drivers/pinctrl/nomadik/pinctrl-ab8505.c - kernel/common - Git at Google

 // SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) ST-Ericsson SA 2012
  *
  * Author: Patrice Chotard <[email protected]> for ST-Ericsson.
  */

 #include <linux/kernel.h>
 #include <linux/pinctrl/pinctrl.h>

 #include <linux/mfd/abx500/ab8500.h>

 #include "pinctrl-abx500.h"

 /* All the pins that can be used for GPIO and some other functions */
 #define ABX500_GPIO(offset)	(offset)

 #define AB8505_PIN_N4		ABX500_GPIO(1)
 #define AB8505_PIN_R5		ABX500_GPIO(2)
 #define AB8505_PIN_P5		ABX500_GPIO(3)
 /* hole */
 #define AB8505_PIN_B16		ABX500_GPIO(10)
 #define AB8505_PIN_B17		ABX500_GPIO(11)
 /* hole */
 #define AB8505_PIN_D17		ABX500_GPIO(13)
 #define AB8505_PIN_C16		ABX500_GPIO(14)
 /* hole */
 #define AB8505_PIN_P2		ABX500_GPIO(17)
 #define AB8505_PIN_N3		ABX500_GPIO(18)
 #define AB8505_PIN_T1		ABX500_GPIO(19)
 #define AB8505_PIN_P3		ABX500_GPIO(20)
 /* hole */
 #define AB8505_PIN_H14		ABX500_GPIO(34)
 /* hole */
 #define AB8505_PIN_J15		ABX500_GPIO(40)
 #define AB8505_PIN_J14		ABX500_GPIO(41)
 /* hole */
 #define AB8505_PIN_L4		ABX500_GPIO(50)
 /* hole */
 #define AB8505_PIN_D16		ABX500_GPIO(52)
 #define AB8505_PIN_D15		ABX500_GPIO(53)

 /* indicates the higher GPIO number */
 #define AB8505_GPIO_MAX_NUMBER	53

 /*
  * The names of the pins are denoted by GPIO number and ball name, even
  * though they can be used for other things than GPIO, this is the first
  * column in the table of the data sheet and often used on schematics and
  * such.
  */
 static const struct pinctrl_pin_desc ab8505_pins[] = {
 	PINCTRL_PIN(AB8505_PIN_N4, "GPIO1_N4"),
 	PINCTRL_PIN(AB8505_PIN_R5, "GPIO2_R5"),
 	PINCTRL_PIN(AB8505_PIN_P5, "GPIO3_P5"),
 /* hole */
 	PINCTRL_PIN(AB8505_PIN_B16, "GPIO10_B16"),
 	PINCTRL_PIN(AB8505_PIN_B17, "GPIO11_B17"),
 /* hole */
 	PINCTRL_PIN(AB8505_PIN_D17, "GPIO13_D17"),
 	PINCTRL_PIN(AB8505_PIN_C16, "GPIO14_C16"),
 /* hole */
 	PINCTRL_PIN(AB8505_PIN_P2, "GPIO17_P2"),
 	PINCTRL_PIN(AB8505_PIN_N3, "GPIO18_N3"),
 	PINCTRL_PIN(AB8505_PIN_T1, "GPIO19_T1"),
 	PINCTRL_PIN(AB8505_PIN_P3, "GPIO20_P3"),
 /* hole */
 	PINCTRL_PIN(AB8505_PIN_H14, "GPIO34_H14"),
 /* hole */
 	PINCTRL_PIN(AB8505_PIN_J15, "GPIO40_J15"),
 	PINCTRL_PIN(AB8505_PIN_J14, "GPIO41_J14"),
 /* hole */
 	PINCTRL_PIN(AB8505_PIN_L4, "GPIO50_L4"),
 /* hole */
 	PINCTRL_PIN(AB8505_PIN_D16, "GPIO52_D16"),
 	PINCTRL_PIN(AB8505_PIN_D15, "GPIO53_D15"),
 };

 /*
  * Maps local GPIO offsets to local pin numbers
  */
 static const struct abx500_pinrange ab8505_pinranges[] = {
 	ABX500_PINRANGE(1, 3, ABX500_ALT_A),
 	ABX500_PINRANGE(10, 2, ABX500_DEFAULT),
 	ABX500_PINRANGE(13, 1, ABX500_DEFAULT),
 	ABX500_PINRANGE(14, 1, ABX500_ALT_A),
 	ABX500_PINRANGE(17, 4, ABX500_ALT_A),
 	ABX500_PINRANGE(34, 1, ABX500_ALT_A),
 	ABX500_PINRANGE(40, 2, ABX500_ALT_A),
 	ABX500_PINRANGE(50, 1, ABX500_DEFAULT),
 	ABX500_PINRANGE(52, 2, ABX500_ALT_A),
 };

 /*
  * Read the pin group names like this:
  * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function
  *
  * The groups are arranged as sets per altfunction column, so we can
  * mux in one group at a time by selecting the same altfunction for them
  * all. When functions require pins on different altfunctions, you need
  * to combine several groups.
  */

