|  | // SPDX-License-Identifier: GPL-1.0+ | 
|  | /* | 
|  | * Renesas USB driver | 
|  | * | 
|  | * Copyright (C) 2011 Renesas Solutions Corp. | 
|  | * Copyright (C) 2019 Renesas Electronics Corporation | 
|  | * Kuninori Morimoto <[email protected]> | 
|  | */ | 
|  | #include <linux/delay.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/scatterlist.h> | 
|  | #include "common.h" | 
|  | #include "pipe.h" | 
|  |  | 
|  | #define usbhsf_get_cfifo(p)	(&((p)->fifo_info.cfifo)) | 
|  |  | 
|  | #define usbhsf_fifo_is_busy(f)	((f)->pipe) /* see usbhs_pipe_select_fifo */ | 
|  |  | 
|  | /* | 
|  | *		packet initialize | 
|  | */ | 
|  | void usbhs_pkt_init(struct usbhs_pkt *pkt) | 
|  | { | 
|  | INIT_LIST_HEAD(&pkt->node); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		packet control function | 
|  | */ | 
|  | static int usbhsf_null_handle(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  |  | 
|  | dev_err(dev, "null handler\n"); | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static const struct usbhs_pkt_handle usbhsf_null_handler = { | 
|  | .prepare = usbhsf_null_handle, | 
|  | .try_run = usbhsf_null_handle, | 
|  | }; | 
|  |  | 
|  | void usbhs_pkt_push(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt, | 
|  | void (*done)(struct usbhs_priv *priv, | 
|  | struct usbhs_pkt *pkt), | 
|  | void *buf, int len, int zero, int sequence) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!done) { | 
|  | dev_err(dev, "no done function\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /********************  spin lock ********************/ | 
|  | usbhs_lock(priv, flags); | 
|  |  | 
|  | if (!pipe->handler) { | 
|  | dev_err(dev, "no handler function\n"); | 
|  | pipe->handler = &usbhsf_null_handler; | 
|  | } | 
|  |  | 
|  | list_move_tail(&pkt->node, &pipe->list); | 
|  |  | 
|  | /* | 
|  | * each pkt must hold own handler. | 
|  | * because handler might be changed by its situation. | 
|  | * dma handler -> pio handler. | 
|  | */ | 
|  | pkt->pipe	= pipe; | 
|  | pkt->buf	= buf; | 
|  | pkt->handler	= pipe->handler; | 
|  | pkt->length	= len; | 
|  | pkt->zero	= zero; | 
|  | pkt->actual	= 0; | 
|  | pkt->done	= done; | 
|  | pkt->sequence	= sequence; | 
|  |  | 
|  | usbhs_unlock(priv, flags); | 
|  | /********************  spin unlock ******************/ | 
|  | } | 
|  |  | 
|  | static void __usbhsf_pkt_del(struct usbhs_pkt *pkt) | 
|  | { | 
|  | list_del_init(&pkt->node); | 
|  | } | 
|  |  | 
|  | struct usbhs_pkt *__usbhsf_pkt_get(struct usbhs_pipe *pipe) | 
|  | { | 
|  | return list_first_entry_or_null(&pipe->list, struct usbhs_pkt, node); | 
|  | } | 
|  |  | 
|  | static void usbhsf_fifo_unselect(struct usbhs_pipe *pipe, | 
|  | struct usbhs_fifo *fifo); | 
|  | static struct dma_chan *usbhsf_dma_chan_get(struct usbhs_fifo *fifo, | 
|  | struct usbhs_pkt *pkt); | 
|  | #define usbhsf_dma_map(p)	__usbhsf_dma_map_ctrl(p, 1) | 
|  | #define usbhsf_dma_unmap(p)	__usbhsf_dma_map_ctrl(p, 0) | 
|  | static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map); | 
|  | struct usbhs_pkt *usbhs_pkt_pop(struct usbhs_pipe *pipe, struct usbhs_pkt *pkt) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe); | 
