device-panther.mk - device/google/pantah - Git at Google

 #
 # Copyright (C) 2021 The Android Open-Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #

 # Restrict the visibility of Android.bp files to improve build analysis time
 $(call inherit-product-if-exists, vendor/google/products/sources_pixel.mk)

 ifdef RELEASE_GOOGLE_PANTHER_RADIO_DIR
 RELEASE_GOOGLE_PRODUCT_RADIO_DIR := $(RELEASE_GOOGLE_PANTHER_RADIO_DIR)
 endif
 RELEASE_GOOGLE_BOOTLOADER_PANTHER_DIR ?= pdk# Keep this for pdk TODO: b/327119000
 RELEASE_GOOGLE_PRODUCT_BOOTLOADER_DIR := bootloader/$(RELEASE_GOOGLE_BOOTLOADER_PANTHER_DIR)
 $(call soong_config_set,pantah_bootloader,prebuilt_dir,$(RELEASE_GOOGLE_BOOTLOADER_PANTHER_DIR))
 ifneq ($(filter trunk%, $(RELEASE_GOOGLE_BOOTLOADER_PANTHER_DIR)),)
 $(call soong_config_set,pantah_fingerprint,prebuilt_dir,trunk)
 else
 $(call soong_config_set,pantah_fingerprint,prebuilt_dir,$(RELEASE_GOOGLE_BOOTLOADER_PANTHER_DIR))
 endif


 TARGET_LINUX_KERNEL_VERSION := $(RELEASE_KERNEL_PANTHER_VERSION)
 # Keeps flexibility for kasan and ufs builds
 TARGET_KERNEL_DIR ?= $(RELEASE_KERNEL_PANTHER_DIR)
 TARGET_BOARD_KERNEL_HEADERS ?= $(RELEASE_KERNEL_PANTHER_DIR)/kernel-headers

 $(call inherit-product-if-exists, vendor/google_devices/pantah/prebuilts/device-vendor-panther.mk)
 $(call inherit-product-if-exists, vendor/google_devices/gs201/prebuilts/device-vendor.mk)
 $(call inherit-product-if-exists, vendor/google_devices/gs201/proprietary/device-vendor.mk)
 $(call inherit-product-if-exists, vendor/google_devices/pantah/proprietary/panther/device-vendor-panther.mk)
 $(call inherit-product-if-exists, vendor/google_devices/panther/proprietary/device-vendor.mk)
 $(call inherit-product-if-exists, vendor/google_devices/pantah/proprietary/WallpapersPanther.mk)

 DEVICE_PACKAGE_OVERLAYS += device/google/pantah/panther/overlay

 include device/google/pantah/audio/panther/audio-tables.mk
 include device/google/gs201/device-shipping-common.mk
 include hardware/google/pixel/vibrator/cs40l26/device.mk
 include device/google/gs-common/bcmbt/bluetooth.mk
 include device/google/gs-common/touch/focaltech/focaltech.mk

 # go/lyric-soong-variables
 $(call soong_config_set,lyric,camera_hardware,panther)
 $(call soong_config_set,lyric,tuning_product,panther)
 $(call soong_config_set,google3a_config,target_device,panther)

 # Init files
 PRODUCT_COPY_FILES += \
 	device/google/pantah/conf/init.pantah.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.pantah.rc \
 	device/google/pantah/conf/init.panther.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.panther.rc

 # Recovery files
 PRODUCT_COPY_FILES += \
         device/google/pantah/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.panther.rc

 # insmod files
 PRODUCT_COPY_FILES += \
 	device/google/pantah/init.insmod.panther.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.panther.cfg

 # MIPI Coex Configs
 PRODUCT_COPY_FILES += \
     device/google/pantah/panther/radio/panther_display_primary_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/display_primary_mipi_coex_table.csv \
     device/google/pantah/panther/radio/panther_camera_front_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_mipi_coex_table.csv \
     device/google/pantah/panther/radio/panther_camera_rear_wide_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_rear_wide_mipi_coex_table.csv \
     device/google/pantah/panther/radio/panther_camera_front_dbr_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_dbr_coex_table.csv

 # Camera
 PRODUCT_COPY_FILES += \
 	device/google/pantah/media_profiles_panther.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml

 # Media Performance Class 13
 PRODUCT_PROPERTY_OVERRIDES += ro.odm.build.media_performance_class=33

 # Display Config
 PRODUCT_COPY_FILES += \
         device/google/pantah/panther/display_colordata_dev_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_dev_cal0.pb \
         device/google/pantah/panther/display_golden_sdc-s6e3fc3-p10_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_sdc-s6e3fc3-p10_cal0.pb

