drivers/regulator/hi6421-regulator.c - kernel/common - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 //
 // Device driver for regulators in Hi6421 IC
 //
 // Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd.
 //              http://www.hisilicon.com
 // Copyright (c) <2013-2014> Linaro Ltd.
 //              https://www.linaro.org
 //
 // Author: Guodong Xu <[email protected]>

 #include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
 #include <linux/regmap.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/mfd/hi6421-pmic.h>

 /*
  * struct hi6421_regulator_pdata - Hi6421 regulator data of platform device
  * @lock: mutex to serialize regulator enable
  */
 struct hi6421_regulator_pdata {
 	struct mutex lock;
 };

 /*
  * struct hi6421_regulator_info - hi6421 regulator information
  * @desc: regulator description
  * @mode_mask: ECO mode bitmask of LDOs; for BUCKs, this masks sleep
  * @eco_microamp: eco mode load upper limit (in uA), valid for LDOs only
  */
 struct hi6421_regulator_info {
 	struct regulator_desc	desc;
 	u8		mode_mask;
 	u32		eco_microamp;
 };

 /* HI6421 regulators */
 enum hi6421_regulator_id {
 	HI6421_LDO0,
 	HI6421_LDO1,
 	HI6421_LDO2,
 	HI6421_LDO3,
 	HI6421_LDO4,
 	HI6421_LDO5,
 	HI6421_LDO6,
 	HI6421_LDO7,
 	HI6421_LDO8,
 	HI6421_LDO9,
 	HI6421_LDO10,
 	HI6421_LDO11,
 	HI6421_LDO12,
 	HI6421_LDO13,
 	HI6421_LDO14,
 	HI6421_LDO15,
 	HI6421_LDO16,
 	HI6421_LDO17,
 	HI6421_LDO18,
 	HI6421_LDO19,
 	HI6421_LDO20,
 	HI6421_LDOAUDIO,
 	HI6421_BUCK0,
 	HI6421_BUCK1,
 	HI6421_BUCK2,
 	HI6421_BUCK3,
 	HI6421_BUCK4,
 	HI6421_BUCK5,
 	HI6421_NUM_REGULATORS,
 };

 /* LDO 0, 4~7, 9~14, 16~20 have same voltage table. */
 static const unsigned int ldo_0_voltages[] = {
 	1500000, 1800000, 2400000, 2500000,
 	2600000, 2700000, 2850000, 3000000,
 };

 /* LDO 8, 15 have same voltage table. */
 static const unsigned int ldo_8_voltages[] = {
 	1500000, 1800000, 2400000, 2600000,
 	2700000, 2850000, 3000000, 3300000,
 };

 /* Ranges are sorted in ascending order. */
 static const struct linear_range ldo_audio_volt_range[] = {
 	REGULATOR_LINEAR_RANGE(2800000, 0, 3, 50000),
 	REGULATOR_LINEAR_RANGE(3000000, 4, 7, 100000),
 };

 static const unsigned int buck_3_voltages[] = {
 	 950000, 1050000, 1100000, 1117000,
 	1134000, 1150000, 1167000, 1200000,
 };

 static const unsigned int buck_4_voltages[] = {
 	1150000, 1200000, 1250000, 1350000,
 	1700000, 1800000, 1900000, 2000000,
 };

 static const unsigned int buck_5_voltages[] = {
 	1150000, 1200000, 1250000, 1350000,
 	1600000, 1700000, 1800000, 1900000,
 };

 static const struct regulator_ops hi6421_ldo_ops;
 static const struct regulator_ops hi6421_ldo_linear_ops;
 static const struct regulator_ops hi6421_ldo_linear_range_ops;
 static const struct regulator_ops hi6421_buck012_ops;
 static const struct regulator_ops hi6421_buck345_ops;

 #define HI6421_LDO_ENABLE_TIME (350)
 /*
  * _id - LDO id name string
  * _match - of match name string
  * v_table - voltage table
  * vreg - voltage select register
  * vmask - voltage select mask
  * ereg - enable register
  * emask - enable mask
  * odelay - off/on delay time in uS
  * ecomask - eco mode mask
  * ecoamp - eco mode load uppler limit in uA
  */
 #define HI6421_LDO(_id, _match, v_table, vreg, vmask, ereg, emask,	\
 		   odelay, ecomask, ecoamp)				\
 	[HI6421_##_id] = {						\
 		.desc = {						\
 			.name		= #_id,				\
 			.of_match        = #_match,			\
 			.regulators_node = "regulators",		\
 			.ops		= &hi6421_ldo_ops,		\
 			.type		= REGULATOR_VOLTAGE,		\
 			.id		= HI6421_##_id,			\
 			.owner		= THIS_MODULE,			\
 			.n_voltages	= ARRAY_SIZE(v_table),		\
 			.volt_table	= v_table,			\
 			.vsel_reg	= HI6421_REG_TO_BUS_ADDR(vreg),	\
 			.vsel_mask	= vmask,			\
 			.enable_reg	= HI6421_REG_TO_BUS_ADDR(ereg),	\
 			.enable_mask	= emask,			\
 			.enable_time	= HI6421_LDO_ENABLE_TIME,	\
 			.off_on_delay	= odelay,			\
 		},							\
 		.mode_mask		= ecomask,			\
 		.eco_microamp		= ecoamp,			\
 	}

