drivers/usb/serial/spcp8x5.c - kernel/common - Git at Google

 /*
  * spcp8x5 USB to serial adaptor driver
  *
  * Copyright (C) 2010-2013 Johan Hovold ([email protected])
  * Copyright (C) 2006 Linxb ([email protected])
  * Copyright (C) 2006 S1 Corp.
  *
  * Original driver for 2.6.10 pl2303 driver by
  *   Greg Kroah-Hartman ([email protected])
  * Changes for 2.6.20 by Harald Klein <[email protected]>
  *
  *	This program is free software; you can redistribute it and/or modify
  *	it under the terms of the GNU General Public License as published by
  *	the Free Software Foundation; either version 2 of the License, or
  *	(at your option) any later version.
  */
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/tty.h>
 #include <linux/tty_driver.h>
 #include <linux/tty_flip.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>

 #define DRIVER_DESC	"SPCP8x5 USB to serial adaptor driver"

 #define SPCP825_QUIRK_NO_UART_STATUS	0x01
 #define SPCP825_QUIRK_NO_WORK_MODE	0x02

 #define SPCP8x5_007_VID		0x04FC
 #define SPCP8x5_007_PID		0x0201
 #define SPCP8x5_008_VID		0x04fc
 #define SPCP8x5_008_PID		0x0235
 #define SPCP8x5_PHILIPS_VID	0x0471
 #define SPCP8x5_PHILIPS_PID	0x081e
 #define SPCP8x5_INTERMATIC_VID	0x04FC
 #define SPCP8x5_INTERMATIC_PID	0x0204
 #define SPCP8x5_835_VID		0x04fc
 #define SPCP8x5_835_PID		0x0231

 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
 	{ USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
 	{ USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
 	{ USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
 	{ USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID),
 	  .driver_info = SPCP825_QUIRK_NO_UART_STATUS |
 				SPCP825_QUIRK_NO_WORK_MODE },
 	{ }					/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, id_table);

 struct spcp8x5_usb_ctrl_arg {
 	u8	type;
 	u8	cmd;
 	u8	cmd_type;
 	u16	value;
 	u16	index;
 	u16	length;
 };


 /* spcp8x5 spec register define */
 #define MCR_CONTROL_LINE_RTS		0x02
 #define MCR_CONTROL_LINE_DTR		0x01
 #define MCR_DTR				0x01
 #define MCR_RTS				0x02

 #define MSR_STATUS_LINE_DCD		0x80
 #define MSR_STATUS_LINE_RI		0x40
 #define MSR_STATUS_LINE_DSR		0x20
 #define MSR_STATUS_LINE_CTS		0x10

 /* verdor command here , we should define myself */
 #define SET_DEFAULT			0x40
 #define SET_DEFAULT_TYPE		0x20

 #define SET_UART_FORMAT			0x40
 #define SET_UART_FORMAT_TYPE		0x21
 #define SET_UART_FORMAT_SIZE_5		0x00
 #define SET_UART_FORMAT_SIZE_6		0x01
 #define SET_UART_FORMAT_SIZE_7		0x02
 #define SET_UART_FORMAT_SIZE_8		0x03
 #define SET_UART_FORMAT_STOP_1		0x00
 #define SET_UART_FORMAT_STOP_2		0x04
 #define SET_UART_FORMAT_PAR_NONE	0x00
 #define SET_UART_FORMAT_PAR_ODD		0x10
 #define SET_UART_FORMAT_PAR_EVEN	0x30
 #define SET_UART_FORMAT_PAR_MASK	0xD0
 #define SET_UART_FORMAT_PAR_SPACE	0x90

 #define GET_UART_STATUS_TYPE		0xc0
 #define GET_UART_STATUS			0x22
 #define GET_UART_STATUS_MSR		0x06