 # Display LBE
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1

 #config of primary display frames to reach LHBM peak brightness
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.primarydisplay.lhbm.frames_to_reach_peak_brightness=2

 # NFC
 PRODUCT_COPY_FILES += \
 	frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
 	frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
 	frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
 	frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
 	frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
 	device/google/pantah/nfc/libnfc-hal-st-proto1.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st-proto1.conf \
 	device/google/pantah/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
     device/google/pantah/nfc/libnfc-nci-panther.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf

 PRODUCT_PACKAGES += \
 	$(RELEASE_PACKAGE_NFC_STACK) \
 	Tag \
 	android.hardware.nfc-service.st \
 	NfcOverlayPanther

 # SecureElement
 PRODUCT_PACKAGES += \
 	android.hardware.secure_element@1.2-service-gto \
 	android.hardware.secure_element@1.2-service-gto-ese2

 PRODUCT_COPY_FILES += \
 	frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
 	frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
 	device/google/pantah/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf \
 	device/google/pantah/nfc/libse-gto-hal2.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal2.conf

 DEVICE_MANIFEST_FILE += \
 	device/google/pantah/nfc/manifest_se.xml

 # Thermal Config
 PRODUCT_COPY_FILES += \
 	device/google/pantah/thermal_info_config_panther.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json \
 	device/google/pantah/thermal_info_config_charge_panther.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_charge.json \
 	device/google/pantah/thermal_info_config_proto.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_proto.json

 # Power HAL config
 PRODUCT_COPY_FILES += \
 	device/google/pantah/powerhint-panther.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json
 PRODUCT_COPY_FILES += \
 	device/google/pantah/powerhint-panther-a0.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint-a0.json

 # Spatial Audio
 PRODUCT_PACKAGES += \
 	libspatialaudio

 # Bluetooth HAL
 PRODUCT_COPY_FILES += \
 	device/google/pantah/bluetooth/bt_vendor_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.bluetooth.a2dp_offload.supported=true \
     persist.bluetooth.a2dp_offload.disabled=false \
     persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac-opus

 # Enable Bluetooth AutoOn feature
 PRODUCT_PRODUCT_PROPERTIES += \
     bluetooth.server.automatic_turn_on=true

 # Bluetooth hci_inject test tool
 PRODUCT_PACKAGES_DEBUG += \
     hci_inject

 # Bluetooth OPUS codec
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.opus.enabled=true

 # Bluetooth Tx power caps
 PRODUCT_COPY_FILES += \
     device/google/pantah/bluetooth/bluetooth_power_limits_panther.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \
     device/google/pantah/bluetooth/bluetooth_power_limits_panther_G03Z5_JP.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_G03Z5_JP.csv \
     device/google/pantah/bluetooth/bluetooth_power_limits_panther_GVU6C_CA.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GVU6C_CA.csv \
     device/google/pantah/bluetooth/bluetooth_power_limits_panther_GQML3_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GQML3_EU.csv \
     device/google/pantah/bluetooth/bluetooth_power_limits_panther_GVU6C_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GVU6C_EU.csv \
     device/google/pantah/bluetooth/bluetooth_power_limits_panther_GQML3_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GQML3_US.csv \
     device/google/pantah/bluetooth/bluetooth_power_limits_panther_GVU6C_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GVU6C_US.csv

 # Bluetooth SAR test tool
 PRODUCT_PACKAGES_DEBUG += \
     sar_test
 # default BDADDR for EVB only
 PRODUCT_PROPERTY_OVERRIDES += \
 	ro.vendor.bluetooth.evb_bdaddr="22:22:22:33:44:55"

 # Bluetooth LE Audio
 PRODUCT_PRODUCT_PROPERTIES += \
     ro.bluetooth.leaudio_offload.supported=true \
     persist.bluetooth.leaudio_offload.disabled=false \
     ro.bluetooth.leaudio_switcher.supported=true \
     bluetooth.profile.bap.unicast.client.enabled?=true \
     bluetooth.profile.csip.set_coordinator.enabled?=true \
     bluetooth.profile.hap.client.enabled?=true \
     bluetooth.profile.mcp.server.enabled?=true \
     bluetooth.profile.ccp.server.enabled?=true \
     bluetooth.profile.vcp.controller.enabled?=true \

 # Bluetooth LE Audio CIS handover to SCO
 # Set the property only if the controller doesn't support CIS and SCO
 # simultaneously. More details in b/242908683.
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.leaudio.notify.idle.during.call=true

