drivers/media/dvb-frontends/s921.c - kernel/common - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  *   Sharp VA3A5JZ921 One Seg Broadcast Module driver
  *   This device is labeled as just S. 921 at the top of the frontend can
  *
  *   Copyright (C) 2009-2010 Mauro Carvalho Chehab
  *   Copyright (C) 2009-2010 Douglas Landgraf <[email protected]>
  *
  *   Developed for Leadership SBTVD 1seg device sold in Brazil
  *
  *   Frontend module based on cx24123 driver, getting some info from
  *	the old s921 driver.
  *
  *   FIXME: Need to port to DVB v5.2 API
  */

 #include <linux/kernel.h>
 #include <asm/div64.h>

 #include <media/dvb_frontend.h>
 #include "s921.h"

 static int debug = 1;
 module_param(debug, int, 0644);
 MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");

 #define rc(args...)  do {						\
 	printk(KERN_ERR  "s921: " args);				\
 } while (0)

 #define dprintk(args...)						\
 	do {								\
 		if (debug) {						\
 			printk(KERN_DEBUG "s921: %s: ", __func__);	\
 			printk(args);					\
 		}							\
 	} while (0)

 struct s921_state {
 	struct i2c_adapter *i2c;
 	const struct s921_config *config;

 	struct dvb_frontend frontend;

 	/* The Demod can't easily provide these, we cache them */
 	u32 currentfreq;
 };

 /*
  * Various tuner defaults need to be established for a given frequency kHz.
  * fixme: The bounds on the bands do not match the doc in real life.
  * fixme: Some of them have been moved, other might need adjustment.
  */
 static struct s921_bandselect_val {
 	u32 freq_low;
 	u8  band_reg;
 } s921_bandselect[] = {
 	{         0, 0x7b },
 	{ 485140000, 0x5b },
 	{ 515140000, 0x3b },
 	{ 545140000, 0x1b },
 	{ 599140000, 0xfb },
 	{ 623140000, 0xdb },
 	{ 659140000, 0xbb },
 	{ 713140000, 0x9b },
 };

 struct regdata {
 	u8 reg;
 	u8 data;
 };

 static struct regdata s921_init[] = {
 	{ 0x01, 0x80 },		/* Probably, a reset sequence */
 	{ 0x01, 0x40 },
 	{ 0x01, 0x80 },
 	{ 0x01, 0x40 },

