|  | // SPDX-License-Identifier: GPL-2.0 | 
|  | /* | 
|  | * PCI Message Signaled Interrupt (MSI) | 
|  | * | 
|  | * Copyright (C) 2003-2004 Intel | 
|  | * Copyright (C) Tom Long Nguyen ([email protected]) | 
|  | * Copyright (C) 2016 Christoph Hellwig. | 
|  | */ | 
|  |  | 
|  | #include <linux/err.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/export.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/proc_fs.h> | 
|  | #include <linux/msi.h> | 
|  | #include <linux/smp.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/acpi_iort.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/irqdomain.h> | 
|  | #include <linux/of_irq.h> | 
|  |  | 
|  | #include "pci.h" | 
|  |  | 
|  | static int pci_msi_enable = 1; | 
|  | int pci_msi_ignore_mask; | 
|  |  | 
|  | #define msix_table_size(flags)	((flags & PCI_MSIX_FLAGS_QSIZE) + 1) | 
|  |  | 
|  | #ifdef CONFIG_PCI_MSI_IRQ_DOMAIN | 
|  | static int pci_msi_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) | 
|  | { | 
|  | struct irq_domain *domain; | 
|  |  | 
|  | domain = dev_get_msi_domain(&dev->dev); | 
|  | if (domain && irq_domain_is_hierarchy(domain)) | 
|  | return msi_domain_alloc_irqs(domain, &dev->dev, nvec); | 
|  |  | 
|  | return arch_setup_msi_irqs(dev, nvec, type); | 
|  | } | 
|  |  | 
|  | static void pci_msi_teardown_msi_irqs(struct pci_dev *dev) | 
|  | { | 
|  | struct irq_domain *domain; | 
|  |  | 
|  | domain = dev_get_msi_domain(&dev->dev); | 
|  | if (domain && irq_domain_is_hierarchy(domain)) | 
|  | msi_domain_free_irqs(domain, &dev->dev); | 
|  | else | 
|  | arch_teardown_msi_irqs(dev); | 
|  | } | 
|  | #else | 
|  | #define pci_msi_setup_msi_irqs		arch_setup_msi_irqs | 
|  | #define pci_msi_teardown_msi_irqs	arch_teardown_msi_irqs | 
|  | #endif | 
|  |  | 
|  | /* Arch hooks */ | 
|  |  | 
|  | int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) | 
|  | { | 
|  | struct msi_controller *chip = dev->bus->msi; | 
|  | int err; | 
|  |  | 
|  | if (!chip || !chip->setup_irq) | 
|  | return -EINVAL; | 
|  |  | 
|  | err = chip->setup_irq(chip, dev, desc); | 
|  | if (err < 0) | 
|  | return err; | 
|  |  | 
|  | irq_set_chip_data(desc->irq, chip); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void __weak arch_teardown_msi_irq(unsigned int irq) | 
|  | { | 
|  | struct msi_controller *chip = irq_get_chip_data(irq); | 
|  |  | 
|  | if (!chip || !chip->teardown_irq) | 
|  | return; | 
|  |  | 
|  | chip->teardown_irq(chip, irq); | 
|  | } | 
|  |  | 
|  | int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) | 
|  | { | 
|  | struct msi_controller *chip = dev->bus->msi; | 
|  | struct msi_desc *entry; | 
|  | int ret; | 
|  |  | 
|  | if (chip && chip->setup_irqs) | 
|  | return chip->setup_irqs(chip, dev, nvec, type); | 
|  | /* | 
|  | * If an architecture wants to support multiple MSI, it needs to | 
|  | * override arch_setup_msi_irqs() | 
|  | */ | 
|  | if (type == PCI_CAP_ID_MSI && nvec > 1) | 
|  | return 1; | 
|  |  | 
|  | for_each_pci_msi_entry(entry, dev) { | 
|  | ret = arch_setup_msi_irq(dev, entry); | 
|  | if (ret < 0) | 
|  | return ret; | 
|  | if (ret > 0) | 
|  | return -ENOSPC; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * We have a default implementation available as a separate non-weak | 
|  | * function, as it is used by the Xen x86 PCI code | 
|  | */ | 
|  | void default_teardown_msi_irqs(struct pci_dev *dev) | 
|  | { | 
|  | int i; | 
|  | struct msi_desc *entry; | 
|  |  | 
|  | for_each_pci_msi_entry(entry, dev) | 
|  | if (entry->irq) | 
|  | for (i = 0; i < entry->nvec_used; i++) | 
|  | arch_teardown_msi_irq(entry->irq + i); | 
|  | } | 
|  |  | 
|  | void __weak arch_teardown_msi_irqs(struct pci_dev *dev) | 
|  | { | 
|  | return default_teardown_msi_irqs(dev); | 
|  | } | 
|  |  | 
|  | static void default_restore_msi_irq(struct pci_dev *dev, int irq) | 
|  | { | 
|  | struct msi_desc *entry; | 
|  |  | 
|  | entry = NULL; | 
|  | if (dev->msix_enabled) { | 
|  | for_each_pci_msi_entry(entry, dev) { | 
|  | if (irq == entry->irq) | 
|  | break; | 
|  | } | 
|  | } else if (dev->msi_enabled)  { | 
|  | entry = irq_get_msi_desc(irq); | 
|  | } | 
|  |  | 
|  | if (entry) | 
|  | __pci_write_msi_msg(entry, &entry->msg); | 
|  | } | 
|  |  | 
|  | void __weak arch_restore_msi_irqs(struct pci_dev *dev) | 
|  | { | 
|  | return default_restore_msi_irqs(dev); | 
|  | } | 
|  |  | 
|  | static inline __attribute_const__ u32 msi_mask(unsigned x) | 
|  | { | 
|  | /* Don't shift by >= width of type */ | 
|  | if (x >= 5) | 
|  | return 0xffffffff; | 
|  | return (1 << (1 << x)) - 1; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * PCI 2.3 does not specify mask bits for each MSI interrupt.  Attempting to | 
|  | * mask all MSI interrupts by clearing the MSI enable bit does not work | 
|  | * reliably as devices without an INTx disable bit will then generate a | 
|  | * level IRQ which will never be cleared. | 
|  | */ | 
|  | u32 __pci_msi_desc_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) | 
|  | { | 
|  | u32 mask_bits = desc->masked; | 
|  |  | 
|  | if (pci_msi_ignore_mask || !desc->msi_attrib.maskbit) | 
|  | return 0; | 
|  |  | 
|  | mask_bits &= ~mask; | 
|  | mask_bits |= flag; | 
|  | pci_write_config_dword(msi_desc_to_pci_dev(desc), desc->mask_pos, | 
|  | mask_bits); | 
|  |  | 
|  | return mask_bits; | 
|  | } | 
|  |  | 
|  | static void msi_mask_irq(struct msi_desc *desc, u32 mask, u32 flag) | 
|  | { | 
|  | desc->masked = __pci_msi_desc_mask_irq(desc, mask, flag); | 
|  | } | 
|  |  | 
|  | static void __iomem *pci_msix_desc_addr(struct msi_desc *desc) | 
|  | { | 
|  | if (desc->msi_attrib.is_virtual) | 
|  | return NULL; | 
|  |  | 
|  | return desc->mask_base + | 
|  | desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This internal function does not flush PCI writes to the device. | 
|  | * All users must ensure that they read from the device before either | 
|  | * assuming that the device state is up to date, or returning out of this | 
|  | * file.  This saves a few milliseconds when initialising devices with lots | 
|  | * of MSI-X interrupts. | 
|  | */ | 
|  | u32 __pci_msix_desc_mask_irq(struct msi_desc *desc, u32 flag) | 
|  | { | 
|  | u32 mask_bits = desc->masked; | 
|  | void __iomem *desc_addr; | 
|  |  | 
|  | if (pci_msi_ignore_mask) | 
|  | return 0; | 
|  | desc_addr = pci_msix_desc_addr(desc); | 