|  | unsigned long flags; | 
|  |  | 
|  | /********************  spin lock ********************/ | 
|  | usbhs_lock(priv, flags); | 
|  |  | 
|  | usbhs_pipe_disable(pipe); | 
|  |  | 
|  | if (!pkt) | 
|  | pkt = __usbhsf_pkt_get(pipe); | 
|  |  | 
|  | if (pkt) { | 
|  | struct dma_chan *chan = NULL; | 
|  |  | 
|  | if (fifo) | 
|  | chan = usbhsf_dma_chan_get(fifo, pkt); | 
|  | if (chan) { | 
|  | dmaengine_terminate_all(chan); | 
|  | usbhsf_dma_unmap(pkt); | 
|  | } | 
|  |  | 
|  | usbhs_pipe_clear_without_sequence(pipe, 0, 0); | 
|  |  | 
|  | __usbhsf_pkt_del(pkt); | 
|  | } | 
|  |  | 
|  | if (fifo) | 
|  | usbhsf_fifo_unselect(pipe, fifo); | 
|  |  | 
|  | usbhs_unlock(priv, flags); | 
|  | /********************  spin unlock ******************/ | 
|  |  | 
|  | return pkt; | 
|  | } | 
|  |  | 
|  | enum { | 
|  | USBHSF_PKT_PREPARE, | 
|  | USBHSF_PKT_TRY_RUN, | 
|  | USBHSF_PKT_DMA_DONE, | 
|  | }; | 
|  |  | 
|  | static int usbhsf_pkt_handler(struct usbhs_pipe *pipe, int type) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct usbhs_pkt *pkt; | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | int (*func)(struct usbhs_pkt *pkt, int *is_done); | 
|  | unsigned long flags; | 
|  | int ret = 0; | 
|  | int is_done = 0; | 
|  |  | 
|  | /********************  spin lock ********************/ | 
|  | usbhs_lock(priv, flags); | 
|  |  | 
|  | pkt = __usbhsf_pkt_get(pipe); | 
|  | if (!pkt) | 
|  | goto __usbhs_pkt_handler_end; | 
|  |  | 
|  | switch (type) { | 
|  | case USBHSF_PKT_PREPARE: | 
|  | func = pkt->handler->prepare; | 
|  | break; | 
|  | case USBHSF_PKT_TRY_RUN: | 
|  | func = pkt->handler->try_run; | 
|  | break; | 
|  | case USBHSF_PKT_DMA_DONE: | 
|  | func = pkt->handler->dma_done; | 
|  | break; | 
|  | default: | 
|  | dev_err(dev, "unknown pkt handler\n"); | 
|  | goto __usbhs_pkt_handler_end; | 
|  | } | 
|  |  | 
|  | if (likely(func)) | 
|  | ret = func(pkt, &is_done); | 
|  |  | 
|  | if (is_done) | 
|  | __usbhsf_pkt_del(pkt); | 
|  |  | 
|  | __usbhs_pkt_handler_end: | 
|  | usbhs_unlock(priv, flags); | 
|  | /********************  spin unlock ******************/ | 
|  |  | 
|  | if (is_done) { | 
|  | pkt->done(priv, pkt); | 
|  | usbhs_pkt_start(pipe); | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | void usbhs_pkt_start(struct usbhs_pipe *pipe) | 
|  | { | 
|  | usbhsf_pkt_handler(pipe, USBHSF_PKT_PREPARE); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		irq enable/disable function | 
|  | */ | 
|  | #define usbhsf_irq_empty_ctrl(p, e) usbhsf_irq_callback_ctrl(p, irq_bempsts, e) | 
|  | #define usbhsf_irq_ready_ctrl(p, e) usbhsf_irq_callback_ctrl(p, irq_brdysts, e) | 
|  | #define usbhsf_irq_callback_ctrl(pipe, status, enable)			\ | 
|  | ({								\ | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe);	\ | 
|  | struct usbhs_mod *mod = usbhs_mod_get_current(priv);	\ | 
|  | u16 status = (1 << usbhs_pipe_number(pipe));		\ | 
|  | if (!mod)						\ | 
|  | return;						\ | 
|  | if (enable)						\ | 
|  | mod->status |= status;				\ | 
|  | else							\ | 
|  | mod->status &= ~status;				\ | 
|  | usbhs_irq_callback_update(priv, mod);			\ | 
