/* Microsoft Reference Implementation for TPM 2.0
 *
 *  The copyright in this software is being made available under the BSD License,
 *  included below. This software may be subject to other third party and
 *  contributor rights, including patent rights, and no such rights are granted
 *  under this license.
 *
 *  Copyright (c) Microsoft Corporation
 *
 *  All rights reserved.
 *
 *  BSD License
 *
 *  Redistribution and use in source and binary forms, with or without modification,
 *  are permitted provided that the following conditions are met:
 *
 *  Redistributions of source code must retain the above copyright notice, this list
 *  of conditions and the following disclaimer.
 *
 *  Redistributions in binary form must reproduce the above copyright notice, this
 *  list of conditions and the following disclaimer in the documentation and/or
 *  other materials provided with the distribution.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ""AS IS""
 *  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 *  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 *  ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 *  (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 *  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 *  ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
//** Introduction

// The NV memory is divided into two areas: dynamic space for user defined NV
// indexes and evict objects, and reserved space for TPM persistent and state save
// data.
//
// The entries in dynamic space are a linked list of entries. Each entry has, as its
// first field, a size. If the size field is zero, it marks the end of the
// list.
//
// An Index allocation will contain an NV_INDEX structure. If the Index does not
// have the orderly attribute, the NV_INDEX is followed immediately by the NV data.
//
// An evict object entry contains a handle followed by an OBJECT structure. This
// results in both the Index and Evict Object having an identifying handle as the
// first field following the size field.
//
// When an Index has the orderly attribute, the data is kept in RAM. This RAM is
// saved to backing store in NV memory on any orderly shutdown. The entries in
// orderly memory are also a linked list using a size field as the first entry.
//
// The attributes of an orderly index are maintained in RAM memory in order to
// reduce the number of NV writes needed for orderly data. When an orderly index
// is created, an entry is made in the dynamic NV memory space that holds the Index
// authorizations (authPolicy and authValue) and the size of the data. This entry is
// only modified if the authValue  of the index is changed. The more volatile data
// of the index is kept in RAM. When an orderly Index is created or deleted, the
// RAM data is copied to NV backing store so that the image in the backing store
// matches the layout of RAM. In normal operation. The RAM data is also copied on
// any orderly shutdown. In normal operation, the only other reason for writing
// to the backing store for RAM is when a counter is first written (TPMA_NV_WRITTEN
// changes from CLEAR to SET) or when a counter ""rolls over"".
//
// Static space contains items that are individually modifiable. The values are in
// the 'gp' PERSISTENT_DATA structure in RAM and mapped to locations in NV.
//

//** Includes, Defines and Data Definitions
#define NV_C
#include "Tpm.h"

//** Local Functions


//*** NvNext()
//  This function provides a method to traverse every data entry in NV dynamic
//  area.
//
//  To begin with, parameter 'iter' should be initialized to NV_REF_INIT
//  indicating the first element.  Every time this function is called, the
//  value in 'iter' would be adjusted pointing to the next element in
//  traversal.  If there is no next element, 'iter' value would be 0.
//  This function returns the address of the 'data entry' pointed by the
//  'iter'.  If there are no more elements in the set, a 0 value is returned
//  indicating the end of traversal.
//
static NV_REF
NvNext(
    NV_REF          *iter,          // IN/OUT: the list iterator
    TPM_HANDLE      *handle         // OUT: the handle of the next item.
    )
{
    NV_REF               currentAddr;
    NV_ENTRY_HEADER      header;
//
    // If iterator is at the beginning of list
    if(*iter == NV_REF_INIT)
    {
        // Initialize iterator
        *iter = NV_USER_DYNAMIC;
    }
    // Step over the size field and point to the handle
    currentAddr = *iter + sizeof(UINT32);

    // read the header of the next entry
    NvRead(&header, *iter, sizeof(NV_ENTRY_HEADER));

    // if the size field is zero, then we have hit the end of the list
    if(header.size == 0)
        // leave the *iter pointing at the end of the list
        return 0;
    // advance the header by the size of the entry
    *iter += header.size;

    if(handle != NULL)
        *handle = header.handle;
    return currentAddr;
}


//*** NvNextByType()
// This function returns a reference to the next NV entry of the desired type
//  Return Type: NV_REF
//      0               end of list
//      != 0            the next entry of the indicated type
static NV_REF
NvNextByType(
    TPM_HANDLE      *handle,        // OUT: the handle of the found type or 0 
    NV_REF          *iter,          // IN: the iterator
    TPM_HT           type           // IN: the handle type to look for
    )
{
    NV_REF           addr;
    TPM_HANDLE       nvHandle = 0;
//
    while((addr = NvNext(iter, &nvHandle)) != 0)
    {
        // addr: the address of the location containing the handle of the value
        // iter: the next location.
        if(HandleGetType(nvHandle) == type)
            break;
    }
    if(handle != NULL)
        *handle = nvHandle;
    return addr;
}

//*** NvNextIndex()
// This function returns the reference to the next NV Index entry.  A value
// of 0 indicates the end of the list.
//  Return Type: NV_REF
//      0               end of list
//      != 0            the next reference
#define NvNextIndex(handle, iter)                   \
    NvNextByType(handle, iter, TPM_HT_NV_INDEX)

//*** NvNextEvict()
// This function returns the offset in NV of the next evict object entry.  A value
// of 0 indicates the end of the list.
#define NvNextEvict(handle, iter)                   \
    NvNextByType(handle, iter, TPM_HT_PERSISTENT)

//*** NvGetEnd()
// Function to find the end of the NV dynamic data list
static NV_REF
NvGetEnd(
    void
    )
{
    NV_REF          iter = NV_REF_INIT;
    NV_REF          currentAddr;
//
    // Scan until the next address is 0
    while((currentAddr = NvNext(&iter, NULL)) != 0);
    return iter;
}

//*** NvGetFreeBytes
// This function returns the number of free octets in NV space.
static UINT32
NvGetFreeBytes(
    void
    )
{
    // This does not have an overflow issue because NvGetEnd() cannot return a value
    // that is larger than s_evictNvEnd. This is because there is always a 'stop'
    // word in the NV memory that terminates the search for the end before the
    // value can go past s_evictNvEnd.
    return s_evictNvEnd - NvGetEnd();
}

//*** NvTestSpace()
// This function will test if there is enough space to add a new entity.
//  Return Type: BOOL
//      TRUE(1)         space available
//      FALSE(0)        no enough space
static BOOL
NvTestSpace(
    UINT32           size,          // IN: size of the entity to be added
    BOOL             isIndex,       // IN: TRUE if the entity is an index
    BOOL             isCounter      // IN: TRUE if the index is a counter
    )
{
    UINT32      remainBytes = NvGetFreeBytes();
    UINT32      reserved = sizeof(UINT32)       // size of the forward pointer
        + sizeof(NV_LIST_TERMINATOR);
//
    // Do a compile time sanity check on the setting for NV_MEMORY_SIZE
#if NV_MEMORY_SIZE < 1024
#error "NV_MEMORY_SIZE probably isn't large enough"
#endif

    // For NV Index, need to make sure that we do not allocate an Index if this
    // would mean that the TPM cannot allocate the minimum number of evict
    // objects.
    if(isIndex)
    {
        // Get the number of persistent objects allocated
        UINT32      persistentNum = NvCapGetPersistentNumber();

        // If we have not allocated the requisite number of evict objects, then we
        // need to reserve space for them.
        // NOTE: some of this is not written as simply as it might seem because
        // the values are all unsigned and subtracting needs to be done carefully
        // so that an underflow doesn't cause problems.
        if(persistentNum < MIN_EVICT_OBJECTS)
            reserved += (MIN_EVICT_OBJECTS - persistentNum) * NV_EVICT_OBJECT_SIZE;
    }
    // If this is not an index or is not a counter, reserve space for the
    // required number of counter indexes
    if(!isIndex || !isCounter)
    {
        // Get the number of counters
        UINT32      counterNum = NvCapGetCounterNumber();

        // If the required number of counters have not been allocated, reserved
        // space for the extra needed counters
        if(counterNum < MIN_COUNTER_INDICES)
            reserved += (MIN_COUNTER_INDICES - counterNum) * NV_INDEX_COUNTER_SIZE;
    }
    // Check that the requested allocation will fit after making sure that there
    // will be no chance of overflow
    return ((reserved < remainBytes)
            && (size <= remainBytes)
            && (size + reserved <= remainBytes));
}

