| # 0.4.4 (April 3, 2024) |
| |
| * Limit number of CONTINUATION frames for misbehaving connections. |
| |
| # 0.4.3 (March 15, 2024) |
| |
| * Fix flow control limits to not apply until receiving SETTINGS ack. |
| * Fix not returning an error if IO ended without `close_notify`. |
| * Improve performance of decoding many headers. |
| |
| # 0.4.2 (January 17th, 2024) |
| |
| * Limit error resets for misbehaving connections. |
| * Fix selecting MAX_CONCURRENT_STREAMS value if no value is advertised initially. |
| |
| # 0.4.1 (January 8, 2024) |
| |
| * Fix assigning connection capacity which could starve streams in some instances. |
| |
| # 0.4.0 (November 15, 2023) |
| |
| * Update to `http` 1.0. |
| * Remove deprecated `Server::poll_close()`. |
| |
| # 0.3.22 (November 15, 2023) |
| |
| * Add `header_table_size(usize)` option to client and server builders. |
| * Improve throughput when vectored IO is not available. |
| * Update indexmap to 2. |
| |
| # 0.3.21 (August 21, 2023) |
| |
| * Fix opening of new streams over peer's max concurrent limit. |
| * Fix `RecvStream` to return data even if it has received a `CANCEL` stream error. |
| * Update MSRV to 1.63. |
| |
| # 0.3.20 (June 26, 2023) |
| |
| * Fix panic if a server received a request with a `:status` pseudo header in the 1xx range. |
| * Fix panic if a reset stream had pending push promises that were more than allowed. |
| * Fix potential flow control overflow by subtraction, instead returning a connection error. |
| |
| # 0.3.19 (May 12, 2023) |
| |
| * Fix counting reset streams when triggered by a GOAWAY. |
| * Send `too_many_resets` in opaque debug data of GOAWAY when too many resets received. |
| |
| # 0.3.18 (April 17, 2023) |
| |
| * Fix panic because of opposite check in `is_remote_local()`. |
| |
| # 0.3.17 (April 13, 2023) |
| |
| * Add `Error::is_library()` method to check if the originated inside `h2`. |
| * Add `max_pending_accept_reset_streams(usize)` option to client and server |
| builders. |
| * Fix theoretical memory growth when receiving too many HEADERS and then |
| RST_STREAM frames faster than an application can accept them off the queue. |
| (CVE-2023-26964) |
| |
| # 0.3.16 (February 27, 2023) |
| |
| * Set `Protocol` extension on requests when received Extended CONNECT requests. |
| * Remove `B: Unpin + 'static` bound requiremented of bufs |
| * Fix releasing of frames when stream is finished, reducing memory usage. |
| * Fix panic when trying to send data and connection window is available, but stream window is not. |
| * Fix spurious wakeups when stream capacity is not available. |
| |
| # 0.3.15 (October 21, 2022) |
| |
| * Remove `B: Buf` bound on `SendStream`'s parameter |
| * add accessor for `StreamId` u32 |
| |
| # 0.3.14 (August 16, 2022) |
| |
| * Add `Error::is_reset` function. |
| * Bump MSRV to Rust 1.56. |
| * Return `RST_STREAM(NO_ERROR)` when the server early responds. |
| |
| # 0.3.13 (March 31, 2022) |
| |
| * Update private internal `tokio-util` dependency. |
| |
| # 0.3.12 (March 9, 2022) |
| |
| * Avoid time operations that can panic (#599) |
| * Bump MSRV to Rust 1.49 (#606) |
| * Fix header decoding error when a header name is contained at a continuation |
| header boundary (#589) |
| * Remove I/O type names from handshake `tracing` spans (#608) |
| |
| # 0.3.11 (January 26, 2022) |
| |
| * Make `SendStream::poll_capacity` never return `Ok(Some(0))` (#596) |
| * Fix panic when receiving already reset push promise (#597) |
| |
| # 0.3.10 (January 6, 2022) |
| |
| * Add `Error::is_go_away()` and `Error::is_remote()` methods. |
| * Fix panic if receiving malformed PUSH_PROMISE with stream ID of 0. |
| |
| # 0.3.9 (December 9, 2021) |
| |
| * Fix hang related to new `max_send_buffer_size`. |
| |
| # 0.3.8 (December 8, 2021) |
| |
| * Add "extended CONNECT support". Adds `h2::ext::Protocol`, which is used for request and response extensions to connect new protocols over an HTTP/2 stream. |
| * Add `max_send_buffer_size` options to client and server builders, and a default of ~400MB. This acts like a high-water mark for the `poll_capacity()` method. |
| * Fix panic if receiving malformed HEADERS with stream ID of 0. |
