|  | // SPDX-License-Identifier: ISC | 
|  | /* | 
|  | * Copyright (c) 2005-2011 Atheros Communications Inc. | 
|  | * Copyright (c) 2011-2017 Qualcomm Atheros, Inc. | 
|  | * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. | 
|  | */ | 
|  |  | 
|  | #include "mac.h" | 
|  |  | 
|  | #include <net/cfg80211.h> | 
|  | #include <net/mac80211.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/of.h> | 
|  |  | 
|  | #include "hif.h" | 
|  | #include "core.h" | 
|  | #include "debug.h" | 
|  | #include "wmi.h" | 
|  | #include "htt.h" | 
|  | #include "txrx.h" | 
|  | #include "testmode.h" | 
|  | #include "wmi-tlv.h" | 
|  | #include "wmi-ops.h" | 
|  | #include "wow.h" | 
|  |  | 
|  | /*********/ | 
|  | /* Rates */ | 
|  | /*********/ | 
|  |  | 
|  | static struct ieee80211_rate ath10k_rates[] = { | 
|  | { .bitrate = 10, | 
|  | .hw_value = ATH10K_HW_RATE_CCK_LP_1M }, | 
|  | { .bitrate = 20, | 
|  | .hw_value = ATH10K_HW_RATE_CCK_LP_2M, | 
|  | .hw_value_short = ATH10K_HW_RATE_CCK_SP_2M, | 
|  | .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | 
|  | { .bitrate = 55, | 
|  | .hw_value = ATH10K_HW_RATE_CCK_LP_5_5M, | 
|  | .hw_value_short = ATH10K_HW_RATE_CCK_SP_5_5M, | 
|  | .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | 
|  | { .bitrate = 110, | 
|  | .hw_value = ATH10K_HW_RATE_CCK_LP_11M, | 
|  | .hw_value_short = ATH10K_HW_RATE_CCK_SP_11M, | 
|  | .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | 
|  |  | 
|  | { .bitrate = 60, .hw_value = ATH10K_HW_RATE_OFDM_6M }, | 
|  | { .bitrate = 90, .hw_value = ATH10K_HW_RATE_OFDM_9M }, | 
|  | { .bitrate = 120, .hw_value = ATH10K_HW_RATE_OFDM_12M }, | 
|  | { .bitrate = 180, .hw_value = ATH10K_HW_RATE_OFDM_18M }, | 
|  | { .bitrate = 240, .hw_value = ATH10K_HW_RATE_OFDM_24M }, | 
|  | { .bitrate = 360, .hw_value = ATH10K_HW_RATE_OFDM_36M }, | 
|  | { .bitrate = 480, .hw_value = ATH10K_HW_RATE_OFDM_48M }, | 
|  | { .bitrate = 540, .hw_value = ATH10K_HW_RATE_OFDM_54M }, | 
|  | }; | 
|  |  | 
|  | static struct ieee80211_rate ath10k_rates_rev2[] = { | 
|  | { .bitrate = 10, | 
|  | .hw_value = ATH10K_HW_RATE_REV2_CCK_LP_1M }, | 
|  | { .bitrate = 20, | 
|  | .hw_value = ATH10K_HW_RATE_REV2_CCK_LP_2M, | 
|  | .hw_value_short = ATH10K_HW_RATE_REV2_CCK_SP_2M, | 
|  | .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | 
|  | { .bitrate = 55, | 
|  | .hw_value = ATH10K_HW_RATE_REV2_CCK_LP_5_5M, | 
|  | .hw_value_short = ATH10K_HW_RATE_REV2_CCK_SP_5_5M, | 
|  | .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | 
|  | { .bitrate = 110, | 
|  | .hw_value = ATH10K_HW_RATE_REV2_CCK_LP_11M, | 
|  | .hw_value_short = ATH10K_HW_RATE_REV2_CCK_SP_11M, | 
|  | .flags = IEEE80211_RATE_SHORT_PREAMBLE }, | 
|  |  | 
|  | { .bitrate = 60, .hw_value = ATH10K_HW_RATE_OFDM_6M }, | 
|  | { .bitrate = 90, .hw_value = ATH10K_HW_RATE_OFDM_9M }, | 
|  | { .bitrate = 120, .hw_value = ATH10K_HW_RATE_OFDM_12M }, | 
|  | { .bitrate = 180, .hw_value = ATH10K_HW_RATE_OFDM_18M }, | 
|  | { .bitrate = 240, .hw_value = ATH10K_HW_RATE_OFDM_24M }, | 
|  | { .bitrate = 360, .hw_value = ATH10K_HW_RATE_OFDM_36M }, | 
|  | { .bitrate = 480, .hw_value = ATH10K_HW_RATE_OFDM_48M }, | 
|  | { .bitrate = 540, .hw_value = ATH10K_HW_RATE_OFDM_54M }, | 
|  | }; | 
|  |  | 
|  | #define ATH10K_MAC_FIRST_OFDM_RATE_IDX 4 | 
|  |  | 
|  | #define ath10k_a_rates (ath10k_rates + ATH10K_MAC_FIRST_OFDM_RATE_IDX) | 
|  | #define ath10k_a_rates_size (ARRAY_SIZE(ath10k_rates) - \ | 
|  | ATH10K_MAC_FIRST_OFDM_RATE_IDX) | 
|  | #define ath10k_g_rates (ath10k_rates + 0) | 
|  | #define ath10k_g_rates_size (ARRAY_SIZE(ath10k_rates)) | 
|  |  | 
|  | #define ath10k_g_rates_rev2 (ath10k_rates_rev2 + 0) | 
|  | #define ath10k_g_rates_rev2_size (ARRAY_SIZE(ath10k_rates_rev2)) | 
|  |  | 
|  | #define ath10k_wmi_legacy_rates ath10k_rates | 
|  |  | 
|  | static bool ath10k_mac_bitrate_is_cck(int bitrate) | 
|  | { | 
|  | switch (bitrate) { | 
|  | case 10: | 
|  | case 20: | 
|  | case 55: | 
|  | case 110: | 
|  | return true; | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static u8 ath10k_mac_bitrate_to_rate(int bitrate) | 
|  | { | 
|  | return DIV_ROUND_UP(bitrate, 5) | | 
|  | (ath10k_mac_bitrate_is_cck(bitrate) ? BIT(7) : 0); | 
|  | } | 
|  |  | 
|  | u8 ath10k_mac_hw_rate_to_idx(const struct ieee80211_supported_band *sband, | 
|  | u8 hw_rate, bool cck) | 
|  | { | 
|  | const struct ieee80211_rate *rate; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < sband->n_bitrates; i++) { | 
|  | rate = &sband->bitrates[i]; | 
|  |  | 
|  | if (ath10k_mac_bitrate_is_cck(rate->bitrate) != cck) | 
|  | continue; | 
|  |  | 
|  | if (rate->hw_value == hw_rate) | 
|  | return i; | 
|  | else if (rate->flags & IEEE80211_RATE_SHORT_PREAMBLE && | 
|  | rate->hw_value_short == hw_rate) | 
|  | return i; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | u8 ath10k_mac_bitrate_to_idx(const struct ieee80211_supported_band *sband, | 
|  | u32 bitrate) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < sband->n_bitrates; i++) | 
|  | if (sband->bitrates[i].bitrate == bitrate) | 
|  | return i; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_get_rate_hw_value(int bitrate) | 
|  | { | 
|  | int i; | 
|  | u8 hw_value_prefix = 0; | 
|  |  | 
|  | if (ath10k_mac_bitrate_is_cck(bitrate)) | 
|  | hw_value_prefix = WMI_RATE_PREAMBLE_CCK << 6; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(ath10k_rates); i++) { | 
|  | if (ath10k_rates[i].bitrate == bitrate) | 
|  | return hw_value_prefix | ath10k_rates[i].hw_value; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_get_max_vht_mcs_map(u16 mcs_map, int nss) | 
|  | { | 
|  | switch ((mcs_map >> (2 * nss)) & 0x3) { | 
|  | case IEEE80211_VHT_MCS_SUPPORT_0_7: return BIT(8) - 1; | 
|  | case IEEE80211_VHT_MCS_SUPPORT_0_8: return BIT(9) - 1; | 
|  | case IEEE80211_VHT_MCS_SUPPORT_0_9: return BIT(10) - 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u32 | 
|  | ath10k_mac_max_ht_nss(const u8 ht_mcs_mask[IEEE80211_HT_MCS_MASK_LEN]) | 
|  | { | 
|  | int nss; | 
|  |  | 
|  | for (nss = IEEE80211_HT_MCS_MASK_LEN - 1; nss >= 0; nss--) | 
|  | if (ht_mcs_mask[nss]) | 
|  | return nss + 1; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static u32 | 
|  | ath10k_mac_max_vht_nss(const u16 vht_mcs_mask[NL80211_VHT_NSS_MAX]) | 
|  | { | 
|  | int nss; | 
|  |  | 
|  | for (nss = NL80211_VHT_NSS_MAX - 1; nss >= 0; nss--) | 
|  | if (vht_mcs_mask[nss]) | 
|  | return nss + 1; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | int ath10k_mac_ext_resource_config(struct ath10k *ar, u32 val) | 
|  | { | 
|  | enum wmi_host_platform_type platform_type; | 
|  | int ret; | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_TX_MODE_DYNAMIC, ar->wmi.svc_map)) | 
|  | platform_type = WMI_HOST_PLATFORM_LOW_PERF; | 
|  | else | 
|  | platform_type = WMI_HOST_PLATFORM_HIGH_PERF; | 
|  |  | 
|  | ret = ath10k_wmi_ext_resource_config(ar, platform_type, val); | 
|  |  | 
|  | if (ret && ret != -EOPNOTSUPP) { | 
|  | ath10k_warn(ar, "failed to configure ext resource: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /**********/ | 
|  | /* Crypto */ | 
|  | /**********/ | 
|  |  | 
|  | static int ath10k_send_key(struct ath10k_vif *arvif, | 
|  | struct ieee80211_key_conf *key, | 
|  | enum set_key_cmd cmd, | 
|  | const u8 *macaddr, u32 flags) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | struct wmi_vdev_install_key_arg arg = { | 
|  | .vdev_id = arvif->vdev_id, | 
|  | .key_idx = key->keyidx, | 
|  | .key_len = key->keylen, | 
|  | .key_data = key->key, | 
|  | .key_flags = flags, | 
|  | .macaddr = macaddr, | 
|  | }; | 
|  |  | 
|  | lockdep_assert_held(&arvif->ar->conf_mutex); | 
|  |  | 
|  | switch (key->cipher) { | 
|  | case WLAN_CIPHER_SUITE_CCMP: | 
|  | arg.key_cipher = ar->wmi_key_cipher[WMI_CIPHER_AES_CCM]; | 
|  | key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV_MGMT; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_TKIP: | 
|  | arg.key_cipher = ar->wmi_key_cipher[WMI_CIPHER_TKIP]; | 
|  | arg.key_txmic_len = 8; | 
|  | arg.key_rxmic_len = 8; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_WEP40: | 
|  | case WLAN_CIPHER_SUITE_WEP104: | 
|  | arg.key_cipher = ar->wmi_key_cipher[WMI_CIPHER_WEP]; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_CCMP_256: | 
|  | arg.key_cipher = ar->wmi_key_cipher[WMI_CIPHER_AES_CCM]; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_GCMP: | 
|  | case WLAN_CIPHER_SUITE_GCMP_256: | 
|  | arg.key_cipher = ar->wmi_key_cipher[WMI_CIPHER_AES_GCM]; | 
|  | break; | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_128: | 
|  | case WLAN_CIPHER_SUITE_BIP_GMAC_256: | 
|  | case WLAN_CIPHER_SUITE_BIP_CMAC_256: | 
|  | case WLAN_CIPHER_SUITE_AES_CMAC: | 
|  | WARN_ON(1); | 
|  | return -EINVAL; | 
|  | default: | 
|  | ath10k_warn(ar, "cipher %d is not supported\n", key->cipher); | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | if (test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) | 
|  | key->flags |= IEEE80211_KEY_FLAG_GENERATE_IV; | 
|  |  | 
|  | if (cmd == DISABLE_KEY) { | 
|  | arg.key_cipher = ar->wmi_key_cipher[WMI_CIPHER_NONE]; | 
|  | arg.key_data = NULL; | 
|  | } | 
|  |  | 
|  | return ath10k_wmi_vdev_install_key(arvif->ar, &arg); | 
|  | } | 
|  |  | 
|  | static int ath10k_install_key(struct ath10k_vif *arvif, | 
|  | struct ieee80211_key_conf *key, | 
|  | enum set_key_cmd cmd, | 
|  | const u8 *macaddr, u32 flags) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | int ret; | 
|  | unsigned long time_left; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | reinit_completion(&ar->install_key_done); | 
|  |  | 
|  | if (arvif->nohwcrypt) | 
|  | return 1; | 
|  |  | 
|  | ret = ath10k_send_key(arvif, key, cmd, macaddr, flags); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | time_left = wait_for_completion_timeout(&ar->install_key_done, 3 * HZ); | 
|  | if (time_left == 0) | 
|  | return -ETIMEDOUT; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_install_peer_wep_keys(struct ath10k_vif *arvif, | 
|  | const u8 *addr) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | struct ath10k_peer *peer; | 
|  | int ret; | 
|  | int i; | 
|  | u32 flags; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | if (WARN_ON(arvif->vif->type != NL80211_IFTYPE_AP && | 
|  | arvif->vif->type != NL80211_IFTYPE_ADHOC && | 
|  | arvif->vif->type != NL80211_IFTYPE_MESH_POINT)) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | peer = ath10k_peer_find(ar, arvif->vdev_id, addr); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | if (!peer) | 
|  | return -ENOENT; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(arvif->wep_keys); i++) { | 
|  | if (arvif->wep_keys[i] == NULL) | 
|  | continue; | 
|  |  | 
|  | switch (arvif->vif->type) { | 
|  | case NL80211_IFTYPE_AP: | 
|  | flags = WMI_KEY_PAIRWISE; | 
|  |  | 
|  | if (arvif->def_wep_key_idx == i) | 
|  | flags |= WMI_KEY_TX_USAGE; | 
|  |  | 
|  | ret = ath10k_install_key(arvif, arvif->wep_keys[i], | 
|  | SET_KEY, addr, flags); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | ret = ath10k_install_key(arvif, arvif->wep_keys[i], | 
|  | SET_KEY, addr, | 
|  | WMI_KEY_PAIRWISE); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = ath10k_install_key(arvif, arvif->wep_keys[i], | 
|  | SET_KEY, addr, WMI_KEY_GROUP); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | break; | 
|  | default: | 
|  | WARN_ON(1); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | peer->keys[i] = arvif->wep_keys[i]; | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  | } | 
|  |  | 
|  | /* In some cases (notably with static WEP IBSS with multiple keys) | 
|  | * multicast Tx becomes broken. Both pairwise and groupwise keys are | 
|  | * installed already. Using WMI_KEY_TX_USAGE in different combinations | 
|  | * didn't seem help. Using def_keyid vdev parameter seems to be | 
|  | * effective so use that. | 
|  | * | 
|  | * FIXME: Revisit. Perhaps this can be done in a less hacky way. | 
|  | */ | 
|  | if (arvif->vif->type != NL80211_IFTYPE_ADHOC) | 
|  | return 0; | 
|  |  | 
|  | if (arvif->def_wep_key_idx == -1) | 
|  | return 0; | 
|  |  | 
|  | ret = ath10k_wmi_vdev_set_param(arvif->ar, | 
|  | arvif->vdev_id, | 
|  | arvif->ar->wmi.vdev_param->def_keyid, | 
|  | arvif->def_wep_key_idx); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to re-set def wpa key idxon vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_clear_peer_keys(struct ath10k_vif *arvif, | 
|  | const u8 *addr) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | struct ath10k_peer *peer; | 
|  | int first_errno = 0; | 
|  | int ret; | 
|  | int i; | 
|  | u32 flags = 0; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | peer = ath10k_peer_find(ar, arvif->vdev_id, addr); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | if (!peer) | 
|  | return -ENOENT; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(peer->keys); i++) { | 
|  | if (peer->keys[i] == NULL) | 
|  | continue; | 
|  |  | 
|  | /* key flags are not required to delete the key */ | 
|  | ret = ath10k_install_key(arvif, peer->keys[i], | 
|  | DISABLE_KEY, addr, flags); | 
|  | if (ret < 0 && first_errno == 0) | 
|  | first_errno = ret; | 
|  |  | 
|  | if (ret < 0) | 
|  | ath10k_warn(ar, "failed to remove peer wep key %d: %d\n", | 
|  | i, ret); | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | peer->keys[i] = NULL; | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  | } | 
|  |  | 
|  | return first_errno; | 
|  | } | 
|  |  | 
|  | bool ath10k_mac_is_peer_wep_key_set(struct ath10k *ar, const u8 *addr, | 
|  | u8 keyidx) | 
|  | { | 
|  | struct ath10k_peer *peer; | 
|  | int i; | 
|  |  | 
|  | lockdep_assert_held(&ar->data_lock); | 
|  |  | 
|  | /* We don't know which vdev this peer belongs to, | 
|  | * since WMI doesn't give us that information. | 
|  | * | 
|  | * FIXME: multi-bss needs to be handled. | 
|  | */ | 
|  | peer = ath10k_peer_find(ar, 0, addr); | 
|  | if (!peer) | 
|  | return false; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(peer->keys); i++) { | 
|  | if (peer->keys[i] && peer->keys[i]->keyidx == keyidx) | 
|  | return true; | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | static int ath10k_clear_vdev_key(struct ath10k_vif *arvif, | 
|  | struct ieee80211_key_conf *key) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | struct ath10k_peer *peer; | 
|  | u8 addr[ETH_ALEN]; | 
|  | int first_errno = 0; | 
|  | int ret; | 
|  | int i; | 
|  | u32 flags = 0; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | for (;;) { | 
|  | /* since ath10k_install_key we can't hold data_lock all the | 
|  | * time, so we try to remove the keys incrementally | 
|  | */ | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | i = 0; | 
|  | list_for_each_entry(peer, &ar->peers, list) { | 
|  | for (i = 0; i < ARRAY_SIZE(peer->keys); i++) { | 
|  | if (peer->keys[i] == key) { | 
|  | ether_addr_copy(addr, peer->addr); | 
|  | peer->keys[i] = NULL; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (i < ARRAY_SIZE(peer->keys)) | 
|  | break; | 
|  | } | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | if (i == ARRAY_SIZE(peer->keys)) | 
|  | break; | 
|  | /* key flags are not required to delete the key */ | 
|  | ret = ath10k_install_key(arvif, key, DISABLE_KEY, addr, flags); | 
|  | if (ret < 0 && first_errno == 0) | 
|  | first_errno = ret; | 
|  |  | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to remove key for %pM: %d\n", | 
|  | addr, ret); | 
|  | } | 
|  |  | 
|  | return first_errno; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_vif_update_wep_key(struct ath10k_vif *arvif, | 
|  | struct ieee80211_key_conf *key) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | struct ath10k_peer *peer; | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | list_for_each_entry(peer, &ar->peers, list) { | 
|  | if (ether_addr_equal(peer->addr, arvif->vif->addr)) | 
|  | continue; | 
|  |  | 
|  | if (ether_addr_equal(peer->addr, arvif->bssid)) | 
|  | continue; | 
|  |  | 
|  | if (peer->keys[key->keyidx] == key) | 
|  | continue; | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vif vdev %i update key %i needs update\n", | 
|  | arvif->vdev_id, key->keyidx); | 
|  |  | 
|  | ret = ath10k_install_peer_wep_keys(arvif, peer->addr); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to update wep keys on vdev %i for peer %pM: %d\n", | 
|  | arvif->vdev_id, peer->addr, ret); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /*********************/ | 
|  | /* General utilities */ | 
|  | /*********************/ | 
|  |  | 
|  | static inline enum wmi_phy_mode | 
|  | chan_to_phymode(const struct cfg80211_chan_def *chandef) | 
|  | { | 
|  | enum wmi_phy_mode phymode = MODE_UNKNOWN; | 
|  |  | 
|  | switch (chandef->chan->band) { | 
|  | case NL80211_BAND_2GHZ: | 
|  | switch (chandef->width) { | 
|  | case NL80211_CHAN_WIDTH_20_NOHT: | 
|  | if (chandef->chan->flags & IEEE80211_CHAN_NO_OFDM) | 
|  | phymode = MODE_11B; | 
|  | else | 
|  | phymode = MODE_11G; | 
|  | break; | 
|  | case NL80211_CHAN_WIDTH_20: | 
|  | phymode = MODE_11NG_HT20; | 
|  | break; | 
|  | case NL80211_CHAN_WIDTH_40: | 
|  | phymode = MODE_11NG_HT40; | 
|  | break; | 
|  | case NL80211_CHAN_WIDTH_5: | 
|  | case NL80211_CHAN_WIDTH_10: | 
|  | case NL80211_CHAN_WIDTH_80: | 
|  | case NL80211_CHAN_WIDTH_80P80: | 
|  | case NL80211_CHAN_WIDTH_160: | 
|  | phymode = MODE_UNKNOWN; | 
|  | break; | 
|  | } | 
|  | break; | 
|  | case NL80211_BAND_5GHZ: | 
|  | switch (chandef->width) { | 
|  | case NL80211_CHAN_WIDTH_20_NOHT: | 
|  | phymode = MODE_11A; | 
|  | break; | 
|  | case NL80211_CHAN_WIDTH_20: | 
|  | phymode = MODE_11NA_HT20; | 
|  | break; | 
|  | case NL80211_CHAN_WIDTH_40: | 
|  | phymode = MODE_11NA_HT40; | 
|  | break; | 
|  | case NL80211_CHAN_WIDTH_80: | 
|  | phymode = MODE_11AC_VHT80; | 
|  | break; | 
|  | case NL80211_CHAN_WIDTH_160: | 
|  | phymode = MODE_11AC_VHT160; | 
|  | break; | 
|  | case NL80211_CHAN_WIDTH_80P80: | 
|  | phymode = MODE_11AC_VHT80_80; | 
|  | break; | 
|  | case NL80211_CHAN_WIDTH_5: | 
|  | case NL80211_CHAN_WIDTH_10: | 
|  | phymode = MODE_UNKNOWN; | 
|  | break; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | WARN_ON(phymode == MODE_UNKNOWN); | 
|  | return phymode; | 
|  | } | 
|  |  | 
|  | static u8 ath10k_parse_mpdudensity(u8 mpdudensity) | 
|  | { | 
|  | /* | 
|  | * 802.11n D2.0 defined values for "Minimum MPDU Start Spacing": | 
|  | *   0 for no restriction | 
|  | *   1 for 1/4 us | 
|  | *   2 for 1/2 us | 
|  | *   3 for 1 us | 
|  | *   4 for 2 us | 
|  | *   5 for 4 us | 
|  | *   6 for 8 us | 
|  | *   7 for 16 us | 
|  | */ | 
|  | switch (mpdudensity) { | 
|  | case 0: | 
|  | return 0; | 
|  | case 1: | 
|  | case 2: | 
|  | case 3: | 
|  | /* Our lower layer calculations limit our precision to | 
|  | * 1 microsecond | 
|  | */ | 
|  | return 1; | 
|  | case 4: | 
|  | return 2; | 
|  | case 5: | 
|  | return 4; | 
|  | case 6: | 
|  | return 8; | 
|  | case 7: | 
|  | return 16; | 
|  | default: | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | int ath10k_mac_vif_chan(struct ieee80211_vif *vif, | 
|  | struct cfg80211_chan_def *def) | 
|  | { | 
|  | struct ieee80211_chanctx_conf *conf; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | conf = rcu_dereference(vif->chanctx_conf); | 
|  | if (!conf) { | 
|  | rcu_read_unlock(); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | *def = conf->def; | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_num_chanctxs_iter(struct ieee80211_hw *hw, | 
|  | struct ieee80211_chanctx_conf *conf, | 
|  | void *data) | 
|  | { | 
|  | int *num = data; | 
|  |  | 
|  | (*num)++; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_num_chanctxs(struct ath10k *ar) | 
|  | { | 
|  | int num = 0; | 
|  |  | 
|  | ieee80211_iter_chan_contexts_atomic(ar->hw, | 
|  | ath10k_mac_num_chanctxs_iter, | 
|  | &num); | 
|  |  | 
|  | return num; | 
|  | } | 
|  |  | 
|  | static void | 
|  | ath10k_mac_get_any_chandef_iter(struct ieee80211_hw *hw, | 
|  | struct ieee80211_chanctx_conf *conf, | 
|  | void *data) | 
|  | { | 
|  | struct cfg80211_chan_def **def = data; | 
|  |  | 
|  | *def = &conf->def; | 
|  | } | 
|  |  | 
|  | static void ath10k_wait_for_peer_delete_done(struct ath10k *ar, u32 vdev_id, | 
|  | const u8 *addr) | 
|  | { | 
|  | unsigned long time_left; | 
|  | int ret; | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_SYNC_DELETE_CMDS, ar->wmi.svc_map)) { | 
|  | ret = ath10k_wait_for_peer_deleted(ar, vdev_id, addr); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed wait for peer deleted"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | time_left = wait_for_completion_timeout(&ar->peer_delete_done, | 
|  | 5 * HZ); | 
|  | if (!time_left) | 
|  | ath10k_warn(ar, "Timeout in receiving peer delete response\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int ath10k_peer_create(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | u32 vdev_id, | 
|  | const u8 *addr, | 
|  | enum wmi_peer_type peer_type) | 
|  | { | 
|  | struct ath10k_vif *arvif; | 
|  | struct ath10k_peer *peer; | 
|  | int num_peers = 0; | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | num_peers = ar->num_peers; | 
|  |  | 
|  | /* Each vdev consumes a peer entry as well */ | 
|  | list_for_each_entry(arvif, &ar->arvifs, list) | 
|  | num_peers++; | 
|  |  | 
|  | if (num_peers >= ar->max_num_peers) | 
|  | return -ENOBUFS; | 
|  |  | 
|  | ret = ath10k_wmi_peer_create(ar, vdev_id, addr, peer_type); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to create wmi peer %pM on vdev %i: %i\n", | 
|  | addr, vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = ath10k_wait_for_peer_created(ar, vdev_id, addr); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to wait for created wmi peer %pM on vdev %i: %i\n", | 
|  | addr, vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  |  | 
|  | peer = ath10k_peer_find(ar, vdev_id, addr); | 
|  | if (!peer) { | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  | ath10k_warn(ar, "failed to find peer %pM on vdev %i after creation\n", | 
|  | addr, vdev_id); | 
|  | ath10k_wait_for_peer_delete_done(ar, vdev_id, addr); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | peer->vif = vif; | 
|  | peer->sta = sta; | 
|  |  | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | ar->num_peers++; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_set_kickout(struct ath10k_vif *arvif) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | u32 param; | 
|  | int ret; | 
|  |  | 
|  | param = ar->wmi.pdev_param->sta_kickout_th; | 
|  | ret = ath10k_wmi_pdev_set_param(ar, param, | 
|  | ATH10K_KICKOUT_THRESHOLD); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set kickout threshold on vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | param = ar->wmi.vdev_param->ap_keepalive_min_idle_inactive_time_secs; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param, | 
|  | ATH10K_KEEPALIVE_MIN_IDLE); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set keepalive minimum idle time on vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | param = ar->wmi.vdev_param->ap_keepalive_max_idle_inactive_time_secs; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param, | 
|  | ATH10K_KEEPALIVE_MAX_IDLE); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set keepalive maximum idle time on vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | param = ar->wmi.vdev_param->ap_keepalive_max_unresponsive_time_secs; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param, | 
|  | ATH10K_KEEPALIVE_MAX_UNRESPONSIVE); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set keepalive maximum unresponsive time on vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_set_rts(struct ath10k_vif *arvif, u32 value) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | u32 vdev_param; | 
|  |  | 
|  | vdev_param = ar->wmi.vdev_param->rts_threshold; | 
|  | return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, value); | 
|  | } | 
|  |  | 
|  | static int ath10k_peer_delete(struct ath10k *ar, u32 vdev_id, const u8 *addr) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | ret = ath10k_wmi_peer_delete(ar, vdev_id, addr); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = ath10k_wait_for_peer_deleted(ar, vdev_id, addr); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_SYNC_DELETE_CMDS, ar->wmi.svc_map)) { | 
|  | unsigned long time_left; | 
|  |  | 
|  | time_left = wait_for_completion_timeout | 
|  | (&ar->peer_delete_done, 5 * HZ); | 
|  |  | 
|  | if (!time_left) { | 
|  | ath10k_warn(ar, "Timeout in receiving peer delete response\n"); | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  | } | 
|  |  | 
|  | ar->num_peers--; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ath10k_peer_cleanup(struct ath10k *ar, u32 vdev_id) | 
|  | { | 
|  | struct ath10k_peer *peer, *tmp; | 
|  | int peer_id; | 
|  | int i; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | list_for_each_entry_safe(peer, tmp, &ar->peers, list) { | 
|  | if (peer->vdev_id != vdev_id) | 
|  | continue; | 
|  |  | 
|  | ath10k_warn(ar, "removing stale peer %pM from vdev_id %d\n", | 
|  | peer->addr, vdev_id); | 
|  |  | 
|  | for_each_set_bit(peer_id, peer->peer_ids, | 
|  | ATH10K_MAX_NUM_PEER_IDS) { | 
|  | ar->peer_map[peer_id] = NULL; | 
|  | } | 
|  |  | 
|  | /* Double check that peer is properly un-referenced from | 
|  | * the peer_map | 
|  | */ | 
|  | for (i = 0; i < ARRAY_SIZE(ar->peer_map); i++) { | 
|  | if (ar->peer_map[i] == peer) { | 
|  | ath10k_warn(ar, "removing stale peer_map entry for %pM (ptr %pK idx %d)\n", | 
|  | peer->addr, peer, i); | 
|  | ar->peer_map[i] = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | list_del(&peer->list); | 
|  | kfree(peer); | 
|  | ar->num_peers--; | 
|  | } | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  | } | 
|  |  | 
|  | static void ath10k_peer_cleanup_all(struct ath10k *ar) | 
|  | { | 
|  | struct ath10k_peer *peer, *tmp; | 
|  | int i; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | list_for_each_entry_safe(peer, tmp, &ar->peers, list) { | 
|  | list_del(&peer->list); | 
|  | kfree(peer); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(ar->peer_map); i++) | 
|  | ar->peer_map[i] = NULL; | 
|  |  | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | ar->num_peers = 0; | 
|  | ar->num_stations = 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_tdls_peer_update(struct ath10k *ar, u32 vdev_id, | 
|  | struct ieee80211_sta *sta, | 
|  | enum wmi_tdls_peer_state state) | 
|  | { | 
|  | int ret; | 
|  | struct wmi_tdls_peer_update_cmd_arg arg = {}; | 
|  | struct wmi_tdls_peer_capab_arg cap = {}; | 
|  | struct wmi_channel_arg chan_arg = {}; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | arg.vdev_id = vdev_id; | 
|  | arg.peer_state = state; | 
|  | ether_addr_copy(arg.addr, sta->addr); | 
|  |  | 
|  | cap.peer_max_sp = sta->max_sp; | 
|  | cap.peer_uapsd_queues = sta->uapsd_queues; | 
|  |  | 
|  | if (state == WMI_TDLS_PEER_STATE_CONNECTED && | 
|  | !sta->tdls_initiator) | 
|  | cap.is_peer_responder = 1; | 
|  |  | 
|  | ret = ath10k_wmi_tdls_peer_update(ar, &arg, &cap, &chan_arg); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to update tdls peer %pM on vdev %i: %i\n", | 
|  | arg.addr, vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /************************/ | 
|  | /* Interface management */ | 
|  | /************************/ | 
|  |  | 
|  | void ath10k_mac_vif_beacon_free(struct ath10k_vif *arvif) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  |  | 
|  | lockdep_assert_held(&ar->data_lock); | 
|  |  | 
|  | if (!arvif->beacon) | 
|  | return; | 
|  |  | 
|  | if (!arvif->beacon_buf) | 
|  | dma_unmap_single(ar->dev, ATH10K_SKB_CB(arvif->beacon)->paddr, | 
|  | arvif->beacon->len, DMA_TO_DEVICE); | 
|  |  | 
|  | if (WARN_ON(arvif->beacon_state != ATH10K_BEACON_SCHEDULED && | 
|  | arvif->beacon_state != ATH10K_BEACON_SENT)) | 
|  | return; | 
|  |  | 
|  | dev_kfree_skb_any(arvif->beacon); | 
|  |  | 
|  | arvif->beacon = NULL; | 
|  | arvif->beacon_state = ATH10K_BEACON_SCHEDULED; | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_vif_beacon_cleanup(struct ath10k_vif *arvif) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  |  | 
|  | lockdep_assert_held(&ar->data_lock); | 
|  |  | 
|  | ath10k_mac_vif_beacon_free(arvif); | 
|  |  | 
|  | if (arvif->beacon_buf) { | 
|  | dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN, | 
|  | arvif->beacon_buf, arvif->beacon_paddr); | 
|  | arvif->beacon_buf = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static inline int ath10k_vdev_setup_sync(struct ath10k *ar) | 
|  | { | 
|  | unsigned long time_left; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags)) | 
|  | return -ESHUTDOWN; | 
|  |  | 
|  | time_left = wait_for_completion_timeout(&ar->vdev_setup_done, | 
|  | ATH10K_VDEV_SETUP_TIMEOUT_HZ); | 
|  | if (time_left == 0) | 
|  | return -ETIMEDOUT; | 
|  |  | 
|  | return ar->last_wmi_vdev_start_status; | 
|  | } | 
|  |  | 
|  | static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id) | 
|  | { | 
|  | struct cfg80211_chan_def *chandef = NULL; | 
|  | struct ieee80211_channel *channel = NULL; | 
|  | struct wmi_vdev_start_request_arg arg = {}; | 
|  | int ret = 0; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | ieee80211_iter_chan_contexts_atomic(ar->hw, | 
|  | ath10k_mac_get_any_chandef_iter, | 
|  | &chandef); | 
|  | if (WARN_ON_ONCE(!chandef)) | 
|  | return -ENOENT; | 
|  |  | 
|  | channel = chandef->chan; | 
|  |  | 
|  | arg.vdev_id = vdev_id; | 
|  | arg.channel.freq = channel->center_freq; | 
|  | arg.channel.band_center_freq1 = chandef->center_freq1; | 
|  | arg.channel.band_center_freq2 = chandef->center_freq2; | 
|  |  | 
|  | /* TODO setup this dynamically, what in case we | 
|  | * don't have any vifs? | 
|  | */ | 
|  | arg.channel.mode = chan_to_phymode(chandef); | 
|  | arg.channel.chan_radar = | 
|  | !!(channel->flags & IEEE80211_CHAN_RADAR); | 
|  |  | 
|  | arg.channel.min_power = 0; | 
|  | arg.channel.max_power = channel->max_power * 2; | 
|  | arg.channel.max_reg_power = channel->max_reg_power * 2; | 
|  | arg.channel.max_antenna_gain = channel->max_antenna_gain * 2; | 
|  |  | 
|  | reinit_completion(&ar->vdev_setup_done); | 
|  | reinit_completion(&ar->vdev_delete_done); | 
|  |  | 
|  | ret = ath10k_wmi_vdev_start(ar, &arg); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to request monitor vdev %i start: %d\n", | 
|  | vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = ath10k_vdev_setup_sync(ar); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to synchronize setup for monitor vdev %i start: %d\n", | 
|  | vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = ath10k_wmi_vdev_up(ar, vdev_id, 0, ar->mac_addr); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to put up monitor vdev %i: %d\n", | 
|  | vdev_id, ret); | 
|  | goto vdev_stop; | 
|  | } | 
|  |  | 
|  | ar->monitor_vdev_id = vdev_id; | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %i started\n", | 
|  | ar->monitor_vdev_id); | 
|  | return 0; | 
|  |  | 
|  | vdev_stop: | 
|  | ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to stop monitor vdev %i after start failure: %d\n", | 
|  | ar->monitor_vdev_id, ret); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ath10k_monitor_vdev_stop(struct ath10k *ar) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | ret = ath10k_wmi_vdev_down(ar, ar->monitor_vdev_id); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to put down monitor vdev %i: %d\n", | 
|  | ar->monitor_vdev_id, ret); | 
|  |  | 
|  | reinit_completion(&ar->vdev_setup_done); | 
|  | reinit_completion(&ar->vdev_delete_done); | 
|  |  | 
|  | ret = ath10k_wmi_vdev_stop(ar, ar->monitor_vdev_id); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to to request monitor vdev %i stop: %d\n", | 
|  | ar->monitor_vdev_id, ret); | 
|  |  | 
|  | ret = ath10k_vdev_setup_sync(ar); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to synchronize monitor vdev %i stop: %d\n", | 
|  | ar->monitor_vdev_id, ret); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %i stopped\n", | 
|  | ar->monitor_vdev_id); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ath10k_monitor_vdev_create(struct ath10k *ar) | 
|  | { | 
|  | int bit, ret = 0; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | if (ar->free_vdev_map == 0) { | 
|  | ath10k_warn(ar, "failed to find free vdev id for monitor vdev\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | bit = __ffs64(ar->free_vdev_map); | 
|  |  | 
|  | ar->monitor_vdev_id = bit; | 
|  |  | 
|  | ret = ath10k_wmi_vdev_create(ar, ar->monitor_vdev_id, | 
|  | WMI_VDEV_TYPE_MONITOR, | 
|  | 0, ar->mac_addr); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to request monitor vdev %i creation: %d\n", | 
|  | ar->monitor_vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ar->free_vdev_map &= ~(1LL << ar->monitor_vdev_id); | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %d created\n", | 
|  | ar->monitor_vdev_id); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_monitor_vdev_delete(struct ath10k *ar) | 
|  | { | 
|  | int ret = 0; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | ret = ath10k_wmi_vdev_delete(ar, ar->monitor_vdev_id); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to request wmi monitor vdev %i removal: %d\n", | 
|  | ar->monitor_vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ar->free_vdev_map |= 1LL << ar->monitor_vdev_id; | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor vdev %d deleted\n", | 
|  | ar->monitor_vdev_id); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ath10k_monitor_start(struct ath10k *ar) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | ret = ath10k_monitor_vdev_create(ar); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to create monitor vdev: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = ath10k_monitor_vdev_start(ar, ar->monitor_vdev_id); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to start monitor vdev: %d\n", ret); | 
|  | ath10k_monitor_vdev_delete(ar); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ar->monitor_started = true; | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor started\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_monitor_stop(struct ath10k *ar) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | ret = ath10k_monitor_vdev_stop(ar); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to stop monitor vdev: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = ath10k_monitor_vdev_delete(ar); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to delete monitor vdev: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ar->monitor_started = false; | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor stopped\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static bool ath10k_mac_monitor_vdev_is_needed(struct ath10k *ar) | 