//*** NvWriteNvListEnd()
// Function to write the list terminator.
NV_REF
NvWriteNvListEnd(
    NV_REF           end
    )
{
    // Marker is initialized with zeros
    BYTE        listEndMarker[sizeof(NV_LIST_TERMINATOR)] = {0};
    UINT64      maxCount = NvReadMaxCount();
//
    // This is a constant check that can be resolved at compile time.
    cAssert(sizeof(UINT64) <= sizeof(NV_LIST_TERMINATOR) - sizeof(UINT32));

    // Copy the maxCount value to the marker buffer
    MemoryCopy(&listEndMarker[sizeof(UINT32)], &maxCount, sizeof(UINT64));
    pAssert(end + sizeof(NV_LIST_TERMINATOR) <= s_evictNvEnd);

    // Write it to memory
    NvWrite(end, sizeof(NV_LIST_TERMINATOR), &listEndMarker);
    return end + sizeof(NV_LIST_TERMINATOR);
}


//*** NvAdd()
// This function adds a new entity to NV.
//
// This function requires that there is enough space to add a new entity (i.e.,
// that NvTestSpace() has been called and the available space is at least as
// large as the required space).
//
// The 'totalSize' will be the size of 'entity'. If a handle is added, this
// function will increase the size accordingly.
static TPM_RC
NvAdd(
    UINT32           totalSize,     // IN: total size needed for this entity For
                                    //     evict object, totalSize is the same as
                                    //     bufferSize.  For NV Index, totalSize is
                                    //     bufferSize plus index data size
    UINT32           bufferSize,    // IN: size of initial buffer
    TPM_HANDLE       handle,        // IN: optional handle
    BYTE            *entity         // IN: initial buffer
    )
{
    NV_REF          newAddr;        // IN: where the new entity will start
    NV_REF          nextAddr;
//
    RETURN_IF_NV_IS_NOT_AVAILABLE;

    // Get the end of data list
    newAddr = NvGetEnd();

    // Step over the forward pointer
    nextAddr = newAddr + sizeof(UINT32);

    // Optionally write the handle. For indexes, the handle is TPM_RH_UNASSIGNED
    // so that the handle in the nvIndex is used instead of writing this value
    if(handle != TPM_RH_UNASSIGNED)
    {
        NvWrite((UINT32)nextAddr, sizeof(TPM_HANDLE), &handle);
        nextAddr += sizeof(TPM_HANDLE);
    }
    // Write entity data
    NvWrite((UINT32)nextAddr, bufferSize, entity);

    // Advance the pointer by the amount of the total
    nextAddr += totalSize;

    // Finish by writing the link value

    // Write the next offset (relative addressing)
    totalSize = nextAddr - newAddr;

    // Write link value
    NvWrite((UINT32)newAddr, sizeof(UINT32), &totalSize);

    // Write the list terminator
    NvWriteNvListEnd(nextAddr);

    return TPM_RC_SUCCESS;
}

//*** NvDelete()
// This function is used to delete an NV Index or persistent object from NV memory.
static TPM_RC
NvDelete(
    NV_REF           entityRef      // IN: reference to entity to be deleted
    )
{
    UINT32          entrySize;
    // adjust entityAddr to back up and point to the forward pointer
    NV_REF          entryRef = entityRef - sizeof(UINT32);
    NV_REF          endRef = NvGetEnd();
    NV_REF          nextAddr; // address of the next entry
//
    RETURN_IF_NV_IS_NOT_AVAILABLE;

    // Get the offset of the next entry. That is, back up and point to the size
    // field of the entry
    NvRead(&entrySize, entryRef, sizeof(UINT32));

    // The next entry after the one being deleted is at a relative offset
    // from the current entry
    nextAddr = entryRef + entrySize;

    // If this is not the last entry, move everything up
    if(nextAddr < endRef)
    {
        pAssert(nextAddr > entryRef);
        _plat__NvMemoryMove(nextAddr,
                            entryRef,
                            (endRef - nextAddr));
    }
    // The end of the used space is now moved up by the amount of space we just
    // reclaimed
    endRef -= entrySize;

    // Write the end marker, and make the new end equal to the first byte after
    // the just added end value. This will automatically update the NV value for
    // maxCounter.
    // NOTE: This is the call that sets flag to cause NV to be updated 
    endRef = NvWriteNvListEnd(endRef);

    // Clear the reclaimed memory
    _plat__NvMemoryClear(endRef, entrySize);

    return TPM_RC_SUCCESS;
}

//************************************************
//** RAM-based NV Index Data Access Functions
//************************************************
//*** Introduction
// The data layout in ram buffer is {size of(NV_handle + attributes + data
// NV_handle, attributes, data}
// for each NV Index data stored in RAM.
//
// NV storage associated with orderly data is updated when a NV Index is added
// but NOT when the data or attributes are changed. Orderly data is only updated
// to NV on an orderly shutdown (TPM2_Shutdown()) 

//*** NvRamNext()
// This function is used to iterate trough the list of Ram Index values. *iter needs
// to be initialized by calling 
static NV_RAM_REF
NvRamNext(
    NV_RAM_REF      *iter,          // IN/OUT: the list iterator
    TPM_HANDLE      *handle         // OUT: the handle of the next item.
    )
{
    NV_RAM_REF           currentAddr;
    NV_RAM_HEADER        header;
//
    // If iterator is at the beginning of list
    if(*iter == NV_RAM_REF_INIT)
    {
        // Initialize iterator
        *iter = &s_indexOrderlyRam[0];
    }
    // if we are going to return what the iter is currently pointing to...
    currentAddr = *iter;

    // If iterator reaches the end of NV space, then don't advance and return
    // that we are at the end of the list. The end of the list occurs when
    // we don't have space for a size and a handle
    if(currentAddr + sizeof(NV_RAM_HEADER) > RAM_ORDERLY_END)
        return NULL;
    // read the header of the next entry
    MemoryCopy(&header, currentAddr, sizeof(NV_RAM_HEADER));

    // if the size field is zero, then we have hit the end of the list
    if(header.size == 0)
        // leave the *iter pointing at the end of the list
        return NULL;
    // advance the header by the size of the entry
    *iter = currentAddr + header.size;

//    pAssert(*iter <= RAM_ORDERLY_END);
    if(handle != NULL)
        *handle = header.handle;
    return currentAddr;
}

//*** NvRamGetEnd()
// This routine performs the same function as NvGetEnd() but for the RAM data.
static NV_RAM_REF
NvRamGetEnd(
    void
    )
{
    NV_RAM_REF           iter = NV_RAM_REF_INIT;
    NV_RAM_REF           currentAddr;
//
    // Scan until the next address is 0
    while((currentAddr = NvRamNext(&iter, NULL)) != 0);
    return iter;
}

//*** NvRamTestSpaceIndex()
// This function indicates if there is enough RAM space to add a data for a
// new NV Index.
//  Return Type: BOOL
//      TRUE(1)         space available
//      FALSE(0)        no enough space
static BOOL
NvRamTestSpaceIndex(
    UINT32           size           // IN: size of the data to be added to RAM
    )
{
    UINT32          remaining = (UINT32)(RAM_ORDERLY_END - NvRamGetEnd());
    UINT32          needed = sizeof(NV_RAM_HEADER) + size;
//
    // NvRamGetEnd points to the next available byte. 
    return remaining >= needed;
}

//*** NvRamGetIndex()
// This function returns the offset of NV data in the RAM buffer
//
// This function requires that NV Index is in RAM. That is, the
// index must be known to exist.
static NV_RAM_REF
NvRamGetIndex(
    TPMI_RH_NV_INDEX     handle         // IN: NV handle
    )
{
    NV_RAM_REF          iter = NV_RAM_REF_INIT;
    NV_RAM_REF          currentAddr;
    TPM_HANDLE          foundHandle;
//
    while((currentAddr = NvRamNext(&iter, &foundHandle)) != 0)
    {
        if(handle == foundHandle)
            break;
    }
    return currentAddr;
}

//*** NvUpdateIndexOrderlyData()
// This function is used to cause an update of the orderly data to the NV backing
// store.
void
NvUpdateIndexOrderlyData(
    void
    )
{
    // Write reserved RAM space to NV
    NvWrite(NV_INDEX_RAM_DATA, sizeof(s_indexOrderlyRam), s_indexOrderlyRam);
}

