|  | /* | 
|  | *  Universal power supply monitor class | 
|  | * | 
|  | *  Copyright © 2007  Anton Vorontsov <[email protected]> | 
|  | *  Copyright © 2004  Szabolcs Gyurko | 
|  | *  Copyright © 2003  Ian Molton <[email protected]> | 
|  | * | 
|  | *  Modified: 2004, Oct     Szabolcs Gyurko | 
|  | * | 
|  | *  You may use this code as per GPL version 2 | 
|  | */ | 
|  |  | 
|  | #ifndef __LINUX_POWER_SUPPLY_H__ | 
|  | #define __LINUX_POWER_SUPPLY_H__ | 
|  |  | 
|  | #include <linux/device.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/leds.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/notifier.h> | 
|  |  | 
|  | /* | 
|  | * All voltages, currents, charges, energies, time and temperatures in uV, | 
|  | * µA, µAh, µWh, seconds and tenths of degree Celsius unless otherwise | 
|  | * stated. It's driver's job to convert its raw values to units in which | 
|  | * this class operates. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * For systems where the charger determines the maximum battery capacity | 
|  | * the min and max fields should be used to present these values to user | 
|  | * space. Unused/unknown fields will not appear in sysfs. | 
|  | */ | 
|  |  | 
|  | enum { | 
|  | POWER_SUPPLY_STATUS_UNKNOWN = 0, | 
|  | POWER_SUPPLY_STATUS_CHARGING, | 
|  | POWER_SUPPLY_STATUS_DISCHARGING, | 
|  | POWER_SUPPLY_STATUS_NOT_CHARGING, | 
|  | POWER_SUPPLY_STATUS_FULL, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | POWER_SUPPLY_CHARGE_TYPE_UNKNOWN = 0, | 
|  | POWER_SUPPLY_CHARGE_TYPE_NONE, | 
|  | POWER_SUPPLY_CHARGE_TYPE_TRICKLE, | 
|  | POWER_SUPPLY_CHARGE_TYPE_FAST, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | POWER_SUPPLY_HEALTH_UNKNOWN = 0, | 
|  | POWER_SUPPLY_HEALTH_GOOD, | 
|  | POWER_SUPPLY_HEALTH_OVERHEAT, | 
|  | POWER_SUPPLY_HEALTH_DEAD, | 
|  | POWER_SUPPLY_HEALTH_OVERVOLTAGE, | 
|  | POWER_SUPPLY_HEALTH_UNSPEC_FAILURE, | 
|  | POWER_SUPPLY_HEALTH_COLD, | 
|  | POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE, | 
|  | POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | POWER_SUPPLY_TECHNOLOGY_UNKNOWN = 0, | 
|  | POWER_SUPPLY_TECHNOLOGY_NiMH, | 
|  | POWER_SUPPLY_TECHNOLOGY_LION, | 
|  | POWER_SUPPLY_TECHNOLOGY_LIPO, | 
|  | POWER_SUPPLY_TECHNOLOGY_LiFe, | 
|  | POWER_SUPPLY_TECHNOLOGY_NiCd, | 
|  | POWER_SUPPLY_TECHNOLOGY_LiMn, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN = 0, | 
|  | POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL, | 
|  | POWER_SUPPLY_CAPACITY_LEVEL_LOW, | 
|  | POWER_SUPPLY_CAPACITY_LEVEL_NORMAL, | 
|  | POWER_SUPPLY_CAPACITY_LEVEL_HIGH, | 
|  | POWER_SUPPLY_CAPACITY_LEVEL_FULL, | 
|  | }; | 
|  |  | 
|  | enum { | 
|  | POWER_SUPPLY_SCOPE_UNKNOWN = 0, | 
|  | POWER_SUPPLY_SCOPE_SYSTEM, | 
|  | POWER_SUPPLY_SCOPE_DEVICE, | 
|  | }; | 
|  |  | 
|  | enum power_supply_property { | 
|  | /* Properties of type `int' */ | 
|  | POWER_SUPPLY_PROP_STATUS = 0, | 
|  | POWER_SUPPLY_PROP_CHARGE_TYPE, | 
|  | POWER_SUPPLY_PROP_HEALTH, | 
|  | POWER_SUPPLY_PROP_PRESENT, | 
|  | POWER_SUPPLY_PROP_ONLINE, | 
|  | POWER_SUPPLY_PROP_AUTHENTIC, | 
|  | POWER_SUPPLY_PROP_TECHNOLOGY, | 
|  | POWER_SUPPLY_PROP_CYCLE_COUNT, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_MAX, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_MIN, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_NOW, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_AVG, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_OCV, | 