|  | { | 
|  | int num_ctx; | 
|  |  | 
|  | /* At least one chanctx is required to derive a channel to start | 
|  | * monitor vdev on. | 
|  | */ | 
|  | num_ctx = ath10k_mac_num_chanctxs(ar); | 
|  | if (num_ctx == 0) | 
|  | return false; | 
|  |  | 
|  | /* If there's already an existing special monitor interface then don't | 
|  | * bother creating another monitor vdev. | 
|  | */ | 
|  | if (ar->monitor_arvif) | 
|  | return false; | 
|  |  | 
|  | return ar->monitor || | 
|  | (!test_bit(ATH10K_FW_FEATURE_ALLOWS_MESH_BCAST, | 
|  | ar->running_fw->fw_file.fw_features) && | 
|  | (ar->filter_flags & FIF_OTHER_BSS)) || | 
|  | test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags); | 
|  | } | 
|  |  | 
|  | static bool ath10k_mac_monitor_vdev_is_allowed(struct ath10k *ar) | 
|  | { | 
|  | int num_ctx; | 
|  |  | 
|  | num_ctx = ath10k_mac_num_chanctxs(ar); | 
|  |  | 
|  | /* FIXME: Current interface combinations and cfg80211/mac80211 code | 
|  | * shouldn't allow this but make sure to prevent handling the following | 
|  | * case anyway since multi-channel DFS hasn't been tested at all. | 
|  | */ | 
|  | if (test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags) && num_ctx > 1) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static int ath10k_monitor_recalc(struct ath10k *ar) | 
|  | { | 
|  | bool needed; | 
|  | bool allowed; | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | needed = ath10k_mac_monitor_vdev_is_needed(ar); | 
|  | allowed = ath10k_mac_monitor_vdev_is_allowed(ar); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac monitor recalc started? %d needed? %d allowed? %d\n", | 
|  | ar->monitor_started, needed, allowed); | 
|  |  | 
|  | if (WARN_ON(needed && !allowed)) { | 
|  | if (ar->monitor_started) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac monitor stopping disallowed monitor\n"); | 
|  |  | 
|  | ret = ath10k_monitor_stop(ar); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to stop disallowed monitor: %d\n", | 
|  | ret); | 
|  | /* not serious */ | 
|  | } | 
|  |  | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | if (needed == ar->monitor_started) | 
|  | return 0; | 
|  |  | 
|  | if (needed) | 
|  | return ath10k_monitor_start(ar); | 
|  | else | 
|  | return ath10k_monitor_stop(ar); | 
|  | } | 
|  |  | 
|  | static bool ath10k_mac_can_set_cts_prot(struct ath10k_vif *arvif) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | if (!arvif->is_started) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "defer cts setup, vdev is not ready yet\n"); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_set_cts_prot(struct ath10k_vif *arvif) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | u32 vdev_param; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | vdev_param = ar->wmi.vdev_param->protection_mode; | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d cts_protection %d\n", | 
|  | arvif->vdev_id, arvif->use_cts_prot); | 
|  |  | 
|  | return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | 
|  | arvif->use_cts_prot ? 1 : 0); | 
|  | } | 
|  |  | 
|  | static int ath10k_recalc_rtscts_prot(struct ath10k_vif *arvif) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | u32 vdev_param, rts_cts = 0; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | vdev_param = ar->wmi.vdev_param->enable_rtscts; | 
|  |  | 
|  | rts_cts |= SM(WMI_RTSCTS_ENABLED, WMI_RTSCTS_SET); | 
|  |  | 
|  | if (arvif->num_legacy_stations > 0) | 
|  | rts_cts |= SM(WMI_RTSCTS_ACROSS_SW_RETRIES, | 
|  | WMI_RTSCTS_PROFILE); | 
|  | else | 
|  | rts_cts |= SM(WMI_RTSCTS_FOR_SECOND_RATESERIES, | 
|  | WMI_RTSCTS_PROFILE); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d recalc rts/cts prot %d\n", | 
|  | arvif->vdev_id, rts_cts); | 
|  |  | 
|  | return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | 
|  | rts_cts); | 
|  | } | 
|  |  | 
|  | static int ath10k_start_cac(struct ath10k *ar) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | set_bit(ATH10K_CAC_RUNNING, &ar->dev_flags); | 
|  |  | 
|  | ret = ath10k_monitor_recalc(ar); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to start monitor (cac): %d\n", ret); | 
|  | clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac cac start monitor vdev %d\n", | 
|  | ar->monitor_vdev_id); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_stop_cac(struct ath10k *ar) | 
|  | { | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | /* CAC is not running - do nothing */ | 
|  | if (!test_bit(ATH10K_CAC_RUNNING, &ar->dev_flags)) | 
|  | return 0; | 
|  |  | 
|  | clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags); | 
|  | ath10k_monitor_stop(ar); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac cac finished\n"); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_has_radar_iter(struct ieee80211_hw *hw, | 
|  | struct ieee80211_chanctx_conf *conf, | 
|  | void *data) | 
|  | { | 
|  | bool *ret = data; | 
|  |  | 
|  | if (!*ret && conf->radar_enabled) | 
|  | *ret = true; | 
|  | } | 
|  |  | 
|  | static bool ath10k_mac_has_radar_enabled(struct ath10k *ar) | 
|  | { | 
|  | bool has_radar = false; | 
|  |  | 
|  | ieee80211_iter_chan_contexts_atomic(ar->hw, | 
|  | ath10k_mac_has_radar_iter, | 
|  | &has_radar); | 
|  |  | 
|  | return has_radar; | 
|  | } | 
|  |  | 
|  | static void ath10k_recalc_radar_detection(struct ath10k *ar) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | ath10k_stop_cac(ar); | 
|  |  | 
|  | if (!ath10k_mac_has_radar_enabled(ar)) | 
|  | return; | 
|  |  | 
|  | if (ar->num_started_vdevs > 0) | 
|  | return; | 
|  |  | 
|  | ret = ath10k_start_cac(ar); | 
|  | if (ret) { | 
|  | /* | 
|  | * Not possible to start CAC on current channel so starting | 
|  | * radiation is not allowed, make this channel DFS_UNAVAILABLE | 
|  | * by indicating that radar was detected. | 
|  | */ | 
|  | ath10k_warn(ar, "failed to start CAC: %d\n", ret); | 
|  | ieee80211_radar_detected(ar->hw); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int ath10k_vdev_stop(struct ath10k_vif *arvif) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | reinit_completion(&ar->vdev_setup_done); | 
|  | reinit_completion(&ar->vdev_delete_done); | 
|  |  | 
|  | ret = ath10k_wmi_vdev_stop(ar, arvif->vdev_id); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to stop WMI vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = ath10k_vdev_setup_sync(ar); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to synchronize setup for vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | WARN_ON(ar->num_started_vdevs == 0); | 
|  |  | 
|  | if (ar->num_started_vdevs != 0) { | 
|  | ar->num_started_vdevs--; | 
|  | ath10k_recalc_radar_detection(ar); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ath10k_vdev_start_restart(struct ath10k_vif *arvif, | 
|  | const struct cfg80211_chan_def *chandef, | 
|  | bool restart) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | struct wmi_vdev_start_request_arg arg = {}; | 
|  | int ret = 0; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | reinit_completion(&ar->vdev_setup_done); | 
|  | reinit_completion(&ar->vdev_delete_done); | 
|  |  | 
|  | arg.vdev_id = arvif->vdev_id; | 
|  | arg.dtim_period = arvif->dtim_period; | 
|  | arg.bcn_intval = arvif->beacon_interval; | 
|  |  | 
|  | arg.channel.freq = chandef->chan->center_freq; | 
|  | arg.channel.band_center_freq1 = chandef->center_freq1; | 
|  | arg.channel.band_center_freq2 = chandef->center_freq2; | 
|  | arg.channel.mode = chan_to_phymode(chandef); | 
|  |  | 
|  | arg.channel.min_power = 0; | 
|  | arg.channel.max_power = chandef->chan->max_power * 2; | 
|  | arg.channel.max_reg_power = chandef->chan->max_reg_power * 2; | 
|  | arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2; | 
|  |  | 
|  | if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { | 
|  | arg.ssid = arvif->u.ap.ssid; | 
|  | arg.ssid_len = arvif->u.ap.ssid_len; | 
|  | arg.hidden_ssid = arvif->u.ap.hidden_ssid; | 
|  |  | 
|  | /* For now allow DFS for AP mode */ | 
|  | arg.channel.chan_radar = | 
|  | !!(chandef->chan->flags & IEEE80211_CHAN_RADAR); | 
|  | } else if (arvif->vdev_type == WMI_VDEV_TYPE_IBSS) { | 
|  | arg.ssid = arvif->vif->bss_conf.ssid; | 
|  | arg.ssid_len = arvif->vif->bss_conf.ssid_len; | 
|  | } | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac vdev %d start center_freq %d phymode %s\n", | 
|  | arg.vdev_id, arg.channel.freq, | 
|  | ath10k_wmi_phymode_str(arg.channel.mode)); | 
|  |  | 
|  | if (restart) | 
|  | ret = ath10k_wmi_vdev_restart(ar, &arg); | 
|  | else | 
|  | ret = ath10k_wmi_vdev_start(ar, &arg); | 
|  |  | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to start WMI vdev %i: %d\n", | 
|  | arg.vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = ath10k_vdev_setup_sync(ar); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, | 
|  | "failed to synchronize setup for vdev %i restart %d: %d\n", | 
|  | arg.vdev_id, restart, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ar->num_started_vdevs++; | 
|  | ath10k_recalc_radar_detection(ar); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ath10k_vdev_start(struct ath10k_vif *arvif, | 
|  | const struct cfg80211_chan_def *def) | 
|  | { | 
|  | return ath10k_vdev_start_restart(arvif, def, false); | 
|  | } | 
|  |  | 
|  | static int ath10k_vdev_restart(struct ath10k_vif *arvif, | 
|  | const struct cfg80211_chan_def *def) | 
|  | { | 
|  | return ath10k_vdev_start_restart(arvif, def, true); | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_setup_bcn_p2p_ie(struct ath10k_vif *arvif, | 
|  | struct sk_buff *bcn) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | struct ieee80211_mgmt *mgmt; | 
|  | const u8 *p2p_ie; | 
|  | int ret; | 
|  |  | 
|  | if (arvif->vif->type != NL80211_IFTYPE_AP || !arvif->vif->p2p) | 
|  | return 0; | 
|  |  | 
|  | mgmt = (void *)bcn->data; | 
|  | p2p_ie = cfg80211_find_vendor_ie(WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P, | 
|  | mgmt->u.beacon.variable, | 
|  | bcn->len - (mgmt->u.beacon.variable - | 
|  | bcn->data)); | 
|  | if (!p2p_ie) | 
|  | return -ENOENT; | 
|  |  | 
|  | ret = ath10k_wmi_p2p_go_bcn_ie(ar, arvif->vdev_id, p2p_ie); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to submit p2p go bcn ie for vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_remove_vendor_ie(struct sk_buff *skb, unsigned int oui, | 
|  | u8 oui_type, size_t ie_offset) | 
|  | { | 
|  | size_t len; | 
|  | const u8 *next; | 
|  | const u8 *end; | 
|  | u8 *ie; | 
|  |  | 
|  | if (WARN_ON(skb->len < ie_offset)) | 
|  | return -EINVAL; | 
|  |  | 
|  | ie = (u8 *)cfg80211_find_vendor_ie(oui, oui_type, | 
|  | skb->data + ie_offset, | 
|  | skb->len - ie_offset); | 
|  | if (!ie) | 
|  | return -ENOENT; | 
|  |  | 
|  | len = ie[1] + 2; | 
|  | end = skb->data + skb->len; | 
|  | next = ie + len; | 
|  |  | 
|  | if (WARN_ON(next > end)) | 
|  | return -EINVAL; | 
|  |  | 
|  | memmove(ie, next, end - next); | 
|  | skb_trim(skb, skb->len - len); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_setup_bcn_tmpl(struct ath10k_vif *arvif) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | struct ieee80211_hw *hw = ar->hw; | 
|  | struct ieee80211_vif *vif = arvif->vif; | 
|  | struct ieee80211_mutable_offsets offs = {}; | 
|  | struct sk_buff *bcn; | 
|  | int ret; | 
|  |  | 
|  | if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map)) | 
|  | return 0; | 
|  |  | 
|  | if (arvif->vdev_type != WMI_VDEV_TYPE_AP && | 
|  | arvif->vdev_type != WMI_VDEV_TYPE_IBSS) | 
|  | return 0; | 
|  |  | 
|  | bcn = ieee80211_beacon_get_template(hw, vif, &offs); | 
|  | if (!bcn) { | 
|  | ath10k_warn(ar, "failed to get beacon template from mac80211\n"); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | ret = ath10k_mac_setup_bcn_p2p_ie(arvif, bcn); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to setup p2p go bcn ie: %d\n", ret); | 
|  | kfree_skb(bcn); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* P2P IE is inserted by firmware automatically (as configured above) | 
|  | * so remove it from the base beacon template to avoid duplicate P2P | 
|  | * IEs in beacon frames. | 
|  | */ | 
|  | ath10k_mac_remove_vendor_ie(bcn, WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P, | 
|  | offsetof(struct ieee80211_mgmt, | 
|  | u.beacon.variable)); | 
|  |  | 
|  | ret = ath10k_wmi_bcn_tmpl(ar, arvif->vdev_id, offs.tim_offset, bcn, 0, | 
|  | 0, NULL, 0); | 
|  | kfree_skb(bcn); | 
|  |  | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to submit beacon template command: %d\n", | 
|  | ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | struct ieee80211_hw *hw = ar->hw; | 
|  | struct ieee80211_vif *vif = arvif->vif; | 
|  | struct sk_buff *prb; | 
|  | int ret; | 
|  |  | 
|  | if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map)) | 
|  | return 0; | 
|  |  | 
|  | if (arvif->vdev_type != WMI_VDEV_TYPE_AP) | 
|  | return 0; | 
|  |  | 
|  | /* For mesh, probe response and beacon share the same template */ | 
|  | if (ieee80211_vif_is_mesh(vif)) | 
|  | return 0; | 
|  |  | 
|  | prb = ieee80211_proberesp_get(hw, vif); | 
|  | if (!prb) { | 
|  | ath10k_warn(ar, "failed to get probe resp template from mac80211\n"); | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | ret = ath10k_wmi_prb_tmpl(ar, arvif->vdev_id, prb); | 
|  | kfree_skb(prb); | 
|  |  | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to submit probe resp template command: %d\n", | 
|  | ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_vif_fix_hidden_ssid(struct ath10k_vif *arvif) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | struct cfg80211_chan_def def; | 
|  | int ret; | 
|  |  | 
|  | /* When originally vdev is started during assign_vif_chanctx() some | 
|  | * information is missing, notably SSID. Firmware revisions with beacon | 
|  | * offloading require the SSID to be provided during vdev (re)start to | 
|  | * handle hidden SSID properly. | 
|  | * | 
|  | * Vdev restart must be done after vdev has been both started and | 
|  | * upped. Otherwise some firmware revisions (at least 10.2) fail to | 
|  | * deliver vdev restart response event causing timeouts during vdev | 
|  | * syncing in ath10k. | 
|  | * | 
|  | * Note: The vdev down/up and template reinstallation could be skipped | 
|  | * since only wmi-tlv firmware are known to have beacon offload and | 
|  | * wmi-tlv doesn't seem to misbehave like 10.2 wrt vdev restart | 
|  | * response delivery. It's probably more robust to keep it as is. | 
|  | */ | 
|  | if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map)) | 
|  | return 0; | 
|  |  | 
|  | if (WARN_ON(!arvif->is_started)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (WARN_ON(!arvif->is_up)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (WARN_ON(ath10k_mac_vif_chan(arvif->vif, &def))) | 
|  | return -EINVAL; | 
|  |  | 
|  | ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to bring down ap vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Vdev down reset beacon & presp templates. Reinstall them. Otherwise | 
|  | * firmware will crash upon vdev up. | 
|  | */ | 
|  |  | 
|  | ret = ath10k_mac_setup_bcn_tmpl(arvif); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to update beacon template: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = ath10k_mac_setup_prb_tmpl(arvif); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to update presp template: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = ath10k_vdev_restart(arvif, &def); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to restart ap vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid, | 
|  | arvif->bssid); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to bring up ap vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ath10k_control_beaconing(struct ath10k_vif *arvif, | 
|  | struct ieee80211_bss_conf *info) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | int ret = 0; | 
|  |  | 
|  | lockdep_assert_held(&arvif->ar->conf_mutex); | 
|  |  | 
|  | if (!info->enable_beacon) { | 
|  | ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to down vdev_id %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  |  | 
|  | arvif->is_up = false; | 
|  |  | 
|  | spin_lock_bh(&arvif->ar->data_lock); | 
|  | ath10k_mac_vif_beacon_free(arvif); | 
|  | spin_unlock_bh(&arvif->ar->data_lock); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | arvif->tx_seq_no = 0x1000; | 
|  |  | 
|  | arvif->aid = 0; | 
|  | ether_addr_copy(arvif->bssid, info->bssid); | 
|  |  | 
|  | ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid, | 
|  | arvif->bssid); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to bring up vdev %d: %i\n", | 
|  | arvif->vdev_id, ret); | 
|  | return; | 
|  | } | 
|  |  | 
|  | arvif->is_up = true; | 
|  |  | 
|  | ret = ath10k_mac_vif_fix_hidden_ssid(arvif); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to fix hidden ssid for vdev %i, expect trouble: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d up\n", arvif->vdev_id); | 
|  | } | 
|  |  | 
|  | static void ath10k_control_ibss(struct ath10k_vif *arvif, | 
|  | struct ieee80211_bss_conf *info, | 
|  | const u8 self_peer[ETH_ALEN]) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | u32 vdev_param; | 
|  | int ret = 0; | 
|  |  | 
|  | lockdep_assert_held(&arvif->ar->conf_mutex); | 
|  |  | 
|  | if (!info->ibss_joined) { | 
|  | if (is_zero_ether_addr(arvif->bssid)) | 
|  | return; | 
|  |  | 
|  | eth_zero_addr(arvif->bssid); | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | vdev_param = arvif->ar->wmi.vdev_param->atim_window; | 
|  | ret = ath10k_wmi_vdev_set_param(arvif->ar, arvif->vdev_id, vdev_param, | 
|  | ATH10K_DEFAULT_ATIM); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to set IBSS ATIM for vdev %d: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_vif_recalc_ps_wake_threshold(struct ath10k_vif *arvif) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | u32 param; | 
|  | u32 value; | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&arvif->ar->conf_mutex); | 
|  |  | 
|  | if (arvif->u.sta.uapsd) | 
|  | value = WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER; | 
|  | else | 
|  | value = WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS; | 
|  |  | 
|  | param = WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD; | 
|  | ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param, value); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to submit ps wake threshold %u on vdev %i: %d\n", | 
|  | value, arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_vif_recalc_ps_poll_count(struct ath10k_vif *arvif) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | u32 param; | 
|  | u32 value; | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&arvif->ar->conf_mutex); | 
|  |  | 
|  | if (arvif->u.sta.uapsd) | 
|  | value = WMI_STA_PS_PSPOLL_COUNT_UAPSD; | 
|  | else | 
|  | value = WMI_STA_PS_PSPOLL_COUNT_NO_MAX; | 
|  |  | 
|  | param = WMI_STA_PS_PARAM_PSPOLL_COUNT; | 
|  | ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, | 
|  | param, value); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to submit ps poll count %u on vdev %i: %d\n", | 
|  | value, arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_num_vifs_started(struct ath10k *ar) | 
|  | { | 
|  | struct ath10k_vif *arvif; | 
|  | int num = 0; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | list_for_each_entry(arvif, &ar->arvifs, list) | 
|  | if (arvif->is_started) | 
|  | num++; | 
|  |  | 
|  | return num; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_vif_setup_ps(struct ath10k_vif *arvif) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | struct ieee80211_vif *vif = arvif->vif; | 
|  | struct ieee80211_conf *conf = &ar->hw->conf; | 
|  | enum wmi_sta_powersave_param param; | 
|  | enum wmi_sta_ps_mode psmode; | 
|  | int ret; | 
|  | int ps_timeout; | 
|  | bool enable_ps; | 
|  |  | 
|  | lockdep_assert_held(&arvif->ar->conf_mutex); | 
|  |  | 
|  | if (arvif->vif->type != NL80211_IFTYPE_STATION) | 
|  | return 0; | 
|  |  | 
|  | enable_ps = arvif->ps; | 
|  |  | 
|  | if (enable_ps && ath10k_mac_num_vifs_started(ar) > 1 && | 
|  | !test_bit(ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT, | 
|  | ar->running_fw->fw_file.fw_features)) { | 
|  | ath10k_warn(ar, "refusing to enable ps on vdev %i: not supported by fw\n", | 
|  | arvif->vdev_id); | 
|  | enable_ps = false; | 
|  | } | 
|  |  | 
|  | if (!arvif->is_started) { | 
|  | /* mac80211 can update vif powersave state while disconnected. | 
|  | * Firmware doesn't behave nicely and consumes more power than | 
|  | * necessary if PS is disabled on a non-started vdev. Hence | 
|  | * force-enable PS for non-running vdevs. | 
|  | */ | 
|  | psmode = WMI_STA_PS_MODE_ENABLED; | 
|  | } else if (enable_ps) { | 
|  | psmode = WMI_STA_PS_MODE_ENABLED; | 
|  | param = WMI_STA_PS_PARAM_INACTIVITY_TIME; | 
|  |  | 
|  | ps_timeout = conf->dynamic_ps_timeout; | 
|  | if (ps_timeout == 0) { | 
|  | /* Firmware doesn't like 0 */ | 
|  | ps_timeout = ieee80211_tu_to_usec( | 
|  | vif->bss_conf.beacon_int) / 1000; | 
|  | } | 
|  |  | 
|  | ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, param, | 
|  | ps_timeout); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set inactivity time for vdev %d: %i\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  | } else { | 
|  | psmode = WMI_STA_PS_MODE_DISABLED; | 
|  | } | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d psmode %s\n", | 
|  | arvif->vdev_id, psmode ? "enable" : "disable"); | 
|  |  | 
|  | ret = ath10k_wmi_set_psmode(ar, arvif->vdev_id, psmode); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set PS Mode %d for vdev %d: %d\n", | 
|  | psmode, arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_vif_disable_keepalive(struct ath10k_vif *arvif) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | struct wmi_sta_keepalive_arg arg = {}; | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&arvif->ar->conf_mutex); | 
|  |  | 
|  | if (arvif->vdev_type != WMI_VDEV_TYPE_STA) | 
|  | return 0; | 
|  |  | 
|  | if (!test_bit(WMI_SERVICE_STA_KEEP_ALIVE, ar->wmi.svc_map)) | 
|  | return 0; | 
|  |  | 
|  | /* Some firmware revisions have a bug and ignore the `enabled` field. | 
|  | * Instead use the interval to disable the keepalive. | 
|  | */ | 
|  | arg.vdev_id = arvif->vdev_id; | 
|  | arg.enabled = 1; | 
|  | arg.method = WMI_STA_KEEPALIVE_METHOD_NULL_FRAME; | 
|  | arg.interval = WMI_STA_KEEPALIVE_INTERVAL_DISABLE; | 
|  |  | 
|  | ret = ath10k_wmi_sta_keepalive(ar, &arg); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to submit keepalive on vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_vif_ap_csa_count_down(struct ath10k_vif *arvif) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | struct ieee80211_vif *vif = arvif->vif; | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&arvif->ar->conf_mutex); | 
|  |  | 
|  | if (WARN_ON(!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))) | 
|  | return; | 
|  |  | 
|  | if (arvif->vdev_type != WMI_VDEV_TYPE_AP) | 
|  | return; | 
|  |  | 
|  | if (!vif->csa_active) | 
|  | return; | 
|  |  | 
|  | if (!arvif->is_up) | 
|  | return; | 
|  |  | 
|  | if (!ieee80211_csa_is_complete(vif)) { | 
|  | ieee80211_csa_update_counter(vif); | 
|  |  | 
|  | ret = ath10k_mac_setup_bcn_tmpl(arvif); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to update bcn tmpl during csa: %d\n", | 
|  | ret); | 
|  |  | 
|  | ret = ath10k_mac_setup_prb_tmpl(arvif); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to update prb tmpl during csa: %d\n", | 
|  | ret); | 
|  | } else { | 
|  | ieee80211_csa_finish(vif); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_vif_ap_csa_work(struct work_struct *work) | 
|  | { | 
|  | struct ath10k_vif *arvif = container_of(work, struct ath10k_vif, | 
|  | ap_csa_work); | 
|  | struct ath10k *ar = arvif->ar; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  | ath10k_mac_vif_ap_csa_count_down(arvif); | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_handle_beacon_iter(void *data, u8 *mac, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct sk_buff *skb = data; | 
|  | struct ieee80211_mgmt *mgmt = (void *)skb->data; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  |  | 
|  | if (vif->type != NL80211_IFTYPE_STATION) | 
|  | return; | 
|  |  | 
|  | if (!ether_addr_equal(mgmt->bssid, vif->bss_conf.bssid)) | 
|  | return; | 
|  |  | 
|  | cancel_delayed_work(&arvif->connection_loss_work); | 
|  | } | 
|  |  | 
|  | void ath10k_mac_handle_beacon(struct ath10k *ar, struct sk_buff *skb) | 
|  | { | 
|  | ieee80211_iterate_active_interfaces_atomic(ar->hw, | 
|  | IEEE80211_IFACE_ITER_NORMAL, | 
|  | ath10k_mac_handle_beacon_iter, | 
|  | skb); | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_handle_beacon_miss_iter(void *data, u8 *mac, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | u32 *vdev_id = data; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct ath10k *ar = arvif->ar; | 
|  | struct ieee80211_hw *hw = ar->hw; | 
|  |  | 
|  | if (arvif->vdev_id != *vdev_id) | 
|  | return; | 
|  |  | 
|  | if (!arvif->is_up) | 
|  | return; | 
|  |  | 
|  | ieee80211_beacon_loss(vif); | 
|  |  | 
|  | /* Firmware doesn't report beacon loss events repeatedly. If AP probe | 
|  | * (done by mac80211) succeeds but beacons do not resume then it | 
|  | * doesn't make sense to continue operation. Queue connection loss work | 
|  | * which can be cancelled when beacon is received. | 
|  | */ | 
|  | ieee80211_queue_delayed_work(hw, &arvif->connection_loss_work, | 
|  | ATH10K_CONNECTION_LOSS_HZ); | 
|  | } | 
|  |  | 
|  | void ath10k_mac_handle_beacon_miss(struct ath10k *ar, u32 vdev_id) | 
|  | { | 
|  | ieee80211_iterate_active_interfaces_atomic(ar->hw, | 
|  | IEEE80211_IFACE_ITER_NORMAL, | 
|  | ath10k_mac_handle_beacon_miss_iter, | 
|  | &vdev_id); | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_vif_sta_connection_loss_work(struct work_struct *work) | 
|  | { | 
|  | struct ath10k_vif *arvif = container_of(work, struct ath10k_vif, | 
|  | connection_loss_work.work); | 
|  | struct ieee80211_vif *vif = arvif->vif; | 
|  |  | 
|  | if (!arvif->is_up) | 
|  | return; | 
|  |  | 
|  | ieee80211_connection_loss(vif); | 
|  | } | 
|  |  | 
|  | /**********************/ | 
|  | /* Station management */ | 
|  | /**********************/ | 
|  |  | 
|  | static u32 ath10k_peer_assoc_h_listen_intval(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | /* Some firmware revisions have unstable STA powersave when listen | 
|  | * interval is set too high (e.g. 5). The symptoms are firmware doesn't | 
|  | * generate NullFunc frames properly even if buffered frames have been | 
|  | * indicated in Beacon TIM. Firmware would seldom wake up to pull | 
|  | * buffered frames. Often pinging the device from AP would simply fail. | 
|  | * | 
|  | * As a workaround set it to 1. | 
|  | */ | 
|  | if (vif->type == NL80211_IFTYPE_STATION) | 
|  | return 1; | 
|  |  | 
|  | return ar->hw->conf.listen_interval; | 
|  | } | 
|  |  | 
|  | static void ath10k_peer_assoc_h_basic(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | struct wmi_peer_assoc_complete_arg *arg) | 
|  | { | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | u32 aid; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | if (vif->type == NL80211_IFTYPE_STATION) | 
|  | aid = vif->bss_conf.aid; | 
|  | else | 
|  | aid = sta->aid; | 
|  |  | 
|  | ether_addr_copy(arg->addr, sta->addr); | 
|  | arg->vdev_id = arvif->vdev_id; | 
|  | arg->peer_aid = aid; | 
|  | arg->peer_flags |= arvif->ar->wmi.peer_flags->auth; | 
|  | arg->peer_listen_intval = ath10k_peer_assoc_h_listen_intval(ar, vif); | 
|  | arg->peer_num_spatial_streams = 1; | 
|  | arg->peer_caps = vif->bss_conf.assoc_capability; | 
|  | } | 
|  |  | 
|  | static void ath10k_peer_assoc_h_crypto(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | struct wmi_peer_assoc_complete_arg *arg) | 
|  | { | 
|  | struct ieee80211_bss_conf *info = &vif->bss_conf; | 
|  | struct cfg80211_chan_def def; | 
|  | struct cfg80211_bss *bss; | 
|  | const u8 *rsnie = NULL; | 
|  | const u8 *wpaie = NULL; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | if (WARN_ON(ath10k_mac_vif_chan(vif, &def))) | 
|  | return; | 
|  |  | 
|  | bss = cfg80211_get_bss(ar->hw->wiphy, def.chan, info->bssid, NULL, 0, | 
|  | IEEE80211_BSS_TYPE_ANY, IEEE80211_PRIVACY_ANY); | 
|  | if (bss) { | 
|  | const struct cfg80211_bss_ies *ies; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | rsnie = ieee80211_bss_get_ie(bss, WLAN_EID_RSN); | 
|  |  | 
|  | ies = rcu_dereference(bss->ies); | 
|  |  | 
|  | wpaie = cfg80211_find_vendor_ie(WLAN_OUI_MICROSOFT, | 
|  | WLAN_OUI_TYPE_MICROSOFT_WPA, | 
|  | ies->data, | 
|  | ies->len); | 
|  | rcu_read_unlock(); | 
|  | cfg80211_put_bss(ar->hw->wiphy, bss); | 
|  | } | 
|  |  | 
|  | /* FIXME: base on RSN IE/WPA IE is a correct idea? */ | 
|  | if (rsnie || wpaie) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: rsn ie found\n", __func__); | 
|  | arg->peer_flags |= ar->wmi.peer_flags->need_ptk_4_way; | 
|  | } | 
|  |  | 
|  | if (wpaie) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_WMI, "%s: wpa ie found\n", __func__); | 
|  | arg->peer_flags |= ar->wmi.peer_flags->need_gtk_2_way; | 
|  | } | 
|  |  | 
|  | if (sta->mfp && | 
|  | test_bit(ATH10K_FW_FEATURE_MFP_SUPPORT, | 
|  | ar->running_fw->fw_file.fw_features)) { | 
|  | arg->peer_flags |= ar->wmi.peer_flags->pmf; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath10k_peer_assoc_h_rates(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | struct wmi_peer_assoc_complete_arg *arg) | 
|  | { | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct wmi_rate_set_arg *rateset = &arg->peer_legacy_rates; | 
|  | struct cfg80211_chan_def def; | 
|  | const struct ieee80211_supported_band *sband; | 
|  | const struct ieee80211_rate *rates; | 
|  | enum nl80211_band band; | 
|  | u32 ratemask; | 
|  | u8 rate; | 
|  | int i; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | if (WARN_ON(ath10k_mac_vif_chan(vif, &def))) | 
|  | return; | 
|  |  | 
|  | band = def.chan->band; | 
|  | sband = ar->hw->wiphy->bands[band]; | 
|  | ratemask = sta->supp_rates[band]; | 
|  | ratemask &= arvif->bitrate_mask.control[band].legacy; | 
|  | rates = sband->bitrates; | 
|  |  | 
|  | rateset->num_rates = 0; | 
|  |  | 
|  | for (i = 0; i < 32; i++, ratemask >>= 1, rates++) { | 
|  | if (!(ratemask & 1)) | 
|  | continue; | 
|  |  | 
|  | rate = ath10k_mac_bitrate_to_rate(rates->bitrate); | 
|  | rateset->rates[rateset->num_rates] = rate; | 
|  | rateset->num_rates++; | 
|  | } | 
|  | } | 
|  |  | 
|  | static bool | 
|  | ath10k_peer_assoc_h_ht_masked(const u8 ht_mcs_mask[IEEE80211_HT_MCS_MASK_LEN]) | 
|  | { | 
|  | int nss; | 
|  |  | 
|  | for (nss = 0; nss < IEEE80211_HT_MCS_MASK_LEN; nss++) | 
|  | if (ht_mcs_mask[nss]) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool | 
|  | ath10k_peer_assoc_h_vht_masked(const u16 vht_mcs_mask[NL80211_VHT_NSS_MAX]) | 
|  | { | 
|  | int nss; | 
|  |  | 
|  | for (nss = 0; nss < NL80211_VHT_NSS_MAX; nss++) | 
|  | if (vht_mcs_mask[nss]) | 
|  | return false; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void ath10k_peer_assoc_h_ht(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | struct wmi_peer_assoc_complete_arg *arg) | 
|  | { | 
|  | const struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct cfg80211_chan_def def; | 
|  | enum nl80211_band band; | 
|  | const u8 *ht_mcs_mask; | 
|  | const u16 *vht_mcs_mask; | 
|  | int i, n; | 
|  | u8 max_nss; | 
|  | u32 stbc; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | if (WARN_ON(ath10k_mac_vif_chan(vif, &def))) | 
|  | return; | 
|  |  | 
|  | if (!ht_cap->ht_supported) | 
|  | return; | 
|  |  | 
|  | band = def.chan->band; | 
|  | ht_mcs_mask = arvif->bitrate_mask.control[band].ht_mcs; | 
|  | vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs; | 
|  |  | 
|  | if (ath10k_peer_assoc_h_ht_masked(ht_mcs_mask) && | 
|  | ath10k_peer_assoc_h_vht_masked(vht_mcs_mask)) | 
|  | return; | 
|  |  | 
|  | arg->peer_flags |= ar->wmi.peer_flags->ht; | 
|  | arg->peer_max_mpdu = (1 << (IEEE80211_HT_MAX_AMPDU_FACTOR + | 
|  | ht_cap->ampdu_factor)) - 1; | 
|  |  | 
|  | arg->peer_mpdu_density = | 
|  | ath10k_parse_mpdudensity(ht_cap->ampdu_density); | 
|  |  | 
|  | arg->peer_ht_caps = ht_cap->cap; | 
|  | arg->peer_rate_caps |= WMI_RC_HT_FLAG; | 
|  |  | 
|  | if (ht_cap->cap & IEEE80211_HT_CAP_LDPC_CODING) | 
|  | arg->peer_flags |= ar->wmi.peer_flags->ldbc; | 
|  |  | 
|  | if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) { | 
|  | arg->peer_flags |= ar->wmi.peer_flags->bw40; | 
|  | arg->peer_rate_caps |= WMI_RC_CW40_FLAG; | 
|  | } | 
|  |  | 
|  | if (arvif->bitrate_mask.control[band].gi != NL80211_TXRATE_FORCE_LGI) { | 
|  | if (ht_cap->cap & IEEE80211_HT_CAP_SGI_20) | 
|  | arg->peer_rate_caps |= WMI_RC_SGI_FLAG; | 
|  |  | 
|  | if (ht_cap->cap & IEEE80211_HT_CAP_SGI_40) | 
|  | arg->peer_rate_caps |= WMI_RC_SGI_FLAG; | 
|  | } | 
|  |  | 
|  | if (ht_cap->cap & IEEE80211_HT_CAP_TX_STBC) { | 
|  | arg->peer_rate_caps |= WMI_RC_TX_STBC_FLAG; | 
|  | arg->peer_flags |= ar->wmi.peer_flags->stbc; | 
|  | } | 
|  |  | 
|  | if (ht_cap->cap & IEEE80211_HT_CAP_RX_STBC) { | 
|  | stbc = ht_cap->cap & IEEE80211_HT_CAP_RX_STBC; | 
|  | stbc = stbc >> IEEE80211_HT_CAP_RX_STBC_SHIFT; | 
|  | stbc = stbc << WMI_RC_RX_STBC_FLAG_S; | 
|  | arg->peer_rate_caps |= stbc; | 
|  | arg->peer_flags |= ar->wmi.peer_flags->stbc; | 
|  | } | 
|  |  | 
|  | if (ht_cap->mcs.rx_mask[1] && ht_cap->mcs.rx_mask[2]) | 
|  | arg->peer_rate_caps |= WMI_RC_TS_FLAG; | 
|  | else if (ht_cap->mcs.rx_mask[1]) | 
|  | arg->peer_rate_caps |= WMI_RC_DS_FLAG; | 
|  |  | 
|  | for (i = 0, n = 0, max_nss = 0; i < IEEE80211_HT_MCS_MASK_LEN * 8; i++) | 
|  | if ((ht_cap->mcs.rx_mask[i / 8] & BIT(i % 8)) && | 
|  | (ht_mcs_mask[i / 8] & BIT(i % 8))) { | 
|  | max_nss = (i / 8) + 1; | 
|  | arg->peer_ht_rates.rates[n++] = i; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This is a workaround for HT-enabled STAs which break the spec | 
|  | * and have no HT capabilities RX mask (no HT RX MCS map). | 
|  | * | 
|  | * As per spec, in section 20.3.5 Modulation and coding scheme (MCS), | 
|  | * MCS 0 through 7 are mandatory in 20MHz with 800 ns GI at all STAs. | 
|  | * | 
|  | * Firmware asserts if such situation occurs. | 
|  | */ | 
|  | if (n == 0) { | 
|  | arg->peer_ht_rates.num_rates = 8; | 
|  | for (i = 0; i < arg->peer_ht_rates.num_rates; i++) | 
|  | arg->peer_ht_rates.rates[i] = i; | 
|  | } else { | 
|  | arg->peer_ht_rates.num_rates = n; | 
|  | arg->peer_num_spatial_streams = min(sta->rx_nss, max_nss); | 
|  | } | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n", | 