//*** NvAddRAM()
// This function adds a new data area to RAM.
//
// This function requires that enough free RAM space is available to add
// the new data.
//
// This function should be called after the NV Index space has been updated
// and the index removed. This insures that NV is available so that checking
// for NV availability is not required during this function.
static void
NvAddRAM(
    TPMS_NV_PUBLIC  *index          // IN: the index descriptor
    )
{
    NV_RAM_HEADER       header;
    NV_RAM_REF          end = NvRamGetEnd();
//
    header.size = sizeof(NV_RAM_HEADER) + index->dataSize;
    header.handle = index->nvIndex;
    MemoryCopy(&header.attributes, &index->attributes, sizeof(TPMA_NV));

    pAssert(ORDERLY_RAM_ADDRESS_OK(end, header.size));

    // Copy the header to the memory
    MemoryCopy(end, &header, sizeof(NV_RAM_HEADER));

    // Clear the data area (just in case)
    MemorySet(end + sizeof(NV_RAM_HEADER), 0, index->dataSize);

    // Step over this new entry
    end += header.size;

    // If the end marker will fit, add it
    if(end + sizeof(UINT32) < RAM_ORDERLY_END)
        MemorySet(end, 0, sizeof(UINT32));
    // Write reserved RAM space to NV to reflect the newly added NV Index
    SET_NV_UPDATE(UT_ORDERLY);

    return;
}

//*** NvDeleteRAM()
// This function is used to delete a RAM-backed NV Index data area.
// The space used by the entry are overwritten by the contents of the
// Index data that comes after (the data is moved up to fill the hole left
// by removing this index. The reclaimed space is cleared to zeros.
// This function assumes the data of NV Index exists in RAM.
//
// This function should be called after the NV Index space has been updated
// and the index removed. This insures that NV is available so that checking
// for NV availability is not required during this function.
static void
NvDeleteRAM(
    TPMI_RH_NV_INDEX     handle         // IN: NV handle
    )
{
    NV_RAM_REF           nodeAddress;
    NV_RAM_REF           nextNode;
    UINT32               size;
    NV_RAM_REF           lastUsed = NvRamGetEnd();
//
    nodeAddress = NvRamGetIndex(handle);

    pAssert(nodeAddress != 0);

    // Get node size
    MemoryCopy(&size, nodeAddress, sizeof(size));

    // Get the offset of next node
    nextNode = nodeAddress + size;

    // Copy the data
    MemoryCopy(nodeAddress, nextNode, (int)(lastUsed - nextNode));

    // Clear out the reclaimed space
    MemorySet(lastUsed - size, 0, size);

    // Write reserved RAM space to NV to reflect the newly delete NV Index
    SET_NV_UPDATE(UT_ORDERLY);

    return;
}

//*** NvReadIndex()
// This function is used to read the NV Index NV_INDEX. This is used so that the
// index information can be compressed and only this function would be needed
// to decompress it. Mostly, compression would only be able to save the space
// needed by the policy.
void
NvReadNvIndexInfo(
    NV_REF           ref,           // IN: points to NV where index is located
    NV_INDEX        *nvIndex        // OUT: place to receive index data
    )
{
    pAssert(nvIndex != NULL);
    NvRead(nvIndex, ref, sizeof(NV_INDEX));
    return;
}

//*** NvReadObject()
// This function is used to read a persistent object. This is used so that the
// object information can be compressed and only this function would be needed
// to uncompress it.
void
NvReadObject(
    NV_REF           ref,           // IN: points to NV where index is located
    OBJECT          *object         // OUT: place to receive the object data
    )
{
    NvRead(object, (ref + sizeof(TPM_HANDLE)), sizeof(OBJECT));
    return;
}

//*** NvFindEvict()
// This function will return the NV offset of an evict object
//  Return Type: UINT32
//      0               evict object not found
//      != 0            offset of evict object
static NV_REF
NvFindEvict(
    TPM_HANDLE       nvHandle,
    OBJECT          *object
    )
{
    NV_REF          found = NvFindHandle(nvHandle);
//
    // If we found the handle and the request included an object pointer, fill it in
    if(found != 0 && object != NULL)
        NvReadObject(found, object);
    return found;
}

//*** NvIndexIsDefined()
// See if an index is already defined
BOOL
NvIndexIsDefined(
    TPM_HANDLE       nvHandle       // IN: Index to look for
    )
{
    return (NvFindHandle(nvHandle) != 0);
}

//*** NvConditionallyWrite()
// Function to check if the data to be written has changed
// and write it if it has
//  Return Type: TPM_RC
//      TPM_RC_NV_RATE           NV is unavailable because of rate limit
//      TPM_RC_NV_UNAVAILABLE    NV is inaccessible
static TPM_RC
NvConditionallyWrite(
    NV_REF           entryAddr,     // IN: stating address
    UINT32           size,          // IN: size of the data to write
    void            *data           // IN: the data to write
    )
{
    // If the index data is actually changed, then a write to NV is required
    if(_plat__NvIsDifferent(entryAddr, size, data))
    {
        // Write the data if NV is available
        if(g_NvStatus == TPM_RC_SUCCESS)
        {
            NvWrite(entryAddr, size, data);
        }
        return g_NvStatus;
    }
    return TPM_RC_SUCCESS;
}

//*** NvReadNvIndexAttributes()
// This function returns the attributes of an NV Index.
static TPMA_NV
NvReadNvIndexAttributes(
    NV_REF           locator        // IN: reference to an NV index
    )
{
    TPMA_NV                 attributes;
//
    NvRead(&attributes,
           locator + offsetof(NV_INDEX, publicArea.attributes),
           sizeof(TPMA_NV));
    return attributes;
}

//*** NvReadRamIndexAttributes()
// This function returns the attributes from the RAM header structure. This function
// is used to deal with the fact that the header structure is only byte aligned.
static TPMA_NV
NvReadRamIndexAttributes(
    NV_RAM_REF       ref            // IN: pointer to a NV_RAM_HEADER
    )
{
    TPMA_NV         attributes;
//
    MemoryCopy(&attributes, ref + offsetof(NV_RAM_HEADER, attributes), 
               sizeof(TPMA_NV));
    return attributes;
}

//*** NvWriteNvIndexAttributes()
// This function is used to write just the attributes of an index to NV.
//  Return type: TPM_RC
//      TPM_RC_NV_RATE          NV is rate limiting so retry
//      TPM_RC_NV_UNAVAILABLE   NV is not available
static TPM_RC
NvWriteNvIndexAttributes(
    NV_REF           locator,       // IN: location of the index
    TPMA_NV          attributes     // IN: attributes to write
    )
{
    return NvConditionallyWrite(
        locator + offsetof(NV_INDEX, publicArea.attributes),
        sizeof(TPMA_NV),
        &attributes);
}

//*** NvWriteRamIndexAttributes()
// This function is used to write the index attributes into an unaligned structure
static void
NvWriteRamIndexAttributes(
    NV_RAM_REF       ref,           // IN: address of the header
    TPMA_NV          attributes     // IN: the attributes to write
    )
{
    MemoryCopy(ref + offsetof(NV_RAM_HEADER, attributes), &attributes,
               sizeof(TPMA_NV));
    return;
}

//************************************************
//** Externally Accessible Functions
//************************************************

//*** NvIsPlatformPersistentHandle()
// This function indicates if a handle references a persistent object in the
// range belonging to the platform.
//  Return Type: BOOL
//      TRUE(1)         handle references a platform persistent object
//      FALSE(0)        handle does not reference platform persistent object
BOOL
NvIsPlatformPersistentHandle(
    TPM_HANDLE       handle         // IN: handle
    )
{
    return (handle >= PLATFORM_PERSISTENT && handle <= PERSISTENT_LAST);
}

//*** NvIsOwnerPersistentHandle()
// This function indicates if a handle references a persistent object in the
// range belonging to the owner.
//  Return Type: BOOL
//      TRUE(1)         handle is owner persistent handle
//      FALSE(0)        handle is not owner persistent handle and may not be
//                      a persistent handle at all
BOOL
NvIsOwnerPersistentHandle(
    TPM_HANDLE       handle         // IN: handle
    )
{
    return (handle >= PERSISTENT_FIRST && handle < PLATFORM_PERSISTENT);
}