 /* HI6421 LDO1~3 are linear voltage regulators at fixed uV_step
  *
  * _id - LDO id name string
  * _match - of match name string
  * _min_uV - minimum voltage supported in uV
  * n_volt - number of votages available
  * vstep - voltage increase in each linear step in uV
  * vreg - voltage select register
  * vmask - voltage select mask
  * ereg - enable register
  * emask - enable mask
  * odelay - off/on delay time in uS
  * ecomask - eco mode mask
  * ecoamp - eco mode load uppler limit in uA
  */
 #define HI6421_LDO_LINEAR(_id, _match, _min_uV, n_volt, vstep, vreg, vmask,\
 			  ereg, emask, odelay, ecomask, ecoamp)		\
 	[HI6421_##_id] = {						\
 		.desc = {						\
 			.name		= #_id,				\
 			.of_match        = #_match,			\
 			.regulators_node = "regulators",		\
 			.ops		= &hi6421_ldo_linear_ops,	\
 			.type		= REGULATOR_VOLTAGE,		\
 			.id		= HI6421_##_id,			\
 			.owner		= THIS_MODULE,			\
 			.min_uV		= _min_uV,			\
 			.n_voltages	= n_volt,			\
 			.uV_step	= vstep,			\
 			.vsel_reg	= HI6421_REG_TO_BUS_ADDR(vreg),	\
 			.vsel_mask	= vmask,			\
 			.enable_reg	= HI6421_REG_TO_BUS_ADDR(ereg),	\
 			.enable_mask	= emask,			\
 			.enable_time	= HI6421_LDO_ENABLE_TIME,	\
 			.off_on_delay	= odelay,			\
 		},							\
 		.mode_mask		= ecomask,			\
 		.eco_microamp		= ecoamp,			\
 	}

 /* HI6421 LDOAUDIO is a linear voltage regulator with two 4-step ranges
  *
  * _id - LDO id name string
  * _match - of match name string
  * n_volt - number of votages available
  * volt_ranges - array of linear_range
  * vstep - voltage increase in each linear step in uV
  * vreg - voltage select register
  * vmask - voltage select mask
  * ereg - enable register
  * emask - enable mask
  * odelay - off/on delay time in uS
  * ecomask - eco mode mask
  * ecoamp - eco mode load uppler limit in uA
  */
 #define HI6421_LDO_LINEAR_RANGE(_id, _match, n_volt, volt_ranges, vreg, vmask,\
 				ereg, emask, odelay, ecomask, ecoamp)	\
 	[HI6421_##_id] = {						\
 		.desc = {						\
 			.name		= #_id,				\
 			.of_match        = #_match,			\
 			.regulators_node = "regulators",		\
 			.ops		= &hi6421_ldo_linear_range_ops,	\
 			.type		= REGULATOR_VOLTAGE,		\
 			.id		= HI6421_##_id,			\
 			.owner		= THIS_MODULE,			\
 			.n_voltages	= n_volt,			\
 			.linear_ranges	= volt_ranges,			\
 			.n_linear_ranges = ARRAY_SIZE(volt_ranges),	\
 			.vsel_reg	= HI6421_REG_TO_BUS_ADDR(vreg),	\
 			.vsel_mask	= vmask,			\
 			.enable_reg	= HI6421_REG_TO_BUS_ADDR(ereg),	\
 			.enable_mask	= emask,			\
 			.enable_time	= HI6421_LDO_ENABLE_TIME,	\
 			.off_on_delay	= odelay,			\
 		},							\
 		.mode_mask		= ecomask,			\
 		.eco_microamp		= ecoamp,			\
 	}

 /* HI6421 BUCK0/1/2 are linear voltage regulators at fixed uV_step
  *
  * _id - BUCK0/1/2 id name string
  * _match - of match name string
  * vreg - voltage select register
  * vmask - voltage select mask
  * ereg - enable register
  * emask - enable mask
  * sleepmask - mask of sleep mode
  * etime - enable time
  * odelay - off/on delay time in uS
  */
 #define HI6421_BUCK012(_id, _match, vreg, vmask, ereg, emask, sleepmask,\
 			etime, odelay)					\
 	[HI6421_##_id] = {						\
 		.desc = {						\
 			.name		= #_id,				\
 			.of_match        = #_match,			\
 			.regulators_node = "regulators",		\
 			.ops		= &hi6421_buck012_ops,		\
 			.type		= REGULATOR_VOLTAGE,		\
 			.id		= HI6421_##_id,			\
 			.owner		= THIS_MODULE,			\
 			.min_uV		= 700000,			\
 			.n_voltages	= 128,				\
 			.uV_step	= 7086,				\
 			.vsel_reg	= HI6421_REG_TO_BUS_ADDR(vreg),	\
 			.vsel_mask	= vmask,			\
 			.enable_reg	= HI6421_REG_TO_BUS_ADDR(ereg),	\
 			.enable_mask	= emask,			\
 			.enable_time	= etime,			\
 			.off_on_delay	= odelay,			\
 		},							\
 		.mode_mask		= sleepmask,			\
 	}

 /* HI6421 BUCK3/4/5 share similar configurations as LDOs, with exception
  *  that it supports SLEEP mode, so has different .ops.
  *
  * _id - LDO id name string
  * _match - of match name string
  * v_table - voltage table
  * vreg - voltage select register
  * vmask - voltage select mask
  * ereg - enable register
  * emask - enable mask
  * odelay - off/on delay time in uS
  * sleepmask - mask of sleep mode
  */
 #define HI6421_BUCK345(_id, _match, v_table, vreg, vmask, ereg, emask,	\
 			odelay, sleepmask)				\
 	[HI6421_##_id] = {						\
 		.desc = {						\
 			.name		= #_id,				\
 			.of_match        = #_match,			\
 			.regulators_node = "regulators",		\
 			.ops		= &hi6421_buck345_ops,		\
 			.type		= REGULATOR_VOLTAGE,		\
 			.id		= HI6421_##_id,			\
 			.owner		= THIS_MODULE,			\
 			.n_voltages	= ARRAY_SIZE(v_table),		\
 			.volt_table	= v_table,			\
 			.vsel_reg	= HI6421_REG_TO_BUS_ADDR(vreg),	\
 			.vsel_mask	= vmask,			\
 			.enable_reg	= HI6421_REG_TO_BUS_ADDR(ereg),	\
 			.enable_mask	= emask,			\
 			.enable_time	= HI6421_LDO_ENABLE_TIME,	\
 			.off_on_delay	= odelay,			\
 		},							\
 		.mode_mask		= sleepmask,			\
 	}