 # BT controller not able to support LE Audio dual mic SWB call
 PRODUCT_PRODUCT_PROPERTIES += \
     bluetooth.leaudio.dual_bidirection_swb.supported=false

 # LE Auido Offload Capabilities setting
 PRODUCT_COPY_FILES += \
     device/google/pantah/bluetooth/le_audio_codec_capabilities.xml:$(TARGET_COPY_OUT_VENDOR)/etc/le_audio_codec_capabilities.xml

 # LE Audio Unicast Allowlist
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.leaudio.allow_list=SM-R510,WF-1000XM5

 # Support LE & Classic concurrent encryption (b/330704060)
 PRODUCT_PRODUCT_PROPERTIES += \
     bluetooth.ble.allow_enc_with_bredr=true

 # Bluetooth EWP test tool
 PRODUCT_PACKAGES_DEBUG += \
     ewp_tool

 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.firmware.selection=BCM.hcd

 # Bluetooth AAC VBR
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.a2dp_aac.vbr_supported=true

 # Override BQR mask to enable LE Audio Choppy report, remove BTRT logging
 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.bqr.event_mask=262238
 else
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.bqr.event_mask=94
 endif

 # declare use of spatial audio
 PRODUCT_PROPERTY_OVERRIDES += \
        ro.audio.spatializer_enabled=true

 # optimize spatializer effect
 PRODUCT_PROPERTY_OVERRIDES += \
        audio.spatializer.effect.util_clamp_min=300

 # Keymaster HAL
 #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= [email protected]

 # Gatekeeper HAL
 #LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= [email protected]


 # Gatekeeper
 # PRODUCT_PACKAGES += \
 # 	[email protected]

 # Keymint replaces Keymaster
 # PRODUCT_PACKAGES += \
 # 	android.hardware.security.keymint-service

 # Keymaster
 #PRODUCT_PACKAGES += \
 #	[email protected] \
 #	[email protected]

 #PRODUCT_PACKAGES += [email protected]
 #PRODUCT_PACKAGES += [email protected]
 #LOCAL_KEYMASTER_PRODUCT_PACKAGE := [email protected]
 #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= [email protected]

 # PRODUCT_PROPERTY_OVERRIDES += \
 # 	ro.hardware.keystore_desede=true \
 # 	ro.hardware.keystore=software \
 # 	ro.hardware.gatekeeper=software

 # PowerStats HAL
 PRODUCT_SOONG_NAMESPACES += \
     device/google/pantah/powerstats/panther \
     device/google/pantah

 # Fingerprint HAL
 GOODIX_CONFIG_BUILD_VERSION := g7_trusty
 $(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_common.mk)
 ifeq ($(filter factory%, $(TARGET_PRODUCT)),)
 $(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_shipping.mk)
 else
 $(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_factory.mk)
 endif

 # Display
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.set_idle_timer_ms=1500
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.ignore_hdr_camera_layers=true

 # WiFi Overlay
 PRODUCT_PACKAGES += \
     WifiOverlay2022_P10

 PRODUCT_SOONG_NAMESPACES += device/google/pantah/panther/

 # Trusty liboemcrypto.so
 PRODUCT_SOONG_NAMESPACES += vendor/google_devices/pantah/prebuilts

 # Location
 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
     PRODUCT_COPY_FILES += \
         device/google/pantah/location/lhd.conf.p10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
         device/google/pantah/location/scd.conf.p10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
     ifneq (,$(filter 6.1, $(TARGET_LINUX_KERNEL_VERSION)))
         PRODUCT_COPY_FILES += \
             device/google/pantah/location/gps.6.1.xml.p10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
     else
         PRODUCT_COPY_FILES += \
             device/google/pantah/location/gps.xml.p10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
     endif
 else
     PRODUCT_COPY_FILES += \
         device/google/pantah/location/lhd_user.conf.p10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
         device/google/pantah/location/scd_user.conf.p10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
     ifneq (,$(filter 6.1, $(TARGET_LINUX_KERNEL_VERSION)))
         PRODUCT_COPY_FILES += \
             device/google/pantah/location/gps_user.6.1.xml.p10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
     else
         PRODUCT_COPY_FILES += \
             device/google/pantah/location/gps_user.xml.p10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
     endif
 endif

