device-felix.mk - device/google/felix - Git at Google

 #
 # Copyright (C) 2021 The Android Open-Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #

 TARGET_KERNEL_DIR ?= device/google/felix-kernel
 TARGET_BOARD_KERNEL_HEADERS := device/google/felix-kernel/kernel-headers
 TARGET_RECOVERY_DEFAULT_ROTATION := ROTATION_RIGHT

 $(call inherit-product-if-exists, vendor/google_devices/felix/prebuilts/device-vendor-felix.mk)
 $(call inherit-product-if-exists, vendor/google_devices/gs201/prebuilts/device-vendor.mk)
 $(call inherit-product-if-exists, vendor/google_devices/gs201/proprietary/device-vendor.mk)
 $(call inherit-product-if-exists, vendor/google_devices/felix/proprietary/felix/device-vendor-felix.mk)
 $(call inherit-product-if-exists, vendor/google_devices/felix/proprietary/device-vendor.mk)
 $(call inherit-product-if-exists, vendor/google_devices/felix/proprietary/WallpapersFelix.mk)

 DEVICE_PACKAGE_OVERLAYS += device/google/felix/felix/overlay

 include device/google/felix/audio/felix/audio-tables.mk
 include device/google/gs201/device-shipping-common.mk
 $(call soong_config_set,fp_hal_feature,pixel_product, product_a)
 include device/google/felix/vibrator/cs40l26/device.mk
 include device/google/gs-common/bcmbt/bluetooth.mk
 include device/google/gs-common/display/dump_second_display.mk
 include device/google/gs-common/touch/gti/gti.mk
 include device/google/gs-common/touch/stm/stm6.mk
 ifeq ($(filter factory_felix, $(TARGET_PRODUCT)),)
 include device/google/felix/uwb/uwb_calibration.mk
 endif

 # go/lyric-soong-variables
 $(call soong_config_set,lyric,camera_hardware,felix)
 $(call soong_config_set,lyric,tuning_product,felix)
 $(call soong_config_set,google3a_config,target_device,felix)

 # Init files
 PRODUCT_COPY_FILES += \
 	device/google/felix/conf/init.felix.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.felix.rc

 # Recovery files
 PRODUCT_COPY_FILES += \
 	device/google/felix/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.felix.rc

 # insmod files
 PRODUCT_COPY_FILES += \
 	device/google/felix/init.insmod.felix.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.felix.cfg

 # Camera
 PRODUCT_COPY_FILES += \
 	device/google/felix/media_profiles_felix.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml

 # Media Performance Class 13
 PRODUCT_PROPERTY_OVERRIDES += ro.odm.build.media_performance_class=33

 # Display Config
 PRODUCT_COPY_FILES += \
 	device/google/felix/felix/display_colordata_cal1.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_cal1.pb \
 	device/google/felix/felix/display_colordata_dev_cal1.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_dev_cal1.pb \
 	device/google/felix/felix/display_golden_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_cal0.pb \
 	device/google/felix/felix/display_golden_cal1.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_cal1.pb

 # Display
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
 	vendor.display.lbe.supported=1 \
 	vendor.display.async_off.supported=true \
 	ro.surface_flinger.ignore_hdr_camera_layers=true

 #config of display brightness dimming
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.0.brightness.dimming.usage=1
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.1.brightness.dimming.usage=2

 # Early wake up sysfs path for the secondary display
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
 	vendor.display.secondary_early_wakeup_node=/sys/devices/platform/1c241000.drmdecon/early_wakeup

 # NFC
 PRODUCT_COPY_FILES += \
 	frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
 	frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
 	frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
 	frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
 	frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
 	device/google/felix/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
 	device/google/felix/nfc/libnfc-nci-felix.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf

 PRODUCT_PACKAGES += \
 	NfcNci \
 	Tag \
 	android.hardware.nfc-service.st

 # SecureElement
 PRODUCT_PACKAGES += \
 	android.hardware.secure_element@1.2-service-gto \
 	android.hardware.secure_element@1.2-service-gto-ese2

 PRODUCT_COPY_FILES += \
 	frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
 	frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
 	device/google/felix/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf \
 	device/google/felix/nfc/libse-gto-hal2.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal2.conf

