device-caiman.mk - device/google/caimito - Git at Google

 #
 # Copyright (C) 2021 The Android Open-Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #

 ifdef RELEASE_GOOGLE_CAIMAN_RADIO_DIR
 RELEASE_GOOGLE_PRODUCT_RADIO_DIR := $(RELEASE_GOOGLE_CAIMAN_RADIO_DIR)
 endif
 ifdef RELEASE_GOOGLE_CAIMAN_RADIOCFG_DIR
 RELEASE_GOOGLE_PRODUCT_RADIOCFG_DIR := $(RELEASE_GOOGLE_CAIMAN_RADIOCFG_DIR)
 endif
 RELEASE_GOOGLE_BOOTLOADER_CAIMAN_DIR ?= 24D1# Keep this for pdk TODO: b/327119000
 RELEASE_GOOGLE_PRODUCT_BOOTLOADER_DIR := bootloader/$(RELEASE_GOOGLE_BOOTLOADER_CAIMAN_DIR)
 $(call soong_config_set,caimito_bootloader,prebuilt_dir,$(RELEASE_GOOGLE_BOOTLOADER_CAIMAN_DIR))

 ifdef RELEASE_KERNEL_CAIMAN_DIR
 TARGET_KERNEL_DIR ?= $(RELEASE_KERNEL_CAIMAN_DIR)
 TARGET_BOARD_KERNEL_HEADERS ?= $(RELEASE_KERNEL_CAIMAN_DIR)/kernel-headers
 else
 TARGET_KERNEL_DIR ?= device/google/caimito-kernels/6.1/24D1
 TARGET_BOARD_KERNEL_HEADERS ?= device/google/caimito-kernels/6.1/24D1/kernel-headers
 endif

 LOCAL_PATH := device/google/caimito

 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
     USE_UWBFIELDTESTQM := true
 endif
 ifeq ($(filter factory_caiman, $(TARGET_PRODUCT)),)
     include device/google/caimito/caiman/uwb/uwb_calibration.mk
 endif

 $(call inherit-product-if-exists, vendor/google_devices/caimito/prebuilts/device-vendor-caiman.mk)
 $(call inherit-product-if-exists, vendor/google_devices/zumapro/prebuilts/device-vendor.mk)
 $(call inherit-product-if-exists, vendor/google_devices/zumapro/proprietary/device-vendor.mk)
 $(call inherit-product-if-exists, vendor/google_devices/caiman/proprietary/device-vendor.mk)
 $(call inherit-product-if-exists, vendor/google_devices/caimito/proprietary/caiman/device-vendor-caiman.mk)
 $(call inherit-product-if-exists, vendor/qorvo/uwb/qm35-hal/Device.mk)

 ifeq ($(filter factory_caiman, $(TARGET_PRODUCT)),)
     $(call inherit-product-if-exists, vendor/google_devices/caimito/proprietary/WallpapersCaiman.mk)
 endif

 # display
 DEVICE_PACKAGE_OVERLAYS += device/google/caimito/caiman/overlay

 ifeq ($(RELEASE_PIXEL_AIDL_AUDIO_HAL),true)
 USE_AUDIO_HAL_AIDL := true
 endif

 include device/google/caimito/audio/caiman/audio-tables.mk
 include device/google/zumapro/device-shipping-common.mk
 include hardware/google/pixel/vibrator/cs40l26/device.mk
 include device/google/gs-common/bcmbt/bluetooth.mk
 include device/google/gs-common/touch/gti/predump_gti.mk
 include device/google/caimito/fingerprint/ultrasonic_udfps.mk
 include device/google/gs-common/modem/radio_ext/radio_ext.mk
 include device/google/gs-common/pixelsupport/pixelsupport.mk

 # Increment the SVN for any official public releases
 PRODUCT_VENDOR_PROPERTIES += \
     ro.vendor.build.svn=5

 # go/lyric-soong-variables
 $(call soong_config_set,lyric,camera_hardware,caiman)
 $(call soong_config_set,lyric,tuning_product,caiman)
 $(call soong_config_set,google3a_config,target_device,caiman)