 /* default column */
 static const unsigned sysclkreq2_d_1_pins[] = { AB8505_PIN_N4 };
 static const unsigned sysclkreq3_d_1_pins[] = { AB8505_PIN_R5 };
 static const unsigned sysclkreq4_d_1_pins[] = { AB8505_PIN_P5 };
 static const unsigned gpio10_d_1_pins[] = { AB8505_PIN_B16 };
 static const unsigned gpio11_d_1_pins[] = { AB8505_PIN_B17 };
 static const unsigned gpio13_d_1_pins[] = { AB8505_PIN_D17 };
 static const unsigned pwmout1_d_1_pins[] = { AB8505_PIN_C16 };
 /* audio data interface 2*/
 static const unsigned adi2_d_1_pins[] = { AB8505_PIN_P2, AB8505_PIN_N3,
 					AB8505_PIN_T1, AB8505_PIN_P3 };
 static const unsigned extcpena_d_1_pins[] = { AB8505_PIN_H14 };
 /* modem SDA/SCL */
 static const unsigned modsclsda_d_1_pins[] = { AB8505_PIN_J15, AB8505_PIN_J14 };
 static const unsigned gpio50_d_1_pins[] = { AB8505_PIN_L4 };
 static const unsigned resethw_d_1_pins[] = { AB8505_PIN_D16 };
 static const unsigned service_d_1_pins[] = { AB8505_PIN_D15 };

 /* Altfunction A column */
 static const unsigned gpio1_a_1_pins[] = { AB8505_PIN_N4 };
 static const unsigned gpio2_a_1_pins[] = { AB8505_PIN_R5 };
 static const unsigned gpio3_a_1_pins[] = { AB8505_PIN_P5 };
 static const unsigned hiqclkena_a_1_pins[] = { AB8505_PIN_B16 };
 static const unsigned pdmclk_a_1_pins[] = { AB8505_PIN_B17 };
 static const unsigned uarttxdata_a_1_pins[] = { AB8505_PIN_D17 };
 static const unsigned gpio14_a_1_pins[] = { AB8505_PIN_C16 };
 static const unsigned gpio17_a_1_pins[] = { AB8505_PIN_P2 };
 static const unsigned gpio18_a_1_pins[] = { AB8505_PIN_N3 };
 static const unsigned gpio19_a_1_pins[] = { AB8505_PIN_T1 };
 static const unsigned gpio20_a_1_pins[] = { AB8505_PIN_P3 };
 static const unsigned gpio34_a_1_pins[] = { AB8505_PIN_H14 };
 static const unsigned gpio40_a_1_pins[] = { AB8505_PIN_J15 };
 static const unsigned gpio41_a_1_pins[] = { AB8505_PIN_J14 };
 static const unsigned uartrxdata_a_1_pins[] = { AB8505_PIN_J14 };
 static const unsigned gpio50_a_1_pins[] = { AB8505_PIN_L4 };
 static const unsigned gpio52_a_1_pins[] = { AB8505_PIN_D16 };
 static const unsigned gpio53_a_1_pins[] = { AB8505_PIN_D15 };

 /* Altfunction B colum */
 static const unsigned pdmdata_b_1_pins[] = { AB8505_PIN_B16 };
 static const unsigned extvibrapwm1_b_1_pins[] = { AB8505_PIN_D17 };
 static const unsigned extvibrapwm2_b_1_pins[] = { AB8505_PIN_L4 };

 /* Altfunction C column */
 static const unsigned usbvdat_c_1_pins[] = { AB8505_PIN_D17 };

 #define AB8505_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins,		\
 			.npins = ARRAY_SIZE(a##_pins), .altsetting = b }

 static const struct abx500_pingroup ab8505_groups[] = {
 	AB8505_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT),
 	AB8505_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT),
 	AB8505_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT),
 	AB8505_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT),
 	AB8505_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT),
 	AB8505_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT),
 	AB8505_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT),
 	AB8505_PIN_GROUP(adi2_d_1, ABX500_DEFAULT),
 	AB8505_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT),
 	AB8505_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT),
 	AB8505_PIN_GROUP(gpio50_d_1, ABX500_DEFAULT),
 	AB8505_PIN_GROUP(resethw_d_1, ABX500_DEFAULT),
 	AB8505_PIN_GROUP(service_d_1, ABX500_DEFAULT),
 	AB8505_PIN_GROUP(gpio1_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(gpio2_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(gpio3_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(hiqclkena_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(pdmclk_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(uarttxdata_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(gpio14_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(gpio17_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(gpio18_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(gpio19_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(gpio20_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(gpio34_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(gpio40_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(gpio41_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(uartrxdata_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(gpio50_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(gpio52_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(gpio53_a_1, ABX500_ALT_A),
 	AB8505_PIN_GROUP(pdmdata_b_1, ABX500_ALT_B),
 	AB8505_PIN_GROUP(extvibrapwm1_b_1, ABX500_ALT_B),
 	AB8505_PIN_GROUP(extvibrapwm2_b_1, ABX500_ALT_B),
 	AB8505_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C),
 };