 /* HI6421 regulator information */
 static const struct hi6421_regulator_info
 		hi6421_regulator_info[HI6421_NUM_REGULATORS] = {
 	HI6421_LDO(LDO0, hi6421_vout0, ldo_0_voltages, 0x20, 0x07, 0x20, 0x10,
 		   10000, 0x20, 8000),
 	HI6421_LDO_LINEAR(LDO1, hi6421_vout1, 1700000, 4, 100000, 0x21, 0x03,
 			  0x21, 0x10, 10000, 0x20, 5000),
 	HI6421_LDO_LINEAR(LDO2, hi6421_vout2, 1050000, 8, 50000, 0x22, 0x07,
 			  0x22, 0x10, 20000, 0x20, 8000),
 	HI6421_LDO_LINEAR(LDO3, hi6421_vout3, 1050000, 8, 50000, 0x23, 0x07,
 			  0x23, 0x10, 20000, 0x20, 8000),
 	HI6421_LDO(LDO4, hi6421_vout4, ldo_0_voltages, 0x24, 0x07, 0x24, 0x10,
 		   20000, 0x20, 8000),
 	HI6421_LDO(LDO5, hi6421_vout5, ldo_0_voltages, 0x25, 0x07, 0x25, 0x10,
 		   20000, 0x20, 8000),
 	HI6421_LDO(LDO6, hi6421_vout6, ldo_0_voltages, 0x26, 0x07, 0x26, 0x10,
 		   20000, 0x20, 8000),
 	HI6421_LDO(LDO7, hi6421_vout7, ldo_0_voltages, 0x27, 0x07, 0x27, 0x10,
 		   20000, 0x20, 5000),
 	HI6421_LDO(LDO8, hi6421_vout8, ldo_8_voltages, 0x28, 0x07, 0x28, 0x10,
 		   20000, 0x20, 8000),
 	HI6421_LDO(LDO9, hi6421_vout9, ldo_0_voltages, 0x29, 0x07, 0x29, 0x10,
 		   40000, 0x20, 8000),
 	HI6421_LDO(LDO10, hi6421_vout10, ldo_0_voltages, 0x2a, 0x07, 0x2a, 0x10,
 		   40000, 0x20, 8000),
 	HI6421_LDO(LDO11, hi6421_vout11, ldo_0_voltages, 0x2b, 0x07, 0x2b, 0x10,
 		   40000, 0x20, 8000),
 	HI6421_LDO(LDO12, hi6421_vout12, ldo_0_voltages, 0x2c, 0x07, 0x2c, 0x10,
 		   40000, 0x20, 8000),
 	HI6421_LDO(LDO13, hi6421_vout13, ldo_0_voltages, 0x2d, 0x07, 0x2d, 0x10,
 		   40000, 0x20, 8000),
 	HI6421_LDO(LDO14, hi6421_vout14, ldo_0_voltages, 0x2e, 0x07, 0x2e, 0x10,
 		   40000, 0x20, 8000),
 	HI6421_LDO(LDO15, hi6421_vout15, ldo_8_voltages, 0x2f, 0x07, 0x2f, 0x10,
 		   40000, 0x20, 8000),
 	HI6421_LDO(LDO16, hi6421_vout16, ldo_0_voltages, 0x30, 0x07, 0x30, 0x10,
 		   40000, 0x20, 8000),
 	HI6421_LDO(LDO17, hi6421_vout17, ldo_0_voltages, 0x31, 0x07, 0x31, 0x10,
 		   40000, 0x20, 8000),
 	HI6421_LDO(LDO18, hi6421_vout18, ldo_0_voltages, 0x32, 0x07, 0x32, 0x10,
 		   40000, 0x20, 8000),
 	HI6421_LDO(LDO19, hi6421_vout19, ldo_0_voltages, 0x33, 0x07, 0x33, 0x10,
 		   40000, 0x20, 8000),
 	HI6421_LDO(LDO20, hi6421_vout20, ldo_0_voltages, 0x34, 0x07, 0x34, 0x10,
 		   40000, 0x20, 8000),
 	HI6421_LDO_LINEAR_RANGE(LDOAUDIO, hi6421_vout_audio, 8,
 				ldo_audio_volt_range, 0x36, 0x70, 0x36, 0x01,
 				40000, 0x02, 5000),
 	HI6421_BUCK012(BUCK0, hi6421_buck0, 0x0d, 0x7f, 0x0c, 0x01, 0x10, 400,
 		       20000),
 	HI6421_BUCK012(BUCK1, hi6421_buck1, 0x0f, 0x7f, 0x0e, 0x01, 0x10, 400,
 		       20000),
 	HI6421_BUCK012(BUCK2, hi6421_buck2, 0x11, 0x7f, 0x10, 0x01, 0x10, 350,
 		       100),
 	HI6421_BUCK345(BUCK3, hi6421_buck3, buck_3_voltages, 0x13, 0x07, 0x12,
 		       0x01, 20000, 0x10),
 	HI6421_BUCK345(BUCK4, hi6421_buck4, buck_4_voltages, 0x15, 0x07, 0x14,
 		       0x01, 20000, 0x10),
 	HI6421_BUCK345(BUCK5, hi6421_buck5, buck_5_voltages, 0x17, 0x07, 0x16,
 		       0x01, 20000, 0x10),
 };

 static int hi6421_regulator_enable(struct regulator_dev *rdev)
 {
 	struct hi6421_regulator_pdata *pdata = rdev_get_drvdata(rdev);

 	/* hi6421 spec requires regulator enablement must be serialized:
 	 *  - Because when BUCK, LDO switching from off to on, it will have
 	 *    a huge instantaneous current; so you can not turn on two or
 	 *    more LDO or BUCKs simultaneously, or it may burn the chip.
 	 */
 	mutex_lock(&pdata->lock);

 	/* call regulator regmap helper */
 	regulator_enable_regmap(rdev);

 	mutex_unlock(&pdata->lock);
 	return 0;
 }

 static unsigned int hi6421_regulator_ldo_get_mode(struct regulator_dev *rdev)
 {
 	const struct hi6421_regulator_info *info;
 	unsigned int reg_val;

