# Chester Cheng <snowlet.cheng@gmail.com>, 2016. #zanata
# Petr Lautrbach <plautrba@fedoraproject.org>, 2016. #zanata
# Cheng-Chia Tseng <pswo10680@gmail.com>, 2017. #zanata
# Vit Mojzis <vmojzis@redhat.com>, 2017. #zanata
# Ludek Janda <ljanda@redhat.com>, 2018. #zanata
msgid ""
msgstr ""
"Project-Id-Version: PACKAGE VERSION\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2022-08-30 22:52+0200\n"
"PO-Revision-Date: 2018-11-20 10:25-0500\n"
"Last-Translator: Copied by Zanata <copied-by-zanata@zanata.org>\n"
"Language-Team: Chinese (Taiwan)\n"
"Language: zh_TW\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=1; plural=0\n"
"X-Generator: Zanata 4.6.2\n"

#: ../audit2allow/audit2allow:239
msgid "******************** IMPORTANT ***********************\n"
msgstr "******************** 重要 ***********************\n"

#: ../audit2allow/audit2allow:240
#, python-format
msgid ""
"To make this policy package active, execute:\n"
"\n"
"semodule -i %s\n"
"\n"
msgstr ""
"要使此策略包處於活動狀態，請執行：semodule -i %s\n"
"\n"

#: ../chcat/chcat:111 ../chcat/chcat:191
msgid "Requires at least one category"
msgstr "需要至少一個分類"

#: ../chcat/chcat:124 ../chcat/chcat:205
#, python-format
msgid "Can not modify sensitivity levels using '+' on %s"
msgstr "無法在 %s 上使用「+」來修改敏感等級。"

#: ../chcat/chcat:128
#, python-format
msgid "%s is already in %s"
msgstr "%s 已經在 %s 中執行"

#: ../chcat/chcat:210 ../chcat/chcat:220
#, python-format
msgid "%s is not in %s"
msgstr "%s 不在 %s 中"

#: ../chcat/chcat:291 ../chcat/chcat:296
msgid "Can not combine +/- with other types of categories"
msgstr "+/- 不能與其他類別結合"

#: ../chcat/chcat:346
msgid "Can not have multiple sensitivities"
msgstr "不能擁有多種敏感度"

#: ../chcat/chcat:353
#, python-format
msgid "Usage %s CATEGORY File ..."
msgstr "使用 %s CATEGORY 檔案..."

#: ../chcat/chcat:354
#, python-format
msgid "Usage %s -l CATEGORY user ..."
msgstr "用法 %s -l CATEGORY user ..."

#: ../chcat/chcat:355
#, python-format
msgid "Usage %s [[+|-]CATEGORY],...] File ..."
msgstr "用法 %s [[+|-]CATEGORY],...] File ..."

#: ../chcat/chcat:356
#, python-format
msgid "Usage %s -l [[+|-]CATEGORY],...] user ..."
msgstr "用法 %s -l [[+|-]CATEGORY],...] user ..."

#: ../chcat/chcat:357
#, python-format
msgid "Usage %s -d File ..."
msgstr "用法 %s -d File ..."

#: ../chcat/chcat:358
#, python-format
msgid "Usage %s -l -d user ..."
msgstr "用法 %s -l -d user ..."

#: ../chcat/chcat:359
#, python-format
msgid "Usage %s -L"
msgstr "用法 %s -L"

#: ../chcat/chcat:360
#, python-format
msgid "Usage %s -L -l user"
msgstr "用法 %s -L -l user"

#: ../chcat/chcat:361
msgid "Use -- to end option list.  For example"
msgstr "用法 -- 表示選項清單的結尾。例如"

#: ../chcat/chcat:362
msgid "chcat -- -CompanyConfidential /docs/businessplan.odt"
msgstr "chcat -- -CompanyConfidential /docs/businessplan.odt"

#: ../chcat/chcat:363
msgid "chcat -l +CompanyConfidential juser"
msgstr "chcat -l +CompanyConfidential juser"

#: ../chcat/chcat:433
#, python-format
msgid "Options Error %s "
msgstr "選項錯誤 %s"

#: ../semanage/semanage:209
msgid "Select an alternate SELinux Policy Store to manage"
msgstr "選擇要管理的備用SELinux策略存儲"

#: ../semanage/semanage:213
msgid "Select a priority for module operations"
msgstr "選擇模塊操作的優先級"

#: ../semanage/semanage:217
#, python-format
msgid "Do not print heading when listing %s object types"
msgstr "列出時不要打印標題 %s 對像類型"

#: ../semanage/semanage:221
msgid "Do not reload policy after commit"
msgstr "提交後不要重新加載策略"

#: ../semanage/semanage:225
#, python-format
msgid "List %s local customizations"
msgstr "名單 %s 本地自定義"

#: ../semanage/semanage:229
#, python-format
msgid "Add a record of the %s object type"
msgstr "添加記錄 %s 對像類型"

#: ../semanage/semanage:233
msgid "SELinux Type for the object"
msgstr "SELinux類型為對象"

#: ../semanage/semanage:237
msgid ""
"Default SELinux Level for SELinux user, s0 Default. (MLS/MCS Systems only)"
msgstr "SELinux用戶的默認SELinux級別，s0默認值。 （僅限MLS / MCS系統）"

#: ../semanage/semanage:242
msgid ""
"\n"
"MLS/MCS Security Range (MLS/MCS Systems only)\n"
"SELinux Range  for SELinux login mapping\n"
"defaults to the SELinux user record range.\n"
"SELinux Range for SELinux user defaults to s0.\n"
msgstr ""
"\n"
"MLS / MCS安全範圍（僅限MLS / MCS系統）SELinux用於SELinux登錄映射的範圍默認為​​"
"SELinux用戶記錄範圍。 SELinux用戶的SELinux範圍默認為​​s0。\n"

#: ../semanage/semanage:251
#, fuzzy
#| msgid ""
#| "\n"
#| "    Protocol  for  the specified port (tcp|udp) or internet protocol\n"
#| "    version for the specified node (ipv4|ipv6).\n"
msgid ""
"\n"
"    Protocol  for  the specified port (tcp|udp|dccp|sctp) or internet "
"protocol\n"
"    version for the specified node (ipv4|ipv6).\n"
msgstr ""
"\n"
"    指定節點（ipv4 | ipv6）的指定端口（tcp | udp）或Internet協議版本的協"
"議。\n"

#: ../semanage/semanage:257
msgid ""
"\n"
"    Subnet prefix for  the specified infiniband ibpkey.\n"
msgstr ""
"\n"
"    指定的infiniband ibpkey的子網前綴。\n"

#: ../semanage/semanage:262
msgid ""
"\n"
"    Name for the specified infiniband end port.\n"
msgstr ""
"\n"
"    指定的infiniband端口的名稱。\n"

#: ../semanage/semanage:267
#, python-format
msgid "Modify a record of the %s object type"
msgstr "修改記錄 %s 對像類型"

#: ../semanage/semanage:271
#, python-format
msgid "List records of the %s object type"
msgstr "列出記錄 %s 對像類型"

#: ../semanage/semanage:275
#, python-format
msgid "Delete a record of the %s object type"
msgstr "刪除記錄 %s 對像類型"

#: ../semanage/semanage:279
msgid "Extract customizable commands, for use within a transaction"
msgstr "提取可自定義的命令，以便在事務中使用"

#: ../semanage/semanage:283
#, python-format
msgid "Remove all %s objects local customizations"
msgstr "移除所有 %s 對象本地自定義"

#: ../semanage/semanage:287
msgid "SELinux user name"
msgstr "SELinux用戶名"

#: ../semanage/semanage:292
msgid "Manage login mappings between linux users and SELinux confined users"
msgstr "管理linux用戶和SELinux受限用戶之間的登錄映射"

#: ../semanage/semanage:309
#, python-format
msgid "login_name | %%groupname"
msgstr "login_name | %%groupname"

#: ../semanage/semanage:361
msgid "Manage file context mapping definitions"
msgstr "管理文件上下文映射定義"

#: ../semanage/semanage:375
msgid ""
"Substitute  target  path with sourcepath when generating default\n"
"                                                                  label.  "
"This is used with fcontext. Requires source  and  target\n"
"                                                                  path  "
"arguments.  The context labeling for the target subtree is\n"
"                                                                  made "
"equivalent to that defined for the source."
msgstr ""
"生成默認標籤時，使用sourcepath替換目標路徑。這與fcontext一起使用。需要源和目"
"標路徑參數。目標子樹的上下文標記等效於為源定義的上下文標記。"

#: ../semanage/semanage:383
msgid ""
"Path to be labeled (may be in the form of a Perl compatible regular "
"expression)"
msgstr ""

#: ../semanage/semanage:411
msgid "Manage SELinux confined users (Roles and levels for an SELinux user)"
msgstr "管理SELinux受限用戶（SELinux用戶的角色和級別）"

#: ../semanage/semanage:429
msgid ""
"\n"
"SELinux Roles.  You must enclose multiple roles within quotes, separate by "
"spaces. Or specify -R multiple times.\n"
msgstr ""

#: ../semanage/semanage:433
msgid "selinux_name"
msgstr "selinux_name"

#: ../semanage/semanage:461
msgid "Manage network port type definitions"
msgstr "管理網絡端口類型定義"

#: ../semanage/semanage:477
msgid "port | port_range"
msgstr "港口| port_range"

#: ../semanage/semanage:506
msgid "Manage infiniband ibpkey type definitions"
msgstr "管理infiniband ibpkey類型定義"

#: ../semanage/semanage:522
msgid "pkey | pkey_range"
msgstr "pkey | pkey_range"

#: ../semanage/semanage:549
msgid "Manage infiniband end port type definitions"
msgstr "管理infiniband端口類型定義"

#: ../semanage/semanage:565
msgid "ibendport"
msgstr "ibendport"

#: ../semanage/semanage:592
msgid "Manage network interface type definitions"
msgstr "管理網絡接口類型定義"

#: ../semanage/semanage:607
msgid "interface_spec"
msgstr "interface_spec"

#: ../semanage/semanage:631
msgid "Manage SELinux policy modules"
msgstr "管理SELinux策略模塊"

#: ../semanage/semanage:642
msgid "Add a module"
msgstr ""

#: ../semanage/semanage:643
msgid "Remove a module"
msgstr "刪除模塊"

#: ../semanage/semanage:644
msgid "Disable a module"
msgstr "禁用模塊"

#: ../semanage/semanage:645
msgid "Enable a module"
msgstr "啟用模塊"

#: ../semanage/semanage:672
msgid "Manage network node type definitions"
msgstr "管理網絡節點類型定義"

#: ../semanage/semanage:686
msgid "Network Mask"
msgstr "網絡掩碼"

#: ../semanage/semanage:690
msgid "node"
msgstr "節點"

#: ../semanage/semanage:715
msgid "Manage booleans to selectively enable functionality"
msgstr "管理布爾值以有選擇地啟用功能"

#: ../semanage/semanage:720
msgid "boolean"
msgstr "布林值"

#: ../semanage/semanage:730
msgid "Enable the boolean"
msgstr "啟用布爾值"

#: ../semanage/semanage:731
msgid "Disable the boolean"
msgstr "禁用布爾值"

#: ../semanage/semanage:752
msgid "semanage permissive: error: the following argument is required: type\n"
msgstr "semanage permissive：error：需要以下參數：type\n"

#: ../semanage/semanage:756
msgid "Manage process type enforcement mode"
msgstr "管理流程類型執行模式"

#: ../semanage/semanage:768 ../semanage/seobject.py:2674
msgid "type"
msgstr "類型"

#: ../semanage/semanage:779
msgid "Disable/Enable dontaudit rules in policy"
msgstr "禁用/啟用策略中的dontaudit規則"

#: ../semanage/semanage:799
msgid "Output local customizations"
msgstr "輸出本地自定義"

#: ../semanage/semanage:801
msgid "Output file"
msgstr "輸出檔案"

#: ../semanage/semanage:894
msgid "Import local customizations"
msgstr "導入本地自定義"

#: ../semanage/semanage:897
msgid "Input file"
msgstr "輸入文件"

#: ../semanage/seobject.py:279
msgid "Could not create semanage handle"
msgstr "無法建立 semanage 控制"

#: ../semanage/seobject.py:287
msgid "SELinux policy is not managed or store cannot be accessed."
msgstr "SELinux 方針無法管理，或無法存取儲存處。"

#: ../semanage/seobject.py:292
msgid "Cannot read policy store."
msgstr "無法讀取方針儲存處。"

#: ../semanage/seobject.py:297
msgid "Could not establish semanage connection"
msgstr "無法建立 semanage 連線"

#: ../semanage/seobject.py:302
msgid "Could not test MLS enabled status"
msgstr "無法測試 MLS 啟用狀態"

#: ../semanage/seobject.py:308 ../semanage/seobject.py:324
msgid "Not yet implemented"
msgstr "尚未實作"

#: ../semanage/seobject.py:312
msgid "Semanage transaction already in progress"
msgstr "Semanage 處理事項正在進行中"

#: ../semanage/seobject.py:321
msgid "Could not start semanage transaction"
msgstr "無法起始 semanage 處理事項"

#: ../semanage/seobject.py:335
msgid "Could not commit semanage transaction"
msgstr "無法提交 semanage 處理事項"

#: ../semanage/seobject.py:340
msgid "Semanage transaction not in progress"
msgstr "Semanage 處理事項沒有進行"

#: ../semanage/seobject.py:354 ../semanage/seobject.py:474
msgid "Could not list SELinux modules"
msgstr "無法列出 SELinux 模組"

#: ../semanage/seobject.py:361
msgid "Could not get module name"
msgstr "無法取得模組名稱"

#: ../semanage/seobject.py:365
msgid "Could not get module enabled"
msgstr "無法啟用模組"

#: ../semanage/seobject.py:369
msgid "Could not get module priority"
msgstr "無法取得模組的優先順序"

#: ../semanage/seobject.py:373
msgid "Could not get module lang_ext"
msgstr "無法取得模組的 lang_ext"

#: ../semanage/seobject.py:394
msgid "Module Name"
msgstr "模組名稱"

#: ../semanage/seobject.py:394
msgid "Priority"
msgstr "優先順序"

#: ../semanage/seobject.py:394
msgid "Language"
msgstr "語言"

#: ../semanage/seobject.py:397 ../sepolicy/sepolicy/sepolicy.glade:3421
msgid "Disabled"
msgstr "已停用"

#: ../semanage/seobject.py:406
#, python-format
msgid "Module does not exist: %s "
msgstr "模塊不存在： %s "

#: ../semanage/seobject.py:410 ../semanage/seobject.py:437
#, python-format
msgid "Invalid priority %d (needs to be between 1 and 999)"
msgstr "不合乎規定的優先順序 %d（必須是 1 與 999 之間的值）"

#: ../semanage/seobject.py:420
msgid "Could not create module key"
msgstr "無法建立模組金鑰"

#: ../semanage/seobject.py:424
msgid "Could not set module key name"
msgstr "無法設定模組金鑰名稱"

#: ../semanage/seobject.py:429
#, python-format
msgid "Could not enable module %s"
msgstr "無法啟用 %s 模組"

#: ../semanage/seobject.py:431
#, python-format
msgid "Could not disable module %s"
msgstr "無法停用 %s 模組"

#: ../semanage/seobject.py:442
#, python-format
msgid "Could not remove module %s (remove failed)"
msgstr "無法移除 %s 模組（移除失敗）"

#: ../semanage/seobject.py:459
msgid "dontaudit requires either 'on' or 'off'"
msgstr "dontaudit 必須要是「on」或「off」"

#: ../semanage/seobject.py:492
msgid "Builtin Permissive Types"
msgstr "內建寬容類型"