|  | }) | 
|  |  | 
|  | static void usbhsf_tx_irq_ctrl(struct usbhs_pipe *pipe, int enable) | 
|  | { | 
|  | /* | 
|  | * And DCP pipe can NOT use "ready interrupt" for "send" | 
|  | * it should use "empty" interrupt. | 
|  | * see | 
|  | *   "Operation" - "Interrupt Function" - "BRDY Interrupt" | 
|  | * | 
|  | * on the other hand, normal pipe can use "ready interrupt" for "send" | 
|  | * even though it is single/double buffer | 
|  | */ | 
|  | if (usbhs_pipe_is_dcp(pipe)) | 
|  | usbhsf_irq_empty_ctrl(pipe, enable); | 
|  | else | 
|  | usbhsf_irq_ready_ctrl(pipe, enable); | 
|  | } | 
|  |  | 
|  | static void usbhsf_rx_irq_ctrl(struct usbhs_pipe *pipe, int enable) | 
|  | { | 
|  | usbhsf_irq_ready_ctrl(pipe, enable); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		FIFO ctrl | 
|  | */ | 
|  | static void usbhsf_send_terminator(struct usbhs_pipe *pipe, | 
|  | struct usbhs_fifo *fifo) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  |  | 
|  | usbhs_bset(priv, fifo->ctr, BVAL, BVAL); | 
|  | } | 
|  |  | 
|  | static int usbhsf_fifo_barrier(struct usbhs_priv *priv, | 
|  | struct usbhs_fifo *fifo) | 
|  | { | 
|  | /* The FIFO port is accessible */ | 
|  | if (usbhs_read(priv, fifo->ctr) & FRDY) | 
|  | return 0; | 
|  |  | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | static void usbhsf_fifo_clear(struct usbhs_pipe *pipe, | 
|  | struct usbhs_fifo *fifo) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | int ret = 0; | 
|  |  | 
|  | if (!usbhs_pipe_is_dcp(pipe)) { | 
|  | /* | 
|  | * This driver checks the pipe condition first to avoid -EBUSY | 
|  | * from usbhsf_fifo_barrier() if the pipe is RX direction and | 
|  | * empty. | 
|  | */ | 
|  | if (usbhs_pipe_is_dir_in(pipe)) | 
|  | ret = usbhs_pipe_is_accessible(pipe); | 
|  | if (!ret) | 
|  | ret = usbhsf_fifo_barrier(priv, fifo); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * if non-DCP pipe, this driver should set BCLR when | 
|  | * usbhsf_fifo_barrier() returns 0. | 
|  | */ | 
|  | if (!ret) | 
|  | usbhs_write(priv, fifo->ctr, BCLR); | 
|  | } | 
|  |  | 
|  | static int usbhsf_fifo_rcv_len(struct usbhs_priv *priv, | 
|  | struct usbhs_fifo *fifo) | 
|  | { | 
|  | return usbhs_read(priv, fifo->ctr) & DTLN_MASK; | 
|  | } | 
|  |  | 
|  | static void usbhsf_fifo_unselect(struct usbhs_pipe *pipe, | 
|  | struct usbhs_fifo *fifo) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  |  | 
|  | usbhs_pipe_select_fifo(pipe, NULL); | 
|  | usbhs_write(priv, fifo->sel, 0); | 
|  | } | 
|  |  | 
|  | static int usbhsf_fifo_select(struct usbhs_pipe *pipe, | 
|  | struct usbhs_fifo *fifo, | 
|  | int write) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | int timeout = 1024; | 
|  | u16 mask = ((1 << 5) | 0xF);		/* mask of ISEL | CURPIPE */ | 
|  | u16 base = usbhs_pipe_number(pipe);	/* CURPIPE */ | 
|  |  | 
|  | if (usbhs_pipe_is_busy(pipe) || | 
|  | usbhsf_fifo_is_busy(fifo)) | 
|  | return -EBUSY; | 
|  |  | 
|  | if (usbhs_pipe_is_dcp(pipe)) { | 
|  | base |= (1 == write) << 5;	/* ISEL */ | 
|  |  | 
|  | if (usbhs_mod_is_host(priv)) | 
|  | usbhs_dcp_dir_for_host(pipe, write); | 
|  | } | 
|  |  | 
|  | /* "base" will be used below  */ | 
