device-husky.mk - device/google/shusky - Git at Google

 #
 # Copyright (C) 2021 The Android Open-Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #

 TARGET_KERNEL_DIR ?= device/google/shusky-kernel
 TARGET_BOARD_KERNEL_HEADERS := device/google/shusky-kernel/kernel-headers

 LOCAL_PATH := device/google/shusky

 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
     USE_UWBFIELDTESTQM := true
 endif

 $(call inherit-product-if-exists, vendor/google_devices/shusky/prebuilts/device-vendor-husky.mk)
 $(call inherit-product-if-exists, vendor/google_devices/zuma/prebuilts/device-vendor.mk)
 $(call inherit-product-if-exists, vendor/google_devices/zuma/proprietary/device-vendor.mk)
 $(call inherit-product-if-exists, vendor/google_devices/shusky/proprietary/husky/device-vendor-husky.mk)
 $(call inherit-product-if-exists, vendor/google_devices/husky/proprietary/device-vendor.mk)
 $(call inherit-product-if-exists, vendor/qorvo/uwb/qm35-hal/Device.mk)
 $(call inherit-product-if-exists, vendor/google_devices/shusky/proprietary/WallpapersHusky.mk)

 # display
 DEVICE_PACKAGE_OVERLAYS += device/google/shusky/husky/overlay
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.ignore_hdr_camera_layers=true

 PRODUCT_COPY_FILES += \
 	device/google/shusky/husky/display_colordata_dev_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_dev_cal0.pb \
     device/google/shusky/husky/display_golden_google-hk3_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_google-hk3_cal0.pb

 include device/google/shusky/audio/husky/audio-tables.mk
 include device/google/zuma/device-shipping-common.mk
 include hardware/google/pixel/vibrator/cs40l26/device.mk
 include device/google/gs-common/bcmbt/bluetooth.mk
 include device/google/gs-common/touch/stm/stm20.mk
 include device/google/gs-common/touch/gti/gti.mk
 include device/google/gs-common/touch/touchinspector/touchinspector.mk

 # go/lyric-soong-variables
 $(call soong_config_set,lyric,camera_hardware,husky)
 $(call soong_config_set,lyric,tuning_product,husky)
 $(call soong_config_set,google3a_config,target_device,husky)

 # Init files
 PRODUCT_COPY_FILES += \
 	device/google/shusky/conf/init.husky.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.husky.rc

 # Recovery files
 PRODUCT_COPY_FILES += \
         device/google/shusky/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.husky.rc

 # MIPI Coex Configs
 PRODUCT_COPY_FILES += \
         device/google/shusky/husky/radio/husky_camera_front_dbr_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_dbr_coex_table.csv \
         device/google/shusky/husky/radio/husky_camera_front_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_mipi_coex_table.csv \
         device/google/shusky/husky/radio/husky_camera_rear_tele_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_rear_tele_mipi_coex_table.csv \
         device/google/shusky/husky/radio/husky_display_primary_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/display_primary_mipi_coex_table.csv

 # Camera
 PRODUCT_COPY_FILES += \
 	device/google/shusky/media_profiles_husky.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml

 # NFC
 PRODUCT_COPY_FILES += \
 	frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
 	frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
 	frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
 	frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
 	frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
 	device/google/shusky/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
 	device/google/shusky/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf

 PRODUCT_PACKAGES += \
 	NfcNci \
 	Tag \
 	android.hardware.nfc-service.st

 # SecureElement
 PRODUCT_PACKAGES += \
 	android.hardware.secure_element-service.thales

 PRODUCT_COPY_FILES += \
 	frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
 	frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
 	device/google/shusky/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf

 # Bluetooth HAL
 PRODUCT_COPY_FILES += \
 	device/google/shusky/bluetooth/bt_vendor_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.bluetooth.a2dp_offload.supported=true \
     persist.bluetooth.a2dp_offload.disabled=false \
     persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac-opus

 # Bluetooth Tx power caps
 PRODUCT_COPY_FILES += \
     $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \
     $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_CA.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_CA.csv \
     $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_EU.csv \
     $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_JP.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_JP.csv \
     $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_US.csv \
     $(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_GC3VE_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GC3VE_EU.csv

