|  | // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause | 
|  | /* | 
|  | * Copyright(c) 2015 - 2019 Intel Corporation. | 
|  | */ | 
|  |  | 
|  | #include <linux/net.h> | 
|  | #include <rdma/ib_smi.h> | 
|  |  | 
|  | #include "hfi.h" | 
|  | #include "mad.h" | 
|  | #include "verbs_txreq.h" | 
|  | #include "trace_ibhdrs.h" | 
|  | #include "qp.h" | 
|  |  | 
|  | /* We support only two types - 9B and 16B for now */ | 
|  | static const hfi1_make_req hfi1_make_ud_req_tbl[2] = { | 
|  | [HFI1_PKT_TYPE_9B] = &hfi1_make_ud_req_9B, | 
|  | [HFI1_PKT_TYPE_16B] = &hfi1_make_ud_req_16B | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ud_loopback - handle send on loopback QPs | 
|  | * @sqp: the sending QP | 
|  | * @swqe: the send work request | 
|  | * | 
|  | * This is called from hfi1_make_ud_req() to forward a WQE addressed | 
|  | * to the same HFI. | 
|  | * Note that the receive interrupt handler may be calling hfi1_ud_rcv() | 
|  | * while this is being called. | 
|  | */ | 
|  | static void ud_loopback(struct rvt_qp *sqp, struct rvt_swqe *swqe) | 
|  | { | 
|  | struct hfi1_ibport *ibp = to_iport(sqp->ibqp.device, sqp->port_num); | 
|  | struct hfi1_pportdata *ppd; | 
|  | struct hfi1_qp_priv *priv = sqp->priv; | 
|  | struct rvt_qp *qp; | 
|  | struct rdma_ah_attr *ah_attr; | 
|  | unsigned long flags; | 
|  | struct rvt_sge_state ssge; | 
|  | struct rvt_sge *sge; | 
|  | struct ib_wc wc; | 
|  | u32 length; | 
|  | enum ib_qp_type sqptype, dqptype; | 
|  |  | 
|  | rcu_read_lock(); | 
|  |  | 
|  | qp = rvt_lookup_qpn(ib_to_rvt(sqp->ibqp.device), &ibp->rvp, | 
|  | rvt_get_swqe_remote_qpn(swqe)); | 
|  | if (!qp) { | 
|  | ibp->rvp.n_pkt_drops++; | 
|  | rcu_read_unlock(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | sqptype = sqp->ibqp.qp_type == IB_QPT_GSI ? | 
|  | IB_QPT_UD : sqp->ibqp.qp_type; | 
|  | dqptype = qp->ibqp.qp_type == IB_QPT_GSI ? | 
|  | IB_QPT_UD : qp->ibqp.qp_type; | 
|  |  | 
|  | if (dqptype != sqptype || | 
|  | !(ib_rvt_state_ops[qp->state] & RVT_PROCESS_RECV_OK)) { | 
|  | ibp->rvp.n_pkt_drops++; | 
|  | goto drop; | 
|  | } | 
|  |  | 
|  | ah_attr = rvt_get_swqe_ah_attr(swqe); | 
|  | ppd = ppd_from_ibp(ibp); | 
|  |  | 
|  | if (qp->ibqp.qp_num > 1) { | 
|  | u16 pkey; | 
|  | u32 slid; | 
|  | u8 sc5 = ibp->sl_to_sc[rdma_ah_get_sl(ah_attr)]; | 
|  |  | 
|  | pkey = hfi1_get_pkey(ibp, sqp->s_pkey_index); | 
|  | slid = ppd->lid | (rdma_ah_get_path_bits(ah_attr) & | 
|  | ((1 << ppd->lmc) - 1)); | 
|  | if (unlikely(ingress_pkey_check(ppd, pkey, sc5, | 
|  | qp->s_pkey_index, | 
|  | slid, false))) { | 
|  | hfi1_bad_pkey(ibp, pkey, | 
|  | rdma_ah_get_sl(ah_attr), | 
|  | sqp->ibqp.qp_num, qp->ibqp.qp_num, | 
|  | slid, rdma_ah_get_dlid(ah_attr)); | 
|  | goto drop; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Check that the qkey matches (except for QP0, see 9.6.1.4.1). | 
|  | * Qkeys with the high order bit set mean use the | 
|  | * qkey from the QP context instead of the WR (see 10.2.5). | 
|  | */ | 
|  | if (qp->ibqp.qp_num) { | 
|  | u32 qkey; | 
|  |  | 
|  | qkey = (int)rvt_get_swqe_remote_qkey(swqe) < 0 ? | 
|  | sqp->qkey : rvt_get_swqe_remote_qkey(swqe); | 
|  | if (unlikely(qkey != qp->qkey)) | 
|  | goto drop; /* silently drop per IBTA spec */ | 
|  | } | 
|  |  | 
|  | /* | 
|  | * A GRH is expected to precede the data even if not | 
|  | * present on the wire. | 
|  | */ | 
|  | length = swqe->length; | 
|  | memset(&wc, 0, sizeof(wc)); | 
|  | wc.byte_len = length + sizeof(struct ib_grh); | 
|  |  | 
|  | if (swqe->wr.opcode == IB_WR_SEND_WITH_IMM) { | 
|  | wc.wc_flags = IB_WC_WITH_IMM; | 
|  | wc.ex.imm_data = swqe->wr.ex.imm_data; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&qp->r_lock, flags); | 
|  |  | 
|  | /* | 
|  | * Get the next work request entry to find where to put the data. | 
|  | */ | 
|  | if (qp->r_flags & RVT_R_REUSE_SGE) { | 
|  | qp->r_flags &= ~RVT_R_REUSE_SGE; | 
|  | } else { | 
|  | int ret; | 
|  |  | 
|  | ret = rvt_get_rwqe(qp, false); | 
|  | if (ret < 0) { | 
|  | rvt_rc_error(qp, IB_WC_LOC_QP_OP_ERR); | 
|  | goto bail_unlock; | 
|  | } | 
|  | if (!ret) { | 
|  | if (qp->ibqp.qp_num == 0) | 
|  | ibp->rvp.n_vl15_dropped++; | 
|  | goto bail_unlock; | 
|  | } | 
|  | } | 
|  | /* Silently drop packets which are too big. */ | 
|  | if (unlikely(wc.byte_len > qp->r_len)) { | 
|  | qp->r_flags |= RVT_R_REUSE_SGE; | 
