| /** @file | |
| UEFI Multicast Trivial File Transfer Protocol v6 Definition, which is built upon | |
| the EFI UDPv6 Protocol and provides basic services for client-side unicast and/or | |
| multicast TFTP operations. | |
| Copyright (c) 2008 - 2011, Intel Corporation. All rights reserved.<BR> | |
| (C) Copyright 2016 Hewlett Packard Enterprise Development LP<BR> | |
| This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| @par Revision Reference: | |
| This Protocol is introduced in UEFI Specification 2.2 | |
| **/ | |
| #ifndef __EFI_MTFTP6_PROTOCOL_H__ | |
| #define __EFI_MTFTP6_PROTOCOL_H__ | |
| #define EFI_MTFTP6_SERVICE_BINDING_PROTOCOL_GUID \ | |
| { \ | |
| 0xd9760ff3, 0x3cca, 0x4267, {0x80, 0xf9, 0x75, 0x27, 0xfa, 0xfa, 0x42, 0x23 } \ | |
| } | |
| #define EFI_MTFTP6_PROTOCOL_GUID \ | |
| { \ | |
| 0xbf0a78ba, 0xec29, 0x49cf, {0xa1, 0xc9, 0x7a, 0xe5, 0x4e, 0xab, 0x6a, 0x51 } \ | |
| } | |
| typedef struct _EFI_MTFTP6_PROTOCOL EFI_MTFTP6_PROTOCOL; | |
| typedef struct _EFI_MTFTP6_TOKEN EFI_MTFTP6_TOKEN; | |
| /// | |
| /// MTFTP Packet OpCodes | |
| ///@{ | |
| #define EFI_MTFTP6_OPCODE_RRQ 1 ///< The MTFTPv6 packet is a read request. | |
| #define EFI_MTFTP6_OPCODE_WRQ 2 ///< The MTFTPv6 packet is a write request. | |
| #define EFI_MTFTP6_OPCODE_DATA 3 ///< The MTFTPv6 packet is a data packet. | |
| #define EFI_MTFTP6_OPCODE_ACK 4 ///< The MTFTPv6 packet is an acknowledgement packet. | |
| #define EFI_MTFTP6_OPCODE_ERROR 5 ///< The MTFTPv6 packet is an error packet. | |
| #define EFI_MTFTP6_OPCODE_OACK 6 ///< The MTFTPv6 packet is an option acknowledgement packet. | |
| #define EFI_MTFTP6_OPCODE_DIR 7 ///< The MTFTPv6 packet is a directory query packet. | |
| #define EFI_MTFTP6_OPCODE_DATA8 8 ///< The MTFTPv6 packet is a data packet with a big block number. | |
| #define EFI_MTFTP6_OPCODE_ACK8 9 ///< The MTFTPv6 packet is an acknowledgement packet with a big block number. | |
| ///@} | |
| /// | |
| /// MTFTP ERROR Packet ErrorCodes | |
| ///@{ | |
| /// | |
| /// The error code is not defined. See the error message in the packet (if any) for details. | |
| /// | |
| #define EFI_MTFTP6_ERRORCODE_NOT_DEFINED 0 | |
| /// | |
| /// The file was not found. | |
| /// | |
| #define EFI_MTFTP6_ERRORCODE_FILE_NOT_FOUND 1 | |
| /// | |
| /// There was an access violation. | |
| /// | |
| #define EFI_MTFTP6_ERRORCODE_ACCESS_VIOLATION 2 | |
| /// | |
| /// The disk was full or its allocation was exceeded. | |
| /// | |
| #define EFI_MTFTP6_ERRORCODE_DISK_FULL 3 | |
| /// | |
| /// The MTFTPv6 operation was illegal. | |
| /// | |
| #define EFI_MTFTP6_ERRORCODE_ILLEGAL_OPERATION 4 | |
| /// | |
| /// The transfer ID is unknown. | |
| /// | |
| #define EFI_MTFTP6_ERRORCODE_UNKNOWN_TRANSFER_ID 5 | |
| /// | |
| /// The file already exists. | |
| /// | |
| #define EFI_MTFTP6_ERRORCODE_FILE_ALREADY_EXISTS 6 | |
| /// | |
| /// There is no such user. | |
| /// | |
| #define EFI_MTFTP6_ERRORCODE_NO_SUCH_USER 7 | |
| /// | |
| /// The request has been denied due to option negotiation. | |
| /// | |
| #define EFI_MTFTP6_ERRORCODE_REQUEST_DENIED 8 | |
| ///@} | |
| #pragma pack(1) | |
| /// | |
| /// EFI_MTFTP6_REQ_HEADER | |
| /// | |
| typedef struct { | |
| /// | |
| /// For this packet type, OpCode = EFI_MTFTP6_OPCODE_RRQ for a read request | |
| /// or OpCode = EFI_MTFTP6_OPCODE_WRQ for a write request. | |
| /// | |
| UINT16 OpCode; | |
| /// | |
| /// The file name to be downloaded or uploaded. | |
| /// | |
| UINT8 Filename[1]; | |
| } EFI_MTFTP6_REQ_HEADER; | |
| /// | |
| /// EFI_MTFTP6_OACK_HEADER | |
| /// | |
| typedef struct { | |
| /// | |
| /// For this packet type, OpCode = EFI_MTFTP6_OPCODE_OACK. | |
| /// | |
| UINT16 OpCode; | |
| /// | |
| /// The option strings in the option acknowledgement packet. | |
| /// | |
| UINT8 Data[1]; | |
| } EFI_MTFTP6_OACK_HEADER; | |
| /// | |
| /// EFI_MTFTP6_DATA_HEADER | |
| /// | |
| typedef struct { | |
| /// | |
| /// For this packet type, OpCode = EFI_MTFTP6_OPCODE_DATA. | |
| /// | |
| UINT16 OpCode; | |
| /// | |
| /// Block number of this data packet. | |
| /// | |
| UINT16 Block; | |
| /// | |
| /// The content of this data packet. | |
| /// | |
| UINT8 Data[1]; | |
| } EFI_MTFTP6_DATA_HEADER; | |
| /// | |