 # POF
 PRODUCT_PRODUCT_PROPERTIES += \
     ro.bluetooth.finder.supported=true

 # Spatial Audio
 PRODUCT_PACKAGES += \
 	libspatialaudio

 # declare use of spatial audio
 PRODUCT_PROPERTY_OVERRIDES += \
        ro.audio.spatializer_enabled=true

 # Audio CCA property
 PRODUCT_PROPERTY_OVERRIDES += \
 	persist.vendor.audio.cca.enabled=false

 # DCK properties based on target
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.gms.dck.eligible_wcc=3 \
     ro.gms.dck.se_capability=1

 # Bluetooth hci_inject test tool
 PRODUCT_PACKAGES_DEBUG += \
     hci_inject

 # Bluetooth OPUS codec
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.opus.enabled=true

 # Bluetooth SAR test tool
 PRODUCT_PACKAGES_DEBUG += \
     sar_test

 # Bluetooth EWP test tool
 PRODUCT_PACKAGES_DEBUG += \
     ewp_tool

 # Bluetooth AAC VBR
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.a2dp_aac.vbr_supported=true

 # Override BQR mask to enable LE Audio Choppy report, remove BTRT logging
 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.bqr.event_mask=295006 \
     persist.bluetooth.bqr.vnd_quality_mask=29 \
     persist.bluetooth.bqr.vnd_trace_mask=0 \
     persist.bluetooth.vendor.btsnoop=true
 else
 PRODUCT_PRODUCT_PROPERTIES += \
     persist.bluetooth.bqr.event_mask=295006 \
     persist.bluetooth.bqr.vnd_quality_mask=16 \
     persist.bluetooth.bqr.vnd_trace_mask=0 \
     persist.bluetooth.vendor.btsnoop=false
 endif

 # Spatial Audio
 PRODUCT_PACKAGES += \
 	libspatialaudio \
 	librondo

 # Bluetooth Super Wide Band
 PRODUCT_PRODUCT_PROPERTIES += \
 	bluetooth.hfp.swb.supported=true

 # Bluetooth LE Audio
 PRODUCT_PRODUCT_PROPERTIES += \
 	ro.bluetooth.leaudio_switcher.supported=true \
 	bluetooth.profile.bap.unicast.client.enabled=true \
 	bluetooth.profile.csip.set_coordinator.enabled=true \
 	bluetooth.profile.hap.client.enabled=true \
 	bluetooth.profile.mcp.server.enabled=true \
 	bluetooth.profile.ccp.server.enabled=true \
 	bluetooth.profile.vcp.controller.enabled=true

 # Bluetooth LE Audio enable hardware offloading
 PRODUCT_PRODUCT_PROPERTIES += \
 	ro.bluetooth.leaudio_offload.supported=true \
 	persist.bluetooth.leaudio_offload.disabled=false

 # Bluetooth LE Auido offload capabilities setting
 PRODUCT_COPY_FILES += \
 	device/google/shusky/bluetooth/le_audio_codec_capabilities.xml:$(TARGET_COPY_OUT_VENDOR)/etc/le_audio_codec_capabilities.xml

 # Bluetooth LE Audio CIS handover to SCO
 # Set the property only for the controller couldn't support CIS/SCO simultaneously. More detailed in b/242908683.
 PRODUCT_PRODUCT_PROPERTIES += \
 	persist.bluetooth.leaudio.notify.idle.during.call=true

 # Not support LE Audio dual mic SWB call based on the current launch strategy
 PRODUCT_PRODUCT_PROPERTIES += \
     bluetooth.leaudio.dual_bidirection_swb.supported=false

 # Support One-Handed mode
 PRODUCT_PRODUCT_PROPERTIES += \
     ro.support_one_handed_mode=true

 # Keymaster HAL
 #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= [email protected]

 # Gatekeeper HAL
 #LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= [email protected]


 # Gatekeeper
 # PRODUCT_PACKAGES += \
 # 	[email protected]

 # Keymint replaces Keymaster
 # PRODUCT_PACKAGES += \
 # 	android.hardware.security.keymint-service

 # Keymaster
 #PRODUCT_PACKAGES += \
 #	[email protected] \
 #	[email protected]

 #PRODUCT_PACKAGES += [email protected]
 #PRODUCT_PACKAGES += [email protected]
 #LOCAL_KEYMASTER_PRODUCT_PACKAGE := [email protected]
 #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= [email protected]

