|  | /* | 
|  | * Copyright(c) 2007 - 2008 Intel Corporation. All rights reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms and conditions of the GNU General Public License, | 
|  | * version 2, as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along with | 
|  | * this program; if not, write to the Free Software Foundation, Inc., | 
|  | * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | 
|  | * | 
|  | * Maintained at www.Open-FCoE.org | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * RPORT GENERAL INFO | 
|  | * | 
|  | * This file contains all processing regarding fc_rports. It contains the | 
|  | * rport state machine and does all rport interaction with the transport class. | 
|  | * There should be no other places in libfc that interact directly with the | 
|  | * transport class in regards to adding and deleting rports. | 
|  | * | 
|  | * fc_rport's represent N_Port's within the fabric. | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * RPORT LOCKING | 
|  | * | 
|  | * The rport should never hold the rport mutex and then attempt to acquire | 
|  | * either the lport or disc mutexes. The rport's mutex is considered lesser | 
|  | * than both the lport's mutex and the disc mutex. Refer to fc_lport.c for | 
|  | * more comments on the hierarchy. | 
|  | * | 
|  | * The locking strategy is similar to the lport's strategy. The lock protects | 
|  | * the rport's states and is held and released by the entry points to the rport | 
|  | * block. All _enter_* functions correspond to rport states and expect the rport | 
|  | * mutex to be locked before calling them. This means that rports only handle | 
|  | * one request or response at a time, since they're not critical for the I/O | 
|  | * path this potential over-use of the mutex is acceptable. | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/rcupdate.h> | 
|  | #include <linux/timer.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/export.h> | 
|  | #include <asm/unaligned.h> | 
|  |  | 
|  | #include <scsi/libfc.h> | 
|  | #include <scsi/fc_encode.h> | 
|  |  | 
|  | #include "fc_libfc.h" | 
|  |  | 
|  | static struct workqueue_struct *rport_event_queue; | 
|  |  | 
|  | static void fc_rport_enter_flogi(struct fc_rport_priv *); | 
|  | static void fc_rport_enter_plogi(struct fc_rport_priv *); | 
|  | static void fc_rport_enter_prli(struct fc_rport_priv *); | 
|  | static void fc_rport_enter_rtv(struct fc_rport_priv *); | 
|  | static void fc_rport_enter_ready(struct fc_rport_priv *); | 
|  | static void fc_rport_enter_logo(struct fc_rport_priv *); | 
|  | static void fc_rport_enter_adisc(struct fc_rport_priv *); | 
|  |  | 
|  | static void fc_rport_recv_plogi_req(struct fc_lport *, struct fc_frame *); | 
|  | static void fc_rport_recv_prli_req(struct fc_rport_priv *, struct fc_frame *); | 
|  | static void fc_rport_recv_prlo_req(struct fc_rport_priv *, struct fc_frame *); | 
|  | static void fc_rport_recv_logo_req(struct fc_lport *, struct fc_frame *); | 
|  | static void fc_rport_timeout(struct work_struct *); | 
|  | static void fc_rport_error(struct fc_rport_priv *, struct fc_frame *); | 
|  | static void fc_rport_error_retry(struct fc_rport_priv *, struct fc_frame *); | 
|  | static void fc_rport_work(struct work_struct *); | 
|  |  | 
|  | static const char *fc_rport_state_names[] = { | 
|  | [RPORT_ST_INIT] = "Init", | 
|  | [RPORT_ST_FLOGI] = "FLOGI", | 
|  | [RPORT_ST_PLOGI_WAIT] = "PLOGI_WAIT", | 
|  | [RPORT_ST_PLOGI] = "PLOGI", | 
|  | [RPORT_ST_PRLI] = "PRLI", | 
|  | [RPORT_ST_RTV] = "RTV", | 
|  | [RPORT_ST_READY] = "Ready", | 
|  | [RPORT_ST_ADISC] = "ADISC", | 
|  | [RPORT_ST_DELETE] = "Delete", | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * fc_rport_lookup() - Lookup a remote port by port_id | 
|  | * @lport:   The local port to lookup the remote port on | 
|  | * @port_id: The remote port ID to look up | 
|  | * | 
|  | * The caller must hold either disc_mutex or rcu_read_lock(). | 
|  | */ | 
|  | static struct fc_rport_priv *fc_rport_lookup(const struct fc_lport *lport, | 
|  | u32 port_id) | 
|  | { | 
|  | struct fc_rport_priv *rdata; | 
|  |  | 
|  | list_for_each_entry_rcu(rdata, &lport->disc.rports, peers) | 
|  | if (rdata->ids.port_id == port_id) | 
|  | return rdata; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_create() - Create a new remote port | 
|  | * @lport: The local port this remote port will be associated with | 
|  | * @ids:   The identifiers for the new remote port | 
|  | * | 
|  | * The remote port will start in the INIT state. | 
|  | * | 
|  | * Locking note:  must be called with the disc_mutex held. | 
|  | */ | 
|  | static struct fc_rport_priv *fc_rport_create(struct fc_lport *lport, | 
|  | u32 port_id) | 
|  | { | 
|  | struct fc_rport_priv *rdata; | 
|  |  | 
|  | rdata = lport->tt.rport_lookup(lport, port_id); | 
|  | if (rdata) | 
|  | return rdata; | 
|  |  | 
|  | rdata = kzalloc(sizeof(*rdata) + lport->rport_priv_size, GFP_KERNEL); | 
|  | if (!rdata) | 
|  | return NULL; | 
|  |  | 
|  | rdata->ids.node_name = -1; | 
|  | rdata->ids.port_name = -1; | 
|  | rdata->ids.port_id = port_id; | 
|  | rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN; | 
|  |  | 
|  | kref_init(&rdata->kref); | 
|  | mutex_init(&rdata->rp_mutex); | 
|  | rdata->local_port = lport; | 
|  | rdata->rp_state = RPORT_ST_INIT; | 
|  | rdata->event = RPORT_EV_NONE; | 
|  | rdata->flags = FC_RP_FLAGS_REC_SUPPORTED; | 
|  | rdata->e_d_tov = lport->e_d_tov; | 
|  | rdata->r_a_tov = lport->r_a_tov; | 
|  | rdata->maxframe_size = FC_MIN_MAX_PAYLOAD; | 
|  | INIT_DELAYED_WORK(&rdata->retry_work, fc_rport_timeout); | 
|  | INIT_WORK(&rdata->event_work, fc_rport_work); | 
|  | if (port_id != FC_FID_DIR_SERV) { | 
|  | rdata->lld_event_callback = lport->tt.rport_event_callback; | 
|  | list_add_rcu(&rdata->peers, &lport->disc.rports); | 
|  | } | 
|  | return rdata; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_destroy() - Free a remote port after last reference is released | 
|  | * @kref: The remote port's kref | 
|  | */ | 
|  | static void fc_rport_destroy(struct kref *kref) | 
|  | { | 
|  | struct fc_rport_priv *rdata; | 
|  |  | 
|  | rdata = container_of(kref, struct fc_rport_priv, kref); | 
|  | kfree_rcu(rdata, rcu); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_state() - Return a string identifying the remote port's state | 
|  | * @rdata: The remote port | 
|  | */ | 
|  | static const char *fc_rport_state(struct fc_rport_priv *rdata) | 
|  | { | 
|  | const char *cp; | 
|  |  | 
|  | cp = fc_rport_state_names[rdata->rp_state]; | 
|  | if (!cp) | 
|  | cp = "Unknown"; | 
|  | return cp; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_set_rport_loss_tmo() - Set the remote port loss timeout | 
|  | * @rport:   The remote port that gets a new timeout value | 
|  | * @timeout: The new timeout value (in seconds) | 
|  | */ | 
|  | void fc_set_rport_loss_tmo(struct fc_rport *rport, u32 timeout) | 
|  | { | 
|  | if (timeout) | 
|  | rport->dev_loss_tmo = timeout; | 
|  | else | 
|  | rport->dev_loss_tmo = 1; | 
|  | } | 
|  | EXPORT_SYMBOL(fc_set_rport_loss_tmo); | 
|  |  | 
|  | /** | 
|  | * fc_plogi_get_maxframe() - Get the maximum payload from the common service | 
|  | *			     parameters in a FLOGI frame | 
|  | * @flp:    The FLOGI or PLOGI payload | 
|  | * @maxval: The maximum frame size upper limit; this may be less than what | 
|  | *	    is in the service parameters | 
|  | */ | 
|  | static unsigned int fc_plogi_get_maxframe(struct fc_els_flogi *flp, | 
|  | unsigned int maxval) | 
|  | { | 
|  | unsigned int mfs; | 
|  |  | 
|  | /* | 
|  | * Get max payload from the common service parameters and the | 
|  | * class 3 receive data field size. | 
|  | */ | 
|  | mfs = ntohs(flp->fl_csp.sp_bb_data) & FC_SP_BB_DATA_MASK; | 
|  | if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval) | 
|  | maxval = mfs; | 
|  | mfs = ntohs(flp->fl_cssp[3 - 1].cp_rdfs); | 
|  | if (mfs >= FC_SP_MIN_MAX_PAYLOAD && mfs < maxval) | 
|  | maxval = mfs; | 
|  | return maxval; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_state_enter() - Change the state of a remote port | 
|  | * @rdata: The remote port whose state should change | 
|  | * @new:   The new state | 
|  | * | 
|  | * Locking Note: Called with the rport lock held | 
|  | */ | 
|  | static void fc_rport_state_enter(struct fc_rport_priv *rdata, | 
|  | enum fc_rport_state new) | 
|  | { | 
|  | if (rdata->rp_state != new) | 
|  | rdata->retries = 0; | 