#: ../semanage/seobject.py:502
msgid "Customized Permissive Types"
msgstr "自訂寬容類型"

#: ../semanage/seobject.py:510
msgid ""
"The sepolgen python module is required to setup permissive domains.\n"
"In some distributions it is included in the policycoreutils-devel package.\n"
"# yum install policycoreutils-devel\n"
"Or similar for your distro."
msgstr ""
"sepolgen python模塊需要設置許可域。在某些發行版中，它包含在policycoreutils-"
"devel包中。 #yum install policycoreutils-devel或類似的發行版。"

#: ../semanage/seobject.py:520
#, python-format
msgid "Could not set permissive domain %s (module installation failed)"
msgstr "無法設定寬容區域 %s（模組安裝失敗）"

#: ../semanage/seobject.py:526
#, python-format
msgid "Could not remove permissive domain %s (remove failed)"
msgstr "無法移除寬容區域 %s（移除失敗）"

#: ../semanage/seobject.py:563 ../semanage/seobject.py:633
#: ../semanage/seobject.py:678 ../semanage/seobject.py:797
#: ../semanage/seobject.py:827 ../semanage/seobject.py:892
#: ../semanage/seobject.py:948 ../semanage/seobject.py:1226
#: ../semanage/seobject.py:1492 ../semanage/seobject.py:2502
#: ../semanage/seobject.py:2572 ../semanage/seobject.py:2596
#: ../semanage/seobject.py:2727 ../semanage/seobject.py:2778
#, python-format
msgid "Could not create a key for %s"
msgstr "無法為 %s 建立金鑰"

#: ../semanage/seobject.py:567 ../semanage/seobject.py:637
#: ../semanage/seobject.py:682 ../semanage/seobject.py:688
#, python-format
msgid "Could not check if login mapping for %s is defined"
msgstr "無法檢查 %s 的登入對映是否已經定義"

#: ../semanage/seobject.py:569
#, python-format
msgid "Login mapping for %s is already defined"
msgstr "登錄映射 %s 已定義"

#: ../semanage/seobject.py:574
#, python-format
msgid "Linux Group %s does not exist"
msgstr "Linux 群組 %s 不存在"

#: ../semanage/seobject.py:579
#, python-format
msgid "Linux User %s does not exist"
msgstr "Linux 使用者 %s 不存在"

#: ../semanage/seobject.py:583
#, python-format
msgid "Could not create login mapping for %s"
msgstr "無法為 %s 建立登入對映"

#: ../semanage/seobject.py:587 ../semanage/seobject.py:841
#, python-format
msgid "Could not set name for %s"
msgstr "無法為 %s 設定名稱"

#: ../semanage/seobject.py:592 ../semanage/seobject.py:851
#, python-format
msgid "Could not set MLS range for %s"
msgstr "無法為 %s 設定 MLS 範圍"

#: ../semanage/seobject.py:596
#, python-format
msgid "Could not set SELinux user for %s"
msgstr "無法為 %s 設定 SELinux 使用者"

#: ../semanage/seobject.py:600
#, python-format
msgid "Could not add login mapping for %s"
msgstr "無法為 %s 新增登入對映"

#: ../semanage/seobject.py:616
msgid "Requires seuser or serange"
msgstr "需要 seuser 或 serange"

#: ../semanage/seobject.py:639 ../semanage/seobject.py:684
#, python-format
msgid "Login mapping for %s is not defined"
msgstr "%s 的登入對映並未定義"

#: ../semanage/seobject.py:643
#, python-format
msgid "Could not query seuser for %s"
msgstr "無法為 %s 查詢 seuser"

#: ../semanage/seobject.py:658
#, python-format
msgid "Could not modify login mapping for %s"
msgstr "無法為 %s 修改登入對映"

#: ../semanage/seobject.py:690
#, python-format
msgid "Login mapping for %s is defined in policy, cannot be deleted"
msgstr "%s 的登入對映定義在方針中，無法刪除"

#: ../semanage/seobject.py:694
#, python-format
msgid "Could not delete login mapping for %s"
msgstr "無法為 %s 刪除登入對映"

#: ../semanage/seobject.py:713 ../semanage/seobject.py:745
#: ../semanage/seobject.py:991
msgid "Could not list login mappings"
msgstr "無法列出登入對映"

#: ../semanage/seobject.py:772 ../semanage/seobject.py:784
#: ../sepolicy/sepolicy/sepolicy.glade:1162
#: ../sepolicy/sepolicy/sepolicy.glade:3146
msgid "Login Name"
msgstr "登入名稱"

#: ../semanage/seobject.py:772 ../semanage/seobject.py:784
#: ../semanage/seobject.py:1041 ../semanage/seobject.py:1046
#: ../sepolicy/sepolicy/sepolicy.glade:1188
#: ../sepolicy/sepolicy/sepolicy.glade:3164
#: ../sepolicy/sepolicy/sepolicy.glade:3250
#: ../sepolicy/sepolicy/sepolicy.glade:4905
msgid "SELinux User"
msgstr "SELinux 使用者"

#: ../semanage/seobject.py:772
msgid "MLS/MCS Range"
msgstr "MLS/MCS 範圍"

#: ../semanage/seobject.py:772
msgid "Service"
msgstr "服務"

#: ../semanage/seobject.py:800 ../semanage/seobject.py:831
#: ../semanage/seobject.py:896 ../semanage/seobject.py:952
#: ../semanage/seobject.py:958
#, python-format
msgid "Could not check if SELinux user %s is defined"
msgstr "無法檢查 SELinux 使用者 %s 是否已經定義"

#: ../semanage/seobject.py:803 ../semanage/seobject.py:902
#: ../semanage/seobject.py:964
#, python-format
msgid "Could not query user for %s"
msgstr "無法為 %s 查詢使用者"

#: ../semanage/seobject.py:823
#, python-format
msgid "You must add at least one role for %s"
msgstr "您必須為 %s 新增至少一個角色"

#: ../semanage/seobject.py:833
#, python-format
msgid "SELinux user %s is already defined"
msgstr "SELinux用戶 %s 已定義"

#: ../semanage/seobject.py:837
#, python-format
msgid "Could not create SELinux user for %s"
msgstr "無法為 %s 建立 SELinux 使用者"

#: ../semanage/seobject.py:846
#, python-format
msgid "Could not add role %s for %s"
msgstr "無法新增角色 %s 給 %s"

#: ../semanage/seobject.py:855
#, python-format
msgid "Could not set MLS level for %s"
msgstr "無法為 %s 設定 MLS 等級"

#: ../semanage/seobject.py:858
#, python-format
msgid "Could not add prefix %s for %s"
msgstr "無法新增前綴 %s 給 %s"

#: ../semanage/seobject.py:861
#, python-format
msgid "Could not extract key for %s"
msgstr "無法為 %s 擷取金鑰"

#: ../semanage/seobject.py:865
#, python-format
msgid "Could not add SELinux user %s"
msgstr "無法新增 SELinux 使用者 %s"

#: ../semanage/seobject.py:886
msgid "Requires prefix, roles, level or range"
msgstr "需要前綴、角色、等級或範圍"

#: ../semanage/seobject.py:888
msgid "Requires prefix or roles"
msgstr "需要前綴或角色"

#: ../semanage/seobject.py:898 ../semanage/seobject.py:954
#, python-format
msgid "SELinux user %s is not defined"
msgstr "SELinux 使用者 %s 未定義"

#: ../semanage/seobject.py:927
#, python-format
msgid "Could not modify SELinux user %s"
msgstr "無法修改 SELinux 使用者 %s"

#: ../semanage/seobject.py:960
#, python-format
msgid "SELinux user %s is defined in policy, cannot be deleted"
msgstr "SELinux 使用者 %s 定義在方針中，無法刪除"

#: ../semanage/seobject.py:971
#, python-format
msgid "Could not delete SELinux user %s"
msgstr "無法刪除 SELinux 使用者 %s"

#: ../semanage/seobject.py:1009
msgid "Could not list SELinux users"
msgstr "無法列出 SELinux 使用者"

#: ../semanage/seobject.py:1015
#, python-format
msgid "Could not list roles for user %s"
msgstr "無法列出使用者 %s 的角色"

#: ../semanage/seobject.py:1040
msgid "Labeling"
msgstr "標記"

#: ../semanage/seobject.py:1040
msgid "MLS/"
msgstr "MLS/"

#: ../semanage/seobject.py:1041
msgid "Prefix"
msgstr "前綴字元"

#: ../semanage/seobject.py:1041
msgid "MCS Level"
msgstr "MCS 等級"

#: ../semanage/seobject.py:1041
msgid "MCS Range"
msgstr "MCS 範圍"

#: ../semanage/seobject.py:1041 ../semanage/seobject.py:1046
#: ../sepolicy/sepolicy/sepolicy.glade:3270
#: ../sepolicy/sepolicy/sepolicy.glade:5241
#: ../sepolicy/sepolicy/sepolicy.glade:5390
msgid "SELinux Roles"
msgstr "SELinux 角色"

#: ../semanage/seobject.py:1071
msgid "Protocol has to be one of udp, tcp, dccp or sctp"
msgstr ""

#: ../semanage/seobject.py:1073
msgid "Port is required"
msgstr "需要連接埠"

#: ../semanage/seobject.py:1087
msgid "Invalid Port"
msgstr "無效的連接埠"

#: ../semanage/seobject.py:1091 ../semanage/seobject.py:1365
#, python-format
msgid "Could not create a key for %s/%s"
msgstr "無法為 %s/%s 建立金鑰"

#: ../semanage/seobject.py:1102 ../semanage/seobject.py:1376
#: ../semanage/seobject.py:1631
msgid "Type is required"
msgstr "需要類型"

#: ../semanage/seobject.py:1107 ../semanage/seobject.py:1172
#, python-format
msgid "Type %s is invalid, must be a port type"
msgstr "類型 %s 無效，此類型必須是連接埠"

#: ../semanage/seobject.py:1113 ../semanage/seobject.py:1178
#: ../semanage/seobject.py:1244 ../semanage/seobject.py:1250
#, python-format
msgid "Could not check if port %s/%s is defined"
msgstr "無法檢查連接埠 %s/%s 是否已定義"

#: ../semanage/seobject.py:1115
#, python-format
msgid "Port %s/%s already defined"
msgstr "連接埠 %s/%s 已定義"

#: ../semanage/seobject.py:1119
#, python-format
msgid "Could not create port for %s/%s"
msgstr "無法為 %s/%s 建立連接埠"

#: ../semanage/seobject.py:1125 ../semanage/seobject.py:1399
#: ../semanage/seobject.py:1653
#, python-format
msgid "Could not create context for %s/%s"
msgstr "無法為 %s/%s 建立 context"

#: ../semanage/seobject.py:1129
#, python-format
msgid "Could not set user in port context for %s/%s"
msgstr "無法為 %s/%s 在連接埠 context 中設置使用者"

#: ../semanage/seobject.py:1133
#, python-format
msgid "Could not set role in port context for %s/%s"
msgstr "無法為 %s/%s 在連接埠 context 中設置角色"

#: ../semanage/seobject.py:1137
#, python-format
msgid "Could not set type in port context for %s/%s"
msgstr "無法為 %s/%s 在連接埠 context 中設置類型"

#: ../semanage/seobject.py:1142
#, python-format
msgid "Could not set mls fields in port context for %s/%s"
msgstr "無法為 %s/%s 在連接埠 context 中設置 mls 欄位"

#: ../semanage/seobject.py:1146
#, python-format
msgid "Could not set port context for %s/%s"
msgstr "無法為 %s/%s 設定 addr context"

#: ../semanage/seobject.py:1150
#, python-format
msgid "Could not add port %s/%s"
msgstr "無法新增連接埠 %s/%s"

#: ../semanage/seobject.py:1166 ../semanage/seobject.py:1438
#: ../semanage/seobject.py:1692 ../semanage/seobject.py:1970
#: ../semanage/seobject.py:2176
msgid "Requires setype or serange"
msgstr "需要 setype 或 serange"

#: ../semanage/seobject.py:1168 ../semanage/seobject.py:1440
#: ../semanage/seobject.py:1694
msgid "Requires setype"
msgstr "需要 setype"

#: ../semanage/seobject.py:1180 ../semanage/seobject.py:1246
#, python-format
msgid "Port %s/%s is not defined"
msgstr "連接埠 %s/%s 未定義"

#: ../semanage/seobject.py:1184
#, python-format
msgid "Could not query port %s/%s"
msgstr "無法查詢連接埠 %s/%s"

#: ../semanage/seobject.py:1198
#, python-format
msgid "Could not modify port %s/%s"
msgstr "無法修改連接埠 %s/%s"

#: ../semanage/seobject.py:1213
msgid "Could not list the ports"
msgstr "無法列出連接埠"

#: ../semanage/seobject.py:1230
#, python-format
msgid "Could not delete the port %s"
msgstr "無法刪除連接埠 %s"

#: ../semanage/seobject.py:1252
#, python-format
msgid "Port %s/%s is defined in policy, cannot be deleted"
msgstr "連接埠 %s/%s 已經在政策中定義，無法刪除"

#: ../semanage/seobject.py:1256
#, python-format
msgid "Could not delete port %s/%s"
msgstr "無法刪除連接埠 %s/%s"

#: ../semanage/seobject.py:1274 ../semanage/seobject.py:1294
msgid "Could not list ports"
msgstr "無法列出連接埠"

#: ../semanage/seobject.py:1329 ../sepolicy/sepolicy/sepolicy.glade:2676
#: ../sepolicy/sepolicy/sepolicy.glade:2774
#: ../sepolicy/sepolicy/sepolicy.glade:4638
msgid "SELinux Port Type"
msgstr "SELinux 連接埠類型"

#: ../semanage/seobject.py:1329
msgid "Proto"
msgstr "Proto"

#: ../semanage/seobject.py:1329 ../semanage/seobject.py:1835
#: ../sepolicy/sepolicy/sepolicy.glade:1413
msgid "Port Number"
msgstr "埠號"

#: ../semanage/seobject.py:1351
msgid "Subnet Prefix is required"
msgstr "子網前綴是必需的"

#: ../semanage/seobject.py:1361
msgid "Invalid Pkey"
msgstr "無效的Pkey"

#: ../semanage/seobject.py:1381 ../semanage/seobject.py:1445
#, python-format
msgid "Type %s is invalid, must be a ibpkey type"
msgstr "類型 %s 無效，必須是ibpkey類型"

#: ../semanage/seobject.py:1387 ../semanage/seobject.py:1451
#: ../semanage/seobject.py:1505 ../semanage/seobject.py:1511
#, python-format
msgid "Could not check if ibpkey %s/%s is defined"
msgstr "無法檢查ibpkey %s/%s 被定義為"

#: ../semanage/seobject.py:1389
#, python-format
msgid "ibpkey %s/%s already defined"
msgstr "ibpkey %s/%s 已定義"

#: ../semanage/seobject.py:1393
#, python-format
msgid "Could not create ibpkey for %s/%s"
msgstr "無法創建ibpkey %s/%s"

#: ../semanage/seobject.py:1403
#, python-format
msgid "Could not set user in ibpkey context for %s/%s"
msgstr "無法在ibpkey上下文中設置用戶 %s/%s"

#: ../semanage/seobject.py:1407
#, python-format
msgid "Could not set role in ibpkey context for %s/%s"
msgstr "無法在ibpkey上下文中設置角色 %s/%s"

#: ../semanage/seobject.py:1411
#, python-format
msgid "Could not set type in ibpkey context for %s/%s"
msgstr "無法在ibpkey上下文中設置類型 %s/%s"

#: ../semanage/seobject.py:1416
#, python-format
msgid "Could not set mls fields in ibpkey context for %s/%s"
msgstr "無法在ibpkey上下文中設置mls字段 %s/%s"