 #define SET_UART_STATUS			0x40
 #define SET_UART_STATUS_TYPE		0x23
 #define SET_UART_STATUS_MCR		0x0004
 #define SET_UART_STATUS_MCR_DTR		0x01
 #define SET_UART_STATUS_MCR_RTS		0x02
 #define SET_UART_STATUS_MCR_LOOP	0x10

 #define SET_WORKING_MODE		0x40
 #define SET_WORKING_MODE_TYPE		0x24
 #define SET_WORKING_MODE_U2C		0x00
 #define SET_WORKING_MODE_RS485		0x01
 #define SET_WORKING_MODE_PDMA		0x02
 #define SET_WORKING_MODE_SPP		0x03

 #define SET_FLOWCTL_CHAR		0x40
 #define SET_FLOWCTL_CHAR_TYPE		0x25

 #define GET_VERSION			0xc0
 #define GET_VERSION_TYPE		0x26

 #define SET_REGISTER			0x40
 #define SET_REGISTER_TYPE		0x27

 #define	GET_REGISTER			0xc0
 #define GET_REGISTER_TYPE		0x28

 #define SET_RAM				0x40
 #define SET_RAM_TYPE			0x31

 #define GET_RAM				0xc0
 #define GET_RAM_TYPE			0x32

 /* how come ??? */
 #define UART_STATE			0x08
 #define UART_STATE_TRANSIENT_MASK	0x75
 #define UART_DCD			0x01
 #define UART_DSR			0x02
 #define UART_BREAK_ERROR		0x04
 #define UART_RING			0x08
 #define UART_FRAME_ERROR		0x10
 #define UART_PARITY_ERROR		0x20
 #define UART_OVERRUN_ERROR		0x40
 #define UART_CTS			0x80

 struct spcp8x5_private {
 	unsigned		quirks;
 	spinlock_t		lock;
 	u8			line_control;
 };

 static int spcp8x5_probe(struct usb_serial *serial,
 						const struct usb_device_id *id)
 {
 	usb_set_serial_data(serial, (void *)id);

 	return 0;
 }

 static int spcp8x5_port_probe(struct usb_serial_port *port)
 {
 	const struct usb_device_id *id = usb_get_serial_data(port->serial);
 	struct spcp8x5_private *priv;

 	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;

 	spin_lock_init(&priv->lock);
 	priv->quirks = id->driver_info;

 	usb_set_serial_port_data(port, priv);

 	port->port.drain_delay = 256;

 	return 0;
 }

 static int spcp8x5_port_remove(struct usb_serial_port *port)
 {
 	struct spcp8x5_private *priv;

 	priv = usb_get_serial_port_data(port);
 	kfree(priv);

 	return 0;
 }

 static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr)
 {
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	struct usb_device *dev = port->serial->dev;
 	int retval;

 	if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
 		return -EPERM;

 	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 				 SET_UART_STATUS_TYPE, SET_UART_STATUS,
 				 mcr, 0x04, NULL, 0, 100);
 	if (retval != 0) {
 		dev_err(&port->dev, "failed to set control lines: %d\n",
 								retval);
 	}
 	return retval;
 }

 static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
 {
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	struct usb_device *dev = port->serial->dev;
 	u8 *buf;
 	int ret;

 	if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
 		return -EPERM;

 	buf = kzalloc(1, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;

 	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 			      GET_UART_STATUS, GET_UART_STATUS_TYPE,
 			      0, GET_UART_STATUS_MSR, buf, 1, 100);
 	if (ret < 0)
 		dev_err(&port->dev, "failed to get modem status: %d\n", ret);

 	dev_dbg(&port->dev, "0xc0:0x22:0:6  %d - 0x02%x\n", ret, *buf);
 	*status = *buf;
 	kfree(buf);

 	return ret;
 }

 static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value,
 								 u16 index)
 {
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	struct usb_device *dev = port->serial->dev;
 	int ret;

 	if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE)
 		return;

