| # Primary Arch |
| TARGET_ARCH := arm |
| TARGET_ARCH_VARIANT := armv8-a |
| TARGET_CPU_VARIANT := cortex-a53 |
| TARGET_CPU_ABI := armeabi-v7a |
| TARGET_CPU_ABI2 := armeabi |
| |
| TARGET_USES_64_BIT_BINDER := true |
| TARGET_BOARD_PLATFORM := poplar |
| TARGET_BOOTLOADER_BOARD_NAME := poplar |
| |
| BOARD_FLASH_BLOCK_SIZE := 512 |
| |
| BOARD_BOOTIMAGE_PARTITION_SIZE := 33554432 |
| |
| BOARD_SYSTEMIMAGE_PARTITION_SIZE := 1610612224 |
| BOARD_SYSTEMIMAGE_FILE_SYSTEM_TYPE := ext4 |
| |
| BOARD_VENDORIMAGE_PARTITION_SIZE := 268434944 |
| BOARD_VENDORIMAGE_FILE_SYSTEM_TYPE := ext4 |
| |
| BOARD_USERDATAIMAGE_PARTITION_SIZE := 5456789504 |
| BOARD_USERDATAIMAGE_FILE_SYSTEM_TYPE := ext4 |
| |
| BOARD_CACHEIMAGE_PARTITION_SIZE := 268434944 |
| BOARD_CACHEIMAGE_FILE_SYSTEM_TYPE := ext4 |
| |
| TARGET_USERIMAGES_USE_EXT4 := true |
| TARGET_NO_BOOTLOADER := false |
| TARGET_BOOTLOADER_IS_2ND = true |
| TARGET_NO_KERNEL := false |
| TARGET_NO_RECOVERY := true |
| TARGET_NO_RADIOIMAGE := true |
| |
| BOARD_KERNEL_CMDLINE := androidboot.hardware=poplar androidboot.selinux=permissive firmware_class.path=/vendor/firmware mmz=ddr,0,0,60M |
| BOARD_KERNEL_CMDLINE += printk.devkmsg=on |
| BOARD_KERNEL_CMDLINE += blkdevparts=mmcblk1:4193792@512(loader),40m(boot),1610612224(system),5993660928,268434944@1580m(vendor),268434944@1836m(cache),5364m@2092m(userdata) |
| |
| #sepolicy |
| BOARD_SEPOLICY_DIRS := device/linaro/poplar/sepolicy |
| |
| # HAL's build config |
| # build config of feature graphics |
| TARGET_USES_HWC2 := true |
| |
| # wifi |
| BOARD_WLAN_DEVICE := rtl |
| WPA_SUPPLICANT_VERSION := VER_0_8_X |
| BOARD_WPA_SUPPLICANT_DRIVER := NL80211 |
| BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE) |
| BOARD_HOSTAPD_DRIVER := NL80211 |
| BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_$(BOARD_WLAN_DEVICE) |
| |
| TARGET_COPY_OUT_VENDOR := vendor |
| |
| # Enable Treble |
| PRODUCT_FULL_TREBLE_OVERRIDE := true |
| BOARD_VNDK_VERSION := current |