|  | ibp->rvp.n_pkt_drops++; | 
|  | goto bail_unlock; | 
|  | } | 
|  |  | 
|  | if (rdma_ah_get_ah_flags(ah_attr) & IB_AH_GRH) { | 
|  | struct ib_grh grh; | 
|  | struct ib_global_route grd = *(rdma_ah_read_grh(ah_attr)); | 
|  |  | 
|  | /* | 
|  | * For loopback packets with extended LIDs, the | 
|  | * sgid_index in the GRH is 0 and the dgid is | 
|  | * OPA GID of the sender. While creating a response | 
|  | * to the loopback packet, IB core creates the new | 
|  | * sgid_index from the DGID and that will be the | 
|  | * OPA_GID_INDEX. The new dgid is from the sgid | 
|  | * index and that will be in the IB GID format. | 
|  | * | 
|  | * We now have a case where the sent packet had a | 
|  | * different sgid_index and dgid compared to the | 
|  | * one that was received in response. | 
|  | * | 
|  | * Fix this inconsistency. | 
|  | */ | 
|  | if (priv->hdr_type == HFI1_PKT_TYPE_16B) { | 
|  | if (grd.sgid_index == 0) | 
|  | grd.sgid_index = OPA_GID_INDEX; | 
|  |  | 
|  | if (ib_is_opa_gid(&grd.dgid)) | 
|  | grd.dgid.global.interface_id = | 
|  | cpu_to_be64(ppd->guids[HFI1_PORT_GUID_INDEX]); | 
|  | } | 
|  |  | 
|  | hfi1_make_grh(ibp, &grh, &grd, 0, 0); | 
|  | rvt_copy_sge(qp, &qp->r_sge, &grh, | 
|  | sizeof(grh), true, false); | 
|  | wc.wc_flags |= IB_WC_GRH; | 
|  | } else { | 
|  | rvt_skip_sge(&qp->r_sge, sizeof(struct ib_grh), true); | 
|  | } | 
|  | ssge.sg_list = swqe->sg_list + 1; | 
|  | ssge.sge = *swqe->sg_list; | 
|  | ssge.num_sge = swqe->wr.num_sge; | 
|  | sge = &ssge.sge; | 
|  | while (length) { | 
|  | u32 len = rvt_get_sge_length(sge, length); | 
|  |  | 
|  | WARN_ON_ONCE(len == 0); | 
|  | rvt_copy_sge(qp, &qp->r_sge, sge->vaddr, len, true, false); | 
|  | rvt_update_sge(&ssge, len, false); | 
|  | length -= len; | 
|  | } | 
|  | rvt_put_ss(&qp->r_sge); | 
|  | if (!test_and_clear_bit(RVT_R_WRID_VALID, &qp->r_aflags)) | 
|  | goto bail_unlock; | 
|  | wc.wr_id = qp->r_wr_id; | 
|  | wc.status = IB_WC_SUCCESS; | 
|  | wc.opcode = IB_WC_RECV; | 
|  | wc.qp = &qp->ibqp; | 
|  | wc.src_qp = sqp->ibqp.qp_num; | 
|  | if (qp->ibqp.qp_type == IB_QPT_GSI || qp->ibqp.qp_type == IB_QPT_SMI) { | 
|  | if (sqp->ibqp.qp_type == IB_QPT_GSI || | 
|  | sqp->ibqp.qp_type == IB_QPT_SMI) | 
|  | wc.pkey_index = rvt_get_swqe_pkey_index(swqe); | 
|  | else | 
|  | wc.pkey_index = sqp->s_pkey_index; | 
|  | } else { | 
|  | wc.pkey_index = 0; | 
|  | } | 
|  | wc.slid = (ppd->lid | (rdma_ah_get_path_bits(ah_attr) & | 
|  | ((1 << ppd->lmc) - 1))) & U16_MAX; | 
|  | /* Check for loopback when the port lid is not set */ | 
|  | if (wc.slid == 0 && sqp->ibqp.qp_type == IB_QPT_GSI) | 
|  | wc.slid = be16_to_cpu(IB_LID_PERMISSIVE); | 
|  | wc.sl = rdma_ah_get_sl(ah_attr); | 
|  | wc.dlid_path_bits = rdma_ah_get_dlid(ah_attr) & ((1 << ppd->lmc) - 1); | 
|  | wc.port_num = qp->port_num; | 
|  | /* Signal completion event if the solicited bit is set. */ | 
|  | rvt_recv_cq(qp, &wc, swqe->wr.send_flags & IB_SEND_SOLICITED); | 
|  | ibp->rvp.n_loop_pkts++; | 
|  | bail_unlock: | 
|  | spin_unlock_irqrestore(&qp->r_lock, flags); | 
|  | drop: | 
|  | rcu_read_unlock(); | 
|  | } | 
|  |  | 
|  | static void hfi1_make_bth_deth(struct rvt_qp *qp, struct rvt_swqe *wqe, | 
|  | struct ib_other_headers *ohdr, | 
|  | u16 *pkey, u32 extra_bytes, bool bypass) | 
|  | { | 
|  | u32 bth0; | 
|  | struct hfi1_ibport *ibp; | 
|  |  | 
|  | ibp = to_iport(qp->ibqp.device, qp->port_num); | 
|  | if (wqe->wr.opcode == IB_WR_SEND_WITH_IMM) { | 
|  | ohdr->u.ud.imm_data = wqe->wr.ex.imm_data; | 
|  | bth0 = IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE << 24; | 
|  | } else { | 
|  | bth0 = IB_OPCODE_UD_SEND_ONLY << 24; | 
|  | } | 
|  |  | 
|  | if (wqe->wr.send_flags & IB_SEND_SOLICITED) | 
|  | bth0 |= IB_BTH_SOLICITED; | 
|  | bth0 |= extra_bytes << 20; | 
|  | if (qp->ibqp.qp_type == IB_QPT_GSI || qp->ibqp.qp_type == IB_QPT_SMI) | 
|  | *pkey = hfi1_get_pkey(ibp, rvt_get_swqe_pkey_index(wqe)); | 
|  | else | 
|  | *pkey = hfi1_get_pkey(ibp, qp->s_pkey_index); | 
|  | if (!bypass) | 
|  | bth0 |= *pkey; | 
|  | ohdr->bth[0] = cpu_to_be32(bth0); | 
|  | ohdr->bth[1] = cpu_to_be32(rvt_get_swqe_remote_qpn(wqe)); | 
|  | ohdr->bth[2] = cpu_to_be32(mask_psn(wqe->psn)); | 
|  | /* | 
|  | * Qkeys with the high order bit set mean use the | 
|  | * qkey from the QP context instead of the WR (see 10.2.5). | 
|  | */ | 
|  | ohdr->u.ud.deth[0] = | 
