|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * Copyright (c) 2004 Evgeniy Polyakov <[email protected]> | 
|  | */ | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/timer.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/kthread.h> | 
|  | #include <linux/freezer.h> | 
|  | #include <linux/hwmon.h> | 
|  | #include <linux/of.h> | 
|  |  | 
|  | #include <linux/atomic.h> | 
|  |  | 
|  | #include "w1_internal.h" | 
|  | #include "w1_netlink.h" | 
|  |  | 
|  | #define W1_FAMILY_DEFAULT	0 | 
|  |  | 
|  | static int w1_timeout = 10; | 
|  | module_param_named(timeout, w1_timeout, int, 0); | 
|  | MODULE_PARM_DESC(timeout, "time in seconds between automatic slave searches"); | 
|  |  | 
|  | static int w1_timeout_us = 0; | 
|  | module_param_named(timeout_us, w1_timeout_us, int, 0); | 
|  | MODULE_PARM_DESC(timeout_us, | 
|  | "time in microseconds between automatic slave searches"); | 
|  |  | 
|  | /* A search stops when w1_max_slave_count devices have been found in that | 
|  | * search.  The next search will start over and detect the same set of devices | 
|  | * on a static 1-wire bus.  Memory is not allocated based on this number, just | 
|  | * on the number of devices known to the kernel.  Having a high number does not | 
|  | * consume additional resources.  As a special case, if there is only one | 
|  | * device on the network and w1_max_slave_count is set to 1, the device id can | 
|  | * be read directly skipping the normal slower search process. | 
|  | */ | 
|  | int w1_max_slave_count = 64; | 
|  | module_param_named(max_slave_count, w1_max_slave_count, int, 0); | 
|  | MODULE_PARM_DESC(max_slave_count, | 
|  | "maximum number of slaves detected in a search"); | 
|  |  | 
|  | int w1_max_slave_ttl = 10; | 
|  | module_param_named(slave_ttl, w1_max_slave_ttl, int, 0); | 
|  | MODULE_PARM_DESC(slave_ttl, | 
|  | "Number of searches not seeing a slave before it will be removed"); | 
|  |  | 
|  | DEFINE_MUTEX(w1_mlock); | 
|  | LIST_HEAD(w1_masters); | 
|  |  | 
|  | static int w1_master_match(struct device *dev, struct device_driver *drv) | 
|  | { | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static int w1_master_probe(struct device *dev) | 
|  | { | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | static void w1_master_release(struct device *dev) | 
|  | { | 
|  | struct w1_master *md = dev_to_w1_master(dev); | 
|  |  | 
|  | dev_dbg(dev, "%s: Releasing %s.\n", __func__, md->name); | 
|  | memset(md, 0, sizeof(struct w1_master) + sizeof(struct w1_bus_master)); | 
|  | kfree(md); | 
|  | } | 
|  |  | 
|  | static void w1_slave_release(struct device *dev) | 
|  | { | 
|  | struct w1_slave *sl = dev_to_w1_slave(dev); | 
|  |  | 
|  | dev_dbg(dev, "%s: Releasing %s [%p]\n", __func__, sl->name, sl); | 
|  |  | 
|  | w1_family_put(sl->family); | 
|  | sl->master->slave_count--; | 
|  | } | 
|  |  | 
|  | static ssize_t name_show(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct w1_slave *sl = dev_to_w1_slave(dev); | 
|  |  | 
|  | return sprintf(buf, "%s\n", sl->name); | 
|  | } | 
|  | static DEVICE_ATTR_RO(name); | 
|  |  | 
|  | static ssize_t id_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct w1_slave *sl = dev_to_w1_slave(dev); | 
|  | ssize_t count = sizeof(sl->reg_num); | 
|  |  | 
|  | memcpy(buf, (u8 *)&sl->reg_num, count); | 
|  | return count; | 
|  | } | 
|  | static DEVICE_ATTR_RO(id); | 
|  |  | 
|  | static struct attribute *w1_slave_attrs[] = { | 
|  | &dev_attr_name.attr, | 
|  | &dev_attr_id.attr, | 
|  | NULL, | 
|  | }; | 
|  | ATTRIBUTE_GROUPS(w1_slave); | 
|  |  | 
|  | /* Default family */ | 
|  |  | 
|  | static ssize_t rw_write(struct file *filp, struct kobject *kobj, | 
|  | struct bin_attribute *bin_attr, char *buf, loff_t off, | 
|  | size_t count) | 
|  | { | 
|  | struct w1_slave *sl = kobj_to_w1_slave(kobj); | 
|  |  | 
|  | mutex_lock(&sl->master->mutex); | 
|  | if (w1_reset_select_slave(sl)) { | 
|  | count = 0; | 
|  | goto out_up; | 
|  | } | 
|  |  | 
|  | w1_write_block(sl->master, buf, count); | 
|  |  | 
|  | out_up: | 
|  | mutex_unlock(&sl->master->mutex); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t rw_read(struct file *filp, struct kobject *kobj, | 
|  | struct bin_attribute *bin_attr, char *buf, loff_t off, | 
|  | size_t count) | 
|  | { | 
|  | struct w1_slave *sl = kobj_to_w1_slave(kobj); | 
|  |  | 
|  | mutex_lock(&sl->master->mutex); | 
|  | w1_read_block(sl->master, buf, count); | 
|  | mutex_unlock(&sl->master->mutex); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static BIN_ATTR_RW(rw, PAGE_SIZE); | 
|  |  | 
|  | static struct bin_attribute *w1_slave_bin_attrs[] = { | 
|  | &bin_attr_rw, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group w1_slave_default_group = { | 