|  | POWER_SUPPLY_PROP_VOLTAGE_BOOT, | 
|  | POWER_SUPPLY_PROP_CURRENT_MAX, | 
|  | POWER_SUPPLY_PROP_CURRENT_NOW, | 
|  | POWER_SUPPLY_PROP_CURRENT_AVG, | 
|  | POWER_SUPPLY_PROP_CURRENT_BOOT, | 
|  | POWER_SUPPLY_PROP_POWER_NOW, | 
|  | POWER_SUPPLY_PROP_POWER_AVG, | 
|  | POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, | 
|  | POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN, | 
|  | POWER_SUPPLY_PROP_CHARGE_FULL, | 
|  | POWER_SUPPLY_PROP_CHARGE_EMPTY, | 
|  | POWER_SUPPLY_PROP_CHARGE_NOW, | 
|  | POWER_SUPPLY_PROP_CHARGE_AVG, | 
|  | POWER_SUPPLY_PROP_CHARGE_COUNTER, | 
|  | POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, | 
|  | POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, | 
|  | POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, | 
|  | POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, | 
|  | POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, | 
|  | POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, | 
|  | POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, | 
|  | POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, | 
|  | POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN, | 
|  | POWER_SUPPLY_PROP_ENERGY_FULL, | 
|  | POWER_SUPPLY_PROP_ENERGY_EMPTY, | 
|  | POWER_SUPPLY_PROP_ENERGY_NOW, | 
|  | POWER_SUPPLY_PROP_ENERGY_AVG, | 
|  | POWER_SUPPLY_PROP_CAPACITY, /* in percents! */ | 
|  | POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN, /* in percents! */ | 
|  | POWER_SUPPLY_PROP_CAPACITY_ALERT_MAX, /* in percents! */ | 
|  | POWER_SUPPLY_PROP_CAPACITY_LEVEL, | 
|  | POWER_SUPPLY_PROP_TEMP, | 
|  | POWER_SUPPLY_PROP_TEMP_MAX, | 
|  | POWER_SUPPLY_PROP_TEMP_MIN, | 
|  | POWER_SUPPLY_PROP_TEMP_ALERT_MIN, | 
|  | POWER_SUPPLY_PROP_TEMP_ALERT_MAX, | 
|  | POWER_SUPPLY_PROP_TEMP_AMBIENT, | 
|  | POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MIN, | 
|  | POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MAX, | 
|  | POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW, | 
|  | POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, | 
|  | POWER_SUPPLY_PROP_TIME_TO_FULL_NOW, | 
|  | POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, | 
|  | POWER_SUPPLY_PROP_TYPE, /* use power_supply.type instead */ | 
|  | POWER_SUPPLY_PROP_SCOPE, | 
|  | POWER_SUPPLY_PROP_PRECHARGE_CURRENT, | 
|  | POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT, | 
|  | POWER_SUPPLY_PROP_CALIBRATE, | 
|  | /* Properties of type `const char *' */ | 
|  | POWER_SUPPLY_PROP_MODEL_NAME, | 
|  | POWER_SUPPLY_PROP_MANUFACTURER, | 
|  | POWER_SUPPLY_PROP_SERIAL_NUMBER, | 
|  | }; | 
|  |  | 
|  | enum power_supply_type { | 
|  | POWER_SUPPLY_TYPE_UNKNOWN = 0, | 
|  | POWER_SUPPLY_TYPE_BATTERY, | 
|  | POWER_SUPPLY_TYPE_UPS, | 
|  | POWER_SUPPLY_TYPE_MAINS, | 
|  | POWER_SUPPLY_TYPE_USB,			/* Standard Downstream Port */ | 
|  | POWER_SUPPLY_TYPE_USB_DCP,		/* Dedicated Charging Port */ | 
|  | POWER_SUPPLY_TYPE_USB_CDP,		/* Charging Downstream Port */ | 
|  | POWER_SUPPLY_TYPE_USB_ACA,		/* Accessory Charger Adapters */ | 
|  | POWER_SUPPLY_TYPE_USB_TYPE_C,		/* Type C Port */ | 
|  | POWER_SUPPLY_TYPE_USB_PD,		/* Power Delivery Port */ | 
|  | POWER_SUPPLY_TYPE_USB_PD_DRP,		/* PD Dual Role Port */ | 
|  | POWER_SUPPLY_TYPE_APPLE_BRICK_ID,	/* Apple Charging Method */ | 
|  | }; | 
|  |  | 
|  | enum power_supply_notifier_events { | 
|  | PSY_EVENT_PROP_CHANGED, | 