 # Set support one-handed mode
 PRODUCT_PRODUCT_PROPERTIES += \
     ro.support_one_handed_mode=true

 # Set zram size
 PRODUCT_VENDOR_PROPERTIES += \
 	vendor.zram.size=3g

 # Increment the SVN for any official public releases
 ifdef RELEASE_SVN_PANTHER
 TARGET_SVN ?= $(RELEASE_SVN_PANTHER)
 else
 # Set this for older releases that don't use build flag
 TARGET_SVN ?= 61
 endif

 PRODUCT_VENDOR_PROPERTIES += \
     ro.vendor.build.svn=$(TARGET_SVN)

 # Set device family property for SMR
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.build.device_family=P10C10L10

 # Set build properties for SMR builds
 ifeq ($(RELEASE_IS_SMR), true)
     ifneq (,$(RELEASE_BASE_OS_PANTHER))
         PRODUCT_BASE_OS := $(RELEASE_BASE_OS_PANTHER)
     endif
 endif

 # Set build properties for EMR builds
 ifeq ($(RELEASE_IS_EMR), true)
     ifneq (,$(RELEASE_BASE_OS_PANTHER))
         PRODUCT_PROPERTY_OVERRIDES += \
         ro.build.version.emergency_base_os=$(RELEASE_BASE_OS_PANTHER)
     endif
 endif
 # DCK properties based on target
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.gms.dck.eligible_wcc=2 \
     ro.gms.dck.se_capability=1


 # Set support hide display cutout feature
 PRODUCT_PRODUCT_PROPERTIES += \
     ro.support_hide_display_cutout=true

 PRODUCT_PACKAGES += \
     NoCutoutOverlay \
     AvoidAppsInCutoutOverlay

 # SKU specific RROs
 PRODUCT_PACKAGES += \
     SettingsOverlayG03Z5 \
     SettingsOverlayGQML3 \
     SettingsOverlayGVU6C \
     SettingsOverlayGVU6C_VN

 # userdebug specific
 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
     PRODUCT_COPY_FILES += \
         device/google/gs201/init.hardware.wlc.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.wlc.rc
 endif

 # Fingerprint HAL
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.udfps.als_feed_forward_supported=true \
     persist.vendor.udfps.lhbm_controlled_in_hal_supported=true

 # Vibrator HAL
 $(call soong_config_set,haptics,kernel_ver,v$(subst .,_,$(TARGET_LINUX_KERNEL_VERSION)))
 ACTUATOR_MODEL := luxshare_ict_081545
 ADAPTIVE_HAPTICS_FEATURE := adaptive_haptics_v1
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.vibrator.hal.chirp.enabled=0 \
     ro.vendor.vibrator.hal.device.mass=0.195 \
     ro.vendor.vibrator.hal.loc.coeff=2.65 \
     persist.vendor.vibrator.hal.context.enable=false \
     persist.vendor.vibrator.hal.context.scale=60 \
     persist.vendor.vibrator.hal.context.fade=true \
     persist.vendor.vibrator.hal.context.cooldowntime=1600 \
     persist.vendor.vibrator.hal.context.settlingtime=5000

 # Override Output Distortion Gain
 PRODUCT_VENDOR_PROPERTIES += \
     vendor.audio.hapticgenerator.distortion.output.gain=0.38

 # Keyboard bottom padding in dp for portrait mode and height ratio
 PRODUCT_PRODUCT_PROPERTIES += \
     ro.com.google.ime.kb_pad_port_b=8 \
     ro.com.google.ime.height_ratio=1.075

 # Enable camera exif model/make reporting
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.camera.exif_reveal_make_model=true \
     persist.vendor.camera.front_720P_always_binning=true

 # RKPD
 PRODUCT_PRODUCT_PROPERTIES += \
     remote_provisioning.hostname=remoteprovisioning.googleapis.com \

 ##Audio Vendor property
 PRODUCT_PROPERTY_OVERRIDES += \
 	persist.vendor.audio.cca.enabled=false

 # The default value of this variable is false and should only be set to true when
 # the device allows users to enable the seamless transfer feature.
 PRODUCT_PRODUCT_PROPERTIES += \
    euicc.seamless_transfer_enabled_in_non_qs=true

 # Device features
 PRODUCT_COPY_FILES += \
     frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml

 # Disable Settings large-screen optimization enabled by Window Extensions
 PRODUCT_SYSTEM_PROPERTIES += \
     persist.settings.large_screen_opt.enabled=false

 # Enable DeviceAsWebcam support
 PRODUCT_VENDOR_PROPERTIES += \
     ro.usb.uvc.enabled=true

 # Quick Start device-specific settings
 PRODUCT_PRODUCT_PROPERTIES += \
     ro.quick_start.oem_id=00e0 \
     ro.quick_start.device_id=panther