|  | .bin_attrs = w1_slave_bin_attrs, | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group *w1_slave_default_groups[] = { | 
|  | &w1_slave_default_group, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static struct w1_family_ops w1_default_fops = { | 
|  | .groups		= w1_slave_default_groups, | 
|  | }; | 
|  |  | 
|  | static struct w1_family w1_default_family = { | 
|  | .fops = &w1_default_fops, | 
|  | }; | 
|  |  | 
|  | static int w1_uevent(struct device *dev, struct kobj_uevent_env *env); | 
|  |  | 
|  | static struct bus_type w1_bus_type = { | 
|  | .name = "w1", | 
|  | .match = w1_master_match, | 
|  | .uevent = w1_uevent, | 
|  | }; | 
|  |  | 
|  | struct device_driver w1_master_driver = { | 
|  | .name = "w1_master_driver", | 
|  | .bus = &w1_bus_type, | 
|  | .probe = w1_master_probe, | 
|  | }; | 
|  |  | 
|  | struct device w1_master_device = { | 
|  | .parent = NULL, | 
|  | .bus = &w1_bus_type, | 
|  | .init_name = "w1 bus master", | 
|  | .driver = &w1_master_driver, | 
|  | .release = &w1_master_release | 
|  | }; | 
|  |  | 
|  | static struct device_driver w1_slave_driver = { | 
|  | .name = "w1_slave_driver", | 
|  | .bus = &w1_bus_type, | 
|  | }; | 
|  |  | 
|  | #if 0 | 
|  | struct device w1_slave_device = { | 
|  | .parent = NULL, | 
|  | .bus = &w1_bus_type, | 
|  | .init_name = "w1 bus slave", | 
|  | .driver = &w1_slave_driver, | 
|  | .release = &w1_slave_release | 
|  | }; | 
|  | #endif  /*  0  */ | 
|  |  | 
|  | static ssize_t w1_master_attribute_show_name(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct w1_master *md = dev_to_w1_master(dev); | 
|  | ssize_t count; | 
|  |  | 
|  | mutex_lock(&md->mutex); | 
|  | count = sprintf(buf, "%s\n", md->name); | 
|  | mutex_unlock(&md->mutex); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t w1_master_attribute_store_search(struct device * dev, | 
|  | struct device_attribute *attr, | 
|  | const char * buf, size_t count) | 
|  | { | 
|  | long tmp; | 
|  | struct w1_master *md = dev_to_w1_master(dev); | 
|  | int ret; | 
|  |  | 
|  | ret = kstrtol(buf, 0, &tmp); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | mutex_lock(&md->mutex); | 
|  | md->search_count = tmp; | 
|  | mutex_unlock(&md->mutex); | 
|  | /* Only wake if it is going to be searching. */ | 
|  | if (tmp) | 
|  | wake_up_process(md->thread); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t w1_master_attribute_show_search(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct w1_master *md = dev_to_w1_master(dev); | 
|  | ssize_t count; | 
|  |  | 
|  | mutex_lock(&md->mutex); | 
|  | count = sprintf(buf, "%d\n", md->search_count); | 
|  | mutex_unlock(&md->mutex); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t w1_master_attribute_store_pullup(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | long tmp; | 
|  | struct w1_master *md = dev_to_w1_master(dev); | 
|  | int ret; | 
|  |  | 
|  | ret = kstrtol(buf, 0, &tmp); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | mutex_lock(&md->mutex); | 
|  | md->enable_pullup = tmp; | 
|  | mutex_unlock(&md->mutex); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t w1_master_attribute_show_pullup(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct w1_master *md = dev_to_w1_master(dev); | 
|  | ssize_t count; | 
|  |  | 
|  | mutex_lock(&md->mutex); | 
|  | count = sprintf(buf, "%d\n", md->enable_pullup); | 
|  | mutex_unlock(&md->mutex); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t w1_master_attribute_show_pointer(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct w1_master *md = dev_to_w1_master(dev); | 
|  | ssize_t count; | 
|  |  | 
|  | mutex_lock(&md->mutex); | 
|  | count = sprintf(buf, "0x%p\n", md->bus_master); | 
|  | mutex_unlock(&md->mutex); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t w1_master_attribute_show_timeout(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | ssize_t count; | 
|  | count = sprintf(buf, "%d\n", w1_timeout); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t w1_master_attribute_show_timeout_us(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | ssize_t count; | 
|  | count = sprintf(buf, "%d\n", w1_timeout_us); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t w1_master_attribute_store_max_slave_count(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, size_t count) | 
|  | { | 
|  | int tmp; | 
|  | struct w1_master *md = dev_to_w1_master(dev); | 
|  |  | 
|  | if (kstrtoint(buf, 0, &tmp) || tmp < 1) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&md->mutex); | 
|  | md->max_slave_count = tmp; | 
|  | /* allow each time the max_slave_count is updated */ | 
|  | clear_bit(W1_WARN_MAX_COUNT, &md->flags); | 
|  | mutex_unlock(&md->mutex); | 
|  |  | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t w1_master_attribute_show_max_slave_count(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct w1_master *md = dev_to_w1_master(dev); | 