 /* We use this macro to define the groups applicable to a function */
 #define AB8505_FUNC_GROUPS(a, b...)	   \
 static const char * const a##_groups[] = { b };

 AB8505_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1",
 		"sysclkreq4_d_1");
 AB8505_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1",
 		"gpio10_d_1", "gpio11_d_1", "gpio13_d_1", "gpio14_a_1",
 		"gpio17_a_1", "gpio18_a_1", "gpio19_a_1", "gpio20_a_1",
 		"gpio34_a_1", "gpio40_a_1", "gpio41_a_1", "gpio50_d_1",
 		"gpio52_a_1", "gpio53_a_1");
 AB8505_FUNC_GROUPS(pwmout, "pwmout1_d_1");
 AB8505_FUNC_GROUPS(adi2, "adi2_d_1");
 AB8505_FUNC_GROUPS(extcpena, "extcpena_d_1");
 AB8505_FUNC_GROUPS(modsclsda, "modsclsda_d_1");
 AB8505_FUNC_GROUPS(resethw, "resethw_d_1");
 AB8505_FUNC_GROUPS(service, "service_d_1");
 AB8505_FUNC_GROUPS(hiqclkena, "hiqclkena_a_1");
 AB8505_FUNC_GROUPS(pdm, "pdmclk_a_1", "pdmdata_b_1");
 AB8505_FUNC_GROUPS(uartdata, "uarttxdata_a_1", "uartrxdata_a_1");
 AB8505_FUNC_GROUPS(extvibra, "extvibrapwm1_b_1", "extvibrapwm2_b_1");
 AB8505_FUNC_GROUPS(usbvdat, "usbvdat_c_1");

 #define FUNCTION(fname)					\
 	{						\
 		.name = #fname,				\
 		.groups = fname##_groups,		\
 		.ngroups = ARRAY_SIZE(fname##_groups),	\
 	}

 static const struct abx500_function ab8505_functions[] = {
 	FUNCTION(sysclkreq),
 	FUNCTION(gpio),
 	FUNCTION(pwmout),
 	FUNCTION(adi2),
 	FUNCTION(extcpena),
 	FUNCTION(modsclsda),
 	FUNCTION(resethw),
 	FUNCTION(service),
 	FUNCTION(hiqclkena),
 	FUNCTION(pdm),
 	FUNCTION(uartdata),
 	FUNCTION(extvibra),
 	FUNCTION(extvibra),
 	FUNCTION(usbvdat),
 };

 /*
  * this table translates what's is in the AB8505 specification regarding the
  * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C).
  * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1,
  * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val),
  *
  * example :
  *
  *	ALTERNATE_FUNCTIONS(13,     4,      3,      4, 1, 0, 2),
  *	means that pin AB8505_PIN_D18 (pin 13) supports 4 mux (default/ALT_A,
  *	ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to
  *	select the mux. ALTA, ALTB and ALTC val indicates values to write in
  *	ALTERNATFUNC register. We need to specifies these values as SOC
  *	designers didn't apply the same logic on how to select mux in the
  *	ABx500 family.
  *
  *	As this pins supports at least ALT_B mux, default mux is
  *	selected by writing 1 in GPIOSEL bit :
  *
  *		| GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3
  *	default	|       1       |          0          |          0
  *	alt_A	|       0       |          0          |          1
  *	alt_B	|       0       |          0          |          0
  *	alt_C	|       0       |          1          |          0
  *
  *	ALTERNATE_FUNCTIONS(1,      0, UNUSED, UNUSED),
  *	means that pin AB9540_PIN_R4 (pin 1) supports 2 mux, so only GPIOSEL
  *	register is used to select the mux. As this pins doesn't support at
  *	least ALT_B mux, default mux is by writing 0 in GPIOSEL bit :
  *
  *		| GPIOSEL bit=0 | alternatfunc bit2=  | alternatfunc bit1=
  *	default	|       0       |          0          |          0
  *	alt_A	|       1       |          0          |          0
  */

 static struct
 alternate_functions ab8505_alternate_functions[AB8505_GPIO_MAX_NUMBER + 1] = {
 	ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */
 	ALTERNATE_FUNCTIONS(1,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */
 	ALTERNATE_FUNCTIONS(2,      1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */
 	ALTERNATE_FUNCTIONS(3,      2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/
 	ALTERNATE_FUNCTIONS(4, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO4, bit 3 reserved */
 	ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5, bit 4 reserved */
 	ALTERNATE_FUNCTIONS(6, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO6, bit 5 reserved */
 	ALTERNATE_FUNCTIONS(7, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO7, bit 6 reserved */
 	ALTERNATE_FUNCTIONS(8, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO8, bit 7 reserved */