 	{ 0x02, 0x00 },
 	{ 0x03, 0x40 },
 	{ 0x04, 0x01 },
 	{ 0x05, 0x00 },
 	{ 0x06, 0x00 },
 	{ 0x07, 0x00 },
 	{ 0x08, 0x00 },
 	{ 0x09, 0x00 },
 	{ 0x0a, 0x00 },
 	{ 0x0b, 0x5a },
 	{ 0x0c, 0x00 },
 	{ 0x0d, 0x00 },
 	{ 0x0f, 0x00 },
 	{ 0x13, 0x1b },
 	{ 0x14, 0x80 },
 	{ 0x15, 0x40 },
 	{ 0x17, 0x70 },
 	{ 0x18, 0x01 },
 	{ 0x19, 0x12 },
 	{ 0x1a, 0x01 },
 	{ 0x1b, 0x12 },
 	{ 0x1c, 0xa0 },
 	{ 0x1d, 0x00 },
 	{ 0x1e, 0x0a },
 	{ 0x1f, 0x08 },
 	{ 0x20, 0x40 },
 	{ 0x21, 0xff },
 	{ 0x22, 0x4c },
 	{ 0x23, 0x4e },
 	{ 0x24, 0x4c },
 	{ 0x25, 0x00 },
 	{ 0x26, 0x00 },
 	{ 0x27, 0xf4 },
 	{ 0x28, 0x60 },
 	{ 0x29, 0x88 },
 	{ 0x2a, 0x40 },
 	{ 0x2b, 0x40 },
 	{ 0x2c, 0xff },
 	{ 0x2d, 0x00 },
 	{ 0x2e, 0xff },
 	{ 0x2f, 0x00 },
 	{ 0x30, 0x20 },
 	{ 0x31, 0x06 },
 	{ 0x32, 0x0c },
 	{ 0x34, 0x0f },
 	{ 0x37, 0xfe },
 	{ 0x38, 0x00 },
 	{ 0x39, 0x63 },
 	{ 0x3a, 0x10 },
 	{ 0x3b, 0x10 },
 	{ 0x47, 0x00 },
 	{ 0x49, 0xe5 },
 	{ 0x4b, 0x00 },
 	{ 0x50, 0xc0 },
 	{ 0x52, 0x20 },
 	{ 0x54, 0x5a },
 	{ 0x55, 0x5b },
 	{ 0x56, 0x40 },
 	{ 0x57, 0x70 },
 	{ 0x5c, 0x50 },
 	{ 0x5d, 0x00 },
 	{ 0x62, 0x17 },
 	{ 0x63, 0x2f },
 	{ 0x64, 0x6f },
 	{ 0x68, 0x00 },
 	{ 0x69, 0x89 },
 	{ 0x6a, 0x00 },
 	{ 0x6b, 0x00 },
 	{ 0x6c, 0x00 },
 	{ 0x6d, 0x00 },
 	{ 0x6e, 0x00 },
 	{ 0x70, 0x10 },
 	{ 0x71, 0x00 },
 	{ 0x75, 0x00 },
 	{ 0x76, 0x30 },
 	{ 0x77, 0x01 },
 	{ 0xaf, 0x00 },
 	{ 0xb0, 0xa0 },
 	{ 0xb2, 0x3d },
 	{ 0xb3, 0x25 },
 	{ 0xb4, 0x8b },
 	{ 0xb5, 0x4b },
 	{ 0xb6, 0x3f },
 	{ 0xb7, 0xff },
 	{ 0xb8, 0xff },
 	{ 0xb9, 0xfc },
 	{ 0xba, 0x00 },
 	{ 0xbb, 0x00 },
 	{ 0xbc, 0x00 },
 	{ 0xd0, 0x30 },
 	{ 0xe4, 0x84 },
 	{ 0xf0, 0x48 },
 	{ 0xf1, 0x19 },
 	{ 0xf2, 0x5a },
 	{ 0xf3, 0x8e },
 	{ 0xf4, 0x2d },
 	{ 0xf5, 0x07 },
 	{ 0xf6, 0x5a },
 	{ 0xf7, 0xba },
 	{ 0xf8, 0xd7 },
 };

 static struct regdata s921_prefreq[] = {
 	{ 0x47, 0x60 },
 	{ 0x68, 0x00 },
 	{ 0x69, 0x89 },
 	{ 0xf0, 0x48 },
 	{ 0xf1, 0x19 },
 };

 static struct regdata s921_postfreq[] = {
 	{ 0xf5, 0xae },
 	{ 0xf6, 0xb7 },
 	{ 0xf7, 0xba },
 	{ 0xf8, 0xd7 },
 	{ 0x68, 0x0a },
 	{ 0x69, 0x09 },
 };

 static int s921_i2c_writereg(struct s921_state *state,
 			     u8 i2c_addr, int reg, int data)
 {
 	u8 buf[] = { reg, data };
 	struct i2c_msg msg = {
 		.addr = i2c_addr, .flags = 0, .buf = buf, .len = 2
 	};
 	int rc;

 	rc = i2c_transfer(state->i2c, &msg, 1);
 	if (rc != 1) {
 		printk("%s: writereg rcor(rc == %i, reg == 0x%02x, data == 0x%02x)\n",
 		       __func__, rc, reg, data);
 		return rc;
 	}

 	return 0;
 }

 static int s921_i2c_writeregdata(struct s921_state *state, u8 i2c_addr,
 				 struct regdata *rd, int size)
 {
 	int i, rc;

 	for (i = 0; i < size; i++) {
 		rc = s921_i2c_writereg(state, i2c_addr, rd[i].reg, rd[i].data);
 		if (rc < 0)
 			return rc;
 	}
 	return 0;
 }

 static int s921_i2c_readreg(struct s921_state *state, u8 i2c_addr, u8 reg)
 {
 	u8 val;
 	int rc;
 	struct i2c_msg msg[] = {
 		{ .addr = i2c_addr, .flags = 0, .buf = &reg, .len = 1 },
 		{ .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
 	};

 	rc = i2c_transfer(state->i2c, msg, 2);

 	if (rc != 2) {
 		rc("%s: reg=0x%x (rcor=%d)\n", __func__, reg, rc);
 		return rc;
 	}