|  | if (!desc_addr) | 
|  | return 0; | 
|  |  | 
|  | mask_bits &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT; | 
|  | if (flag) | 
|  | mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT; | 
|  |  | 
|  | writel(mask_bits, desc_addr + PCI_MSIX_ENTRY_VECTOR_CTRL); | 
|  |  | 
|  | return mask_bits; | 
|  | } | 
|  |  | 
|  | static void msix_mask_irq(struct msi_desc *desc, u32 flag) | 
|  | { | 
|  | desc->masked = __pci_msix_desc_mask_irq(desc, flag); | 
|  | } | 
|  |  | 
|  | static void msi_set_mask_bit(struct irq_data *data, u32 flag) | 
|  | { | 
|  | struct msi_desc *desc = irq_data_get_msi_desc(data); | 
|  |  | 
|  | if (desc->msi_attrib.is_msix) { | 
|  | msix_mask_irq(desc, flag); | 
|  | readl(desc->mask_base);		/* Flush write to device */ | 
|  | } else { | 
|  | unsigned offset = data->irq - desc->irq; | 
|  | msi_mask_irq(desc, 1 << offset, flag << offset); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_msi_mask_irq - Generic IRQ chip callback to mask PCI/MSI interrupts | 
|  | * @data:	pointer to irqdata associated to that interrupt | 
|  | */ | 
|  | void pci_msi_mask_irq(struct irq_data *data) | 
|  | { | 
|  | msi_set_mask_bit(data, 1); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pci_msi_mask_irq); | 
|  |  | 
|  | /** | 
|  | * pci_msi_unmask_irq - Generic IRQ chip callback to unmask PCI/MSI interrupts | 
|  | * @data:	pointer to irqdata associated to that interrupt | 
|  | */ | 
|  | void pci_msi_unmask_irq(struct irq_data *data) | 
|  | { | 
|  | msi_set_mask_bit(data, 0); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pci_msi_unmask_irq); | 
|  |  | 
|  | void default_restore_msi_irqs(struct pci_dev *dev) | 
|  | { | 
|  | struct msi_desc *entry; | 
|  |  | 
|  | for_each_pci_msi_entry(entry, dev) | 
|  | default_restore_msi_irq(dev, entry->irq); | 
|  | } | 
|  |  | 
|  | void __pci_read_msi_msg(struct msi_desc *entry, struct msi_msg *msg) | 
|  | { | 
|  | struct pci_dev *dev = msi_desc_to_pci_dev(entry); | 
|  |  | 
|  | BUG_ON(dev->current_state != PCI_D0); | 
|  |  | 
|  | if (entry->msi_attrib.is_msix) { | 
|  | void __iomem *base = pci_msix_desc_addr(entry); | 
|  |  | 
|  | if (!base) { | 
|  | WARN_ON(1); | 
|  | return; | 
|  | } | 
|  |  | 
|  | msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR); | 
|  | msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR); | 
|  | msg->data = readl(base + PCI_MSIX_ENTRY_DATA); | 
|  | } else { | 
|  | int pos = dev->msi_cap; | 
|  | u16 data; | 
|  |  | 
|  | pci_read_config_dword(dev, pos + PCI_MSI_ADDRESS_LO, | 
|  | &msg->address_lo); | 
|  | if (entry->msi_attrib.is_64) { | 
|  | pci_read_config_dword(dev, pos + PCI_MSI_ADDRESS_HI, | 
|  | &msg->address_hi); | 
|  | pci_read_config_word(dev, pos + PCI_MSI_DATA_64, &data); | 
|  | } else { | 
|  | msg->address_hi = 0; | 
|  | pci_read_config_word(dev, pos + PCI_MSI_DATA_32, &data); | 
|  | } | 
|  | msg->data = data; | 
|  | } | 
|  | } | 
|  |  | 
|  | void __pci_write_msi_msg(struct msi_desc *entry, struct msi_msg *msg) | 
|  | { | 
|  | struct pci_dev *dev = msi_desc_to_pci_dev(entry); | 
|  |  | 
|  | if (dev->current_state != PCI_D0 || pci_dev_is_disconnected(dev)) { | 
|  | /* Don't touch the hardware now */ | 
|  | } else if (entry->msi_attrib.is_msix) { | 
|  | void __iomem *base = pci_msix_desc_addr(entry); | 
|  |  | 
|  | if (!base) | 
|  | goto skip; | 
|  |  | 
|  | writel(msg->address_lo, base + PCI_MSIX_ENTRY_LOWER_ADDR); | 
|  | writel(msg->address_hi, base + PCI_MSIX_ENTRY_UPPER_ADDR); | 
|  | writel(msg->data, base + PCI_MSIX_ENTRY_DATA); | 
|  | } else { | 
|  | int pos = dev->msi_cap; | 
|  | u16 msgctl; | 
|  |  | 
|  | pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &msgctl); | 
|  | msgctl &= ~PCI_MSI_FLAGS_QSIZE; | 
|  | msgctl |= entry->msi_attrib.multiple << 4; | 
|  | pci_write_config_word(dev, pos + PCI_MSI_FLAGS, msgctl); | 
|  |  | 
|  | pci_write_config_dword(dev, pos + PCI_MSI_ADDRESS_LO, | 
|  | msg->address_lo); | 
|  | if (entry->msi_attrib.is_64) { | 
|  | pci_write_config_dword(dev, pos + PCI_MSI_ADDRESS_HI, | 
|  | msg->address_hi); | 
|  | pci_write_config_word(dev, pos + PCI_MSI_DATA_64, | 
|  | msg->data); | 
|  | } else { | 
|  | pci_write_config_word(dev, pos + PCI_MSI_DATA_32, | 
|  | msg->data); | 
|  | } | 
|  | } | 
|  |  | 
|  | skip: | 
|  | entry->msg = *msg; | 
|  |  | 
|  | if (entry->write_msi_msg) | 
|  | entry->write_msi_msg(entry, entry->write_msi_msg_data); | 
|  |  | 
|  | } | 
|  |  | 
|  | void pci_write_msi_msg(unsigned int irq, struct msi_msg *msg) | 
|  | { | 
|  | struct msi_desc *entry = irq_get_msi_desc(irq); | 
|  |  | 
|  | __pci_write_msi_msg(entry, msg); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pci_write_msi_msg); | 
|  |  | 
|  | static void free_msi_irqs(struct pci_dev *dev) | 
|  | { | 
|  | struct list_head *msi_list = dev_to_msi_list(&dev->dev); | 
|  | struct msi_desc *entry, *tmp; | 
|  | struct attribute **msi_attrs; | 
|  | struct device_attribute *dev_attr; | 
|  | int i, count = 0; | 
|  |  | 
|  | for_each_pci_msi_entry(entry, dev) | 
|  | if (entry->irq) | 
|  | for (i = 0; i < entry->nvec_used; i++) | 
|  | BUG_ON(irq_has_action(entry->irq + i)); | 
|  |  | 
|  | pci_msi_teardown_msi_irqs(dev); | 
|  |  | 
|  | list_for_each_entry_safe(entry, tmp, msi_list, list) { | 
|  | if (entry->msi_attrib.is_msix) { | 
|  | if (list_is_last(&entry->list, msi_list)) | 
|  | iounmap(entry->mask_base); | 
|  | } | 
|  |  | 
|  | list_del(&entry->list); | 
|  | free_msi_entry(entry); | 
|  | } | 
|  |  | 
|  | if (dev->msi_irq_groups) { | 
|  | sysfs_remove_groups(&dev->dev.kobj, dev->msi_irq_groups); | 
|  | msi_attrs = dev->msi_irq_groups[0]->attrs; | 
|  | while (msi_attrs[count]) { | 
|  | dev_attr = container_of(msi_attrs[count], | 
|  | struct device_attribute, attr); | 
|  | kfree(dev_attr->attr.name); | 
|  | kfree(dev_attr); | 
|  | ++count; | 
|  | } | 
|  | kfree(msi_attrs); | 
|  | kfree(dev->msi_irq_groups[0]); | 
|  | kfree(dev->msi_irq_groups); | 
|  | dev->msi_irq_groups = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void pci_intx_for_msi(struct pci_dev *dev, int enable) | 
|  | { | 
|  | if (!(dev->dev_flags & PCI_DEV_FLAGS_MSI_INTX_DISABLE_BUG)) | 
|  | pci_intx(dev, enable); | 
|  | } | 
|  |  | 
|  | static void __pci_restore_msi_state(struct pci_dev *dev) | 
|  | { | 
|  | u16 control; | 
