|  | /* | 
|  | * Copyright (C) 2015 Texas Instruments | 
|  | * Author: Jyri Sarha <[email protected]> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of the GNU General Public License version 2 as published by | 
|  | * the Free Software Foundation. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/component.h> | 
|  | #include <linux/of_graph.h> | 
|  | #include <drm/drm_atomic_helper.h> | 
|  | #include <drm/drm_of.h> | 
|  |  | 
|  | #include "tilcdc_drv.h" | 
|  | #include "tilcdc_external.h" | 
|  |  | 
|  | static const struct tilcdc_panel_info panel_info_tda998x = { | 
|  | .ac_bias                = 255, | 
|  | .ac_bias_intrpt         = 0, | 
|  | .dma_burst_sz           = 16, | 
|  | .bpp                    = 16, | 
|  | .fdd                    = 0x80, | 
|  | .tft_alt_mode           = 0, | 
|  | .invert_pxl_clk		= 1, | 
|  | .sync_edge              = 1, | 
|  | .sync_ctrl              = 1, | 
|  | .raster_order           = 0, | 
|  | }; | 
|  |  | 
|  | static const struct tilcdc_panel_info panel_info_default = { | 
|  | .ac_bias                = 255, | 
|  | .ac_bias_intrpt         = 0, | 
|  | .dma_burst_sz           = 16, | 
|  | .bpp                    = 16, | 
|  | .fdd                    = 0x80, | 
|  | .tft_alt_mode           = 0, | 
|  | .sync_edge              = 0, | 
|  | .sync_ctrl              = 1, | 
|  | .raster_order           = 0, | 
|  | }; | 
|  |  | 
|  | static int tilcdc_external_mode_valid(struct drm_connector *connector, | 
|  | struct drm_display_mode *mode) | 
|  | { | 
|  | struct tilcdc_drm_private *priv = connector->dev->dev_private; | 
|  | int ret; | 
|  |  | 
|  | ret = tilcdc_crtc_mode_valid(priv->crtc, mode); | 
|  | if (ret != MODE_OK) | 
|  | return ret; | 
|  |  | 
|  | BUG_ON(priv->external_connector != connector); | 
|  | BUG_ON(!priv->connector_funcs); | 
|  |  | 
|  | /* If the connector has its own mode_valid call it. */ | 
|  | if (!IS_ERR(priv->connector_funcs) && | 
|  | priv->connector_funcs->mode_valid) | 
|  | return priv->connector_funcs->mode_valid(connector, mode); | 
|  |  | 
|  | return MODE_OK; | 
|  | } | 
|  |  | 
|  | static int tilcdc_add_external_connector(struct drm_device *dev, | 
|  | struct drm_connector *connector) | 
|  | { | 
|  | struct tilcdc_drm_private *priv = dev->dev_private; | 
|  | struct drm_connector_helper_funcs *connector_funcs; | 
|  |  | 
|  | /* There should never be more than one connector */ | 
|  | if (WARN_ON(priv->external_connector)) | 
|  | return -EINVAL; | 
|  |  | 
|  | priv->external_connector = connector; | 
|  | connector_funcs = devm_kzalloc(dev->dev, sizeof(*connector_funcs), | 
|  | GFP_KERNEL); | 
|  | if (!connector_funcs) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* connector->helper_private contains always struct | 
|  | * connector_helper_funcs pointer. For tilcdc crtc to have a | 
|  | * say if a specific mode is Ok, we need to install our own | 
|  | * helper functions. In our helper functions we copy | 
|  | * everything else but use our own mode_valid() (above). | 
|  | */ | 
|  | if (connector->helper_private) { | 
|  | priv->connector_funcs =	connector->helper_private; | 
|  | *connector_funcs = *priv->connector_funcs; | 
|  | } else { | 
|  | priv->connector_funcs = ERR_PTR(-ENOENT); | 
|  | } | 
|  | connector_funcs->mode_valid = tilcdc_external_mode_valid; | 
|  | drm_connector_helper_add(connector, connector_funcs); | 
|  |  | 
|  | dev_dbg(dev->dev, "External connector '%s' connected\n", | 
|  | connector->name); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static | 
|  | struct drm_connector *tilcdc_encoder_find_connector(struct drm_device *ddev, | 
|  | struct drm_encoder *encoder) | 
|  | { | 
|  | struct drm_connector *connector; | 
|  |  | 
|  | list_for_each_entry(connector, &ddev->mode_config.connector_list, head) { | 
|  | if (drm_connector_has_possible_encoder(connector, encoder)) | 
|  | return connector; | 
|  | } | 
|  |  | 
|  | dev_err(ddev->dev, "No connector found for %s encoder (id %d)\n", | 
|  | encoder->name, encoder->base.id); | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | int tilcdc_add_component_encoder(struct drm_device *ddev) | 
|  | { | 
|  | struct tilcdc_drm_private *priv = ddev->dev_private; | 
