arch/powerpc/sysdev/qe_lib/ucc_slow.c - kernel/common - Git at Google

 /*
  * Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
  *
  * Authors: 	Shlomi Gridish <[email protected]>
  * 		Li Yang <[email protected]>
  *
  * Description:
  * QE UCC Slow API Set - UCC Slow specific routines implementations.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
  * Free Software Foundation;  either version 2 of the  License, or (at your
  * option) any later version.
  */
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
 #include <linux/stddef.h>
 #include <linux/interrupt.h>

 #include <asm/io.h>
 #include <asm/immap_qe.h>
 #include <asm/qe.h>

 #include <asm/ucc.h>
 #include <asm/ucc_slow.h>

 u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
 {
 	switch (uccs_num) {
 	case 0: return QE_CR_SUBBLOCK_UCCSLOW1;
 	case 1: return QE_CR_SUBBLOCK_UCCSLOW2;
 	case 2: return QE_CR_SUBBLOCK_UCCSLOW3;
 	case 3: return QE_CR_SUBBLOCK_UCCSLOW4;
 	case 4: return QE_CR_SUBBLOCK_UCCSLOW5;
 	case 5: return QE_CR_SUBBLOCK_UCCSLOW6;
 	case 6: return QE_CR_SUBBLOCK_UCCSLOW7;
 	case 7: return QE_CR_SUBBLOCK_UCCSLOW8;
 	default: return QE_CR_SUBBLOCK_INVALID;
 	}
 }

 void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs)
 {
 	out_be16(&uccs->us_regs->utodr, UCC_SLOW_TOD);
 }

 void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs)
 {
 	struct ucc_slow_info *us_info = uccs->us_info;
 	u32 id;

 	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
 	qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
 			 QE_CR_PROTOCOL_UNSPECIFIED, 0);
 }

 void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
 {
 	struct ucc_slow_info *us_info = uccs->us_info;
 	u32 id;

 	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
 	qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
 }

 void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
 {
 	struct ucc_slow_info *us_info = uccs->us_info;
 	u32 id;

 	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
 	qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
 }

 void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
 {
 	struct ucc_slow *us_regs;
 	u32 gumr_l;

 	us_regs = uccs->us_regs;

 	/* Enable reception and/or transmission on this UCC. */
 	gumr_l = in_be32(&us_regs->gumr_l);
 	if (mode & COMM_DIR_TX) {
 		gumr_l |= UCC_SLOW_GUMR_L_ENT;
 		uccs->enabled_tx = 1;
 	}
 	if (mode & COMM_DIR_RX) {
 		gumr_l |= UCC_SLOW_GUMR_L_ENR;
 		uccs->enabled_rx = 1;
 	}
 	out_be32(&us_regs->gumr_l, gumr_l);
 }

 void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
 {
 	struct ucc_slow *us_regs;
 	u32 gumr_l;

 	us_regs = uccs->us_regs;

 	/* Disable reception and/or transmission on this UCC. */
 	gumr_l = in_be32(&us_regs->gumr_l);
 	if (mode & COMM_DIR_TX) {
 		gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
 		uccs->enabled_tx = 0;
 	}
 	if (mode & COMM_DIR_RX) {
 		gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
 		uccs->enabled_rx = 0;
 	}
 	out_be32(&us_regs->gumr_l, gumr_l);
 }

 int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
 {
 	struct ucc_slow_private *uccs;
 	u32 i;
 	struct ucc_slow *us_regs;
 	u32 gumr;
 	struct qe_bd *bd;
 	u32 id;
 	u32 command;
 	int ret = 0;

 	if (!us_info)
 		return -EINVAL;

 	/* check if the UCC port number is in range. */
 	if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) {
 		printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__);
 		return -EINVAL;
 	}

 	/*
 	 * Set mrblr
 	 * Check that 'max_rx_buf_length' is properly aligned (4), unless
 	 * rfw is 1, meaning that QE accepts one byte at a time, unlike normal
 	 * case when QE accepts 32 bits at a time.
 	 */
 	if ((!us_info->rfw) &&
 		(us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
 		printk(KERN_ERR "max_rx_buf_length not aligned.");
 		return -EINVAL;
 	}

 	uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
 	if (!uccs) {
 		printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__);
 		return -ENOMEM;
 	}