|  | cpu_to_be32((int)rvt_get_swqe_remote_qkey(wqe) < 0 ? qp->qkey : | 
|  | rvt_get_swqe_remote_qkey(wqe)); | 
|  | ohdr->u.ud.deth[1] = cpu_to_be32(qp->ibqp.qp_num); | 
|  | } | 
|  |  | 
|  | void hfi1_make_ud_req_9B(struct rvt_qp *qp, struct hfi1_pkt_state *ps, | 
|  | struct rvt_swqe *wqe) | 
|  | { | 
|  | u32 nwords, extra_bytes; | 
|  | u16 len, slid, dlid, pkey; | 
|  | u16 lrh0 = 0; | 
|  | u8 sc5; | 
|  | struct hfi1_qp_priv *priv = qp->priv; | 
|  | struct ib_other_headers *ohdr; | 
|  | struct rdma_ah_attr *ah_attr; | 
|  | struct hfi1_pportdata *ppd; | 
|  | struct hfi1_ibport *ibp; | 
|  | struct ib_grh *grh; | 
|  |  | 
|  | ibp = to_iport(qp->ibqp.device, qp->port_num); | 
|  | ppd = ppd_from_ibp(ibp); | 
|  | ah_attr = rvt_get_swqe_ah_attr(wqe); | 
|  |  | 
|  | extra_bytes = -wqe->length & 3; | 
|  | nwords = ((wqe->length + extra_bytes) >> 2) + SIZE_OF_CRC; | 
|  | /* header size in dwords LRH+BTH+DETH = (8+12+8)/4. */ | 
|  | ps->s_txreq->hdr_dwords = 7; | 
|  | if (wqe->wr.opcode == IB_WR_SEND_WITH_IMM) | 
|  | ps->s_txreq->hdr_dwords++; | 
|  |  | 
|  | if (rdma_ah_get_ah_flags(ah_attr) & IB_AH_GRH) { | 
|  | grh = &ps->s_txreq->phdr.hdr.ibh.u.l.grh; | 
|  | ps->s_txreq->hdr_dwords += | 
|  | hfi1_make_grh(ibp, grh, rdma_ah_read_grh(ah_attr), | 
|  | ps->s_txreq->hdr_dwords - LRH_9B_DWORDS, | 
|  | nwords); | 
|  | lrh0 = HFI1_LRH_GRH; | 
|  | ohdr = &ps->s_txreq->phdr.hdr.ibh.u.l.oth; | 
|  | } else { | 
|  | lrh0 = HFI1_LRH_BTH; | 
|  | ohdr = &ps->s_txreq->phdr.hdr.ibh.u.oth; | 
|  | } | 
|  |  | 
|  | sc5 = ibp->sl_to_sc[rdma_ah_get_sl(ah_attr)]; | 
|  | lrh0 |= (rdma_ah_get_sl(ah_attr) & 0xf) << 4; | 
|  | if (qp->ibqp.qp_type == IB_QPT_SMI) { | 
|  | lrh0 |= 0xF000; /* Set VL (see ch. 13.5.3.1) */ | 
|  | priv->s_sc = 0xf; | 
|  | } else { | 
|  | lrh0 |= (sc5 & 0xf) << 12; | 
|  | priv->s_sc = sc5; | 
|  | } | 
|  |  | 
|  | dlid = opa_get_lid(rdma_ah_get_dlid(ah_attr), 9B); | 
|  | if (dlid == be16_to_cpu(IB_LID_PERMISSIVE)) { | 
|  | slid = be16_to_cpu(IB_LID_PERMISSIVE); | 
|  | } else { | 
|  | u16 lid = (u16)ppd->lid; | 
|  |  | 
|  | if (lid) { | 
|  | lid |= rdma_ah_get_path_bits(ah_attr) & | 
|  | ((1 << ppd->lmc) - 1); | 
|  | slid = lid; | 
|  | } else { | 
|  | slid = be16_to_cpu(IB_LID_PERMISSIVE); | 
|  | } | 
|  | } | 
|  | hfi1_make_bth_deth(qp, wqe, ohdr, &pkey, extra_bytes, false); | 
|  | len = ps->s_txreq->hdr_dwords + nwords; | 
|  |  | 
|  | /* Setup the packet */ | 
|  | ps->s_txreq->phdr.hdr.hdr_type = HFI1_PKT_TYPE_9B; | 
|  | hfi1_make_ib_hdr(&ps->s_txreq->phdr.hdr.ibh, | 
|  | lrh0, len, dlid, slid); | 
|  | } | 
|  |  | 
|  | void hfi1_make_ud_req_16B(struct rvt_qp *qp, struct hfi1_pkt_state *ps, | 
|  | struct rvt_swqe *wqe) | 
|  | { | 
|  | struct hfi1_qp_priv *priv = qp->priv; | 
|  | struct ib_other_headers *ohdr; | 
|  | struct rdma_ah_attr *ah_attr; | 
|  | struct hfi1_pportdata *ppd; | 
|  | struct hfi1_ibport *ibp; | 
|  | u32 dlid, slid, nwords, extra_bytes; | 
|  | u32 dest_qp = rvt_get_swqe_remote_qpn(wqe); | 
|  | u32 src_qp = qp->ibqp.qp_num; | 
|  | u16 len, pkey; | 
|  | u8 l4, sc5; | 
|  | bool is_mgmt = false; | 
|  |  | 
|  | ibp = to_iport(qp->ibqp.device, qp->port_num); | 
|  | ppd = ppd_from_ibp(ibp); | 
|  | ah_attr = rvt_get_swqe_ah_attr(wqe); | 
|  |  | 
|  | /* | 
|  | * Build 16B Management Packet if either the destination | 
|  | * or source queue pair number is 0 or 1. | 
|  | */ | 
|  | if (dest_qp == 0 || src_qp == 0 || dest_qp == 1 || src_qp == 1) { | 
|  | /* header size in dwords 16B LRH+L4_FM = (16+8)/4. */ | 
|  | ps->s_txreq->hdr_dwords = 6; | 
|  | is_mgmt = true; | 
|  | } else { | 
|  | /* header size in dwords 16B LRH+BTH+DETH = (16+12+8)/4. */ | 
|  | ps->s_txreq->hdr_dwords = 9; | 
|  | if (wqe->wr.opcode == IB_WR_SEND_WITH_IMM) | 
|  | ps->s_txreq->hdr_dwords++; | 
|  | } | 
|  |  | 
|  | /* SW provides space for CRC and LT for bypass packets. */ | 
|  | extra_bytes = hfi1_get_16b_padding((ps->s_txreq->hdr_dwords << 2), | 
|  | wqe->length); | 
|  | nwords = ((wqe->length + extra_bytes + SIZE_OF_LT) >> 2) + SIZE_OF_CRC; | 
|  |  | 
|  | if ((rdma_ah_get_ah_flags(ah_attr) & IB_AH_GRH) && | 
|  | hfi1_check_mcast(rdma_ah_get_dlid(ah_attr))) { | 
|  | struct ib_grh *grh; | 
|  | struct ib_global_route *grd = rdma_ah_retrieve_grh(ah_attr); | 
|  | /* | 
|  | * Ensure OPA GIDs are transformed to IB gids | 
|  | * before creating the GRH. | 
