook effective gain */
const opus_uint8 *cl_Q5, /* I code length for each codebook vector */
const opus_int mu_Q9, /* I tradeoff betw. weighted error and rate */
+ const opus_int32 max_gain_Q7, /* I maximum sum of absolute LTP coefficients */
opus_int L /* I number of vectors in codebook */
);
diff --git a/silk/quant_LTP_gains.c b/silk/quant_LTP_gains.c
index 43b43cb..fd0870d 100644
--- a/silk/quant_LTP_gains.c
+++ b/silk/quant_LTP_gains.c
@@ -30,11 +30,13 @@
#endif
#include "main.h"
+#include "tuning_parameters.h"
void silk_quant_LTP_gains(
opus_int16 B_Q14[ MAX_NB_SUBFR * LTP_ORDER ], /* I/O (un)quantized LTP gains */
opus_int8 cbk_index[ MAX_NB_SUBFR ], /* O Codebook Index */
opus_int8 *periodicity_index, /* O Periodicity Index */
+ opus_int32 *sum_log_gain_Q7, /* I/O Cumulative max prediction gain */
const opus_int32 W_Q18[ MAX_NB_SUBFR*LTP_ORDER*LTP_ORDER ], /* I Error Weights in Q18 */
opus_int mu_Q9, /* I Mu value (R/D tradeoff) */
opus_int lowComplexity, /* I Flag for low complexity */
@@ -45,18 +47,26 @@
opus_int8 temp_idx[ MAX_NB_SUBFR ];
const opus_uint8 *cl_ptr_Q5;
const opus_int8 *cbk_ptr_Q7;
+ const opus_uint8 *cbk_gain_ptr_Q7;
const opus_int16 *b_Q14_ptr;
const opus_int32 *W_Q18_ptr;
opus_int32 rate_dist_Q14_subfr, rate_dist_Q14, min_rate_dist_Q14;
+ opus_int32 sum_log_gain_tmp_Q7, best_sum_log_gain_Q7, max_gain_Q7, gain_Q7;
/***************************************************/
/* iterate over different codebooks with different */
/* rates/distortions, and choose best */
/***************************************************/
min_rate_dist_Q14 = silk_int32_MAX;
+ best_sum_log_gain_Q7 = 0;
for( k = 0; k < 3; k++ ) {
+ /* Safety margin for pitch gain control, to take into account factors
+ such as state rescaling/rewhitening. */
+ opus_int32 gain_safety = SILK_FIX_CONST( 0.4, 7 );
+
cl_ptr_Q5 = silk_LTP_gain_BITS_Q5_ptrs[ k ];
cbk_ptr_Q7 = silk_LTP_vq_ptrs_Q7[ k ];
+ cbk_gain_ptr_Q7 = silk_LTP_vq_gain_ptrs_Q7[ k ];
cbk_size = silk_LTP_vq_sizes[ k ];
/* Set up pointer to first subframe */
@@ -64,19 +74,28 @@
b_Q14_ptr = B_Q14;
rate_dist_Q14 = 0;
+ sum_log_gain_tmp_Q7 = *sum_log_gain_Q7;
for( j = 0; j < nb_subfr; j++ ) {
+ max_gain_Q7 = silk_log2lin( ( SILK_FIX_CONST( MAX_SUM_LOG_GAIN_DB / 6.0, 7 ) - sum_log_gain_tmp_Q7 )
+ + SILK_FIX_CONST( 7, 7 ) ) - gain_safety;
+
silk_VQ_WMat_EC(
&temp_idx[ j ], /* O index of best codebook vector */
&rate_dist_Q14_subfr, /* O best weighted quantization error + mu * rate */
+ &gain_Q7, /* O sum of absolute LTP coefficients */
b_Q14_ptr, /* I input vector to be quantized */
W_Q18_ptr, /* I weighting matrix */
cbk_ptr_Q7, /* I codebook */
+ cbk_gain_ptr_Q7, /* I codebook effective gains */
cl_ptr_Q5, /* I code length for each codebook vector */
mu_Q9, /* I tradeoff between weighted error and rate */
+ max_gain_Q7, /* I maximum sum of absolute LTP coefficients */
cbk_size /* I number of vectors in codebook */
);
rate_dist_Q14 = silk_ADD_POS_SAT32( rate_dist_Q14, rate_dist_Q14_subfr );
+ sum_log_gain_tmp_Q7 = silk_max(0, sum_log_gain_tmp_Q7
+ + silk_lin2log( gain_safety + gain_Q7 ) - SILK_FIX_CONST( 7, 7 ));
b_Q14_ptr += LTP_ORDER;
W_Q18_ptr += LTP_ORDER * LTP_ORDER;
@@ -89,6 +108,7 @@
min_rate_dist_Q14 = rate_dist_Q14;
*periodicity_index = (opus_int8)k;
silk_memcpy( cbk_index, temp_idx, nb_subfr * sizeof( opus_int8 ) );
+ best_sum_log_gain_Q7 = sum_log_gain_tmp_Q7;
}
/* Break early in low-complexity mode if rate distortion is below threshold */
@@ -103,5 +123,6 @@
B_Q14[ j * LTP_ORDER + k ] = silk_LSHIFT( cbk_ptr_Q7[ cbk_index[ j ] * LTP_ORDER + k ], 7 );
}
}
+ *sum_log_gain_Q7 = best_sum_log_gain_Q7;
}
diff --git a/silk/resampler_private_IIR_FIR.c b/silk/resampler_private_IIR_FIR.c
index 4cc8f3b..6b2b3a2 100644
--- a/silk/resampler_private_IIR_FIR.c
+++ b/silk/resampler_private_IIR_FIR.c
@@ -33,7 +33,7 @@
#include "resampler_private.h"
#include "stack_alloc.h"
-static inline opus_int16 *silk_resampler_private_IIR_FIR_INTERPOL(
+static OPUS_INLINE opus_int16 *silk_resampler_private_IIR_FIR_INTERPOL(
opus_int16 *out,
opus_int16 *buf,
opus_int32 max_index_Q16,
diff --git a/silk/resampler_private_down_FIR.c b/silk/resampler_private_down_FIR.c
index 73b1c40..783e42b 100644
--- a/silk/resampler_private_down_FIR.c
+++ b/silk/resampler_private_down_FIR.c
@@ -33,7 +33,7 @@
#include "resampler_private.h"
#include "stack_alloc.h"
-static inline opus_int16 *silk_resampler_private_down_FIR_INTERPOL(
+static OPUS_INLINE opus_int16 *silk_resampler_private_down_FIR_INTERPOL(
opus_int16 *out,
opus_int32 *buf,
const opus_int16 *FIR_Coefs,
diff --git a/silk/shell_coder.c b/silk/shell_coder.c
index 9fe5e40..796f57d 100644
--- a/silk/shell_coder.c
+++ b/silk/shell_coder.c
@@ -33,7 +33,7 @@
/* shell coder; pulse-subframe length is hardcoded */
-static inline void combine_pulses(
+static OPUS_INLINE void combine_pulses(
opus_int *out, /* O combined pulses vector [len] */
const opus_int *in, /* I input vector [2 * len] */
const opus_int len /* I number of OUTPUT samples */
@@ -45,7 +45,7 @@
}
}
-static inline void encode_split(
+static OPUS_INLINE void encode_split(
ec_enc *psRangeEnc, /* I/O compressor data structure */
const opus_int p_child1, /* I pulse amplitude of first child subframe */
const opus_int p, /* I pulse amplitude of current subframe */
@@ -57,7 +57,7 @@
}
}
-static inline void decode_split(
+static OPUS_INLINE void decode_split(
opus_int *p_child1, /* O pulse amplitude of first child subframe */
opus_int *p_child2, /* O pulse amplitude of second child subframe */
ec_dec *psRangeDec, /* I/O Compressor data structure */
diff --git a/silk/structs.h b/silk/structs.h
index 4ccd0c1..1826b36 100644
--- a/silk/structs.h
+++ b/silk/structs.h
@@ -171,6 +171,7 @@
opus_int32 pitchEstimationThreshold_Q16; /* Threshold for pitch estimator */
opus_int LTPQuantLowComplexity; /* Flag for low complexity LTP quantization */
opus_int mu_LTP_Q9; /* Rate-distortion tradeoff in LTP quantization */
+ opus_int32 sum_log_gain_Q7; /* Cumulative max prediction gain */
opus_int NLSF_MSVQ_Survivors; /* Number of survivors in NLSF MSVQ */
opus_int first_frame_after_reset; /* Flag for deactivating NLSF interpolation, pitch prediction */
opus_int controlled_since_last_payload; /* Flag for ensuring codec_control only runs once per packet */
@@ -191,6 +192,8 @@
SideInfoIndices indices;
opus_int8 pulses[ MAX_FRAME_LENGTH ];
+ int arch;
+
/* Input/output buffering */
opus_int16 inputBuf[ MAX_FRAME_LENGTH + 2 ]; /* Buffer containing input signal */
opus_int inputBufIx;
diff --git a/silk/tables.h b/silk/tables.h
index 18bf9f2..a91431e 100644
--- a/silk/tables.h
+++ b/silk/tables.h
@@ -78,6 +78,8 @@
extern const opus_uint8 * const silk_LTP_gain_BITS_Q5_ptrs[ NB_LTP_CBKS ]; /* 3 */
extern const opus_int16 silk_LTP_gain_middle_avg_RD_Q14;
extern const opus_int8 * const silk_LTP_vq_ptrs_Q7[ NB_LTP_CBKS ]; /* 168 */
+extern const opus_uint8 * const silk_LTP_vq_gain_ptrs_Q7[NB_LTP_CBKS];
+
extern const opus_int8 silk_LTP_vq_sizes[ NB_LTP_CBKS ]; /* 3 */
extern const opus_uint8 silk_LTPscale_iCDF[ 3 ]; /* 4 */
diff --git a/silk/tables_LTP.c b/silk/tables_LTP.c
index b0cff44..0e6a025 100644
--- a/silk/tables_LTP.c
+++ b/silk/tables_LTP.c
@@ -267,6 +267,30 @@
(opus_int8 *)&silk_LTP_gain_vq_2[0][0]
};
+/* Maximum frequency-dependent response of the pitch taps above,
+ computed as max(abs(freqz(taps))) */
+static const opus_uint8 silk_LTP_gain_vq_0_gain[8] = {
+ 46, 2, 90, 87, 93, 91, 82, 98
+};
+
+static const opus_uint8 silk_LTP_gain_vq_1_gain[16] = {
+ 109, 120, 118, 12, 113, 115, 117, 119,
+ 99, 59, 87, 111, 63, 111, 112, 80
+};
+
+static const opus_uint8 silk_LTP_gain_vq_2_gain[32] = {
+ 126, 124, 125, 124, 129, 121, 126, 23,
+ 132, 127, 127, 127, 126, 127, 122, 133,
+ 130, 134, 101, 118, 119, 145, 126, 86,
+ 124, 120, 123, 119, 170, 173, 107, 109
+};
+
+const opus_uint8 * const silk_LTP_vq_gain_ptrs_Q7[NB_LTP_CBKS] = {
+ &silk_LTP_gain_vq_0_gain[0],
+ &silk_LTP_gain_vq_1_gain[0],
+ &silk_LTP_gain_vq_2_gain[0]
+};
+
const opus_int8 silk_LTP_vq_sizes[NB_LTP_CBKS] = {
8, 16, 32
};
diff --git a/silk/tuning_parameters.h b/silk/tuning_parameters.h
index bf4f63f..e1057bb 100644
--- a/silk/tuning_parameters.h
+++ b/silk/tuning_parameters.h
@@ -50,7 +50,7 @@
/* Linear prediction */
/*********************/
-/* LPC analysis defines: regularization and bandwidth expansion */
+/* LPC analysis regularization */
#define FIND_LPC_COND_FAC 1e-5f
/* LTP analysis defines */
@@ -63,6 +63,9 @@
#define MU_LTP_QUANT_MB 0.025f
#define MU_LTP_QUANT_WB 0.02f
+/* Max cumulative LTP gain */
+#define MAX_SUM_LOG_GAIN_DB 250.0f
+
/***********************/
/* High pass filtering */
/***********************/
diff --git a/silk/typedef.h b/silk/typedef.h
index 6394cde..97b7e70 100644
--- a/silk/typedef.h
+++ b/silk/typedef.h
@@ -29,6 +29,7 @@
#define SILK_TYPEDEF_H
#include "opus_types.h"
+#include "opus_defines.h"
#ifndef FIXED_POINT
# include <float.h>
@@ -63,7 +64,7 @@
#ifdef __GNUC__
__attribute__((noreturn))
#endif
-static inline void _silk_fatal(const char *str, const char *file, int line)
+static OPUS_INLINE void _silk_fatal(const char *str, const char *file, int line)
{
fprintf (stderr, "Fatal (internal) error in %s, line %d: %s\n", file, line, str);
abort();
diff --git a/src/analysis.c b/src/analysis.c
index 53247df..778a62a 100644
--- a/src/analysis.c
+++ b/src/analysis.c