|  | struct msi_desc *entry; | 
|  |  | 
|  | if (!dev->msi_enabled) | 
|  | return; | 
|  |  | 
|  | entry = irq_get_msi_desc(dev->irq); | 
|  |  | 
|  | pci_intx_for_msi(dev, 0); | 
|  | pci_msi_set_enable(dev, 0); | 
|  | arch_restore_msi_irqs(dev); | 
|  |  | 
|  | pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control); | 
|  | msi_mask_irq(entry, msi_mask(entry->msi_attrib.multi_cap), | 
|  | entry->masked); | 
|  | control &= ~PCI_MSI_FLAGS_QSIZE; | 
|  | control |= (entry->msi_attrib.multiple << 4) | PCI_MSI_FLAGS_ENABLE; | 
|  | pci_write_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, control); | 
|  | } | 
|  |  | 
|  | static void __pci_restore_msix_state(struct pci_dev *dev) | 
|  | { | 
|  | struct msi_desc *entry; | 
|  |  | 
|  | if (!dev->msix_enabled) | 
|  | return; | 
|  | BUG_ON(list_empty(dev_to_msi_list(&dev->dev))); | 
|  |  | 
|  | /* route the table */ | 
|  | pci_intx_for_msi(dev, 0); | 
|  | pci_msix_clear_and_set_ctrl(dev, 0, | 
|  | PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL); | 
|  |  | 
|  | arch_restore_msi_irqs(dev); | 
|  | for_each_pci_msi_entry(entry, dev) | 
|  | msix_mask_irq(entry, entry->masked); | 
|  |  | 
|  | pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL, 0); | 
|  | } | 
|  |  | 
|  | void pci_restore_msi_state(struct pci_dev *dev) | 
|  | { | 
|  | __pci_restore_msi_state(dev); | 
|  | __pci_restore_msix_state(dev); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pci_restore_msi_state); | 
|  |  | 
|  | static ssize_t msi_mode_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct msi_desc *entry; | 
|  | unsigned long irq; | 
|  | int retval; | 
|  |  | 
|  | retval = kstrtoul(attr->attr.name, 10, &irq); | 
|  | if (retval) | 
|  | return retval; | 
|  |  | 
|  | entry = irq_get_msi_desc(irq); | 
|  | if (entry) | 
|  | return sprintf(buf, "%s\n", | 
|  | entry->msi_attrib.is_msix ? "msix" : "msi"); | 
|  |  | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | static int populate_msi_sysfs(struct pci_dev *pdev) | 
|  | { | 
|  | struct attribute **msi_attrs; | 
|  | struct attribute *msi_attr; | 
|  | struct device_attribute *msi_dev_attr; | 
|  | struct attribute_group *msi_irq_group; | 
|  | const struct attribute_group **msi_irq_groups; | 
|  | struct msi_desc *entry; | 
|  | int ret = -ENOMEM; | 
|  | int num_msi = 0; | 
|  | int count = 0; | 
|  | int i; | 
|  |  | 
|  | /* Determine how many msi entries we have */ | 
|  | for_each_pci_msi_entry(entry, pdev) | 
|  | num_msi += entry->nvec_used; | 
|  | if (!num_msi) | 
|  | return 0; | 
|  |  | 
|  | /* Dynamically create the MSI attributes for the PCI device */ | 
|  | msi_attrs = kcalloc(num_msi + 1, sizeof(void *), GFP_KERNEL); | 
|  | if (!msi_attrs) | 
|  | return -ENOMEM; | 
|  | for_each_pci_msi_entry(entry, pdev) { | 
|  | for (i = 0; i < entry->nvec_used; i++) { | 
|  | msi_dev_attr = kzalloc(sizeof(*msi_dev_attr), GFP_KERNEL); | 
|  | if (!msi_dev_attr) | 
|  | goto error_attrs; | 
|  | msi_attrs[count] = &msi_dev_attr->attr; | 
|  |  | 
|  | sysfs_attr_init(&msi_dev_attr->attr); | 
|  | msi_dev_attr->attr.name = kasprintf(GFP_KERNEL, "%d", | 
|  | entry->irq + i); | 
|  | if (!msi_dev_attr->attr.name) | 
|  | goto error_attrs; | 
|  | msi_dev_attr->attr.mode = S_IRUGO; | 
|  | msi_dev_attr->show = msi_mode_show; | 
|  | ++count; | 
|  | } | 
|  | } | 
|  |  | 
|  | msi_irq_group = kzalloc(sizeof(*msi_irq_group), GFP_KERNEL); | 
|  | if (!msi_irq_group) | 
|  | goto error_attrs; | 
|  | msi_irq_group->name = "msi_irqs"; | 
|  | msi_irq_group->attrs = msi_attrs; | 
|  |  | 
|  | msi_irq_groups = kcalloc(2, sizeof(void *), GFP_KERNEL); | 
|  | if (!msi_irq_groups) | 
|  | goto error_irq_group; | 
|  | msi_irq_groups[0] = msi_irq_group; | 
|  |  | 
|  | ret = sysfs_create_groups(&pdev->dev.kobj, msi_irq_groups); | 
|  | if (ret) | 
|  | goto error_irq_groups; | 
|  | pdev->msi_irq_groups = msi_irq_groups; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | error_irq_groups: | 
|  | kfree(msi_irq_groups); | 
|  | error_irq_group: | 
|  | kfree(msi_irq_group); | 
|  | error_attrs: | 
|  | count = 0; | 
|  | msi_attr = msi_attrs[count]; | 
|  | while (msi_attr) { | 
|  | msi_dev_attr = container_of(msi_attr, struct device_attribute, attr); | 
|  | kfree(msi_attr->name); | 
|  | kfree(msi_dev_attr); | 
|  | ++count; | 
|  | msi_attr = msi_attrs[count]; | 
|  | } | 
|  | kfree(msi_attrs); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct msi_desc * | 
|  | msi_setup_entry(struct pci_dev *dev, int nvec, struct irq_affinity *affd) | 
|  | { | 
|  | struct irq_affinity_desc *masks = NULL; | 
|  | struct msi_desc *entry; | 
|  | u16 control; | 
|  |  | 
|  | if (affd) | 
|  | masks = irq_create_affinity_masks(nvec, affd); | 
|  |  | 
|  | /* MSI Entry Initialization */ | 
|  | entry = alloc_msi_entry(&dev->dev, nvec, masks); | 
|  | if (!entry) | 
|  | goto out; | 
|  |  | 
|  | pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control); | 
|  |  | 
|  | entry->msi_attrib.is_msix	= 0; | 
|  | entry->msi_attrib.is_64		= !!(control & PCI_MSI_FLAGS_64BIT); | 
|  | entry->msi_attrib.is_virtual    = 0; | 
|  | entry->msi_attrib.entry_nr	= 0; | 
|  | entry->msi_attrib.maskbit	= !!(control & PCI_MSI_FLAGS_MASKBIT); | 
|  | entry->msi_attrib.default_irq	= dev->irq;	/* Save IOAPIC IRQ */ | 
|  | entry->msi_attrib.multi_cap	= (control & PCI_MSI_FLAGS_QMASK) >> 1; | 
|  | entry->msi_attrib.multiple	= ilog2(__roundup_pow_of_two(nvec)); | 
|  |  | 
|  | if (control & PCI_MSI_FLAGS_64BIT) | 
|  | entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_64; | 
|  | else | 
|  | entry->mask_pos = dev->msi_cap + PCI_MSI_MASK_32; | 
|  |  | 
|  | /* Save the initial mask status */ | 
|  | if (entry->msi_attrib.maskbit) | 
|  | pci_read_config_dword(dev, entry->mask_pos, &entry->masked); | 
|  |  | 
|  | out: | 
|  | kfree(masks); | 
|  | return entry; | 
|  | } | 
|  |  | 
|  | static int msi_verify_entries(struct pci_dev *dev) | 
|  | { | 
|  | struct msi_desc *entry; | 
|  |  | 
|  | for_each_pci_msi_entry(entry, dev) { | 
|  | if (!dev->no_64bit_msi || !entry->msg.address_hi) | 
|  | continue; | 
|  | pci_err(dev, "Device has broken 64-bit MSI but arch" | 
|  | " tried to assign one above 4G\n"); | 
|  | return -EIO; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * msi_capability_init - configure device's MSI capability structure | 