 	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 			      SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
 			      value, index, NULL, 0, 100);
 	dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index);
 	if (ret < 0)
 		dev_err(&port->dev, "failed to set work mode: %d\n", ret);
 }

 static int spcp8x5_carrier_raised(struct usb_serial_port *port)
 {
 	u8 msr;
 	int ret;

 	ret = spcp8x5_get_msr(port, &msr);
 	if (ret || msr & MSR_STATUS_LINE_DCD)
 		return 1;

 	return 0;
 }

 static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
 {
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	u8 control;

 	spin_lock_irqsave(&priv->lock, flags);
 	if (on)
 		priv->line_control = MCR_CONTROL_LINE_DTR
 						| MCR_CONTROL_LINE_RTS;
 	else
 		priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
 						| MCR_CONTROL_LINE_RTS);
 	control = priv->line_control;
 	spin_unlock_irqrestore(&priv->lock, flags);
 	spcp8x5_set_ctrl_line(port, control);
 }

 static void spcp8x5_init_termios(struct tty_struct *tty)
 {
 	tty->termios = tty_std_termios;
 	tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
 	tty->termios.c_ispeed = 115200;
 	tty->termios.c_ospeed = 115200;
 }

 static void spcp8x5_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
 	struct usb_serial *serial = port->serial;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int cflag = tty->termios.c_cflag;
 	unsigned short uartdata;
 	unsigned char buf[2] = {0, 0};
 	int baud;
 	int i;
 	u8 control;

 	/* check that they really want us to change something */
 	if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
 		return;

 	/* set DTR/RTS active */
 	spin_lock_irqsave(&priv->lock, flags);
 	control = priv->line_control;
 	if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
 		priv->line_control |= MCR_DTR;
 		if (!(old_termios->c_cflag & CRTSCTS))
 			priv->line_control |= MCR_RTS;
 	}
 	if (control != priv->line_control) {
 		control = priv->line_control;
 		spin_unlock_irqrestore(&priv->lock, flags);
 		spcp8x5_set_ctrl_line(port, control);
 	} else {
 		spin_unlock_irqrestore(&priv->lock, flags);
 	}

 	/* Set Baud Rate */
 	baud = tty_get_baud_rate(tty);
 	switch (baud) {
 	case 300:	buf[0] = 0x00;	break;
 	case 600:	buf[0] = 0x01;	break;
 	case 1200:	buf[0] = 0x02;	break;
 	case 2400:	buf[0] = 0x03;	break;
 	case 4800:	buf[0] = 0x04;	break;
 	case 9600:	buf[0] = 0x05;	break;
 	case 19200:	buf[0] = 0x07;	break;
 	case 38400:	buf[0] = 0x09;	break;
 	case 57600:	buf[0] = 0x0a;	break;
 	case 115200:	buf[0] = 0x0b;	break;
 	case 230400:	buf[0] = 0x0c;	break;
 	case 460800:	buf[0] = 0x0d;	break;
 	case 921600:	buf[0] = 0x0e;	break;
 /*	case 1200000:	buf[0] = 0x0f;	break; */
 /*	case 2400000:	buf[0] = 0x10;	break; */
 	case 3000000:	buf[0] = 0x11;	break;
 /*	case 6000000:	buf[0] = 0x12;	break; */
 	case 0:
 	case 1000000:
 			buf[0] = 0x0b;	break;
 	default:
 		dev_err(&port->dev, "unsupported baudrate, using 9600\n");
 	}

 	/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
 	switch (cflag & CSIZE) {
 	case CS5:
 		buf[1] |= SET_UART_FORMAT_SIZE_5;
 		break;
 	case CS6:
 		buf[1] |= SET_UART_FORMAT_SIZE_6;
 		break;
 	case CS7:
 		buf[1] |= SET_UART_FORMAT_SIZE_7;
 		break;
 	default:
 	case CS8:
 		buf[1] |= SET_UART_FORMAT_SIZE_8;
 		break;
 	}