@@ -115,7 +115,7 @@
#define cB 0.67848403f
#define cC 0.08595542f
#define cE ((float)M_PI/2)
-static inline float fast_atan2f(float y, float x) {
+static OPUS_INLINE float fast_atan2f(float y, float x) {
float x2, y2;
/* Should avoid underflow on the values we'll get */
if (ABS16(x)+ABS16(y)<1e-9f)
@@ -253,10 +253,10 @@
for (i=0;i<N2;i++)
{
float w = analysis_window[i];
- in[i].r = w*tonal->inmem[i];
- in[i].i = w*tonal->inmem[N2+i];
- in[N-i-1].r = w*tonal->inmem[N-i-1];
- in[N-i-1].i = w*tonal->inmem[N+N2-i-1];
+ in[i].r = (kiss_fft_scalar)(w*tonal->inmem[i]);
+ in[i].i = (kiss_fft_scalar)(w*tonal->inmem[N2+i]);
+ in[N-i-1].r = (kiss_fft_scalar)(w*tonal->inmem[N-i-1]);
+ in[N-i-1].i = (kiss_fft_scalar)(w*tonal->inmem[N+N2-i-1]);
}
OPUS_MOVE(tonal->inmem, tonal->inmem+ANALYSIS_BUF_SIZE-240, 240);
remaining = len - (ANALYSIS_BUF_SIZE-tonal->mem_fill);
@@ -270,10 +270,10 @@
float angle, d_angle, d2_angle;
float angle2, d_angle2, d2_angle2;
float mod1, mod2, avg_mod;
- X1r = out[i].r+out[N-i].r;
- X1i = out[i].i-out[N-i].i;
- X2r = out[i].i+out[N-i].i;
- X2i = out[N-i].r-out[i].r;
+ X1r = (float)out[i].r+out[N-i].r;
+ X1i = (float)out[i].i-out[N-i].i;
+ X2r = (float)out[i].i+out[N-i].i;
+ X2i = (float)out[N-i].r-out[i].r;
angle = (float)(.5f/M_PI)*fast_atan2f(X1i, X1r);
d_angle = angle - A[i];
@@ -317,7 +317,6 @@
}
relativeE = 0;
frame_loudness = 0;
- bandwidth_mask = 0;
for (b=0;b<NB_TBANDS;b++)
{
float E=0, tE=0, nE=0;
@@ -338,7 +337,7 @@
tonal->E[tonal->E_count][b] = E;
frame_noisiness += nE/(1e-15f+E);
- frame_loudness += sqrt(E+1e-10f);
+ frame_loudness += (float)sqrt(E+1e-10f);
logE[b] = (float)log(E+1e-10f);
tonal->lowE[b] = MIN32(logE[b], tonal->lowE[b]+.01f);
tonal->highE[b] = MAX32(logE[b], tonal->highE[b]-.1f);
@@ -347,21 +346,21 @@
tonal->highE[b]+=.5f;
tonal->lowE[b]-=.5f;
}
- relativeE += (logE[b]-tonal->lowE[b])/(1e-15+tonal->highE[b]-tonal->lowE[b]);
+ relativeE += (logE[b]-tonal->lowE[b])/(1e-15f+tonal->highE[b]-tonal->lowE[b]);
L1=L2=0;
for (i=0;i<NB_FRAMES;i++)
{
- L1 += sqrt(tonal->E[i][b]);
+ L1 += (float)sqrt(tonal->E[i][b]);
L2 += tonal->E[i][b];
}
- stationarity = MIN16(0.99f,L1/sqrt(1e-15+NB_FRAMES*L2));
+ stationarity = MIN16(0.99f,L1/(float)sqrt(1e-15+NB_FRAMES*L2));
stationarity *= stationarity;
stationarity *= stationarity;
frame_stationarity += stationarity;
/*band_tonality[b] = tE/(1e-15+E)*/;
- band_tonality[b] = MAX16(tE/(1e-15+E), stationarity*tonal->prev_band_tonality[b]);
+ band_tonality[b] = MAX16(tE/(1e-15f+E), stationarity*tonal->prev_band_tonality[b]);
#if 0
if (b>=NB_TONAL_SKIP_BANDS)
{
@@ -476,7 +475,7 @@
tonal->mem[i] = BFCC[i];
}
for (i=0;i<9;i++)
- features[11+i] = sqrt(tonal->std[i]);
+ features[11+i] = (float)sqrt(tonal->std[i]);
features[20] = info->tonality;
features[21] = info->activity;
features[22] = frame_stationarity;
@@ -597,7 +596,6 @@
if (tonal->speech_confidence_count==0)
tonal->speech_confidence = .1f;
}
- psum = MAX16(tonal->speech_confidence, MIN16(tonal->music_confidence, psum));
}
if (tonal->last_music != (tonal->music_prob>.5f))
tonal->last_transition=0;
diff --git a/src/analysis.h b/src/analysis.h
index cf37792..be0388f 100644
--- a/src/analysis.h
+++ b/src/analysis.h
@@ -60,7 +60,7 @@
int last_music;
int last_transition;
int count;
- opus_val32 subframe_mem[3];
+ float subframe_mem[3];
int analysis_offset;
/** Probability of having speech for time i to DETECT_SIZE-1 (and music before).
pspeech[0] is the probability that all frames in the window are speech. */
diff --git a/src/mlp.c b/src/mlp.c
index 73b1d31..4638602 100644
--- a/src/mlp.c
+++ b/src/mlp.c
@@ -29,6 +29,9 @@
#include "config.h"
#endif
+#include "opus_types.h"
+#include "opus_defines.h"
+
#include <math.h>
#include "mlp.h"
#include "arch.h"
@@ -36,7 +39,7 @@
#define MAX_NEURONS 100
#if 0
-static inline opus_val16 tansig_approx(opus_val32 _x) /* Q19 */
+static OPUS_INLINE opus_val16 tansig_approx(opus_val32 _x) /* Q19 */
{
int i;
opus_val16 xx; /* Q11 */
@@ -62,14 +65,15 @@
}
#else
/*extern const float tansig_table[501];*/
-static inline float tansig_approx(float x)
+static OPUS_INLINE float tansig_approx(float x)
{
int i;
float y, dy;
float sign=1;
- if (x>=8)
+ /* Tests are reversed to catch NaNs */
+ if (!(x<8))
return 1;
- if (x<=-8)
+ if (!(x>-8))
return -1;
if (x<0)
{
diff --git a/src/opus.c b/src/opus.c
index 170bc4b..30890b9 100644
--- a/src/opus.c
+++ b/src/opus.c
@@ -39,6 +39,8 @@
int i;
float *x;
+ if (C<1 || N<1 || !_x || !declip_mem) return;
+
/* First thing: saturate everything to +/- 2 which is the highest level our
non-linearity can handle. At the point where the signal reaches +/-2,
the derivative will be zero anyway, so this doesn't introduce any
@@ -144,3 +146,184 @@
}
}
+static int parse_size(const unsigned char *data, opus_int32 len, opus_int16 *size)
+{
+ if (len<1)
+ {
+ *size = -1;
+ return -1;
+ } else if (data[0]<252)
+ {
+ *size = data[0];
+ return 1;
+ } else if (len<2)
+ {
+ *size = -1;
+ return -1;
+ } else {
+ *size = 4*data[1] + data[0];
+ return 2;
+ }
+}
+
+int opus_packet_parse_impl(const unsigned char *data, opus_int32 len,
+ int self_delimited, unsigned char *out_toc,
+ const unsigned char *frames[48], opus_int16 size[48],
+ int *payload_offset, opus_int32 *packet_offset)
+{
+ int i, bytes;
+ int count;
+ int cbr;
+ unsigned char ch, toc;
+ int framesize;
+ opus_int32 last_size;
+ opus_int32 pad = 0;
+ const unsigned char *data0 = data;
+
+ if (size==NULL)
+ return OPUS_BAD_ARG;
+
+ framesize = opus_packet_get_samples_per_frame(data, 48000);
+
+ cbr = 0;
+ toc = *data++;
+ len--;
+ last_size = len;
+ switch (toc&0x3)
+ {
+ /* One frame */
+ case 0:
+ count=1;
+ break;
+ /* Two CBR frames */
+ case 1:
+ count=2;
+ cbr = 1;
+ if (!self_delimited)
+ {
+ if (len&0x1)
+ return OPUS_INVALID_PACKET;
+ last_size = len/2;
+ /* If last_size doesn't fit in size[0], we'll catch it later */
+ size[0] = (opus_int16)last_size;
+ }
+ break;
+ /* Two VBR frames */
+ case 2:
+ count = 2;
+ bytes = parse_size(data, len, size);
+ len -= bytes;
+ if (size[0]<0 || size[0] > len)
+ return OPUS_INVALID_PACKET;
+ data += bytes;
+ last_size = len-size[0];
+ break;
+ /* Multiple CBR/VBR frames (from 0 to 120 ms) */
+ default: /*case 3:*/
+ if (len<1)
+ return OPUS_INVALID_PACKET;
+ /* Number of frames encoded in bits 0 to 5 */
+ ch = *data++;
+ count = ch&0x3F;
+ if (count <= 0 || framesize*count > 5760)
+ return OPUS_INVALID_PACKET;
+ len--;
+ /* Padding flag is bit 6 */
+ if (ch&0x40)
+ {
+ int p;
+ do {
+ int tmp;
+ if (len<=0)
+ return OPUS_INVALID_PACKET;
+ p = *data++;
+ len--;
+ tmp = p==255 ? 254: p;
+ len -= tmp;
+ pad += tmp;
+ } while (p==255);
+ }
+ if (len<0)
+ return OPUS_INVALID_PACKET;
+ /* VBR flag is bit 7 */
+ cbr = !(ch&0x80);
+ if (!cbr)
+ {
+ /* VBR case */
+ last_size = len;
+ for (i=0;i<count-1;i++)
+ {
+ bytes = parse_size(data, len, size+i);
+ len -= bytes;
+ if (size[i]<0 || size[i] > len)
+ return OPUS_INVALID_PACKET;
+ data += bytes;
+ last_size -= bytes+size[i];
+ }
+ if (last_size<0)
+ return OPUS_INVALID_PACKET;
+ } else if (!self_delimited)
+ {
+ /* CBR case */
+ last_size = len/count;
+ if (last_size*count!=len)
+ return OPUS_INVALID_PACKET;
+ for (i=0;i<count-1;i++)
+ size[i] = (opus_int16)last_size;
+ }
+ break;
+ }
+ /* Self-delimited framing has an extra size for the last frame. */
+ if (self_delimited)
+ {
+ bytes = parse_size(data, len, size+count-1);
+ len -= bytes;
+ if (size[count-1]<0 || size[count-1] > len)
+ return OPUS_INVALID_PACKET;
+ data += bytes;
+ /* For CBR packets, apply the size to all the frames. */
+ if (cbr)
+ {
+ if (size[count-1]*count > len)
+ return OPUS_INVALID_PACKET;
+ for (i=0;i<count-1;i++)
+ size[i] = size[count-1];
+ } else if (bytes+size[count-1] > last_size)
+ return OPUS_INVALID_PACKET;
+ } else
+ {
+ /* Because it's not encoded explicitly, it's possible the size of the
+ last packet (or all the packets, for the CBR case) is larger than
+ 1275. Reject them here.*/
+ if (last_size > 1275)
+ return OPUS_INVALID_PACKET;
+ size[count-1] = (opus_int16)last_size;
+ }
+
+ if (payload_offset)
+ *payload_offset = (int)(data-data0);
+
+ for (i=0;i<count;i++)
+ {
+ if (frames)
+ frames[i] = data;
+ data += size[i];
+ }
+
+ if (packet_offset)
+ *packet_offset = pad+(opus_int32)(data-data0);
+
+ if (out_toc)
+ *out_toc = toc;
+
+ return count;
+}
+
+int opus_packet_parse(const unsigned char *data, opus_int32 len,
+ unsigned char *out_toc, const unsigned char *frames[48],
+ opus_int16 size[48], int *payload_offset)
+{
+ return opus_packet_parse_impl(data, len, 0, out_toc,
+ frames, size, payload_offset, NULL);
+}
+
diff --git a/src/opus_decoder.c b/src/opus_decoder.c
index 5b56ac1..919ba52 100644
--- a/src/opus_decoder.c
+++ b/src/opus_decoder.c
@@ -26,11 +26,15 @@
*/
#ifdef HAVE_CONFIG_H
-#include "config.h"
+# include "config.h"
#endif
#ifndef OPUS_BUILD
-#error "OPUS_BUILD _MUST_ be defined to build Opus. This probably means you need other defines as well, as in a config.h. See the included build files for details."
+# error "OPUS_BUILD _MUST_ be defined to build Opus. This probably means you need other defines as well, as in a config.h. See the included build files for details."
+#endif
+
+#if defined(__GNUC__) && (__GNUC__ >= 2) && !defined(__OPTIMIZE__)
+# pragma message "You appear to be compiling without optimization, if so opus will be very slow."