#: ../semanage/seobject.py:1420
#, python-format
msgid "Could not set ibpkey context for %s/%s"
msgstr "無法設置ibpkey上下文 %s/%s"

#: ../semanage/seobject.py:1424
#, python-format
msgid "Could not add ibpkey %s/%s"
msgstr "無法添加ibpkey %s/%s"

#: ../semanage/seobject.py:1453 ../semanage/seobject.py:1507
#, python-format
msgid "ibpkey %s/%s is not defined"
msgstr "ibpkey %s/%s 沒有定義"

#: ../semanage/seobject.py:1457
#, python-format
msgid "Could not query ibpkey %s/%s"
msgstr "無法查詢ibpkey %s/%s"

#: ../semanage/seobject.py:1468
#, python-format
msgid "Could not modify ibpkey %s/%s"
msgstr "無法修改ibpkey %s/%s"

#: ../semanage/seobject.py:1481
msgid "Could not list the ibpkeys"
msgstr "無法列出ibpkeys"

#: ../semanage/seobject.py:1496
#, python-format
msgid "Could not delete the ibpkey %s"
msgstr "無法刪除ibpkey %s"

#: ../semanage/seobject.py:1513
#, python-format
msgid "ibpkey %s/%s is defined in policy, cannot be deleted"
msgstr "ibpkey %s/%s 在策略中定義，不能刪除"

#: ../semanage/seobject.py:1517
#, python-format
msgid "Could not delete ibpkey %s/%s"
msgstr "無法刪除ibpkey %s/%s"

#: ../semanage/seobject.py:1533 ../semanage/seobject.py:1554
msgid "Could not list ibpkeys"
msgstr "無法列出ibpkeys"

#: ../semanage/seobject.py:1589
msgid "SELinux IB Pkey Type"
msgstr "SELinux IB Pkey型"

#: ../semanage/seobject.py:1589
msgid "Subnet_Prefix"
msgstr "Subnet_Prefix"

#: ../semanage/seobject.py:1589
msgid "Pkey Number"
msgstr "Pkey號碼"

#: ../semanage/seobject.py:1611
msgid "IB device name is required"
msgstr "IB設備名稱是必需的"

#: ../semanage/seobject.py:1616
msgid "Invalid Port Number"
msgstr "無效的端口號"

#: ../semanage/seobject.py:1620
#, python-format
msgid "Could not create a key for ibendport %s/%s"
msgstr "無法為ibendport創建密鑰 %s/%s"

#: ../semanage/seobject.py:1636 ../semanage/seobject.py:1699
#, python-format
msgid "Type %s is invalid, must be an ibendport type"
msgstr "類型 %s 無效，必須是ibendport類型"

#: ../semanage/seobject.py:1641 ../semanage/seobject.py:1705
#: ../semanage/seobject.py:1757 ../semanage/seobject.py:1763
#, python-format
msgid "Could not check if ibendport %s/%s is defined"
msgstr "無法檢查ibendport %s/%s 被定義為"

#: ../semanage/seobject.py:1643
#, python-format
msgid "ibendport %s/%s already defined"
msgstr "ibendport %s/%s 已定義"

#: ../semanage/seobject.py:1647
#, python-format
msgid "Could not create ibendport for %s/%s"
msgstr "無法創建ibendport %s/%s"

#: ../semanage/seobject.py:1657
#, python-format
msgid "Could not set user in ibendport context for %s/%s"
msgstr "無法在ibendport上下文中設置用戶 %s/%s"

#: ../semanage/seobject.py:1661
#, python-format
msgid "Could not set role in ibendport context for %s/%s"
msgstr "無法在ibendport上下文中設置角色 %s/%s"

#: ../semanage/seobject.py:1665
#, python-format
msgid "Could not set type in ibendport context for %s/%s"
msgstr "無法在ibendport上下文中設置類型 %s/%s"

#: ../semanage/seobject.py:1670
#, python-format
msgid "Could not set mls fields in ibendport context for %s/%s"
msgstr "無法在ibendport上下文中設置mls字段 %s/%s"

#: ../semanage/seobject.py:1674
#, python-format
msgid "Could not set ibendport context for %s/%s"
msgstr "無法設置ibendport上下文 %s/%s"

#: ../semanage/seobject.py:1678
#, python-format
msgid "Could not add ibendport %s/%s"
msgstr "無法添加ibendport %s/%s"

#: ../semanage/seobject.py:1707 ../semanage/seobject.py:1759
#, python-format
msgid "ibendport %s/%s is not defined"
msgstr "ibendport %s/%s 沒有定義"

#: ../semanage/seobject.py:1711
#, python-format
msgid "Could not query ibendport %s/%s"
msgstr "無法查詢ibendport %s/%s"

#: ../semanage/seobject.py:1722
#, python-format
msgid "Could not modify ibendport %s/%s"
msgstr "無法修改ibendport %s/%s"

#: ../semanage/seobject.py:1735
msgid "Could not list the ibendports"
msgstr "無法列出ibendports"

#: ../semanage/seobject.py:1744
#, python-format
msgid "Could not create a key for %s/%d"
msgstr "無法創建密鑰 %s/%d"

#: ../semanage/seobject.py:1748
#, python-format
msgid "Could not delete the ibendport %s/%d"
msgstr "無法刪除ibendport %s/%d"

#: ../semanage/seobject.py:1765
#, python-format
msgid "ibendport %s/%s is defined in policy, cannot be deleted"
msgstr "ibendport %s/%s 在策略中定義，不能刪除"

#: ../semanage/seobject.py:1769
#, python-format
msgid "Could not delete ibendport %s/%s"
msgstr "無法刪除ibendport %s/%s"

#: ../semanage/seobject.py:1785 ../semanage/seobject.py:1805
msgid "Could not list ibendports"
msgstr "無法列出ibendports"

#: ../semanage/seobject.py:1835
msgid "SELinux IB End Port Type"
msgstr "SELinux IB端口類型"

#: ../semanage/seobject.py:1835
msgid "IB Device Name"
msgstr "IB設備名稱"

#: ../semanage/seobject.py:1861
msgid "Node Address is required"
msgstr "需要節點位址"

#: ../semanage/seobject.py:1873 ../semanage/seobject.py:1885
msgid "Unknown or missing protocol"
msgstr "通訊協定不明或遺失"

#: ../semanage/seobject.py:1899
msgid "SELinux node type is required"
msgstr "需要 SELinux 的節點類型"

#: ../semanage/seobject.py:1904 ../semanage/seobject.py:1975
#, python-format
msgid "Type %s is invalid, must be a node type"
msgstr "類型 %s 無效，類型必須是個節點"

#: ../semanage/seobject.py:1908 ../semanage/seobject.py:1979
#: ../semanage/seobject.py:2016 ../semanage/seobject.py:2117
#: ../semanage/seobject.py:2180 ../semanage/seobject.py:2216
#: ../semanage/seobject.py:2435
#, python-format
msgid "Could not create key for %s"
msgstr "無法為 %s 建立金鑰"

#: ../semanage/seobject.py:1912 ../semanage/seobject.py:1983
#: ../semanage/seobject.py:2020 ../semanage/seobject.py:2026
#, python-format
msgid "Could not check if addr %s is defined"
msgstr "無法檢查 addr %s 是否已定義"

#: ../semanage/seobject.py:1914
#, python-format
msgid "Addr %s already defined"
msgstr "地址 %s 已定義"

#: ../semanage/seobject.py:1918
#, python-format
msgid "Could not create addr for %s"
msgstr "無法為 %s 建立 addr"

#: ../semanage/seobject.py:1924 ../semanage/seobject.py:2132
#: ../semanage/seobject.py:2389
#, python-format
msgid "Could not create context for %s"
msgstr "無法為 %s 建立情境"

#: ../semanage/seobject.py:1928
#, python-format
msgid "Could not set mask for %s"
msgstr "無法為 %s 設定遮罩"

#: ../semanage/seobject.py:1932
#, python-format
msgid "Could not set user in addr context for %s"
msgstr "無法為 %s 的 addr 情境設定使用者"

#: ../semanage/seobject.py:1936
#, python-format
msgid "Could not set role in addr context for %s"
msgstr "無法為 %s 的 addr 情境設定角色"

#: ../semanage/seobject.py:1940
#, python-format
msgid "Could not set type in addr context for %s"
msgstr "無法為 %s 的 addr 情境設定類型"

#: ../semanage/seobject.py:1945
#, python-format
msgid "Could not set mls fields in addr context for %s"
msgstr "無法為 %s 的 addr 情境設定 mls 欄位"

#: ../semanage/seobject.py:1949
#, python-format
msgid "Could not set addr context for %s"
msgstr "無法為 %s 設定 addr 情境"

#: ../semanage/seobject.py:1953
#, python-format
msgid "Could not add addr %s"
msgstr "無法新增 addr %s"

#: ../semanage/seobject.py:1985 ../semanage/seobject.py:2022
#, python-format
msgid "Addr %s is not defined"
msgstr "Addr %s 未定義"

#: ../semanage/seobject.py:1989
#, python-format
msgid "Could not query addr %s"
msgstr "無法查詢 addr %s"

#: ../semanage/seobject.py:1999
#, python-format
msgid "Could not modify addr %s"
msgstr "無法修改 addr %s"

#: ../semanage/seobject.py:2028
#, python-format
msgid "Addr %s is defined in policy, cannot be deleted"
msgstr "Addr %s 已經在方針中定義，無法刪除"

#: ../semanage/seobject.py:2032
#, python-format
msgid "Could not delete addr %s"
msgstr "無法刪除 addr %s"

#: ../semanage/seobject.py:2046
msgid "Could not deleteall node mappings"
msgstr "無法刪除所有節點對映"

#: ../semanage/seobject.py:2060
msgid "Could not list addrs"
msgstr "無法列出 addr"

#: ../semanage/seobject.py:2113 ../semanage/seobject.py:2426
msgid "SELinux Type is required"
msgstr "需要 SELinux 類型"

#: ../semanage/seobject.py:2121 ../semanage/seobject.py:2184
#: ../semanage/seobject.py:2220 ../semanage/seobject.py:2226
#, python-format
msgid "Could not check if interface %s is defined"
msgstr "無法檢查介面 %s 是否已經定義"

#: ../semanage/seobject.py:2123
#, python-format
msgid "Interface %s already defined"
msgstr "接口 %s 已定義"

#: ../semanage/seobject.py:2127
#, python-format
msgid "Could not create interface for %s"
msgstr "無法為 %s 建立介面"

#: ../semanage/seobject.py:2136
#, python-format
msgid "Could not set user in interface context for %s"
msgstr "無法為 %s 設定介面情境中的使用者"

#: ../semanage/seobject.py:2140
#, python-format
msgid "Could not set role in interface context for %s"
msgstr "無法為 %s 設定介面情境中的角色"

#: ../semanage/seobject.py:2144
#, python-format
msgid "Could not set type in interface context for %s"
msgstr "無法為 %s 設定介面情境中的類型"

#: ../semanage/seobject.py:2149
#, python-format
msgid "Could not set mls fields in interface context for %s"
msgstr "無法為 %s 設定介面情境中的 mls 欄位"

#: ../semanage/seobject.py:2153
#, python-format
msgid "Could not set interface context for %s"
msgstr "無法為 %s 設定介面情境"

#: ../semanage/seobject.py:2157
#, python-format
msgid "Could not set message context for %s"
msgstr "無法為 %s 設定訊息情境"

#: ../semanage/seobject.py:2161
#, python-format
msgid "Could not add interface %s"
msgstr "無法新增介面 %s"

#: ../semanage/seobject.py:2186 ../semanage/seobject.py:2222
#, python-format
msgid "Interface %s is not defined"
msgstr "介面 %s 未定義"

#: ../semanage/seobject.py:2190
#, python-format
msgid "Could not query interface %s"
msgstr "無法查詢介面 %s"

#: ../semanage/seobject.py:2201
#, python-format
msgid "Could not modify interface %s"
msgstr "無法修改介面 %s"

#: ../semanage/seobject.py:2228
#, python-format
msgid "Interface %s is defined in policy, cannot be deleted"
msgstr "介面 %s 定義在方針中，無法刪除"

#: ../semanage/seobject.py:2232
#, python-format
msgid "Could not delete interface %s"
msgstr "無法刪除介面 %s"

#: ../semanage/seobject.py:2246
msgid "Could not delete all interface  mappings"
msgstr "無法刪除所有介面  對映"

#: ../semanage/seobject.py:2260
msgid "Could not list interfaces"
msgstr "無法列出介面"

#: ../semanage/seobject.py:2285
msgid "SELinux Interface"
msgstr "SELinux 介面"

#: ../semanage/seobject.py:2285 ../semanage/seobject.py:2674
msgid "Context"
msgstr "情境"

#: ../semanage/seobject.py:2355
#, python-format
msgid "Target %s is not valid. Target is not allowed to end with '/'"
msgstr "目標 %s 無效。目標不可以「/」作為結尾"

#: ../semanage/seobject.py:2358
#, python-format
msgid "Substitute %s is not valid. Substitute is not allowed to end with '/'"
msgstr ""

#: ../semanage/seobject.py:2361
#, python-format
msgid "Equivalence class for %s already exists"
msgstr "%s 的相等類別已存在"

#: ../semanage/seobject.py:2367
#, python-format
msgid "File spec %s conflicts with equivalency rule '%s %s'"
msgstr "檔案規格 %s 與相等對應規則 '%s %s' 發生衝突"

#: ../semanage/seobject.py:2378
#, python-format
msgid "Equivalence class for %s does not exist"
msgstr "等價類 %s 不存在"

#: ../semanage/seobject.py:2395
#, python-format
msgid "Could not set user in file context for %s"
msgstr "無法為 %s 的檔案情境設定使用者"

#: ../semanage/seobject.py:2399
#, python-format
msgid "Could not set role in file context for %s"
msgstr "無法為 %s 的檔案情境設定角色"

#: ../semanage/seobject.py:2404 ../semanage/seobject.py:2464
#, python-format
msgid "Could not set mls fields in file context for %s"
msgstr "無法為 %s 的檔案情境設定 mls 欄位"

#: ../semanage/seobject.py:2410
msgid "Invalid file specification"
msgstr "無效的檔案規格"

#: ../semanage/seobject.py:2412
msgid "File specification can not include spaces"
msgstr "檔案規格不可包含空格"

#: ../semanage/seobject.py:2417
#, python-format
msgid ""
"File spec %s conflicts with equivalency rule '%s %s'; Try adding '%s' instead"
msgstr "檔案規格 %s 與相等對應規則 '%s %s' 發生衝突；請嘗試加入 '%s' 來代替"

#: ../semanage/seobject.py:2431 ../semanage/seobject.py:2496
#, python-format
msgid "Type %s is invalid, must be a file or device type"
msgstr "類型 %s 無效，類型必須是個檔案或是裝置"

#: ../semanage/seobject.py:2439 ../semanage/seobject.py:2444
#: ../semanage/seobject.py:2506 ../semanage/seobject.py:2600
#: ../semanage/seobject.py:2604
#, python-format
msgid "Could not check if file context for %s is defined"
msgstr "無法檢查 %s 的檔案情境是否已經定義"

#: ../semanage/seobject.py:2447
#, python-format
msgid "File context for %s already defined"
msgstr "文件上下文 %s 已定義"

#: ../semanage/seobject.py:2451
#, python-format
msgid "Could not create file context for %s"
msgstr "無法為 %s 建立檔案情境"

#: ../semanage/seobject.py:2459
#, python-format
msgid "Could not set type in file context for %s"
msgstr "無法為 %s 的檔案情境設定類型"

#: ../semanage/seobject.py:2467 ../semanage/seobject.py:2536
#: ../semanage/seobject.py:2540
#, python-format
msgid "Could not set file context for %s"
msgstr "無法為 %s 設定檔案情境"

