==========================
UndefinedBehaviorSanitizer
==========================

.. contents::
   :local:

Introduction
============

UndefinedBehaviorSanitizer (UBSan) is a fast undefined behavior detector.
UBSan modifies the program at compile-time to catch various kinds of undefined
behavior during program execution, for example:

* Array subscript out of bounds, where the bounds can be statically determined
* Bitwise shifts that are out of bounds for their data type
* Dereferencing misaligned or null pointers
* Signed integer overflow
* Conversion to, from, or between floating-point types which would
  overflow the destination

See the full list of available :ref:`checks <ubsan-checks>` below.

UBSan has an optional run-time library which provides better error reporting.
The checks have small runtime cost and no impact on address space layout or ABI.

How to build
============

Build LLVM/Clang with `CMake <https://llvm.org/docs/CMake.html>`_.

Usage
=====

Use ``clang++`` to compile and link your program with the ``-fsanitize=undefined``
option. Make sure to use ``clang++`` (not ``ld``) as a linker, so that your
executable is linked with proper UBSan runtime libraries, unless all enabled
checks use trap mode. You can use ``clang`` instead of ``clang++`` if you're
compiling/linking C code.

.. code-block:: console

  % cat test.cc
  int main(int argc, char **argv) {
    int k = 0x7fffffff;
    k += argc;
    return 0;
  }
  % clang++ -fsanitize=undefined test.cc
  % ./a.out
  test.cc:3:5: runtime error: signed integer overflow: 2147483647 + 1 cannot be represented in type 'int'

You can use ``-fsanitize=...`` and ``-fno-sanitize=`` to enable and disable one
check or one check group. For an individual check, the last option that enabling
or disabling it wins.

.. code-block:: console

  # Enable all checks in the "undefined" group, but disable "alignment".
  % clang -fsanitize=undefined -fno-sanitize=alignment a.c

  # Enable just "alignment".
  % clang -fsanitize=alignment a.c

  # The same. -fno-sanitize=undefined nullifies the previous -fsanitize=undefined.
  % clang -fsanitize=undefined -fno-sanitize=undefined -fsanitize=alignment a.c

For most checks (:ref:`checks <ubsan-checks>`), the instrumented program prints
a verbose error report and continues execution upon a failed check.
You can use the following options to change the error reporting behavior:

* ``-fno-sanitize-recover=...``: print a verbose error report and exit the program;
* ``-fsanitize-trap=...``: execute a trap instruction (doesn't require UBSan
  run-time support). If the signal is not caught, the program will typically
  terminate due to a ``SIGILL`` or ``SIGTRAP`` signal.

For example:

.. code-block:: console

  % clang++ -fsanitize=signed-integer-overflow,null,alignment -fno-sanitize-recover=null -fsanitize-trap=alignment a.cc

The program will continue execution after signed integer overflows, exit after
the first invalid use of a null pointer, and trap after the first use of misaligned
pointer.

.. code-block:: console

  % clang++ -fsanitize=undefined -fsanitize-trap=all a.cc

All checks in the "undefined" group are put into trap mode. Since no check
needs run-time support, the UBSan run-time library it not linked. Note that
some other sanitizers also support trap mode and ``-fsanitize-trap=all``
enables trap mode for them.

.. code-block:: console

  % clang -fsanitize-trap=undefined -fsanitize-recover=all a.c

``-fsanitize-trap=`` and ``-fsanitize-recover=`` are a no-op in the absence of
a ``-fsanitize=`` option. There is no unused command line option warning.

.. _ubsan-checks:

Available checks
================

Available checks are:

  -  ``-fsanitize=alignment``: Use of a misaligned pointer or creation
     of a misaligned reference. Also sanitizes assume_aligned-like attributes.
  -  ``-fsanitize=bool``: Load of a ``bool`` value which is neither
     ``true`` nor ``false``.
  -  ``-fsanitize=builtin``: Passing invalid values to compiler builtins.
  -  ``-fsanitize=bounds``: Out of bounds array indexing, in cases
     where the array bound can be statically determined. The check includes
     ``-fsanitize=array-bounds`` and ``-fsanitize=local-bounds``. Note that
     ``-fsanitize=local-bounds`` is not included in ``-fsanitize=undefined``.
  -  ``-fsanitize=enum``: Load of a value of an enumerated type which
     is not in the range of representable values for that enumerated
     type.
  -  ``-fsanitize=float-cast-overflow``: Conversion to, from, or
     between floating-point types which would overflow the
     destination. Because the range of representable values for all
     floating-point types supported by Clang is [-inf, +inf], the only
     cases detected are conversions from floating point to integer types.
  -  ``-fsanitize=float-divide-by-zero``: Floating point division by
     zero. This is undefined per the C and C++ standards, but is defined
     by Clang (and by ISO/IEC/IEEE 60559 / IEEE 754) as producing either an
     infinity or NaN value, so is not included in ``-fsanitize=undefined``.
  -  ``-fsanitize=function``: Indirect call of a function through a
     function pointer of the wrong type.
  -  ``-fsanitize=implicit-unsigned-integer-truncation``,
     ``-fsanitize=implicit-signed-integer-truncation``: Implicit conversion from
     integer of larger bit width to smaller bit width, if that results in data
     loss. That is, if the demoted value, after casting back to the original
     width, is not equal to the original value before the downcast.
     The ``-fsanitize=implicit-unsigned-integer-truncation`` handles conversions
     between two ``unsigned`` types, while
     ``-fsanitize=implicit-signed-integer-truncation`` handles the rest of the
     conversions - when either one, or both of the types are signed.
     Issues caught by these sanitizers are not undefined behavior,
     but are often unintentional.
  -  ``-fsanitize=implicit-integer-sign-change``: Implicit conversion between
     integer types, if that changes the sign of the value. That is, if the
     original value was negative and the new value is positive (or zero),
     or the original value was positive, and the new value is negative.
     Issues caught by this sanitizer are not undefined behavior,
     but are often unintentional.
  -  ``-fsanitize=integer-divide-by-zero``: Integer division by zero.
  -  ``-fsanitize=implicit-bitfield-conversion``: Implicit conversion from
     integer of larger bit width to smaller bitfield, if that results in data
     loss. This includes unsigned/signed truncations and sign changes, similarly
     to how the ``-fsanitize=implicit-integer-conversion`` group works, but
     explicitly for bitfields.
  -  ``-fsanitize=nonnull-attribute``: Passing null pointer as a function
     parameter which is declared to never be null.
  -  ``-fsanitize=null``: Use of a null pointer or creation of a null
     reference.
  -  ``-fsanitize=nullability-arg``: Passing null as a function parameter
     which is annotated with ``_Nonnull``.
  -  ``-fsanitize=nullability-assign``: Assigning null to an lvalue which
     is annotated with ``_Nonnull``.
  -  ``-fsanitize=nullability-return``: Returning null from a function with
     a return type annotated with ``_Nonnull``.
  -  ``-fsanitize=objc-cast``: Invalid implicit cast of an ObjC object pointer
     to an incompatible type. This is often unintentional, but is not undefined
     behavior, therefore the check is not a part of the ``undefined`` group.
     Currently only supported on Darwin.
  -  ``-fsanitize=object-size``: An attempt to potentially use bytes which
     the optimizer can determine are not part of the object being accessed.
     This will also detect some types of undefined behavior that may not
     directly access memory, but are provably incorrect given the size of
     the objects involved, such as invalid downcasts and calling methods on
     invalid pointers. These checks are made in terms of
     ``__builtin_object_size``, and consequently may be able to detect more
     problems at higher optimization levels.
  -  ``-fsanitize=pointer-overflow``: Performing pointer arithmetic which
     overflows, or where either the old or new pointer value is a null pointer
     (excluding the case where both are null pointers).
  -  ``-fsanitize=return``: In C++, reaching the end of a
     value-returning function without returning a value.
  -  ``-fsanitize=returns-nonnull-attribute``: Returning null pointer
     from a function which is declared to never return null.
  -  ``-fsanitize=shift``: Shift operators where the amount shifted is
     greater or equal to the promoted bit-width of the left hand side
     or less than zero, or where the left hand side is negative. For a
     signed left shift, also checks for signed overflow in C, and for
     unsigned overflow in C++. You can use ``-fsanitize=shift-base`` or
     ``-fsanitize=shift-exponent`` to check only left-hand side or
     right-hand side of shift operation, respectively.
  -  ``-fsanitize=unsigned-shift-base``: check that an unsigned left-hand side of
     a left shift operation doesn't overflow. Issues caught by this sanitizer are
     not undefined behavior, but are often unintentional.
  -  ``-fsanitize=signed-integer-overflow``: Signed integer overflow, where the
     result of a signed integer computation cannot be represented in its type.
     This includes all the checks covered by ``-ftrapv``, as well as checks for
     signed division overflow (``INT_MIN/-1``). Note that checks are still
     added even when ``-fwrapv`` is enabled. This sanitizer does not check for
     lossy implicit conversions performed before the computation (see
     ``-fsanitize=implicit-integer-conversion``). Both of these two issues are handled
     by ``-fsanitize=implicit-integer-conversion`` group of checks.
  -  ``-fsanitize=unreachable``: If control flow reaches an unreachable
     program point.
  -  ``-fsanitize=unsigned-integer-overflow``: Unsigned integer overflow, where
     the result of an unsigned integer computation cannot be represented in its
     type. Unlike signed integer overflow, this is not undefined behavior, but
     it is often unintentional. This sanitizer does not check for lossy implicit
     conversions performed before such a computation
     (see ``-fsanitize=implicit-integer-conversion``).
  -  ``-fsanitize=vla-bound``: A variable-length array whose bound
     does not evaluate to a positive value.
  -  ``-fsanitize=vptr``: Use of an object whose vptr indicates that it is of
     the wrong dynamic type, or that its lifetime has not begun or has ended.
     Incompatible with ``-fno-rtti``. Link must be performed by ``clang++``, not
     ``clang``, to make sure C++-specific parts of the runtime library and C++
     standard libraries are present. The check is not a part of the ``undefined``
     group. Also it does not support ``-fsanitize-trap=vptr``.