#endif
#include <stdarg.h>
@@ -71,11 +75,10 @@
#endif
opus_uint32 rangeFinal;
- int arch;
};
#ifdef FIXED_POINT
-static inline opus_int16 SAT16(opus_int32 x) {
+static OPUS_INLINE opus_int16 SAT16(opus_int32 x) {
return x > 32767 ? 32767 : x < -32768 ? -32768 : (opus_int16)x;
}
#endif
@@ -121,7 +124,6 @@
st->Fs = Fs;
st->DecControl.API_sampleRate = st->Fs;
st->DecControl.nChannelsAPI = st->channels;
- st->arch = opus_select_arch();
/* Reset decoder */
ret = silk_InitDecoder( silk_dec );
@@ -257,26 +259,44 @@
ec_dec_init(&dec,(unsigned char*)data,len);
} else {
audiosize = frame_size;
+ mode = st->prev_mode;
- if (st->prev_mode == 0)
+ if (mode == 0)
{
/* If we haven't got any packet yet, all we can do is return zeros */
for (i=0;i<audiosize*st->channels;i++)
pcm[i] = 0;
RESTORE_STACK;
return audiosize;
- } else {
- mode = st->prev_mode;
+ }
+
+ /* Avoids trying to run the PLC on sizes other than 2.5 (CELT), 5 (CELT),
+ 10, or 20 (e.g. 12.5 or 30 ms). */
+ if (audiosize > F20)
+ {
+ do {
+ int ret = opus_decode_frame(st, NULL, 0, pcm, IMIN(audiosize, F20), 0);
+ if (ret<0)
+ {
+ RESTORE_STACK;
+ return ret;
+ }
+ pcm += ret*st->channels;
+ audiosize -= ret;
+ } while (audiosize > 0);
+ RESTORE_STACK;
+ return frame_size;
+ } else if (audiosize < F20)
+ {
+ if (audiosize > F10)
+ audiosize = F10;
+ else if (mode != MODE_SILK_ONLY && audiosize > F5 && audiosize < F10)
+ audiosize = F5;
}
}
- /* For CELT/hybrid PLC of more than 20 ms, opus_decode_native() will do
- multiple calls */
- if (data==NULL && mode != MODE_SILK_ONLY)
- frame_size = IMIN(frame_size, F20);
-
- pcm_transition_silk_size = 0;
- pcm_transition_celt_size = 0;
+ pcm_transition_silk_size = ALLOC_NONE;
+ pcm_transition_celt_size = ALLOC_NONE;
if (data!=NULL && st->prev_mode > 0 && (
(mode == MODE_CELT_ONLY && st->prev_mode != MODE_CELT_ONLY && !st->prev_redundancy)
|| (mode != MODE_CELT_ONLY && st->prev_mode == MODE_CELT_ONLY) )
@@ -305,7 +325,7 @@
}
/* Don't allocate any memory when in CELT-only mode */
- pcm_silk_size = (mode != MODE_CELT_ONLY) ? IMAX(F10, frame_size)*st->channels : 0;
+ pcm_silk_size = (mode != MODE_CELT_ONLY) ? IMAX(F10, frame_size)*st->channels : ALLOC_NONE;
ALLOC(pcm_silk, pcm_silk_size, opus_int16);
/* SILK processing */
@@ -355,7 +375,7 @@
pcm_ptr[i] = 0;
} else {
RESTORE_STACK;
- return OPUS_INVALID_PACKET;
+ return OPUS_INTERNAL_ERROR;
}
}
pcm_ptr += silk_frame_size * st->channels;
@@ -422,7 +442,7 @@
if (redundancy)
{
transition = 0;
- pcm_transition_silk_size=0;
+ pcm_transition_silk_size=ALLOC_NONE;
}
ALLOC(pcm_transition_silk, pcm_transition_silk_size, opus_val16);
@@ -434,7 +454,7 @@
}
/* Only allocation memory for redundancy if/when needed */
- redundant_audio_size = redundancy ? F5*st->channels : 0;
+ redundant_audio_size = redundancy ? F5*st->channels : ALLOC_NONE;
ALLOC(redundant_audio, redundant_audio_size, opus_val16);
/* 5 ms redundant frame for CELT->SILK*/
@@ -561,189 +581,13 @@
}
-static int parse_size(const unsigned char *data, opus_int32 len, opus_int16 *size)
-{
- if (len<1)
- {
- *size = -1;
- return -1;
- } else if (data[0]<252)
- {
- *size = data[0];
- return 1;
- } else if (len<2)
- {
- *size = -1;
- return -1;
- } else {
- *size = 4*data[1] + data[0];
- return 2;
- }
-}
-
-static int opus_packet_parse_impl(const unsigned char *data, opus_int32 len,
- int self_delimited, unsigned char *out_toc,
- const unsigned char *frames[48], opus_int16 size[48], int *payload_offset)
-{
- int i, bytes;
- int count;
- int cbr;
- unsigned char ch, toc;
- int framesize;
- opus_int32 last_size;
- const unsigned char *data0 = data;
-
- if (size==NULL)
- return OPUS_BAD_ARG;
-
- framesize = opus_packet_get_samples_per_frame(data, 48000);
-
- cbr = 0;
- toc = *data++;
- len--;
- last_size = len;
- switch (toc&0x3)
- {
- /* One frame */
- case 0:
- count=1;
- break;
- /* Two CBR frames */
- case 1:
- count=2;
- cbr = 1;
- if (!self_delimited)
- {
- if (len&0x1)
- return OPUS_INVALID_PACKET;
- last_size = len/2;
- /* If last_size doesn't fit in size[0], we'll catch it later */
- size[0] = (opus_int16)last_size;
- }
- break;
- /* Two VBR frames */
- case 2:
- count = 2;
- bytes = parse_size(data, len, size);
- len -= bytes;
- if (size[0]<0 || size[0] > len)
- return OPUS_INVALID_PACKET;
- data += bytes;
- last_size = len-size[0];
- break;
- /* Multiple CBR/VBR frames (from 0 to 120 ms) */
- default: /*case 3:*/
- if (len<1)
- return OPUS_INVALID_PACKET;
- /* Number of frames encoded in bits 0 to 5 */
- ch = *data++;
- count = ch&0x3F;
- if (count <= 0 || framesize*count > 5760)
- return OPUS_INVALID_PACKET;
- len--;
- /* Padding flag is bit 6 */
- if (ch&0x40)
- {
- int p;
- do {
- if (len<=0)
- return OPUS_INVALID_PACKET;
- p = *data++;
- len--;
- len -= p==255 ? 254: p;
- } while (p==255);
- }
- if (len<0)
- return OPUS_INVALID_PACKET;
- /* VBR flag is bit 7 */
- cbr = !(ch&0x80);
- if (!cbr)
- {
- /* VBR case */
- last_size = len;
- for (i=0;i<count-1;i++)
- {
- bytes = parse_size(data, len, size+i);
- len -= bytes;
- if (size[i]<0 || size[i] > len)
- return OPUS_INVALID_PACKET;
- data += bytes;
- last_size -= bytes+size[i];
- }
- if (last_size<0)
- return OPUS_INVALID_PACKET;
- } else if (!self_delimited)
- {
- /* CBR case */
- last_size = len/count;
- if (last_size*count!=len)
- return OPUS_INVALID_PACKET;
- for (i=0;i<count-1;i++)
- size[i] = (opus_int16)last_size;
- }
- break;
- }
- /* Self-delimited framing has an extra size for the last frame. */
- if (self_delimited)
- {
- bytes = parse_size(data, len, size+count-1);
- len -= bytes;
- if (size[count-1]<0 || size[count-1] > len)
- return OPUS_INVALID_PACKET;
- data += bytes;
- /* For CBR packets, apply the size to all the frames. */
- if (cbr)
- {
- if (size[count-1]*count > len)
- return OPUS_INVALID_PACKET;
- for (i=0;i<count-1;i++)
- size[i] = size[count-1];
- } else if(size[count-1] > last_size)
- return OPUS_INVALID_PACKET;
- } else
- {
- /* Because it's not encoded explicitly, it's possible the size of the
- last packet (or all the packets, for the CBR case) is larger than
- 1275. Reject them here.*/
- if (last_size > 1275)
- return OPUS_INVALID_PACKET;
- size[count-1] = (opus_int16)last_size;
- }
-
- if (frames)
- {
- for (i=0;i<count;i++)
- {
- frames[i] = data;
- data += size[i];
- }
- }
-
- if (out_toc)
- *out_toc = toc;
-
- if (payload_offset)
- *payload_offset = (int)(data-data0);
-
- return count;
-}
-
-int opus_packet_parse(const unsigned char *data, opus_int32 len,
- unsigned char *out_toc, const unsigned char *frames[48],
- opus_int16 size[48], int *payload_offset)
-{
- return opus_packet_parse_impl(data, len, 0, out_toc,
- frames, size, payload_offset);
-}
-
int opus_decode_native(OpusDecoder *st, const unsigned char *data,
opus_int32 len, opus_val16 *pcm, int frame_size, int decode_fec,
- int self_delimited, int *packet_offset, int soft_clip)
+ int self_delimited, opus_int32 *packet_offset, int soft_clip)
{
int i, nb_samples;
int count, offset;
unsigned char toc;
- int tot_offset;
int packet_frame_size, packet_bandwidth, packet_mode, packet_stream_channels;
/* 48 x 2.5 ms = 120 ms */
opus_int16 size[48];
@@ -775,7 +619,10 @@
packet_frame_size = opus_packet_get_samples_per_frame(data, st->Fs);
packet_stream_channels = opus_packet_get_nb_channels(data);
- count = opus_packet_parse_impl(data, len, self_delimited, &toc, NULL, size, &offset);
+ count = opus_packet_parse_impl(data, len, self_delimited, &toc, NULL,
+ size, &offset, packet_offset);
+ if (count<0)
+ return count;
data += offset;
@@ -814,11 +661,6 @@
return frame_size;
}
}
- tot_offset = 0;
- if (count < 0)
- return count;
-
- tot_offset += offset;
if (count*packet_frame_size > frame_size)
return OPUS_BUFFER_TOO_SMALL;
@@ -838,11 +680,8 @@
return ret;
celt_assert(ret==packet_frame_size);
data += size[i];
- tot_offset += size[i];
nb_samples += ret;
}
- if (packet_offset != NULL)
- *packet_offset = tot_offset;
st->last_packet_duration = nb_samples;
if (OPUS_CHECK_ARRAY(pcm, nb_samples*st->channels))
OPUS_PRINT_INT(nb_samples);
@@ -860,6 +699,8 @@
int opus_decode(OpusDecoder *st, const unsigned char *data,
opus_int32 len, opus_val16 *pcm, int frame_size, int decode_fec)
{
+ if(frame_size<=0)
+ return OPUS_BAD_ARG;
return opus_decode_native(st, data, len, pcm, frame_size, decode_fec, 0, NULL, 0);
}
@@ -871,6 +712,11 @@
int ret, i;
ALLOC_STACK;
+ if(frame_size<=0)
+ {
+ RESTORE_STACK;
+ return OPUS_BAD_ARG;
+ }
ALLOC(out, frame_size*st->channels, opus_int16);
ret = opus_decode_native(st, data, len, out, frame_size, decode_fec, 0, NULL, 0);
@@ -893,7 +739,7 @@
int ret, i;
ALLOC_STACK;
- if(frame_size<0)
+ if(frame_size<=0)
{
RESTORE_STACK;
return OPUS_BAD_ARG;
@@ -914,6 +760,8 @@
int opus_decode_float(OpusDecoder *st, const unsigned char *data,
opus_int32 len, opus_val16 *pcm, int frame_size, int decode_fec)
{
+ if(frame_size<=0)
+ return OPUS_BAD_ARG;
return opus_decode_native(st, data, len, pcm, frame_size, decode_fec, 0, NULL, 0);
}
diff --git a/src/opus_demo.c b/src/opus_demo.c
index 9771ed8..f8cdf03 100644
--- a/src/opus_demo.c
+++ b/src/opus_demo.c
@@ -79,15 +79,6 @@
| ((opus_uint32)ch[2]<< 8) | (opus_uint32)ch[3];
}
-static void check_decoder_option(int encode_only, const char *opt)
-{
- if (encode_only)
- {
- fprintf(stderr, "option %s is only for decoding\n", opt);
- exit(EXIT_FAILURE);
- }
-}
-
static void check_encoder_option(int decode_only, const char *opt)
{
if (decode_only)
@@ -317,13 +308,6 @@
}
sampling_rate = (opus_int32)atol(argv[args]);
args++;
- channels = atoi(argv[args]);
- args++;
- if (!decode_only)
- {