|  | rdata->rp_state = new; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_work() - Handler for remote port events in the rport_event_queue | 
|  | * @work: Handle to the remote port being dequeued | 
|  | */ | 
|  | static void fc_rport_work(struct work_struct *work) | 
|  | { | 
|  | u32 port_id; | 
|  | struct fc_rport_priv *rdata = | 
|  | container_of(work, struct fc_rport_priv, event_work); | 
|  | struct fc_rport_libfc_priv *rpriv; | 
|  | enum fc_rport_event event; | 
|  | struct fc_lport *lport = rdata->local_port; | 
|  | struct fc_rport_operations *rport_ops; | 
|  | struct fc_rport_identifiers ids; | 
|  | struct fc_rport *rport; | 
|  | struct fc4_prov *prov; | 
|  | u8 type; | 
|  |  | 
|  | mutex_lock(&rdata->rp_mutex); | 
|  | event = rdata->event; | 
|  | rport_ops = rdata->ops; | 
|  | rport = rdata->rport; | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "work event %u\n", event); | 
|  |  | 
|  | switch (event) { | 
|  | case RPORT_EV_READY: | 
|  | ids = rdata->ids; | 
|  | rdata->event = RPORT_EV_NONE; | 
|  | rdata->major_retries = 0; | 
|  | kref_get(&rdata->kref); | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  |  | 
|  | if (!rport) | 
|  | rport = fc_remote_port_add(lport->host, 0, &ids); | 
|  | if (!rport) { | 
|  | FC_RPORT_DBG(rdata, "Failed to add the rport\n"); | 
|  | lport->tt.rport_logoff(rdata); | 
|  | kref_put(&rdata->kref, lport->tt.rport_destroy); | 
|  | return; | 
|  | } | 
|  | mutex_lock(&rdata->rp_mutex); | 
|  | if (rdata->rport) | 
|  | FC_RPORT_DBG(rdata, "rport already allocated\n"); | 
|  | rdata->rport = rport; | 
|  | rport->maxframe_size = rdata->maxframe_size; | 
|  | rport->supported_classes = rdata->supported_classes; | 
|  |  | 
|  | rpriv = rport->dd_data; | 
|  | rpriv->local_port = lport; | 
|  | rpriv->rp_state = rdata->rp_state; | 
|  | rpriv->flags = rdata->flags; | 
|  | rpriv->e_d_tov = rdata->e_d_tov; | 
|  | rpriv->r_a_tov = rdata->r_a_tov; | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  |  | 
|  | if (rport_ops && rport_ops->event_callback) { | 
|  | FC_RPORT_DBG(rdata, "callback ev %d\n", event); | 
|  | rport_ops->event_callback(lport, rdata, event); | 
|  | } | 
|  | if (rdata->lld_event_callback) { | 
|  | FC_RPORT_DBG(rdata, "lld callback ev %d\n", event); | 
|  | rdata->lld_event_callback(lport, rdata, event); | 
|  | } | 
|  | kref_put(&rdata->kref, lport->tt.rport_destroy); | 
|  | break; | 
|  |  | 
|  | case RPORT_EV_FAILED: | 
|  | case RPORT_EV_LOGO: | 
|  | case RPORT_EV_STOP: | 
|  | if (rdata->prli_count) { | 
|  | mutex_lock(&fc_prov_mutex); | 
|  | for (type = 1; type < FC_FC4_PROV_SIZE; type++) { | 
|  | prov = fc_passive_prov[type]; | 
|  | if (prov && prov->prlo) | 
|  | prov->prlo(rdata); | 
|  | } | 
|  | mutex_unlock(&fc_prov_mutex); | 
|  | } | 
|  | port_id = rdata->ids.port_id; | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  |  | 
|  | if (rport_ops && rport_ops->event_callback) { | 
|  | FC_RPORT_DBG(rdata, "callback ev %d\n", event); | 
|  | rport_ops->event_callback(lport, rdata, event); | 
|  | } | 
|  | if (rdata->lld_event_callback) { | 
|  | FC_RPORT_DBG(rdata, "lld callback ev %d\n", event); | 
|  | rdata->lld_event_callback(lport, rdata, event); | 
|  | } | 
|  | cancel_delayed_work_sync(&rdata->retry_work); | 
|  |  | 
|  | /* | 
|  | * Reset any outstanding exchanges before freeing rport. | 
|  | */ | 
|  | lport->tt.exch_mgr_reset(lport, 0, port_id); | 
|  | lport->tt.exch_mgr_reset(lport, port_id, 0); | 
|  |  | 
|  | if (rport) { | 
|  | rpriv = rport->dd_data; | 
|  | rpriv->rp_state = RPORT_ST_DELETE; | 
|  | mutex_lock(&rdata->rp_mutex); | 
|  | rdata->rport = NULL; | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | fc_remote_port_delete(rport); | 
|  | } | 
|  |  | 
|  | mutex_lock(&lport->disc.disc_mutex); | 
|  | mutex_lock(&rdata->rp_mutex); | 
|  | if (rdata->rp_state == RPORT_ST_DELETE) { | 
|  | if (port_id == FC_FID_DIR_SERV) { | 
|  | rdata->event = RPORT_EV_NONE; | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | kref_put(&rdata->kref, lport->tt.rport_destroy); | 
|  | } else if ((rdata->flags & FC_RP_STARTED) && | 
|  | rdata->major_retries < | 
|  | lport->max_rport_retry_count) { | 
|  | rdata->major_retries++; | 
|  | rdata->event = RPORT_EV_NONE; | 
|  | FC_RPORT_DBG(rdata, "work restart\n"); | 
|  | fc_rport_enter_flogi(rdata); | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | } else { | 
|  | FC_RPORT_DBG(rdata, "work delete\n"); | 
|  | list_del_rcu(&rdata->peers); | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | kref_put(&rdata->kref, lport->tt.rport_destroy); | 
|  | } | 
|  | } else { | 
|  | /* | 
|  | * Re-open for events.  Reissue READY event if ready. | 
|  | */ | 
|  | rdata->event = RPORT_EV_NONE; | 
|  | if (rdata->rp_state == RPORT_ST_READY) | 
|  | fc_rport_enter_ready(rdata); | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | } | 
|  | mutex_unlock(&lport->disc.disc_mutex); | 
|  | break; | 
|  |  | 
|  | default: | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_login() - Start the remote port login state machine | 
|  | * @rdata: The remote port to be logged in to | 
|  | * | 
|  | * Locking Note: Called without the rport lock held. This | 
|  | * function will hold the rport lock, call an _enter_* | 
|  | * function and then unlock the rport. | 
|  | * | 
|  | * This indicates the intent to be logged into the remote port. | 
|  | * If it appears we are already logged in, ADISC is used to verify | 
|  | * the setup. | 
|  | */ | 
|  | static int fc_rport_login(struct fc_rport_priv *rdata) | 
|  | { | 
|  | mutex_lock(&rdata->rp_mutex); | 
|  |  | 
|  | rdata->flags |= FC_RP_STARTED; | 
|  | switch (rdata->rp_state) { | 
|  | case RPORT_ST_READY: | 
|  | FC_RPORT_DBG(rdata, "ADISC port\n"); | 
|  | fc_rport_enter_adisc(rdata); | 
|  | break; | 
|  | case RPORT_ST_DELETE: | 
|  | FC_RPORT_DBG(rdata, "Restart deleted port\n"); | 
|  | break; | 
|  | default: | 
|  | FC_RPORT_DBG(rdata, "Login to port\n"); | 
|  | fc_rport_enter_flogi(rdata); | 
|  | break; | 
|  | } | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_enter_delete() - Schedule a remote port to be deleted | 
|  | * @rdata: The remote port to be deleted | 
|  | * @event: The event to report as the reason for deletion | 
|  | * | 
|  | * Locking Note: Called with the rport lock held. | 
|  | * | 
|  | * Allow state change into DELETE only once. | 
|  | * | 
|  | * Call queue_work only if there's no event already pending. | 
|  | * Set the new event so that the old pending event will not occur. | 
|  | * Since we have the mutex, even if fc_rport_work() is already started, | 
|  | * it'll see the new event. | 
|  | */ | 
|  | static void fc_rport_enter_delete(struct fc_rport_priv *rdata, | 
|  | enum fc_rport_event event) | 
|  | { | 
|  | if (rdata->rp_state == RPORT_ST_DELETE) | 
|  | return; | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Delete port\n"); | 
|  |  | 
|  | fc_rport_state_enter(rdata, RPORT_ST_DELETE); | 
|  |  | 
|  | if (rdata->event == RPORT_EV_NONE) | 
|  | queue_work(rport_event_queue, &rdata->event_work); | 
|  | rdata->event = event; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_logoff() - Logoff and remove a remote port | 
|  | * @rdata: The remote port to be logged off of | 
|  | * | 
|  | * Locking Note: Called without the rport lock held. This | 
|  | * function will hold the rport lock, call an _enter_* | 
|  | * function and then unlock the rport. | 
|  | */ | 
|  | static int fc_rport_logoff(struct fc_rport_priv *rdata) | 
|  | { | 
|  | mutex_lock(&rdata->rp_mutex); | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Remove port\n"); | 
|  |  | 
|  | rdata->flags &= ~FC_RP_STARTED; | 
|  | if (rdata->rp_state == RPORT_ST_DELETE) { | 
|  | FC_RPORT_DBG(rdata, "Port in Delete state, not removing\n"); | 
|  | goto out; | 
|  | } | 
|  | fc_rport_enter_logo(rdata); | 
|  |  | 
|  | /* | 
|  | * Change the state to Delete so that we discard | 
|  | * the response. | 
|  | */ | 
|  | fc_rport_enter_delete(rdata, RPORT_EV_STOP); | 
|  | out: | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_enter_ready() - Transition to the RPORT_ST_READY state | 
|  | * @rdata: The remote port that is ready | 
|  | * | 
|  | * Locking Note: The rport lock is expected to be held before calling | 
|  | * this routine. | 
|  | */ | 
|  | static void fc_rport_enter_ready(struct fc_rport_priv *rdata) | 
|  | { | 
|  | fc_rport_state_enter(rdata, RPORT_ST_READY); | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Port is Ready\n"); | 