|  | arg->addr, | 
|  | arg->peer_ht_rates.num_rates, | 
|  | arg->peer_num_spatial_streams); | 
|  | } | 
|  |  | 
|  | static int ath10k_peer_assoc_qos_ap(struct ath10k *ar, | 
|  | struct ath10k_vif *arvif, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | u32 uapsd = 0; | 
|  | u32 max_sp = 0; | 
|  | int ret = 0; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | if (sta->wme && sta->uapsd_queues) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac uapsd_queues 0x%x max_sp %d\n", | 
|  | sta->uapsd_queues, sta->max_sp); | 
|  |  | 
|  | if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) | 
|  | uapsd |= WMI_AP_PS_UAPSD_AC3_DELIVERY_EN | | 
|  | WMI_AP_PS_UAPSD_AC3_TRIGGER_EN; | 
|  | if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI) | 
|  | uapsd |= WMI_AP_PS_UAPSD_AC2_DELIVERY_EN | | 
|  | WMI_AP_PS_UAPSD_AC2_TRIGGER_EN; | 
|  | if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK) | 
|  | uapsd |= WMI_AP_PS_UAPSD_AC1_DELIVERY_EN | | 
|  | WMI_AP_PS_UAPSD_AC1_TRIGGER_EN; | 
|  | if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE) | 
|  | uapsd |= WMI_AP_PS_UAPSD_AC0_DELIVERY_EN | | 
|  | WMI_AP_PS_UAPSD_AC0_TRIGGER_EN; | 
|  |  | 
|  | if (sta->max_sp < MAX_WMI_AP_PS_PEER_PARAM_MAX_SP) | 
|  | max_sp = sta->max_sp; | 
|  |  | 
|  | ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, | 
|  | sta->addr, | 
|  | WMI_AP_PS_PEER_PARAM_UAPSD, | 
|  | uapsd); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set ap ps peer param uapsd for vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, | 
|  | sta->addr, | 
|  | WMI_AP_PS_PEER_PARAM_MAX_SP, | 
|  | max_sp); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set ap ps peer param max sp for vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* TODO setup this based on STA listen interval and | 
|  | * beacon interval. Currently we don't know | 
|  | * sta->listen_interval - mac80211 patch required. | 
|  | * Currently use 10 seconds | 
|  | */ | 
|  | ret = ath10k_wmi_set_ap_ps_param(ar, arvif->vdev_id, sta->addr, | 
|  | WMI_AP_PS_PEER_PARAM_AGEOUT_TIME, | 
|  | 10); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set ap ps peer param ageout time for vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static u16 | 
|  | ath10k_peer_assoc_h_vht_limit(u16 tx_mcs_set, | 
|  | const u16 vht_mcs_limit[NL80211_VHT_NSS_MAX]) | 
|  | { | 
|  | int idx_limit; | 
|  | int nss; | 
|  | u16 mcs_map; | 
|  | u16 mcs; | 
|  |  | 
|  | for (nss = 0; nss < NL80211_VHT_NSS_MAX; nss++) { | 
|  | mcs_map = ath10k_mac_get_max_vht_mcs_map(tx_mcs_set, nss) & | 
|  | vht_mcs_limit[nss]; | 
|  |  | 
|  | if (mcs_map) | 
|  | idx_limit = fls(mcs_map) - 1; | 
|  | else | 
|  | idx_limit = -1; | 
|  |  | 
|  | switch (idx_limit) { | 
|  | case 0: /* fall through */ | 
|  | case 1: /* fall through */ | 
|  | case 2: /* fall through */ | 
|  | case 3: /* fall through */ | 
|  | case 4: /* fall through */ | 
|  | case 5: /* fall through */ | 
|  | case 6: /* fall through */ | 
|  | default: | 
|  | /* see ath10k_mac_can_set_bitrate_mask() */ | 
|  | WARN_ON(1); | 
|  | /* fall through */ | 
|  | case -1: | 
|  | mcs = IEEE80211_VHT_MCS_NOT_SUPPORTED; | 
|  | break; | 
|  | case 7: | 
|  | mcs = IEEE80211_VHT_MCS_SUPPORT_0_7; | 
|  | break; | 
|  | case 8: | 
|  | mcs = IEEE80211_VHT_MCS_SUPPORT_0_8; | 
|  | break; | 
|  | case 9: | 
|  | mcs = IEEE80211_VHT_MCS_SUPPORT_0_9; | 
|  | break; | 
|  | } | 
|  |  | 
|  | tx_mcs_set &= ~(0x3 << (nss * 2)); | 
|  | tx_mcs_set |= mcs << (nss * 2); | 
|  | } | 
|  |  | 
|  | return tx_mcs_set; | 
|  | } | 
|  |  | 
|  | static void ath10k_peer_assoc_h_vht(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | struct wmi_peer_assoc_complete_arg *arg) | 
|  | { | 
|  | const struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct cfg80211_chan_def def; | 
|  | enum nl80211_band band; | 
|  | const u16 *vht_mcs_mask; | 
|  | u8 ampdu_factor; | 
|  | u8 max_nss, vht_mcs; | 
|  | int i; | 
|  |  | 
|  | if (WARN_ON(ath10k_mac_vif_chan(vif, &def))) | 
|  | return; | 
|  |  | 
|  | if (!vht_cap->vht_supported) | 
|  | return; | 
|  |  | 
|  | band = def.chan->band; | 
|  | vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs; | 
|  |  | 
|  | if (ath10k_peer_assoc_h_vht_masked(vht_mcs_mask)) | 
|  | return; | 
|  |  | 
|  | arg->peer_flags |= ar->wmi.peer_flags->vht; | 
|  |  | 
|  | if (def.chan->band == NL80211_BAND_2GHZ) | 
|  | arg->peer_flags |= ar->wmi.peer_flags->vht_2g; | 
|  |  | 
|  | arg->peer_vht_caps = vht_cap->cap; | 
|  |  | 
|  | ampdu_factor = (vht_cap->cap & | 
|  | IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK) >> | 
|  | IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT; | 
|  |  | 
|  | /* Workaround: Some Netgear/Linksys 11ac APs set Rx A-MPDU factor to | 
|  | * zero in VHT IE. Using it would result in degraded throughput. | 
|  | * arg->peer_max_mpdu at this point contains HT max_mpdu so keep | 
|  | * it if VHT max_mpdu is smaller. | 
|  | */ | 
|  | arg->peer_max_mpdu = max(arg->peer_max_mpdu, | 
|  | (1U << (IEEE80211_HT_MAX_AMPDU_FACTOR + | 
|  | ampdu_factor)) - 1); | 
|  |  | 
|  | if (sta->bandwidth == IEEE80211_STA_RX_BW_80) | 
|  | arg->peer_flags |= ar->wmi.peer_flags->bw80; | 
|  |  | 
|  | if (sta->bandwidth == IEEE80211_STA_RX_BW_160) | 
|  | arg->peer_flags |= ar->wmi.peer_flags->bw160; | 
|  |  | 
|  | /* Calculate peer NSS capability from VHT capabilities if STA | 
|  | * supports VHT. | 
|  | */ | 
|  | for (i = 0, max_nss = 0, vht_mcs = 0; i < NL80211_VHT_NSS_MAX; i++) { | 
|  | vht_mcs = __le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map) >> | 
|  | (2 * i) & 3; | 
|  |  | 
|  | if ((vht_mcs != IEEE80211_VHT_MCS_NOT_SUPPORTED) && | 
|  | vht_mcs_mask[i]) | 
|  | max_nss = i + 1; | 
|  | } | 
|  | arg->peer_num_spatial_streams = min(sta->rx_nss, max_nss); | 
|  | arg->peer_vht_rates.rx_max_rate = | 
|  | __le16_to_cpu(vht_cap->vht_mcs.rx_highest); | 
|  | arg->peer_vht_rates.rx_mcs_set = | 
|  | __le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map); | 
|  | arg->peer_vht_rates.tx_max_rate = | 
|  | __le16_to_cpu(vht_cap->vht_mcs.tx_highest); | 
|  | arg->peer_vht_rates.tx_mcs_set = ath10k_peer_assoc_h_vht_limit( | 
|  | __le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map), vht_mcs_mask); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n", | 
|  | sta->addr, arg->peer_max_mpdu, arg->peer_flags); | 
|  |  | 
|  | if (arg->peer_vht_rates.rx_max_rate && | 
|  | (sta->vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK)) { | 
|  | switch (arg->peer_vht_rates.rx_max_rate) { | 
|  | case 1560: | 
|  | /* Must be 2x2 at 160Mhz is all it can do. */ | 
|  | arg->peer_bw_rxnss_override = 2; | 
|  | break; | 
|  | case 780: | 
|  | /* Can only do 1x1 at 160Mhz (Long Guard Interval) */ | 
|  | arg->peer_bw_rxnss_override = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath10k_peer_assoc_h_qos(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | struct wmi_peer_assoc_complete_arg *arg) | 
|  | { | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  |  | 
|  | switch (arvif->vdev_type) { | 
|  | case WMI_VDEV_TYPE_AP: | 
|  | if (sta->wme) | 
|  | arg->peer_flags |= arvif->ar->wmi.peer_flags->qos; | 
|  |  | 
|  | if (sta->wme && sta->uapsd_queues) { | 
|  | arg->peer_flags |= arvif->ar->wmi.peer_flags->apsd; | 
|  | arg->peer_rate_caps |= WMI_RC_UAPSD_FLAG; | 
|  | } | 
|  | break; | 
|  | case WMI_VDEV_TYPE_STA: | 
|  | if (sta->wme) | 
|  | arg->peer_flags |= arvif->ar->wmi.peer_flags->qos; | 
|  | break; | 
|  | case WMI_VDEV_TYPE_IBSS: | 
|  | if (sta->wme) | 
|  | arg->peer_flags |= arvif->ar->wmi.peer_flags->qos; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM qos %d\n", | 
|  | sta->addr, !!(arg->peer_flags & | 
|  | arvif->ar->wmi.peer_flags->qos)); | 
|  | } | 
|  |  | 
|  | static bool ath10k_mac_sta_has_ofdm_only(struct ieee80211_sta *sta) | 
|  | { | 
|  | return sta->supp_rates[NL80211_BAND_2GHZ] >> | 
|  | ATH10K_MAC_FIRST_OFDM_RATE_IDX; | 
|  | } | 
|  |  | 
|  | static enum wmi_phy_mode ath10k_mac_get_phymode_vht(struct ath10k *ar, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | if (sta->bandwidth == IEEE80211_STA_RX_BW_160) { | 
|  | switch (sta->vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) { | 
|  | case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ: | 
|  | return MODE_11AC_VHT160; | 
|  | case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ: | 
|  | return MODE_11AC_VHT80_80; | 
|  | default: | 
|  | /* not sure if this is a valid case? */ | 
|  | return MODE_11AC_VHT160; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (sta->bandwidth == IEEE80211_STA_RX_BW_80) | 
|  | return MODE_11AC_VHT80; | 
|  |  | 
|  | if (sta->bandwidth == IEEE80211_STA_RX_BW_40) | 
|  | return MODE_11AC_VHT40; | 
|  |  | 
|  | if (sta->bandwidth == IEEE80211_STA_RX_BW_20) | 
|  | return MODE_11AC_VHT20; | 
|  |  | 
|  | return MODE_UNKNOWN; | 
|  | } | 
|  |  | 
|  | static void ath10k_peer_assoc_h_phymode(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | struct wmi_peer_assoc_complete_arg *arg) | 
|  | { | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct cfg80211_chan_def def; | 
|  | enum nl80211_band band; | 
|  | const u8 *ht_mcs_mask; | 
|  | const u16 *vht_mcs_mask; | 
|  | enum wmi_phy_mode phymode = MODE_UNKNOWN; | 
|  |  | 
|  | if (WARN_ON(ath10k_mac_vif_chan(vif, &def))) | 
|  | return; | 
|  |  | 
|  | band = def.chan->band; | 
|  | ht_mcs_mask = arvif->bitrate_mask.control[band].ht_mcs; | 
|  | vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs; | 
|  |  | 
|  | switch (band) { | 
|  | case NL80211_BAND_2GHZ: | 
|  | if (sta->vht_cap.vht_supported && | 
|  | !ath10k_peer_assoc_h_vht_masked(vht_mcs_mask)) { | 
|  | if (sta->bandwidth == IEEE80211_STA_RX_BW_40) | 
|  | phymode = MODE_11AC_VHT40; | 
|  | else | 
|  | phymode = MODE_11AC_VHT20; | 
|  | } else if (sta->ht_cap.ht_supported && | 
|  | !ath10k_peer_assoc_h_ht_masked(ht_mcs_mask)) { | 
|  | if (sta->bandwidth == IEEE80211_STA_RX_BW_40) | 
|  | phymode = MODE_11NG_HT40; | 
|  | else | 
|  | phymode = MODE_11NG_HT20; | 
|  | } else if (ath10k_mac_sta_has_ofdm_only(sta)) { | 
|  | phymode = MODE_11G; | 
|  | } else { | 
|  | phymode = MODE_11B; | 
|  | } | 
|  |  | 
|  | break; | 
|  | case NL80211_BAND_5GHZ: | 
|  | /* | 
|  | * Check VHT first. | 
|  | */ | 
|  | if (sta->vht_cap.vht_supported && | 
|  | !ath10k_peer_assoc_h_vht_masked(vht_mcs_mask)) { | 
|  | phymode = ath10k_mac_get_phymode_vht(ar, sta); | 
|  | } else if (sta->ht_cap.ht_supported && | 
|  | !ath10k_peer_assoc_h_ht_masked(ht_mcs_mask)) { | 
|  | if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) | 
|  | phymode = MODE_11NA_HT40; | 
|  | else | 
|  | phymode = MODE_11NA_HT20; | 
|  | } else { | 
|  | phymode = MODE_11A; | 
|  | } | 
|  |  | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac peer %pM phymode %s\n", | 
|  | sta->addr, ath10k_wmi_phymode_str(phymode)); | 
|  |  | 
|  | arg->peer_phymode = phymode; | 
|  | WARN_ON(phymode == MODE_UNKNOWN); | 
|  | } | 
|  |  | 
|  | static int ath10k_peer_assoc_prepare(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | struct wmi_peer_assoc_complete_arg *arg) | 
|  | { | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | memset(arg, 0, sizeof(*arg)); | 
|  |  | 
|  | ath10k_peer_assoc_h_basic(ar, vif, sta, arg); | 
|  | ath10k_peer_assoc_h_crypto(ar, vif, sta, arg); | 
|  | ath10k_peer_assoc_h_rates(ar, vif, sta, arg); | 
|  | ath10k_peer_assoc_h_ht(ar, vif, sta, arg); | 
|  | ath10k_peer_assoc_h_vht(ar, vif, sta, arg); | 
|  | ath10k_peer_assoc_h_qos(ar, vif, sta, arg); | 
|  | ath10k_peer_assoc_h_phymode(ar, vif, sta, arg); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const u32 ath10k_smps_map[] = { | 
|  | [WLAN_HT_CAP_SM_PS_STATIC] = WMI_PEER_SMPS_STATIC, | 
|  | [WLAN_HT_CAP_SM_PS_DYNAMIC] = WMI_PEER_SMPS_DYNAMIC, | 
|  | [WLAN_HT_CAP_SM_PS_INVALID] = WMI_PEER_SMPS_PS_NONE, | 
|  | [WLAN_HT_CAP_SM_PS_DISABLED] = WMI_PEER_SMPS_PS_NONE, | 
|  | }; | 
|  |  | 
|  | static int ath10k_setup_peer_smps(struct ath10k *ar, struct ath10k_vif *arvif, | 
|  | const u8 *addr, | 
|  | const struct ieee80211_sta_ht_cap *ht_cap) | 
|  | { | 
|  | int smps; | 
|  |  | 
|  | if (!ht_cap->ht_supported) | 
|  | return 0; | 
|  |  | 
|  | smps = ht_cap->cap & IEEE80211_HT_CAP_SM_PS; | 
|  | smps >>= IEEE80211_HT_CAP_SM_PS_SHIFT; | 
|  |  | 
|  | if (smps >= ARRAY_SIZE(ath10k_smps_map)) | 
|  | return -EINVAL; | 
|  |  | 
|  | return ath10k_wmi_peer_set_param(ar, arvif->vdev_id, addr, | 
|  | WMI_PEER_SMPS_STATE, | 
|  | ath10k_smps_map[smps]); | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_vif_recalc_txbf(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta_vht_cap vht_cap) | 
|  | { | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | int ret; | 
|  | u32 param; | 
|  | u32 value; | 
|  |  | 
|  | if (ath10k_wmi_get_txbf_conf_scheme(ar) != WMI_TXBF_CONF_AFTER_ASSOC) | 
|  | return 0; | 
|  |  | 
|  | if (!(ar->vht_cap_info & | 
|  | (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | | 
|  | IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE | | 
|  | IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | | 
|  | IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE))) | 
|  | return 0; | 
|  |  | 
|  | param = ar->wmi.vdev_param->txbf; | 
|  | value = 0; | 
|  |  | 
|  | if (WARN_ON(param == WMI_VDEV_PARAM_UNSUPPORTED)) | 
|  | return 0; | 
|  |  | 
|  | /* The following logic is correct. If a remote STA advertises support | 
|  | * for being a beamformer then we should enable us being a beamformee. | 
|  | */ | 
|  |  | 
|  | if (ar->vht_cap_info & | 
|  | (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | | 
|  | IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) { | 
|  | if (vht_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE) | 
|  | value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE; | 
|  |  | 
|  | if (vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE) | 
|  | value |= WMI_VDEV_PARAM_TXBF_MU_TX_BFEE; | 
|  | } | 
|  |  | 
|  | if (ar->vht_cap_info & | 
|  | (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | | 
|  | IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) { | 
|  | if (vht_cap.cap & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE) | 
|  | value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER; | 
|  |  | 
|  | if (vht_cap.cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) | 
|  | value |= WMI_VDEV_PARAM_TXBF_MU_TX_BFER; | 
|  | } | 
|  |  | 
|  | if (value & WMI_VDEV_PARAM_TXBF_MU_TX_BFEE) | 
|  | value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE; | 
|  |  | 
|  | if (value & WMI_VDEV_PARAM_TXBF_MU_TX_BFER) | 
|  | value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER; | 
|  |  | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, param, value); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to submit vdev param txbf 0x%x: %d\n", | 
|  | value, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* can be called only in mac80211 callbacks due to `key_count` usage */ | 
|  | static void ath10k_bss_assoc(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_bss_conf *bss_conf) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct ieee80211_sta_ht_cap ht_cap; | 
|  | struct ieee80211_sta_vht_cap vht_cap; | 
|  | struct wmi_peer_assoc_complete_arg peer_arg; | 
|  | struct ieee80211_sta *ap_sta; | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i assoc bssid %pM aid %d\n", | 
|  | arvif->vdev_id, arvif->bssid, arvif->aid); | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | ap_sta = ieee80211_find_sta(vif, bss_conf->bssid); | 
|  | if (!ap_sta) { | 
|  | ath10k_warn(ar, "failed to find station entry for bss %pM vdev %i\n", | 
|  | bss_conf->bssid, arvif->vdev_id); | 
|  | rcu_read_unlock(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* ap_sta must be accessed only within rcu section which must be left | 
|  | * before calling ath10k_setup_peer_smps() which might sleep. | 
|  | */ | 
|  | ht_cap = ap_sta->ht_cap; | 
|  | vht_cap = ap_sta->vht_cap; | 
|  |  | 
|  | ret = ath10k_peer_assoc_prepare(ar, vif, ap_sta, &peer_arg); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to prepare peer assoc for %pM vdev %i: %d\n", | 
|  | bss_conf->bssid, arvif->vdev_id, ret); | 
|  | rcu_read_unlock(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | rcu_read_unlock(); | 
|  |  | 
|  | ret = ath10k_wmi_peer_assoc(ar, &peer_arg); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to run peer assoc for %pM vdev %i: %d\n", | 
|  | bss_conf->bssid, arvif->vdev_id, ret); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ret = ath10k_setup_peer_smps(ar, arvif, bss_conf->bssid, &ht_cap); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to setup peer SMPS for vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ret = ath10k_mac_vif_recalc_txbf(ar, vif, vht_cap); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to recalc txbf for vdev %i on bss %pM: %d\n", | 
|  | arvif->vdev_id, bss_conf->bssid, ret); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac vdev %d up (associated) bssid %pM aid %d\n", | 
|  | arvif->vdev_id, bss_conf->bssid, bss_conf->aid); | 
|  |  | 
|  | WARN_ON(arvif->is_up); | 
|  |  | 
|  | arvif->aid = bss_conf->aid; | 
|  | ether_addr_copy(arvif->bssid, bss_conf->bssid); | 
|  |  | 
|  | ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, arvif->aid, arvif->bssid); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set vdev %d up: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return; | 
|  | } | 
|  |  | 
|  | arvif->is_up = true; | 
|  |  | 
|  | /* Workaround: Some firmware revisions (tested with qca6174 | 
|  | * WLAN.RM.2.0-00073) have buggy powersave state machine and must be | 
|  | * poked with peer param command. | 
|  | */ | 
|  | ret = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, arvif->bssid, | 
|  | WMI_PEER_DUMMY_VAR, 1); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to poke peer %pM param for ps workaround on vdev %i: %d\n", | 
|  | arvif->bssid, arvif->vdev_id, ret); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath10k_bss_disassoc(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct ieee80211_sta_vht_cap vht_cap = {}; | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i disassoc bssid %pM\n", | 
|  | arvif->vdev_id, arvif->bssid); | 
|  |  | 
|  | ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to down vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  |  | 
|  | arvif->def_wep_key_idx = -1; | 
|  |  | 
|  | ret = ath10k_mac_vif_recalc_txbf(ar, vif, vht_cap); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to recalc txbf for vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return; | 
|  | } | 
|  |  | 
|  | arvif->is_up = false; | 
|  |  | 
|  | cancel_delayed_work_sync(&arvif->connection_loss_work); | 
|  | } | 
|  |  | 
|  | static int ath10k_station_assoc(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | bool reassoc) | 
|  | { | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct wmi_peer_assoc_complete_arg peer_arg; | 
|  | int ret = 0; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | ret = ath10k_peer_assoc_prepare(ar, vif, sta, &peer_arg); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to prepare WMI peer assoc for %pM vdev %i: %i\n", | 
|  | sta->addr, arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = ath10k_wmi_peer_assoc(ar, &peer_arg); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to run peer assoc for STA %pM vdev %i: %d\n", | 
|  | sta->addr, arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Re-assoc is run only to update supported rates for given station. It | 
|  | * doesn't make much sense to reconfigure the peer completely. | 
|  | */ | 
|  | if (!reassoc) { | 
|  | ret = ath10k_setup_peer_smps(ar, arvif, sta->addr, | 
|  | &sta->ht_cap); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to setup peer SMPS for vdev %d: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = ath10k_peer_assoc_qos_ap(ar, arvif, sta); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set qos params for STA %pM for vdev %i: %d\n", | 
|  | sta->addr, arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (!sta->wme) { | 
|  | arvif->num_legacy_stations++; | 
|  | ret  = ath10k_recalc_rtscts_prot(arvif); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Plumb cached keys only for static WEP */ | 
|  | if ((arvif->def_wep_key_idx != -1) && (!sta->tdls)) { | 
|  | ret = ath10k_install_peer_wep_keys(arvif, sta->addr); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to install peer wep keys for vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ath10k_station_disassoc(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | int ret = 0; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | if (!sta->wme) { | 
|  | arvif->num_legacy_stations--; | 
|  | ret = ath10k_recalc_rtscts_prot(arvif); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = ath10k_clear_peer_keys(arvif, sta->addr); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to clear all peer wep keys for vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /**************/ | 
|  | /* Regulatory */ | 
|  | /**************/ | 
|  |  | 
|  | static int ath10k_update_channel_list(struct ath10k *ar) | 
|  | { | 
|  | struct ieee80211_hw *hw = ar->hw; | 
|  | struct ieee80211_supported_band **bands; | 
|  | enum nl80211_band band; | 
|  | struct ieee80211_channel *channel; | 
|  | struct wmi_scan_chan_list_arg arg = {0}; | 
|  | struct wmi_channel_arg *ch; | 
|  | bool passive; | 
|  | int len; | 
|  | int ret; | 
|  | int i; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | bands = hw->wiphy->bands; | 
|  | for (band = 0; band < NUM_NL80211_BANDS; band++) { | 
|  | if (!bands[band]) | 
|  | continue; | 
|  |  | 
|  | for (i = 0; i < bands[band]->n_channels; i++) { | 
|  | if (bands[band]->channels[i].flags & | 
|  | IEEE80211_CHAN_DISABLED) | 
|  | continue; | 
|  |  | 
|  | arg.n_channels++; | 
|  | } | 
|  | } | 
|  |  | 
|  | len = sizeof(struct wmi_channel_arg) * arg.n_channels; | 
|  | arg.channels = kzalloc(len, GFP_KERNEL); | 
|  | if (!arg.channels) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ch = arg.channels; | 
|  | for (band = 0; band < NUM_NL80211_BANDS; band++) { | 
|  | if (!bands[band]) | 
|  | continue; | 
|  |  | 
|  | for (i = 0; i < bands[band]->n_channels; i++) { | 
|  | channel = &bands[band]->channels[i]; | 
|  |  | 
|  | if (channel->flags & IEEE80211_CHAN_DISABLED) | 
|  | continue; | 
|  |  | 
|  | ch->allow_ht = true; | 
|  |  | 
|  | /* FIXME: when should we really allow VHT? */ | 
|  | ch->allow_vht = true; | 
|  |  | 
|  | ch->allow_ibss = | 
|  | !(channel->flags & IEEE80211_CHAN_NO_IR); | 
|  |  | 
|  | ch->ht40plus = | 
|  | !(channel->flags & IEEE80211_CHAN_NO_HT40PLUS); | 
|  |  | 
|  | ch->chan_radar = | 
|  | !!(channel->flags & IEEE80211_CHAN_RADAR); | 
|  |  | 
|  | passive = channel->flags & IEEE80211_CHAN_NO_IR; | 
|  | ch->passive = passive; | 
|  |  | 
|  | /* the firmware is ignoring the "radar" flag of the | 
|  | * channel and is scanning actively using Probe Requests | 
|  | * on "Radar detection"/DFS channels which are not | 
|  | * marked as "available" | 
|  | */ | 
|  | ch->passive |= ch->chan_radar; | 
|  |  | 
|  | ch->freq = channel->center_freq; | 
|  | ch->band_center_freq1 = channel->center_freq; | 
|  | ch->min_power = 0; | 
|  | ch->max_power = channel->max_power * 2; | 
|  | ch->max_reg_power = channel->max_reg_power * 2; | 
|  | ch->max_antenna_gain = channel->max_antenna_gain * 2; | 
|  | ch->reg_class_id = 0; /* FIXME */ | 
|  |  | 
|  | /* FIXME: why use only legacy modes, why not any | 
|  | * HT/VHT modes? Would that even make any | 
|  | * difference? | 
|  | */ | 
|  | if (channel->band == NL80211_BAND_2GHZ) | 
|  | ch->mode = MODE_11G; | 
|  | else | 
|  | ch->mode = MODE_11A; | 
|  |  | 
|  | if (WARN_ON_ONCE(ch->mode == MODE_UNKNOWN)) | 
|  | continue; | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_WMI, | 
|  | "mac channel [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n", | 
|  | ch - arg.channels, arg.n_channels, | 
|  | ch->freq, ch->max_power, ch->max_reg_power, | 
|  | ch->max_antenna_gain, ch->mode); | 
|  |  | 
|  | ch++; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = ath10k_wmi_scan_chan_list(ar, &arg); | 
|  | kfree(arg.channels); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static enum wmi_dfs_region | 
|  | ath10k_mac_get_dfs_region(enum nl80211_dfs_regions dfs_region) | 
|  | { | 
|  | switch (dfs_region) { | 
|  | case NL80211_DFS_UNSET: | 
|  | return WMI_UNINIT_DFS_DOMAIN; | 
|  | case NL80211_DFS_FCC: | 
|  | return WMI_FCC_DFS_DOMAIN; | 
|  | case NL80211_DFS_ETSI: | 
|  | return WMI_ETSI_DFS_DOMAIN; | 
|  | case NL80211_DFS_JP: | 
|  | return WMI_MKK4_DFS_DOMAIN; | 
|  | } | 
|  | return WMI_UNINIT_DFS_DOMAIN; | 
|  | } | 
|  |  | 
|  | static void ath10k_regd_update(struct ath10k *ar) | 
|  | { | 
|  | struct reg_dmn_pair_mapping *regpair; | 
|  | int ret; | 
|  | enum wmi_dfs_region wmi_dfs_reg; | 
|  | enum nl80211_dfs_regions nl_dfs_reg; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | ret = ath10k_update_channel_list(ar); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to update channel list: %d\n", ret); | 
|  |  | 
|  | regpair = ar->ath_common.regulatory.regpair; | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) { | 
|  | nl_dfs_reg = ar->dfs_detector->region; | 
|  | wmi_dfs_reg = ath10k_mac_get_dfs_region(nl_dfs_reg); | 
|  | } else { | 
|  | wmi_dfs_reg = WMI_UNINIT_DFS_DOMAIN; | 
|  | } | 
|  |  | 
|  | /* Target allows setting up per-band regdomain but ath_common provides | 
|  | * a combined one only | 
|  | */ | 
|  | ret = ath10k_wmi_pdev_set_regdomain(ar, | 
|  | regpair->reg_domain, | 
|  | regpair->reg_domain, /* 2ghz */ | 
|  | regpair->reg_domain, /* 5ghz */ | 
|  | regpair->reg_2ghz_ctl, | 
|  | regpair->reg_5ghz_ctl, | 
|  | wmi_dfs_reg); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to set pdev regdomain: %d\n", ret); | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_update_channel_list(struct ath10k *ar, | 
|  | struct ieee80211_supported_band *band) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (ar->low_5ghz_chan && ar->high_5ghz_chan) { | 
|  | for (i = 0; i < band->n_channels; i++) { | 
|  | if (band->channels[i].center_freq < ar->low_5ghz_chan || | 
|  | band->channels[i].center_freq > ar->high_5ghz_chan) | 
|  | band->channels[i].flags |= | 
|  | IEEE80211_CHAN_DISABLED; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath10k_reg_notifier(struct wiphy *wiphy, | 
|  | struct regulatory_request *request) | 
|  | { | 
|  | struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); | 
|  | struct ath10k *ar = hw->priv; | 
|  | bool result; | 
|  |  | 
|  | ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory); | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_REGULATORY, "dfs region 0x%x\n", | 
|  | request->dfs_region); | 
|  | result = ar->dfs_detector->set_dfs_domain(ar->dfs_detector, | 
|  | request->dfs_region); | 
|  | if (!result) | 
|  | ath10k_warn(ar, "DFS region 0x%X not supported, will trigger radar for every pulse\n", | 
|  | request->dfs_region); | 
|  | } | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  | if (ar->state == ATH10K_STATE_ON) | 
|  | ath10k_regd_update(ar); | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  |  | 
|  | if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) | 
|  | ath10k_mac_update_channel_list(ar, | 
|  | ar->hw->wiphy->bands[NL80211_BAND_5GHZ]); | 
|  | } | 
|  |  | 
|  | static void ath10k_stop_radar_confirmation(struct ath10k *ar) | 
|  | { | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | ar->radar_conf_state = ATH10K_RADAR_CONFIRMATION_STOPPED; | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | cancel_work_sync(&ar->radar_confirmation_work); | 
|  | } | 
|  |  | 
|  | /***************/ | 
|  | /* TX handlers */ | 
|  | /***************/ | 
|  |  | 
|  | enum ath10k_mac_tx_path { | 
|  | ATH10K_MAC_TX_HTT, | 
|  | ATH10K_MAC_TX_HTT_MGMT, | 
|  | ATH10K_MAC_TX_WMI_MGMT, | 
|  | ATH10K_MAC_TX_UNKNOWN, | 
|  | }; | 
|  |  | 
|  | void ath10k_mac_tx_lock(struct ath10k *ar, int reason) | 
|  | { | 
|  | lockdep_assert_held(&ar->htt.tx_lock); | 
|  |  | 
|  | WARN_ON(reason >= ATH10K_TX_PAUSE_MAX); | 
|  | ar->tx_paused |= BIT(reason); | 
|  | ieee80211_stop_queues(ar->hw); | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_tx_unlock_iter(void *data, u8 *mac, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath10k *ar = data; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  |  | 
|  | if (arvif->tx_paused) | 
|  | return; | 
|  |  | 
|  | ieee80211_wake_queue(ar->hw, arvif->vdev_id); | 
|  | } | 
|  |  | 
|  | void ath10k_mac_tx_unlock(struct ath10k *ar, int reason) | 
|  | { | 
|  | lockdep_assert_held(&ar->htt.tx_lock); | 
|  |  | 
|  | WARN_ON(reason >= ATH10K_TX_PAUSE_MAX); | 
|  | ar->tx_paused &= ~BIT(reason); | 
|  |  | 
|  | if (ar->tx_paused) | 
|  | return; | 
|  |  | 
|  | ieee80211_iterate_active_interfaces_atomic(ar->hw, | 
|  | IEEE80211_IFACE_ITER_RESUME_ALL, | 
|  | ath10k_mac_tx_unlock_iter, | 
|  | ar); | 
|  |  | 
|  | ieee80211_wake_queue(ar->hw, ar->hw->offchannel_tx_hw_queue); | 
|  | } | 
|  |  | 
|  | void ath10k_mac_vif_tx_lock(struct ath10k_vif *arvif, int reason) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  |  | 
|  | lockdep_assert_held(&ar->htt.tx_lock); | 
|  |  | 
|  | WARN_ON(reason >= BITS_PER_LONG); | 
|  | arvif->tx_paused |= BIT(reason); | 
|  | ieee80211_stop_queue(ar->hw, arvif->vdev_id); | 
|  | } | 
|  |  | 
|  | void ath10k_mac_vif_tx_unlock(struct ath10k_vif *arvif, int reason) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  |  | 
|  | lockdep_assert_held(&ar->htt.tx_lock); | 
|  |  | 
|  | WARN_ON(reason >= BITS_PER_LONG); | 
|  | arvif->tx_paused &= ~BIT(reason); | 
|  |  | 
|  | if (ar->tx_paused) | 
|  | return; | 
|  |  | 
|  | if (arvif->tx_paused) | 
|  | return; | 
|  |  | 
|  | ieee80211_wake_queue(ar->hw, arvif->vdev_id); | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_vif_handle_tx_pause(struct ath10k_vif *arvif, | 
|  | enum wmi_tlv_tx_pause_id pause_id, | 
|  | enum wmi_tlv_tx_pause_action action) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  |  | 
|  | lockdep_assert_held(&ar->htt.tx_lock); | 
|  |  | 
|  | switch (action) { | 
|  | case WMI_TLV_TX_PAUSE_ACTION_STOP: | 
|  | ath10k_mac_vif_tx_lock(arvif, pause_id); | 
|  | break; | 
|  | case WMI_TLV_TX_PAUSE_ACTION_WAKE: | 
|  | ath10k_mac_vif_tx_unlock(arvif, pause_id); | 
|  | break; | 
|  | default: | 
|  | ath10k_dbg(ar, ATH10K_DBG_BOOT, | 
|  | "received unknown tx pause action %d on vdev %i, ignoring\n", | 
|  | action, arvif->vdev_id); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | struct ath10k_mac_tx_pause { | 
|  | u32 vdev_id; | 
|  | enum wmi_tlv_tx_pause_id pause_id; | 
|  | enum wmi_tlv_tx_pause_action action; | 
|  | }; | 
|  |  | 
|  | static void ath10k_mac_handle_tx_pause_iter(void *data, u8 *mac, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct ath10k_mac_tx_pause *arg = data; | 
|  |  | 
|  | if (arvif->vdev_id != arg->vdev_id) | 
|  | return; | 
|  |  | 
|  | ath10k_mac_vif_handle_tx_pause(arvif, arg->pause_id, arg->action); | 
|  | } | 
|  |  | 
|  | void ath10k_mac_handle_tx_pause_vdev(struct ath10k *ar, u32 vdev_id, | 
|  | enum wmi_tlv_tx_pause_id pause_id, | 
|  | enum wmi_tlv_tx_pause_action action) | 
|  | { | 
|  | struct ath10k_mac_tx_pause arg = { | 
|  | .vdev_id = vdev_id, | 
|  | .pause_id = pause_id, | 
|  | .action = action, | 
|  | }; | 
|  |  | 
|  | spin_lock_bh(&ar->htt.tx_lock); | 
|  | ieee80211_iterate_active_interfaces_atomic(ar->hw, | 
|  | IEEE80211_IFACE_ITER_RESUME_ALL, | 
|  | ath10k_mac_handle_tx_pause_iter, | 
|  | &arg); | 
|  | spin_unlock_bh(&ar->htt.tx_lock); | 
|  | } | 
|  |  | 
|  | static enum ath10k_hw_txrx_mode | 
|  | ath10k_mac_tx_h_get_txmode(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | const struct ieee80211_hdr *hdr = (void *)skb->data; | 
|  | const struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb); | 
|  | __le16 fc = hdr->frame_control; | 
|  |  | 
|  | if (!vif || vif->type == NL80211_IFTYPE_MONITOR) | 
|  | return ATH10K_HW_TXRX_RAW; | 
|  |  | 
|  | if (ieee80211_is_mgmt(fc)) | 
|  | return ATH10K_HW_TXRX_MGMT; | 
|  |  | 
|  | /* Workaround: | 
|  | * | 
|  | * NullFunc frames are mostly used to ping if a client or AP are still | 
|  | * reachable and responsive. This implies tx status reports must be | 
|  | * accurate - otherwise either mac80211 or userspace (e.g. hostapd) can | 
|  | * come to a conclusion that the other end disappeared and tear down | 
|  | * BSS connection or it can never disconnect from BSS/client (which is | 
|  | * the case). | 
|  | * | 
|  | * Firmware with HTT older than 3.0 delivers incorrect tx status for | 
|  | * NullFunc frames to driver. However there's a HTT Mgmt Tx command | 
|  | * which seems to deliver correct tx reports for NullFunc frames. The | 
|  | * downside of using it is it ignores client powersave state so it can | 
|  | * end up disconnecting sleeping clients in AP mode. It should fix STA | 
|  | * mode though because AP don't sleep. | 
|  | */ | 
|  | if (ar->htt.target_version_major < 3 && | 
|  | (ieee80211_is_nullfunc(fc) || ieee80211_is_qos_nullfunc(fc)) && | 
|  | !test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX, | 
|  | ar->running_fw->fw_file.fw_features)) | 
|  | return ATH10K_HW_TXRX_MGMT; | 
|  |  | 
|  | /* Workaround: | 
|  | * | 
|  | * Some wmi-tlv firmwares for qca6174 have broken Tx key selection for | 
|  | * NativeWifi txmode - it selects AP key instead of peer key. It seems | 
|  | * to work with Ethernet txmode so use it. | 
|  | * | 
|  | * FIXME: Check if raw mode works with TDLS. | 
|  | */ | 
|  | if (ieee80211_is_data_present(fc) && sta && sta->tdls) | 
|  | return ATH10K_HW_TXRX_ETHERNET; | 
|  |  | 
|  | if (test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags) || | 
|  | skb_cb->flags & ATH10K_SKB_F_RAW_TX) | 
|  | return ATH10K_HW_TXRX_RAW; | 
|  |  | 
|  | return ATH10K_HW_TXRX_NATIVE_WIFI; | 
|  | } | 
|  |  | 
|  | static bool ath10k_tx_h_use_hwcrypto(struct ieee80211_vif *vif, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | const struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | const struct ieee80211_hdr *hdr = (void *)skb->data; | 
|  | const u32 mask = IEEE80211_TX_INTFL_DONT_ENCRYPT | | 
|  | IEEE80211_TX_CTL_INJECTED; | 
|  |  | 
|  | if (!ieee80211_has_protected(hdr->frame_control)) | 
|  | return false; | 
|  |  | 
|  | if ((info->flags & mask) == mask) | 
|  | return false; | 
|  |  | 
|  | if (vif) | 
|  | return !((struct ath10k_vif *)vif->drv_priv)->nohwcrypt; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | /* HTT Tx uses Native Wifi tx mode which expects 802.11 frames without QoS | 