- bitrate_bps = (opus_int32)atol(argv[args]);
- args++;
- }
if (sampling_rate != 8000 && sampling_rate != 12000
&& sampling_rate != 16000 && sampling_rate != 24000
@@ -335,6 +319,21 @@
}
frame_size = sampling_rate/50;
+ channels = atoi(argv[args]);
+ args++;
+
+ if (channels < 1 || channels > 2)
+ {
+ fprintf(stderr, "Opus_demo supports only 1 or 2 channels.\n");
+ return EXIT_FAILURE;
+ }
+
+ if (!decode_only)
+ {
+ bitrate_bps = (opus_int32)atol(argv[args]);
+ args++;
+ }
+
/* defaults: */
use_vbr = 1;
bandwidth = OPUS_AUTO;
@@ -425,7 +424,6 @@
use_dtx = 1;
args++;
} else if( strcmp( argv[ args ], "-loss" ) == 0 ) {
- check_decoder_option(encode_only, "-loss");
packet_loss_perc = atoi( argv[ args + 1 ] );
args += 2;
} else if( strcmp( argv[ args ], "-sweep" ) == 0 ) {
@@ -737,6 +735,18 @@
}
}
+#if 0 /* This is for testing the padding code, do not enable by default */
+ if (len[toggle]<1275)
+ {
+ int new_len = len[toggle]+rand()%(max_payload_bytes-len[toggle]);
+ if ((err = opus_packet_pad(data[toggle], len[toggle], new_len)) != OPUS_OK)
+ {
+ fprintf(stderr, "padding failed: %s\n", opus_strerror(err));
+ return EXIT_FAILURE;
+ }
+ len[toggle] = new_len;
+ }
+#endif
if (encode_only)
{
unsigned char int_field[4];
diff --git a/src/opus_encoder.c b/src/opus_encoder.c
index f6f0ce5..fbd3de6 100644
--- a/src/opus_encoder.c
+++ b/src/opus_encoder.c
@@ -104,7 +104,7 @@
int analysis_offset;
#endif
opus_uint32 rangeFinal;
- int arch;
+ int arch;
};
/* Transition tables for the voice and music. First column is the
@@ -114,35 +114,35 @@
11000, 1000, /* NB<->MB */
14000, 1000, /* MB<->WB */
17000, 1000, /* WB<->SWB */
- 20000, 1000, /* SWB<->FB */
+ 21000, 2000, /* SWB<->FB */
};
static const opus_int32 mono_music_bandwidth_thresholds[8] = {
- 14000, 1000, /* MB not allowed */
- 18000, 2000, /* MB<->WB */
- 24000, 2000, /* WB<->SWB */
- 33000, 2000, /* SWB<->FB */
+ 12000, 1000, /* NB<->MB */
+ 15000, 1000, /* MB<->WB */
+ 18000, 2000, /* WB<->SWB */
+ 22000, 2000, /* SWB<->FB */
};
static const opus_int32 stereo_voice_bandwidth_thresholds[8] = {
11000, 1000, /* NB<->MB */
14000, 1000, /* MB<->WB */
21000, 2000, /* WB<->SWB */
- 32000, 2000, /* SWB<->FB */
+ 28000, 2000, /* SWB<->FB */
};
static const opus_int32 stereo_music_bandwidth_thresholds[8] = {
- 14000, 1000, /* MB not allowed */
+ 12000, 1000, /* NB<->MB */
18000, 2000, /* MB<->WB */
- 24000, 2000, /* WB<->SWB */
- 48000, 2000, /* SWB<->FB */
+ 21000, 2000, /* WB<->SWB */
+ 30000, 2000, /* SWB<->FB */
};
/* Threshold bit-rates for switching between mono and stereo */
-static const opus_int32 stereo_voice_threshold = 31000;
-static const opus_int32 stereo_music_threshold = 31000;
+static const opus_int32 stereo_voice_threshold = 30000;
+static const opus_int32 stereo_music_threshold = 30000;
/* Threshold bit-rate for switching between SILK/hybrid and CELT-only */
static const opus_int32 mode_thresholds[2][2] = {
/* voice */ /* music */
- { 64000, 20000}, /* mono */
- { 36000, 20000}, /* stereo */
+ { 64000, 16000}, /* mono */
+ { 36000, 16000}, /* stereo */
};
int opus_encoder_get_size(int channels)
@@ -188,7 +188,7 @@
st->arch = opus_select_arch();
- ret = silk_InitEncoder( silk_enc, &st->silk_mode );
+ ret = silk_InitEncoder( silk_enc, st->arch, &st->silk_mode );
if(ret)return OPUS_INTERNAL_ERROR;
/* default SILK parameters */
@@ -205,10 +205,11 @@
st->silk_mode.useInBandFEC = 0;
st->silk_mode.useDTX = 0;
st->silk_mode.useCBR = 0;
+ st->silk_mode.reducedDependency = 0;
/* Create CELT encoder */
/* Initialize CELT encoder */
- err = celt_encoder_init(celt_enc, Fs, channels);
+ err = celt_encoder_init(celt_enc, Fs, channels, st->arch);
if(err!=OPUS_OK)return OPUS_INTERNAL_ERROR;
celt_encoder_ctl(celt_enc, CELT_SET_SIGNALLING(0));
@@ -244,44 +245,6 @@
return OPUS_OK;
}
-static int pad_frame(unsigned char *data, opus_int32 len, opus_int32 new_len)
-{
- if (len == new_len)
- return 0;
- if (len > new_len)
- return 1;
-
- if ((data[0]&0x3)==0)
- {
- int i;
- int padding, nb_255s;
-
- padding = new_len - len;
- if (padding >= 2)
- {
- nb_255s = (padding-2)/255;
-
- for (i=len-1;i>=1;i--)
- data[i+nb_255s+2] = data[i];
- data[0] |= 0x3;
- data[1] = 0x41;
- for (i=0;i<nb_255s;i++)
- data[i+2] = 255;
- data[nb_255s+2] = padding-255*nb_255s-2;
- for (i=len+3+nb_255s;i<new_len;i++)
- data[i] = 0;
- } else {
- for (i=len-1;i>=1;i--)
- data[i+1] = data[i];
- data[0] |= 0x3;
- data[1] = 1;
- }
- return 0;
- } else {
- return 1;
- }
-}
-
static unsigned char gen_toc(int mode, int framerate, int bandwidth, int channels)
{
int period;
@@ -686,14 +649,14 @@
}
int optimize_framesize(const opus_val16 *x, int len, int C, opus_int32 Fs,
- int bitrate, opus_val16 tonality, opus_val32 *mem, int buffering,
+ int bitrate, opus_val16 tonality, float *mem, int buffering,
downmix_func downmix)
{
int N;
int i;
float e[MAX_DYNAMIC_FRAMESIZE+4];
float e_1[MAX_DYNAMIC_FRAMESIZE+3];
- float memx;
+ opus_val32 memx;
int bestLM=0;
int subframe;
int pos;
@@ -720,11 +683,12 @@
pos=1;
}
N=IMIN(len/subframe, MAX_DYNAMIC_FRAMESIZE);
- memx = x[0];
+ /* Just silencing a warning, it's really initialized later */
+ memx = 0;
for (i=0;i<N;i++)
{
float tmp;
- float tmpx;
+ opus_val32 tmpx;
int j;
tmp=EPSILON;
@@ -734,7 +698,7 @@
for (j=0;j<subframe;j++)
{
tmpx = sub[j];
- tmp += (tmpx-memx)*(tmpx-memx);
+ tmp += (tmpx-memx)*(float)(tmpx-memx);
memx = tmpx;
}
e[i+pos] = tmp;
@@ -856,7 +820,11 @@
opus_int32 compute_frame_size(const void *analysis_pcm, int frame_size,
int variable_duration, int C, opus_int32 Fs, int bitrate_bps,
- int delay_compensation, downmix_func downmix, opus_val32 *subframe_mem)
+ int delay_compensation, downmix_func downmix
+#ifndef DISABLE_FLOAT_API
+ , float *subframe_mem
+#endif
+ )
{
#ifndef DISABLE_FLOAT_API
if (variable_duration == OPUS_FRAMESIZE_VARIABLE && frame_size >= Fs/200)
@@ -1095,7 +1063,7 @@
max_rate = frame_rate*max_data_bytes*8;
/* Equivalent 20-ms rate for mode/channel/bandwidth decisions */
- equiv_rate = st->bitrate_bps - 60*(st->Fs/frame_size - 50);
+ equiv_rate = st->bitrate_bps - (40*st->channels+20)*(st->Fs/frame_size - 50);
if (st->signal_type == OPUS_SIGNAL_VOICE)
voice_est = 127;
@@ -1136,6 +1104,7 @@
}
#endif
}
+ equiv_rate = st->bitrate_bps - (40*st->stream_channels+20)*(st->Fs/frame_size - 50);
/* Mode selection depending on application and signal type */
if (st->application == OPUS_APPLICATION_RESTRICTED_LOWDELAY)
@@ -1195,6 +1164,11 @@
/* Override the chosen mode to make sure we meet the requested frame size */
if (st->mode != MODE_CELT_ONLY && frame_size < st->Fs/100)
st->mode = MODE_CELT_ONLY;
+ if (st->lfe)
+ st->mode = MODE_CELT_ONLY;
+ /* If max_data_bytes represents less than 8 kb/s, switch to CELT-only mode */
+ if (max_data_bytes < (frame_rate > 50 ? 12000 : 8000)*frame_size / (st->Fs * 8))
+ st->mode = MODE_CELT_ONLY;
if (st->stream_channels == 1 && st->prev_channels ==2 && st->silk_mode.toMono==0
&& st->mode != MODE_CELT_ONLY && st->prev_mode != MODE_CELT_ONLY)
@@ -1245,7 +1219,7 @@
if (st->mode != MODE_CELT_ONLY && st->prev_mode == MODE_CELT_ONLY)
{
silk_EncControlStruct dummy;
- silk_InitEncoder( silk_enc, &dummy);
+ silk_InitEncoder( silk_enc, st->arch, &dummy);
prefill=1;
}
@@ -1323,7 +1297,7 @@
st->bandwidth = OPUS_BANDWIDTH_MEDIUMBAND;
if (st->Fs <= 8000 && st->bandwidth > OPUS_BANDWIDTH_NARROWBAND)
st->bandwidth = OPUS_BANDWIDTH_NARROWBAND;
-#ifndef FIXED_POINT
+#ifndef DISABLE_FLOAT_API
/* Use detected bandwidth to reduce the encoded bandwidth. */
if (st->detected_bandwidth && st->user_bandwidth == OPUS_AUTO)
{
@@ -1332,13 +1306,13 @@
gets it wrong when we could have coded a high bandwidth transparently.
When operating in SILK/hybrid mode, we don't go below wideband to avoid
more complicated switches that require redundancy. */
- if (st->bitrate_bps <= 18000*st->stream_channels && st->mode == MODE_CELT_ONLY)
+ if (equiv_rate <= 18000*st->stream_channels && st->mode == MODE_CELT_ONLY)
min_detected_bandwidth = OPUS_BANDWIDTH_NARROWBAND;
- else if (st->bitrate_bps <= 24000*st->stream_channels && st->mode == MODE_CELT_ONLY)
+ else if (equiv_rate <= 24000*st->stream_channels && st->mode == MODE_CELT_ONLY)
min_detected_bandwidth = OPUS_BANDWIDTH_MEDIUMBAND;
- else if (st->bitrate_bps <= 30000*st->stream_channels)
+ else if (equiv_rate <= 30000*st->stream_channels)
min_detected_bandwidth = OPUS_BANDWIDTH_WIDEBAND;
- else if (st->bitrate_bps <= 44000*st->stream_channels)
+ else if (equiv_rate <= 44000*st->stream_channels)
min_detected_bandwidth = OPUS_BANDWIDTH_SUPERWIDEBAND;
else
min_detected_bandwidth = OPUS_BANDWIDTH_FULLBAND;
@@ -1349,18 +1323,11 @@
#endif
celt_encoder_ctl(celt_enc, OPUS_SET_LSB_DEPTH(lsb_depth));
- /* If max_data_bytes represents less than 8 kb/s, switch to CELT-only mode */
- if (max_data_bytes < (frame_rate > 50 ? 12000 : 8000)*frame_size / (st->Fs * 8))
- st->mode = MODE_CELT_ONLY;
-
/* CELT mode doesn't support mediumband, use wideband instead */
if (st->mode == MODE_CELT_ONLY && st->bandwidth == OPUS_BANDWIDTH_MEDIUMBAND)
st->bandwidth = OPUS_BANDWIDTH_WIDEBAND;
if (st->lfe)
- {
st->bandwidth = OPUS_BANDWIDTH_NARROWBAND;
- st->mode = MODE_CELT_ONLY;
- }
/* Can't support higher than wideband for >20 ms frames */
if (frame_size > st->Fs/50 && (st->mode == MODE_CELT_ONLY || st->bandwidth > OPUS_BANDWIDTH_WIDEBAND))
@@ -1370,12 +1337,15 @@
int bak_mode, bak_bandwidth, bak_channels, bak_to_mono;
VARDECL(OpusRepacketizer, rp);
opus_int32 bytes_per_frame;
+ opus_int32 repacketize_len;
+#ifndef DISABLE_FLOAT_API
if (analysis_read_pos_bak!= -1)
{