|  | }; | 
|  |  | 
|  | union power_supply_propval { | 
|  | int intval; | 
|  | const char *strval; | 
|  | }; | 
|  |  | 
|  | struct device_node; | 
|  | struct power_supply; | 
|  |  | 
|  | /* Run-time specific power supply configuration */ | 
|  | struct power_supply_config { | 
|  | struct device_node *of_node; | 
|  | /* Driver private data */ | 
|  | void *drv_data; | 
|  |  | 
|  | char **supplied_to; | 
|  | size_t num_supplicants; | 
|  | }; | 
|  |  | 
|  | /* Description of power supply */ | 
|  | struct power_supply_desc { | 
|  | const char *name; | 
|  | enum power_supply_type type; | 
|  | enum power_supply_property *properties; | 
|  | size_t num_properties; | 
|  |  | 
|  | /* | 
|  | * Functions for drivers implementing power supply class. | 
|  | * These shouldn't be called directly by other drivers for accessing | 
|  | * this power supply. Instead use power_supply_*() functions (for | 
|  | * example power_supply_get_property()). | 
|  | */ | 
|  | int (*get_property)(struct power_supply *psy, | 
|  | enum power_supply_property psp, | 
|  | union power_supply_propval *val); | 
|  | int (*set_property)(struct power_supply *psy, | 
|  | enum power_supply_property psp, | 
|  | const union power_supply_propval *val); | 
|  | /* | 
|  | * property_is_writeable() will be called during registration | 
|  | * of power supply. If this happens during device probe then it must | 
|  | * not access internal data of device (because probe did not end). | 
|  | */ | 
|  | int (*property_is_writeable)(struct power_supply *psy, | 
|  | enum power_supply_property psp); | 
|  | void (*external_power_changed)(struct power_supply *psy); | 
|  | void (*set_charged)(struct power_supply *psy); | 
|  |  | 
|  | /* | 
|  | * Set if thermal zone should not be created for this power supply. | 
|  | * For example for virtual supplies forwarding calls to actual | 
|  | * sensors or other supplies. | 
|  | */ | 
|  | bool no_thermal; | 
|  | /* For APM emulation, think legacy userspace. */ | 
|  | int use_for_apm; | 
|  | }; | 
|  |  | 
|  | struct power_supply { | 
|  | const struct power_supply_desc *desc; | 
|  |  | 
|  | char **supplied_to; | 
|  | size_t num_supplicants; | 
|  |  | 
|  | char **supplied_from; | 
|  | size_t num_supplies; | 
|  | struct device_node *of_node; | 
|  |  | 
|  | /* Driver private data */ | 
|  | void *drv_data; | 
|  |  | 
|  | /* private */ | 
|  | struct device dev; | 
|  | struct work_struct changed_work; | 
|  | struct delayed_work deferred_register_work; | 
|  | spinlock_t changed_lock; | 
|  | bool changed; | 
|  | bool initialized; | 
|  | atomic_t use_cnt; | 
|  | #ifdef CONFIG_THERMAL | 
|  | struct thermal_zone_device *tzd; | 
|  | struct thermal_cooling_device *tcd; | 
|  | #endif | 
|  |  | 
|  | #ifdef CONFIG_LEDS_TRIGGERS | 
|  | struct led_trigger *charging_full_trig; | 
|  | char *charging_full_trig_name; | 
|  | struct led_trigger *charging_trig; | 
|  | char *charging_trig_name; | 
|  | struct led_trigger *full_trig; | 
|  | char *full_trig_name; | 
|  | struct led_trigger *online_trig; | 
|  | char *online_trig_name; | 
|  | struct led_trigger *charging_blink_full_solid_trig; | 
|  | char *charging_blink_full_solid_trig_name; | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * This is recommended structure to specify static power supply parameters. | 
|  | * Generic one, parametrizable for different power supplies. Power supply | 