|  | usbhs_write(priv, fifo->sel, base | MBW_32); | 
|  |  | 
|  | /* check ISEL and CURPIPE value */ | 
|  | while (timeout--) { | 
|  | if (base == (mask & usbhs_read(priv, fifo->sel))) { | 
|  | usbhs_pipe_select_fifo(pipe, fifo); | 
|  | return 0; | 
|  | } | 
|  | udelay(10); | 
|  | } | 
|  |  | 
|  | dev_err(dev, "fifo select error\n"); | 
|  |  | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		DCP status stage | 
|  | */ | 
|  | static int usbhs_dcp_dir_switch_to_write(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | int ret; | 
|  |  | 
|  | usbhs_pipe_disable(pipe); | 
|  |  | 
|  | ret = usbhsf_fifo_select(pipe, fifo, 1); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "%s() faile\n", __func__); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | usbhs_pipe_sequence_data1(pipe); /* DATA1 */ | 
|  |  | 
|  | usbhsf_fifo_clear(pipe, fifo); | 
|  | usbhsf_send_terminator(pipe, fifo); | 
|  |  | 
|  | usbhsf_fifo_unselect(pipe, fifo); | 
|  |  | 
|  | usbhsf_tx_irq_ctrl(pipe, 1); | 
|  | usbhs_pipe_enable(pipe); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int usbhs_dcp_dir_switch_to_read(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | int ret; | 
|  |  | 
|  | usbhs_pipe_disable(pipe); | 
|  |  | 
|  | ret = usbhsf_fifo_select(pipe, fifo, 0); | 
|  | if (ret < 0) { | 
|  | dev_err(dev, "%s() fail\n", __func__); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | usbhs_pipe_sequence_data1(pipe); /* DATA1 */ | 
|  | usbhsf_fifo_clear(pipe, fifo); | 
|  |  | 
|  | usbhsf_fifo_unselect(pipe, fifo); | 
|  |  | 
|  | usbhsf_rx_irq_ctrl(pipe, 1); | 
|  | usbhs_pipe_enable(pipe); | 
|  |  | 
|  | return ret; | 
|  |  | 
|  | } | 
|  |  | 
|  | static int usbhs_dcp_dir_switch_done(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  |  | 
|  | if (pkt->handler == &usbhs_dcp_status_stage_in_handler) | 
|  | usbhsf_tx_irq_ctrl(pipe, 0); | 
|  | else | 
|  | usbhsf_rx_irq_ctrl(pipe, 0); | 
|  |  | 
|  | pkt->actual = pkt->length; | 
|  | *is_done = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | const struct usbhs_pkt_handle usbhs_dcp_status_stage_in_handler = { | 
|  | .prepare = usbhs_dcp_dir_switch_to_write, | 
|  | .try_run = usbhs_dcp_dir_switch_done, | 
|  | }; | 
|  |  | 
|  | const struct usbhs_pkt_handle usbhs_dcp_status_stage_out_handler = { | 
|  | .prepare = usbhs_dcp_dir_switch_to_read, | 
|  | .try_run = usbhs_dcp_dir_switch_done, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | *		DCP data stage (push) | 
|  | */ | 
|  | static int usbhsf_dcp_data_stage_try_push(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  |  | 
|  | usbhs_pipe_sequence_data1(pipe); /* DATA1 */ | 
|  |  | 
|  | /* | 
|  | * change handler to PIO push | 
|  | */ | 
|  | pkt->handler = &usbhs_fifo_pio_push_handler; | 
|  |  | 
|  | return pkt->handler->prepare(pkt, is_done); | 
|  | } | 
|  |  | 
|  | const struct usbhs_pkt_handle usbhs_dcp_data_stage_out_handler = { | 
|  | .prepare = usbhsf_dcp_data_stage_try_push, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | *		DCP data stage (pop) | 
|  | */ | 
|  | static int usbhsf_dcp_data_stage_prepare_pop(struct usbhs_pkt *pkt, | 