st->analysis.read_pos = analysis_read_pos_bak;
st->analysis.read_subframe = analysis_read_subframe_bak;
}
+#endif
nb_frames = frame_size > st->Fs/25 ? 3 : 2;
bytes_per_frame = IMIN(1276,(out_data_bytes-3)/nb_frames);
@@ -1420,7 +1390,11 @@
return OPUS_INTERNAL_ERROR;
}
}
- ret = opus_repacketizer_out(rp, data, out_data_bytes);
+ if (st->use_vbr)
+ repacketize_len = out_data_bytes;
+ else
+ repacketize_len = IMIN(3*st->bitrate_bps/(3*8*50/nb_frames), out_data_bytes);
+ ret = opus_repacketizer_out_range_impl(rp, 0, nb_frames, data, repacketize_len, 0, !st->use_vbr);
if (ret<0)
{
RESTORE_STACK;
@@ -1502,11 +1476,14 @@
if( st->silk_mode.bitRate > total_bitRate * 4/5 ) {
st->silk_mode.bitRate = total_bitRate * 4/5;
}
- /* Increasingly attenuate high band when it gets allocated fewer bits */
- celt_rate = total_bitRate - st->silk_mode.bitRate;
- HB_gain_ref = (curr_bandwidth == OPUS_BANDWIDTH_SUPERWIDEBAND) ? 3000 : 3600;
- HB_gain = SHL32((opus_val32)celt_rate, 9) / SHR32((opus_val32)celt_rate + st->stream_channels * HB_gain_ref, 6);
- HB_gain = HB_gain < Q15ONE*6/7 ? HB_gain + Q15ONE/7 : Q15ONE;
+ if (!st->energy_masking)
+ {
+ /* Increasingly attenuate high band when it gets allocated fewer bits */
+ celt_rate = total_bitRate - st->silk_mode.bitRate;
+ HB_gain_ref = (curr_bandwidth == OPUS_BANDWIDTH_SUPERWIDEBAND) ? 3000 : 3600;
+ HB_gain = SHL32((opus_val32)celt_rate, 9) / SHR32((opus_val32)celt_rate + st->stream_channels * HB_gain_ref, 6);
+ HB_gain = HB_gain < Q15ONE*6/7 ? HB_gain + Q15ONE/7 : Q15ONE;
+ }
} else {
/* SILK gets all bits */
st->silk_mode.bitRate = total_bitRate;
@@ -1536,18 +1513,22 @@
{
opus_val16 mask;
mask = MAX16(MIN16(st->energy_masking[21*c+i],
- QCONST16(.25f, DB_SHIFT)), -QCONST16(2.0f, DB_SHIFT));
+ QCONST16(.5f, DB_SHIFT)), -QCONST16(2.0f, DB_SHIFT));
if (mask > 0)
mask = HALF16(mask);
mask_sum += mask;
}
}
/* Conservative rate reduction, we cut the masking in half */
- masking_depth = HALF16(mask_sum / end*st->channels);
- rate_offset = PSHR32(MULT16_16(srate, masking_depth), DB_SHIFT);
+ masking_depth = mask_sum / end*st->channels;
+ masking_depth += QCONST16(.2f, DB_SHIFT);
+ rate_offset = (opus_int32)PSHR32(MULT16_16(srate, masking_depth), DB_SHIFT);
rate_offset = MAX32(rate_offset, -2*st->silk_mode.bitRate/3);
- rate_offset += QCONST16(.4f, DB_SHIFT);
- st->silk_mode.bitRate += rate_offset;
+ /* Split the rate change between the SILK and CELT part for hybrid. */
+ if (st->bandwidth==OPUS_BANDWIDTH_SUPERWIDEBAND || st->bandwidth==OPUS_BANDWIDTH_FULLBAND)
+ st->silk_mode.bitRate += 3*rate_offset/5;
+ else
+ st->silk_mode.bitRate += rate_offset;
bytes_target += rate_offset * frame_size / (8 * st->Fs);
}
@@ -1698,9 +1679,12 @@
celt_encoder_ctl(celt_enc, OPUS_SET_BITRATE(OPUS_BITRATE_MAX));
if (st->mode != MODE_SILK_ONLY)
{
+ opus_val32 celt_pred=2;
celt_encoder_ctl(celt_enc, OPUS_SET_VBR(0));
- /* Allow prediction unless we decide to disable it later */
- celt_encoder_ctl(celt_enc, CELT_SET_PREDICTION(2));
+ /* We may still decide to disable prediction later */
+ if (st->silk_mode.reducedDependency)
+ celt_pred = 0;
+ celt_encoder_ctl(celt_enc, CELT_SET_PREDICTION(celt_pred));
if (st->mode == MODE_HYBRID)
{
@@ -1760,7 +1744,7 @@
}
st->prev_HB_gain = HB_gain;
if (st->mode != MODE_HYBRID || st->stream_channels==1)
- st->silk_mode.stereoWidth_Q14 = IMIN((1<<14),IMAX(0,st->bitrate_bps-32000));
+ st->silk_mode.stereoWidth_Q14 = IMIN((1<<14),2*IMAX(0,equiv_rate-30000));
if( !st->energy_masking && st->channels == 2 ) {
/* Apply stereo width reduction (at low bitrates) */
if( st->hybrid_stereo_width_Q14 < (1 << 14) || st->silk_mode.stereoWidth_Q14 < (1 << 14) ) {
@@ -1790,7 +1774,7 @@
int max_redundancy;
ec_enc_bit_logp(&enc, celt_to_silk, 1);
if (st->mode == MODE_HYBRID)
- max_redundancy = (max_data_bytes-1)-nb_compr_bytes-1;
+ max_redundancy = (max_data_bytes-1)-nb_compr_bytes;
else
max_redundancy = (max_data_bytes-1)-((ec_tell(&enc)+7)>>3);
/* Target the same bit-rate for redundancy as for the rest,
@@ -1933,9 +1917,10 @@
}
/* Count ToC and redundancy */
ret += 1+redundancy_bytes;
- if (!st->use_vbr && ret >= 3)
+ if (!st->use_vbr)
{
- if (pad_frame(data, ret, max_data_bytes))
+ if (opus_packet_pad(data, ret, max_data_bytes) != OPUS_OK)
+
{
RESTORE_STACK;
return OPUS_INTERNAL_ERROR;
@@ -1987,7 +1972,11 @@
delay_compensation = st->delay_compensation;
frame_size = compute_frame_size(pcm, analysis_frame_size,
st->variable_duration, st->channels, st->Fs, st->bitrate_bps,
- delay_compensation, downmix_float, st->analysis.subframe_mem);
+ delay_compensation, downmix_int
+#ifndef DISABLE_FLOAT_API
+ , st->analysis.subframe_mem
+#endif
+ );
return opus_encode_native(st, pcm, frame_size, data, out_data_bytes, 16, pcm, analysis_frame_size, 0, -2, st->channels, downmix_int);
}
@@ -2007,7 +1996,7 @@
delay_compensation = st->delay_compensation;
frame_size = compute_frame_size(pcm, analysis_frame_size,
st->variable_duration, st->channels, st->Fs, st->bitrate_bps,
- delay_compensation, downmix_float, st->analysis.subframe_mem);
+ delay_compensation, downmix_int, st->analysis.subframe_mem);
ALLOC(in, frame_size*st->channels, float);
@@ -2409,6 +2398,22 @@
*value = st->variable_duration;
}
break;
+ case OPUS_SET_PREDICTION_DISABLED_REQUEST:
+ {
+ opus_int32 value = va_arg(ap, opus_int32);
+ if (value > 1 || value < 0)
+ goto bad_arg;
+ st->silk_mode.reducedDependency = value;
+ }
+ break;
+ case OPUS_GET_PREDICTION_DISABLED_REQUEST:
+ {
+ opus_int32 *value = va_arg(ap, opus_int32*);
+ if (!value)
+ goto bad_arg;
+ *value = st->silk_mode.reducedDependency;
+ }
+ break;
case OPUS_RESET_STATE:
{
void *silk_enc;
@@ -2420,7 +2425,7 @@
((char*)&st->OPUS_ENCODER_RESET_START - (char*)st));
celt_encoder_ctl(celt_enc, OPUS_RESET_STATE);
- silk_InitEncoder( silk_enc, &dummy );
+ silk_InitEncoder( silk_enc, st->arch, &dummy );
st->stream_channels = st->channels;
st->hybrid_stereo_width_Q14 = 1 << 14;
st->prev_HB_gain = Q15ONE;
diff --git a/src/opus_multistream_decoder.c b/src/opus_multistream_decoder.c
index f3d2311..a05fa1e 100644
--- a/src/opus_multistream_decoder.c
+++ b/src/opus_multistream_decoder.c
@@ -152,6 +152,35 @@
int frame_size
);
+static int opus_multistream_packet_validate(const unsigned char *data,
+ opus_int32 len, int nb_streams, opus_int32 Fs)
+{
+ int s;
+ int count;
+ unsigned char toc;
+ opus_int16 size[48];
+ int samples=0;
+ opus_int32 packet_offset;
+
+ for (s=0;s<nb_streams;s++)
+ {
+ int tmp_samples;
+ if (len<=0)
+ return OPUS_INVALID_PACKET;
+ count = opus_packet_parse_impl(data, len, s!=nb_streams-1, &toc, NULL,
+ size, NULL, &packet_offset);
+ if (count<0)
+ return count;
+ tmp_samples = opus_packet_get_nb_samples(data, packet_offset, Fs);
+ if (s!=0 && samples != tmp_samples)
+ return OPUS_INVALID_PACKET;
+ samples = tmp_samples;
+ data += packet_offset;
+ len -= packet_offset;
+ }
+ return samples;
+}
+
static int opus_multistream_decode_native(
OpusMSDecoder *st,
const unsigned char *data,
@@ -183,9 +212,28 @@
if (len==0)
do_plc = 1;
if (len < 0)
+ {
+ RESTORE_STACK;
return OPUS_BAD_ARG;
+ }
if (!do_plc && len < 2*st->layout.nb_streams-1)
+ {
+ RESTORE_STACK;
return OPUS_INVALID_PACKET;
+ }
+ if (!do_plc)
+ {
+ int ret = opus_multistream_packet_validate(data, len, st->layout.nb_streams, Fs);
+ if (ret < 0)
+ {
+ RESTORE_STACK;
+ return ret;
+ } else if (ret > frame_size)
+ {
+ RESTORE_STACK;
+ return OPUS_BUFFER_TOO_SMALL;
+ }
+ }
for (s=0;s<st->layout.nb_streams;s++)
{
OpusDecoder *dec;
@@ -197,22 +245,12 @@
if (!do_plc && len<=0)
{
RESTORE_STACK;
- return OPUS_INVALID_PACKET;
+ return OPUS_INTERNAL_ERROR;
}
packet_offset = 0;
ret = opus_decode_native(dec, data, len, buf, frame_size, decode_fec, s!=st->layout.nb_streams-1, &packet_offset, soft_clip);
data += packet_offset;
len -= packet_offset;
- if (ret > frame_size)
- {
- RESTORE_STACK;
- return OPUS_BUFFER_TOO_SMALL;
- }
- if (s>0 && ret != frame_size)
- {
- RESTORE_STACK;
- return OPUS_INVALID_PACKET;
- }
if (ret <= 0)
{
RESTORE_STACK;
diff --git a/src/opus_multistream_encoder.c b/src/opus_multistream_encoder.c
index 900c4f4..49e2791 100644
--- a/src/opus_multistream_encoder.c
+++ b/src/opus_multistream_encoder.c
@@ -76,7 +76,7 @@
int variable_duration;
int surround;
opus_int32 bitrate_bps;
- opus_val32 subframe_mem[3];
+ float subframe_mem[3];
/* Encoder states go here */
/* then opus_val32 window_mem[channels*120]; */
/* then opus_val32 preemph_mem[channels]; */
@@ -205,7 +205,7 @@
low = SHR32(diff, DB_SHIFT-1);
frac = SHL16(diff - SHL16(low, DB_SHIFT-1), 16-DB_SHIFT);
#else
- low = floor(2*diff);
+ low = (int)floor(2*diff);
frac = 2*diff - low;
#endif
return max + diff_table[low] + MULT16_16_Q15(frac, SUB16(diff_table[low+1], diff_table[low]));
@@ -238,7 +238,7 @@
upsample = resampling_factor(rate);
frame_size = len*upsample;
- for (LM=0;LM<=celt_mode->maxLM;LM++)
+ for (LM=0;LM<celt_mode->maxLM;LM++)
if (celt_mode->shortMdctSize<<LM==frame_size)
break;
@@ -256,7 +256,7 @@
{
OPUS_COPY(in, mem+c*overlap, overlap);
(*copy_channel_in)(x, 1, pcm, channels, c, len);
- preemphasis(x, in+overlap, frame_size, 1, upsample, celt_mode->preemph, preemph_mem+c, 0);
+ celt_preemphasis(x, in+overlap, frame_size, 1, upsample, celt_mode->preemph, preemph_mem+c, 0);
clt_mdct_forward(&celt_mode->mdct, in, freq, celt_mode->window, overlap, celt_mode->maxLM-LM, 1);
if (upsample != 1)
{
@@ -613,10 +613,11 @@
stream_offset = 20000;
else
stream_offset = st->bitrate_bps/st->layout.nb_channels/2;
+ stream_offset += 60*(Fs/frame_size-50);
/* We start by giving each stream (coupled or uncoupled) the same bitrate.