|  | * Control in the header. | 
|  | */ | 
|  | static void ath10k_tx_h_nwifi(struct ieee80211_hw *hw, struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (void *)skb->data; | 
|  | struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb); | 
|  | u8 *qos_ctl; | 
|  |  | 
|  | if (!ieee80211_is_data_qos(hdr->frame_control)) | 
|  | return; | 
|  |  | 
|  | qos_ctl = ieee80211_get_qos_ctl(hdr); | 
|  | memmove(skb->data + IEEE80211_QOS_CTL_LEN, | 
|  | skb->data, (void *)qos_ctl - (void *)skb->data); | 
|  | skb_pull(skb, IEEE80211_QOS_CTL_LEN); | 
|  |  | 
|  | /* Some firmware revisions don't handle sending QoS NullFunc well. | 
|  | * These frames are mainly used for CQM purposes so it doesn't really | 
|  | * matter whether QoS NullFunc or NullFunc are sent. | 
|  | */ | 
|  | hdr = (void *)skb->data; | 
|  | if (ieee80211_is_qos_nullfunc(hdr->frame_control)) | 
|  | cb->flags &= ~ATH10K_SKB_F_QOS; | 
|  |  | 
|  | hdr->frame_control &= ~__cpu_to_le16(IEEE80211_STYPE_QOS_DATA); | 
|  | } | 
|  |  | 
|  | static void ath10k_tx_h_8023(struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct rfc1042_hdr *rfc1042; | 
|  | struct ethhdr *eth; | 
|  | size_t hdrlen; | 
|  | u8 da[ETH_ALEN]; | 
|  | u8 sa[ETH_ALEN]; | 
|  | __be16 type; | 
|  |  | 
|  | hdr = (void *)skb->data; | 
|  | hdrlen = ieee80211_hdrlen(hdr->frame_control); | 
|  | rfc1042 = (void *)skb->data + hdrlen; | 
|  |  | 
|  | ether_addr_copy(da, ieee80211_get_DA(hdr)); | 
|  | ether_addr_copy(sa, ieee80211_get_SA(hdr)); | 
|  | type = rfc1042->snap_type; | 
|  |  | 
|  | skb_pull(skb, hdrlen + sizeof(*rfc1042)); | 
|  | skb_push(skb, sizeof(*eth)); | 
|  |  | 
|  | eth = (void *)skb->data; | 
|  | ether_addr_copy(eth->h_dest, da); | 
|  | ether_addr_copy(eth->h_source, sa); | 
|  | eth->h_proto = type; | 
|  | } | 
|  |  | 
|  | static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  |  | 
|  | /* This is case only for P2P_GO */ | 
|  | if (vif->type != NL80211_IFTYPE_AP || !vif->p2p) | 
|  | return; | 
|  |  | 
|  | if (unlikely(ieee80211_is_probe_resp(hdr->frame_control))) { | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | if (arvif->u.ap.noa_data) | 
|  | if (!pskb_expand_head(skb, 0, arvif->u.ap.noa_len, | 
|  | GFP_ATOMIC)) | 
|  | skb_put_data(skb, arvif->u.ap.noa_data, | 
|  | arvif->u.ap.noa_len); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_tx_h_fill_cb(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_txq *txq, | 
|  | struct sk_buff *skb, u16 airtime) | 
|  | { | 
|  | struct ieee80211_hdr *hdr = (void *)skb->data; | 
|  | struct ath10k_skb_cb *cb = ATH10K_SKB_CB(skb); | 
|  | const struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | bool is_data = ieee80211_is_data(hdr->frame_control) || | 
|  | ieee80211_is_data_qos(hdr->frame_control); | 
|  |  | 
|  | cb->flags = 0; | 
|  | if (!ath10k_tx_h_use_hwcrypto(vif, skb)) | 
|  | cb->flags |= ATH10K_SKB_F_NO_HWCRYPT; | 
|  |  | 
|  | if (ieee80211_is_mgmt(hdr->frame_control)) | 
|  | cb->flags |= ATH10K_SKB_F_MGMT; | 
|  |  | 
|  | if (ieee80211_is_data_qos(hdr->frame_control)) | 
|  | cb->flags |= ATH10K_SKB_F_QOS; | 
|  |  | 
|  | /* Data frames encrypted in software will be posted to firmware | 
|  | * with tx encap mode set to RAW. Ex: Multicast traffic generated | 
|  | * for a specific VLAN group will always be encrypted in software. | 
|  | */ | 
|  | if (is_data && ieee80211_has_protected(hdr->frame_control) && | 
|  | !info->control.hw_key) { | 
|  | cb->flags |= ATH10K_SKB_F_NO_HWCRYPT; | 
|  | cb->flags |= ATH10K_SKB_F_RAW_TX; | 
|  | } | 
|  |  | 
|  | cb->vif = vif; | 
|  | cb->txq = txq; | 
|  | cb->airtime_est = airtime; | 
|  | } | 
|  |  | 
|  | bool ath10k_mac_tx_frm_has_freq(struct ath10k *ar) | 
|  | { | 
|  | /* FIXME: Not really sure since when the behaviour changed. At some | 
|  | * point new firmware stopped requiring creation of peer entries for | 
|  | * offchannel tx (and actually creating them causes issues with wmi-htc | 
|  | * tx credit replenishment and reliability). Assuming it's at least 3.4 | 
|  | * because that's when the `freq` was introduced to TX_FRM HTT command. | 
|  | */ | 
|  | return (ar->htt.target_version_major >= 3 && | 
|  | ar->htt.target_version_minor >= 4 && | 
|  | ar->running_fw->fw_file.htt_op_version == ATH10K_FW_HTT_OP_VERSION_TLV); | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_tx_wmi_mgmt(struct ath10k *ar, struct sk_buff *skb) | 
|  | { | 
|  | struct sk_buff_head *q = &ar->wmi_mgmt_tx_queue; | 
|  | int ret = 0; | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  |  | 
|  | if (skb_queue_len(q) == ATH10K_MAX_NUM_MGMT_PENDING) { | 
|  | ath10k_warn(ar, "wmi mgmt tx queue is full\n"); | 
|  | ret = -ENOSPC; | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | __skb_queue_tail(q, skb); | 
|  | ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work); | 
|  |  | 
|  | unlock: | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static enum ath10k_mac_tx_path | 
|  | ath10k_mac_tx_h_get_txpath(struct ath10k *ar, | 
|  | struct sk_buff *skb, | 
|  | enum ath10k_hw_txrx_mode txmode) | 
|  | { | 
|  | switch (txmode) { | 
|  | case ATH10K_HW_TXRX_RAW: | 
|  | case ATH10K_HW_TXRX_NATIVE_WIFI: | 
|  | case ATH10K_HW_TXRX_ETHERNET: | 
|  | return ATH10K_MAC_TX_HTT; | 
|  | case ATH10K_HW_TXRX_MGMT: | 
|  | if (test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX, | 
|  | ar->running_fw->fw_file.fw_features) || | 
|  | test_bit(WMI_SERVICE_MGMT_TX_WMI, | 
|  | ar->wmi.svc_map)) | 
|  | return ATH10K_MAC_TX_WMI_MGMT; | 
|  | else if (ar->htt.target_version_major >= 3) | 
|  | return ATH10K_MAC_TX_HTT; | 
|  | else | 
|  | return ATH10K_MAC_TX_HTT_MGMT; | 
|  | } | 
|  |  | 
|  | return ATH10K_MAC_TX_UNKNOWN; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_tx_submit(struct ath10k *ar, | 
|  | enum ath10k_hw_txrx_mode txmode, | 
|  | enum ath10k_mac_tx_path txpath, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ath10k_htt *htt = &ar->htt; | 
|  | int ret = -EINVAL; | 
|  |  | 
|  | switch (txpath) { | 
|  | case ATH10K_MAC_TX_HTT: | 
|  | ret = ath10k_htt_tx(htt, txmode, skb); | 
|  | break; | 
|  | case ATH10K_MAC_TX_HTT_MGMT: | 
|  | ret = ath10k_htt_mgmt_tx(htt, skb); | 
|  | break; | 
|  | case ATH10K_MAC_TX_WMI_MGMT: | 
|  | ret = ath10k_mac_tx_wmi_mgmt(ar, skb); | 
|  | break; | 
|  | case ATH10K_MAC_TX_UNKNOWN: | 
|  | WARN_ON_ONCE(1); | 
|  | ret = -EINVAL; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to transmit packet, dropping: %d\n", | 
|  | ret); | 
|  | ieee80211_free_txskb(ar->hw, skb); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* This function consumes the sk_buff regardless of return value as far as | 
|  | * caller is concerned so no freeing is necessary afterwards. | 
|  | */ | 
|  | static int ath10k_mac_tx(struct ath10k *ar, | 
|  | struct ieee80211_vif *vif, | 
|  | enum ath10k_hw_txrx_mode txmode, | 
|  | enum ath10k_mac_tx_path txpath, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ieee80211_hw *hw = ar->hw; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | const struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb); | 
|  | int ret; | 
|  |  | 
|  | /* We should disable CCK RATE due to P2P */ | 
|  | if (info->flags & IEEE80211_TX_CTL_NO_CCK_RATE) | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "IEEE80211_TX_CTL_NO_CCK_RATE\n"); | 
|  |  | 
|  | switch (txmode) { | 
|  | case ATH10K_HW_TXRX_MGMT: | 
|  | case ATH10K_HW_TXRX_NATIVE_WIFI: | 
|  | ath10k_tx_h_nwifi(hw, skb); | 
|  | ath10k_tx_h_add_p2p_noa_ie(ar, vif, skb); | 
|  | ath10k_tx_h_seq_no(vif, skb); | 
|  | break; | 
|  | case ATH10K_HW_TXRX_ETHERNET: | 
|  | ath10k_tx_h_8023(skb); | 
|  | break; | 
|  | case ATH10K_HW_TXRX_RAW: | 
|  | if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags) && | 
|  | !(skb_cb->flags & ATH10K_SKB_F_RAW_TX)) { | 
|  | WARN_ON_ONCE(1); | 
|  | ieee80211_free_txskb(hw, skb); | 
|  | return -ENOTSUPP; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) { | 
|  | if (!ath10k_mac_tx_frm_has_freq(ar)) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "queued offchannel skb %pK\n", | 
|  | skb); | 
|  |  | 
|  | skb_queue_tail(&ar->offchan_tx_queue, skb); | 
|  | ieee80211_queue_work(hw, &ar->offchan_tx_work); | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = ath10k_mac_tx_submit(ar, txmode, txpath, skb); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to submit frame: %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void ath10k_offchan_tx_purge(struct ath10k *ar) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | for (;;) { | 
|  | skb = skb_dequeue(&ar->offchan_tx_queue); | 
|  | if (!skb) | 
|  | break; | 
|  |  | 
|  | ieee80211_free_txskb(ar->hw, skb); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ath10k_offchan_tx_work(struct work_struct *work) | 
|  | { | 
|  | struct ath10k *ar = container_of(work, struct ath10k, offchan_tx_work); | 
|  | struct ath10k_peer *peer; | 
|  | struct ath10k_vif *arvif; | 
|  | enum ath10k_hw_txrx_mode txmode; | 
|  | enum ath10k_mac_tx_path txpath; | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct ieee80211_vif *vif; | 
|  | struct ieee80211_sta *sta; | 
|  | struct sk_buff *skb; | 
|  | const u8 *peer_addr; | 
|  | int vdev_id; | 
|  | int ret; | 
|  | unsigned long time_left; | 
|  | bool tmp_peer_created = false; | 
|  |  | 
|  | /* FW requirement: We must create a peer before FW will send out | 
|  | * an offchannel frame. Otherwise the frame will be stuck and | 
|  | * never transmitted. We delete the peer upon tx completion. | 
|  | * It is unlikely that a peer for offchannel tx will already be | 
|  | * present. However it may be in some rare cases so account for that. | 
|  | * Otherwise we might remove a legitimate peer and break stuff. | 
|  | */ | 
|  |  | 
|  | for (;;) { | 
|  | skb = skb_dequeue(&ar->offchan_tx_queue); | 
|  | if (!skb) | 
|  | break; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac offchannel skb %pK\n", | 
|  | skb); | 
|  |  | 
|  | hdr = (struct ieee80211_hdr *)skb->data; | 
|  | peer_addr = ieee80211_get_DA(hdr); | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | vdev_id = ar->scan.vdev_id; | 
|  | peer = ath10k_peer_find(ar, vdev_id, peer_addr); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | if (peer) | 
|  | /* FIXME: should this use ath10k_warn()? */ | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n", | 
|  | peer_addr, vdev_id); | 
|  |  | 
|  | if (!peer) { | 
|  | ret = ath10k_peer_create(ar, NULL, NULL, vdev_id, | 
|  | peer_addr, | 
|  | WMI_PEER_TYPE_DEFAULT); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to create peer %pM on vdev %d: %d\n", | 
|  | peer_addr, vdev_id, ret); | 
|  | tmp_peer_created = (ret == 0); | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | reinit_completion(&ar->offchan_tx_completed); | 
|  | ar->offchan_tx_skb = skb; | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | /* It's safe to access vif and sta - conf_mutex guarantees that | 
|  | * sta_state() and remove_interface() are locked exclusively | 
|  | * out wrt to this offchannel worker. | 
|  | */ | 
|  | arvif = ath10k_get_arvif(ar, vdev_id); | 
|  | if (arvif) { | 
|  | vif = arvif->vif; | 
|  | sta = ieee80211_find_sta(vif, peer_addr); | 
|  | } else { | 
|  | vif = NULL; | 
|  | sta = NULL; | 
|  | } | 
|  |  | 
|  | txmode = ath10k_mac_tx_h_get_txmode(ar, vif, sta, skb); | 
|  | txpath = ath10k_mac_tx_h_get_txpath(ar, skb, txmode); | 
|  |  | 
|  | ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to transmit offchannel frame: %d\n", | 
|  | ret); | 
|  | /* not serious */ | 
|  | } | 
|  |  | 
|  | time_left = | 
|  | wait_for_completion_timeout(&ar->offchan_tx_completed, 3 * HZ); | 
|  | if (time_left == 0) | 
|  | ath10k_warn(ar, "timed out waiting for offchannel skb %pK\n", | 
|  | skb); | 
|  |  | 
|  | if (!peer && tmp_peer_created) { | 
|  | ret = ath10k_peer_delete(ar, vdev_id, peer_addr); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to delete peer %pM on vdev %d: %d\n", | 
|  | peer_addr, vdev_id, ret); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ath10k_mgmt_over_wmi_tx_purge(struct ath10k *ar) | 
|  | { | 
|  | struct sk_buff *skb; | 
|  |  | 
|  | for (;;) { | 
|  | skb = skb_dequeue(&ar->wmi_mgmt_tx_queue); | 
|  | if (!skb) | 
|  | break; | 
|  |  | 
|  | ieee80211_free_txskb(ar->hw, skb); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work) | 
|  | { | 
|  | struct ath10k *ar = container_of(work, struct ath10k, wmi_mgmt_tx_work); | 
|  | struct sk_buff *skb; | 
|  | dma_addr_t paddr; | 
|  | int ret; | 
|  |  | 
|  | for (;;) { | 
|  | skb = skb_dequeue(&ar->wmi_mgmt_tx_queue); | 
|  | if (!skb) | 
|  | break; | 
|  |  | 
|  | if (test_bit(ATH10K_FW_FEATURE_MGMT_TX_BY_REF, | 
|  | ar->running_fw->fw_file.fw_features)) { | 
|  | paddr = dma_map_single(ar->dev, skb->data, | 
|  | skb->len, DMA_TO_DEVICE); | 
|  | if (!paddr) | 
|  | continue; | 
|  | ret = ath10k_wmi_mgmt_tx_send(ar, skb, paddr); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to transmit management frame by ref via WMI: %d\n", | 
|  | ret); | 
|  | dma_unmap_single(ar->dev, paddr, skb->len, | 
|  | DMA_TO_DEVICE); | 
|  | ieee80211_free_txskb(ar->hw, skb); | 
|  | } | 
|  | } else { | 
|  | ret = ath10k_wmi_mgmt_tx(ar, skb); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to transmit management frame via WMI: %d\n", | 
|  | ret); | 
|  | ieee80211_free_txskb(ar->hw, skb); | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_txq_init(struct ieee80211_txq *txq) | 
|  | { | 
|  | struct ath10k_txq *artxq; | 
|  |  | 
|  | if (!txq) | 
|  | return; | 
|  |  | 
|  | artxq = (void *)txq->drv_priv; | 
|  | INIT_LIST_HEAD(&artxq->list); | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_txq_unref(struct ath10k *ar, struct ieee80211_txq *txq) | 
|  | { | 
|  | struct ath10k_skb_cb *cb; | 
|  | struct sk_buff *msdu; | 
|  | int msdu_id; | 
|  |  | 
|  | if (!txq) | 
|  | return; | 
|  |  | 
|  | spin_lock_bh(&ar->htt.tx_lock); | 
|  | idr_for_each_entry(&ar->htt.pending_tx, msdu, msdu_id) { | 
|  | cb = ATH10K_SKB_CB(msdu); | 
|  | if (cb->txq == txq) | 
|  | cb->txq = NULL; | 
|  | } | 
|  | spin_unlock_bh(&ar->htt.tx_lock); | 
|  | } | 
|  |  | 
|  | struct ieee80211_txq *ath10k_mac_txq_lookup(struct ath10k *ar, | 
|  | u16 peer_id, | 
|  | u8 tid) | 
|  | { | 
|  | struct ath10k_peer *peer; | 
|  |  | 
|  | lockdep_assert_held(&ar->data_lock); | 
|  |  | 
|  | peer = ar->peer_map[peer_id]; | 
|  | if (!peer) | 
|  | return NULL; | 
|  |  | 
|  | if (peer->removed) | 
|  | return NULL; | 
|  |  | 
|  | if (peer->sta) | 
|  | return peer->sta->txq[tid]; | 
|  | else if (peer->vif) | 
|  | return peer->vif->txq; | 
|  | else | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static bool ath10k_mac_tx_can_push(struct ieee80211_hw *hw, | 
|  | struct ieee80211_txq *txq) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_txq *artxq = (void *)txq->drv_priv; | 
|  |  | 
|  | /* No need to get locks */ | 
|  | if (ar->htt.tx_q_state.mode == HTT_TX_MODE_SWITCH_PUSH) | 
|  | return true; | 
|  |  | 
|  | if (ar->htt.num_pending_tx < ar->htt.tx_q_state.num_push_allowed) | 
|  | return true; | 
|  |  | 
|  | if (artxq->num_fw_queued < artxq->num_push_allowed) | 
|  | return true; | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | /* Return estimated airtime in microsecond, which is calculated using last | 
|  | * reported TX rate. This is just a rough estimation because host driver has no | 
|  | * knowledge of the actual transmit rate, retries or aggregation. If actual | 
|  | * airtime can be reported by firmware, then delta between estimated and actual | 
|  | * airtime can be adjusted from deficit. | 
|  | */ | 
|  | #define IEEE80211_ATF_OVERHEAD		100	/* IFS + some slot time */ | 
|  | #define IEEE80211_ATF_OVERHEAD_IFS	16	/* IFS only */ | 
|  | static u16 ath10k_mac_update_airtime(struct ath10k *ar, | 
|  | struct ieee80211_txq *txq, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ath10k_sta *arsta; | 
|  | u32 pktlen; | 
|  | u16 airtime = 0; | 
|  |  | 
|  | if (!txq || !txq->sta) | 
|  | return airtime; | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_REPORT_AIRTIME, ar->wmi.svc_map)) | 
|  | return airtime; | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | arsta = (struct ath10k_sta *)txq->sta->drv_priv; | 
|  |  | 
|  | pktlen = skb->len + 38; /* Assume MAC header 30, SNAP 8 for most case */ | 
|  | if (arsta->last_tx_bitrate) { | 
|  | /* airtime in us, last_tx_bitrate in 100kbps */ | 
|  | airtime = (pktlen * 8 * (1000 / 100)) | 
|  | / arsta->last_tx_bitrate; | 
|  | /* overhead for media access time and IFS */ | 
|  | airtime += IEEE80211_ATF_OVERHEAD_IFS; | 
|  | } else { | 
|  | /* This is mostly for throttle excessive BC/MC frames, and the | 
|  | * airtime/rate doesn't need be exact. Airtime of BC/MC frames | 
|  | * in 2G get some discount, which helps prevent very low rate | 
|  | * frames from being blocked for too long. | 
|  | */ | 
|  | airtime = (pktlen * 8 * (1000 / 100)) / 60; /* 6M */ | 
|  | airtime += IEEE80211_ATF_OVERHEAD; | 
|  | } | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | return airtime; | 
|  | } | 
|  |  | 
|  | int ath10k_mac_tx_push_txq(struct ieee80211_hw *hw, | 
|  | struct ieee80211_txq *txq) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_htt *htt = &ar->htt; | 
|  | struct ath10k_txq *artxq = (void *)txq->drv_priv; | 
|  | struct ieee80211_vif *vif = txq->vif; | 
|  | struct ieee80211_sta *sta = txq->sta; | 
|  | enum ath10k_hw_txrx_mode txmode; | 
|  | enum ath10k_mac_tx_path txpath; | 
|  | struct sk_buff *skb; | 
|  | struct ieee80211_hdr *hdr; | 
|  | size_t skb_len; | 
|  | bool is_mgmt, is_presp; | 
|  | int ret; | 
|  | u16 airtime; | 
|  |  | 
|  | spin_lock_bh(&ar->htt.tx_lock); | 
|  | ret = ath10k_htt_tx_inc_pending(htt); | 
|  | spin_unlock_bh(&ar->htt.tx_lock); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | skb = ieee80211_tx_dequeue(hw, txq); | 
|  | if (!skb) { | 
|  | spin_lock_bh(&ar->htt.tx_lock); | 
|  | ath10k_htt_tx_dec_pending(htt); | 
|  | spin_unlock_bh(&ar->htt.tx_lock); | 
|  |  | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | airtime = ath10k_mac_update_airtime(ar, txq, skb); | 
|  | ath10k_mac_tx_h_fill_cb(ar, vif, txq, skb, airtime); | 
|  |  | 
|  | skb_len = skb->len; | 
|  | txmode = ath10k_mac_tx_h_get_txmode(ar, vif, sta, skb); | 
|  | txpath = ath10k_mac_tx_h_get_txpath(ar, skb, txmode); | 
|  | is_mgmt = (txpath == ATH10K_MAC_TX_HTT_MGMT); | 
|  |  | 
|  | if (is_mgmt) { | 
|  | hdr = (struct ieee80211_hdr *)skb->data; | 
|  | is_presp = ieee80211_is_probe_resp(hdr->frame_control); | 
|  |  | 
|  | spin_lock_bh(&ar->htt.tx_lock); | 
|  | ret = ath10k_htt_tx_mgmt_inc_pending(htt, is_mgmt, is_presp); | 
|  |  | 
|  | if (ret) { | 
|  | ath10k_htt_tx_dec_pending(htt); | 
|  | spin_unlock_bh(&ar->htt.tx_lock); | 
|  | return ret; | 
|  | } | 
|  | spin_unlock_bh(&ar->htt.tx_lock); | 
|  | } | 
|  |  | 
|  | ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb); | 
|  | if (unlikely(ret)) { | 
|  | ath10k_warn(ar, "failed to push frame: %d\n", ret); | 
|  |  | 
|  | spin_lock_bh(&ar->htt.tx_lock); | 
|  | ath10k_htt_tx_dec_pending(htt); | 
|  | if (is_mgmt) | 
|  | ath10k_htt_tx_mgmt_dec_pending(htt); | 
|  | spin_unlock_bh(&ar->htt.tx_lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&ar->htt.tx_lock); | 
|  | artxq->num_fw_queued++; | 
|  | spin_unlock_bh(&ar->htt.tx_lock); | 
|  |  | 
|  | return skb_len; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_schedule_txq(struct ieee80211_hw *hw, u32 ac) | 
|  | { | 
|  | struct ieee80211_txq *txq; | 
|  | int ret = 0; | 
|  |  | 
|  | ieee80211_txq_schedule_start(hw, ac); | 
|  | while ((txq = ieee80211_next_txq(hw, ac))) { | 
|  | while (ath10k_mac_tx_can_push(hw, txq)) { | 
|  | ret = ath10k_mac_tx_push_txq(hw, txq); | 
|  | if (ret < 0) | 
|  | break; | 
|  | } | 
|  | ieee80211_return_txq(hw, txq, false); | 
|  | ath10k_htt_tx_txq_update(hw, txq); | 
|  | if (ret == -EBUSY) | 
|  | break; | 
|  | } | 
|  | ieee80211_txq_schedule_end(hw, ac); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void ath10k_mac_tx_push_pending(struct ath10k *ar) | 
|  | { | 
|  | struct ieee80211_hw *hw = ar->hw; | 
|  | u32 ac; | 
|  |  | 
|  | if (ar->htt.tx_q_state.mode != HTT_TX_MODE_SWITCH_PUSH) | 
|  | return; | 
|  |  | 
|  | if (ar->htt.num_pending_tx >= (ar->htt.max_num_pending_tx / 2)) | 
|  | return; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | 
|  | if (ath10k_mac_schedule_txq(hw, ac) == -EBUSY) | 
|  | break; | 
|  | } | 
|  | rcu_read_unlock(); | 
|  | } | 
|  | EXPORT_SYMBOL(ath10k_mac_tx_push_pending); | 
|  |  | 
|  | /************/ | 
|  | /* Scanning */ | 
|  | /************/ | 
|  |  | 
|  | void __ath10k_scan_finish(struct ath10k *ar) | 
|  | { | 
|  | lockdep_assert_held(&ar->data_lock); | 
|  |  | 
|  | switch (ar->scan.state) { | 
|  | case ATH10K_SCAN_IDLE: | 
|  | break; | 
|  | case ATH10K_SCAN_RUNNING: | 
|  | case ATH10K_SCAN_ABORTING: | 
|  | if (!ar->scan.is_roc) { | 
|  | struct cfg80211_scan_info info = { | 
|  | .aborted = (ar->scan.state == | 
|  | ATH10K_SCAN_ABORTING), | 
|  | }; | 
|  |  | 
|  | ieee80211_scan_completed(ar->hw, &info); | 
|  | } else if (ar->scan.roc_notify) { | 
|  | ieee80211_remain_on_channel_expired(ar->hw); | 
|  | } | 
|  | /* fall through */ | 
|  | case ATH10K_SCAN_STARTING: | 
|  | ar->scan.state = ATH10K_SCAN_IDLE; | 
|  | ar->scan_channel = NULL; | 
|  | ar->scan.roc_freq = 0; | 
|  | ath10k_offchan_tx_purge(ar); | 
|  | cancel_delayed_work(&ar->scan.timeout); | 
|  | complete(&ar->scan.completed); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | void ath10k_scan_finish(struct ath10k *ar) | 
|  | { | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | __ath10k_scan_finish(ar); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  | } | 
|  |  | 
|  | static int ath10k_scan_stop(struct ath10k *ar) | 
|  | { | 
|  | struct wmi_stop_scan_arg arg = { | 
|  | .req_id = 1, /* FIXME */ | 
|  | .req_type = WMI_SCAN_STOP_ONE, | 
|  | .u.scan_id = ATH10K_SCAN_ID, | 
|  | }; | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | ret = ath10k_wmi_stop_scan(ar, &arg); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to stop wmi scan: %d\n", ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ret = wait_for_completion_timeout(&ar->scan.completed, 3 * HZ); | 
|  | if (ret == 0) { | 
|  | ath10k_warn(ar, "failed to receive scan abortion completion: timed out\n"); | 
|  | ret = -ETIMEDOUT; | 
|  | } else if (ret > 0) { | 
|  | ret = 0; | 
|  | } | 
|  |  | 
|  | out: | 
|  | /* Scan state should be updated upon scan completion but in case | 
|  | * firmware fails to deliver the event (for whatever reason) it is | 
|  | * desired to clean up scan state anyway. Firmware may have just | 
|  | * dropped the scan completion event delivery due to transport pipe | 
|  | * being overflown with data and/or it can recover on its own before | 
|  | * next scan request is submitted. | 
|  | */ | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | if (ar->scan.state != ATH10K_SCAN_IDLE) | 
|  | __ath10k_scan_finish(ar); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void ath10k_scan_abort(struct ath10k *ar) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  |  | 
|  | switch (ar->scan.state) { | 
|  | case ATH10K_SCAN_IDLE: | 
|  | /* This can happen if timeout worker kicked in and called | 
|  | * abortion while scan completion was being processed. | 
|  | */ | 
|  | break; | 
|  | case ATH10K_SCAN_STARTING: | 
|  | case ATH10K_SCAN_ABORTING: | 
|  | ath10k_warn(ar, "refusing scan abortion due to invalid scan state: %s (%d)\n", | 
|  | ath10k_scan_state_str(ar->scan.state), | 
|  | ar->scan.state); | 
|  | break; | 
|  | case ATH10K_SCAN_RUNNING: | 
|  | ar->scan.state = ATH10K_SCAN_ABORTING; | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | ret = ath10k_scan_stop(ar); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to abort scan: %d\n", ret); | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | break; | 
|  | } | 
|  |  | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  | } | 
|  |  | 
|  | void ath10k_scan_timeout_work(struct work_struct *work) | 
|  | { | 
|  | struct ath10k *ar = container_of(work, struct ath10k, | 
|  | scan.timeout.work); | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  | ath10k_scan_abort(ar); | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | } | 
|  |  | 
|  | static int ath10k_start_scan(struct ath10k *ar, | 
|  | const struct wmi_start_scan_arg *arg) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | ret = ath10k_wmi_start_scan(ar, arg); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = wait_for_completion_timeout(&ar->scan.started, 1 * HZ); | 
|  | if (ret == 0) { | 
|  | ret = ath10k_scan_stop(ar); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to stop scan: %d\n", ret); | 
|  |  | 
|  | return -ETIMEDOUT; | 
|  | } | 
|  |  | 
|  | /* If we failed to start the scan, return error code at | 
|  | * this point.  This is probably due to some issue in the | 
|  | * firmware, but no need to wedge the driver due to that... | 
|  | */ | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | if (ar->scan.state == ATH10K_SCAN_IDLE) { | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  | return -EINVAL; | 
|  | } | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /**********************/ | 
|  | /* mac80211 callbacks */ | 
|  | /**********************/ | 
|  |  | 
|  | static void ath10k_mac_op_tx(struct ieee80211_hw *hw, | 
|  | struct ieee80211_tx_control *control, | 
|  | struct sk_buff *skb) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_htt *htt = &ar->htt; | 
|  | struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | 
|  | struct ieee80211_vif *vif = info->control.vif; | 
|  | struct ieee80211_sta *sta = control->sta; | 
|  | struct ieee80211_txq *txq = NULL; | 
|  | struct ieee80211_hdr *hdr = (void *)skb->data; | 
|  | enum ath10k_hw_txrx_mode txmode; | 
|  | enum ath10k_mac_tx_path txpath; | 
|  | bool is_htt; | 
|  | bool is_mgmt; | 
|  | bool is_presp; | 
|  | int ret; | 
|  | u16 airtime; | 
|  |  | 
|  | airtime = ath10k_mac_update_airtime(ar, txq, skb); | 
|  | ath10k_mac_tx_h_fill_cb(ar, vif, txq, skb, airtime); | 
|  |  | 
|  | txmode = ath10k_mac_tx_h_get_txmode(ar, vif, sta, skb); | 
|  | txpath = ath10k_mac_tx_h_get_txpath(ar, skb, txmode); | 
|  | is_htt = (txpath == ATH10K_MAC_TX_HTT || | 
|  | txpath == ATH10K_MAC_TX_HTT_MGMT); | 
|  | is_mgmt = (txpath == ATH10K_MAC_TX_HTT_MGMT); | 
|  |  | 
|  | if (is_htt) { | 
|  | spin_lock_bh(&ar->htt.tx_lock); | 
|  | is_presp = ieee80211_is_probe_resp(hdr->frame_control); | 
|  |  | 
|  | ret = ath10k_htt_tx_inc_pending(htt); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to increase tx pending count: %d, dropping\n", | 
|  | ret); | 
|  | spin_unlock_bh(&ar->htt.tx_lock); | 
|  | ieee80211_free_txskb(ar->hw, skb); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ret = ath10k_htt_tx_mgmt_inc_pending(htt, is_mgmt, is_presp); | 
|  | if (ret) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "failed to increase tx mgmt pending count: %d, dropping\n", | 
|  | ret); | 
|  | ath10k_htt_tx_dec_pending(htt); | 
|  | spin_unlock_bh(&ar->htt.tx_lock); | 
|  | ieee80211_free_txskb(ar->hw, skb); | 
|  | return; | 
|  | } | 
|  | spin_unlock_bh(&ar->htt.tx_lock); | 
|  | } | 
|  |  | 
|  | ret = ath10k_mac_tx(ar, vif, txmode, txpath, skb); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to transmit frame: %d\n", ret); | 
|  | if (is_htt) { | 
|  | spin_lock_bh(&ar->htt.tx_lock); | 
|  | ath10k_htt_tx_dec_pending(htt); | 
|  | if (is_mgmt) | 
|  | ath10k_htt_tx_mgmt_dec_pending(htt); | 
|  | spin_unlock_bh(&ar->htt.tx_lock); | 
|  | } | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_op_wake_tx_queue(struct ieee80211_hw *hw, | 
|  | struct ieee80211_txq *txq) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | int ret; | 
|  | u8 ac; | 
|  |  | 
|  | ath10k_htt_tx_txq_update(hw, txq); | 
|  | if (ar->htt.tx_q_state.mode != HTT_TX_MODE_SWITCH_PUSH) | 
|  | return; | 
|  |  | 
|  | ac = txq->ac; | 
|  | ieee80211_txq_schedule_start(hw, ac); | 
|  | txq = ieee80211_next_txq(hw, ac); | 
|  | if (!txq) | 
|  | goto out; | 
|  |  | 
|  | while (ath10k_mac_tx_can_push(hw, txq)) { | 
|  | ret = ath10k_mac_tx_push_txq(hw, txq); | 
|  | if (ret < 0) | 
|  | break; | 
|  | } | 
|  | ieee80211_return_txq(hw, txq, false); | 
|  | ath10k_htt_tx_txq_update(hw, txq); | 
|  | out: | 
|  | ieee80211_txq_schedule_end(hw, ac); | 
|  | } | 
|  |  | 
|  | /* Must not be called with conf_mutex held as workers can use that also. */ | 
|  | void ath10k_drain_tx(struct ath10k *ar) | 
|  | { | 
|  | /* make sure rcu-protected mac80211 tx path itself is drained */ | 
|  | synchronize_net(); | 
|  |  | 
|  | ath10k_offchan_tx_purge(ar); | 
|  | ath10k_mgmt_over_wmi_tx_purge(ar); | 
|  |  | 
|  | cancel_work_sync(&ar->offchan_tx_work); | 
|  | cancel_work_sync(&ar->wmi_mgmt_tx_work); | 
|  | } | 
|  |  | 
|  | void ath10k_halt(struct ath10k *ar) | 
|  | { | 
|  | struct ath10k_vif *arvif; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | clear_bit(ATH10K_CAC_RUNNING, &ar->dev_flags); | 
|  | ar->filter_flags = 0; | 
|  | ar->monitor = false; | 
|  | ar->monitor_arvif = NULL; | 
|  |  | 
|  | if (ar->monitor_started) | 
|  | ath10k_monitor_stop(ar); | 
|  |  | 
|  | ar->monitor_started = false; | 
|  | ar->tx_paused = 0; | 
|  |  | 
|  | ath10k_scan_finish(ar); | 
|  | ath10k_peer_cleanup_all(ar); | 
|  | ath10k_stop_radar_confirmation(ar); | 
|  | ath10k_core_stop(ar); | 
|  | ath10k_hif_power_down(ar); | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | list_for_each_entry(arvif, &ar->arvifs, list) | 
|  | ath10k_mac_vif_beacon_cleanup(arvif); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  | } | 
|  |  | 
|  | static int ath10k_get_antenna(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | *tx_ant = ar->cfg_tx_chainmask; | 
|  | *rx_ant = ar->cfg_rx_chainmask; | 
|  |  | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ath10k_check_chain_mask(struct ath10k *ar, u32 cm, const char *dbg) | 
|  | { | 
|  | /* It is not clear that allowing gaps in chainmask | 
|  | * is helpful.  Probably it will not do what user | 
|  | * is hoping for, so warn in that case. | 
|  | */ | 
|  | if (cm == 15 || cm == 7 || cm == 3 || cm == 1 || cm == 0) | 
|  | return; | 
|  |  | 
|  | ath10k_warn(ar, "mac %s antenna chainmask may be invalid: 0x%x.  Suggested values: 15, 7, 3, 1 or 0.\n", | 
|  | dbg, cm); | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_get_vht_cap_bf_sts(struct ath10k *ar) | 
|  | { | 
|  | int nsts = ar->vht_cap_info; | 
|  |  | 
|  | nsts &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK; | 
|  | nsts >>= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT; | 
|  |  | 
|  | /* If firmware does not deliver to host number of space-time | 
|  | * streams supported, assume it support up to 4 BF STS and return | 
|  | * the value for VHT CAP: nsts-1) | 
|  | */ | 
|  | if (nsts == 0) | 
|  | return 3; | 
|  |  | 
|  | return nsts; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_get_vht_cap_bf_sound_dim(struct ath10k *ar) | 
|  | { | 
|  | int sound_dim = ar->vht_cap_info; | 
|  |  | 
|  | sound_dim &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK; | 
|  | sound_dim >>= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT; | 
|  |  | 
|  | /* If the sounding dimension is not advertised by the firmware, | 
|  | * let's use a default value of 1 | 
|  | */ | 
|  | if (sound_dim == 0) | 
|  | return 1; | 
|  |  | 
|  | return sound_dim; | 
|  | } | 
|  |  | 
|  | static struct ieee80211_sta_vht_cap ath10k_create_vht_cap(struct ath10k *ar) | 
|  | { | 
|  | struct ieee80211_sta_vht_cap vht_cap = {0}; | 
|  | struct ath10k_hw_params *hw = &ar->hw_params; | 
|  | u16 mcs_map; | 
|  | u32 val; | 
|  | int i; | 
|  |  | 
|  | vht_cap.vht_supported = 1; | 
|  | vht_cap.cap = ar->vht_cap_info; | 
|  |  | 
|  | if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | | 
|  | IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) { | 
|  | val = ath10k_mac_get_vht_cap_bf_sts(ar); | 
|  | val <<= IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT; | 
|  | val &= IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK; | 
|  |  | 
|  | vht_cap.cap |= val; | 
|  | } | 
|  |  | 
|  | if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | | 
|  | IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) { | 
|  | val = ath10k_mac_get_vht_cap_bf_sound_dim(ar); | 
|  | val <<= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT; | 
|  | val &= IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK; | 
|  |  | 
|  | vht_cap.cap |= val; | 
|  | } | 
|  |  | 
|  | /* Currently the firmware seems to be buggy, don't enable 80+80 | 
|  | * mode until that's resolved. | 
|  | */ | 
|  | if ((ar->vht_cap_info & IEEE80211_VHT_CAP_SHORT_GI_160) && | 
|  | (ar->vht_cap_info & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) == 0) | 
|  | vht_cap.cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ; | 
|  |  | 
|  | mcs_map = 0; | 
|  | for (i = 0; i < 8; i++) { | 
|  | if ((i < ar->num_rf_chains) && (ar->cfg_tx_chainmask & BIT(i))) | 
|  | mcs_map |= IEEE80211_VHT_MCS_SUPPORT_0_9 << (i * 2); | 
|  | else | 
|  | mcs_map |= IEEE80211_VHT_MCS_NOT_SUPPORTED << (i * 2); | 
|  | } | 
|  |  | 
|  | if (ar->cfg_tx_chainmask <= 1) | 
|  | vht_cap.cap &= ~IEEE80211_VHT_CAP_TXSTBC; | 
|  |  | 
|  | vht_cap.vht_mcs.rx_mcs_map = cpu_to_le16(mcs_map); | 
|  | vht_cap.vht_mcs.tx_mcs_map = cpu_to_le16(mcs_map); | 
|  |  | 
|  | /* If we are supporting 160Mhz or 80+80, then the NIC may be able to do | 
|  | * a restricted NSS for 160 or 80+80 vs what it can do for 80Mhz.  Give | 
|  | * user-space a clue if that is the case. | 
|  | */ | 
|  | if ((vht_cap.cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) && | 
|  | (hw->vht160_mcs_rx_highest != 0 || | 
|  | hw->vht160_mcs_tx_highest != 0)) { | 
|  | vht_cap.vht_mcs.rx_highest = cpu_to_le16(hw->vht160_mcs_rx_highest); | 
|  | vht_cap.vht_mcs.tx_highest = cpu_to_le16(hw->vht160_mcs_tx_highest); | 
|  | } | 
|  |  | 
|  | return vht_cap; | 
|  | } | 
|  |  | 
|  | static struct ieee80211_sta_ht_cap ath10k_get_ht_cap(struct ath10k *ar) | 
|  | { | 
|  | int i; | 
|  | struct ieee80211_sta_ht_cap ht_cap = {0}; | 
|  |  | 
|  | if (!(ar->ht_cap_info & WMI_HT_CAP_ENABLED)) | 
|  | return ht_cap; | 
|  |  | 
|  | ht_cap.ht_supported = 1; | 
|  | ht_cap.ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K; | 
|  | ht_cap.ampdu_density = IEEE80211_HT_MPDU_DENSITY_8; | 
|  | ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; | 
|  | ht_cap.cap |= IEEE80211_HT_CAP_DSSSCCK40; | 
|  | ht_cap.cap |= | 
|  | WLAN_HT_CAP_SM_PS_DISABLED << IEEE80211_HT_CAP_SM_PS_SHIFT; | 