#: ../semanage/seobject.py:2473
#, python-format
msgid "Could not add file context for %s"
msgstr "無法為 %s 新增檔案情境"

#: ../semanage/seobject.py:2492
msgid "Requires setype, serange or seuser"
msgstr "需要 setype、serange 或 seuser"

#: ../semanage/seobject.py:2510 ../semanage/seobject.py:2608
#, python-format
msgid "File context for %s is not defined"
msgstr "%s 的檔案情境未定義"

#: ../semanage/seobject.py:2518
#, python-format
msgid "Could not query file context for %s"
msgstr "無法為 %s 查詢檔案情境"

#: ../semanage/seobject.py:2544
#, python-format
msgid "Could not modify file context for %s"
msgstr "無法為 %s 修改檔案情境"

#: ../semanage/seobject.py:2562
msgid "Could not list the file contexts"
msgstr "無法列出檔案情境"

#: ../semanage/seobject.py:2576
#, python-format
msgid "Could not delete the file context %s"
msgstr "無法刪除檔案情境 %s"

#: ../semanage/seobject.py:2606
#, python-format
msgid "File context for %s is defined in policy, cannot be deleted"
msgstr "%s 的檔案情境已經定義在方針中，無法刪除"

#: ../semanage/seobject.py:2612
#, python-format
msgid "Could not delete file context for %s"
msgstr "無法為 %s 刪除檔案情境"

#: ../semanage/seobject.py:2629
msgid "Could not list file contexts"
msgstr "無法列出檔案情境"

#: ../semanage/seobject.py:2633
msgid "Could not list file contexts for home directories"
msgstr "無法列出主目錄的文件上下文"

#: ../semanage/seobject.py:2637
msgid "Could not list local file contexts"
msgstr "無法列出本地的檔案情境"

#: ../semanage/seobject.py:2674
msgid "SELinux fcontext"
msgstr "SELinux fcontext"

#: ../semanage/seobject.py:2687
msgid ""
"\n"
"SELinux Distribution fcontext Equivalence \n"
msgstr ""
"\n"
"SELinux 散布版 fcontext 相等 \n"

#: ../semanage/seobject.py:2692
msgid ""
"\n"
"SELinux Local fcontext Equivalence \n"
msgstr ""
"\n"
"SELinux 本地端 fcontext 相等 \n"

#: ../semanage/seobject.py:2730 ../semanage/seobject.py:2781
#: ../semanage/seobject.py:2787
#, python-format
msgid "Could not check if boolean %s is defined"
msgstr "無法檢查布林值 %s 是否已經定義"

#: ../semanage/seobject.py:2732 ../semanage/seobject.py:2783
#, python-format
msgid "Boolean %s is not defined"
msgstr "布林值 %s 未定義"

#: ../semanage/seobject.py:2736
#, python-format
msgid "Could not query file context %s"
msgstr "無法查詢檔案情境%s"

#: ../semanage/seobject.py:2741
#, python-format
msgid "You must specify one of the following values: %s"
msgstr "您必須指定下列其中一個值：%s"

#: ../semanage/seobject.py:2746
#, python-format
msgid "Could not set active value of boolean %s"
msgstr "無法設置布林值 %s"

#: ../semanage/seobject.py:2749
#, python-format
msgid "Could not modify boolean %s"
msgstr "無法修改布林值 %s"

#: ../semanage/seobject.py:2765
#, python-format
msgid "Bad format %s: Record %s"
msgstr "格式錯誤 %s：紀錄 %s"

#: ../semanage/seobject.py:2789
#, python-format
msgid "Boolean %s is defined in policy, cannot be deleted"
msgstr "布林值 %s 已經定義在方針中，無法刪除"

#: ../semanage/seobject.py:2793
#, python-format
msgid "Could not delete boolean %s"
msgstr "無法刪除布林值 %s"

#: ../semanage/seobject.py:2805 ../semanage/seobject.py:2822
msgid "Could not list booleans"
msgstr "無法列出布林值"

#: ../semanage/seobject.py:2855
msgid "off"
msgstr "關閉"

#: ../semanage/seobject.py:2855
msgid "on"
msgstr "開啟"

#: ../semanage/seobject.py:2867
msgid "SELinux boolean"
msgstr "SELinux 布林值"

#: ../semanage/seobject.py:2867
msgid "State"
msgstr "狀態"

#: ../semanage/seobject.py:2867
msgid "Default"
msgstr "預設值"

#: ../semanage/seobject.py:2867 ../sepolicy/sepolicy/sepolicy.glade:2148
#: ../sepolicy/sepolicy/sepolicy.glade:2518
#: ../sepolicy/sepolicy/sepolicy.glade:5107
msgid "Description"
msgstr "描述"

#: ../sepolgen/src/sepolgen/interfaces.py:481
msgid "Found circular interface class"
msgstr "找到循環接口類"

#: ../sepolgen/src/sepolgen/interfaces.py:486
#, python-format
msgid "Missing interface definition for %s"
msgstr "缺少接口定義 %s"

#: ../sepolicy/sepolicy/generate.py:140
msgid "Standard Init Daemon"
msgstr "標準的 Init 幕後程式"

#: ../sepolicy/sepolicy/generate.py:141
msgid "DBUS System Daemon"
msgstr "DBUS 系統幕後程式"

#: ../sepolicy/sepolicy/generate.py:142
msgid "Internet Services Daemon"
msgstr "網際網路服務幕後程式"

#: ../sepolicy/sepolicy/generate.py:143
msgid "Web Application/Script (CGI)"
msgstr "網站應用程式/指令稿 (CGI)"

#: ../sepolicy/sepolicy/generate.py:144
msgid "Sandbox"
msgstr "沙盒"

#: ../sepolicy/sepolicy/generate.py:145
msgid "User Application"
msgstr "使用者應用程式"

#: ../sepolicy/sepolicy/generate.py:146
msgid "Existing Domain Type"
msgstr "既有的區域類型"

#: ../sepolicy/sepolicy/generate.py:147
msgid "Minimal Terminal Login User Role"
msgstr "最低階的終端機登入使用者角色"

#: ../sepolicy/sepolicy/generate.py:148
msgid "Minimal X Windows Login User Role"
msgstr "最低階的 X Windows 登入使用者角色"

#: ../sepolicy/sepolicy/generate.py:149
msgid "Desktop Login User Role"
msgstr "桌面登入使用者角色"

#: ../sepolicy/sepolicy/generate.py:150
msgid "Administrator Login User Role"
msgstr "管理員登入使用者角色"

#: ../sepolicy/sepolicy/generate.py:151
msgid "Confined Root Administrator Role"
msgstr "受限的 Root 管理員角色"

#: ../sepolicy/sepolicy/generate.py:152
msgid "Module information for a new type"
msgstr "新類型的模組資訊"

#: ../sepolicy/sepolicy/generate.py:158
msgid "Valid Types:\n"
msgstr "合於規定的類型：\n"

#: ../sepolicy/sepolicy/generate.py:193
#, python-format
msgid "Ports must be numbers or ranges of numbers from 1 to %d "
msgstr "連接埠必須是數字或是由 1 至 %d 這個範圍內的數字"

#: ../sepolicy/sepolicy/generate.py:205
msgid "You must enter a valid policy type"
msgstr "您必須輸入有效的方針類型"

#: ../sepolicy/sepolicy/generate.py:208
#, python-format
msgid "You must enter a name for your policy module for your '%s'."
msgstr "您必須為您「%s」的方針模組輸入一組名稱。"

#: ../sepolicy/sepolicy/generate.py:346
#, fuzzy
#| msgid ""
#| "Name must be alpha numberic with no spaces. Consider using option \"-n "
#| "MODULENAME\""
msgid ""
"Name must be alphanumeric with no spaces. Consider using option \"-n "
"MODULENAME\""
msgstr "名稱必須是字母數字，並且不包含空格。請考慮使用「-n MODULENAME」選項"

#: ../sepolicy/sepolicy/generate.py:438
msgid "User Role types can not be assigned executables."
msgstr "使用者角色類型不可指定可執行檔。"

#: ../sepolicy/sepolicy/generate.py:444
#, fuzzy
#| msgid "Only Daemon apps can use an init script.."
msgid "Only Daemon apps can use an init script."
msgstr "只有幕後程式可使用 init 指令稿..."

#: ../sepolicy/sepolicy/generate.py:462
msgid "use_resolve must be a boolean value "
msgstr "use_resolve 必須是個布林值"

#: ../sepolicy/sepolicy/generate.py:468
msgid "use_syslog must be a boolean value "
msgstr "use_syslog 必須是個布林值"

#: ../sepolicy/sepolicy/generate.py:474
msgid "use_kerberos must be a boolean value "
msgstr "use_kerberos 必須是個布林值"

#: ../sepolicy/sepolicy/generate.py:480
msgid "manage_krb5_rcache must be a boolean value "
msgstr "manage_krb5_rcache 必須是個布林值"

#: ../sepolicy/sepolicy/generate.py:510
msgid "USER Types automatically get a tmp type"
msgstr "USER 類型會自動地取得一項 tmp 類型"

#: ../sepolicy/sepolicy/generate.py:847
#, python-format
msgid "'%s' policy modules require existing domains"
msgstr "「%s」方針模組需要既有的區域"

#: ../sepolicy/sepolicy/generate.py:872
msgid "Type field required"
msgstr "需填入類型欄位"

#: ../sepolicy/sepolicy/generate.py:885
#, python-format
msgid ""
"You need to define a new type which ends with: \n"
" %s"
msgstr ""
"您需要定義新的類型，並且該類型以此作為結尾：\n"
" %s"

#: ../sepolicy/sepolicy/generate.py:1113
msgid "You must enter the executable path for your confined process"
msgstr "您必須為您受限的程序輸入可執行檔的路徑"

#: ../sepolicy/sepolicy/generate.py:1378
msgid "Created the following files:\n"
msgstr ""

#: ../sepolicy/sepolicy/generate.py:1379
msgid "Type Enforcement file"
msgstr "Type Enforcement 檔案"

#: ../sepolicy/sepolicy/generate.py:1380
msgid "Interface file"
msgstr "介面檔"

#: ../sepolicy/sepolicy/generate.py:1381
msgid "File Contexts file"
msgstr "檔案情境檔"

#: ../sepolicy/sepolicy/generate.py:1383
msgid "Spec file"
msgstr "規格檔案"

#: ../sepolicy/sepolicy/generate.py:1384
msgid "Setup Script"
msgstr "設置指令稿"

#: ../sepolicy/sepolicy/gui.py:67 ../sepolicy/sepolicy/sepolicy.glade:3732
#: ../sepolicy/sepolicy/sepolicy.glade:3834
#: ../sepolicy/sepolicy/sepolicy.glade:3897
#: ../sepolicy/sepolicy/sepolicy.glade:3960
msgid "No"
msgstr "否"

#: ../sepolicy/sepolicy/gui.py:67 ../sepolicy/sepolicy/sepolicy.glade:3715
#: ../sepolicy/sepolicy/sepolicy.glade:3816
#: ../sepolicy/sepolicy/sepolicy.glade:3880
#: ../sepolicy/sepolicy/sepolicy.glade:3943
msgid "Yes"
msgstr "是"

#: ../sepolicy/sepolicy/gui.py:68
msgid "Disable"
msgstr "停用"

#: ../sepolicy/sepolicy/gui.py:68
msgid "Enable"
msgstr "啟用"

#: ../sepolicy/sepolicy/gui.py:81 ../sepolicy/sepolicy/sepolicy.glade:726
#: ../sepolicy/sepolicy/sepolicy.glade:1467
#: ../sepolicy/sepolicy/sepolicy.glade:3501
msgid "Advanced >>"
msgstr "進階 >>"

#: ../sepolicy/sepolicy/gui.py:81
msgid "Advanced <<"
msgstr "進階 <<"

#: ../sepolicy/sepolicy/gui.py:82 ../sepolicy/sepolicy/sepolicy.glade:80
msgid "Advanced Search >>"
msgstr "進階搜尋 >>"

#: ../sepolicy/sepolicy/gui.py:82
msgid "Advanced Search <<"
msgstr "進階搜尋 <<"

#: ../sepolicy/sepolicy/gui.py:107
msgid ""
"<small>\n"
"To change from Disabled to Enforcing mode\n"
"- Change the system mode from Disabled to Permissive\n"
"- Reboot, so that the system can relabel\n"
"- Once the system is working as planned\n"
"  * Change the system mode to Enforcing</small>\n"
msgstr ""
"<small>\n"
"要從停用狀態改變到強制狀態\n"
"- 把系統模式從停用變為寬容\n"
"- 重新開機，系統可以重新標記\n"
"- 一旦系統如預期運作\n"
"  * 將系統模式改為強制</small>\n"

#: ../sepolicy/sepolicy/gui.py:503
#, python-format
msgid "%s is not a valid domain"
msgstr "%s 不是合於規定的區域"

#: ../sepolicy/sepolicy/gui.py:652
msgid "System Status: Disabled"
msgstr "系統狀態：已停用"

#: ../sepolicy/sepolicy/gui.py:750
msgid "Help: Start Page"
msgstr "求助：起始頁"

#: ../sepolicy/sepolicy/gui.py:754
msgid "Help: Booleans Page"
msgstr "求助：布林值頁"

#: ../sepolicy/sepolicy/gui.py:760
msgid "Help: Executable Files Page"
msgstr "求助：可執行檔頁"

#: ../sepolicy/sepolicy/gui.py:763
msgid "Help: Writable Files Page"
msgstr "求助：可寫入檔案頁"

#: ../sepolicy/sepolicy/gui.py:766
msgid "Help: Application Types Page"
msgstr "求助：應用程式類型頁"

#: ../sepolicy/sepolicy/gui.py:771
msgid "Help: Outbound Network Connections Page"
msgstr "求助：傳出網路連線頁"

#: ../sepolicy/sepolicy/gui.py:774
msgid "Help: Inbound Network Connections Page"
msgstr "求助：傳入網路連線頁"

#: ../sepolicy/sepolicy/gui.py:780
msgid "Help: Transition from application Page"
msgstr "求助：從應用程式轉移頁"

#: ../sepolicy/sepolicy/gui.py:783
msgid "Help: Transition into application Page"
msgstr "求助：轉移至應用程式頁"

#: ../sepolicy/sepolicy/gui.py:786
msgid "Help: Transition application file Page"
msgstr "求助：轉移應用程式檔案頁"

#: ../sepolicy/sepolicy/gui.py:790
msgid "Help: Systems Page"
msgstr "求助：系統頁"

#: ../sepolicy/sepolicy/gui.py:794
msgid "Help: Lockdown Page"
msgstr "求助：封鎖頁"

#: ../sepolicy/sepolicy/gui.py:798
msgid "Help: Login Page"
msgstr "求助：登入頁"

#: ../sepolicy/sepolicy/gui.py:802
msgid "Help: SELinux User Page"
msgstr "求助：SELinux 使用者頁"

#: ../sepolicy/sepolicy/gui.py:806
msgid "Help: File Equivalence Page"
msgstr "求助：檔案相等頁"

#: ../sepolicy/sepolicy/gui.py:951 ../sepolicy/sepolicy/gui.py:1242
#: ../sepolicy/sepolicy/gui.py:1682 ../sepolicy/sepolicy/gui.py:1929
#: ../sepolicy/sepolicy/gui.py:2717
msgid "More..."
msgstr "更多..."

