|  | /* $Id: interrupt.c,v 1.4.8.3 2001/09/23 22:24:59 kai Exp $ | 
|  | * | 
|  | * Copyright (C) 1996  SpellCaster Telecommunications Inc. | 
|  | * | 
|  | * This software may be used and distributed according to the terms | 
|  | * of the GNU General Public License, incorporated herein by reference. | 
|  | * | 
|  | * For more information, please contact [email protected] or write: | 
|  | * | 
|  | *     SpellCaster Telecommunications Inc. | 
|  | *     5621 Finch Avenue East, Unit #3 | 
|  | *     Scarborough, Ontario  Canada | 
|  | *     M1B 2T9 | 
|  | *     +1 (416) 297-8565 | 
|  | *     +1 (416) 297-6433 Facsimile | 
|  | */ | 
|  |  | 
|  | #include "includes.h" | 
|  | #include "hardware.h" | 
|  | #include "message.h" | 
|  | #include "card.h" | 
|  | #include <linux/interrupt.h> | 
|  |  | 
|  | /* | 
|  | * | 
|  | */ | 
|  | irqreturn_t interrupt_handler(int dummy, void *card_inst) | 
|  | { | 
|  |  | 
|  | RspMessage rcvmsg; | 
|  | int channel; | 
|  | int card = (int)(unsigned long) card_inst; | 
|  |  | 
|  | if(!IS_VALID_CARD(card)) { | 
|  | pr_debug("Invalid param: %d is not a valid card id\n", card); | 
|  | return IRQ_NONE; | 
|  | } | 
|  |  | 
|  | pr_debug("%s: Entered Interrupt handler\n", | 
|  | sc_adapter[card]->devicename); | 
|  |  | 
|  | /* | 
|  | * Pull all of the waiting messages off the response queue | 
|  | */ | 
|  | while (!receivemessage(card, &rcvmsg)) { | 
|  | /* | 
|  | * Push the message to the adapter structure for | 
|  | * send_and_receive to snoop | 
|  | */ | 
|  | if(sc_adapter[card]->want_async_messages) | 
|  | memcpy(&(sc_adapter[card]->async_msg), | 
|  | &rcvmsg, sizeof(RspMessage)); | 
|  |  | 
|  | channel = (unsigned int) rcvmsg.phy_link_no; | 
|  |  | 
|  | /* | 
|  | * Trap Invalid request messages | 
|  | */ | 
|  | if(IS_CM_MESSAGE(rcvmsg, 0, 0, Invalid)) { | 
|  | pr_debug("%s: Invalid request Message, rsp_status = %d\n", | 
|  | sc_adapter[card]->devicename, | 
|  | rcvmsg.rsp_status); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check for a linkRead message | 
|  | */ | 
|  | if (IS_CE_MESSAGE(rcvmsg, Lnk, 1, Read)) | 
|  | { | 
|  | pr_debug("%s: Received packet 0x%x bytes long at 0x%lx\n", | 
|  | sc_adapter[card]->devicename, | 
|  | rcvmsg.msg_data.response.msg_len, | 
|  | rcvmsg.msg_data.response.buff_offset); | 
|  | rcvpkt(card, &rcvmsg); | 
|  | continue; | 
|  |  | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Handle a write acknoledgement | 
|  | */ | 
|  | if(IS_CE_MESSAGE(rcvmsg, Lnk, 1, Write)) { | 
|  | pr_debug("%s: Packet Send ACK on channel %d\n", | 
|  | sc_adapter[card]->devicename, | 
|  | rcvmsg.phy_link_no); | 
|  | sc_adapter[card]->channel[rcvmsg.phy_link_no-1].free_sendbufs++; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Handle a connection message | 
|  | */ | 
|  | if (IS_CE_MESSAGE(rcvmsg, Phy, 1, Connect)) | 
|  | { | 
|  | unsigned int callid; | 
|  | setup_parm setup; | 
|  | pr_debug("%s: Connect message: line %d: status %d: cause 0x%x\n", | 
|  | sc_adapter[card]->devicename, | 
|  | rcvmsg.phy_link_no, | 
|  | rcvmsg.rsp_status, | 
|  | rcvmsg.msg_data.byte_array[2]); | 
|  |  | 
|  | memcpy(&callid,rcvmsg.msg_data.byte_array,sizeof(int)); | 
|  | if(callid>=0x8000 && callid<=0xFFFF) | 
|  | { | 
|  | pr_debug("%s: Got Dial-Out Rsp\n", | 
|  | sc_adapter[card]->devicename); | 
|  | indicate_status(card, ISDN_STAT_DCONN, | 
|  | (unsigned long)rcvmsg.phy_link_no-1,NULL); | 
|  |  | 
|  | } | 
|  | else if(callid>=0x0000 && callid<=0x7FFF) | 
|  | { | 
|  | int len; | 
|  |  | 
|  | pr_debug("%s: Got Incoming Call\n", | 
|  | sc_adapter[card]->devicename); | 
|  | len = strlcpy(setup.phone, &(rcvmsg.msg_data.byte_array[4]), | 
|  | sizeof(setup.phone)); | 
|  | if (len >= sizeof(setup.phone)) | 
|  | continue; | 
|  | len = strlcpy(setup.eazmsn, | 
|  | sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn, | 
|  | sizeof(setup.eazmsn)); | 