 DEVICE_MANIFEST_FILE += \
 	device/google/felix/nfc/manifest_se.xml

 # Thermal Config
 PRODUCT_COPY_FILES += \
 	device/google/felix/thermal_info_config_felix.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json \
 	device/google/felix/thermal_info_config_proactive_skin_felix.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_proactive_skin.json \
 	device/google/felix/thermal_info_config_charge_felix.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_charge.json

 # Power HAL config
 PRODUCT_COPY_FILES += \
 	device/google/felix/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json

 # Bluetooth HAL
 PRODUCT_COPY_FILES += \
 	device/google/felix/bluetooth/bt_vendor_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.bluetooth.a2dp_offload.supported=true \
     persist.bluetooth.a2dp_offload.disabled=false \
     persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac-opus

 # Bluetooth Tx power caps
 PRODUCT_COPY_FILES += \
     $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_felix_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \
     $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_felix_JP.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_JP.csv \
     $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_felix_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_EU.csv \
     $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_felix_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_US.csv

 # Spatial Audio
 PRODUCT_PACKAGES += \
 	libspatialaudio

 # optimize spatializer effect
 PRODUCT_PROPERTY_OVERRIDES += \
        audio.spatializer.effect.util_clamp_min=300

 # declare use of spatial audio
 PRODUCT_PROPERTY_OVERRIDES += \
        ro.audio.spatializer_enabled=true \
        ro.audio.spatializer_transaural_enabled_default=false \
        persist.vendor.audio.spatializer.speaker_enabled=true

 # Bluetooth SAR test tool
 PRODUCT_PACKAGES_DEBUG += \
     sar_test

 # Bluetooth hci_inject test tool
 PRODUCT_PACKAGES_DEBUG += \
     hci_inject

 # Bluetooth
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.a2dp_aac.vbr_supported=true

 # default BDADDR for EVB only
 PRODUCT_PROPERTY_OVERRIDES += \
 	ro.vendor.bluetooth.evb_bdaddr="22:22:22:33:44:55"

 # Keymaster HAL
 #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= [email protected]

 # Gatekeeper HAL
 #LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= [email protected]


 # Gatekeeper
 # PRODUCT_PACKAGES += \
 # 	[email protected]

 # Keymint replaces Keymaster
 # PRODUCT_PACKAGES += \
 # 	android.hardware.security.keymint-service

 # Keymaster
 #PRODUCT_PACKAGES += \
 #	[email protected] \
 #	[email protected]

 #PRODUCT_PACKAGES += [email protected]
 #PRODUCT_PACKAGES += [email protected]
 #LOCAL_KEYMASTER_PRODUCT_PACKAGE := [email protected]
 #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= [email protected]

 # PRODUCT_PROPERTY_OVERRIDES += \
 # 	ro.hardware.keystore_desede=true \
 # 	ro.hardware.keystore=software \
 # 	ro.hardware.gatekeeper=software

 # PowerStats HAL
 PRODUCT_SOONG_NAMESPACES += \
     device/google/felix/powerstats/felix \
     device/google/felix

 # Increment the SVN for any official public releases
 PRODUCT_VENDOR_PROPERTIES += \
     ro.vendor.build.svn=29

 # Vibrator HAL
 PRODUCT_VENDOR_PROPERTIES +=\
     ro.vendor.vibrator.hal.long.frequency.shift=0 \
     ro.vendor.vibrator.hal.gpio.num=44 \
     ro.vendor.vibrator.hal.gpio.shift=2
 ACTUATOR_MODEL := luxshare_ict_lt_xlra1906d

 # Fingerprint
 include device/google/gs101/fingerprint/fpc1540/sw42/fpc1540.mk
 FPC_MODULE_TYPE=1542_C
 # Fingerprint config
 include device/google/felix/fingerprint_config.mk

 # The default value of this variable is false and should only be set to true when
 # the device allows users to enable the seamless transfer feature.
 PRODUCT_PRODUCT_PROPERTIES += \
    euicc.seamless_transfer_enabled_in_non_qs=true

 # DCK properties based on target
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.gms.dck.eligible_wcc=3 \
     ro.gms.dck.se_capability=1

 # Graphics
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.enable_frame_rate_override=true
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.set_idle_timer_ms_4619827677550801152=80
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.support_kernel_idle_timer_4619827677550801152=true
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.set_idle_timer_ms_4619827677550801153=1500
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.support_kernel_idle_timer_4619827677550801153=false