|  | */ | 
|  | if (grd->sgid_index == OPA_GID_INDEX) { | 
|  | dd_dev_warn(ppd->dd, "Bad sgid_index. sgid_index: %d\n", | 
|  | grd->sgid_index); | 
|  | grd->sgid_index = 0; | 
|  | } | 
|  | grh = &ps->s_txreq->phdr.hdr.opah.u.l.grh; | 
|  | ps->s_txreq->hdr_dwords += hfi1_make_grh( | 
|  | ibp, grh, grd, | 
|  | ps->s_txreq->hdr_dwords - LRH_16B_DWORDS, | 
|  | nwords); | 
|  | ohdr = &ps->s_txreq->phdr.hdr.opah.u.l.oth; | 
|  | l4 = OPA_16B_L4_IB_GLOBAL; | 
|  | } else { | 
|  | ohdr = &ps->s_txreq->phdr.hdr.opah.u.oth; | 
|  | l4 = OPA_16B_L4_IB_LOCAL; | 
|  | } | 
|  |  | 
|  | sc5 = ibp->sl_to_sc[rdma_ah_get_sl(ah_attr)]; | 
|  | if (qp->ibqp.qp_type == IB_QPT_SMI) | 
|  | priv->s_sc = 0xf; | 
|  | else | 
|  | priv->s_sc = sc5; | 
|  |  | 
|  | dlid = opa_get_lid(rdma_ah_get_dlid(ah_attr), 16B); | 
|  | if (!ppd->lid) | 
|  | slid = be32_to_cpu(OPA_LID_PERMISSIVE); | 
|  | else | 
|  | slid = ppd->lid | (rdma_ah_get_path_bits(ah_attr) & | 
|  | ((1 << ppd->lmc) - 1)); | 
|  |  | 
|  | if (is_mgmt) { | 
|  | l4 = OPA_16B_L4_FM; | 
|  | pkey = hfi1_get_pkey(ibp, rvt_get_swqe_pkey_index(wqe)); | 
|  | hfi1_16B_set_qpn(&ps->s_txreq->phdr.hdr.opah.u.mgmt, | 
|  | dest_qp, src_qp); | 
|  | } else { | 
|  | hfi1_make_bth_deth(qp, wqe, ohdr, &pkey, extra_bytes, true); | 
|  | } | 
|  | /* Convert dwords to flits */ | 
|  | len = (ps->s_txreq->hdr_dwords + nwords) >> 1; | 
|  |  | 
|  | /* Setup the packet */ | 
|  | ps->s_txreq->phdr.hdr.hdr_type = HFI1_PKT_TYPE_16B; | 
|  | hfi1_make_16b_hdr(&ps->s_txreq->phdr.hdr.opah, | 
|  | slid, dlid, len, pkey, 0, 0, l4, priv->s_sc); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hfi1_make_ud_req - construct a UD request packet | 
|  | * @qp: the QP | 
|  | * @ps: the current packet state | 
|  | * | 
|  | * Assume s_lock is held. | 
|  | * | 
|  | * Return 1 if constructed; otherwise, return 0. | 
|  | */ | 
|  | int hfi1_make_ud_req(struct rvt_qp *qp, struct hfi1_pkt_state *ps) | 
|  | { | 
|  | struct hfi1_qp_priv *priv = qp->priv; | 
|  | struct rdma_ah_attr *ah_attr; | 
|  | struct hfi1_pportdata *ppd; | 
|  | struct hfi1_ibport *ibp; | 
|  | struct rvt_swqe *wqe; | 
|  | int next_cur; | 
|  | u32 lid; | 
|  |  | 
|  | ps->s_txreq = get_txreq(ps->dev, qp); | 
|  | if (!ps->s_txreq) | 
|  | goto bail_no_tx; | 
|  |  | 
|  | if (!(ib_rvt_state_ops[qp->state] & RVT_PROCESS_NEXT_SEND_OK)) { | 
|  | if (!(ib_rvt_state_ops[qp->state] & RVT_FLUSH_SEND)) | 
|  | goto bail; | 
|  | /* We are in the error state, flush the work request. */ | 
|  | if (qp->s_last == READ_ONCE(qp->s_head)) | 
|  | goto bail; | 
|  | /* If DMAs are in progress, we can't flush immediately. */ | 
|  | if (iowait_sdma_pending(&priv->s_iowait)) { | 
|  | qp->s_flags |= RVT_S_WAIT_DMA; | 
|  | goto bail; | 
|  | } | 
|  | wqe = rvt_get_swqe_ptr(qp, qp->s_last); | 
|  | rvt_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR); | 
|  | goto done_free_tx; | 
|  | } | 
|  |  | 
|  | /* see post_one_send() */ | 
|  | if (qp->s_cur == READ_ONCE(qp->s_head)) | 
|  | goto bail; | 
|  |  | 
|  | wqe = rvt_get_swqe_ptr(qp, qp->s_cur); | 
|  | next_cur = qp->s_cur + 1; | 
|  | if (next_cur >= qp->s_size) | 
|  | next_cur = 0; | 
|  |  | 
|  | /* Construct the header. */ | 
|  | ibp = to_iport(qp->ibqp.device, qp->port_num); | 
|  | ppd = ppd_from_ibp(ibp); | 
|  | ah_attr = rvt_get_swqe_ah_attr(wqe); | 
|  | priv->hdr_type = hfi1_get_hdr_type(ppd->lid, ah_attr); | 
|  | if ((!hfi1_check_mcast(rdma_ah_get_dlid(ah_attr))) || | 
|  | (rdma_ah_get_dlid(ah_attr) == be32_to_cpu(OPA_LID_PERMISSIVE))) { | 
|  | lid = rdma_ah_get_dlid(ah_attr) & ~((1 << ppd->lmc) - 1); | 
|  | if (unlikely(!loopback && | 
|  | ((lid == ppd->lid) || | 
|  | ((lid == be32_to_cpu(OPA_LID_PERMISSIVE)) && | 
|  | (qp->ibqp.qp_type == IB_QPT_GSI))))) { | 
|  | unsigned long tflags = ps->flags; | 
|  | /* | 
|  | * If DMAs are in progress, we can't generate | 
|  | * a completion for the loopback packet since | 
|  | * it would be out of order. | 
|  | * Instead of waiting, we could queue a | 
|  | * zero length descriptor so we get a callback. | 
|  | */ | 
|  | if (iowait_sdma_pending(&priv->s_iowait)) { | 
|  | qp->s_flags |= RVT_S_WAIT_DMA; | 
|  | goto bail; | 
|  | } | 
|  | qp->s_cur = next_cur; | 
|  | spin_unlock_irqrestore(&qp->s_lock, tflags); | 
|  | ud_loopback(qp, wqe); | 
|  | spin_lock_irqsave(&qp->s_lock, tflags); | 
|  | ps->flags = tflags; | 