 # Bluetooth device id
 # Panther: 0x4109
 PRODUCT_PRODUCT_PROPERTIES += \
     bluetooth.device_id.product_id=16649

 # ETM
 ifneq (,$(RELEASE_ETM_IN_USERDEBUG_ENG))
 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
 $(call inherit-product-if-exists, device/google/common/etm/device-userdebug-modules.mk)
 endif
 endif
	#
	# Copyright (C) 2021 The Android Open-Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#

	# Restrict the visibility of Android.bp files to improve build analysis time
	$(call inherit-product-if-exists, vendor/google/products/sources_pixel.mk)

	ifdef RELEASE_GOOGLE_PANTHER_RADIO_DIR
	RELEASE_GOOGLE_PRODUCT_RADIO_DIR := $(RELEASE_GOOGLE_PANTHER_RADIO_DIR)
	endif
	RELEASE_GOOGLE_BOOTLOADER_PANTHER_DIR ?= pdk# Keep this for pdk TODO: b/327119000
	RELEASE_GOOGLE_PRODUCT_BOOTLOADER_DIR := bootloader/$(RELEASE_GOOGLE_BOOTLOADER_PANTHER_DIR)
	$(call soong_config_set,pantah_bootloader,prebuilt_dir,$(RELEASE_GOOGLE_BOOTLOADER_PANTHER_DIR))
	ifneq ($(filter trunk%, $(RELEASE_GOOGLE_BOOTLOADER_PANTHER_DIR)),)
	$(call soong_config_set,pantah_fingerprint,prebuilt_dir,trunk)
	else
	$(call soong_config_set,pantah_fingerprint,prebuilt_dir,$(RELEASE_GOOGLE_BOOTLOADER_PANTHER_DIR))
	endif


	TARGET_LINUX_KERNEL_VERSION := $(RELEASE_KERNEL_PANTHER_VERSION)
	# Keeps flexibility for kasan and ufs builds
	TARGET_KERNEL_DIR ?= $(RELEASE_KERNEL_PANTHER_DIR)
	TARGET_BOARD_KERNEL_HEADERS ?= $(RELEASE_KERNEL_PANTHER_DIR)/kernel-headers

	$(call inherit-product-if-exists, vendor/google_devices/pantah/prebuilts/device-vendor-panther.mk)
	$(call inherit-product-if-exists, vendor/google_devices/gs201/prebuilts/device-vendor.mk)
	$(call inherit-product-if-exists, vendor/google_devices/gs201/proprietary/device-vendor.mk)
	$(call inherit-product-if-exists, vendor/google_devices/pantah/proprietary/panther/device-vendor-panther.mk)
	$(call inherit-product-if-exists, vendor/google_devices/panther/proprietary/device-vendor.mk)
	$(call inherit-product-if-exists, vendor/google_devices/pantah/proprietary/WallpapersPanther.mk)

	DEVICE_PACKAGE_OVERLAYS += device/google/pantah/panther/overlay

	include device/google/pantah/audio/panther/audio-tables.mk
	include device/google/gs201/device-shipping-common.mk
	include hardware/google/pixel/vibrator/cs40l26/device.mk
	include device/google/gs-common/bcmbt/bluetooth.mk
	include device/google/gs-common/touch/focaltech/focaltech.mk

	# go/lyric-soong-variables
	$(call soong_config_set,lyric,camera_hardware,panther)
	$(call soong_config_set,lyric,tuning_product,panther)
	$(call soong_config_set,google3a_config,target_device,panther)

	# Init files
	PRODUCT_COPY_FILES += \
	device/google/pantah/conf/init.pantah.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.pantah.rc \
	device/google/pantah/conf/init.panther.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.panther.rc

	# Recovery files
	PRODUCT_COPY_FILES += \
	device/google/pantah/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.panther.rc

	# insmod files
	PRODUCT_COPY_FILES += \
	device/google/pantah/init.insmod.panther.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.panther.cfg

	# MIPI Coex Configs
	PRODUCT_COPY_FILES += \
	device/google/pantah/panther/radio/panther_display_primary_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/display_primary_mipi_coex_table.csv \
	device/google/pantah/panther/radio/panther_camera_front_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_mipi_coex_table.csv \
	device/google/pantah/panther/radio/panther_camera_rear_wide_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_rear_wide_mipi_coex_table.csv \
	device/google/pantah/panther/radio/panther_camera_front_dbr_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_dbr_coex_table.csv