|  | ssize_t count; | 
|  |  | 
|  | mutex_lock(&md->mutex); | 
|  | count = sprintf(buf, "%d\n", md->max_slave_count); | 
|  | mutex_unlock(&md->mutex); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t w1_master_attribute_show_attempts(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct w1_master *md = dev_to_w1_master(dev); | 
|  | ssize_t count; | 
|  |  | 
|  | mutex_lock(&md->mutex); | 
|  | count = sprintf(buf, "%lu\n", md->attempts); | 
|  | mutex_unlock(&md->mutex); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t w1_master_attribute_show_slave_count(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct w1_master *md = dev_to_w1_master(dev); | 
|  | ssize_t count; | 
|  |  | 
|  | mutex_lock(&md->mutex); | 
|  | count = sprintf(buf, "%d\n", md->slave_count); | 
|  | mutex_unlock(&md->mutex); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t w1_master_attribute_show_slaves(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct w1_master *md = dev_to_w1_master(dev); | 
|  | int c = PAGE_SIZE; | 
|  | struct list_head *ent, *n; | 
|  | struct w1_slave *sl = NULL; | 
|  |  | 
|  | mutex_lock(&md->list_mutex); | 
|  |  | 
|  | list_for_each_safe(ent, n, &md->slist) { | 
|  | sl = list_entry(ent, struct w1_slave, w1_slave_entry); | 
|  |  | 
|  | c -= snprintf(buf + PAGE_SIZE - c, c, "%s\n", sl->name); | 
|  | } | 
|  | if (!sl) | 
|  | c -= snprintf(buf + PAGE_SIZE - c, c, "not found.\n"); | 
|  |  | 
|  | mutex_unlock(&md->list_mutex); | 
|  |  | 
|  | return PAGE_SIZE - c; | 
|  | } | 
|  |  | 
|  | static ssize_t w1_master_attribute_show_add(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | int c = PAGE_SIZE; | 
|  | c -= snprintf(buf+PAGE_SIZE - c, c, | 
|  | "write device id xx-xxxxxxxxxxxx to add slave\n"); | 
|  | return PAGE_SIZE - c; | 
|  | } | 
|  |  | 
|  | static int w1_atoreg_num(struct device *dev, const char *buf, size_t count, | 
|  | struct w1_reg_num *rn) | 
|  | { | 
|  | unsigned int family; | 
|  | unsigned long long id; | 
|  | int i; | 
|  | u64 rn64_le; | 
|  |  | 
|  | /* The CRC value isn't read from the user because the sysfs directory | 
|  | * doesn't include it and most messages from the bus search don't | 
|  | * print it either.  It would be unreasonable for the user to then | 
|  | * provide it. | 
|  | */ | 
|  | const char *error_msg = "bad slave string format, expecting " | 
|  | "ff-dddddddddddd\n"; | 
|  |  | 
|  | if (buf[2] != '-') { | 
|  | dev_err(dev, "%s", error_msg); | 
|  | return -EINVAL; | 
|  | } | 
|  | i = sscanf(buf, "%02x-%012llx", &family, &id); | 
|  | if (i != 2) { | 
|  | dev_err(dev, "%s", error_msg); | 
|  | return -EINVAL; | 
|  | } | 
|  | rn->family = family; | 
|  | rn->id = id; | 
|  |  | 
|  | rn64_le = cpu_to_le64(*(u64 *)rn); | 
|  | rn->crc = w1_calc_crc8((u8 *)&rn64_le, 7); | 
|  |  | 
|  | #if 0 | 
|  | dev_info(dev, "With CRC device is %02x.%012llx.%02x.\n", | 
|  | rn->family, (unsigned long long)rn->id, rn->crc); | 
|  | #endif | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Searches the slaves in the w1_master and returns a pointer or NULL. | 
|  | * Note: must not hold list_mutex | 
|  | */ | 
|  | struct w1_slave *w1_slave_search_device(struct w1_master *dev, | 
|  | struct w1_reg_num *rn) | 
|  | { | 
|  | struct w1_slave *sl; | 
|  | mutex_lock(&dev->list_mutex); | 
|  | list_for_each_entry(sl, &dev->slist, w1_slave_entry) { | 
|  | if (sl->reg_num.family == rn->family && | 
|  | sl->reg_num.id == rn->id && | 
|  | sl->reg_num.crc == rn->crc) { | 
|  | mutex_unlock(&dev->list_mutex); | 
|  | return sl; | 
|  | } | 
|  | } | 
|  | mutex_unlock(&dev->list_mutex); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static ssize_t w1_master_attribute_store_add(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct w1_master *md = dev_to_w1_master(dev); | 
|  | struct w1_reg_num rn; | 
|  | struct w1_slave *sl; | 
|  | ssize_t result = count; | 
|  |  | 
|  | if (w1_atoreg_num(dev, buf, count, &rn)) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&md->mutex); | 
|  | sl = w1_slave_search_device(md, &rn); | 
|  | /* It would be nice to do a targeted search one the one-wire bus | 
|  | * for the new device to see if it is out there or not.  But the | 
|  | * current search doesn't support that. | 
|  | */ | 
|  | if (sl) { | 
|  | dev_info(dev, "Device %s already exists\n", sl->name); | 
|  | result = -EINVAL; | 
|  | } else { | 
|  | w1_attach_slave_device(md, &rn); | 
|  | } | 
|  | mutex_unlock(&md->mutex); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static ssize_t w1_master_attribute_show_remove(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | int c = PAGE_SIZE; | 
|  | c -= snprintf(buf+PAGE_SIZE - c, c, | 
