|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Driver for Linear Technology LTC2471 and LTC2473 voltage monitors | 
|  | * The LTC2473 is identical to the 2471, but reports a differential signal. | 
|  | * | 
|  | * Copyright (C) 2017 Topic Embedded Products | 
|  | * Author: Mike Looijmans <[email protected]> | 
|  | */ | 
|  |  | 
|  | #include <linux/err.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/iio/iio.h> | 
|  | #include <linux/iio/sysfs.h> | 
|  |  | 
|  | enum ltc2471_chips { | 
|  | ltc2471, | 
|  | ltc2473, | 
|  | }; | 
|  |  | 
|  | struct ltc2471_data { | 
|  | struct i2c_client *client; | 
|  | }; | 
|  |  | 
|  | /* Reference voltage is 1.25V */ | 
|  | #define LTC2471_VREF 1250 | 
|  |  | 
|  | /* Read two bytes from the I2C bus to obtain the ADC result */ | 
|  | static int ltc2471_get_value(struct i2c_client *client) | 
|  | { | 
|  | int ret; | 
|  | __be16 buf; | 
|  |  | 
|  | ret = i2c_master_recv(client, (char *)&buf, sizeof(buf)); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | if (ret != sizeof(buf)) | 
|  | return -EIO; | 
|  |  | 
|  | /* MSB first */ | 
|  | return be16_to_cpu(buf); | 
|  | } | 
|  |  | 
|  | static int ltc2471_read_raw(struct iio_dev *indio_dev, | 
|  | struct iio_chan_spec const *chan, | 
|  | int *val, int *val2, long info) | 
|  | { | 
|  | struct ltc2471_data *data = iio_priv(indio_dev); | 
|  | int ret; | 
|  |  | 
|  | switch (info) { | 
|  | case IIO_CHAN_INFO_RAW: | 
|  | ret = ltc2471_get_value(data->client); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | *val = ret; | 
|  | return IIO_VAL_INT; | 
|  |  | 
|  | case IIO_CHAN_INFO_SCALE: | 
|  | if (chan->differential) | 
|  | /* Output ranges from -VREF to +VREF */ | 
|  | *val = 2 * LTC2471_VREF; | 
|  | else | 
|  | /* Output ranges from 0 to VREF */ | 
|  | *val = LTC2471_VREF; | 
|  | *val2 = 16;	/* 16 data bits */ | 
|  | return IIO_VAL_FRACTIONAL_LOG2; | 
|  |  | 
|  | case IIO_CHAN_INFO_OFFSET: | 
|  | /* Only differential chip has this property */ | 
|  | *val = -LTC2471_VREF; | 
|  | return IIO_VAL_INT; | 
|  |  | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static const struct iio_chan_spec ltc2471_channel[] = { | 
|  | { | 
|  | .type = IIO_VOLTAGE, | 
|  | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), | 
|  | .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct iio_chan_spec ltc2473_channel[] = { | 
|  | { | 
|  | .type = IIO_VOLTAGE, | 
|  | .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), | 
|  | .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | | 
|  | BIT(IIO_CHAN_INFO_OFFSET), | 
|  | .differential = 1, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct iio_info ltc2471_info = { | 
|  | .read_raw = ltc2471_read_raw, | 
|  | }; | 
|  |  | 
|  | static int ltc2471_i2c_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct iio_dev *indio_dev; | 
|  | struct ltc2471_data *data; | 
|  | int ret; | 
|  |  | 
|  | if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); | 
|  | if (!indio_dev) | 
|  | return -ENOMEM; | 
|  |  | 
|  | data = iio_priv(indio_dev); | 
|  | data->client = client; | 
|  |  | 
|  | indio_dev->dev.parent = &client->dev; | 
|  | indio_dev->name = id->name; | 
|  | indio_dev->info = <c2471_info; | 
|  | indio_dev->modes = INDIO_DIRECT_MODE; | 
|  | if (id->driver_data == ltc2473) | 
|  | indio_dev->channels = ltc2473_channel; | 
|  | else | 
|  | indio_dev->channels = ltc2471_channel; | 
|  | indio_dev->num_channels = 1; | 
|  |  | 
|  | /* Trigger once to start conversion and check if chip is there */ | 
|  | ret = ltc2471_get_value(client); | 
|  | if (ret < 0) { | 
|  | dev_err(&client->dev, "Cannot read from device.\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return devm_iio_device_register(&client->dev, indio_dev); | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id ltc2471_i2c_id[] = { | 
|  | { "ltc2471", ltc2471 }, | 
|  | { "ltc2473", ltc2473 }, | 
|  | {} | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, ltc2471_i2c_id); | 
|  |  | 
|  | static struct i2c_driver ltc2471_i2c_driver = { | 
|  | .driver = { | 
|  | .name = "ltc2471", | 
|  | }, | 
|  | .probe    = ltc2471_i2c_probe, | 
|  | .id_table = ltc2471_i2c_id, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(ltc2471_i2c_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("LTC2471/LTC2473 ADC driver"); | 
|  | MODULE_AUTHOR("Topic Embedded Products"); | 
|  | MODULE_LICENSE("GPL v2"); |