 	/* Set Stop bit2 : 0:1bit 1:2bit */
 	buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 :
 				     SET_UART_FORMAT_STOP_1;

 	/* Set Parity bit3-4 01:Odd 11:Even */
 	if (cflag & PARENB) {
 		buf[1] |= (cflag & PARODD) ?
 		SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
 	} else {
 		buf[1] |= SET_UART_FORMAT_PAR_NONE;
 	}
 	uartdata = buf[0] | buf[1]<<8;

 	i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			    SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
 			    uartdata, 0, NULL, 0, 100);
 	if (i < 0)
 		dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
 			uartdata, i);
 	dev_dbg(&port->dev, "0x21:0x40:0:0  %d\n", i);

 	if (cflag & CRTSCTS) {
 		/* enable hardware flow control */
 		spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C);
 	}
 }

 static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	int ret;

 	usb_clear_halt(serial->dev, port->write_urb->pipe);
 	usb_clear_halt(serial->dev, port->read_urb->pipe);

 	ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			      0x09, 0x00,
 			      0x01, 0x00, NULL, 0x00, 100);
 	if (ret)
 		return ret;

 	spcp8x5_set_ctrl_line(port, priv->line_control);

 	if (tty)
 		spcp8x5_set_termios(tty, port, NULL);

 	return usb_serial_generic_open(tty, port);
 }

 static int spcp8x5_tiocmset(struct tty_struct *tty,
 			    unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	u8 control;

 	spin_lock_irqsave(&priv->lock, flags);
 	if (set & TIOCM_RTS)
 		priv->line_control |= MCR_RTS;
 	if (set & TIOCM_DTR)
 		priv->line_control |= MCR_DTR;
 	if (clear & TIOCM_RTS)
 		priv->line_control &= ~MCR_RTS;
 	if (clear & TIOCM_DTR)
 		priv->line_control &= ~MCR_DTR;
 	control = priv->line_control;
 	spin_unlock_irqrestore(&priv->lock, flags);

 	return spcp8x5_set_ctrl_line(port, control);
 }

 static int spcp8x5_tiocmget(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	unsigned int mcr;
 	u8 status;
 	unsigned int result;

 	result = spcp8x5_get_msr(port, &status);
 	if (result)
 		return result;

 	spin_lock_irqsave(&priv->lock, flags);
 	mcr = priv->line_control;
 	spin_unlock_irqrestore(&priv->lock, flags);

 	result = ((mcr & MCR_DTR)			? TIOCM_DTR : 0)
 		  | ((mcr & MCR_RTS)			? TIOCM_RTS : 0)
 		  | ((status & MSR_STATUS_LINE_CTS)	? TIOCM_CTS : 0)
 		  | ((status & MSR_STATUS_LINE_DSR)	? TIOCM_DSR : 0)
 		  | ((status & MSR_STATUS_LINE_RI)	? TIOCM_RI  : 0)
 		  | ((status & MSR_STATUS_LINE_DCD)	? TIOCM_CD  : 0);

 	return result;
 }

 static struct usb_serial_driver spcp8x5_device = {
 	.driver = {
 		.owner =	THIS_MODULE,
 		.name =		"SPCP8x5",
 	},
 	.id_table		= id_table,
 	.num_ports		= 1,
 	.open			= spcp8x5_open,
 	.dtr_rts		= spcp8x5_dtr_rts,
 	.carrier_raised		= spcp8x5_carrier_raised,
 	.set_termios		= spcp8x5_set_termios,
 	.init_termios		= spcp8x5_init_termios,
 	.tiocmget		= spcp8x5_tiocmget,
 	.tiocmset		= spcp8x5_tiocmset,
 	.probe			= spcp8x5_probe,
 	.port_probe		= spcp8x5_port_probe,
 	.port_remove		= spcp8x5_port_remove,
 };

 static struct usb_serial_driver * const serial_drivers[] = {
 	&spcp8x5_device, NULL
 };

 module_usb_serial_driver(serial_drivers, id_table);

