drivers/phy/phy-exynos4x12-usb2.c - kernel/common - Git at Google

 /*
  * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4x12 support
  *
  * Copyright (C) 2013 Samsung Electronics Co., Ltd.
  * Author: Kamil Debski <[email protected]>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/phy/phy.h>
 #include <linux/regmap.h>
 #include "phy-samsung-usb2.h"

 /* Exynos USB PHY registers */

 /* PHY power control */
 #define EXYNOS_4x12_UPHYPWR			0x0

 #define EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND	BIT(0)
 #define EXYNOS_4x12_UPHYPWR_PHY0_PWR		BIT(3)
 #define EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR	BIT(4)
 #define EXYNOS_4x12_UPHYPWR_PHY0_SLEEP		BIT(5)
 #define EXYNOS_4x12_UPHYPWR_PHY0 ( \
 	EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND | \
 	EXYNOS_4x12_UPHYPWR_PHY0_PWR | \
 	EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR | \
 	EXYNOS_4x12_UPHYPWR_PHY0_SLEEP)

 #define EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND	BIT(6)
 #define EXYNOS_4x12_UPHYPWR_PHY1_PWR		BIT(7)
 #define EXYNOS_4x12_UPHYPWR_PHY1_SLEEP		BIT(8)
 #define EXYNOS_4x12_UPHYPWR_PHY1 ( \
 	EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND | \
 	EXYNOS_4x12_UPHYPWR_PHY1_PWR | \
 	EXYNOS_4x12_UPHYPWR_PHY1_SLEEP)

 #define EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND	BIT(9)
 #define EXYNOS_4x12_UPHYPWR_HSIC0_PWR		BIT(10)
 #define EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP		BIT(11)
 #define EXYNOS_4x12_UPHYPWR_HSIC0 ( \
 	EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND | \
 	EXYNOS_4x12_UPHYPWR_HSIC0_PWR | \
 	EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP)

 #define EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND	BIT(12)
 #define EXYNOS_4x12_UPHYPWR_HSIC1_PWR		BIT(13)
 #define EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP		BIT(14)
 #define EXYNOS_4x12_UPHYPWR_HSIC1 ( \
 	EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND | \
 	EXYNOS_4x12_UPHYPWR_HSIC1_PWR | \
 	EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP)

 /* PHY clock control */
 #define EXYNOS_4x12_UPHYCLK			0x4

 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK	(0x7 << 0)
 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET	0
 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6	(0x0 << 0)
 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ	(0x1 << 0)
 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ	(0x2 << 0)
 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2	(0x3 << 0)
 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ	(0x4 << 0)
 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ	(0x5 << 0)
 #define EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ	(0x7 << 0)

 #define EXYNOS_3250_UPHYCLK_REFCLKSEL		(0x2 << 8)

 #define EXYNOS_4x12_UPHYCLK_PHY0_ID_PULLUP	BIT(3)
 #define EXYNOS_4x12_UPHYCLK_PHY0_COMMON_ON	BIT(4)
 #define EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON	BIT(7)

 #define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_MASK	(0x7f << 10)
 #define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_OFFSET  10
 #define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_12MHZ	(0x24 << 10)
 #define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_15MHZ	(0x1c << 10)
 #define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_16MHZ	(0x1a << 10)
 #define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_19MHZ2	(0x15 << 10)
 #define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_20MHZ	(0x14 << 10)

