| #include <linux/types.h> | 
 | #include <linux/mm.h> | 
 | #include <linux/blkdev.h> | 
 | #include <linux/init.h> | 
 | #include <linux/interrupt.h> | 
 |  | 
 | #include <asm/setup.h> | 
 | #include <asm/page.h> | 
 | #include <asm/pgtable.h> | 
 | #include <asm/amigaints.h> | 
 | #include <asm/amigahw.h> | 
 | #include <linux/zorro.h> | 
 | #include <asm/irq.h> | 
 | #include <linux/spinlock.h> | 
 |  | 
 | #include "scsi.h" | 
 | #include <scsi/scsi_host.h> | 
 | #include "wd33c93.h" | 
 | #include "a2091.h" | 
 |  | 
 | #include<linux/stat.h> | 
 |  | 
 | #define DMA(ptr) ((a2091_scsiregs *)((ptr)->base)) | 
 | #define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata)) | 
 |  | 
 | static irqreturn_t a2091_intr (int irq, void *_instance) | 
 | { | 
 |     unsigned long flags; | 
 |     unsigned int status; | 
 |     struct Scsi_Host *instance = (struct Scsi_Host *)_instance; | 
 |  | 
 |     status = DMA(instance)->ISTR; | 
 |     if (!(status & (ISTR_INT_F|ISTR_INT_P)) || !(status & ISTR_INTS)) | 
 | 	return IRQ_NONE; | 
 |  | 
 |     spin_lock_irqsave(instance->host_lock, flags); | 
 |     wd33c93_intr(instance); | 
 |     spin_unlock_irqrestore(instance->host_lock, flags); | 
 |     return IRQ_HANDLED; | 
 | } | 
 |  | 
 | static int dma_setup(struct scsi_cmnd *cmd, int dir_in) | 
 | { | 
 |     unsigned short cntr = CNTR_PDMD | CNTR_INTEN; | 
 |     unsigned long addr = virt_to_bus(cmd->SCp.ptr); | 
 |     struct Scsi_Host *instance = cmd->device->host; | 
 |  | 
 |     /* don't allow DMA if the physical address is bad */ | 
 |     if (addr & A2091_XFER_MASK) | 
 |     { | 
 | 	HDATA(instance)->dma_bounce_len = (cmd->SCp.this_residual + 511) | 
 | 	    & ~0x1ff; | 
 | 	HDATA(instance)->dma_bounce_buffer = | 
 | 	    kmalloc (HDATA(instance)->dma_bounce_len, GFP_KERNEL); | 
 | 	 | 
 | 	/* can't allocate memory; use PIO */ | 
 | 	if (!HDATA(instance)->dma_bounce_buffer) { | 
 | 	    HDATA(instance)->dma_bounce_len = 0; | 
 | 	    return 1; | 
 | 	} | 
 |  | 
 | 	/* get the physical address of the bounce buffer */ | 
 | 	addr = virt_to_bus(HDATA(instance)->dma_bounce_buffer); | 
 |  | 
 | 	/* the bounce buffer may not be in the first 16M of physmem */ | 
 | 	if (addr & A2091_XFER_MASK) { | 
 | 	    /* we could use chipmem... maybe later */ | 
 | 	    kfree (HDATA(instance)->dma_bounce_buffer); | 
 | 	    HDATA(instance)->dma_bounce_buffer = NULL; | 
 | 	    HDATA(instance)->dma_bounce_len = 0; | 
 | 	    return 1; | 
 | 	} | 
 |  | 
 | 	if (!dir_in) { | 
 | 		/* copy to bounce buffer for a write */ | 
 | 		memcpy (HDATA(instance)->dma_bounce_buffer, | 
 | 			cmd->SCp.ptr, cmd->SCp.this_residual); | 
 | 	} | 
 |     } | 
 |  | 
 |     /* setup dma direction */ | 
 |     if (!dir_in) | 
 | 	cntr |= CNTR_DDIR; | 
 |  | 
 |     /* remember direction */ | 
 |     HDATA(cmd->device->host)->dma_dir = dir_in; | 
 |  | 
 |     DMA(cmd->device->host)->CNTR = cntr; | 
 |  | 
 |     /* setup DMA *physical* address */ | 
 |     DMA(cmd->device->host)->ACR = addr; | 
 |  | 
 |     if (dir_in){ | 
 | 	/* invalidate any cache */ | 
 | 	cache_clear (addr, cmd->SCp.this_residual); | 
 |     }else{ | 
 | 	/* push any dirty cache */ | 
 | 	cache_push (addr, cmd->SCp.this_residual); | 
 |       } | 
 |     /* start DMA */ | 
 |     DMA(cmd->device->host)->ST_DMA = 1; | 
 |  | 
 |     /* return success */ | 
 |     return 0; | 
 | } | 
 |  | 
 | static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt, | 
 | 		      int status) | 
 | { | 
 |     /* disable SCSI interrupts */ | 
 |     unsigned short cntr = CNTR_PDMD; | 
 |  | 
 |     if (!HDATA(instance)->dma_dir) | 
 | 	    cntr |= CNTR_DDIR; | 
 |  | 
 |     /* disable SCSI interrupts */ | 
 |     DMA(instance)->CNTR = cntr; | 
 |  | 
 |     /* flush if we were reading */ | 
 |     if (HDATA(instance)->dma_dir) { | 
 | 	DMA(instance)->FLUSH = 1; | 