| /// EFI_MTFTP6_ACK_HEADER | |
| /// | |
| typedef struct { | |
| /// | |
| /// For this packet type, OpCode = EFI_MTFTP6_OPCODE_ACK. | |
| /// | |
| UINT16 OpCode; | |
| /// | |
| /// The block number of the data packet that is being acknowledged. | |
| /// | |
| UINT16 Block[1]; | |
| } EFI_MTFTP6_ACK_HEADER; | |
| /// | |
| /// EFI_MTFTP6_DATA8_HEADER | |
| /// | |
| typedef struct { | |
| /// | |
| /// For this packet type, OpCode = EFI_MTFTP6_OPCODE_DATA8. | |
| /// | |
| UINT16 OpCode; | |
| /// | |
| /// The block number of data packet. | |
| /// | |
| UINT64 Block; | |
| /// | |
| /// The content of this data packet. | |
| /// | |
| UINT8 Data[1]; | |
| } EFI_MTFTP6_DATA8_HEADER; | |
| /// | |
| /// EFI_MTFTP6_ACK8_HEADER | |
| /// | |
| typedef struct { | |
| /// | |
| /// For this packet type, OpCode = EFI_MTFTP6_OPCODE_ACK8. | |
| /// | |
| UINT16 OpCode; | |
| /// | |
| /// The block number of the data packet that is being acknowledged. | |
| /// | |
| UINT64 Block[1]; | |
| } EFI_MTFTP6_ACK8_HEADER; | |
| /// | |
| /// EFI_MTFTP6_ERROR_HEADER | |
| /// | |
| typedef struct { | |
| /// | |
| /// For this packet type, OpCode = EFI_MTFTP6_OPCODE_ERROR. | |
| /// | |
| UINT16 OpCode; | |
| /// | |
| /// The error number as defined by the MTFTPv6 packet error codes. | |
| /// | |
| UINT16 ErrorCode; | |
| /// | |
| /// Error message string. | |
| /// | |
| UINT8 ErrorMessage[1]; | |
| } EFI_MTFTP6_ERROR_HEADER; | |
| /// | |
| /// EFI_MTFTP6_PACKET | |
| /// | |
| typedef union { | |
| UINT16 OpCode; ///< Type of packets as defined by the MTFTPv6 packet opcodes. | |
| EFI_MTFTP6_REQ_HEADER Rrq; ///< Read request packet header. | |
| EFI_MTFTP6_REQ_HEADER Wrq; ///< write request packet header. | |
| EFI_MTFTP6_OACK_HEADER Oack; ///< Option acknowledge packet header. | |
| EFI_MTFTP6_DATA_HEADER Data; ///< Data packet header. | |
| EFI_MTFTP6_ACK_HEADER Ack; ///< Acknowledgement packet header. | |
| EFI_MTFTP6_DATA8_HEADER Data8; ///< Data packet header with big block number. | |
| EFI_MTFTP6_ACK8_HEADER Ack8; ///< Acknowledgement header with big block number. | |
| EFI_MTFTP6_ERROR_HEADER Error; ///< Error packet header. | |
| } EFI_MTFTP6_PACKET; | |
| #pragma pack() | |
| /// | |
| /// EFI_MTFTP6_CONFIG_DATA | |
| /// | |
| typedef struct { | |
| /// | |
| /// The local IP address to use. Set to zero to let the underlying IPv6 | |
| /// driver choose a source address. If not zero it must be one of the | |
| /// configured IP addresses in the underlying IPv6 driver. | |
| /// | |
| EFI_IPv6_ADDRESS StationIp; | |
| /// | |
| /// Local port number. Set to zero to use the automatically assigned port number. | |
| /// | |
| UINT16 LocalPort; | |
| /// | |
| /// The IP address of the MTFTPv6 server. | |
| /// | |
| EFI_IPv6_ADDRESS ServerIp; | |
| /// | |
| /// The initial MTFTPv6 server port number. Request packets are | |
| /// sent to this port. This number is almost always 69 and using zero | |
| /// defaults to 69. | |
| UINT16 InitialServerPort; | |
| /// | |
| /// The number of times to transmit MTFTPv6 request packets and wait for a response. | |
| /// | |
| UINT16 TryCount; | |
| /// | |
| /// The number of seconds to wait for a response after sending the MTFTPv6 request packet. | |
| /// | |
| UINT16 TimeoutValue; | |
| } EFI_MTFTP6_CONFIG_DATA; | |
| /// | |
| /// EFI_MTFTP6_MODE_DATA | |
| /// | |
| typedef struct { | |
| /// | |
| /// The configuration data of this instance. | |
| /// | |
| EFI_MTFTP6_CONFIG_DATA ConfigData; | |
| /// | |
| /// The number of option strings in the following SupportedOptions array. | |
| /// | |
| UINT8 SupportedOptionCount; | |
| /// | |
| /// An array of null-terminated ASCII option strings that are recognized and supported by | |
| /// this EFI MTFTPv6 Protocol driver implementation. The buffer is | |
| /// read only to the caller and the caller should NOT free the buffer. | |
| /// | |
| UINT8 **SupportedOptions; | |
| } EFI_MTFTP6_MODE_DATA; | |
| /// | |
| /// EFI_MTFTP_OVERRIDE_DATA | |
| /// | |
| typedef struct { | |
| /// | |
| /// IP address of the MTFTPv6 server. If set to all zero, the value that | |
| /// was set by the EFI_MTFTP6_PROTOCOL.Configure() function will be used. | |
| /// | |
| EFI_IPv6_ADDRESS ServerIp; | |