 /* PHY reset control */
 #define EXYNOS_4x12_UPHYRST			0x8

 #define EXYNOS_4x12_URSTCON_PHY0		BIT(0)
 #define EXYNOS_4x12_URSTCON_OTG_HLINK		BIT(1)
 #define EXYNOS_4x12_URSTCON_OTG_PHYLINK		BIT(2)
 #define EXYNOS_4x12_URSTCON_HOST_PHY		BIT(3)
 /* The following bit defines are presented in the
  * order taken from the Exynos4412 reference manual.
  *
  * During experiments with the hardware and debugging
  * it was determined that the hardware behaves contrary
  * to the manual.
  *
  * The following bit values were chaned accordingly to the
  * results of real hardware experiments.
  */
 #define EXYNOS_4x12_URSTCON_PHY1		BIT(4)
 #define EXYNOS_4x12_URSTCON_HSIC0		BIT(6)
 #define EXYNOS_4x12_URSTCON_HSIC1		BIT(5)
 #define EXYNOS_4x12_URSTCON_HOST_LINK_ALL	BIT(7)
 #define EXYNOS_4x12_URSTCON_HOST_LINK_P0	BIT(10)
 #define EXYNOS_4x12_URSTCON_HOST_LINK_P1	BIT(9)
 #define EXYNOS_4x12_URSTCON_HOST_LINK_P2	BIT(8)

 /* Isolation, configured in the power management unit */
 #define EXYNOS_4x12_USB_ISOL_OFFSET		0x704
 #define EXYNOS_4x12_USB_ISOL_OTG		BIT(0)
 #define EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET	0x708
 #define EXYNOS_4x12_USB_ISOL_HSIC0		BIT(0)
 #define EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET	0x70c
 #define EXYNOS_4x12_USB_ISOL_HSIC1		BIT(0)

 /* Mode switching SUB Device <-> Host */
 #define EXYNOS_4x12_MODE_SWITCH_OFFSET		0x21c
 #define EXYNOS_4x12_MODE_SWITCH_MASK		1
 #define EXYNOS_4x12_MODE_SWITCH_DEVICE		0
 #define EXYNOS_4x12_MODE_SWITCH_HOST		1

 enum exynos4x12_phy_id {
 	EXYNOS4x12_DEVICE,
 	EXYNOS4x12_HOST,
 	EXYNOS4x12_HSIC0,
 	EXYNOS4x12_HSIC1,
 	EXYNOS4x12_NUM_PHYS,
 };

 /*
  * exynos4x12_rate_to_clk() converts the supplied clock rate to the value that
  * can be written to the phy register.
  */
 static int exynos4x12_rate_to_clk(unsigned long rate, u32 *reg)
 {
 	/* EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK */

 	switch (rate) {
 	case 9600 * KHZ:
 		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6;
 		break;
 	case 10 * MHZ:
 		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ;
 		break;
 	case 12 * MHZ:
 		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ;
 		break;
 	case 19200 * KHZ:
 		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2;
 		break;
 	case 20 * MHZ:
 		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ;
 		break;
 	case 24 * MHZ:
 		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ;
 		break;
 	case 50 * MHZ:
 		*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ;
 		break;
 	default:
 		return -EINVAL;
 	}

 	return 0;
 }

 static void exynos4x12_isol(struct samsung_usb2_phy_instance *inst, bool on)
 {
 	struct samsung_usb2_phy_driver *drv = inst->drv;
 	u32 offset;
 	u32 mask;

 	switch (inst->cfg->id) {
 	case EXYNOS4x12_DEVICE:
 	case EXYNOS4x12_HOST:
 		offset = EXYNOS_4x12_USB_ISOL_OFFSET;
 		mask = EXYNOS_4x12_USB_ISOL_OTG;
 		break;
 	case EXYNOS4x12_HSIC0:
 		offset = EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET;
 		mask = EXYNOS_4x12_USB_ISOL_HSIC0;
 		break;
 	case EXYNOS4x12_HSIC1:
 		offset = EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET;
 		mask = EXYNOS_4x12_USB_ISOL_HSIC1;
 		break;
 	default:
 		return;
 	};

 	regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
 }

 static void exynos4x12_setup_clk(struct samsung_usb2_phy_instance *inst)
 {
 	struct samsung_usb2_phy_driver *drv = inst->drv;
 	u32 clk;

 	clk = readl(drv->reg_phy + EXYNOS_4x12_UPHYCLK);
 	clk &= ~EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK;

 	if (drv->cfg->has_refclk_sel)
 		clk = EXYNOS_3250_UPHYCLK_REFCLKSEL;