 	/* Fill slow UCC structure */
 	uccs->us_info = us_info;
 	/* Set the PHY base address */
 	uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
 	if (uccs->us_regs == NULL) {
 		printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__);
 		return -ENOMEM;
 	}

 	uccs->saved_uccm = 0;
 	uccs->p_rx_frame = 0;
 	us_regs = uccs->us_regs;
 	uccs->p_ucce = (u16 *) & (us_regs->ucce);
 	uccs->p_uccm = (u16 *) & (us_regs->uccm);
 #ifdef STATISTICS
 	uccs->rx_frames = 0;
 	uccs->tx_frames = 0;
 	uccs->rx_discarded = 0;
 #endif				/* STATISTICS */

 	/* Get PRAM base */
 	uccs->us_pram_offset =
 		qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
 	if (IS_MURAM_ERR(uccs->us_pram_offset)) {
 		printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __FUNCTION__);
 		ucc_slow_free(uccs);
 		return -ENOMEM;
 	}
 	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
 	qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED,
 		     uccs->us_pram_offset);

 	uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);

 	/* Init Guemr register */
 	if ((ret = ucc_init_guemr((struct ucc_common *) us_regs))) {
 		printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__);
 		ucc_slow_free(uccs);
 		return ret;
 	}

 	/* Set UCC to slow type */
 	if ((ret = ucc_set_type(us_info->ucc_num,
 				(struct ucc_common *) us_regs,
 				UCC_SPEED_TYPE_SLOW))) {
 		printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
 		ucc_slow_free(uccs);
 		return ret;
 	}

 	out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length);

 	INIT_LIST_HEAD(&uccs->confQ);

 	/* Allocate BDs. */
 	uccs->rx_base_offset =
 		qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
 				QE_ALIGNMENT_OF_BD);
 	if (IS_MURAM_ERR(uccs->rx_base_offset)) {
 		printk(KERN_ERR "%s: cannot allocate RX BDs", __FUNCTION__);
 		uccs->rx_base_offset = 0;
 		ucc_slow_free(uccs);
 		return -ENOMEM;
 	}

 	uccs->tx_base_offset =
 		qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
 			QE_ALIGNMENT_OF_BD);
 	if (IS_MURAM_ERR(uccs->tx_base_offset)) {
 		printk(KERN_ERR "%s: cannot allocate TX BDs", __FUNCTION__);
 		uccs->tx_base_offset = 0;
 		ucc_slow_free(uccs);
 		return -ENOMEM;
 	}

 	/* Init Tx bds */
 	bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
 	for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) {
 		/* clear bd buffer */
 		out_be32(&bd->buf, 0);
 		/* set bd status and length */
 		out_be32((u32 *) bd, 0);
 		bd++;
 	}
 	/* for last BD set Wrap bit */
 	out_be32(&bd->buf, 0);
 	out_be32((u32 *) bd, cpu_to_be32(T_W));

 	/* Init Rx bds */
 	bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
 	for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) {
 		/* set bd status and length */
 		out_be32((u32*)bd, 0);
 		/* clear bd buffer */
 		out_be32(&bd->buf, 0);
 		bd++;
 	}
 	/* for last BD set Wrap bit */
 	out_be32((u32*)bd, cpu_to_be32(R_W));
 	out_be32(&bd->buf, 0);

 	/* Set GUMR (For more details see the hardware spec.). */
 	/* gumr_h */
 	gumr = us_info->tcrc;
 	if (us_info->cdp)
 		gumr |= UCC_SLOW_GUMR_H_CDP;
 	if (us_info->ctsp)
 		gumr |= UCC_SLOW_GUMR_H_CTSP;
 	if (us_info->cds)
 		gumr |= UCC_SLOW_GUMR_H_CDS;
 	if (us_info->ctss)
 		gumr |= UCC_SLOW_GUMR_H_CTSS;
 	if (us_info->tfl)
 		gumr |= UCC_SLOW_GUMR_H_TFL;
 	if (us_info->rfw)
 		gumr |= UCC_SLOW_GUMR_H_RFW;
 	if (us_info->txsy)
 		gumr |= UCC_SLOW_GUMR_H_TXSY;
 	if (us_info->rtsm)
 		gumr |= UCC_SLOW_GUMR_H_RTSM;
 	out_be32(&us_regs->gumr_h, gumr);