 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.ignore_hdr_camera_layers=true

 # Init files
 PRODUCT_COPY_FILES += \
 	device/google/caimito/conf/init.caiman.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.caiman.rc

 # Recovery files
 PRODUCT_COPY_FILES += \
         device/google/caimito/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.caiman.rc

 # NFC
 PRODUCT_COPY_FILES += \
 	frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
 	frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
 	frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
 	frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
 	frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
 	device/google/caimito/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
 	device/google/caimito/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf

 PRODUCT_PACKAGES += \
 	$(RELEASE_PACKAGE_NFC_STACK) \
 	Tag \
 	android.hardware.nfc-service.st \
 	NfcOverlayCaiman

 # SecureElement
 PRODUCT_PACKAGES += \
 	android.hardware.secure_element-service.thales

 PRODUCT_COPY_FILES += \
 	frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
 	frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
 	device/google/caimito/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf

 # Bluetooth HAL
 PRODUCT_COPY_FILES += \
 	device/google/caimito/bluetooth/bt_vendor_overlay_caiman.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.bluetooth.a2dp_offload.supported=true \
     persist.bluetooth.a2dp_offload.disabled=false \
     persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac-opus

 # Coex Config
 PRODUCT_SOONG_NAMESPACES += device/google/caimito/radio/caiman/coex
 PRODUCT_PACKAGES += \
     camera_front_mipi_coex_table \
     camera_rear_main_dbr_coex_table \
     camera_rear_main_mipi_coex_table \
     camera_rear_tele_mipi_coex_table \
     camera_rear_wide_mipi_coex_table \
     display_primary_mipi_coex_table

 # Bluetooth Tx power caps
 PRODUCT_COPY_FILES += \
         $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_caiman.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \
         $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_caiman_JP.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_JP.csv \
         $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_caiman_CA.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_CA.csv \
         $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_caiman_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_EU.csv \
         $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_caiman_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_US.csv

 # DCK properties based on target
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.gms.dck.eligible_wcc=3 \
     ro.gms.dck.se_capability=1

 # POF
 PRODUCT_PRODUCT_PROPERTIES += \
     ro.bluetooth.finder.supported=true

 # Spatial Audio
 PRODUCT_PACKAGES += \
 	libspatialaudio

 # declare use of spatial audio
 PRODUCT_PROPERTY_OVERRIDES += \
        ro.audio.spatializer_enabled=true

 # declare use of stereo spatialization
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.audio.stereo_spatialization_enabled=true

 ifneq ($(USE_AUDIO_HAL_AIDL),true)
 # HIDL Sound Dose
 PRODUCT_PACKAGES += \
 	android.hardware.audio.sounddose-vendor-impl \
 	audio_sounddose_aoc
 endif

 # Audio CCA property
 PRODUCT_PROPERTY_OVERRIDES += \
 	persist.vendor.audio.cca.enabled=false

 # Bluetooth hci_inject test tool
 PRODUCT_PACKAGES_DEBUG += \
     hci_inject

 # Bluetooth OPUS codec
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.opus.enabled=true

 # Bluetooth SAR test tool
 PRODUCT_PACKAGES_DEBUG += \
     sar_test

 # Bluetooth EWP test tool
 PRODUCT_PACKAGES_DEBUG += \
     ewp_tool

 # Bluetooth AAC VBR
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.a2dp_aac.vbr_supported=true

 # Bluetooth Super Wide Band
 PRODUCT_PRODUCT_PROPERTIES += \
     bluetooth.hfp.swb.supported=true

 # Override BQR mask to enable LE Audio Choppy report, remove BTRT logging
 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.bqr.event_mask=295006 \
     persist.bluetooth.bqr.vnd_quality_mask=29 \
     persist.bluetooth.bqr.vnd_trace_mask=0 \
     persist.bluetooth.vendor.btsnoop=true
 else
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.bqr.event_mask=295006 \
     persist.bluetooth.bqr.vnd_quality_mask=16 \
     persist.bluetooth.bqr.vnd_trace_mask=0 \
     persist.bluetooth.vendor.btsnoop=false
 endif