	# Camera
	PRODUCT_COPY_FILES += \
	device/google/pantah/media_profiles_panther.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml

	# Media Performance Class 13
	PRODUCT_PROPERTY_OVERRIDES += ro.odm.build.media_performance_class=33

	# Display Config
	PRODUCT_COPY_FILES += \
	device/google/pantah/panther/display_colordata_dev_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_dev_cal0.pb \
	device/google/pantah/panther/display_golden_sdc-s6e3fc3-p10_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_sdc-s6e3fc3-p10_cal0.pb

	# Display LBE
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1

	#config of primary display frames to reach LHBM peak brightness
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.primarydisplay.lhbm.frames_to_reach_peak_brightness=2

	# NFC
	PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
	frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
	frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
	frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
	frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
	device/google/pantah/nfc/libnfc-hal-st-proto1.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st-proto1.conf \
	device/google/pantah/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
	device/google/pantah/nfc/libnfc-nci-panther.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf

	PRODUCT_PACKAGES += \
	$(RELEASE_PACKAGE_NFC_STACK) \
	Tag \
	android.hardware.nfc-service.st \
	NfcOverlayPanther

	# SecureElement
	PRODUCT_PACKAGES += \
	android.hardware.secure_element@1.2-service-gto \
	android.hardware.secure_element@1.2-service-gto-ese2

	PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
	frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
	device/google/pantah/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf \
	device/google/pantah/nfc/libse-gto-hal2.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal2.conf

	DEVICE_MANIFEST_FILE += \
	device/google/pantah/nfc/manifest_se.xml

	# Thermal Config
	PRODUCT_COPY_FILES += \
	device/google/pantah/thermal_info_config_panther.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json \
	device/google/pantah/thermal_info_config_charge_panther.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_charge.json \
	device/google/pantah/thermal_info_config_proto.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_proto.json

	# Power HAL config
	PRODUCT_COPY_FILES += \
	device/google/pantah/powerhint-panther.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json
	PRODUCT_COPY_FILES += \
	device/google/pantah/powerhint-panther-a0.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint-a0.json

	# Spatial Audio
	PRODUCT_PACKAGES += \
	libspatialaudio

	# Bluetooth HAL
	PRODUCT_COPY_FILES += \
	device/google/pantah/bluetooth/bt_vendor_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.bluetooth.a2dp_offload.supported=true \
	persist.bluetooth.a2dp_offload.disabled=false \
	persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac-opus

	# Enable Bluetooth AutoOn feature
	PRODUCT_PRODUCT_PROPERTIES += \
	bluetooth.server.automatic_turn_on=true

	# Bluetooth hci_inject test tool
	PRODUCT_PACKAGES_DEBUG += \
	hci_inject

	# Bluetooth OPUS codec
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.opus.enabled=true

	# Bluetooth Tx power caps
	PRODUCT_COPY_FILES += \
	device/google/pantah/bluetooth/bluetooth_power_limits_panther.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \
	device/google/pantah/bluetooth/bluetooth_power_limits_panther_G03Z5_JP.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_G03Z5_JP.csv \
	device/google/pantah/bluetooth/bluetooth_power_limits_panther_GVU6C_CA.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GVU6C_CA.csv \
	device/google/pantah/bluetooth/bluetooth_power_limits_panther_GQML3_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GQML3_EU.csv \
	device/google/pantah/bluetooth/bluetooth_power_limits_panther_GVU6C_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GVU6C_EU.csv \
	device/google/pantah/bluetooth/bluetooth_power_limits_panther_GQML3_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GQML3_US.csv \
	device/google/pantah/bluetooth/bluetooth_power_limits_panther_GVU6C_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GVU6C_US.csv

	# Bluetooth SAR test tool
	PRODUCT_PACKAGES_DEBUG += \
	sar_test
	# default BDADDR for EVB only
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.vendor.bluetooth.evb_bdaddr="22:22:22:33:44:55"

	# Bluetooth LE Audio
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.bluetooth.leaudio_offload.supported=true \
	persist.bluetooth.leaudio_offload.disabled=false \
	ro.bluetooth.leaudio_switcher.supported=true \
	bluetooth.profile.bap.unicast.client.enabled?=true \
	bluetooth.profile.csip.set_coordinator.enabled?=true \
	bluetooth.profile.hap.client.enabled?=true \
	bluetooth.profile.mcp.server.enabled?=true \
	bluetooth.profile.ccp.server.enabled?=true \
	bluetooth.profile.vcp.controller.enabled?=true \