 # Set zram size
 PRODUCT_VENDOR_PROPERTIES += \
     vendor.zram.size=3g

 # SKU specific RROs
 PRODUCT_PACKAGES += \
     SettingsOverlayG0B96 \
     SettingsOverlayG9FPL

 # Trusty liboemcrypto.so
 PRODUCT_SOONG_NAMESPACES += vendor/google_devices/felix/prebuilts

 # Set zram size
 PRODUCT_VENDOR_PROPERTIES += \
        vendor.zram.size=3g

 # Set support one-handed mode
 PRODUCT_PRODUCT_PROPERTIES += \
     ro.support_one_handed_mode=false

 # Hinge angle sensor
 PRODUCT_COPY_FILES += \
 	frameworks/native/data/etc/android.hardware.sensor.hinge_angle.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.hinge_angle.xml

 # Location
 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
     PRODUCT_COPY_FILES += \
         device/google/felix/location/gps.xml.f10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml \
         device/google/felix/location/lhd.conf.f10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
         device/google/felix/location/scd.conf.f10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
 else
     PRODUCT_COPY_FILES += \
         device/google/felix/location/gps_user.xml.f10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml \
         device/google/felix/location/lhd_user.conf.f10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
         device/google/felix/location/scd_user.conf.f10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
 endif

 PRODUCT_PACKAGES += \
         UwbOverlayF10 \
         WifiOverlay2023Mid_F10

 # MIPI Coex Configs
 PRODUCT_COPY_FILES += \
     device/google/felix/felix/radio/felix_camera_front_inner_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_inner_mipi_coex_table.csv \
     device/google/felix/felix/radio/felix_display_secondary_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/display_secondary_mipi_coex_table.csv

 PRODUCT_SOONG_NAMESPACES += device/google/felix

 DEVICE_PRODUCT_COMPATIBILITY_MATRIX_FILE += device/google/felix/device_framework_matrix_product_felix.xml

 # Device features
 PRODUCT_COPY_FILES += \
     frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml

 # Increase thread priority for nodes stop
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.camera.increase_thread_priority_nodes_stop=true

 ##Audio Vendor property
 PRODUCT_PROPERTY_OVERRIDES += \
 	persist.vendor.audio.cca.enabled=true

 # Camera
 PRODUCT_PROPERTY_OVERRIDES += \
     persist.vendor.camera.adjust_backend_min_freq_for_1p_front_video_1080p_30fps=1 \
     persist.vendor.camera.extended_launch_boost=1 \
     persist.vendor.camera.multicam_streaming_boost=1 \
     persist.vendor.camera.optimized_tnr_freq=1 \
     persist.vendor.camera.raise_buf_allocation_priority=1 \
     persist.vendor.camera.start_cpu_throttling_at_moderate_thermal=1 \
     camera.enable_landscape_to_portrait=true \
     persist.vendor.camera.debug.bypass_csi_link_error=true \
     vendor.camera.allow_sensor_binning_aspect_ratio_to_override_itp_output=false \
     vendor.camera.support_specific_stream_aspect_ratio=0.75

 # Enable camera exif model/make reporting
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.camera.exif_reveal_make_model=true

 # Enable front camera always binning for 720P or smaller resolution
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.camera.front_720P_always_binning=true

 # Bluetooth OPUS codec
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.opus.enabled=true

 # WLC userdebug specific
 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
     PRODUCT_COPY_FILES += \
         device/google/gs201/init.hardware.wlc.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.wlc.rc
 endif

 # Bluetooth LE Audio
 PRODUCT_PRODUCT_PROPERTIES += \
     ro.bluetooth.leaudio_offload.supported=true \
     persist.bluetooth.leaudio_offload.disabled=false \
     ro.bluetooth.leaudio_switcher.supported=true \
     bluetooth.profile.bap.unicast.client.enabled=true \
     bluetooth.profile.csip.set_coordinator.enabled=true \
     bluetooth.profile.hap.client.enabled=true \
     bluetooth.profile.mcp.server.enabled=true \
     bluetooth.profile.ccp.server.enabled=true \
     bluetooth.profile.vcp.controller.enabled=true \

 # Override BQR mask to enable LE Audio Choppy report
 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.bqr.event_mask=262238
 else
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.bqr.event_mask=94
 endif

 # Bluetooth LE Audio CIS handover to SCO
 # Set the property only if the controller doesn't support CIS and SCO
 # simultaneously. More details in b/242908683.
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.leaudio.notify.idle.during.call=true