|  | int *is_done) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); | 
|  |  | 
|  | if (usbhs_pipe_is_busy(pipe)) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * prepare pop for DCP should | 
|  | *  - change DCP direction, | 
|  | *  - clear fifo | 
|  | *  - DATA1 | 
|  | */ | 
|  | usbhs_pipe_disable(pipe); | 
|  |  | 
|  | usbhs_pipe_sequence_data1(pipe); /* DATA1 */ | 
|  |  | 
|  | usbhsf_fifo_select(pipe, fifo, 0); | 
|  | usbhsf_fifo_clear(pipe, fifo); | 
|  | usbhsf_fifo_unselect(pipe, fifo); | 
|  |  | 
|  | /* | 
|  | * change handler to PIO pop | 
|  | */ | 
|  | pkt->handler = &usbhs_fifo_pio_pop_handler; | 
|  |  | 
|  | return pkt->handler->prepare(pkt, is_done); | 
|  | } | 
|  |  | 
|  | const struct usbhs_pkt_handle usbhs_dcp_data_stage_in_handler = { | 
|  | .prepare = usbhsf_dcp_data_stage_prepare_pop, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | *		PIO push handler | 
|  | */ | 
|  | static int usbhsf_pio_try_push(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ | 
|  | void __iomem *addr = priv->base + fifo->port; | 
|  | u8 *buf; | 
|  | int maxp = usbhs_pipe_get_maxpacket(pipe); | 
|  | int total_len; | 
|  | int i, ret, len; | 
|  | int is_short; | 
|  |  | 
|  | usbhs_pipe_data_sequence(pipe, pkt->sequence); | 
|  | pkt->sequence = -1; /* -1 sequence will be ignored */ | 
|  |  | 
|  | usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length); | 
|  |  | 
|  | ret = usbhsf_fifo_select(pipe, fifo, 1); | 
|  | if (ret < 0) | 
|  | return 0; | 
|  |  | 
|  | ret = usbhs_pipe_is_accessible(pipe); | 
|  | if (ret < 0) { | 
|  | /* inaccessible pipe is not an error */ | 
|  | ret = 0; | 
|  | goto usbhs_fifo_write_busy; | 
|  | } | 
|  |  | 
|  | ret = usbhsf_fifo_barrier(priv, fifo); | 
|  | if (ret < 0) | 
|  | goto usbhs_fifo_write_busy; | 
|  |  | 
|  | buf		= pkt->buf    + pkt->actual; | 
|  | len		= pkt->length - pkt->actual; | 
|  | len		= min(len, maxp); | 
|  | total_len	= len; | 
|  | is_short	= total_len < maxp; | 
|  |  | 
|  | /* | 
|  | * FIXME | 
|  | * | 
|  | * 32-bit access only | 
|  | */ | 
|  | if (len >= 4 && !((unsigned long)buf & 0x03)) { | 
|  | iowrite32_rep(addr, buf, len / 4); | 
|  | len %= 4; | 
|  | buf += total_len - len; | 
|  | } | 
|  |  | 
|  | /* the rest operation */ | 
|  | if (usbhs_get_dparam(priv, cfifo_byte_addr)) { | 
|  | for (i = 0; i < len; i++) | 
|  | iowrite8(buf[i], addr + (i & 0x03)); | 
|  | } else { | 
|  | for (i = 0; i < len; i++) | 
|  | iowrite8(buf[i], addr + (0x03 - (i & 0x03))); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * variable update | 
|  | */ | 
|  | pkt->actual += total_len; | 
|  |  | 
|  | if (pkt->actual < pkt->length) | 
|  | *is_done = 0;		/* there are remainder data */ | 
|  | else if (is_short) | 
|  | *is_done = 1;		/* short packet */ | 
|  | else | 
|  | *is_done = !pkt->zero;	/* send zero packet ? */ | 
|  |  | 
|  | /* | 
|  | * pipe/irq handling | 
|  | */ | 
|  | if (is_short) | 
|  | usbhsf_send_terminator(pipe, fifo); | 
|  |  | 
|  | usbhsf_tx_irq_ctrl(pipe, !*is_done); | 
|  | usbhs_pipe_running(pipe, !*is_done); | 
|  | usbhs_pipe_enable(pipe); | 
|  |  | 