|  | rvt_send_complete(qp, wqe, IB_WC_SUCCESS); | 
|  | goto done_free_tx; | 
|  | } | 
|  | } | 
|  |  | 
|  | qp->s_cur = next_cur; | 
|  | ps->s_txreq->s_cur_size = wqe->length; | 
|  | ps->s_txreq->ss = &qp->s_sge; | 
|  | qp->s_srate = rdma_ah_get_static_rate(ah_attr); | 
|  | qp->srate_mbps = ib_rate_to_mbps(qp->s_srate); | 
|  | qp->s_wqe = wqe; | 
|  | qp->s_sge.sge = wqe->sg_list[0]; | 
|  | qp->s_sge.sg_list = wqe->sg_list + 1; | 
|  | qp->s_sge.num_sge = wqe->wr.num_sge; | 
|  | qp->s_sge.total_len = wqe->length; | 
|  |  | 
|  | /* Make the appropriate header */ | 
|  | hfi1_make_ud_req_tbl[priv->hdr_type](qp, ps, qp->s_wqe); | 
|  | priv->s_sde = qp_to_sdma_engine(qp, priv->s_sc); | 
|  | ps->s_txreq->sde = priv->s_sde; | 
|  | priv->s_sendcontext = qp_to_send_context(qp, priv->s_sc); | 
|  | ps->s_txreq->psc = priv->s_sendcontext; | 
|  | /* disarm any ahg */ | 
|  | priv->s_ahg->ahgcount = 0; | 
|  | priv->s_ahg->ahgidx = 0; | 
|  | priv->s_ahg->tx_flags = 0; | 
|  |  | 
|  | return 1; | 
|  |  | 
|  | done_free_tx: | 
|  | hfi1_put_txreq(ps->s_txreq); | 
|  | ps->s_txreq = NULL; | 
|  | return 1; | 
|  |  | 
|  | bail: | 
|  | hfi1_put_txreq(ps->s_txreq); | 
|  |  | 
|  | bail_no_tx: | 
|  | ps->s_txreq = NULL; | 
|  | qp->s_flags &= ~RVT_S_BUSY; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Hardware can't check this so we do it here. | 
|  | * | 
|  | * This is a slightly different algorithm than the standard pkey check.  It | 
|  | * special cases the management keys and allows for 0x7fff and 0xffff to be in | 
|  | * the table at the same time. | 
|  | * | 
|  | * @returns the index found or -1 if not found | 
|  | */ | 
|  | int hfi1_lookup_pkey_idx(struct hfi1_ibport *ibp, u16 pkey) | 
|  | { | 
|  | struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); | 
|  | unsigned i; | 
|  |  | 
|  | if (pkey == FULL_MGMT_P_KEY || pkey == LIM_MGMT_P_KEY) { | 
|  | unsigned lim_idx = -1; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(ppd->pkeys); ++i) { | 
|  | /* here we look for an exact match */ | 
|  | if (ppd->pkeys[i] == pkey) | 
|  | return i; | 
|  | if (ppd->pkeys[i] == LIM_MGMT_P_KEY) | 
|  | lim_idx = i; | 
|  | } | 
|  |  | 
|  | /* did not find 0xffff return 0x7fff idx if found */ | 
|  | if (pkey == FULL_MGMT_P_KEY) | 
|  | return lim_idx; | 
|  |  | 
|  | /* no match...  */ | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | pkey &= 0x7fff; /* remove limited/full membership bit */ | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(ppd->pkeys); ++i) | 
|  | if ((ppd->pkeys[i] & 0x7fff) == pkey) | 
|  | return i; | 
|  |  | 
|  | /* | 
|  | * Should not get here, this means hardware failed to validate pkeys. | 
|  | */ | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | void return_cnp_16B(struct hfi1_ibport *ibp, struct rvt_qp *qp, | 
|  | u32 remote_qpn, u16 pkey, u32 slid, u32 dlid, | 
|  | u8 sc5, const struct ib_grh *old_grh) | 
|  | { | 
|  | u64 pbc, pbc_flags = 0; | 
|  | u32 bth0, plen, vl, hwords = 7; | 
|  | u16 len; | 
|  | u8 l4; | 
|  | struct hfi1_opa_header hdr; | 
|  | struct ib_other_headers *ohdr; | 
|  | struct pio_buf *pbuf; | 
|  | struct send_context *ctxt = qp_to_send_context(qp, sc5); | 
|  | struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); | 
|  | u32 nwords; | 
|  |  | 
|  | hdr.hdr_type = HFI1_PKT_TYPE_16B; | 
|  | /* Populate length */ | 
|  | nwords = ((hfi1_get_16b_padding(hwords << 2, 0) + | 
|  | SIZE_OF_LT) >> 2) + SIZE_OF_CRC; | 
|  | if (old_grh) { | 
|  | struct ib_grh *grh = &hdr.opah.u.l.grh; | 
|  |  | 
|  | grh->version_tclass_flow = old_grh->version_tclass_flow; | 
|  | grh->paylen = cpu_to_be16( | 
|  | (hwords - LRH_16B_DWORDS + nwords) << 2); | 
|  | grh->hop_limit = 0xff; | 
|  | grh->sgid = old_grh->dgid; | 
|  | grh->dgid = old_grh->sgid; | 
|  | ohdr = &hdr.opah.u.l.oth; | 
|  | l4 = OPA_16B_L4_IB_GLOBAL; | 
|  | hwords += sizeof(struct ib_grh) / sizeof(u32); | 
|  | } else { | 
|  | ohdr = &hdr.opah.u.oth; | 
|  | l4 = OPA_16B_L4_IB_LOCAL; | 
|  | } | 
|  |  | 
|  | /* BIT 16 to 19 is TVER. Bit 20 to 22 is pad cnt */ | 
|  | bth0 = (IB_OPCODE_CNP << 24) | (1 << 16) | | 
|  | (hfi1_get_16b_padding(hwords << 2, 0) << 20); | 
|  | ohdr->bth[0] = cpu_to_be32(bth0); | 
|  |  | 
|  | ohdr->bth[1] = cpu_to_be32(remote_qpn); | 
|  | ohdr->bth[2] = 0; /* PSN 0 */ | 
|  |  | 
|  | /* Convert dwords to flits */ | 