 # PRODUCT_PROPERTY_OVERRIDES += \
 # 	ro.hardware.keystore_desede=true \
 # 	ro.hardware.keystore=software \
 # 	ro.hardware.gatekeeper=software

 # PowerStats HAL
 PRODUCT_SOONG_NAMESPACES += \
     device/google/shusky/powerstats/husky \
     device/google/shusky

 # WiFi Overlay
 PRODUCT_PACKAGES += \
 	UwbOverlayHK3 \
 	WifiOverlay2023 \
 	PixelWifiOverlay2023

 # Trusty liboemcrypto.so
 PRODUCT_SOONG_NAMESPACES += vendor/google_devices/shusky/prebuilts

 # Location
 # SDK build system
 include device/google/gs-common/gps/brcm/device.mk

 PRODUCT_COPY_FILES += \
        device/google/shusky/location/gps.cer:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.cer

 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
         PRODUCT_COPY_FILES += \
             device/google/shusky/location/lhd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
             device/google/shusky/location/scd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf \
             device/google/shusky/location/gps.xml.hk3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
 else
         PRODUCT_COPY_FILES += \
             device/google/shusky/location/lhd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
             device/google/shusky/location/scd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf \
             device/google/shusky/location/gps_user.xml.hk3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
 endif

 # Set zram size
 PRODUCT_VENDOR_PROPERTIES += \
 	vendor.zram.size=50p \
 	persist.device_config.configuration.disable_rescue_party=true

 # Fingerprint HAL
 GOODIX_CONFIG_BUILD_VERSION := g7_trusty
 include device/google/gs101/fingerprint/udfps_common.mk
 ifeq ($(filter factory%, $(TARGET_PRODUCT)),)
 include device/google/gs101/fingerprint/udfps_shipping.mk
 else
 include device/google/gs101/fingerprint/udfps_factory.mk
 endif

 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.udfps.als_feed_forward_supported=true \
     persist.vendor.udfps.lhbm_controlled_in_hal_supported=true

 # Fingerprint exposure compensation
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.udfps.auto_exposure_compensation_supported=true

 # Camera Vendor property
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.camera.front_720P_always_binning=true

 # Media Performance Class 14
 PRODUCT_PRODUCT_PROPERTIES += ro.odm.build.media_performance_class=33

 # config of display brightness dimming
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.0.brightness.dimming.usage?=1
 PRODUCT_VENDOR_PROPERTIES += \
     vendor.primarydisplay.op.hs_hz=120 \
     vendor.primarydisplay.op.ns_hz=60 \
     vendor.primarydisplay.op.ns_min_dbv=1172

 # kernel idle timer for display driver
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.support_kernel_idle_timer=true

 # lhbm peak brightness delay: decided by kernel
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.primarydisplay.lhbm.frames_to_reach_peak_brightness=0

 # Display LBE
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1

 # blocking zone for min idle refresh rate
 PRODUCT_VENDOR_PROPERTIES += \
     vendor.primarydisplay.min_idle_refresh_rate.default=1 \
     vendor.primarydisplay.min_idle_refresh_rate.blocking_zone=10 \
     vendor.primarydisplay.min_idle_refresh_rate.blocking_zone_dbv=492

 # Display ACL
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.0.brightness.acl.default=0

 # display color data
 PRODUCT_COPY_FILES += \
 	device/google/shusky/husky/panel_config_google-hk3_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/panel_config_google-hk3_cal0.pb

 # Vibrator HAL
 ACTUATOR_MODEL := luxshare_ict_081545
 ADAPTIVE_HAPTICS_FEATURE := adaptive_haptics_v1
 PRODUCT_VENDOR_PROPERTIES += \
     ro.vendor.vibrator.hal.chirp.enabled=0 \
     ro.vendor.vibrator.hal.device.mass=0.222 \
     ro.vendor.vibrator.hal.loc.coeff=2.8 \
     persist.vendor.vibrator.hal.context.enable=false \
     persist.vendor.vibrator.hal.context.scale=60 \
     persist.vendor.vibrator.hal.context.fade=true \
     persist.vendor.vibrator.hal.context.cooldowntime=1600 \
     persist.vendor.vibrator.hal.context.settlingtime=5000 \
     ro.vendor.vibrator.hal.dbc.enable=true \
     ro.vendor.vibrator.hal.dbc.envrelcoef=8353728 \
     ro.vendor.vibrator.hal.dbc.riseheadroom=1909602 \
     ro.vendor.vibrator.hal.dbc.fallheadroom=1909602 \
     ro.vendor.vibrator.hal.dbc.txlvlthreshfs=2516583 \
     ro.vendor.vibrator.hal.dbc.txlvlholdoffms=0 \
     ro.vendor.vibrator.hal.pm.activetimeout=5