This models the main saving of coupled channels over uncoupled. */
/* The LFE stream is an exception to the above and gets fewer bits. */
- lfe_offset = 3500;
+ lfe_offset = 3500 + 60*(Fs/frame_size-50);
/* Coupled streams get twice the mono rate after the first 20 kb/s. */
coupled_ratio = 512;
/* Should depend on the bitrate, for now we assume LFE gets 1/8 the bits of mono */
@@ -686,7 +687,7 @@
VARDECL(opus_val16, bandSMR);
unsigned char tmp_data[MS_FRAME_TMP];
OpusRepacketizer rp;
- opus_int32 complexity;
+ opus_int32 vbr;
const CELTMode *celt_mode;
opus_int32 bitrates[256];
opus_val16 bandLogE[42];
@@ -703,7 +704,7 @@
ptr = (char*)st + align(sizeof(OpusMSEncoder));
opus_encoder_ctl((OpusEncoder*)ptr, OPUS_GET_SAMPLE_RATE(&Fs));
- opus_encoder_ctl((OpusEncoder*)ptr, OPUS_GET_COMPLEXITY(&complexity));
+ opus_encoder_ctl((OpusEncoder*)ptr, OPUS_GET_VBR(&vbr));
opus_encoder_ctl((OpusEncoder*)ptr, CELT_GET_MODE(&celt_mode));
{
@@ -715,7 +716,11 @@
delay_compensation -= Fs/400;
frame_size = compute_frame_size(pcm, analysis_frame_size,
st->variable_duration, channels, Fs, st->bitrate_bps,
- delay_compensation, downmix, st->subframe_mem);
+ delay_compensation, downmix
+#ifndef DISABLE_FLOAT_API
+ , st->subframe_mem
+#endif
+ );
}
if (400*frame_size < Fs)
@@ -751,6 +756,9 @@
/* Compute bitrate allocation between streams (this could be a lot better) */
surround_rate_allocation(st, bitrates, frame_size);
+ if (!vbr)
+ max_data_bytes = IMIN(max_data_bytes, 3*st->bitrate_bps/(3*8*Fs/frame_size));
+
ptr = (char*)st + align(sizeof(OpusMSEncoder));
for (s=0;s<st->layout.nb_streams;s++)
{
@@ -767,11 +775,11 @@
equiv_rate = st->bitrate_bps;
if (frame_size*50 < Fs)
equiv_rate -= 60*(Fs/frame_size - 50)*st->layout.nb_channels;
- if (equiv_rate > 112000)
+ if (equiv_rate > 10000*st->layout.nb_channels)
opus_encoder_ctl(enc, OPUS_SET_BANDWIDTH(OPUS_BANDWIDTH_FULLBAND));
- else if (equiv_rate > 76000)
+ else if (equiv_rate > 7000*st->layout.nb_channels)
opus_encoder_ctl(enc, OPUS_SET_BANDWIDTH(OPUS_BANDWIDTH_SUPERWIDEBAND));
- else if (equiv_rate > 48000)
+ else if (equiv_rate > 5000*st->layout.nb_channels)
opus_encoder_ctl(enc, OPUS_SET_BANDWIDTH(OPUS_BANDWIDTH_WIDEBAND));
else
opus_encoder_ctl(enc, OPUS_SET_BANDWIDTH(OPUS_BANDWIDTH_NARROWBAND));
@@ -838,6 +846,8 @@
/* Reserve three bytes for the last stream and four for the others */
curr_max -= IMAX(0,4*(st->layout.nb_streams-s-1)-1);
curr_max = IMIN(curr_max,MS_FRAME_TMP);
+ if (!vbr && s == st->layout.nb_streams-1)
+ opus_encoder_ctl(enc, OPUS_SET_BITRATE(curr_max*(8*Fs/frame_size)));
len = opus_encode_native(enc, buf, frame_size, tmp_data, curr_max, lsb_depth,
pcm, analysis_frame_size, c1, c2, st->layout.nb_channels, downmix);
if (len<0)
@@ -849,14 +859,14 @@
while taking into account the fact that the encoder can now return
more than one frame at a time (e.g. 60 ms CELT-only) */
opus_repacketizer_cat(&rp, tmp_data, len);
- len = opus_repacketizer_out_range_impl(&rp, 0, opus_repacketizer_get_nb_frames(&rp), data, max_data_bytes-tot_size, s != st->layout.nb_streams-1);
+ len = opus_repacketizer_out_range_impl(&rp, 0, opus_repacketizer_get_nb_frames(&rp),
+ data, max_data_bytes-tot_size, s != st->layout.nb_streams-1, !vbr && s == st->layout.nb_streams-1);
data += len;
tot_size += len;
}
/*printf("\n");*/
RESTORE_STACK;
return tot_size;
-
}
#if !defined(DISABLE_FLOAT_API)
@@ -1018,6 +1028,7 @@
case OPUS_GET_SAMPLE_RATE_REQUEST:
case OPUS_GET_INBAND_FEC_REQUEST:
case OPUS_GET_FORCE_CHANNELS_REQUEST:
+ case OPUS_GET_PREDICTION_DISABLED_REQUEST:
{
OpusEncoder *enc;
/* For int32* GET params, just query the first stream */
@@ -1063,6 +1074,7 @@
case OPUS_SET_DTX_REQUEST:
case OPUS_SET_FORCE_MODE_REQUEST:
case OPUS_SET_FORCE_CHANNELS_REQUEST:
+ case OPUS_SET_PREDICTION_DISABLED_REQUEST:
{
int s;
/* This works for int32 params */
@@ -1121,6 +1133,29 @@
*value = st->variable_duration;
}
break;
+ case OPUS_RESET_STATE:
+ {
+ int s;
+ st->subframe_mem[0] = st->subframe_mem[1] = st->subframe_mem[2] = 0;
+ if (st->surround)
+ {
+ OPUS_CLEAR(ms_get_preemph_mem(st), st->layout.nb_channels);
+ OPUS_CLEAR(ms_get_window_mem(st), st->layout.nb_channels*120);
+ }
+ for (s=0;s<st->layout.nb_streams;s++)
+ {
+ OpusEncoder *enc;
+ enc = (OpusEncoder*)ptr;
+ if (s < st->layout.nb_coupled_streams)
+ ptr += align(coupled_size);
+ else
+ ptr += align(mono_size);
+ ret = opus_encoder_ctl(enc, OPUS_RESET_STATE);
+ if (ret != OPUS_OK)
+ break;
+ }
+ }
+ break;
default:
ret = OPUS_UNIMPLEMENTED;
break;
diff --git a/src/opus_private.h b/src/opus_private.h
index 0e739eb..83225f2 100644
--- a/src/opus_private.h
+++ b/src/opus_private.h
@@ -87,7 +87,7 @@
void downmix_int(const void *_x, opus_val32 *sub, int subframe, int offset, int c1, int c2, int C);
int optimize_framesize(const opus_val16 *x, int len, int C, opus_int32 Fs,
- int bitrate, opus_val16 tonality, opus_val32 *mem, int buffering,
+ int bitrate, opus_val16 tonality, float *mem, int buffering,
downmix_func downmix);
int encode_size(int size, unsigned char *data);
@@ -96,7 +96,11 @@
opus_int32 compute_frame_size(const void *analysis_pcm, int frame_size,
int variable_duration, int C, opus_int32 Fs, int bitrate_bps,
- int delay_compensation, downmix_func downmix, opus_val32 *subframe_mem);
+ int delay_compensation, downmix_func downmix
+#ifndef DISABLE_FLOAT_API
+ , float *subframe_mem
+#endif
+ );
opus_int32 opus_encode_native(OpusEncoder *st, const opus_val16 *pcm, int frame_size,
unsigned char *data, opus_int32 out_data_bytes, int lsb_depth,
@@ -104,14 +108,22 @@
int opus_decode_native(OpusDecoder *st, const unsigned char *data, opus_int32 len,
opus_val16 *pcm, int frame_size, int decode_fec, int self_delimited,
- int *packet_offset, int soft_clip);
+ opus_int32 *packet_offset, int soft_clip);
/* Make sure everything's aligned to sizeof(void *) bytes */
-static inline int align(int i)
+static OPUS_INLINE int align(int i)
{
return (i+(int)sizeof(void *)-1)&-(int)sizeof(void *);
}
-opus_int32 opus_repacketizer_out_range_impl(OpusRepacketizer *rp, int begin, int end, unsigned char *data, opus_int32 maxlen, int self_delimited);
+int opus_packet_parse_impl(const unsigned char *data, opus_int32 len,
+ int self_delimited, unsigned char *out_toc,
+ const unsigned char *frames[48], opus_int16 size[48],
+ int *payload_offset, opus_int32 *packet_offset);
+
+opus_int32 opus_repacketizer_out_range_impl(OpusRepacketizer *rp, int begin, int end,
+ unsigned char *data, opus_int32 maxlen, int self_delimited, int pad);
+
+int pad_frame(unsigned char *data, opus_int32 len, opus_int32 new_len);
#endif /* OPUS_PRIVATE_H */
diff --git a/src/repacketizer.c b/src/repacketizer.c
index 0c5d840..a62675c 100644
--- a/src/repacketizer.c
+++ b/src/repacketizer.c
@@ -58,7 +58,7 @@
opus_free(rp);
}
-int opus_repacketizer_cat(OpusRepacketizer *rp, const unsigned char *data, opus_int32 len)
+static int opus_repacketizer_cat_impl(OpusRepacketizer *rp, const unsigned char *data, opus_int32 len, int self_delimited)
{
unsigned char tmp_toc;
int curr_nb_frames,ret;
@@ -82,24 +82,31 @@
return OPUS_INVALID_PACKET;
}
- ret=opus_packet_parse(data, len, &tmp_toc, &rp->frames[rp->nb_frames], &rp->len[rp->nb_frames], NULL);
+ ret=opus_packet_parse_impl(data, len, self_delimited, &tmp_toc, &rp->frames[rp->nb_frames], &rp->len[rp->nb_frames], NULL, NULL);
if(ret<1)return ret;
rp->nb_frames += curr_nb_frames;
return OPUS_OK;
}
+int opus_repacketizer_cat(OpusRepacketizer *rp, const unsigned char *data, opus_int32 len)
+{
+ return opus_repacketizer_cat_impl(rp, data, len, 0);
+}
+
int opus_repacketizer_get_nb_frames(OpusRepacketizer *rp)
{
return rp->nb_frames;
}
-opus_int32 opus_repacketizer_out_range_impl(OpusRepacketizer *rp, int begin, int end, unsigned char *data, opus_int32 maxlen, int self_delimited)
+opus_int32 opus_repacketizer_out_range_impl(OpusRepacketizer *rp, int begin, int end,
+ unsigned char *data, opus_int32 maxlen, int self_delimited, int pad)
{
int i, count;
opus_int32 tot_size;
opus_int16 *len;
const unsigned char **frames;
+ unsigned char * ptr;
if (begin<0 || begin>=end || end>rp->nb_frames)
{
@@ -115,18 +122,15 @@
else
tot_size = 0;
- switch (count)
- {
- case 1:
+ ptr = data;
+ if (count==1)
{
/* Code 0 */
tot_size += len[0]+1;
if (tot_size > maxlen)
return OPUS_BUFFER_TOO_SMALL;
- *data++ = rp->toc&0xFC;
- }
- break;
- case 2:
+ *ptr++ = rp->toc&0xFC;
+ } else if (count==2)
{
if (len[1] == len[0])
{
@@ -134,22 +138,28 @@
tot_size += 2*len[0]+1;
if (tot_size > maxlen)
return OPUS_BUFFER_TOO_SMALL;
- *data++ = (rp->toc&0xFC) | 0x1;
+ *ptr++ = (rp->toc&0xFC) | 0x1;
} else {
/* Code 2 */
tot_size += len[0]+len[1]+2+(len[0]>=252);
if (tot_size > maxlen)
return OPUS_BUFFER_TOO_SMALL;
- *data++ = (rp->toc&0xFC) | 0x2;
- data += encode_size(len[0], data);
+ *ptr++ = (rp->toc&0xFC) | 0x2;
+ ptr += encode_size(len[0], ptr);
}
}
- break;
- default:
+ if (count > 2 || (pad && tot_size < maxlen))
{
/* Code 3 */
int vbr;
+ int pad_amount=0;
+ /* Restart the process for the padding case */
+ ptr = data;
+ if (self_delimited)
+ tot_size = 1 + (len[count-1]>=252);
+ else
+ tot_size = 0;
vbr = 0;
for (i=1;i<count;i++)
{
@@ -168,41 +178,168 @@
if (tot_size > maxlen)
return OPUS_BUFFER_TOO_SMALL;
- *data++ = (rp->toc&0xFC) | 0x3;
- *data++ = count | 0x80;
- for (i=0;i<count-1;i++)
- data += encode_size(len[i], data);
+ *ptr++ = (rp->toc&0xFC) | 0x3;
+ *ptr++ = count | 0x80;
} else {
tot_size += count*len[0]+2;
if (tot_size > maxlen)
return OPUS_BUFFER_TOO_SMALL;
- *data++ = (rp->toc&0xFC) | 0x3;
- *data++ = count;
+ *ptr++ = (rp->toc&0xFC) | 0x3;
+ *ptr++ = count;
+ }
+ pad_amount = pad ? (maxlen-tot_size) : 0;
+ if (pad_amount != 0)
+ {
+ int nb_255s;
+ data[1] |= 0x40;
+ nb_255s = (pad_amount-1)/255;
+ for (i=0;i<nb_255s;i++)
+ *ptr++ = 255;
+ *ptr++ = pad_amount-255*nb_255s-1;
+ tot_size += pad_amount;
+ }
+ if (vbr)