|  | dev_dbg(dev, "  send %d (%d/ %d/ %d/ %d)\n", | 
|  | usbhs_pipe_number(pipe), | 
|  | pkt->length, pkt->actual, *is_done, pkt->zero); | 
|  |  | 
|  | usbhsf_fifo_unselect(pipe, fifo); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | usbhs_fifo_write_busy: | 
|  | usbhsf_fifo_unselect(pipe, fifo); | 
|  |  | 
|  | /* | 
|  | * pipe is busy. | 
|  | * retry in interrupt | 
|  | */ | 
|  | usbhsf_tx_irq_ctrl(pipe, 1); | 
|  | usbhs_pipe_running(pipe, 1); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int usbhsf_pio_prepare_push(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | if (usbhs_pipe_is_running(pkt->pipe)) | 
|  | return 0; | 
|  |  | 
|  | return usbhsf_pio_try_push(pkt, is_done); | 
|  | } | 
|  |  | 
|  | const struct usbhs_pkt_handle usbhs_fifo_pio_push_handler = { | 
|  | .prepare = usbhsf_pio_prepare_push, | 
|  | .try_run = usbhsf_pio_try_push, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | *		PIO pop handler | 
|  | */ | 
|  | static int usbhsf_prepare_pop(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); | 
|  |  | 
|  | if (usbhs_pipe_is_busy(pipe)) | 
|  | return 0; | 
|  |  | 
|  | if (usbhs_pipe_is_running(pipe)) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * pipe enable to prepare packet receive | 
|  | */ | 
|  | usbhs_pipe_data_sequence(pipe, pkt->sequence); | 
|  | pkt->sequence = -1; /* -1 sequence will be ignored */ | 
|  |  | 
|  | if (usbhs_pipe_is_dcp(pipe)) | 
|  | usbhsf_fifo_clear(pipe, fifo); | 
|  |  | 
|  | usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->length); | 
|  | usbhs_pipe_enable(pipe); | 
|  | usbhs_pipe_running(pipe, 1); | 
|  | usbhsf_rx_irq_ctrl(pipe, 1); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usbhsf_pio_try_pop(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ | 
|  | void __iomem *addr = priv->base + fifo->port; | 
|  | u8 *buf; | 
|  | u32 data = 0; | 
|  | int maxp = usbhs_pipe_get_maxpacket(pipe); | 
|  | int rcv_len, len; | 
|  | int i, ret; | 
|  | int total_len = 0; | 
|  |  | 
|  | ret = usbhsf_fifo_select(pipe, fifo, 0); | 
|  | if (ret < 0) | 
|  | return 0; | 
|  |  | 
|  | ret = usbhsf_fifo_barrier(priv, fifo); | 
|  | if (ret < 0) | 
|  | goto usbhs_fifo_read_busy; | 
|  |  | 
|  | rcv_len = usbhsf_fifo_rcv_len(priv, fifo); | 
|  |  | 
|  | buf		= pkt->buf    + pkt->actual; | 
|  | len		= pkt->length - pkt->actual; | 
|  | len		= min(len, rcv_len); | 
|  | total_len	= len; | 
|  |  | 
|  | /* | 
|  | * update actual length first here to decide disable pipe. | 
|  | * if this pipe keeps BUF status and all data were popped, | 
|  | * then, next interrupt/token will be issued again | 
|  | */ | 
|  | pkt->actual += total_len; | 
|  |  | 
|  | if ((pkt->actual == pkt->length) ||	/* receive all data */ | 
|  | (total_len < maxp)) {		/* short packet */ | 
|  | *is_done = 1; | 
|  | usbhsf_rx_irq_ctrl(pipe, 0); | 
|  | usbhs_pipe_running(pipe, 0); | 
|  | /* | 
|  | * If function mode, since this controller is possible to enter | 
|  | * Control Write status stage at this timing, this driver | 
|  | * should not disable the pipe. If such a case happens, this | 
|  | * controller is not able to complete the status stage. | 
|  | */ | 