 # Increment the SVN for any official public releases
 PRODUCT_VENDOR_PROPERTIES += \
     ro.vendor.build.svn=11

 # WLC userdebug specific
 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
     PRODUCT_COPY_FILES += \
         device/google/zuma/init.hardware.wlc.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.wlc.rc
 endif

 # Setup Wizard device-specific settings
 PRODUCT_PRODUCT_PROPERTIES += \
     setupwizard.feature.enable_quick_start_flow=true \

 # Quick Start device-specific settings
 PRODUCT_PRODUCT_PROPERTIES += \
     ro.quick_start.oem_id=00e0 \
     ro.quick_start.device_id=husky

 # PKVM Memory Reclaim
 PRODUCT_VENDOR_PROPERTIES += \
     hypervisor.memory_reclaim.supported=1

 # P23 Devices no longer need rlsservice
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.camera.rls_supported=false

 # Settings Overlay
 PRODUCT_PACKAGES += \
     SettingsHuskyOverlay

 # Display RRS default Config
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += persist.vendor.display.primary.boot_config=1008x2244@120
 # TODO: b/250788756 - the property will be phased out after HWC loads user-preferred mode
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.preferred_mode=1008x2244@120

 # Window Extensions
 $(call inherit-product, $(SRC_TARGET_DIR)/product/window_extensions.mk)

 # Disable Settings large-screen optimization enabled by Window Extensions
 PRODUCT_SYSTEM_PROPERTIES += \
     persist.settings.large_screen_opt.enabled=false

 # Keyboard height ratio and bottom padding in dp for portrait mode
 PRODUCT_PRODUCT_PROPERTIES += \
          ro.com.google.ime.kb_pad_port_b=10.4 \
          ro.com.google.ime.height_ratio=1.0

 # Enable camera exif model/make reporting
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.camera.exif_reveal_make_model=true

 # Enable DeviceAsWebcam support
 PRODUCT_VENDOR_PROPERTIES += \
     ro.usb.uvc.enabled=true

 # DisplayPort should be disabled by default (b/300167292)
 PRODUCT_VENDOR_PROPERTIES += \
        persist.vendor.usb.displayport.enabled=0
	#
	# Copyright (C) 2021 The Android Open-Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#

	TARGET_KERNEL_DIR ?= device/google/shusky-kernel
	TARGET_BOARD_KERNEL_HEADERS := device/google/shusky-kernel/kernel-headers

	LOCAL_PATH := device/google/shusky

	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	USE_UWBFIELDTESTQM := true
	endif

	$(call inherit-product-if-exists, vendor/google_devices/shusky/prebuilts/device-vendor-husky.mk)
	$(call inherit-product-if-exists, vendor/google_devices/zuma/prebuilts/device-vendor.mk)
	$(call inherit-product-if-exists, vendor/google_devices/zuma/proprietary/device-vendor.mk)
	$(call inherit-product-if-exists, vendor/google_devices/shusky/proprietary/husky/device-vendor-husky.mk)
	$(call inherit-product-if-exists, vendor/google_devices/husky/proprietary/device-vendor.mk)
	$(call inherit-product-if-exists, vendor/qorvo/uwb/qm35-hal/Device.mk)
	$(call inherit-product-if-exists, vendor/google_devices/shusky/proprietary/WallpapersHusky.mk)

	# display
	DEVICE_PACKAGE_OVERLAYS += device/google/shusky/husky/overlay
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.ignore_hdr_camera_layers=true

	PRODUCT_COPY_FILES += \
	device/google/shusky/husky/display_colordata_dev_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_dev_cal0.pb \
	device/google/shusky/husky/display_golden_google-hk3_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_golden_google-hk3_cal0.pb

	include device/google/shusky/audio/husky/audio-tables.mk
	include device/google/zuma/device-shipping-common.mk
	include hardware/google/pixel/vibrator/cs40l26/device.mk
	include device/google/gs-common/bcmbt/bluetooth.mk
	include device/google/gs-common/touch/stm/stm20.mk
	include device/google/gs-common/touch/gti/gti.mk
	include device/google/gs-common/touch/touchinspector/touchinspector.mk

