This is the RISC-V C and C++ cross-compiler. It supports two build modes: a generic ELF/Newlib toolchain and a more sophisticated Linux-ELF/glibc toolchain.
This repository uses submodules, but submodules will fetch automatically on demand, so --recursive or git submodule update --init --recursive is not needed.
$ git clone https://github.com/riscv/riscv-gnu-toolchain
Warning: git clone takes around 6.65 GB of disk and download size
Several standard packages are needed to build the toolchain.
On Ubuntu, executing the following command should suffice:
$ sudo apt-get install autoconf automake autotools-dev curl python3 python3-pip libmpc-dev libmpfr-dev libgmp-dev gawk build-essential bison flex texinfo gperf libtool patchutils bc zlib1g-dev libexpat-dev ninja-build git cmake libglib2.0-dev libslirp-dev
On Fedora/CentOS/RHEL OS, executing the following command should suffice:
$ sudo yum install autoconf automake python3 libmpc-devel mpfr-devel gmp-devel gawk bison flex texinfo patchutils gcc gcc-c++ zlib-devel expat-devel libslirp-devel
On Arch Linux, executing the following command should suffice:
$ sudo pacman -Syyu autoconf automake curl python3 libmpc mpfr gmp gawk base-devel bison flex texinfo gperf libtool patchutils bc zlib expat libslirp
Also available for Arch users on the AUR: https://aur.archlinux.org/packages/riscv-gnu-toolchain-bin
On OS X, you can use Homebrew to install the dependencies:
$ brew install python3 gawk gnu-sed gmp mpfr libmpc isl zlib expat texinfo flock libslirp
To build the glibc (Linux) on OS X, you will need to build within a case-sensitive file system. The simplest approach is to create and mount a new disk image with a case sensitive format. Make sure that the mount point does not contain spaces. This is not necessary to build newlib or gcc itself on OS X.
This process will start by downloading about 200 MiB of upstream sources, then will patch, build, and install the toolchain. If a local cache of the upstream sources exists in $(DISTDIR), it will be used; the default location is /var/cache/distfiles. Your computer will need about 8 GiB of disk space to complete the process.
To build the Newlib cross-compiler, pick an install path (that is writeable). If you choose, say, /opt/riscv, then add /opt/riscv/bin to your PATH. Then, simply run the following command:
./configure --prefix=/opt/riscv make
You should now be able to use riscv64-unknown-elf-gcc and its cousins.
Note: If you're planning to use an external library that replaces part of newlib (for example libgloss-htif), read the FAQ.
To build the Linux cross-compiler, pick an install path (that is writeable). If you choose, say, /opt/riscv, then add /opt/riscv/bin to your PATH. Then, simply run the following command:
./configure --prefix=/opt/riscv make linux
The build defaults to targeting RV64GC (64-bit) with glibc, even on a 32-bit build environment. To build the 32-bit RV32GC toolchain, use:
./configure --prefix=/opt/riscv --with-arch=rv32gc --with-abi=ilp32d make linux
In case you prefer musl libc over glibc, configure just like above and opt for make musl instead of make linux.
Supported architectures are rv32i or rv64i plus standard extensions (a)tomics, (m)ultiplication and division, (f)loat, (d)ouble, or (g)eneral for MAFD.
Supported ABIs are ilp32 (32-bit soft-float), ilp32d (32-bit hard-float), ilp32f (32-bit with single-precision in registers and double in memory, niche use only), lp64 lp64f lp64d (same but with 64-bit long and pointers).
To build either cross-compiler with support for both 32-bit and 64-bit, run the following command:
./configure --prefix=/opt/riscv --enable-multilib
And then either make, make linux or make musl for the Newlib, Linux glibc-based or Linux musl libc-based cross-compiler, respectively.
The multilib compiler will have the prefix riscv64-unknown-elf- or riscv64-unknown-linux-gnu- but will be able to target both 32-bit and 64-bit systems. It will support the most common -march/-mabi options, which can be seen by using the --print-multi-lib flag on either cross-compiler.
The musl compiler (riscv64-unknown-linux-musl-) will only be able to target 64-bit systems due to limitations in the upstream musl architecture support. The --enable-multilib flag therefore does not actually enable multilib support for musl libc.