#: ../sepolicy/sepolicy/gui.py:1059
#, python-format
msgid "File path used to enter the '%s' domain."
msgstr "用來輸入「%s」區域的檔案路徑。"

#: ../sepolicy/sepolicy/gui.py:1060
#, python-format
msgid "Files to which the '%s' domain can write."
msgstr "「%s」區域可寫入的檔案。"

#: ../sepolicy/sepolicy/gui.py:1061
#, python-format
msgid "Network Ports to which the '%s' is allowed to connect."
msgstr "「%s」允許連上的網路連接埠。"

#: ../sepolicy/sepolicy/gui.py:1062
#, python-format
msgid "Network Ports to which the '%s' is allowed to listen."
msgstr "「%s」允許聆聽的網路連接埠。"

#: ../sepolicy/sepolicy/gui.py:1063
#, python-format
msgid "File Types defined for the '%s'."
msgstr "為「%s」定義的檔案類型。"

#: ../sepolicy/sepolicy/gui.py:1064
#, python-format
msgid ""
"Display boolean information that can be used to modify the policy for the "
"'%s'."
msgstr "顯示可以用來為「%s」修改方針的布林值資訊。"

#: ../sepolicy/sepolicy/gui.py:1065
#, python-format
msgid "Display file type information that can be used by the '%s'."
msgstr "顯示可以給「%s」所用的檔案類型資訊。"

#: ../sepolicy/sepolicy/gui.py:1066
#, python-format
msgid "Display network ports to which the '%s' can connect or listen to."
msgstr "顯示「%s」可以連接或聆聽的網路連接埠。"

#: ../sepolicy/sepolicy/gui.py:1067
#, python-format
msgid "Application Transitions Into '%s'"
msgstr "應用程式轉移至「%s」"

#: ../sepolicy/sepolicy/gui.py:1068
#, python-format
msgid "Application Transitions From '%s'"
msgstr "應用程式轉移自「%s」"

#: ../sepolicy/sepolicy/gui.py:1069
#, python-format
msgid "File Transitions From '%s'"
msgstr "檔案轉移自「%s」"

#: ../sepolicy/sepolicy/gui.py:1070
#, python-format
msgid ""
"Executables which will transition to '%s', when executing selected domains "
"entrypoint."
msgstr "可轉換為'的可執行文件%s'，執行選定的域入口點時。"

#: ../sepolicy/sepolicy/gui.py:1071
#, python-format
msgid ""
"Executables which will transition to a different domain, when '%s' executes "
"them."
msgstr "可執行文件將轉換到不同的域，當'%s'執行它們。"

#: ../sepolicy/sepolicy/gui.py:1072
#, python-format
msgid "Files by '%s' with transitions to a different label."
msgstr "文件'%s'轉換到不同的標籤。"

#: ../sepolicy/sepolicy/gui.py:1073
#, python-format
msgid "Display applications that can transition into or out of the '%s'."
msgstr "顯示可以轉移自或轉移至「%s」的應用程式。"

#: ../sepolicy/sepolicy/gui.py:1167 ../sepolicy/sepolicy/__init__.py:83
msgid "all files"
msgstr "所有檔案"

#: ../sepolicy/sepolicy/gui.py:1181
msgid "MISSING FILE PATH"
msgstr "缺少檔案路徑"

#: ../sepolicy/sepolicy/gui.py:1296
#, python-format
msgid "To disable this transition, go to the %sBoolean section%s."
msgstr "要禁用此轉換，請轉到 %sBoolean 部分%s。"

#: ../sepolicy/sepolicy/gui.py:1298
#, python-format
msgid "To enable this transition, go to the %sBoolean section%s."
msgstr "要啟用此轉換，請轉到 %sBoolean 部分%s。"

#: ../sepolicy/sepolicy/gui.py:1355
msgid "executable"
msgstr "可執行"

#: ../sepolicy/sepolicy/gui.py:1358
msgid "writable"
msgstr "可寫入"

#: ../sepolicy/sepolicy/gui.py:1361
msgid "application"
msgstr "應用程式"

#: ../sepolicy/sepolicy/gui.py:1362
#, python-format
msgid "Add new %(TYPE)s file path for '%(DOMAIN)s' domains."
msgstr "新增 %(TYPE)s 檔案路徑給「%(DOMAIN)s」區域。"

#: ../sepolicy/sepolicy/gui.py:1363
#, python-format
msgid "Delete %(TYPE)s file paths for '%(DOMAIN)s' domain."
msgstr "刪除 %(TYPE)s 檔案路徑給「%(DOMAIN)s」區域。"

#: ../sepolicy/sepolicy/gui.py:1364
#, python-format
msgid ""
"Modify %(TYPE)s file path for '%(DOMAIN)s' domain. Only bolded items in the "
"list can be selected, this indicates they were modified previously."
msgstr ""
"修改 %(TYPE)s 檔案路徑給「%(DOMAIN)s」區域使用。只有清單中加粗體的項目才可以"
"被選擇，這表示這些項目之前被修改過。"

#: ../sepolicy/sepolicy/gui.py:1376
msgid "connect"
msgstr "連接"

#: ../sepolicy/sepolicy/gui.py:1379
msgid "listen for inbound connections"
msgstr "聆聽傳入的連線"

#: ../sepolicy/sepolicy/gui.py:1381
#, python-format
msgid ""
"Add new port definition to which the '%(APP)s' domain is allowed to %(PERM)s."
msgstr "新增「%(APP)s」區域允許 %(PERM)s 的連接埠定義。"

#: ../sepolicy/sepolicy/gui.py:1382
#, python-format
msgid ""
"Delete modified port definitions to which the '%(APP)s' domain is allowed to "
"%(PERM)s."
msgstr "刪除 「%(APP)s」區域允許 %(PERM)s 的已修改連接埠定義。"

#: ../sepolicy/sepolicy/gui.py:1383
#, python-format
msgid ""
"Modify port definitions to which the '%(APP)s' domain is allowed to %(PERM)s."
msgstr "修改「%(APP)s」區域允許 %(PERM)s 的連接埠定義。"

#: ../sepolicy/sepolicy/gui.py:1412
msgid "Add new SELinux User/Role definition."
msgstr "新增 SELinux 使用者/角色定義。"

#: ../sepolicy/sepolicy/gui.py:1413
msgid "Delete modified SELinux User/Role definitions."
msgstr "刪除修改過的 SELinux 使用者/角色定義。"

#: ../sepolicy/sepolicy/gui.py:1414
msgid "Modify selected modified SELinux User/Role definitions."
msgstr "刪除所選擇修改過的 SELinux 使用者/角色定義。"

#: ../sepolicy/sepolicy/gui.py:1421
msgid "Add new Login Mapping definition."
msgstr "新增登入對映的定義。"

#: ../sepolicy/sepolicy/gui.py:1422
msgid "Delete modified Login Mapping definitions."
msgstr "刪除修改過的「登入對映」定義。"

#: ../sepolicy/sepolicy/gui.py:1423
msgid "Modify selected modified Login Mapping definitions."
msgstr "修改所選擇修改過的「登入對映」定義。"

#: ../sepolicy/sepolicy/gui.py:1430
msgid "Add new File Equivalence definition."
msgstr "新增「檔案相等」定義。"

#: ../sepolicy/sepolicy/gui.py:1431
msgid "Delete modified File Equivalence definitions."
msgstr "刪除修改過的「檔案相等」定義。"

#: ../sepolicy/sepolicy/gui.py:1432
msgid ""
"Modify selected modified File Equivalence definitions. Only bolded items in "
"the list can be selected, this indicates they were modified previously."
msgstr ""
"修改所選擇修改過的「檔案相等」定義。只有清單中的粗體字項目可以選擇，粗體字表"
"示這些項目之前被修改過。"

#: ../sepolicy/sepolicy/gui.py:1460
#, python-format
msgid "Boolean %s Allow Rules"
msgstr "布林值 %s 允許規則"

#: ../sepolicy/sepolicy/gui.py:1473
#, python-format
msgid "Add Network Port for %s.  Ports will be created when update is applied."
msgstr "新增 %s 的網路連接埠。當套用了更新之後，連接埠將會被建立。"

#: ../sepolicy/sepolicy/gui.py:1474
#, python-format
msgid "Add Network Port for %s"
msgstr "為 %s 新增網路連接埠"

#: ../sepolicy/sepolicy/gui.py:1479
#, python-format
msgid ""
"Add File Labeling for %s. File labels will be created when update is applied."
msgstr "為 %s 新增檔案標籤。套用更新後，會建立新的檔案標籤。"

#: ../sepolicy/sepolicy/gui.py:1480 ../sepolicy/sepolicy/gui.py:1533
#, python-format
msgid "Add File Labeling for %s"
msgstr "為 %s 新增檔案標籤"

#: ../sepolicy/sepolicy/gui.py:1490
msgid "Add Login Mapping. User Mapping will be created when Update is applied."
msgstr "新增登入對映。套用更新後會建立使用者對映。"

#: ../sepolicy/sepolicy/gui.py:1491
msgid "Add Login Mapping"
msgstr "新增登入對映"

#: ../sepolicy/sepolicy/gui.py:1496
msgid ""
"Add SELinux User Role. SELinux user roles will be created when update is "
"applied."
msgstr "新增 SELinux 使用者角色。套用更新後會建立 SELinux 使用者角色。"

#: ../sepolicy/sepolicy/gui.py:1497
msgid "Add SELinux Users"
msgstr "新增 SELinux 使用者"

#: ../sepolicy/sepolicy/gui.py:1504
msgid ""
"Add File Equivalency Mapping. Mapping will be created when update is applied."
msgstr "新增「檔案相等」對映。當更新套用後，對映便會被建立。"

#: ../sepolicy/sepolicy/gui.py:1505
msgid "Add SELinux File Equivalency"
msgstr "新增 SELinux 檔案相等"

#: ../sepolicy/sepolicy/gui.py:1532
#, python-format
msgid ""
"Modify File Labeling for %s. File labels will be created when update is "
"applied."
msgstr "為 %s 修改檔案標籤。套用更新後，會建立新的檔案標籤。"

#: ../sepolicy/sepolicy/gui.py:1588
msgid ""
"Modify SELinux User Role. SELinux user roles will be modified when update is "
"applied."
msgstr "修改 SELinux 使用者角色。套用更新後會修改 SELinux 使用者角色。"

#: ../sepolicy/sepolicy/gui.py:1589
msgid "Modify SELinux Users"
msgstr "修改 SELinux 使用者"

#: ../sepolicy/sepolicy/gui.py:1597
msgid ""
"Modify Login Mapping. Login Mapping will be modified when Update is applied."
msgstr "修改登入對映。套用更新後會修改登入對映。"

#: ../sepolicy/sepolicy/gui.py:1598
msgid "Modify Login Mapping"
msgstr "修改登入對映"

#: ../sepolicy/sepolicy/gui.py:1604
msgid ""
"Modify File Equivalency Mapping. Mapping will be created when update is "
"applied."
msgstr "修改「檔案相等對映」。當套用了更新之後，對映將會被建立。"

#: ../sepolicy/sepolicy/gui.py:1605
msgid "Modify SELinux File Equivalency"
msgstr "修改 SELinux 檔案相等"

#: ../sepolicy/sepolicy/gui.py:1690
#, python-format
msgid ""
"Modify Network Port for %s.  Ports will be created when update is applied."
msgstr "修改 %s 的網路連接埠。當套用了更新之後，連接埠將會被建立。"

#: ../sepolicy/sepolicy/gui.py:1691
#, python-format
msgid "Modify Network Port for %s"
msgstr "修改 %s 的網路連接埠"

#: ../sepolicy/sepolicy/gui.py:1910
#, python-format
msgid "The entry '%s' is not a valid path.  Paths must begin with a '/'."
msgstr "「%s」項目不是個有效的路徑。路徑必須以「/」作為起始。"

#: ../sepolicy/sepolicy/gui.py:1923
msgid "Port number must be between 1 and 65536"
msgstr "連接埠號必須介於 1 和 65536 之間"

#: ../sepolicy/sepolicy/gui.py:2203
#, python-format
msgid "SELinux name: %s"
msgstr "SELinux 名稱：%s"

#: ../sepolicy/sepolicy/gui.py:2214
#, python-format
msgid "Add file labeling for %s"
msgstr "爲 %s 新增檔案標籤"

#: ../sepolicy/sepolicy/gui.py:2216
#, python-format
msgid "Delete file labeling for %s"
msgstr "刪除 %s 的檔案標籤"

#: ../sepolicy/sepolicy/gui.py:2218
#, python-format
msgid "Modify file labeling for %s"
msgstr "修改 %s 的檔案標籤"

#: ../sepolicy/sepolicy/gui.py:2222
#, python-format
msgid "File path: %s"
msgstr "檔案路徑：%s"

#: ../sepolicy/sepolicy/gui.py:2225
#, python-format
msgid "File class: %s"
msgstr "檔案類別：%s"

#: ../sepolicy/sepolicy/gui.py:2228 ../sepolicy/sepolicy/gui.py:2252
#, python-format
msgid "SELinux file type: %s"
msgstr "SELinux 檔案類型：%s"

#: ../sepolicy/sepolicy/gui.py:2237
#, python-format
msgid "Add ports for %s"
msgstr "為 %s 新增連接埠"

#: ../sepolicy/sepolicy/gui.py:2239
#, python-format
msgid "Delete ports for %s"
msgstr "刪除 %s 的連接埠"

#: ../sepolicy/sepolicy/gui.py:2241
#, python-format
msgid "Modify ports for %s"
msgstr "修改 %s 的連接埠"

#: ../sepolicy/sepolicy/gui.py:2244
#, python-format
msgid "Network ports: %s"
msgstr "網路連接埠：%s"

#: ../sepolicy/sepolicy/gui.py:2247
#, python-format
msgid "Network protocol: %s"
msgstr "網路協定：%s"

#: ../sepolicy/sepolicy/gui.py:2261
msgid "Add user"
msgstr "新增使用者"

#: ../sepolicy/sepolicy/gui.py:2263
msgid "Delete user"
msgstr "刪除使用者"

#: ../sepolicy/sepolicy/gui.py:2265
msgid "Modify user"
msgstr "修改使用者"

#: ../sepolicy/sepolicy/gui.py:2268
#, python-format
msgid "SELinux User : %s"
msgstr "SELinux 使用者：%s"

#: ../sepolicy/sepolicy/gui.py:2273
#, python-format
msgid "Roles: %s"
msgstr "角色：%s"

#: ../sepolicy/sepolicy/gui.py:2277 ../sepolicy/sepolicy/gui.py:2302
#, python-format
msgid "MLS/MCS Range: %s"
msgstr "MLS/MCS 範圍：%s"

#: ../sepolicy/sepolicy/gui.py:2286
msgid "Add login mapping"
msgstr "新增登入對映"

#: ../sepolicy/sepolicy/gui.py:2288
msgid "Delete login mapping"
msgstr "刪除登入對映"

#: ../sepolicy/sepolicy/gui.py:2290
msgid "Modify login mapping"
msgstr "修改登入對映"

#: ../sepolicy/sepolicy/gui.py:2294
#, python-format
msgid "Login Name : %s"
msgstr "登入名稱：%s"

#: ../sepolicy/sepolicy/gui.py:2298
#, python-format
msgid "SELinux User: %s"
msgstr "SELinux 使用者：%s"

#: ../sepolicy/sepolicy/gui.py:2311
msgid "Add file equiv labeling."
msgstr "新增檔案 equiv 相等標籤。"

#: ../sepolicy/sepolicy/gui.py:2313
msgid "Delete file equiv labeling."
msgstr "刪除檔案 equiv 相等標籤。"

#: ../sepolicy/sepolicy/gui.py:2315
msgid "Modify file equiv labeling."
msgstr "修改檔案 equiv 相等標籤。"

#: ../sepolicy/sepolicy/gui.py:2319
#, python-format
msgid "File path : %s"
msgstr "檔案路徑：%s"