 	/* gumr_l */
 	gumr = us_info->tdcr | us_info->rdcr | us_info->tenc | us_info->renc |
 		us_info->diag | us_info->mode;
 	if (us_info->tci)
 		gumr |= UCC_SLOW_GUMR_L_TCI;
 	if (us_info->rinv)
 		gumr |= UCC_SLOW_GUMR_L_RINV;
 	if (us_info->tinv)
 		gumr |= UCC_SLOW_GUMR_L_TINV;
 	if (us_info->tend)
 		gumr |= UCC_SLOW_GUMR_L_TEND;
 	out_be32(&us_regs->gumr_l, gumr);

 	/* Function code registers */

 	/* if the data is in cachable memory, the 'global' */
 	/* in the function code should be set. */
 	uccs->us_pram->tfcr = uccs->us_pram->rfcr =
 		us_info->data_mem_part | QE_BMR_BYTE_ORDER_BO_MOT;

 	/* rbase, tbase are offsets from MURAM base */
 	out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset);
 	out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset);

 	/* Mux clocking */
 	/* Grant Support */
 	ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
 	/* Breakpoint Support */
 	ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
 	/* Set Tsa or NMSI mode. */
 	ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
 	/* If NMSI (not Tsa), set Tx and Rx clock. */
 	if (!us_info->tsa) {
 		/* Rx clock routing */
 		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
 					COMM_DIR_RX)) {
 			printk(KERN_ERR "%s: illegal value for RX clock",
 			       __FUNCTION__);
 			ucc_slow_free(uccs);
 			return -EINVAL;
 		}
 		/* Tx clock routing */
 		if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
 					COMM_DIR_TX)) {
 			printk(KERN_ERR "%s: illegal value for TX clock",
 			       __FUNCTION__);
 			ucc_slow_free(uccs);
 			return -EINVAL;
 		}
 	}

 	/* Set interrupt mask register at UCC level. */
 	out_be16(&us_regs->uccm, us_info->uccm_mask);

 	/* First, clear anything pending at UCC level,
 	 * otherwise, old garbage may come through
 	 * as soon as the dam is opened. */

 	/* Writing '1' clears */
 	out_be16(&us_regs->ucce, 0xffff);

 	/* Issue QE Init command */
 	if (us_info->init_tx && us_info->init_rx)
 		command = QE_INIT_TX_RX;
 	else if (us_info->init_tx)
 		command = QE_INIT_TX;
 	else
 		command = QE_INIT_RX;	/* We know at least one is TRUE */
 	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
 	qe_issue_cmd(command, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);

 	*uccs_ret = uccs;
 	return 0;
 }

 void ucc_slow_free(struct ucc_slow_private * uccs)
 {
 	if (!uccs)
 		return;

 	if (uccs->rx_base_offset)
 		qe_muram_free(uccs->rx_base_offset);

 	if (uccs->tx_base_offset)
 		qe_muram_free(uccs->tx_base_offset);

 	if (uccs->us_pram) {
 		qe_muram_free(uccs->us_pram_offset);
 		uccs->us_pram = NULL;
 	}

 	kfree(uccs);
 }
	/*
	* Copyright (C) 2006 Freescale Semicondutor, Inc. All rights reserved.
	*
	* Authors: Shlomi Gridish <[email protected]>
	* Li Yang <[email protected]>
	*
	* Description:
	* QE UCC Slow API Set - UCC Slow specific routines implementations.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*/
	#include <linux/kernel.h>
	#include <linux/init.h>
	#include <linux/errno.h>
	#include <linux/slab.h>
	#include <linux/stddef.h>
	#include <linux/interrupt.h>

