|  | // SPDX-License-Identifier: GPL-2.0-only | 
|  | /* | 
|  | * Copyright (C) 2007-2012 Siemens AG | 
|  | * | 
|  | * Written by: | 
|  | * Alexander Smirnov <[email protected]> | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/netdevice.h> | 
|  |  | 
|  | #include <net/netlink.h> | 
|  | #include <net/nl802154.h> | 
|  | #include <net/mac802154.h> | 
|  | #include <net/ieee802154_netdev.h> | 
|  | #include <net/route.h> | 
|  | #include <net/cfg802154.h> | 
|  |  | 
|  | #include "ieee802154_i.h" | 
|  | #include "cfg.h" | 
|  |  | 
|  | static void ieee802154_tasklet_handler(struct tasklet_struct *t) | 
|  | { | 
|  | struct ieee802154_local *local = from_tasklet(local, t, tasklet); | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | while ((skb = skb_dequeue(&local->skb_queue))) { | 
|  | switch (skb->pkt_type) { | 
|  | case IEEE802154_RX_MSG: | 
|  | /* Clear skb->pkt_type in order to not confuse kernel | 
|  | * netstack. | 
|  | */ | 
|  | skb->pkt_type = 0; | 
|  | ieee802154_rx(local, skb); | 
|  | break; | 
|  | default: | 
|  | WARN(1, "mac802154: Packet is of unknown type %d\n", | 
|  | skb->pkt_type); | 
|  | kfree_skb(skb); | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | struct ieee802154_hw * | 
|  | ieee802154_alloc_hw(size_t priv_data_len, const struct ieee802154_ops *ops) | 
|  | { | 
|  | struct wpan_phy *phy; | 
|  | struct ieee802154_local *local; | 
|  | size_t priv_size; | 
|  |  | 
|  | if (WARN_ON(!ops || !(ops->xmit_async || ops->xmit_sync) || !ops->ed || | 
|  | !ops->start || !ops->stop || !ops->set_channel)) | 
|  | return NULL; | 
|  |  | 
|  | /* Ensure 32-byte alignment of our private data and hw private data. | 
|  | * We use the wpan_phy priv data for both our ieee802154_local and for | 
|  | * the driver's private data | 
|  | * | 
|  | * in memory it'll be like this: | 
|  | * | 
|  | * +-------------------------+ | 
|  | * | struct wpan_phy         | | 
|  | * +-------------------------+ | 
|  | * | struct ieee802154_local | | 
|  | * +-------------------------+ | 
|  | * | driver's private data   | | 
|  | * +-------------------------+ | 
|  | * | 
|  | * Due to ieee802154 layer isn't aware of driver and MAC structures, | 
|  | * so lets align them here. | 
|  | */ | 
|  |  | 
|  | priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len; | 
|  |  | 
|  | phy = wpan_phy_new(&mac802154_config_ops, priv_size); | 
|  | if (!phy) { | 
|  | pr_err("failure to allocate master IEEE802.15.4 device\n"); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | phy->privid = mac802154_wpan_phy_privid; | 
|  |  | 
|  | local = wpan_phy_priv(phy); | 
|  | local->phy = phy; | 
|  | local->hw.phy = local->phy; | 
|  | local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN); | 
|  | local->ops = ops; | 
|  |  | 
|  | INIT_LIST_HEAD(&local->interfaces); | 
|  | mutex_init(&local->iflist_mtx); | 
|  |  | 
|  | tasklet_setup(&local->tasklet, ieee802154_tasklet_handler); | 
|  |  | 
|  | skb_queue_head_init(&local->skb_queue); | 
