arch/arm/boot/dts/kirkwood-l-50.dts - kernel/common - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 /*
  * Check Point L-50 Board Description
  * Copyright 2020 Pawel Dembicki <[email protected]>
  */

 /dts-v1/;

 #include "kirkwood.dtsi"
 #include "kirkwood-6281.dtsi"

 / {
 	model = "Check Point L-50";
 	compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood";

 	memory {
 		device_type = "memory";
 		reg = <0x00000000 0x20000000>;
 	};

 	chosen {
 		bootargs = "console=ttyS0,115200n8";
 		stdout-path = &uart0;
 	};

 	ocp@f1000000 {
 		pinctrl: pin-controller@10000 {
 			pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>;
 			pinctrl-names = "default";

 			pmx_sysrst: pmx-sysrst {
 				marvell,pins = "mpp6";
 				marvell,function = "sysrst";
 			};

 			pmx_button29: pmx_button29 {
 				marvell,pins = "mpp29";
 				marvell,function = "gpio";
 			};

 			pmx_led38: pmx_led38 {
 				marvell,pins = "mpp38";
 				marvell,function = "gpio";
 			};

 			pmx_sdio_cd: pmx-sdio-cd {
 				marvell,pins = "mpp46";
 				marvell,function = "gpio";
 			};
 		};

 		serial@12000 {
 			status = "okay";
 		};

 		mvsdio@90000 {
 			status = "okay";
 			cd-gpios = <&gpio1 14 9>;
 		};

 		i2c@11000 {
 			status = "okay";
 			clock-frequency = <400000>;

 			gpio2: gpio-expander@20{
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
 				compatible = "semtech,sx1505q";
 				reg = <0x20>;

 				gpio-controller;
 			};

 			/* Three GPIOs from 0x21 exp. are undescribed in dts:
 			 * 1: DSL module reset (active low)
 			 * 5: mPCIE reset (active low)
 			 * 6: Express card reset (active low)
 			 */
 			gpio3: gpio-expander@21{
 				#gpio-cells = <2>;
 				#interrupt-cells = <2>;
 				compatible = "semtech,sx1505q";
 				reg = <0x21>;

 				gpio-controller;
 			};

 			rtc@30 {
 				compatible = "s35390a";
 				reg = <0x30>;
 			};
 		};
 	};

 	leds {
 		compatible = "gpio-leds";

 		status_green {
 			label = "l-50:green:status";
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 		};

 		status_red {
 			label = "l-50:red:status";
 			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
 		};

 		wifi {
 			label = "l-50:green:wifi";
 			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "phy0tpt";
 		};

 		internet_green {
 			label = "l-50:green:internet";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 		};

 		internet_red {
 			label = "l-50:red:internet";
 			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 		};

 		usb1_green {
 			label = "l-50:green:usb1";
 			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "usbport";
 			trigger-sources = <&hub_port3>;
 		};

 		usb1_red {
 			label = "l-50:red:usb1";
 			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 		};

 		usb2_green {
 			label = "l-50:green:usb2";
 			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "usbport";
 			trigger-sources = <&hub_port1>;
 		};

 		usb2_red {
 			label = "l-50:red:usb2";
 			gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
 		};
 	};

 	usb2_pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "usb2_pwr";

 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
 		regulator-always-on;
 	};

 	usb1_pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "usb1_pwr";

 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
 		regulator-always-on;
 	};

 	mpcie_pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "mpcie_pwr";

 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-always-on;
 	};

 	express_card_pwr {
 		compatible = "regulator-fixed";
 		regulator-name = "express_card_pwr";

 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-always-on;
 	};

 	keys {
 		compatible = "gpio-keys";

 		factory_defaults {
 			label = "factory_defaults";
 			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
 		};
 	};
 };

 &mdio {
 	status = "okay";

 	ethphy8: ethernet-phy@8 {
 		reg = <0x08>;
 	};

 	switch0: switch@10 {
 		compatible = "marvell,mv88e6085";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x10>;
 		dsa,member = <0 0>;