Builds work best if installing into an empty directory. If you build a hard-float toolchain and then try to build a soft-float toolchain with the same --prefix directory, then the build scripts may get confused and exit with a linker error complaining that hard float code can't be linked with soft float code. Removing the existing toolchain first, or using a different prefix for the second build, avoids the problem. It is OK to build one newlib and one linux toolchain with the same prefix. But you should avoid building two newlib or two linux toolchains with the same prefix.
If building a linux toolchain on a MacOS system, or on a Windows system using the Linux subsystem or cygwin, you must ensure that the filesystem is case-sensitive. A build on a case-insensitive filesystem will fail when building glibc because *.os and *.oS files will clobber each other during the build eventually resulting in confusing link errors.
Centos (and RHEL) provide old GNU tools versions that may be too old to build a RISC-V toolchain. There is an alternate toolset provided that includes current versions of the GNU tools. This is the devtoolset provided as part of the Software Collection service. For more info, see the devtoolset-7 URL. There are various versions of the devtoolset that are available, so you can also try other versions of it, but we have at least one report that devtoolset-7 works.
There are a number of additional options that may be passed to configure. See ‘./configure --help’ for more details.
Also you can define extra flags to pass to specific projects: BINUTILS_NATIVE_FLAGS_EXTRA, BINUTILS_TARGET_FLAGS_EXTRA, GCC_EXTRA_CONFIGURE_FLAGS, GDB_NATIVE_FLAGS_EXTRA, GDB_TARGET_FLAGS_EXTRA, GLIBC_NATIVE_FLAGS_EXTRA, GLIBC_TARGET_FLAGS_EXTRA. Example: GCC_EXTRA_CONFIGURE_FLAGS=--with-gmp=/opt/gmp make linux
--with-isa-spec= can specify the default version of the RISC-V Unprivileged (formerly User-Level) ISA specification.
Possible options are: 2.2, 20190608 and 20191213.
The default version is 20191213.
More details about this option you can refer this post RISC-V GNU toolchain bumping default ISA spec to 20191213.
--with-multilib-generator= can specify what multilibs to build. The argument is a semicolon separated list of values, possibly consisting of a single value. Currently only supported for riscv*--elf. The accepted values and meanings are given below.
Every config is constructed with four components: architecture string, ABI, reuse rule with architecture string and reuse rule with sub-extension.
Re-use part support expansion operator (*) to simplify the combination of different sub-extensions, example 4 demonstrate how it uses and works.
Example 1: Add multi-lib support for rv32i with ilp32.
./configure --with-multilib-generator="rv32i-ilp32--"
Example 2: Add multi-lib support for rv32i with ilp32 and rv32imafd with ilp32.
./configure --with-multilib-generator="rv32i-ilp32--;rv32imafd-ilp32--"
Example 3: Add multi-lib support for rv32i with ilp32; rv32im with ilp32 and rv32ic with ilp32 will reuse this multi-lib set.
./configure --with-multilib-generator="rv32i-ilp32-rv32im-c"
Example 4: Add multi-lib support for rv64ima with lp64; rv64imaf with lp64, rv64imac with lp64 and rv64imafc with lp64 will reuse this multi-lib set.
./configure --with-multilib-generator="rv64ima-lp64--f*c"
The Dejagnu test suite has been ported to RISC-V. This can be run with a simulator for the elf and linux toolchains. The simulator can be selected by the SIM variable in the Makefile, e.g. SIM=qemu, SIM=gdb, or SIM=spike (experimental).In addition, the simulator can also be selected with the configure time option --with-sim=.However, the testsuite allowlist is only mintained for qemu.Other simulators might get extra failures.
A helper script to setup testing environment requires pyelftools.
On newer versions of Ubuntu, executing the following command should suffice:
$ sudo apt-get install python3-pyelftools
On newer versions of Fedora and CentOS/RHEL OS (9 or later), executing the following command should suffice:
$ sudo yum install python3-pyelftools
On Arch Linux, executing the following command should suffice:
$ sudo pacman -Syyu python-pyelftools
If your distribution/OS does not have pyelftools package, you can install it using PIP.