|  | "write device id xx-xxxxxxxxxxxx to remove slave\n"); | 
|  | return PAGE_SIZE - c; | 
|  | } | 
|  |  | 
|  | static ssize_t w1_master_attribute_store_remove(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct w1_master *md = dev_to_w1_master(dev); | 
|  | struct w1_reg_num rn; | 
|  | struct w1_slave *sl; | 
|  | ssize_t result = count; | 
|  |  | 
|  | if (w1_atoreg_num(dev, buf, count, &rn)) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&md->mutex); | 
|  | sl = w1_slave_search_device(md, &rn); | 
|  | if (sl) { | 
|  | result = w1_slave_detach(sl); | 
|  | /* refcnt 0 means it was detached in the call */ | 
|  | if (result == 0) | 
|  | result = count; | 
|  | } else { | 
|  | dev_info(dev, "Device %02x-%012llx doesn't exists\n", rn.family, | 
|  | (unsigned long long)rn.id); | 
|  | result = -EINVAL; | 
|  | } | 
|  | mutex_unlock(&md->mutex); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | #define W1_MASTER_ATTR_RO(_name, _mode)				\ | 
|  | struct device_attribute w1_master_attribute_##_name =	\ | 
|  | __ATTR(w1_master_##_name, _mode,		\ | 
|  | w1_master_attribute_show_##_name, NULL) | 
|  |  | 
|  | #define W1_MASTER_ATTR_RW(_name, _mode)				\ | 
|  | struct device_attribute w1_master_attribute_##_name =	\ | 
|  | __ATTR(w1_master_##_name, _mode,		\ | 
|  | w1_master_attribute_show_##_name,	\ | 
|  | w1_master_attribute_store_##_name) | 
|  |  | 
|  | static W1_MASTER_ATTR_RO(name, S_IRUGO); | 
|  | static W1_MASTER_ATTR_RO(slaves, S_IRUGO); | 
|  | static W1_MASTER_ATTR_RO(slave_count, S_IRUGO); | 
|  | static W1_MASTER_ATTR_RW(max_slave_count, S_IRUGO | S_IWUSR | S_IWGRP); | 
|  | static W1_MASTER_ATTR_RO(attempts, S_IRUGO); | 
|  | static W1_MASTER_ATTR_RO(timeout, S_IRUGO); | 
|  | static W1_MASTER_ATTR_RO(timeout_us, S_IRUGO); | 
|  | static W1_MASTER_ATTR_RO(pointer, S_IRUGO); | 
|  | static W1_MASTER_ATTR_RW(search, S_IRUGO | S_IWUSR | S_IWGRP); | 
|  | static W1_MASTER_ATTR_RW(pullup, S_IRUGO | S_IWUSR | S_IWGRP); | 
|  | static W1_MASTER_ATTR_RW(add, S_IRUGO | S_IWUSR | S_IWGRP); | 
|  | static W1_MASTER_ATTR_RW(remove, S_IRUGO | S_IWUSR | S_IWGRP); | 
|  |  | 
|  | static struct attribute *w1_master_default_attrs[] = { | 
|  | &w1_master_attribute_name.attr, | 
|  | &w1_master_attribute_slaves.attr, | 
|  | &w1_master_attribute_slave_count.attr, | 
|  | &w1_master_attribute_max_slave_count.attr, | 
|  | &w1_master_attribute_attempts.attr, | 
|  | &w1_master_attribute_timeout.attr, | 
|  | &w1_master_attribute_timeout_us.attr, | 
|  | &w1_master_attribute_pointer.attr, | 
|  | &w1_master_attribute_search.attr, | 
|  | &w1_master_attribute_pullup.attr, | 
|  | &w1_master_attribute_add.attr, | 
|  | &w1_master_attribute_remove.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group w1_master_defattr_group = { | 
|  | .attrs = w1_master_default_attrs, | 
|  | }; | 
|  |  | 
|  | int w1_create_master_attributes(struct w1_master *master) | 
|  | { | 
|  | return sysfs_create_group(&master->dev.kobj, &w1_master_defattr_group); | 
|  | } | 
|  |  | 
|  | void w1_destroy_master_attributes(struct w1_master *master) | 
|  | { | 
|  | sysfs_remove_group(&master->dev.kobj, &w1_master_defattr_group); | 
|  | } | 
|  |  | 
|  | static int w1_uevent(struct device *dev, struct kobj_uevent_env *env) | 
|  | { | 
|  | struct w1_master *md = NULL; | 
|  | struct w1_slave *sl = NULL; | 
|  | char *event_owner, *name; | 
|  | int err = 0; | 
|  |  | 
|  | if (dev->driver == &w1_master_driver) { | 
|  | md = container_of(dev, struct w1_master, dev); | 
|  | event_owner = "master"; | 
|  | name = md->name; | 
|  | } else if (dev->driver == &w1_slave_driver) { | 
|  | sl = container_of(dev, struct w1_slave, dev); | 
|  | event_owner = "slave"; | 
|  | name = sl->name; | 
|  | } else { | 
|  | dev_dbg(dev, "Unknown event.\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "Hotplug event for %s %s, bus_id=%s.\n", | 
|  | event_owner, name, dev_name(dev)); | 
|  |  | 
|  | if (dev->driver != &w1_slave_driver || !sl) | 
|  | goto end; | 
|  |  | 
|  | err = add_uevent_var(env, "W1_FID=%02X", sl->reg_num.family); | 
|  | if (err) | 
|  | goto end; | 
|  |  | 
|  | err = add_uevent_var(env, "W1_SLAVE_ID=%024LX", | 
|  | (unsigned long long)sl->reg_num.id); | 
|  | end: | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int w1_family_notify(unsigned long action, struct w1_slave *sl) | 
|  | { | 
|  | struct w1_family_ops *fops; | 
|  | int err; | 
|  |  | 
|  | fops = sl->family->fops; | 
|  |  | 
|  | if (!fops) | 
|  | return 0; | 
|  |  | 
|  | switch (action) { | 
|  | case BUS_NOTIFY_ADD_DEVICE: | 
|  | /* if the family driver needs to initialize something... */ | 
|  | if (fops->add_slave) { | 
|  | err = fops->add_slave(sl); | 
|  | if (err < 0) { | 
|  | dev_err(&sl->dev, | 
|  | "add_slave() call failed. err=%d\n", | 
|  | err); | 