#: ../sepolicy/sepolicy/gui.py:2323
#, python-format
msgid "Equivalence: %s"
msgstr "相等：%s"

#: ../sepolicy/sepolicy/gui.py:2354 ../sepolicy/sepolicy/sepolicy.glade:129
#: ../sepolicy/sepolicy/sepolicy.glade:1898
#: ../sepolicy/sepolicy/sepolicy.glade:3793
msgid "System"
msgstr "系統"

#: ../sepolicy/sepolicy/gui.py:2363 ../sepolicy/sepolicy/sepolicy.glade:95
msgid "File Equivalence"
msgstr "檔案相等"

#: ../sepolicy/sepolicy/gui.py:2373 ../sepolicy/sepolicy/sepolicy.glade:112
msgid "Users"
msgstr "使用者"

#: ../sepolicy/sepolicy/gui.py:2426
#, python-format
msgid ""
"Run restorecon on %(PATH)s to change its type from %(CUR_CONTEXT)s to the "
"default %(DEF_CONTEXT)s?"
msgstr ""
"在 %(PATH)s 上執行 restorecon 以將其類型由 %(CUR_CONTEXT)s 修改為預設的 "
"%(DEF_CONTEXT)s？"

#: ../sepolicy/sepolicy/gui.py:2436 ../sepolicy/sepolicy/sepolicy.glade:4216
msgid "Update"
msgstr "更新"

#: ../sepolicy/sepolicy/gui.py:2438
msgid "Update Changes"
msgstr "更新變更"

#: ../sepolicy/sepolicy/gui.py:2440
msgid "Revert Changes"
msgstr "復原變更"

#: ../sepolicy/sepolicy/gui.py:2571
msgid "System Status: Enforcing"
msgstr "系統狀態：強制"

#: ../sepolicy/sepolicy/gui.py:2574
msgid "System Status: Permissive"
msgstr "系統狀態：寬容"

#: ../sepolicy/sepolicy/gui.py:2638
msgid ""
"Changing the policy type will cause a relabel of the entire file system on "
"the next boot. Relabeling takes a long time depending on the size of the "
"file system.  Do you wish to continue?"
msgstr ""
"變更方針類型會在下次開機時，重新標記整個檔案系統。根據檔案系統的大小，重新標"
"記會花上不少時間。\n"
"確定要繼續？"

#: ../sepolicy/sepolicy/gui.py:2768
msgid ""
"Changing to SELinux disabled requires a reboot.  It is not recommended.  If "
"you later decide to turn SELinux back on, the system will be required to "
"relabel.  If you just want to see if SELinux is causing a problem on your "
"system, you can go to permissive mode which will only log errors and not "
"enforce SELinux policy.  Permissive mode does not require a reboot.  Do you "
"wish to continue?"
msgstr ""
"停用 SELinux 後需要重新開機。不建議您這麼做。如果您之後決定再度啟用 SELinux，"
"系統將會需要再重新標記。如果您只是想知道 SELinux 是否導致系統發生問題，您可以"
"切換到寬容模式，只記錄錯誤但不使用 SELinux 方針。切換到寬容模式無須重新開機。"
"確定要繼續？"

#: ../sepolicy/sepolicy/gui.py:2772
msgid ""
"Changing to SELinux enabled will cause a relabel of the entire file system "
"on the next boot. Relabeling takes a long time depending on the size of the "
"file system.  Do you wish to continue?"
msgstr ""
"啟用 SELinux 會在下次開機時，重新標記整個檔案系統。根據檔案系統的大小，重新標"
"記會花上不少時間。\n"
"確定要繼續？"

#: ../sepolicy/sepolicy/gui.py:2802
msgid ""
"You are attempting to close the application without applying your changes.\n"
"    *    To apply changes you have made during this session, click No and "
"click Update.\n"
"    *    To leave the application without applying your changes, click Yes.  "
"All changes that you have made during this session will be lost."
msgstr ""
"您正嘗試在未套用變更的情況下，關閉此應用程式。\n"
"    *    若要套用您在此工作階段中所進行的變更，請點選「否」並點選「更新」。\n"
"    *    若要在不套用變更的情況下退出應用程式，請點選「是」。您將會失去在此工"
"作階段中所進行的所有變更。"

#: ../sepolicy/sepolicy/gui.py:2802
msgid "Loss of data Dialog"
msgstr "資料遺失對話盒"

#: ../sepolicy/sepolicy/__init__.py:84
msgid "regular file"
msgstr "正規檔案"

#: ../sepolicy/sepolicy/__init__.py:85
msgid "directory"
msgstr "目錄"

#: ../sepolicy/sepolicy/__init__.py:86
msgid "character device"
msgstr "字元裝置"

#: ../sepolicy/sepolicy/__init__.py:87
msgid "block device"
msgstr "區塊裝置"

#: ../sepolicy/sepolicy/__init__.py:88
msgid "socket file"
msgstr "socket 檔案"

#: ../sepolicy/sepolicy/__init__.py:89
msgid "symbolic link"
msgstr "符號連結"

#: ../sepolicy/sepolicy/__init__.py:90
msgid "named pipe"
msgstr "named pipe"

#: ../sepolicy/sepolicy/__init__.py:148
msgid "No SELinux Policy installed"
msgstr "尚未安裝 SELinux 方針"

#: ../sepolicy/sepolicy/__init__.py:184
#, python-format
msgid "Failed to read %s policy file"
msgstr "無法讀取 %s 方針檔案"

#: ../sepolicy/sepolicy/__init__.py:465
#, python-format
msgid "-- Allowed %s [ %s ]"
msgstr "-- 允許 %s [ %s ]"

#: ../sepolicy/sepolicy/__init__.py:891
msgid "You must regenerate interface info by running /usr/bin/sepolgen-ifgen"
msgstr "您必須透過執行 /usr/bin/sepolgen-ifgen 來重新產生介面卡資訊"

#: ../sepolicy/sepolicy/__init__.py:1216
msgid "unknown"
msgstr "不明"

#: ../sepolicy/sepolicy/interface.py:222
#, python-format
msgid "Compiling %s interface"
msgstr "編譯 %s 接口"

#: ../sepolicy/sepolicy/interface.py:230
#, python-format
msgid ""
"\n"
"Compile test for %s failed.\n"
msgstr ""
"\n"
"編譯測試 %s 失敗。\n"

#: ../sepolicy/sepolicy/interface.py:233
#, python-format
msgid ""
"\n"
"Compile test for %s has not run. %s\n"
msgstr ""
"\n"
"編譯測試 %s 還沒跑。 %s\n"

#: ../sepolicy/sepolicy/interface.py:239
#, python-format
msgid ""
"\n"
"Compiling of %s interface is not supported."
msgstr ""
"\n"
"編譯 %s 界面不受支持。"

#: ../sepolicy/sepolicy.py:220
#, python-format
msgid "Interface %s does not exist."
msgstr "介面卡 %s 不存在。"

#: ../sepolicy/sepolicy.py:317
msgid "You need to install policycoreutils-gui package to use the gui option"
msgstr "您需要安裝 policycoreutils-gui 軟體包才能使用 gui 選項"

#: ../sepolicy/sepolicy.py:322
msgid "Graphical User Interface for SELinux Policy"
msgstr "SELinux 方針的圖形化使用者介面"

#: ../sepolicy/sepolicy.py:325 ../sepolicy/sepolicy.py:380
msgid "Domain name(s) of man pages to be created"
msgstr "欲建立之 man page 的區域名稱"

#: ../sepolicy/sepolicy.py:343
msgid "Alternative root needs to be setup"
msgstr "需要設置額外的 root"

#: ../sepolicy/sepolicy.py:362
msgid "Generate SELinux man pages"
msgstr "產生 SELinux man page"

#: ../sepolicy/sepolicy.py:365
msgid "path in which the generated SELinux man pages will be stored"
msgstr "產生 SELinux man page 的路徑會被儲存"

#: ../sepolicy/sepolicy.py:367
msgid "name of the OS for man pages"
msgstr "man page 的 OS名稱"

#: ../sepolicy/sepolicy.py:369
msgid "Generate HTML man pages structure for selected SELinux man page"
msgstr "為所選擇的 SELinux man page 產生 HTML man page 結構"

#: ../sepolicy/sepolicy.py:371
msgid "Alternate root directory, defaults to /"
msgstr "其它 root 目錄，預設值為 /"

#: ../sepolicy/sepolicy.py:373
msgid ""
"With this flag, alternative root path needs to include file context files "
"and policy.xml file"
msgstr "因為此旗標，額外的 root 路徑需要包含檔案的情境檔和 policy.xml 檔"

#: ../sepolicy/sepolicy.py:377
msgid "All domains"
msgstr "所有區域"

#: ../sepolicy/sepolicy.py:386
msgid "Query SELinux policy network information"
msgstr "查詢 SELinux 方針網路資訊"

#: ../sepolicy/sepolicy.py:391
msgid "list all SELinux port types"
msgstr "列出所有 SELinux 連接埠類型"

#: ../sepolicy/sepolicy.py:394
msgid "show SELinux type related to the port"
msgstr "顯示與此連接埠相關的 SELinux 類型"

#: ../sepolicy/sepolicy.py:397
msgid "Show ports defined for this SELinux type"
msgstr "顯示為此 SELinux 類型定義的連接埠"

#: ../sepolicy/sepolicy.py:400
msgid "show ports to which this domain can bind and/or connect"
msgstr "顯示此區域可以綁定且/或可以連接的連接埠"

#: ../sepolicy/sepolicy.py:403
msgid "show ports to which this application can bind and/or connect"
msgstr "顯示此應用程式可綁定至與/或連上的連接埠"

#: ../sepolicy/sepolicy.py:420
msgid "query SELinux policy to see if domains can communicate with each other"
msgstr "查詢 SELinux 方針，以查看區域間是否可以互相進行通訊"

#: ../sepolicy/sepolicy.py:423
msgid "Source Domain"
msgstr "來源區域"

#: ../sepolicy/sepolicy.py:426
msgid "Target Domain"
msgstr "目標區域"

#: ../sepolicy/sepolicy.py:447
msgid "query SELinux Policy to see description of booleans"
msgstr "查詢 SELinux 方針，以檢視布林值的描述"

#: ../sepolicy/sepolicy.py:451
msgid "get all booleans descriptions"
msgstr "取得所有布林值的詳述"

#: ../sepolicy/sepolicy.py:454
msgid "boolean to get description"
msgstr "取得描述的布林值"

#: ../sepolicy/sepolicy.py:466
msgid ""
"query SELinux Policy to see how a source process domain can transition to "
"the target process domain"
msgstr "查詢 SELinux 政策，看看來源程序區域如何翻譯至目標程序區域"

#: ../sepolicy/sepolicy.py:469
msgid "source process domain"
msgstr "來源程序區域"

#: ../sepolicy/sepolicy.py:472
msgid "target process domain"
msgstr "目標程序區域"

#: ../sepolicy/sepolicy.py:517
#, python-format
msgid "sepolicy generate: error: one of the arguments %s is required"
msgstr "sepolicy 生成：錯誤：缺少了其中一項引數 %s"

#: ../sepolicy/sepolicy.py:522
msgid "Command required for this type of policy"
msgstr "此類型方針所需要的指令"

#: ../sepolicy/sepolicy.py:533
#, python-format
msgid ""
"-t option can not be used with '%s' domains. Read usage for more details."
msgstr "-t 選項不可與「%s」區域搭配使用。詳情請參閱「用法」。"

#: ../sepolicy/sepolicy.py:538
#, python-format
msgid ""
"-d option can not be used with '%s' domains. Read usage for more details."
msgstr "-d 選項不可與「%s」區域搭配使用。請詳請參閱「用法」。"

#: ../sepolicy/sepolicy.py:542
#, python-format
msgid ""
"-a option can not be used with '%s' domains. Read usage for more details."
msgstr "-a 選項不可與「%s」區域搭配使用。詳情請參閱「用法」。"

#: ../sepolicy/sepolicy.py:546
msgid "-w option can not be used with the --newtype option"
msgstr "-w 選項不可與 --newtype 選項搭配使用"

#: ../sepolicy/sepolicy.py:567
msgid "List SELinux Policy interfaces"
msgstr "列出 SELinux 方針介面"

#: ../sepolicy/sepolicy.py:587
msgid "Enter interface names, you wish to query"
msgstr "請輸入您想查詢的介面名稱。"

#: ../sepolicy/sepolicy.py:597
msgid "Generate SELinux Policy module template"
msgstr "產生 SELinux 方針的模組範本"

#: ../sepolicy/sepolicy.py:600
msgid "Enter domain type which you will be extending"
msgstr "輸入您將會延伸的區域類型"

#: ../sepolicy/sepolicy.py:603
msgid "Enter SELinux user(s) which will transition to this domain"
msgstr "輸入將會轉移此區域的 SELinux 使用者"

#: ../sepolicy/sepolicy.py:606
msgid "Enter SELinux role(s) to which the administror domain will transition"
msgstr "輸入管理區域將會轉移成的 SELinux 角色"

#: ../sepolicy/sepolicy.py:609
msgid "Enter domain(s) which this confined admin will administrate"
msgstr "輸入此受限的管理員將管理的區域"

#: ../sepolicy/sepolicy.py:612
msgid "name of policy to generate"
msgstr "欲產生的方針名稱"

#: ../sepolicy/sepolicy.py:619
msgid "path in which the generated policy files will be stored"
msgstr "所產生的方針檔案將會被存放在此路徑"

#: ../sepolicy/sepolicy.py:621
msgid "path to which the confined processes will need to write"
msgstr "受限的程序需寫入的路徑"

#: ../sepolicy/sepolicy.py:622
msgid "Policy types which require a command"
msgstr "需要輸入一項指令的方針類型"

#: ../sepolicy/sepolicy.py:626 ../sepolicy/sepolicy.py:629
#: ../sepolicy/sepolicy.py:632 ../sepolicy/sepolicy.py:635
#: ../sepolicy/sepolicy.py:638 ../sepolicy/sepolicy.py:644
#: ../sepolicy/sepolicy.py:647 ../sepolicy/sepolicy.py:650
#: ../sepolicy/sepolicy.py:656 ../sepolicy/sepolicy.py:659
#: ../sepolicy/sepolicy.py:662 ../sepolicy/sepolicy.py:665
#, python-format
msgid "Generate '%s' policy"
msgstr "生成「%s」方針"

#: ../sepolicy/sepolicy.py:653
#, python-format
msgid "Generate '%s' policy "
msgstr "生成「%s」方針"

#: ../sepolicy/sepolicy.py:667
msgid "executable to confine"
msgstr "欲限制的可執行檔"

#: ../sepolicy/sepolicy.py:672
msgid "commands"
msgstr "指令"

#: ../sepolicy/sepolicy.py:675
msgid "Alternate SELinux policy, defaults to /sys/fs/selinux/policy"
msgstr "替代用 SELinux 方針，預設值為 /sys/fs/selinux/policy"

#: ../sepolicy/sepolicy/sepolicy.glade:25
#: ../sepolicy/sepolicy/sepolicy.glade:4320
msgid "Applications"
msgstr "應用程式"

#: ../sepolicy/sepolicy/sepolicy.glade:52
msgid "Select domain"
msgstr "選擇區域"

#: ../sepolicy/sepolicy/sepolicy.glade:189
#: ../sepolicy/sepolicy/sepolicy.glade:4357
#: ../sepolicy/sepolicy/sepolicy.glade:4450
#: ../sepolicy/sepolicy/sepolicy.glade:4596
#: ../sepolicy/sepolicy/sepolicy.glade:4745
#: ../sepolicy/sepolicy/sepolicy.glade:4879
#: ../sepolicy/sepolicy/sepolicy.glade:5020
#: ../sepolicy/sepolicy/sepolicy.glade:5093
#: ../sepolicy/sepolicy/sepolicy.glade:5228
msgid "Select"
msgstr "選擇"