 # LE Audio Offload Capabilities Setting
 PRODUCT_COPY_FILES += \
     device/google/felix/bluetooth/le_audio_codec_capabilities.xml:$(TARGET_COPY_OUT_VENDOR)/etc/le_audio_codec_capabilities.xml

 # Bluetooth EWP test tool
 PRODUCT_PACKAGES_DEBUG += \
     ewp_tool
	#
	# Copyright (C) 2021 The Android Open-Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#

	TARGET_KERNEL_DIR ?= device/google/felix-kernel
	TARGET_BOARD_KERNEL_HEADERS := device/google/felix-kernel/kernel-headers
	TARGET_RECOVERY_DEFAULT_ROTATION := ROTATION_RIGHT

	$(call inherit-product-if-exists, vendor/google_devices/felix/prebuilts/device-vendor-felix.mk)
	$(call inherit-product-if-exists, vendor/google_devices/gs201/prebuilts/device-vendor.mk)
	$(call inherit-product-if-exists, vendor/google_devices/gs201/proprietary/device-vendor.mk)
	$(call inherit-product-if-exists, vendor/google_devices/felix/proprietary/felix/device-vendor-felix.mk)
	$(call inherit-product-if-exists, vendor/google_devices/felix/proprietary/device-vendor.mk)
	$(call inherit-product-if-exists, vendor/google_devices/felix/proprietary/WallpapersFelix.mk)

	DEVICE_PACKAGE_OVERLAYS += device/google/felix/felix/overlay

	include device/google/felix/audio/felix/audio-tables.mk
	include device/google/gs201/device-shipping-common.mk
	$(call soong_config_set,fp_hal_feature,pixel_product, product_a)
	include device/google/felix/vibrator/cs40l26/device.mk
	include device/google/gs-common/bcmbt/bluetooth.mk
	include device/google/gs-common/display/dump_second_display.mk
	include device/google/gs-common/touch/gti/gti.mk
	include device/google/gs-common/touch/stm/stm6.mk
	ifeq ($(filter factory_felix, $(TARGET_PRODUCT)),)
	include device/google/felix/uwb/uwb_calibration.mk
	endif

	# go/lyric-soong-variables
	$(call soong_config_set,lyric,camera_hardware,felix)
	$(call soong_config_set,lyric,tuning_product,felix)
	$(call soong_config_set,google3a_config,target_device,felix)

	# Init files
	PRODUCT_COPY_FILES += \
	device/google/felix/conf/init.felix.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.felix.rc

	# Recovery files
	PRODUCT_COPY_FILES += \
	device/google/felix/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.felix.rc

	# insmod files
	PRODUCT_COPY_FILES += \
	device/google/felix/init.insmod.felix.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.felix.cfg

	# Camera
	PRODUCT_COPY_FILES += \
	device/google/felix/media_profiles_felix.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml

	# Media Performance Class 13
	PRODUCT_PROPERTY_OVERRIDES += ro.odm.build.media_performance_class=33

	# Display Config
	PRODUCT_COPY_FILES += \
	device/google/felix/felix/display_colordata_cal1.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_cal1.pb \
	device/google/felix/felix/display_colordata_dev_cal1.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_dev_cal1.pb \
	device/google/felix/felix/display_golden_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_cal0.pb \
	device/google/felix/felix/display_golden_cal1.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_cal1.pb

	# Display
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
	vendor.display.lbe.supported=1 \
	vendor.display.async_off.supported=true \
	ro.surface_flinger.ignore_hdr_camera_layers=true

	#config of display brightness dimming
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.0.brightness.dimming.usage=1
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.1.brightness.dimming.usage=2

	# Early wake up sysfs path for the secondary display
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += \
	vendor.display.secondary_early_wakeup_node=/sys/devices/platform/1c241000.drmdecon/early_wakeup

	# NFC
	PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
	frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
	frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
	frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
	frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
	device/google/felix/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
	device/google/felix/nfc/libnfc-nci-felix.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf

	PRODUCT_PACKAGES += \
	NfcNci \
	Tag \
	android.hardware.nfc-service.st

	# SecureElement
	PRODUCT_PACKAGES += \
	android.hardware.secure_element@1.2-service-gto \
	android.hardware.secure_element@1.2-service-gto-ese2

	PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
	frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
	device/google/felix/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf \
	device/google/felix/nfc/libse-gto-hal2.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal2.conf