|  | len = (hwords + nwords) >> 1; | 
|  | hfi1_make_16b_hdr(&hdr.opah, slid, dlid, len, pkey, 1, 0, l4, sc5); | 
|  |  | 
|  | plen = 2 /* PBC */ + hwords + nwords; | 
|  | pbc_flags |= PBC_PACKET_BYPASS | PBC_INSERT_BYPASS_ICRC; | 
|  | vl = sc_to_vlt(ppd->dd, sc5); | 
|  | pbc = create_pbc(ppd, pbc_flags, qp->srate_mbps, vl, plen); | 
|  | if (ctxt) { | 
|  | pbuf = sc_buffer_alloc(ctxt, plen, NULL, NULL); | 
|  | if (!IS_ERR_OR_NULL(pbuf)) { | 
|  | trace_pio_output_ibhdr(ppd->dd, &hdr, sc5); | 
|  | ppd->dd->pio_inline_send(ppd->dd, pbuf, pbc, | 
|  | &hdr, hwords); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | void return_cnp(struct hfi1_ibport *ibp, struct rvt_qp *qp, u32 remote_qpn, | 
|  | u16 pkey, u32 slid, u32 dlid, u8 sc5, | 
|  | const struct ib_grh *old_grh) | 
|  | { | 
|  | u64 pbc, pbc_flags = 0; | 
|  | u32 bth0, plen, vl, hwords = 5; | 
|  | u16 lrh0; | 
|  | u8 sl = ibp->sc_to_sl[sc5]; | 
|  | struct hfi1_opa_header hdr; | 
|  | struct ib_other_headers *ohdr; | 
|  | struct pio_buf *pbuf; | 
|  | struct send_context *ctxt = qp_to_send_context(qp, sc5); | 
|  | struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); | 
|  |  | 
|  | hdr.hdr_type = HFI1_PKT_TYPE_9B; | 
|  | if (old_grh) { | 
|  | struct ib_grh *grh = &hdr.ibh.u.l.grh; | 
|  |  | 
|  | grh->version_tclass_flow = old_grh->version_tclass_flow; | 
|  | grh->paylen = cpu_to_be16( | 
|  | (hwords - LRH_9B_DWORDS + SIZE_OF_CRC) << 2); | 
|  | grh->hop_limit = 0xff; | 
|  | grh->sgid = old_grh->dgid; | 
|  | grh->dgid = old_grh->sgid; | 
|  | ohdr = &hdr.ibh.u.l.oth; | 
|  | lrh0 = HFI1_LRH_GRH; | 
|  | hwords += sizeof(struct ib_grh) / sizeof(u32); | 
|  | } else { | 
|  | ohdr = &hdr.ibh.u.oth; | 
|  | lrh0 = HFI1_LRH_BTH; | 
|  | } | 
|  |  | 
|  | lrh0 |= (sc5 & 0xf) << 12 | sl << 4; | 
|  |  | 
|  | bth0 = pkey | (IB_OPCODE_CNP << 24); | 
|  | ohdr->bth[0] = cpu_to_be32(bth0); | 
|  |  | 
|  | ohdr->bth[1] = cpu_to_be32(remote_qpn | (1 << IB_BECN_SHIFT)); | 
|  | ohdr->bth[2] = 0; /* PSN 0 */ | 
|  |  | 
|  | hfi1_make_ib_hdr(&hdr.ibh, lrh0, hwords + SIZE_OF_CRC, dlid, slid); | 
|  | plen = 2 /* PBC */ + hwords; | 
|  | pbc_flags |= (ib_is_sc5(sc5) << PBC_DC_INFO_SHIFT); | 
|  | vl = sc_to_vlt(ppd->dd, sc5); | 
|  | pbc = create_pbc(ppd, pbc_flags, qp->srate_mbps, vl, plen); | 
|  | if (ctxt) { | 
|  | pbuf = sc_buffer_alloc(ctxt, plen, NULL, NULL); | 
|  | if (!IS_ERR_OR_NULL(pbuf)) { | 
|  | trace_pio_output_ibhdr(ppd->dd, &hdr, sc5); | 
|  | ppd->dd->pio_inline_send(ppd->dd, pbuf, pbc, | 
|  | &hdr, hwords); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * opa_smp_check() - Do the regular pkey checking, and the additional | 
|  | * checks for SMPs specified in OPAv1 rev 1.0, 9/19/2016 update, section | 
|  | * 9.10.25 ("SMA Packet Checks"). | 
|  | * | 
|  | * Note that: | 
|  | *   - Checks are done using the pkey directly from the packet's BTH, | 
|  | *     and specifically _not_ the pkey that we attach to the completion, | 
|  | *     which may be different. | 
|  | *   - These checks are specifically for "non-local" SMPs (i.e., SMPs | 
|  | *     which originated on another node). SMPs which are sent from, and | 
|  | *     destined to this node are checked in opa_local_smp_check(). | 
|  | * | 
|  | * At the point where opa_smp_check() is called, we know: | 
|  | *   - destination QP is QP0 | 
|  | * | 
|  | * opa_smp_check() returns 0 if all checks succeed, 1 otherwise. | 
|  | */ | 
|  | static int opa_smp_check(struct hfi1_ibport *ibp, u16 pkey, u8 sc5, | 
|  | struct rvt_qp *qp, u16 slid, struct opa_smp *smp) | 
|  | { | 
|  | struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); | 
|  |  | 
|  | /* | 
|  | * I don't think it's possible for us to get here with sc != 0xf, | 
|  | * but check it to be certain. | 
|  | */ | 
|  | if (sc5 != 0xf) | 
|  | return 1; | 
|  |  | 
|  | if (rcv_pkey_check(ppd, pkey, sc5, slid)) | 
|  | return 1; | 
|  |  | 
|  | /* | 
|  | * At this point we know (and so don't need to check again) that | 
|  | * the pkey is either LIM_MGMT_P_KEY, or FULL_MGMT_P_KEY | 
|  | * (see ingress_pkey_check). | 
|  | */ | 
|  | if (smp->mgmt_class != IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE && | 
|  | smp->mgmt_class != IB_MGMT_CLASS_SUBN_LID_ROUTED) { | 
|  | ingress_pkey_table_fail(ppd, pkey, slid); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * SMPs fall into one of four (disjoint) categories: | 
