|  | /* | 
|  | * ADLX345/346 Three-Axis Digital Accelerometers (I2C Interface) | 
|  | * | 
|  | * Enter bugs at http://blackfin.uclinux.org/ | 
|  | * | 
|  | * Copyright (C) 2009 Michael Hennerich, Analog Devices Inc. | 
|  | * Licensed under the GPL-2 or later. | 
|  | */ | 
|  |  | 
|  | #include <linux/input.h>	/* BUS_I2C */ | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/pm.h> | 
|  | #include "adxl34x.h" | 
|  |  | 
|  | static int adxl34x_smbus_read(struct device *dev, unsigned char reg) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  |  | 
|  | return i2c_smbus_read_byte_data(client, reg); | 
|  | } | 
|  |  | 
|  | static int adxl34x_smbus_write(struct device *dev, | 
|  | unsigned char reg, unsigned char val) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  |  | 
|  | return i2c_smbus_write_byte_data(client, reg, val); | 
|  | } | 
|  |  | 
|  | static int adxl34x_smbus_read_block(struct device *dev, | 
|  | unsigned char reg, int count, | 
|  | void *buf) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  |  | 
|  | return i2c_smbus_read_i2c_block_data(client, reg, count, buf); | 
|  | } | 
|  |  | 
|  | static int adxl34x_i2c_read_block(struct device *dev, | 
|  | unsigned char reg, int count, | 
|  | void *buf) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | int ret; | 
|  |  | 
|  | ret = i2c_master_send(client, ®, 1); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | ret = i2c_master_recv(client, buf, count); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  |  | 
|  | if (ret != count) | 
|  | return -EIO; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct adxl34x_bus_ops adxl34x_smbus_bops = { | 
|  | .bustype	= BUS_I2C, | 
|  | .write		= adxl34x_smbus_write, | 
|  | .read		= adxl34x_smbus_read, | 
|  | .read_block	= adxl34x_smbus_read_block, | 
|  | }; | 
|  |  | 
|  | static const struct adxl34x_bus_ops adxl34x_i2c_bops = { | 
|  | .bustype	= BUS_I2C, | 
|  | .write		= adxl34x_smbus_write, | 
|  | .read		= adxl34x_smbus_read, | 
|  | .read_block	= adxl34x_i2c_read_block, | 
|  | }; | 
|  |  | 
|  | static int __devinit adxl34x_i2c_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct adxl34x *ac; | 
|  | int error; | 
|  |  | 
|  | error = i2c_check_functionality(client->adapter, | 
|  | I2C_FUNC_SMBUS_BYTE_DATA); | 
|  | if (!error) { | 
|  | dev_err(&client->dev, "SMBUS Byte Data not Supported\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | ac = adxl34x_probe(&client->dev, client->irq, false, | 
|  | i2c_check_functionality(client->adapter, | 
|  | I2C_FUNC_SMBUS_READ_I2C_BLOCK) ? | 
|  | &adxl34x_smbus_bops : &adxl34x_i2c_bops); | 
|  | if (IS_ERR(ac)) | 
|  | return PTR_ERR(ac); | 
|  |  | 
|  | i2c_set_clientdata(client, ac); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int __devexit adxl34x_i2c_remove(struct i2c_client *client) | 
|  | { | 
|  | struct adxl34x *ac = i2c_get_clientdata(client); | 
|  |  | 
|  | return adxl34x_remove(ac); | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int adxl34x_i2c_suspend(struct device *dev) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct adxl34x *ac = i2c_get_clientdata(client); | 
|  |  | 
|  | adxl34x_suspend(ac); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int adxl34x_i2c_resume(struct device *dev) | 
|  | { | 
|  | struct i2c_client *client = to_i2c_client(dev); | 
|  | struct adxl34x *ac = i2c_get_clientdata(client); | 
|  |  | 
|  | adxl34x_resume(ac); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #endif | 
|  |  | 
|  | static SIMPLE_DEV_PM_OPS(adxl34x_i2c_pm, adxl34x_i2c_suspend, | 
|  | adxl34x_i2c_resume); | 
|  |  | 
|  | static const struct i2c_device_id adxl34x_id[] = { | 
|  | { "adxl34x", 0 }, | 
|  | { } | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(i2c, adxl34x_id); | 
|  |  | 
|  | static struct i2c_driver adxl34x_driver = { | 
|  | .driver = { | 
|  | .name = "adxl34x", | 
|  | .owner = THIS_MODULE, | 
|  | .pm = &adxl34x_i2c_pm, | 
|  | }, | 
|  | .probe    = adxl34x_i2c_probe, | 
|  | .remove   = __devexit_p(adxl34x_i2c_remove), | 
|  | .id_table = adxl34x_id, | 
|  | }; | 
|  |  | 
|  | static int __init adxl34x_i2c_init(void) | 
|  | { | 
|  | return i2c_add_driver(&adxl34x_driver); | 
|  | } | 
|  | module_init(adxl34x_i2c_init); | 
|  |  | 
|  | static void __exit adxl34x_i2c_exit(void) | 
|  | { | 
|  | i2c_del_driver(&adxl34x_driver); | 
|  | } | 
|  | module_exit(adxl34x_i2c_exit); | 
|  |  | 
|  | MODULE_AUTHOR("Michael Hennerich <[email protected]>"); | 
|  | MODULE_DESCRIPTION("ADXL345/346 Three-Axis Digital Accelerometer I2C Bus Driver"); | 
|  | MODULE_LICENSE("GPL"); |