 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			port@0 {
 				reg = <0>;
 				label = "lan5";
 			};

 			port@1 {
 			       reg = <1>;
 			       label = "lan1";
 			};

 			port@2 {
 			       reg = <2>;
 			       label = "lan6";
 			};

 			port@3 {
 			       reg = <3>;
 			       label = "lan2";
 			};

 			port@4 {
 				reg = <4>;
 				label = "lan7";
 			};

 			switch0port5: port@5 {
 				reg = <5>;
 				phy-mode = "rgmii-txid";
 				link = <&switch1port5>;
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
 				};
 			};

 			port@6 {
 				reg = <6>;
 				label = "cpu";
 				phy-mode = "rgmii-id";
 				ethernet = <&eth1port>;
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
 				};
 			};
 		};
 	};

 	switch@11 {
 		compatible = "marvell,mv88e6085";
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x11>;
 		dsa,member = <0 1>;

 		ports {
 			#address-cells = <1>;
 			#size-cells = <0>;

 			port@0 {
 				reg = <0>;
 				label = "lan3";
 			};

 			port@1 {
 			       reg = <1>;
 			       label = "lan8";
 			};

 			port@2 {
 			       reg = <2>;
 			       label = "lan4";
 			};

 			port@3 {
 			       reg = <3>;
 			       label = "dmz";
 			};

 			switch1port5: port@5 {
 				reg = <5>;
 				phy-mode = "rgmii-txid";
 				link = <&switch0port5>;
 				fixed-link {
 					speed = <1000>;
 					full-duplex;
 				};
 			};

 			port@6 {
 				reg = <6>;
 				label = "dsl";
 				fixed-link {
 					speed = <100>;
 					full-duplex;
 				};
 			};
 		};
 	};
 };

 &eth0 {
 	status = "okay";
 	ethernet0-port@0 {
 		phy-handle = <&ethphy8>;
 	};
 };

 &eth1 {
 	status = "okay";
 	ethernet1-port@0 {
 		speed = <1000>;
 		duplex = <1>;
 	};
 };

 &nand {
 	status = "okay";
 	pinctrl-0 = <&pmx_nand>;
 	pinctrl-names = "default";

 	partition@0 {
 		label = "u-boot";
 		reg = <0x00000000 0x000c0000>;
 	};

 	partition@a0000 {
 		label = "bootldr-env";
 		reg = <0x000c0000 0x00040000>;
 	};

 	partition@100000 {
 		label = "kernel-1";
 		reg = <0x00100000 0x00800000>;
 	};

 	partition@900000 {
 		label = "rootfs-1";
 		reg = <0x00900000 0x07100000>;
 	};

 	partition@7a00000 {
 		label = "kernel-2";
 		reg = <0x07a00000 0x00800000>;
 	};

 	partition@8200000 {
 		label = "rootfs-2";
 		reg = <0x08200000 0x07100000>;
 	};

 	partition@f300000 {
 		label = "default_sw";
 		reg = <0x0f300000 0x07900000>;
 	};

 	partition@16c00000 {
 		label = "logs";
 		reg = <0x16c00000 0x01800000>;
 	};

 	partition@18400000 {
 		label = "preset_cfg";
 		reg = <0x18400000 0x00100000>;
 	};

 	partition@18500000 {
 		label = "adsl";
 		reg = <0x18500000 0x00100000>;
 	};

 	partition@18600000 {
 		label = "storage";
 		reg = <0x18600000 0x07a00000>;
 	};
 };

 &rtc {
 	status = "disabled";
 };

 &pciec {
 	status = "okay";
 };

 &pcie0 {
 	status = "okay";
 };

 &sata_phy0 {
 	status = "disabled";
 };

 &sata_phy1 {
 	status = "disabled";
 };

 &usb0 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	status = "okay";

 	port@1 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <1>;
 		#trigger-source-cells = <0>;

 		hub_port1: port@1 {
 			reg = <1>;
 			#trigger-source-cells = <0>;
 		};

 		hub_port3: port@3 {
 			reg = <3>;
 			#trigger-source-cells = <0>;
 		};
 	};
 };
	// SPDX-License-Identifier: GPL-2.0
	/*
	* Check Point L-50 Board Description
	* Copyright 2020 Pawel Dembicki <[email protected]>
	*/