 	clk |= drv->ref_reg_val << EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET;
 	clk |= EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON;
 	writel(clk, drv->reg_phy + EXYNOS_4x12_UPHYCLK);
 }

 static void exynos4x12_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
 {
 	struct samsung_usb2_phy_driver *drv = inst->drv;
 	u32 rstbits = 0;
 	u32 phypwr = 0;
 	u32 rst;
 	u32 pwr;

 	switch (inst->cfg->id) {
 	case EXYNOS4x12_DEVICE:
 		phypwr =	EXYNOS_4x12_UPHYPWR_PHY0;
 		rstbits =	EXYNOS_4x12_URSTCON_PHY0;
 		break;
 	case EXYNOS4x12_HOST:
 		phypwr =	EXYNOS_4x12_UPHYPWR_PHY1;
 		rstbits =	EXYNOS_4x12_URSTCON_HOST_PHY |
 				EXYNOS_4x12_URSTCON_PHY1 |
 				EXYNOS_4x12_URSTCON_HOST_LINK_P0;
 		break;
 	case EXYNOS4x12_HSIC0:
 		phypwr =	EXYNOS_4x12_UPHYPWR_HSIC0;
 		rstbits =	EXYNOS_4x12_URSTCON_HSIC0 |
 				EXYNOS_4x12_URSTCON_HOST_LINK_P1;
 		break;
 	case EXYNOS4x12_HSIC1:
 		phypwr =	EXYNOS_4x12_UPHYPWR_HSIC1;
 		rstbits =	EXYNOS_4x12_URSTCON_HSIC1 |
 				EXYNOS_4x12_URSTCON_HOST_LINK_P1;
 		break;
 	};

 	if (on) {
 		pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR);
 		pwr &= ~phypwr;
 		writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR);

 		rst = readl(drv->reg_phy + EXYNOS_4x12_UPHYRST);
 		rst |= rstbits;
 		writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST);
 		udelay(10);
 		rst &= ~rstbits;
 		writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST);
 		/* The following delay is necessary for the reset sequence to be
 		 * completed */
 		udelay(80);
 	} else {
 		pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR);
 		pwr |= phypwr;
 		writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR);
 	}
 }

 static void exynos4x12_power_on_int(struct samsung_usb2_phy_instance *inst)
 {
 	if (inst->int_cnt++ > 0)
 		return;

 	exynos4x12_setup_clk(inst);
 	exynos4x12_isol(inst, 0);
 	exynos4x12_phy_pwr(inst, 1);
 }

 static int exynos4x12_power_on(struct samsung_usb2_phy_instance *inst)
 {
 	struct samsung_usb2_phy_driver *drv = inst->drv;

 	if (inst->ext_cnt++ > 0)
 		return 0;

 	if (inst->cfg->id == EXYNOS4x12_HOST) {
 		regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET,
 						EXYNOS_4x12_MODE_SWITCH_MASK,
 						EXYNOS_4x12_MODE_SWITCH_HOST);
 		exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]);
 	}

 	if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch)
 		regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET,
 						EXYNOS_4x12_MODE_SWITCH_MASK,
 						EXYNOS_4x12_MODE_SWITCH_DEVICE);

 	if (inst->cfg->id == EXYNOS4x12_HSIC0 ||
 		inst->cfg->id == EXYNOS4x12_HSIC1) {
 		exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]);
 		exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_HOST]);
 	}

 	exynos4x12_power_on_int(inst);

 	return 0;
 }

 static void exynos4x12_power_off_int(struct samsung_usb2_phy_instance *inst)
 {
 	if (inst->int_cnt-- > 1)
 		return;

 	exynos4x12_isol(inst, 1);
 	exynos4x12_phy_pwr(inst, 0);
 }

 static int exynos4x12_power_off(struct samsung_usb2_phy_instance *inst)
 {
 	struct samsung_usb2_phy_driver *drv = inst->drv;