|  | * @dev: pointer to the pci_dev data structure of MSI device function | 
|  | * @nvec: number of interrupts to allocate | 
|  | * @affd: description of automatic IRQ affinity assignments (may be %NULL) | 
|  | * | 
|  | * Setup the MSI capability structure of the device with the requested | 
|  | * number of interrupts.  A return value of zero indicates the successful | 
|  | * setup of an entry with the new MSI IRQ.  A negative return value indicates | 
|  | * an error, and a positive return value indicates the number of interrupts | 
|  | * which could have been allocated. | 
|  | */ | 
|  | static int msi_capability_init(struct pci_dev *dev, int nvec, | 
|  | struct irq_affinity *affd) | 
|  | { | 
|  | struct msi_desc *entry; | 
|  | int ret; | 
|  | unsigned mask; | 
|  |  | 
|  | pci_msi_set_enable(dev, 0);	/* Disable MSI during set up */ | 
|  |  | 
|  | entry = msi_setup_entry(dev, nvec, affd); | 
|  | if (!entry) | 
|  | return -ENOMEM; | 
|  |  | 
|  | /* All MSIs are unmasked by default; mask them all */ | 
|  | mask = msi_mask(entry->msi_attrib.multi_cap); | 
|  | msi_mask_irq(entry, mask, mask); | 
|  |  | 
|  | list_add_tail(&entry->list, dev_to_msi_list(&dev->dev)); | 
|  |  | 
|  | /* Configure MSI capability structure */ | 
|  | ret = pci_msi_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSI); | 
|  | if (ret) { | 
|  | msi_mask_irq(entry, mask, ~mask); | 
|  | free_msi_irqs(dev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = msi_verify_entries(dev); | 
|  | if (ret) { | 
|  | msi_mask_irq(entry, mask, ~mask); | 
|  | free_msi_irqs(dev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | ret = populate_msi_sysfs(dev); | 
|  | if (ret) { | 
|  | msi_mask_irq(entry, mask, ~mask); | 
|  | free_msi_irqs(dev); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Set MSI enabled bits	*/ | 
|  | pci_intx_for_msi(dev, 0); | 
|  | pci_msi_set_enable(dev, 1); | 
|  | dev->msi_enabled = 1; | 
|  |  | 
|  | pcibios_free_irq(dev); | 
|  | dev->irq = entry->irq; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __iomem *msix_map_region(struct pci_dev *dev, unsigned nr_entries) | 
|  | { | 
|  | resource_size_t phys_addr; | 
|  | u32 table_offset; | 
|  | unsigned long flags; | 
|  | u8 bir; | 
|  |  | 
|  | pci_read_config_dword(dev, dev->msix_cap + PCI_MSIX_TABLE, | 
|  | &table_offset); | 
|  | bir = (u8)(table_offset & PCI_MSIX_TABLE_BIR); | 
|  | flags = pci_resource_flags(dev, bir); | 
|  | if (!flags || (flags & IORESOURCE_UNSET)) | 
|  | return NULL; | 
|  |  | 
|  | table_offset &= PCI_MSIX_TABLE_OFFSET; | 
|  | phys_addr = pci_resource_start(dev, bir) + table_offset; | 
|  |  | 
|  | return ioremap_nocache(phys_addr, nr_entries * PCI_MSIX_ENTRY_SIZE); | 
|  | } | 
|  |  | 
|  | static int msix_setup_entries(struct pci_dev *dev, void __iomem *base, | 
|  | struct msix_entry *entries, int nvec, | 
|  | struct irq_affinity *affd) | 
|  | { | 
|  | struct irq_affinity_desc *curmsk, *masks = NULL; | 
|  | struct msi_desc *entry; | 
|  | int ret, i; | 
|  | int vec_count = pci_msix_vec_count(dev); | 
|  |  | 
|  | if (affd) | 
|  | masks = irq_create_affinity_masks(nvec, affd); | 
|  |  | 
|  | for (i = 0, curmsk = masks; i < nvec; i++) { | 
|  | entry = alloc_msi_entry(&dev->dev, 1, curmsk); | 
|  | if (!entry) { | 
|  | if (!i) | 
|  | iounmap(base); | 
|  | else | 
|  | free_msi_irqs(dev); | 
|  | /* No enough memory. Don't try again */ | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | entry->msi_attrib.is_msix	= 1; | 
|  | entry->msi_attrib.is_64		= 1; | 
|  | if (entries) | 
|  | entry->msi_attrib.entry_nr = entries[i].entry; | 
|  | else | 
|  | entry->msi_attrib.entry_nr = i; | 
|  |  | 
|  | entry->msi_attrib.is_virtual = | 
|  | entry->msi_attrib.entry_nr >= vec_count; | 
|  |  | 
|  | entry->msi_attrib.default_irq	= dev->irq; | 
|  | entry->mask_base		= base; | 
|  |  | 
|  | list_add_tail(&entry->list, dev_to_msi_list(&dev->dev)); | 
|  | if (masks) | 
|  | curmsk++; | 
|  | } | 
|  | ret = 0; | 
|  | out: | 
|  | kfree(masks); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void msix_program_entries(struct pci_dev *dev, | 
|  | struct msix_entry *entries) | 
|  | { | 
|  | struct msi_desc *entry; | 
|  | int i = 0; | 
|  | void __iomem *desc_addr; | 
|  |  | 
|  | for_each_pci_msi_entry(entry, dev) { | 
|  | if (entries) | 
|  | entries[i++].vector = entry->irq; | 
|  |  | 
|  | desc_addr = pci_msix_desc_addr(entry); | 
|  | if (desc_addr) | 
|  | entry->masked = readl(desc_addr + | 
|  | PCI_MSIX_ENTRY_VECTOR_CTRL); | 
|  | else | 
|  | entry->masked = 0; | 
|  |  | 
|  | msix_mask_irq(entry, 1); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * msix_capability_init - configure device's MSI-X capability | 
|  | * @dev: pointer to the pci_dev data structure of MSI-X device function | 
|  | * @entries: pointer to an array of struct msix_entry entries | 
|  | * @nvec: number of @entries | 
|  | * @affd: Optional pointer to enable automatic affinity assignment | 
|  | * | 
|  | * Setup the MSI-X capability structure of device function with a | 
|  | * single MSI-X IRQ. A return of zero indicates the successful setup of | 
|  | * requested MSI-X entries with allocated IRQs or non-zero for otherwise. | 
|  | **/ | 
|  | static int msix_capability_init(struct pci_dev *dev, struct msix_entry *entries, | 
|  | int nvec, struct irq_affinity *affd) | 
|  | { | 
|  | int ret; | 
|  | u16 control; | 
|  | void __iomem *base; | 
|  |  | 
|  | /* Ensure MSI-X is disabled while it is set up */ | 
|  | pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0); | 
|  |  | 
|  | pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &control); | 
|  | /* Request & Map MSI-X table region */ | 
|  | base = msix_map_region(dev, msix_table_size(control)); | 
|  | if (!base) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret = msix_setup_entries(dev, base, entries, nvec, affd); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | ret = pci_msi_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX); | 
|  | if (ret) | 
|  | goto out_avail; | 
|  |  | 
|  | /* Check if all MSI entries honor device restrictions */ | 
|  | ret = msi_verify_entries(dev); | 
|  | if (ret) | 
|  | goto out_free; | 
|  |  | 
|  | /* | 
|  | * Some devices require MSI-X to be enabled before we can touch the | 
|  | * MSI-X registers.  We need to mask all the vectors to prevent | 