#: ../sepolicy/sepolicy/sepolicy.glade:204
#: ../sepolicy/sepolicy/sepolicy.glade:539
#: ../sepolicy/sepolicy/sepolicy.glade:684
#: ../sepolicy/sepolicy/sepolicy.glade:1239
#: ../sepolicy/sepolicy/sepolicy.glade:1535
#: ../sepolicy/sepolicy/sepolicy.glade:4530
#: ../sepolicy/sepolicy/sepolicy.glade:4680
#: ../sepolicy/sepolicy/sepolicy.glade:4811
#: ../sepolicy/sepolicy/sepolicy.glade:4945
#: ../sepolicy/sepolicy/sepolicy.glade:5163
#: ../sepolicy/sepolicy/sepolicy.glade:5294
#: ../sepolicy/sepolicy/sepolicy.glade:5454
msgid "Cancel"
msgstr "取消"

#: ../sepolicy/sepolicy/sepolicy.glade:332
msgid ""
"The entry that was entered is incorrect.  Please try again in the "
"ex:/.../... format."
msgstr "輸入的項目錯誤。請以 ex:/.../... 格式再試一次。"

#: ../sepolicy/sepolicy/sepolicy.glade:358
msgid "Retry"
msgstr "重試"

#: ../sepolicy/sepolicy/sepolicy.glade:442
#: ../sepolicy/sepolicy/sepolicy.glade:1120
#: ../sepolicy/sepolicy/sepolicy.glade:1368
#: ../sepolicy/sepolicy/sepolicy.glade:5322
msgid "Network Port Definitions"
msgstr "網路連接埠定義"

#: ../sepolicy/sepolicy/sepolicy.glade:458
msgid ""
"Add file Equivalence Mapping.  Mapping will be created when Update is "
"applied."
msgstr "新增檔案相等對映。當更新套用後，對映便會被建立。"

#: ../sepolicy/sepolicy/sepolicy.glade:483
#: ../sepolicy/sepolicy/sepolicy.glade:4036
msgid "Path"
msgstr "路徑"

#: ../sepolicy/sepolicy/sepolicy.glade:493
#: ../sepolicy/sepolicy/sepolicy.glade:5374
msgid ""
"Specify a new SELinux user name.  By convention SELinux User names usually "
"end in an _u."
msgstr ""
"指定一組新的 SELinux 使用者名稱。一般 SELinux 使用者名稱會以 an _u 作為結尾。"

#: ../sepolicy/sepolicy/sepolicy.glade:497
msgid "Enter the path to which you want to setup an equivalence label."
msgstr "輸入您希望為其設置相等標籤的路徑。"

#: ../sepolicy/sepolicy/sepolicy.glade:510
#: ../sepolicy/sepolicy/sepolicy.glade:4053
#: ../sepolicy/sepolicy/sepolicy.glade:4771
msgid "Equivalence Path"
msgstr "相等路徑"

#: ../sepolicy/sepolicy/sepolicy.glade:524
#: ../sepolicy/sepolicy/sepolicy.glade:669
#: ../sepolicy/sepolicy/sepolicy.glade:1224
#: ../sepolicy/sepolicy/sepolicy.glade:1520
#: ../sepolicy/sepolicy/sepolicy.glade:5439
msgid "Save to update"
msgstr "儲存至更新"

#: ../sepolicy/sepolicy/sepolicy.glade:564
msgid ""
"Specify the mapping between the new path and the equivalence path.  "
"Everything under this new path will be labeled as if they were under the "
"equivalence path."
msgstr ""
"指定新路徑和相等路徑之間的對映。所有在此新路徑下的項目皆會被標記，如同在相等"
"路徑下一般。"

#: ../sepolicy/sepolicy/sepolicy.glade:621
msgid "Add a file"
msgstr "新增檔案"

#: ../sepolicy/sepolicy/sepolicy.glade:638
msgid ""
"<operation> File Labeling for <selected domain>. File labels will be created "
"when update is applied."
msgstr ""
"<operation> <selected domain> 的檔案標籤。當更新套用之後，檔案標籤便會被建"
"立。"

#: ../sepolicy/sepolicy/sepolicy.glade:711
#: ../sepolicy/sepolicy/sepolicy.glade:1485
msgid "MLS"
msgstr "MLS"

#: ../sepolicy/sepolicy/sepolicy.glade:747
#: ../sepolicy/sepolicy/sepolicy.glade:2306
#: ../sepolicy/sepolicy/sepolicy.glade:2418
#: ../sepolicy/sepolicy/sepolicy.glade:2540
#: ../sepolicy/sepolicy/sepolicy.glade:4490
msgid "Class"
msgstr "類別"

#: ../sepolicy/sepolicy/sepolicy.glade:763
msgid "Type"
msgstr "類型"

#: ../sepolicy/sepolicy/sepolicy.glade:777
msgid ""
"Select the file class to which this label will be applied.  Defaults to all "
"classes."
msgstr "選擇此標籤將會被套用至的檔案類別。預設值為所有類別。"

#: ../sepolicy/sepolicy/sepolicy.glade:804
msgid "Make Path Recursive"
msgstr "讓路徑遞迴"

#: ../sepolicy/sepolicy/sepolicy.glade:808
msgid ""
"Select Make Path Recursive if you want to apply this label to all children "
"of the specified directory path. objects under the directory to have this "
"label."
msgstr ""
"若您希望將此標籤套用至所有指定目錄路徑的子路徑上，請選擇「使路徑遞迴」。此目"
"錄下的物件將會擁有此標籤。"

#: ../sepolicy/sepolicy/sepolicy.glade:821
msgid "Browse"
msgstr "瀏覽"

#: ../sepolicy/sepolicy/sepolicy.glade:825
msgid "Browse to select the file/directory for labeling."
msgstr "瀏覽以選擇欲標記的檔案/目錄。"

#: ../sepolicy/sepolicy/sepolicy.glade:869
msgid "Path  "
msgstr "路徑"

#: ../sepolicy/sepolicy/sepolicy.glade:880
msgid ""
"Specify the path using regular expressions that you would like to modify the "
"labeling."
msgstr "使用正規表示式來指定您希望為其修改標籤的路徑。"

#: ../sepolicy/sepolicy/sepolicy.glade:902
msgid "Select the SELinux file type to assign to this path."
msgstr "選擇欲指派給此路徑的檔案類型。"

#: ../sepolicy/sepolicy/sepolicy.glade:929
msgid "Enter the MLS Label to assign to this file path."
msgstr "輸入 MLS 標籤以將它指派給此檔案路徑。"

#: ../sepolicy/sepolicy/sepolicy.glade:933
msgid "SELinux MLS Label you wish to assign to this path."
msgstr "想要指派至此路徑的 SELinux MLS 標籤。"

#: ../sepolicy/sepolicy/sepolicy.glade:1070
msgid "Analyzing Policy..."
msgstr "正在分析方針..."

#: ../sepolicy/sepolicy/sepolicy.glade:1137
msgid ""
"Add Login Mapping. Login Mapping will be created when update is applied."
msgstr "新增登入對應。套用更新後會建立登入對應。"

#: ../sepolicy/sepolicy/sepolicy.glade:1172
msgid ""
"Enter the login user name of the user to which you wish to add SELinux User "
"confinement."
msgstr "輸入您想要新增 SELinux 受限使用者之使用者登入名稱。"

#: ../sepolicy/sepolicy/sepolicy.glade:1201
msgid ""
"Select the SELinux User to assign to this login user.  Login users by "
"default get assigned by the __default__ user."
msgstr ""
"選擇要指定至此登入使用者的 SELinux 使用者。預設上，登入使用者會由 "
"__default__ 使用者所指定。"

#: ../sepolicy/sepolicy/sepolicy.glade:1264
msgid ""
"Enter MLS/MCS Range for this login User.  Defaults to the range for the "
"Selected SELinux User."
msgstr ""
"輸入此登入使用者的 MLS/MCS 範圍。預設值是所選擇的 SELinux 使用者之範圍。"

#: ../sepolicy/sepolicy/sepolicy.glade:1267
#: ../sepolicy/sepolicy/sepolicy.glade:3182
#: ../sepolicy/sepolicy/sepolicy.glade:3303
#: ../sepolicy/sepolicy/sepolicy.glade:5404
msgid "MLS Range"
msgstr "MLS 範圍"

#: ../sepolicy/sepolicy/sepolicy.glade:1279
msgid ""
"Specify the MLS Range for this user to login in with.  Defaults to the "
"selected SELinux Users MLS Range."
msgstr ""
"指定此使用者登入時使用的 MLS 範圍。預設值是所選擇的 SELinux 使用者之 MLS 範"
"圍。"

#: ../sepolicy/sepolicy/sepolicy.glade:1385
msgid ""
"<operation> Network Port for <selected domain>.  Ports will be created when "
"update is applied."
msgstr ""
"<operation> 給 <selected domain> 所使用的網路連接埠。套用更新時會建立連接埠。"

#: ../sepolicy/sepolicy/sepolicy.glade:1423
msgid "Enter the port number or range to which you want to add a port type."
msgstr "輸入要新增至連接埠類型的連接埠號碼或範圍。"

#: ../sepolicy/sepolicy/sepolicy.glade:1439
#: ../sepolicy/sepolicy/sepolicy.glade:2658
#: ../sepolicy/sepolicy/sepolicy.glade:2756
#: ../sepolicy/sepolicy/sepolicy.glade:4623
msgid "Protocol"
msgstr "通訊協定"

#: ../sepolicy/sepolicy/sepolicy.glade:1453
msgid "Port Type"
msgstr "連接埠類型"

#: ../sepolicy/sepolicy/sepolicy.glade:1498
msgid "Select the port type you want to assign to the specified port number."
msgstr "選擇要指定到特定連接埠號的連接埠類型。"

#: ../sepolicy/sepolicy/sepolicy.glade:1562
msgid "tcp"
msgstr "tcp"

#: ../sepolicy/sepolicy/sepolicy.glade:1566
msgid ""
"Select <b>tcp</b> if the port type should be assigned to tcp port numbers."
msgstr "如果連接埠類型該指定到 TCP 埠號的話，請選擇 <b>tcp</b>。"

#: ../sepolicy/sepolicy/sepolicy.glade:1579
msgid "udp"
msgstr "udp"

#: ../sepolicy/sepolicy/sepolicy.glade:1583
msgid ""
"Select <b>udp</b> if the port type should be assigned to udp port numbers."
msgstr "如果連接埠類型該指定到 UDP 埠號的話，請選擇 <b>udp</b>。"

#: ../sepolicy/sepolicy/sepolicy.glade:1605
msgid "Enter the MLS Label to assign to this port."
msgstr "輸入要指定至此連接埠的 MLS 標籤。"

#: ../sepolicy/sepolicy/sepolicy.glade:1707
msgid "SELinux Configuration"
msgstr "SELinux 組態"

#: ../sepolicy/sepolicy/sepolicy.glade:1743
msgid "Select..."
msgstr "選擇..."

#: ../sepolicy/sepolicy/sepolicy.glade:1792
#: ../sepolicy/sepolicy/sepolicy.glade:2212
msgid "Booleans"
msgstr "布林值"

#: ../sepolicy/sepolicy/sepolicy.glade:1796
msgid ""
"Display boolean information that can be used to modify the policy for the "
"'selected domain'."
msgstr "顯示可以用來修改「選擇區域」的方針之布林值資訊。"

#: ../sepolicy/sepolicy/sepolicy.glade:1810
#: ../sepolicy/sepolicy/sepolicy.glade:2597
msgid "Files"
msgstr "檔案"

#: ../sepolicy/sepolicy/sepolicy.glade:1814
msgid ""
"Display file type information that can be used by the 'selected domain'."
msgstr "顯示可以用於「選擇區域」的檔案類型資訊。"

#: ../sepolicy/sepolicy/sepolicy.glade:1828
#: ../sepolicy/sepolicy/sepolicy.glade:2830
msgid "Network"
msgstr "網路"

#: ../sepolicy/sepolicy/sepolicy.glade:1832
msgid ""
"Display network ports to which the 'selected domain' can connect or listen "
"to."
msgstr "顯示「選擇區域」可以連接或聆聽的網路連接埠。"

#: ../sepolicy/sepolicy/sepolicy.glade:1846
#: ../sepolicy/sepolicy/sepolicy.glade:3111
msgid "Transitions"
msgstr "轉移"

#: ../sepolicy/sepolicy/sepolicy.glade:1850
msgid ""
"Display applications that can transition into or out of the 'selected "
"domain'."
msgstr "顯示可以轉移進、出「選擇區域」的應用程式。"

#: ../sepolicy/sepolicy/sepolicy.glade:1864
#: ../sepolicy/sepolicy/sepolicy.glade:3212
msgid "Login Mapping"
msgstr "登入對映"

#: ../sepolicy/sepolicy/sepolicy.glade:1867
#: ../sepolicy/sepolicy/sepolicy.glade:1884
#: ../sepolicy/sepolicy/sepolicy.glade:1901
msgid "Manage the SELinux configuration"
msgstr "管理 SELinux 組態"

#: ../sepolicy/sepolicy/sepolicy.glade:1881
#: ../sepolicy/sepolicy/sepolicy.glade:3334
msgid "SELinux Users"
msgstr "SELinux 使用者"

#: ../sepolicy/sepolicy/sepolicy.glade:1915
#: ../sepolicy/sepolicy/sepolicy.glade:4006
msgid "Lockdown"
msgstr "封鎖"

#: ../sepolicy/sepolicy/sepolicy.glade:1918
msgid ""
"Lockdown the SELinux System.\n"
"This screen can be used to turn up the SELinux Protections."
msgstr ""
"封鎖 SELinux 系統。\n"
"這畫面可以用來帶起 SELinux 防護。"

#: ../sepolicy/sepolicy/sepolicy.glade:1933
msgid "radiobutton"
msgstr "多選按鈕"

#: ../sepolicy/sepolicy/sepolicy.glade:1993
msgid "Filter"
msgstr "篩選"

#: ../sepolicy/sepolicy/sepolicy.glade:2021
msgid "Show Modified Only"
msgstr "僅顯示修改過的"

#: ../sepolicy/sepolicy/sepolicy.glade:2060
msgid "Mislabeled files exist"
msgstr "有標示錯誤的檔案"

#: ../sepolicy/sepolicy/sepolicy.glade:2080
msgid "Show mislabeled files only"
msgstr "僅顯示標示錯誤的檔案"

#: ../sepolicy/sepolicy/sepolicy.glade:2120
#: ../sepolicy/sepolicy/sepolicy.glade:3234
msgid ""
"If-Then-Else rules written in policy that can\n"
"allow alternative access control."
msgstr ""
"方針中撰寫的 If-Then-Else 規則\n"
"允許替代的存取控制。"

#: ../sepolicy/sepolicy/sepolicy.glade:2132
msgid "Enabled"
msgstr "已啟用"

#: ../sepolicy/sepolicy/sepolicy.glade:2183
msgid "Name"
msgstr "名稱"

#: ../sepolicy/sepolicy/sepolicy.glade:2252
#: ../sepolicy/sepolicy/sepolicy.glade:2364
#: ../sepolicy/sepolicy/sepolicy.glade:2482
#: ../sepolicy/sepolicy/sepolicy.glade:4463
#: ../sepolicy/sepolicy/sepolicy.glade:4758
msgid "File Path"
msgstr "檔案路徑"

#: ../sepolicy/sepolicy/sepolicy.glade:2288
#: ../sepolicy/sepolicy/sepolicy.glade:2399
msgid "SELinux File Type"
msgstr "SELinux 檔案類型"