|  |  | 
|  | if (rdata->event == RPORT_EV_NONE) | 
|  | queue_work(rport_event_queue, &rdata->event_work); | 
|  | rdata->event = RPORT_EV_READY; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_timeout() - Handler for the retry_work timer | 
|  | * @work: Handle to the remote port that has timed out | 
|  | * | 
|  | * Locking Note: Called without the rport lock held. This | 
|  | * function will hold the rport lock, call an _enter_* | 
|  | * function and then unlock the rport. | 
|  | */ | 
|  | static void fc_rport_timeout(struct work_struct *work) | 
|  | { | 
|  | struct fc_rport_priv *rdata = | 
|  | container_of(work, struct fc_rport_priv, retry_work.work); | 
|  |  | 
|  | mutex_lock(&rdata->rp_mutex); | 
|  |  | 
|  | switch (rdata->rp_state) { | 
|  | case RPORT_ST_FLOGI: | 
|  | fc_rport_enter_flogi(rdata); | 
|  | break; | 
|  | case RPORT_ST_PLOGI: | 
|  | fc_rport_enter_plogi(rdata); | 
|  | break; | 
|  | case RPORT_ST_PRLI: | 
|  | fc_rport_enter_prli(rdata); | 
|  | break; | 
|  | case RPORT_ST_RTV: | 
|  | fc_rport_enter_rtv(rdata); | 
|  | break; | 
|  | case RPORT_ST_ADISC: | 
|  | fc_rport_enter_adisc(rdata); | 
|  | break; | 
|  | case RPORT_ST_PLOGI_WAIT: | 
|  | case RPORT_ST_READY: | 
|  | case RPORT_ST_INIT: | 
|  | case RPORT_ST_DELETE: | 
|  | break; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_error() - Error handler, called once retries have been exhausted | 
|  | * @rdata: The remote port the error is happened on | 
|  | * @fp:	   The error code encapsulated in a frame pointer | 
|  | * | 
|  | * Locking Note: The rport lock is expected to be held before | 
|  | * calling this routine | 
|  | */ | 
|  | static void fc_rport_error(struct fc_rport_priv *rdata, struct fc_frame *fp) | 
|  | { | 
|  | FC_RPORT_DBG(rdata, "Error %ld in state %s, retries %d\n", | 
|  | IS_ERR(fp) ? -PTR_ERR(fp) : 0, | 
|  | fc_rport_state(rdata), rdata->retries); | 
|  |  | 
|  | switch (rdata->rp_state) { | 
|  | case RPORT_ST_FLOGI: | 
|  | case RPORT_ST_PLOGI: | 
|  | rdata->flags &= ~FC_RP_STARTED; | 
|  | fc_rport_enter_delete(rdata, RPORT_EV_FAILED); | 
|  | break; | 
|  | case RPORT_ST_RTV: | 
|  | fc_rport_enter_ready(rdata); | 
|  | break; | 
|  | case RPORT_ST_PRLI: | 
|  | case RPORT_ST_ADISC: | 
|  | fc_rport_enter_logo(rdata); | 
|  | break; | 
|  | case RPORT_ST_PLOGI_WAIT: | 
|  | case RPORT_ST_DELETE: | 
|  | case RPORT_ST_READY: | 
|  | case RPORT_ST_INIT: | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_error_retry() - Handler for remote port state retries | 
|  | * @rdata: The remote port whose state is to be retried | 
|  | * @fp:	   The error code encapsulated in a frame pointer | 
|  | * | 
|  | * If the error was an exchange timeout retry immediately, | 
|  | * otherwise wait for E_D_TOV. | 
|  | * | 
|  | * Locking Note: The rport lock is expected to be held before | 
|  | * calling this routine | 
|  | */ | 
|  | static void fc_rport_error_retry(struct fc_rport_priv *rdata, | 
|  | struct fc_frame *fp) | 
|  | { | 
|  | unsigned long delay = msecs_to_jiffies(FC_DEF_E_D_TOV); | 
|  |  | 
|  | /* make sure this isn't an FC_EX_CLOSED error, never retry those */ | 
|  | if (PTR_ERR(fp) == -FC_EX_CLOSED) | 
|  | goto out; | 
|  |  | 
|  | if (rdata->retries < rdata->local_port->max_rport_retry_count) { | 
|  | FC_RPORT_DBG(rdata, "Error %ld in state %s, retrying\n", | 
|  | PTR_ERR(fp), fc_rport_state(rdata)); | 
|  | rdata->retries++; | 
|  | /* no additional delay on exchange timeouts */ | 
|  | if (PTR_ERR(fp) == -FC_EX_TIMEOUT) | 
|  | delay = 0; | 
|  | schedule_delayed_work(&rdata->retry_work, delay); | 
|  | return; | 
|  | } | 
|  |  | 
|  | out: | 
|  | fc_rport_error(rdata, fp); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_login_complete() - Handle parameters and completion of p-mp login. | 
|  | * @rdata:  The remote port which we logged into or which logged into us. | 
|  | * @fp:     The FLOGI or PLOGI request or response frame | 
|  | * | 
|  | * Returns non-zero error if a problem is detected with the frame. | 
|  | * Does not free the frame. | 
|  | * | 
|  | * This is only used in point-to-multipoint mode for FIP currently. | 
|  | */ | 
|  | static int fc_rport_login_complete(struct fc_rport_priv *rdata, | 
|  | struct fc_frame *fp) | 
|  | { | 
|  | struct fc_lport *lport = rdata->local_port; | 
|  | struct fc_els_flogi *flogi; | 
|  | unsigned int e_d_tov; | 
|  | u16 csp_flags; | 
|  |  | 
|  | flogi = fc_frame_payload_get(fp, sizeof(*flogi)); | 
|  | if (!flogi) | 
|  | return -EINVAL; | 
|  |  | 
|  | csp_flags = ntohs(flogi->fl_csp.sp_features); | 
|  |  | 
|  | if (fc_frame_payload_op(fp) == ELS_FLOGI) { | 
|  | if (csp_flags & FC_SP_FT_FPORT) { | 
|  | FC_RPORT_DBG(rdata, "Fabric bit set in FLOGI\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  | } else { | 
|  |  | 
|  | /* | 
|  | * E_D_TOV is not valid on an incoming FLOGI request. | 
|  | */ | 
|  | e_d_tov = ntohl(flogi->fl_csp.sp_e_d_tov); | 
|  | if (csp_flags & FC_SP_FT_EDTR) | 
|  | e_d_tov /= 1000000; | 
|  | if (e_d_tov > rdata->e_d_tov) | 
|  | rdata->e_d_tov = e_d_tov; | 
|  | } | 
|  | rdata->maxframe_size = fc_plogi_get_maxframe(flogi, lport->mfs); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_flogi_resp() - Handle response to FLOGI request for p-mp mode | 
|  | * @sp:	    The sequence that the FLOGI was on | 
|  | * @fp:	    The FLOGI response frame | 
|  | * @rp_arg: The remote port that received the FLOGI response | 
|  | */ | 
|  | static void fc_rport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, | 
|  | void *rp_arg) | 
|  | { | 
|  | struct fc_rport_priv *rdata = rp_arg; | 
|  | struct fc_lport *lport = rdata->local_port; | 
|  | struct fc_els_flogi *flogi; | 
|  | unsigned int r_a_tov; | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Received a FLOGI %s\n", fc_els_resp_type(fp)); | 
|  |  | 
|  | if (fp == ERR_PTR(-FC_EX_CLOSED)) | 
|  | goto put; | 
|  |  | 
|  | mutex_lock(&rdata->rp_mutex); | 
|  |  | 
|  | if (rdata->rp_state != RPORT_ST_FLOGI) { | 
|  | FC_RPORT_DBG(rdata, "Received a FLOGI response, but in state " | 
|  | "%s\n", fc_rport_state(rdata)); | 
|  | if (IS_ERR(fp)) | 
|  | goto err; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (IS_ERR(fp)) { | 
|  | fc_rport_error(rdata, fp); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (fc_frame_payload_op(fp) != ELS_LS_ACC) | 
|  | goto bad; | 
|  | if (fc_rport_login_complete(rdata, fp)) | 
|  | goto bad; | 
|  |  | 
|  | flogi = fc_frame_payload_get(fp, sizeof(*flogi)); | 
|  | if (!flogi) | 
|  | goto bad; | 
|  | r_a_tov = ntohl(flogi->fl_csp.sp_r_a_tov); | 
|  | if (r_a_tov > rdata->r_a_tov) | 
|  | rdata->r_a_tov = r_a_tov; | 
|  |  | 
|  | if (rdata->ids.port_name < lport->wwpn) | 
|  | fc_rport_enter_plogi(rdata); | 
|  | else | 
|  | fc_rport_state_enter(rdata, RPORT_ST_PLOGI_WAIT); | 
|  | out: | 
|  | fc_frame_free(fp); | 
|  | err: | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | put: | 
|  | kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy); | 
|  | return; | 
|  | bad: | 
|  | FC_RPORT_DBG(rdata, "Bad FLOGI response\n"); | 
|  | fc_rport_error_retry(rdata, fp); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_enter_flogi() - Send a FLOGI request to the remote port for p-mp | 
|  | * @rdata: The remote port to send a FLOGI to | 
|  | * | 
|  | * Locking Note: The rport lock is expected to be held before calling | 
|  | * this routine. | 
|  | */ | 
|  | static void fc_rport_enter_flogi(struct fc_rport_priv *rdata) | 
|  | { | 
|  | struct fc_lport *lport = rdata->local_port; | 
|  | struct fc_frame *fp; | 
|  |  | 
|  | if (!lport->point_to_multipoint) | 
|  | return fc_rport_enter_plogi(rdata); | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Entered FLOGI state from %s state\n", | 
|  | fc_rport_state(rdata)); | 
|  |  | 
|  | fc_rport_state_enter(rdata, RPORT_ST_FLOGI); | 
|  |  | 
|  | fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi)); | 
|  | if (!fp) | 
|  | return fc_rport_error_retry(rdata, fp); | 
|  |  | 
|  | if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_FLOGI, | 
|  | fc_rport_flogi_resp, rdata, | 
|  | 2 * lport->r_a_tov)) | 
|  | fc_rport_error_retry(rdata, NULL); | 
|  | else | 
|  | kref_get(&rdata->kref); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_recv_flogi_req() - Handle Fabric Login (FLOGI) request in p-mp mode | 
|  | * @lport: The local port that received the PLOGI request | 
|  | * @rx_fp: The PLOGI request frame | 
|  | */ | 