	# Bluetooth LE Audio CIS handover to SCO
	# Set the property only if the controller doesn't support CIS and SCO
	# simultaneously. More details in b/242908683.
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.leaudio.notify.idle.during.call=true

	# BT controller not able to support LE Audio dual mic SWB call
	PRODUCT_PRODUCT_PROPERTIES += \
	bluetooth.leaudio.dual_bidirection_swb.supported=false

	# LE Auido Offload Capabilities setting
	PRODUCT_COPY_FILES += \
	device/google/pantah/bluetooth/le_audio_codec_capabilities.xml:$(TARGET_COPY_OUT_VENDOR)/etc/le_audio_codec_capabilities.xml

	# LE Audio Unicast Allowlist
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.leaudio.allow_list=SM-R510,WF-1000XM5

	# Support LE & Classic concurrent encryption (b/330704060)
	PRODUCT_PRODUCT_PROPERTIES += \
	bluetooth.ble.allow_enc_with_bredr=true

	# Bluetooth EWP test tool
	PRODUCT_PACKAGES_DEBUG += \
	ewp_tool

	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.firmware.selection=BCM.hcd

	# Bluetooth AAC VBR
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.a2dp_aac.vbr_supported=true

	# Override BQR mask to enable LE Audio Choppy report, remove BTRT logging
	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.bqr.event_mask=262238
	else
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.bqr.event_mask=94
	endif

	# declare use of spatial audio
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.audio.spatializer_enabled=true

	# optimize spatializer effect
	PRODUCT_PROPERTY_OVERRIDES += \
	audio.spatializer.effect.util_clamp_min=300

	# Keymaster HAL
	#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= [email protected]

	# Gatekeeper HAL
	#LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= [email protected]


	# Gatekeeper
	# PRODUCT_PACKAGES += \
	# [email protected]

	# Keymint replaces Keymaster
	# PRODUCT_PACKAGES += \
	# android.hardware.security.keymint-service

	# Keymaster
	#PRODUCT_PACKAGES += \
	# [email protected] \
	# [email protected]

	#PRODUCT_PACKAGES += [email protected]
	#PRODUCT_PACKAGES += [email protected]
	#LOCAL_KEYMASTER_PRODUCT_PACKAGE := [email protected]
	#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= [email protected]

	# PRODUCT_PROPERTY_OVERRIDES += \
	# ro.hardware.keystore_desede=true \
	# ro.hardware.keystore=software \
	# ro.hardware.gatekeeper=software

	# PowerStats HAL
	PRODUCT_SOONG_NAMESPACES += \
	device/google/pantah/powerstats/panther \
	device/google/pantah

	# Fingerprint HAL
	GOODIX_CONFIG_BUILD_VERSION := g7_trusty
	$(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_common.mk)
	ifeq ($(filter factory%, $(TARGET_PRODUCT)),)
	$(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_shipping.mk)
	else
	$(call inherit-product-if-exists, vendor/goodix/udfps/configuration/udfps_factory.mk)
	endif

	# Display
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.set_idle_timer_ms=1500
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.ignore_hdr_camera_layers=true

	# WiFi Overlay
	PRODUCT_PACKAGES += \
	WifiOverlay2022_P10

	PRODUCT_SOONG_NAMESPACES += device/google/pantah/panther/

	# Trusty liboemcrypto.so
	PRODUCT_SOONG_NAMESPACES += vendor/google_devices/pantah/prebuilts

	# Location
	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	PRODUCT_COPY_FILES += \
	device/google/pantah/location/lhd.conf.p10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
	device/google/pantah/location/scd.conf.p10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
	ifneq (,$(filter 6.1, $(TARGET_LINUX_KERNEL_VERSION)))
	PRODUCT_COPY_FILES += \
	device/google/pantah/location/gps.6.1.xml.p10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
	else
	PRODUCT_COPY_FILES += \
	device/google/pantah/location/gps.xml.p10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
	endif
	else
	PRODUCT_COPY_FILES += \
	device/google/pantah/location/lhd_user.conf.p10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
	device/google/pantah/location/scd_user.conf.p10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
	ifneq (,$(filter 6.1, $(TARGET_LINUX_KERNEL_VERSION)))
	PRODUCT_COPY_FILES += \
	device/google/pantah/location/gps_user.6.1.xml.p10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
	else
	PRODUCT_COPY_FILES += \
	device/google/pantah/location/gps_user.xml.p10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
	endif
	endif