| /// | |
| /// MTFTPv6 server port number. If set to zero, it will use the value | |
| /// that was set by the EFI_MTFTP6_PROTOCOL.Configure() function. | |
| /// | |
| UINT16 ServerPort; | |
| /// | |
| /// Number of times to transmit MTFTPv6 request packets and wait | |
| /// for a response. If set to zero, the value that was set by | |
| /// theEFI_MTFTP6_PROTOCOL.Configure() function will be used. | |
| /// | |
| UINT16 TryCount; | |
| /// | |
| /// Number of seconds to wait for a response after sending the | |
| /// MTFTPv6 request packet. If set to zero, the value that was set by | |
| /// the EFI_MTFTP6_PROTOCOL.Configure() function will be used. | |
| /// | |
| UINT16 TimeoutValue; | |
| } EFI_MTFTP6_OVERRIDE_DATA; | |
| /// | |
| /// EFI_MTFTP6_OPTION | |
| /// | |
| typedef struct { | |
| UINT8 *OptionStr; ///< Pointer to the null-terminated ASCII MTFTPv6 option string. | |
| UINT8 *ValueStr; ///< Pointer to the null-terminated ASCII MTFTPv6 value string. | |
| } EFI_MTFTP6_OPTION; | |
| /** | |
| EFI_MTFTP6_TIMEOUT_CALLBACK is a callback function that the caller provides to capture the | |
| timeout event in the EFI_MTFTP6_PROTOCOL.ReadFile(), EFI_MTFTP6_PROTOCOL.WriteFile() or | |
| EFI_MTFTP6_PROTOCOL.ReadDirectory() functions. | |
| Whenever a timeout occurs, the EFI MTFTPv6 Protocol driver will call the EFI_MTFTP6_TIMEOUT_CALLBACK | |
| function to notify the caller of the timeout event. Any status code other than EFI_SUCCESS | |
| that is returned from this function will abort the current download process. | |
| @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. | |
| @param[in] Token The token that the caller provided in the EFI_MTFTP6_PROTOCOl.ReadFile(), | |
| WriteFile() or ReadDirectory() function. | |
| @param[in] PacketLen Indicates the length of the packet. | |
| @param[in] Packet Pointer to an MTFTPv6 packet. | |
| @retval EFI_SUCCESS Operation success. | |
| @retval Others Aborts session. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MTFTP6_CHECK_PACKET)( | |
| IN EFI_MTFTP6_PROTOCOL *This, | |
| IN EFI_MTFTP6_TOKEN *Token, | |
| IN UINT16 PacketLen, | |
| IN EFI_MTFTP6_PACKET *Packet | |
| ); | |
| /** | |
| EFI_MTFTP6_TIMEOUT_CALLBACK is a callback function that the caller provides to capture the | |
| timeout event in the EFI_MTFTP6_PROTOCOL.ReadFile(), EFI_MTFTP6_PROTOCOL.WriteFile() or | |
| EFI_MTFTP6_PROTOCOL.ReadDirectory() functions. | |
| Whenever a timeout occurs, the EFI MTFTPv6 Protocol driver will call the EFI_MTFTP6_TIMEOUT_CALLBACK | |
| function to notify the caller of the timeout event. Any status code other than EFI_SUCCESS | |
| that is returned from this function will abort the current download process. | |
| @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. | |
| @param[in] Token The token that is provided in the EFI_MTFTP6_PROTOCOL.ReadFile() or | |
| EFI_MTFTP6_PROTOCOL.WriteFile() or EFI_MTFTP6_PROTOCOL.ReadDirectory() | |
| functions by the caller. | |
| @retval EFI_SUCCESS Operation success. | |
| @retval Others Aborts session. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MTFTP6_TIMEOUT_CALLBACK)( | |
| IN EFI_MTFTP6_PROTOCOL *This, | |
| IN EFI_MTFTP6_TOKEN *Token | |
| ); | |
| /** | |
| EFI_MTFTP6_PACKET_NEEDED is a callback function that the caller provides to feed data to the | |
| EFI_MTFTP6_PROTOCOL.WriteFile() function. | |
| EFI_MTFTP6_PACKET_NEEDED provides another mechanism for the caller to provide data to upload | |
| other than a static buffer. The EFI MTFTP6 Protocol driver always calls EFI_MTFTP6_PACKET_NEEDED | |
| to get packet data from the caller if no static buffer was given in the initial call to | |
| EFI_MTFTP6_PROTOCOL.WriteFile() function. Setting *Length to zero signals the end of the session. | |
| Returning a status code other than EFI_SUCCESS aborts the session. | |
| @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. | |
| @param[in] Token The token provided in the EFI_MTFTP6_PROTOCOL.WriteFile() by the caller. | |
| @param[in, out] Length Indicates the length of the raw data wanted on input, and the | |
| length the data available on output. | |
| @param[out] Buffer Pointer to the buffer where the data is stored. | |
| @retval EFI_SUCCESS Operation success. | |
