|  | /* | 
|  | * Regulator driver for tps65090 power management chip. | 
|  | * | 
|  | * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved. | 
|  |  | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms and conditions of the GNU General Public License, | 
|  | * version 2, as published by the Free Software Foundation. | 
|  |  | 
|  | * This program is distributed in the hope it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  |  | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program.  If not, see <http://www.gnu.org/licenses/> | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/of_gpio.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/regulator/driver.h> | 
|  | #include <linux/regulator/machine.h> | 
|  | #include <linux/regulator/of_regulator.h> | 
|  | #include <linux/mfd/tps65090.h> | 
|  |  | 
|  | #define MAX_CTRL_READ_TRIES	5 | 
|  | #define MAX_FET_ENABLE_TRIES	1000 | 
|  |  | 
|  | #define CTRL_EN_BIT		0 /* Regulator enable bit, active high */ | 
|  | #define CTRL_WT_BIT		2 /* Regulator wait time 0 bit */ | 
|  | #define CTRL_PG_BIT		4 /* Regulator power good bit, 1=good */ | 
|  | #define CTRL_TO_BIT		7 /* Regulator timeout bit, 1=wait */ | 
|  |  | 
|  | #define MAX_OVERCURRENT_WAIT	3 /* Overcurrent wait must be <= this */ | 
|  |  | 
|  | /** | 
|  | * struct tps65090_regulator - Per-regulator data for a tps65090 regulator | 
|  | * | 
|  | * @dev: Pointer to our device. | 
|  | * @desc: The struct regulator_desc for the regulator. | 
|  | * @rdev: The struct regulator_dev for the regulator. | 
|  | * @overcurrent_wait_valid: True if overcurrent_wait is valid. | 
|  | * @overcurrent_wait: For FETs, the value to put in the WTFET bitfield. | 
|  | */ | 
|  |  | 
|  | struct tps65090_regulator { | 
|  | struct device		*dev; | 
|  | struct regulator_desc	*desc; | 
|  | struct regulator_dev	*rdev; | 
|  | bool			overcurrent_wait_valid; | 
|  | int			overcurrent_wait; | 
|  | }; | 
|  |  | 
|  | static struct regulator_ops tps65090_ext_control_ops = { | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * tps65090_reg_set_overcurrent_wait - Setup overcurrent wait | 
|  | * | 
|  | * This will set the overcurrent wait time based on what's in the regulator | 
|  | * info. | 
|  | * | 
|  | * @ri:		Overall regulator data | 
|  | * @rdev:	Regulator device | 
|  | * | 
|  | * Return: 0 if no error, non-zero if there was an error writing the register. | 
|  | */ | 
|  | static int tps65090_reg_set_overcurrent_wait(struct tps65090_regulator *ri, | 
|  | struct regulator_dev *rdev) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, | 
|  | MAX_OVERCURRENT_WAIT << CTRL_WT_BIT, | 
|  | ri->overcurrent_wait << CTRL_WT_BIT); | 
|  | if (ret) { | 
|  | dev_err(&rdev->dev, "Error updating overcurrent wait %#x\n", | 
|  | rdev->desc->enable_reg); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tps65090_try_enable_fet - Try to enable a FET | 
|  | * | 
|  | * @rdev:	Regulator device | 
|  | * | 
|  | * Return: 0 if ok, -ENOTRECOVERABLE if the FET power good bit did not get | 
|  | * set, or some other -ve value if another error occurred (e.g. i2c error) | 
|  | */ | 
|  | static int tps65090_try_enable_fet(struct regulator_dev *rdev) | 
|  | { | 
|  | unsigned int control; | 
|  | int ret, i; | 
|  |  | 
|  | ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, | 
|  | rdev->desc->enable_mask, | 
|  | rdev->desc->enable_mask); | 
|  | if (ret < 0) { | 
|  | dev_err(&rdev->dev, "Error in updating reg %#x\n", | 
|  | rdev->desc->enable_reg); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < MAX_CTRL_READ_TRIES; i++) { | 