 	if (inst->ext_cnt-- > 1)
 		return 0;

 	if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch)
 		regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET,
 						EXYNOS_4x12_MODE_SWITCH_MASK,
 						EXYNOS_4x12_MODE_SWITCH_HOST);

 	if (inst->cfg->id == EXYNOS4x12_HOST)
 		exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]);

 	if (inst->cfg->id == EXYNOS4x12_HSIC0 ||
 		inst->cfg->id == EXYNOS4x12_HSIC1) {
 		exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]);
 		exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_HOST]);
 	}

 	exynos4x12_power_off_int(inst);

 	return 0;
 }


 static const struct samsung_usb2_common_phy exynos4x12_phys[] = {
 	{
 		.label		= "device",
 		.id		= EXYNOS4x12_DEVICE,
 		.power_on	= exynos4x12_power_on,
 		.power_off	= exynos4x12_power_off,
 	},
 	{
 		.label		= "host",
 		.id		= EXYNOS4x12_HOST,
 		.power_on	= exynos4x12_power_on,
 		.power_off	= exynos4x12_power_off,
 	},
 	{
 		.label		= "hsic0",
 		.id		= EXYNOS4x12_HSIC0,
 		.power_on	= exynos4x12_power_on,
 		.power_off	= exynos4x12_power_off,
 	},
 	{
 		.label		= "hsic1",
 		.id		= EXYNOS4x12_HSIC1,
 		.power_on	= exynos4x12_power_on,
 		.power_off	= exynos4x12_power_off,
 	},
 };

 const struct samsung_usb2_phy_config exynos3250_usb2_phy_config = {
 	.has_refclk_sel		= 1,
 	.num_phys		= 1,
 	.phys			= exynos4x12_phys,
 	.rate_to_clk		= exynos4x12_rate_to_clk,
 };

 const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config = {
 	.has_mode_switch	= 1,
 	.num_phys		= EXYNOS4x12_NUM_PHYS,
 	.phys			= exynos4x12_phys,
 	.rate_to_clk		= exynos4x12_rate_to_clk,
 };
	/*
	* Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4x12 support
	*
	* Copyright (C) 2013 Samsung Electronics Co., Ltd.
	* Author: Kamil Debski <[email protected]>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	#include <linux/delay.h>
	#include <linux/io.h>
	#include <linux/phy/phy.h>
	#include <linux/regmap.h>
	#include "phy-samsung-usb2.h"

	/* Exynos USB PHY registers */

	/* PHY power control */
	#define EXYNOS_4x12_UPHYPWR 0x0

	#define EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND BIT(0)
	#define EXYNOS_4x12_UPHYPWR_PHY0_PWR BIT(3)
	#define EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR BIT(4)
	#define EXYNOS_4x12_UPHYPWR_PHY0_SLEEP BIT(5)
	#define EXYNOS_4x12_UPHYPWR_PHY0 ( \
	EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND \| \
	EXYNOS_4x12_UPHYPWR_PHY0_PWR \| \
	EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR \| \
	EXYNOS_4x12_UPHYPWR_PHY0_SLEEP)

	#define EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND BIT(6)
	#define EXYNOS_4x12_UPHYPWR_PHY1_PWR BIT(7)
	#define EXYNOS_4x12_UPHYPWR_PHY1_SLEEP BIT(8)
	#define EXYNOS_4x12_UPHYPWR_PHY1 ( \
	EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND \| \
	EXYNOS_4x12_UPHYPWR_PHY1_PWR \| \
	EXYNOS_4x12_UPHYPWR_PHY1_SLEEP)

	#define EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND BIT(9)
	#define EXYNOS_4x12_UPHYPWR_HSIC0_PWR BIT(10)
	#define EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP BIT(11)
	#define EXYNOS_4x12_UPHYPWR_HSIC0 ( \
	EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND \| \
	EXYNOS_4x12_UPHYPWR_HSIC0_PWR \| \
	EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP)