|  |  | 
|  | INIT_WORK(&local->tx_work, ieee802154_xmit_worker); | 
|  |  | 
|  | /* init supported flags with 802.15.4 default ranges */ | 
|  | phy->supported.max_minbe = 8; | 
|  | phy->supported.min_maxbe = 3; | 
|  | phy->supported.max_maxbe = 8; | 
|  | phy->supported.min_frame_retries = 0; | 
|  | phy->supported.max_frame_retries = 7; | 
|  | phy->supported.max_csma_backoffs = 5; | 
|  | phy->supported.lbt = NL802154_SUPPORTED_BOOL_FALSE; | 
|  |  | 
|  | /* always supported */ | 
|  | phy->supported.iftypes = BIT(NL802154_IFTYPE_NODE); | 
|  |  | 
|  | return &local->hw; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee802154_alloc_hw); | 
|  |  | 
|  | void ieee802154_configure_durations(struct wpan_phy *phy) | 
|  | { | 
|  | u32 duration = 0; | 
|  |  | 
|  | switch (phy->current_page) { | 
|  | case 0: | 
|  | if (BIT(phy->current_channel) & 0x1) | 
|  | /* 868 MHz BPSK 802.15.4-2003: 20 ksym/s */ | 
|  | duration = 50 * NSEC_PER_USEC; | 
|  | else if (BIT(phy->current_channel) & 0x7FE) | 
|  | /* 915 MHz BPSK	802.15.4-2003: 40 ksym/s */ | 
|  | duration = 25 * NSEC_PER_USEC; | 
|  | else if (BIT(phy->current_channel) & 0x7FFF800) | 
|  | /* 2400 MHz O-QPSK 802.15.4-2006: 62.5 ksym/s */ | 
|  | duration = 16 * NSEC_PER_USEC; | 
|  | break; | 
|  | case 2: | 
|  | if (BIT(phy->current_channel) & 0x1) | 
|  | /* 868 MHz O-QPSK 802.15.4-2006: 25 ksym/s */ | 
|  | duration = 40 * NSEC_PER_USEC; | 
|  | else if (BIT(phy->current_channel) & 0x7FE) | 
|  | /* 915 MHz O-QPSK 802.15.4-2006: 62.5 ksym/s */ | 
|  | duration = 16 * NSEC_PER_USEC; | 
|  | break; | 
|  | case 3: | 
|  | if (BIT(phy->current_channel) & 0x3FFF) | 
|  | /* 2.4 GHz CSS 802.15.4a-2007: 1/6 Msym/s */ | 
|  | duration = 6 * NSEC_PER_USEC; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (!duration) { | 
|  | pr_debug("Unknown PHY symbol duration\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | phy->symbol_duration = duration; | 
|  | phy->lifs_period = (IEEE802154_LIFS_PERIOD * phy->symbol_duration) / NSEC_PER_SEC; | 
|  | phy->sifs_period = (IEEE802154_SIFS_PERIOD * phy->symbol_duration) / NSEC_PER_SEC; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee802154_configure_durations); | 
|  |  | 
|  | void ieee802154_free_hw(struct ieee802154_hw *hw) | 
|  | { | 
|  | struct ieee802154_local *local = hw_to_local(hw); | 
|  |  | 
|  | BUG_ON(!list_empty(&local->interfaces)); | 
|  |  | 
|  | mutex_destroy(&local->iflist_mtx); | 
|  |  | 
|  | wpan_phy_free(local->phy); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee802154_free_hw); | 
|  |  | 
|  | static void ieee802154_setup_wpan_phy_pib(struct wpan_phy *wpan_phy) | 
|  | { | 
|  | /* TODO warn on empty symbol_duration | 
|  | * Should be done when all drivers sets this value. | 
|  | */ | 
|  |  | 
|  | wpan_phy->lifs_period = | 
|  | (IEEE802154_LIFS_PERIOD * wpan_phy->symbol_duration) / 1000; | 
|  | wpan_phy->sifs_period = | 
|  | (IEEE802154_SIFS_PERIOD * wpan_phy->symbol_duration) / 1000; | 
|  | } | 