 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
	/*
	* spcp8x5 USB to serial adaptor driver
	*
	* Copyright (C) 2010-2013 Johan Hovold ([email protected])
	* Copyright (C) 2006 Linxb ([email protected])
	* Copyright (C) 2006 S1 Corp.
	*
	* Original driver for 2.6.10 pl2303 driver by
	* Greg Kroah-Hartman ([email protected])
	* Changes for 2.6.20 by Harald Klein <[email protected]>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*/
	#include <linux/kernel.h>
	#include <linux/errno.h>
	#include <linux/slab.h>
	#include <linux/tty.h>
	#include <linux/tty_driver.h>
	#include <linux/tty_flip.h>
	#include <linux/module.h>
	#include <linux/spinlock.h>
	#include <linux/usb.h>
	#include <linux/usb/serial.h>

	#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver"

	#define SPCP825_QUIRK_NO_UART_STATUS 0x01
	#define SPCP825_QUIRK_NO_WORK_MODE 0x02

	#define SPCP8x5_007_VID 0x04FC
	#define SPCP8x5_007_PID 0x0201
	#define SPCP8x5_008_VID 0x04fc
	#define SPCP8x5_008_PID 0x0235
	#define SPCP8x5_PHILIPS_VID 0x0471
	#define SPCP8x5_PHILIPS_PID 0x081e
	#define SPCP8x5_INTERMATIC_VID 0x04FC
	#define SPCP8x5_INTERMATIC_PID 0x0204
	#define SPCP8x5_835_VID 0x04fc
	#define SPCP8x5_835_PID 0x0231

	static const struct usb_device_id id_table[] = {
	{ USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
	{ USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
	{ USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
	{ USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
	{ USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID),
	.driver_info = SPCP825_QUIRK_NO_UART_STATUS \|
	SPCP825_QUIRK_NO_WORK_MODE },
	{ } /* Terminating entry */
	};
	MODULE_DEVICE_TABLE(usb, id_table);

	struct spcp8x5_usb_ctrl_arg {
	u8 type;
	u8 cmd;
	u8 cmd_type;
	u16 value;
	u16 index;
	u16 length;
	};


	/* spcp8x5 spec register define */
	#define MCR_CONTROL_LINE_RTS 0x02
	#define MCR_CONTROL_LINE_DTR 0x01
	#define MCR_DTR 0x01
	#define MCR_RTS 0x02

	#define MSR_STATUS_LINE_DCD 0x80
	#define MSR_STATUS_LINE_RI 0x40
	#define MSR_STATUS_LINE_DSR 0x20
	#define MSR_STATUS_LINE_CTS 0x10

	/* verdor command here , we should define myself */
	#define SET_DEFAULT 0x40
	#define SET_DEFAULT_TYPE 0x20

	#define SET_UART_FORMAT 0x40
	#define SET_UART_FORMAT_TYPE 0x21
	#define SET_UART_FORMAT_SIZE_5 0x00
	#define SET_UART_FORMAT_SIZE_6 0x01
	#define SET_UART_FORMAT_SIZE_7 0x02
	#define SET_UART_FORMAT_SIZE_8 0x03
	#define SET_UART_FORMAT_STOP_1 0x00
	#define SET_UART_FORMAT_STOP_2 0x04
	#define SET_UART_FORMAT_PAR_NONE 0x00
	#define SET_UART_FORMAT_PAR_ODD 0x10
	#define SET_UART_FORMAT_PAR_EVEN 0x30
	#define SET_UART_FORMAT_PAR_MASK 0xD0
	#define SET_UART_FORMAT_PAR_SPACE 0x90

	#define GET_UART_STATUS_TYPE 0xc0
	#define GET_UART_STATUS 0x22
	#define GET_UART_STATUS_MSR 0x06