|  | return err; | 
|  | } | 
|  | } | 
|  | if (fops->groups) { | 
|  | err = sysfs_create_groups(&sl->dev.kobj, fops->groups); | 
|  | if (err) { | 
|  | dev_err(&sl->dev, | 
|  | "sysfs group creation failed. err=%d\n", | 
|  | err); | 
|  | return err; | 
|  | } | 
|  | } | 
|  | if (IS_REACHABLE(CONFIG_HWMON) && fops->chip_info) { | 
|  | struct device *hwmon | 
|  | = hwmon_device_register_with_info(&sl->dev, | 
|  | "w1_slave_temp", sl, | 
|  | fops->chip_info, | 
|  | NULL); | 
|  | if (IS_ERR(hwmon)) { | 
|  | dev_warn(&sl->dev, | 
|  | "could not create hwmon device\n"); | 
|  | } else { | 
|  | sl->hwmon = hwmon; | 
|  | } | 
|  | } | 
|  | break; | 
|  | case BUS_NOTIFY_DEL_DEVICE: | 
|  | if (IS_REACHABLE(CONFIG_HWMON) && fops->chip_info && | 
|  | sl->hwmon) | 
|  | hwmon_device_unregister(sl->hwmon); | 
|  | if (fops->remove_slave) | 
|  | sl->family->fops->remove_slave(sl); | 
|  | if (fops->groups) | 
|  | sysfs_remove_groups(&sl->dev.kobj, fops->groups); | 
|  | break; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __w1_attach_slave_device(struct w1_slave *sl) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | sl->dev.parent = &sl->master->dev; | 
|  | sl->dev.driver = &w1_slave_driver; | 
|  | sl->dev.bus = &w1_bus_type; | 
|  | sl->dev.release = &w1_slave_release; | 
|  | sl->dev.groups = w1_slave_groups; | 
|  | sl->dev.of_node = of_find_matching_node(sl->master->dev.of_node, | 
|  | sl->family->of_match_table); | 
|  |  | 
|  | dev_set_name(&sl->dev, "%02x-%012llx", | 
|  | (unsigned int) sl->reg_num.family, | 
|  | (unsigned long long) sl->reg_num.id); | 
|  | snprintf(&sl->name[0], sizeof(sl->name), | 
|  | "%02x-%012llx", | 
|  | (unsigned int) sl->reg_num.family, | 
|  | (unsigned long long) sl->reg_num.id); | 
|  |  | 
|  | dev_dbg(&sl->dev, "%s: registering %s as %p.\n", __func__, | 
|  | dev_name(&sl->dev), sl); | 
|  |  | 
|  | /* suppress for w1_family_notify before sending KOBJ_ADD */ | 
|  | dev_set_uevent_suppress(&sl->dev, true); | 
|  |  | 
|  | err = device_register(&sl->dev); | 
|  | if (err < 0) { | 
|  | dev_err(&sl->dev, | 
|  | "Device registration [%s] failed. err=%d\n", | 
|  | dev_name(&sl->dev), err); | 
|  | put_device(&sl->dev); | 
|  | return err; | 
|  | } | 
|  | w1_family_notify(BUS_NOTIFY_ADD_DEVICE, sl); | 
|  |  | 
|  | dev_set_uevent_suppress(&sl->dev, false); | 
|  | kobject_uevent(&sl->dev.kobj, KOBJ_ADD); | 
|  |  | 
|  | mutex_lock(&sl->master->list_mutex); | 
|  | list_add_tail(&sl->w1_slave_entry, &sl->master->slist); | 
|  | mutex_unlock(&sl->master->list_mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int w1_attach_slave_device(struct w1_master *dev, struct w1_reg_num *rn) | 
|  | { | 
|  | struct w1_slave *sl; | 
|  | struct w1_family *f; | 
|  | int err; | 
|  | struct w1_netlink_msg msg; | 
|  |  | 
|  | sl = kzalloc(sizeof(struct w1_slave), GFP_KERNEL); | 
|  | if (!sl) { | 
|  | dev_err(&dev->dev, | 
|  | "%s: failed to allocate new slave device.\n", | 
|  | __func__); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  |  | 
|  | sl->owner = THIS_MODULE; | 
|  | sl->master = dev; | 
|  | set_bit(W1_SLAVE_ACTIVE, &sl->flags); | 
|  |  | 
|  | memset(&msg, 0, sizeof(msg)); | 
|  | memcpy(&sl->reg_num, rn, sizeof(sl->reg_num)); | 
|  | atomic_set(&sl->refcnt, 1); | 
|  | atomic_inc(&sl->master->refcnt); | 
|  | dev->slave_count++; | 
|  | dev_info(&dev->dev, "Attaching one wire slave %02x.%012llx crc %02x\n", | 
|  | rn->family, (unsigned long long)rn->id, rn->crc); | 
|  |  | 
|  | /* slave modules need to be loaded in a context with unlocked mutex */ | 
|  | mutex_unlock(&dev->mutex); | 
|  | request_module("w1-family-0x%02X", rn->family); | 
|  | mutex_lock(&dev->mutex); | 
|  |  | 
|  | spin_lock(&w1_flock); | 
|  | f = w1_family_registered(rn->family); | 
|  | if (!f) { | 
|  | f= &w1_default_family; | 
|  | dev_info(&dev->dev, "Family %x for %02x.%012llx.%02x is not registered.\n", | 
|  | rn->family, rn->family, | 
|  | (unsigned long long)rn->id, rn->crc); | 
|  | } | 
|  | __w1_family_get(f); | 
|  | spin_unlock(&w1_flock); | 
|  |  | 
|  | sl->family = f; | 
|  |  | 
|  | err = __w1_attach_slave_device(sl); | 
|  | if (err < 0) { | 
|  | dev_err(&dev->dev, "%s: Attaching %s failed.\n", __func__, | 
|  | sl->name); | 
|  | dev->slave_count--; | 
|  | w1_family_put(sl->family); | 
|  | atomic_dec(&sl->master->refcnt); | 
|  | kfree(sl); | 
|  | return err; | 
|  | } | 
|  |  | 
|  | sl->ttl = dev->slave_ttl; | 
|  |  | 
|  | memcpy(msg.id.id, rn, sizeof(msg.id)); | 
|  | msg.type = W1_SLAVE_ADD; | 
|  | w1_netlink_send(dev, &msg); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int w1_unref_slave(struct w1_slave *sl) | 
|  | { | 
|  | struct w1_master *dev = sl->master; | 
|  | int refcnt; | 
|  | mutex_lock(&dev->list_mutex); | 