//*** NvIndexIsAccessible()
//
// This function validates that a handle references a defined NV Index and
// that the Index is currently accessible.
//  Return Type: TPM_RC
//      TPM_RC_HANDLE           the handle points to an undefined NV Index
//                              If shEnable is CLEAR, this would include an index
//                              created using ownerAuth. If phEnableNV is CLEAR,
//                              this would include and index created using
//                              platformAuth
//      TPM_RC_NV_READLOCKED    Index is present but locked for reading and command
//                              does not write to the index
//      TPM_RC_NV_WRITELOCKED   Index is present but locked for writing and command
//                              writes to the index
TPM_RC
NvIndexIsAccessible(
    TPMI_RH_NV_INDEX     handle        // IN: handle
    )
{
    NV_INDEX            *nvIndex = NvGetIndexInfo(handle, NULL);
//
    if(nvIndex == NULL)
    // If index is not found, return TPM_RC_HANDLE
        return TPM_RC_HANDLE;
    if(gc.shEnable == FALSE || gc.phEnableNV == FALSE)
    {
        // if shEnable is CLEAR, an ownerCreate NV Index should not be
        // indicated as present
        if(!IS_ATTRIBUTE(nvIndex->publicArea.attributes, TPMA_NV, PLATFORMCREATE))   
        {
            if(gc.shEnable == FALSE)
                return TPM_RC_HANDLE;
        }
        // if phEnableNV is CLEAR, a platform created Index should not
        // be visible
        else if(gc.phEnableNV == FALSE)
            return TPM_RC_HANDLE;
    }
#if 0 // Writelock test for debug
    // If the Index is write locked and this is an NV Write operation...
    if(IS_ATTRIBUTE(nvIndex->publicArea.attributes, TPMA_NV, WRITELOCKED)   
       &&  IsWriteOperation(commandIndex))
    {
        // then return a locked indication unless the command is TPM2_NV_WriteLock
        if(GetCommandCode(commandIndex) != TPM_CC_NV_WriteLock)
            return TPM_RC_NV_LOCKED;
        return TPM_RC_SUCCESS;
    }
#endif
#if 0   // Readlock Test for debug
    // If the Index is read locked and this is an NV Read operation...
    if(IS_ATTRIBUTE(nvIndex->publicArea.attributes, TPMA_NV, READLOCKED)   
       && IsReadOperation(commandIndex))
    {
        // then return a locked indication unless the command is TPM2_NV_ReadLock
        if(GetCommandCode(commandIndex) != TPM_CC_NV_ReadLock)
            return TPM_RC_NV_LOCKED;
    }
#endif
    // NV Index is accessible
    return TPM_RC_SUCCESS;
}

//*** NvGetEvictObject()
// This function is used to dereference an evict object handle and get a pointer
// to the object.
//  Return Type: TPM_RC
//      TPM_RC_HANDLE           the handle does not point to an existing
//                              persistent object
TPM_RC
NvGetEvictObject(
    TPM_HANDLE       handle,        // IN: handle
    OBJECT          *object         // OUT: object data
    )
{
    NV_REF          entityAddr;         // offset points to the entity
//
    // Find the address of evict object and copy to object
    entityAddr = NvFindEvict(handle, object);

    // whether there is an error or not, make sure that the evict
    // status of the object is set so that the slot will get freed on exit
    // Must do this after NvFindEvict loads the object
    object->attributes.evict = SET;

    // If handle is not found, return an error
    if(entityAddr == 0)
        return TPM_RC_HANDLE;
    return TPM_RC_SUCCESS;
}

//*** NvIndexCacheInit()
// Function to initialize the Index cache
void
NvIndexCacheInit(
    void
    )
{
    s_cachedNvRef = NV_REF_INIT;
    s_cachedNvRamRef = NV_RAM_REF_INIT;
    s_cachedNvIndex.publicArea.nvIndex = TPM_RH_UNASSIGNED;
    return;
}


//*** NvGetIndexData()
// This function is used to access the data in an NV Index. The data is returned
// as a byte sequence.
//
// This function requires that the NV Index be defined, and that the
// required data is within the data range.  It also requires that TPMA_NV_WRITTEN
// of the Index is SET.
void
NvGetIndexData(
    NV_INDEX            *nvIndex,       // IN: the in RAM index descriptor
    NV_REF               locator,       // IN: where the data is located
    UINT32               offset,        // IN: offset of NV data
    UINT16               size,          // IN: number of octets of NV data to read
    void                *data           // OUT: data buffer
    )
{
    TPMA_NV             nvAttributes;
//
    pAssert(nvIndex != NULL);

    nvAttributes = nvIndex->publicArea.attributes;

    pAssert(IS_ATTRIBUTE(nvAttributes, TPMA_NV, WRITTEN));

    if(IS_ATTRIBUTE(nvAttributes, TPMA_NV, ORDERLY))
    {
        // Get data from RAM buffer
        NV_RAM_REF           ramAddr = NvRamGetIndex(nvIndex->publicArea.nvIndex);
        pAssert(ramAddr != 0 && (size <=
                ((NV_RAM_HEADER *)ramAddr)->size - sizeof(NV_RAM_HEADER) - offset));
        MemoryCopy(data, ramAddr + sizeof(NV_RAM_HEADER) + offset, size);
    }
    else
    {
        // Validate that read falls within range of the index
        pAssert(offset <= nvIndex->publicArea.dataSize
                &&  size <= (nvIndex->publicArea.dataSize - offset));
        NvRead(data, locator + sizeof(NV_INDEX) + offset, size);
    }
    return;
}

//*** NvHashIndexData()
// This function adds Index data to a hash. It does this in parts to avoid large stack
// buffers.
void
NvHashIndexData(
    HASH_STATE          *hashState,     // IN: Initialized hash state
    NV_INDEX            *nvIndex,       // IN: Index 
    NV_REF               locator,       // IN: where the data is located
    UINT32               offset,        // IN: starting offset
    UINT16               size           // IN: amount to hash
)
{
#define BUFFER_SIZE     64
    BYTE                 buffer[BUFFER_SIZE];
    if (offset > nvIndex->publicArea.dataSize)
        return;
    // Make sure that we don't try to read off the end.
    if ((offset + size) > nvIndex->publicArea.dataSize)
        size = nvIndex->publicArea.dataSize - (UINT16)offset;
#if BUFFER_SIZE >= MAX_NV_INDEX_SIZE
    NvGetIndexData(nvIndex, locator, offset, size, buffer);
    CryptDigestUpdate(hashState, size, buffer);
#else
    {
        INT16                i;
        UINT16               readSize;
        //
        for (i = size; i > 0; offset += readSize, i -= readSize)
        {
            readSize = (i < BUFFER_SIZE) ? i : BUFFER_SIZE;
            NvGetIndexData(nvIndex, locator, offset, readSize, buffer);
            CryptDigestUpdate(hashState, readSize, buffer);
        }
    }
#endif // BUFFER_SIZE >= MAX_NV_INDEX_SIZE
#undef  BUFFER_SIZE
}


//*** NvGetUINT64Data()
// Get data in integer format of a bit or counter NV Index.
//
// This function requires that the NV Index is defined and that the NV Index
// previously has been written.
UINT64
NvGetUINT64Data(
    NV_INDEX            *nvIndex,       // IN: the in RAM index descriptor
    NV_REF               locator        // IN: where index exists in NV
    )
{
    UINT64                intVal;
//
    // Read the value and convert it to internal format
    NvGetIndexData(nvIndex, locator, 0, 8, &intVal);
    return BYTE_ARRAY_TO_UINT64(((BYTE *)&intVal));
}

//*** NvWriteIndexAttributes()
// This function is used to write just the attributes of an index.
//  Return type: TPM_RC
//      TPM_RC_NV_RATE          NV is rate limiting so retry
//      TPM_RC_NV_UNAVAILABLE   NV is not available
TPM_RC
NvWriteIndexAttributes(
    TPM_HANDLE       handle,
    NV_REF           locator,       // IN: location of the index
    TPMA_NV          attributes     // IN: attributes to write
    )
{
    TPM_RC              result;
//
    if(IS_ATTRIBUTE(attributes, TPMA_NV, ORDERLY))   
    {
        NV_RAM_REF      ram = NvRamGetIndex(handle);
        NvWriteRamIndexAttributes(ram, attributes);
        result = TPM_RC_SUCCESS;
    }
    else
    {
        result = NvWriteNvIndexAttributes(locator, attributes);
    }
    return result;
}