|  | ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, | 
|  | &control); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | if (!(control & BIT(CTRL_TO_BIT))) | 
|  | break; | 
|  |  | 
|  | usleep_range(1000, 1500); | 
|  | } | 
|  | if (!(control & BIT(CTRL_PG_BIT))) | 
|  | return -ENOTRECOVERABLE; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * tps65090_fet_enable - Enable a FET, trying a few times if it fails | 
|  | * | 
|  | * Some versions of the tps65090 have issues when turning on the FETs. | 
|  | * This function goes through several steps to ensure the best chance of the | 
|  | * FET going on.  Specifically: | 
|  | * - We'll make sure that we bump the "overcurrent wait" to the maximum, which | 
|  | *   increases the chances that we'll turn on properly. | 
|  | * - We'll retry turning the FET on multiple times (turning off in between). | 
|  | * | 
|  | * @rdev:	Regulator device | 
|  | * | 
|  | * Return: 0 if ok, non-zero if it fails. | 
|  | */ | 
|  | static int tps65090_fet_enable(struct regulator_dev *rdev) | 
|  | { | 
|  | int ret, tries; | 
|  |  | 
|  | /* | 
|  | * Try enabling multiple times until we succeed since sometimes the | 
|  | * first try times out. | 
|  | */ | 
|  | tries = 0; | 
|  | while (true) { | 
|  | ret = tps65090_try_enable_fet(rdev); | 
|  | if (!ret) | 
|  | break; | 
|  | if (ret != -ENOTRECOVERABLE || tries == MAX_FET_ENABLE_TRIES) | 
|  | goto err; | 
|  |  | 
|  | /* Try turning the FET off (and then on again) */ | 
|  | ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, | 
|  | rdev->desc->enable_mask, 0); | 
|  | if (ret) | 
|  | goto err; | 
|  |  | 
|  | tries++; | 
|  | } | 
|  |  | 
|  | if (tries) | 
|  | dev_warn(&rdev->dev, "reg %#x enable ok after %d tries\n", | 
|  | rdev->desc->enable_reg, tries); | 
|  |  | 
|  | return 0; | 
|  | err: | 
|  | dev_warn(&rdev->dev, "reg %#x enable failed\n", rdev->desc->enable_reg); | 
|  | WARN_ON(1); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct regulator_ops tps65090_reg_control_ops = { | 
|  | .enable		= regulator_enable_regmap, | 
|  | .disable	= regulator_disable_regmap, | 
|  | .is_enabled	= regulator_is_enabled_regmap, | 
|  | }; | 
|  |  | 
|  | static struct regulator_ops tps65090_fet_control_ops = { | 
|  | .enable		= tps65090_fet_enable, | 
|  | .disable	= regulator_disable_regmap, | 
|  | .is_enabled	= regulator_is_enabled_regmap, | 
|  | }; | 
|  |  | 
|  | static struct regulator_ops tps65090_ldo_ops = { | 
|  | }; | 
|  |  | 
|  | #define tps65090_REG_DESC(_id, _sname, _en_reg, _en_bits, _nvolt, _volt, _ops) \ | 
|  | {							\ | 
|  | .name = "TPS65090_RAILS"#_id,			\ | 
|  | .supply_name = _sname,				\ | 
|  | .id = TPS65090_REGULATOR_##_id,			\ | 
|  | .n_voltages = _nvolt,				\ | 
|  | .ops = &_ops,					\ | 
|  | .fixed_uV = _volt,				\ | 
|  | .enable_reg = _en_reg,				\ | 
|  | .enable_val = _en_bits,				\ | 
|  | .enable_mask = _en_bits,			\ | 
|  | .type = REGULATOR_VOLTAGE,			\ | 
|  | .owner = THIS_MODULE,				\ | 
|  | } | 
|  |  | 
|  | #define tps65090_REG_FIXEDV(_id, _sname, en_reg, _en_bits, _volt, _ops) \ | 
|  | tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 1, _volt, _ops) | 
|  |  | 
|  | #define tps65090_REG_SWITCH(_id, _sname, en_reg, _en_bits, _ops) \ | 
|  | tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 0, 0, _ops) | 
|  |  | 
|  | static struct regulator_desc tps65090_regulator_desc[] = { | 
|  | tps65090_REG_FIXEDV(DCDC1, "vsys1",   0x0C, BIT(CTRL_EN_BIT), 5000000, | 
|  | tps65090_reg_control_ops), | 
|  | tps65090_REG_FIXEDV(DCDC2, "vsys2",   0x0D, BIT(CTRL_EN_BIT), 3300000, | 