 	ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9, bit 0 reserved */
 	ALTERNATE_FUNCTIONS(10,      1,      0, UNUSED, 1, 0, 0), /* GPIO10, altA and altB controlled by bit 0 */
 	ALTERNATE_FUNCTIONS(11,      2,      1, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 2 */
 	ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12, bit3 reserved */
 	ALTERNATE_FUNCTIONS(13,      4,      3,      4, 1, 0, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */
 	ALTERNATE_FUNCTIONS(14,      5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */
 	ALTERNATE_FUNCTIONS(15, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO15, bit 6 reserved */
 	ALTERNATE_FUNCTIONS(16, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO15, bit 7 reserved  */
 	/*
 	 * pins 17 to 20 are special case, only bit 0 is used to select
 	 * alternate function for these 4 pins.
 	 * bits 1 to 3 are reserved
 	 */
 	ALTERNATE_FUNCTIONS(17,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */
 	ALTERNATE_FUNCTIONS(18,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */
 	ALTERNATE_FUNCTIONS(19,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */
 	ALTERNATE_FUNCTIONS(20,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */
 	ALTERNATE_FUNCTIONS(21, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO21, bit 4 reserved */
 	ALTERNATE_FUNCTIONS(22, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO22, bit 5 reserved */
 	ALTERNATE_FUNCTIONS(23, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO23, bit 6 reserved */
 	ALTERNATE_FUNCTIONS(24, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO24, bit 7 reserved */

 	ALTERNATE_FUNCTIONS(25, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO25, bit 0 reserved */
 	ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO26, bit 1 reserved */
 	ALTERNATE_FUNCTIONS(27, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO27, bit 2 reserved */
 	ALTERNATE_FUNCTIONS(28, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO28, bit 3 reserved */
 	ALTERNATE_FUNCTIONS(29, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO29, bit 4 reserved */
 	ALTERNATE_FUNCTIONS(30, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO30, bit 5 reserved */
 	ALTERNATE_FUNCTIONS(31, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO31, bit 6 reserved */
 	ALTERNATE_FUNCTIONS(32, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO32, bit 7 reserved */

 	ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33, bit 0 reserved */
 	ALTERNATE_FUNCTIONS(34,      1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */
 	ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO35, bit 2 reserved */
 	ALTERNATE_FUNCTIONS(36, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO36, bit 2 reserved */
 	ALTERNATE_FUNCTIONS(37, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO37, bit 2 reserved */
 	ALTERNATE_FUNCTIONS(38, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO38, bit 2 reserved */
 	ALTERNATE_FUNCTIONS(39, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO39, bit 2 reserved */
 	ALTERNATE_FUNCTIONS(40,      7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7*/

 	ALTERNATE_FUNCTIONS(41,      0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */
 	ALTERNATE_FUNCTIONS(42, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO42, bit 1 reserved */
 	ALTERNATE_FUNCTIONS(43, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO43, bit 2 reserved */
 	ALTERNATE_FUNCTIONS(44, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO44, bit 3 reserved */
 	ALTERNATE_FUNCTIONS(45, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO45, bit 4 reserved */
 	ALTERNATE_FUNCTIONS(46, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO46, bit 5 reserved */
 	ALTERNATE_FUNCTIONS(47, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO47, bit 6 reserved */
 	ALTERNATE_FUNCTIONS(48, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO48, bit 7 reserved */

 	ALTERNATE_FUNCTIONS(49, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49, bit 0 reserved */
 	ALTERNATE_FUNCTIONS(50,	     1,      2, UNUSED, 1, 0, 0), /* GPIO50, altA controlled by bit 1 */
 	ALTERNATE_FUNCTIONS(51, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49, bit 0 reserved */
 	ALTERNATE_FUNCTIONS(52,	     3, UNUSED, UNUSED, 0, 0, 0), /* GPIO52, altA controlled by bit 3 */
 	ALTERNATE_FUNCTIONS(53,	     4, UNUSED, UNUSED, 0, 0, 0), /* GPIO53, altA controlled by bit 4 */
 };

 /*
  * For AB8505 Only some GPIOs are interrupt capable, and they are
  * organized in discontiguous clusters:
  *
  *	GPIO10 to GPIO11
  *	GPIO13
  *	GPIO40 and GPIO41
  *	GPIO50
  *	GPIO52 to GPIO53
  */
 static struct abx500_gpio_irq_cluster ab8505_gpio_irq_cluster[] = {
 	GPIO_IRQ_CLUSTER(10, 11, AB8500_INT_GPIO10R),
 	GPIO_IRQ_CLUSTER(13, 13, AB8500_INT_GPIO13R),
 	GPIO_IRQ_CLUSTER(40, 41, AB8500_INT_GPIO40R),
 	GPIO_IRQ_CLUSTER(50, 50, AB9540_INT_GPIO50R),
 	GPIO_IRQ_CLUSTER(52, 53, AB9540_INT_GPIO52R),
 };

 static struct abx500_pinctrl_soc_data ab8505_soc = {
 	.gpio_ranges = ab8505_pinranges,
 	.gpio_num_ranges = ARRAY_SIZE(ab8505_pinranges),
 	.pins = ab8505_pins,
 	.npins = ARRAY_SIZE(ab8505_pins),
 	.functions = ab8505_functions,
 	.nfunctions = ARRAY_SIZE(ab8505_functions),
 	.groups = ab8505_groups,
 	.ngroups = ARRAY_SIZE(ab8505_groups),
 	.alternate_functions = ab8505_alternate_functions,
 	.gpio_irq_cluster = ab8505_gpio_irq_cluster,
 	.ngpio_irq_cluster = ARRAY_SIZE(ab8505_gpio_irq_cluster),
 	.irq_gpio_rising_offset = AB8500_INT_GPIO6R,
 	.irq_gpio_falling_offset = AB8500_INT_GPIO6F,
 	.irq_gpio_factor = 1,
 };

 void
 abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc)
 {
 	*soc = &ab8505_soc;
 }
	// SPDX-License-Identifier: GPL-2.0-only
	/*
	* Copyright (C) ST-Ericsson SA 2012
	*
	* Author: Patrice Chotard <[email protected]> for ST-Ericsson.
	*/