| |
| # 0.3.7 (October 22, 2021) |
| |
| * Fix panic if server sends a malformed frame on a stream client was about to open. |
| * Fix server to treat `:status` in a request as a stream error instead of connection error. |
| |
| # 0.3.6 (September 30, 2021) |
| |
| * Fix regression of `h2::Error` that were created via `From<h2::Reason>` not returning their reason code in `Error::reason()`. |
| |
| # 0.3.5 (September 29, 2021) |
| |
| * Fix sending of very large headers. Previously when a single header was too big to fit in a single `HEADERS` frame, an error was returned. Now it is broken up and sent correctly. |
| * Fix buffered data field to be a bigger integer size. |
| * Refactor error format to include what initiated the error (remote, local, or user), if it was a stream or connection-level error, and any received debug data. |
| |
| # 0.3.4 (August 20, 2021) |
| |
| * Fix panic when encoding header size update over a certain size. |
| * Fix `SendRequest` to wake up connection when dropped. |
| * Fix potential hang if `RecvStream` is placed in the request or response `extensions`. |
| * Stop calling `Instant::now` if zero reset streams are configured. |
| |
| # 0.3.3 (April 29, 2021) |
| |
| * Fix client being able to make `CONNECT` requests without a `:path`. |
| * Expose `RecvStream::poll_data`. |
| * Fix some docs. |
| |
| # 0.3.2 (March 24, 2021) |
| |
| * Fix incorrect handling of received 1xx responses on the client when the request body is still streaming. |
| |
| # 0.3.1 (February 26, 2021) |
| |
| * Add `Connection::max_concurrent_recv_streams()` getter. |
| * Add `Connection::max_concurrent_send_streams()` getter. |
| * Fix client to ignore receipt of 1xx headers frames. |
| * Fix incorrect calculation of pseudo header lengths when determining if a received header is too big. |
| * Reduce monomorphized code size of internal code. |
| |
| # 0.3.0 (December 23, 2020) |
| |
| * Update to Tokio v1 and Bytes v1. |
| * Disable `tracing`'s `log` feature. (It can still be enabled by a user in their own `Cargo.toml`.) |
| |
| # 0.2.7 (October 22, 2020) |
| |
| * Fix stream ref count when sending a push promise |
| * Fix receiving empty DATA frames in response to a HEAD request |
| * Fix handling of client disabling SERVER_PUSH |
| |
| # 0.2.6 (July 13, 2020) |
| |
| * Integrate `tracing` directly where `log` was used. (For 0.2.x, `log`s are still emitted by default.) |
| |
| # 0.2.5 (May 6, 2020) |
| |
| * Fix rare debug assert failure in store shutdown. |
| |
| # 0.2.4 (March 30, 2020) |
| |
| * Fix when receiving `SETTINGS_HEADER_TABLE_SIZE` setting. |
| |
| # 0.2.3 (March 25, 2020) |
| |
| * Fix server being able to accept `CONNECT` requests without `:scheme` or `:path`. |
| * Fix receiving a GOAWAY frame from updating the recv max ID, it should only update max send ID. |
| |
| # 0.2.2 (March 3, 2020) |
| |
| * Reduce size of `FlowControl` and `RecvStream`. |
| |
| # 0.2.1 (December 6, 2019) |
| |
| * Relax `Unpin` bounds on the send `Buf` generic. |
| |
| # 0.2.0 (December 3, 2019) |
| |
| * Add `server::Connection::set_initial_window_size` and `client::Connection::set_initial_window_size` which can adjust the `INITIAL_WINDOW_SIZE` setting on an existing connection (#421). |
| * Update to `http` v0.2. |
| * Update to `tokio` v0.2. |
| * Change `unstable-stream` feature to `stream`. |
| * Change `ReserveCapacity` to `FlowControl` (#423). |
| * Remove `From<io::Error>` for `Error`. |
| |
| # 0.2.0-alpha.3 (October 1, 2019) |
| |
| * Update to futures `0.3.0-alpha.19`. |
| * Update to tokio `0.2.0-alpha.6`. |
| |
| # 0.2.0-alpha.2 (September 20, 2019) |
| |
| * Add server support for `PUSH_PROMISE`s (#327). |
| * Update to tokio `0.2.0-alpha.5`. |
| * Change `stream` feature to `unstable-stream`. |
| |
| # 0.2.0-alpha.1 (August 30, 2019) |
| |
| * Update from `futures` 0.1 to `std::future::Future`. |
| * Update `AsyncRead`/`AsyncWrite` to `tokio-io` 0.2 alpha. |
| * Change `Stream` implementations to be optional, default disabled. Specific async and poll functions are now inherent, and `Stream` can be re-enabled with the `stream` cargo feature. |
| |
| # 0.1.25 (June 28, 2019) |
| |