|  | * class itself does not use it, but that's what implementing most platform | 
|  | * drivers, should try reuse for consistency. | 
|  | */ | 
|  |  | 
|  | struct power_supply_info { | 
|  | const char *name; | 
|  | int technology; | 
|  | int voltage_max_design; | 
|  | int voltage_min_design; | 
|  | int charge_full_design; | 
|  | int charge_empty_design; | 
|  | int energy_full_design; | 
|  | int energy_empty_design; | 
|  | int use_for_apm; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * This is the recommended struct to manage static battery parameters, | 
|  | * populated by power_supply_get_battery_info(). Most platform drivers should | 
|  | * use these for consistency. | 
|  | * Its field names must correspond to elements in enum power_supply_property. | 
|  | * The default field value is -EINVAL. | 
|  | * Power supply class itself doesn't use this. | 
|  | */ | 
|  |  | 
|  | struct power_supply_battery_info { | 
|  | int energy_full_design_uwh;	    /* microWatt-hours */ | 
|  | int charge_full_design_uah;	    /* microAmp-hours */ | 
|  | int voltage_min_design_uv;	    /* microVolts */ | 
|  | int precharge_current_ua;	    /* microAmps */ | 
|  | int charge_term_current_ua;	    /* microAmps */ | 
|  | int constant_charge_current_max_ua; /* microAmps */ | 
|  | int constant_charge_voltage_max_uv; /* microVolts */ | 
|  | }; | 
|  |  | 
|  | extern struct atomic_notifier_head power_supply_notifier; | 
|  | extern int power_supply_reg_notifier(struct notifier_block *nb); | 
|  | extern void power_supply_unreg_notifier(struct notifier_block *nb); | 
|  | extern struct power_supply *power_supply_get_by_name(const char *name); | 
|  | extern void power_supply_put(struct power_supply *psy); | 
|  | #ifdef CONFIG_OF | 
|  | extern struct power_supply *power_supply_get_by_phandle(struct device_node *np, | 
|  | const char *property); | 
|  | extern struct power_supply *devm_power_supply_get_by_phandle( | 
|  | struct device *dev, const char *property); | 
|  | #else /* !CONFIG_OF */ | 
|  | static inline struct power_supply * | 
|  | power_supply_get_by_phandle(struct device_node *np, const char *property) | 
|  | { return NULL; } | 
|  | static inline struct power_supply * | 
|  | devm_power_supply_get_by_phandle(struct device *dev, const char *property) | 
|  | { return NULL; } | 
|  | #endif /* CONFIG_OF */ | 
|  |  | 
|  | extern int power_supply_get_battery_info(struct power_supply *psy, | 
|  | struct power_supply_battery_info *info); | 
|  | extern void power_supply_changed(struct power_supply *psy); | 
|  | extern int power_supply_am_i_supplied(struct power_supply *psy); | 
|  | extern int power_supply_set_input_current_limit_from_supplier( | 
|  | struct power_supply *psy); | 
|  | extern int power_supply_set_battery_charged(struct power_supply *psy); | 
|  |  | 
|  | #ifdef CONFIG_POWER_SUPPLY | 
|  | extern int power_supply_is_system_supplied(void); | 
|  | #else | 
|  | static inline int power_supply_is_system_supplied(void) { return -ENOSYS; } | 
|  | #endif | 
|  |  | 
|  | extern int power_supply_get_property(struct power_supply *psy, | 
|  | enum power_supply_property psp, | 
|  | union power_supply_propval *val); | 
|  | extern int power_supply_set_property(struct power_supply *psy, | 
|  | enum power_supply_property psp, | 
|  | const union power_supply_propval *val); | 
|  | extern int power_supply_property_is_writeable(struct power_supply *psy, | 