//*** NvWriteIndexAuth()
// This function is used to write the authValue of an index. It is used by
// TPM2_NV_ChangeAuth()
//  Return type: TPM_RC
//      TPM_RC_NV_RATE          NV is rate limiting so retry
//      TPM_RC_NV_UNAVAILABLE   NV is not available
TPM_RC
NvWriteIndexAuth(
    NV_REF           locator,       // IN: location of the index
    TPM2B_AUTH      *authValue      // IN: the authValue to write
    )
{
    TPM_RC              result;
//
    // If the locator is pointing to the cached index value...
    if(locator == s_cachedNvRef)
    {
        // copy the authValue to the cached index so it will be there if we
        // look for it. This is a safety thing.
        MemoryCopy2B(&s_cachedNvIndex.authValue.b, &authValue->b,
                     sizeof(s_cachedNvIndex.authValue.t.buffer));
    }
    result = NvConditionallyWrite(
        locator + offsetof(NV_INDEX, authValue),
        sizeof(UINT16) + authValue->t.size,
        authValue);
    return result;
}

//*** NvGetIndexInfo()
// This function loads the nvIndex Info into the NV cache and returns a pointer
// to the NV_INDEX. If the returned value is zero, the index was not found.
// The 'locator' parameter, if not NULL, will be set to the offset in NV of the
// Index (the location of the handle of the Index).
//
// This function will set the index cache. If the index is orderly, the attributes
// from RAM are substituted for the attributes in the cached index
NV_INDEX *
NvGetIndexInfo(
    TPM_HANDLE       nvHandle,      // IN: the index handle
    NV_REF          *locator        // OUT: location of the index
    )
{
    if(s_cachedNvIndex.publicArea.nvIndex != nvHandle)
    {
        s_cachedNvIndex.publicArea.nvIndex = TPM_RH_UNASSIGNED;
        s_cachedNvRamRef = 0;
        s_cachedNvRef = NvFindHandle(nvHandle);
        if(s_cachedNvRef == 0)
            return NULL;
        NvReadNvIndexInfo(s_cachedNvRef, &s_cachedNvIndex);
        if(IS_ATTRIBUTE(s_cachedNvIndex.publicArea.attributes, TPMA_NV, ORDERLY))
        {
            s_cachedNvRamRef = NvRamGetIndex(nvHandle);
            s_cachedNvIndex.publicArea.attributes =
                NvReadRamIndexAttributes(s_cachedNvRamRef);
        }
    }
    if(locator != NULL)
        *locator = s_cachedNvRef;
    return &s_cachedNvIndex;
}

//*** NvWriteIndexData()
// This function is used to write NV index data. It is intended to be used to
// update the data associated with the default index.
//
// This function requires that the NV Index is defined, and the data is
// within the defined data range for the index.
//
// Index data is only written due to a command that modifies the data in a single
// index. There is no case where changes are made to multiple indexes data at the
// same time. Multiple attributes may be change but not multiple index data. This
// is important because we will normally be handling the index for which we have
// the cached pointer values.
//  Return type: TPM_RC
//      TPM_RC_NV_RATE          NV is rate limiting so retry
//      TPM_RC_NV_UNAVAILABLE   NV is not available
TPM_RC
NvWriteIndexData(
    NV_INDEX        *nvIndex,       // IN: the description of the index
    UINT32           offset,        // IN: offset of NV data
    UINT32           size,          // IN: size of NV data
    void            *data           // IN: data buffer
    )
{
    TPM_RC               result = TPM_RC_SUCCESS;
//
    pAssert(nvIndex != NULL);
    // Make sure that this is dealing with the 'default' index.
    // Note: it is tempting to change the calling sequence so that the 'default' is
    // presumed.
    pAssert(nvIndex->publicArea.nvIndex == s_cachedNvIndex.publicArea.nvIndex);

    // Validate that write falls within range of the index
    pAssert(offset <= nvIndex->publicArea.dataSize
            &&  size <= (nvIndex->publicArea.dataSize - offset));

    // Update TPMA_NV_WRITTEN bit if necessary
    if(!IS_ATTRIBUTE(nvIndex->publicArea.attributes, TPMA_NV, WRITTEN))
    {
        // Update the in memory version of the attributes
        SET_ATTRIBUTE(nvIndex->publicArea.attributes, TPMA_NV, WRITTEN);

        // If this is not orderly, then update the NV version of
        // the attributes
        if(!IS_ATTRIBUTE(nvIndex->publicArea.attributes, TPMA_NV, ORDERLY))
        {
            result = NvWriteNvIndexAttributes(s_cachedNvRef, 
                                              nvIndex->publicArea.attributes);
            if(result != TPM_RC_SUCCESS)
                return result;
            // If this is a partial write of an ordinary index, clear the whole
            // index.
            if(IsNvOrdinaryIndex(nvIndex->publicArea.attributes)
               && (nvIndex->publicArea.dataSize > size))
                _plat__NvMemoryClear(s_cachedNvRef + sizeof(NV_INDEX),
                                     nvIndex->publicArea.dataSize);
        }
        else
        {
            // This is orderly so update the RAM version
            MemoryCopy(s_cachedNvRamRef + offsetof(NV_RAM_HEADER, attributes),
                       &nvIndex->publicArea.attributes, sizeof(TPMA_NV));
            // If setting WRITTEN for an orderly counter, make sure that the
            // state saved version of the counter is saved
            if(IsNvCounterIndex(nvIndex->publicArea.attributes))
                SET_NV_UPDATE(UT_ORDERLY);
            // If setting the written attribute on an ordinary index, make sure that
            // the data is all cleared out in case there is a partial write. This
            // is only necessary for ordinary indexes because all of the other types
            // are always written in total.
            else if(IsNvOrdinaryIndex(nvIndex->publicArea.attributes))
                MemorySet(s_cachedNvRamRef + sizeof(NV_RAM_HEADER),
                          0, nvIndex->publicArea.dataSize);
        }
    }
    // If this is orderly data, write it to RAM
    if(IS_ATTRIBUTE(nvIndex->publicArea.attributes, TPMA_NV, ORDERLY))
    {
        // Note: if this is the first write to a counter, the code above will queue
        // the write to NV of the RAM data in order to update TPMA_NV_WRITTEN. In 
        // process of doing that write, it will also write the initial counter value

        // Update RAM
        MemoryCopy(s_cachedNvRamRef + sizeof(NV_RAM_HEADER) + offset, data, size);

        // And indicate that the TPM is no longer orderly
        g_clearOrderly = TRUE;
    }
    else
    {
        // Offset into the index to the first byte of the data to be written to NV
        result = NvConditionallyWrite(s_cachedNvRef + sizeof(NV_INDEX) + offset,
                                      size, data);
    }
    return result;
}

//*** NvWriteUINT64Data()
// This function to write back a UINT64 value. The various UINT64 values (bits,
// counters, and PINs) are kept in canonical format but manipulate in native
// format. This takes a native format value converts it and saves it back as
// in canonical format.
//
// This function will return the value from NV or RAM depending on the type of the
// index (orderly or not)
//
TPM_RC
NvWriteUINT64Data(
    NV_INDEX        *nvIndex,       // IN: the description of the index
    UINT64           intValue       // IN: the value to write
    )
{
    BYTE            bytes[8];
    UINT64_TO_BYTE_ARRAY(intValue, bytes);
//
    return NvWriteIndexData(nvIndex, 0, 8, &bytes);
}

//*** NvGetIndexName()
// This function computes the Name of an index
// The 'name' buffer receives the bytes of the Name and the return value
// is the number of octets in the Name.
//
// This function requires that the NV Index is defined.
TPM2B_NAME *
NvGetIndexName(
    NV_INDEX        *nvIndex,       // IN: the index over which the name is to be
                                    //     computed
    TPM2B_NAME      *name           // OUT: name of the index
    )
{
    UINT16               dataSize, digestSize;
    BYTE                 marshalBuffer[sizeof(TPMS_NV_PUBLIC)];
    BYTE                *buffer;
    HASH_STATE           hashState;
//
    // Marshal public area
    buffer = marshalBuffer;
    dataSize = TPMS_NV_PUBLIC_Marshal(&nvIndex->publicArea, &buffer, NULL);

    // hash public area
    digestSize = CryptHashStart(&hashState, nvIndex->publicArea.nameAlg);
    CryptDigestUpdate(&hashState, dataSize, marshalBuffer);

    // Complete digest leaving room for the nameAlg
    CryptHashEnd(&hashState, digestSize, &name->b.buffer[2]);

    // Include the nameAlg
    UINT16_TO_BYTE_ARRAY(nvIndex->publicArea.nameAlg, name->b.buffer);
    name->t.size = digestSize + 2;
    return name;
}

