SecurityPkg/Library/Tpm2DeviceLibDTpm/Tpm2InstanceLibDTpm.c

/** @file
  This library is TPM2 DTPM instance.
  It can be registered to Tpm2 Device router, to be active TPM2 engine,
  based on platform setting.

Copyright (c) 2013 - 2016, Intel Corporation. All rights reserved. <BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include <Library/BaseLib.h>
#include <Library/BaseMemoryLib.h>
#include <Library/DebugLib.h>
#include <Library/Tpm2DeviceLib.h>

#include <Guid/TpmInstance.h>

/**
  Dump PTP register information.

  @param[in] Register                Pointer to PTP register.
**/
VOID
DumpPtpInfo (
  IN VOID *Register
  );

/**
  This service enables the sending of commands to the TPM2.

  @param[in]      InputParameterBlockSize  Size of the TPM2 input parameter block.
  @param[in]      InputParameterBlock      Pointer to the TPM2 input parameter block.
  @param[in,out]  OutputParameterBlockSize Size of the TPM2 output parameter block.
  @param[in]      OutputParameterBlock     Pointer to the TPM2 output parameter block.

  @retval EFI_SUCCESS            The command byte stream was successfully sent to the device and a response was successfully received.
  @retval EFI_DEVICE_ERROR       The command was not successfully sent to the device or a response was not successfully received from the device.
  @retval EFI_BUFFER_TOO_SMALL   The output parameter block is too small. 
**/
EFI_STATUS
EFIAPI
DTpm2SubmitCommand (
  IN UINT32            InputParameterBlockSize,
  IN UINT8             *InputParameterBlock,
  IN OUT UINT32        *OutputParameterBlockSize,
  IN UINT8             *OutputParameterBlock
  );

/**
  This service requests use TPM2.

  @retval EFI_SUCCESS      Get the control of TPM2 chip.
  @retval EFI_NOT_FOUND    TPM2 not found.
  @retval EFI_DEVICE_ERROR Unexpected device behavior.
**/
EFI_STATUS
EFIAPI
DTpm2RequestUseTpm (
  VOID
  );

TPM2_DEVICE_INTERFACE  mDTpm2InternalTpm2Device = {
  TPM_DEVICE_INTERFACE_TPM20_DTPM,
  DTpm2SubmitCommand,
  DTpm2RequestUseTpm,
};

/**
  The function register DTPM2.0 instance.
  
  @retval EFI_SUCCESS   DTPM2.0 instance is registered, or system dose not surpport registr DTPM2.0 instance
**/
EFI_STATUS
EFIAPI
Tpm2InstanceLibDTpmConstructor (
  VOID
  )
{
  EFI_STATUS  Status;

  Status = Tpm2RegisterTpm2DeviceLib (&mDTpm2InternalTpm2Device);
  if ((Status == EFI_SUCCESS) || (Status == EFI_UNSUPPORTED)) {
    //
    // Unsupported means platform policy does not need this instance enabled.
    //
    if (Status == EFI_SUCCESS) {
      DumpPtpInfo ((VOID *) (UINTN) PcdGet64 (PcdTpmBaseAddress));
    }
    return EFI_SUCCESS;
  }
  return Status;
}