|  | tps65090_reg_control_ops), | 
|  | tps65090_REG_SWITCH(DCDC3, "vsys3",   0x0E, BIT(CTRL_EN_BIT), | 
|  | tps65090_reg_control_ops), | 
|  |  | 
|  | tps65090_REG_SWITCH(FET1,  "infet1",  0x0F, | 
|  | BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), | 
|  | tps65090_fet_control_ops), | 
|  | tps65090_REG_SWITCH(FET2,  "infet2",  0x10, | 
|  | BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), | 
|  | tps65090_fet_control_ops), | 
|  | tps65090_REG_SWITCH(FET3,  "infet3",  0x11, | 
|  | BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), | 
|  | tps65090_fet_control_ops), | 
|  | tps65090_REG_SWITCH(FET4,  "infet4",  0x12, | 
|  | BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), | 
|  | tps65090_fet_control_ops), | 
|  | tps65090_REG_SWITCH(FET5,  "infet5",  0x13, | 
|  | BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), | 
|  | tps65090_fet_control_ops), | 
|  | tps65090_REG_SWITCH(FET6,  "infet6",  0x14, | 
|  | BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), | 
|  | tps65090_fet_control_ops), | 
|  | tps65090_REG_SWITCH(FET7,  "infet7",  0x15, | 
|  | BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT), | 
|  | tps65090_fet_control_ops), | 
|  |  | 
|  | tps65090_REG_FIXEDV(LDO1,  "vsys-l1", 0, 0, 5000000, | 
|  | tps65090_ldo_ops), | 
|  | tps65090_REG_FIXEDV(LDO2,  "vsys-l2", 0, 0, 3300000, | 
|  | tps65090_ldo_ops), | 
|  | }; | 
|  |  | 
|  | static inline bool is_dcdc(int id) | 
|  | { | 
|  | switch (id) { | 
|  | case TPS65090_REGULATOR_DCDC1: | 
|  | case TPS65090_REGULATOR_DCDC2: | 
|  | case TPS65090_REGULATOR_DCDC3: | 
|  | return true; | 
|  | default: | 
|  | return false; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int tps65090_config_ext_control( | 
|  | struct tps65090_regulator *ri, bool enable) | 
|  | { | 
|  | int ret; | 
|  | struct device *parent = ri->dev->parent; | 
|  | unsigned int reg_en_reg = ri->desc->enable_reg; | 
|  |  | 
|  | if (enable) | 
|  | ret = tps65090_set_bits(parent, reg_en_reg, 1); | 
|  | else | 
|  | ret =  tps65090_clr_bits(parent, reg_en_reg, 1); | 
|  | if (ret < 0) | 
|  | dev_err(ri->dev, "Error in updating reg 0x%x\n", reg_en_reg); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int tps65090_regulator_disable_ext_control( | 
|  | struct tps65090_regulator *ri, | 
|  | struct tps65090_regulator_plat_data *tps_pdata) | 
|  | { | 
|  | int ret = 0; | 
|  | struct device *parent = ri->dev->parent; | 
|  | unsigned int reg_en_reg = ri->desc->enable_reg; | 
|  |  | 
|  | /* | 
|  | * First enable output for internal control if require. | 
|  | * And then disable external control. | 
|  | */ | 
|  | if (tps_pdata->reg_init_data->constraints.always_on || | 
|  | tps_pdata->reg_init_data->constraints.boot_on) { | 
|  | ret =  tps65090_set_bits(parent, reg_en_reg, 0); | 
|  | if (ret < 0) { | 
|  | dev_err(ri->dev, "Error in set reg 0x%x\n", reg_en_reg); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | return tps65090_config_ext_control(ri, false); | 
|  | } | 
|  |  | 
|  | static void tps65090_configure_regulator_config( | 
|  | struct tps65090_regulator_plat_data *tps_pdata, | 
|  | struct regulator_config *config) | 
|  | { | 
|  | if (gpio_is_valid(tps_pdata->gpio)) { | 
|  | int gpio_flag = GPIOF_OUT_INIT_LOW; | 
|  |  | 
|  | if (tps_pdata->reg_init_data->constraints.always_on || | 
|  | tps_pdata->reg_init_data->constraints.boot_on) | 
|  | gpio_flag = GPIOF_OUT_INIT_HIGH; | 
|  |  | 
|  | config->ena_gpio = tps_pdata->gpio; | 
|  | config->ena_gpio_initialized = true; | 
|  | config->ena_gpio_flags = gpio_flag; | 