//*** NvGetNameByIndexHandle()
// This function is used to compute the Name of an NV Index referenced by handle.
//
// The 'name' buffer receives the bytes of the Name and the return value
// is the number of octets in the Name.
//
// This function requires that the NV Index is defined.
TPM2B_NAME *
NvGetNameByIndexHandle(
    TPMI_RH_NV_INDEX     handle,        // IN: handle of the index
    TPM2B_NAME          *name           // OUT: name of the index
    )
{
    NV_INDEX             *nvIndex = NvGetIndexInfo(handle, NULL);
//
    return NvGetIndexName(nvIndex, name);
}

//*** NvDefineIndex()
// This function is used to assign NV memory to an NV Index.
//
//  Return Type: TPM_RC
//      TPM_RC_NV_SPACE         insufficient NV space
TPM_RC
NvDefineIndex(
    TPMS_NV_PUBLIC  *publicArea,    // IN: A template for an area to create.
    TPM2B_AUTH      *authValue      // IN: The initial authorization value
    )
{
    // The buffer to be written to NV memory
    NV_INDEX        nvIndex;            // the index data
    UINT16          entrySize;          // size of entry
    TPM_RC          result;
//
    entrySize = sizeof(NV_INDEX);

    // only allocate data space for indexes that are going to be written to NV.
    // Orderly indexes don't need space.
    if(!IS_ATTRIBUTE(publicArea->attributes, TPMA_NV, ORDERLY))
        entrySize += publicArea->dataSize;
    // Check if we have enough space to create the NV Index
    // In this implementation, the only resource limitation is the available NV
    // space (and possibly RAM space.)  Other implementation may have other
    // limitation on counter or on NV slots
    if(!NvTestSpace(entrySize, TRUE, IsNvCounterIndex(publicArea->attributes)))
        return TPM_RC_NV_SPACE;

    // if the index to be defined is RAM backed, check RAM space availability
    // as well
    if(IS_ATTRIBUTE(publicArea->attributes, TPMA_NV, ORDERLY)   
       &&  !NvRamTestSpaceIndex(publicArea->dataSize))
        return TPM_RC_NV_SPACE;
    // Copy input value to nvBuffer
    nvIndex.publicArea = *publicArea;

    // Copy the authValue
    nvIndex.authValue = *authValue;

    // Add index to NV memory
    result = NvAdd(entrySize, sizeof(NV_INDEX), TPM_RH_UNASSIGNED,
                   (BYTE *)&nvIndex);
    if(result == TPM_RC_SUCCESS)
    {
    // If the data of NV Index is RAM backed, add the data area in RAM as well
        if(IS_ATTRIBUTE(publicArea->attributes, TPMA_NV, ORDERLY))
            NvAddRAM(publicArea);
    }
    return result;
}

//*** NvAddEvictObject()
// This function is used to assign NV memory to a persistent object.
//  Return Type: TPM_RC
//      TPM_RC_NV_HANDLE        the requested handle is already in use
//      TPM_RC_NV_SPACE         insufficient NV space
TPM_RC
NvAddEvictObject(
    TPMI_DH_OBJECT   evictHandle,   // IN: new evict handle
    OBJECT          *object         // IN: object to be added
    )
{
    TPM_HANDLE       temp = object->evictHandle;
    TPM_RC           result;
//
    // Check if we have enough space to add the evict object
    // An evict object needs 8 bytes in index table + sizeof OBJECT
    // In this implementation, the only resource limitation is the available NV
    // space.  Other implementation may have other limitation on evict object
    // handle space
    if(!NvTestSpace(sizeof(OBJECT) + sizeof(TPM_HANDLE), FALSE, FALSE))
        return TPM_RC_NV_SPACE;

    // Set evict attribute and handle
    object->attributes.evict = SET;
    object->evictHandle = evictHandle;

    // Now put this in NV
    result = NvAdd(sizeof(OBJECT), sizeof(OBJECT), evictHandle, (BYTE *)object);

    // Put things back the way they were
    object->attributes.evict = CLEAR;
    object->evictHandle = temp;

    return result;
}

//*** NvDeleteIndex()
// This function is used to delete an NV Index.
//  Return Type: TPM_RC
//      TPM_RC_NV_UNAVAILABLE   NV is not accessible
//      TPM_RC_NV_RATE          NV is rate limiting
TPM_RC
NvDeleteIndex(
    NV_INDEX        *nvIndex,       // IN: an in RAM index descriptor
    NV_REF           entityAddr     // IN: location in NV
    )
{
    TPM_RC           result;
//
    if(nvIndex != NULL)
    {
        // Whenever a counter is deleted, make sure that the MaxCounter value is
        // updated to reflect the value
        if(IsNvCounterIndex(nvIndex->publicArea.attributes) 
           && IS_ATTRIBUTE(nvIndex->publicArea.attributes, TPMA_NV, WRITTEN))
            NvUpdateMaxCount(NvGetUINT64Data(nvIndex, entityAddr));
        result = NvDelete(entityAddr);
        if(result != TPM_RC_SUCCESS)
            return result;
        // If the NV Index is RAM backed, delete the RAM data as well
        if(IS_ATTRIBUTE(nvIndex->publicArea.attributes, TPMA_NV, ORDERLY))
            NvDeleteRAM(nvIndex->publicArea.nvIndex);
        NvIndexCacheInit();
    }
    return TPM_RC_SUCCESS;
}

//*** NvDeleteEvict()
// This function will delete a NV evict object.
// Will return success if object deleted or if it does not exist

TPM_RC
NvDeleteEvict(
    TPM_HANDLE       handle         // IN: handle of entity to be deleted
    )
{
    NV_REF      entityAddr = NvFindEvict(handle, NULL);     // pointer to entity
    TPM_RC      result = TPM_RC_SUCCESS;
//
    if(entityAddr != 0)
        result = NvDelete(entityAddr);
    return result;
}

//*** NvFlushHierarchy()
// This function will delete persistent objects belonging to the indicated hierarchy.
// If the storage hierarchy is selected, the function will also delete any
// NV Index defined using ownerAuth.
//  Return Type: TPM_RC
//      TPM_RC_NV_RATE           NV is unavailable because of rate limit
//      TPM_RC_NV_UNAVAILABLE    NV is inaccessible
TPM_RC
NvFlushHierarchy(
    TPMI_RH_HIERARCHY    hierarchy      // IN: hierarchy to be flushed.
    )
{
    NV_REF           iter = NV_REF_INIT;
    NV_REF           currentAddr;
    TPM_HANDLE       entityHandle;
    TPM_RC           result = TPM_RC_SUCCESS;
//
    while((currentAddr = NvNext(&iter, &entityHandle)) != 0)
    {
        if(HandleGetType(entityHandle) == TPM_HT_NV_INDEX)
        {
            NV_INDEX        nvIndex;
//
            // If flush endorsement or platform hierarchy, no NV Index would be
            // flushed
            if(hierarchy == TPM_RH_ENDORSEMENT || hierarchy == TPM_RH_PLATFORM)
                continue;
            // Get the index information
            NvReadNvIndexInfo(currentAddr, &nvIndex);

            // For storage hierarchy, flush OwnerCreated index
            if(!IS_ATTRIBUTE(nvIndex.publicArea.attributes, TPMA_NV, 
                             PLATFORMCREATE))
            {
                // Delete the index (including RAM for orderly)
                result = NvDeleteIndex(&nvIndex, currentAddr);
                if(result != TPM_RC_SUCCESS)
                    break;
                // Re-iterate from beginning after a delete
                iter = NV_REF_INIT;
            }
        }
        else if(HandleGetType(entityHandle) == TPM_HT_PERSISTENT)
        {
            OBJECT_ATTRIBUTES           attributes;
//
            NvRead(&attributes,
                   (UINT32)(currentAddr
                            + sizeof(TPM_HANDLE)
                            + offsetof(OBJECT, attributes)),
                   sizeof(OBJECT_ATTRIBUTES));
            // If the evict object belongs to the hierarchy to be flushed...
            if((hierarchy == TPM_RH_PLATFORM && attributes.ppsHierarchy == SET)
               || (hierarchy == TPM_RH_OWNER && attributes.spsHierarchy == SET)
               || (hierarchy == TPM_RH_ENDORSEMENT
                   &&  attributes.epsHierarchy == SET))
            {
                // ...then delete the evict object
                result = NvDelete(currentAddr);
                if(result != TPM_RC_SUCCESS)
                    break;
                // Re-iterate from beginning after a delete
                iter = NV_REF_INIT;
            }
        }
        else
        {
            FAIL(FATAL_ERROR_INTERNAL);
        }
    }
    return result;
}