 	return val;
 }

 #define s921_readreg(state, reg) \
 	s921_i2c_readreg(state, state->config->demod_address, reg)
 #define s921_writereg(state, reg, val) \
 	s921_i2c_writereg(state, state->config->demod_address, reg, val)
 #define s921_writeregdata(state, regdata) \
 	s921_i2c_writeregdata(state, state->config->demod_address, \
 	regdata, ARRAY_SIZE(regdata))

 static int s921_pll_tune(struct dvb_frontend *fe)
 {
 	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 	struct s921_state *state = fe->demodulator_priv;
 	int band, rc, i;
 	unsigned long f_offset;
 	u8 f_switch;
 	u64 offset;

 	dprintk("frequency=%i\n", p->frequency);

 	for (band = 0; band < ARRAY_SIZE(s921_bandselect); band++)
 		if (p->frequency < s921_bandselect[band].freq_low)
 			break;
 	band--;

 	if (band < 0) {
 		rc("%s: frequency out of range\n", __func__);
 		return -EINVAL;
 	}

 	f_switch = s921_bandselect[band].band_reg;

 	offset = ((u64)p->frequency) * 258;
 	do_div(offset, 6000000);
 	f_offset = ((unsigned long)offset) + 2321;

 	rc = s921_writeregdata(state, s921_prefreq);
 	if (rc < 0)
 		return rc;

 	rc = s921_writereg(state, 0xf2, (f_offset >> 8) & 0xff);
 	if (rc < 0)
 		return rc;

 	rc = s921_writereg(state, 0xf3, f_offset & 0xff);
 	if (rc < 0)
 		return rc;

 	rc = s921_writereg(state, 0xf4, f_switch);
 	if (rc < 0)
 		return rc;

 	rc = s921_writeregdata(state, s921_postfreq);
 	if (rc < 0)
 		return rc;

 	for (i = 0 ; i < 6; i++) {
 		rc = s921_readreg(state, 0x80);
 		dprintk("status 0x80: %02x\n", rc);
 	}
 	rc = s921_writereg(state, 0x01, 0x40);
 	if (rc < 0)
 		return rc;

 	rc = s921_readreg(state, 0x01);
 	dprintk("status 0x01: %02x\n", rc);

 	rc = s921_readreg(state, 0x80);
 	dprintk("status 0x80: %02x\n", rc);

 	rc = s921_readreg(state, 0x80);
 	dprintk("status 0x80: %02x\n", rc);

 	rc = s921_readreg(state, 0x32);
 	dprintk("status 0x32: %02x\n", rc);

 	dprintk("pll tune band=%d, pll=%d\n", f_switch, (int)f_offset);

 	return 0;
 }

 static int s921_initfe(struct dvb_frontend *fe)
 {
 	struct s921_state *state = fe->demodulator_priv;
 	int rc;

 	dprintk("\n");

 	rc = s921_writeregdata(state, s921_init);
 	if (rc < 0)
 		return rc;

 	return 0;
 }

 static int s921_read_status(struct dvb_frontend *fe, enum fe_status *status)
 {
 	struct s921_state *state = fe->demodulator_priv;
 	int regstatus, rc;

 	*status = 0;

 	rc = s921_readreg(state, 0x81);
 	if (rc < 0)
 		return rc;

 	regstatus = rc << 8;

 	rc = s921_readreg(state, 0x82);
 	if (rc < 0)
 		return rc;

 	regstatus |= rc;

 	dprintk("status = %04x\n", regstatus);

 	/* Full Sync - We don't know what each bit means on regs 0x81/0x82 */
 	if ((regstatus & 0xff) == 0x40) {
 		*status = FE_HAS_SIGNAL  |
 			  FE_HAS_CARRIER |
 			  FE_HAS_VITERBI |
 			  FE_HAS_SYNC    |
 			  FE_HAS_LOCK;
 	} else if (regstatus & 0x40) {
 		/* This is close to Full Sync, but not enough to get useful info */
 		*status = FE_HAS_SIGNAL  |
 			  FE_HAS_CARRIER |
 			  FE_HAS_VITERBI |
 			  FE_HAS_SYNC;
 	}

 	return 0;
 }

 static int s921_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
 {
 	enum fe_status	status;
 	struct s921_state *state = fe->demodulator_priv;
 	int rc;