|  | * interrupts coming in before they're fully set up. | 
|  | */ | 
|  | pci_msix_clear_and_set_ctrl(dev, 0, | 
|  | PCI_MSIX_FLAGS_MASKALL | PCI_MSIX_FLAGS_ENABLE); | 
|  |  | 
|  | msix_program_entries(dev, entries); | 
|  |  | 
|  | ret = populate_msi_sysfs(dev); | 
|  | if (ret) | 
|  | goto out_free; | 
|  |  | 
|  | /* Set MSI-X enabled bits and unmask the function */ | 
|  | pci_intx_for_msi(dev, 0); | 
|  | dev->msix_enabled = 1; | 
|  | pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_MASKALL, 0); | 
|  |  | 
|  | pcibios_free_irq(dev); | 
|  | return 0; | 
|  |  | 
|  | out_avail: | 
|  | if (ret < 0) { | 
|  | /* | 
|  | * If we had some success, report the number of IRQs | 
|  | * we succeeded in setting up. | 
|  | */ | 
|  | struct msi_desc *entry; | 
|  | int avail = 0; | 
|  |  | 
|  | for_each_pci_msi_entry(entry, dev) { | 
|  | if (entry->irq != 0) | 
|  | avail++; | 
|  | } | 
|  | if (avail != 0) | 
|  | ret = avail; | 
|  | } | 
|  |  | 
|  | out_free: | 
|  | free_msi_irqs(dev); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_msi_supported - check whether MSI may be enabled on a device | 
|  | * @dev: pointer to the pci_dev data structure of MSI device function | 
|  | * @nvec: how many MSIs have been requested? | 
|  | * | 
|  | * Look at global flags, the device itself, and its parent buses | 
|  | * to determine if MSI/-X are supported for the device. If MSI/-X is | 
|  | * supported return 1, else return 0. | 
|  | **/ | 
|  | static int pci_msi_supported(struct pci_dev *dev, int nvec) | 
|  | { | 
|  | struct pci_bus *bus; | 
|  |  | 
|  | /* MSI must be globally enabled and supported by the device */ | 
|  | if (!pci_msi_enable) | 
|  | return 0; | 
|  |  | 
|  | if (!dev || dev->no_msi || dev->current_state != PCI_D0) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * You can't ask to have 0 or less MSIs configured. | 
|  | *  a) it's stupid .. | 
|  | *  b) the list manipulation code assumes nvec >= 1. | 
|  | */ | 
|  | if (nvec < 1) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * Any bridge which does NOT route MSI transactions from its | 
|  | * secondary bus to its primary bus must set NO_MSI flag on | 
|  | * the secondary pci_bus. | 
|  | * We expect only arch-specific PCI host bus controller driver | 
|  | * or quirks for specific PCI bridges to be setting NO_MSI. | 
|  | */ | 
|  | for (bus = dev->bus; bus; bus = bus->parent) | 
|  | if (bus->bus_flags & PCI_BUS_FLAGS_NO_MSI) | 
|  | return 0; | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_msi_vec_count - Return the number of MSI vectors a device can send | 
|  | * @dev: device to report about | 
|  | * | 
|  | * This function returns the number of MSI vectors a device requested via | 
|  | * Multiple Message Capable register. It returns a negative errno if the | 
|  | * device is not capable sending MSI interrupts. Otherwise, the call succeeds | 
|  | * and returns a power of two, up to a maximum of 2^5 (32), according to the | 
|  | * MSI specification. | 
|  | **/ | 
|  | int pci_msi_vec_count(struct pci_dev *dev) | 
|  | { | 
|  | int ret; | 
|  | u16 msgctl; | 
|  |  | 
|  | if (!dev->msi_cap) | 
|  | return -EINVAL; | 
|  |  | 
|  | pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &msgctl); | 
|  | ret = 1 << ((msgctl & PCI_MSI_FLAGS_QMASK) >> 1); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL(pci_msi_vec_count); | 
|  |  | 
|  | static void pci_msi_shutdown(struct pci_dev *dev) | 
|  | { | 
|  | struct msi_desc *desc; | 
|  | u32 mask; | 
|  |  | 
|  | if (!pci_msi_enable || !dev || !dev->msi_enabled) | 
|  | return; | 
|  |  | 
|  | BUG_ON(list_empty(dev_to_msi_list(&dev->dev))); | 
|  | desc = first_pci_msi_entry(dev); | 
|  |  | 
|  | pci_msi_set_enable(dev, 0); | 
|  | pci_intx_for_msi(dev, 1); | 
|  | dev->msi_enabled = 0; | 
|  |  | 
|  | /* Return the device with MSI unmasked as initial states */ | 
|  | mask = msi_mask(desc->msi_attrib.multi_cap); | 
|  | /* Keep cached state to be restored */ | 
|  | __pci_msi_desc_mask_irq(desc, mask, ~mask); | 
|  |  | 
|  | /* Restore dev->irq to its default pin-assertion IRQ */ | 
|  | dev->irq = desc->msi_attrib.default_irq; | 
|  | pcibios_alloc_irq(dev); | 
|  | } | 
|  |  | 
|  | void pci_disable_msi(struct pci_dev *dev) | 
|  | { | 
|  | if (!pci_msi_enable || !dev || !dev->msi_enabled) | 
|  | return; | 
|  |  | 
|  | pci_msi_shutdown(dev); | 
|  | free_msi_irqs(dev); | 
|  | } | 
|  | EXPORT_SYMBOL(pci_disable_msi); | 
|  |  | 
|  | /** | 
|  | * pci_msix_vec_count - return the number of device's MSI-X table entries | 
|  | * @dev: pointer to the pci_dev data structure of MSI-X device function | 
|  | * This function returns the number of device's MSI-X table entries and | 
|  | * therefore the number of MSI-X vectors device is capable of sending. | 
|  | * It returns a negative errno if the device is not capable of sending MSI-X | 
|  | * interrupts. | 
|  | **/ | 
|  | int pci_msix_vec_count(struct pci_dev *dev) | 
|  | { | 
|  | u16 control; | 
|  |  | 
|  | if (!dev->msix_cap) | 
|  | return -EINVAL; | 
|  |  | 
|  | pci_read_config_word(dev, dev->msix_cap + PCI_MSIX_FLAGS, &control); | 
|  | return msix_table_size(control); | 
|  | } | 
|  | EXPORT_SYMBOL(pci_msix_vec_count); | 
|  |  | 
|  | static int __pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, | 
|  | int nvec, struct irq_affinity *affd, int flags) | 
|  | { | 
|  | int nr_entries; | 
|  | int i, j; | 
|  |  | 
|  | if (!pci_msi_supported(dev, nvec)) | 
|  | return -EINVAL; | 
|  |  | 
|  | nr_entries = pci_msix_vec_count(dev); | 
|  | if (nr_entries < 0) | 
|  | return nr_entries; | 
|  | if (nvec > nr_entries && !(flags & PCI_IRQ_VIRTUAL)) | 
|  | return nr_entries; | 
|  |  | 
|  | if (entries) { | 
|  | /* Check for any invalid entries */ | 
|  | for (i = 0; i < nvec; i++) { | 
|  | if (entries[i].entry >= nr_entries) | 
|  | return -EINVAL;		/* invalid entry */ | 
|  | for (j = i + 1; j < nvec; j++) { | 
|  | if (entries[i].entry == entries[j].entry) | 
|  | return -EINVAL;	/* duplicate entry */ | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Check whether driver already requested for MSI IRQ */ | 
|  | if (dev->msi_enabled) { | 
|  | pci_info(dev, "can't enable MSI-X (MSI IRQ already assigned)\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  | return msix_capability_init(dev, entries, nvec, affd); | 
|  | } | 