 # default BDADDR for EVB only
 PRODUCT_PROPERTY_OVERRIDES += \
 	ro.vendor.bluetooth.evb_bdaddr="22:22:22:33:44:55"

 # Spatial Audio
 PRODUCT_PACKAGES += \
 	libspatialaudio \
 	librondo

 # Keymaster HAL
 #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= [email protected]

 # Gatekeeper HAL
 #LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= [email protected]


 # Gatekeeper
 # PRODUCT_PACKAGES += \
 # 	[email protected]

 # Keymint replaces Keymaster
 # PRODUCT_PACKAGES += \
 # 	android.hardware.security.keymint-service

 # Keymaster
 #PRODUCT_PACKAGES += \
 #	[email protected] \
 #	[email protected]

 #PRODUCT_PACKAGES += [email protected]
 #PRODUCT_PACKAGES += [email protected]
 #LOCAL_KEYMASTER_PRODUCT_PACKAGE := [email protected]
 #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= [email protected]

 # PRODUCT_PROPERTY_OVERRIDES += \
 # 	ro.hardware.keystore_desede=true \
 # 	ro.hardware.keystore=software \
 # 	ro.hardware.gatekeeper=software

 # PowerStats HAL
 PRODUCT_SOONG_NAMESPACES += \
     device/google/caimito/powerstats/caiman

 # WiFi Overlay
 PRODUCT_PACKAGES += \
     WifiOverlay2024

 # Settings Overlay
 PRODUCT_PACKAGES += \
     SettingsCaimanOverlay

 # Trusty liboemcrypto.so
 PRODUCT_SOONG_NAMESPACES += vendor/google_devices/caimito/prebuilts

 # UWB
 PRODUCT_SOONG_NAMESPACES += \
     device/google/caimito/caiman/uwb

 # Location
 PRODUCT_SOONG_NAMESPACES += device/google/caimito/location/caiman
 $(call soong_config_set, gpssdk, buildtype, $(TARGET_BUILD_VARIANT))
 PRODUCT_PACKAGES += gps.cfg

 # Display LBE
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1

 # Display ACL
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.0.brightness.acl.default=1

 #Thermal VT estimator
 PRODUCT_PACKAGES += \
     libthermal_tflite_wrapper

 PRODUCT_VENDOR_PROPERTIES += \
 	persist.device_config.configuration.disable_rescue_party=true

 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.udfps.als_feed_forward_supported=true \
     persist.vendor.udfps.lhbm_controlled_in_hal_supported=true

 # OIS with system imu
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.camera.ois_with_system_imu=true

 # Allow external binning setting
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.camera.allow_external_binning_setting=true

 # Camera Vendor property
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.camera.front_720P_always_binning=true

 # Enable camera exif model/make reporting
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.camera.exif_reveal_make_model=true

 # Display RRS default Config
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += persist.vendor.display.primary.boot_config=960x2142@120:120
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.preferred_mode=960x2142@120:120

 ifeq ($(filter factory_caiman, $(TARGET_PRODUCT)),)
     PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.xrr.version=2.1@202504:1.2@202404
     PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.blocking_zone.min_refresh_rate_by_nits=:1
     PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.vrr.expected_present.headsup_ns=30000000
     PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.vrr.expected_present.timeout_ns=500000000
 endif

 # Display OP HZ Config
 PRODUCT_VENDOR_PROPERTIES += \
     vendor.primarydisplay.op.hs_hz=120 \
     vendor.primarydisplay.op.ns_hz=120

