| /** @file | |
| Include file for I2C DXE Driver register definitions (PCIe config. space and memory space). | |
| Copyright (c) 2013-2015 Intel Corporation. | |
| This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #ifndef _I2C_REGS_H_ | |
| #define _I2C_REGS_H_ | |
| //---------------------------------------------------------------------------- | |
| /// I2C Device Address | |
| //---------------------------------------------------------------------------- | |
| typedef struct { | |
| /// | |
| /// The I2C hardware address to which the I2C device is preassigned or allocated. | |
| /// | |
| UINTN I2CDeviceAddress : 10; | |
| } EFI_I2C_DEVICE_ADDRESS; | |
| //---------------------------------------------------------------------------- | |
| /// I2C Addressing Mode (7-bit or 10 bit) | |
| //---------------------------------------------------------------------------- | |
| typedef enum _EFI_I2C_ADDR_MODE { | |
| EfiI2CSevenBitAddrMode, | |
| EfiI2CTenBitAddrMode, | |
| } EFI_I2C_ADDR_MODE; | |
| //---------------------------------------------------------------------------- | |
| // I2C Controller B:D:F | |
| //---------------------------------------------------------------------------- | |
| #define I2C_Bus 0x00 | |
| #define I2C_Device 0x15 | |
| #define I2C_Func 0x02 | |
| //---------------------------------------------------------------------------- | |
| // Memory Mapped Registers | |
| //---------------------------------------------------------------------------- | |
| #define I2C_REG_CON 0x00 // Control Register | |
| #define B_I2C_REG_CON_SPEED (BIT2+BIT1) // standard mode (01) or fast mode (10) | |
| #define B_I2C_REG_CON_10BITADD_MASTER (BIT4) // 7-bit addressing (0) or 10-bit addressing (1) | |
| #define I2C_REG_TAR 0x04 // Master Target Address Register | |
| #define B_I2C_REG_TAR (BIT9+BIT8+BIT7+BIT6+BIT5+BIT4+BIT3+BIT2+BIT1+BIT0) // Master Target Address bits | |
| #define I2C_REG_DATA_CMD 0x10 // Data Buffer and Command Register | |
| #define B_I2C_REG_DATA_CMD_RW (BIT8) // Data Buffer and Command Register Read/Write bit | |
| #define B_I2C_REG_DATA_CMD_STOP (BIT9) // Data Buffer and Command Register STOP bit | |
| #define B_I2C_REG_DATA_CMD_RESTART (BIT10) // Data Buffer and Command Register RESTART bit | |
| #define I2C_REG_SS_SCL_HCNT 0x14 // Standard Speed Clock SCL High Count Register | |
| #define I2C_REG_SS_SCL_LCNT 0x18 // Standard Speed Clock SCL Low Count Register | |
| #define I2C_REG_FS_SCL_HCNT 0x1C // Fast Speed Clock SCL High Count Register | |
| #define I2C_REG_FS_SCL_LCNT 0x20 // Fast Speed Clock SCL Low Count Register | |
| #define I2C_REG_INTR_STAT 0x2C // Interrupt Status Register | |
| #define B_I2C_REG_INTR_STAT_STOP_DET (BIT9) // Interrupt Status Register STOP_DET signal status | |
| #define I2C_REG_INTR_MASK 0x30 // Interrupt Status Mask Register | |
| #define I2C_REG_RAW_INTR_STAT 0x34 // Raw Interrupt Status Register | |
| #define I2C_REG_RAW_INTR_STAT_STOP_DET (BIT9) // Raw Interrupt Status Register STOP_DET signal status. | |
| #define I2C_REG_RAW_INTR_STAT_TX_ABRT (BIT6) // Raw Interrupt Status Register TX Abort status. | |
| #define I2C_REG_RAW_INTR_STAT_TX_OVER (BIT3) // Raw Interrupt Status Register TX Overflow signal status. | |
| #define I2C_REG_RAW_INTR_STAT_RX_OVER (BIT1) // Raw Interrupt Status Register RX Overflow signal status. | |
| #define I2C_REG_RAW_INTR_STAT_RX_UNDER (BIT0) // Raw Interrupt Status Register RX Underflow signal status. | |
| #define I2C_REG_RX_TL 0x38 // Receive FIFO Threshold Level Register | |
| #define I2C_REG_TX_TL 0x3C // Transmit FIFO Threshold Level Register | |
| #define I2C_REG_CLR_INT 0x40 // Clear Combined and Individual Interrupt Register | |
| #define I2C_REG_CLR_RX_UNDER 0x44 // Clear RX Under Interrupt Register | |
| #define I2C_REG_CLR_RX_OVER 0x48 // Clear RX Over Interrupt Register | |
| #define I2C_REG_CLR_TX_OVER 0x4C // Clear TX Over Interrupt Register | |
| #define I2C_REG_CLR_RD_REQ 0x50 // Clear RD REQ Interrupt Register | |
| #define I2C_REG_CLR_TX_ABRT 0x54 // Clear TX ABRT Interrupt Register | |
| #define I2C_REG_CLR_ACTIVITY 0x5C // Clear Activity Interrupt Register | |
| #define I2C_REG_CLR_STOP_DET 0x60 // Clear STOP DET Interrupt Register | |
| #define B_I2C_REG_CLR_STOP_DET (BIT0) // Clear STOP DET Interrupt Register | |
| #define I2C_REG_CLR_START_DET 0x64 // Clear START DET Interrupt Register | |
| #define B_I2C_REG_CLR_START_DET (BIT0) // Clear START DET Interrupt Register | |
| #define I2C_REG_ENABLE 0x6C // Enable Register | |
| #define B_I2C_REG_ENABLE (BIT0) // Enable (1) or disable (0) I2C Controller | |
| #define I2C_REG_STATUS 0x70 // Status Register | |
| #define I2C_REG_TXFLR 0x74 // Transmit FIFO Level Register | |
| #define B_I2C_REG_TXFLR (BIT3+BIT2+BIT1+BIT0) // Transmit FIFO Level Register bits | |
| #define I2C_REG_RXFLR 0x78 // Receive FIFO Level Register | |
| #define B_I2C_REG_RXFLR (BIT3+BIT2+BIT1+BIT0) // Receive FIFO Level Register bits | |
| #define I2C_REG_SDA_HOLD 0x7C // SDA HOLD Register | |
| #define I2C_REG_TX_ABRT_SOURCE 0x80 // Transmit Abort Source Register | |
| #define I2C_REG_ENABLE_STATUS 0x9C // Enable Status Register | |
| #define I2C_REG_FS_SPKLEN 0xA0 // SS and FS Spike Suppression Limit Register | |
| // | |
| // Features. | |
| // | |
| #define I2C_FIFO_SIZE 16 | |
| #endif |