|  |  | 
|  | if (ar->ht_cap_info & WMI_HT_CAP_HT20_SGI) | 
|  | ht_cap.cap |= IEEE80211_HT_CAP_SGI_20; | 
|  |  | 
|  | if (ar->ht_cap_info & WMI_HT_CAP_HT40_SGI) | 
|  | ht_cap.cap |= IEEE80211_HT_CAP_SGI_40; | 
|  |  | 
|  | if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) { | 
|  | u32 smps; | 
|  |  | 
|  | smps   = WLAN_HT_CAP_SM_PS_DYNAMIC; | 
|  | smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT; | 
|  |  | 
|  | ht_cap.cap |= smps; | 
|  | } | 
|  |  | 
|  | if (ar->ht_cap_info & WMI_HT_CAP_TX_STBC && (ar->cfg_tx_chainmask > 1)) | 
|  | ht_cap.cap |= IEEE80211_HT_CAP_TX_STBC; | 
|  |  | 
|  | if (ar->ht_cap_info & WMI_HT_CAP_RX_STBC) { | 
|  | u32 stbc; | 
|  |  | 
|  | stbc   = ar->ht_cap_info; | 
|  | stbc  &= WMI_HT_CAP_RX_STBC; | 
|  | stbc >>= WMI_HT_CAP_RX_STBC_MASK_SHIFT; | 
|  | stbc <<= IEEE80211_HT_CAP_RX_STBC_SHIFT; | 
|  | stbc  &= IEEE80211_HT_CAP_RX_STBC; | 
|  |  | 
|  | ht_cap.cap |= stbc; | 
|  | } | 
|  |  | 
|  | if (ar->ht_cap_info & WMI_HT_CAP_LDPC || (ar->ht_cap_info & | 
|  | WMI_HT_CAP_RX_LDPC && (ar->ht_cap_info & WMI_HT_CAP_TX_LDPC))) | 
|  | ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING; | 
|  |  | 
|  | if (ar->ht_cap_info & WMI_HT_CAP_L_SIG_TXOP_PROT) | 
|  | ht_cap.cap |= IEEE80211_HT_CAP_LSIG_TXOP_PROT; | 
|  |  | 
|  | /* max AMSDU is implicitly taken from vht_cap_info */ | 
|  | if (ar->vht_cap_info & WMI_VHT_CAP_MAX_MPDU_LEN_MASK) | 
|  | ht_cap.cap |= IEEE80211_HT_CAP_MAX_AMSDU; | 
|  |  | 
|  | for (i = 0; i < ar->num_rf_chains; i++) { | 
|  | if (ar->cfg_rx_chainmask & BIT(i)) | 
|  | ht_cap.mcs.rx_mask[i] = 0xFF; | 
|  | } | 
|  |  | 
|  | ht_cap.mcs.tx_params |= IEEE80211_HT_MCS_TX_DEFINED; | 
|  |  | 
|  | return ht_cap; | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_setup_ht_vht_cap(struct ath10k *ar) | 
|  | { | 
|  | struct ieee80211_supported_band *band; | 
|  | struct ieee80211_sta_vht_cap vht_cap; | 
|  | struct ieee80211_sta_ht_cap ht_cap; | 
|  |  | 
|  | ht_cap = ath10k_get_ht_cap(ar); | 
|  | vht_cap = ath10k_create_vht_cap(ar); | 
|  |  | 
|  | if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) { | 
|  | band = &ar->mac.sbands[NL80211_BAND_2GHZ]; | 
|  | band->ht_cap = ht_cap; | 
|  | } | 
|  | if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) { | 
|  | band = &ar->mac.sbands[NL80211_BAND_5GHZ]; | 
|  | band->ht_cap = ht_cap; | 
|  | band->vht_cap = vht_cap; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int __ath10k_set_antenna(struct ath10k *ar, u32 tx_ant, u32 rx_ant) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | ath10k_check_chain_mask(ar, tx_ant, "tx"); | 
|  | ath10k_check_chain_mask(ar, rx_ant, "rx"); | 
|  |  | 
|  | ar->cfg_tx_chainmask = tx_ant; | 
|  | ar->cfg_rx_chainmask = rx_ant; | 
|  |  | 
|  | if ((ar->state != ATH10K_STATE_ON) && | 
|  | (ar->state != ATH10K_STATE_RESTARTED)) | 
|  | return 0; | 
|  |  | 
|  | ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->tx_chain_mask, | 
|  | tx_ant); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set tx-chainmask: %d, req 0x%x\n", | 
|  | ret, tx_ant); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->rx_chain_mask, | 
|  | rx_ant); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set rx-chainmask: %d, req 0x%x\n", | 
|  | ret, rx_ant); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Reload HT/VHT capability */ | 
|  | ath10k_mac_setup_ht_vht_cap(ar); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_set_antenna(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  | ret = __ath10k_set_antenna(ar, tx_ant, rx_ant); | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __ath10k_fetch_bb_timing_dt(struct ath10k *ar, | 
|  | struct wmi_bb_timing_cfg_arg *bb_timing) | 
|  | { | 
|  | struct device_node *node; | 
|  | const char *fem_name; | 
|  | int ret; | 
|  |  | 
|  | node = ar->dev->of_node; | 
|  | if (!node) | 
|  | return -ENOENT; | 
|  |  | 
|  | ret = of_property_read_string_index(node, "ext-fem-name", 0, &fem_name); | 
|  | if (ret) | 
|  | return -ENOENT; | 
|  |  | 
|  | /* | 
|  | * If external Front End module used in hardware, then default base band timing | 
|  | * parameter cannot be used since they were fine tuned for reference hardware, | 
|  | * so choosing different value suitable for that external FEM. | 
|  | */ | 
|  | if (!strcmp("microsemi-lx5586", fem_name)) { | 
|  | bb_timing->bb_tx_timing = 0x00; | 
|  | bb_timing->bb_xpa_timing = 0x0101; | 
|  | } else { | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_BOOT, "boot bb_tx_timing 0x%x bb_xpa_timing 0x%x\n", | 
|  | bb_timing->bb_tx_timing, bb_timing->bb_xpa_timing); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_start(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | u32 param; | 
|  | int ret = 0; | 
|  | struct wmi_bb_timing_cfg_arg bb_timing = {0}; | 
|  |  | 
|  | /* | 
|  | * This makes sense only when restarting hw. It is harmless to call | 
|  | * unconditionally. This is necessary to make sure no HTT/WMI tx | 
|  | * commands will be submitted while restarting. | 
|  | */ | 
|  | ath10k_drain_tx(ar); | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | switch (ar->state) { | 
|  | case ATH10K_STATE_OFF: | 
|  | ar->state = ATH10K_STATE_ON; | 
|  | break; | 
|  | case ATH10K_STATE_RESTARTING: | 
|  | ar->state = ATH10K_STATE_RESTARTED; | 
|  | break; | 
|  | case ATH10K_STATE_ON: | 
|  | case ATH10K_STATE_RESTARTED: | 
|  | case ATH10K_STATE_WEDGED: | 
|  | WARN_ON(1); | 
|  | ret = -EINVAL; | 
|  | goto err; | 
|  | case ATH10K_STATE_UTF: | 
|  | ret = -EBUSY; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | ret = ath10k_hif_power_up(ar, ATH10K_FIRMWARE_MODE_NORMAL); | 
|  | if (ret) { | 
|  | ath10k_err(ar, "Could not init hif: %d\n", ret); | 
|  | goto err_off; | 
|  | } | 
|  |  | 
|  | ret = ath10k_core_start(ar, ATH10K_FIRMWARE_MODE_NORMAL, | 
|  | &ar->normal_mode_fw); | 
|  | if (ret) { | 
|  | ath10k_err(ar, "Could not init core: %d\n", ret); | 
|  | goto err_power_down; | 
|  | } | 
|  |  | 
|  | param = ar->wmi.pdev_param->pmf_qos; | 
|  | ret = ath10k_wmi_pdev_set_param(ar, param, 1); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to enable PMF QOS: %d\n", ret); | 
|  | goto err_core_stop; | 
|  | } | 
|  |  | 
|  | param = ar->wmi.pdev_param->dynamic_bw; | 
|  | ret = ath10k_wmi_pdev_set_param(ar, param, 1); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to enable dynamic BW: %d\n", ret); | 
|  | goto err_core_stop; | 
|  | } | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_SPOOF_MAC_SUPPORT, ar->wmi.svc_map)) { | 
|  | ret = ath10k_wmi_scan_prob_req_oui(ar, ar->mac_addr); | 
|  | if (ret) { | 
|  | ath10k_err(ar, "failed to set prob req oui: %i\n", ret); | 
|  | goto err_core_stop; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_ADAPTIVE_OCS, ar->wmi.svc_map)) { | 
|  | ret = ath10k_wmi_adaptive_qcs(ar, true); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to enable adaptive qcs: %d\n", | 
|  | ret); | 
|  | goto err_core_stop; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_BURST, ar->wmi.svc_map)) { | 
|  | param = ar->wmi.pdev_param->burst_enable; | 
|  | ret = ath10k_wmi_pdev_set_param(ar, param, 0); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to disable burst: %d\n", ret); | 
|  | goto err_core_stop; | 
|  | } | 
|  | } | 
|  |  | 
|  | param = ar->wmi.pdev_param->idle_ps_config; | 
|  | ret = ath10k_wmi_pdev_set_param(ar, param, 1); | 
|  | if (ret && ret != -EOPNOTSUPP) { | 
|  | ath10k_warn(ar, "failed to enable idle_ps_config: %d\n", ret); | 
|  | goto err_core_stop; | 
|  | } | 
|  |  | 
|  | __ath10k_set_antenna(ar, ar->cfg_tx_chainmask, ar->cfg_rx_chainmask); | 
|  |  | 
|  | /* | 
|  | * By default FW set ARP frames ac to voice (6). In that case ARP | 
|  | * exchange is not working properly for UAPSD enabled AP. ARP requests | 
|  | * which arrives with access category 0 are processed by network stack | 
|  | * and send back with access category 0, but FW changes access category | 
|  | * to 6. Set ARP frames access category to best effort (0) solves | 
|  | * this problem. | 
|  | */ | 
|  |  | 
|  | param = ar->wmi.pdev_param->arp_ac_override; | 
|  | ret = ath10k_wmi_pdev_set_param(ar, param, 0); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set arp ac override parameter: %d\n", | 
|  | ret); | 
|  | goto err_core_stop; | 
|  | } | 
|  |  | 
|  | if (test_bit(ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA, | 
|  | ar->running_fw->fw_file.fw_features)) { | 
|  | ret = ath10k_wmi_pdev_enable_adaptive_cca(ar, 1, | 
|  | WMI_CCA_DETECT_LEVEL_AUTO, | 
|  | WMI_CCA_DETECT_MARGIN_AUTO); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to enable adaptive cca: %d\n", | 
|  | ret); | 
|  | goto err_core_stop; | 
|  | } | 
|  | } | 
|  |  | 
|  | param = ar->wmi.pdev_param->ani_enable; | 
|  | ret = ath10k_wmi_pdev_set_param(ar, param, 1); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to enable ani by default: %d\n", | 
|  | ret); | 
|  | goto err_core_stop; | 
|  | } | 
|  |  | 
|  | ar->ani_enabled = true; | 
|  |  | 
|  | if (ath10k_peer_stats_enabled(ar)) { | 
|  | param = ar->wmi.pdev_param->peer_stats_update_period; | 
|  | ret = ath10k_wmi_pdev_set_param(ar, param, | 
|  | PEER_DEFAULT_STATS_UPDATE_PERIOD); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, | 
|  | "failed to set peer stats period : %d\n", | 
|  | ret); | 
|  | goto err_core_stop; | 
|  | } | 
|  | } | 
|  |  | 
|  | param = ar->wmi.pdev_param->enable_btcoex; | 
|  | if (test_bit(WMI_SERVICE_COEX_GPIO, ar->wmi.svc_map) && | 
|  | test_bit(ATH10K_FW_FEATURE_BTCOEX_PARAM, | 
|  | ar->running_fw->fw_file.fw_features)) { | 
|  | ret = ath10k_wmi_pdev_set_param(ar, param, 0); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, | 
|  | "failed to set btcoex param: %d\n", ret); | 
|  | goto err_core_stop; | 
|  | } | 
|  | clear_bit(ATH10K_FLAG_BTCOEX, &ar->dev_flags); | 
|  | } | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, ar->wmi.svc_map)) { | 
|  | ret = __ath10k_fetch_bb_timing_dt(ar, &bb_timing); | 
|  | if (!ret) { | 
|  | ret = ath10k_wmi_pdev_bb_timing(ar, &bb_timing); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, | 
|  | "failed to set bb timings: %d\n", | 
|  | ret); | 
|  | goto err_core_stop; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | ar->num_started_vdevs = 0; | 
|  | ath10k_regd_update(ar); | 
|  |  | 
|  | ath10k_spectral_start(ar); | 
|  | ath10k_thermal_set_throttling(ar); | 
|  |  | 
|  | ar->radar_conf_state = ATH10K_RADAR_CONFIRMATION_IDLE; | 
|  |  | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return 0; | 
|  |  | 
|  | err_core_stop: | 
|  | ath10k_core_stop(ar); | 
|  |  | 
|  | err_power_down: | 
|  | ath10k_hif_power_down(ar); | 
|  |  | 
|  | err_off: | 
|  | ar->state = ATH10K_STATE_OFF; | 
|  |  | 
|  | err: | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void ath10k_stop(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  |  | 
|  | ath10k_drain_tx(ar); | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  | if (ar->state != ATH10K_STATE_OFF) { | 
|  | ath10k_halt(ar); | 
|  | ar->state = ATH10K_STATE_OFF; | 
|  | } | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  |  | 
|  | cancel_work_sync(&ar->set_coverage_class_work); | 
|  | cancel_delayed_work_sync(&ar->scan.timeout); | 
|  | cancel_work_sync(&ar->restart_work); | 
|  | } | 
|  |  | 
|  | static int ath10k_config_ps(struct ath10k *ar) | 
|  | { | 
|  | struct ath10k_vif *arvif; | 
|  | int ret = 0; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | list_for_each_entry(arvif, &ar->arvifs, list) { | 
|  | ret = ath10k_mac_vif_setup_ps(arvif); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to setup powersave: %d\n", ret); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_txpower_setup(struct ath10k *ar, int txpower) | 
|  | { | 
|  | int ret; | 
|  | u32 param; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac txpower %d\n", txpower); | 
|  |  | 
|  | param = ar->wmi.pdev_param->txpower_limit2g; | 
|  | ret = ath10k_wmi_pdev_set_param(ar, param, txpower * 2); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set 2g txpower %d: %d\n", | 
|  | txpower, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | param = ar->wmi.pdev_param->txpower_limit5g; | 
|  | ret = ath10k_wmi_pdev_set_param(ar, param, txpower * 2); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set 5g txpower %d: %d\n", | 
|  | txpower, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_txpower_recalc(struct ath10k *ar) | 
|  | { | 
|  | struct ath10k_vif *arvif; | 
|  | int ret, txpower = -1; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | list_for_each_entry(arvif, &ar->arvifs, list) { | 
|  | if (arvif->txpower <= 0) | 
|  | continue; | 
|  |  | 
|  | if (txpower == -1) | 
|  | txpower = arvif->txpower; | 
|  | else | 
|  | txpower = min(txpower, arvif->txpower); | 
|  | } | 
|  |  | 
|  | if (txpower == -1) | 
|  | return 0; | 
|  |  | 
|  | ret = ath10k_mac_txpower_setup(ar, txpower); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to setup tx power %d: %d\n", | 
|  | txpower, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_config(struct ieee80211_hw *hw, u32 changed) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ieee80211_conf *conf = &hw->conf; | 
|  | int ret = 0; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | if (changed & IEEE80211_CONF_CHANGE_PS) | 
|  | ath10k_config_ps(ar); | 
|  |  | 
|  | if (changed & IEEE80211_CONF_CHANGE_MONITOR) { | 
|  | ar->monitor = conf->flags & IEEE80211_CONF_MONITOR; | 
|  | ret = ath10k_monitor_recalc(ar); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to recalc monitor: %d\n", ret); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static u32 get_nss_from_chainmask(u16 chain_mask) | 
|  | { | 
|  | if ((chain_mask & 0xf) == 0xf) | 
|  | return 4; | 
|  | else if ((chain_mask & 0x7) == 0x7) | 
|  | return 3; | 
|  | else if ((chain_mask & 0x3) == 0x3) | 
|  | return 2; | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_set_txbf_conf(struct ath10k_vif *arvif) | 
|  | { | 
|  | u32 value = 0; | 
|  | struct ath10k *ar = arvif->ar; | 
|  | int nsts; | 
|  | int sound_dim; | 
|  |  | 
|  | if (ath10k_wmi_get_txbf_conf_scheme(ar) != WMI_TXBF_CONF_BEFORE_ASSOC) | 
|  | return 0; | 
|  |  | 
|  | nsts = ath10k_mac_get_vht_cap_bf_sts(ar); | 
|  | if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | | 
|  | IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE)) | 
|  | value |= SM(nsts, WMI_TXBF_STS_CAP_OFFSET); | 
|  |  | 
|  | sound_dim = ath10k_mac_get_vht_cap_bf_sound_dim(ar); | 
|  | if (ar->vht_cap_info & (IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | | 
|  | IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) | 
|  | value |= SM(sound_dim, WMI_BF_SOUND_DIM_OFFSET); | 
|  |  | 
|  | if (!value) | 
|  | return 0; | 
|  |  | 
|  | if (ar->vht_cap_info & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE) | 
|  | value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFER; | 
|  |  | 
|  | if (ar->vht_cap_info & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE) | 
|  | value |= (WMI_VDEV_PARAM_TXBF_MU_TX_BFER | | 
|  | WMI_VDEV_PARAM_TXBF_SU_TX_BFER); | 
|  |  | 
|  | if (ar->vht_cap_info & IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE) | 
|  | value |= WMI_VDEV_PARAM_TXBF_SU_TX_BFEE; | 
|  |  | 
|  | if (ar->vht_cap_info & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) | 
|  | value |= (WMI_VDEV_PARAM_TXBF_MU_TX_BFEE | | 
|  | WMI_VDEV_PARAM_TXBF_SU_TX_BFEE); | 
|  |  | 
|  | return ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, | 
|  | ar->wmi.vdev_param->txbf, value); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * TODO: | 
|  | * Figure out how to handle WMI_VDEV_SUBTYPE_P2P_DEVICE, | 
|  | * because we will send mgmt frames without CCK. This requirement | 
|  | * for P2P_FIND/GO_NEG should be handled by checking CCK flag | 
|  | * in the TX packet. | 
|  | */ | 
|  | static int ath10k_add_interface(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct ath10k_peer *peer; | 
|  | enum wmi_sta_powersave_param param; | 
|  | int ret = 0; | 
|  | u32 value; | 
|  | int bit; | 
|  | int i; | 
|  | u32 vdev_param; | 
|  |  | 
|  | vif->driver_flags |= IEEE80211_VIF_SUPPORTS_UAPSD; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | memset(arvif, 0, sizeof(*arvif)); | 
|  | ath10k_mac_txq_init(vif->txq); | 
|  |  | 
|  | arvif->ar = ar; | 
|  | arvif->vif = vif; | 
|  |  | 
|  | INIT_LIST_HEAD(&arvif->list); | 
|  | INIT_WORK(&arvif->ap_csa_work, ath10k_mac_vif_ap_csa_work); | 
|  | INIT_DELAYED_WORK(&arvif->connection_loss_work, | 
|  | ath10k_mac_vif_sta_connection_loss_work); | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(arvif->bitrate_mask.control); i++) { | 
|  | arvif->bitrate_mask.control[i].legacy = 0xffffffff; | 
|  | memset(arvif->bitrate_mask.control[i].ht_mcs, 0xff, | 
|  | sizeof(arvif->bitrate_mask.control[i].ht_mcs)); | 
|  | memset(arvif->bitrate_mask.control[i].vht_mcs, 0xff, | 
|  | sizeof(arvif->bitrate_mask.control[i].vht_mcs)); | 
|  | } | 
|  |  | 
|  | if (ar->num_peers >= ar->max_num_peers) { | 
|  | ath10k_warn(ar, "refusing vdev creation due to insufficient peer entry resources in firmware\n"); | 
|  | ret = -ENOBUFS; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (ar->free_vdev_map == 0) { | 
|  | ath10k_warn(ar, "Free vdev map is empty, no more interfaces allowed.\n"); | 
|  | ret = -EBUSY; | 
|  | goto err; | 
|  | } | 
|  | bit = __ffs64(ar->free_vdev_map); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac create vdev %i map %llx\n", | 
|  | bit, ar->free_vdev_map); | 
|  |  | 
|  | arvif->vdev_id = bit; | 
|  | arvif->vdev_subtype = | 
|  | ath10k_wmi_get_vdev_subtype(ar, WMI_VDEV_SUBTYPE_NONE); | 
|  |  | 
|  | switch (vif->type) { | 
|  | case NL80211_IFTYPE_P2P_DEVICE: | 
|  | arvif->vdev_type = WMI_VDEV_TYPE_STA; | 
|  | arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype | 
|  | (ar, WMI_VDEV_SUBTYPE_P2P_DEVICE); | 
|  | break; | 
|  | case NL80211_IFTYPE_UNSPECIFIED: | 
|  | case NL80211_IFTYPE_STATION: | 
|  | arvif->vdev_type = WMI_VDEV_TYPE_STA; | 
|  | if (vif->p2p) | 
|  | arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype | 
|  | (ar, WMI_VDEV_SUBTYPE_P2P_CLIENT); | 
|  | break; | 
|  | case NL80211_IFTYPE_ADHOC: | 
|  | arvif->vdev_type = WMI_VDEV_TYPE_IBSS; | 
|  | break; | 
|  | case NL80211_IFTYPE_MESH_POINT: | 
|  | if (test_bit(WMI_SERVICE_MESH_11S, ar->wmi.svc_map)) { | 
|  | arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype | 
|  | (ar, WMI_VDEV_SUBTYPE_MESH_11S); | 
|  | } else if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) { | 
|  | ret = -EINVAL; | 
|  | ath10k_warn(ar, "must load driver with rawmode=1 to add mesh interfaces\n"); | 
|  | goto err; | 
|  | } | 
|  | arvif->vdev_type = WMI_VDEV_TYPE_AP; | 
|  | break; | 
|  | case NL80211_IFTYPE_AP: | 
|  | arvif->vdev_type = WMI_VDEV_TYPE_AP; | 
|  |  | 
|  | if (vif->p2p) | 
|  | arvif->vdev_subtype = ath10k_wmi_get_vdev_subtype | 
|  | (ar, WMI_VDEV_SUBTYPE_P2P_GO); | 
|  | break; | 
|  | case NL80211_IFTYPE_MONITOR: | 
|  | arvif->vdev_type = WMI_VDEV_TYPE_MONITOR; | 
|  | break; | 
|  | default: | 
|  | WARN_ON(1); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Using vdev_id as queue number will make it very easy to do per-vif | 
|  | * tx queue locking. This shouldn't wrap due to interface combinations | 
|  | * but do a modulo for correctness sake and prevent using offchannel tx | 
|  | * queues for regular vif tx. | 
|  | */ | 
|  | vif->cab_queue = arvif->vdev_id % (IEEE80211_MAX_QUEUES - 1); | 
|  | for (i = 0; i < ARRAY_SIZE(vif->hw_queue); i++) | 
|  | vif->hw_queue[i] = arvif->vdev_id % (IEEE80211_MAX_QUEUES - 1); | 
|  |  | 
|  | /* Some firmware revisions don't wait for beacon tx completion before | 
|  | * sending another SWBA event. This could lead to hardware using old | 
|  | * (freed) beacon data in some cases, e.g. tx credit starvation | 
|  | * combined with missed TBTT. This is very very rare. | 
|  | * | 
|  | * On non-IOMMU-enabled hosts this could be a possible security issue | 
|  | * because hw could beacon some random data on the air.  On | 
|  | * IOMMU-enabled hosts DMAR faults would occur in most cases and target | 
|  | * device would crash. | 
|  | * | 
|  | * Since there are no beacon tx completions (implicit nor explicit) | 
|  | * propagated to host the only workaround for this is to allocate a | 
|  | * DMA-coherent buffer for a lifetime of a vif and use it for all | 
|  | * beacon tx commands. Worst case for this approach is some beacons may | 
|  | * become corrupted, e.g. have garbled IEs or out-of-date TIM bitmap. | 
|  | */ | 
|  | if (vif->type == NL80211_IFTYPE_ADHOC || | 
|  | vif->type == NL80211_IFTYPE_MESH_POINT || | 
|  | vif->type == NL80211_IFTYPE_AP) { | 
|  | arvif->beacon_buf = dma_alloc_coherent(ar->dev, | 
|  | IEEE80211_MAX_FRAME_LEN, | 
|  | &arvif->beacon_paddr, | 
|  | GFP_ATOMIC); | 
|  | if (!arvif->beacon_buf) { | 
|  | ret = -ENOMEM; | 
|  | ath10k_warn(ar, "failed to allocate beacon buffer: %d\n", | 
|  | ret); | 
|  | goto err; | 
|  | } | 
|  | } | 
|  | if (test_bit(ATH10K_FLAG_HW_CRYPTO_DISABLED, &ar->dev_flags)) | 
|  | arvif->nohwcrypt = true; | 
|  |  | 
|  | if (arvif->nohwcrypt && | 
|  | !test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) { | 
|  | ath10k_warn(ar, "cryptmode module param needed for sw crypto\n"); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev create %d (add interface) type %d subtype %d bcnmode %s\n", | 
|  | arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype, | 
|  | arvif->beacon_buf ? "single-buf" : "per-skb"); | 
|  |  | 
|  | ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type, | 
|  | arvif->vdev_subtype, vif->addr); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to create WMI vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, | 
|  | ar->wmi.svc_map)) { | 
|  | vdev_param = ar->wmi.vdev_param->disable_4addr_src_lrn; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | 
|  | WMI_VDEV_DISABLE_4_ADDR_SRC_LRN); | 
|  | if (ret && ret != -EOPNOTSUPP) { | 
|  | ath10k_warn(ar, "failed to disable 4addr src lrn vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | } | 
|  | } | 
|  |  | 
|  | ar->free_vdev_map &= ~(1LL << arvif->vdev_id); | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | list_add(&arvif->list, &ar->arvifs); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | /* It makes no sense to have firmware do keepalives. mac80211 already | 
|  | * takes care of this with idle connection polling. | 
|  | */ | 
|  | ret = ath10k_mac_vif_disable_keepalive(arvif); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to disable keepalive on vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | goto err_vdev_delete; | 
|  | } | 
|  |  | 
|  | arvif->def_wep_key_idx = -1; | 
|  |  | 
|  | vdev_param = ar->wmi.vdev_param->tx_encap_type; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | 
|  | ATH10K_HW_TXRX_NATIVE_WIFI); | 
|  | /* 10.X firmware does not support this VDEV parameter. Do not warn */ | 
|  | if (ret && ret != -EOPNOTSUPP) { | 
|  | ath10k_warn(ar, "failed to set vdev %i TX encapsulation: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | goto err_vdev_delete; | 
|  | } | 
|  |  | 
|  | /* Configuring number of spatial stream for monitor interface is causing | 
|  | * target assert in qca9888 and qca6174. | 
|  | */ | 
|  | if (ar->cfg_tx_chainmask && (vif->type != NL80211_IFTYPE_MONITOR)) { | 
|  | u16 nss = get_nss_from_chainmask(ar->cfg_tx_chainmask); | 
|  |  | 
|  | vdev_param = ar->wmi.vdev_param->nss; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | 
|  | nss); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set vdev %i chainmask 0x%x, nss %i: %d\n", | 
|  | arvif->vdev_id, ar->cfg_tx_chainmask, nss, | 
|  | ret); | 
|  | goto err_vdev_delete; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (arvif->vdev_type == WMI_VDEV_TYPE_AP || | 
|  | arvif->vdev_type == WMI_VDEV_TYPE_IBSS) { | 
|  | ret = ath10k_peer_create(ar, vif, NULL, arvif->vdev_id, | 
|  | vif->addr, WMI_PEER_TYPE_DEFAULT); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to create vdev %i peer for AP/IBSS: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | goto err_vdev_delete; | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  |  | 
|  | peer = ath10k_peer_find(ar, arvif->vdev_id, vif->addr); | 
|  | if (!peer) { | 
|  | ath10k_warn(ar, "failed to lookup peer %pM on vdev %i\n", | 
|  | vif->addr, arvif->vdev_id); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  | ret = -ENOENT; | 
|  | goto err_peer_delete; | 
|  | } | 
|  |  | 
|  | arvif->peer_id = find_first_bit(peer->peer_ids, | 
|  | ATH10K_MAX_NUM_PEER_IDS); | 
|  |  | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  | } else { | 
|  | arvif->peer_id = HTT_INVALID_PEERID; | 
|  | } | 
|  |  | 
|  | if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { | 
|  | ret = ath10k_mac_set_kickout(arvif); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set vdev %i kickout parameters: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | goto err_peer_delete; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (arvif->vdev_type == WMI_VDEV_TYPE_STA) { | 
|  | param = WMI_STA_PS_PARAM_RX_WAKE_POLICY; | 
|  | value = WMI_STA_PS_RX_WAKE_POLICY_WAKE; | 
|  | ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, | 
|  | param, value); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set vdev %i RX wake policy: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | goto err_peer_delete; | 
|  | } | 
|  |  | 
|  | ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | goto err_peer_delete; | 
|  | } | 
|  |  | 
|  | ret = ath10k_mac_vif_recalc_ps_poll_count(arvif); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to recalc ps poll count on vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | goto err_peer_delete; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = ath10k_mac_set_txbf_conf(arvif); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set txbf for vdev %d: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | goto err_peer_delete; | 
|  | } | 
|  |  | 
|  | ret = ath10k_mac_set_rts(arvif, ar->hw->wiphy->rts_threshold); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set rts threshold for vdev %d: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | goto err_peer_delete; | 
|  | } | 
|  |  | 
|  | arvif->txpower = vif->bss_conf.txpower; | 
|  | ret = ath10k_mac_txpower_recalc(ar); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to recalc tx power: %d\n", ret); | 
|  | goto err_peer_delete; | 
|  | } | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_RTT_RESPONDER_ROLE, ar->wmi.svc_map)) { | 
|  | vdev_param = ar->wmi.vdev_param->rtt_responder_role; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | 
|  | arvif->ftm_responder); | 
|  |  | 
|  | /* It is harmless to not set FTM role. Do not warn */ | 
|  | if (ret && ret != -EOPNOTSUPP) | 
|  | ath10k_warn(ar, "failed to set vdev %i FTM Responder: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | } | 
|  |  | 
|  | if (vif->type == NL80211_IFTYPE_MONITOR) { | 
|  | ar->monitor_arvif = arvif; | 
|  | ret = ath10k_monitor_recalc(ar); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to recalc monitor: %d\n", ret); | 
|  | goto err_peer_delete; | 
|  | } | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&ar->htt.tx_lock); | 
|  | if (!ar->tx_paused) | 
|  | ieee80211_wake_queue(ar->hw, arvif->vdev_id); | 
|  | spin_unlock_bh(&ar->htt.tx_lock); | 
|  |  | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return 0; | 
|  |  | 
|  | err_peer_delete: | 
|  | if (arvif->vdev_type == WMI_VDEV_TYPE_AP || | 
|  | arvif->vdev_type == WMI_VDEV_TYPE_IBSS) { | 
|  | ath10k_wmi_peer_delete(ar, arvif->vdev_id, vif->addr); | 
|  | ath10k_wait_for_peer_delete_done(ar, arvif->vdev_id, | 
|  | vif->addr); | 
|  | } | 
|  |  | 
|  | err_vdev_delete: | 
|  | ath10k_wmi_vdev_delete(ar, arvif->vdev_id); | 
|  | ar->free_vdev_map |= 1LL << arvif->vdev_id; | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | list_del(&arvif->list); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | err: | 
|  | if (arvif->beacon_buf) { | 
|  | dma_free_coherent(ar->dev, IEEE80211_MAX_FRAME_LEN, | 
|  | arvif->beacon_buf, arvif->beacon_paddr); | 
|  | arvif->beacon_buf = NULL; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_vif_tx_unlock_all(struct ath10k_vif *arvif) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < BITS_PER_LONG; i++) | 
|  | ath10k_mac_vif_tx_unlock(arvif, i); | 
|  | } | 
|  |  | 
|  | static void ath10k_remove_interface(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct ath10k_peer *peer; | 
|  | unsigned long time_left; | 
|  | int ret; | 
|  | int i; | 
|  |  | 
|  | cancel_work_sync(&arvif->ap_csa_work); | 
|  | cancel_delayed_work_sync(&arvif->connection_loss_work); | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | ath10k_mac_vif_beacon_cleanup(arvif); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | ret = ath10k_spectral_vif_stop(arvif); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to stop spectral for vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  |  | 
|  | ar->free_vdev_map |= 1LL << arvif->vdev_id; | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | list_del(&arvif->list); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | if (arvif->vdev_type == WMI_VDEV_TYPE_AP || | 
|  | arvif->vdev_type == WMI_VDEV_TYPE_IBSS) { | 
|  | ret = ath10k_wmi_peer_delete(arvif->ar, arvif->vdev_id, | 
|  | vif->addr); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to submit AP/IBSS self-peer removal on vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  |  | 
|  | ath10k_wait_for_peer_delete_done(ar, arvif->vdev_id, | 
|  | vif->addr); | 
|  | kfree(arvif->u.ap.noa_data); | 
|  | } | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %i delete (remove interface)\n", | 
|  | arvif->vdev_id); | 
|  |  | 
|  | ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to delete WMI vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_SYNC_DELETE_CMDS, ar->wmi.svc_map)) { | 
|  | time_left = wait_for_completion_timeout(&ar->vdev_delete_done, | 
|  | ATH10K_VDEV_DELETE_TIMEOUT_HZ); | 
|  | if (time_left == 0) { | 
|  | ath10k_warn(ar, "Timeout in receiving vdev delete response\n"); | 
|  | goto out; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Some firmware revisions don't notify host about self-peer removal | 
|  | * until after associated vdev is deleted. | 
|  | */ | 
|  | if (arvif->vdev_type == WMI_VDEV_TYPE_AP || | 
|  | arvif->vdev_type == WMI_VDEV_TYPE_IBSS) { | 
|  | ret = ath10k_wait_for_peer_deleted(ar, arvif->vdev_id, | 
|  | vif->addr); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to remove AP self-peer on vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | ar->num_peers--; | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | for (i = 0; i < ARRAY_SIZE(ar->peer_map); i++) { | 
|  | peer = ar->peer_map[i]; | 
|  | if (!peer) | 
|  | continue; | 
|  |  | 
|  | if (peer->vif == vif) { | 
|  | ath10k_warn(ar, "found vif peer %pM entry on vdev %i after it was supposedly removed\n", | 
|  | vif->addr, arvif->vdev_id); | 
|  | peer->vif = NULL; | 
|  | } | 
|  | } | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | ath10k_peer_cleanup(ar, arvif->vdev_id); | 
|  | ath10k_mac_txq_unref(ar, vif->txq); | 
|  |  | 
|  | if (vif->type == NL80211_IFTYPE_MONITOR) { | 
|  | ar->monitor_arvif = NULL; | 
|  | ret = ath10k_monitor_recalc(ar); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to recalc monitor: %d\n", ret); | 
|  | } | 
|  |  | 
|  | ret = ath10k_mac_txpower_recalc(ar); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to recalc tx power: %d\n", ret); | 
|  |  | 
|  | spin_lock_bh(&ar->htt.tx_lock); | 
|  | ath10k_mac_vif_tx_unlock_all(arvif); | 
|  | spin_unlock_bh(&ar->htt.tx_lock); | 
|  |  | 
|  | ath10k_mac_txq_unref(ar, vif->txq); | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * FIXME: Has to be verified. | 
|  | */ | 
|  | #define SUPPORTED_FILTERS			\ | 
|  | (FIF_ALLMULTI |				\ | 
|  | FIF_CONTROL |				\ | 
|  | FIF_PSPOLL |				\ | 
|  | FIF_OTHER_BSS |				\ | 
|  | FIF_BCN_PRBRESP_PROMISC |		\ | 
|  | FIF_PROBE_REQ |				\ | 
|  | FIF_FCSFAIL) | 
|  |  | 
|  | static void ath10k_configure_filter(struct ieee80211_hw *hw, | 
|  | unsigned int changed_flags, | 
|  | unsigned int *total_flags, | 
|  | u64 multicast) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | changed_flags &= SUPPORTED_FILTERS; | 
|  | *total_flags &= SUPPORTED_FILTERS; | 
|  | ar->filter_flags = *total_flags; | 
|  |  | 
|  | ret = ath10k_monitor_recalc(ar); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to recalc monitor: %d\n", ret); | 
|  |  | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | } | 
|  |  | 
|  | static void ath10k_bss_info_changed(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_bss_conf *info, | 
|  | u32 changed) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct cfg80211_chan_def def; | 
|  | u32 vdev_param, pdev_param, slottime, preamble; | 
|  | u16 bitrate, hw_value; | 
|  | u8 rate, basic_rate_idx, rateidx; | 
|  | int ret = 0, hw_rate_code, mcast_rate; | 
|  | enum nl80211_band band; | 
|  | const struct ieee80211_supported_band *sband; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | if (changed & BSS_CHANGED_IBSS) | 
|  | ath10k_control_ibss(arvif, info, vif->addr); | 
|  |  | 
|  | if (changed & BSS_CHANGED_BEACON_INT) { | 
|  | arvif->beacon_interval = info->beacon_int; | 
|  | vdev_param = ar->wmi.vdev_param->beacon_interval; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | 
|  | arvif->beacon_interval); | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac vdev %d beacon_interval %d\n", | 
|  | arvif->vdev_id, arvif->beacon_interval); | 
|  |  | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to set beacon interval for vdev %d: %i\n", | 
|  | arvif->vdev_id, ret); | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_BEACON) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "vdev %d set beacon tx mode to staggered\n", | 
|  | arvif->vdev_id); | 
|  |  | 
|  | pdev_param = ar->wmi.pdev_param->beacon_tx_mode; | 
|  | ret = ath10k_wmi_pdev_set_param(ar, pdev_param, | 
|  | WMI_BEACON_STAGGERED_MODE); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to set beacon mode for vdev %d: %i\n", | 
|  | arvif->vdev_id, ret); | 
|  |  | 
|  | ret = ath10k_mac_setup_bcn_tmpl(arvif); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to update beacon template: %d\n", | 
|  | ret); | 
|  |  | 
|  | if (ieee80211_vif_is_mesh(vif)) { | 
|  | /* mesh doesn't use SSID but firmware needs it */ | 
|  | strncpy(arvif->u.ap.ssid, "mesh", | 
|  | sizeof(arvif->u.ap.ssid)); | 
|  | arvif->u.ap.ssid_len = 4; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_AP_PROBE_RESP) { | 