| * Fix to send a `RST_STREAM` instead of `GOAWAY` if receiving a frame on a previously closed stream. |
| * Fix receiving trailers without an end-stream flag to be a stream error instead of connection error. |
| |
| # 0.1.24 (June 17, 2019) |
| |
| * Fix server wrongly rejecting requests that don't have an `:authority` header (#372). |
| |
| # 0.1.23 (June 4, 2019) |
| |
| * Fix leaking of received DATA frames if the `RecvStream` is never polled (#368). |
| |
| # 0.1.22 (June 3, 2019) |
| |
| * Fix rare panic when remote sends `RST_STREAM` or `GOAWAY` for a stream pending window capacity (#364). |
| |
| # 0.1.21 (May 30, 2019) |
| |
| * Fix write loop when a header didn't fit in write buffer. |
| |
| # 0.1.20 (May 16, 2019) |
| |
| * Fix lifetime conflict for older compilers. |
| |
| # 0.1.19 (May 15, 2019) |
| |
| * Fix rare crash if `CONTINUATION` frame resumed in the middle of headers with the same name. |
| * Fix HPACK encoder using an old evicted index for repeated header names. |
| |
| # 0.1.18 (April 9, 2019) |
| |
| * Fix `server::Connection::abrupt_shutdown` to no longer return the same error the user sent (#352). |
| |
| # 0.1.17 (March 12, 2019) |
| |
| * Add user PING support (#346). |
| * Fix notifying a `RecvStream` task if locally sending a reset. |
| * Fix connections "hanging" when all handles are dropped but some streams had been reset. |
| |
| # 0.1.16 (January 24, 2019) |
| |
| * Log header values when malformed (#342). |
| |
| # 0.1.15 (January 12, 2019) |
| |
| * Fix race condition bug related to shutting down the client (#338). |
| |
| # 0.1.14 (December 5, 2018) |
| |
| * Fix closed streams to always return window capacity to the connection (#334). |
| * Fix locking when `Debug` printing an `OpaqueStreamRef` (#333). |
| * Fix inverted split for DATA frame padding (#330). |
| * Reduce `Debug` noise for `Frame` (#329). |
| |
| # 0.1.13 (October 16, 2018) |
| |
| * Add client support for Push Promises (#314). |
| * Expose `io::Error` from `h2::Error` (#311) |
| * Misc bug fixes (#304, #309, #319, #313, #320). |
| |
| # 0.1.12 (August 8, 2018) |
| |
| * Fix initial send window size (#301). |
| * Fix panic when calling `reserve_capacity` after connection has been closed (#302). |
| * Fix handling of incoming `SETTINGS_INITIAL_WINDOW_SIZE`. (#299) |
| |
| # 0.1.11 (July 31, 2018) |
| |
| * Add `stream_id` accessors to public API types (#292). |
| * Fix potential panic when dropping clients (#295). |
| * Fix busy loop when shutting down server (#296). |
| |
| # 0.1.10 (June 15, 2018) |
| |
| * Fix potential panic in `SendRequest::poll_ready()` (#281). |
| * Fix infinite loop on reset connection during prefix (#285). |
| |
| # 0.1.9 (May 31, 2018) |
| |
| * Add `poll_reset` to `SendResponse` and `SendStream` (#279). |
| |
| # 0.1.8 (May 23, 2018) |
| |
| * Fix client bug when max streams is reached. (#277) |
| |
| # 0.1.7 (May 14, 2018) |
| |
| * Misc bug fixes (#266, #273, #261, #275). |
| |
| # 0.1.6 (April 24, 2018) |
| |
| * Misc bug fixes related to stream management (#258, #260, #262). |
| |
| # 0.1.5 (April 6, 2018) |
| |
| * Fix the `last_stream_id` sent during graceful GOAWAY (#254). |
| |
| # 0.1.4 (April 5, 2018) |
| |
| * Add `initial_connection_window_size` to client and server `Builder`s (#249). |
| * Add `graceful_shutdown` and `abrupt_shutdown` to `server::Connection`, |
| deprecating `close_connection` (#250). |
| |
| # 0.1.3 (March 28, 2018) |
| |
| * Allow configuring max streams before the peer's settings frame is |
| received (#242). |
| * Fix HPACK decoding bug with regards to large literals (#244). |
| * Fix state transition bug triggered by receiving a RST_STREAM frame (#247). |
| |
| # 0.1.2 (March 13, 2018) |
| |
| * Fix another bug relating to resetting connections and reaching |
| max concurrency (#238). |
| |
| # 0.1.1 (March 8, 2018) |
| |
| * When streams are dropped, close the connection (#222). |
| * Notify send tasks on connection error (#231). |
| * Fix bug relating to resetting connections and reaching max concurrency (#235). |
| * Normalize HTTP request path to satisfy HTTP/2.0 specification (#228). |
| * Update internal dependencies. |
| |
| # 0.1.0 (Jan 12, 2018) |
| |
| * Initial release |