 # Display fixed TE2
 PRODUCT_VENDOR_PROPERTIES += vendor.primarydisplay.fixed_te2.default_rate_hz=120

 # Vibrator HAL
 ACTUATOR_MODEL := luxshare_ict_081545
 ADAPTIVE_HAPTICS_FEATURE := adaptive_haptics_v1
 PRODUCT_VENDOR_PROPERTIES += \
     ro.vendor.vibrator.hal.chirp.enabled=1 \
     ro.vendor.vibrator.hal.device.mass=0.222 \
     ro.vendor.vibrator.hal.loc.coeff=2.8 \
     persist.vendor.vibrator.hal.context.enable=false \
     persist.vendor.vibrator.hal.context.scale=60 \
     persist.vendor.vibrator.hal.context.fade=true \
     persist.vendor.vibrator.hal.context.cooldowntime=1600 \
     persist.vendor.vibrator.hal.context.settlingtime=5000 \
     ro.vendor.vibrator.hal.pm.activetimeout=5

 # PKVM Memory Reclaim
 PRODUCT_VENDOR_PROPERTIES += \
     hypervisor.memory_reclaim.supported=1

 # Bluetooth LE Audio
 # Unicast
 PRODUCT_PRODUCT_PROPERTIES += \
 	bluetooth.profile.bap.unicast.client.enabled=true \
 	bluetooth.profile.csip.set_coordinator.enabled=true \
 	bluetooth.profile.hap.client.enabled=true \
 	bluetooth.profile.mcp.server.enabled=true \
 	bluetooth.profile.ccp.server.enabled=true \
 	bluetooth.profile.vcp.controller.enabled=true

 # Set support one-handed mode
 PRODUCT_PRODUCT_PROPERTIES += \
     ro.support_one_handed_mode=true

 ifeq ($(RELEASE_PIXEL_BROADCAST_ENABLED), true)
 PRODUCT_PRODUCT_PROPERTIES += \
 	bluetooth.profile.bap.broadcast.assist.enabled=true \
 	bluetooth.profile.bap.broadcast.source.enabled=true
 endif

 # LE Audio switcher in developer options
 PRODUCT_PRODUCT_PROPERTIES += \
 	ro.bluetooth.leaudio_switcher.supported=true \

 # Enable hardware offloading
 PRODUCT_PRODUCT_PROPERTIES += \
 	ro.bluetooth.leaudio_offload.supported=true \
 	persist.bluetooth.leaudio_offload.disabled=false

 # Bluetooth LE Audio CIS handover to SCO
 # Set the property only for the controller couldn't support CIS/SCO simultaneously. More detailed in b/242908683.
 PRODUCT_PRODUCT_PROPERTIES += \
 	persist.bluetooth.leaudio.notify.idle.during.call=true

 # LE Audio Offload Capabilities setting
 PRODUCT_COPY_FILES += \
     device/google/caimito/bluetooth/le_audio_codec_capabilities.xml:$(TARGET_COPY_OUT_VENDOR)/etc/le_audio_codec_capabilities.xml

 # Disable LE Audio dual mic SWB call support
 # This may depend on the BT controller capability or the launch strategy
 # For example, P22 BT chip is not able to support 32k dual mic
 # P23a disabled the 32k dual mic as it is not in the phase 2 launch plan
 PRODUCT_PRODUCT_PROPERTIES += \
     bluetooth.leaudio.dual_bidirection_swb.supported=true

 # LE Audio Unicast Allowlist
 PRODUCT_PRODUCT_PROPERTIES += \
    persist.bluetooth.leaudio.allow_list=SM-R510

 # Support LE & Classic concurrent encryption (b/330704060)
 PRODUCT_PRODUCT_PROPERTIES += \
     bluetooth.ble.allow_enc_with_bredr=true

 # Keyboard height ratio and bottom padding in dp for portrait mode
 PRODUCT_PRODUCT_PROPERTIES += \
           ro.com.google.ime.kb_pad_port_b=8 \
           ro.com.google.ime.height_ratio=1.12

 # Exynos RIL and telephony
 # Support RIL Domain-selection
 SUPPORT_RIL_DOMAIN_SELECTION := true

 # ETM
 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
 $(call inherit-product-if-exists, device/google/common/etm/device-userdebug-modules.mk)
 endif