|  | static void fc_rport_recv_flogi_req(struct fc_lport *lport, | 
|  | struct fc_frame *rx_fp) | 
|  | { | 
|  | struct fc_disc *disc; | 
|  | struct fc_els_flogi *flp; | 
|  | struct fc_rport_priv *rdata; | 
|  | struct fc_frame *fp = rx_fp; | 
|  | struct fc_seq_els_data rjt_data; | 
|  | u32 sid; | 
|  |  | 
|  | sid = fc_frame_sid(fp); | 
|  |  | 
|  | FC_RPORT_ID_DBG(lport, sid, "Received FLOGI request\n"); | 
|  |  | 
|  | disc = &lport->disc; | 
|  | mutex_lock(&disc->disc_mutex); | 
|  |  | 
|  | if (!lport->point_to_multipoint) { | 
|  | rjt_data.reason = ELS_RJT_UNSUP; | 
|  | rjt_data.explan = ELS_EXPL_NONE; | 
|  | goto reject; | 
|  | } | 
|  |  | 
|  | flp = fc_frame_payload_get(fp, sizeof(*flp)); | 
|  | if (!flp) { | 
|  | rjt_data.reason = ELS_RJT_LOGIC; | 
|  | rjt_data.explan = ELS_EXPL_INV_LEN; | 
|  | goto reject; | 
|  | } | 
|  |  | 
|  | rdata = lport->tt.rport_lookup(lport, sid); | 
|  | if (!rdata) { | 
|  | rjt_data.reason = ELS_RJT_FIP; | 
|  | rjt_data.explan = ELS_EXPL_NOT_NEIGHBOR; | 
|  | goto reject; | 
|  | } | 
|  | mutex_lock(&rdata->rp_mutex); | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Received FLOGI in %s state\n", | 
|  | fc_rport_state(rdata)); | 
|  |  | 
|  | switch (rdata->rp_state) { | 
|  | case RPORT_ST_INIT: | 
|  | /* | 
|  | * If received the FLOGI request on RPORT which is INIT state | 
|  | * (means not transition to FLOGI either fc_rport timeout | 
|  | * function didn;t trigger or this end hasn;t received | 
|  | * beacon yet from other end. In that case only, allow RPORT | 
|  | * state machine to continue, otherwise fall through which | 
|  | * causes the code to send reject response. | 
|  | * NOTE; Not checking for FIP->state such as VNMP_UP or | 
|  | * VNMP_CLAIM because if FIP state is not one of those, | 
|  | * RPORT wouldn;t have created and 'rport_lookup' would have | 
|  | * failed anyway in that case. | 
|  | */ | 
|  | if (lport->point_to_multipoint) | 
|  | break; | 
|  | case RPORT_ST_DELETE: | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | rjt_data.reason = ELS_RJT_FIP; | 
|  | rjt_data.explan = ELS_EXPL_NOT_NEIGHBOR; | 
|  | goto reject; | 
|  | case RPORT_ST_FLOGI: | 
|  | case RPORT_ST_PLOGI_WAIT: | 
|  | case RPORT_ST_PLOGI: | 
|  | break; | 
|  | case RPORT_ST_PRLI: | 
|  | case RPORT_ST_RTV: | 
|  | case RPORT_ST_READY: | 
|  | case RPORT_ST_ADISC: | 
|  | /* | 
|  | * Set the remote port to be deleted and to then restart. | 
|  | * This queues work to be sure exchanges are reset. | 
|  | */ | 
|  | fc_rport_enter_delete(rdata, RPORT_EV_LOGO); | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | rjt_data.reason = ELS_RJT_BUSY; | 
|  | rjt_data.explan = ELS_EXPL_NONE; | 
|  | goto reject; | 
|  | } | 
|  | if (fc_rport_login_complete(rdata, fp)) { | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | rjt_data.reason = ELS_RJT_LOGIC; | 
|  | rjt_data.explan = ELS_EXPL_NONE; | 
|  | goto reject; | 
|  | } | 
|  |  | 
|  | fp = fc_frame_alloc(lport, sizeof(*flp)); | 
|  | if (!fp) | 
|  | goto out; | 
|  |  | 
|  | fc_flogi_fill(lport, fp); | 
|  | flp = fc_frame_payload_get(fp, sizeof(*flp)); | 
|  | flp->fl_cmd = ELS_LS_ACC; | 
|  |  | 
|  | fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0); | 
|  | lport->tt.frame_send(lport, fp); | 
|  |  | 
|  | if (rdata->ids.port_name < lport->wwpn) | 
|  | fc_rport_enter_plogi(rdata); | 
|  | else | 
|  | fc_rport_state_enter(rdata, RPORT_ST_PLOGI_WAIT); | 
|  | out: | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | mutex_unlock(&disc->disc_mutex); | 
|  | fc_frame_free(rx_fp); | 
|  | return; | 
|  |  | 
|  | reject: | 
|  | mutex_unlock(&disc->disc_mutex); | 
|  | lport->tt.seq_els_rsp_send(rx_fp, ELS_LS_RJT, &rjt_data); | 
|  | fc_frame_free(rx_fp); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_plogi_resp() - Handler for ELS PLOGI responses | 
|  | * @sp:	       The sequence the PLOGI is on | 
|  | * @fp:	       The PLOGI response frame | 
|  | * @rdata_arg: The remote port that sent the PLOGI response | 
|  | * | 
|  | * Locking Note: This function will be called without the rport lock | 
|  | * held, but it will lock, call an _enter_* function or fc_rport_error | 
|  | * and then unlock the rport. | 
|  | */ | 
|  | static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp, | 
|  | void *rdata_arg) | 
|  | { | 
|  | struct fc_rport_priv *rdata = rdata_arg; | 
|  | struct fc_lport *lport = rdata->local_port; | 
|  | struct fc_els_flogi *plp = NULL; | 
|  | u16 csp_seq; | 
|  | u16 cssp_seq; | 
|  | u8 op; | 
|  |  | 
|  | mutex_lock(&rdata->rp_mutex); | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Received a PLOGI %s\n", fc_els_resp_type(fp)); | 
|  |  | 
|  | if (rdata->rp_state != RPORT_ST_PLOGI) { | 
|  | FC_RPORT_DBG(rdata, "Received a PLOGI response, but in state " | 
|  | "%s\n", fc_rport_state(rdata)); | 
|  | if (IS_ERR(fp)) | 
|  | goto err; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (IS_ERR(fp)) { | 
|  | fc_rport_error_retry(rdata, fp); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | op = fc_frame_payload_op(fp); | 
|  | if (op == ELS_LS_ACC && | 
|  | (plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) { | 
|  | rdata->ids.port_name = get_unaligned_be64(&plp->fl_wwpn); | 
|  | rdata->ids.node_name = get_unaligned_be64(&plp->fl_wwnn); | 
|  |  | 
|  | /* save plogi response sp_features for further reference */ | 
|  | rdata->sp_features = ntohs(plp->fl_csp.sp_features); | 
|  |  | 
|  | if (lport->point_to_multipoint) | 
|  | fc_rport_login_complete(rdata, fp); | 
|  | csp_seq = ntohs(plp->fl_csp.sp_tot_seq); | 
|  | cssp_seq = ntohs(plp->fl_cssp[3 - 1].cp_con_seq); | 
|  | if (cssp_seq < csp_seq) | 
|  | csp_seq = cssp_seq; | 
|  | rdata->max_seq = csp_seq; | 
|  | rdata->maxframe_size = fc_plogi_get_maxframe(plp, lport->mfs); | 
|  | fc_rport_enter_prli(rdata); | 
|  | } else | 
|  | fc_rport_error_retry(rdata, fp); | 
|  |  | 
|  | out: | 
|  | fc_frame_free(fp); | 
|  | err: | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_enter_plogi() - Send Port Login (PLOGI) request | 
|  | * @rdata: The remote port to send a PLOGI to | 
|  | * | 
|  | * Locking Note: The rport lock is expected to be held before calling | 
|  | * this routine. | 
|  | */ | 
|  | static void fc_rport_enter_plogi(struct fc_rport_priv *rdata) | 
|  | { | 
|  | struct fc_lport *lport = rdata->local_port; | 
|  | struct fc_frame *fp; | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Port entered PLOGI state from %s state\n", | 
|  | fc_rport_state(rdata)); | 
|  |  | 
|  | fc_rport_state_enter(rdata, RPORT_ST_PLOGI); | 
|  |  | 
|  | rdata->maxframe_size = FC_MIN_MAX_PAYLOAD; | 
|  | fp = fc_frame_alloc(lport, sizeof(struct fc_els_flogi)); | 
|  | if (!fp) { | 
|  | FC_RPORT_DBG(rdata, "%s frame alloc failed\n", __func__); | 
|  | fc_rport_error_retry(rdata, fp); | 
|  | return; | 
|  | } | 
|  | rdata->e_d_tov = lport->e_d_tov; | 
|  |  | 
|  | if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_PLOGI, | 
|  | fc_rport_plogi_resp, rdata, | 
|  | 2 * lport->r_a_tov)) | 
|  | fc_rport_error_retry(rdata, NULL); | 
|  | else | 
|  | kref_get(&rdata->kref); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_prli_resp() - Process Login (PRLI) response handler | 
|  | * @sp:	       The sequence the PRLI response was on | 
|  | * @fp:	       The PRLI response frame | 
|  | * @rdata_arg: The remote port that sent the PRLI response | 
|  | * | 
|  | * Locking Note: This function will be called without the rport lock | 
|  | * held, but it will lock, call an _enter_* function or fc_rport_error | 
|  | * and then unlock the rport. | 
|  | */ | 
|  | static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp, | 
|  | void *rdata_arg) | 
|  | { | 
|  | struct fc_rport_priv *rdata = rdata_arg; | 
|  | struct { | 
|  | struct fc_els_prli prli; | 
|  | struct fc_els_spp spp; | 
|  | } *pp; | 
|  | struct fc_els_spp temp_spp; | 
|  | struct fc4_prov *prov; | 
|  | u32 roles = FC_RPORT_ROLE_UNKNOWN; | 
|  | u32 fcp_parm = 0; | 
|  | u8 op; | 
|  | u8 resp_code = 0; | 
|  |  | 
|  | mutex_lock(&rdata->rp_mutex); | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Received a PRLI %s\n", fc_els_resp_type(fp)); | 
|  |  | 
|  | if (rdata->rp_state != RPORT_ST_PRLI) { | 
|  | FC_RPORT_DBG(rdata, "Received a PRLI response, but in state " | 
|  | "%s\n", fc_rport_state(rdata)); | 
|  | if (IS_ERR(fp)) | 
|  | goto err; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (IS_ERR(fp)) { | 