#: ../sepolicy/sepolicy/sepolicy.glade:2332
msgid "File path used to enter the 'selected domain'."
msgstr "用於輸入「選擇區域」的檔案路徑。"

#: ../sepolicy/sepolicy/sepolicy.glade:2333
msgid "Executable Files"
msgstr "可執行檔"

#: ../sepolicy/sepolicy/sepolicy.glade:2448
msgid "Files to which the 'selected domain' can write."
msgstr "「選擇區域」可以寫入的檔案。"

#: ../sepolicy/sepolicy/sepolicy.glade:2449
msgid "Writable files"
msgstr "可寫入檔"

#: ../sepolicy/sepolicy/sepolicy.glade:2571
msgid "File Types defined for the 'selected domain'."
msgstr "為「選擇區域」所定義的檔案類型。"

#: ../sepolicy/sepolicy/sepolicy.glade:2572
msgid "Application File Types"
msgstr "應用程式檔案類型"

#: ../sepolicy/sepolicy/sepolicy.glade:2639
#: ../sepolicy/sepolicy/sepolicy.glade:2738
#: ../sepolicy/sepolicy/sepolicy.glade:4609
msgid "Port"
msgstr "連接埠"

#: ../sepolicy/sepolicy/sepolicy.glade:2704
msgid "Network Ports to which the 'selected domain' is allowed to connect."
msgstr "「選擇區域」所允許連接至的網路連接埠。"

#: ../sepolicy/sepolicy/sepolicy.glade:2705
msgid "Outbound"
msgstr "傳出"

#: ../sepolicy/sepolicy/sepolicy.glade:2804
msgid "Network Ports to which the 'selected domain' is allowed to listen."
msgstr "「選擇區域」所允許監聽的網路連接埠。"

#: ../sepolicy/sepolicy/sepolicy.glade:2805
msgid "Inbound"
msgstr "傳入"

#: ../sepolicy/sepolicy/sepolicy.glade:2866
#: ../sepolicy/sepolicy/sepolicy.glade:2946
msgid ""
"Boolean\n"
"Enabled"
msgstr ""
"布林值 \n"
"已啟用"

#: ../sepolicy/sepolicy/sepolicy.glade:2882
#: ../sepolicy/sepolicy/sepolicy.glade:2978
msgid "Executable File"
msgstr "可執行檔"

#: ../sepolicy/sepolicy/sepolicy.glade:2899
msgid "SELinux Application Type"
msgstr "SELinux 應用程式類型"

#: ../sepolicy/sepolicy/sepolicy.glade:2920
msgid ""
"Executables which will transition to a different domain, when the 'selected "
"domain' executes them."
msgstr "在「選擇區域」執行時，會轉移到不同區域的可執行檔。"

#: ../sepolicy/sepolicy/sepolicy.glade:2923
msgid "Application Transitions From 'select domain'"
msgstr "由「選擇區域」進行應用程式轉移"

#: ../sepolicy/sepolicy/sepolicy.glade:2962
msgid "Calling Process Domain"
msgstr "呼叫程序區域"

#: ../sepolicy/sepolicy/sepolicy.glade:3002
msgid ""
"Executables which will transition to the 'selected domain', when executing a "
"selected domains entrypoint."
msgstr "在執行選擇區域的進入點時，會轉移到「選擇區域」的可執行檔。"

#: ../sepolicy/sepolicy/sepolicy.glade:3003
msgid "Application Transitions Into 'select domain'"
msgstr "轉移至「選擇區域」的應用程式"

#: ../sepolicy/sepolicy/sepolicy.glade:3018
msgid ""
"File Transitions define what happens when the current domain creates the "
"content of a particular class in a directory of the destination type. "
"Optionally a file name could be specified for the transition."
msgstr ""
"「檔案轉移」定義了當現有區域在目的類型的目錄中，建立特定類別的內容時會發生什"
"麼事。使用者也可指定要轉移的檔名。"

#: ../sepolicy/sepolicy/sepolicy.glade:3026
msgid "SELinux Directory Type"
msgstr "SELinux 目錄類型"

#: ../sepolicy/sepolicy/sepolicy.glade:3039
msgid "Destination Class"
msgstr "目的地類別"

#: ../sepolicy/sepolicy/sepolicy.glade:3053
msgid "SELinux Destination Type"
msgstr "SELinux 目的地類型"

#: ../sepolicy/sepolicy/sepolicy.glade:3066
msgid "File Name"
msgstr "檔名"

#: ../sepolicy/sepolicy/sepolicy.glade:3088
msgid "File Transitions From 'select domain'"
msgstr "來自「選擇區域」的檔案轉移"

#: ../sepolicy/sepolicy/sepolicy.glade:3287
#: ../sepolicy/sepolicy/sepolicy.glade:5498
msgid "Default Level"
msgstr "預設等級"

#: ../sepolicy/sepolicy/sepolicy.glade:3373
msgid "Select the system mode when the system first boots up"
msgstr "選擇系統第一次啟動時的系統模式"

#: ../sepolicy/sepolicy/sepolicy.glade:3385
#: ../sepolicy/sepolicy/sepolicy.glade:3459
msgid "Enforcing"
msgstr "強制"

#: ../sepolicy/sepolicy/sepolicy.glade:3404
#: ../sepolicy/sepolicy/sepolicy.glade:3477
msgid "Permissive"
msgstr "寬容"

#: ../sepolicy/sepolicy/sepolicy.glade:3446
msgid "Select the system mode for the current session"
msgstr "為目前的工作階段選擇系統模式"

#: ../sepolicy/sepolicy/sepolicy.glade:3523
msgid "System Policy Type:"
msgstr "系統方針類型："

#: ../sepolicy/sepolicy/sepolicy.glade:3584
msgid "<b>System Mode</b>"
msgstr "<b>系統模式</b>"

#: ../sepolicy/sepolicy/sepolicy.glade:3622
msgid "Import system settings from another machine"
msgstr "從另一台機器匯入系統設定"

#: ../sepolicy/sepolicy/sepolicy.glade:3630
msgid "Import"
msgstr "匯入"

#: ../sepolicy/sepolicy/sepolicy.glade:3649
msgid "Export system settings to a file"
msgstr "將系統設定匯出為檔案"

#: ../sepolicy/sepolicy/sepolicy.glade:3659
msgid "Export"
msgstr "匯出"

#: ../sepolicy/sepolicy/sepolicy.glade:3678
msgid "Relabel all files back to system defaults on reboot"
msgstr "將所有檔案重新標示為預設值，供重新開機後使用"

#: ../sepolicy/sepolicy/sepolicy.glade:3773
msgid "<b>System Configuration</b>"
msgstr "<b>系統組態</b>"

#: ../sepolicy/sepolicy/sepolicy.glade:3820
#: ../sepolicy/sepolicy/sepolicy.glade:3838
msgid ""
"An unconfined domain is a process label that allows the process to do what "
"it wants, without SELinux interfering.  Applications started at boot by the "
"init system that SELinux do not have defined SELinux policy will run as "
"unconfined if this module is enabled.  Disabling it means all daemons will "
"now be confined.  To disable the unconfined_t user you must first remove "
"unconfined_t from the users/login screens."
msgstr ""
"未受限的區域是程序標籤，允許程序做想做的事，而不受到 SELinux 的干預。啟動時"
"由 init 系統所執行、但沒有定義 SELinux 方針的應用程式會以未受限的方式執行，前"
"提是已啟用此模組。停用這模組表示所有幕後程式都會受限。要停用 unconfined_t 使"
"用者，您必須先從使用者 / 登入畫面移除 unconfined_t。"

#: ../sepolicy/sepolicy/sepolicy.glade:3856
msgid "<b>Disable ability to run unconfined system processes?</b>"
msgstr "<b>停用執行未受限系統程序的能力？</b>"

#: ../sepolicy/sepolicy/sepolicy.glade:3884
#: ../sepolicy/sepolicy/sepolicy.glade:3901
#: ../sepolicy/sepolicy/sepolicy.glade:3947
#: ../sepolicy/sepolicy/sepolicy.glade:3964
msgid ""
"A permissive domain is a process label that allows the process to do what it "
"wants, with SELinux only logging the denials, but not enforcing them.  "
"Usually permissive domains indicate experimental policy, disabling the "
"module could cause SELinux to deny access to a domain, that should be "
"allowed."
msgstr ""
"寬容區域是程序標籤，允許程序做其想做之事，而 SELinux 只會紀錄阻絕這件事，但不"
"強制。通常寬容區域意味著實驗性方針，停用模組會導致 SELinux 阻絕存取區域，但這"
"應該是被允許的。"

#: ../sepolicy/sepolicy/sepolicy.glade:3919
msgid "<b>Disable all permissive processes?</b>"
msgstr "<b>停用所有寬容程序？</b>"

#: ../sepolicy/sepolicy/sepolicy.glade:3985
msgid "<b>Deny all processes from ptracing or debugging other processes?</b>"
msgstr "<b>拒絕所有程序 ptrace 或 debug 其它程序？</b>"

#: ../sepolicy/sepolicy/sepolicy.glade:4022
msgid ""
"File equivalence cause the system to label content under the new path as if "
"it were under the equivalence path."
msgstr "檔案相等會導致系統標誌新路徑下的內容，一如在相等路徑下一樣。"

#: ../sepolicy/sepolicy/sepolicy.glade:4078
msgid "Files Equivalence"
msgstr "檔案相等"

#: ../sepolicy/sepolicy/sepolicy.glade:4091
msgid "<b>...SELECT TO VIEW DATA...</b>"
msgstr "<b>...選擇以檢視資料...</b>"

#: ../sepolicy/sepolicy/sepolicy.glade:4122
msgid "Delete"
msgstr "刪除"

#: ../sepolicy/sepolicy/sepolicy.glade:4138
msgid "Modify"
msgstr "修改"

#: ../sepolicy/sepolicy/sepolicy.glade:4153
msgid "Add"
msgstr "新增"

#: ../sepolicy/sepolicy/sepolicy.glade:4199
msgid "Revert"
msgstr "復原"

#: ../sepolicy/sepolicy/sepolicy.glade:4204
msgid ""
"Revert button will launch a dialog window which allows you to revert changes "
"within the current transaction."
msgstr "按下復原按鈕會顯示對話視窗，允許使用者復原現有處理事項裡的變更。"

#: ../sepolicy/sepolicy/sepolicy.glade:4221
msgid "Commit all changes in your current transaction to the server."
msgstr "將現有處理事項中的所有變更提交至伺服器。"

#: ../sepolicy/sepolicy/sepolicy.glade:4269
msgid "Applications - Advanced Search"
msgstr "應用程式 - 進階搜尋"

#: ../sepolicy/sepolicy/sepolicy.glade:4334
msgid "Process Types"
msgstr "程序類型"

#: ../sepolicy/sepolicy/sepolicy.glade:4375
msgid "More Details"
msgstr "更多詳細資料"

#: ../sepolicy/sepolicy/sepolicy.glade:4411
#: ../sepolicy/sepolicy/sepolicy.glade:4705
msgid "Delete Modified File Labeling"
msgstr "刪除已修改的檔案標籤"

#: ../sepolicy/sepolicy/sepolicy.glade:4429
msgid ""
"Select file labeling to delete. File labeling will be deleted when update is "
"applied."
msgstr "選擇要刪除的檔案標籤。套用更新時會刪除檔案標籤。"

#: ../sepolicy/sepolicy/sepolicy.glade:4476
msgid "SELinux File Label"
msgstr "SELinux 檔案標籤"

#: ../sepolicy/sepolicy/sepolicy.glade:4515
#: ../sepolicy/sepolicy/sepolicy.glade:4665
#: ../sepolicy/sepolicy/sepolicy.glade:4796
#: ../sepolicy/sepolicy/sepolicy.glade:4930
#: ../sepolicy/sepolicy/sepolicy.glade:5279
msgid "Save to Update"
msgstr "儲存以更新"

#: ../sepolicy/sepolicy/sepolicy.glade:4555
msgid "Delete Modified Ports"
msgstr "刪除修改過的連接埠"

#: ../sepolicy/sepolicy/sepolicy.glade:4573
msgid "Select ports to delete. Ports will be deleted when update is applied."
msgstr "選擇要刪除的連接埠。套用更新時會刪除連接埠。"

#: ../sepolicy/sepolicy/sepolicy.glade:4723
msgid ""
"Select file equivalence labeling to delete. File equivalence labeling will "
"be deleted when update is applied."
msgstr "選擇欲刪除的檔案相等標籤。當更新套用之後，檔案相等標籤便會被刪除。"

#: ../sepolicy/sepolicy/sepolicy.glade:4839
#: ../sepolicy/sepolicy/sepolicy.glade:5188
msgid "Delete Modified Users Mapping."
msgstr "刪除已修改的使用者對應。"

#: ../sepolicy/sepolicy/sepolicy.glade:4857
msgid ""
"Select login user mapping to delete. Login user mapping will be deleted when "
"update is applied."
msgstr "選擇要刪除的登入使用者對映。套用更新時會刪除登入使用者對映。"

#: ../sepolicy/sepolicy/sepolicy.glade:4892
msgid "Login name"
msgstr "登入名稱"

#: ../sepolicy/sepolicy/sepolicy.glade:4973
msgid "More Types"
msgstr "更多類型"

#: ../sepolicy/sepolicy/sepolicy.glade:5000
msgid "Types"
msgstr "類型"

#: ../sepolicy/sepolicy/sepolicy.glade:5059
msgid ""
"Review the updates you have made before committing them to the system.  To "
"reset an item, uncheck the checkbox.  All items checked will be updated in "
"the system when you select update."
msgstr ""
"將更新發送至系統前，先予以檢視。要重新設定項目，先取消勾選。所有勾選的項目會"
"在您選擇更新時於系統內部更新。"

#: ../sepolicy/sepolicy/sepolicy.glade:5122
msgid "Action"
msgstr "動作"

#: ../sepolicy/sepolicy/sepolicy.glade:5148
msgid "Apply"
msgstr "套用"

#: ../sepolicy/sepolicy/sepolicy.glade:5206
msgid ""
"Select users mapping to delete.Users mapping will be deleted when update is "
"applied."
msgstr "選擇要刪除的使用者對映。套用更新時會刪除使用者對映。"

#: ../sepolicy/sepolicy/sepolicy.glade:5254
msgid "SELinux Username"
msgstr "SELinux 使用者名稱"

#: ../sepolicy/sepolicy/sepolicy.glade:5339
msgid ""
"Add User Roles. SELinux User Roles will be created when Update is applied."
msgstr "新增使用者角色。套用更新時會建立 SELinux 使用者角色。"

#: ../sepolicy/sepolicy/sepolicy.glade:5364
msgid "SELinux User Name"
msgstr "SELinux 使用者名稱"

#: ../sepolicy/sepolicy/sepolicy.glade:5479
msgid ""
"Enter MLS/MCS Range for this SELinux User.\n"
"s0-s0:c1023"
msgstr ""
"為此 SELinux 使用者輸入 MLS/MCS 範圍。\n"
"s0-s0:c1023"

#: ../sepolicy/sepolicy/sepolicy.glade:5510
msgid ""
"Specify the default level that you would like this SELinux user to login "
"with.  Defaults to s0."
msgstr "指定此 SELinux 使用者登入時所使用的預設等級。預設值為 s0。"

#: ../sepolicy/sepolicy/sepolicy.glade:5514
msgid "Enter Default Level for SELinux User to login with. Default s0"
msgstr "輸入欲登入的 SELinux 之預設等級。預設值為 s0。"

#~ msgid "Boolean name"
#~ msgstr "布林值名稱"

#~ msgid "file_spec"
#~ msgstr "file_spec"

#~ msgid "Protocol udp or tcp is required"
#~ msgstr "需要 udp 或 tcp 通訊協定"