	#include <asm/io.h>
	#include <asm/immap_qe.h>
	#include <asm/qe.h>

	#include <asm/ucc.h>
	#include <asm/ucc_slow.h>

	u32 ucc_slow_get_qe_cr_subblock(int uccs_num)
	{
	switch (uccs_num) {
	case 0: return QE_CR_SUBBLOCK_UCCSLOW1;
	case 1: return QE_CR_SUBBLOCK_UCCSLOW2;
	case 2: return QE_CR_SUBBLOCK_UCCSLOW3;
	case 3: return QE_CR_SUBBLOCK_UCCSLOW4;
	case 4: return QE_CR_SUBBLOCK_UCCSLOW5;
	case 5: return QE_CR_SUBBLOCK_UCCSLOW6;
	case 6: return QE_CR_SUBBLOCK_UCCSLOW7;
	case 7: return QE_CR_SUBBLOCK_UCCSLOW8;
	default: return QE_CR_SUBBLOCK_INVALID;
	}
	}

	void ucc_slow_poll_transmitter_now(struct ucc_slow_private * uccs)
	{
	out_be16(&uccs->us_regs->utodr, UCC_SLOW_TOD);
	}

	void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs)
	{
	struct ucc_slow_info *us_info = uccs->us_info;
	u32 id;

	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
	qe_issue_cmd(QE_GRACEFUL_STOP_TX, id,
	QE_CR_PROTOCOL_UNSPECIFIED, 0);
	}

	void ucc_slow_stop_tx(struct ucc_slow_private * uccs)
	{
	struct ucc_slow_info *us_info = uccs->us_info;
	u32 id;

	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
	qe_issue_cmd(QE_STOP_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
	}

	void ucc_slow_restart_tx(struct ucc_slow_private * uccs)
	{
	struct ucc_slow_info *us_info = uccs->us_info;
	u32 id;

	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
	qe_issue_cmd(QE_RESTART_TX, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);
	}

	void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode)
	{
	struct ucc_slow *us_regs;
	u32 gumr_l;

	us_regs = uccs->us_regs;

	/* Enable reception and/or transmission on this UCC. */
	gumr_l = in_be32(&us_regs->gumr_l);
	if (mode & COMM_DIR_TX) {
	gumr_l \|= UCC_SLOW_GUMR_L_ENT;
	uccs->enabled_tx = 1;
	}
	if (mode & COMM_DIR_RX) {
	gumr_l \|= UCC_SLOW_GUMR_L_ENR;
	uccs->enabled_rx = 1;
	}
	out_be32(&us_regs->gumr_l, gumr_l);
	}

	void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode)
	{
	struct ucc_slow *us_regs;
	u32 gumr_l;

	us_regs = uccs->us_regs;

	/* Disable reception and/or transmission on this UCC. */
	gumr_l = in_be32(&us_regs->gumr_l);
	if (mode & COMM_DIR_TX) {
	gumr_l &= ~UCC_SLOW_GUMR_L_ENT;
	uccs->enabled_tx = 0;
	}
	if (mode & COMM_DIR_RX) {
	gumr_l &= ~UCC_SLOW_GUMR_L_ENR;
	uccs->enabled_rx = 0;
	}
	out_be32(&us_regs->gumr_l, gumr_l);
	}

	int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret)
	{
	struct ucc_slow_private *uccs;
	u32 i;
	struct ucc_slow *us_regs;
	u32 gumr;
	struct qe_bd *bd;
	u32 id;
	u32 command;
	int ret = 0;

	if (!us_info)
	return -EINVAL;

	/* check if the UCC port number is in range. */
	if ((us_info->ucc_num < 0) \|\| (us_info->ucc_num > UCC_MAX_NUM - 1)) {
	printk(KERN_ERR "%s: illegal UCC number", __FUNCTION__);
	return -EINVAL;
	}

	/*
	* Set mrblr
	* Check that 'max_rx_buf_length' is properly aligned (4), unless
	* rfw is 1, meaning that QE accepts one byte at a time, unlike normal
	* case when QE accepts 32 bits at a time.
	*/
	if ((!us_info->rfw) &&
	(us_info->max_rx_buf_length & (UCC_SLOW_MRBLR_ALIGNMENT - 1))) {
	printk(KERN_ERR "max_rx_buf_length not aligned.");
	return -EINVAL;
	}

	uccs = kzalloc(sizeof(struct ucc_slow_private), GFP_KERNEL);
	if (!uccs) {
	printk(KERN_ERR "%s: Cannot allocate private data", __FUNCTION__);
	return -ENOMEM;
	}