 	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
 	regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 	if (reg_val & info->mode_mask)
 		return REGULATOR_MODE_IDLE;

 	return REGULATOR_MODE_NORMAL;
 }

 static unsigned int hi6421_regulator_buck_get_mode(struct regulator_dev *rdev)
 {
 	const struct hi6421_regulator_info *info;
 	unsigned int reg_val;

 	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
 	regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
 	if (reg_val & info->mode_mask)
 		return REGULATOR_MODE_STANDBY;

 	return REGULATOR_MODE_NORMAL;
 }

 static int hi6421_regulator_ldo_set_mode(struct regulator_dev *rdev,
 						unsigned int mode)
 {
 	const struct hi6421_regulator_info *info;
 	unsigned int new_mode;

 	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
 	switch (mode) {
 	case REGULATOR_MODE_NORMAL:
 		new_mode = 0;
 		break;
 	case REGULATOR_MODE_IDLE:
 		new_mode = info->mode_mask;
 		break;
 	default:
 		return -EINVAL;
 	}

 	/* set mode */
 	regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 			   info->mode_mask, new_mode);

 	return 0;
 }

 static int hi6421_regulator_buck_set_mode(struct regulator_dev *rdev,
 						unsigned int mode)
 {
 	const struct hi6421_regulator_info *info;
 	unsigned int new_mode;

 	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
 	switch (mode) {
 	case REGULATOR_MODE_NORMAL:
 		new_mode = 0;
 		break;
 	case REGULATOR_MODE_STANDBY:
 		new_mode = info->mode_mask;
 		break;
 	default:
 		return -EINVAL;
 	}

 	/* set mode */
 	regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 			   info->mode_mask, new_mode);

 	return 0;
 }

 static unsigned int
 hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev,
 			int input_uV, int output_uV, int load_uA)
 {
 	const struct hi6421_regulator_info *info;

 	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);

 	if (load_uA > info->eco_microamp)
 		return REGULATOR_MODE_NORMAL;

 	return REGULATOR_MODE_IDLE;
 }

 static const struct regulator_ops hi6421_ldo_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = hi6421_regulator_enable,
 	.disable = regulator_disable_regmap,
 	.list_voltage = regulator_list_voltage_table,
 	.map_voltage = regulator_map_voltage_ascend,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_mode = hi6421_regulator_ldo_get_mode,
 	.set_mode = hi6421_regulator_ldo_set_mode,
 	.get_optimum_mode = hi6421_regulator_ldo_get_optimum_mode,
 };

 static const struct regulator_ops hi6421_ldo_linear_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = hi6421_regulator_enable,
 	.disable = regulator_disable_regmap,
 	.list_voltage = regulator_list_voltage_linear,
 	.map_voltage = regulator_map_voltage_linear,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_mode = hi6421_regulator_ldo_get_mode,
 	.set_mode = hi6421_regulator_ldo_set_mode,
 	.get_optimum_mode = hi6421_regulator_ldo_get_optimum_mode,
 };

 static const struct regulator_ops hi6421_ldo_linear_range_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = hi6421_regulator_enable,
 	.disable = regulator_disable_regmap,
 	.list_voltage = regulator_list_voltage_linear_range,
 	.map_voltage = regulator_map_voltage_linear_range,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_mode = hi6421_regulator_ldo_get_mode,
 	.set_mode = hi6421_regulator_ldo_set_mode,
 	.get_optimum_mode = hi6421_regulator_ldo_get_optimum_mode,
 };

 static const struct regulator_ops hi6421_buck012_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = hi6421_regulator_enable,
 	.disable = regulator_disable_regmap,
 	.list_voltage = regulator_list_voltage_linear,
 	.map_voltage = regulator_map_voltage_linear,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_mode = hi6421_regulator_buck_get_mode,
 	.set_mode = hi6421_regulator_buck_set_mode,
 };

 static const struct regulator_ops hi6421_buck345_ops = {
 	.is_enabled = regulator_is_enabled_regmap,
 	.enable = hi6421_regulator_enable,
 	.disable = regulator_disable_regmap,
 	.list_voltage = regulator_list_voltage_table,
 	.map_voltage = regulator_map_voltage_ascend,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_mode = hi6421_regulator_buck_get_mode,
 	.set_mode = hi6421_regulator_buck_set_mode,
 };

 static int hi6421_regulator_probe(struct platform_device *pdev)
 {
 	struct hi6421_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
 	struct hi6421_regulator_pdata *pdata;
 	const struct hi6421_regulator_info *info;
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
 	int i;

 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
 		return -ENOMEM;
 	mutex_init(&pdata->lock);

 	for (i = 0; i < ARRAY_SIZE(hi6421_regulator_info); i++) {
 		/* assign per-regulator data */
 		info = &hi6421_regulator_info[i];

 		config.dev = pdev->dev.parent;
 		config.driver_data = pdata;
 		config.regmap = pmic->regmap;

 		rdev = devm_regulator_register(&pdev->dev, &info->desc,
 					       &config);
 		if (IS_ERR(rdev)) {
 			dev_err(&pdev->dev, "failed to register regulator %s\n",
 				info->desc.name);
 			return PTR_ERR(rdev);
 		}
 	}

 	return 0;
 }

 static const struct platform_device_id hi6421_regulator_table[] = {
 	{ .name = "hi6421-regulator" },
 	{},
 };
 MODULE_DEVICE_TABLE(platform, hi6421_regulator_table);

 static struct platform_driver hi6421_regulator_driver = {
 	.id_table = hi6421_regulator_table,
 	.driver = {
 		.name	= "hi6421-regulator",
 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 	},
 	.probe	= hi6421_regulator_probe,
 };
 module_platform_driver(hi6421_regulator_driver);