|  | fc_rport_error_retry(rdata, fp); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | /* reinitialize remote port roles */ | 
|  | rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN; | 
|  |  | 
|  | op = fc_frame_payload_op(fp); | 
|  | if (op == ELS_LS_ACC) { | 
|  | pp = fc_frame_payload_get(fp, sizeof(*pp)); | 
|  | if (!pp) | 
|  | goto out; | 
|  |  | 
|  | resp_code = (pp->spp.spp_flags & FC_SPP_RESP_MASK); | 
|  | FC_RPORT_DBG(rdata, "PRLI spp_flags = 0x%x\n", | 
|  | pp->spp.spp_flags); | 
|  | rdata->spp_type = pp->spp.spp_type; | 
|  | if (resp_code != FC_SPP_RESP_ACK) { | 
|  | if (resp_code == FC_SPP_RESP_CONF) | 
|  | fc_rport_error(rdata, fp); | 
|  | else | 
|  | fc_rport_error_retry(rdata, fp); | 
|  | goto out; | 
|  | } | 
|  | if (pp->prli.prli_spp_len < sizeof(pp->spp)) | 
|  | goto out; | 
|  |  | 
|  | fcp_parm = ntohl(pp->spp.spp_params); | 
|  | if (fcp_parm & FCP_SPPF_RETRY) | 
|  | rdata->flags |= FC_RP_FLAGS_RETRY; | 
|  | if (fcp_parm & FCP_SPPF_CONF_COMPL) | 
|  | rdata->flags |= FC_RP_FLAGS_CONF_REQ; | 
|  |  | 
|  | prov = fc_passive_prov[FC_TYPE_FCP]; | 
|  | if (prov) { | 
|  | memset(&temp_spp, 0, sizeof(temp_spp)); | 
|  | prov->prli(rdata, pp->prli.prli_spp_len, | 
|  | &pp->spp, &temp_spp); | 
|  | } | 
|  |  | 
|  | rdata->supported_classes = FC_COS_CLASS3; | 
|  | if (fcp_parm & FCP_SPPF_INIT_FCN) | 
|  | roles |= FC_RPORT_ROLE_FCP_INITIATOR; | 
|  | if (fcp_parm & FCP_SPPF_TARG_FCN) | 
|  | roles |= FC_RPORT_ROLE_FCP_TARGET; | 
|  |  | 
|  | rdata->ids.roles = roles; | 
|  | fc_rport_enter_rtv(rdata); | 
|  |  | 
|  | } else { | 
|  | FC_RPORT_DBG(rdata, "Bad ELS response for PRLI command\n"); | 
|  | fc_rport_error_retry(rdata, fp); | 
|  | } | 
|  |  | 
|  | out: | 
|  | fc_frame_free(fp); | 
|  | err: | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_enter_prli() - Send Process Login (PRLI) request | 
|  | * @rdata: The remote port to send the PRLI request to | 
|  | * | 
|  | * Locking Note: The rport lock is expected to be held before calling | 
|  | * this routine. | 
|  | */ | 
|  | static void fc_rport_enter_prli(struct fc_rport_priv *rdata) | 
|  | { | 
|  | struct fc_lport *lport = rdata->local_port; | 
|  | struct { | 
|  | struct fc_els_prli prli; | 
|  | struct fc_els_spp spp; | 
|  | } *pp; | 
|  | struct fc_frame *fp; | 
|  | struct fc4_prov *prov; | 
|  |  | 
|  | /* | 
|  | * If the rport is one of the well known addresses | 
|  | * we skip PRLI and RTV and go straight to READY. | 
|  | */ | 
|  | if (rdata->ids.port_id >= FC_FID_DOM_MGR) { | 
|  | fc_rport_enter_ready(rdata); | 
|  | return; | 
|  | } | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Port entered PRLI state from %s state\n", | 
|  | fc_rport_state(rdata)); | 
|  |  | 
|  | fc_rport_state_enter(rdata, RPORT_ST_PRLI); | 
|  |  | 
|  | fp = fc_frame_alloc(lport, sizeof(*pp)); | 
|  | if (!fp) { | 
|  | fc_rport_error_retry(rdata, fp); | 
|  | return; | 
|  | } | 
|  |  | 
|  | fc_prli_fill(lport, fp); | 
|  |  | 
|  | prov = fc_passive_prov[FC_TYPE_FCP]; | 
|  | if (prov) { | 
|  | pp = fc_frame_payload_get(fp, sizeof(*pp)); | 
|  | prov->prli(rdata, sizeof(pp->spp), NULL, &pp->spp); | 
|  | } | 
|  |  | 
|  | fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rdata->ids.port_id, | 
|  | fc_host_port_id(lport->host), FC_TYPE_ELS, | 
|  | FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0); | 
|  |  | 
|  | if (!lport->tt.exch_seq_send(lport, fp, fc_rport_prli_resp, | 
|  | NULL, rdata, 2 * lport->r_a_tov)) | 
|  | fc_rport_error_retry(rdata, NULL); | 
|  | else | 
|  | kref_get(&rdata->kref); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_els_rtv_resp() - Handler for Request Timeout Value (RTV) responses | 
|  | * @sp:	       The sequence the RTV was on | 
|  | * @fp:	       The RTV response frame | 
|  | * @rdata_arg: The remote port that sent the RTV response | 
|  | * | 
|  | * Many targets don't seem to support this. | 
|  | * | 
|  | * Locking Note: This function will be called without the rport lock | 
|  | * held, but it will lock, call an _enter_* function or fc_rport_error | 
|  | * and then unlock the rport. | 
|  | */ | 
|  | static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp, | 
|  | void *rdata_arg) | 
|  | { | 
|  | struct fc_rport_priv *rdata = rdata_arg; | 
|  | u8 op; | 
|  |  | 
|  | mutex_lock(&rdata->rp_mutex); | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Received a RTV %s\n", fc_els_resp_type(fp)); | 
|  |  | 
|  | if (rdata->rp_state != RPORT_ST_RTV) { | 
|  | FC_RPORT_DBG(rdata, "Received a RTV response, but in state " | 
|  | "%s\n", fc_rport_state(rdata)); | 
|  | if (IS_ERR(fp)) | 
|  | goto err; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (IS_ERR(fp)) { | 
|  | fc_rport_error(rdata, fp); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | op = fc_frame_payload_op(fp); | 
|  | if (op == ELS_LS_ACC) { | 
|  | struct fc_els_rtv_acc *rtv; | 
|  | u32 toq; | 
|  | u32 tov; | 
|  |  | 
|  | rtv = fc_frame_payload_get(fp, sizeof(*rtv)); | 
|  | if (rtv) { | 
|  | toq = ntohl(rtv->rtv_toq); | 
|  | tov = ntohl(rtv->rtv_r_a_tov); | 
|  | if (tov == 0) | 
|  | tov = 1; | 
|  | rdata->r_a_tov = tov; | 
|  | tov = ntohl(rtv->rtv_e_d_tov); | 
|  | if (toq & FC_ELS_RTV_EDRES) | 
|  | tov /= 1000000; | 
|  | if (tov == 0) | 
|  | tov = 1; | 
|  | rdata->e_d_tov = tov; | 
|  | } | 
|  | } | 
|  |  | 
|  | fc_rport_enter_ready(rdata); | 
|  |  | 
|  | out: | 
|  | fc_frame_free(fp); | 
|  | err: | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_enter_rtv() - Send Request Timeout Value (RTV) request | 
|  | * @rdata: The remote port to send the RTV request to | 
|  | * | 
|  | * Locking Note: The rport lock is expected to be held before calling | 
|  | * this routine. | 
|  | */ | 
|  | static void fc_rport_enter_rtv(struct fc_rport_priv *rdata) | 
|  | { | 
|  | struct fc_frame *fp; | 
|  | struct fc_lport *lport = rdata->local_port; | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Port entered RTV state from %s state\n", | 
|  | fc_rport_state(rdata)); | 
|  |  | 
|  | fc_rport_state_enter(rdata, RPORT_ST_RTV); | 
|  |  | 
|  | fp = fc_frame_alloc(lport, sizeof(struct fc_els_rtv)); | 
|  | if (!fp) { | 
|  | fc_rport_error_retry(rdata, fp); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_RTV, | 
|  | fc_rport_rtv_resp, rdata, | 
|  | 2 * lport->r_a_tov)) | 
|  | fc_rport_error_retry(rdata, NULL); | 
|  | else | 
|  | kref_get(&rdata->kref); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_logo_resp() - Handler for logout (LOGO) responses | 
|  | * @sp:	       The sequence the LOGO was on | 
|  | * @fp:	       The LOGO response frame | 
|  | * @lport_arg: The local port | 
|  | */ | 
|  | static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp, | 
|  | void *lport_arg) | 
|  | { | 
|  | struct fc_lport *lport = lport_arg; | 
|  |  | 
|  | FC_RPORT_ID_DBG(lport, fc_seq_exch(sp)->did, | 
|  | "Received a LOGO %s\n", fc_els_resp_type(fp)); | 
|  | if (IS_ERR(fp)) | 
|  | return; | 
|  | fc_frame_free(fp); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_enter_logo() - Send a logout (LOGO) request | 
|  | * @rdata: The remote port to send the LOGO request to | 
|  | * | 
|  | * Locking Note: The rport lock is expected to be held before calling | 
|  | * this routine. | 
|  | */ | 
|  | static void fc_rport_enter_logo(struct fc_rport_priv *rdata) | 
|  | { | 
|  | struct fc_lport *lport = rdata->local_port; | 
|  | struct fc_frame *fp; | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Port sending LOGO from %s state\n", | 
|  | fc_rport_state(rdata)); | 
|  |  | 
|  | fp = fc_frame_alloc(lport, sizeof(struct fc_els_logo)); | 
|  | if (!fp) | 
|  | return; | 
|  | (void)lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_LOGO, | 
|  | fc_rport_logo_resp, lport, 0); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_els_adisc_resp() - Handler for Address Discovery (ADISC) responses | 
|  | * @sp:	       The sequence the ADISC response was on | 
|  | * @fp:	       The ADISC response frame | 
|  | * @rdata_arg: The remote port that sent the ADISC response | 
|  | * | 
|  | * Locking Note: This function will be called without the rport lock | 
|  | * held, but it will lock, call an _enter_* function or fc_rport_error | 
|  | * and then unlock the rport. | 
|  | */ | 
|  | static void fc_rport_adisc_resp(struct fc_seq *sp, struct fc_frame *fp, | 
|  | void *rdata_arg) | 
|  | { | 
|  | struct fc_rport_priv *rdata = rdata_arg; | 
|  | struct fc_els_adisc *adisc; | 
|  | u8 op; | 
|  |  | 