# Assuming that PIP is installed $ pip3 install --user pyelftools
To test GCC, run the following commands:
./configure --prefix=$RISCV --disable-linux --with-arch=rv64ima # or --with-arch=rv32ima make newlib make report-newlib SIM=gdb # Run with gdb simulator ./configure --prefix=$RISCV make linux make report-linux SIM=qemu # Run with qemu ./configure --prefix=$RISCV --with-sim=spike make linux make report # Run with spike
Note:
By default GCC will execute all tests of its regression test suite. While running them in parallel (e.g. make -j$(nproc) report) will significanlty speed up the execution time on multi-processor systems, the required time for executing all tests is usually too high for typical development cycles. Therefore GCC allows to select the tests that are being executed using the environment variable RUNTESTFLAGS.
To restrict a test run to only RISC-V specific tests the following command can be used:
RUNTESTFLAGS=“riscv.exp” make report
To restrict a test run to only RISC-V specific tests with match the pattern “zb*.c” and “sm*.c” the following command can be used:
RUNTESTFLAGS=“riscv.exp=zb*.c\ sm*.c” make report
The default Makefile target to run toolchain tests is report. This will run all tests of the GCC regression test suite. Alternatively, the following command can be used to do the same:
make check-gcc
The following command can be used to run the Binutils tests:
make check-binutils
The command below can be used to run the glibc tests:
make check-glibc-linux
--with-extra-multilib-test can be used when you want to test more combination of arch/ABI, for example: built a linux toolchain with multilib with rv64gc/lp64d and rv64imac/lp64, but you want to test more configuration like rv64gcv/lp64d or rv64gcv_zba/lp64d, then you can use --with-extra-multilib-test to specify that via --with-extra-multilib-test="rv64gcv-lp64d;rv64gcv_zba-lp64d", then the testing will run for rv64gc/lp64d, rv64imac/lp64, rv64gcv/lp64d and rv64gcv_zba/lp64d.
--with-extra-multilib-test support bare-metal and linux toolchain and support even multilib is disable, but the user must ensure extra multilib test configuration can be work with existing lib/multilib, e.g. rv32gcv/ilp32 test can‘t work if multilib didn’t have any rv32 multilib.
--with-extra-multilib-test also support more complicated format to fit the requirements of end-users. First of all, the argument is a list of test configurations. Each test configuration are separated by ;. For example:
rv64gcv-lp64d;rv64_zvl256b_zvfh-lp64d
For each test configuration, it has two parts, aka required arch-abi part and optional build flags. We leverage : to separate them with some restrictions.
: to separate them. For example:rv64gcv-lp64d:--param=riscv-autovec-lmul=dynamic:--param=riscv-autovec-preference=fixed-vlmax
will be consider as one target board same as below:
riscv-sim/-march=rv64gcv/-mabi=lp64d/-mcmodel=medlow/--param=riscv-autovec-lmul=dynamic/--param=riscv-autovec-preference=fixed-vlmax
rv64gcv-lp64d:--param=riscv-autovec-lmul=dynamic,--param=riscv-autovec-preference=fixed-vlmax
will be consider as two target boards same as below:
riscv-sim/-march=rv64gcv/-mabi=lp64d/-mcmodel=medlow/--param=riscv-autovec-preference=fixed-vlmax riscv-sim/-march=rv64gcv/-mabi=lp64d/-mcmodel=medlow/--param=riscv-autovec-lmul=dynamic
:), OR(,) operator together but the OR(,) will always have the higher priority. For example:rv64gcv-lp64d:--param=riscv-autovec-lmul=dynamic:--param=riscv-autovec-preference=fixed-vlmax,--param=riscv-autovec-lmul=m2
will be consider as tow target boars same as below:
riscv-sim/-march=rv64gcv/-mabi=lp64d/-mcmodel=medlow/--param=riscv-autovec-lmul=dynamic/--param=riscv-autovec-preference=fixed-vlmax riscv-sim/-march=rv64gcv/-mabi=lp64d/-mcmodel=medlow/--param=riscv-autovec-lmul=m2
LLVM can be used in combination with the RISC-V GNU Compiler Toolchain to build RISC-V applications. To build LLVM with C and C++ support the configure flag --enable-llvm can be used.