	DEVICE_MANIFEST_FILE += \
	device/google/felix/nfc/manifest_se.xml

	# Thermal Config
	PRODUCT_COPY_FILES += \
	device/google/felix/thermal_info_config_felix.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json \
	device/google/felix/thermal_info_config_proactive_skin_felix.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_proactive_skin.json \
	device/google/felix/thermal_info_config_charge_felix.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_charge.json

	# Power HAL config
	PRODUCT_COPY_FILES += \
	device/google/felix/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json

	# Bluetooth HAL
	PRODUCT_COPY_FILES += \
	device/google/felix/bluetooth/bt_vendor_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.bluetooth.a2dp_offload.supported=true \
	persist.bluetooth.a2dp_offload.disabled=false \
	persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac-opus

	# Bluetooth Tx power caps
	PRODUCT_COPY_FILES += \
	$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_felix_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \
	$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_felix_JP.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_JP.csv \
	$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_felix_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_EU.csv \
	$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_felix_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_US.csv

	# Spatial Audio
	PRODUCT_PACKAGES += \
	libspatialaudio

	# optimize spatializer effect
	PRODUCT_PROPERTY_OVERRIDES += \
	audio.spatializer.effect.util_clamp_min=300

	# declare use of spatial audio
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.audio.spatializer_enabled=true \
	ro.audio.spatializer_transaural_enabled_default=false \
	persist.vendor.audio.spatializer.speaker_enabled=true

	# Bluetooth SAR test tool
	PRODUCT_PACKAGES_DEBUG += \
	sar_test

	# Bluetooth hci_inject test tool
	PRODUCT_PACKAGES_DEBUG += \
	hci_inject

	# Bluetooth
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.a2dp_aac.vbr_supported=true

	# default BDADDR for EVB only
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.vendor.bluetooth.evb_bdaddr="22:22:22:33:44:55"

	# Keymaster HAL
	#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= [email protected]

	# Gatekeeper HAL
	#LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= [email protected]


	# Gatekeeper
	# PRODUCT_PACKAGES += \
	# [email protected]

	# Keymint replaces Keymaster
	# PRODUCT_PACKAGES += \
	# android.hardware.security.keymint-service

	# Keymaster
	#PRODUCT_PACKAGES += \
	# [email protected] \
	# [email protected]

	#PRODUCT_PACKAGES += [email protected]
	#PRODUCT_PACKAGES += [email protected]
	#LOCAL_KEYMASTER_PRODUCT_PACKAGE := [email protected]
	#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= [email protected]

	# PRODUCT_PROPERTY_OVERRIDES += \
	# ro.hardware.keystore_desede=true \
	# ro.hardware.keystore=software \
	# ro.hardware.gatekeeper=software

	# PowerStats HAL
	PRODUCT_SOONG_NAMESPACES += \
	device/google/felix/powerstats/felix \
	device/google/felix

	# Increment the SVN for any official public releases
	PRODUCT_VENDOR_PROPERTIES += \
	ro.vendor.build.svn=29

	# Vibrator HAL
	PRODUCT_VENDOR_PROPERTIES +=\
	ro.vendor.vibrator.hal.long.frequency.shift=0 \
	ro.vendor.vibrator.hal.gpio.num=44 \
	ro.vendor.vibrator.hal.gpio.shift=2
	ACTUATOR_MODEL := luxshare_ict_lt_xlra1906d

	# Fingerprint
	include device/google/gs101/fingerprint/fpc1540/sw42/fpc1540.mk
	FPC_MODULE_TYPE=1542_C
	# Fingerprint config
	include device/google/felix/fingerprint_config.mk

	# The default value of this variable is false and should only be set to true when
	# the device allows users to enable the seamless transfer feature.
	PRODUCT_PRODUCT_PROPERTIES += \
	euicc.seamless_transfer_enabled_in_non_qs=true

	# DCK properties based on target
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.gms.dck.eligible_wcc=3 \
	ro.gms.dck.se_capability=1

	# Graphics
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.enable_frame_rate_override=true
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.set_idle_timer_ms_4619827677550801152=80
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.support_kernel_idle_timer_4619827677550801152=true
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.set_idle_timer_ms_4619827677550801153=1500
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += debug.sf.support_kernel_idle_timer_4619827677550801153=false

