use crate::{
    alphabet::Alphabet,
    engine::{
        general_purpose::{self, decode_table, encode_table},
        Config, DecodeEstimate, DecodeMetadata, DecodePaddingMode, Engine,
    },
    DecodeError, PAD_BYTE,
};
use std::ops::{BitAnd, BitOr, Shl, Shr};

/// Comparatively simple implementation that can be used as something to compare against in tests
pub struct Naive {
    encode_table: [u8; 64],
    decode_table: [u8; 256],
    config: NaiveConfig,
}

impl Naive {
    const ENCODE_INPUT_CHUNK_SIZE: usize = 3;
    const DECODE_INPUT_CHUNK_SIZE: usize = 4;

    pub const fn new(alphabet: &Alphabet, config: NaiveConfig) -> Self {
        Self {
            encode_table: encode_table(alphabet),
            decode_table: decode_table(alphabet),
            config,
        }
    }

    fn decode_byte_into_u32(&self, offset: usize, byte: u8) -> Result<u32, DecodeError> {
        let decoded = self.decode_table[byte as usize];

        if decoded == general_purpose::INVALID_VALUE {
            return Err(DecodeError::InvalidByte(offset, byte));
        }

        Ok(decoded as u32)
    }
}

impl Engine for Naive {
    type Config = NaiveConfig;
    type DecodeEstimate = NaiveEstimate;

    fn internal_encode(&self, input: &[u8], output: &mut [u8]) -> usize {
        // complete chunks first

        const LOW_SIX_BITS: u32 = 0x3F;

        let rem = input.len() % Self::ENCODE_INPUT_CHUNK_SIZE;
        // will never underflow
        let complete_chunk_len = input.len() - rem;

        let mut input_index = 0_usize;
        let mut output_index = 0_usize;
        if let Some(last_complete_chunk_index) =
            complete_chunk_len.checked_sub(Self::ENCODE_INPUT_CHUNK_SIZE)
        {
            while input_index <= last_complete_chunk_index {
                let chunk = &input[input_index..input_index + Self::ENCODE_INPUT_CHUNK_SIZE];

                // populate low 24 bits from 3 bytes
                let chunk_int: u32 =
                    (chunk[0] as u32).shl(16) | (chunk[1] as u32).shl(8) | (chunk[2] as u32);
                // encode 4x 6-bit output bytes
                output[output_index] = self.encode_table[chunk_int.shr(18) as usize];
                output[output_index + 1] =
                    self.encode_table[chunk_int.shr(12_u8).bitand(LOW_SIX_BITS) as usize];
                output[output_index + 2] =
                    self.encode_table[chunk_int.shr(6_u8).bitand(LOW_SIX_BITS) as usize];
                output[output_index + 3] =
                    self.encode_table[chunk_int.bitand(LOW_SIX_BITS) as usize];

                input_index += Self::ENCODE_INPUT_CHUNK_SIZE;
                output_index += 4;
            }
        }

        // then leftovers
        if rem == 2 {
            let chunk = &input[input_index..input_index + 2];

            // high six bits of chunk[0]
            output[output_index] = self.encode_table[chunk[0].shr(2) as usize];
            // bottom 2 bits of [0], high 4 bits of [1]
            output[output_index + 1] =
                self.encode_table[(chunk[0].shl(4_u8).bitor(chunk[1].shr(4_u8)) as u32)
                    .bitand(LOW_SIX_BITS) as usize];
            // bottom 4 bits of [1], with the 2 bottom bits as zero
            output[output_index + 2] =
                self.encode_table[(chunk[1].shl(2_u8) as u32).bitand(LOW_SIX_BITS) as usize];

            output_index += 3;
        } else if rem == 1 {
            let byte = input[input_index];
            output[output_index] = self.encode_table[byte.shr(2) as usize];
            output[output_index + 1] =
                self.encode_table[(byte.shl(4_u8) as u32).bitand(LOW_SIX_BITS) as usize];
            output_index += 2;
        }