|  | refcnt = atomic_sub_return(1, &sl->refcnt); | 
|  | if (refcnt == 0) { | 
|  | struct w1_netlink_msg msg; | 
|  |  | 
|  | dev_dbg(&sl->dev, "%s: detaching %s [%p].\n", __func__, | 
|  | sl->name, sl); | 
|  |  | 
|  | list_del(&sl->w1_slave_entry); | 
|  |  | 
|  | memset(&msg, 0, sizeof(msg)); | 
|  | memcpy(msg.id.id, &sl->reg_num, sizeof(msg.id)); | 
|  | msg.type = W1_SLAVE_REMOVE; | 
|  | w1_netlink_send(sl->master, &msg); | 
|  |  | 
|  | w1_family_notify(BUS_NOTIFY_DEL_DEVICE, sl); | 
|  | device_unregister(&sl->dev); | 
|  | #ifdef DEBUG | 
|  | memset(sl, 0, sizeof(*sl)); | 
|  | #endif | 
|  | kfree(sl); | 
|  | } | 
|  | atomic_dec(&dev->refcnt); | 
|  | mutex_unlock(&dev->list_mutex); | 
|  | return refcnt; | 
|  | } | 
|  |  | 
|  | int w1_slave_detach(struct w1_slave *sl) | 
|  | { | 
|  | /* Only detach a slave once as it decreases the refcnt each time. */ | 
|  | int destroy_now; | 
|  | mutex_lock(&sl->master->list_mutex); | 
|  | destroy_now = !test_bit(W1_SLAVE_DETACH, &sl->flags); | 
|  | set_bit(W1_SLAVE_DETACH, &sl->flags); | 
|  | mutex_unlock(&sl->master->list_mutex); | 
|  |  | 
|  | if (destroy_now) | 
|  | destroy_now = !w1_unref_slave(sl); | 
|  | return destroy_now ? 0 : -EBUSY; | 
|  | } | 
|  |  | 
|  | struct w1_master *w1_search_master_id(u32 id) | 
|  | { | 
|  | struct w1_master *dev; | 
|  | int found = 0; | 
|  |  | 
|  | mutex_lock(&w1_mlock); | 
|  | list_for_each_entry(dev, &w1_masters, w1_master_entry) { | 
|  | if (dev->id == id) { | 
|  | found = 1; | 
|  | atomic_inc(&dev->refcnt); | 
|  | break; | 
|  | } | 
|  | } | 
|  | mutex_unlock(&w1_mlock); | 
|  |  | 
|  | return (found)?dev:NULL; | 
|  | } | 
|  |  | 
|  | struct w1_slave *w1_search_slave(struct w1_reg_num *id) | 
|  | { | 
|  | struct w1_master *dev; | 
|  | struct w1_slave *sl = NULL; | 
|  | int found = 0; | 
|  |  | 
|  | mutex_lock(&w1_mlock); | 
|  | list_for_each_entry(dev, &w1_masters, w1_master_entry) { | 
|  | mutex_lock(&dev->list_mutex); | 
|  | list_for_each_entry(sl, &dev->slist, w1_slave_entry) { | 
|  | if (sl->reg_num.family == id->family && | 
|  | sl->reg_num.id == id->id && | 
|  | sl->reg_num.crc == id->crc) { | 
|  | found = 1; | 
|  | atomic_inc(&dev->refcnt); | 
|  | atomic_inc(&sl->refcnt); | 
|  | break; | 
|  | } | 
|  | } | 
|  | mutex_unlock(&dev->list_mutex); | 
|  |  | 
|  | if (found) | 
|  | break; | 
|  | } | 
|  | mutex_unlock(&w1_mlock); | 
|  |  | 
|  | return (found)?sl:NULL; | 
|  | } | 
|  |  | 
|  | void w1_reconnect_slaves(struct w1_family *f, int attach) | 
|  | { | 
|  | struct w1_slave *sl, *sln; | 
|  | struct w1_master *dev; | 
|  |  | 
|  | mutex_lock(&w1_mlock); | 
|  | list_for_each_entry(dev, &w1_masters, w1_master_entry) { | 
|  | dev_dbg(&dev->dev, "Reconnecting slaves in device %s " | 
|  | "for family %02x.\n", dev->name, f->fid); | 
|  | mutex_lock(&dev->mutex); | 
|  | mutex_lock(&dev->list_mutex); | 
|  | list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) { | 
|  | /* If it is a new family, slaves with the default | 
|  | * family driver and are that family will be | 
|  | * connected.  If the family is going away, devices | 
|  | * matching that family are reconneced. | 
|  | */ | 
|  | if ((attach && sl->family->fid == W1_FAMILY_DEFAULT | 
|  | && sl->reg_num.family == f->fid) || | 
|  | (!attach && sl->family->fid == f->fid)) { | 
|  | struct w1_reg_num rn; | 
|  |  | 
|  | mutex_unlock(&dev->list_mutex); | 
|  | memcpy(&rn, &sl->reg_num, sizeof(rn)); | 
|  | /* If it was already in use let the automatic | 
|  | * scan pick it up again later. | 
|  | */ | 
|  | if (!w1_slave_detach(sl)) | 
|  | w1_attach_slave_device(dev, &rn); | 
|  | mutex_lock(&dev->list_mutex); | 
|  | } | 
|  | } | 
|  | dev_dbg(&dev->dev, "Reconnecting slaves in device %s " | 
|  | "has been finished.\n", dev->name); | 
|  | mutex_unlock(&dev->list_mutex); | 
|  | mutex_unlock(&dev->mutex); | 
|  | } | 
|  | mutex_unlock(&w1_mlock); | 
|  | } | 
|  |  | 
|  | void w1_slave_found(struct w1_master *dev, u64 rn) | 
|  | { | 
|  | struct w1_slave *sl; | 
|  | struct w1_reg_num *tmp; | 
|  | u64 rn_le = cpu_to_le64(rn); | 
|  |  | 
|  | atomic_inc(&dev->refcnt); | 
|  |  | 
|  | tmp = (struct w1_reg_num *) &rn; | 
|  |  | 
|  | sl = w1_slave_search_device(dev, tmp); | 
|  | if (sl) { | 
|  | set_bit(W1_SLAVE_ACTIVE, &sl->flags); | 
|  | } else { | 
|  | if (rn && tmp->crc == w1_calc_crc8((u8 *)&rn_le, 7)) | 
|  | w1_attach_slave_device(dev, tmp); | 
|  | } | 
|  |  | 
|  | atomic_dec(&dev->refcnt); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * w1_search() - Performs a ROM Search & registers any devices found. | 
|  | * @dev: The master device to search | 
|  | * @search_type: W1_SEARCH to search all devices, or W1_ALARM_SEARCH | 
|  | * to return only devices in the alarmed state | 