	# Set zram size
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.zram.size=3g

	# SKU specific RROs
	PRODUCT_PACKAGES += \
	SettingsOverlayG0B96 \
	SettingsOverlayG9FPL

	# Trusty liboemcrypto.so
	PRODUCT_SOONG_NAMESPACES += vendor/google_devices/felix/prebuilts

	# Set zram size
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.zram.size=3g

	# Set support one-handed mode
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.support_one_handed_mode=false

	# Hinge angle sensor
	PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/android.hardware.sensor.hinge_angle.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.sensor.hinge_angle.xml

	# Location
	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	PRODUCT_COPY_FILES += \
	device/google/felix/location/gps.xml.f10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml \
	device/google/felix/location/lhd.conf.f10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
	device/google/felix/location/scd.conf.f10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
	else
	PRODUCT_COPY_FILES += \
	device/google/felix/location/gps_user.xml.f10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml \
	device/google/felix/location/lhd_user.conf.f10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
	device/google/felix/location/scd_user.conf.f10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
	endif

	PRODUCT_PACKAGES += \
	UwbOverlayF10 \
	WifiOverlay2023Mid_F10

	# MIPI Coex Configs
	PRODUCT_COPY_FILES += \
	device/google/felix/felix/radio/felix_camera_front_inner_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_inner_mipi_coex_table.csv \
	device/google/felix/felix/radio/felix_display_secondary_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/display_secondary_mipi_coex_table.csv

	PRODUCT_SOONG_NAMESPACES += device/google/felix

	DEVICE_PRODUCT_COMPATIBILITY_MATRIX_FILE += device/google/felix/device_framework_matrix_product_felix.xml

	# Device features
	PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml

	# Increase thread priority for nodes stop
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.camera.increase_thread_priority_nodes_stop=true

	##Audio Vendor property
	PRODUCT_PROPERTY_OVERRIDES += \
	persist.vendor.audio.cca.enabled=true

	# Camera
	PRODUCT_PROPERTY_OVERRIDES += \
	persist.vendor.camera.adjust_backend_min_freq_for_1p_front_video_1080p_30fps=1 \
	persist.vendor.camera.extended_launch_boost=1 \
	persist.vendor.camera.multicam_streaming_boost=1 \
	persist.vendor.camera.optimized_tnr_freq=1 \
	persist.vendor.camera.raise_buf_allocation_priority=1 \
	persist.vendor.camera.start_cpu_throttling_at_moderate_thermal=1 \
	camera.enable_landscape_to_portrait=true \
	persist.vendor.camera.debug.bypass_csi_link_error=true \
	vendor.camera.allow_sensor_binning_aspect_ratio_to_override_itp_output=false \
	vendor.camera.support_specific_stream_aspect_ratio=0.75

	# Enable camera exif model/make reporting
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.camera.exif_reveal_make_model=true

	# Enable front camera always binning for 720P or smaller resolution
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.camera.front_720P_always_binning=true

	# Bluetooth OPUS codec
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.opus.enabled=true

	# WLC userdebug specific
	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	PRODUCT_COPY_FILES += \
	device/google/gs201/init.hardware.wlc.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.wlc.rc
	endif

	# Bluetooth LE Audio
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.bluetooth.leaudio_offload.supported=true \
	persist.bluetooth.leaudio_offload.disabled=false \
	ro.bluetooth.leaudio_switcher.supported=true \
	bluetooth.profile.bap.unicast.client.enabled=true \
	bluetooth.profile.csip.set_coordinator.enabled=true \
	bluetooth.profile.hap.client.enabled=true \
	bluetooth.profile.mcp.server.enabled=true \
	bluetooth.profile.ccp.server.enabled=true \
	bluetooth.profile.vcp.controller.enabled=true \

	# Override BQR mask to enable LE Audio Choppy report
	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.bqr.event_mask=262238
	else
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.bqr.event_mask=94
	endif

	# Bluetooth LE Audio CIS handover to SCO
	# Set the property only if the controller doesn't support CIS and SCO
	# simultaneously. More details in b/242908683.
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.leaudio.notify.idle.during.call=true

	# LE Audio Offload Capabilities Setting
	PRODUCT_COPY_FILES += \
	device/google/felix/bluetooth/le_audio_codec_capabilities.xml:$(TARGET_COPY_OUT_VENDOR)/etc/le_audio_codec_capabilities.xml

	# Bluetooth EWP test tool
	PRODUCT_PACKAGES_DEBUG += \
	ewp_tool