+ {
+ for (i=0;i<count-1;i++)
+ ptr += encode_size(len[i], ptr);
}
}
- break;
- }
if (self_delimited) {
- int sdlen = encode_size(len[count-1], data);
- data += sdlen;
+ int sdlen = encode_size(len[count-1], ptr);
+ ptr += sdlen;
}
/* Copy the actual data */
for (i=0;i<count;i++)
{
- OPUS_COPY(data, frames[i], len[i]);
- data += len[i];
+ /* Using OPUS_MOVE() instead of OPUS_COPY() in case we're doing in-place
+ padding from opus_packet_pad or opus_packet_unpad(). */
+ celt_assert(frames[i] + len[i] <= data || ptr <= frames[i]);
+ OPUS_MOVE(ptr, frames[i], len[i]);
+ ptr += len[i];
+ }
+ if (pad)
+ {
+ for (i=ptr-data;i<maxlen;i++)
+ data[i] = 0;
}
return tot_size;
}
opus_int32 opus_repacketizer_out_range(OpusRepacketizer *rp, int begin, int end, unsigned char *data, opus_int32 maxlen)
{
- return opus_repacketizer_out_range_impl(rp, begin, end, data, maxlen, 0);
+ return opus_repacketizer_out_range_impl(rp, begin, end, data, maxlen, 0, 0);
}
opus_int32 opus_repacketizer_out(OpusRepacketizer *rp, unsigned char *data, opus_int32 maxlen)
{
- return opus_repacketizer_out_range_impl(rp, 0, rp->nb_frames, data, maxlen, 0);
+ return opus_repacketizer_out_range_impl(rp, 0, rp->nb_frames, data, maxlen, 0, 0);
}
+int opus_packet_pad(unsigned char *data, opus_int32 len, opus_int32 new_len)
+{
+ OpusRepacketizer rp;
+ opus_int32 ret;
+ if (len < 1)
+ return OPUS_BAD_ARG;
+ if (len==new_len)
+ return OPUS_OK;
+ else if (len > new_len)
+ return OPUS_BAD_ARG;
+ opus_repacketizer_init(&rp);
+ /* Moving payload to the end of the packet so we can do in-place padding */
+ OPUS_MOVE(data+new_len-len, data, len);
+ opus_repacketizer_cat(&rp, data+new_len-len, len);
+ ret = opus_repacketizer_out_range_impl(&rp, 0, rp.nb_frames, data, new_len, 0, 1);
+ if (ret > 0)
+ return OPUS_OK;
+ else
+ return ret;
+}
+
+opus_int32 opus_packet_unpad(unsigned char *data, opus_int32 len)
+{
+ OpusRepacketizer rp;
+ opus_int32 ret;
+ if (len < 1)
+ return OPUS_BAD_ARG;
+ opus_repacketizer_init(&rp);
+ ret = opus_repacketizer_cat(&rp, data, len);
+ if (ret < 0)
+ return ret;
+ ret = opus_repacketizer_out_range_impl(&rp, 0, rp.nb_frames, data, len, 0, 0);
+ celt_assert(ret > 0 && ret <= len);
+ return ret;
+}
+
+int opus_multistream_packet_pad(unsigned char *data, opus_int32 len, opus_int32 new_len, int nb_streams)
+{
+ int s;
+ int count;
+ unsigned char toc;
+ opus_int16 size[48];
+ opus_int32 packet_offset;
+ opus_int32 amount;
+
+ if (len < 1)
+ return OPUS_BAD_ARG;
+ if (len==new_len)
+ return OPUS_OK;
+ else if (len > new_len)
+ return OPUS_BAD_ARG;
+ amount = new_len - len;
+ /* Seek to last stream */
+ for (s=0;s<nb_streams-1;s++)
+ {
+ if (len<=0)
+ return OPUS_INVALID_PACKET;
+ count = opus_packet_parse_impl(data, len, 1, &toc, NULL,
+ size, NULL, &packet_offset);
+ if (count<0)
+ return count;
+ data += packet_offset;
+ len -= packet_offset;
+ }
+ return opus_packet_pad(data, len, len+amount);
+}
+
+opus_int32 opus_multistream_packet_unpad(unsigned char *data, opus_int32 len, int nb_streams)
+{
+ int s;
+ unsigned char toc;
+ opus_int16 size[48];
+ opus_int32 packet_offset;
+ OpusRepacketizer rp;
+ unsigned char *dst;
+ opus_int32 dst_len;
+
+ if (len < 1)
+ return OPUS_BAD_ARG;
+ dst = data;
+ dst_len = 0;
+ /* Unpad all frames */
+ for (s=0;s<nb_streams;s++)
+ {
+ opus_int32 ret;
+ int self_delimited = s!=nb_streams-1;
+ if (len<=0)
+ return OPUS_INVALID_PACKET;
+ opus_repacketizer_init(&rp);
+ ret = opus_packet_parse_impl(data, len, self_delimited, &toc, NULL,
+ size, NULL, &packet_offset);
+ if (ret<0)
+ return ret;
+ ret = opus_repacketizer_cat_impl(&rp, data, packet_offset, self_delimited);
+ if (ret < 0)
+ return ret;
+ ret = opus_repacketizer_out_range_impl(&rp, 0, rp.nb_frames, dst, len, self_delimited, 0);
+ if (ret < 0)
+ return ret;
+ else
+ dst_len += ret;
+ dst += ret;
+ data += packet_offset;
+ len -= packet_offset;
+ }
+ return dst_len;
+}
diff --git a/src/repacketizer_demo.c b/src/repacketizer_demo.c
index ca8b2c7..dc05c1b 100644
--- a/src/repacketizer_demo.c
+++ b/src/repacketizer_demo.c
@@ -81,6 +81,11 @@
fprintf(stderr, "-merge parameter must be at least 1.\n");
return EXIT_FAILURE;
}
+ if(merge>48)
+ {
+ fprintf(stderr, "-merge parameter must be less than 48.\n");
+ return EXIT_FAILURE;
+ }
i++;
} else if (strcmp(argv[i], "-split")==0)
split = 1;
diff --git a/tests/test_opus_api.c b/tests/test_opus_api.c
index 2b46781..bafe4e4 100644
--- a/tests/test_opus_api.c
+++ b/tests/test_opus_api.c
@@ -724,6 +724,7 @@
/*code 0*/
for(i=0;i<64;i++)
{
+ packet[0]=i<<2;
UNDEFINE_FOR_PARSE
ret=opus_packet_parse(packet,4,&toc,frames,size,&payload_offset);
cfgs++;
@@ -1351,6 +1352,16 @@
" OPUS_SET_LSB_DEPTH ........................... OK.\n",
" OPUS_GET_LSB_DEPTH ........................... OK.\n")
+ err=opus_encoder_ctl(enc,OPUS_GET_PREDICTION_DISABLED(&i));
+ if(i!=0)test_failed();
+ cfgs++;
+ err=opus_encoder_ctl(enc,OPUS_GET_PREDICTION_DISABLED((opus_int32 *)NULL));
+ if(err!=OPUS_BAD_ARG)test_failed();
+ cfgs++;
+ CHECK_SETGET(OPUS_SET_PREDICTION_DISABLED(i),OPUS_GET_PREDICTION_DISABLED(&i),-1,2,1,0,
+ " OPUS_SET_PREDICTION_DISABLED ................. OK.\n",
+ " OPUS_GET_PREDICTION_DISABLED ................. OK.\n")
+
err=opus_encoder_ctl(enc,OPUS_GET_EXPERT_FRAME_DURATION((opus_int32 *)NULL));
if(err!=OPUS_BAD_ARG)test_failed();
cfgs++;
@@ -1373,7 +1384,7 @@
if(err!=OPUS_OK)test_failed();
cfgs++;
CHECK_SETGET(OPUS_SET_EXPERT_FRAME_DURATION(i),OPUS_GET_EXPERT_FRAME_DURATION(&i),0,-1,
- OPUS_FRAMESIZE_VARIABLE,OPUS_FRAMESIZE_ARG,
+ OPUS_FRAMESIZE_60_MS,OPUS_FRAMESIZE_ARG,
" OPUS_SET_EXPERT_FRAME_DURATION ............... OK.\n",
" OPUS_GET_EXPERT_FRAME_DURATION ............... OK.\n")
@@ -1435,9 +1446,9 @@
packet=malloc(max_out);
if(packet==NULL)test_failed();
- po=malloc(max_out);
- if(po==NULL)test_failed();
memset(packet,0,max_out);
+ po=malloc(max_out+256);
+ if(po==NULL)test_failed();
i=opus_repacketizer_get_size();
if(i<=0)test_failed();
@@ -1539,6 +1550,22 @@
cfgs++;
if(opus_repacketizer_out(rp,po,len)!=len)test_failed();
cfgs++;
+ if(opus_packet_unpad(po,len)!=len)test_failed();
+ cfgs++;
+ if(opus_packet_pad(po,len,len+1)!=OPUS_OK)test_failed();
+ cfgs++;
+ if(opus_packet_pad(po,len+1,len+256)!=OPUS_OK)test_failed();
+ cfgs++;
+ if(opus_packet_unpad(po,len+256)!=len)test_failed();
+ cfgs++;
+ if(opus_multistream_packet_unpad(po,len,1)!=len)test_failed();
+ cfgs++;
+ if(opus_multistream_packet_pad(po,len,len+1,1)!=OPUS_OK)test_failed();
+ cfgs++;
+ if(opus_multistream_packet_pad(po,len+1,len+256,1)!=OPUS_OK)test_failed();
+ cfgs++;
+ if(opus_multistream_packet_unpad(po,len+256,1)!=len)test_failed();
+ cfgs++;
if(opus_repacketizer_out(rp,po,len-1)!=OPUS_BUFFER_TOO_SMALL)test_failed();
cfgs++;
if(len>1)
@@ -1638,6 +1665,22 @@
cfgs++;
if(opus_repacketizer_out(rp,po,len)!=len)test_failed();
cfgs++;
+ if(opus_packet_unpad(po,len)!=len)test_failed();
+ cfgs++;
+ if(opus_packet_pad(po,len,len+1)!=OPUS_OK)test_failed();
+ cfgs++;
+ if(opus_packet_pad(po,len+1,len+256)!=OPUS_OK)test_failed();
+ cfgs++;
+ if(opus_packet_unpad(po,len+256)!=len)test_failed();
+ cfgs++;
+ if(opus_multistream_packet_unpad(po,len,1)!=len)test_failed();
+ cfgs++;
+ if(opus_multistream_packet_pad(po,len,len+1,1)!=OPUS_OK)test_failed();
+ cfgs++;
+ if(opus_multistream_packet_pad(po,len+1,len+256,1)!=OPUS_OK)test_failed();
+ cfgs++;
+ if(opus_multistream_packet_unpad(po,len+256,1)!=len)test_failed();
+ cfgs++;
if(opus_repacketizer_out(rp,po,len-1)!=OPUS_BUFFER_TOO_SMALL)test_failed();
cfgs++;
if(len>1)
@@ -1650,9 +1693,43 @@
}
}
+ po[0]='O';
+ po[1]='p';
+ if(opus_packet_pad(po,4,4)!=OPUS_OK)test_failed();
+ cfgs++;
+ if(opus_multistream_packet_pad(po,4,4,1)!=OPUS_OK)test_failed();
+ cfgs++;
+ if(opus_packet_pad(po,4,5)!=OPUS_BAD_ARG)test_failed();
+ cfgs++;
+ if(opus_multistream_packet_pad(po,4,5,1)!=OPUS_BAD_ARG)test_failed();
+ cfgs++;
+ if(opus_packet_pad(po,0,5)!=OPUS_BAD_ARG)test_failed();
+ cfgs++;
+ if(opus_multistream_packet_pad(po,0,5,1)!=OPUS_BAD_ARG)test_failed();
+ cfgs++;
+ if(opus_packet_unpad(po,0)!=OPUS_BAD_ARG)test_failed();
+ cfgs++;
+ if(opus_multistream_packet_unpad(po,0,1)!=OPUS_BAD_ARG)test_failed();
+ cfgs++;
+ if(opus_packet_unpad(po,4)!=OPUS_INVALID_PACKET)test_failed();
+ cfgs++;
+ if(opus_multistream_packet_unpad(po,4,1)!=OPUS_INVALID_PACKET)test_failed();
+ cfgs++;
+ po[0]=0;
+ po[1]=0;
+ po[2]=0;
+ if(opus_packet_pad(po,5,4)!=OPUS_BAD_ARG)test_failed();
+ cfgs++;
+ if(opus_multistream_packet_pad(po,5,4,1)!=OPUS_BAD_ARG)test_failed();
+ cfgs++;
+
fprintf(stdout," opus_repacketizer_cat ........................ OK.\n");
fprintf(stdout," opus_repacketizer_out ........................ OK.\n");
fprintf(stdout," opus_repacketizer_out_range .................. OK.\n");
+ fprintf(stdout," opus_packet_pad .............................. OK.\n");
+ fprintf(stdout," opus_packet_unpad ............................ OK.\n");
+ fprintf(stdout," opus_multistream_packet_pad .................. OK.\n");
+ fprintf(stdout," opus_multistream_packet_unpad ................ OK.\n");
opus_repacketizer_destroy(rp);
cfgs++;
diff --git a/tests/test_opus_common.h b/tests/test_opus_common.h
index d1e6b45..66b9690 100644
--- a/tests/test_opus_common.h
+++ b/tests/test_opus_common.h
@@ -25,7 +25,7 @@
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-static inline void deb2_impl(unsigned char *_t,unsigned char **_p,int _k,int _x,int _y)
+static OPUS_INLINE void deb2_impl(unsigned char *_t,unsigned char **_p,int _k,int _x,int _y)
{
int i;
if(_x>2){
@@ -41,7 +41,7 @@
}
/*Generates a De Bruijn sequence (k,2) with length k^2*/
-static inline void debruijn2(int _k, unsigned char *_res)
+static OPUS_INLINE void debruijn2(int _k, unsigned char *_res)
{
unsigned char *p;
unsigned char *t;
@@ -54,7 +54,7 @@
/*MWC RNG of George Marsaglia*/
static opus_uint32 Rz, Rw;
-static inline opus_uint32 fast_rand(void)