|  | * @cb: Function to call when a device is found | 
|  | * | 
|  | * The 1-wire search is a simple binary tree search. | 
|  | * For each bit of the address, we read two bits and write one bit. | 
|  | * The bit written will put to sleep all devies that don't match that bit. | 
|  | * When the two reads differ, the direction choice is obvious. | 
|  | * When both bits are 0, we must choose a path to take. | 
|  | * When we can scan all 64 bits without having to choose a path, we are done. | 
|  | * | 
|  | * See "Application note 187 1-wire search algorithm" at www.maxim-ic.com | 
|  | * | 
|  | */ | 
|  | void w1_search(struct w1_master *dev, u8 search_type, w1_slave_found_callback cb) | 
|  | { | 
|  | u64 last_rn, rn, tmp64; | 
|  | int i, slave_count = 0; | 
|  | int last_zero, last_device; | 
|  | int search_bit, desc_bit; | 
|  | u8  triplet_ret = 0; | 
|  |  | 
|  | search_bit = 0; | 
|  | rn = dev->search_id; | 
|  | last_rn = 0; | 
|  | last_device = 0; | 
|  | last_zero = -1; | 
|  |  | 
|  | desc_bit = 64; | 
|  |  | 
|  | while ( !last_device && (slave_count++ < dev->max_slave_count) ) { | 
|  | last_rn = rn; | 
|  | rn = 0; | 
|  |  | 
|  | /* | 
|  | * Reset bus and all 1-wire device state machines | 
|  | * so they can respond to our requests. | 
|  | * | 
|  | * Return 0 - device(s) present, 1 - no devices present. | 
|  | */ | 
|  | mutex_lock(&dev->bus_mutex); | 
|  | if (w1_reset_bus(dev)) { | 
|  | mutex_unlock(&dev->bus_mutex); | 
|  | dev_dbg(&dev->dev, "No devices present on the wire.\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Do fast search on single slave bus */ | 
|  | if (dev->max_slave_count == 1) { | 
|  | int rv; | 
|  | w1_write_8(dev, W1_READ_ROM); | 
|  | rv = w1_read_block(dev, (u8 *)&rn, 8); | 
|  | mutex_unlock(&dev->bus_mutex); | 
|  |  | 
|  | if (rv == 8 && rn) | 
|  | cb(dev, rn); | 
|  |  | 
|  | break; | 
|  | } | 
|  |  | 
|  | /* Start the search */ | 
|  | w1_write_8(dev, search_type); | 
|  | for (i = 0; i < 64; ++i) { | 
|  | /* Determine the direction/search bit */ | 
|  | if (i == desc_bit) | 
|  | search_bit = 1;	  /* took the 0 path last time, so take the 1 path */ | 
|  | else if (i > desc_bit) | 
|  | search_bit = 0;	  /* take the 0 path on the next branch */ | 
|  | else | 
|  | search_bit = ((last_rn >> i) & 0x1); | 
|  |  | 
|  | /* Read two bits and write one bit */ | 
|  | triplet_ret = w1_triplet(dev, search_bit); | 
|  |  | 
|  | /* quit if no device responded */ | 
|  | if ( (triplet_ret & 0x03) == 0x03 ) | 
|  | break; | 
|  |  | 
|  | /* If both directions were valid, and we took the 0 path... */ | 
|  | if (triplet_ret == 0) | 
|  | last_zero = i; | 
|  |  | 
|  | /* extract the direction taken & update the device number */ | 
|  | tmp64 = (triplet_ret >> 2); | 
|  | rn |= (tmp64 << i); | 
|  |  | 
|  | if (test_bit(W1_ABORT_SEARCH, &dev->flags)) { | 
|  | mutex_unlock(&dev->bus_mutex); | 
|  | dev_dbg(&dev->dev, "Abort w1_search\n"); | 
|  | return; | 
|  | } | 
|  | } | 
|  | mutex_unlock(&dev->bus_mutex); | 
|  |  | 
|  | if ( (triplet_ret & 0x03) != 0x03 ) { | 
|  | if ((desc_bit == last_zero) || (last_zero < 0)) { | 
|  | last_device = 1; | 
|  | dev->search_id = 0; | 
|  | } else { | 
|  | dev->search_id = rn; | 
|  | } | 
|  | desc_bit = last_zero; | 
|  | cb(dev, rn); | 
|  | } | 
|  |  | 
|  | if (!last_device && slave_count == dev->max_slave_count && | 
|  | !test_bit(W1_WARN_MAX_COUNT, &dev->flags)) { | 
|  | /* Only max_slave_count will be scanned in a search, | 
|  | * but it will start where it left off next search | 
|  | * until all ids are identified and then it will start | 
|  | * over.  A continued search will report the previous | 
|  | * last id as the first id (provided it is still on the | 
|  | * bus). | 
|  | */ | 
|  | dev_info(&dev->dev, "%s: max_slave_count %d reached, " | 
|  | "will continue next search.\n", __func__, | 
|  | dev->max_slave_count); | 
|  | set_bit(W1_WARN_MAX_COUNT, &dev->flags); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | void w1_search_process_cb(struct w1_master *dev, u8 search_type, | 
|  | w1_slave_found_callback cb) | 
|  | { | 
|  | struct w1_slave *sl, *sln; | 
|  |  | 
|  | mutex_lock(&dev->list_mutex); | 
|  | list_for_each_entry(sl, &dev->slist, w1_slave_entry) | 
|  | clear_bit(W1_SLAVE_ACTIVE, &sl->flags); | 
|  | mutex_unlock(&dev->list_mutex); | 
|  |  | 
|  | w1_search_devices(dev, search_type, cb); | 
|  |  | 
|  | mutex_lock(&dev->list_mutex); | 
|  | list_for_each_entry_safe(sl, sln, &dev->slist, w1_slave_entry) { | 
|  | if (!test_bit(W1_SLAVE_ACTIVE, &sl->flags) && !--sl->ttl) { | 
|  | mutex_unlock(&dev->list_mutex); | 
|  | w1_slave_detach(sl); | 
|  | mutex_lock(&dev->list_mutex); | 
|  | } | 
|  | else if (test_bit(W1_SLAVE_ACTIVE, &sl->flags)) | 
|  | sl->ttl = dev->slave_ttl; | 
|  | } | 