|  | mutex_lock(&rdata->rp_mutex); | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Received a ADISC response\n"); | 
|  |  | 
|  | if (rdata->rp_state != RPORT_ST_ADISC) { | 
|  | FC_RPORT_DBG(rdata, "Received a ADISC resp but in state %s\n", | 
|  | fc_rport_state(rdata)); | 
|  | if (IS_ERR(fp)) | 
|  | goto err; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (IS_ERR(fp)) { | 
|  | fc_rport_error(rdata, fp); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If address verification failed.  Consider us logged out of the rport. | 
|  | * Since the rport is still in discovery, we want to be | 
|  | * logged in, so go to PLOGI state.  Otherwise, go back to READY. | 
|  | */ | 
|  | op = fc_frame_payload_op(fp); | 
|  | adisc = fc_frame_payload_get(fp, sizeof(*adisc)); | 
|  | if (op != ELS_LS_ACC || !adisc || | 
|  | ntoh24(adisc->adisc_port_id) != rdata->ids.port_id || | 
|  | get_unaligned_be64(&adisc->adisc_wwpn) != rdata->ids.port_name || | 
|  | get_unaligned_be64(&adisc->adisc_wwnn) != rdata->ids.node_name) { | 
|  | FC_RPORT_DBG(rdata, "ADISC error or mismatch\n"); | 
|  | fc_rport_enter_flogi(rdata); | 
|  | } else { | 
|  | FC_RPORT_DBG(rdata, "ADISC OK\n"); | 
|  | fc_rport_enter_ready(rdata); | 
|  | } | 
|  | out: | 
|  | fc_frame_free(fp); | 
|  | err: | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | kref_put(&rdata->kref, rdata->local_port->tt.rport_destroy); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_enter_adisc() - Send Address Discover (ADISC) request | 
|  | * @rdata: The remote port to send the ADISC request to | 
|  | * | 
|  | * Locking Note: The rport lock is expected to be held before calling | 
|  | * this routine. | 
|  | */ | 
|  | static void fc_rport_enter_adisc(struct fc_rport_priv *rdata) | 
|  | { | 
|  | struct fc_lport *lport = rdata->local_port; | 
|  | struct fc_frame *fp; | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "sending ADISC from %s state\n", | 
|  | fc_rport_state(rdata)); | 
|  |  | 
|  | fc_rport_state_enter(rdata, RPORT_ST_ADISC); | 
|  |  | 
|  | fp = fc_frame_alloc(lport, sizeof(struct fc_els_adisc)); | 
|  | if (!fp) { | 
|  | fc_rport_error_retry(rdata, fp); | 
|  | return; | 
|  | } | 
|  | if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_ADISC, | 
|  | fc_rport_adisc_resp, rdata, | 
|  | 2 * lport->r_a_tov)) | 
|  | fc_rport_error_retry(rdata, NULL); | 
|  | else | 
|  | kref_get(&rdata->kref); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_recv_adisc_req() - Handler for Address Discovery (ADISC) requests | 
|  | * @rdata: The remote port that sent the ADISC request | 
|  | * @in_fp: The ADISC request frame | 
|  | * | 
|  | * Locking Note:  Called with the lport and rport locks held. | 
|  | */ | 
|  | static void fc_rport_recv_adisc_req(struct fc_rport_priv *rdata, | 
|  | struct fc_frame *in_fp) | 
|  | { | 
|  | struct fc_lport *lport = rdata->local_port; | 
|  | struct fc_frame *fp; | 
|  | struct fc_els_adisc *adisc; | 
|  | struct fc_seq_els_data rjt_data; | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Received ADISC request\n"); | 
|  |  | 
|  | adisc = fc_frame_payload_get(in_fp, sizeof(*adisc)); | 
|  | if (!adisc) { | 
|  | rjt_data.reason = ELS_RJT_PROT; | 
|  | rjt_data.explan = ELS_EXPL_INV_LEN; | 
|  | lport->tt.seq_els_rsp_send(in_fp, ELS_LS_RJT, &rjt_data); | 
|  | goto drop; | 
|  | } | 
|  |  | 
|  | fp = fc_frame_alloc(lport, sizeof(*adisc)); | 
|  | if (!fp) | 
|  | goto drop; | 
|  | fc_adisc_fill(lport, fp); | 
|  | adisc = fc_frame_payload_get(fp, sizeof(*adisc)); | 
|  | adisc->adisc_cmd = ELS_LS_ACC; | 
|  | fc_fill_reply_hdr(fp, in_fp, FC_RCTL_ELS_REP, 0); | 
|  | lport->tt.frame_send(lport, fp); | 
|  | drop: | 
|  | fc_frame_free(in_fp); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_recv_rls_req() - Handle received Read Link Status request | 
|  | * @rdata: The remote port that sent the RLS request | 
|  | * @rx_fp: The PRLI request frame | 
|  | * | 
|  | * Locking Note: The rport lock is expected to be held before calling | 
|  | * this function. | 
|  | */ | 
|  | static void fc_rport_recv_rls_req(struct fc_rport_priv *rdata, | 
|  | struct fc_frame *rx_fp) | 
|  |  | 
|  | { | 
|  | struct fc_lport *lport = rdata->local_port; | 
|  | struct fc_frame *fp; | 
|  | struct fc_els_rls *rls; | 
|  | struct fc_els_rls_resp *rsp; | 
|  | struct fc_els_lesb *lesb; | 
|  | struct fc_seq_els_data rjt_data; | 
|  | struct fc_host_statistics *hst; | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Received RLS request while in state %s\n", | 
|  | fc_rport_state(rdata)); | 
|  |  | 
|  | rls = fc_frame_payload_get(rx_fp, sizeof(*rls)); | 
|  | if (!rls) { | 
|  | rjt_data.reason = ELS_RJT_PROT; | 
|  | rjt_data.explan = ELS_EXPL_INV_LEN; | 
|  | goto out_rjt; | 
|  | } | 
|  |  | 
|  | fp = fc_frame_alloc(lport, sizeof(*rsp)); | 
|  | if (!fp) { | 
|  | rjt_data.reason = ELS_RJT_UNAB; | 
|  | rjt_data.explan = ELS_EXPL_INSUF_RES; | 
|  | goto out_rjt; | 
|  | } | 
|  |  | 
|  | rsp = fc_frame_payload_get(fp, sizeof(*rsp)); | 
|  | memset(rsp, 0, sizeof(*rsp)); | 
|  | rsp->rls_cmd = ELS_LS_ACC; | 
|  | lesb = &rsp->rls_lesb; | 
|  | if (lport->tt.get_lesb) { | 
|  | /* get LESB from LLD if it supports it */ | 
|  | lport->tt.get_lesb(lport, lesb); | 
|  | } else { | 
|  | fc_get_host_stats(lport->host); | 
|  | hst = &lport->host_stats; | 
|  | lesb->lesb_link_fail = htonl(hst->link_failure_count); | 
|  | lesb->lesb_sync_loss = htonl(hst->loss_of_sync_count); | 
|  | lesb->lesb_sig_loss = htonl(hst->loss_of_signal_count); | 
|  | lesb->lesb_prim_err = htonl(hst->prim_seq_protocol_err_count); | 
|  | lesb->lesb_inv_word = htonl(hst->invalid_tx_word_count); | 
|  | lesb->lesb_inv_crc = htonl(hst->invalid_crc_count); | 
|  | } | 
|  |  | 
|  | fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0); | 
|  | lport->tt.frame_send(lport, fp); | 
|  | goto out; | 
|  |  | 
|  | out_rjt: | 
|  | lport->tt.seq_els_rsp_send(rx_fp, ELS_LS_RJT, &rjt_data); | 
|  | out: | 
|  | fc_frame_free(rx_fp); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_recv_els_req() - Handler for validated ELS requests | 
|  | * @lport: The local port that received the ELS request | 
|  | * @fp:	   The ELS request frame | 
|  | * | 
|  | * Handle incoming ELS requests that require port login. | 
|  | * The ELS opcode has already been validated by the caller. | 
|  | * | 
|  | * Locking Note: Called with the lport lock held. | 
|  | */ | 
|  | static void fc_rport_recv_els_req(struct fc_lport *lport, struct fc_frame *fp) | 
|  | { | 
|  | struct fc_rport_priv *rdata; | 
|  | struct fc_seq_els_data els_data; | 
|  |  | 
|  | mutex_lock(&lport->disc.disc_mutex); | 
|  | rdata = lport->tt.rport_lookup(lport, fc_frame_sid(fp)); | 
|  | if (!rdata) { | 
|  | mutex_unlock(&lport->disc.disc_mutex); | 
|  | goto reject; | 
|  | } | 
|  | mutex_lock(&rdata->rp_mutex); | 
|  | mutex_unlock(&lport->disc.disc_mutex); | 
|  |  | 
|  | switch (rdata->rp_state) { | 
|  | case RPORT_ST_PRLI: | 
|  | case RPORT_ST_RTV: | 
|  | case RPORT_ST_READY: | 
|  | case RPORT_ST_ADISC: | 
|  | break; | 
|  | default: | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | goto reject; | 
|  | } | 
|  |  | 
|  | switch (fc_frame_payload_op(fp)) { | 
|  | case ELS_PRLI: | 
|  | fc_rport_recv_prli_req(rdata, fp); | 
|  | break; | 
|  | case ELS_PRLO: | 
|  | fc_rport_recv_prlo_req(rdata, fp); | 
|  | break; | 
|  | case ELS_ADISC: | 
|  | fc_rport_recv_adisc_req(rdata, fp); | 
|  | break; | 
|  | case ELS_RRQ: | 
|  | lport->tt.seq_els_rsp_send(fp, ELS_RRQ, NULL); | 
|  | fc_frame_free(fp); | 
|  | break; | 
|  | case ELS_REC: | 
|  | lport->tt.seq_els_rsp_send(fp, ELS_REC, NULL); | 
|  | fc_frame_free(fp); | 
|  | break; | 
|  | case ELS_RLS: | 
|  | fc_rport_recv_rls_req(rdata, fp); | 
|  | break; | 
|  | default: | 
|  | fc_frame_free(fp);	/* can't happen */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | return; | 
|  |  | 
|  | reject: | 
|  | els_data.reason = ELS_RJT_UNAB; | 
|  | els_data.explan = ELS_EXPL_PLOGI_REQD; | 
|  | lport->tt.seq_els_rsp_send(fp, ELS_LS_RJT, &els_data); | 
|  | fc_frame_free(fp); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_recv_req() - Handler for requests | 
|  | * @lport: The local port that received the request | 
|  | * @fp:	   The request frame | 
|  | * | 
|  | * Locking Note: Called with the lport lock held. | 
|  | */ | 
|  | static void fc_rport_recv_req(struct fc_lport *lport, struct fc_frame *fp) | 
|  | { | 
|  | struct fc_seq_els_data els_data; | 
|  |  | 
|  | /* | 