	/* Fill slow UCC structure */
	uccs->us_info = us_info;
	/* Set the PHY base address */
	uccs->us_regs = ioremap(us_info->regs, sizeof(struct ucc_slow));
	if (uccs->us_regs == NULL) {
	printk(KERN_ERR "%s: Cannot map UCC registers", __FUNCTION__);
	return -ENOMEM;
	}

	uccs->saved_uccm = 0;
	uccs->p_rx_frame = 0;
	us_regs = uccs->us_regs;
	uccs->p_ucce = (u16 *) & (us_regs->ucce);
	uccs->p_uccm = (u16 *) & (us_regs->uccm);
	#ifdef STATISTICS
	uccs->rx_frames = 0;
	uccs->tx_frames = 0;
	uccs->rx_discarded = 0;
	#endif /* STATISTICS */

	/* Get PRAM base */
	uccs->us_pram_offset =
	qe_muram_alloc(UCC_SLOW_PRAM_SIZE, ALIGNMENT_OF_UCC_SLOW_PRAM);
	if (IS_MURAM_ERR(uccs->us_pram_offset)) {
	printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __FUNCTION__);
	ucc_slow_free(uccs);
	return -ENOMEM;
	}
	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
	qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, id, QE_CR_PROTOCOL_UNSPECIFIED,
	uccs->us_pram_offset);

	uccs->us_pram = qe_muram_addr(uccs->us_pram_offset);

	/* Init Guemr register */
	if ((ret = ucc_init_guemr((struct ucc_common *) us_regs))) {
	printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__);
	ucc_slow_free(uccs);
	return ret;
	}

	/* Set UCC to slow type */
	if ((ret = ucc_set_type(us_info->ucc_num,
	(struct ucc_common *) us_regs,
	UCC_SPEED_TYPE_SLOW))) {
	printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__);
	ucc_slow_free(uccs);
	return ret;
	}

	out_be16(&uccs->us_pram->mrblr, us_info->max_rx_buf_length);

	INIT_LIST_HEAD(&uccs->confQ);

	/* Allocate BDs. */
	uccs->rx_base_offset =
	qe_muram_alloc(us_info->rx_bd_ring_len * sizeof(struct qe_bd),
	QE_ALIGNMENT_OF_BD);
	if (IS_MURAM_ERR(uccs->rx_base_offset)) {
	printk(KERN_ERR "%s: cannot allocate RX BDs", __FUNCTION__);
	uccs->rx_base_offset = 0;
	ucc_slow_free(uccs);
	return -ENOMEM;
	}

	uccs->tx_base_offset =
	qe_muram_alloc(us_info->tx_bd_ring_len * sizeof(struct qe_bd),
	QE_ALIGNMENT_OF_BD);
	if (IS_MURAM_ERR(uccs->tx_base_offset)) {
	printk(KERN_ERR "%s: cannot allocate TX BDs", __FUNCTION__);
	uccs->tx_base_offset = 0;
	ucc_slow_free(uccs);
	return -ENOMEM;
	}

	/* Init Tx bds */
	bd = uccs->confBd = uccs->tx_bd = qe_muram_addr(uccs->tx_base_offset);
	for (i = 0; i < us_info->tx_bd_ring_len - 1; i++) {
	/* clear bd buffer */
	out_be32(&bd->buf, 0);
	/* set bd status and length */
	out_be32((u32 *) bd, 0);
	bd++;
	}
	/* for last BD set Wrap bit */
	out_be32(&bd->buf, 0);
	out_be32((u32 *) bd, cpu_to_be32(T_W));

	/* Init Rx bds */
	bd = uccs->rx_bd = qe_muram_addr(uccs->rx_base_offset);
	for (i = 0; i < us_info->rx_bd_ring_len - 1; i++) {
	/* set bd status and length */
	out_be32((u32*)bd, 0);
	/* clear bd buffer */
	out_be32(&bd->buf, 0);
	bd++;
	}
	/* for last BD set Wrap bit */
	out_be32((u32*)bd, cpu_to_be32(R_W));
	out_be32(&bd->buf, 0);