|  | if (!usbhs_mod_is_host(priv) && !usbhs_pipe_is_dcp(pipe)) | 
|  | usbhs_pipe_disable(pipe);	/* disable pipe first */ | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Buffer clear if Zero-Length packet | 
|  | * | 
|  | * see | 
|  | * "Operation" - "FIFO Buffer Memory" - "FIFO Port Function" | 
|  | */ | 
|  | if (0 == rcv_len) { | 
|  | pkt->zero = 1; | 
|  | usbhsf_fifo_clear(pipe, fifo); | 
|  | goto usbhs_fifo_read_end; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * FIXME | 
|  | * | 
|  | * 32-bit access only | 
|  | */ | 
|  | if (len >= 4 && !((unsigned long)buf & 0x03)) { | 
|  | ioread32_rep(addr, buf, len / 4); | 
|  | len %= 4; | 
|  | buf += total_len - len; | 
|  | } | 
|  |  | 
|  | /* the rest operation */ | 
|  | for (i = 0; i < len; i++) { | 
|  | if (!(i & 0x03)) | 
|  | data = ioread32(addr); | 
|  |  | 
|  | buf[i] = (data >> ((i & 0x03) * 8)) & 0xff; | 
|  | } | 
|  |  | 
|  | usbhs_fifo_read_end: | 
|  | dev_dbg(dev, "  recv %d (%d/ %d/ %d/ %d)\n", | 
|  | usbhs_pipe_number(pipe), | 
|  | pkt->length, pkt->actual, *is_done, pkt->zero); | 
|  |  | 
|  | usbhs_fifo_read_busy: | 
|  | usbhsf_fifo_unselect(pipe, fifo); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | const struct usbhs_pkt_handle usbhs_fifo_pio_pop_handler = { | 
|  | .prepare = usbhsf_prepare_pop, | 
|  | .try_run = usbhsf_pio_try_pop, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | *		DCP ctrol statge handler | 
|  | */ | 
|  | static int usbhsf_ctrl_stage_end(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | usbhs_dcp_control_transfer_done(pkt->pipe); | 
|  |  | 
|  | *is_done = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | const struct usbhs_pkt_handle usbhs_ctrl_stage_end_handler = { | 
|  | .prepare = usbhsf_ctrl_stage_end, | 
|  | .try_run = usbhsf_ctrl_stage_end, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | *		DMA fifo functions | 
|  | */ | 
|  | static struct dma_chan *usbhsf_dma_chan_get(struct usbhs_fifo *fifo, | 
|  | struct usbhs_pkt *pkt) | 
|  | { | 
|  | if (&usbhs_fifo_dma_push_handler == pkt->handler) | 
|  | return fifo->tx_chan; | 
|  |  | 
|  | if (&usbhs_fifo_dma_pop_handler == pkt->handler) | 
|  | return fifo->rx_chan; | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static struct usbhs_fifo *usbhsf_get_dma_fifo(struct usbhs_priv *priv, | 
|  | struct usbhs_pkt *pkt) | 
|  | { | 
|  | struct usbhs_fifo *fifo; | 
|  | int i; | 
|  |  | 
|  | usbhs_for_each_dfifo(priv, fifo, i) { | 
|  | if (usbhsf_dma_chan_get(fifo, pkt) && | 
|  | !usbhsf_fifo_is_busy(fifo)) | 
|  | return fifo; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | #define usbhsf_dma_start(p, f)	__usbhsf_dma_ctrl(p, f, DREQE) | 
|  | #define usbhsf_dma_stop(p, f)	__usbhsf_dma_ctrl(p, f, 0) | 
|  | static void __usbhsf_dma_ctrl(struct usbhs_pipe *pipe, | 
|  | struct usbhs_fifo *fifo, | 
|  | u16 dreqe) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  |  | 
|  | usbhs_bset(priv, fifo->sel, DREQE, dreqe); | 
|  | } | 
|  |  | 
|  | static int __usbhsf_dma_map_ctrl(struct usbhs_pkt *pkt, int map) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct usbhs_pipe_info *info = usbhs_priv_to_pipeinfo(priv); | 