	#include <linux/kernel.h>
	#include <linux/pinctrl/pinctrl.h>

	#include <linux/mfd/abx500/ab8500.h>

	#include "pinctrl-abx500.h"

	/* All the pins that can be used for GPIO and some other functions */
	#define ABX500_GPIO(offset) (offset)

	#define AB8505_PIN_N4 ABX500_GPIO(1)
	#define AB8505_PIN_R5 ABX500_GPIO(2)
	#define AB8505_PIN_P5 ABX500_GPIO(3)
	/* hole */
	#define AB8505_PIN_B16 ABX500_GPIO(10)
	#define AB8505_PIN_B17 ABX500_GPIO(11)
	/* hole */
	#define AB8505_PIN_D17 ABX500_GPIO(13)
	#define AB8505_PIN_C16 ABX500_GPIO(14)
	/* hole */
	#define AB8505_PIN_P2 ABX500_GPIO(17)
	#define AB8505_PIN_N3 ABX500_GPIO(18)
	#define AB8505_PIN_T1 ABX500_GPIO(19)
	#define AB8505_PIN_P3 ABX500_GPIO(20)
	/* hole */
	#define AB8505_PIN_H14 ABX500_GPIO(34)
	/* hole */
	#define AB8505_PIN_J15 ABX500_GPIO(40)
	#define AB8505_PIN_J14 ABX500_GPIO(41)
	/* hole */
	#define AB8505_PIN_L4 ABX500_GPIO(50)
	/* hole */
	#define AB8505_PIN_D16 ABX500_GPIO(52)
	#define AB8505_PIN_D15 ABX500_GPIO(53)

	/* indicates the higher GPIO number */
	#define AB8505_GPIO_MAX_NUMBER 53

	/*
	* The names of the pins are denoted by GPIO number and ball name, even
	* though they can be used for other things than GPIO, this is the first
	* column in the table of the data sheet and often used on schematics and
	* such.
	*/
	static const struct pinctrl_pin_desc ab8505_pins[] = {
	PINCTRL_PIN(AB8505_PIN_N4, "GPIO1_N4"),
	PINCTRL_PIN(AB8505_PIN_R5, "GPIO2_R5"),
	PINCTRL_PIN(AB8505_PIN_P5, "GPIO3_P5"),
	/* hole */
	PINCTRL_PIN(AB8505_PIN_B16, "GPIO10_B16"),
	PINCTRL_PIN(AB8505_PIN_B17, "GPIO11_B17"),
	/* hole */
	PINCTRL_PIN(AB8505_PIN_D17, "GPIO13_D17"),
	PINCTRL_PIN(AB8505_PIN_C16, "GPIO14_C16"),
	/* hole */
	PINCTRL_PIN(AB8505_PIN_P2, "GPIO17_P2"),
	PINCTRL_PIN(AB8505_PIN_N3, "GPIO18_N3"),
	PINCTRL_PIN(AB8505_PIN_T1, "GPIO19_T1"),
	PINCTRL_PIN(AB8505_PIN_P3, "GPIO20_P3"),
	/* hole */
	PINCTRL_PIN(AB8505_PIN_H14, "GPIO34_H14"),
	/* hole */
	PINCTRL_PIN(AB8505_PIN_J15, "GPIO40_J15"),
	PINCTRL_PIN(AB8505_PIN_J14, "GPIO41_J14"),
	/* hole */
	PINCTRL_PIN(AB8505_PIN_L4, "GPIO50_L4"),
	/* hole */
	PINCTRL_PIN(AB8505_PIN_D16, "GPIO52_D16"),
	PINCTRL_PIN(AB8505_PIN_D15, "GPIO53_D15"),
	};

	/*
	* Maps local GPIO offsets to local pin numbers
	*/
	static const struct abx500_pinrange ab8505_pinranges[] = {
	ABX500_PINRANGE(1, 3, ABX500_ALT_A),
	ABX500_PINRANGE(10, 2, ABX500_DEFAULT),
	ABX500_PINRANGE(13, 1, ABX500_DEFAULT),
	ABX500_PINRANGE(14, 1, ABX500_ALT_A),
	ABX500_PINRANGE(17, 4, ABX500_ALT_A),
	ABX500_PINRANGE(34, 1, ABX500_ALT_A),
	ABX500_PINRANGE(40, 2, ABX500_ALT_A),
	ABX500_PINRANGE(50, 1, ABX500_DEFAULT),
	ABX500_PINRANGE(52, 2, ABX500_ALT_A),
	};