|  | * SMA request, SMA response, SMA trap, or SMA trap repress. | 
|  | * Our response depends, in part, on which type of SMP we're | 
|  | * processing. | 
|  | * | 
|  | * If this is an SMA response, skip the check here. | 
|  | * | 
|  | * If this is an SMA request or SMA trap repress: | 
|  | *   - pkey != FULL_MGMT_P_KEY => | 
|  | *       increment port recv constraint errors, drop MAD | 
|  | * | 
|  | * Otherwise: | 
|  | *    - accept if the port is running an SM | 
|  | *    - drop MAD if it's an SMA trap | 
|  | *    - pkey == FULL_MGMT_P_KEY => | 
|  | *        reply with unsupported method | 
|  | *    - pkey != FULL_MGMT_P_KEY => | 
|  | *	  increment port recv constraint errors, drop MAD | 
|  | */ | 
|  | switch (smp->method) { | 
|  | case IB_MGMT_METHOD_GET_RESP: | 
|  | case IB_MGMT_METHOD_REPORT_RESP: | 
|  | break; | 
|  | case IB_MGMT_METHOD_GET: | 
|  | case IB_MGMT_METHOD_SET: | 
|  | case IB_MGMT_METHOD_REPORT: | 
|  | case IB_MGMT_METHOD_TRAP_REPRESS: | 
|  | if (pkey != FULL_MGMT_P_KEY) { | 
|  | ingress_pkey_table_fail(ppd, pkey, slid); | 
|  | return 1; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | if (ibp->rvp.port_cap_flags & IB_PORT_SM) | 
|  | return 0; | 
|  | if (smp->method == IB_MGMT_METHOD_TRAP) | 
|  | return 1; | 
|  | if (pkey == FULL_MGMT_P_KEY) { | 
|  | smp->status |= IB_SMP_UNSUP_METHOD; | 
|  | return 0; | 
|  | } | 
|  | ingress_pkey_table_fail(ppd, pkey, slid); | 
|  | return 1; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * hfi1_ud_rcv - receive an incoming UD packet | 
|  | * @packet: the packet structure | 
|  | * | 
|  | * This is called from qp_rcv() to process an incoming UD packet | 
|  | * for the given QP. | 
|  | * Called at interrupt level. | 
|  | */ | 
|  | void hfi1_ud_rcv(struct hfi1_packet *packet) | 
|  | { | 
|  | u32 hdrsize = packet->hlen; | 
|  | struct ib_wc wc; | 
|  | u32 src_qp; | 
|  | u16 pkey; | 
|  | int mgmt_pkey_idx = -1; | 
|  | struct hfi1_ibport *ibp = rcd_to_iport(packet->rcd); | 
|  | struct hfi1_pportdata *ppd = ppd_from_ibp(ibp); | 
|  | void *data = packet->payload; | 
|  | u32 tlen = packet->tlen; | 
|  | struct rvt_qp *qp = packet->qp; | 
|  | u8 sc5 = packet->sc; | 
|  | u8 sl_from_sc; | 
|  | u8 opcode = packet->opcode; | 
|  | u8 sl = packet->sl; | 
|  | u32 dlid = packet->dlid; | 
|  | u32 slid = packet->slid; | 
|  | u8 extra_bytes; | 
|  | u8 l4 = 0; | 
|  | bool dlid_is_permissive; | 
|  | bool slid_is_permissive; | 
|  | bool solicited = false; | 
|  |  | 
|  | extra_bytes = packet->pad + packet->extra_byte + (SIZE_OF_CRC << 2); | 
|  |  | 
|  | if (packet->etype == RHF_RCV_TYPE_BYPASS) { | 
|  | u32 permissive_lid = | 
|  | opa_get_lid(be32_to_cpu(OPA_LID_PERMISSIVE), 16B); | 
|  |  | 
|  | l4 = hfi1_16B_get_l4(packet->hdr); | 
|  | pkey = hfi1_16B_get_pkey(packet->hdr); | 
|  | dlid_is_permissive = (dlid == permissive_lid); | 
|  | slid_is_permissive = (slid == permissive_lid); | 
|  | } else { | 
|  | pkey = ib_bth_get_pkey(packet->ohdr); | 
|  | dlid_is_permissive = (dlid == be16_to_cpu(IB_LID_PERMISSIVE)); | 
|  | slid_is_permissive = (slid == be16_to_cpu(IB_LID_PERMISSIVE)); | 
|  | } | 
|  | sl_from_sc = ibp->sc_to_sl[sc5]; | 
|  |  | 
|  | if (likely(l4 != OPA_16B_L4_FM)) { | 
|  | src_qp = ib_get_sqpn(packet->ohdr); | 
|  | solicited = ib_bth_is_solicited(packet->ohdr); | 
|  | } else { | 
|  | src_qp = hfi1_16B_get_src_qpn(packet->mgmt); | 
|  | } | 
|  |  | 
|  | process_ecn(qp, packet); | 
|  | /* | 
|  | * Get the number of bytes the message was padded by | 
|  | * and drop incomplete packets. | 
|  | */ | 
|  | if (unlikely(tlen < (hdrsize + extra_bytes))) | 
|  | goto drop; | 
|  |  | 
|  | tlen -= hdrsize + extra_bytes; | 
|  |  | 
|  | /* | 
|  | * Check that the permissive LID is only used on QP0 | 
|  | * and the QKEY matches (see 9.6.1.4.1 and 9.6.1.5.1). | 
|  | */ | 
|  | if (qp->ibqp.qp_num) { | 
|  | if (unlikely(dlid_is_permissive || slid_is_permissive)) | 
|  | goto drop; | 
|  | if (qp->ibqp.qp_num > 1) { | 
|  | if (unlikely(rcv_pkey_check(ppd, pkey, sc5, slid))) { | 
|  | /* | 
|  | * Traps will not be sent for packets dropped | 
|  | * by the HW. This is fine, as sending trap | 
|  | * for invalid pkeys is optional according to | 
|  | * IB spec (release 1.3, section 10.9.4) | 
|  | */ | 
|  | hfi1_bad_pkey(ibp, | 
|  | pkey, sl, | 
|  | src_qp, qp->ibqp.qp_num, | 
|  | slid, dlid); | 
|  | return; | 