 MODULE_AUTHOR("Guodong Xu <[email protected]>");
 MODULE_DESCRIPTION("Hi6421 regulator driver");
 MODULE_LICENSE("GPL v2");
	// SPDX-License-Identifier: GPL-2.0
	//
	// Device driver for regulators in Hi6421 IC
	//
	// Copyright (c) <2011-2014> HiSilicon Technologies Co., Ltd.
	// http://www.hisilicon.com
	// Copyright (c) <2013-2014> Linaro Ltd.
	// https://www.linaro.org
	//
	// Author: Guodong Xu <[email protected]>

	#include <linux/slab.h>
	#include <linux/device.h>
	#include <linux/module.h>
	#include <linux/err.h>
	#include <linux/platform_device.h>
	#include <linux/of.h>
	#include <linux/regmap.h>
	#include <linux/regulator/driver.h>
	#include <linux/regulator/machine.h>
	#include <linux/regulator/of_regulator.h>
	#include <linux/mfd/hi6421-pmic.h>

	/*
	* struct hi6421_regulator_pdata - Hi6421 regulator data of platform device
	* @lock: mutex to serialize regulator enable
	*/
	struct hi6421_regulator_pdata {
	struct mutex lock;
	};

	/*
	* struct hi6421_regulator_info - hi6421 regulator information
	* @desc: regulator description
	* @mode_mask: ECO mode bitmask of LDOs; for BUCKs, this masks sleep
	* @eco_microamp: eco mode load upper limit (in uA), valid for LDOs only
	*/
	struct hi6421_regulator_info {
	struct regulator_desc desc;
	u8 mode_mask;
	u32 eco_microamp;
	};

	/* HI6421 regulators */
	enum hi6421_regulator_id {
	HI6421_LDO0,
	HI6421_LDO1,
	HI6421_LDO2,
	HI6421_LDO3,
	HI6421_LDO4,
	HI6421_LDO5,
	HI6421_LDO6,
	HI6421_LDO7,
	HI6421_LDO8,
	HI6421_LDO9,
	HI6421_LDO10,
	HI6421_LDO11,
	HI6421_LDO12,
	HI6421_LDO13,
	HI6421_LDO14,
	HI6421_LDO15,
	HI6421_LDO16,
	HI6421_LDO17,
	HI6421_LDO18,
	HI6421_LDO19,
	HI6421_LDO20,
	HI6421_LDOAUDIO,
	HI6421_BUCK0,
	HI6421_BUCK1,
	HI6421_BUCK2,
	HI6421_BUCK3,
	HI6421_BUCK4,
	HI6421_BUCK5,
	HI6421_NUM_REGULATORS,
	};

	/* LDO 0, 4~7, 9~14, 16~20 have same voltage table. */
	static const unsigned int ldo_0_voltages[] = {
	1500000, 1800000, 2400000, 2500000,
	2600000, 2700000, 2850000, 3000000,
	};

	/* LDO 8, 15 have same voltage table. */
	static const unsigned int ldo_8_voltages[] = {
	1500000, 1800000, 2400000, 2600000,
	2700000, 2850000, 3000000, 3300000,
	};

	/* Ranges are sorted in ascending order. */
	static const struct linear_range ldo_audio_volt_range[] = {
	REGULATOR_LINEAR_RANGE(2800000, 0, 3, 50000),
	REGULATOR_LINEAR_RANGE(3000000, 4, 7, 100000),
	};

	static const unsigned int buck_3_voltages[] = {
	950000, 1050000, 1100000, 1117000,
	1134000, 1150000, 1167000, 1200000,
	};

	static const unsigned int buck_4_voltages[] = {
	1150000, 1200000, 1250000, 1350000,
	1700000, 1800000, 1900000, 2000000,
	};

	static const unsigned int buck_5_voltages[] = {
	1150000, 1200000, 1250000, 1350000,
	1600000, 1700000, 1800000, 1900000,
	};

	static const struct regulator_ops hi6421_ldo_ops;
	static const struct regulator_ops hi6421_ldo_linear_ops;
	static const struct regulator_ops hi6421_ldo_linear_range_ops;
	static const struct regulator_ops hi6421_buck012_ops;
	static const struct regulator_ops hi6421_buck345_ops;

	#define HI6421_LDO_ENABLE_TIME (350)
	/*
	* _id - LDO id name string
	* _match - of match name string
	* v_table - voltage table
	* vreg - voltage select register
	* vmask - voltage select mask
	* ereg - enable register
	* emask - enable mask
	* odelay - off/on delay time in uS
	* ecomask - eco mode mask
	* ecoamp - eco mode load uppler limit in uA
	*/
	#define HI6421_LDO(_id, _match, v_table, vreg, vmask, ereg, emask, \
	odelay, ecomask, ecoamp) \
	[HI6421_##_id] = { \
	.desc = { \
	.name = #_id, \
	.of_match = #_match, \
	.regulators_node = "regulators", \
	.ops = &hi6421_ldo_ops, \
	.type = REGULATOR_VOLTAGE, \
	.id = HI6421_##_id, \
	.owner = THIS_MODULE, \
	.n_voltages = ARRAY_SIZE(v_table), \
	.volt_table = v_table, \
	.vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \
	.vsel_mask = vmask, \
	.enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \
	.enable_mask = emask, \
	.enable_time = HI6421_LDO_ENABLE_TIME, \
	.off_on_delay = odelay, \
	}, \
	.mode_mask = ecomask, \
	.eco_microamp = ecoamp, \
	}