 	/* FIXME: Use the proper register for it... 0x80? */
 	rc = s921_read_status(fe, &status);
 	if (rc < 0)
 		return rc;

 	*strength = (status & FE_HAS_LOCK) ? 0xffff : 0;

 	dprintk("strength = 0x%04x\n", *strength);

 	rc = s921_readreg(state, 0x01);
 	dprintk("status 0x01: %02x\n", rc);

 	rc = s921_readreg(state, 0x80);
 	dprintk("status 0x80: %02x\n", rc);

 	rc = s921_readreg(state, 0x32);
 	dprintk("status 0x32: %02x\n", rc);

 	return 0;
 }

 static int s921_set_frontend(struct dvb_frontend *fe)
 {
 	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
 	struct s921_state *state = fe->demodulator_priv;
 	int rc;

 	dprintk("\n");

 	/* FIXME: We don't know how to use non-auto mode */

 	rc = s921_pll_tune(fe);
 	if (rc < 0)
 		return rc;

 	state->currentfreq = p->frequency;

 	return 0;
 }

 static int s921_get_frontend(struct dvb_frontend *fe,
 			     struct dtv_frontend_properties *p)
 {
 	struct s921_state *state = fe->demodulator_priv;

 	/* FIXME: Probably it is possible to get it from regs f1 and f2 */
 	p->frequency = state->currentfreq;
 	p->delivery_system = SYS_ISDBT;

 	return 0;
 }

 static int s921_tune(struct dvb_frontend *fe,
 			bool re_tune,
 			unsigned int mode_flags,
 			unsigned int *delay,
 			enum fe_status *status)
 {
 	int rc = 0;

 	dprintk("\n");

 	if (re_tune)
 		rc = s921_set_frontend(fe);

 	if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
 		s921_read_status(fe, status);

 	return rc;
 }

 static enum dvbfe_algo s921_get_algo(struct dvb_frontend *fe)
 {
 	return DVBFE_ALGO_HW;
 }

 static void s921_release(struct dvb_frontend *fe)
 {
 	struct s921_state *state = fe->demodulator_priv;

 	dprintk("\n");
 	kfree(state);
 }

 static const struct dvb_frontend_ops s921_ops;

 struct dvb_frontend *s921_attach(const struct s921_config *config,
 				    struct i2c_adapter *i2c)
 {
 	/* allocate memory for the internal state */
 	struct s921_state *state =
 		kzalloc(sizeof(struct s921_state), GFP_KERNEL);

 	dprintk("\n");
 	if (!state) {
 		rc("Unable to kzalloc\n");
 		return NULL;
 	}

 	/* setup the state */
 	state->config = config;
 	state->i2c = i2c;

 	/* create dvb_frontend */
 	memcpy(&state->frontend.ops, &s921_ops,
 		sizeof(struct dvb_frontend_ops));
 	state->frontend.demodulator_priv = state;

 	return &state->frontend;
 }
 EXPORT_SYMBOL_GPL(s921_attach);

 static const struct dvb_frontend_ops s921_ops = {
 	.delsys = { SYS_ISDBT },
 	/* Use dib8000 values per default */
 	.info = {
 		.name = "Sharp S921",
 		.frequency_min_hz = 470 * MHz,
 		/*
 		 * Max should be 770MHz instead, according with Sharp docs,
 		 * but Leadership doc says it works up to 806 MHz. This is
 		 * required to get channel 69, used in Brazil
 		 */
 		.frequency_max_hz = 806 * MHz,
 		.caps =  FE_CAN_INVERSION_AUTO |
 			 FE_CAN_FEC_1_2  | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
 			 FE_CAN_FEC_5_6  | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
 			 FE_CAN_QPSK     | FE_CAN_QAM_16 | FE_CAN_QAM_64 |
 			 FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO |
 			 FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_RECOVER |
 			 FE_CAN_HIERARCHY_AUTO,
 	},

 	.release = s921_release,

 	.init = s921_initfe,
 	.set_frontend = s921_set_frontend,
 	.get_frontend = s921_get_frontend,
 	.read_status = s921_read_status,
 	.read_signal_strength = s921_read_signal_strength,
 	.tune = s921_tune,
 	.get_frontend_algo = s921_get_algo,
 };

