|  | /* | 
|  | * linux/drivers/pcmcia/pxa2xx_trizeps4.c | 
|  | * | 
|  | * TRIZEPS PCMCIA specific routines. | 
|  | * | 
|  | * Author:	Jürgen Schindele | 
|  | * Created:	20 02, 2006 | 
|  | * Copyright:	Jürgen Schindele | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/platform_device.h> | 
|  |  | 
|  | #include <asm/mach-types.h> | 
|  | #include <asm/irq.h> | 
|  |  | 
|  | #include <mach/pxa2xx-regs.h> | 
|  | #include <mach/trizeps4.h> | 
|  |  | 
|  | #include "soc_common.h" | 
|  |  | 
|  | extern void board_pcmcia_power(int power); | 
|  |  | 
|  | static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt) | 
|  | { | 
|  | /* we dont have voltage/card/ready detection | 
|  | * so we dont need interrupts for it | 
|  | */ | 
|  | switch (skt->nr) { | 
|  | case 0: | 
|  | skt->stat[SOC_STAT_CD].gpio = GPIO_PCD; | 
|  | skt->stat[SOC_STAT_CD].name = "cs0_cd"; | 
|  | skt->stat[SOC_STAT_RDY].gpio = GPIO_PRDY; | 
|  | skt->stat[SOC_STAT_RDY].name = "cs0_rdy"; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | /* release the reset of this card */ | 
|  | pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->socket.pci_irq); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static unsigned long trizeps_pcmcia_status[2]; | 
|  |  | 
|  | static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt, | 
|  | struct pcmcia_state *state) | 
|  | { | 
|  | unsigned short status = 0, change; | 
|  | status = CFSR_readw(); | 
|  | change = (status ^ trizeps_pcmcia_status[skt->nr]) & | 
|  | ConXS_CFSR_BVD_MASK; | 
|  | if (change) { | 
|  | trizeps_pcmcia_status[skt->nr] = status; | 
|  | if (status & ConXS_CFSR_BVD1) { | 
|  | /* enable_irq empty */ | 
|  | } else { | 
|  | /* disable_irq empty */ | 
|  | } | 
|  | } | 
|  |  | 
|  | switch (skt->nr) { | 
|  | case 0: | 
|  | /* just fill in fix states */ | 
|  | state->bvd1   = (status & ConXS_CFSR_BVD1) ? 1 : 0; | 
|  | state->bvd2   = (status & ConXS_CFSR_BVD2) ? 1 : 0; | 
|  | state->vs_3v  = (status & ConXS_CFSR_VS1) ? 0 : 1; | 
|  | state->vs_Xv  = (status & ConXS_CFSR_VS2) ? 0 : 1; | 
|  | break; | 
|  |  | 
|  | #ifndef CONFIG_MACH_TRIZEPS_CONXS | 
|  | /* on ConXS we only have one slot. Second is inactive */ | 
|  | case 1: | 
|  | state->detect = 0; | 
|  | state->ready  = 0; | 
|  | state->bvd1   = 0; | 
|  | state->bvd2   = 0; | 
|  | state->vs_3v  = 0; | 
|  | state->vs_Xv  = 0; | 
|  | break; | 
|  |  | 
|  | #endif | 
|  | } | 
|  | } | 
|  |  | 
|  | static int trizeps_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, | 
|  | const socket_state_t *state) | 
|  | { | 
|  | int ret = 0; | 
|  | unsigned short power = 0; | 
|  |  | 
|  | /* we do nothing here just check a bit */ | 
|  | switch (state->Vcc) { | 
|  | case 0:  power &= 0xfc; break; | 
|  | case 33: power |= ConXS_BCR_S0_VCC_3V3; break; | 
|  | case 50: | 
|  | pr_err("%s(): Vcc 5V not supported in socket\n", __func__); | 
|  | break; | 
|  | default: | 
|  | pr_err("%s(): bad Vcc %u\n", __func__, state->Vcc); | 
|  | ret = -1; | 
|  | } | 
|  |  | 
|  | switch (state->Vpp) { | 
|  | case 0:  power &= 0xf3; break; | 
|  | case 33: power |= ConXS_BCR_S0_VPP_3V3; break; | 
|  | case 120: | 
|  | pr_err("%s(): Vpp 12V not supported in socket\n", __func__); | 
|  | break; | 
|  | default: | 
|  | if (state->Vpp != state->Vcc) { | 
|  | pr_err("%s(): bad Vpp %u\n", __func__, state->Vpp); | 
|  | ret = -1; | 
|  | } | 
|  | } | 
|  |  | 
|  | switch (skt->nr) { | 
|  | case 0:			 /* we only have 3.3V */ | 
|  | board_pcmcia_power(power); | 
|  | break; | 
|  |  | 
|  | #ifndef CONFIG_MACH_TRIZEPS_CONXS | 
|  | /* on ConXS we only have one slot. Second is inactive */ | 
|  | case 1: | 
|  | #endif | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void trizeps_pcmcia_socket_init(struct soc_pcmcia_socket *skt) | 
|  | { | 
|  | /* default is on */ | 
|  | board_pcmcia_power(0x9); | 
|  | } | 
|  |  | 
|  | static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) | 
|  | { | 
|  | board_pcmcia_power(0x0); | 
|  | } | 
|  |  | 
|  | static struct pcmcia_low_level trizeps_pcmcia_ops = { | 
|  | .owner			= THIS_MODULE, | 
|  | .hw_init		= trizeps_pcmcia_hw_init, | 
|  | .socket_state		= trizeps_pcmcia_socket_state, | 
|  | .configure_socket	= trizeps_pcmcia_configure_socket, | 
|  | .socket_init		= trizeps_pcmcia_socket_init, | 
|  | .socket_suspend		= trizeps_pcmcia_socket_suspend, | 
|  | #ifdef CONFIG_MACH_TRIZEPS_CONXS | 
|  | .nr			= 1, | 
|  | #else | 
|  | .nr			= 2, | 
|  | #endif | 
|  | .first			= 0, | 
|  | }; | 
|  |  | 
|  | static struct platform_device *trizeps_pcmcia_device; | 
|  |  | 
|  | static int __init trizeps_pcmcia_init(void) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | if (!machine_is_trizeps4() && !machine_is_trizeps4wl()) | 
|  | return -ENODEV; | 
|  |  | 
|  | trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); | 
|  | if (!trizeps_pcmcia_device) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret = platform_device_add_data(trizeps_pcmcia_device, | 
|  | &trizeps_pcmcia_ops, sizeof(trizeps_pcmcia_ops)); | 
|  |  | 
|  | if (ret == 0) | 
|  | ret = platform_device_add(trizeps_pcmcia_device); | 
|  |  | 
|  | if (ret) | 
|  | platform_device_put(trizeps_pcmcia_device); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void __exit trizeps_pcmcia_exit(void) | 
|  | { | 
|  | platform_device_unregister(trizeps_pcmcia_device); | 
|  | } | 
|  |  | 
|  | fs_initcall(trizeps_pcmcia_init); | 
|  | module_exit(trizeps_pcmcia_exit); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_AUTHOR("Juergen Schindele"); | 
|  | MODULE_ALIAS("platform:pxa2xx-pcmcia"); |