	/* HI6421 LDO1~3 are linear voltage regulators at fixed uV_step
	*
	* _id - LDO id name string
	* _match - of match name string
	* _min_uV - minimum voltage supported in uV
	* n_volt - number of votages available
	* vstep - voltage increase in each linear step in uV
	* vreg - voltage select register
	* vmask - voltage select mask
	* ereg - enable register
	* emask - enable mask
	* odelay - off/on delay time in uS
	* ecomask - eco mode mask
	* ecoamp - eco mode load uppler limit in uA
	*/
	#define HI6421_LDO_LINEAR(_id, _match, _min_uV, n_volt, vstep, vreg, vmask,\
	ereg, emask, odelay, ecomask, ecoamp) \
	[HI6421_##_id] = { \
	.desc = { \
	.name = #_id, \
	.of_match = #_match, \
	.regulators_node = "regulators", \
	.ops = &hi6421_ldo_linear_ops, \
	.type = REGULATOR_VOLTAGE, \
	.id = HI6421_##_id, \
	.owner = THIS_MODULE, \
	.min_uV = _min_uV, \
	.n_voltages = n_volt, \
	.uV_step = vstep, \
	.vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \
	.vsel_mask = vmask, \
	.enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \
	.enable_mask = emask, \
	.enable_time = HI6421_LDO_ENABLE_TIME, \
	.off_on_delay = odelay, \
	}, \
	.mode_mask = ecomask, \
	.eco_microamp = ecoamp, \
	}

	/* HI6421 LDOAUDIO is a linear voltage regulator with two 4-step ranges
	*
	* _id - LDO id name string
	* _match - of match name string
	* n_volt - number of votages available
	* volt_ranges - array of linear_range
	* vstep - voltage increase in each linear step in uV
	* vreg - voltage select register
	* vmask - voltage select mask
	* ereg - enable register
	* emask - enable mask
	* odelay - off/on delay time in uS
	* ecomask - eco mode mask
	* ecoamp - eco mode load uppler limit in uA
	*/
	#define HI6421_LDO_LINEAR_RANGE(_id, _match, n_volt, volt_ranges, vreg, vmask,\
	ereg, emask, odelay, ecomask, ecoamp) \
	[HI6421_##_id] = { \
	.desc = { \
	.name = #_id, \
	.of_match = #_match, \
	.regulators_node = "regulators", \
	.ops = &hi6421_ldo_linear_range_ops, \
	.type = REGULATOR_VOLTAGE, \
	.id = HI6421_##_id, \
	.owner = THIS_MODULE, \
	.n_voltages = n_volt, \
	.linear_ranges = volt_ranges, \
	.n_linear_ranges = ARRAY_SIZE(volt_ranges), \
	.vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \
	.vsel_mask = vmask, \
	.enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \
	.enable_mask = emask, \
	.enable_time = HI6421_LDO_ENABLE_TIME, \
	.off_on_delay = odelay, \
	}, \
	.mode_mask = ecomask, \
	.eco_microamp = ecoamp, \
	}

	/* HI6421 BUCK0/1/2 are linear voltage regulators at fixed uV_step
	*
	* _id - BUCK0/1/2 id name string
	* _match - of match name string
	* vreg - voltage select register
	* vmask - voltage select mask
	* ereg - enable register
	* emask - enable mask
	* sleepmask - mask of sleep mode
	* etime - enable time
	* odelay - off/on delay time in uS
	*/
	#define HI6421_BUCK012(_id, _match, vreg, vmask, ereg, emask, sleepmask,\
	etime, odelay) \
	[HI6421_##_id] = { \
	.desc = { \
	.name = #_id, \
	.of_match = #_match, \
	.regulators_node = "regulators", \
	.ops = &hi6421_buck012_ops, \
	.type = REGULATOR_VOLTAGE, \
	.id = HI6421_##_id, \
	.owner = THIS_MODULE, \
	.min_uV = 700000, \
	.n_voltages = 128, \
	.uV_step = 7086, \
	.vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \
	.vsel_mask = vmask, \
	.enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \
	.enable_mask = emask, \
	.enable_time = etime, \
	.off_on_delay = odelay, \
	}, \
	.mode_mask = sleepmask, \
	}

	/* HI6421 BUCK3/4/5 share similar configurations as LDOs, with exception
	* that it supports SLEEP mode, so has different .ops.
	*
	* _id - LDO id name string
	* _match - of match name string
	* v_table - voltage table
	* vreg - voltage select register
	* vmask - voltage select mask
	* ereg - enable register
	* emask - enable mask
	* odelay - off/on delay time in uS
	* sleepmask - mask of sleep mode
	*/
	#define HI6421_BUCK345(_id, _match, v_table, vreg, vmask, ereg, emask, \
	odelay, sleepmask) \
	[HI6421_##_id] = { \
	.desc = { \
	.name = #_id, \
	.of_match = #_match, \
	.regulators_node = "regulators", \
	.ops = &hi6421_buck345_ops, \
	.type = REGULATOR_VOLTAGE, \
	.id = HI6421_##_id, \
	.owner = THIS_MODULE, \
	.n_voltages = ARRAY_SIZE(v_table), \
	.volt_table = v_table, \
	.vsel_reg = HI6421_REG_TO_BUS_ADDR(vreg), \
	.vsel_mask = vmask, \
	.enable_reg = HI6421_REG_TO_BUS_ADDR(ereg), \
	.enable_mask = emask, \
	.enable_time = HI6421_LDO_ENABLE_TIME, \
	.off_on_delay = odelay, \
	}, \
	.mode_mask = sleepmask, \
	}