	#define EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND BIT(12)
	#define EXYNOS_4x12_UPHYPWR_HSIC1_PWR BIT(13)
	#define EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP BIT(14)
	#define EXYNOS_4x12_UPHYPWR_HSIC1 ( \
	EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND \| \
	EXYNOS_4x12_UPHYPWR_HSIC1_PWR \| \
	EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP)

	/* PHY clock control */
	#define EXYNOS_4x12_UPHYCLK 0x4

	#define EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK (0x7 << 0)
	#define EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET 0
	#define EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6 (0x0 << 0)
	#define EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ (0x1 << 0)
	#define EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0)
	#define EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2 (0x3 << 0)
	#define EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ (0x4 << 0)
	#define EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ (0x5 << 0)
	#define EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ (0x7 << 0)

	#define EXYNOS_3250_UPHYCLK_REFCLKSEL (0x2 << 8)

	#define EXYNOS_4x12_UPHYCLK_PHY0_ID_PULLUP BIT(3)
	#define EXYNOS_4x12_UPHYCLK_PHY0_COMMON_ON BIT(4)
	#define EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON BIT(7)

	#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_MASK (0x7f << 10)
	#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_OFFSET 10
	#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_12MHZ (0x24 << 10)
	#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_15MHZ (0x1c << 10)
	#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_16MHZ (0x1a << 10)
	#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_19MHZ2 (0x15 << 10)
	#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_20MHZ (0x14 << 10)

	/* PHY reset control */
	#define EXYNOS_4x12_UPHYRST 0x8

	#define EXYNOS_4x12_URSTCON_PHY0 BIT(0)
	#define EXYNOS_4x12_URSTCON_OTG_HLINK BIT(1)
	#define EXYNOS_4x12_URSTCON_OTG_PHYLINK BIT(2)
	#define EXYNOS_4x12_URSTCON_HOST_PHY BIT(3)
	/* The following bit defines are presented in the
	* order taken from the Exynos4412 reference manual.
	*
	* During experiments with the hardware and debugging
	* it was determined that the hardware behaves contrary
	* to the manual.
	*
	* The following bit values were chaned accordingly to the
	* results of real hardware experiments.
	*/
	#define EXYNOS_4x12_URSTCON_PHY1 BIT(4)
	#define EXYNOS_4x12_URSTCON_HSIC0 BIT(6)
	#define EXYNOS_4x12_URSTCON_HSIC1 BIT(5)
	#define EXYNOS_4x12_URSTCON_HOST_LINK_ALL BIT(7)
	#define EXYNOS_4x12_URSTCON_HOST_LINK_P0 BIT(10)
	#define EXYNOS_4x12_URSTCON_HOST_LINK_P1 BIT(9)
	#define EXYNOS_4x12_URSTCON_HOST_LINK_P2 BIT(8)

	/* Isolation, configured in the power management unit */
	#define EXYNOS_4x12_USB_ISOL_OFFSET 0x704
	#define EXYNOS_4x12_USB_ISOL_OTG BIT(0)
	#define EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET 0x708
	#define EXYNOS_4x12_USB_ISOL_HSIC0 BIT(0)
	#define EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET 0x70c
	#define EXYNOS_4x12_USB_ISOL_HSIC1 BIT(0)

	/* Mode switching SUB Device <-> Host */
	#define EXYNOS_4x12_MODE_SWITCH_OFFSET 0x21c
	#define EXYNOS_4x12_MODE_SWITCH_MASK 1
	#define EXYNOS_4x12_MODE_SWITCH_DEVICE 0
	#define EXYNOS_4x12_MODE_SWITCH_HOST 1

	enum exynos4x12_phy_id {
	EXYNOS4x12_DEVICE,
	EXYNOS4x12_HOST,
	EXYNOS4x12_HSIC0,
	EXYNOS4x12_HSIC1,
	EXYNOS4x12_NUM_PHYS,
	};