|  |  | 
|  | static void pci_msix_shutdown(struct pci_dev *dev) | 
|  | { | 
|  | struct msi_desc *entry; | 
|  |  | 
|  | if (!pci_msi_enable || !dev || !dev->msix_enabled) | 
|  | return; | 
|  |  | 
|  | if (pci_dev_is_disconnected(dev)) { | 
|  | dev->msix_enabled = 0; | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Return the device with MSI-X masked as initial states */ | 
|  | for_each_pci_msi_entry(entry, dev) { | 
|  | /* Keep cached states to be restored */ | 
|  | __pci_msix_desc_mask_irq(entry, 1); | 
|  | } | 
|  |  | 
|  | pci_msix_clear_and_set_ctrl(dev, PCI_MSIX_FLAGS_ENABLE, 0); | 
|  | pci_intx_for_msi(dev, 1); | 
|  | dev->msix_enabled = 0; | 
|  | pcibios_alloc_irq(dev); | 
|  | } | 
|  |  | 
|  | void pci_disable_msix(struct pci_dev *dev) | 
|  | { | 
|  | if (!pci_msi_enable || !dev || !dev->msix_enabled) | 
|  | return; | 
|  |  | 
|  | pci_msix_shutdown(dev); | 
|  | free_msi_irqs(dev); | 
|  | } | 
|  | EXPORT_SYMBOL(pci_disable_msix); | 
|  |  | 
|  | void pci_no_msi(void) | 
|  | { | 
|  | pci_msi_enable = 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_msi_enabled - is MSI enabled? | 
|  | * | 
|  | * Returns true if MSI has not been disabled by the command-line option | 
|  | * pci=nomsi. | 
|  | **/ | 
|  | int pci_msi_enabled(void) | 
|  | { | 
|  | return pci_msi_enable; | 
|  | } | 
|  | EXPORT_SYMBOL(pci_msi_enabled); | 
|  |  | 
|  | static int __pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec, | 
|  | struct irq_affinity *affd) | 
|  | { | 
|  | int nvec; | 
|  | int rc; | 
|  |  | 
|  | if (!pci_msi_supported(dev, minvec)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Check whether driver already requested MSI-X IRQs */ | 
|  | if (dev->msix_enabled) { | 
|  | pci_info(dev, "can't enable MSI (MSI-X already enabled)\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (maxvec < minvec) | 
|  | return -ERANGE; | 
|  |  | 
|  | if (WARN_ON_ONCE(dev->msi_enabled)) | 
|  | return -EINVAL; | 
|  |  | 
|  | nvec = pci_msi_vec_count(dev); | 
|  | if (nvec < 0) | 
|  | return nvec; | 
|  | if (nvec < minvec) | 
|  | return -ENOSPC; | 
|  |  | 
|  | if (nvec > maxvec) | 
|  | nvec = maxvec; | 
|  |  | 
|  | for (;;) { | 
|  | if (affd) { | 
|  | nvec = irq_calc_affinity_vectors(minvec, nvec, affd); | 
|  | if (nvec < minvec) | 
|  | return -ENOSPC; | 
|  | } | 
|  |  | 
|  | rc = msi_capability_init(dev, nvec, affd); | 
|  | if (rc == 0) | 
|  | return nvec; | 
|  |  | 
|  | if (rc < 0) | 
|  | return rc; | 
|  | if (rc < minvec) | 
|  | return -ENOSPC; | 
|  |  | 
|  | nvec = rc; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* deprecated, don't use */ | 
|  | int pci_enable_msi(struct pci_dev *dev) | 
|  | { | 
|  | int rc = __pci_enable_msi_range(dev, 1, 1, NULL); | 
|  | if (rc < 0) | 
|  | return rc; | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL(pci_enable_msi); | 
|  |  | 
|  | static int __pci_enable_msix_range(struct pci_dev *dev, | 
|  | struct msix_entry *entries, int minvec, | 
|  | int maxvec, struct irq_affinity *affd, | 
|  | int flags) | 
|  | { | 
|  | int rc, nvec = maxvec; | 
|  |  | 
|  | if (maxvec < minvec) | 
|  | return -ERANGE; | 
|  |  | 
|  | if (WARN_ON_ONCE(dev->msix_enabled)) | 
|  | return -EINVAL; | 
|  |  | 
|  | for (;;) { | 
|  | if (affd) { | 
|  | nvec = irq_calc_affinity_vectors(minvec, nvec, affd); | 
|  | if (nvec < minvec) | 
|  | return -ENOSPC; | 
|  | } | 
|  |  | 
|  | rc = __pci_enable_msix(dev, entries, nvec, affd, flags); | 
|  | if (rc == 0) | 
|  | return nvec; | 
|  |  | 
|  | if (rc < 0) | 
|  | return rc; | 
|  | if (rc < minvec) | 
|  | return -ENOSPC; | 
|  |  | 
|  | nvec = rc; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_enable_msix_range - configure device's MSI-X capability structure | 
|  | * @dev: pointer to the pci_dev data structure of MSI-X device function | 
|  | * @entries: pointer to an array of MSI-X entries | 
|  | * @minvec: minimum number of MSI-X IRQs requested | 
|  | * @maxvec: maximum number of MSI-X IRQs requested | 
|  | * | 
|  | * Setup the MSI-X capability structure of device function with a maximum | 
|  | * possible number of interrupts in the range between @minvec and @maxvec | 
|  | * upon its software driver call to request for MSI-X mode enabled on its | 
|  | * hardware device function. It returns a negative errno if an error occurs. | 
|  | * If it succeeds, it returns the actual number of interrupts allocated and | 
|  | * indicates the successful configuration of MSI-X capability structure | 
|  | * with new allocated MSI-X interrupts. | 
|  | **/ | 
|  | int pci_enable_msix_range(struct pci_dev *dev, struct msix_entry *entries, | 
|  | int minvec, int maxvec) | 
|  | { | 
|  | return __pci_enable_msix_range(dev, entries, minvec, maxvec, NULL, 0); | 
|  | } | 
|  | EXPORT_SYMBOL(pci_enable_msix_range); | 
|  |  | 
|  | /** | 
|  | * pci_alloc_irq_vectors_affinity - allocate multiple IRQs for a device | 
|  | * @dev:		PCI device to operate on | 
|  | * @min_vecs:		minimum number of vectors required (must be >= 1) | 
|  | * @max_vecs:		maximum (desired) number of vectors | 
|  | * @flags:		flags or quirks for the allocation | 
|  | * @affd:		optional description of the affinity requirements | 
|  | * | 
|  | * Allocate up to @max_vecs interrupt vectors for @dev, using MSI-X or MSI | 
|  | * vectors if available, and fall back to a single legacy vector | 
|  | * if neither is available.  Return the number of vectors allocated, | 
|  | * (which might be smaller than @max_vecs) if successful, or a negative | 
|  | * error code on error. If less than @min_vecs interrupt vectors are | 
|  | * available for @dev the function will fail with -ENOSPC. | 
|  | * | 
|  | * To get the Linux IRQ number used for a vector that can be passed to | 
|  | * request_irq() use the pci_irq_vector() helper. | 
|  | */ | 
|  | int pci_alloc_irq_vectors_affinity(struct pci_dev *dev, unsigned int min_vecs, | 
|  | unsigned int max_vecs, unsigned int flags, | 
|  | struct irq_affinity *affd) | 
|  | { | 
|  | struct irq_affinity msi_default_affd = {0}; | 
|  | int msix_vecs = -ENOSPC; | 
|  | int msi_vecs = -ENOSPC; | 
|  |  | 
|  | if (flags & PCI_IRQ_AFFINITY) { | 
|  | if (!affd) | 
|  | affd = &msi_default_affd; | 
|  | } else { | 
|  | if (WARN_ON(affd)) | 
|  | affd = NULL; | 
|  | } | 
|  |  | 
|  | if (flags & PCI_IRQ_MSIX) { | 