//*** NvSetGlobalLock()
// This function is used to SET the TPMA_NV_WRITELOCKED attribute for all
// NV indexes that have TPMA_NV_GLOBALLOCK SET. This function is use by
// TPM2_NV_GlobalWriteLock().
//  Return Type: TPM_RC
//      TPM_RC_NV_RATE           NV is unavailable because of rate limit
//      TPM_RC_NV_UNAVAILABLE    NV is inaccessible
TPM_RC
NvSetGlobalLock(
    void
    )
{
    NV_REF           iter = NV_REF_INIT;
    NV_RAM_REF       ramIter = NV_RAM_REF_INIT;
    NV_REF           currentAddr;
    NV_RAM_REF       currentRamAddr;
    TPM_RC           result = TPM_RC_SUCCESS;
//
    // Check all normal indexes
    while((currentAddr = NvNextIndex(NULL, &iter)) != 0)
    {
        TPMA_NV         attributes = NvReadNvIndexAttributes(currentAddr);
//
        // See if it should be locked
        if(!IS_ATTRIBUTE(attributes, TPMA_NV, ORDERLY)   
           &&  IS_ATTRIBUTE(attributes, TPMA_NV, GLOBALLOCK))
        {
            SET_ATTRIBUTE(attributes, TPMA_NV, WRITELOCKED);
            result = NvWriteNvIndexAttributes(currentAddr, attributes);
            if(result != TPM_RC_SUCCESS)
                return result;
        }
    }
    // Now search all the orderly attributes
    while((currentRamAddr = NvRamNext(&ramIter, NULL)) != 0)
    {
        // See if it should be locked
        TPMA_NV         attributes = NvReadRamIndexAttributes(currentRamAddr);
        if(IS_ATTRIBUTE(attributes, TPMA_NV, GLOBALLOCK))
        {
            SET_ATTRIBUTE(attributes, TPMA_NV, WRITELOCKED);
            NvWriteRamIndexAttributes(currentRamAddr, attributes);
        }
    }
    return result;
}

//***InsertSort()
// Sort a handle into handle list in ascending order.  The total handle number in
// the list should not exceed MAX_CAP_HANDLES
static void
InsertSort(
    TPML_HANDLE     *handleList,    // IN/OUT: sorted handle list
    UINT32           count,         // IN: maximum count in the handle list
    TPM_HANDLE       entityHandle   // IN: handle to be inserted
    )
{
    UINT32          i, j;
    UINT32          originalCount;
//
    // For a corner case that the maximum count is 0, do nothing
    if(count == 0)
        return;
    // For empty list, add the handle at the beginning and return
    if(handleList->count == 0)
    {
        handleList->handle[0] = entityHandle;
        handleList->count++;
        return;
    }
    // Check if the maximum of the list has been reached
    originalCount = handleList->count;
    if(originalCount < count)
        handleList->count++;
    // Insert the handle to the list
    for(i = 0; i < originalCount; i++)
    {
        if(handleList->handle[i] > entityHandle)
        {
            for(j = handleList->count - 1; j > i; j--)
            {
                handleList->handle[j] = handleList->handle[j - 1];
            }
            break;
        }
    }
    // If a slot was found, insert the handle in this position
    if(i < originalCount || handleList->count > originalCount)
        handleList->handle[i] = entityHandle;
    return;
}

//*** NvCapGetPersistent()
// This function is used to get a list of handles of the persistent objects,
// starting at 'handle'.
//
// 'Handle' must be in valid persistent object handle range, but does not
// have to reference an existing persistent object.
//  Return Type: TPMI_YES_NO
//      YES         if there are more handles available
//      NO          all the available handles has been returned
TPMI_YES_NO
NvCapGetPersistent(
    TPMI_DH_OBJECT   handle,        // IN: start handle
    UINT32           count,         // IN: maximum number of returned handles
    TPML_HANDLE     *handleList     // OUT: list of handle
    )
{
    TPMI_YES_NO              more = NO;
    NV_REF                   iter = NV_REF_INIT;
    NV_REF                   currentAddr;
    TPM_HANDLE               entityHandle;
//
    pAssert(HandleGetType(handle) == TPM_HT_PERSISTENT);

    // Initialize output handle list
    handleList->count = 0;

    // The maximum count of handles we may return is MAX_CAP_HANDLES
    if(count > MAX_CAP_HANDLES) count = MAX_CAP_HANDLES;

    while((currentAddr = NvNextEvict(&entityHandle, &iter)) != 0)
    {
        // Ignore persistent handles that have values less than the input handle
        if(entityHandle < handle)
            continue;
        // if the handles in the list have reached the requested count, and there
        // are still handles need to be inserted, indicate that there are more.
        if(handleList->count == count)
            more = YES;
        // A handle with a value larger than start handle is a candidate
        // for return. Insert sort it to the return list.  Insert sort algorithm
        // is chosen here for simplicity based on the assumption that the total
        // number of NV indexes is small.  For an implementation that may allow
        // large number of NV indexes, a more efficient sorting algorithm may be
        // used here.
        InsertSort(handleList, count, entityHandle);
    }
    return more;
}

//*** NvCapGetIndex()
// This function returns a list of handles of NV indexes, starting from 'handle'.
// 'Handle' must be in the range of NV indexes, but does not have to reference
// an existing NV Index.
//  Return Type: TPMI_YES_NO
//      YES         if there are more handles to report
//      NO          all the available handles has been reported
TPMI_YES_NO
NvCapGetIndex(
    TPMI_DH_OBJECT   handle,        // IN: start handle
    UINT32           count,         // IN: max number of returned handles
    TPML_HANDLE     *handleList     // OUT: list of handle
    )
{
    TPMI_YES_NO              more = NO;
    NV_REF                   iter = NV_REF_INIT;
    NV_REF                   currentAddr;
    TPM_HANDLE               nvHandle;
//
    pAssert(HandleGetType(handle) == TPM_HT_NV_INDEX);

    // Initialize output handle list
    handleList->count = 0;

    // The maximum count of handles we may return is MAX_CAP_HANDLES
    if(count > MAX_CAP_HANDLES) count = MAX_CAP_HANDLES;

    while((currentAddr = NvNextIndex(&nvHandle, &iter)) != 0)
    {
        // Ignore index handles that have values less than the 'handle'
        if(nvHandle < handle)
            continue;
        // if the count of handles in the list has reached the requested count,
        // and there are still handles to report, set more.
        if(handleList->count == count)
            more = YES;
        // A handle with a value larger than start handle is a candidate
        // for return. Insert sort it to the return list.  Insert sort algorithm
        // is chosen here for simplicity based on the assumption that the total
        // number of NV indexes is small.  For an implementation that may allow
        // large number of NV indexes, a more efficient sorting algorithm may be
        // used here.
        InsertSort(handleList, count, nvHandle);
    }
    return more;
}

//*** NvCapGetIndexNumber()
// This function returns the count of NV Indexes currently defined.
UINT32
NvCapGetIndexNumber(
    void
    )
{
    UINT32           num = 0;
    NV_REF           iter = NV_REF_INIT;
//
    while(NvNextIndex(NULL, &iter) != 0)
        num++;
    return num;
}

//*** NvCapGetPersistentNumber()
// Function returns the count of persistent objects currently in NV memory.
UINT32
NvCapGetPersistentNumber(
    void
    )
{
    UINT32          num = 0;
    NV_REF         iter = NV_REF_INIT;
    TPM_HANDLE      handle;
//
    while(NvNextEvict(&handle, &iter) != 0)
        num++;
    return num;
}

//*** NvCapGetPersistentAvail()
// This function returns an estimate of the number of additional persistent
// objects that could be loaded into NV memory.
UINT32
NvCapGetPersistentAvail(
    void
    )
{
    UINT32          availNVSpace;
    UINT32          counterNum = NvCapGetCounterNumber();
    UINT32          reserved = sizeof(NV_LIST_TERMINATOR);
//
    // Get the available space in NV storage
    availNVSpace = NvGetFreeBytes();

    if(counterNum < MIN_COUNTER_INDICES)
    {
        // Some space has to be reserved for counter objects.
        reserved += (MIN_COUNTER_INDICES - counterNum) * NV_INDEX_COUNTER_SIZE;
        if(reserved > availNVSpace)
            availNVSpace = 0;
        else
            availNVSpace -= reserved;
    }
    return availNVSpace / NV_EVICT_OBJECT_SIZE;
}