	/*
	* exynos4x12_rate_to_clk() converts the supplied clock rate to the value that
	* can be written to the phy register.
	*/
	static int exynos4x12_rate_to_clk(unsigned long rate, u32 *reg)
	{
	/* EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK */

	switch (rate) {
	case 9600 * KHZ:
	*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6;
	break;
	case 10 * MHZ:
	*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ;
	break;
	case 12 * MHZ:
	*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ;
	break;
	case 19200 * KHZ:
	*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2;
	break;
	case 20 * MHZ:
	*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ;
	break;
	case 24 * MHZ:
	*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ;
	break;
	case 50 * MHZ:
	*reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ;
	break;
	default:
	return -EINVAL;
	}

	return 0;
	}

	static void exynos4x12_isol(struct samsung_usb2_phy_instance *inst, bool on)
	{
	struct samsung_usb2_phy_driver *drv = inst->drv;
	u32 offset;
	u32 mask;

	switch (inst->cfg->id) {
	case EXYNOS4x12_DEVICE:
	case EXYNOS4x12_HOST:
	offset = EXYNOS_4x12_USB_ISOL_OFFSET;
	mask = EXYNOS_4x12_USB_ISOL_OTG;
	break;
	case EXYNOS4x12_HSIC0:
	offset = EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET;
	mask = EXYNOS_4x12_USB_ISOL_HSIC0;
	break;
	case EXYNOS4x12_HSIC1:
	offset = EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET;
	mask = EXYNOS_4x12_USB_ISOL_HSIC1;
	break;
	default:
	return;
	};

	regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask);
	}

	static void exynos4x12_setup_clk(struct samsung_usb2_phy_instance *inst)
	{
	struct samsung_usb2_phy_driver *drv = inst->drv;
	u32 clk;

	clk = readl(drv->reg_phy + EXYNOS_4x12_UPHYCLK);
	clk &= ~EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK;

	if (drv->cfg->has_refclk_sel)
	clk = EXYNOS_3250_UPHYCLK_REFCLKSEL;

	clk \|= drv->ref_reg_val << EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET;
	clk \|= EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON;
	writel(clk, drv->reg_phy + EXYNOS_4x12_UPHYCLK);
	}

	static void exynos4x12_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on)
	{
	struct samsung_usb2_phy_driver *drv = inst->drv;
	u32 rstbits = 0;
	u32 phypwr = 0;
	u32 rst;
	u32 pwr;

	switch (inst->cfg->id) {
	case EXYNOS4x12_DEVICE:
	phypwr = EXYNOS_4x12_UPHYPWR_PHY0;
	rstbits = EXYNOS_4x12_URSTCON_PHY0;
	break;
	case EXYNOS4x12_HOST:
	phypwr = EXYNOS_4x12_UPHYPWR_PHY1;
	rstbits = EXYNOS_4x12_URSTCON_HOST_PHY \|
	EXYNOS_4x12_URSTCON_PHY1 \|
	EXYNOS_4x12_URSTCON_HOST_LINK_P0;
	break;
	case EXYNOS4x12_HSIC0:
	phypwr = EXYNOS_4x12_UPHYPWR_HSIC0;
	rstbits = EXYNOS_4x12_URSTCON_HSIC0 \|
	EXYNOS_4x12_URSTCON_HOST_LINK_P1;
	break;
	case EXYNOS4x12_HSIC1:
	phypwr = EXYNOS_4x12_UPHYPWR_HSIC1;
	rstbits = EXYNOS_4x12_URSTCON_HSIC1 \|
	EXYNOS_4x12_URSTCON_HOST_LINK_P1;
	break;
	};

	if (on) {
	pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR);
	pwr &= ~phypwr;
	writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR);

	rst = readl(drv->reg_phy + EXYNOS_4x12_UPHYRST);
	rst \|= rstbits;
	writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST);
	udelay(10);
	rst &= ~rstbits;
	writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST);
	/* The following delay is necessary for the reset sequence to be
	* completed */
	udelay(80);
	} else {
	pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR);
	pwr \|= phypwr;
	writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR);
	}
	}