|  | ret = ath10k_mac_setup_prb_tmpl(arvif); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to setup probe resp template on vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | } | 
|  |  | 
|  | if (changed & (BSS_CHANGED_BEACON_INFO | BSS_CHANGED_BEACON)) { | 
|  | arvif->dtim_period = info->dtim_period; | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac vdev %d dtim_period %d\n", | 
|  | arvif->vdev_id, arvif->dtim_period); | 
|  |  | 
|  | vdev_param = ar->wmi.vdev_param->dtim_period; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | 
|  | arvif->dtim_period); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to set dtim period for vdev %d: %i\n", | 
|  | arvif->vdev_id, ret); | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_SSID && | 
|  | vif->type == NL80211_IFTYPE_AP) { | 
|  | arvif->u.ap.ssid_len = info->ssid_len; | 
|  | if (info->ssid_len) | 
|  | memcpy(arvif->u.ap.ssid, info->ssid, info->ssid_len); | 
|  | arvif->u.ap.hidden_ssid = info->hidden_ssid; | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_BSSID && !is_zero_ether_addr(info->bssid)) | 
|  | ether_addr_copy(arvif->bssid, info->bssid); | 
|  |  | 
|  | if (changed & BSS_CHANGED_FTM_RESPONDER && | 
|  | arvif->ftm_responder != info->ftm_responder && | 
|  | test_bit(WMI_SERVICE_RTT_RESPONDER_ROLE, ar->wmi.svc_map)) { | 
|  | arvif->ftm_responder = info->ftm_responder; | 
|  |  | 
|  | vdev_param = ar->wmi.vdev_param->rtt_responder_role; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | 
|  | arvif->ftm_responder); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac vdev %d ftm_responder %d:ret %d\n", | 
|  | arvif->vdev_id, arvif->ftm_responder, ret); | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_BEACON_ENABLED) | 
|  | ath10k_control_beaconing(arvif, info); | 
|  |  | 
|  | if (changed & BSS_CHANGED_ERP_CTS_PROT) { | 
|  | arvif->use_cts_prot = info->use_cts_prot; | 
|  |  | 
|  | ret = ath10k_recalc_rtscts_prot(arvif); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to recalculate rts/cts prot for vdev %d: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  |  | 
|  | if (ath10k_mac_can_set_cts_prot(arvif)) { | 
|  | ret = ath10k_mac_set_cts_prot(arvif); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to set cts protection for vdev %d: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_ERP_SLOT) { | 
|  | if (info->use_short_slot) | 
|  | slottime = WMI_VDEV_SLOT_TIME_SHORT; /* 9us */ | 
|  |  | 
|  | else | 
|  | slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */ | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d slot_time %d\n", | 
|  | arvif->vdev_id, slottime); | 
|  |  | 
|  | vdev_param = ar->wmi.vdev_param->slot_time; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | 
|  | slottime); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to set erp slot for vdev %d: %i\n", | 
|  | arvif->vdev_id, ret); | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_ERP_PREAMBLE) { | 
|  | if (info->use_short_preamble) | 
|  | preamble = WMI_VDEV_PREAMBLE_SHORT; | 
|  | else | 
|  | preamble = WMI_VDEV_PREAMBLE_LONG; | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac vdev %d preamble %dn", | 
|  | arvif->vdev_id, preamble); | 
|  |  | 
|  | vdev_param = ar->wmi.vdev_param->preamble; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | 
|  | preamble); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to set preamble for vdev %d: %i\n", | 
|  | arvif->vdev_id, ret); | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_ASSOC) { | 
|  | if (info->assoc) { | 
|  | /* Workaround: Make sure monitor vdev is not running | 
|  | * when associating to prevent some firmware revisions | 
|  | * (e.g. 10.1 and 10.2) from crashing. | 
|  | */ | 
|  | if (ar->monitor_started) | 
|  | ath10k_monitor_stop(ar); | 
|  | ath10k_bss_assoc(hw, vif, info); | 
|  | ath10k_monitor_recalc(ar); | 
|  | } else { | 
|  | ath10k_bss_disassoc(hw, vif); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_TXPOWER) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev_id %i txpower %d\n", | 
|  | arvif->vdev_id, info->txpower); | 
|  |  | 
|  | arvif->txpower = info->txpower; | 
|  | ret = ath10k_mac_txpower_recalc(ar); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to recalc tx power: %d\n", ret); | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_PS) { | 
|  | arvif->ps = vif->bss_conf.ps; | 
|  |  | 
|  | ret = ath10k_config_ps(ar); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to setup ps on vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_MCAST_RATE && | 
|  | !ath10k_mac_vif_chan(arvif->vif, &def)) { | 
|  | band = def.chan->band; | 
|  | mcast_rate = vif->bss_conf.mcast_rate[band]; | 
|  | if (mcast_rate > 0) | 
|  | rateidx = mcast_rate - 1; | 
|  | else | 
|  | rateidx = ffs(vif->bss_conf.basic_rates) - 1; | 
|  |  | 
|  | if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) | 
|  | rateidx += ATH10K_MAC_FIRST_OFDM_RATE_IDX; | 
|  |  | 
|  | bitrate = ath10k_wmi_legacy_rates[rateidx].bitrate; | 
|  | hw_value = ath10k_wmi_legacy_rates[rateidx].hw_value; | 
|  | if (ath10k_mac_bitrate_is_cck(bitrate)) | 
|  | preamble = WMI_RATE_PREAMBLE_CCK; | 
|  | else | 
|  | preamble = WMI_RATE_PREAMBLE_OFDM; | 
|  |  | 
|  | rate = ATH10K_HW_RATECODE(hw_value, 0, preamble); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac vdev %d mcast_rate %x\n", | 
|  | arvif->vdev_id, rate); | 
|  |  | 
|  | vdev_param = ar->wmi.vdev_param->mcast_data_rate; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, | 
|  | vdev_param, rate); | 
|  | if (ret) | 
|  | ath10k_warn(ar, | 
|  | "failed to set mcast rate on vdev %i: %d\n", | 
|  | arvif->vdev_id,  ret); | 
|  |  | 
|  | vdev_param = ar->wmi.vdev_param->bcast_data_rate; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, | 
|  | vdev_param, rate); | 
|  | if (ret) | 
|  | ath10k_warn(ar, | 
|  | "failed to set bcast rate on vdev %i: %d\n", | 
|  | arvif->vdev_id,  ret); | 
|  | } | 
|  |  | 
|  | if (changed & BSS_CHANGED_BASIC_RATES) { | 
|  | if (ath10k_mac_vif_chan(vif, &def)) { | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return; | 
|  | } | 
|  |  | 
|  | sband = ar->hw->wiphy->bands[def.chan->band]; | 
|  | basic_rate_idx = ffs(vif->bss_conf.basic_rates) - 1; | 
|  | bitrate = sband->bitrates[basic_rate_idx].bitrate; | 
|  |  | 
|  | hw_rate_code = ath10k_mac_get_rate_hw_value(bitrate); | 
|  | if (hw_rate_code < 0) { | 
|  | ath10k_warn(ar, "bitrate not supported %d\n", bitrate); | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return; | 
|  | } | 
|  |  | 
|  | vdev_param = ar->wmi.vdev_param->mgmt_rate; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | 
|  | hw_rate_code); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to set mgmt tx rate %d\n", ret); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_op_set_coverage_class(struct ieee80211_hw *hw, s16 value) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  |  | 
|  | /* This function should never be called if setting the coverage class | 
|  | * is not supported on this hardware. | 
|  | */ | 
|  | if (!ar->hw_params.hw_ops->set_coverage_class) { | 
|  | WARN_ON_ONCE(1); | 
|  | return; | 
|  | } | 
|  | ar->hw_params.hw_ops->set_coverage_class(ar, value); | 
|  | } | 
|  |  | 
|  | struct ath10k_mac_tdls_iter_data { | 
|  | u32 num_tdls_stations; | 
|  | struct ieee80211_vif *curr_vif; | 
|  | }; | 
|  |  | 
|  | static void ath10k_mac_tdls_vif_stations_count_iter(void *data, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct ath10k_mac_tdls_iter_data *iter_data = data; | 
|  | struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv; | 
|  | struct ieee80211_vif *sta_vif = arsta->arvif->vif; | 
|  |  | 
|  | if (sta->tdls && sta_vif == iter_data->curr_vif) | 
|  | iter_data->num_tdls_stations++; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_tdls_vif_stations_count(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath10k_mac_tdls_iter_data data = {}; | 
|  |  | 
|  | data.curr_vif = vif; | 
|  |  | 
|  | ieee80211_iterate_stations_atomic(hw, | 
|  | ath10k_mac_tdls_vif_stations_count_iter, | 
|  | &data); | 
|  | return data.num_tdls_stations; | 
|  | } | 
|  |  | 
|  | static int ath10k_hw_scan(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_scan_request *hw_req) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct cfg80211_scan_request *req = &hw_req->req; | 
|  | struct wmi_start_scan_arg arg; | 
|  | int ret = 0; | 
|  | int i; | 
|  | u32 scan_timeout; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | if (ath10k_mac_tdls_vif_stations_count(hw, vif) > 0) { | 
|  | ret = -EBUSY; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | switch (ar->scan.state) { | 
|  | case ATH10K_SCAN_IDLE: | 
|  | reinit_completion(&ar->scan.started); | 
|  | reinit_completion(&ar->scan.completed); | 
|  | ar->scan.state = ATH10K_SCAN_STARTING; | 
|  | ar->scan.is_roc = false; | 
|  | ar->scan.vdev_id = arvif->vdev_id; | 
|  | ret = 0; | 
|  | break; | 
|  | case ATH10K_SCAN_STARTING: | 
|  | case ATH10K_SCAN_RUNNING: | 
|  | case ATH10K_SCAN_ABORTING: | 
|  | ret = -EBUSY; | 
|  | break; | 
|  | } | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | if (ret) | 
|  | goto exit; | 
|  |  | 
|  | memset(&arg, 0, sizeof(arg)); | 
|  | ath10k_wmi_start_scan_init(ar, &arg); | 
|  | arg.vdev_id = arvif->vdev_id; | 
|  | arg.scan_id = ATH10K_SCAN_ID; | 
|  |  | 
|  | if (req->ie_len) { | 
|  | arg.ie_len = req->ie_len; | 
|  | memcpy(arg.ie, req->ie, arg.ie_len); | 
|  | } | 
|  |  | 
|  | if (req->n_ssids) { | 
|  | arg.n_ssids = req->n_ssids; | 
|  | for (i = 0; i < arg.n_ssids; i++) { | 
|  | arg.ssids[i].len  = req->ssids[i].ssid_len; | 
|  | arg.ssids[i].ssid = req->ssids[i].ssid; | 
|  | } | 
|  | } else { | 
|  | arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE; | 
|  | } | 
|  |  | 
|  | if (req->flags & NL80211_SCAN_FLAG_RANDOM_ADDR) { | 
|  | arg.scan_ctrl_flags |=  WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ; | 
|  | ether_addr_copy(arg.mac_addr.addr, req->mac_addr); | 
|  | ether_addr_copy(arg.mac_mask.addr, req->mac_addr_mask); | 
|  | } | 
|  |  | 
|  | if (req->n_channels) { | 
|  | arg.n_channels = req->n_channels; | 
|  | for (i = 0; i < arg.n_channels; i++) | 
|  | arg.channels[i] = req->channels[i]->center_freq; | 
|  | } | 
|  |  | 
|  | /* if duration is set, default dwell times will be overwritten */ | 
|  | if (req->duration) { | 
|  | arg.dwell_time_active = req->duration; | 
|  | arg.dwell_time_passive = req->duration; | 
|  | arg.burst_duration_ms = req->duration; | 
|  |  | 
|  | scan_timeout = min_t(u32, arg.max_rest_time * | 
|  | (arg.n_channels - 1) + (req->duration + | 
|  | ATH10K_SCAN_CHANNEL_SWITCH_WMI_EVT_OVERHEAD) * | 
|  | arg.n_channels, arg.max_scan_time + 200); | 
|  |  | 
|  | } else { | 
|  | /* Add a 200ms margin to account for event/command processing */ | 
|  | scan_timeout = arg.max_scan_time + 200; | 
|  | } | 
|  |  | 
|  | ret = ath10k_start_scan(ar, &arg); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to start hw scan: %d\n", ret); | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | ar->scan.state = ATH10K_SCAN_IDLE; | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  | } | 
|  |  | 
|  | ieee80211_queue_delayed_work(ar->hw, &ar->scan.timeout, | 
|  | msecs_to_jiffies(scan_timeout)); | 
|  |  | 
|  | exit: | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void ath10k_cancel_hw_scan(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  | ath10k_scan_abort(ar); | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  |  | 
|  | cancel_delayed_work_sync(&ar->scan.timeout); | 
|  | } | 
|  |  | 
|  | static void ath10k_set_key_h_def_keyidx(struct ath10k *ar, | 
|  | struct ath10k_vif *arvif, | 
|  | enum set_key_cmd cmd, | 
|  | struct ieee80211_key_conf *key) | 
|  | { | 
|  | u32 vdev_param = arvif->ar->wmi.vdev_param->def_keyid; | 
|  | int ret; | 
|  |  | 
|  | /* 10.1 firmware branch requires default key index to be set to group | 
|  | * key index after installing it. Otherwise FW/HW Txes corrupted | 
|  | * frames with multi-vif APs. This is not required for main firmware | 
|  | * branch (e.g. 636). | 
|  | * | 
|  | * This is also needed for 636 fw for IBSS-RSN to work more reliably. | 
|  | * | 
|  | * FIXME: It remains unknown if this is required for multi-vif STA | 
|  | * interfaces on 10.1. | 
|  | */ | 
|  |  | 
|  | if (arvif->vdev_type != WMI_VDEV_TYPE_AP && | 
|  | arvif->vdev_type != WMI_VDEV_TYPE_IBSS) | 
|  | return; | 
|  |  | 
|  | if (key->cipher == WLAN_CIPHER_SUITE_WEP40) | 
|  | return; | 
|  |  | 
|  | if (key->cipher == WLAN_CIPHER_SUITE_WEP104) | 
|  | return; | 
|  |  | 
|  | if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) | 
|  | return; | 
|  |  | 
|  | if (cmd != SET_KEY) | 
|  | return; | 
|  |  | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, | 
|  | key->keyidx); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to set vdev %i group key as default key: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | } | 
|  |  | 
|  | static int ath10k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, | 
|  | struct ieee80211_vif *vif, struct ieee80211_sta *sta, | 
|  | struct ieee80211_key_conf *key) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct ath10k_peer *peer; | 
|  | const u8 *peer_addr; | 
|  | bool is_wep = key->cipher == WLAN_CIPHER_SUITE_WEP40 || | 
|  | key->cipher == WLAN_CIPHER_SUITE_WEP104; | 
|  | int ret = 0; | 
|  | int ret2; | 
|  | u32 flags = 0; | 
|  | u32 flags2; | 
|  |  | 
|  | /* this one needs to be done in software */ | 
|  | if (key->cipher == WLAN_CIPHER_SUITE_AES_CMAC || | 
|  | key->cipher == WLAN_CIPHER_SUITE_BIP_GMAC_128 || | 
|  | key->cipher == WLAN_CIPHER_SUITE_BIP_GMAC_256 || | 
|  | key->cipher == WLAN_CIPHER_SUITE_BIP_CMAC_256) | 
|  | return 1; | 
|  |  | 
|  | if (arvif->nohwcrypt) | 
|  | return 1; | 
|  |  | 
|  | if (key->keyidx > WMI_MAX_KEY_INDEX) | 
|  | return -ENOSPC; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | if (sta) | 
|  | peer_addr = sta->addr; | 
|  | else if (arvif->vdev_type == WMI_VDEV_TYPE_STA) | 
|  | peer_addr = vif->bss_conf.bssid; | 
|  | else | 
|  | peer_addr = vif->addr; | 
|  |  | 
|  | key->hw_key_idx = key->keyidx; | 
|  |  | 
|  | if (is_wep) { | 
|  | if (cmd == SET_KEY) | 
|  | arvif->wep_keys[key->keyidx] = key; | 
|  | else | 
|  | arvif->wep_keys[key->keyidx] = NULL; | 
|  | } | 
|  |  | 
|  | /* the peer should not disappear in mid-way (unless FW goes awry) since | 
|  | * we already hold conf_mutex. we just make sure its there now. | 
|  | */ | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | if (!peer) { | 
|  | if (cmd == SET_KEY) { | 
|  | ath10k_warn(ar, "failed to install key for non-existent peer %pM\n", | 
|  | peer_addr); | 
|  | ret = -EOPNOTSUPP; | 
|  | goto exit; | 
|  | } else { | 
|  | /* if the peer doesn't exist there is no key to disable anymore */ | 
|  | goto exit; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (key->flags & IEEE80211_KEY_FLAG_PAIRWISE) | 
|  | flags |= WMI_KEY_PAIRWISE; | 
|  | else | 
|  | flags |= WMI_KEY_GROUP; | 
|  |  | 
|  | if (is_wep) { | 
|  | if (cmd == DISABLE_KEY) | 
|  | ath10k_clear_vdev_key(arvif, key); | 
|  |  | 
|  | /* When WEP keys are uploaded it's possible that there are | 
|  | * stations associated already (e.g. when merging) without any | 
|  | * keys. Static WEP needs an explicit per-peer key upload. | 
|  | */ | 
|  | if (vif->type == NL80211_IFTYPE_ADHOC && | 
|  | cmd == SET_KEY) | 
|  | ath10k_mac_vif_update_wep_key(arvif, key); | 
|  |  | 
|  | /* 802.1x never sets the def_wep_key_idx so each set_key() | 
|  | * call changes default tx key. | 
|  | * | 
|  | * Static WEP sets def_wep_key_idx via .set_default_unicast_key | 
|  | * after first set_key(). | 
|  | */ | 
|  | if (cmd == SET_KEY && arvif->def_wep_key_idx == -1) | 
|  | flags |= WMI_KEY_TX_USAGE; | 
|  | } | 
|  |  | 
|  | ret = ath10k_install_key(arvif, key, cmd, peer_addr, flags); | 
|  | if (ret) { | 
|  | WARN_ON(ret > 0); | 
|  | ath10k_warn(ar, "failed to install key for vdev %i peer %pM: %d\n", | 
|  | arvif->vdev_id, peer_addr, ret); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | /* mac80211 sets static WEP keys as groupwise while firmware requires | 
|  | * them to be installed twice as both pairwise and groupwise. | 
|  | */ | 
|  | if (is_wep && !sta && vif->type == NL80211_IFTYPE_STATION) { | 
|  | flags2 = flags; | 
|  | flags2 &= ~WMI_KEY_GROUP; | 
|  | flags2 |= WMI_KEY_PAIRWISE; | 
|  |  | 
|  | ret = ath10k_install_key(arvif, key, cmd, peer_addr, flags2); | 
|  | if (ret) { | 
|  | WARN_ON(ret > 0); | 
|  | ath10k_warn(ar, "failed to install (ucast) key for vdev %i peer %pM: %d\n", | 
|  | arvif->vdev_id, peer_addr, ret); | 
|  | ret2 = ath10k_install_key(arvif, key, DISABLE_KEY, | 
|  | peer_addr, flags); | 
|  | if (ret2) { | 
|  | WARN_ON(ret2 > 0); | 
|  | ath10k_warn(ar, "failed to disable (mcast) key for vdev %i peer %pM: %d\n", | 
|  | arvif->vdev_id, peer_addr, ret2); | 
|  | } | 
|  | goto exit; | 
|  | } | 
|  | } | 
|  |  | 
|  | ath10k_set_key_h_def_keyidx(ar, arvif, cmd, key); | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | peer = ath10k_peer_find(ar, arvif->vdev_id, peer_addr); | 
|  | if (peer && cmd == SET_KEY) | 
|  | peer->keys[key->keyidx] = key; | 
|  | else if (peer && cmd == DISABLE_KEY) | 
|  | peer->keys[key->keyidx] = NULL; | 
|  | else if (peer == NULL) | 
|  | /* impossible unless FW goes crazy */ | 
|  | ath10k_warn(ar, "Peer %pM disappeared!\n", peer_addr); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | if (sta && sta->tdls) | 
|  | ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, | 
|  | WMI_PEER_AUTHORIZE, 1); | 
|  |  | 
|  | exit: | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void ath10k_set_default_unicast_key(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | int keyidx) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&arvif->ar->conf_mutex); | 
|  |  | 
|  | if (arvif->ar->state != ATH10K_STATE_ON) | 
|  | goto unlock; | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d set keyidx %d\n", | 
|  | arvif->vdev_id, keyidx); | 
|  |  | 
|  | ret = ath10k_wmi_vdev_set_param(arvif->ar, | 
|  | arvif->vdev_id, | 
|  | arvif->ar->wmi.vdev_param->def_keyid, | 
|  | keyidx); | 
|  |  | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to update wep key index for vdev %d: %d\n", | 
|  | arvif->vdev_id, | 
|  | ret); | 
|  | goto unlock; | 
|  | } | 
|  |  | 
|  | arvif->def_wep_key_idx = keyidx; | 
|  |  | 
|  | unlock: | 
|  | mutex_unlock(&arvif->ar->conf_mutex); | 
|  | } | 
|  |  | 
|  | static void ath10k_sta_rc_update_wk(struct work_struct *wk) | 
|  | { | 
|  | struct ath10k *ar; | 
|  | struct ath10k_vif *arvif; | 
|  | struct ath10k_sta *arsta; | 
|  | struct ieee80211_sta *sta; | 
|  | struct cfg80211_chan_def def; | 
|  | enum nl80211_band band; | 
|  | const u8 *ht_mcs_mask; | 
|  | const u16 *vht_mcs_mask; | 
|  | u32 changed, bw, nss, smps; | 
|  | int err; | 
|  |  | 
|  | arsta = container_of(wk, struct ath10k_sta, update_wk); | 
|  | sta = container_of((void *)arsta, struct ieee80211_sta, drv_priv); | 
|  | arvif = arsta->arvif; | 
|  | ar = arvif->ar; | 
|  |  | 
|  | if (WARN_ON(ath10k_mac_vif_chan(arvif->vif, &def))) | 
|  | return; | 
|  |  | 
|  | band = def.chan->band; | 
|  | ht_mcs_mask = arvif->bitrate_mask.control[band].ht_mcs; | 
|  | vht_mcs_mask = arvif->bitrate_mask.control[band].vht_mcs; | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  |  | 
|  | changed = arsta->changed; | 
|  | arsta->changed = 0; | 
|  |  | 
|  | bw = arsta->bw; | 
|  | nss = arsta->nss; | 
|  | smps = arsta->smps; | 
|  |  | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | nss = max_t(u32, 1, nss); | 
|  | nss = min(nss, max(ath10k_mac_max_ht_nss(ht_mcs_mask), | 
|  | ath10k_mac_max_vht_nss(vht_mcs_mask))); | 
|  |  | 
|  | if (changed & IEEE80211_RC_BW_CHANGED) { | 
|  | enum wmi_phy_mode mode; | 
|  |  | 
|  | mode = chan_to_phymode(&def); | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM peer bw %d phymode %d\n", | 
|  | sta->addr, bw, mode); | 
|  |  | 
|  | err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, | 
|  | WMI_PEER_PHYMODE, mode); | 
|  | if (err) { | 
|  | ath10k_warn(ar, "failed to update STA %pM peer phymode %d: %d\n", | 
|  | sta->addr, mode, err); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, | 
|  | WMI_PEER_CHAN_WIDTH, bw); | 
|  | if (err) | 
|  | ath10k_warn(ar, "failed to update STA %pM peer bw %d: %d\n", | 
|  | sta->addr, bw, err); | 
|  | } | 
|  |  | 
|  | if (changed & IEEE80211_RC_NSS_CHANGED) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM nss %d\n", | 
|  | sta->addr, nss); | 
|  |  | 
|  | err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, | 
|  | WMI_PEER_NSS, nss); | 
|  | if (err) | 
|  | ath10k_warn(ar, "failed to update STA %pM nss %d: %d\n", | 
|  | sta->addr, nss, err); | 
|  | } | 
|  |  | 
|  | if (changed & IEEE80211_RC_SMPS_CHANGED) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM smps %d\n", | 
|  | sta->addr, smps); | 
|  |  | 
|  | err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, | 
|  | WMI_PEER_SMPS_STATE, smps); | 
|  | if (err) | 
|  | ath10k_warn(ar, "failed to update STA %pM smps %d: %d\n", | 
|  | sta->addr, smps, err); | 
|  | } | 
|  |  | 
|  | if (changed & IEEE80211_RC_SUPP_RATES_CHANGED) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac update sta %pM supp rates\n", | 
|  | sta->addr); | 
|  |  | 
|  | err = ath10k_station_assoc(ar, arvif->vif, sta, true); | 
|  | if (err) | 
|  | ath10k_warn(ar, "failed to reassociate station: %pM\n", | 
|  | sta->addr); | 
|  | } | 
|  |  | 
|  | exit: | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_inc_num_stations(struct ath10k_vif *arvif, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | if (arvif->vdev_type == WMI_VDEV_TYPE_STA && !sta->tdls) | 
|  | return 0; | 
|  |  | 
|  | if (ar->num_stations >= ar->max_num_stations) | 
|  | return -ENOBUFS; | 
|  |  | 
|  | ar->num_stations++; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_dec_num_stations(struct ath10k_vif *arvif, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | if (arvif->vdev_type == WMI_VDEV_TYPE_STA && !sta->tdls) | 
|  | return; | 
|  |  | 
|  | ar->num_stations--; | 
|  | } | 
|  |  | 
|  | static int ath10k_sta_set_txpwr(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | int ret = 0; | 
|  | s16 txpwr; | 
|  |  | 
|  | if (sta->txpwr.type == NL80211_TX_POWER_AUTOMATIC) { | 
|  | txpwr = 0; | 
|  | } else { | 
|  | txpwr = sta->txpwr.power; | 
|  | if (!txpwr) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (txpwr > ATH10K_TX_POWER_MAX_VAL || txpwr < ATH10K_TX_POWER_MIN_VAL) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | ret = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, | 
|  | WMI_PEER_USE_FIXED_PWR, txpwr); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set tx power for station ret: %d\n", | 
|  | ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ath10k_sta_state(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | enum ieee80211_sta_state old_state, | 
|  | enum ieee80211_sta_state new_state) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv; | 
|  | struct ath10k_peer *peer; | 
|  | int ret = 0; | 
|  | int i; | 
|  |  | 
|  | if (old_state == IEEE80211_STA_NOTEXIST && | 
|  | new_state == IEEE80211_STA_NONE) { | 
|  | memset(arsta, 0, sizeof(*arsta)); | 
|  | arsta->arvif = arvif; | 
|  | arsta->peer_ps_state = WMI_PEER_PS_STATE_DISABLED; | 
|  | INIT_WORK(&arsta->update_wk, ath10k_sta_rc_update_wk); | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(sta->txq); i++) | 
|  | ath10k_mac_txq_init(sta->txq[i]); | 
|  | } | 
|  |  | 
|  | /* cancel must be done outside the mutex to avoid deadlock */ | 
|  | if ((old_state == IEEE80211_STA_NONE && | 
|  | new_state == IEEE80211_STA_NOTEXIST)) | 
|  | cancel_work_sync(&arsta->update_wk); | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | if (old_state == IEEE80211_STA_NOTEXIST && | 
|  | new_state == IEEE80211_STA_NONE) { | 
|  | /* | 
|  | * New station addition. | 
|  | */ | 
|  | enum wmi_peer_type peer_type = WMI_PEER_TYPE_DEFAULT; | 
|  | u32 num_tdls_stations; | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac vdev %d peer create %pM (new sta) sta %d / %d peer %d / %d\n", | 
|  | arvif->vdev_id, sta->addr, | 
|  | ar->num_stations + 1, ar->max_num_stations, | 
|  | ar->num_peers + 1, ar->max_num_peers); | 
|  |  | 
|  | num_tdls_stations = ath10k_mac_tdls_vif_stations_count(hw, vif); | 
|  |  | 
|  | if (sta->tdls) { | 
|  | if (num_tdls_stations >= ar->max_num_tdls_vdevs) { | 
|  | ath10k_warn(ar, "vdev %i exceeded maximum number of tdls vdevs %i\n", | 
|  | arvif->vdev_id, | 
|  | ar->max_num_tdls_vdevs); | 
|  | ret = -ELNRNG; | 
|  | goto exit; | 
|  | } | 
|  | peer_type = WMI_PEER_TYPE_TDLS; | 
|  | } | 
|  |  | 
|  | ret = ath10k_mac_inc_num_stations(arvif, sta); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "refusing to associate station: too many connected already (%d)\n", | 
|  | ar->max_num_stations); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if (ath10k_debug_is_extd_tx_stats_enabled(ar)) { | 
|  | arsta->tx_stats = kzalloc(sizeof(*arsta->tx_stats), | 
|  | GFP_KERNEL); | 
|  | if (!arsta->tx_stats) { | 
|  | ret = -ENOMEM; | 
|  | goto exit; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = ath10k_peer_create(ar, vif, sta, arvif->vdev_id, | 
|  | sta->addr, peer_type); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to add peer %pM for vdev %d when adding a new sta: %i\n", | 
|  | sta->addr, arvif->vdev_id, ret); | 
|  | ath10k_mac_dec_num_stations(arvif, sta); | 
|  | kfree(arsta->tx_stats); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  |  | 
|  | peer = ath10k_peer_find(ar, arvif->vdev_id, sta->addr); | 
|  | if (!peer) { | 
|  | ath10k_warn(ar, "failed to lookup peer %pM on vdev %i\n", | 
|  | vif->addr, arvif->vdev_id); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  | ath10k_peer_delete(ar, arvif->vdev_id, sta->addr); | 
|  | ath10k_mac_dec_num_stations(arvif, sta); | 
|  | kfree(arsta->tx_stats); | 
|  | ret = -ENOENT; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | arsta->peer_id = find_first_bit(peer->peer_ids, | 
|  | ATH10K_MAX_NUM_PEER_IDS); | 
|  |  | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | if (!sta->tdls) | 
|  | goto exit; | 
|  |  | 
|  | ret = ath10k_wmi_update_fw_tdls_state(ar, arvif->vdev_id, | 
|  | WMI_TDLS_ENABLE_ACTIVE); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to update fw tdls state on vdev %i: %i\n", | 
|  | arvif->vdev_id, ret); | 
|  | ath10k_peer_delete(ar, arvif->vdev_id, | 
|  | sta->addr); | 
|  | ath10k_mac_dec_num_stations(arvif, sta); | 
|  | kfree(arsta->tx_stats); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id, sta, | 
|  | WMI_TDLS_PEER_STATE_PEERING); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, | 
|  | "failed to update tdls peer %pM for vdev %d when adding a new sta: %i\n", | 
|  | sta->addr, arvif->vdev_id, ret); | 
|  | ath10k_peer_delete(ar, arvif->vdev_id, sta->addr); | 
|  | ath10k_mac_dec_num_stations(arvif, sta); | 
|  | kfree(arsta->tx_stats); | 
|  |  | 
|  | if (num_tdls_stations != 0) | 
|  | goto exit; | 
|  | ath10k_wmi_update_fw_tdls_state(ar, arvif->vdev_id, | 
|  | WMI_TDLS_DISABLE); | 
|  | } | 
|  | } else if ((old_state == IEEE80211_STA_NONE && | 
|  | new_state == IEEE80211_STA_NOTEXIST)) { | 
|  | /* | 
|  | * Existing station deletion. | 
|  | */ | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac vdev %d peer delete %pM sta %pK (sta gone)\n", | 
|  | arvif->vdev_id, sta->addr, sta); | 
|  |  | 
|  | if (sta->tdls) { | 
|  | ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id, | 
|  | sta, | 
|  | WMI_TDLS_PEER_STATE_TEARDOWN); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to update tdls peer state for %pM state %d: %i\n", | 
|  | sta->addr, | 
|  | WMI_TDLS_PEER_STATE_TEARDOWN, ret); | 
|  | } | 
|  |  | 
|  | ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to delete peer %pM for vdev %d: %i\n", | 
|  | sta->addr, arvif->vdev_id, ret); | 
|  |  | 
|  | ath10k_mac_dec_num_stations(arvif, sta); | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | for (i = 0; i < ARRAY_SIZE(ar->peer_map); i++) { | 
|  | peer = ar->peer_map[i]; | 
|  | if (!peer) | 
|  | continue; | 
|  |  | 
|  | if (peer->sta == sta) { | 
|  | ath10k_warn(ar, "found sta peer %pM (ptr %pK id %d) entry on vdev %i after it was supposedly removed\n", | 
|  | sta->addr, peer, i, arvif->vdev_id); | 
|  | peer->sta = NULL; | 
|  |  | 
|  | /* Clean up the peer object as well since we | 
|  | * must have failed to do this above. | 
|  | */ | 
|  | list_del(&peer->list); | 
|  | ar->peer_map[i] = NULL; | 
|  | kfree(peer); | 
|  | ar->num_peers--; | 
|  | } | 
|  | } | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | if (ath10k_debug_is_extd_tx_stats_enabled(ar)) { | 
|  | kfree(arsta->tx_stats); | 
|  | arsta->tx_stats = NULL; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(sta->txq); i++) | 
|  | ath10k_mac_txq_unref(ar, sta->txq[i]); | 
|  |  | 
|  | if (!sta->tdls) | 
|  | goto exit; | 
|  |  | 
|  | if (ath10k_mac_tdls_vif_stations_count(hw, vif)) | 
|  | goto exit; | 
|  |  | 
|  | /* This was the last tdls peer in current vif */ | 
|  | ret = ath10k_wmi_update_fw_tdls_state(ar, arvif->vdev_id, | 
|  | WMI_TDLS_DISABLE); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to update fw tdls state on vdev %i: %i\n", | 
|  | arvif->vdev_id, ret); | 
|  | } | 
|  | } else if (old_state == IEEE80211_STA_AUTH && | 
|  | new_state == IEEE80211_STA_ASSOC && | 
|  | (vif->type == NL80211_IFTYPE_AP || | 
|  | vif->type == NL80211_IFTYPE_MESH_POINT || | 
|  | vif->type == NL80211_IFTYPE_ADHOC)) { | 
|  | /* | 
|  | * New association. | 
|  | */ | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac sta %pM associated\n", | 
|  | sta->addr); | 
|  |  | 
|  | ret = ath10k_station_assoc(ar, vif, sta, false); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to associate station %pM for vdev %i: %i\n", | 
|  | sta->addr, arvif->vdev_id, ret); | 
|  | } else if (old_state == IEEE80211_STA_ASSOC && | 
|  | new_state == IEEE80211_STA_AUTHORIZED && | 
|  | sta->tdls) { | 
|  | /* | 
|  | * Tdls station authorized. | 
|  | */ | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac tdls sta %pM authorized\n", | 
|  | sta->addr); | 
|  |  | 
|  | ret = ath10k_station_assoc(ar, vif, sta, false); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to associate tdls station %pM for vdev %i: %i\n", | 
|  | sta->addr, arvif->vdev_id, ret); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | ret = ath10k_mac_tdls_peer_update(ar, arvif->vdev_id, sta, | 
|  | WMI_TDLS_PEER_STATE_CONNECTED); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to update tdls peer %pM for vdev %i: %i\n", | 
|  | sta->addr, arvif->vdev_id, ret); | 
|  | } else if (old_state == IEEE80211_STA_ASSOC && | 
|  | new_state == IEEE80211_STA_AUTH && | 
|  | (vif->type == NL80211_IFTYPE_AP || | 
|  | vif->type == NL80211_IFTYPE_MESH_POINT || | 
|  | vif->type == NL80211_IFTYPE_ADHOC)) { | 
|  | /* | 
|  | * Disassociation. | 
|  | */ | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac sta %pM disassociated\n", | 
|  | sta->addr); | 
|  |  | 
|  | ret = ath10k_station_disassoc(ar, vif, sta); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to disassociate station: %pM vdev %i: %i\n", | 
|  | sta->addr, arvif->vdev_id, ret); | 
|  | } | 
|  | exit: | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ath10k_conf_tx_uapsd(struct ath10k *ar, struct ieee80211_vif *vif, | 
|  | u16 ac, bool enable) | 
|  | { | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct wmi_sta_uapsd_auto_trig_arg arg = {}; | 
|  | u32 prio = 0, acc = 0; | 
|  | u32 value = 0; | 
|  | int ret = 0; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | if (arvif->vdev_type != WMI_VDEV_TYPE_STA) | 
|  | return 0; | 
|  |  | 
|  | switch (ac) { | 
|  | case IEEE80211_AC_VO: | 
|  | value = WMI_STA_PS_UAPSD_AC3_DELIVERY_EN | | 
|  | WMI_STA_PS_UAPSD_AC3_TRIGGER_EN; | 
|  | prio = 7; | 
|  | acc = 3; | 
|  | break; | 
|  | case IEEE80211_AC_VI: | 
|  | value = WMI_STA_PS_UAPSD_AC2_DELIVERY_EN | | 
|  | WMI_STA_PS_UAPSD_AC2_TRIGGER_EN; | 
|  | prio = 5; | 
|  | acc = 2; | 
|  | break; | 
|  | case IEEE80211_AC_BE: | 
|  | value = WMI_STA_PS_UAPSD_AC1_DELIVERY_EN | | 
|  | WMI_STA_PS_UAPSD_AC1_TRIGGER_EN; | 
|  | prio = 2; | 
|  | acc = 1; | 
|  | break; | 
|  | case IEEE80211_AC_BK: | 
|  | value = WMI_STA_PS_UAPSD_AC0_DELIVERY_EN | | 
|  | WMI_STA_PS_UAPSD_AC0_TRIGGER_EN; | 
|  | prio = 0; | 
|  | acc = 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (enable) | 
|  | arvif->u.sta.uapsd |= value; | 
|  | else | 
|  | arvif->u.sta.uapsd &= ~value; | 
|  |  | 
|  | ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, | 
|  | WMI_STA_PS_PARAM_UAPSD, | 
|  | arvif->u.sta.uapsd); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set uapsd params: %d\n", ret); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if (arvif->u.sta.uapsd) | 
|  | value = WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD; | 
|  | else | 
|  | value = WMI_STA_PS_RX_WAKE_POLICY_WAKE; | 
|  |  | 
|  | ret = ath10k_wmi_set_sta_ps_param(ar, arvif->vdev_id, | 
|  | WMI_STA_PS_PARAM_RX_WAKE_POLICY, | 
|  | value); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to set rx wake param: %d\n", ret); | 
|  |  | 
|  | ret = ath10k_mac_vif_recalc_ps_wake_threshold(arvif); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to recalc ps wake threshold on vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = ath10k_mac_vif_recalc_ps_poll_count(arvif); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to recalc ps poll count on vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, ar->wmi.svc_map) || | 
|  | test_bit(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, ar->wmi.svc_map)) { | 
|  | /* Only userspace can make an educated decision when to send | 
|  | * trigger frame. The following effectively disables u-UAPSD | 
|  | * autotrigger in firmware (which is enabled by default | 
|  | * provided the autotrigger service is available). | 
|  | */ | 
|  |  | 
|  | arg.wmm_ac = acc; | 
|  | arg.user_priority = prio; | 
|  | arg.service_interval = 0; | 
|  | arg.suspend_interval = WMI_STA_UAPSD_MAX_INTERVAL_MSEC; | 
|  | arg.delay_interval = WMI_STA_UAPSD_MAX_INTERVAL_MSEC; | 
|  |  | 
|  | ret = ath10k_wmi_vdev_sta_uapsd(ar, arvif->vdev_id, | 
|  | arvif->bssid, &arg, 1); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set uapsd auto trigger %d\n", | 
|  | ret); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | exit: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ath10k_conf_tx(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, u16 ac, | 