|  | if (len >= sizeof(setup.eazmsn)) | 
|  | continue; | 
|  | setup.si1 = 7; | 
|  | setup.si2 = 0; | 
|  | setup.plan = 0; | 
|  | setup.screen = 0; | 
|  |  | 
|  | indicate_status(card, ISDN_STAT_ICALL,(unsigned long)rcvmsg.phy_link_no-1,(char *)&setup); | 
|  | indicate_status(card, ISDN_STAT_DCONN,(unsigned long)rcvmsg.phy_link_no-1,NULL); | 
|  | } | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Handle a disconnection message | 
|  | */ | 
|  | if (IS_CE_MESSAGE(rcvmsg, Phy, 1, Disconnect)) | 
|  | { | 
|  | pr_debug("%s: disconnect message: line %d: status %d: cause 0x%x\n", | 
|  | sc_adapter[card]->devicename, | 
|  | rcvmsg.phy_link_no, | 
|  | rcvmsg.rsp_status, | 
|  | rcvmsg.msg_data.byte_array[2]); | 
|  |  | 
|  | indicate_status(card, ISDN_STAT_BHUP,(unsigned long)rcvmsg.phy_link_no-1,NULL); | 
|  | indicate_status(card, ISDN_STAT_DHUP,(unsigned long)rcvmsg.phy_link_no-1,NULL); | 
|  | continue; | 
|  |  | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Handle a startProc engine up message | 
|  | */ | 
|  | if (IS_CM_MESSAGE(rcvmsg, 5, 0, MiscEngineUp)) { | 
|  | pr_debug("%s: Received EngineUp message\n", | 
|  | sc_adapter[card]->devicename); | 
|  | sc_adapter[card]->EngineUp = 1; | 
|  | sendmessage(card, CEPID,ceReqTypeCall,ceReqClass0,ceReqCallGetMyNumber,1,0,NULL); | 
|  | sendmessage(card, CEPID,ceReqTypeCall,ceReqClass0,ceReqCallGetMyNumber,2,0,NULL); | 
|  | init_timer(&sc_adapter[card]->stat_timer); | 
|  | sc_adapter[card]->stat_timer.function = check_phystat; | 
|  | sc_adapter[card]->stat_timer.data = card; | 
|  | sc_adapter[card]->stat_timer.expires = jiffies + CHECKSTAT_TIME; | 
|  | add_timer(&sc_adapter[card]->stat_timer); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Start proc response | 
|  | */ | 
|  | if (IS_CM_MESSAGE(rcvmsg, 2, 0, StartProc)) { | 
|  | pr_debug("%s: StartProc Response Status %d\n", | 
|  | sc_adapter[card]->devicename, | 
|  | rcvmsg.rsp_status); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Handle a GetMyNumber Rsp | 
|  | */ | 
|  | if (IS_CE_MESSAGE(rcvmsg,Call,0,GetMyNumber)){ | 
|  | strlcpy(sc_adapter[card]->channel[rcvmsg.phy_link_no - 1].dn, | 
|  | rcvmsg.msg_data.byte_array, | 
|  | sizeof(rcvmsg.msg_data.byte_array)); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * PhyStatus response | 
|  | */ | 
|  | if(IS_CE_MESSAGE(rcvmsg, Phy, 2, Status)) { | 
|  | unsigned int b1stat, b2stat; | 
|  |  | 
|  | /* | 
|  | * Covert the message data to the adapter->phystat code | 
|  | */ | 
|  | b1stat = (unsigned int) rcvmsg.msg_data.byte_array[0]; | 
|  | b2stat = (unsigned int) rcvmsg.msg_data.byte_array[1]; | 
|  |  | 
|  | sc_adapter[card]->nphystat = (b2stat >> 8) | b1stat; /* endian?? */ | 
|  | pr_debug("%s: PhyStat is 0x%2x\n", | 
|  | sc_adapter[card]->devicename, | 
|  | sc_adapter[card]->nphystat); | 
|  | continue; | 
|  | } | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Handle a GetFramFormat | 
|  | */ | 
|  | if(IS_CE_MESSAGE(rcvmsg, Call, 0, GetFrameFormat)) { | 
|  | if(rcvmsg.msg_data.byte_array[0] != HDLC_PROTO) { | 
|  | unsigned int proto = HDLC_PROTO; | 
|  | /* | 
|  | * Set board format to HDLC if it wasn't already | 
|  | */ | 
|  | pr_debug("%s: current frame format: 0x%x, will change to HDLC\n", | 
|  | sc_adapter[card]->devicename, | 
|  | rcvmsg.msg_data.byte_array[0]); | 
|  | sendmessage(card, CEPID, ceReqTypeCall, | 
|  | ceReqClass0, | 
|  | ceReqCallSetFrameFormat, | 
|  | (unsigned char) channel +1, | 
|  | 1,&proto); | 
|  | } | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Hmm... | 
|  | */ | 
|  | pr_debug("%s: Received unhandled message (%d,%d,%d) link %d\n", | 
|  | sc_adapter[card]->devicename, | 
|  | rcvmsg.type, rcvmsg.class, rcvmsg.code, | 
|  | rcvmsg.phy_link_no); | 
|  |  | 
|  | }	/* while */ | 
|  |  | 
|  | pr_debug("%s: Exiting Interrupt Handler\n", | 
|  | sc_adapter[card]->devicename); | 
|  | return IRQ_HANDLED; | 
|  | } |