	#define SET_UART_STATUS 0x40
	#define SET_UART_STATUS_TYPE 0x23
	#define SET_UART_STATUS_MCR 0x0004
	#define SET_UART_STATUS_MCR_DTR 0x01
	#define SET_UART_STATUS_MCR_RTS 0x02
	#define SET_UART_STATUS_MCR_LOOP 0x10

	#define SET_WORKING_MODE 0x40
	#define SET_WORKING_MODE_TYPE 0x24
	#define SET_WORKING_MODE_U2C 0x00
	#define SET_WORKING_MODE_RS485 0x01
	#define SET_WORKING_MODE_PDMA 0x02
	#define SET_WORKING_MODE_SPP 0x03

	#define SET_FLOWCTL_CHAR 0x40
	#define SET_FLOWCTL_CHAR_TYPE 0x25

	#define GET_VERSION 0xc0
	#define GET_VERSION_TYPE 0x26

	#define SET_REGISTER 0x40
	#define SET_REGISTER_TYPE 0x27

	#define GET_REGISTER 0xc0
	#define GET_REGISTER_TYPE 0x28

	#define SET_RAM 0x40
	#define SET_RAM_TYPE 0x31

	#define GET_RAM 0xc0
	#define GET_RAM_TYPE 0x32

	/* how come ??? */
	#define UART_STATE 0x08
	#define UART_STATE_TRANSIENT_MASK 0x75
	#define UART_DCD 0x01
	#define UART_DSR 0x02
	#define UART_BREAK_ERROR 0x04
	#define UART_RING 0x08
	#define UART_FRAME_ERROR 0x10
	#define UART_PARITY_ERROR 0x20
	#define UART_OVERRUN_ERROR 0x40
	#define UART_CTS 0x80

	struct spcp8x5_private {
	unsigned quirks;
	spinlock_t lock;
	u8 line_control;
	};

	static int spcp8x5_probe(struct usb_serial *serial,
	const struct usb_device_id *id)
	{
	usb_set_serial_data(serial, (void *)id);

	return 0;
	}

	static int spcp8x5_port_probe(struct usb_serial_port *port)
	{
	const struct usb_device_id *id = usb_get_serial_data(port->serial);
	struct spcp8x5_private *priv;

	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
	if (!priv)
	return -ENOMEM;

	spin_lock_init(&priv->lock);
	priv->quirks = id->driver_info;

	usb_set_serial_port_data(port, priv);

	port->port.drain_delay = 256;

	return 0;
	}

	static int spcp8x5_port_remove(struct usb_serial_port *port)
	{
	struct spcp8x5_private *priv;

	priv = usb_get_serial_port_data(port);
	kfree(priv);

	return 0;
	}

	static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr)
	{
	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
	struct usb_device *dev = port->serial->dev;
	int retval;

	if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
	return -EPERM;

	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
	SET_UART_STATUS_TYPE, SET_UART_STATUS,
	mcr, 0x04, NULL, 0, 100);
	if (retval != 0) {
	dev_err(&port->dev, "failed to set control lines: %d\n",
	retval);
	}
	return retval;
	}

	static int spcp8x5_get_msr(struct usb_serial_port port, u8 status)
	{
	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
	struct usb_device *dev = port->serial->dev;
	u8 *buf;
	int ret;

	if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
	return -EPERM;

	buf = kzalloc(1, GFP_KERNEL);
	if (!buf)
	return -ENOMEM;

	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
	GET_UART_STATUS, GET_UART_STATUS_TYPE,
	0, GET_UART_STATUS_MSR, buf, 1, 100);
	if (ret < 0)
	dev_err(&port->dev, "failed to get modem status: %d\n", ret);

	dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x\n", ret, *buf);
	status = buf;
	kfree(buf);

	return ret;
	}

	static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value,
	u16 index)
	{
	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
	struct usb_device *dev = port->serial->dev;
	int ret;

	if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE)
	return;

	ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
	SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
	value, index, NULL, 0, 100);
	dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index);
	if (ret < 0)
	dev_err(&port->dev, "failed to set work mode: %d\n", ret);
	}

	static int spcp8x5_carrier_raised(struct usb_serial_port *port)
	{
	u8 msr;
	int ret;

	ret = spcp8x5_get_msr(port, &msr);
	if (ret \|\| msr & MSR_STATUS_LINE_DCD)
	return 1;

	return 0;
	}

	static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
	{
	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
	unsigned long flags;
	u8 control;

	spin_lock_irqsave(&priv->lock, flags);
	if (on)
	priv->line_control = MCR_CONTROL_LINE_DTR
	\| MCR_CONTROL_LINE_RTS;
	else
	priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
	\| MCR_CONTROL_LINE_RTS);
	control = priv->line_control;
	spin_unlock_irqrestore(&priv->lock, flags);
	spcp8x5_set_ctrl_line(port, control);
	}

	static void spcp8x5_init_termios(struct tty_struct *tty)
	{
	tty->termios = tty_std_termios;
	tty->termios.c_cflag = B115200 \| CS8 \| CREAD \| HUPCL \| CLOCAL;
	tty->termios.c_ispeed = 115200;
	tty->termios.c_ospeed = 115200;
	}

	static void spcp8x5_set_termios(struct tty_struct *tty,
	struct usb_serial_port port, struct ktermios old_termios)
	{
	struct usb_serial *serial = port->serial;
	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
	unsigned long flags;
	unsigned int cflag = tty->termios.c_cflag;
	unsigned short uartdata;
	unsigned char buf[2] = {0, 0};
	int baud;
	int i;
	u8 control;

	/* check that they really want us to change something */
	if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
	return;

	/* set DTR/RTS active */
	spin_lock_irqsave(&priv->lock, flags);
	control = priv->line_control;
	if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
	priv->line_control \|= MCR_DTR;
	if (!(old_termios->c_cflag & CRTSCTS))
	priv->line_control \|= MCR_RTS;
	}
	if (control != priv->line_control) {
	control = priv->line_control;
	spin_unlock_irqrestore(&priv->lock, flags);
	spcp8x5_set_ctrl_line(port, control);
	} else {
	spin_unlock_irqrestore(&priv->lock, flags);
	}

	/* Set Baud Rate */
	baud = tty_get_baud_rate(tty);
	switch (baud) {
	case 300: buf[0] = 0x00; break;
	case 600: buf[0] = 0x01; break;
	case 1200: buf[0] = 0x02; break;
	case 2400: buf[0] = 0x03; break;
	case 4800: buf[0] = 0x04; break;
	case 9600: buf[0] = 0x05; break;
	case 19200: buf[0] = 0x07; break;
	case 38400: buf[0] = 0x09; break;
	case 57600: buf[0] = 0x0a; break;
	case 115200: buf[0] = 0x0b; break;
	case 230400: buf[0] = 0x0c; break;
	case 460800: buf[0] = 0x0d; break;
	case 921600: buf[0] = 0x0e; break;
	/* case 1200000: buf[0] = 0x0f; break; */
	/* case 2400000: buf[0] = 0x10; break; */
	case 3000000: buf[0] = 0x11; break;
	/* case 6000000: buf[0] = 0x12; break; */
	case 0:
	case 1000000:
	buf[0] = 0x0b; break;
	default:
	dev_err(&port->dev, "unsupported baudrate, using 9600\n");
	}

	/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
	switch (cflag & CSIZE) {
	case CS5:
	buf[1] \|= SET_UART_FORMAT_SIZE_5;
	break;
	case CS6:
	buf[1] \|= SET_UART_FORMAT_SIZE_6;
	break;
	case CS7:
	buf[1] \|= SET_UART_FORMAT_SIZE_7;
	break;
	default:
	case CS8:
	buf[1] \|= SET_UART_FORMAT_SIZE_8;
	break;
	}