|  | msix_vecs = __pci_enable_msix_range(dev, NULL, min_vecs, | 
|  | max_vecs, affd, flags); | 
|  | if (msix_vecs > 0) | 
|  | return msix_vecs; | 
|  | } | 
|  |  | 
|  | if (flags & PCI_IRQ_MSI) { | 
|  | msi_vecs = __pci_enable_msi_range(dev, min_vecs, max_vecs, | 
|  | affd); | 
|  | if (msi_vecs > 0) | 
|  | return msi_vecs; | 
|  | } | 
|  |  | 
|  | /* use legacy IRQ if allowed */ | 
|  | if (flags & PCI_IRQ_LEGACY) { | 
|  | if (min_vecs == 1 && dev->irq) { | 
|  | /* | 
|  | * Invoke the affinity spreading logic to ensure that | 
|  | * the device driver can adjust queue configuration | 
|  | * for the single interrupt case. | 
|  | */ | 
|  | if (affd) | 
|  | irq_create_affinity_masks(1, affd); | 
|  | pci_intx(dev, 1); | 
|  | return 1; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (msix_vecs == -ENOSPC) | 
|  | return -ENOSPC; | 
|  | return msi_vecs; | 
|  | } | 
|  | EXPORT_SYMBOL(pci_alloc_irq_vectors_affinity); | 
|  |  | 
|  | /** | 
|  | * pci_free_irq_vectors - free previously allocated IRQs for a device | 
|  | * @dev:		PCI device to operate on | 
|  | * | 
|  | * Undoes the allocations and enabling in pci_alloc_irq_vectors(). | 
|  | */ | 
|  | void pci_free_irq_vectors(struct pci_dev *dev) | 
|  | { | 
|  | pci_disable_msix(dev); | 
|  | pci_disable_msi(dev); | 
|  | } | 
|  | EXPORT_SYMBOL(pci_free_irq_vectors); | 
|  |  | 
|  | /** | 
|  | * pci_irq_vector - return Linux IRQ number of a device vector | 
|  | * @dev: PCI device to operate on | 
|  | * @nr: device-relative interrupt vector index (0-based). | 
|  | */ | 
|  | int pci_irq_vector(struct pci_dev *dev, unsigned int nr) | 
|  | { | 
|  | if (dev->msix_enabled) { | 
|  | struct msi_desc *entry; | 
|  | int i = 0; | 
|  |  | 
|  | for_each_pci_msi_entry(entry, dev) { | 
|  | if (i == nr) | 
|  | return entry->irq; | 
|  | i++; | 
|  | } | 
|  | WARN_ON_ONCE(1); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (dev->msi_enabled) { | 
|  | struct msi_desc *entry = first_pci_msi_entry(dev); | 
|  |  | 
|  | if (WARN_ON_ONCE(nr >= entry->nvec_used)) | 
|  | return -EINVAL; | 
|  | } else { | 
|  | if (WARN_ON_ONCE(nr > 0)) | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return dev->irq + nr; | 
|  | } | 
|  | EXPORT_SYMBOL(pci_irq_vector); | 
|  |  | 
|  | /** | 
|  | * pci_irq_get_affinity - return the affinity of a particular MSI vector | 
|  | * @dev:	PCI device to operate on | 
|  | * @nr:		device-relative interrupt vector index (0-based). | 
|  | */ | 
|  | const struct cpumask *pci_irq_get_affinity(struct pci_dev *dev, int nr) | 
|  | { | 
|  | if (dev->msix_enabled) { | 
|  | struct msi_desc *entry; | 
|  | int i = 0; | 
|  |  | 
|  | for_each_pci_msi_entry(entry, dev) { | 
|  | if (i == nr) | 
|  | return &entry->affinity->mask; | 
|  | i++; | 
|  | } | 
|  | WARN_ON_ONCE(1); | 
|  | return NULL; | 
|  | } else if (dev->msi_enabled) { | 
|  | struct msi_desc *entry = first_pci_msi_entry(dev); | 
|  |  | 
|  | if (WARN_ON_ONCE(!entry || !entry->affinity || | 
|  | nr >= entry->nvec_used)) | 
|  | return NULL; | 
|  |  | 
|  | return &entry->affinity[nr].mask; | 
|  | } else { | 
|  | return cpu_possible_mask; | 
|  | } | 
|  | } | 
|  | EXPORT_SYMBOL(pci_irq_get_affinity); | 
|  |  | 
|  | /** | 
|  | * pci_irq_get_node - return the NUMA node of a particular MSI vector | 
|  | * @pdev:	PCI device to operate on | 
|  | * @vec:	device-relative interrupt vector index (0-based). | 
|  | */ | 
|  | int pci_irq_get_node(struct pci_dev *pdev, int vec) | 
|  | { | 
|  | const struct cpumask *mask; | 
|  |  | 
|  | mask = pci_irq_get_affinity(pdev, vec); | 
|  | if (mask) | 
|  | return local_memory_node(cpu_to_node(cpumask_first(mask))); | 
|  | return dev_to_node(&pdev->dev); | 
|  | } | 
|  | EXPORT_SYMBOL(pci_irq_get_node); | 
|  |  | 
|  | struct pci_dev *msi_desc_to_pci_dev(struct msi_desc *desc) | 
|  | { | 
|  | return to_pci_dev(desc->dev); | 
|  | } | 
|  | EXPORT_SYMBOL(msi_desc_to_pci_dev); | 
|  |  | 
|  | void *msi_desc_to_pci_sysdata(struct msi_desc *desc) | 
|  | { | 
|  | struct pci_dev *dev = msi_desc_to_pci_dev(desc); | 
|  |  | 
|  | return dev->bus->sysdata; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(msi_desc_to_pci_sysdata); | 
|  |  | 
|  | #ifdef CONFIG_PCI_MSI_IRQ_DOMAIN | 
|  | /** | 
|  | * pci_msi_domain_write_msg - Helper to write MSI message to PCI config space | 
|  | * @irq_data:	Pointer to interrupt data of the MSI interrupt | 
|  | * @msg:	Pointer to the message | 
|  | */ | 
|  | void pci_msi_domain_write_msg(struct irq_data *irq_data, struct msi_msg *msg) | 
|  | { | 
|  | struct msi_desc *desc = irq_data_get_msi_desc(irq_data); | 
|  |  | 
|  | /* | 
|  | * For MSI-X desc->irq is always equal to irq_data->irq. For | 
|  | * MSI only the first interrupt of MULTI MSI passes the test. | 
|  | */ | 
|  | if (desc->irq == irq_data->irq) | 
|  | __pci_write_msi_msg(desc, msg); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_msi_domain_calc_hwirq - Generate a unique ID for an MSI source | 
|  | * @dev:	Pointer to the PCI device | 
|  | * @desc:	Pointer to the MSI descriptor | 
|  | * | 
|  | * The ID number is only used within the irqdomain. | 
|  | */ | 
|  | irq_hw_number_t pci_msi_domain_calc_hwirq(struct pci_dev *dev, | 
|  | struct msi_desc *desc) | 
|  | { | 
|  | return (irq_hw_number_t)desc->msi_attrib.entry_nr | | 
|  | pci_dev_id(dev) << 11 | | 
|  | (pci_domain_nr(dev->bus) & 0xFFFFFFFF) << 27; | 
|  | } | 
|  |  | 
|  | static inline bool pci_msi_desc_is_multi_msi(struct msi_desc *desc) | 
|  | { | 
|  | return !desc->msi_attrib.is_msix && desc->nvec_used > 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_msi_domain_check_cap - Verify that @domain supports the capabilities | 
|  | * 			      for @dev | 
|  | * @domain:	The interrupt domain to check | 
|  | * @info:	The domain info for verification | 
|  | * @dev:	The device to check | 
|  | * | 
|  | * Returns: | 
|  | *  0 if the functionality is supported | 
|  | *  1 if Multi MSI is requested, but the domain does not support it | 
|  | *  -ENOTSUPP otherwise | 
|  | */ | 
|  | int pci_msi_domain_check_cap(struct irq_domain *domain, | 
|  | struct msi_domain_info *info, struct device *dev) | 
|  | { | 
|  | struct msi_desc *desc = first_pci_msi_entry(to_pci_dev(dev)); | 
|  |  | 
|  | /* Special handling to support __pci_enable_msi_range() */ | 
|  | if (pci_msi_desc_is_multi_msi(desc) && | 