	/* Set GUMR (For more details see the hardware spec.). */
	/* gumr_h */
	gumr = us_info->tcrc;
	if (us_info->cdp)
	gumr \|= UCC_SLOW_GUMR_H_CDP;
	if (us_info->ctsp)
	gumr \|= UCC_SLOW_GUMR_H_CTSP;
	if (us_info->cds)
	gumr \|= UCC_SLOW_GUMR_H_CDS;
	if (us_info->ctss)
	gumr \|= UCC_SLOW_GUMR_H_CTSS;
	if (us_info->tfl)
	gumr \|= UCC_SLOW_GUMR_H_TFL;
	if (us_info->rfw)
	gumr \|= UCC_SLOW_GUMR_H_RFW;
	if (us_info->txsy)
	gumr \|= UCC_SLOW_GUMR_H_TXSY;
	if (us_info->rtsm)
	gumr \|= UCC_SLOW_GUMR_H_RTSM;
	out_be32(&us_regs->gumr_h, gumr);

	/* gumr_l */
	gumr = us_info->tdcr \| us_info->rdcr \| us_info->tenc \| us_info->renc \|
	us_info->diag \| us_info->mode;
	if (us_info->tci)
	gumr \|= UCC_SLOW_GUMR_L_TCI;
	if (us_info->rinv)
	gumr \|= UCC_SLOW_GUMR_L_RINV;
	if (us_info->tinv)
	gumr \|= UCC_SLOW_GUMR_L_TINV;
	if (us_info->tend)
	gumr \|= UCC_SLOW_GUMR_L_TEND;
	out_be32(&us_regs->gumr_l, gumr);

	/* Function code registers */

	/* if the data is in cachable memory, the 'global' */
	/* in the function code should be set. */
	uccs->us_pram->tfcr = uccs->us_pram->rfcr =
	us_info->data_mem_part \| QE_BMR_BYTE_ORDER_BO_MOT;

	/* rbase, tbase are offsets from MURAM base */
	out_be16(&uccs->us_pram->rbase, uccs->us_pram_offset);
	out_be16(&uccs->us_pram->tbase, uccs->us_pram_offset);

	/* Mux clocking */
	/* Grant Support */
	ucc_set_qe_mux_grant(us_info->ucc_num, us_info->grant_support);
	/* Breakpoint Support */
	ucc_set_qe_mux_bkpt(us_info->ucc_num, us_info->brkpt_support);
	/* Set Tsa or NMSI mode. */
	ucc_set_qe_mux_tsa(us_info->ucc_num, us_info->tsa);
	/* If NMSI (not Tsa), set Tx and Rx clock. */
	if (!us_info->tsa) {
	/* Rx clock routing */
	if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->rx_clock,
	COMM_DIR_RX)) {
	printk(KERN_ERR "%s: illegal value for RX clock",
	__FUNCTION__);
	ucc_slow_free(uccs);
	return -EINVAL;
	}
	/* Tx clock routing */
	if (ucc_set_qe_mux_rxtx(us_info->ucc_num, us_info->tx_clock,
	COMM_DIR_TX)) {
	printk(KERN_ERR "%s: illegal value for TX clock",
	__FUNCTION__);
	ucc_slow_free(uccs);
	return -EINVAL;
	}
	}

	/* Set interrupt mask register at UCC level. */
	out_be16(&us_regs->uccm, us_info->uccm_mask);

	/* First, clear anything pending at UCC level,
	* otherwise, old garbage may come through
	* as soon as the dam is opened. */

	/* Writing '1' clears */
	out_be16(&us_regs->ucce, 0xffff);

	/* Issue QE Init command */
	if (us_info->init_tx && us_info->init_rx)
	command = QE_INIT_TX_RX;
	else if (us_info->init_tx)
	command = QE_INIT_TX;
	else
	command = QE_INIT_RX; /* We know at least one is TRUE */
	id = ucc_slow_get_qe_cr_subblock(us_info->ucc_num);
	qe_issue_cmd(command, id, QE_CR_PROTOCOL_UNSPECIFIED, 0);

	*uccs_ret = uccs;
	return 0;
	}

	void ucc_slow_free(struct ucc_slow_private * uccs)
	{
	if (!uccs)
	return;

	if (uccs->rx_base_offset)
	qe_muram_free(uccs->rx_base_offset);

	if (uccs->tx_base_offset)
	qe_muram_free(uccs->tx_base_offset);

	if (uccs->us_pram) {
	qe_muram_free(uccs->us_pram_offset);
	uccs->us_pram = NULL;
	}

	kfree(uccs);
	}