 MODULE_DESCRIPTION("DVB Frontend module for Sharp S921 hardware");
 MODULE_AUTHOR("Mauro Carvalho Chehab");
 MODULE_AUTHOR("Douglas Landgraf <[email protected]>");
 MODULE_LICENSE("GPL");
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* Sharp VA3A5JZ921 One Seg Broadcast Module driver
	* This device is labeled as just S. 921 at the top of the frontend can
	*
	* Copyright (C) 2009-2010 Mauro Carvalho Chehab
	* Copyright (C) 2009-2010 Douglas Landgraf <[email protected]>
	*
	* Developed for Leadership SBTVD 1seg device sold in Brazil
	*
	* Frontend module based on cx24123 driver, getting some info from
	* the old s921 driver.
	*
	* FIXME: Need to port to DVB v5.2 API
	*/

	#include <linux/kernel.h>
	#include <asm/div64.h>

	#include <media/dvb_frontend.h>
	#include "s921.h"

	static int debug = 1;
	module_param(debug, int, 0644);
	MODULE_PARM_DESC(debug, "Activates frontend debugging (default:0)");

	#define rc(args...) do { \
	printk(KERN_ERR "s921: " args); \
	} while (0)

	#define dprintk(args...) \
	do { \
	if (debug) { \
	printk(KERN_DEBUG "s921: %s: ", __func__); \
	printk(args); \
	} \
	} while (0)

	struct s921_state {
	struct i2c_adapter *i2c;
	const struct s921_config *config;

	struct dvb_frontend frontend;

	/* The Demod can't easily provide these, we cache them */
	u32 currentfreq;
	};

	/*
	* Various tuner defaults need to be established for a given frequency kHz.
	* fixme: The bounds on the bands do not match the doc in real life.
	* fixme: Some of them have been moved, other might need adjustment.
	*/
	static struct s921_bandselect_val {
	u32 freq_low;
	u8 band_reg;
	} s921_bandselect[] = {
	{ 0, 0x7b },
	{ 485140000, 0x5b },
	{ 515140000, 0x3b },
	{ 545140000, 0x1b },
	{ 599140000, 0xfb },
	{ 623140000, 0xdb },
	{ 659140000, 0xbb },
	{ 713140000, 0x9b },
	};

	struct regdata {
	u8 reg;
	u8 data;
	};

	static struct regdata s921_init[] = {
	{ 0x01, 0x80 }, /* Probably, a reset sequence */
	{ 0x01, 0x40 },
	{ 0x01, 0x80 },
	{ 0x01, 0x40 },

