|  | /* | 
|  | * lm70.c | 
|  | * | 
|  | * The LM70 is a temperature sensor chip from National Semiconductor (NS). | 
|  | * Copyright (C) 2006 Kaiwan N Billimoria <[email protected]> | 
|  | * | 
|  | * The LM70 communicates with a host processor via an SPI/Microwire Bus | 
|  | * interface. The complete datasheet is available at National's website | 
|  | * here: | 
|  | * http://www.national.com/pf/LM/LM70.html | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/sysfs.h> | 
|  | #include <linux/hwmon.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/mod_devicetable.h> | 
|  | #include <linux/spi/spi.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  |  | 
|  | #define DRVNAME		"lm70" | 
|  |  | 
|  | #define LM70_CHIP_LM70		0	/* original NS LM70 */ | 
|  | #define LM70_CHIP_TMP121	1	/* TI TMP121/TMP123 */ | 
|  | #define LM70_CHIP_LM71		2	/* NS LM71 */ | 
|  | #define LM70_CHIP_LM74		3	/* NS LM74 */ | 
|  |  | 
|  | struct lm70 { | 
|  | struct spi_device *spi; | 
|  | struct mutex lock; | 
|  | unsigned int chip; | 
|  | }; | 
|  |  | 
|  | /* sysfs hook function */ | 
|  | static ssize_t lm70_sense_temp(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct lm70 *p_lm70 = dev_get_drvdata(dev); | 
|  | struct spi_device *spi = p_lm70->spi; | 
|  | int status, val = 0; | 
|  | u8 rxbuf[2]; | 
|  | s16 raw = 0; | 
|  |  | 
|  | if (mutex_lock_interruptible(&p_lm70->lock)) | 
|  | return -ERESTARTSYS; | 
|  |  | 
|  | /* | 
|  | * spi_read() requires a DMA-safe buffer; so we use | 
|  | * spi_write_then_read(), transmitting 0 bytes. | 
|  | */ | 
|  | status = spi_write_then_read(spi, NULL, 0, &rxbuf[0], 2); | 
|  | if (status < 0) { | 
|  | pr_warn("spi_write_then_read failed with status %d\n", status); | 
|  | goto out; | 
|  | } | 
|  | raw = (rxbuf[0] << 8) + rxbuf[1]; | 
|  | dev_dbg(dev, "rxbuf[0] : 0x%02x rxbuf[1] : 0x%02x raw=0x%04x\n", | 
|  | rxbuf[0], rxbuf[1], raw); | 
|  |  | 
|  | /* | 
|  | * LM70: | 
|  | * The "raw" temperature read into rxbuf[] is a 16-bit signed 2's | 
|  | * complement value. Only the MSB 11 bits (1 sign + 10 temperature | 
|  | * bits) are meaningful; the LSB 5 bits are to be discarded. | 
|  | * See the datasheet. | 
|  | * | 
|  | * Further, each bit represents 0.25 degrees Celsius; so, multiply | 
|  | * by 0.25. Also multiply by 1000 to represent in millidegrees | 
|  | * Celsius. | 
|  | * So it's equivalent to multiplying by 0.25 * 1000 = 250. | 
|  | * | 
|  | * LM74 and TMP121/TMP123: | 
|  | * 13 bits of 2's complement data, discard LSB 3 bits, | 
|  | * resolution 0.0625 degrees celsius. | 
|  | * | 
|  | * LM71: | 
|  | * 14 bits of 2's complement data, discard LSB 2 bits, | 
|  | * resolution 0.0312 degrees celsius. | 
|  | */ | 
|  | switch (p_lm70->chip) { | 
|  | case LM70_CHIP_LM70: | 
|  | val = ((int)raw / 32) * 250; | 
|  | break; | 
|  |  | 
|  | case LM70_CHIP_TMP121: | 
|  | case LM70_CHIP_LM74: | 
|  | val = ((int)raw / 8) * 625 / 10; | 
|  | break; | 
|  |  | 
|  | case LM70_CHIP_LM71: | 
|  | val = ((int)raw / 4) * 3125 / 100; | 
|  | break; | 
|  | } | 
|  |  | 
|  | status = sprintf(buf, "%d\n", val); /* millidegrees Celsius */ | 
|  | out: | 
|  | mutex_unlock(&p_lm70->lock); | 
|  | return status; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(temp1_input, S_IRUGO, lm70_sense_temp, NULL); | 
|  |  | 
|  | static struct attribute *lm70_attrs[] = { | 
|  | &dev_attr_temp1_input.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | ATTRIBUTE_GROUPS(lm70); | 
|  |  | 
|  | /*----------------------------------------------------------------------*/ | 
|  |  | 
|  | static int lm70_probe(struct spi_device *spi) | 
|  | { | 
|  | int chip = spi_get_device_id(spi)->driver_data; | 
|  | struct device *hwmon_dev; | 
|  | struct lm70 *p_lm70; | 
|  |  | 
|  | /* signaling is SPI_MODE_0 */ | 
|  | if (spi->mode & (SPI_CPOL | SPI_CPHA)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* NOTE:  we assume 8-bit words, and convert to 16 bits manually */ | 
|  |  | 
|  | p_lm70 = devm_kzalloc(&spi->dev, sizeof(*p_lm70), GFP_KERNEL); | 
|  | if (!p_lm70) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mutex_init(&p_lm70->lock); | 
|  | p_lm70->chip = chip; | 
|  | p_lm70->spi = spi; | 
|  |  | 
|  | hwmon_dev = devm_hwmon_device_register_with_groups(&spi->dev, | 
|  | spi->modalias, | 
|  | p_lm70, lm70_groups); | 
|  | return PTR_ERR_OR_ZERO(hwmon_dev); | 
|  | } | 
|  |  | 
|  | static const struct spi_device_id lm70_ids[] = { | 
|  | { "lm70",   LM70_CHIP_LM70 }, | 
|  | { "tmp121", LM70_CHIP_TMP121 }, | 
|  | { "lm71",   LM70_CHIP_LM71 }, | 
|  | { "lm74",   LM70_CHIP_LM74 }, | 
|  | { }, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(spi, lm70_ids); | 
|  |  | 
|  | static struct spi_driver lm70_driver = { | 
|  | .driver = { | 
|  | .name	= "lm70", | 
|  | .owner	= THIS_MODULE, | 
|  | }, | 
|  | .id_table = lm70_ids, | 
|  | .probe	= lm70_probe, | 
|  | }; | 
|  |  | 
|  | module_spi_driver(lm70_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Kaiwan N Billimoria"); | 
|  | MODULE_DESCRIPTION("NS LM70 and compatibles Linux driver"); | 
|  | MODULE_LICENSE("GPL"); |