 | 	while (!(DMA(instance)->ISTR & ISTR_FE_FLG)) | 
 | 	    ; | 
 |     } | 
 |  | 
 |     /* clear a possible interrupt */ | 
 |     DMA(instance)->CINT = 1; | 
 |  | 
 |     /* stop DMA */ | 
 |     DMA(instance)->SP_DMA = 1; | 
 |  | 
 |     /* restore the CONTROL bits (minus the direction flag) */ | 
 |     DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; | 
 |  | 
 |     /* copy from a bounce buffer, if necessary */ | 
 |     if (status && HDATA(instance)->dma_bounce_buffer) { | 
 | 	if( HDATA(instance)->dma_dir ) | 
 | 		memcpy (SCpnt->SCp.ptr,  | 
 | 			HDATA(instance)->dma_bounce_buffer, | 
 | 			SCpnt->SCp.this_residual); | 
 | 	kfree (HDATA(instance)->dma_bounce_buffer); | 
 | 	HDATA(instance)->dma_bounce_buffer = NULL; | 
 | 	HDATA(instance)->dma_bounce_len = 0; | 
 |     } | 
 | } | 
 |  | 
 | int __init a2091_detect(struct scsi_host_template *tpnt) | 
 | { | 
 |     static unsigned char called = 0; | 
 |     struct Scsi_Host *instance; | 
 |     unsigned long address; | 
 |     struct zorro_dev *z = NULL; | 
 |     wd33c93_regs regs; | 
 |     int num_a2091 = 0; | 
 |  | 
 |     if (!MACH_IS_AMIGA || called) | 
 | 	return 0; | 
 |     called = 1; | 
 |  | 
 |     tpnt->proc_name = "A2091"; | 
 |     tpnt->proc_info = &wd33c93_proc_info; | 
 |  | 
 |     while ((z = zorro_find_device(ZORRO_WILDCARD, z))) { | 
 | 	if (z->id != ZORRO_PROD_CBM_A590_A2091_1 && | 
 | 	    z->id != ZORRO_PROD_CBM_A590_A2091_2) | 
 | 	    continue; | 
 | 	address = z->resource.start; | 
 | 	if (!request_mem_region(address, 256, "wd33c93")) | 
 | 	    continue; | 
 |  | 
 | 	instance = scsi_register (tpnt, sizeof (struct WD33C93_hostdata)); | 
 | 	if (instance == NULL) { | 
 | 	    release_mem_region(address, 256); | 
 | 	    continue; | 
 | 	} | 
 | 	instance->base = ZTWO_VADDR(address); | 
 | 	instance->irq = IRQ_AMIGA_PORTS; | 
 | 	instance->unique_id = z->slotaddr; | 
 | 	DMA(instance)->DAWR = DAWR_A2091; | 
 | 	regs.SASR = &(DMA(instance)->SASR); | 
 | 	regs.SCMD = &(DMA(instance)->SCMD); | 
 | 	HDATA(instance)->no_sync = 0xff; | 
 | 	HDATA(instance)->fast = 0; | 
 | 	HDATA(instance)->dma_mode = CTRL_DMA; | 
 | 	wd33c93_init(instance, regs, dma_setup, dma_stop, WD33C93_FS_8_10); | 
 | 	request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED, "A2091 SCSI", | 
 | 		    instance); | 
 | 	DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN; | 
 | 	num_a2091++; | 
 |     } | 
 |  | 
 |     return num_a2091; | 
 | } | 
 |  | 
 | static int a2091_bus_reset(struct scsi_cmnd *cmd) | 
 | { | 
 | 	/* FIXME perform bus-specific reset */ | 
 |  | 
 | 	/* FIXME 2: kill this function, and let midlayer fall back | 
 | 	   to the same action, calling wd33c93_host_reset() */ | 
 |  | 
 | 	spin_lock_irq(cmd->device->host->host_lock); | 
 | 	wd33c93_host_reset(cmd); | 
 | 	spin_unlock_irq(cmd->device->host->host_lock); | 
 |  | 
 | 	return SUCCESS; | 
 | } | 
 |  | 
 | #define HOSTS_C | 
 |  | 
 | static struct scsi_host_template driver_template = { | 
 | 	.proc_name		= "A2901", | 
 | 	.name			= "Commodore A2091/A590 SCSI", | 
 | 	.detect			= a2091_detect, | 
 | 	.release		= a2091_release, | 
 | 	.queuecommand		= wd33c93_queuecommand, | 
 | 	.eh_abort_handler	= wd33c93_abort, | 
 | 	.eh_bus_reset_handler	= a2091_bus_reset, | 
 | 	.eh_host_reset_handler	= wd33c93_host_reset, | 
 | 	.can_queue		= CAN_QUEUE, | 
 | 	.this_id		= 7, | 
 | 	.sg_tablesize		= SG_ALL, | 
 | 	.cmd_per_lun		= CMD_PER_LUN, | 
 | 	.use_clustering		= DISABLE_CLUSTERING | 
 | }; | 
 |  | 
 |  | 
 | #include "scsi_module.c" | 
 |  | 
 | int a2091_release(struct Scsi_Host *instance) | 
 | { | 
 | #ifdef MODULE | 
 | 	DMA(instance)->CNTR = 0; | 
 | 	release_mem_region(ZTWO_PADDR(instance->base), 256); | 
 | 	free_irq(IRQ_AMIGA_PORTS, instance); | 
 | 	wd33c93_release(); | 
 | #endif | 
 | 	return 1; | 
 | } | 
 |  | 
 | MODULE_LICENSE("GPL"); |