	/* Set Stop bit2 : 0:1bit 1:2bit */
	buf[1] \|= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 :
	SET_UART_FORMAT_STOP_1;

	/* Set Parity bit3-4 01:Odd 11:Even */
	if (cflag & PARENB) {
	buf[1] \|= (cflag & PARODD) ?
	SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
	} else {
	buf[1] \|= SET_UART_FORMAT_PAR_NONE;
	}
	uartdata = buf[0] \| buf[1]<<8;

	i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
	SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
	uartdata, 0, NULL, 0, 100);
	if (i < 0)
	dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
	uartdata, i);
	dev_dbg(&port->dev, "0x21:0x40:0:0 %d\n", i);

	if (cflag & CRTSCTS) {
	/* enable hardware flow control */
	spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C);
	}
	}

	static int spcp8x5_open(struct tty_struct tty, struct usb_serial_port port)
	{
	struct usb_serial *serial = port->serial;
	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
	int ret;

	usb_clear_halt(serial->dev, port->write_urb->pipe);
	usb_clear_halt(serial->dev, port->read_urb->pipe);

	ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
	0x09, 0x00,
	0x01, 0x00, NULL, 0x00, 100);
	if (ret)
	return ret;

	spcp8x5_set_ctrl_line(port, priv->line_control);

	if (tty)
	spcp8x5_set_termios(tty, port, NULL);

	return usb_serial_generic_open(tty, port);
	}

	static int spcp8x5_tiocmset(struct tty_struct *tty,
	unsigned int set, unsigned int clear)
	{
	struct usb_serial_port *port = tty->driver_data;
	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
	unsigned long flags;
	u8 control;

	spin_lock_irqsave(&priv->lock, flags);
	if (set & TIOCM_RTS)
	priv->line_control \|= MCR_RTS;
	if (set & TIOCM_DTR)
	priv->line_control \|= MCR_DTR;
	if (clear & TIOCM_RTS)
	priv->line_control &= ~MCR_RTS;
	if (clear & TIOCM_DTR)
	priv->line_control &= ~MCR_DTR;
	control = priv->line_control;
	spin_unlock_irqrestore(&priv->lock, flags);

	return spcp8x5_set_ctrl_line(port, control);
	}

	static int spcp8x5_tiocmget(struct tty_struct *tty)
	{
	struct usb_serial_port *port = tty->driver_data;
	struct spcp8x5_private *priv = usb_get_serial_port_data(port);
	unsigned long flags;
	unsigned int mcr;
	u8 status;
	unsigned int result;

	result = spcp8x5_get_msr(port, &status);
	if (result)
	return result;

	spin_lock_irqsave(&priv->lock, flags);
	mcr = priv->line_control;
	spin_unlock_irqrestore(&priv->lock, flags);

	result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
	\| ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
	\| ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0)
	\| ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0)
	\| ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0)
	\| ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0);

	return result;
	}

	static struct usb_serial_driver spcp8x5_device = {
	.driver = {
	.owner = THIS_MODULE,
	.name = "SPCP8x5",
	},
	.id_table = id_table,
	.num_ports = 1,
	.open = spcp8x5_open,
	.dtr_rts = spcp8x5_dtr_rts,
	.carrier_raised = spcp8x5_carrier_raised,
	.set_termios = spcp8x5_set_termios,
	.init_termios = spcp8x5_init_termios,
	.tiocmget = spcp8x5_tiocmget,
	.tiocmset = spcp8x5_tiocmset,
	.probe = spcp8x5_probe,
	.port_probe = spcp8x5_port_probe,
	.port_remove = spcp8x5_port_remove,
	};

	static struct usb_serial_driver * const serial_drivers[] = {
	&spcp8x5_device, NULL
	};

	module_usb_serial_driver(serial_drivers, id_table);

	MODULE_DESCRIPTION(DRIVER_DESC);
	MODULE_LICENSE("GPL");