E.g. to build LLVM on top of a RV64 Linux toolchain the following commands can be used:
./configure --prefix=$RISCV --enable-llvm --enable-linux make
Note, that a combination of --enable-llvm and multilib configuration flags is not supported.
Below are examples how to build a rv64gc Linux/newlib toolchain with LLVM support, how to use it to build a C and a C++ application using clang, and how to execute the generated binaries using QEMU.
Build Linux toolchain and run examples:
# Build rv64gc toolchain with LLVM ./configure --prefix=$RISCV --enable-llvm --enable-linux --with-arch=rv64gc --with-abi=lp64d make -j$(nproc) all build-sim SIM=qemu # Build C application with clang $RISCV/bin/clang -march=rv64imafdc -o hello_world hello_world.c $RISCV/bin/qemu-riscv64 -L $RISCV/sysroot ./hello_world # Build C++ application with clang $RISCV/bin/clang++ -march=rv64imafdc -stdlib=libc++ -o hello_world_cpp hello_world_cpp.cxx $RISCV/bin/qemu-riscv64 -L $RISCV/sysroot ./hello_world_cpp
Build newlib toolchain and run examples (don't work with --with-multilib-generator=):
# Build rv64gc bare-metal toolchain with LLVM ./configure --prefix=$RISCV --enable-llvm --disable-linux --with-arch=rv64gc --with-abi=lp64d make -j$(nproc) all build-sim SIM=qemu # Build C application with clang $RISCV/bin/clang -march=rv64imafdc -o hello_world hello_world.c $RISCV/bin/qemu-riscv64 -L $RISCV/sysroot ./hello_world # Build C++ application with clang using static link $RISCV/bin/clang++ -march=rv64imafdc -static -o hello_world_cpp hello_world_cpp.cxx $RISCV/bin/qemu-riscv64 -L $RISCV/sysroot ./hello_world_cpp
This section is only for developer or advanced user, or you want to build toolchain with your own source tree.
riscv-gnu-toolchain contain stable but not latest source for each submodule, in case you want to using latest develoment tree, you can use following command to upgrade all submodule.
git submodule update --remote
Or you can upgrade specific submodule only.
git submodule update --remote <component>
For example, upgrade gcc only, you can using following command:
git submodule update --remote gcc
The branch info has recorded in .gitmodules file, which can set or update via git submodule add -b or git submodule set-branch.
However the only way to check which branch are using is to check .gitmodules file, here is the example for gcc, it's using releases/gcc-12 branch, so it will has a section named gcc and has a field branch is releases/gcc-12.
[submodule "gcc"]
path = gcc
url = ../gcc.git
branch = releases/gcc-12
riscv-gnu-toolchainriscv-gnu-toolchain also support using out-of-tree source to build toolchain, there is couple configure option to specify the source tree of each submodule/component.
For example you have a gcc in $HOME/gcc, use --with-gcc-src can specify that:
./configure --with-gcc-src=$HOME/gcc
Here is the list of configure option for specify source tree:
--with-binutils-src --with-gcc-src --with-gdb-src --with-glibc-src --with-linux-headers-src --with-llvm-src --with-musl-src --with-newlib-src --with-pk-src --with-qemu-src --with-spike-src
GCC contributions have to meet several requirements to qualify for upstream inclusion. Warning free compilation with a compiler build from the same sources is among them. The flag --enable-host-gcc does exaclty that:
-Werror to identify code issuesIf parts of newlib are going to be replaced with an external library (such as with libgloss-htif for Berkeley Host-Target Interface), you should take care to ensure that both newlib and the external library are built using the same code model. For more information about RISC-V code models, read this SiFive blog article.
Errors that indicate a code model mismatch include “relocation overflow” or “relocation truncated” errors from the linker being unable to successfully relocate symbols in the executable.
By default, riscv-gnu-toolchain builds newlib with -mcmodel=medlow. You can use the alternative medany code model (as used in libgloss-htif) by passing --with-cmodel=medany to the configure script.