 # Window Extensions
 $(call inherit-product, $(SRC_TARGET_DIR)/product/window_extensions.mk)

 # Connectivity Resources Overlay
 PRODUCT_PACKAGES += \
     ConnectivityResourcesOverlayCaimitoOverride

 #Component Override for Pixel Troubleshooting App
 PRODUCT_COPY_FILES += \
     device/google/caimito/caiman/caiman-component-overrides.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sysconfig/caiman-component-overrides.xml
	#
	# Copyright (C) 2021 The Android Open-Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#

	ifdef RELEASE_GOOGLE_CAIMAN_RADIO_DIR
	RELEASE_GOOGLE_PRODUCT_RADIO_DIR := $(RELEASE_GOOGLE_CAIMAN_RADIO_DIR)
	endif
	ifdef RELEASE_GOOGLE_CAIMAN_RADIOCFG_DIR
	RELEASE_GOOGLE_PRODUCT_RADIOCFG_DIR := $(RELEASE_GOOGLE_CAIMAN_RADIOCFG_DIR)
	endif
	RELEASE_GOOGLE_BOOTLOADER_CAIMAN_DIR ?= 24D1# Keep this for pdk TODO: b/327119000
	RELEASE_GOOGLE_PRODUCT_BOOTLOADER_DIR := bootloader/$(RELEASE_GOOGLE_BOOTLOADER_CAIMAN_DIR)
	$(call soong_config_set,caimito_bootloader,prebuilt_dir,$(RELEASE_GOOGLE_BOOTLOADER_CAIMAN_DIR))

	ifdef RELEASE_KERNEL_CAIMAN_DIR
	TARGET_KERNEL_DIR ?= $(RELEASE_KERNEL_CAIMAN_DIR)
	TARGET_BOARD_KERNEL_HEADERS ?= $(RELEASE_KERNEL_CAIMAN_DIR)/kernel-headers
	else
	TARGET_KERNEL_DIR ?= device/google/caimito-kernels/6.1/24D1
	TARGET_BOARD_KERNEL_HEADERS ?= device/google/caimito-kernels/6.1/24D1/kernel-headers
	endif

	LOCAL_PATH := device/google/caimito

	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	USE_UWBFIELDTESTQM := true
	endif
	ifeq ($(filter factory_caiman, $(TARGET_PRODUCT)),)
	include device/google/caimito/caiman/uwb/uwb_calibration.mk
	endif

	$(call inherit-product-if-exists, vendor/google_devices/caimito/prebuilts/device-vendor-caiman.mk)
	$(call inherit-product-if-exists, vendor/google_devices/zumapro/prebuilts/device-vendor.mk)
	$(call inherit-product-if-exists, vendor/google_devices/zumapro/proprietary/device-vendor.mk)
	$(call inherit-product-if-exists, vendor/google_devices/caiman/proprietary/device-vendor.mk)
	$(call inherit-product-if-exists, vendor/google_devices/caimito/proprietary/caiman/device-vendor-caiman.mk)
	$(call inherit-product-if-exists, vendor/qorvo/uwb/qm35-hal/Device.mk)

	ifeq ($(filter factory_caiman, $(TARGET_PRODUCT)),)
	$(call inherit-product-if-exists, vendor/google_devices/caimito/proprietary/WallpapersCaiman.mk)
	endif

	# display
	DEVICE_PACKAGE_OVERLAYS += device/google/caimito/caiman/overlay

	ifeq ($(RELEASE_PIXEL_AIDL_AUDIO_HAL),true)
	USE_AUDIO_HAL_AIDL := true
	endif

	include device/google/caimito/audio/caiman/audio-tables.mk
	include device/google/zumapro/device-shipping-common.mk
	include hardware/google/pixel/vibrator/cs40l26/device.mk
	include device/google/gs-common/bcmbt/bluetooth.mk
	include device/google/gs-common/touch/gti/predump_gti.mk
	include device/google/caimito/fingerprint/ultrasonic_udfps.mk
	include device/google/gs-common/modem/radio_ext/radio_ext.mk
	include device/google/gs-common/pixelsupport/pixelsupport.mk