|  | struct drm_connector *connector; | 
|  | struct drm_encoder *encoder; | 
|  |  | 
|  | list_for_each_entry(encoder, &ddev->mode_config.encoder_list, head) | 
|  | if (encoder->possible_crtcs & (1 << priv->crtc->index)) | 
|  | break; | 
|  |  | 
|  | if (!encoder) { | 
|  | dev_err(ddev->dev, "%s: No suitable encoder found\n", __func__); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | connector = tilcdc_encoder_find_connector(ddev, encoder); | 
|  |  | 
|  | if (!connector) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* Only tda998x is supported at the moment. */ | 
|  | tilcdc_crtc_set_simulate_vesa_sync(priv->crtc, true); | 
|  | tilcdc_crtc_set_panel_info(priv->crtc, &panel_info_tda998x); | 
|  |  | 
|  | return tilcdc_add_external_connector(ddev, connector); | 
|  | } | 
|  |  | 
|  | void tilcdc_remove_external_device(struct drm_device *dev) | 
|  | { | 
|  | struct tilcdc_drm_private *priv = dev->dev_private; | 
|  |  | 
|  | /* Restore the original helper functions, if any. */ | 
|  | if (IS_ERR(priv->connector_funcs)) | 
|  | drm_connector_helper_add(priv->external_connector, NULL); | 
|  | else if (priv->connector_funcs) | 
|  | drm_connector_helper_add(priv->external_connector, | 
|  | priv->connector_funcs); | 
|  | } | 
|  |  | 
|  | static const struct drm_encoder_funcs tilcdc_external_encoder_funcs = { | 
|  | .destroy	= drm_encoder_cleanup, | 
|  | }; | 
|  |  | 
|  | static | 
|  | int tilcdc_attach_bridge(struct drm_device *ddev, struct drm_bridge *bridge) | 
|  | { | 
|  | struct tilcdc_drm_private *priv = ddev->dev_private; | 
|  | struct drm_connector *connector; | 
|  | int ret; | 
|  |  | 
|  | priv->external_encoder->possible_crtcs = BIT(0); | 
|  |  | 
|  | ret = drm_bridge_attach(priv->external_encoder, bridge, NULL); | 
|  | if (ret) { | 
|  | dev_err(ddev->dev, "drm_bridge_attach() failed %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | tilcdc_crtc_set_panel_info(priv->crtc, &panel_info_default); | 
|  |  | 
|  | connector = tilcdc_encoder_find_connector(ddev, priv->external_encoder); | 
|  | if (!connector) | 
|  | return -ENODEV; | 
|  |  | 
|  | ret = tilcdc_add_external_connector(ddev, connector); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int tilcdc_attach_external_device(struct drm_device *ddev) | 
|  | { | 
|  | struct tilcdc_drm_private *priv = ddev->dev_private; | 
|  | struct drm_bridge *bridge; | 
|  | struct drm_panel *panel; | 
|  | int ret; | 
|  |  | 
|  | ret = drm_of_find_panel_or_bridge(ddev->dev->of_node, 0, 0, | 
|  | &panel, &bridge); | 
|  | if (ret == -ENODEV) | 
|  | return 0; | 
|  | else if (ret) | 
|  | return ret; | 
|  |  | 
|  | priv->external_encoder = devm_kzalloc(ddev->dev, | 
|  | sizeof(*priv->external_encoder), | 
|  | GFP_KERNEL); | 
|  | if (!priv->external_encoder) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret = drm_encoder_init(ddev, priv->external_encoder, | 
|  | &tilcdc_external_encoder_funcs, | 
|  | DRM_MODE_ENCODER_NONE, NULL); | 
|  | if (ret) { | 
|  | dev_err(ddev->dev, "drm_encoder_init() failed %d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (panel) { | 
|  | bridge = devm_drm_panel_bridge_add(ddev->dev, panel, | 
|  | DRM_MODE_CONNECTOR_DPI); | 
|  | if (IS_ERR(bridge)) { | 
|  | ret = PTR_ERR(bridge); | 
|  | goto err_encoder_cleanup; | 
|  | } | 
|  | } | 
|  |  | 
|  | ret = tilcdc_attach_bridge(ddev, bridge); | 
|  | if (ret) | 
|  | goto err_encoder_cleanup; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_encoder_cleanup: | 
|  | drm_encoder_cleanup(priv->external_encoder); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int dev_match_of(struct device *dev, void *data) | 
|  | { | 
|  | return dev->of_node == data; | 
|  | } | 
|  |  | 
|  | int tilcdc_get_external_components(struct device *dev, | 
|  | struct component_match **match) | 
|  | { | 
|  | struct device_node *node; | 
|  |  | 
|  | node = of_graph_get_remote_node(dev->of_node, 0, 0); | 
|  |  | 
|  | if (!of_device_is_compatible(node, "nxp,tda998x")) { | 
|  | of_node_put(node); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (match) | 
|  | drm_of_component_match_add(dev, match, dev_match_of, node); | 
|  | of_node_put(node); | 
|  | return 1; | 
|  | } |