|  | !(info->flags & MSI_FLAG_MULTI_PCI_MSI)) | 
|  | return 1; | 
|  | else if (desc->msi_attrib.is_msix && !(info->flags & MSI_FLAG_PCI_MSIX)) | 
|  | return -ENOTSUPP; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int pci_msi_domain_handle_error(struct irq_domain *domain, | 
|  | struct msi_desc *desc, int error) | 
|  | { | 
|  | /* Special handling to support __pci_enable_msi_range() */ | 
|  | if (pci_msi_desc_is_multi_msi(desc) && error == -ENOSPC) | 
|  | return 1; | 
|  |  | 
|  | return error; | 
|  | } | 
|  |  | 
|  | #ifdef GENERIC_MSI_DOMAIN_OPS | 
|  | static void pci_msi_domain_set_desc(msi_alloc_info_t *arg, | 
|  | struct msi_desc *desc) | 
|  | { | 
|  | arg->desc = desc; | 
|  | arg->hwirq = pci_msi_domain_calc_hwirq(msi_desc_to_pci_dev(desc), | 
|  | desc); | 
|  | } | 
|  | #else | 
|  | #define pci_msi_domain_set_desc		NULL | 
|  | #endif | 
|  |  | 
|  | static struct msi_domain_ops pci_msi_domain_ops_default = { | 
|  | .set_desc	= pci_msi_domain_set_desc, | 
|  | .msi_check	= pci_msi_domain_check_cap, | 
|  | .handle_error	= pci_msi_domain_handle_error, | 
|  | }; | 
|  |  | 
|  | static void pci_msi_domain_update_dom_ops(struct msi_domain_info *info) | 
|  | { | 
|  | struct msi_domain_ops *ops = info->ops; | 
|  |  | 
|  | if (ops == NULL) { | 
|  | info->ops = &pci_msi_domain_ops_default; | 
|  | } else { | 
|  | if (ops->set_desc == NULL) | 
|  | ops->set_desc = pci_msi_domain_set_desc; | 
|  | if (ops->msi_check == NULL) | 
|  | ops->msi_check = pci_msi_domain_check_cap; | 
|  | if (ops->handle_error == NULL) | 
|  | ops->handle_error = pci_msi_domain_handle_error; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void pci_msi_domain_update_chip_ops(struct msi_domain_info *info) | 
|  | { | 
|  | struct irq_chip *chip = info->chip; | 
|  |  | 
|  | BUG_ON(!chip); | 
|  | if (!chip->irq_write_msi_msg) | 
|  | chip->irq_write_msi_msg = pci_msi_domain_write_msg; | 
|  | if (!chip->irq_mask) | 
|  | chip->irq_mask = pci_msi_mask_irq; | 
|  | if (!chip->irq_unmask) | 
|  | chip->irq_unmask = pci_msi_unmask_irq; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_msi_create_irq_domain - Create a MSI interrupt domain | 
|  | * @fwnode:	Optional fwnode of the interrupt controller | 
|  | * @info:	MSI domain info | 
|  | * @parent:	Parent irq domain | 
|  | * | 
|  | * Updates the domain and chip ops and creates a MSI interrupt domain. | 
|  | * | 
|  | * Returns: | 
|  | * A domain pointer or NULL in case of failure. | 
|  | */ | 
|  | struct irq_domain *pci_msi_create_irq_domain(struct fwnode_handle *fwnode, | 
|  | struct msi_domain_info *info, | 
|  | struct irq_domain *parent) | 
|  | { | 
|  | struct irq_domain *domain; | 
|  |  | 
|  | if (WARN_ON(info->flags & MSI_FLAG_LEVEL_CAPABLE)) | 
|  | info->flags &= ~MSI_FLAG_LEVEL_CAPABLE; | 
|  |  | 
|  | if (info->flags & MSI_FLAG_USE_DEF_DOM_OPS) | 
|  | pci_msi_domain_update_dom_ops(info); | 
|  | if (info->flags & MSI_FLAG_USE_DEF_CHIP_OPS) | 
|  | pci_msi_domain_update_chip_ops(info); | 
|  |  | 
|  | info->flags |= MSI_FLAG_ACTIVATE_EARLY; | 
|  | if (IS_ENABLED(CONFIG_GENERIC_IRQ_RESERVATION_MODE)) | 
|  | info->flags |= MSI_FLAG_MUST_REACTIVATE; | 
|  |  | 
|  | /* PCI-MSI is oneshot-safe */ | 
|  | info->chip->flags |= IRQCHIP_ONESHOT_SAFE; | 
|  |  | 
|  | domain = msi_create_irq_domain(fwnode, info, parent); | 
|  | if (!domain) | 
|  | return NULL; | 
|  |  | 
|  | irq_domain_update_bus_token(domain, DOMAIN_BUS_PCI_MSI); | 
|  | return domain; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pci_msi_create_irq_domain); | 
|  |  | 
|  | /* | 
|  | * Users of the generic MSI infrastructure expect a device to have a single ID, | 
|  | * so with DMA aliases we have to pick the least-worst compromise. Devices with | 
|  | * DMA phantom functions tend to still emit MSIs from the real function number, | 
|  | * so we ignore those and only consider topological aliases where either the | 
|  | * alias device or RID appears on a different bus number. We also make the | 
|  | * reasonable assumption that bridges are walked in an upstream direction (so | 
|  | * the last one seen wins), and the much braver assumption that the most likely | 
|  | * case is that of PCI->PCIe so we should always use the alias RID. This echoes | 
|  | * the logic from intel_irq_remapping's set_msi_sid(), which presumably works | 
|  | * well enough in practice; in the face of the horrible PCIe<->PCI-X conditions | 
|  | * for taking ownership all we can really do is close our eyes and hope... | 
|  | */ | 
|  | static int get_msi_id_cb(struct pci_dev *pdev, u16 alias, void *data) | 
|  | { | 
|  | u32 *pa = data; | 
|  | u8 bus = PCI_BUS_NUM(*pa); | 
|  |  | 
|  | if (pdev->bus->number != bus || PCI_BUS_NUM(alias) != bus) | 
|  | *pa = alias; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_msi_domain_get_msi_rid - Get the MSI requester id (RID) | 
|  | * @domain:	The interrupt domain | 
|  | * @pdev:	The PCI device. | 
|  | * | 
|  | * The RID for a device is formed from the alias, with a firmware | 
|  | * supplied mapping applied | 
|  | * | 
|  | * Returns: The RID. | 
|  | */ | 
|  | u32 pci_msi_domain_get_msi_rid(struct irq_domain *domain, struct pci_dev *pdev) | 
|  | { | 
|  | struct device_node *of_node; | 
|  | u32 rid = pci_dev_id(pdev); | 
|  |  | 
|  | pci_for_each_dma_alias(pdev, get_msi_id_cb, &rid); | 
|  |  | 
|  | of_node = irq_domain_get_of_node(domain); | 
|  | rid = of_node ? of_msi_map_rid(&pdev->dev, of_node, rid) : | 
|  | iort_msi_map_rid(&pdev->dev, rid); | 
|  |  | 
|  | return rid; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * pci_msi_get_device_domain - Get the MSI domain for a given PCI device | 
|  | * @pdev:	The PCI device | 
|  | * | 
|  | * Use the firmware data to find a device-specific MSI domain | 
|  | * (i.e. not one that is set as a default). | 
|  | * | 
|  | * Returns: The corresponding MSI domain or NULL if none has been found. | 
|  | */ | 
|  | struct irq_domain *pci_msi_get_device_domain(struct pci_dev *pdev) | 
|  | { | 
|  | struct irq_domain *dom; | 
|  | u32 rid = pci_dev_id(pdev); | 
|  |  | 
|  | pci_for_each_dma_alias(pdev, get_msi_id_cb, &rid); | 
|  | dom = of_msi_map_get_device_domain(&pdev->dev, rid); | 
|  | if (!dom) | 
|  | dom = iort_get_device_domain(&pdev->dev, rid); | 
|  | return dom; | 
|  | } | 
|  | #endif /* CONFIG_PCI_MSI_IRQ_DOMAIN */ |