	# go/lyric-soong-variables
	$(call soong_config_set,lyric,camera_hardware,husky)
	$(call soong_config_set,lyric,tuning_product,husky)
	$(call soong_config_set,google3a_config,target_device,husky)

	# Init files
	PRODUCT_COPY_FILES += \
	device/google/shusky/conf/init.husky.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.husky.rc

	# Recovery files
	PRODUCT_COPY_FILES += \
	device/google/shusky/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.husky.rc

	# MIPI Coex Configs
	PRODUCT_COPY_FILES += \
	device/google/shusky/husky/radio/husky_camera_front_dbr_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_dbr_coex_table.csv \
	device/google/shusky/husky/radio/husky_camera_front_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_front_mipi_coex_table.csv \
	device/google/shusky/husky/radio/husky_camera_rear_tele_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/camera_rear_tele_mipi_coex_table.csv \
	device/google/shusky/husky/radio/husky_display_primary_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/display_primary_mipi_coex_table.csv

	# Camera
	PRODUCT_COPY_FILES += \
	device/google/shusky/media_profiles_husky.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml

	# NFC
	PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
	frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
	frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
	frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
	frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
	device/google/shusky/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
	device/google/shusky/nfc/libnfc-nci.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf

	PRODUCT_PACKAGES += \
	NfcNci \
	Tag \
	android.hardware.nfc-service.st

	# SecureElement
	PRODUCT_PACKAGES += \
	android.hardware.secure_element-service.thales

	PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
	frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
	device/google/shusky/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf

	# Bluetooth HAL
	PRODUCT_COPY_FILES += \
	device/google/shusky/bluetooth/bt_vendor_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth/bt_vendor_overlay.conf
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.bluetooth.a2dp_offload.supported=true \
	persist.bluetooth.a2dp_offload.disabled=false \
	persist.bluetooth.a2dp_offload.cap=sbc-aac-aptx-aptxhd-ldac-opus

	# Bluetooth Tx power caps
	PRODUCT_COPY_FILES += \
	$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits.csv \
	$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_CA.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_CA.csv \
	$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_EU.csv \
	$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_JP.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_JP.csv \
	$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_US.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_US.csv \
	$(LOCAL_PATH)/bluetooth/bluetooth_power_limits_husky_GC3VE_EU.csv:$(TARGET_COPY_OUT_VENDOR)/etc/bluetooth_power_limits_GC3VE_EU.csv

	# POF
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.bluetooth.finder.supported=true

	# Spatial Audio
	PRODUCT_PACKAGES += \
	libspatialaudio

	# declare use of spatial audio
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.audio.spatializer_enabled=true

	# Audio CCA property
	PRODUCT_PROPERTY_OVERRIDES += \
	persist.vendor.audio.cca.enabled=false

	# DCK properties based on target
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.gms.dck.eligible_wcc=3 \
	ro.gms.dck.se_capability=1

	# Bluetooth hci_inject test tool
	PRODUCT_PACKAGES_DEBUG += \
	hci_inject

	# Bluetooth OPUS codec
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.opus.enabled=true

	# Bluetooth SAR test tool
	PRODUCT_PACKAGES_DEBUG += \
	sar_test

	# Bluetooth EWP test tool
	PRODUCT_PACKAGES_DEBUG += \
	ewp_tool

	# Bluetooth AAC VBR
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.a2dp_aac.vbr_supported=true

	# Override BQR mask to enable LE Audio Choppy report, remove BTRT logging
	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.bqr.event_mask=295006 \
	persist.bluetooth.bqr.vnd_quality_mask=29 \
	persist.bluetooth.bqr.vnd_trace_mask=0 \
	persist.bluetooth.vendor.btsnoop=true
	else
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.bqr.event_mask=295006 \
	persist.bluetooth.bqr.vnd_quality_mask=16 \
	persist.bluetooth.bqr.vnd_trace_mask=0 \
	persist.bluetooth.vendor.btsnoop=false
	endif