	# Increment the SVN for any official public releases
	PRODUCT_VENDOR_PROPERTIES += \
	ro.vendor.build.svn=5

	# go/lyric-soong-variables
	$(call soong_config_set,lyric,camera_hardware,caiman)
	$(call soong_config_set,lyric,tuning_product,caiman)
	$(call soong_config_set,google3a_config,target_device,caiman)

	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.ignore_hdr_camera_layers=true

	# Init files
	PRODUCT_COPY_FILES += \
	device/google/caimito/conf/init.caiman.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.caiman.rc

	# Recovery files
	PRODUCT_COPY_FILES += \
	device/google/caimito/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.caiman.rc

	# NFC
	PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
	frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
	frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
	frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
	frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
	device/google/caimito/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
	device/google/caimito/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf

	PRODUCT_PACKAGES += \
	$(RELEASE_PACKAGE_NFC_STACK) \
	Tag \
	android.hardware.nfc-service.st \
	NfcOverlayCaiman

	# SecureElement
	PRODUCT_PACKAGES += \
	android.hardware.secure_element-service.thales

	PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
	frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
	device/google/caimito/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf

	# Bluetooth HAL
	PRODUCT_COPY_FILES += \
	device/google/caimito/bluetooth/bt_vendor_overlay_caiman.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.bluetooth.a2dp_offload.supported=true \
	persist.bluetooth.a2dp_offload.disabled=false \
	persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac-opus

	# Coex Config
	PRODUCT_SOONG_NAMESPACES += device/google/caimito/radio/caiman/coex
	PRODUCT_PACKAGES += \
	camera_front_mipi_coex_table \
	camera_rear_main_dbr_coex_table \
	camera_rear_main_mipi_coex_table \
	camera_rear_tele_mipi_coex_table \
	camera_rear_wide_mipi_coex_table \
	display_primary_mipi_coex_table

	# Bluetooth Tx power caps
	PRODUCT_COPY_FILES += \
	$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_caiman.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \
	$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_caiman_JP.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_JP.csv \
	$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_caiman_CA.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_CA.csv \
	$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_caiman_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_EU.csv \
	$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_caiman_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_US.csv

	# DCK properties based on target
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.gms.dck.eligible_wcc=3 \
	ro.gms.dck.se_capability=1

	# POF
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.bluetooth.finder.supported=true

	# Spatial Audio
	PRODUCT_PACKAGES += \
	libspatialaudio

	# declare use of spatial audio
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.audio.spatializer_enabled=true

	# declare use of stereo spatialization
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.audio.stereo_spatialization_enabled=true

	ifneq ($(USE_AUDIO_HAL_AIDL),true)
	# HIDL Sound Dose
	PRODUCT_PACKAGES += \
	android.hardware.audio.sounddose-vendor-impl \
	audio_sounddose_aoc
	endif

	# Audio CCA property
	PRODUCT_PROPERTY_OVERRIDES += \
	persist.vendor.audio.cca.enabled=false

	# Bluetooth hci_inject test tool
	PRODUCT_PACKAGES_DEBUG += \
	hci_inject

	# Bluetooth OPUS codec
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.opus.enabled=true

	# Bluetooth SAR test tool
	PRODUCT_PACKAGES_DEBUG += \
	sar_test

	# Bluetooth EWP test tool
	PRODUCT_PACKAGES_DEBUG += \
	ewp_tool

	# Bluetooth AAC VBR
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.a2dp_aac.vbr_supported=true

	# Bluetooth Super Wide Band
	PRODUCT_PRODUCT_PROPERTIES += \
	bluetooth.hfp.swb.supported=true

	# Override BQR mask to enable LE Audio Choppy report, remove BTRT logging
	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.bqr.event_mask=295006 \
	persist.bluetooth.bqr.vnd_quality_mask=29 \
	persist.bluetooth.bqr.vnd_trace_mask=0 \
	persist.bluetooth.vendor.btsnoop=true
	else
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.bqr.event_mask=295006 \
	persist.bluetooth.bqr.vnd_quality_mask=16 \
	persist.bluetooth.bqr.vnd_trace_mask=0 \
	persist.bluetooth.vendor.btsnoop=false
	endif