You can also use the following check groups:
  -  ``-fsanitize=undefined``: All of the checks listed above other than
     ``float-divide-by-zero``, ``unsigned-integer-overflow``,
     ``implicit-conversion``, ``local-bounds``, ``vptr`` and the
     ``nullability-*`` group of checks.
  -  ``-fsanitize=undefined-trap``: Deprecated alias of
     ``-fsanitize=undefined``.
  -  ``-fsanitize=implicit-integer-truncation``: Catches lossy integral
     conversions. Enables ``implicit-signed-integer-truncation`` and
     ``implicit-unsigned-integer-truncation``.
  -  ``-fsanitize=implicit-integer-arithmetic-value-change``: Catches implicit
     conversions that change the arithmetic value of the integer. Enables
     ``implicit-signed-integer-truncation`` and ``implicit-integer-sign-change``.
  -  ``-fsanitize=implicit-integer-conversion``: Checks for suspicious
     behavior of implicit integer conversions. Enables
     ``implicit-unsigned-integer-truncation``,
     ``implicit-signed-integer-truncation``, and
     ``implicit-integer-sign-change``.
  -  ``-fsanitize=implicit-conversion``: Checks for suspicious
     behavior of implicit conversions. Enables
     ``implicit-integer-conversion``, and
     ``implicit-bitfield-conversion``.
  -  ``-fsanitize=integer``: Checks for undefined or suspicious integer
     behavior (e.g. unsigned integer overflow).
     Enables ``signed-integer-overflow``, ``unsigned-integer-overflow``,
     ``shift``, ``integer-divide-by-zero``,
     ``implicit-unsigned-integer-truncation``,
     ``implicit-signed-integer-truncation``, and
     ``implicit-integer-sign-change``.
  -  ``-fsanitize=nullability``: Enables ``nullability-arg``,
     ``nullability-assign``, and ``nullability-return``. While violating
     nullability does not have undefined behavior, it is often unintentional,
     so UBSan offers to catch it.

Volatile
--------

The ``null``, ``alignment``, ``object-size``, ``local-bounds``, and ``vptr`` checks do not apply
to pointers to types with the ``volatile`` qualifier.