	# Spatial Audio
	PRODUCT_PACKAGES += \
	libspatialaudio \
	librondo

	# Bluetooth Super Wide Band
	PRODUCT_PRODUCT_PROPERTIES += \
	bluetooth.hfp.swb.supported=true

	# Bluetooth LE Audio
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.bluetooth.leaudio_switcher.supported=true \
	bluetooth.profile.bap.unicast.client.enabled=true \
	bluetooth.profile.csip.set_coordinator.enabled=true \
	bluetooth.profile.hap.client.enabled=true \
	bluetooth.profile.mcp.server.enabled=true \
	bluetooth.profile.ccp.server.enabled=true \
	bluetooth.profile.vcp.controller.enabled=true

	# Bluetooth LE Audio enable hardware offloading
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.bluetooth.leaudio_offload.supported=true \
	persist.bluetooth.leaudio_offload.disabled=false

	# Bluetooth LE Auido offload capabilities setting
	PRODUCT_COPY_FILES += \
	device/google/shusky/bluetooth/le_audio_codec_capabilities.xml:$(TARGET_COPY_OUT_VENDOR)/etc/le_audio_codec_capabilities.xml

	# Bluetooth LE Audio CIS handover to SCO
	# Set the property only for the controller couldn't support CIS/SCO simultaneously. More detailed in b/242908683.
	PRODUCT_PRODUCT_PROPERTIES += \
	persist.bluetooth.leaudio.notify.idle.during.call=true

	# Not support LE Audio dual mic SWB call based on the current launch strategy
	PRODUCT_PRODUCT_PROPERTIES += \
	bluetooth.leaudio.dual_bidirection_swb.supported=false

	# Support One-Handed mode
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.support_one_handed_mode=true

	# Keymaster HAL
	#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= [email protected]

	# Gatekeeper HAL
	#LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= [email protected]


	# Gatekeeper
	# PRODUCT_PACKAGES += \
	# [email protected]

	# Keymint replaces Keymaster
	# PRODUCT_PACKAGES += \
	# android.hardware.security.keymint-service

	# Keymaster
	#PRODUCT_PACKAGES += \
	# [email protected] \
	# [email protected]

	#PRODUCT_PACKAGES += [email protected]
	#PRODUCT_PACKAGES += [email protected]
	#LOCAL_KEYMASTER_PRODUCT_PACKAGE := [email protected]
	#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= [email protected]

	# PRODUCT_PROPERTY_OVERRIDES += \
	# ro.hardware.keystore_desede=true \
	# ro.hardware.keystore=software \
	# ro.hardware.gatekeeper=software

	# PowerStats HAL
	PRODUCT_SOONG_NAMESPACES += \
	device/google/shusky/powerstats/husky \
	device/google/shusky

	# WiFi Overlay
	PRODUCT_PACKAGES += \
	UwbOverlayHK3 \
	WifiOverlay2023 \
	PixelWifiOverlay2023

	# Trusty liboemcrypto.so
	PRODUCT_SOONG_NAMESPACES += vendor/google_devices/shusky/prebuilts

	# Location
	# SDK build system
	include device/google/gs-common/gps/brcm/device.mk

	PRODUCT_COPY_FILES += \
	device/google/shusky/location/gps.cer:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.cer

	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	PRODUCT_COPY_FILES += \
	device/google/shusky/location/lhd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
	device/google/shusky/location/scd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf \
	device/google/shusky/location/gps.xml.hk3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
	else
	PRODUCT_COPY_FILES += \
	device/google/shusky/location/lhd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
	device/google/shusky/location/scd_user.conf:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf \
	device/google/shusky/location/gps_user.xml.hk3:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml
	endif

	# Set zram size
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.zram.size=50p \
	persist.device_config.configuration.disable_rescue_party=true

	# Fingerprint HAL
	GOODIX_CONFIG_BUILD_VERSION := g7_trusty
	include device/google/gs101/fingerprint/udfps_common.mk
	ifeq ($(filter factory%, $(TARGET_PRODUCT)),)
	include device/google/gs101/fingerprint/udfps_shipping.mk
	else
	include device/google/gs101/fingerprint/udfps_factory.mk
	endif

	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.udfps.als_feed_forward_supported=true \
	persist.vendor.udfps.lhbm_controlled_in_hal_supported=true

	# Fingerprint exposure compensation
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.udfps.auto_exposure_compensation_supported=true