|  | * Handle FLOGI, PLOGI and LOGO requests separately, since they | 
|  | * don't require prior login. | 
|  | * Check for unsupported opcodes first and reject them. | 
|  | * For some ops, it would be incorrect to reject with "PLOGI required". | 
|  | */ | 
|  | switch (fc_frame_payload_op(fp)) { | 
|  | case ELS_FLOGI: | 
|  | fc_rport_recv_flogi_req(lport, fp); | 
|  | break; | 
|  | case ELS_PLOGI: | 
|  | fc_rport_recv_plogi_req(lport, fp); | 
|  | break; | 
|  | case ELS_LOGO: | 
|  | fc_rport_recv_logo_req(lport, fp); | 
|  | break; | 
|  | case ELS_PRLI: | 
|  | case ELS_PRLO: | 
|  | case ELS_ADISC: | 
|  | case ELS_RRQ: | 
|  | case ELS_REC: | 
|  | case ELS_RLS: | 
|  | fc_rport_recv_els_req(lport, fp); | 
|  | break; | 
|  | default: | 
|  | els_data.reason = ELS_RJT_UNSUP; | 
|  | els_data.explan = ELS_EXPL_NONE; | 
|  | lport->tt.seq_els_rsp_send(fp, ELS_LS_RJT, &els_data); | 
|  | fc_frame_free(fp); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_recv_plogi_req() - Handler for Port Login (PLOGI) requests | 
|  | * @lport: The local port that received the PLOGI request | 
|  | * @rx_fp: The PLOGI request frame | 
|  | * | 
|  | * Locking Note: The rport lock is held before calling this function. | 
|  | */ | 
|  | static void fc_rport_recv_plogi_req(struct fc_lport *lport, | 
|  | struct fc_frame *rx_fp) | 
|  | { | 
|  | struct fc_disc *disc; | 
|  | struct fc_rport_priv *rdata; | 
|  | struct fc_frame *fp = rx_fp; | 
|  | struct fc_els_flogi *pl; | 
|  | struct fc_seq_els_data rjt_data; | 
|  | u32 sid; | 
|  |  | 
|  | sid = fc_frame_sid(fp); | 
|  |  | 
|  | FC_RPORT_ID_DBG(lport, sid, "Received PLOGI request\n"); | 
|  |  | 
|  | pl = fc_frame_payload_get(fp, sizeof(*pl)); | 
|  | if (!pl) { | 
|  | FC_RPORT_ID_DBG(lport, sid, "Received PLOGI too short\n"); | 
|  | rjt_data.reason = ELS_RJT_PROT; | 
|  | rjt_data.explan = ELS_EXPL_INV_LEN; | 
|  | goto reject; | 
|  | } | 
|  |  | 
|  | disc = &lport->disc; | 
|  | mutex_lock(&disc->disc_mutex); | 
|  | rdata = lport->tt.rport_create(lport, sid); | 
|  | if (!rdata) { | 
|  | mutex_unlock(&disc->disc_mutex); | 
|  | rjt_data.reason = ELS_RJT_UNAB; | 
|  | rjt_data.explan = ELS_EXPL_INSUF_RES; | 
|  | goto reject; | 
|  | } | 
|  |  | 
|  | mutex_lock(&rdata->rp_mutex); | 
|  | mutex_unlock(&disc->disc_mutex); | 
|  |  | 
|  | rdata->ids.port_name = get_unaligned_be64(&pl->fl_wwpn); | 
|  | rdata->ids.node_name = get_unaligned_be64(&pl->fl_wwnn); | 
|  |  | 
|  | /* | 
|  | * If the rport was just created, possibly due to the incoming PLOGI, | 
|  | * set the state appropriately and accept the PLOGI. | 
|  | * | 
|  | * If we had also sent a PLOGI, and if the received PLOGI is from a | 
|  | * higher WWPN, we accept it, otherwise an LS_RJT is sent with reason | 
|  | * "command already in progress". | 
|  | * | 
|  | * XXX TBD: If the session was ready before, the PLOGI should result in | 
|  | * all outstanding exchanges being reset. | 
|  | */ | 
|  | switch (rdata->rp_state) { | 
|  | case RPORT_ST_INIT: | 
|  | FC_RPORT_DBG(rdata, "Received PLOGI in INIT state\n"); | 
|  | break; | 
|  | case RPORT_ST_PLOGI_WAIT: | 
|  | FC_RPORT_DBG(rdata, "Received PLOGI in PLOGI_WAIT state\n"); | 
|  | break; | 
|  | case RPORT_ST_PLOGI: | 
|  | FC_RPORT_DBG(rdata, "Received PLOGI in PLOGI state\n"); | 
|  | if (rdata->ids.port_name < lport->wwpn) { | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | rjt_data.reason = ELS_RJT_INPROG; | 
|  | rjt_data.explan = ELS_EXPL_NONE; | 
|  | goto reject; | 
|  | } | 
|  | break; | 
|  | case RPORT_ST_PRLI: | 
|  | case RPORT_ST_RTV: | 
|  | case RPORT_ST_READY: | 
|  | case RPORT_ST_ADISC: | 
|  | FC_RPORT_DBG(rdata, "Received PLOGI in logged-in state %d " | 
|  | "- ignored for now\n", rdata->rp_state); | 
|  | /* XXX TBD - should reset */ | 
|  | break; | 
|  | case RPORT_ST_FLOGI: | 
|  | case RPORT_ST_DELETE: | 
|  | FC_RPORT_DBG(rdata, "Received PLOGI in state %s - send busy\n", | 
|  | fc_rport_state(rdata)); | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | rjt_data.reason = ELS_RJT_BUSY; | 
|  | rjt_data.explan = ELS_EXPL_NONE; | 
|  | goto reject; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Get session payload size from incoming PLOGI. | 
|  | */ | 
|  | rdata->maxframe_size = fc_plogi_get_maxframe(pl, lport->mfs); | 
|  |  | 
|  | /* | 
|  | * Send LS_ACC.	 If this fails, the originator should retry. | 
|  | */ | 
|  | fp = fc_frame_alloc(lport, sizeof(*pl)); | 
|  | if (!fp) | 
|  | goto out; | 
|  |  | 
|  | fc_plogi_fill(lport, fp, ELS_LS_ACC); | 
|  | fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0); | 
|  | lport->tt.frame_send(lport, fp); | 
|  | fc_rport_enter_prli(rdata); | 
|  | out: | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | fc_frame_free(rx_fp); | 
|  | return; | 
|  |  | 
|  | reject: | 
|  | lport->tt.seq_els_rsp_send(fp, ELS_LS_RJT, &rjt_data); | 
|  | fc_frame_free(fp); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_recv_prli_req() - Handler for process login (PRLI) requests | 
|  | * @rdata: The remote port that sent the PRLI request | 
|  | * @rx_fp: The PRLI request frame | 
|  | * | 
|  | * Locking Note: The rport lock is exected to be held before calling | 
|  | * this function. | 
|  | */ | 
|  | static void fc_rport_recv_prli_req(struct fc_rport_priv *rdata, | 
|  | struct fc_frame *rx_fp) | 
|  | { | 
|  | struct fc_lport *lport = rdata->local_port; | 
|  | struct fc_frame *fp; | 
|  | struct { | 
|  | struct fc_els_prli prli; | 
|  | struct fc_els_spp spp; | 
|  | } *pp; | 
|  | struct fc_els_spp *rspp;	/* request service param page */ | 
|  | struct fc_els_spp *spp;	/* response spp */ | 
|  | unsigned int len; | 
|  | unsigned int plen; | 
|  | enum fc_els_spp_resp resp; | 
|  | enum fc_els_spp_resp passive; | 
|  | struct fc_seq_els_data rjt_data; | 
|  | struct fc4_prov *prov; | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Received PRLI request while in state %s\n", | 
|  | fc_rport_state(rdata)); | 
|  |  | 
|  | len = fr_len(rx_fp) - sizeof(struct fc_frame_header); | 
|  | pp = fc_frame_payload_get(rx_fp, sizeof(*pp)); | 
|  | if (!pp) | 
|  | goto reject_len; | 
|  | plen = ntohs(pp->prli.prli_len); | 
|  | if ((plen % 4) != 0 || plen > len || plen < 16) | 
|  | goto reject_len; | 
|  | if (plen < len) | 
|  | len = plen; | 
|  | plen = pp->prli.prli_spp_len; | 
|  | if ((plen % 4) != 0 || plen < sizeof(*spp) || | 
|  | plen > len || len < sizeof(*pp) || plen < 12) | 
|  | goto reject_len; | 
|  | rspp = &pp->spp; | 
|  |  | 
|  | fp = fc_frame_alloc(lport, len); | 
|  | if (!fp) { | 
|  | rjt_data.reason = ELS_RJT_UNAB; | 
|  | rjt_data.explan = ELS_EXPL_INSUF_RES; | 
|  | goto reject; | 
|  | } | 
|  | pp = fc_frame_payload_get(fp, len); | 
|  | WARN_ON(!pp); | 
|  | memset(pp, 0, len); | 
|  | pp->prli.prli_cmd = ELS_LS_ACC; | 
|  | pp->prli.prli_spp_len = plen; | 
|  | pp->prli.prli_len = htons(len); | 
|  | len -= sizeof(struct fc_els_prli); | 
|  |  | 
|  | /* | 
|  | * Go through all the service parameter pages and build | 
|  | * response.  If plen indicates longer SPP than standard, | 
|  | * use that.  The entire response has been pre-cleared above. | 
|  | */ | 
|  | spp = &pp->spp; | 
|  | mutex_lock(&fc_prov_mutex); | 
|  | while (len >= plen) { | 
|  | rdata->spp_type = rspp->spp_type; | 
|  | spp->spp_type = rspp->spp_type; | 
|  | spp->spp_type_ext = rspp->spp_type_ext; | 
|  | resp = 0; | 
|  |  | 
|  | if (rspp->spp_type < FC_FC4_PROV_SIZE) { | 
|  | prov = fc_active_prov[rspp->spp_type]; | 
|  | if (prov) | 
|  | resp = prov->prli(rdata, plen, rspp, spp); | 
|  | prov = fc_passive_prov[rspp->spp_type]; | 
|  | if (prov) { | 
|  | passive = prov->prli(rdata, plen, rspp, spp); | 
|  | if (!resp || passive == FC_SPP_RESP_ACK) | 
|  | resp = passive; | 
|  | } | 
|  | } | 
|  | if (!resp) { | 
|  | if (spp->spp_flags & FC_SPP_EST_IMG_PAIR) | 
|  | resp |= FC_SPP_RESP_CONF; | 
|  | else | 
|  | resp |= FC_SPP_RESP_INVL; | 
|  | } | 
|  | spp->spp_flags |= resp; | 
|  | len -= plen; | 
|  | rspp = (struct fc_els_spp *)((char *)rspp + plen); | 
|  | spp = (struct fc_els_spp *)((char *)spp + plen); | 
|  | } | 
|  | mutex_unlock(&fc_prov_mutex); | 
|  |  | 
|  | /* | 
|  | * Send LS_ACC.	 If this fails, the originator should retry. | 
|  | */ | 
|  | fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0); | 
|  | lport->tt.frame_send(lport, fp); | 
|  |  | 
|  | switch (rdata->rp_state) { | 
|  | case RPORT_ST_PRLI: | 
|  | fc_rport_enter_ready(rdata); | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | goto drop; | 