	/dts-v1/;

	#include "kirkwood.dtsi"
	#include "kirkwood-6281.dtsi"

	/ {
	model = "Check Point L-50";
	compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood";

	memory {
	device_type = "memory";
	reg = <0x00000000 0x20000000>;
	};

	chosen {
	bootargs = "console=ttyS0,115200n8";
	stdout-path = &uart0;
	};

	ocp@f1000000 {
	pinctrl: pin-controller@10000 {
	pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>;
	pinctrl-names = "default";

	pmx_sysrst: pmx-sysrst {
	marvell,pins = "mpp6";
	marvell,function = "sysrst";
	};

	pmx_button29: pmx_button29 {
	marvell,pins = "mpp29";
	marvell,function = "gpio";
	};

	pmx_led38: pmx_led38 {
	marvell,pins = "mpp38";
	marvell,function = "gpio";
	};

	pmx_sdio_cd: pmx-sdio-cd {
	marvell,pins = "mpp46";
	marvell,function = "gpio";
	};
	};

	serial@12000 {
	status = "okay";
	};

	mvsdio@90000 {
	status = "okay";
	cd-gpios = <&gpio1 14 9>;
	};

	i2c@11000 {
	status = "okay";
	clock-frequency = <400000>;

	gpio2: gpio-expander@20{
	#gpio-cells = <2>;
	#interrupt-cells = <2>;
	compatible = "semtech,sx1505q";
	reg = <0x20>;

	gpio-controller;
	};

	/* Three GPIOs from 0x21 exp. are undescribed in dts:
	* 1: DSL module reset (active low)
	* 5: mPCIE reset (active low)
	* 6: Express card reset (active low)
	*/
	gpio3: gpio-expander@21{
	#gpio-cells = <2>;
	#interrupt-cells = <2>;
	compatible = "semtech,sx1505q";
	reg = <0x21>;

	gpio-controller;
	};

	rtc@30 {
	compatible = "s35390a";
	reg = <0x30>;
	};
	};
	};

	leds {
	compatible = "gpio-leds";

	status_green {
	label = "l-50:green:status";
	gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
	};

	status_red {
	label = "l-50:red:status";
	gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
	};

	wifi {
	label = "l-50:green:wifi";
	gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
	linux,default-trigger = "phy0tpt";
	};

	internet_green {
	label = "l-50:green:internet";
	gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
	};

	internet_red {
	label = "l-50:red:internet";
	gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
	};

	usb1_green {
	label = "l-50:green:usb1";
	gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
	linux,default-trigger = "usbport";
	trigger-sources = <&hub_port3>;
	};

	usb1_red {
	label = "l-50:red:usb1";
	gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
	};

	usb2_green {
	label = "l-50:green:usb2";
	gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
	linux,default-trigger = "usbport";
	trigger-sources = <&hub_port1>;
	};

	usb2_red {
	label = "l-50:red:usb2";
	gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
	};
	};

	usb2_pwr {
	compatible = "regulator-fixed";
	regulator-name = "usb2_pwr";

	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
	regulator-always-on;
	};

	usb1_pwr {
	compatible = "regulator-fixed";
	regulator-name = "usb1_pwr";

	regulator-min-microvolt = <5000000>;
	regulator-max-microvolt = <5000000>;
	gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
	regulator-always-on;
	};

	mpcie_pwr {
	compatible = "regulator-fixed";
	regulator-name = "mpcie_pwr";

	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
	enable-active-high;
	regulator-always-on;
	};

	express_card_pwr {
	compatible = "regulator-fixed";
	regulator-name = "express_card_pwr";

	regulator-min-microvolt = <3300000>;
	regulator-max-microvolt = <3300000>;
	gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
	enable-active-high;
	regulator-always-on;
	};

	keys {
	compatible = "gpio-keys";

	factory_defaults {
	label = "factory_defaults";
	gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
	linux,code = <KEY_RESTART>;
	};
	};
	};