	/*
	* Read the pin group names like this:
	* sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function
	*
	* The groups are arranged as sets per altfunction column, so we can
	* mux in one group at a time by selecting the same altfunction for them
	* all. When functions require pins on different altfunctions, you need
	* to combine several groups.
	*/

	/* default column */
	static const unsigned sysclkreq2_d_1_pins[] = { AB8505_PIN_N4 };
	static const unsigned sysclkreq3_d_1_pins[] = { AB8505_PIN_R5 };
	static const unsigned sysclkreq4_d_1_pins[] = { AB8505_PIN_P5 };
	static const unsigned gpio10_d_1_pins[] = { AB8505_PIN_B16 };
	static const unsigned gpio11_d_1_pins[] = { AB8505_PIN_B17 };
	static const unsigned gpio13_d_1_pins[] = { AB8505_PIN_D17 };
	static const unsigned pwmout1_d_1_pins[] = { AB8505_PIN_C16 };
	/* audio data interface 2*/
	static const unsigned adi2_d_1_pins[] = { AB8505_PIN_P2, AB8505_PIN_N3,
	AB8505_PIN_T1, AB8505_PIN_P3 };
	static const unsigned extcpena_d_1_pins[] = { AB8505_PIN_H14 };
	/* modem SDA/SCL */
	static const unsigned modsclsda_d_1_pins[] = { AB8505_PIN_J15, AB8505_PIN_J14 };
	static const unsigned gpio50_d_1_pins[] = { AB8505_PIN_L4 };
	static const unsigned resethw_d_1_pins[] = { AB8505_PIN_D16 };
	static const unsigned service_d_1_pins[] = { AB8505_PIN_D15 };

	/* Altfunction A column */
	static const unsigned gpio1_a_1_pins[] = { AB8505_PIN_N4 };
	static const unsigned gpio2_a_1_pins[] = { AB8505_PIN_R5 };
	static const unsigned gpio3_a_1_pins[] = { AB8505_PIN_P5 };
	static const unsigned hiqclkena_a_1_pins[] = { AB8505_PIN_B16 };
	static const unsigned pdmclk_a_1_pins[] = { AB8505_PIN_B17 };
	static const unsigned uarttxdata_a_1_pins[] = { AB8505_PIN_D17 };
	static const unsigned gpio14_a_1_pins[] = { AB8505_PIN_C16 };
	static const unsigned gpio17_a_1_pins[] = { AB8505_PIN_P2 };
	static const unsigned gpio18_a_1_pins[] = { AB8505_PIN_N3 };
	static const unsigned gpio19_a_1_pins[] = { AB8505_PIN_T1 };
	static const unsigned gpio20_a_1_pins[] = { AB8505_PIN_P3 };
	static const unsigned gpio34_a_1_pins[] = { AB8505_PIN_H14 };
	static const unsigned gpio40_a_1_pins[] = { AB8505_PIN_J15 };
	static const unsigned gpio41_a_1_pins[] = { AB8505_PIN_J14 };
	static const unsigned uartrxdata_a_1_pins[] = { AB8505_PIN_J14 };
	static const unsigned gpio50_a_1_pins[] = { AB8505_PIN_L4 };
	static const unsigned gpio52_a_1_pins[] = { AB8505_PIN_D16 };
	static const unsigned gpio53_a_1_pins[] = { AB8505_PIN_D15 };

	/* Altfunction B colum */
	static const unsigned pdmdata_b_1_pins[] = { AB8505_PIN_B16 };
	static const unsigned extvibrapwm1_b_1_pins[] = { AB8505_PIN_D17 };
	static const unsigned extvibrapwm2_b_1_pins[] = { AB8505_PIN_L4 };

	/* Altfunction C column */
	static const unsigned usbvdat_c_1_pins[] = { AB8505_PIN_D17 };

	#define AB8505_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \
	.npins = ARRAY_SIZE(a##_pins), .altsetting = b }

	static const struct abx500_pingroup ab8505_groups[] = {
	AB8505_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT),
	AB8505_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT),
	AB8505_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT),
	AB8505_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT),
	AB8505_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT),
	AB8505_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT),
	AB8505_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT),
	AB8505_PIN_GROUP(adi2_d_1, ABX500_DEFAULT),
	AB8505_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT),
	AB8505_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT),
	AB8505_PIN_GROUP(gpio50_d_1, ABX500_DEFAULT),
	AB8505_PIN_GROUP(resethw_d_1, ABX500_DEFAULT),
	AB8505_PIN_GROUP(service_d_1, ABX500_DEFAULT),
	AB8505_PIN_GROUP(gpio1_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(gpio2_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(gpio3_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(hiqclkena_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(pdmclk_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(uarttxdata_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(gpio14_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(gpio17_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(gpio18_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(gpio19_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(gpio20_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(gpio34_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(gpio40_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(gpio41_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(uartrxdata_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(gpio50_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(gpio52_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(gpio53_a_1, ABX500_ALT_A),
	AB8505_PIN_GROUP(pdmdata_b_1, ABX500_ALT_B),
	AB8505_PIN_GROUP(extvibrapwm1_b_1, ABX500_ALT_B),
	AB8505_PIN_GROUP(extvibrapwm2_b_1, ABX500_ALT_B),
	AB8505_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C),
	};