	{ 0x02, 0x00 },
	{ 0x03, 0x40 },
	{ 0x04, 0x01 },
	{ 0x05, 0x00 },
	{ 0x06, 0x00 },
	{ 0x07, 0x00 },
	{ 0x08, 0x00 },
	{ 0x09, 0x00 },
	{ 0x0a, 0x00 },
	{ 0x0b, 0x5a },
	{ 0x0c, 0x00 },
	{ 0x0d, 0x00 },
	{ 0x0f, 0x00 },
	{ 0x13, 0x1b },
	{ 0x14, 0x80 },
	{ 0x15, 0x40 },
	{ 0x17, 0x70 },
	{ 0x18, 0x01 },
	{ 0x19, 0x12 },
	{ 0x1a, 0x01 },
	{ 0x1b, 0x12 },
	{ 0x1c, 0xa0 },
	{ 0x1d, 0x00 },
	{ 0x1e, 0x0a },
	{ 0x1f, 0x08 },
	{ 0x20, 0x40 },
	{ 0x21, 0xff },
	{ 0x22, 0x4c },
	{ 0x23, 0x4e },
	{ 0x24, 0x4c },
	{ 0x25, 0x00 },
	{ 0x26, 0x00 },
	{ 0x27, 0xf4 },
	{ 0x28, 0x60 },
	{ 0x29, 0x88 },
	{ 0x2a, 0x40 },
	{ 0x2b, 0x40 },
	{ 0x2c, 0xff },
	{ 0x2d, 0x00 },
	{ 0x2e, 0xff },
	{ 0x2f, 0x00 },
	{ 0x30, 0x20 },
	{ 0x31, 0x06 },
	{ 0x32, 0x0c },
	{ 0x34, 0x0f },
	{ 0x37, 0xfe },
	{ 0x38, 0x00 },
	{ 0x39, 0x63 },
	{ 0x3a, 0x10 },
	{ 0x3b, 0x10 },
	{ 0x47, 0x00 },
	{ 0x49, 0xe5 },
	{ 0x4b, 0x00 },
	{ 0x50, 0xc0 },
	{ 0x52, 0x20 },
	{ 0x54, 0x5a },
	{ 0x55, 0x5b },
	{ 0x56, 0x40 },
	{ 0x57, 0x70 },
	{ 0x5c, 0x50 },
	{ 0x5d, 0x00 },
	{ 0x62, 0x17 },
	{ 0x63, 0x2f },
	{ 0x64, 0x6f },
	{ 0x68, 0x00 },
	{ 0x69, 0x89 },
	{ 0x6a, 0x00 },
	{ 0x6b, 0x00 },
	{ 0x6c, 0x00 },
	{ 0x6d, 0x00 },
	{ 0x6e, 0x00 },
	{ 0x70, 0x10 },
	{ 0x71, 0x00 },
	{ 0x75, 0x00 },
	{ 0x76, 0x30 },
	{ 0x77, 0x01 },
	{ 0xaf, 0x00 },
	{ 0xb0, 0xa0 },
	{ 0xb2, 0x3d },
	{ 0xb3, 0x25 },
	{ 0xb4, 0x8b },
	{ 0xb5, 0x4b },
	{ 0xb6, 0x3f },
	{ 0xb7, 0xff },
	{ 0xb8, 0xff },
	{ 0xb9, 0xfc },
	{ 0xba, 0x00 },
	{ 0xbb, 0x00 },
	{ 0xbc, 0x00 },
	{ 0xd0, 0x30 },
	{ 0xe4, 0x84 },
	{ 0xf0, 0x48 },
	{ 0xf1, 0x19 },
	{ 0xf2, 0x5a },
	{ 0xf3, 0x8e },
	{ 0xf4, 0x2d },
	{ 0xf5, 0x07 },
	{ 0xf6, 0x5a },
	{ 0xf7, 0xba },
	{ 0xf8, 0xd7 },
	};

	static struct regdata s921_prefreq[] = {
	{ 0x47, 0x60 },
	{ 0x68, 0x00 },
	{ 0x69, 0x89 },
	{ 0xf0, 0x48 },
	{ 0xf1, 0x19 },
	};

	static struct regdata s921_postfreq[] = {
	{ 0xf5, 0xae },
	{ 0xf6, 0xb7 },
	{ 0xf7, 0xba },
	{ 0xf8, 0xd7 },
	{ 0x68, 0x0a },
	{ 0x69, 0x09 },
	};

	static int s921_i2c_writereg(struct s921_state *state,
	u8 i2c_addr, int reg, int data)
	{
	u8 buf[] = { reg, data };
	struct i2c_msg msg = {
	.addr = i2c_addr, .flags = 0, .buf = buf, .len = 2
	};
	int rc;

	rc = i2c_transfer(state->i2c, &msg, 1);
	if (rc != 1) {
	printk("%s: writereg rcor(rc == %i, reg == 0x%02x, data == 0x%02x)\n",
	__func__, rc, reg, data);
	return rc;
	}

	return 0;
	}

	static int s921_i2c_writeregdata(struct s921_state *state, u8 i2c_addr,
	struct regdata *rd, int size)
	{
	int i, rc;

	for (i = 0; i < size; i++) {
	rc = s921_i2c_writereg(state, i2c_addr, rd[i].reg, rd[i].data);
	if (rc < 0)
	return rc;
	}
	return 0;
	}

	static int s921_i2c_readreg(struct s921_state *state, u8 i2c_addr, u8 reg)
	{
	u8 val;
	int rc;
	struct i2c_msg msg[] = {
	{ .addr = i2c_addr, .flags = 0, .buf = &reg, .len = 1 },
	{ .addr = i2c_addr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
	};

	rc = i2c_transfer(state->i2c, msg, 2);

	if (rc != 2) {
	rc("%s: reg=0x%x (rcor=%d)\n", __func__, reg, rc);
	return rc;
	}

	return val;
	}

	#define s921_readreg(state, reg) \
	s921_i2c_readreg(state, state->config->demod_address, reg)
	#define s921_writereg(state, reg, val) \
	s921_i2c_writereg(state, state->config->demod_address, reg, val)
	#define s921_writeregdata(state, regdata) \
	s921_i2c_writeregdata(state, state->config->demod_address, \
	regdata, ARRAY_SIZE(regdata))