|  | } else { | 
|  | config->ena_gpio = -EINVAL; | 
|  | config->ena_gpio_initialized = false; | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | static struct of_regulator_match tps65090_matches[] = { | 
|  | { .name = "dcdc1", }, | 
|  | { .name = "dcdc2", }, | 
|  | { .name = "dcdc3", }, | 
|  | { .name = "fet1",  }, | 
|  | { .name = "fet2",  }, | 
|  | { .name = "fet3",  }, | 
|  | { .name = "fet4",  }, | 
|  | { .name = "fet5",  }, | 
|  | { .name = "fet6",  }, | 
|  | { .name = "fet7",  }, | 
|  | { .name = "ldo1",  }, | 
|  | { .name = "ldo2",  }, | 
|  | }; | 
|  |  | 
|  | static struct tps65090_platform_data *tps65090_parse_dt_reg_data( | 
|  | struct platform_device *pdev, | 
|  | struct of_regulator_match **tps65090_reg_matches) | 
|  | { | 
|  | struct tps65090_platform_data *tps65090_pdata; | 
|  | struct device_node *np = pdev->dev.parent->of_node; | 
|  | struct device_node *regulators; | 
|  | int idx = 0, ret; | 
|  | struct tps65090_regulator_plat_data *reg_pdata; | 
|  |  | 
|  | tps65090_pdata = devm_kzalloc(&pdev->dev, sizeof(*tps65090_pdata), | 
|  | GFP_KERNEL); | 
|  | if (!tps65090_pdata) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | reg_pdata = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX * | 
|  | sizeof(*reg_pdata), GFP_KERNEL); | 
|  | if (!reg_pdata) | 
|  | return ERR_PTR(-ENOMEM); | 
|  |  | 
|  | regulators = of_get_child_by_name(np, "regulators"); | 
|  | if (!regulators) { | 
|  | dev_err(&pdev->dev, "regulator node not found\n"); | 
|  | return ERR_PTR(-ENODEV); | 
|  | } | 
|  |  | 
|  | ret = of_regulator_match(&pdev->dev, regulators, tps65090_matches, | 
|  | ARRAY_SIZE(tps65090_matches)); | 
|  | of_node_put(regulators); | 
|  | if (ret < 0) { | 
|  | dev_err(&pdev->dev, | 
|  | "Error parsing regulator init data: %d\n", ret); | 
|  | return ERR_PTR(ret); | 
|  | } | 
|  |  | 
|  | *tps65090_reg_matches = tps65090_matches; | 
|  | for (idx = 0; idx < ARRAY_SIZE(tps65090_matches); idx++) { | 
|  | struct regulator_init_data *ri_data; | 
|  | struct tps65090_regulator_plat_data *rpdata; | 
|  |  | 
|  | rpdata = ®_pdata[idx]; | 
|  | ri_data = tps65090_matches[idx].init_data; | 
|  | if (!ri_data || !tps65090_matches[idx].of_node) | 
|  | continue; | 
|  |  | 
|  | rpdata->reg_init_data = ri_data; | 
|  | rpdata->enable_ext_control = of_property_read_bool( | 
|  | tps65090_matches[idx].of_node, | 
|  | "ti,enable-ext-control"); | 
|  | if (rpdata->enable_ext_control) | 
|  | rpdata->gpio = of_get_named_gpio(np, | 
|  | "dcdc-ext-control-gpios", 0); | 
|  |  | 
|  | if (of_property_read_u32(tps65090_matches[idx].of_node, | 
|  | "ti,overcurrent-wait", | 
|  | &rpdata->overcurrent_wait) == 0) | 
|  | rpdata->overcurrent_wait_valid = true; | 
|  |  | 
|  | tps65090_pdata->reg_pdata[idx] = rpdata; | 
|  | } | 
|  | return tps65090_pdata; | 
|  | } | 
|  | #else | 
|  | static inline struct tps65090_platform_data *tps65090_parse_dt_reg_data( | 
|  | struct platform_device *pdev, | 
|  | struct of_regulator_match **tps65090_reg_matches) | 
|  | { | 
|  | *tps65090_reg_matches = NULL; | 
|  | return NULL; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static int tps65090_regulator_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct tps65090 *tps65090_mfd = dev_get_drvdata(pdev->dev.parent); | 
|  | struct tps65090_regulator *ri = NULL; | 
|  | struct regulator_config config = { }; | 
|  | struct regulator_dev *rdev; | 
|  | struct tps65090_regulator_plat_data *tps_pdata; | 
|  | struct tps65090_regulator *pmic; | 
|  | struct tps65090_platform_data *tps65090_pdata; | 