|  | const struct ieee80211_tx_queue_params *params) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct wmi_wmm_params_arg *p = NULL; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | switch (ac) { | 
|  | case IEEE80211_AC_VO: | 
|  | p = &arvif->wmm_params.ac_vo; | 
|  | break; | 
|  | case IEEE80211_AC_VI: | 
|  | p = &arvif->wmm_params.ac_vi; | 
|  | break; | 
|  | case IEEE80211_AC_BE: | 
|  | p = &arvif->wmm_params.ac_be; | 
|  | break; | 
|  | case IEEE80211_AC_BK: | 
|  | p = &arvif->wmm_params.ac_bk; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (WARN_ON(!p)) { | 
|  | ret = -EINVAL; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | p->cwmin = params->cw_min; | 
|  | p->cwmax = params->cw_max; | 
|  | p->aifs = params->aifs; | 
|  |  | 
|  | /* | 
|  | * The channel time duration programmed in the HW is in absolute | 
|  | * microseconds, while mac80211 gives the txop in units of | 
|  | * 32 microseconds. | 
|  | */ | 
|  | p->txop = params->txop * 32; | 
|  |  | 
|  | if (ar->wmi.ops->gen_vdev_wmm_conf) { | 
|  | ret = ath10k_wmi_vdev_wmm_conf(ar, arvif->vdev_id, | 
|  | &arvif->wmm_params); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set vdev wmm params on vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | goto exit; | 
|  | } | 
|  | } else { | 
|  | /* This won't work well with multi-interface cases but it's | 
|  | * better than nothing. | 
|  | */ | 
|  | ret = ath10k_wmi_pdev_set_wmm_params(ar, &arvif->wmm_params); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set wmm params: %d\n", ret); | 
|  | goto exit; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = ath10k_conf_tx_uapsd(ar, vif, ac, params->uapsd); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to set sta uapsd: %d\n", ret); | 
|  |  | 
|  | exit: | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | #define ATH10K_ROC_TIMEOUT_HZ (2 * HZ) | 
|  |  | 
|  | static int ath10k_remain_on_channel(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_channel *chan, | 
|  | int duration, | 
|  | enum ieee80211_roc_type type) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct wmi_start_scan_arg arg; | 
|  | int ret = 0; | 
|  | u32 scan_time_msec; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | if (ath10k_mac_tdls_vif_stations_count(hw, vif) > 0) { | 
|  | ret = -EBUSY; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | switch (ar->scan.state) { | 
|  | case ATH10K_SCAN_IDLE: | 
|  | reinit_completion(&ar->scan.started); | 
|  | reinit_completion(&ar->scan.completed); | 
|  | reinit_completion(&ar->scan.on_channel); | 
|  | ar->scan.state = ATH10K_SCAN_STARTING; | 
|  | ar->scan.is_roc = true; | 
|  | ar->scan.vdev_id = arvif->vdev_id; | 
|  | ar->scan.roc_freq = chan->center_freq; | 
|  | ar->scan.roc_notify = true; | 
|  | ret = 0; | 
|  | break; | 
|  | case ATH10K_SCAN_STARTING: | 
|  | case ATH10K_SCAN_RUNNING: | 
|  | case ATH10K_SCAN_ABORTING: | 
|  | ret = -EBUSY; | 
|  | break; | 
|  | } | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | if (ret) | 
|  | goto exit; | 
|  |  | 
|  | scan_time_msec = ar->hw->wiphy->max_remain_on_channel_duration * 2; | 
|  |  | 
|  | memset(&arg, 0, sizeof(arg)); | 
|  | ath10k_wmi_start_scan_init(ar, &arg); | 
|  | arg.vdev_id = arvif->vdev_id; | 
|  | arg.scan_id = ATH10K_SCAN_ID; | 
|  | arg.n_channels = 1; | 
|  | arg.channels[0] = chan->center_freq; | 
|  | arg.dwell_time_active = scan_time_msec; | 
|  | arg.dwell_time_passive = scan_time_msec; | 
|  | arg.max_scan_time = scan_time_msec; | 
|  | arg.scan_ctrl_flags |= WMI_SCAN_FLAG_PASSIVE; | 
|  | arg.scan_ctrl_flags |= WMI_SCAN_FILTER_PROBE_REQ; | 
|  | arg.burst_duration_ms = duration; | 
|  |  | 
|  | ret = ath10k_start_scan(ar, &arg); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to start roc scan: %d\n", ret); | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | ar->scan.state = ATH10K_SCAN_IDLE; | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | ret = wait_for_completion_timeout(&ar->scan.on_channel, 3 * HZ); | 
|  | if (ret == 0) { | 
|  | ath10k_warn(ar, "failed to switch to channel for roc scan\n"); | 
|  |  | 
|  | ret = ath10k_scan_stop(ar); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to stop scan: %d\n", ret); | 
|  |  | 
|  | ret = -ETIMEDOUT; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | ieee80211_queue_delayed_work(ar->hw, &ar->scan.timeout, | 
|  | msecs_to_jiffies(duration)); | 
|  |  | 
|  | ret = 0; | 
|  | exit: | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ath10k_cancel_remain_on_channel(struct ieee80211_hw *hw) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | ar->scan.roc_notify = false; | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | ath10k_scan_abort(ar); | 
|  |  | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  |  | 
|  | cancel_delayed_work_sync(&ar->scan.timeout); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Both RTS and Fragmentation threshold are interface-specific | 
|  | * in ath10k, but device-specific in mac80211. | 
|  | */ | 
|  |  | 
|  | static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif; | 
|  | int ret = 0; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  | list_for_each_entry(arvif, &ar->arvifs, list) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac vdev %d rts threshold %d\n", | 
|  | arvif->vdev_id, value); | 
|  |  | 
|  | ret = ath10k_mac_set_rts(arvif, value); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set rts threshold for vdev %d: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | break; | 
|  | } | 
|  | } | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_op_set_frag_threshold(struct ieee80211_hw *hw, u32 value) | 
|  | { | 
|  | /* Even though there's a WMI enum for fragmentation threshold no known | 
|  | * firmware actually implements it. Moreover it is not possible to rely | 
|  | * frame fragmentation to mac80211 because firmware clears the "more | 
|  | * fragments" bit in frame control making it impossible for remote | 
|  | * devices to reassemble frames. | 
|  | * | 
|  | * Hence implement a dummy callback just to say fragmentation isn't | 
|  | * supported. This effectively prevents mac80211 from doing frame | 
|  | * fragmentation in software. | 
|  | */ | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | void ath10k_mac_wait_tx_complete(struct ath10k *ar) | 
|  | { | 
|  | bool skip; | 
|  | long time_left; | 
|  |  | 
|  | /* mac80211 doesn't care if we really xmit queued frames or not | 
|  | * we'll collect those frames either way if we stop/delete vdevs | 
|  | */ | 
|  |  | 
|  | if (ar->state == ATH10K_STATE_WEDGED) | 
|  | return; | 
|  |  | 
|  | time_left = wait_event_timeout(ar->htt.empty_tx_wq, ({ | 
|  | bool empty; | 
|  |  | 
|  | spin_lock_bh(&ar->htt.tx_lock); | 
|  | empty = (ar->htt.num_pending_tx == 0); | 
|  | spin_unlock_bh(&ar->htt.tx_lock); | 
|  |  | 
|  | skip = (ar->state == ATH10K_STATE_WEDGED) || | 
|  | test_bit(ATH10K_FLAG_CRASH_FLUSH, | 
|  | &ar->dev_flags); | 
|  |  | 
|  | (empty || skip); | 
|  | }), ATH10K_FLUSH_TIMEOUT_HZ); | 
|  |  | 
|  | if (time_left == 0 || skip) | 
|  | ath10k_warn(ar, "failed to flush transmit queue (skip %i ar-state %i): %ld\n", | 
|  | skip, ar->state, time_left); | 
|  | } | 
|  |  | 
|  | static void ath10k_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | 
|  | u32 queues, bool drop) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif; | 
|  | u32 bitmap; | 
|  |  | 
|  | if (drop) { | 
|  | if (vif && vif->type == NL80211_IFTYPE_STATION) { | 
|  | bitmap = ~(1 << WMI_MGMT_TID); | 
|  | list_for_each_entry(arvif, &ar->arvifs, list) { | 
|  | if (arvif->vdev_type == WMI_VDEV_TYPE_STA) | 
|  | ath10k_wmi_peer_flush(ar, arvif->vdev_id, | 
|  | arvif->bssid, bitmap); | 
|  | } | 
|  | } | 
|  | return; | 
|  | } | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  | ath10k_mac_wait_tx_complete(ar); | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | } | 
|  |  | 
|  | /* TODO: Implement this function properly | 
|  | * For now it is needed to reply to Probe Requests in IBSS mode. | 
|  | * Propably we need this information from FW. | 
|  | */ | 
|  | static int ath10k_tx_last_beacon(struct ieee80211_hw *hw) | 
|  | { | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static void ath10k_reconfig_complete(struct ieee80211_hw *hw, | 
|  | enum ieee80211_reconfig_type reconfig_type) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  |  | 
|  | if (reconfig_type != IEEE80211_RECONFIG_TYPE_RESTART) | 
|  | return; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | /* If device failed to restart it will be in a different state, e.g. | 
|  | * ATH10K_STATE_WEDGED | 
|  | */ | 
|  | if (ar->state == ATH10K_STATE_RESTARTED) { | 
|  | ath10k_info(ar, "device successfully recovered\n"); | 
|  | ar->state = ATH10K_STATE_ON; | 
|  | ieee80211_wake_queues(ar->hw); | 
|  | } | 
|  |  | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | } | 
|  |  | 
|  | static void | 
|  | ath10k_mac_update_bss_chan_survey(struct ath10k *ar, | 
|  | struct ieee80211_channel *channel) | 
|  | { | 
|  | int ret; | 
|  | enum wmi_bss_survey_req_type type = WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | if (!test_bit(WMI_SERVICE_BSS_CHANNEL_INFO_64, ar->wmi.svc_map) || | 
|  | (ar->rx_channel != channel)) | 
|  | return; | 
|  |  | 
|  | if (ar->scan.state != ATH10K_SCAN_IDLE) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "ignoring bss chan info request while scanning..\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | reinit_completion(&ar->bss_survey_done); | 
|  |  | 
|  | ret = ath10k_wmi_pdev_bss_chan_info_request(ar, type); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to send pdev bss chan info request\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ret = wait_for_completion_timeout(&ar->bss_survey_done, 3 * HZ); | 
|  | if (!ret) { | 
|  | ath10k_warn(ar, "bss channel survey timed out\n"); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int ath10k_get_survey(struct ieee80211_hw *hw, int idx, | 
|  | struct survey_info *survey) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ieee80211_supported_band *sband; | 
|  | struct survey_info *ar_survey = &ar->survey[idx]; | 
|  | int ret = 0; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | sband = hw->wiphy->bands[NL80211_BAND_2GHZ]; | 
|  | if (sband && idx >= sband->n_channels) { | 
|  | idx -= sband->n_channels; | 
|  | sband = NULL; | 
|  | } | 
|  |  | 
|  | if (!sband) | 
|  | sband = hw->wiphy->bands[NL80211_BAND_5GHZ]; | 
|  |  | 
|  | if (!sband || idx >= sband->n_channels) { | 
|  | ret = -ENOENT; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | ath10k_mac_update_bss_chan_survey(ar, &sband->channels[idx]); | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | memcpy(survey, ar_survey, sizeof(*survey)); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | survey->channel = &sband->channels[idx]; | 
|  |  | 
|  | if (ar->rx_channel == survey->channel) | 
|  | survey->filled |= SURVEY_INFO_IN_USE; | 
|  |  | 
|  | exit: | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static bool | 
|  | ath10k_mac_bitrate_mask_has_single_rate(struct ath10k *ar, | 
|  | enum nl80211_band band, | 
|  | const struct cfg80211_bitrate_mask *mask, | 
|  | int *vht_num_rates) | 
|  | { | 
|  | int num_rates = 0; | 
|  | int i, tmp; | 
|  |  | 
|  | num_rates += hweight32(mask->control[band].legacy); | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++) | 
|  | num_rates += hweight8(mask->control[band].ht_mcs[i]); | 
|  |  | 
|  | *vht_num_rates = 0; | 
|  | for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++) { | 
|  | tmp = hweight16(mask->control[band].vht_mcs[i]); | 
|  | num_rates += tmp; | 
|  | *vht_num_rates += tmp; | 
|  | } | 
|  |  | 
|  | return num_rates == 1; | 
|  | } | 
|  |  | 
|  | static bool | 
|  | ath10k_mac_bitrate_mask_get_single_nss(struct ath10k *ar, | 
|  | enum nl80211_band band, | 
|  | const struct cfg80211_bitrate_mask *mask, | 
|  | int *nss) | 
|  | { | 
|  | struct ieee80211_supported_band *sband = &ar->mac.sbands[band]; | 
|  | u16 vht_mcs_map = le16_to_cpu(sband->vht_cap.vht_mcs.tx_mcs_map); | 
|  | u8 ht_nss_mask = 0; | 
|  | u8 vht_nss_mask = 0; | 
|  | int i; | 
|  |  | 
|  | if (mask->control[band].legacy) | 
|  | return false; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++) { | 
|  | if (mask->control[band].ht_mcs[i] == 0) | 
|  | continue; | 
|  | else if (mask->control[band].ht_mcs[i] == | 
|  | sband->ht_cap.mcs.rx_mask[i]) | 
|  | ht_nss_mask |= BIT(i); | 
|  | else | 
|  | return false; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++) { | 
|  | if (mask->control[band].vht_mcs[i] == 0) | 
|  | continue; | 
|  | else if (mask->control[band].vht_mcs[i] == | 
|  | ath10k_mac_get_max_vht_mcs_map(vht_mcs_map, i)) | 
|  | vht_nss_mask |= BIT(i); | 
|  | else | 
|  | return false; | 
|  | } | 
|  |  | 
|  | if (ht_nss_mask != vht_nss_mask) | 
|  | return false; | 
|  |  | 
|  | if (ht_nss_mask == 0) | 
|  | return false; | 
|  |  | 
|  | if (BIT(fls(ht_nss_mask)) - 1 != ht_nss_mask) | 
|  | return false; | 
|  |  | 
|  | *nss = fls(ht_nss_mask); | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static int | 
|  | ath10k_mac_bitrate_mask_get_single_rate(struct ath10k *ar, | 
|  | enum nl80211_band band, | 
|  | const struct cfg80211_bitrate_mask *mask, | 
|  | u8 *rate, u8 *nss, bool vht_only) | 
|  | { | 
|  | int rate_idx; | 
|  | int i; | 
|  | u16 bitrate; | 
|  | u8 preamble; | 
|  | u8 hw_rate; | 
|  |  | 
|  | if (vht_only) | 
|  | goto next; | 
|  |  | 
|  | if (hweight32(mask->control[band].legacy) == 1) { | 
|  | rate_idx = ffs(mask->control[band].legacy) - 1; | 
|  |  | 
|  | if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) | 
|  | rate_idx += ATH10K_MAC_FIRST_OFDM_RATE_IDX; | 
|  |  | 
|  | hw_rate = ath10k_wmi_legacy_rates[rate_idx].hw_value; | 
|  | bitrate = ath10k_wmi_legacy_rates[rate_idx].bitrate; | 
|  |  | 
|  | if (ath10k_mac_bitrate_is_cck(bitrate)) | 
|  | preamble = WMI_RATE_PREAMBLE_CCK; | 
|  | else | 
|  | preamble = WMI_RATE_PREAMBLE_OFDM; | 
|  |  | 
|  | *nss = 1; | 
|  | *rate = preamble << 6 | | 
|  | (*nss - 1) << 4 | | 
|  | hw_rate << 0; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(mask->control[band].ht_mcs); i++) { | 
|  | if (hweight8(mask->control[band].ht_mcs[i]) == 1) { | 
|  | *nss = i + 1; | 
|  | *rate = WMI_RATE_PREAMBLE_HT << 6 | | 
|  | (*nss - 1) << 4 | | 
|  | (ffs(mask->control[band].ht_mcs[i]) - 1); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | next: | 
|  | for (i = 0; i < ARRAY_SIZE(mask->control[band].vht_mcs); i++) { | 
|  | if (hweight16(mask->control[band].vht_mcs[i]) == 1) { | 
|  | *nss = i + 1; | 
|  | *rate = WMI_RATE_PREAMBLE_VHT << 6 | | 
|  | (*nss - 1) << 4 | | 
|  | (ffs(mask->control[band].vht_mcs[i]) - 1); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_set_fixed_rate_params(struct ath10k_vif *arvif, | 
|  | u8 rate, u8 nss, u8 sgi, u8 ldpc) | 
|  | { | 
|  | struct ath10k *ar = arvif->ar; | 
|  | u32 vdev_param; | 
|  | int ret; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac set fixed rate params vdev %i rate 0x%02hhx nss %hhu sgi %hhu\n", | 
|  | arvif->vdev_id, rate, nss, sgi); | 
|  |  | 
|  | vdev_param = ar->wmi.vdev_param->fixed_rate; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, rate); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set fixed rate param 0x%02x: %d\n", | 
|  | rate, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | vdev_param = ar->wmi.vdev_param->nss; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, nss); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set nss param %d: %d\n", nss, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | vdev_param = ar->wmi.vdev_param->sgi; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, sgi); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set sgi param %d: %d\n", sgi, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | vdev_param = ar->wmi.vdev_param->ldpc; | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, vdev_param, ldpc); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set ldpc param %d: %d\n", ldpc, ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static bool | 
|  | ath10k_mac_can_set_bitrate_mask(struct ath10k *ar, | 
|  | enum nl80211_band band, | 
|  | const struct cfg80211_bitrate_mask *mask, | 
|  | bool allow_pfr) | 
|  | { | 
|  | int i; | 
|  | u16 vht_mcs; | 
|  |  | 
|  | /* Due to firmware limitation in WMI_PEER_ASSOC_CMDID it is impossible | 
|  | * to express all VHT MCS rate masks. Effectively only the following | 
|  | * ranges can be used: none, 0-7, 0-8 and 0-9. | 
|  | */ | 
|  | for (i = 0; i < NL80211_VHT_NSS_MAX; i++) { | 
|  | vht_mcs = mask->control[band].vht_mcs[i]; | 
|  |  | 
|  | switch (vht_mcs) { | 
|  | case 0: | 
|  | case BIT(8) - 1: | 
|  | case BIT(9) - 1: | 
|  | case BIT(10) - 1: | 
|  | break; | 
|  | default: | 
|  | if (!allow_pfr) | 
|  | ath10k_warn(ar, "refusing bitrate mask with missing 0-7 VHT MCS rates\n"); | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static bool ath10k_mac_set_vht_bitrate_mask_fixup(struct ath10k *ar, | 
|  | struct ath10k_vif *arvif, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | int err; | 
|  | u8 rate = arvif->vht_pfr; | 
|  |  | 
|  | /* skip non vht and multiple rate peers */ | 
|  | if (!sta->vht_cap.vht_supported || arvif->vht_num_rates != 1) | 
|  | return false; | 
|  |  | 
|  | err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, | 
|  | WMI_PEER_PARAM_FIXED_RATE, rate); | 
|  | if (err) | 
|  | ath10k_warn(ar, "failed to eanble STA %pM peer fixed rate: %d\n", | 
|  | sta->addr, err); | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_set_bitrate_mask_iter(void *data, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct ath10k_vif *arvif = data; | 
|  | struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv; | 
|  | struct ath10k *ar = arvif->ar; | 
|  |  | 
|  | if (arsta->arvif != arvif) | 
|  | return; | 
|  |  | 
|  | if (ath10k_mac_set_vht_bitrate_mask_fixup(ar, arvif, sta)) | 
|  | return; | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | arsta->changed |= IEEE80211_RC_SUPP_RATES_CHANGED; | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | ieee80211_queue_work(ar->hw, &arsta->update_wk); | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_clr_bitrate_mask_iter(void *data, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct ath10k_vif *arvif = data; | 
|  | struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv; | 
|  | struct ath10k *ar = arvif->ar; | 
|  | int err; | 
|  |  | 
|  | /* clear vht peers only */ | 
|  | if (arsta->arvif != arvif || !sta->vht_cap.vht_supported) | 
|  | return; | 
|  |  | 
|  | err = ath10k_wmi_peer_set_param(ar, arvif->vdev_id, sta->addr, | 
|  | WMI_PEER_PARAM_FIXED_RATE, | 
|  | WMI_FIXED_RATE_NONE); | 
|  | if (err) | 
|  | ath10k_warn(ar, "failed to clear STA %pM peer fixed rate: %d\n", | 
|  | sta->addr, err); | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_op_set_bitrate_mask(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | const struct cfg80211_bitrate_mask *mask) | 
|  | { | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct cfg80211_chan_def def; | 
|  | struct ath10k *ar = arvif->ar; | 
|  | enum nl80211_band band; | 
|  | const u8 *ht_mcs_mask; | 
|  | const u16 *vht_mcs_mask; | 
|  | u8 rate; | 
|  | u8 nss; | 
|  | u8 sgi; | 
|  | u8 ldpc; | 
|  | int single_nss; | 
|  | int ret; | 
|  | int vht_num_rates, allow_pfr; | 
|  | u8 vht_pfr; | 
|  | bool update_bitrate_mask = true; | 
|  |  | 
|  | if (ath10k_mac_vif_chan(vif, &def)) | 
|  | return -EPERM; | 
|  |  | 
|  | band = def.chan->band; | 
|  | ht_mcs_mask = mask->control[band].ht_mcs; | 
|  | vht_mcs_mask = mask->control[band].vht_mcs; | 
|  | ldpc = !!(ar->ht_cap_info & WMI_HT_CAP_LDPC); | 
|  |  | 
|  | sgi = mask->control[band].gi; | 
|  | if (sgi == NL80211_TXRATE_FORCE_LGI) | 
|  | return -EINVAL; | 
|  |  | 
|  | allow_pfr = test_bit(ATH10K_FW_FEATURE_PEER_FIXED_RATE, | 
|  | ar->normal_mode_fw.fw_file.fw_features); | 
|  | if (allow_pfr) { | 
|  | mutex_lock(&ar->conf_mutex); | 
|  | ieee80211_iterate_stations_atomic(ar->hw, | 
|  | ath10k_mac_clr_bitrate_mask_iter, | 
|  | arvif); | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | } | 
|  |  | 
|  | if (ath10k_mac_bitrate_mask_has_single_rate(ar, band, mask, | 
|  | &vht_num_rates)) { | 
|  | ret = ath10k_mac_bitrate_mask_get_single_rate(ar, band, mask, | 
|  | &rate, &nss, | 
|  | false); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to get single rate for vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | return ret; | 
|  | } | 
|  | } else if (ath10k_mac_bitrate_mask_get_single_nss(ar, band, mask, | 
|  | &single_nss)) { | 
|  | rate = WMI_FIXED_RATE_NONE; | 
|  | nss = single_nss; | 
|  | } else { | 
|  | rate = WMI_FIXED_RATE_NONE; | 
|  | nss = min(ar->num_rf_chains, | 
|  | max(ath10k_mac_max_ht_nss(ht_mcs_mask), | 
|  | ath10k_mac_max_vht_nss(vht_mcs_mask))); | 
|  |  | 
|  | if (!ath10k_mac_can_set_bitrate_mask(ar, band, mask, | 
|  | allow_pfr)) { | 
|  | u8 vht_nss; | 
|  |  | 
|  | if (!allow_pfr || vht_num_rates != 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Reach here, firmware supports peer fixed rate and has | 
|  | * single vht rate, and don't update vif birate_mask, as | 
|  | * the rate only for specific peer. | 
|  | */ | 
|  | ath10k_mac_bitrate_mask_get_single_rate(ar, band, mask, | 
|  | &vht_pfr, | 
|  | &vht_nss, | 
|  | true); | 
|  | update_bitrate_mask = false; | 
|  | } | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | if (update_bitrate_mask) | 
|  | arvif->bitrate_mask = *mask; | 
|  | arvif->vht_num_rates = vht_num_rates; | 
|  | arvif->vht_pfr = vht_pfr; | 
|  | ieee80211_iterate_stations_atomic(ar->hw, | 
|  | ath10k_mac_set_bitrate_mask_iter, | 
|  | arvif); | 
|  |  | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | } | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | ret = ath10k_mac_set_fixed_rate_params(arvif, rate, nss, sgi, ldpc); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to set fixed rate params on vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | exit: | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void ath10k_sta_rc_update(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | u32 changed) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct ath10k_peer *peer; | 
|  | u32 bw, smps; | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  |  | 
|  | peer = ath10k_peer_find(ar, arvif->vdev_id, sta->addr); | 
|  | if (!peer) { | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  | ath10k_warn(ar, "mac sta rc update failed to find peer %pM on vdev %i\n", | 
|  | sta->addr, arvif->vdev_id); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac sta rc update for %pM changed %08x bw %d nss %d smps %d\n", | 
|  | sta->addr, changed, sta->bandwidth, sta->rx_nss, | 
|  | sta->smps_mode); | 
|  |  | 
|  | if (changed & IEEE80211_RC_BW_CHANGED) { | 
|  | bw = WMI_PEER_CHWIDTH_20MHZ; | 
|  |  | 
|  | switch (sta->bandwidth) { | 
|  | case IEEE80211_STA_RX_BW_20: | 
|  | bw = WMI_PEER_CHWIDTH_20MHZ; | 
|  | break; | 
|  | case IEEE80211_STA_RX_BW_40: | 
|  | bw = WMI_PEER_CHWIDTH_40MHZ; | 
|  | break; | 
|  | case IEEE80211_STA_RX_BW_80: | 
|  | bw = WMI_PEER_CHWIDTH_80MHZ; | 
|  | break; | 
|  | case IEEE80211_STA_RX_BW_160: | 
|  | bw = WMI_PEER_CHWIDTH_160MHZ; | 
|  | break; | 
|  | default: | 
|  | ath10k_warn(ar, "Invalid bandwidth %d in rc update for %pM\n", | 
|  | sta->bandwidth, sta->addr); | 
|  | bw = WMI_PEER_CHWIDTH_20MHZ; | 
|  | break; | 
|  | } | 
|  |  | 
|  | arsta->bw = bw; | 
|  | } | 
|  |  | 
|  | if (changed & IEEE80211_RC_NSS_CHANGED) | 
|  | arsta->nss = sta->rx_nss; | 
|  |  | 
|  | if (changed & IEEE80211_RC_SMPS_CHANGED) { | 
|  | smps = WMI_PEER_SMPS_PS_NONE; | 
|  |  | 
|  | switch (sta->smps_mode) { | 
|  | case IEEE80211_SMPS_AUTOMATIC: | 
|  | case IEEE80211_SMPS_OFF: | 
|  | smps = WMI_PEER_SMPS_PS_NONE; | 
|  | break; | 
|  | case IEEE80211_SMPS_STATIC: | 
|  | smps = WMI_PEER_SMPS_STATIC; | 
|  | break; | 
|  | case IEEE80211_SMPS_DYNAMIC: | 
|  | smps = WMI_PEER_SMPS_DYNAMIC; | 
|  | break; | 
|  | case IEEE80211_SMPS_NUM_MODES: | 
|  | ath10k_warn(ar, "Invalid smps %d in sta rc update for %pM\n", | 
|  | sta->smps_mode, sta->addr); | 
|  | smps = WMI_PEER_SMPS_PS_NONE; | 
|  | break; | 
|  | } | 
|  |  | 
|  | arsta->smps = smps; | 
|  | } | 
|  |  | 
|  | arsta->changed |= changed; | 
|  |  | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | ieee80211_queue_work(hw, &arsta->update_wk); | 
|  | } | 
|  |  | 
|  | static void ath10k_offset_tsf(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, s64 tsf_offset) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | u32 offset, vdev_param; | 
|  | int ret; | 
|  |  | 
|  | if (tsf_offset < 0) { | 
|  | vdev_param = ar->wmi.vdev_param->dec_tsf; | 
|  | offset = -tsf_offset; | 
|  | } else { | 
|  | vdev_param = ar->wmi.vdev_param->inc_tsf; | 
|  | offset = tsf_offset; | 
|  | } | 
|  |  | 
|  | ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, | 
|  | vdev_param, offset); | 
|  |  | 
|  | if (ret && ret != -EOPNOTSUPP) | 
|  | ath10k_warn(ar, "failed to set tsf offset %d cmd %d: %d\n", | 
|  | offset, vdev_param, ret); | 
|  | } | 
|  |  | 
|  | static int ath10k_ampdu_action(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_ampdu_params *params) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | struct ieee80211_sta *sta = params->sta; | 
|  | enum ieee80211_ampdu_mlme_action action = params->action; | 
|  | u16 tid = params->tid; | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, "mac ampdu vdev_id %i sta %pM tid %hu action %d\n", | 
|  | arvif->vdev_id, sta->addr, tid, action); | 
|  |  | 
|  | switch (action) { | 
|  | case IEEE80211_AMPDU_RX_START: | 
|  | case IEEE80211_AMPDU_RX_STOP: | 
|  | /* HTT AddBa/DelBa events trigger mac80211 Rx BA session | 
|  | * creation/removal. Do we need to verify this? | 
|  | */ | 
|  | return 0; | 
|  | case IEEE80211_AMPDU_TX_START: | 
|  | case IEEE80211_AMPDU_TX_STOP_CONT: | 
|  | case IEEE80211_AMPDU_TX_STOP_FLUSH: | 
|  | case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: | 
|  | case IEEE80211_AMPDU_TX_OPERATIONAL: | 
|  | /* Firmware offloads Tx aggregation entirely so deny mac80211 | 
|  | * Tx aggregation requests. | 
|  | */ | 
|  | return -EOPNOTSUPP; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static void | 
|  | ath10k_mac_update_rx_channel(struct ath10k *ar, | 
|  | struct ieee80211_chanctx_conf *ctx, | 
|  | struct ieee80211_vif_chanctx_switch *vifs, | 
|  | int n_vifs) | 
|  | { | 
|  | struct cfg80211_chan_def *def = NULL; | 
|  |  | 
|  | /* Both locks are required because ar->rx_channel is modified. This | 
|  | * allows readers to hold either lock. | 
|  | */ | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  | lockdep_assert_held(&ar->data_lock); | 
|  |  | 
|  | WARN_ON(ctx && vifs); | 
|  | WARN_ON(vifs && !n_vifs); | 
|  |  | 
|  | /* FIXME: Sort of an optimization and a workaround. Peers and vifs are | 
|  | * on a linked list now. Doing a lookup peer -> vif -> chanctx for each | 
|  | * ppdu on Rx may reduce performance on low-end systems. It should be | 
|  | * possible to make tables/hashmaps to speed the lookup up (be vary of | 
|  | * cpu data cache lines though regarding sizes) but to keep the initial | 
|  | * implementation simple and less intrusive fallback to the slow lookup | 
|  | * only for multi-channel cases. Single-channel cases will remain to | 
|  | * use the old channel derival and thus performance should not be | 
|  | * affected much. | 
|  | */ | 
|  | rcu_read_lock(); | 
|  | if (!ctx && ath10k_mac_num_chanctxs(ar) == 1) { | 
|  | ieee80211_iter_chan_contexts_atomic(ar->hw, | 
|  | ath10k_mac_get_any_chandef_iter, | 
|  | &def); | 
|  |  | 
|  | if (vifs) | 
|  | def = &vifs[0].new_ctx->def; | 
|  |  | 
|  | ar->rx_channel = def->chan; | 
|  | } else if ((ctx && ath10k_mac_num_chanctxs(ar) == 0) || | 
|  | (ctx && (ar->state == ATH10K_STATE_RESTARTED))) { | 
|  | /* During driver restart due to firmware assert, since mac80211 | 
|  | * already has valid channel context for given radio, channel | 
|  | * context iteration return num_chanctx > 0. So fix rx_channel | 
|  | * when restart is in progress. | 
|  | */ | 
|  | ar->rx_channel = ctx->def.chan; | 
|  | } else { | 
|  | ar->rx_channel = NULL; | 
|  | } | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static void | 
|  | ath10k_mac_update_vif_chan(struct ath10k *ar, | 
|  | struct ieee80211_vif_chanctx_switch *vifs, | 
|  | int n_vifs) | 
|  | { | 
|  | struct ath10k_vif *arvif; | 
|  | int ret; | 
|  | int i; | 
|  |  | 
|  | lockdep_assert_held(&ar->conf_mutex); | 
|  |  | 
|  | /* First stop monitor interface. Some FW versions crash if there's a | 
|  | * lone monitor interface. | 
|  | */ | 
|  | if (ar->monitor_started) | 
|  | ath10k_monitor_stop(ar); | 
|  |  | 
|  | for (i = 0; i < n_vifs; i++) { | 
|  | arvif = (void *)vifs[i].vif->drv_priv; | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac chanctx switch vdev_id %i freq %hu->%hu width %d->%d\n", | 
|  | arvif->vdev_id, | 
|  | vifs[i].old_ctx->def.chan->center_freq, | 
|  | vifs[i].new_ctx->def.chan->center_freq, | 
|  | vifs[i].old_ctx->def.width, | 
|  | vifs[i].new_ctx->def.width); | 
|  |  | 
|  | if (WARN_ON(!arvif->is_started)) | 
|  | continue; | 
|  |  | 
|  | if (WARN_ON(!arvif->is_up)) | 
|  | continue; | 
|  |  | 
|  | ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to down vdev %d: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* All relevant vdevs are downed and associated channel resources | 
|  | * should be available for the channel switch now. | 
|  | */ | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | ath10k_mac_update_rx_channel(ar, NULL, vifs, n_vifs); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | for (i = 0; i < n_vifs; i++) { | 
|  | arvif = (void *)vifs[i].vif->drv_priv; | 
|  |  | 
|  | if (WARN_ON(!arvif->is_started)) | 
|  | continue; | 
|  |  | 
|  | if (WARN_ON(!arvif->is_up)) | 
|  | continue; | 
|  |  | 
|  | ret = ath10k_mac_setup_bcn_tmpl(arvif); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to update bcn tmpl during csa: %d\n", | 
|  | ret); | 
|  |  | 
|  | ret = ath10k_mac_setup_prb_tmpl(arvif); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to update prb tmpl during csa: %d\n", | 
|  | ret); | 
|  |  | 
|  | ret = ath10k_vdev_restart(arvif, &vifs[i].new_ctx->def); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to restart vdev %d: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid, | 
|  | arvif->bssid); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to bring vdev up %d: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | continue; | 
|  | } | 
|  | } | 
|  |  | 
|  | ath10k_monitor_recalc(ar); | 
|  | } | 
|  |  | 
|  | static int | 
|  | ath10k_mac_op_add_chanctx(struct ieee80211_hw *hw, | 
|  | struct ieee80211_chanctx_conf *ctx) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac chanctx add freq %hu width %d ptr %pK\n", | 
|  | ctx->def.chan->center_freq, ctx->def.width, ctx); | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | ath10k_mac_update_rx_channel(ar, ctx, NULL, 0); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | ath10k_recalc_radar_detection(ar); | 
|  | ath10k_monitor_recalc(ar); | 
|  |  | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void | 
|  | ath10k_mac_op_remove_chanctx(struct ieee80211_hw *hw, | 
|  | struct ieee80211_chanctx_conf *ctx) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac chanctx remove freq %hu width %d ptr %pK\n", | 
|  | ctx->def.chan->center_freq, ctx->def.width, ctx); | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | spin_lock_bh(&ar->data_lock); | 
|  | ath10k_mac_update_rx_channel(ar, NULL, NULL, 0); | 
|  | spin_unlock_bh(&ar->data_lock); | 
|  |  | 
|  | ath10k_recalc_radar_detection(ar); | 
|  | ath10k_monitor_recalc(ar); | 
|  |  | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | } | 
|  |  | 
|  | struct ath10k_mac_change_chanctx_arg { | 
|  | struct ieee80211_chanctx_conf *ctx; | 
|  | struct ieee80211_vif_chanctx_switch *vifs; | 
|  | int n_vifs; | 
|  | int next_vif; | 
|  | }; | 
|  |  | 
|  | static void | 
|  | ath10k_mac_change_chanctx_cnt_iter(void *data, u8 *mac, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath10k_mac_change_chanctx_arg *arg = data; | 
|  |  | 
|  | if (rcu_access_pointer(vif->chanctx_conf) != arg->ctx) | 
|  | return; | 
|  |  | 
|  | arg->n_vifs++; | 
|  | } | 
|  |  | 
|  | static void | 
|  | ath10k_mac_change_chanctx_fill_iter(void *data, u8 *mac, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath10k_mac_change_chanctx_arg *arg = data; | 
|  | struct ieee80211_chanctx_conf *ctx; | 
|  |  | 
|  | ctx = rcu_access_pointer(vif->chanctx_conf); | 
|  | if (ctx != arg->ctx) | 
|  | return; | 
|  |  | 
|  | if (WARN_ON(arg->next_vif == arg->n_vifs)) | 
|  | return; | 
|  |  | 
|  | arg->vifs[arg->next_vif].vif = vif; | 
|  | arg->vifs[arg->next_vif].old_ctx = ctx; | 
|  | arg->vifs[arg->next_vif].new_ctx = ctx; | 
|  | arg->next_vif++; | 
|  | } | 
|  |  | 
|  | static void | 
|  | ath10k_mac_op_change_chanctx(struct ieee80211_hw *hw, | 
|  | struct ieee80211_chanctx_conf *ctx, | 
|  | u32 changed) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_mac_change_chanctx_arg arg = { .ctx = ctx }; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac chanctx change freq %hu width %d ptr %pK changed %x\n", | 
|  | ctx->def.chan->center_freq, ctx->def.width, ctx, changed); | 
|  |  | 
|  | /* This shouldn't really happen because channel switching should use | 
|  | * switch_vif_chanctx(). | 
|  | */ | 
|  | if (WARN_ON(changed & IEEE80211_CHANCTX_CHANGE_CHANNEL)) | 
|  | goto unlock; | 
|  |  | 
|  | if (changed & IEEE80211_CHANCTX_CHANGE_WIDTH) { | 
|  | ieee80211_iterate_active_interfaces_atomic( | 
|  | hw, | 
|  | IEEE80211_IFACE_ITER_NORMAL, | 
|  | ath10k_mac_change_chanctx_cnt_iter, | 
|  | &arg); | 
|  | if (arg.n_vifs == 0) | 
|  | goto radar; | 
|  |  | 
|  | arg.vifs = kcalloc(arg.n_vifs, sizeof(arg.vifs[0]), | 
|  | GFP_KERNEL); | 
|  | if (!arg.vifs) | 
|  | goto radar; | 
|  |  | 
|  | ieee80211_iterate_active_interfaces_atomic( | 
|  | hw, | 
|  | IEEE80211_IFACE_ITER_NORMAL, | 
|  | ath10k_mac_change_chanctx_fill_iter, | 
|  | &arg); | 
|  | ath10k_mac_update_vif_chan(ar, arg.vifs, arg.n_vifs); | 
|  | kfree(arg.vifs); | 
|  | } | 
|  |  | 
|  | radar: | 
|  | ath10k_recalc_radar_detection(ar); | 
|  |  | 
|  | /* FIXME: How to configure Rx chains properly? */ | 
|  |  | 
|  | /* No other actions are actually necessary. Firmware maintains channel | 
|  | * definitions per vdev internally and there's no host-side channel | 
|  | * context abstraction to configure, e.g. channel width. | 
|  | */ | 
|  |  | 
|  | unlock: | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | } | 