	static int s921_pll_tune(struct dvb_frontend *fe)
	{
	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
	struct s921_state *state = fe->demodulator_priv;
	int band, rc, i;
	unsigned long f_offset;
	u8 f_switch;
	u64 offset;

	dprintk("frequency=%i\n", p->frequency);

	for (band = 0; band < ARRAY_SIZE(s921_bandselect); band++)
	if (p->frequency < s921_bandselect[band].freq_low)
	break;
	band--;

	if (band < 0) {
	rc("%s: frequency out of range\n", __func__);
	return -EINVAL;
	}

	f_switch = s921_bandselect[band].band_reg;

	offset = ((u64)p->frequency) * 258;
	do_div(offset, 6000000);
	f_offset = ((unsigned long)offset) + 2321;

	rc = s921_writeregdata(state, s921_prefreq);
	if (rc < 0)
	return rc;

	rc = s921_writereg(state, 0xf2, (f_offset >> 8) & 0xff);
	if (rc < 0)
	return rc;

	rc = s921_writereg(state, 0xf3, f_offset & 0xff);
	if (rc < 0)
	return rc;

	rc = s921_writereg(state, 0xf4, f_switch);
	if (rc < 0)
	return rc;

	rc = s921_writeregdata(state, s921_postfreq);
	if (rc < 0)
	return rc;

	for (i = 0 ; i < 6; i++) {
	rc = s921_readreg(state, 0x80);
	dprintk("status 0x80: %02x\n", rc);
	}
	rc = s921_writereg(state, 0x01, 0x40);
	if (rc < 0)
	return rc;

	rc = s921_readreg(state, 0x01);
	dprintk("status 0x01: %02x\n", rc);

	rc = s921_readreg(state, 0x80);
	dprintk("status 0x80: %02x\n", rc);

	rc = s921_readreg(state, 0x80);
	dprintk("status 0x80: %02x\n", rc);

	rc = s921_readreg(state, 0x32);
	dprintk("status 0x32: %02x\n", rc);

	dprintk("pll tune band=%d, pll=%d\n", f_switch, (int)f_offset);

	return 0;
	}

	static int s921_initfe(struct dvb_frontend *fe)
	{
	struct s921_state *state = fe->demodulator_priv;
	int rc;

	dprintk("\n");

	rc = s921_writeregdata(state, s921_init);
	if (rc < 0)
	return rc;

	return 0;
	}

	static int s921_read_status(struct dvb_frontend fe, enum fe_status status)
	{
	struct s921_state *state = fe->demodulator_priv;
	int regstatus, rc;

	*status = 0;

	rc = s921_readreg(state, 0x81);
	if (rc < 0)
	return rc;

	regstatus = rc << 8;

	rc = s921_readreg(state, 0x82);
	if (rc < 0)
	return rc;

	regstatus \|= rc;

	dprintk("status = %04x\n", regstatus);

	/* Full Sync - We don't know what each bit means on regs 0x81/0x82 */
	if ((regstatus & 0xff) == 0x40) {
	*status = FE_HAS_SIGNAL \|
	FE_HAS_CARRIER \|
	FE_HAS_VITERBI \|
	FE_HAS_SYNC \|
	FE_HAS_LOCK;
	} else if (regstatus & 0x40) {
	/* This is close to Full Sync, but not enough to get useful info */
	*status = FE_HAS_SIGNAL \|
	FE_HAS_CARRIER \|
	FE_HAS_VITERBI \|
	FE_HAS_SYNC;
	}

	return 0;
	}

	static int s921_read_signal_strength(struct dvb_frontend fe, u16 strength)
	{
	enum fe_status status;
	struct s921_state *state = fe->demodulator_priv;
	int rc;

	/* FIXME: Use the proper register for it... 0x80? */
	rc = s921_read_status(fe, &status);
	if (rc < 0)
	return rc;