	# Set support one-handed mode
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.support_one_handed_mode=true

	# Set zram size
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.zram.size=3g

	# Increment the SVN for any official public releases
	ifdef RELEASE_SVN_PANTHER
	TARGET_SVN ?= $(RELEASE_SVN_PANTHER)
	else
	# Set this for older releases that don't use build flag
	TARGET_SVN ?= 61
	endif

	PRODUCT_VENDOR_PROPERTIES += \
	ro.vendor.build.svn=$(TARGET_SVN)

	# Set device family property for SMR
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.build.device_family=P10C10L10

	# Set build properties for SMR builds
	ifeq ($(RELEASE_IS_SMR), true)
	ifneq (,$(RELEASE_BASE_OS_PANTHER))
	PRODUCT_BASE_OS := $(RELEASE_BASE_OS_PANTHER)
	endif
	endif

	# Set build properties for EMR builds
	ifeq ($(RELEASE_IS_EMR), true)
	ifneq (,$(RELEASE_BASE_OS_PANTHER))
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.build.version.emergency_base_os=$(RELEASE_BASE_OS_PANTHER)
	endif
	endif
	# DCK properties based on target
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.gms.dck.eligible_wcc=2 \
	ro.gms.dck.se_capability=1


	# Set support hide display cutout feature
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.support_hide_display_cutout=true

	PRODUCT_PACKAGES += \
	NoCutoutOverlay \
	AvoidAppsInCutoutOverlay

	# SKU specific RROs
	PRODUCT_PACKAGES += \
	SettingsOverlayG03Z5 \
	SettingsOverlayGQML3 \
	SettingsOverlayGVU6C \
	SettingsOverlayGVU6C_VN

	# userdebug specific
	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	PRODUCT_COPY_FILES += \
	device/google/gs201/init.hardware.wlc.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.wlc.rc
	endif

	# Fingerprint HAL
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.udfps.als_feed_forward_supported=true \
	persist.vendor.udfps.lhbm_controlled_in_hal_supported=true

	# Vibrator HAL
	$(call soong_config_set,haptics,kernel_ver,v$(subst .,_,$(TARGET_LINUX_KERNEL_VERSION)))
	ACTUATOR_MODEL := luxshare_ict_081545
	ADAPTIVE_HAPTICS_FEATURE := adaptive_haptics_v1
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.vibrator.hal.chirp.enabled=0 \
	ro.vendor.vibrator.hal.device.mass=0.195 \
	ro.vendor.vibrator.hal.loc.coeff=2.65 \
	persist.vendor.vibrator.hal.context.enable=false \
	persist.vendor.vibrator.hal.context.scale=60 \
	persist.vendor.vibrator.hal.context.fade=true \
	persist.vendor.vibrator.hal.context.cooldowntime=1600 \
	persist.vendor.vibrator.hal.context.settlingtime=5000

	# Override Output Distortion Gain
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.audio.hapticgenerator.distortion.output.gain=0.38

	# Keyboard bottom padding in dp for portrait mode and height ratio
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.com.google.ime.kb_pad_port_b=8 \
	ro.com.google.ime.height_ratio=1.075

	# Enable camera exif model/make reporting
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.camera.exif_reveal_make_model=true \
	persist.vendor.camera.front_720P_always_binning=true

	# RKPD
	PRODUCT_PRODUCT_PROPERTIES += \
	remote_provisioning.hostname=remoteprovisioning.googleapis.com \

	##Audio Vendor property
	PRODUCT_PROPERTY_OVERRIDES += \
	persist.vendor.audio.cca.enabled=false

	# The default value of this variable is false and should only be set to true when
	# the device allows users to enable the seamless transfer feature.
	PRODUCT_PRODUCT_PROPERTIES += \
	euicc.seamless_transfer_enabled_in_non_qs=true

	# Device features
	PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml

	# Disable Settings large-screen optimization enabled by Window Extensions
	PRODUCT_SYSTEM_PROPERTIES += \
	persist.settings.large_screen_opt.enabled=false

	# Enable DeviceAsWebcam support
	PRODUCT_VENDOR_PROPERTIES += \
	ro.usb.uvc.enabled=true

	# Quick Start device-specific settings
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.quick_start.oem_id=00e0 \
	ro.quick_start.device_id=panther

	# Bluetooth device id
	# Panther: 0x4109
	PRODUCT_PRODUCT_PROPERTIES += \
	bluetooth.device_id.product_id=16649

	# ETM
	ifneq (,$(RELEASE_ETM_IN_USERDEBUG_ENG))
	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	$(call inherit-product-if-exists, device/google/common/etm/device-userdebug-modules.mk)
	endif
	endif