	&mdio {
	status = "okay";

	ethphy8: ethernet-phy@8 {
	reg = <0x08>;
	};

	switch0: switch@10 {
	compatible = "marvell,mv88e6085";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x10>;
	dsa,member = <0 0>;

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	port@0 {
	reg = <0>;
	label = "lan5";
	};

	port@1 {
	reg = <1>;
	label = "lan1";
	};

	port@2 {
	reg = <2>;
	label = "lan6";
	};

	port@3 {
	reg = <3>;
	label = "lan2";
	};

	port@4 {
	reg = <4>;
	label = "lan7";
	};

	switch0port5: port@5 {
	reg = <5>;
	phy-mode = "rgmii-txid";
	link = <&switch1port5>;
	fixed-link {
	speed = <1000>;
	full-duplex;
	};
	};

	port@6 {
	reg = <6>;
	label = "cpu";
	phy-mode = "rgmii-id";
	ethernet = <&eth1port>;
	fixed-link {
	speed = <1000>;
	full-duplex;
	};
	};
	};
	};

	switch@11 {
	compatible = "marvell,mv88e6085";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x11>;
	dsa,member = <0 1>;

	ports {
	#address-cells = <1>;
	#size-cells = <0>;

	port@0 {
	reg = <0>;
	label = "lan3";
	};

	port@1 {
	reg = <1>;
	label = "lan8";
	};

	port@2 {
	reg = <2>;
	label = "lan4";
	};

	port@3 {
	reg = <3>;
	label = "dmz";
	};

	switch1port5: port@5 {
	reg = <5>;
	phy-mode = "rgmii-txid";
	link = <&switch0port5>;
	fixed-link {
	speed = <1000>;
	full-duplex;
	};
	};

	port@6 {
	reg = <6>;
	label = "dsl";
	fixed-link {
	speed = <100>;
	full-duplex;
	};
	};
	};
	};
	};

	&eth0 {
	status = "okay";
	ethernet0-port@0 {
	phy-handle = <&ethphy8>;
	};
	};

	&eth1 {
	status = "okay";
	ethernet1-port@0 {
	speed = <1000>;
	duplex = <1>;
	};
	};

	&nand {
	status = "okay";
	pinctrl-0 = <&pmx_nand>;
	pinctrl-names = "default";

	partition@0 {
	label = "u-boot";
	reg = <0x00000000 0x000c0000>;
	};

	partition@a0000 {
	label = "bootldr-env";
	reg = <0x000c0000 0x00040000>;
	};

	partition@100000 {
	label = "kernel-1";
	reg = <0x00100000 0x00800000>;
	};

	partition@900000 {
	label = "rootfs-1";
	reg = <0x00900000 0x07100000>;
	};

	partition@7a00000 {
	label = "kernel-2";
	reg = <0x07a00000 0x00800000>;
	};

	partition@8200000 {
	label = "rootfs-2";
	reg = <0x08200000 0x07100000>;
	};

	partition@f300000 {
	label = "default_sw";
	reg = <0x0f300000 0x07900000>;
	};

	partition@16c00000 {
	label = "logs";
	reg = <0x16c00000 0x01800000>;
	};

	partition@18400000 {
	label = "preset_cfg";
	reg = <0x18400000 0x00100000>;
	};

	partition@18500000 {
	label = "adsl";
	reg = <0x18500000 0x00100000>;
	};

	partition@18600000 {
	label = "storage";
	reg = <0x18600000 0x07a00000>;
	};
	};

	&rtc {
	status = "disabled";
	};

	&pciec {
	status = "okay";
	};

	&pcie0 {
	status = "okay";
	};

	&sata_phy0 {
	status = "disabled";
	};

	&sata_phy1 {
	status = "disabled";
	};

	&usb0 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";

	port@1 {
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <1>;
	#trigger-source-cells = <0>;

	hub_port1: port@1 {
	reg = <1>;
	#trigger-source-cells = <0>;
	};

	hub_port3: port@3 {
	reg = <3>;
	#trigger-source-cells = <0>;
	};
	};
	};