	*strength = (status & FE_HAS_LOCK) ? 0xffff : 0;

	dprintk("strength = 0x%04x\n", *strength);

	rc = s921_readreg(state, 0x01);
	dprintk("status 0x01: %02x\n", rc);

	rc = s921_readreg(state, 0x80);
	dprintk("status 0x80: %02x\n", rc);

	rc = s921_readreg(state, 0x32);
	dprintk("status 0x32: %02x\n", rc);

	return 0;
	}

	static int s921_set_frontend(struct dvb_frontend *fe)
	{
	struct dtv_frontend_properties *p = &fe->dtv_property_cache;
	struct s921_state *state = fe->demodulator_priv;
	int rc;

	dprintk("\n");

	/* FIXME: We don't know how to use non-auto mode */

	rc = s921_pll_tune(fe);
	if (rc < 0)
	return rc;

	state->currentfreq = p->frequency;

	return 0;
	}

	static int s921_get_frontend(struct dvb_frontend *fe,
	struct dtv_frontend_properties *p)
	{
	struct s921_state *state = fe->demodulator_priv;

	/* FIXME: Probably it is possible to get it from regs f1 and f2 */
	p->frequency = state->currentfreq;
	p->delivery_system = SYS_ISDBT;

	return 0;
	}

	static int s921_tune(struct dvb_frontend *fe,
	bool re_tune,
	unsigned int mode_flags,
	unsigned int *delay,
	enum fe_status *status)
	{
	int rc = 0;

	dprintk("\n");

	if (re_tune)
	rc = s921_set_frontend(fe);

	if (!(mode_flags & FE_TUNE_MODE_ONESHOT))
	s921_read_status(fe, status);

	return rc;
	}

	static enum dvbfe_algo s921_get_algo(struct dvb_frontend *fe)
	{
	return DVBFE_ALGO_HW;
	}

	static void s921_release(struct dvb_frontend *fe)
	{
	struct s921_state *state = fe->demodulator_priv;

	dprintk("\n");
	kfree(state);
	}

	static const struct dvb_frontend_ops s921_ops;

	struct dvb_frontend s921_attach(const struct s921_config config,
	struct i2c_adapter *i2c)
	{
	/* allocate memory for the internal state */
	struct s921_state *state =
	kzalloc(sizeof(struct s921_state), GFP_KERNEL);

	dprintk("\n");
	if (!state) {
	rc("Unable to kzalloc\n");
	return NULL;
	}

	/* setup the state */
	state->config = config;
	state->i2c = i2c;

	/* create dvb_frontend */
	memcpy(&state->frontend.ops, &s921_ops,
	sizeof(struct dvb_frontend_ops));
	state->frontend.demodulator_priv = state;

	return &state->frontend;
	}
	EXPORT_SYMBOL_GPL(s921_attach);

	static const struct dvb_frontend_ops s921_ops = {
	.delsys = { SYS_ISDBT },
	/* Use dib8000 values per default */
	.info = {
	.name = "Sharp S921",
	.frequency_min_hz = 470 * MHz,
	/*
	* Max should be 770MHz instead, according with Sharp docs,
	* but Leadership doc says it works up to 806 MHz. This is
	* required to get channel 69, used in Brazil
	*/
	.frequency_max_hz = 806 * MHz,
	.caps = FE_CAN_INVERSION_AUTO \|
	FE_CAN_FEC_1_2 \| FE_CAN_FEC_2_3 \| FE_CAN_FEC_3_4 \|
	FE_CAN_FEC_5_6 \| FE_CAN_FEC_7_8 \| FE_CAN_FEC_AUTO \|
	FE_CAN_QPSK \| FE_CAN_QAM_16 \| FE_CAN_QAM_64 \|
	FE_CAN_QAM_AUTO \| FE_CAN_TRANSMISSION_MODE_AUTO \|
	FE_CAN_GUARD_INTERVAL_AUTO \| FE_CAN_RECOVER \|
	FE_CAN_HIERARCHY_AUTO,
	},

	.release = s921_release,

	.init = s921_initfe,
	.set_frontend = s921_set_frontend,
	.get_frontend = s921_get_frontend,
	.read_status = s921_read_status,
	.read_signal_strength = s921_read_signal_strength,
	.tune = s921_tune,
	.get_frontend_algo = s921_get_algo,
	};

	MODULE_DESCRIPTION("DVB Frontend module for Sharp S921 hardware");
	MODULE_AUTHOR("Mauro Carvalho Chehab");
	MODULE_AUTHOR("Douglas Landgraf <[email protected]>");
	MODULE_LICENSE("GPL");