.. _minimal-runtime:

Minimal Runtime
===============

There is a minimal UBSan runtime available suitable for use in production
environments. This runtime has a small attack surface. It only provides very
basic issue logging and deduplication, and does not support ``-fsanitize=vptr``
checking.

To use the minimal runtime, add ``-fsanitize-minimal-runtime`` to the clang
command line options. For example, if you're used to compiling with
``-fsanitize=undefined``, you could enable the minimal runtime with
``-fsanitize=undefined -fsanitize-minimal-runtime``.

Stack traces and report symbolization
=====================================
If you want UBSan to print symbolized stack trace for each error report, you
will need to:

#. Compile with ``-g``, ``-fno-sanitize-merge`` and ``-fno-omit-frame-pointer``
   to get proper debug information in your binary.
#. Run your program with environment variable
   ``UBSAN_OPTIONS=print_stacktrace=1``.
#. Make sure ``llvm-symbolizer`` binary is in ``PATH``.

Logging
=======

The default log file for diagnostics is "stderr". To log diagnostics to another
file, you can set ``UBSAN_OPTIONS=log_path=...``.

Silencing Unsigned Integer Overflow
===================================
To silence reports from unsigned integer overflow, you can set
``UBSAN_OPTIONS=silence_unsigned_overflow=1``.  This feature, combined with
``-fsanitize-recover=unsigned-integer-overflow``, is particularly useful for
providing fuzzing signal without blowing up logs.

Disabling instrumentation for common overflow patterns
------------------------------------------------------

There are certain overflow-dependent or overflow-prone code patterns which
produce a lot of noise for integer overflow/truncation sanitizers. Negated
unsigned constants, post-decrements in a while loop condition and simple
overflow checks are accepted and pervasive code patterns. However, the signal
received from sanitizers instrumenting these code patterns may be too noisy for
some projects. To disable instrumentation for these common patterns one should
use ``-fsanitize-undefined-ignore-overflow-pattern=``.

Currently, this option supports three overflow-dependent code idioms:

``negated-unsigned-const``

.. code-block:: c++

    /// -fsanitize-undefined-ignore-overflow-pattern=negated-unsigned-const
    unsigned long foo = -1UL; // No longer causes a negation overflow warning
    unsigned long bar = -2UL; // and so on...

``unsigned-post-decr-while``

.. code-block:: c++

    /// -fsanitize-undefined-ignore-overflow-pattern=unsigned-post-decr-while
    unsigned char count = 16;
    while (count--) { /* ... */ } // No longer causes unsigned-integer-overflow sanitizer to trip

``add-signed-overflow-test,add-unsigned-overflow-test``

.. code-block:: c++

    /// -fsanitize-undefined-ignore-overflow-pattern=add-(signed|unsigned)-overflow-test
    if (base + offset < base) { /* ... */ } // The pattern of `a + b < a`, and other re-orderings,
                                            // won't be instrumented (signed or unsigned types)

.. list-table:: Overflow Pattern Types
   :widths: 30 50
   :header-rows: 1

   * - Pattern
     - Sanitizer
   * - negated-unsigned-const
     - unsigned-integer-overflow
   * - unsigned-post-decr-while
     - unsigned-integer-overflow
   * - add-unsigned-overflow-test
     - unsigned-integer-overflow
   * - add-signed-overflow-test
     - signed-integer-overflow


Note: ``add-signed-overflow-test`` suppresses only the check for Undefined
Behavior. Eager Undefined Behavior optimizations are still possible. One may
remedy this with ``-fwrapv`` or ``-fno-strict-overflow``.

You can enable all exclusions with
``-fsanitize-undefined-ignore-overflow-pattern=all`` or disable all exclusions
with ``-fsanitize-undefined-ignore-overflow-pattern=none``. If
``-fsanitize-undefined-ignore-overflow-pattern`` is not specified ``none`` is
implied. Specifying ``none`` alongside other values also implies ``none`` as
``none`` has precedence over other values -- including ``all``.

Issue Suppression
=================

UndefinedBehaviorSanitizer is not expected to produce false positives.
If you see one, look again; most likely it is a true positive!