|  | enum power_supply_property psp); | 
|  | extern void power_supply_external_power_changed(struct power_supply *psy); | 
|  |  | 
|  | extern struct power_supply *__must_check | 
|  | power_supply_register(struct device *parent, | 
|  | const struct power_supply_desc *desc, | 
|  | const struct power_supply_config *cfg); | 
|  | extern struct power_supply *__must_check | 
|  | power_supply_register_no_ws(struct device *parent, | 
|  | const struct power_supply_desc *desc, | 
|  | const struct power_supply_config *cfg); | 
|  | extern struct power_supply *__must_check | 
|  | devm_power_supply_register(struct device *parent, | 
|  | const struct power_supply_desc *desc, | 
|  | const struct power_supply_config *cfg); | 
|  | extern struct power_supply *__must_check | 
|  | devm_power_supply_register_no_ws(struct device *parent, | 
|  | const struct power_supply_desc *desc, | 
|  | const struct power_supply_config *cfg); | 
|  | extern void power_supply_unregister(struct power_supply *psy); | 
|  | extern int power_supply_powers(struct power_supply *psy, struct device *dev); | 
|  |  | 
|  | extern void *power_supply_get_drvdata(struct power_supply *psy); | 
|  | /* For APM emulation, think legacy userspace. */ | 
|  | extern struct class *power_supply_class; | 
|  |  | 
|  | static inline bool power_supply_is_amp_property(enum power_supply_property psp) | 
|  | { | 
|  | switch (psp) { | 
|  | case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: | 
|  | case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN: | 
|  | case POWER_SUPPLY_PROP_CHARGE_FULL: | 
|  | case POWER_SUPPLY_PROP_CHARGE_EMPTY: | 
|  | case POWER_SUPPLY_PROP_CHARGE_NOW: | 
|  | case POWER_SUPPLY_PROP_CHARGE_AVG: | 
|  | case POWER_SUPPLY_PROP_CHARGE_COUNTER: | 
|  | case POWER_SUPPLY_PROP_PRECHARGE_CURRENT: | 
|  | case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT: | 
|  | case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: | 
|  | case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: | 
|  | case POWER_SUPPLY_PROP_CURRENT_MAX: | 
|  | case POWER_SUPPLY_PROP_CURRENT_NOW: | 
|  | case POWER_SUPPLY_PROP_CURRENT_AVG: | 
|  | case POWER_SUPPLY_PROP_CURRENT_BOOT: | 
|  | return 1; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static inline bool power_supply_is_watt_property(enum power_supply_property psp) | 
|  | { | 
|  | switch (psp) { | 
|  | case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: | 
|  | case POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN: | 
|  | case POWER_SUPPLY_PROP_ENERGY_FULL: | 
|  | case POWER_SUPPLY_PROP_ENERGY_EMPTY: | 
|  | case POWER_SUPPLY_PROP_ENERGY_NOW: | 
|  | case POWER_SUPPLY_PROP_ENERGY_AVG: | 
|  | case POWER_SUPPLY_PROP_VOLTAGE_MAX: | 
|  | case POWER_SUPPLY_PROP_VOLTAGE_MIN: | 
|  | case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: | 
|  | case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: | 
|  | case POWER_SUPPLY_PROP_VOLTAGE_NOW: | 
|  | case POWER_SUPPLY_PROP_VOLTAGE_AVG: | 
|  | case POWER_SUPPLY_PROP_VOLTAGE_OCV: | 
|  | case POWER_SUPPLY_PROP_VOLTAGE_BOOT: | 
|  | case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: | 
|  | case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: | 
|  | case POWER_SUPPLY_PROP_POWER_NOW: | 
|  | return 1; | 
|  | default: | 
|  | break; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #endif /* __LINUX_POWER_SUPPLY_H__ */ |