|  | mutex_unlock(&dev->list_mutex); | 
|  |  | 
|  | if (dev->search_count > 0) | 
|  | dev->search_count--; | 
|  | } | 
|  |  | 
|  | static void w1_search_process(struct w1_master *dev, u8 search_type) | 
|  | { | 
|  | w1_search_process_cb(dev, search_type, w1_slave_found); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * w1_process_callbacks() - execute each dev->async_list callback entry | 
|  | * @dev: w1_master device | 
|  | * | 
|  | * The w1 master list_mutex must be held. | 
|  | * | 
|  | * Return: 1 if there were commands to executed 0 otherwise | 
|  | */ | 
|  | int w1_process_callbacks(struct w1_master *dev) | 
|  | { | 
|  | int ret = 0; | 
|  | struct w1_async_cmd *async_cmd, *async_n; | 
|  |  | 
|  | /* The list can be added to in another thread, loop until it is empty */ | 
|  | while (!list_empty(&dev->async_list)) { | 
|  | list_for_each_entry_safe(async_cmd, async_n, &dev->async_list, | 
|  | async_entry) { | 
|  | /* drop the lock, if it is a search it can take a long | 
|  | * time */ | 
|  | mutex_unlock(&dev->list_mutex); | 
|  | async_cmd->cb(dev, async_cmd); | 
|  | ret = 1; | 
|  | mutex_lock(&dev->list_mutex); | 
|  | } | 
|  | } | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int w1_process(void *data) | 
|  | { | 
|  | struct w1_master *dev = (struct w1_master *) data; | 
|  | /* As long as w1_timeout is only set by a module parameter the sleep | 
|  | * time can be calculated in jiffies once. | 
|  | */ | 
|  | const unsigned long jtime = | 
|  | usecs_to_jiffies(w1_timeout * 1000000 + w1_timeout_us); | 
|  | /* remainder if it woke up early */ | 
|  | unsigned long jremain = 0; | 
|  |  | 
|  | for (;;) { | 
|  |  | 
|  | if (!jremain && dev->search_count) { | 
|  | mutex_lock(&dev->mutex); | 
|  | w1_search_process(dev, W1_SEARCH); | 
|  | mutex_unlock(&dev->mutex); | 
|  | } | 
|  |  | 
|  | mutex_lock(&dev->list_mutex); | 
|  | /* Note, w1_process_callback drops the lock while processing, | 
|  | * but locks it again before returning. | 
|  | */ | 
|  | if (!w1_process_callbacks(dev) && jremain) { | 
|  | /* a wake up is either to stop the thread, process | 
|  | * callbacks, or search, it isn't process callbacks, so | 
|  | * schedule a search. | 
|  | */ | 
|  | jremain = 1; | 
|  | } | 
|  |  | 
|  | __set_current_state(TASK_INTERRUPTIBLE); | 
|  |  | 
|  | /* hold list_mutex until after interruptible to prevent loosing | 
|  | * the wakeup signal when async_cmd is added. | 
|  | */ | 
|  | mutex_unlock(&dev->list_mutex); | 
|  |  | 
|  | if (kthread_should_stop()) | 
|  | break; | 
|  |  | 
|  | /* Only sleep when the search is active. */ | 
|  | if (dev->search_count) { | 
|  | if (!jremain) | 
|  | jremain = jtime; | 
|  | jremain = schedule_timeout(jremain); | 
|  | } | 
|  | else | 
|  | schedule(); | 
|  | } | 
|  |  | 
|  | atomic_dec(&dev->refcnt); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __init w1_init(void) | 
|  | { | 
|  | int retval; | 
|  |  | 
|  | pr_info("Driver for 1-wire Dallas network protocol.\n"); | 
|  |  | 
|  | w1_init_netlink(); | 
|  |  | 
|  | retval = bus_register(&w1_bus_type); | 
|  | if (retval) { | 
|  | pr_err("Failed to register bus. err=%d.\n", retval); | 
|  | goto err_out_exit_init; | 
|  | } | 
|  |  | 
|  | retval = driver_register(&w1_master_driver); | 
|  | if (retval) { | 
|  | pr_err("Failed to register master driver. err=%d.\n", | 
|  | retval); | 
|  | goto err_out_bus_unregister; | 
|  | } | 
|  |  | 
|  | retval = driver_register(&w1_slave_driver); | 
|  | if (retval) { | 
|  | pr_err("Failed to register slave driver. err=%d.\n", | 
|  | retval); | 
|  | goto err_out_master_unregister; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | #if 0 | 
|  | /* For undoing the slave register if there was a step after it. */ | 
|  | err_out_slave_unregister: | 
|  | driver_unregister(&w1_slave_driver); | 
|  | #endif | 
|  |  | 
|  | err_out_master_unregister: | 
|  | driver_unregister(&w1_master_driver); | 
|  |  | 
|  | err_out_bus_unregister: | 
|  | bus_unregister(&w1_bus_type); | 
|  |  | 
|  | err_out_exit_init: | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void __exit w1_fini(void) | 
|  | { | 
|  | struct w1_master *dev; | 
|  |  | 
|  | /* Set netlink removal messages and some cleanup */ | 
|  | list_for_each_entry(dev, &w1_masters, w1_master_entry) | 
|  | __w1_remove_master_device(dev); | 
|  |  | 
|  | w1_fini_netlink(); | 
|  |  | 
|  | driver_unregister(&w1_slave_driver); | 
|  | driver_unregister(&w1_master_driver); | 
|  | bus_unregister(&w1_bus_type); | 
|  | } | 
|  |  | 
|  | module_init(w1_init); | 
|  | module_exit(w1_fini); | 
|  |  | 
|  | MODULE_AUTHOR("Evgeniy Polyakov <[email protected]>"); | 
|  | MODULE_DESCRIPTION("Driver for 1-wire Dallas network protocol."); | 
|  | MODULE_LICENSE("GPL"); |