Disabling Instrumentation with ``__attribute__((no_sanitize("undefined")))``
----------------------------------------------------------------------------

You disable UBSan checks for particular functions with
``__attribute__((no_sanitize("undefined")))``. You can use all values of
``-fsanitize=`` flag in this attribute, e.g. if your function deliberately
contains possible signed integer overflow, you can use
``__attribute__((no_sanitize("signed-integer-overflow")))``.

This attribute may not be
supported by other compilers, so consider using it together with
``#if defined(__clang__)``.

Suppressing Errors in Recompiled Code (Ignorelist)
--------------------------------------------------

UndefinedBehaviorSanitizer supports ``src`` and ``fun`` entity types in
:doc:`SanitizerSpecialCaseList`, that can be used to suppress error reports
in the specified source files or functions.

Runtime suppressions
--------------------

Sometimes you can suppress UBSan error reports for specific files, functions,
or libraries without recompiling the code. You need to pass a path to
suppression file in a ``UBSAN_OPTIONS`` environment variable.

.. code-block:: bash

    UBSAN_OPTIONS=suppressions=MyUBSan.supp

You need to specify a :ref:`check <ubsan-checks>` you are suppressing and the
bug location. For example:

.. code-block:: bash

  signed-integer-overflow:file-with-known-overflow.cpp
  alignment:function_doing_unaligned_access
  vptr:shared_object_with_vptr_failures.so

There are several limitations:

* Sometimes your binary must have enough debug info and/or symbol table, so
  that the runtime could figure out source file or function name to match
  against the suppression.
* It is only possible to suppress recoverable checks. For the example above,
  you can additionally pass
  ``-fsanitize-recover=signed-integer-overflow,alignment,vptr``, although
  most of UBSan checks are recoverable by default.
* Check groups (like ``undefined``) can't be used in suppressions file, only
  fine-grained checks are supported.

Security Considerations
=======================

UndefinedBehaviorSanitizer's runtime is meant for testing purposes and its usage
in production environment should be carefully considered from security
perspective as it may compromise the security of the resulting executable.
For security-sensitive applications consider using :ref:`Minimal Runtime
<minimal-runtime>` or trap mode for all checks.

Supported Platforms
===================

UndefinedBehaviorSanitizer is supported on the following operating systems:

* Android
* Linux
* NetBSD
* FreeBSD
* OpenBSD
* macOS
* Windows

The runtime library is relatively portable and platform independent. If the OS
you need is not listed above, UndefinedBehaviorSanitizer may already work for
it, or could be made to work with a minor porting effort.

Current Status
==============

UndefinedBehaviorSanitizer is available on selected platforms starting from LLVM
3.3. The test suite is integrated into the CMake build and can be run with
``check-ubsan`` command.

Additional Configuration
========================

UndefinedBehaviorSanitizer adds static check data for each check unless it is
in trap mode. This check data includes the full file name. The option
``-fsanitize-undefined-strip-path-components=N`` can be used to trim this
information. If ``N`` is positive, file information emitted by
UndefinedBehaviorSanitizer will drop the first ``N`` components from the file
path. If ``N`` is negative, the last ``N`` components will be kept.

Example
-------

For a file called ``/code/library/file.cpp``, here is what would be emitted:

* Default (No flag, or ``-fsanitize-undefined-strip-path-components=0``): ``/code/library/file.cpp``
* ``-fsanitize-undefined-strip-path-components=1``: ``code/library/file.cpp``
* ``-fsanitize-undefined-strip-path-components=2``: ``library/file.cpp``
* ``-fsanitize-undefined-strip-path-components=-1``: ``file.cpp``
* ``-fsanitize-undefined-strip-path-components=-2``: ``library/file.cpp``

More Information
================

* From Oracle blog, including a discussion of error messages:
  `Improving Application Security with UndefinedBehaviorSanitizer (UBSan) and GCC
  <https://blogs.oracle.com/linux/improving-application-security-with-undefinedbehaviorsanitizer-ubsan-and-gcc>`_
* From LLVM project blog:
  `What Every C Programmer Should Know About Undefined Behavior
  <http://blog.llvm.org/2011/05/what-every-c-programmer-should-know.html>`_
* From John Regehr's *Embedded in Academia* blog:
  `A Guide to Undefined Behavior in C and C++
  <https://blog.regehr.org/archives/213>`_