	# default BDADDR for EVB only
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.vendor.bluetooth.evb_bdaddr="22:22:22:33:44:55"

	# Spatial Audio
	PRODUCT_PACKAGES += \
	libspatialaudio \
	librondo

	# Keymaster HAL
	#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= [email protected]

	# Gatekeeper HAL
	#LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= [email protected]


	# Gatekeeper
	# PRODUCT_PACKAGES += \
	# [email protected]

	# Keymint replaces Keymaster
	# PRODUCT_PACKAGES += \
	# android.hardware.security.keymint-service

	# Keymaster
	#PRODUCT_PACKAGES += \
	# [email protected] \
	# [email protected]

	#PRODUCT_PACKAGES += [email protected]
	#PRODUCT_PACKAGES += [email protected]
	#LOCAL_KEYMASTER_PRODUCT_PACKAGE := [email protected]
	#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= [email protected]

	# PRODUCT_PROPERTY_OVERRIDES += \
	# ro.hardware.keystore_desede=true \
	# ro.hardware.keystore=software \
	# ro.hardware.gatekeeper=software

	# PowerStats HAL
	PRODUCT_SOONG_NAMESPACES += \
	device/google/caimito/powerstats/caiman

	# WiFi Overlay
	PRODUCT_PACKAGES += \
	WifiOverlay2024

	# Settings Overlay
	PRODUCT_PACKAGES += \
	SettingsCaimanOverlay

	# Trusty liboemcrypto.so
	PRODUCT_SOONG_NAMESPACES += vendor/google_devices/caimito/prebuilts

	# UWB
	PRODUCT_SOONG_NAMESPACES += \
	device/google/caimito/caiman/uwb

	# Location
	PRODUCT_SOONG_NAMESPACES += device/google/caimito/location/caiman
	$(call soong_config_set, gpssdk, buildtype, $(TARGET_BUILD_VARIANT))
	PRODUCT_PACKAGES += gps.cfg

	# Display LBE
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1

	# Display ACL
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.0.brightness.acl.default=1

	#Thermal VT estimator
	PRODUCT_PACKAGES += \
	libthermal_tflite_wrapper

	PRODUCT_VENDOR_PROPERTIES += \
	persist.device_config.configuration.disable_rescue_party=true

	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.udfps.als_feed_forward_supported=true \
	persist.vendor.udfps.lhbm_controlled_in_hal_supported=true

	# OIS with system imu
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.camera.ois_with_system_imu=true

	# Allow external binning setting
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.camera.allow_external_binning_setting=true

	# Camera Vendor property
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.camera.front_720P_always_binning=true

	# Enable camera exif model/make reporting
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.camera.exif_reveal_make_model=true

	# Display RRS default Config
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += persist.vendor.display.primary.boot_config=960x2142@120:120
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.preferred_mode=960x2142@120:120

	ifeq ($(filter factory_caiman, $(TARGET_PRODUCT)),)
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.xrr.version=2.1@202504:1.2@202404
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.blocking_zone.min_refresh_rate_by_nits=:1
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.vrr.expected_present.headsup_ns=30000000
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.vendor.primarydisplay.vrr.expected_present.timeout_ns=500000000
	endif

	# Display OP HZ Config
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.primarydisplay.op.hs_hz=120 \
	vendor.primarydisplay.op.ns_hz=120