|  | } | 
|  | } else { | 
|  | /* GSI packet */ | 
|  | mgmt_pkey_idx = hfi1_lookup_pkey_idx(ibp, pkey); | 
|  | if (mgmt_pkey_idx < 0) | 
|  | goto drop; | 
|  | } | 
|  | if (unlikely(l4 != OPA_16B_L4_FM && | 
|  | ib_get_qkey(packet->ohdr) != qp->qkey)) | 
|  | return; /* Silent drop */ | 
|  |  | 
|  | /* Drop invalid MAD packets (see 13.5.3.1). */ | 
|  | if (unlikely(qp->ibqp.qp_num == 1 && | 
|  | (tlen > 2048 || (sc5 == 0xF)))) | 
|  | goto drop; | 
|  | } else { | 
|  | /* Received on QP0, and so by definition, this is an SMP */ | 
|  | struct opa_smp *smp = (struct opa_smp *)data; | 
|  |  | 
|  | if (opa_smp_check(ibp, pkey, sc5, qp, slid, smp)) | 
|  | goto drop; | 
|  |  | 
|  | if (tlen > 2048) | 
|  | goto drop; | 
|  | if ((dlid_is_permissive || slid_is_permissive) && | 
|  | smp->mgmt_class != IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) | 
|  | goto drop; | 
|  |  | 
|  | /* look up SMI pkey */ | 
|  | mgmt_pkey_idx = hfi1_lookup_pkey_idx(ibp, pkey); | 
|  | if (mgmt_pkey_idx < 0) | 
|  | goto drop; | 
|  | } | 
|  |  | 
|  | if (qp->ibqp.qp_num > 1 && | 
|  | opcode == IB_OPCODE_UD_SEND_ONLY_WITH_IMMEDIATE) { | 
|  | wc.ex.imm_data = packet->ohdr->u.ud.imm_data; | 
|  | wc.wc_flags = IB_WC_WITH_IMM; | 
|  | } else if (opcode == IB_OPCODE_UD_SEND_ONLY) { | 
|  | wc.ex.imm_data = 0; | 
|  | wc.wc_flags = 0; | 
|  | } else { | 
|  | goto drop; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * A GRH is expected to precede the data even if not | 
|  | * present on the wire. | 
|  | */ | 
|  | wc.byte_len = tlen + sizeof(struct ib_grh); | 
|  |  | 
|  | /* | 
|  | * Get the next work request entry to find where to put the data. | 
|  | */ | 
|  | if (qp->r_flags & RVT_R_REUSE_SGE) { | 
|  | qp->r_flags &= ~RVT_R_REUSE_SGE; | 
|  | } else { | 
|  | int ret; | 
|  |  | 
|  | ret = rvt_get_rwqe(qp, false); | 
|  | if (ret < 0) { | 
|  | rvt_rc_error(qp, IB_WC_LOC_QP_OP_ERR); | 
|  | return; | 
|  | } | 
|  | if (!ret) { | 
|  | if (qp->ibqp.qp_num == 0) | 
|  | ibp->rvp.n_vl15_dropped++; | 
|  | return; | 
|  | } | 
|  | } | 
|  | /* Silently drop packets which are too big. */ | 
|  | if (unlikely(wc.byte_len > qp->r_len)) { | 
|  | qp->r_flags |= RVT_R_REUSE_SGE; | 
|  | goto drop; | 
|  | } | 
|  | if (packet->grh) { | 
|  | rvt_copy_sge(qp, &qp->r_sge, packet->grh, | 
|  | sizeof(struct ib_grh), true, false); | 
|  | wc.wc_flags |= IB_WC_GRH; | 
|  | } else if (packet->etype == RHF_RCV_TYPE_BYPASS) { | 
|  | struct ib_grh grh; | 
|  | /* | 
|  | * Assuming we only created 16B on the send side | 
|  | * if we want to use large LIDs, since GRH was stripped | 
|  | * out when creating 16B, add back the GRH here. | 
|  | */ | 
|  | hfi1_make_ext_grh(packet, &grh, slid, dlid); | 
|  | rvt_copy_sge(qp, &qp->r_sge, &grh, | 
|  | sizeof(struct ib_grh), true, false); | 
|  | wc.wc_flags |= IB_WC_GRH; | 
|  | } else { | 
|  | rvt_skip_sge(&qp->r_sge, sizeof(struct ib_grh), true); | 
|  | } | 
|  | rvt_copy_sge(qp, &qp->r_sge, data, wc.byte_len - sizeof(struct ib_grh), | 
|  | true, false); | 
|  | rvt_put_ss(&qp->r_sge); | 
|  | if (!test_and_clear_bit(RVT_R_WRID_VALID, &qp->r_aflags)) | 
|  | return; | 
|  | wc.wr_id = qp->r_wr_id; | 
|  | wc.status = IB_WC_SUCCESS; | 
|  | wc.opcode = IB_WC_RECV; | 
|  | wc.vendor_err = 0; | 
|  | wc.qp = &qp->ibqp; | 
|  | wc.src_qp = src_qp; | 
|  |  | 
|  | if (qp->ibqp.qp_type == IB_QPT_GSI || | 
|  | qp->ibqp.qp_type == IB_QPT_SMI) { | 
|  | if (mgmt_pkey_idx < 0) { | 
|  | if (net_ratelimit()) { | 
|  | struct hfi1_devdata *dd = ppd->dd; | 
|  |  | 
|  | dd_dev_err(dd, "QP type %d mgmt_pkey_idx < 0 and packet not dropped???\n", | 
|  | qp->ibqp.qp_type); | 
|  | mgmt_pkey_idx = 0; | 
|  | } | 
|  | } | 
|  | wc.pkey_index = (unsigned)mgmt_pkey_idx; | 
|  | } else { | 
|  | wc.pkey_index = 0; | 
|  | } | 
|  | if (slid_is_permissive) | 
|  | slid = be32_to_cpu(OPA_LID_PERMISSIVE); | 
|  | wc.slid = slid & U16_MAX; | 
|  | wc.sl = sl_from_sc; | 
|  |  | 
|  | /* | 
|  | * Save the LMC lower bits if the destination LID is a unicast LID. | 
|  | */ | 
|  | wc.dlid_path_bits = hfi1_check_mcast(dlid) ? 0 : | 
|  | dlid & ((1 << ppd_from_ibp(ibp)->lmc) - 1); | 
|  | wc.port_num = qp->port_num; | 
|  | /* Signal completion event if the solicited bit is set. */ | 
|  | rvt_recv_cq(qp, &wc, solicited); | 
|  | return; | 
|  |  | 
|  | drop: | 
|  | ibp->rvp.n_pkt_drops++; | 
|  | } |