| @retval Others Aborts session. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MTFTP6_PACKET_NEEDED)( | |
| IN EFI_MTFTP6_PROTOCOL *This, | |
| IN EFI_MTFTP6_TOKEN *Token, | |
| IN OUT UINT16 *Length, | |
| OUT VOID **Buffer | |
| ); | |
| struct _EFI_MTFTP6_TOKEN { | |
| /// | |
| /// The status that is returned to the caller at the end of the operation | |
| /// to indicate whether this operation completed successfully. | |
| /// Defined Status values are listed below. | |
| /// | |
| EFI_STATUS Status; | |
| /// | |
| /// The event that will be signaled when the operation completes. If | |
| /// set to NULL, the corresponding function will wait until the read or | |
| /// write operation finishes. The type of Event must be EVT_NOTIFY_SIGNAL. | |
| /// | |
| EFI_EVENT Event; | |
| /// | |
| /// If not NULL, the data that will be used to override the existing | |
| /// configure data. | |
| /// | |
| EFI_MTFTP6_OVERRIDE_DATA *OverrideData; | |
| /// | |
| /// Pointer to the null-terminated ASCII file name string. | |
| /// | |
| UINT8 *Filename; | |
| /// | |
| /// Pointer to the null-terminated ASCII mode string. If NULL, octet is used. | |
| /// | |
| UINT8 *ModeStr; | |
| /// | |
| /// Number of option/value string pairs. | |
| /// | |
| UINT32 OptionCount; | |
| /// | |
| /// Pointer to an array of option/value string pairs. Ignored if | |
| /// OptionCount is zero. Both a remote server and this driver | |
| /// implementation should support these options. If one or more | |
| /// options are unrecognized by this implementation, it is sent to the | |
| /// remote server without being changed. | |
| /// | |
| EFI_MTFTP6_OPTION *OptionList; | |
| /// | |
| /// On input, the size, in bytes, of Buffer. On output, the number | |
| /// of bytes transferred. | |
| /// | |
| UINT64 BufferSize; | |
| /// | |
| /// Pointer to the data buffer. Data that is downloaded from the | |
| /// MTFTPv6 server is stored here. Data that is uploaded to the | |
| /// MTFTPv6 server is read from here. Ignored if BufferSize is zero. | |
| /// | |
| VOID *Buffer; | |
| /// | |
| /// Pointer to the context that will be used by CheckPacket, | |
| /// TimeoutCallback and PacketNeeded. | |
| /// | |
| VOID *Context; | |
| /// | |
| /// Pointer to the callback function to check the contents of the | |
| /// received packet. | |
| /// | |
| EFI_MTFTP6_CHECK_PACKET CheckPacket; | |
| /// | |
| /// Pointer to the function to be called when a timeout occurs. | |
| /// | |
| EFI_MTFTP6_TIMEOUT_CALLBACK TimeoutCallback; | |
| /// | |
| /// Pointer to the function to provide the needed packet contents. | |
| /// Only used in WriteFile() operation. | |
| /// | |
| EFI_MTFTP6_PACKET_NEEDED PacketNeeded; | |
| }; | |
| /** | |
| Read the current operational settings. | |
| The GetModeData() function reads the current operational settings of this EFI MTFTPv6 | |
| Protocol driver instance. | |
| @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. | |
| @param[out] ModeData The buffer in which the EFI MTFTPv6 Protocol driver mode | |
| data is returned. | |
| @retval EFI_SUCCESS The configuration data was successfully returned. | |
| @retval EFI_OUT_OF_RESOURCES The required mode data could not be allocated. | |
| @retval EFI_INVALID_PARAMETER This is NULL or ModeData is NULL. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MTFTP6_GET_MODE_DATA)( | |
| IN EFI_MTFTP6_PROTOCOL *This, | |
| OUT EFI_MTFTP6_MODE_DATA *ModeData | |
| ); | |
| /** | |
| Initializes, changes, or resets the default operational setting for this EFI MTFTPv6 | |
| Protocol driver instance. | |
| The Configure() function is used to set and change the configuration data for this EFI | |
| MTFTPv6 Protocol driver instance. The configuration data can be reset to startup defaults by calling | |
| Configure() with MtftpConfigData set to NULL. Whenever the instance is reset, any | |
| pending operation is aborted. By changing the EFI MTFTPv6 Protocol driver instance configuration | |
| data, the client can connect to different MTFTPv6 servers. The configuration parameters in | |
| MtftpConfigData are used as the default parameters in later MTFTPv6 operations and can be | |
| overridden in later operations. | |