	# Camera Vendor property
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.camera.front_720P_always_binning=true

	# Media Performance Class 14
	PRODUCT_PRODUCT_PROPERTIES += ro.odm.build.media_performance_class=33

	# config of display brightness dimming
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.0.brightness.dimming.usage?=1
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.primarydisplay.op.hs_hz=120 \
	vendor.primarydisplay.op.ns_hz=60 \
	vendor.primarydisplay.op.ns_min_dbv=1172

	# kernel idle timer for display driver
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.support_kernel_idle_timer=true

	# lhbm peak brightness delay: decided by kernel
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.primarydisplay.lhbm.frames_to_reach_peak_brightness=0

	# Display LBE
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1

	# blocking zone for min idle refresh rate
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.primarydisplay.min_idle_refresh_rate.default=1 \
	vendor.primarydisplay.min_idle_refresh_rate.blocking_zone=10 \
	vendor.primarydisplay.min_idle_refresh_rate.blocking_zone_dbv=492

	# Display ACL
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.0.brightness.acl.default=0

	# display color data
	PRODUCT_COPY_FILES += \
	device/google/shusky/husky/panel_config_google-hk3_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/panel_config_google-hk3_cal0.pb

	# Vibrator HAL
	ACTUATOR_MODEL := luxshare_ict_081545
	ADAPTIVE_HAPTICS_FEATURE := adaptive_haptics_v1
	PRODUCT_VENDOR_PROPERTIES += \
	ro.vendor.vibrator.hal.chirp.enabled=0 \
	ro.vendor.vibrator.hal.device.mass=0.222 \
	ro.vendor.vibrator.hal.loc.coeff=2.8 \
	persist.vendor.vibrator.hal.context.enable=false \
	persist.vendor.vibrator.hal.context.scale=60 \
	persist.vendor.vibrator.hal.context.fade=true \
	persist.vendor.vibrator.hal.context.cooldowntime=1600 \
	persist.vendor.vibrator.hal.context.settlingtime=5000 \
	ro.vendor.vibrator.hal.dbc.enable=true \
	ro.vendor.vibrator.hal.dbc.envrelcoef=8353728 \
	ro.vendor.vibrator.hal.dbc.riseheadroom=1909602 \
	ro.vendor.vibrator.hal.dbc.fallheadroom=1909602 \
	ro.vendor.vibrator.hal.dbc.txlvlthreshfs=2516583 \
	ro.vendor.vibrator.hal.dbc.txlvlholdoffms=0 \
	ro.vendor.vibrator.hal.pm.activetimeout=5

	# Increment the SVN for any official public releases
	PRODUCT_VENDOR_PROPERTIES += \
	ro.vendor.build.svn=11

	# WLC userdebug specific
	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	PRODUCT_COPY_FILES += \
	device/google/zuma/init.hardware.wlc.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.wlc.rc
	endif

	# Setup Wizard device-specific settings
	PRODUCT_PRODUCT_PROPERTIES += \
	setupwizard.feature.enable_quick_start_flow=true \

	# Quick Start device-specific settings
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.quick_start.oem_id=00e0 \
	ro.quick_start.device_id=husky

	# PKVM Memory Reclaim
	PRODUCT_VENDOR_PROPERTIES += \
	hypervisor.memory_reclaim.supported=1

	# P23 Devices no longer need rlsservice
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.camera.rls_supported=false

	# Settings Overlay
	PRODUCT_PACKAGES += \
	SettingsHuskyOverlay

	# Display RRS default Config
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += persist.vendor.display.primary.boot_config=1008x2244@120
	# TODO: b/250788756 - the property will be phased out after HWC loads user-preferred mode
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.preferred_mode=1008x2244@120

	# Window Extensions
	$(call inherit-product, $(SRC_TARGET_DIR)/product/window_extensions.mk)

	# Disable Settings large-screen optimization enabled by Window Extensions
	PRODUCT_SYSTEM_PROPERTIES += \
	persist.settings.large_screen_opt.enabled=false

	# Keyboard height ratio and bottom padding in dp for portrait mode
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.com.google.ime.kb_pad_port_b=10.4 \
	ro.com.google.ime.height_ratio=1.0

	# Enable camera exif model/make reporting
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.camera.exif_reveal_make_model=true

	# Enable DeviceAsWebcam support
	PRODUCT_VENDOR_PROPERTIES += \
	ro.usb.uvc.enabled=true

	# DisplayPort should be disabled by default (b/300167292)
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.usb.displayport.enabled=0