	/* HI6421 regulator information */
	static const struct hi6421_regulator_info
	hi6421_regulator_info[HI6421_NUM_REGULATORS] = {
	HI6421_LDO(LDO0, hi6421_vout0, ldo_0_voltages, 0x20, 0x07, 0x20, 0x10,
	10000, 0x20, 8000),
	HI6421_LDO_LINEAR(LDO1, hi6421_vout1, 1700000, 4, 100000, 0x21, 0x03,
	0x21, 0x10, 10000, 0x20, 5000),
	HI6421_LDO_LINEAR(LDO2, hi6421_vout2, 1050000, 8, 50000, 0x22, 0x07,
	0x22, 0x10, 20000, 0x20, 8000),
	HI6421_LDO_LINEAR(LDO3, hi6421_vout3, 1050000, 8, 50000, 0x23, 0x07,
	0x23, 0x10, 20000, 0x20, 8000),
	HI6421_LDO(LDO4, hi6421_vout4, ldo_0_voltages, 0x24, 0x07, 0x24, 0x10,
	20000, 0x20, 8000),
	HI6421_LDO(LDO5, hi6421_vout5, ldo_0_voltages, 0x25, 0x07, 0x25, 0x10,
	20000, 0x20, 8000),
	HI6421_LDO(LDO6, hi6421_vout6, ldo_0_voltages, 0x26, 0x07, 0x26, 0x10,
	20000, 0x20, 8000),
	HI6421_LDO(LDO7, hi6421_vout7, ldo_0_voltages, 0x27, 0x07, 0x27, 0x10,
	20000, 0x20, 5000),
	HI6421_LDO(LDO8, hi6421_vout8, ldo_8_voltages, 0x28, 0x07, 0x28, 0x10,
	20000, 0x20, 8000),
	HI6421_LDO(LDO9, hi6421_vout9, ldo_0_voltages, 0x29, 0x07, 0x29, 0x10,
	40000, 0x20, 8000),
	HI6421_LDO(LDO10, hi6421_vout10, ldo_0_voltages, 0x2a, 0x07, 0x2a, 0x10,
	40000, 0x20, 8000),
	HI6421_LDO(LDO11, hi6421_vout11, ldo_0_voltages, 0x2b, 0x07, 0x2b, 0x10,
	40000, 0x20, 8000),
	HI6421_LDO(LDO12, hi6421_vout12, ldo_0_voltages, 0x2c, 0x07, 0x2c, 0x10,
	40000, 0x20, 8000),
	HI6421_LDO(LDO13, hi6421_vout13, ldo_0_voltages, 0x2d, 0x07, 0x2d, 0x10,
	40000, 0x20, 8000),
	HI6421_LDO(LDO14, hi6421_vout14, ldo_0_voltages, 0x2e, 0x07, 0x2e, 0x10,
	40000, 0x20, 8000),
	HI6421_LDO(LDO15, hi6421_vout15, ldo_8_voltages, 0x2f, 0x07, 0x2f, 0x10,
	40000, 0x20, 8000),
	HI6421_LDO(LDO16, hi6421_vout16, ldo_0_voltages, 0x30, 0x07, 0x30, 0x10,
	40000, 0x20, 8000),
	HI6421_LDO(LDO17, hi6421_vout17, ldo_0_voltages, 0x31, 0x07, 0x31, 0x10,
	40000, 0x20, 8000),
	HI6421_LDO(LDO18, hi6421_vout18, ldo_0_voltages, 0x32, 0x07, 0x32, 0x10,
	40000, 0x20, 8000),
	HI6421_LDO(LDO19, hi6421_vout19, ldo_0_voltages, 0x33, 0x07, 0x33, 0x10,
	40000, 0x20, 8000),
	HI6421_LDO(LDO20, hi6421_vout20, ldo_0_voltages, 0x34, 0x07, 0x34, 0x10,
	40000, 0x20, 8000),
	HI6421_LDO_LINEAR_RANGE(LDOAUDIO, hi6421_vout_audio, 8,
	ldo_audio_volt_range, 0x36, 0x70, 0x36, 0x01,
	40000, 0x02, 5000),
	HI6421_BUCK012(BUCK0, hi6421_buck0, 0x0d, 0x7f, 0x0c, 0x01, 0x10, 400,
	20000),
	HI6421_BUCK012(BUCK1, hi6421_buck1, 0x0f, 0x7f, 0x0e, 0x01, 0x10, 400,
	20000),
	HI6421_BUCK012(BUCK2, hi6421_buck2, 0x11, 0x7f, 0x10, 0x01, 0x10, 350,
	100),
	HI6421_BUCK345(BUCK3, hi6421_buck3, buck_3_voltages, 0x13, 0x07, 0x12,
	0x01, 20000, 0x10),
	HI6421_BUCK345(BUCK4, hi6421_buck4, buck_4_voltages, 0x15, 0x07, 0x14,
	0x01, 20000, 0x10),
	HI6421_BUCK345(BUCK5, hi6421_buck5, buck_5_voltages, 0x17, 0x07, 0x16,
	0x01, 20000, 0x10),
	};

	static int hi6421_regulator_enable(struct regulator_dev *rdev)
	{
	struct hi6421_regulator_pdata *pdata = rdev_get_drvdata(rdev);

	/* hi6421 spec requires regulator enablement must be serialized:
	* - Because when BUCK, LDO switching from off to on, it will have
	* a huge instantaneous current; so you can not turn on two or
	* more LDO or BUCKs simultaneously, or it may burn the chip.
	*/
	mutex_lock(&pdata->lock);

	/* call regulator regmap helper */
	regulator_enable_regmap(rdev);

	mutex_unlock(&pdata->lock);
	return 0;
	}

	static unsigned int hi6421_regulator_ldo_get_mode(struct regulator_dev *rdev)
	{
	const struct hi6421_regulator_info *info;
	unsigned int reg_val;

	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
	regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
	if (reg_val & info->mode_mask)
	return REGULATOR_MODE_IDLE;

	return REGULATOR_MODE_NORMAL;
	}

	static unsigned int hi6421_regulator_buck_get_mode(struct regulator_dev *rdev)
	{
	const struct hi6421_regulator_info *info;
	unsigned int reg_val;

	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
	regmap_read(rdev->regmap, rdev->desc->enable_reg, &reg_val);
	if (reg_val & info->mode_mask)
	return REGULATOR_MODE_STANDBY;

	return REGULATOR_MODE_NORMAL;
	}

	static int hi6421_regulator_ldo_set_mode(struct regulator_dev *rdev,
	unsigned int mode)
	{
	const struct hi6421_regulator_info *info;
	unsigned int new_mode;

	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
	switch (mode) {
	case REGULATOR_MODE_NORMAL:
	new_mode = 0;
	break;
	case REGULATOR_MODE_IDLE:
	new_mode = info->mode_mask;
	break;
	default:
	return -EINVAL;
	}

