conf/init.pantah.rc

# Cheetah/Panther specific init.rc

on init
    # NFC streset tool name
    setprop persist.vendor.nfc.streset libstreset21
    setprop persist.vendor.se.streset libstreset21

on init && property:ro.vendor.factory=1
    import /vendor/etc/init/hw/init.factory.rc

on early-boot
    # Wait for insmod_sh to finish all common modules
    wait_for_prop vendor.common.modules.ready 1
    start insmod_sh_pantah

service insmod_sh_pantah /vendor/bin/insmod.sh /vendor/etc/init.insmod.${ro.hardware}.cfg
    class main
    user root
    group root system
    disabled
    oneshot

on property:vendor.mfgapi.touchpanel.permission=1
    chmod 0600 /sys/devices/virtual/sec/tsp/cmd
    chown system system /sys/devices/virtual/sec/tsp/cmd

# WiFi
on post-fs-data
    setprop wifi.direct.interface p2p-dev-wlan0
    setprop wifi.aware.interface aware_nmi0

    # Speaker amp permission
    chmod 644 /mnt/vendor/persist/audio/speaker.cal

    # Allow secure_element group to read / write ST33 SPI state
    chown secure_element secure_element  /sys/class/st33spi/st33spi/st33spi_state
    chmod 0660  /sys/class/st33spi/st33spi/st33spi_state

# Persist
on post-fs-data
    chmod 770 /mnt/vendor/persist/display/hdr_cal_v1
    chmod 770 /mnt/vendor/persist/display/hdr_cal_v2
    chmod 770 /mnt/vendor/persist/display/sdr_cal_v1
    chmod 770 /mnt/vendor/persist/display/sdr_cal_v2
    chown system system /mnt/vendor/persist/sensors/registry/vd6282_spectral_fac_cal.reg
    chmod 600 /mnt/vendor/persist/sensors/registry/vd6282_spectral_fac_cal.reg

# NFC
on property:ro.boot.hardware.revision=PROTO1.0
    setprop persist.vendor.nfc.config_file_name libnfc-hal-st-proto1.conf

on property:ro.boot.hardware.revision=PROTO1.1
    setprop persist.vendor.nfc.config_file_name libnfc-hal-st-proto1.conf

# Bluetooth
on post-fs-data
    chown bluetooth system /proc/bluetooth/timesync
    mkdir /data/vendor/bluetooth 0770 bluetooth system

# SecureElement eSE2 cts mode
on property:persist.vendor.se.ese2.mode=ctsmode
    write /sys/class/st33spi/st33spi/st33spi_state 33

on init && property:ro.boot.hw.soc.rev=0
    setprop vendor.powerhal.config powerhint-a0.json

on property:ro.boot.hardware.revision=PROTO1.0
    setprop vendor.thermal.config "thermal_info_config_proto.json"

on property:ro.boot.hardware.revision=PROTO1.1
    setprop vendor.thermal.config "thermal_info_config_proto.json"

# Haptics
on property:vendor.all.modules.ready=1
    mkdir /mnt/vendor/persist/haptics 0770 system system
    chmod 770 /mnt/vendor/persist/haptics
    chmod 440 /mnt/vendor/persist/haptics/cs40l26.cal
    chown system system /mnt/vendor/persist/haptics
    chown system system /mnt/vendor/persist/haptics/cs40l26.cal

    chown system system /sys/bus/i2c/devices/8-0043/calibration/f0_stored
    chown system system /sys/bus/i2c/devices/8-0043/calibration/q_stored
    chown system system /sys/bus/i2c/devices/8-0043/calibration/redc_stored
    chown system system /sys/bus/i2c/devices/8-0043/default/vibe_state
    chown system system /sys/bus/i2c/devices/8-0043/default/num_waves
    chown system system /sys/bus/i2c/devices/8-0043/default/f0_offset
    chown system system /sys/bus/i2c/devices/8-0043/default/owt_free_space
    chown system system /sys/bus/i2c/devices/8-0043/default/f0_comp_enable
    chown system system /sys/bus/i2c/devices/8-0043/default/redc_comp_enable
    chown system system /sys/bus/i2c/devices/8-0043/default/delay_before_stop_playback_us

    enable vendor.vibrator.cs40l26