| # Copyright 2017 The Android Open Source Project |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # If you don't need to do a full clean build but would like to touch |
| # a file or delete some intermediate files, add a clean step to the end |
| # of the list. These steps will only be run once, if they haven't been |
| # run before. |
| # |
| # E.g.: |
| # $(call add-clean-step, touch -c external/sqlite/sqlite3.h) |
| # $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/STATIC_LIBRARIES/libz_intermediates) |
| # |
| # Always use "touch -c" and "rm -f" or "rm -rf" to gracefully deal with |
| # files that are missing or have been moved. |
| # |
| # Use $(PRODUCT_OUT) to get to the "out/target/product/blah/" directory. |
| # Use $(OUT_DIR) to refer to the "out" directory. |
| # |
| # If you need to re-do something that's already mentioned, just copy |
| # the command and add it to the bottom of the list. E.g., if a change |
| # that you made last week required touching a file and a change you |
| # made today requires touching the same file, just copy the old |
| # touch step and add it to the end of the list. |
| # |
| # ************************************************ |
| # NEWER CLEAN STEPS MUST BE AT THE END OF THE LIST |
| # ************************************************ |
| |
| # For example: |
| #$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/APPS/AndroidTests_intermediates) |
| #$(call add-clean-step, rm -rf $(OUT_DIR)/target/common/obj/JAVA_LIBRARIES/core_intermediates) |
| #$(call add-clean-step, find $(OUT_DIR) -type f -name "IGTalkSession*" -print0 | xargs -0 rm -f) |
| #$(call add-clean-step, rm -rf $(PRODUCT_OUT)/data/*) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor) |
| |
| # Remove /system/lib[64]/vndk-sp/libz.so |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/vndk-sp/libz.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib64/vndk-sp/libz.so) |
| |
| # Remove Power HAL 1.2 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.power@1.2-service.crosshatch-libperfmgr.rc) |
| |
| # Remove Vibrator HAL 1.1 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.vibrator@1.1-service.crosshatch.rc) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.vibrator@1.1-service.crosshatch) |
| |
| # Remove /product mount point |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/product) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/product) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/product) |
| |
| # Remove android.hardware.audio*@2.0 implementation |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib/hw/android.hardware.audio*@2.0-impl.so) |
| |
| # Adds product.img |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/product) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/product) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/fonts) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/framework) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/media) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/priv-app) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/product) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/usr) |
| |
| # Remove default [email protected] |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.health@2.0-service) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.health@2.0-service.rc) |
| |
| # Remove healthd |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/bin/healthd) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/init/healthd.rc) |
| |
| # Remove KM3 RC |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.keymaster@3.0-service-qti.rc) |
| |
| # Remove Codec2.0 software process |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/hw/hardware.google.media.c2@1.0-service-software) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/hardware.google.media.c2@1.0-service-software.rc) |
| |
| # Remove default [email protected] |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.graphics.composer@2.1-service) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.graphics.composer@2.1-service.rc) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib64/hw/android.hardware.graphics.composer@2.1-impl.so) |
| |
| # Remove StrongBox RC |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.keymaster@4.1-service.citadel.rc) |
| |
| # Migrate to versioned VNDK directory |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/lib/vndk-sp) |
| |
| # Remove non-qti-display mapper (b/79269048) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib/hw/android.hardware.graphics.mapper@2.0-impl.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib64/hw/android.hardware.graphics.mapper@2.0-impl.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib/hw/android.hardware.graphics.allocator@2.0-impl.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib64/hw/android.hardware.graphics.allocator@2.0-impl.so) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.graphics.allocator@2.0-service) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.graphics.allocator@2.0-service.rc) |
| |
| #AU300 cleanup |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/product) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/obj/include) |
| |
| # Secure_element HAL for eSE1 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.secure_element@1.0-service.rc) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.secure_element@1.0-service) |
| |
| # ThermalHAL 1.1 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.thermal@1.1-service.crosshatch.rc) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.thermal@1.1-service.crosshatch) |
| |
| # Verified boot xml moved to /product |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/permissions/android.software.verified_boot.xml) |
| |
| # Move libnfc-nci.conf to /product |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/etc/libnfc-nci.conf) |
| |
| # Remove default [email protected] |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.graphics.composer@2.2-service) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.graphics.composer@2.2-service.rc) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/lib64/hw/android.hardware.graphics.composer@2.2-impl.so) |
| |
| # Remove /firmware which used to be a symlink to /vendor/firmware_mnt |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/root/firmware) |
| |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/system/app/webview) |
| |
| # Moved to /product |
| $(call add-clean-step, rm -f $(PRODUCT_OUT)/system/etc/sysconfig/qti_whitelist.xml) |
| |
| # Rename power HAL |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.power@1.3-service.crosshatch-libperfmgr.rc) |
| |
| # Remove generic atrace HAL |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.atrace@1.0-service.rc) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/vintf/manifest/android.hardware.atrace@1.0-service.xml) |
| |
| # Combine memtrack/thermal/vibrator HALs into small_hals.crosshatch-service |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.vibrator@1.2-service.crosshatch.rc) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.vibrator@1.2-service.crosshatch) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.memtrack@1.0-service.rc) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.memtrack@1.0-service) |
| |
| # Removing GSI keys from the ramdisk. |
| # Those keys will be embedded into VTS instead, to verify the GSI image in used. |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/first_stage_ramdisk/avb/q-gsi.avbpubkey) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/first_stage_ramdisk/avb/r-gsi.avbpubkey) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/recovery/root/first_stage_ramdisk/avb/s-gsi.avbpubkey) |
| |
| # Use stable aidl power HAL |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.power@1.3-service.pixel-libperfmgr.rc) |
| |
| # Update to USB HAL 1.3 |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.usb@1.2-service.crosshatch) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.usb@1.2-service.crosshatch.rc) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/vintf/manifest/android.hardware.usb@1.2-service.crosshatch.xml) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/bin/hw/android.hardware.usb@1.3-service.crosshatch) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/init/android.hardware.usb@1.3-service.crosshatch.rc) |
| $(call add-clean-step, rm -rf $(PRODUCT_OUT)/vendor/etc/vintf/manifest/android.hardware.usb@1.3-service.crosshatch.xml) |