|  |  | 
|  | static int | 
|  | ath10k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_chanctx_conf *ctx) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac chanctx assign ptr %pK vdev_id %i\n", | 
|  | ctx, arvif->vdev_id); | 
|  |  | 
|  | if (WARN_ON(arvif->is_started)) { | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | ret = ath10k_vdev_start(arvif, &ctx->def); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to start vdev %i addr %pM on freq %d: %d\n", | 
|  | arvif->vdev_id, vif->addr, | 
|  | ctx->def.chan->center_freq, ret); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | arvif->is_started = true; | 
|  |  | 
|  | ret = ath10k_mac_vif_setup_ps(arvif); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to update vdev %i ps: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | goto err_stop; | 
|  | } | 
|  |  | 
|  | if (vif->type == NL80211_IFTYPE_MONITOR) { | 
|  | ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, 0, vif->addr); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to up monitor vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | goto err_stop; | 
|  | } | 
|  |  | 
|  | arvif->is_up = true; | 
|  | } | 
|  |  | 
|  | if (ath10k_mac_can_set_cts_prot(arvif)) { | 
|  | ret = ath10k_mac_set_cts_prot(arvif); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to set cts protection for vdev %d: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  | } | 
|  |  | 
|  | if (ath10k_peer_stats_enabled(ar) && | 
|  | ar->hw_params.tx_stats_over_pktlog) { | 
|  | ar->pktlog_filter |= ATH10K_PKTLOG_PEER_STATS; | 
|  | ret = ath10k_wmi_pdev_pktlog_enable(ar, | 
|  | ar->pktlog_filter); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to enable pktlog %d\n", ret); | 
|  | goto err_stop; | 
|  | } | 
|  | } | 
|  |  | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return 0; | 
|  |  | 
|  | err_stop: | 
|  | ath10k_vdev_stop(arvif); | 
|  | arvif->is_started = false; | 
|  | ath10k_mac_vif_setup_ps(arvif); | 
|  |  | 
|  | err: | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void | 
|  | ath10k_mac_op_unassign_vif_chanctx(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_chanctx_conf *ctx) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac chanctx unassign ptr %pK vdev_id %i\n", | 
|  | ctx, arvif->vdev_id); | 
|  |  | 
|  | WARN_ON(!arvif->is_started); | 
|  |  | 
|  | if (vif->type == NL80211_IFTYPE_MONITOR) { | 
|  | WARN_ON(!arvif->is_up); | 
|  |  | 
|  | ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to down monitor vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  |  | 
|  | arvif->is_up = false; | 
|  | } | 
|  |  | 
|  | ret = ath10k_vdev_stop(arvif); | 
|  | if (ret) | 
|  | ath10k_warn(ar, "failed to stop vdev %i: %d\n", | 
|  | arvif->vdev_id, ret); | 
|  |  | 
|  | arvif->is_started = false; | 
|  |  | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | } | 
|  |  | 
|  | static int | 
|  | ath10k_mac_op_switch_vif_chanctx(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif_chanctx_switch *vifs, | 
|  | int n_vifs, | 
|  | enum ieee80211_chanctx_switch_mode mode) | 
|  | { | 
|  | struct ath10k *ar = hw->priv; | 
|  |  | 
|  | mutex_lock(&ar->conf_mutex); | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_MAC, | 
|  | "mac chanctx switch n_vifs %d mode %d\n", | 
|  | n_vifs, mode); | 
|  | ath10k_mac_update_vif_chan(ar, vifs, n_vifs); | 
|  |  | 
|  | mutex_unlock(&ar->conf_mutex); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void ath10k_mac_op_sta_pre_rcu_remove(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta) | 
|  | { | 
|  | struct ath10k *ar; | 
|  | struct ath10k_peer *peer; | 
|  |  | 
|  | ar = hw->priv; | 
|  |  | 
|  | list_for_each_entry(peer, &ar->peers, list) | 
|  | if (peer->sta == sta) | 
|  | peer->removed = true; | 
|  | } | 
|  |  | 
|  | static void ath10k_sta_statistics(struct ieee80211_hw *hw, | 
|  | struct ieee80211_vif *vif, | 
|  | struct ieee80211_sta *sta, | 
|  | struct station_info *sinfo) | 
|  | { | 
|  | struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv; | 
|  | struct ath10k *ar = arsta->arvif->ar; | 
|  |  | 
|  | if (!ath10k_peer_stats_enabled(ar)) | 
|  | return; | 
|  |  | 
|  | sinfo->rx_duration = arsta->rx_duration; | 
|  | sinfo->filled |= BIT_ULL(NL80211_STA_INFO_RX_DURATION); | 
|  |  | 
|  | if (!arsta->txrate.legacy && !arsta->txrate.nss) | 
|  | return; | 
|  |  | 
|  | if (arsta->txrate.legacy) { | 
|  | sinfo->txrate.legacy = arsta->txrate.legacy; | 
|  | } else { | 
|  | sinfo->txrate.mcs = arsta->txrate.mcs; | 
|  | sinfo->txrate.nss = arsta->txrate.nss; | 
|  | sinfo->txrate.bw = arsta->txrate.bw; | 
|  | } | 
|  | sinfo->txrate.flags = arsta->txrate.flags; | 
|  | sinfo->filled |= BIT_ULL(NL80211_STA_INFO_TX_BITRATE); | 
|  | } | 
|  |  | 
|  | static const struct ieee80211_ops ath10k_ops = { | 
|  | .tx				= ath10k_mac_op_tx, | 
|  | .wake_tx_queue			= ath10k_mac_op_wake_tx_queue, | 
|  | .start				= ath10k_start, | 
|  | .stop				= ath10k_stop, | 
|  | .config				= ath10k_config, | 
|  | .add_interface			= ath10k_add_interface, | 
|  | .remove_interface		= ath10k_remove_interface, | 
|  | .configure_filter		= ath10k_configure_filter, | 
|  | .bss_info_changed		= ath10k_bss_info_changed, | 
|  | .set_coverage_class		= ath10k_mac_op_set_coverage_class, | 
|  | .hw_scan			= ath10k_hw_scan, | 
|  | .cancel_hw_scan			= ath10k_cancel_hw_scan, | 
|  | .set_key			= ath10k_set_key, | 
|  | .set_default_unicast_key        = ath10k_set_default_unicast_key, | 
|  | .sta_state			= ath10k_sta_state, | 
|  | .sta_set_txpwr			= ath10k_sta_set_txpwr, | 
|  | .conf_tx			= ath10k_conf_tx, | 
|  | .remain_on_channel		= ath10k_remain_on_channel, | 
|  | .cancel_remain_on_channel	= ath10k_cancel_remain_on_channel, | 
|  | .set_rts_threshold		= ath10k_set_rts_threshold, | 
|  | .set_frag_threshold		= ath10k_mac_op_set_frag_threshold, | 
|  | .flush				= ath10k_flush, | 
|  | .tx_last_beacon			= ath10k_tx_last_beacon, | 
|  | .set_antenna			= ath10k_set_antenna, | 
|  | .get_antenna			= ath10k_get_antenna, | 
|  | .reconfig_complete		= ath10k_reconfig_complete, | 
|  | .get_survey			= ath10k_get_survey, | 
|  | .set_bitrate_mask		= ath10k_mac_op_set_bitrate_mask, | 
|  | .sta_rc_update			= ath10k_sta_rc_update, | 
|  | .offset_tsf			= ath10k_offset_tsf, | 
|  | .ampdu_action			= ath10k_ampdu_action, | 
|  | .get_et_sset_count		= ath10k_debug_get_et_sset_count, | 
|  | .get_et_stats			= ath10k_debug_get_et_stats, | 
|  | .get_et_strings			= ath10k_debug_get_et_strings, | 
|  | .add_chanctx			= ath10k_mac_op_add_chanctx, | 
|  | .remove_chanctx			= ath10k_mac_op_remove_chanctx, | 
|  | .change_chanctx			= ath10k_mac_op_change_chanctx, | 
|  | .assign_vif_chanctx		= ath10k_mac_op_assign_vif_chanctx, | 
|  | .unassign_vif_chanctx		= ath10k_mac_op_unassign_vif_chanctx, | 
|  | .switch_vif_chanctx		= ath10k_mac_op_switch_vif_chanctx, | 
|  | .sta_pre_rcu_remove		= ath10k_mac_op_sta_pre_rcu_remove, | 
|  | .sta_statistics			= ath10k_sta_statistics, | 
|  |  | 
|  | CFG80211_TESTMODE_CMD(ath10k_tm_cmd) | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | .suspend			= ath10k_wow_op_suspend, | 
|  | .resume				= ath10k_wow_op_resume, | 
|  | .set_wakeup			= ath10k_wow_op_set_wakeup, | 
|  | #endif | 
|  | #ifdef CONFIG_MAC80211_DEBUGFS | 
|  | .sta_add_debugfs		= ath10k_sta_add_debugfs, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | #define CHAN2G(_channel, _freq, _flags) { \ | 
|  | .band			= NL80211_BAND_2GHZ, \ | 
|  | .hw_value		= (_channel), \ | 
|  | .center_freq		= (_freq), \ | 
|  | .flags			= (_flags), \ | 
|  | .max_antenna_gain	= 0, \ | 
|  | .max_power		= 30, \ | 
|  | } | 
|  |  | 
|  | #define CHAN5G(_channel, _freq, _flags) { \ | 
|  | .band			= NL80211_BAND_5GHZ, \ | 
|  | .hw_value		= (_channel), \ | 
|  | .center_freq		= (_freq), \ | 
|  | .flags			= (_flags), \ | 
|  | .max_antenna_gain	= 0, \ | 
|  | .max_power		= 30, \ | 
|  | } | 
|  |  | 
|  | static const struct ieee80211_channel ath10k_2ghz_channels[] = { | 
|  | CHAN2G(1, 2412, 0), | 
|  | CHAN2G(2, 2417, 0), | 
|  | CHAN2G(3, 2422, 0), | 
|  | CHAN2G(4, 2427, 0), | 
|  | CHAN2G(5, 2432, 0), | 
|  | CHAN2G(6, 2437, 0), | 
|  | CHAN2G(7, 2442, 0), | 
|  | CHAN2G(8, 2447, 0), | 
|  | CHAN2G(9, 2452, 0), | 
|  | CHAN2G(10, 2457, 0), | 
|  | CHAN2G(11, 2462, 0), | 
|  | CHAN2G(12, 2467, 0), | 
|  | CHAN2G(13, 2472, 0), | 
|  | CHAN2G(14, 2484, 0), | 
|  | }; | 
|  |  | 
|  | static const struct ieee80211_channel ath10k_5ghz_channels[] = { | 
|  | CHAN5G(36, 5180, 0), | 
|  | CHAN5G(40, 5200, 0), | 
|  | CHAN5G(44, 5220, 0), | 
|  | CHAN5G(48, 5240, 0), | 
|  | CHAN5G(52, 5260, 0), | 
|  | CHAN5G(56, 5280, 0), | 
|  | CHAN5G(60, 5300, 0), | 
|  | CHAN5G(64, 5320, 0), | 
|  | CHAN5G(100, 5500, 0), | 
|  | CHAN5G(104, 5520, 0), | 
|  | CHAN5G(108, 5540, 0), | 
|  | CHAN5G(112, 5560, 0), | 
|  | CHAN5G(116, 5580, 0), | 
|  | CHAN5G(120, 5600, 0), | 
|  | CHAN5G(124, 5620, 0), | 
|  | CHAN5G(128, 5640, 0), | 
|  | CHAN5G(132, 5660, 0), | 
|  | CHAN5G(136, 5680, 0), | 
|  | CHAN5G(140, 5700, 0), | 
|  | CHAN5G(144, 5720, 0), | 
|  | CHAN5G(149, 5745, 0), | 
|  | CHAN5G(153, 5765, 0), | 
|  | CHAN5G(157, 5785, 0), | 
|  | CHAN5G(161, 5805, 0), | 
|  | CHAN5G(165, 5825, 0), | 
|  | CHAN5G(169, 5845, 0), | 
|  | CHAN5G(173, 5865, 0), | 
|  | /* If you add more, you may need to change ATH10K_MAX_5G_CHAN */ | 
|  | /* And you will definitely need to change ATH10K_NUM_CHANS in core.h */ | 
|  | }; | 
|  |  | 
|  | struct ath10k *ath10k_mac_create(size_t priv_size) | 
|  | { | 
|  | struct ieee80211_hw *hw; | 
|  | struct ieee80211_ops *ops; | 
|  | struct ath10k *ar; | 
|  |  | 
|  | ops = kmemdup(&ath10k_ops, sizeof(ath10k_ops), GFP_KERNEL); | 
|  | if (!ops) | 
|  | return NULL; | 
|  |  | 
|  | hw = ieee80211_alloc_hw(sizeof(struct ath10k) + priv_size, ops); | 
|  | if (!hw) { | 
|  | kfree(ops); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | ar = hw->priv; | 
|  | ar->hw = hw; | 
|  | ar->ops = ops; | 
|  |  | 
|  | return ar; | 
|  | } | 
|  |  | 
|  | void ath10k_mac_destroy(struct ath10k *ar) | 
|  | { | 
|  | struct ieee80211_ops *ops = ar->ops; | 
|  |  | 
|  | ieee80211_free_hw(ar->hw); | 
|  | kfree(ops); | 
|  | } | 
|  |  | 
|  | static const struct ieee80211_iface_limit ath10k_if_limits[] = { | 
|  | { | 
|  | .max	= 8, | 
|  | .types	= BIT(NL80211_IFTYPE_STATION) | 
|  | | BIT(NL80211_IFTYPE_P2P_CLIENT) | 
|  | }, | 
|  | { | 
|  | .max	= 3, | 
|  | .types	= BIT(NL80211_IFTYPE_P2P_GO) | 
|  | }, | 
|  | { | 
|  | .max	= 1, | 
|  | .types	= BIT(NL80211_IFTYPE_P2P_DEVICE) | 
|  | }, | 
|  | { | 
|  | .max	= 7, | 
|  | .types	= BIT(NL80211_IFTYPE_AP) | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | | BIT(NL80211_IFTYPE_MESH_POINT) | 
|  | #endif | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct ieee80211_iface_limit ath10k_10x_if_limits[] = { | 
|  | { | 
|  | .max	= 8, | 
|  | .types	= BIT(NL80211_IFTYPE_AP) | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | | BIT(NL80211_IFTYPE_MESH_POINT) | 
|  | #endif | 
|  | }, | 
|  | { | 
|  | .max	= 1, | 
|  | .types	= BIT(NL80211_IFTYPE_STATION) | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct ieee80211_iface_combination ath10k_if_comb[] = { | 
|  | { | 
|  | .limits = ath10k_if_limits, | 
|  | .n_limits = ARRAY_SIZE(ath10k_if_limits), | 
|  | .max_interfaces = 8, | 
|  | .num_different_channels = 1, | 
|  | .beacon_int_infra_match = true, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct ieee80211_iface_combination ath10k_10x_if_comb[] = { | 
|  | { | 
|  | .limits = ath10k_10x_if_limits, | 
|  | .n_limits = ARRAY_SIZE(ath10k_10x_if_limits), | 
|  | .max_interfaces = 8, | 
|  | .num_different_channels = 1, | 
|  | .beacon_int_infra_match = true, | 
|  | .beacon_int_min_gcd = 1, | 
|  | #ifdef CONFIG_ATH10K_DFS_CERTIFIED | 
|  | .radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) | | 
|  | BIT(NL80211_CHAN_WIDTH_20) | | 
|  | BIT(NL80211_CHAN_WIDTH_40) | | 
|  | BIT(NL80211_CHAN_WIDTH_80), | 
|  | #endif | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct ieee80211_iface_limit ath10k_tlv_if_limit[] = { | 
|  | { | 
|  | .max = 2, | 
|  | .types = BIT(NL80211_IFTYPE_STATION), | 
|  | }, | 
|  | { | 
|  | .max = 2, | 
|  | .types = BIT(NL80211_IFTYPE_AP) | | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | BIT(NL80211_IFTYPE_MESH_POINT) | | 
|  | #endif | 
|  | BIT(NL80211_IFTYPE_P2P_CLIENT) | | 
|  | BIT(NL80211_IFTYPE_P2P_GO), | 
|  | }, | 
|  | { | 
|  | .max = 1, | 
|  | .types = BIT(NL80211_IFTYPE_P2P_DEVICE), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct ieee80211_iface_limit ath10k_tlv_qcs_if_limit[] = { | 
|  | { | 
|  | .max = 2, | 
|  | .types = BIT(NL80211_IFTYPE_STATION), | 
|  | }, | 
|  | { | 
|  | .max = 2, | 
|  | .types = BIT(NL80211_IFTYPE_P2P_CLIENT), | 
|  | }, | 
|  | { | 
|  | .max = 1, | 
|  | .types = BIT(NL80211_IFTYPE_AP) | | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | BIT(NL80211_IFTYPE_MESH_POINT) | | 
|  | #endif | 
|  | BIT(NL80211_IFTYPE_P2P_GO), | 
|  | }, | 
|  | { | 
|  | .max = 1, | 
|  | .types = BIT(NL80211_IFTYPE_P2P_DEVICE), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct ieee80211_iface_limit ath10k_tlv_if_limit_ibss[] = { | 
|  | { | 
|  | .max = 1, | 
|  | .types = BIT(NL80211_IFTYPE_STATION), | 
|  | }, | 
|  | { | 
|  | .max = 1, | 
|  | .types = BIT(NL80211_IFTYPE_ADHOC), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* FIXME: This is not thouroughly tested. These combinations may over- or | 
|  | * underestimate hw/fw capabilities. | 
|  | */ | 
|  | static struct ieee80211_iface_combination ath10k_tlv_if_comb[] = { | 
|  | { | 
|  | .limits = ath10k_tlv_if_limit, | 
|  | .num_different_channels = 1, | 
|  | .max_interfaces = 4, | 
|  | .n_limits = ARRAY_SIZE(ath10k_tlv_if_limit), | 
|  | }, | 
|  | { | 
|  | .limits = ath10k_tlv_if_limit_ibss, | 
|  | .num_different_channels = 1, | 
|  | .max_interfaces = 2, | 
|  | .n_limits = ARRAY_SIZE(ath10k_tlv_if_limit_ibss), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct ieee80211_iface_combination ath10k_tlv_qcs_if_comb[] = { | 
|  | { | 
|  | .limits = ath10k_tlv_if_limit, | 
|  | .num_different_channels = 1, | 
|  | .max_interfaces = 4, | 
|  | .n_limits = ARRAY_SIZE(ath10k_tlv_if_limit), | 
|  | }, | 
|  | { | 
|  | .limits = ath10k_tlv_qcs_if_limit, | 
|  | .num_different_channels = 2, | 
|  | .max_interfaces = 4, | 
|  | .n_limits = ARRAY_SIZE(ath10k_tlv_qcs_if_limit), | 
|  | }, | 
|  | { | 
|  | .limits = ath10k_tlv_if_limit_ibss, | 
|  | .num_different_channels = 1, | 
|  | .max_interfaces = 2, | 
|  | .n_limits = ARRAY_SIZE(ath10k_tlv_if_limit_ibss), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct ieee80211_iface_limit ath10k_10_4_if_limits[] = { | 
|  | { | 
|  | .max = 1, | 
|  | .types = BIT(NL80211_IFTYPE_STATION), | 
|  | }, | 
|  | { | 
|  | .max	= 16, | 
|  | .types	= BIT(NL80211_IFTYPE_AP) | 
|  | #ifdef CONFIG_MAC80211_MESH | 
|  | | BIT(NL80211_IFTYPE_MESH_POINT) | 
|  | #endif | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct ieee80211_iface_combination ath10k_10_4_if_comb[] = { | 
|  | { | 
|  | .limits = ath10k_10_4_if_limits, | 
|  | .n_limits = ARRAY_SIZE(ath10k_10_4_if_limits), | 
|  | .max_interfaces = 16, | 
|  | .num_different_channels = 1, | 
|  | .beacon_int_infra_match = true, | 
|  | .beacon_int_min_gcd = 1, | 
|  | #ifdef CONFIG_ATH10K_DFS_CERTIFIED | 
|  | .radar_detect_widths =	BIT(NL80211_CHAN_WIDTH_20_NOHT) | | 
|  | BIT(NL80211_CHAN_WIDTH_20) | | 
|  | BIT(NL80211_CHAN_WIDTH_40) | | 
|  | BIT(NL80211_CHAN_WIDTH_80), | 
|  | #endif | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct | 
|  | ieee80211_iface_combination ath10k_10_4_bcn_int_if_comb[] = { | 
|  | { | 
|  | .limits = ath10k_10_4_if_limits, | 
|  | .n_limits = ARRAY_SIZE(ath10k_10_4_if_limits), | 
|  | .max_interfaces = 16, | 
|  | .num_different_channels = 1, | 
|  | .beacon_int_infra_match = true, | 
|  | .beacon_int_min_gcd = 100, | 
|  | #ifdef CONFIG_ATH10K_DFS_CERTIFIED | 
|  | .radar_detect_widths =  BIT(NL80211_CHAN_WIDTH_20_NOHT) | | 
|  | BIT(NL80211_CHAN_WIDTH_20) | | 
|  | BIT(NL80211_CHAN_WIDTH_40) | | 
|  | BIT(NL80211_CHAN_WIDTH_80), | 
|  | #endif | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static void ath10k_get_arvif_iter(void *data, u8 *mac, | 
|  | struct ieee80211_vif *vif) | 
|  | { | 
|  | struct ath10k_vif_iter *arvif_iter = data; | 
|  | struct ath10k_vif *arvif = (void *)vif->drv_priv; | 
|  |  | 
|  | if (arvif->vdev_id == arvif_iter->vdev_id) | 
|  | arvif_iter->arvif = arvif; | 
|  | } | 
|  |  | 
|  | struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id) | 
|  | { | 
|  | struct ath10k_vif_iter arvif_iter; | 
|  | u32 flags; | 
|  |  | 
|  | memset(&arvif_iter, 0, sizeof(struct ath10k_vif_iter)); | 
|  | arvif_iter.vdev_id = vdev_id; | 
|  |  | 
|  | flags = IEEE80211_IFACE_ITER_RESUME_ALL; | 
|  | ieee80211_iterate_active_interfaces_atomic(ar->hw, | 
|  | flags, | 
|  | ath10k_get_arvif_iter, | 
|  | &arvif_iter); | 
|  | if (!arvif_iter.arvif) { | 
|  | ath10k_warn(ar, "No VIF found for vdev %d\n", vdev_id); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | return arvif_iter.arvif; | 
|  | } | 
|  |  | 
|  | #define WRD_METHOD "WRDD" | 
|  | #define WRDD_WIFI  (0x07) | 
|  |  | 
|  | static u32 ath10k_mac_wrdd_get_mcc(struct ath10k *ar, union acpi_object *wrdd) | 
|  | { | 
|  | union acpi_object *mcc_pkg; | 
|  | union acpi_object *domain_type; | 
|  | union acpi_object *mcc_value; | 
|  | u32 i; | 
|  |  | 
|  | if (wrdd->type != ACPI_TYPE_PACKAGE || | 
|  | wrdd->package.count < 2 || | 
|  | wrdd->package.elements[0].type != ACPI_TYPE_INTEGER || | 
|  | wrdd->package.elements[0].integer.value != 0) { | 
|  | ath10k_warn(ar, "ignoring malformed/unsupported wrdd structure\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | for (i = 1; i < wrdd->package.count; ++i) { | 
|  | mcc_pkg = &wrdd->package.elements[i]; | 
|  |  | 
|  | if (mcc_pkg->type != ACPI_TYPE_PACKAGE) | 
|  | continue; | 
|  | if (mcc_pkg->package.count < 2) | 
|  | continue; | 
|  | if (mcc_pkg->package.elements[0].type != ACPI_TYPE_INTEGER || | 
|  | mcc_pkg->package.elements[1].type != ACPI_TYPE_INTEGER) | 
|  | continue; | 
|  |  | 
|  | domain_type = &mcc_pkg->package.elements[0]; | 
|  | if (domain_type->integer.value != WRDD_WIFI) | 
|  | continue; | 
|  |  | 
|  | mcc_value = &mcc_pkg->package.elements[1]; | 
|  | return mcc_value->integer.value; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_get_wrdd_regulatory(struct ath10k *ar, u16 *rd) | 
|  | { | 
|  | acpi_handle root_handle; | 
|  | acpi_handle handle; | 
|  | struct acpi_buffer wrdd = {ACPI_ALLOCATE_BUFFER, NULL}; | 
|  | acpi_status status; | 
|  | u32 alpha2_code; | 
|  | char alpha2[3]; | 
|  |  | 
|  | root_handle = ACPI_HANDLE(ar->dev); | 
|  | if (!root_handle) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | status = acpi_get_handle(root_handle, (acpi_string)WRD_METHOD, &handle); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_BOOT, | 
|  | "failed to get wrd method %d\n", status); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | status = acpi_evaluate_object(handle, NULL, NULL, &wrdd); | 
|  | if (ACPI_FAILURE(status)) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_BOOT, | 
|  | "failed to call wrdc %d\n", status); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | alpha2_code = ath10k_mac_wrdd_get_mcc(ar, wrdd.pointer); | 
|  | kfree(wrdd.pointer); | 
|  | if (!alpha2_code) | 
|  | return -EIO; | 
|  |  | 
|  | alpha2[0] = (alpha2_code >> 8) & 0xff; | 
|  | alpha2[1] = (alpha2_code >> 0) & 0xff; | 
|  | alpha2[2] = '\0'; | 
|  |  | 
|  | ath10k_dbg(ar, ATH10K_DBG_BOOT, | 
|  | "regulatory hint from WRDD (alpha2-code): %s\n", alpha2); | 
|  |  | 
|  | *rd = ath_regd_find_country_by_name(alpha2); | 
|  | if (*rd == 0xffff) | 
|  | return -EIO; | 
|  |  | 
|  | *rd |= COUNTRY_ERD_FLAG; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ath10k_mac_init_rd(struct ath10k *ar) | 
|  | { | 
|  | int ret; | 
|  | u16 rd; | 
|  |  | 
|  | ret = ath10k_mac_get_wrdd_regulatory(ar, &rd); | 
|  | if (ret) { | 
|  | ath10k_dbg(ar, ATH10K_DBG_BOOT, | 
|  | "fallback to eeprom programmed regulatory settings\n"); | 
|  | rd = ar->hw_eeprom_rd; | 
|  | } | 
|  |  | 
|  | ar->ath_common.regulatory.current_rd = rd; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int ath10k_mac_register(struct ath10k *ar) | 
|  | { | 
|  | static const u32 cipher_suites[] = { | 
|  | WLAN_CIPHER_SUITE_WEP40, | 
|  | WLAN_CIPHER_SUITE_WEP104, | 
|  | WLAN_CIPHER_SUITE_TKIP, | 
|  | WLAN_CIPHER_SUITE_CCMP, | 
|  |  | 
|  | /* Do not add hardware supported ciphers before this line. | 
|  | * Allow software encryption for all chips. Don't forget to | 
|  | * update n_cipher_suites below. | 
|  | */ | 
|  | WLAN_CIPHER_SUITE_AES_CMAC, | 
|  | WLAN_CIPHER_SUITE_BIP_CMAC_256, | 
|  | WLAN_CIPHER_SUITE_BIP_GMAC_128, | 
|  | WLAN_CIPHER_SUITE_BIP_GMAC_256, | 
|  |  | 
|  | /* Only QCA99x0 and QCA4019 varients support GCMP-128, GCMP-256 | 
|  | * and CCMP-256 in hardware. | 
|  | */ | 
|  | WLAN_CIPHER_SUITE_GCMP, | 
|  | WLAN_CIPHER_SUITE_GCMP_256, | 
|  | WLAN_CIPHER_SUITE_CCMP_256, | 
|  | }; | 
|  | struct ieee80211_supported_band *band; | 
|  | void *channels; | 
|  | int ret; | 
|  |  | 
|  | if (!is_valid_ether_addr(ar->mac_addr)) { | 
|  | ath10k_warn(ar, "invalid MAC address; choosing random\n"); | 
|  | eth_random_addr(ar->mac_addr); | 
|  | } | 
|  | SET_IEEE80211_PERM_ADDR(ar->hw, ar->mac_addr); | 
|  |  | 
|  | SET_IEEE80211_DEV(ar->hw, ar->dev); | 
|  |  | 
|  | BUILD_BUG_ON((ARRAY_SIZE(ath10k_2ghz_channels) + | 
|  | ARRAY_SIZE(ath10k_5ghz_channels)) != | 
|  | ATH10K_NUM_CHANS); | 
|  |  | 
|  | if (ar->phy_capability & WHAL_WLAN_11G_CAPABILITY) { | 
|  | channels = kmemdup(ath10k_2ghz_channels, | 
|  | sizeof(ath10k_2ghz_channels), | 
|  | GFP_KERNEL); | 
|  | if (!channels) { | 
|  | ret = -ENOMEM; | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | band = &ar->mac.sbands[NL80211_BAND_2GHZ]; | 
|  | band->n_channels = ARRAY_SIZE(ath10k_2ghz_channels); | 
|  | band->channels = channels; | 
|  |  | 
|  | if (ar->hw_params.cck_rate_map_rev2) { | 
|  | band->n_bitrates = ath10k_g_rates_rev2_size; | 
|  | band->bitrates = ath10k_g_rates_rev2; | 
|  | } else { | 
|  | band->n_bitrates = ath10k_g_rates_size; | 
|  | band->bitrates = ath10k_g_rates; | 
|  | } | 
|  |  | 
|  | ar->hw->wiphy->bands[NL80211_BAND_2GHZ] = band; | 
|  | } | 
|  |  | 
|  | if (ar->phy_capability & WHAL_WLAN_11A_CAPABILITY) { | 
|  | channels = kmemdup(ath10k_5ghz_channels, | 
|  | sizeof(ath10k_5ghz_channels), | 
|  | GFP_KERNEL); | 
|  | if (!channels) { | 
|  | ret = -ENOMEM; | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | band = &ar->mac.sbands[NL80211_BAND_5GHZ]; | 
|  | band->n_channels = ARRAY_SIZE(ath10k_5ghz_channels); | 
|  | band->channels = channels; | 
|  | band->n_bitrates = ath10k_a_rates_size; | 
|  | band->bitrates = ath10k_a_rates; | 
|  | ar->hw->wiphy->bands[NL80211_BAND_5GHZ] = band; | 
|  | } | 
|  |  | 
|  | wiphy_read_of_freq_limits(ar->hw->wiphy); | 
|  | ath10k_mac_setup_ht_vht_cap(ar); | 
|  |  | 
|  | ar->hw->wiphy->interface_modes = | 
|  | BIT(NL80211_IFTYPE_STATION) | | 
|  | BIT(NL80211_IFTYPE_AP) | | 
|  | BIT(NL80211_IFTYPE_MESH_POINT); | 
|  |  | 
|  | ar->hw->wiphy->available_antennas_rx = ar->cfg_rx_chainmask; | 
|  | ar->hw->wiphy->available_antennas_tx = ar->cfg_tx_chainmask; | 
|  |  | 
|  | if (!test_bit(ATH10K_FW_FEATURE_NO_P2P, ar->normal_mode_fw.fw_file.fw_features)) | 
|  | ar->hw->wiphy->interface_modes |= | 
|  | BIT(NL80211_IFTYPE_P2P_DEVICE) | | 
|  | BIT(NL80211_IFTYPE_P2P_CLIENT) | | 
|  | BIT(NL80211_IFTYPE_P2P_GO); | 
|  |  | 
|  | ieee80211_hw_set(ar->hw, SIGNAL_DBM); | 
|  |  | 
|  | if (!test_bit(ATH10K_FW_FEATURE_NO_PS, | 
|  | ar->running_fw->fw_file.fw_features)) { | 
|  | ieee80211_hw_set(ar->hw, SUPPORTS_PS); | 
|  | ieee80211_hw_set(ar->hw, SUPPORTS_DYNAMIC_PS); | 
|  | } | 
|  |  | 
|  | ieee80211_hw_set(ar->hw, MFP_CAPABLE); | 
|  | ieee80211_hw_set(ar->hw, REPORTS_TX_ACK_STATUS); | 
|  | ieee80211_hw_set(ar->hw, HAS_RATE_CONTROL); | 
|  | ieee80211_hw_set(ar->hw, AP_LINK_PS); | 
|  | ieee80211_hw_set(ar->hw, SPECTRUM_MGMT); | 
|  | ieee80211_hw_set(ar->hw, SUPPORT_FAST_XMIT); | 
|  | ieee80211_hw_set(ar->hw, CONNECTION_MONITOR); | 
|  | ieee80211_hw_set(ar->hw, SUPPORTS_PER_STA_GTK); | 
|  | ieee80211_hw_set(ar->hw, WANT_MONITOR_VIF); | 
|  | ieee80211_hw_set(ar->hw, CHANCTX_STA_CSA); | 
|  | ieee80211_hw_set(ar->hw, QUEUE_CONTROL); | 
|  | ieee80211_hw_set(ar->hw, SUPPORTS_TX_FRAG); | 
|  | ieee80211_hw_set(ar->hw, REPORTS_LOW_ACK); | 
|  |  | 
|  | if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) | 
|  | ieee80211_hw_set(ar->hw, SW_CRYPTO_CONTROL); | 
|  |  | 
|  | ar->hw->wiphy->features |= NL80211_FEATURE_STATIC_SMPS; | 
|  | ar->hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; | 
|  |  | 
|  | if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) | 
|  | ar->hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS; | 
|  |  | 
|  | if (ar->ht_cap_info & WMI_HT_CAP_ENABLED) { | 
|  | ieee80211_hw_set(ar->hw, AMPDU_AGGREGATION); | 
|  | ieee80211_hw_set(ar->hw, TX_AMPDU_SETUP_IN_HW); | 
|  | } | 
|  |  | 
|  | ar->hw->wiphy->max_scan_ssids = WLAN_SCAN_PARAMS_MAX_SSID; | 
|  | ar->hw->wiphy->max_scan_ie_len = WLAN_SCAN_PARAMS_MAX_IE_LEN; | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_NLO, ar->wmi.svc_map)) { | 
|  | ar->hw->wiphy->max_sched_scan_reqs = 1; | 
|  | ar->hw->wiphy->max_sched_scan_ssids = WMI_PNO_MAX_SUPP_NETWORKS; | 
|  | ar->hw->wiphy->max_match_sets = WMI_PNO_MAX_SUPP_NETWORKS; | 
|  | ar->hw->wiphy->max_sched_scan_ie_len = WMI_PNO_MAX_IE_LENGTH; | 
|  | ar->hw->wiphy->max_sched_scan_plans = WMI_PNO_MAX_SCHED_SCAN_PLANS; | 
|  | ar->hw->wiphy->max_sched_scan_plan_interval = | 
|  | WMI_PNO_MAX_SCHED_SCAN_PLAN_INT; | 
|  | ar->hw->wiphy->max_sched_scan_plan_iterations = | 
|  | WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS; | 
|  | } | 
|  |  | 
|  | ar->hw->vif_data_size = sizeof(struct ath10k_vif); | 
|  | ar->hw->sta_data_size = sizeof(struct ath10k_sta); | 
|  | ar->hw->txq_data_size = sizeof(struct ath10k_txq); | 
|  |  | 
|  | ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL; | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map)) { | 
|  | ar->hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD; | 
|  |  | 
|  | /* Firmware delivers WPS/P2P Probe Requests frames to driver so | 
|  | * that userspace (e.g. wpa_supplicant/hostapd) can generate | 
|  | * correct Probe Responses. This is more of a hack advert.. | 
|  | */ | 
|  | ar->hw->wiphy->probe_resp_offload |= | 
|  | NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS | | 
|  | NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 | | 
|  | NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P; | 
|  | } | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_TDLS, ar->wmi.svc_map) || | 
|  | test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, ar->wmi.svc_map)) { | 
|  | ar->hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_TDLS; | 
|  | if (test_bit(WMI_SERVICE_TDLS_WIDER_BANDWIDTH, ar->wmi.svc_map)) | 
|  | ieee80211_hw_set(ar->hw, TDLS_WIDER_BW); | 
|  | } | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, ar->wmi.svc_map)) | 
|  | ieee80211_hw_set(ar->hw, SUPPORTS_TDLS_BUFFER_STA); | 
|  |  | 
|  | ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; | 
|  | ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH; | 
|  | ar->hw->wiphy->max_remain_on_channel_duration = 5000; | 
|  |  | 
|  | ar->hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD; | 
|  | ar->hw->wiphy->features |= NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE | | 
|  | NL80211_FEATURE_AP_SCAN; | 
|  |  | 
|  | ar->hw->wiphy->max_ap_assoc_sta = ar->max_num_stations; | 
|  |  | 
|  | ret = ath10k_wow_init(ar); | 
|  | if (ret) { | 
|  | ath10k_warn(ar, "failed to init wow: %d\n", ret); | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_VHT_IBSS); | 
|  | wiphy_ext_feature_set(ar->hw->wiphy, | 
|  | NL80211_EXT_FEATURE_SET_SCAN_DWELL); | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_TX_DATA_ACK_RSSI, ar->wmi.svc_map) || | 
|  | test_bit(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, ar->wmi.svc_map)) | 
|  | wiphy_ext_feature_set(ar->hw->wiphy, | 
|  | NL80211_EXT_FEATURE_ACK_SIGNAL_SUPPORT); | 
|  |  | 
|  | if (ath10k_peer_stats_enabled(ar) || | 
|  | test_bit(WMI_SERVICE_REPORT_AIRTIME, ar->wmi.svc_map)) | 
|  | wiphy_ext_feature_set(ar->hw->wiphy, | 
|  | NL80211_EXT_FEATURE_AIRTIME_FAIRNESS); | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_RTT_RESPONDER_ROLE, ar->wmi.svc_map)) | 
|  | wiphy_ext_feature_set(ar->hw->wiphy, | 
|  | NL80211_EXT_FEATURE_ENABLE_FTM_RESPONDER); | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_TX_PWR_PER_PEER, ar->wmi.svc_map)) | 
|  | wiphy_ext_feature_set(ar->hw->wiphy, | 
|  | NL80211_EXT_FEATURE_STA_TX_PWR); | 
|  | /* | 
|  | * on LL hardware queues are managed entirely by the FW | 
|  | * so we only advertise to mac we can do the queues thing | 
|  | */ | 
|  | ar->hw->queues = IEEE80211_MAX_QUEUES; | 
|  |  | 
|  | /* vdev_ids are used as hw queue numbers. Make sure offchan tx queue is | 
|  | * something that vdev_ids can't reach so that we don't stop the queue | 
|  | * accidentally. | 
|  | */ | 
|  | ar->hw->offchannel_tx_hw_queue = IEEE80211_MAX_QUEUES - 1; | 
|  |  | 
|  | switch (ar->running_fw->fw_file.wmi_op_version) { | 
|  | case ATH10K_FW_WMI_OP_VERSION_MAIN: | 
|  | ar->hw->wiphy->iface_combinations = ath10k_if_comb; | 
|  | ar->hw->wiphy->n_iface_combinations = | 
|  | ARRAY_SIZE(ath10k_if_comb); | 
|  | ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC); | 
|  | break; | 
|  | case ATH10K_FW_WMI_OP_VERSION_TLV: | 
|  | if (test_bit(WMI_SERVICE_ADAPTIVE_OCS, ar->wmi.svc_map)) { | 
|  | ar->hw->wiphy->iface_combinations = | 
|  | ath10k_tlv_qcs_if_comb; | 
|  | ar->hw->wiphy->n_iface_combinations = | 
|  | ARRAY_SIZE(ath10k_tlv_qcs_if_comb); | 
|  | } else { | 
|  | ar->hw->wiphy->iface_combinations = ath10k_tlv_if_comb; | 
|  | ar->hw->wiphy->n_iface_combinations = | 
|  | ARRAY_SIZE(ath10k_tlv_if_comb); | 
|  | } | 
|  | ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC); | 
|  | break; | 
|  | case ATH10K_FW_WMI_OP_VERSION_10_1: | 
|  | case ATH10K_FW_WMI_OP_VERSION_10_2: | 
|  | case ATH10K_FW_WMI_OP_VERSION_10_2_4: | 
|  | ar->hw->wiphy->iface_combinations = ath10k_10x_if_comb; | 
|  | ar->hw->wiphy->n_iface_combinations = | 
|  | ARRAY_SIZE(ath10k_10x_if_comb); | 
|  | break; | 
|  | case ATH10K_FW_WMI_OP_VERSION_10_4: | 
|  | ar->hw->wiphy->iface_combinations = ath10k_10_4_if_comb; | 
|  | ar->hw->wiphy->n_iface_combinations = | 
|  | ARRAY_SIZE(ath10k_10_4_if_comb); | 
|  | if (test_bit(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, | 
|  | ar->wmi.svc_map)) { | 
|  | ar->hw->wiphy->iface_combinations = | 
|  | ath10k_10_4_bcn_int_if_comb; | 
|  | ar->hw->wiphy->n_iface_combinations = | 
|  | ARRAY_SIZE(ath10k_10_4_bcn_int_if_comb); | 
|  | } | 
|  | break; | 
|  | case ATH10K_FW_WMI_OP_VERSION_UNSET: | 
|  | case ATH10K_FW_WMI_OP_VERSION_MAX: | 
|  | WARN_ON(1); | 
|  | ret = -EINVAL; | 
|  | goto err_free; | 
|  | } | 
|  |  | 
|  | if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) | 
|  | ar->hw->netdev_features = NETIF_F_HW_CSUM; | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED)) { | 
|  | /* Init ath dfs pattern detector */ | 
|  | ar->ath_common.debug_mask = ATH_DBG_DFS; | 
|  | ar->dfs_detector = dfs_pattern_detector_init(&ar->ath_common, | 
|  | NL80211_DFS_UNSET); | 
|  |  | 
|  | if (!ar->dfs_detector) | 
|  | ath10k_warn(ar, "failed to initialise DFS pattern detector\n"); | 
|  | } | 
|  |  | 
|  | ret = ath10k_mac_init_rd(ar); | 
|  | if (ret) { | 
|  | ath10k_err(ar, "failed to derive regdom: %d\n", ret); | 
|  | goto err_dfs_detector_exit; | 
|  | } | 
|  |  | 
|  | /* Disable set_coverage_class for chipsets that do not support it. */ | 
|  | if (!ar->hw_params.hw_ops->set_coverage_class) | 
|  | ar->ops->set_coverage_class = NULL; | 
|  |  | 
|  | ret = ath_regd_init(&ar->ath_common.regulatory, ar->hw->wiphy, | 
|  | ath10k_reg_notifier); | 
|  | if (ret) { | 
|  | ath10k_err(ar, "failed to initialise regulatory: %i\n", ret); | 
|  | goto err_dfs_detector_exit; | 
|  | } | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_SPOOF_MAC_SUPPORT, ar->wmi.svc_map)) { | 
|  | ar->hw->wiphy->features |= | 
|  | NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR; | 
|  | } | 
|  |  | 
|  | ar->hw->wiphy->cipher_suites = cipher_suites; | 
|  |  | 
|  | /* QCA988x and QCA6174 family chips do not support CCMP-256, GCMP-128 | 
|  | * and GCMP-256 ciphers in hardware. Fetch number of ciphers supported | 
|  | * from chip specific hw_param table. | 
|  | */ | 
|  | if (!ar->hw_params.n_cipher_suites || | 
|  | ar->hw_params.n_cipher_suites > ARRAY_SIZE(cipher_suites)) { | 
|  | ath10k_err(ar, "invalid hw_params.n_cipher_suites %d\n", | 
|  | ar->hw_params.n_cipher_suites); | 
|  | ar->hw_params.n_cipher_suites = 8; | 
|  | } | 
|  | ar->hw->wiphy->n_cipher_suites = ar->hw_params.n_cipher_suites; | 
|  |  | 
|  | wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); | 
|  |  | 
|  | ar->hw->weight_multiplier = ATH10K_AIRTIME_WEIGHT_MULTIPLIER; | 
|  |  | 
|  | ret = ieee80211_register_hw(ar->hw); | 
|  | if (ret) { | 
|  | ath10k_err(ar, "failed to register ieee80211: %d\n", ret); | 
|  | goto err_dfs_detector_exit; | 
|  | } | 
|  |  | 
|  | if (test_bit(WMI_SERVICE_PER_PACKET_SW_ENCRYPT, ar->wmi.svc_map)) { | 
|  | ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN); | 
|  | ar->hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN); | 
|  | } | 
|  |  | 
|  | if (!ath_is_world_regd(&ar->ath_common.regulatory)) { | 
|  | ret = regulatory_hint(ar->hw->wiphy, | 
|  | ar->ath_common.regulatory.alpha2); | 
|  | if (ret) | 
|  | goto err_unregister; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_unregister: | 
|  | ieee80211_unregister_hw(ar->hw); | 
|  |  | 
|  | err_dfs_detector_exit: | 
|  | if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) | 
|  | ar->dfs_detector->exit(ar->dfs_detector); | 
|  |  | 
|  | err_free: | 
|  | kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels); | 
|  | kfree(ar->mac.sbands[NL80211_BAND_5GHZ].channels); | 
|  |  | 
|  | SET_IEEE80211_DEV(ar->hw, NULL); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void ath10k_mac_unregister(struct ath10k *ar) | 
|  | { | 
|  | ieee80211_unregister_hw(ar->hw); | 
|  |  | 
|  | if (IS_ENABLED(CONFIG_ATH10K_DFS_CERTIFIED) && ar->dfs_detector) | 
|  | ar->dfs_detector->exit(ar->dfs_detector); | 
|  |  | 
|  | kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels); | 
|  | kfree(ar->mac.sbands[NL80211_BAND_5GHZ].channels); | 
|  |  | 
|  | SET_IEEE80211_DEV(ar->hw, NULL); | 
|  | } |