	static void exynos4x12_power_on_int(struct samsung_usb2_phy_instance *inst)
	{
	if (inst->int_cnt++ > 0)
	return;

	exynos4x12_setup_clk(inst);
	exynos4x12_isol(inst, 0);
	exynos4x12_phy_pwr(inst, 1);
	}

	static int exynos4x12_power_on(struct samsung_usb2_phy_instance *inst)
	{
	struct samsung_usb2_phy_driver *drv = inst->drv;

	if (inst->ext_cnt++ > 0)
	return 0;

	if (inst->cfg->id == EXYNOS4x12_HOST) {
	regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET,
	EXYNOS_4x12_MODE_SWITCH_MASK,
	EXYNOS_4x12_MODE_SWITCH_HOST);
	exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]);
	}

	if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch)
	regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET,
	EXYNOS_4x12_MODE_SWITCH_MASK,
	EXYNOS_4x12_MODE_SWITCH_DEVICE);

	if (inst->cfg->id == EXYNOS4x12_HSIC0 \|\|
	inst->cfg->id == EXYNOS4x12_HSIC1) {
	exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_DEVICE]);
	exynos4x12_power_on_int(&drv->instances[EXYNOS4x12_HOST]);
	}

	exynos4x12_power_on_int(inst);

	return 0;
	}

	static void exynos4x12_power_off_int(struct samsung_usb2_phy_instance *inst)
	{
	if (inst->int_cnt-- > 1)
	return;

	exynos4x12_isol(inst, 1);
	exynos4x12_phy_pwr(inst, 0);
	}

	static int exynos4x12_power_off(struct samsung_usb2_phy_instance *inst)
	{
	struct samsung_usb2_phy_driver *drv = inst->drv;

	if (inst->ext_cnt-- > 1)
	return 0;

	if (inst->cfg->id == EXYNOS4x12_DEVICE && drv->cfg->has_mode_switch)
	regmap_update_bits(drv->reg_sys, EXYNOS_4x12_MODE_SWITCH_OFFSET,
	EXYNOS_4x12_MODE_SWITCH_MASK,
	EXYNOS_4x12_MODE_SWITCH_HOST);

	if (inst->cfg->id == EXYNOS4x12_HOST)
	exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]);

	if (inst->cfg->id == EXYNOS4x12_HSIC0 \|\|
	inst->cfg->id == EXYNOS4x12_HSIC1) {
	exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_DEVICE]);
	exynos4x12_power_off_int(&drv->instances[EXYNOS4x12_HOST]);
	}

	exynos4x12_power_off_int(inst);

	return 0;
	}


	static const struct samsung_usb2_common_phy exynos4x12_phys[] = {
	{
	.label = "device",
	.id = EXYNOS4x12_DEVICE,
	.power_on = exynos4x12_power_on,
	.power_off = exynos4x12_power_off,
	},
	{
	.label = "host",
	.id = EXYNOS4x12_HOST,
	.power_on = exynos4x12_power_on,
	.power_off = exynos4x12_power_off,
	},
	{
	.label = "hsic0",
	.id = EXYNOS4x12_HSIC0,
	.power_on = exynos4x12_power_on,
	.power_off = exynos4x12_power_off,
	},
	{
	.label = "hsic1",
	.id = EXYNOS4x12_HSIC1,
	.power_on = exynos4x12_power_on,
	.power_off = exynos4x12_power_off,
	},
	};

	const struct samsung_usb2_phy_config exynos3250_usb2_phy_config = {
	.has_refclk_sel = 1,
	.num_phys = 1,
	.phys = exynos4x12_phys,
	.rate_to_clk = exynos4x12_rate_to_clk,
	};

	const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config = {
	.has_mode_switch = 1,
	.num_phys = EXYNOS4x12_NUM_PHYS,
	.phys = exynos4x12_phys,
	.rate_to_clk = exynos4x12_rate_to_clk,
	};