//*** NvCapGetCounterNumber()
// Get the number of defined NV Indexes that are counter indexes.
UINT32
NvCapGetCounterNumber(
    void
    )
{
    NV_REF           iter = NV_REF_INIT;
    NV_REF           currentAddr;
    UINT32           num = 0;
//
    while((currentAddr = NvNextIndex(NULL, &iter)) != 0)
    {
        TPMA_NV             attributes = NvReadNvIndexAttributes(currentAddr);
        if(IsNvCounterIndex(attributes))
            num++;
    }
    return num;
}

//*** NvSetStartupAttributes()
// Local function to set the attributes of an Index at TPM Reset and TPM Restart.
static TPMA_NV
NvSetStartupAttributes(
    TPMA_NV         attributes,         // IN: attributes to change
    STARTUP_TYPE     type               // IN: start up type
    )
{
    // Clear read lock
    CLEAR_ATTRIBUTE(attributes, TPMA_NV, READLOCKED);

    // Will change a non counter index to the unwritten state if:
    // a) TPMA_NV_CLEAR_STCLEAR is SET
    // b) orderly and TPM Reset
    if(!IsNvCounterIndex(attributes))
    {
        if(IS_ATTRIBUTE(attributes, TPMA_NV, CLEAR_STCLEAR)   
           || (IS_ATTRIBUTE(attributes, TPMA_NV, ORDERLY)    
               && (type == SU_RESET)))
            CLEAR_ATTRIBUTE(attributes, TPMA_NV, WRITTEN);
    }
    // Unlock any index that is not written or that does not have 
    // TPMA_NV_WRITEDEFINE SET.
    if(!IS_ATTRIBUTE(attributes, TPMA_NV, WRITTEN)    
       || !IS_ATTRIBUTE(attributes, TPMA_NV, WRITEDEFINE))
        CLEAR_ATTRIBUTE(attributes, TPMA_NV, WRITELOCKED);
    return attributes;
}

//*** NvEntityStartup()
//  This function is called at TPM_Startup(). If the startup completes
//  a TPM Resume cycle, no action is taken. If the startup is a TPM Reset
//  or a TPM Restart, then this function will:
//  a) clear read/write lock;
//  b) reset NV Index data that has TPMA_NV_CLEAR_STCLEAR SET; and
//  c) set the lower bits in orderly counters to 1 for a non-orderly startup
//
//  It is a prerequisite that NV be available for writing before this
//  function is called.
BOOL
NvEntityStartup(
    STARTUP_TYPE     type           // IN: start up type
    )
{
    NV_REF               iter = NV_REF_INIT;
    NV_RAM_REF           ramIter = NV_RAM_REF_INIT;
    NV_REF               currentAddr;        // offset points to the current entity
    NV_RAM_REF           currentRamAddr;
    TPM_HANDLE           nvHandle;
    TPMA_NV              attributes;
//
    // Restore RAM index data
    NvRead(s_indexOrderlyRam, NV_INDEX_RAM_DATA, sizeof(s_indexOrderlyRam));

    // Initialize the max NV counter value
    NvSetMaxCount(NvGetMaxCount());

    // If recovering from state save, do nothing else
    if(type == SU_RESUME)
        return TRUE;
    // Iterate all the NV Index to clear the locks
    while((currentAddr = NvNextIndex(&nvHandle, &iter)) != 0)
    {
        attributes = NvReadNvIndexAttributes(currentAddr);

        // If this is an orderly index, defer processing until loop below
        if(IS_ATTRIBUTE(attributes, TPMA_NV, ORDERLY))
            continue;
        // Set the attributes appropriate for this startup type
        attributes = NvSetStartupAttributes(attributes, type);
        NvWriteNvIndexAttributes(currentAddr, attributes);
    }
    // Iterate all the orderly indexes to clear the locks and initialize counters
    while((currentRamAddr = NvRamNext(&ramIter, NULL)) != 0)
    {
        attributes = NvReadRamIndexAttributes(currentRamAddr);

        attributes = NvSetStartupAttributes(attributes, type);

        // update attributes in RAM
        NvWriteRamIndexAttributes(currentRamAddr, attributes);

        // Set the lower bits in an orderly counter to 1 for a non-orderly startup
        if(IsNvCounterIndex(attributes) 
           && (g_prevOrderlyState == SU_NONE_VALUE))
        {
            UINT64      counter;
//
            // Read the counter value last saved to NV.
            counter = BYTE_ARRAY_TO_UINT64(currentRamAddr + sizeof(NV_RAM_HEADER));

            // Set the lower bits of counter to 1's
            counter |= MAX_ORDERLY_COUNT;

            // Write back to RAM
            // NOTE: Do not want to force a write to NV here. The counter value will
            // stay in RAM until the next shutdown or rollover.
            UINT64_TO_BYTE_ARRAY(counter, currentRamAddr + sizeof(NV_RAM_HEADER));
        }
    }
    return TRUE;
}

//*** NvCapGetCounterAvail()
// This function returns an estimate of the number of additional counter type
// NV indexes that can be defined.
UINT32
NvCapGetCounterAvail(
    void
    )
{
    UINT32          availNVSpace;
    UINT32          availRAMSpace;
    UINT32          persistentNum = NvCapGetPersistentNumber();
    UINT32          reserved = sizeof(NV_LIST_TERMINATOR);
//
    // Get the available space in NV storage
    availNVSpace = NvGetFreeBytes();

    if(persistentNum < MIN_EVICT_OBJECTS)
    {
        // Some space has to be reserved for evict object. Adjust availNVSpace.
        reserved += (MIN_EVICT_OBJECTS - persistentNum) * NV_EVICT_OBJECT_SIZE;
        if(reserved > availNVSpace)
            availNVSpace = 0;
        else
            availNVSpace -= reserved;
    }
    // Compute the available space in RAM
    availRAMSpace = (int)(RAM_ORDERLY_END - NvRamGetEnd());

    // Return the min of counter number in NV and in RAM
    if(availNVSpace / NV_INDEX_COUNTER_SIZE
        > availRAMSpace / NV_RAM_INDEX_COUNTER_SIZE)
        return availRAMSpace / NV_RAM_INDEX_COUNTER_SIZE;
    else
        return availNVSpace / NV_INDEX_COUNTER_SIZE;
}

//*** NvFindHandle()
// this function returns the offset in NV memory of the entity associated
// with the input handle.  A value of zero indicates that handle does not
//  exist reference an existing persistent object or defined NV Index.
NV_REF
NvFindHandle(
    TPM_HANDLE       handle
    )
{
    NV_REF           addr;
    NV_REF           iter = NV_REF_INIT;
    TPM_HANDLE       nextHandle;
//
    while((addr = NvNext(&iter, &nextHandle)) != 0)
    {
        if(nextHandle == handle)
            break;
    }
    return addr;
}

//** NV Max Counter
//*** Introduction
// The TPM keeps track of the highest value of a deleted counter index. When an
// index is deleted, this value is updated if the deleted counter index is greater
// than the previous value. When a new index is created and first incremented, it
// will get a value that is at least one greater than any other index than any
// previously deleted index. This insures that it is not possible to roll back an
// index.
//
// The highest counter value is kept in NV in a special end-of-list marker. This
// marker is only updated when an index is deleted. Otherwise it just moves.
//
// When the TPM starts up, it searches NV for the end of list marker and initializes
// an in memory value (s_maxCounter). 

//*** NvReadMaxCount()
// This function returns the max NV counter value.
//
UINT64
NvReadMaxCount(
    void
    )
{
    return s_maxCounter;
}

//*** NvUpdateMaxCount()
// This function updates the max counter value to NV memory. This is just staging
// for the actual write that will occur when the NV index memory is modified.
//
void
NvUpdateMaxCount(
    UINT64           count
    )
{
    if(count > s_maxCounter)
        s_maxCounter = count;
}

//*** NvSetMaxCount()
// This function is used at NV initialization time to set the initial value of
// the maximum counter.
void
NvSetMaxCount(
    UINT64          value
    )
{
    s_maxCounter = value;
}

//*** NvGetMaxCount()
// Function to get the NV max counter value from the end-of-list marker
UINT64
NvGetMaxCount(
    void
    )
{
    NV_REF               iter = NV_REF_INIT;
    NV_REF               currentAddr;
    UINT64               maxCount;
//
    // Find the end of list marker and initialize the NV Max Counter value.
    while((currentAddr = NvNext(&iter, NULL )) != 0);
    // 'iter' should be pointing at the end of list marker so read in the current
    // value of the s_maxCounter.
    NvRead(&maxCount, iter + sizeof(UINT32), sizeof(maxCount));

    return maxCount;
}