	/* We use this macro to define the groups applicable to a function */
	#define AB8505_FUNC_GROUPS(a, b...) \
	static const char * const a##_groups[] = { b };

	AB8505_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1",
	"sysclkreq4_d_1");
	AB8505_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1",
	"gpio10_d_1", "gpio11_d_1", "gpio13_d_1", "gpio14_a_1",
	"gpio17_a_1", "gpio18_a_1", "gpio19_a_1", "gpio20_a_1",
	"gpio34_a_1", "gpio40_a_1", "gpio41_a_1", "gpio50_d_1",
	"gpio52_a_1", "gpio53_a_1");
	AB8505_FUNC_GROUPS(pwmout, "pwmout1_d_1");
	AB8505_FUNC_GROUPS(adi2, "adi2_d_1");
	AB8505_FUNC_GROUPS(extcpena, "extcpena_d_1");
	AB8505_FUNC_GROUPS(modsclsda, "modsclsda_d_1");
	AB8505_FUNC_GROUPS(resethw, "resethw_d_1");
	AB8505_FUNC_GROUPS(service, "service_d_1");
	AB8505_FUNC_GROUPS(hiqclkena, "hiqclkena_a_1");
	AB8505_FUNC_GROUPS(pdm, "pdmclk_a_1", "pdmdata_b_1");
	AB8505_FUNC_GROUPS(uartdata, "uarttxdata_a_1", "uartrxdata_a_1");
	AB8505_FUNC_GROUPS(extvibra, "extvibrapwm1_b_1", "extvibrapwm2_b_1");
	AB8505_FUNC_GROUPS(usbvdat, "usbvdat_c_1");

	#define FUNCTION(fname) \
	{ \
	.name = #fname, \
	.groups = fname##_groups, \
	.ngroups = ARRAY_SIZE(fname##_groups), \
	}

	static const struct abx500_function ab8505_functions[] = {
	FUNCTION(sysclkreq),
	FUNCTION(gpio),
	FUNCTION(pwmout),
	FUNCTION(adi2),
	FUNCTION(extcpena),
	FUNCTION(modsclsda),
	FUNCTION(resethw),
	FUNCTION(service),
	FUNCTION(hiqclkena),
	FUNCTION(pdm),
	FUNCTION(uartdata),
	FUNCTION(extvibra),
	FUNCTION(extvibra),
	FUNCTION(usbvdat),
	};

	/*
	* this table translates what's is in the AB8505 specification regarding the
	* balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C).
	* ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1,
	* ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val),
	*
	* example :
	*
	* ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2),
	* means that pin AB8505_PIN_D18 (pin 13) supports 4 mux (default/ALT_A,
	* ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to
	* select the mux. ALTA, ALTB and ALTC val indicates values to write in
	* ALTERNATFUNC register. We need to specifies these values as SOC
	* designers didn't apply the same logic on how to select mux in the
	* ABx500 family.
	*
	* As this pins supports at least ALT_B mux, default mux is
	* selected by writing 1 in GPIOSEL bit :
	*
	* \| GPIOSEL bit=4 \| alternatfunc bit2=4 \| alternatfunc bit1=3
	* default \| 1 \| 0 \| 0
	* alt_A \| 0 \| 0 \| 1
	* alt_B \| 0 \| 0 \| 0
	* alt_C \| 0 \| 1 \| 0
	*
	* ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED),
	* means that pin AB9540_PIN_R4 (pin 1) supports 2 mux, so only GPIOSEL
	* register is used to select the mux. As this pins doesn't support at
	* least ALT_B mux, default mux is by writing 0 in GPIOSEL bit :
	*
	* \| GPIOSEL bit=0 \| alternatfunc bit2= \| alternatfunc bit1=
	* default \| 0 \| 0 \| 0
	* alt_A \| 1 \| 0 \| 0
	*/

	static struct
	alternate_functions ab8505_alternate_functions[AB8505_GPIO_MAX_NUMBER + 1] = {
	ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */
	ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */
	ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */
	ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/
	ALTERNATE_FUNCTIONS(4, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO4, bit 3 reserved */
	ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5, bit 4 reserved */
	ALTERNATE_FUNCTIONS(6, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO6, bit 5 reserved */
	ALTERNATE_FUNCTIONS(7, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO7, bit 6 reserved */
	ALTERNATE_FUNCTIONS(8, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO8, bit 7 reserved */

	ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9, bit 0 reserved */
	ALTERNATE_FUNCTIONS(10, 1, 0, UNUSED, 1, 0, 0), /* GPIO10, altA and altB controlled by bit 0 */
	ALTERNATE_FUNCTIONS(11, 2, 1, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 2 */
	ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12, bit3 reserved */
	ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */
	ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */
	ALTERNATE_FUNCTIONS(15, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO15, bit 6 reserved */
	ALTERNATE_FUNCTIONS(16, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO15, bit 7 reserved */
	/*
	* pins 17 to 20 are special case, only bit 0 is used to select
	* alternate function for these 4 pins.
	* bits 1 to 3 are reserved
	*/
	ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */
	ALTERNATE_FUNCTIONS(18, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */
	ALTERNATE_FUNCTIONS(19, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */
	ALTERNATE_FUNCTIONS(20, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */
	ALTERNATE_FUNCTIONS(21, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO21, bit 4 reserved */
	ALTERNATE_FUNCTIONS(22, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO22, bit 5 reserved */
	ALTERNATE_FUNCTIONS(23, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO23, bit 6 reserved */
	ALTERNATE_FUNCTIONS(24, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO24, bit 7 reserved */

	ALTERNATE_FUNCTIONS(25, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO25, bit 0 reserved */
	ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO26, bit 1 reserved */
	ALTERNATE_FUNCTIONS(27, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO27, bit 2 reserved */
	ALTERNATE_FUNCTIONS(28, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO28, bit 3 reserved */
	ALTERNATE_FUNCTIONS(29, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO29, bit 4 reserved */
	ALTERNATE_FUNCTIONS(30, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO30, bit 5 reserved */
	ALTERNATE_FUNCTIONS(31, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO31, bit 6 reserved */
	ALTERNATE_FUNCTIONS(32, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO32, bit 7 reserved */

	ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33, bit 0 reserved */
	ALTERNATE_FUNCTIONS(34, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */
	ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO35, bit 2 reserved */
	ALTERNATE_FUNCTIONS(36, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO36, bit 2 reserved */
	ALTERNATE_FUNCTIONS(37, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO37, bit 2 reserved */
	ALTERNATE_FUNCTIONS(38, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO38, bit 2 reserved */
	ALTERNATE_FUNCTIONS(39, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO39, bit 2 reserved */
	ALTERNATE_FUNCTIONS(40, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7*/

	ALTERNATE_FUNCTIONS(41, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */
	ALTERNATE_FUNCTIONS(42, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO42, bit 1 reserved */
	ALTERNATE_FUNCTIONS(43, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO43, bit 2 reserved */
	ALTERNATE_FUNCTIONS(44, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO44, bit 3 reserved */
	ALTERNATE_FUNCTIONS(45, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO45, bit 4 reserved */
	ALTERNATE_FUNCTIONS(46, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO46, bit 5 reserved */
	ALTERNATE_FUNCTIONS(47, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO47, bit 6 reserved */
	ALTERNATE_FUNCTIONS(48, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO48, bit 7 reserved */

	ALTERNATE_FUNCTIONS(49, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49, bit 0 reserved */
	ALTERNATE_FUNCTIONS(50, 1, 2, UNUSED, 1, 0, 0), /* GPIO50, altA controlled by bit 1 */
	ALTERNATE_FUNCTIONS(51, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49, bit 0 reserved */
	ALTERNATE_FUNCTIONS(52, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO52, altA controlled by bit 3 */
	ALTERNATE_FUNCTIONS(53, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO53, altA controlled by bit 4 */
	};

	/*
	* For AB8505 Only some GPIOs are interrupt capable, and they are
	* organized in discontiguous clusters:
	*
	* GPIO10 to GPIO11
	* GPIO13
	* GPIO40 and GPIO41
	* GPIO50
	* GPIO52 to GPIO53
	*/
	static struct abx500_gpio_irq_cluster ab8505_gpio_irq_cluster[] = {
	GPIO_IRQ_CLUSTER(10, 11, AB8500_INT_GPIO10R),
	GPIO_IRQ_CLUSTER(13, 13, AB8500_INT_GPIO13R),
	GPIO_IRQ_CLUSTER(40, 41, AB8500_INT_GPIO40R),
	GPIO_IRQ_CLUSTER(50, 50, AB9540_INT_GPIO50R),
	GPIO_IRQ_CLUSTER(52, 53, AB9540_INT_GPIO52R),
	};

	static struct abx500_pinctrl_soc_data ab8505_soc = {
	.gpio_ranges = ab8505_pinranges,
	.gpio_num_ranges = ARRAY_SIZE(ab8505_pinranges),
	.pins = ab8505_pins,
	.npins = ARRAY_SIZE(ab8505_pins),
	.functions = ab8505_functions,
	.nfunctions = ARRAY_SIZE(ab8505_functions),
	.groups = ab8505_groups,
	.ngroups = ARRAY_SIZE(ab8505_groups),
	.alternate_functions = ab8505_alternate_functions,
	.gpio_irq_cluster = ab8505_gpio_irq_cluster,
	.ngpio_irq_cluster = ARRAY_SIZE(ab8505_gpio_irq_cluster),
	.irq_gpio_rising_offset = AB8500_INT_GPIO6R,
	.irq_gpio_falling_offset = AB8500_INT_GPIO6F,
	.irq_gpio_factor = 1,
	};

	void
	abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc)
	{
	*soc = &ab8505_soc;
	}