|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * Simple memory-mapped device MDIO MUX driver | 
|  | * | 
|  | * Author: Timur Tabi <[email protected]> | 
|  | * | 
|  | * Copyright 2012 Freescale Semiconductor, Inc. | 
|  | */ | 
|  |  | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/of_address.h> | 
|  | #include <linux/of_mdio.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/phy.h> | 
|  | #include <linux/mdio-mux.h> | 
|  |  | 
|  | struct mdio_mux_mmioreg_state { | 
|  | void *mux_handle; | 
|  | phys_addr_t phys; | 
|  | unsigned int iosize; | 
|  | unsigned int mask; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * MDIO multiplexing switch function | 
|  | * | 
|  | * This function is called by the mdio-mux layer when it thinks the mdio bus | 
|  | * multiplexer needs to switch. | 
|  | * | 
|  | * 'current_child' is the current value of the mux register (masked via | 
|  | * s->mask). | 
|  | * | 
|  | * 'desired_child' is the value of the 'reg' property of the target child MDIO | 
|  | * node. | 
|  | * | 
|  | * The first time this function is called, current_child == -1. | 
|  | * | 
|  | * If current_child == desired_child, then the mux is already set to the | 
|  | * correct bus. | 
|  | */ | 
|  | static int mdio_mux_mmioreg_switch_fn(int current_child, int desired_child, | 
|  | void *data) | 
|  | { | 
|  | struct mdio_mux_mmioreg_state *s = data; | 
|  |  | 
|  | if (current_child ^ desired_child) { | 
|  | void __iomem *p = ioremap(s->phys, s->iosize); | 
|  | if (!p) | 
|  | return -ENOMEM; | 
|  |  | 
|  | switch (s->iosize) { | 
|  | case sizeof(uint8_t): { | 
|  | uint8_t x, y; | 
|  |  | 
|  | x = ioread8(p); | 
|  | y = (x & ~s->mask) | desired_child; | 
|  | if (x != y) { | 
|  | iowrite8((x & ~s->mask) | desired_child, p); | 
|  | pr_debug("%s: %02x -> %02x\n", __func__, x, y); | 
|  | } | 
|  |  | 
|  | break; | 
|  | } | 
|  | case sizeof(uint16_t): { | 
|  | uint16_t x, y; | 
|  |  | 
|  | x = ioread16(p); | 
|  | y = (x & ~s->mask) | desired_child; | 
|  | if (x != y) { | 
|  | iowrite16((x & ~s->mask) | desired_child, p); | 
|  | pr_debug("%s: %04x -> %04x\n", __func__, x, y); | 
|  | } | 
|  |  | 
|  | break; | 
|  | } | 
|  | case sizeof(uint32_t): { | 
|  | uint32_t x, y; | 
|  |  | 
|  | x = ioread32(p); | 
|  | y = (x & ~s->mask) | desired_child; | 
|  | if (x != y) { | 
|  | iowrite32((x & ~s->mask) | desired_child, p); | 
|  | pr_debug("%s: %08x -> %08x\n", __func__, x, y); | 
|  | } | 
|  |  | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | iounmap(p); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mdio_mux_mmioreg_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct device_node *np2, *np = pdev->dev.of_node; | 
|  | struct mdio_mux_mmioreg_state *s; | 
|  | struct resource res; | 
|  | const __be32 *iprop; | 
|  | int len, ret; | 
|  |  | 
|  | dev_dbg(&pdev->dev, "probing node %pOF\n", np); | 
|  |  | 
|  | s = devm_kzalloc(&pdev->dev, sizeof(*s), GFP_KERNEL); | 
|  | if (!s) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret = of_address_to_resource(np, 0, &res); | 
|  | if (ret) { | 
|  | dev_err(&pdev->dev, "could not obtain memory map for node %pOF\n", | 
|  | np); | 
|  | return ret; | 
|  | } | 
|  | s->phys = res.start; | 
|  |  | 
|  | s->iosize = resource_size(&res); | 
|  | if (s->iosize != sizeof(uint8_t) && | 
|  | s->iosize != sizeof(uint16_t) && | 
|  | s->iosize != sizeof(uint32_t)) { | 
|  | dev_err(&pdev->dev, "only 8/16/32-bit registers are supported\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | iprop = of_get_property(np, "mux-mask", &len); | 
|  | if (!iprop || len != sizeof(uint32_t)) { | 
|  | dev_err(&pdev->dev, "missing or invalid mux-mask property\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  | if (be32_to_cpup(iprop) >= BIT(s->iosize * 8)) { | 
|  | dev_err(&pdev->dev, "only 8/16/32-bit registers are supported\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  | s->mask = be32_to_cpup(iprop); | 
|  |  | 
|  | /* | 
|  | * Verify that the 'reg' property of each child MDIO bus does not | 
|  | * set any bits outside of the 'mask'. | 
|  | */ | 
|  | for_each_available_child_of_node(np, np2) { | 
|  | iprop = of_get_property(np2, "reg", &len); | 
|  | if (!iprop || len != sizeof(uint32_t)) { | 
|  | dev_err(&pdev->dev, "mdio-mux child node %pOF is " | 
|  | "missing a 'reg' property\n", np2); | 
|  | of_node_put(np2); | 
|  | return -ENODEV; | 
|  | } | 
|  | if (be32_to_cpup(iprop) & ~s->mask) { | 
|  | dev_err(&pdev->dev, "mdio-mux child node %pOF has " | 
|  | "a 'reg' value with unmasked bits\n", | 
|  | np2); | 
|  | of_node_put(np2); | 
|  | return -ENODEV; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = mdio_mux_init(&pdev->dev, pdev->dev.of_node, | 
|  | mdio_mux_mmioreg_switch_fn, | 
|  | &s->mux_handle, s, NULL); | 
|  | if (ret) { | 
|  | if (ret != -EPROBE_DEFER) | 
|  | dev_err(&pdev->dev, | 
|  | "failed to register mdio-mux bus %pOF\n", np); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | pdev->dev.platform_data = s; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int mdio_mux_mmioreg_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct mdio_mux_mmioreg_state *s = dev_get_platdata(&pdev->dev); | 
|  |  | 
|  | mdio_mux_uninit(s->mux_handle); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id mdio_mux_mmioreg_match[] = { | 
|  | { | 
|  | .compatible = "mdio-mux-mmioreg", | 
|  | }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, mdio_mux_mmioreg_match); | 
|  |  | 
|  | static struct platform_driver mdio_mux_mmioreg_driver = { | 
|  | .driver = { | 
|  | .name		= "mdio-mux-mmioreg", | 
|  | .of_match_table = mdio_mux_mmioreg_match, | 
|  | }, | 
|  | .probe		= mdio_mux_mmioreg_probe, | 
|  | .remove		= mdio_mux_mmioreg_remove, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(mdio_mux_mmioreg_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Timur Tabi <[email protected]>"); | 
|  | MODULE_DESCRIPTION("Memory-mapped device MDIO MUX driver"); | 
|  | MODULE_LICENSE("GPL v2"); |