|  |  | 
|  | int ieee802154_register_hw(struct ieee802154_hw *hw) | 
|  | { | 
|  | struct ieee802154_local *local = hw_to_local(hw); | 
|  | struct net_device *dev; | 
|  | int rc = -ENOSYS; | 
|  |  | 
|  | local->workqueue = | 
|  | create_singlethread_workqueue(wpan_phy_name(local->phy)); | 
|  | if (!local->workqueue) { | 
|  | rc = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | hrtimer_init(&local->ifs_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); | 
|  | local->ifs_timer.function = ieee802154_xmit_ifs_timer; | 
|  |  | 
|  | wpan_phy_set_dev(local->phy, local->hw.parent); | 
|  |  | 
|  | ieee802154_setup_wpan_phy_pib(local->phy); | 
|  |  | 
|  | ieee802154_configure_durations(local->phy); | 
|  |  | 
|  | if (!(hw->flags & IEEE802154_HW_CSMA_PARAMS)) { | 
|  | local->phy->supported.min_csma_backoffs = 4; | 
|  | local->phy->supported.max_csma_backoffs = 4; | 
|  | local->phy->supported.min_maxbe = 5; | 
|  | local->phy->supported.max_maxbe = 5; | 
|  | local->phy->supported.min_minbe = 3; | 
|  | local->phy->supported.max_minbe = 3; | 
|  | } | 
|  |  | 
|  | if (!(hw->flags & IEEE802154_HW_FRAME_RETRIES)) { | 
|  | local->phy->supported.min_frame_retries = 3; | 
|  | local->phy->supported.max_frame_retries = 3; | 
|  | } | 
|  |  | 
|  | if (hw->flags & IEEE802154_HW_PROMISCUOUS) | 
|  | local->phy->supported.iftypes |= BIT(NL802154_IFTYPE_MONITOR); | 
|  |  | 
|  | rc = wpan_phy_register(local->phy); | 
|  | if (rc < 0) | 
|  | goto out_wq; | 
|  |  | 
|  | rtnl_lock(); | 
|  |  | 
|  | dev = ieee802154_if_add(local, "wpan%d", NET_NAME_ENUM, | 
|  | NL802154_IFTYPE_NODE, | 
|  | cpu_to_le64(0x0000000000000000ULL)); | 
|  | if (IS_ERR(dev)) { | 
|  | rtnl_unlock(); | 
|  | rc = PTR_ERR(dev); | 
|  | goto out_phy; | 
|  | } | 
|  |  | 
|  | rtnl_unlock(); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_phy: | 
|  | wpan_phy_unregister(local->phy); | 
|  | out_wq: | 
|  | destroy_workqueue(local->workqueue); | 
|  | out: | 
|  | return rc; | 
|  | } | 
|  | EXPORT_SYMBOL(ieee802154_register_hw); | 
|  |  | 
|  | void ieee802154_unregister_hw(struct ieee802154_hw *hw) | 
|  | { | 
|  | struct ieee802154_local *local = hw_to_local(hw); | 
|  |  | 
|  | tasklet_kill(&local->tasklet); | 
|  | flush_workqueue(local->workqueue); | 
|  |  | 
|  | rtnl_lock(); | 
|  |  | 
|  | ieee802154_remove_interfaces(local); | 
|  |  | 
|  | rtnl_unlock(); | 
|  |  | 
|  | destroy_workqueue(local->workqueue); | 
|  | wpan_phy_unregister(local->phy); | 
|  | } | 
|  | EXPORT_SYMBOL(ieee802154_unregister_hw); | 
|  |  | 
|  | static int __init ieee802154_init(void) | 
|  | { | 
|  | return ieee802154_iface_init(); | 
|  | } | 
|  |  | 
|  | static void __exit ieee802154_exit(void) | 
|  | { | 
|  | ieee802154_iface_exit(); | 
|  |  | 
|  | rcu_barrier(); | 
|  | } | 
|  |  | 
|  | subsys_initcall(ieee802154_init); | 
|  | module_exit(ieee802154_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("IEEE 802.15.4 subsystem"); | 
|  | MODULE_LICENSE("GPL v2"); |