        output_index
    }

    fn internal_decoded_len_estimate(&self, input_len: usize) -> Self::DecodeEstimate {
        NaiveEstimate::new(input_len)
    }

    fn internal_decode(
        &self,
        input: &[u8],
        output: &mut [u8],
        estimate: Self::DecodeEstimate,
    ) -> Result<DecodeMetadata, DecodeError> {
        if estimate.rem == 1 {
            // trailing whitespace is so common that it's worth it to check the last byte to
            // possibly return a better error message
            if let Some(b) = input.last() {
                if *b != PAD_BYTE
                    && self.decode_table[*b as usize] == general_purpose::INVALID_VALUE
                {
                    return Err(DecodeError::InvalidByte(input.len() - 1, *b));
                }
            }

            return Err(DecodeError::InvalidLength);
        }

        let mut input_index = 0_usize;
        let mut output_index = 0_usize;
        const BOTTOM_BYTE: u32 = 0xFF;

        // can only use the main loop on non-trailing chunks
        if input.len() > Self::DECODE_INPUT_CHUNK_SIZE {
            // skip the last chunk, whether it's partial or full, since it might
            // have padding, and start at the beginning of the chunk before that
            let last_complete_chunk_start_index = estimate.complete_chunk_len
                - if estimate.rem == 0 {
                    // Trailing chunk is also full chunk, so there must be at least 2 chunks, and
                    // this won't underflow
                    Self::DECODE_INPUT_CHUNK_SIZE * 2
                } else {
                    // Trailing chunk is partial, so it's already excluded in
                    // complete_chunk_len
                    Self::DECODE_INPUT_CHUNK_SIZE
                };

            while input_index <= last_complete_chunk_start_index {
                let chunk = &input[input_index..input_index + Self::DECODE_INPUT_CHUNK_SIZE];
                let decoded_int: u32 = self.decode_byte_into_u32(input_index, chunk[0])?.shl(18)
                    | self
                        .decode_byte_into_u32(input_index + 1, chunk[1])?
                        .shl(12)
                    | self.decode_byte_into_u32(input_index + 2, chunk[2])?.shl(6)
                    | self.decode_byte_into_u32(input_index + 3, chunk[3])?;

                output[output_index] = decoded_int.shr(16_u8).bitand(BOTTOM_BYTE) as u8;
                output[output_index + 1] = decoded_int.shr(8_u8).bitand(BOTTOM_BYTE) as u8;
                output[output_index + 2] = decoded_int.bitand(BOTTOM_BYTE) as u8;

                input_index += Self::DECODE_INPUT_CHUNK_SIZE;
                output_index += 3;
            }
        }

        general_purpose::decode_suffix::decode_suffix(
            input,
            input_index,
            output,
            output_index,
            &self.decode_table,
            self.config.decode_allow_trailing_bits,
            self.config.decode_padding_mode,
        )
    }

    fn config(&self) -> &Self::Config {
        &self.config
    }
}

pub struct NaiveEstimate {
    /// remainder from dividing input by `Naive::DECODE_CHUNK_SIZE`
    rem: usize,
    /// Length of input that is in complete `Naive::DECODE_CHUNK_SIZE`-length chunks
    complete_chunk_len: usize,
}

impl NaiveEstimate {
    fn new(input_len: usize) -> Self {
        let rem = input_len % Naive::DECODE_INPUT_CHUNK_SIZE;
        let complete_chunk_len = input_len - rem;

        Self {
            rem,
            complete_chunk_len,
        }
    }
}

impl DecodeEstimate for NaiveEstimate {
    fn decoded_len_estimate(&self) -> usize {
        ((self.complete_chunk_len / 4) + ((self.rem > 0) as usize)) * 3
    }
}

#[derive(Clone, Copy, Debug)]
pub struct NaiveConfig {
    pub encode_padding: bool,
    pub decode_allow_trailing_bits: bool,
    pub decode_padding_mode: DecodePaddingMode,
}

impl Config for NaiveConfig {
    fn encode_padding(&self) -> bool {
        self.encode_padding
    }
}