+static OPUS_INLINE opus_uint32 fast_rand(void)
{
Rz=36969*(Rz&65535)+(Rz>>16);
Rw=18000*(Rw&65535)+(Rw>>16);
@@ -65,7 +65,7 @@
#ifdef __GNUC__
__attribute__((noreturn))
#endif
-static inline void _test_failed(const char *file, int line)
+static OPUS_INLINE void _test_failed(const char *file, int line)
{
fprintf(stderr,"\n ***************************************************\n");
fprintf(stderr," *** A fatal error was detected. ***\n");
diff --git a/tests/test_opus_decode.c b/tests/test_opus_decode.c
index 44a0ae5..9c0eb9c 100644
--- a/tests/test_opus_decode.c
+++ b/tests/test_opus_decode.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2011 Xiph.Org Foundation
+/* Copyright (c) 2011-2013 Xiph.Org Foundation
Written by Gregory Maxwell */
/*
Redistribution and use in source and binary forms, with or without
@@ -373,6 +373,49 @@
return 0;
}
+#ifndef DISABLE_FLOAT_API
+void test_soft_clip(void)
+{
+ int i,j;
+ float x[1024];
+ float s[8] = {0, 0, 0, 0, 0, 0, 0, 0};
+ fprintf(stdout," Testing opus_pcm_soft_clip... ");
+ for(i=0;i<1024;i++)
+ {
+ for (j=0;j<1024;j++)
+ {
+ x[j]=(i&255)*(1/32.f)-4.f;
+ }
+ opus_pcm_soft_clip(&x[i],1024-i,1,s);
+ for (j=i;j<1024;j++)
+ {
+ if(x[i]>1.f)test_failed();
+ if(x[i]<-1.f)test_failed();
+ }
+ }
+ for(i=1;i<9;i++)
+ {
+ for (j=0;j<1024;j++)
+ {
+ x[j]=(i&255)*(1/32.f)-4.f;
+ }
+ opus_pcm_soft_clip(x,1024/i,i,s);
+ for (j=0;j<(1024/i)*i;j++)
+ {
+ if(x[i]>1.f)test_failed();
+ if(x[i]<-1.f)test_failed();
+ }
+ }
+ opus_pcm_soft_clip(x,0,1,s);
+ opus_pcm_soft_clip(x,1,0,s);
+ opus_pcm_soft_clip(x,1,1,0);
+ opus_pcm_soft_clip(x,1,-1,s);
+ opus_pcm_soft_clip(x,-1,1,s);
+ opus_pcm_soft_clip(0,1,1,s);
+ printf("OK.\n");
+}
+#endif
+
int main(int _argc, char **_argv)
{
const char * oversion;
@@ -405,6 +448,9 @@
into the decoders. This is helpful because garbage data
may cause the decoders to clip, which angers CLANG IOC.*/
test_decoder_code0(getenv("TEST_OPUS_NOFUZZ")!=NULL);
+#ifndef DISABLE_FLOAT_API
+ test_soft_clip();
+#endif
return 0;
}
diff --git a/tests/test_opus_encode.c b/tests/test_opus_encode.c
index 29c47d9..132d074 100644
--- a/tests/test_opus_encode.c
+++ b/tests/test_opus_encode.c
@@ -93,7 +93,7 @@
ch[3] = i&0xFF;
}
-static inline void save_packet(unsigned char* p, int len, opus_uint32 rng)
+static OPUS_INLINE void save_packet(unsigned char* p, int len, opus_uint32 rng)
{
FILE *fout;
unsigned char int_field[4];
@@ -130,7 +130,7 @@
short *outbuf;
short *out2buf;
opus_int32 bitrate_bps;
- unsigned char packet[MAX_PACKET];
+ unsigned char packet[MAX_PACKET+257];
opus_uint32 enc_final_range;
opus_uint32 dec_final_range;
int fswitch;
@@ -247,7 +247,19 @@
do {
int bw,len,out_samples,frame_size;
frame_size=frame[j];
- if(fast_rand()%100==0)opus_encoder_ctl(enc, OPUS_RESET_STATE);
+ if((fast_rand()&255)==0)
+ {
+ if(opus_encoder_ctl(enc, OPUS_RESET_STATE)!=OPUS_OK)test_failed();
+ if(opus_decoder_ctl(dec, OPUS_RESET_STATE)!=OPUS_OK)test_failed();
+ if((fast_rand()&1)!=0)
+ {
+ if(opus_decoder_ctl(dec_err[fast_rand()&1], OPUS_RESET_STATE)!=OPUS_OK)test_failed();
+ }
+ }
+ if((fast_rand()&127)==0)
+ {
+ if(opus_decoder_ctl(dec_err[fast_rand()&1], OPUS_RESET_STATE)!=OPUS_OK)test_failed();
+ }
if(fast_rand()%10==0){
int complex=fast_rand()%11;
if(opus_encoder_ctl(enc, OPUS_SET_COMPLEXITY(complex))!=OPUS_OK)test_failed();
@@ -268,6 +280,21 @@
len = opus_encode(enc, &inbuf[i<<1], frame_size, packet, MAX_PACKET);
if(len<0 || len>MAX_PACKET)test_failed();
if(opus_encoder_ctl(enc, OPUS_GET_FINAL_RANGE(&enc_final_range))!=OPUS_OK)test_failed();
+ if((fast_rand()&3)==0)
+ {
+ if(opus_packet_pad(packet,len,len+1)!=OPUS_OK)test_failed();
+ len++;
+ }
+ if((fast_rand()&7)==0)
+ {
+ if(opus_packet_pad(packet,len,len+256)!=OPUS_OK)test_failed();
+ len+=256;
+ }
+ if((fast_rand()&3)==0)
+ {
+ len=opus_packet_unpad(packet,len);
+ if(len<1)test_failed();
+ }
out_samples = opus_decode(dec, packet, len, &outbuf[i<<1], MAX_FRAME_SAMP, 0);
if(out_samples!=frame_size)test_failed();
if(opus_decoder_ctl(dec, OPUS_GET_FINAL_RANGE(&dec_final_range))!=OPUS_OK)test_failed();
@@ -308,13 +335,43 @@
if(opus_multistream_encoder_ctl(MSenc, OPUS_SET_BITRATE(rate))!=OPUS_OK)test_failed();
count=i=0;
do {
- int len,out_samples,frame_size,loss;
+ int pred,len,out_samples,frame_size,loss;
+ if(opus_multistream_encoder_ctl(MSenc, OPUS_GET_PREDICTION_DISABLED(&pred))!=OPUS_OK)test_failed();
+ if(opus_multistream_encoder_ctl(MSenc, OPUS_SET_PREDICTION_DISABLED((int)(fast_rand()&15)<(pred?11:4)))!=OPUS_OK)test_failed();
frame_size=frame[j];
if(opus_multistream_encoder_ctl(MSenc, OPUS_SET_COMPLEXITY((count>>2)%11))!=OPUS_OK)test_failed();
if(opus_multistream_encoder_ctl(MSenc, OPUS_SET_PACKET_LOSS_PERC((fast_rand()&15)&(fast_rand()%15)))!=OPUS_OK)test_failed();
+ if((fast_rand()&255)==0)
+ {
+ if(opus_multistream_encoder_ctl(MSenc, OPUS_RESET_STATE)!=OPUS_OK)test_failed();
+ if(opus_multistream_decoder_ctl(MSdec, OPUS_RESET_STATE)!=OPUS_OK)test_failed();
+ if((fast_rand()&3)!=0)
+ {
+ if(opus_multistream_decoder_ctl(MSdec_err, OPUS_RESET_STATE)!=OPUS_OK)test_failed();
+ }
+ }
+ if((fast_rand()&255)==0)
+ {
+ if(opus_multistream_decoder_ctl(MSdec_err, OPUS_RESET_STATE)!=OPUS_OK)test_failed();
+ }
len = opus_multistream_encode(MSenc, &inbuf[i<<1], frame_size, packet, MAX_PACKET);
if(len<0 || len>MAX_PACKET)test_failed();
if(opus_multistream_encoder_ctl(MSenc, OPUS_GET_FINAL_RANGE(&enc_final_range))!=OPUS_OK)test_failed();
+ if((fast_rand()&3)==0)
+ {
+ if(opus_multistream_packet_pad(packet,len,len+1,2)!=OPUS_OK)test_failed();
+ len++;
+ }
+ if((fast_rand()&7)==0)
+ {
+ if(opus_multistream_packet_pad(packet,len,len+256,2)!=OPUS_OK)test_failed();
+ len+=256;
+ }
+ if((fast_rand()&3)==0)
+ {
+ len=opus_multistream_packet_unpad(packet,len,2);
+ if(len<1)test_failed();
+ }
out_samples = opus_multistream_decode(MSdec, packet, len, out2buf, MAX_FRAME_SAMP, 0);
if(out_samples!=frame_size*6)test_failed();
if(opus_multistream_decoder_ctl(MSdec, OPUS_GET_FINAL_RANGE(&dec_final_range))!=OPUS_OK)test_failed();
@@ -397,9 +454,13 @@
}while(i<SAMPLES*4);
fprintf(stdout," All framesize pairs switching encode, %d frames OK.\n",count);
+ if(opus_encoder_ctl(enc, OPUS_RESET_STATE)!=OPUS_OK)test_failed();
opus_encoder_destroy(enc);
+ if(opus_multistream_encoder_ctl(MSenc, OPUS_RESET_STATE)!=OPUS_OK)test_failed();
opus_multistream_encoder_destroy(MSenc);
+ if(opus_decoder_ctl(dec, OPUS_RESET_STATE)!=OPUS_OK)test_failed();
opus_decoder_destroy(dec);
+ if(opus_multistream_decoder_ctl(MSdec, OPUS_RESET_STATE)!=OPUS_OK)test_failed();
opus_multistream_decoder_destroy(MSdec);
opus_multistream_decoder_destroy(MSdec_err);
for(i=0;i<10;i++)opus_decoder_destroy(dec_err[i]);
diff --git a/tests/test_opus_padding.c b/tests/test_opus_padding.c
new file mode 100644
index 0000000..c22e8f0
--- /dev/null
+++ b/tests/test_opus_padding.c
@@ -0,0 +1,93 @@
+/* Copyright (c) 2012 Xiph.Org Foundation
+ Written by Jüri Aedla and Ralph Giles */
+/*
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ - Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+
+ - Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
+ OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+/* Check for overflow in reading the padding length.
+ * http://lists.xiph.org/pipermail/opus/2012-November/001834.html
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "opus.h"
+#include "test_opus_common.h"
+
+#define PACKETSIZE 16909318
+#define CHANNELS 2
+#define FRAMESIZE 5760
+
+int test_overflow(void)
+{
+ OpusDecoder *decoder;
+ int result;
+ int error;
+
+ unsigned char *in = malloc(PACKETSIZE);
+ opus_int16 *out = malloc(FRAMESIZE*CHANNELS*sizeof(*out));
+
+ fprintf(stderr, " Checking for padding overflow... ");
+ if (!in || !out) {
+ fprintf(stderr, "FAIL (out of memory)\n");
+ return -1;
+ }
+ in[0] = 0xff;
+ in[1] = 0x41;
+ memset(in + 2, 0xff, PACKETSIZE - 3);
+ in[PACKETSIZE-1] = 0x0b;
+
+ decoder = opus_decoder_create(48000, CHANNELS, &error);
+ result = opus_decode(decoder, in, PACKETSIZE, out, FRAMESIZE, 0);
+ opus_decoder_destroy(decoder);
+
+ free(in);
+ free(out);
+
+ if (result != OPUS_INVALID_PACKET) {
+ fprintf(stderr, "FAIL!\n");
+ test_failed();
+ }
+
+ fprintf(stderr, "OK.\n");
+
+ return 1;
+}
+
+int main(void)
+{
+ const char *oversion;
+ int tests = 0;;
+
+ iseed = 0;
+ oversion = opus_get_version_string();
+ if (!oversion) test_failed();
+ fprintf(stderr, "Testing %s padding.\n", oversion);
+
+ tests += test_overflow();
+
+ fprintf(stderr, "All padding tests passed.\n");
+
+ return 0;
+}
diff --git a/win32/config.h b/win32/config.h
index 6cf0cad..46ff699 100644
--- a/win32/config.h
+++ b/win32/config.h
@@ -28,8 +28,6 @@
#ifndef CONFIG_H
#define CONFIG_H
-#define inline __inline
-
#define USE_ALLOCA 1
/* Comment out the next line for floating-point code */
diff --git a/win32/genversion.bat b/win32/genversion.bat
index 7934ebf..a9b9353 100644
--- a/win32/genversion.bat
+++ b/win32/genversion.bat
@@ -2,7 +2,7 @@
setlocal enableextensions enabledelayedexpansion
-for /f %%v in ('git describe --tags --match "v*"') do set version=%%v
+for /f %%v in ('git --git-dir="%~dp0..\.git" describe --tags --match "v*"') do set version=%%v
if not "%version%"=="" goto :gotversion
@@ -16,7 +16,7 @@
:getversion
-for /f "delims== tokens=2" %%v in (%~dp0..\version.mk) do set version=%%v
+for /f "delims== tokens=2" %%v in (%~dps0..\version.mk) do set version=%%v
set version=!version:^"=!
set version=!version: =!
@@ -26,7 +26,7 @@
set version_out=#define %2 "%version%"
set version_mk=%2 = "%version%"
-echo %version_out%> %1_temp
+echo %version_out%> "%1_temp"
if %version%==unknown goto :skipgenerate
@@ -35,12 +35,12 @@
:skipgenerate
-echo n | comp %1_temp %1 > NUL 2> NUL
+echo n | comp "%1_temp" "%1" > NUL 2> NUL
if not errorlevel 1 goto exit
-copy /y %1_temp %1
+copy /y "%1_temp" "%1"
:exit
-del %1_temp
+del "%1_temp"