	# Display fixed TE2
	PRODUCT_VENDOR_PROPERTIES += vendor.primarydisplay.fixed_te2.default_rate_hz=120

	# Vibrator HAL
	ACTUATOR_MODEL := luxshare_ict_081545
	ADAPTIVE_HAPTICS_FEATURE := adaptive_haptics_v1
	PRODUCT_VENDOR_PROPERTIES += \
	ro.vendor.vibrator.hal.chirp.enabled=1 \
	ro.vendor.vibrator.hal.device.mass=0.222 \
	ro.vendor.vibrator.hal.loc.coeff=2.8 \
	persist.vendor.vibrator.hal.context.enable=false \
	persist.vendor.vibrator.hal.context.scale=60 \
	persist.vendor.vibrator.hal.context.fade=true \
	persist.vendor.vibrator.hal.context.cooldowntime=1600 \
	persist.vendor.vibrator.hal.context.settlingtime=5000 \
	ro.vendor.vibrator.hal.pm.activetimeout=5

	# PKVM Memory Reclaim
	PRODUCT_VENDOR_PROPERTIES += \
	hypervisor.memory_reclaim.supported=1

	# Bluetooth LE Audio
	# Unicast
	PRODUCT_PRODUCT_PROPERTIES += \
	bluetooth.profile.bap.unicast.client.enabled=true \
	bluetooth.profile.csip.set_coordinator.enabled=true \
	bluetooth.profile.hap.client.enabled=true \
	bluetooth.profile.mcp.server.enabled=true \
	bluetooth.profile.ccp.server.enabled=true \
	bluetooth.profile.vcp.controller.enabled=true

	# Set support one-handed mode
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.support_one_handed_mode=true

	ifeq ($(RELEASE_PIXEL_BROADCAST_ENABLED), true)
	PRODUCT_PRODUCT_PROPERTIES += \
	bluetooth.profile.bap.broadcast.assist.enabled=true \
	bluetooth.profile.bap.broadcast.source.enabled=true
	endif

	# LE Audio switcher in developer options
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.bluetooth.leaudio_switcher.supported=true \

	# Enable hardware offloading
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.bluetooth.leaudio_offload.supported=true \
	persist.bluetooth.leaudio_offload.disabled=false

	# Bluetooth LE Audio CIS handover to SCO
	# Set the property only for the controller couldn't support CIS/SCO simultaneously. More detailed in b/242908683.
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.leaudio.notify.idle.during.call=true

	# LE Audio Offload Capabilities setting
	PRODUCT_COPY_FILES += \
	device/google/caimito/bluetooth/le_audio_codec_capabilities.xml:$(TARGET_COPY_OUT_VENDOR)/etc/le_audio_codec_capabilities.xml

	# Disable LE Audio dual mic SWB call support
	# This may depend on the BT controller capability or the launch strategy
	# For example, P22 BT chip is not able to support 32k dual mic
	# P23a disabled the 32k dual mic as it is not in the phase 2 launch plan
	PRODUCT_PRODUCT_PROPERTIES += \
	bluetooth.leaudio.dual_bidirection_swb.supported=true

	# LE Audio Unicast Allowlist
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.leaudio.allow_list=SM-R510

	# Support LE & Classic concurrent encryption (b/330704060)
	PRODUCT_PRODUCT_PROPERTIES += \
	bluetooth.ble.allow_enc_with_bredr=true

	# Keyboard height ratio and bottom padding in dp for portrait mode
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.com.google.ime.kb_pad_port_b=8 \
	ro.com.google.ime.height_ratio=1.12

	# Exynos RIL and telephony
	# Support RIL Domain-selection
	SUPPORT_RIL_DOMAIN_SELECTION := true

	# ETM
	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	$(call inherit-product-if-exists, device/google/common/etm/device-userdebug-modules.mk)
	endif

	# Window Extensions
	$(call inherit-product, $(SRC_TARGET_DIR)/product/window_extensions.mk)

	# Connectivity Resources Overlay
	PRODUCT_PACKAGES += \
	ConnectivityResourcesOverlayCaimitoOverride

	#Component Override for Pixel Troubleshooting App
	PRODUCT_COPY_FILES += \
	device/google/caimito/caiman/caiman-component-overrides.xml:$(TARGET_COPY_OUT_VENDOR)/etc/sysconfig/caiman-component-overrides.xml