| @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. | |
| @param[in] MtftpConfigData Pointer to the configuration data structure. | |
| @retval EFI_SUCCESS The EFI MTFTPv6 Protocol instance was configured successfully. | |
| @retval EFI_INVALID_PARAMETER One or more following conditions are TRUE: | |
| - This is NULL. | |
| - MtftpConfigData.StationIp is neither zero nor one | |
| of the configured IP addresses in the underlying IPv6 driver. | |
| - MtftpCofigData.ServerIp is not a valid IPv6 unicast address. | |
| @retval EFI_ACCESS_DENIED - The configuration could not be changed at this time because there | |
| is some MTFTP background operation in progress. | |
| - MtftpCofigData.LocalPort is already in use. | |
| @retval EFI_NO_MAPPING The underlying IPv6 driver was responsible for choosing a source | |
| address for this instance, but no source address was available for use. | |
| @retval EFI_OUT_OF_RESOURCES The EFI MTFTPv6 Protocol driver instance data could not be | |
| allocated. | |
| @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. The EFI | |
| MTFTPv6 Protocol driver instance is not configured. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MTFTP6_CONFIGURE)( | |
| IN EFI_MTFTP6_PROTOCOL *This, | |
| IN EFI_MTFTP6_CONFIG_DATA *MtftpConfigData OPTIONAL | |
| ); | |
| /** | |
| Get information about a file from an MTFTPv6 server. | |
| The GetInfo() function assembles an MTFTPv6 request packet with options, sends it to the | |
| MTFTPv6 server, and may return an MTFTPv6 OACK, MTFTPv6 ERROR, or ICMP ERROR packet. | |
| Retries occur only if no response packets are received from the MTFTPv6 server before the | |
| timeout expires. | |
| @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. | |
| @param[in] OverrideData Data that is used to override the existing parameters. If NULL, the | |
| default parameters that were set in the EFI_MTFTP6_PROTOCOL.Configure() | |
| function are used. | |
| @param[in] Filename Pointer to null-terminated ASCII file name string. | |
| @param[in] ModeStr Pointer to null-terminated ASCII mode string. If NULL, octet will be used | |
| @param[in] OptionCount Number of option/value string pairs in OptionList. | |
| @param[in] OptionList Pointer to array of option/value string pairs. Ignored if | |
| OptionCount is zero. | |
| @param[out] PacketLength The number of bytes in the returned packet. | |
| @param[out] Packet The pointer to the received packet. This buffer must be freed by | |
| the caller. | |
| @retval EFI_SUCCESS An MTFTPv6 OACK packet was received and is in the Packet. | |
| @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: | |
| - This is NULL. | |
| - Filename is NULL | |
| - OptionCount is not zero and OptionList is NULL. | |
| - One or more options in OptionList have wrong format. | |
| - PacketLength is NULL. | |
| - OverrideData.ServerIp is not valid unicast IPv6 addresses. | |
| @retval EFI_UNSUPPORTED One or more options in the OptionList are unsupported by | |
| this implementation. | |
| @retval EFI_NOT_STARTED The EFI MTFTPv6 Protocol driver has not been started. | |
| @retval EFI_NO_MAPPING The underlying IPv6 driver was responsible for choosing a source | |
| address for this instance, but no source address was available for use. | |
| @retval EFI_ACCESS_DENIED The previous operation has not completed yet. | |
| @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. | |
| @retval EFI_TFTP_ERROR An MTFTPv6 ERROR packet was received and is in the Packet. | |
| @retval EFI_NETWORK_UNREACHABLE An ICMP network unreachable error packet was received and the Packet is set to NULL. | |
| @retval EFI_HOST_UNREACHABLE An ICMP host unreachable error packet was received and the Packet is set to NULL. | |
| @retval EFI_PROTOCOL_UNREACHABLE An ICMP protocol unreachable error packet was received and the Packet is set to NULL. | |
| @retval EFI_PORT_UNREACHABLE An ICMP port unreachable error packet was received and the Packet is set to NULL. | |
| @retval EFI_ICMP_ERROR Some other ICMP ERROR packet was received and the Packet is set to NULL. | |
| @retval EFI_PROTOCOL_ERROR An unexpected MTFTPv6 packet was received and is in the Packet. | |
| @retval EFI_TIMEOUT No responses were received from the MTFTPv6 server. | |