	/* set mode */
	regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
	info->mode_mask, new_mode);

	return 0;
	}

	static int hi6421_regulator_buck_set_mode(struct regulator_dev *rdev,
	unsigned int mode)
	{
	const struct hi6421_regulator_info *info;
	unsigned int new_mode;

	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);
	switch (mode) {
	case REGULATOR_MODE_NORMAL:
	new_mode = 0;
	break;
	case REGULATOR_MODE_STANDBY:
	new_mode = info->mode_mask;
	break;
	default:
	return -EINVAL;
	}

	/* set mode */
	regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
	info->mode_mask, new_mode);

	return 0;
	}

	static unsigned int
	hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev,
	int input_uV, int output_uV, int load_uA)
	{
	const struct hi6421_regulator_info *info;

	info = container_of(rdev->desc, struct hi6421_regulator_info, desc);

	if (load_uA > info->eco_microamp)
	return REGULATOR_MODE_NORMAL;

	return REGULATOR_MODE_IDLE;
	}

	static const struct regulator_ops hi6421_ldo_ops = {
	.is_enabled = regulator_is_enabled_regmap,
	.enable = hi6421_regulator_enable,
	.disable = regulator_disable_regmap,
	.list_voltage = regulator_list_voltage_table,
	.map_voltage = regulator_map_voltage_ascend,
	.get_voltage_sel = regulator_get_voltage_sel_regmap,
	.set_voltage_sel = regulator_set_voltage_sel_regmap,
	.get_mode = hi6421_regulator_ldo_get_mode,
	.set_mode = hi6421_regulator_ldo_set_mode,
	.get_optimum_mode = hi6421_regulator_ldo_get_optimum_mode,
	};

	static const struct regulator_ops hi6421_ldo_linear_ops = {
	.is_enabled = regulator_is_enabled_regmap,
	.enable = hi6421_regulator_enable,
	.disable = regulator_disable_regmap,
	.list_voltage = regulator_list_voltage_linear,
	.map_voltage = regulator_map_voltage_linear,
	.get_voltage_sel = regulator_get_voltage_sel_regmap,
	.set_voltage_sel = regulator_set_voltage_sel_regmap,
	.get_mode = hi6421_regulator_ldo_get_mode,
	.set_mode = hi6421_regulator_ldo_set_mode,
	.get_optimum_mode = hi6421_regulator_ldo_get_optimum_mode,
	};

	static const struct regulator_ops hi6421_ldo_linear_range_ops = {
	.is_enabled = regulator_is_enabled_regmap,
	.enable = hi6421_regulator_enable,
	.disable = regulator_disable_regmap,
	.list_voltage = regulator_list_voltage_linear_range,
	.map_voltage = regulator_map_voltage_linear_range,
	.get_voltage_sel = regulator_get_voltage_sel_regmap,
	.set_voltage_sel = regulator_set_voltage_sel_regmap,
	.get_mode = hi6421_regulator_ldo_get_mode,
	.set_mode = hi6421_regulator_ldo_set_mode,
	.get_optimum_mode = hi6421_regulator_ldo_get_optimum_mode,
	};

	static const struct regulator_ops hi6421_buck012_ops = {
	.is_enabled = regulator_is_enabled_regmap,
	.enable = hi6421_regulator_enable,
	.disable = regulator_disable_regmap,
	.list_voltage = regulator_list_voltage_linear,
	.map_voltage = regulator_map_voltage_linear,
	.get_voltage_sel = regulator_get_voltage_sel_regmap,
	.set_voltage_sel = regulator_set_voltage_sel_regmap,
	.get_mode = hi6421_regulator_buck_get_mode,
	.set_mode = hi6421_regulator_buck_set_mode,
	};

	static const struct regulator_ops hi6421_buck345_ops = {
	.is_enabled = regulator_is_enabled_regmap,
	.enable = hi6421_regulator_enable,
	.disable = regulator_disable_regmap,
	.list_voltage = regulator_list_voltage_table,
	.map_voltage = regulator_map_voltage_ascend,
	.get_voltage_sel = regulator_get_voltage_sel_regmap,
	.set_voltage_sel = regulator_set_voltage_sel_regmap,
	.get_mode = hi6421_regulator_buck_get_mode,
	.set_mode = hi6421_regulator_buck_set_mode,
	};

	static int hi6421_regulator_probe(struct platform_device *pdev)
	{
	struct hi6421_pmic *pmic = dev_get_drvdata(pdev->dev.parent);
	struct hi6421_regulator_pdata *pdata;
	const struct hi6421_regulator_info *info;
	struct regulator_config config = { };
	struct regulator_dev *rdev;
	int i;

	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
	if (!pdata)
	return -ENOMEM;
	mutex_init(&pdata->lock);

	for (i = 0; i < ARRAY_SIZE(hi6421_regulator_info); i++) {
	/* assign per-regulator data */
	info = &hi6421_regulator_info[i];

	config.dev = pdev->dev.parent;
	config.driver_data = pdata;
	config.regmap = pmic->regmap;

	rdev = devm_regulator_register(&pdev->dev, &info->desc,
	&config);
	if (IS_ERR(rdev)) {
	dev_err(&pdev->dev, "failed to register regulator %s\n",
	info->desc.name);
	return PTR_ERR(rdev);
	}
	}

	return 0;
	}

	static const struct platform_device_id hi6421_regulator_table[] = {
	{ .name = "hi6421-regulator" },
	{},
	};
	MODULE_DEVICE_TABLE(platform, hi6421_regulator_table);

	static struct platform_driver hi6421_regulator_driver = {
	.id_table = hi6421_regulator_table,
	.driver = {
	.name = "hi6421-regulator",
	.probe_type = PROBE_PREFER_ASYNCHRONOUS,
	},
	.probe = hi6421_regulator_probe,
	};
	module_platform_driver(hi6421_regulator_driver);

	MODULE_AUTHOR("Guodong Xu <[email protected]>");
	MODULE_DESCRIPTION("Hi6421 regulator driver");
	MODULE_LICENSE("GPL v2");