|  | struct of_regulator_match *tps65090_reg_matches = NULL; | 
|  | int num; | 
|  | int ret; | 
|  |  | 
|  | dev_dbg(&pdev->dev, "Probing regulator\n"); | 
|  |  | 
|  | tps65090_pdata = dev_get_platdata(pdev->dev.parent); | 
|  | if (!tps65090_pdata && tps65090_mfd->dev->of_node) | 
|  | tps65090_pdata = tps65090_parse_dt_reg_data(pdev, | 
|  | &tps65090_reg_matches); | 
|  | if (IS_ERR_OR_NULL(tps65090_pdata)) { | 
|  | dev_err(&pdev->dev, "Platform data missing\n"); | 
|  | return tps65090_pdata ? PTR_ERR(tps65090_pdata) : -EINVAL; | 
|  | } | 
|  |  | 
|  | pmic = devm_kzalloc(&pdev->dev, TPS65090_REGULATOR_MAX * sizeof(*pmic), | 
|  | GFP_KERNEL); | 
|  | if (!pmic) | 
|  | return -ENOMEM; | 
|  |  | 
|  | for (num = 0; num < TPS65090_REGULATOR_MAX; num++) { | 
|  | tps_pdata = tps65090_pdata->reg_pdata[num]; | 
|  |  | 
|  | ri = &pmic[num]; | 
|  | ri->dev = &pdev->dev; | 
|  | ri->desc = &tps65090_regulator_desc[num]; | 
|  | if (tps_pdata) { | 
|  | ri->overcurrent_wait_valid = | 
|  | tps_pdata->overcurrent_wait_valid; | 
|  | ri->overcurrent_wait = tps_pdata->overcurrent_wait; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * TPS5090 DCDC support the control from external digital input. | 
|  | * Configure it as per platform data. | 
|  | */ | 
|  | if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data) { | 
|  | if (tps_pdata->enable_ext_control) { | 
|  | tps65090_configure_regulator_config( | 
|  | tps_pdata, &config); | 
|  | ri->desc->ops = &tps65090_ext_control_ops; | 
|  | } else { | 
|  | ret = tps65090_regulator_disable_ext_control( | 
|  | ri, tps_pdata); | 
|  | if (ret < 0) { | 
|  | dev_err(&pdev->dev, | 
|  | "failed disable ext control\n"); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | config.dev = pdev->dev.parent; | 
|  | config.driver_data = ri; | 
|  | config.regmap = tps65090_mfd->rmap; | 
|  | if (tps_pdata) | 
|  | config.init_data = tps_pdata->reg_init_data; | 
|  | else | 
|  | config.init_data = NULL; | 
|  | if (tps65090_reg_matches) | 
|  | config.of_node = tps65090_reg_matches[num].of_node; | 
|  | else | 
|  | config.of_node = NULL; | 
|  |  | 
|  | rdev = devm_regulator_register(&pdev->dev, ri->desc, &config); | 
|  | if (IS_ERR(rdev)) { | 
|  | dev_err(&pdev->dev, "failed to register regulator %s\n", | 
|  | ri->desc->name); | 
|  | return PTR_ERR(rdev); | 
|  | } | 
|  | ri->rdev = rdev; | 
|  |  | 
|  | if (ri->overcurrent_wait_valid) { | 
|  | ret = tps65090_reg_set_overcurrent_wait(ri, rdev); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Enable external control if it is require */ | 
|  | if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data && | 
|  | tps_pdata->enable_ext_control) { | 
|  | ret = tps65090_config_ext_control(ri, true); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, pmic); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver tps65090_regulator_driver = { | 
|  | .driver	= { | 
|  | .name	= "tps65090-pmic", | 
|  | }, | 
|  | .probe		= tps65090_regulator_probe, | 
|  | }; | 
|  |  | 
|  | static int __init tps65090_regulator_init(void) | 
|  | { | 
|  | return platform_driver_register(&tps65090_regulator_driver); | 
|  | } | 
|  | subsys_initcall(tps65090_regulator_init); | 
|  |  | 
|  | static void __exit tps65090_regulator_exit(void) | 
|  | { | 
|  | platform_driver_unregister(&tps65090_regulator_driver); | 
|  | } | 
|  | module_exit(tps65090_regulator_exit); | 
|  |  | 
|  | MODULE_DESCRIPTION("tps65090 regulator driver"); | 
|  | MODULE_AUTHOR("Venu Byravarasu <[email protected]>"); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_ALIAS("platform:tps65090-pmic"); |