|  |  | 
|  | reject_len: | 
|  | rjt_data.reason = ELS_RJT_PROT; | 
|  | rjt_data.explan = ELS_EXPL_INV_LEN; | 
|  | reject: | 
|  | lport->tt.seq_els_rsp_send(rx_fp, ELS_LS_RJT, &rjt_data); | 
|  | drop: | 
|  | fc_frame_free(rx_fp); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_recv_prlo_req() - Handler for process logout (PRLO) requests | 
|  | * @rdata: The remote port that sent the PRLO request | 
|  | * @rx_fp: The PRLO request frame | 
|  | * | 
|  | * Locking Note: The rport lock is exected to be held before calling | 
|  | * this function. | 
|  | */ | 
|  | static void fc_rport_recv_prlo_req(struct fc_rport_priv *rdata, | 
|  | struct fc_frame *rx_fp) | 
|  | { | 
|  | struct fc_lport *lport = rdata->local_port; | 
|  | struct fc_frame *fp; | 
|  | struct { | 
|  | struct fc_els_prlo prlo; | 
|  | struct fc_els_spp spp; | 
|  | } *pp; | 
|  | struct fc_els_spp *rspp;	/* request service param page */ | 
|  | struct fc_els_spp *spp;		/* response spp */ | 
|  | unsigned int len; | 
|  | unsigned int plen; | 
|  | struct fc_seq_els_data rjt_data; | 
|  |  | 
|  | FC_RPORT_DBG(rdata, "Received PRLO request while in state %s\n", | 
|  | fc_rport_state(rdata)); | 
|  |  | 
|  | len = fr_len(rx_fp) - sizeof(struct fc_frame_header); | 
|  | pp = fc_frame_payload_get(rx_fp, sizeof(*pp)); | 
|  | if (!pp) | 
|  | goto reject_len; | 
|  | plen = ntohs(pp->prlo.prlo_len); | 
|  | if (plen != 20) | 
|  | goto reject_len; | 
|  | if (plen < len) | 
|  | len = plen; | 
|  |  | 
|  | rspp = &pp->spp; | 
|  |  | 
|  | fp = fc_frame_alloc(lport, len); | 
|  | if (!fp) { | 
|  | rjt_data.reason = ELS_RJT_UNAB; | 
|  | rjt_data.explan = ELS_EXPL_INSUF_RES; | 
|  | goto reject; | 
|  | } | 
|  |  | 
|  | pp = fc_frame_payload_get(fp, len); | 
|  | WARN_ON(!pp); | 
|  | memset(pp, 0, len); | 
|  | pp->prlo.prlo_cmd = ELS_LS_ACC; | 
|  | pp->prlo.prlo_obs = 0x10; | 
|  | pp->prlo.prlo_len = htons(len); | 
|  | spp = &pp->spp; | 
|  | spp->spp_type = rspp->spp_type; | 
|  | spp->spp_type_ext = rspp->spp_type_ext; | 
|  | spp->spp_flags = FC_SPP_RESP_ACK; | 
|  |  | 
|  | fc_rport_enter_delete(rdata, RPORT_EV_LOGO); | 
|  |  | 
|  | fc_fill_reply_hdr(fp, rx_fp, FC_RCTL_ELS_REP, 0); | 
|  | lport->tt.frame_send(lport, fp); | 
|  | goto drop; | 
|  |  | 
|  | reject_len: | 
|  | rjt_data.reason = ELS_RJT_PROT; | 
|  | rjt_data.explan = ELS_EXPL_INV_LEN; | 
|  | reject: | 
|  | lport->tt.seq_els_rsp_send(rx_fp, ELS_LS_RJT, &rjt_data); | 
|  | drop: | 
|  | fc_frame_free(rx_fp); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_recv_logo_req() - Handler for logout (LOGO) requests | 
|  | * @lport: The local port that received the LOGO request | 
|  | * @fp:	   The LOGO request frame | 
|  | * | 
|  | * Locking Note: The rport lock is exected to be held before calling | 
|  | * this function. | 
|  | */ | 
|  | static void fc_rport_recv_logo_req(struct fc_lport *lport, struct fc_frame *fp) | 
|  | { | 
|  | struct fc_rport_priv *rdata; | 
|  | u32 sid; | 
|  |  | 
|  | lport->tt.seq_els_rsp_send(fp, ELS_LS_ACC, NULL); | 
|  |  | 
|  | sid = fc_frame_sid(fp); | 
|  |  | 
|  | mutex_lock(&lport->disc.disc_mutex); | 
|  | rdata = lport->tt.rport_lookup(lport, sid); | 
|  | if (rdata) { | 
|  | mutex_lock(&rdata->rp_mutex); | 
|  | FC_RPORT_DBG(rdata, "Received LOGO request while in state %s\n", | 
|  | fc_rport_state(rdata)); | 
|  |  | 
|  | fc_rport_enter_delete(rdata, RPORT_EV_LOGO); | 
|  | mutex_unlock(&rdata->rp_mutex); | 
|  | } else | 
|  | FC_RPORT_ID_DBG(lport, sid, | 
|  | "Received LOGO from non-logged-in port\n"); | 
|  | mutex_unlock(&lport->disc.disc_mutex); | 
|  | fc_frame_free(fp); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_flush_queue() - Flush the rport_event_queue | 
|  | */ | 
|  | static void fc_rport_flush_queue(void) | 
|  | { | 
|  | flush_workqueue(rport_event_queue); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_init() - Initialize the remote port layer for a local port | 
|  | * @lport: The local port to initialize the remote port layer for | 
|  | */ | 
|  | int fc_rport_init(struct fc_lport *lport) | 
|  | { | 
|  | if (!lport->tt.rport_lookup) | 
|  | lport->tt.rport_lookup = fc_rport_lookup; | 
|  |  | 
|  | if (!lport->tt.rport_create) | 
|  | lport->tt.rport_create = fc_rport_create; | 
|  |  | 
|  | if (!lport->tt.rport_login) | 
|  | lport->tt.rport_login = fc_rport_login; | 
|  |  | 
|  | if (!lport->tt.rport_logoff) | 
|  | lport->tt.rport_logoff = fc_rport_logoff; | 
|  |  | 
|  | if (!lport->tt.rport_recv_req) | 
|  | lport->tt.rport_recv_req = fc_rport_recv_req; | 
|  |  | 
|  | if (!lport->tt.rport_flush_queue) | 
|  | lport->tt.rport_flush_queue = fc_rport_flush_queue; | 
|  |  | 
|  | if (!lport->tt.rport_destroy) | 
|  | lport->tt.rport_destroy = fc_rport_destroy; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(fc_rport_init); | 
|  |  | 
|  | /** | 
|  | * fc_rport_fcp_prli() - Handle incoming PRLI for the FCP initiator. | 
|  | * @rdata: remote port private | 
|  | * @spp_len: service parameter page length | 
|  | * @rspp: received service parameter page | 
|  | * @spp: response service parameter page | 
|  | * | 
|  | * Returns the value for the response code to be placed in spp_flags; | 
|  | * Returns 0 if not an initiator. | 
|  | */ | 
|  | static int fc_rport_fcp_prli(struct fc_rport_priv *rdata, u32 spp_len, | 
|  | const struct fc_els_spp *rspp, | 
|  | struct fc_els_spp *spp) | 
|  | { | 
|  | struct fc_lport *lport = rdata->local_port; | 
|  | u32 fcp_parm; | 
|  |  | 
|  | fcp_parm = ntohl(rspp->spp_params); | 
|  | rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN; | 
|  | if (fcp_parm & FCP_SPPF_INIT_FCN) | 
|  | rdata->ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR; | 
|  | if (fcp_parm & FCP_SPPF_TARG_FCN) | 
|  | rdata->ids.roles |= FC_RPORT_ROLE_FCP_TARGET; | 
|  | if (fcp_parm & FCP_SPPF_RETRY) | 
|  | rdata->flags |= FC_RP_FLAGS_RETRY; | 
|  | rdata->supported_classes = FC_COS_CLASS3; | 
|  |  | 
|  | if (!(lport->service_params & FCP_SPPF_INIT_FCN)) | 
|  | return 0; | 
|  |  | 
|  | spp->spp_flags |= rspp->spp_flags & FC_SPP_EST_IMG_PAIR; | 
|  |  | 
|  | /* | 
|  | * OR in our service parameters with other providers (target), if any. | 
|  | */ | 
|  | fcp_parm = ntohl(spp->spp_params); | 
|  | spp->spp_params = htonl(fcp_parm | lport->service_params); | 
|  | return FC_SPP_RESP_ACK; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * FC-4 provider ops for FCP initiator. | 
|  | */ | 
|  | struct fc4_prov fc_rport_fcp_init = { | 
|  | .prli = fc_rport_fcp_prli, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * fc_rport_t0_prli() - Handle incoming PRLI parameters for type 0 | 
|  | * @rdata: remote port private | 
|  | * @spp_len: service parameter page length | 
|  | * @rspp: received service parameter page | 
|  | * @spp: response service parameter page | 
|  | */ | 
|  | static int fc_rport_t0_prli(struct fc_rport_priv *rdata, u32 spp_len, | 
|  | const struct fc_els_spp *rspp, | 
|  | struct fc_els_spp *spp) | 
|  | { | 
|  | if (rspp->spp_flags & FC_SPP_EST_IMG_PAIR) | 
|  | return FC_SPP_RESP_INVL; | 
|  | return FC_SPP_RESP_ACK; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * FC-4 provider ops for type 0 service parameters. | 
|  | * | 
|  | * This handles the special case of type 0 which is always successful | 
|  | * but doesn't do anything otherwise. | 
|  | */ | 
|  | struct fc4_prov fc_rport_t0_prov = { | 
|  | .prli = fc_rport_t0_prli, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * fc_setup_rport() - Initialize the rport_event_queue | 
|  | */ | 
|  | int fc_setup_rport(void) | 
|  | { | 
|  | rport_event_queue = create_singlethread_workqueue("fc_rport_eq"); | 
|  | if (!rport_event_queue) | 
|  | return -ENOMEM; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_destroy_rport() - Destroy the rport_event_queue | 
|  | */ | 
|  | void fc_destroy_rport(void) | 
|  | { | 
|  | destroy_workqueue(rport_event_queue); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * fc_rport_terminate_io() - Stop all outstanding I/O on a remote port | 
|  | * @rport: The remote port whose I/O should be terminated | 
|  | */ | 
|  | void fc_rport_terminate_io(struct fc_rport *rport) | 
|  | { | 
|  | struct fc_rport_libfc_priv *rpriv = rport->dd_data; | 
|  | struct fc_lport *lport = rpriv->local_port; | 
|  |  | 
|  | lport->tt.exch_mgr_reset(lport, 0, rport->port_id); | 
|  | lport->tt.exch_mgr_reset(lport, rport->port_id, 0); | 
|  | } | 
|  | EXPORT_SYMBOL(fc_rport_terminate_io); |