| @retval EFI_DEVICE_ERROR An unexpected network error or system error occurred. | |
| @retval EFI_NO_MEDIA There was a media error. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MTFTP6_GET_INFO)( | |
| IN EFI_MTFTP6_PROTOCOL *This, | |
| IN EFI_MTFTP6_OVERRIDE_DATA *OverrideData OPTIONAL, | |
| IN UINT8 *Filename, | |
| IN UINT8 *ModeStr OPTIONAL, | |
| IN UINT8 OptionCount, | |
| IN EFI_MTFTP6_OPTION *OptionList OPTIONAL, | |
| OUT UINT32 *PacketLength, | |
| OUT EFI_MTFTP6_PACKET **Packet OPTIONAL | |
| ); | |
| /** | |
| Parse the options in an MTFTPv6 OACK packet. | |
| The ParseOptions() function parses the option fields in an MTFTPv6 OACK packet and | |
| returns the number of options that were found and optionally a list of pointers to | |
| the options in the packet. | |
| If one or more of the option fields are not valid, then EFI_PROTOCOL_ERROR is returned | |
| and *OptionCount and *OptionList stop at the last valid option. | |
| @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. | |
| @param[in] PacketLen Length of the OACK packet to be parsed. | |
| @param[in] Packet Pointer to the OACK packet to be parsed. | |
| @param[out] OptionCount Pointer to the number of options in the following OptionList. | |
| @param[out] OptionList Pointer to EFI_MTFTP6_OPTION storage. Each pointer in the | |
| OptionList points to the corresponding MTFTP option buffer | |
| in the Packet. Call the EFI Boot Service FreePool() to | |
| release the OptionList if the options in this OptionList | |
| are not needed any more. | |
| @retval EFI_SUCCESS The OACK packet was valid and the OptionCount and | |
| OptionList parameters have been updated. | |
| @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: | |
| - PacketLen is 0. | |
| - Packet is NULL or Packet is not a valid MTFTPv6 packet. | |
| - OptionCount is NULL. | |
| @retval EFI_NOT_FOUND No options were found in the OACK packet. | |
| @retval EFI_OUT_OF_RESOURCES Storage for the OptionList array can not be allocated. | |
| @retval EFI_PROTOCOL_ERROR One or more of the option fields is invalid. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MTFTP6_PARSE_OPTIONS)( | |
| IN EFI_MTFTP6_PROTOCOL *This, | |
| IN UINT32 PacketLen, | |
| IN EFI_MTFTP6_PACKET *Packet, | |
| OUT UINT32 *OptionCount, | |
| OUT EFI_MTFTP6_OPTION **OptionList OPTIONAL | |
| ); | |
| /** | |
| Download a file from an MTFTPv6 server. | |
| The ReadFile() function is used to initialize and start an MTFTPv6 download process and | |
| optionally wait for completion. When the download operation completes, whether successfully or | |
| not, the Token.Status field is updated by the EFI MTFTPv6 Protocol driver and then | |
| Token.Event is signaled if it is not NULL. | |
| Data can be downloaded from the MTFTPv6 server into either of the following locations: | |
| - A fixed buffer that is pointed to by Token.Buffer | |
| - A download service function that is pointed to by Token.CheckPacket | |
| If both Token.Buffer and Token.CheckPacket are used, then Token.CheckPacket | |
| will be called first. If the call is successful, the packet will be stored in Token.Buffer. | |
| @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. | |
| @param[in] Token Pointer to the token structure to provide the parameters that are | |
| used in this operation. | |
| @retval EFI_SUCCESS The data file has been transferred successfully. | |
| @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. | |
| @retval EFI_BUFFER_TOO_SMALL BufferSize is not zero but not large enough to hold the | |
| downloaded data in downloading process. | |
| @retval EFI_ABORTED Current operation is aborted by user. | |
| @retval EFI_NETWORK_UNREACHABLE An ICMP network unreachable error packet was received. | |
| @retval EFI_HOST_UNREACHABLE An ICMP host unreachable error packet was received. | |
| @retval EFI_PROTOCOL_UNREACHABLE An ICMP protocol unreachable error packet was received. | |
| @retval EFI_PORT_UNREACHABLE An ICMP port unreachable error packet was received. | |
| @retval EFI_ICMP_ERROR An ICMP ERROR packet was received. | |
| @retval EFI_TIMEOUT No responses were received from the MTFTPv6 server. | |
| @retval EFI_TFTP_ERROR An MTFTPv6 ERROR packet was received. | |
| @retval EFI_DEVICE_ERROR An unexpected network error or system error occurred. | |
| @retval EFI_NO_MEDIA There was a media error. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MTFTP6_READ_FILE)( | |
| IN EFI_MTFTP6_PROTOCOL *This, | |
| IN EFI_MTFTP6_TOKEN *Token | |
| ); | |
| /** | |
| Send a file to an MTFTPv6 server. May be unsupported in some implementations. | |
| The WriteFile() function is used to initialize an uploading operation with the given option list | |
| and optionally wait for completion. If one or more of the options is not supported by the server, the | |
| unsupported options are ignored and a standard TFTP process starts instead. When the upload | |
| process completes, whether successfully or not, Token.Event is signaled, and the EFI MTFTPv6 | |
| Protocol driver updates Token.Status. | |
| The caller can supply the data to be uploaded in the following two modes: | |
| - Through the user-provided buffer | |
| - Through a callback function | |
| With the user-provided buffer, the Token.BufferSize field indicates the length of the buffer, | |
| and the driver will upload the data in the buffer. With an EFI_MTFTP6_PACKET_NEEDED | |
| callback function, the driver will call this callback function to get more data from the user to upload. | |
| See the definition of EFI_MTFTP6_PACKET_NEEDED for more information. These two modes | |
| cannot be used at the same time. The callback function will be ignored if the user provides the | |
| buffer. | |
| @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. | |
| @param[in] Token Pointer to the token structure to provide the parameters that are | |
| used in this operation. | |
| @retval EFI_SUCCESS The upload session has started. | |
| @retval EFI_UNSUPPORTED The operation is not supported by this implementation. | |
| @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: | |
| - This is NULL. | |
| - Token is NULL. | |
| - Token.Filename is NULL. | |
| - Token.OptionCount is not zero and Token.OptionList is NULL. | |
| - One or more options in Token.OptionList have wrong format. | |
| - Token.Buffer and Token.PacketNeeded are both NULL. | |
| - Token.OverrideData.ServerIp is not valid unicast IPv6 addresses. | |
| @retval EFI_UNSUPPORTED One or more options in the Token.OptionList are not | |
| supported by this implementation. | |
| @retval EFI_NOT_STARTED The EFI MTFTPv6 Protocol driver has not been started. | |
| @retval EFI_NO_MAPPING The underlying IPv6 driver was responsible for choosing a source | |
| address for this instance, but no source address was available for use. | |
| @retval EFI_ALREADY_STARTED This Token is already being used in another MTFTPv6 session. | |
| @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. | |
| @retval EFI_ACCESS_DENIED The previous operation has not completed yet. | |
| @retval EFI_DEVICE_ERROR An unexpected network error or system error occurred. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MTFTP6_WRITE_FILE)( | |
| IN EFI_MTFTP6_PROTOCOL *This, | |
| IN EFI_MTFTP6_TOKEN *Token | |
| ); | |
| /** | |
| Download a data file directory from an MTFTPv6 server. May be unsupported in some implementations. | |
| The ReadDirectory() function is used to return a list of files on the MTFTPv6 server that are | |
| logically (or operationally) related to Token.Filename. The directory request packet that is sent | |
| to the server is built with the option list that was provided by caller, if present. | |
| The file information that the server returns is put into either of the following locations: | |
| - A fixed buffer that is pointed to by Token.Buffer | |
| - A download service function that is pointed to by Token.CheckPacket | |
| If both Token.Buffer and Token.CheckPacket are used, then Token.CheckPacket | |
| will be called first. If the call is successful, the packet will be stored in Token.Buffer. | |
| The returned directory listing in the Token.Buffer or EFI_MTFTP6_PACKET consists of a list | |
| of two or three variable-length ASCII strings, each terminated by a null character, for each file in the | |
| directory. If the multicast option is involved, the first field of each directory entry is the static | |
| multicast IP address and UDP port number that is associated with the file name. The format of the | |
| field is ip:ip:ip:ip:port. If the multicast option is not involved, this field and its terminating | |
| null character are not present. | |
| The next field of each directory entry is the file name and the last field is the file information string. | |
| The information string contains the file size and the create/modify timestamp. The format of the | |
| information string is filesize yyyy-mm-dd hh:mm:ss:ffff. The timestamp is | |
| Coordinated Universal Time (UTC; also known as Greenwich Mean Time [GMT]). | |
| @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. | |
| @param[in] Token Pointer to the token structure to provide the parameters that are | |
| used in this operation. | |
| @retval EFI_SUCCESS The MTFTPv6 related file "directory" has been downloaded. | |
| @retval EFI_UNSUPPORTED The EFI MTFTPv6 Protocol driver does not support this function. | |
| @retval EFI_INVALID_PARAMETER One or more of the following conditions is TRUE: | |
| - This is NULL. | |
| - Token is NULL. | |
| - Token.Filename is NULL. | |
| - Token.OptionCount is not zero and Token.OptionList is NULL. | |
| - One or more options in Token.OptionList have wrong format. | |
| - Token.Buffer and Token.CheckPacket are both NULL. | |
| - Token.OverrideData.ServerIp is not valid unicast IPv6 addresses. | |
| @retval EFI_UNSUPPORTED One or more options in the Token.OptionList are not | |
| supported by this implementation. | |
| @retval EFI_NOT_STARTED The EFI MTFTPv6 Protocol driver has not been started. | |
| @retval EFI_NO_MAPPING The underlying IPv6 driver was responsible for choosing a source | |
| address for this instance, but no source address was available for use. | |
| @retval EFI_ALREADY_STARTED This Token is already being used in another MTFTPv6 session. | |
| @retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated. | |
| @retval EFI_ACCESS_DENIED The previous operation has not completed yet. | |
| @retval EFI_DEVICE_ERROR An unexpected network error or system error occurred. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MTFTP6_READ_DIRECTORY)( | |
| IN EFI_MTFTP6_PROTOCOL *This, | |
| IN EFI_MTFTP6_TOKEN *Token | |
| ); | |
| /** | |
| Polls for incoming data packets and processes outgoing data packets. | |
| The Poll() function can be used by network drivers and applications to increase the rate that data | |
| packets are moved between the communications device and the transmit and receive queues. | |
| In some systems, the periodic timer event in the managed network driver may not poll the | |
| underlying communications device fast enough to transmit and/or receive all data packets without | |
| missing incoming packets or dropping outgoing packets. Drivers and applications that are | |
| experiencing packet loss should try calling the Poll() function more often. | |
| @param[in] This Pointer to the EFI_MTFTP6_PROTOCOL instance. | |
| @retval EFI_SUCCESS Incoming or outgoing data was processed. | |
| @retval EFI_NOT_STARTED This EFI MTFTPv6 Protocol instance has not been started. | |
| @retval EFI_INVALID_PARAMETER This is NULL. | |
| @retval EFI_DEVICE_ERROR An unexpected system or network error occurred. | |
| @retval EFI_TIMEOUT Data was dropped out of the transmit and/or receive queue. | |
| Consider increasing the polling rate. | |
| **/ | |
| typedef | |
| EFI_STATUS | |
| (EFIAPI *EFI_MTFTP6_POLL)( | |
| IN EFI_MTFTP6_PROTOCOL *This | |
| ); | |
| /// | |
| /// The EFI_MTFTP6_PROTOCOL is designed to be used by UEFI drivers and applications to transmit | |
| /// and receive data files. The EFI MTFTPv6 Protocol driver uses the underlying EFI UDPv6 Protocol | |
| /// driver and EFI IPv6 Protocol driver. | |
| /// | |
| struct _EFI_MTFTP6_PROTOCOL { | |
| EFI_MTFTP6_GET_MODE_DATA GetModeData; | |
| EFI_MTFTP6_CONFIGURE Configure; | |
| EFI_MTFTP6_GET_INFO GetInfo; | |
| EFI_MTFTP6_PARSE_OPTIONS ParseOptions; | |
| EFI_MTFTP6_READ_FILE ReadFile; | |
| EFI_MTFTP6_WRITE_FILE WriteFile; | |
| EFI_MTFTP6_READ_DIRECTORY ReadDirectory; | |
| EFI_MTFTP6_POLL Poll; | |
| }; | |
| extern EFI_GUID gEfiMtftp6ServiceBindingProtocolGuid; | |
| extern EFI_GUID gEfiMtftp6ProtocolGuid; | |
| #endif | |