|  | struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe); | 
|  | struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt); | 
|  |  | 
|  | return info->dma_map_ctrl(chan->device->dev, pkt, map); | 
|  | } | 
|  |  | 
|  | static void usbhsf_dma_complete(void *arg); | 
|  | static void usbhsf_dma_xfer_preparing(struct usbhs_pkt *pkt) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  | struct usbhs_fifo *fifo; | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct dma_async_tx_descriptor *desc; | 
|  | struct dma_chan *chan; | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | enum dma_transfer_direction dir; | 
|  |  | 
|  | fifo = usbhs_pipe_to_fifo(pipe); | 
|  | if (!fifo) | 
|  | return; | 
|  |  | 
|  | chan = usbhsf_dma_chan_get(fifo, pkt); | 
|  | dir = usbhs_pipe_is_dir_in(pipe) ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV; | 
|  |  | 
|  | desc = dmaengine_prep_slave_single(chan, pkt->dma + pkt->actual, | 
|  | pkt->trans, dir, | 
|  | DMA_PREP_INTERRUPT | DMA_CTRL_ACK); | 
|  | if (!desc) | 
|  | return; | 
|  |  | 
|  | desc->callback		= usbhsf_dma_complete; | 
|  | desc->callback_param	= pipe; | 
|  |  | 
|  | pkt->cookie = dmaengine_submit(desc); | 
|  | if (pkt->cookie < 0) { | 
|  | dev_err(dev, "Failed to submit dma descriptor\n"); | 
|  | return; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "  %s %d (%d/ %d)\n", | 
|  | fifo->name, usbhs_pipe_number(pipe), pkt->length, pkt->zero); | 
|  |  | 
|  | usbhs_pipe_running(pipe, 1); | 
|  | usbhs_pipe_set_trans_count_if_bulk(pipe, pkt->trans); | 
|  | dma_async_issue_pending(chan); | 
|  | usbhsf_dma_start(pipe, fifo); | 
|  | usbhs_pipe_enable(pipe); | 
|  | } | 
|  |  | 
|  | static void xfer_work(struct work_struct *work) | 
|  | { | 
|  | struct usbhs_pkt *pkt = container_of(work, struct usbhs_pkt, work); | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | unsigned long flags; | 
|  |  | 
|  | usbhs_lock(priv, flags); | 
|  | usbhsf_dma_xfer_preparing(pkt); | 
|  | usbhs_unlock(priv, flags); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		DMA push handler | 
|  | */ | 
|  | static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct usbhs_fifo *fifo; | 
|  | int len = pkt->length - pkt->actual; | 
|  | int ret; | 
|  | uintptr_t align_mask; | 
|  |  | 
|  | if (usbhs_pipe_is_busy(pipe)) | 
|  | return 0; | 
|  |  | 
|  | /* use PIO if packet is less than pio_dma_border or pipe is DCP */ | 
|  | if ((len < usbhs_get_dparam(priv, pio_dma_border)) || | 
|  | usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC)) | 
|  | goto usbhsf_pio_prepare_push; | 
|  |  | 
|  | /* check data length if this driver don't use USB-DMAC */ | 
|  | if (!usbhs_get_dparam(priv, has_usb_dmac) && len & 0x7) | 
|  | goto usbhsf_pio_prepare_push; | 
|  |  | 
|  | /* check buffer alignment */ | 
|  | align_mask = usbhs_get_dparam(priv, has_usb_dmac) ? | 
|  | USBHS_USB_DMAC_XFER_SIZE - 1 : 0x7; | 
|  | if ((uintptr_t)(pkt->buf + pkt->actual) & align_mask) | 
|  | goto usbhsf_pio_prepare_push; | 
|  |  | 
|  | /* return at this time if the pipe is running */ | 
|  | if (usbhs_pipe_is_running(pipe)) | 
|  | return 0; | 
|  |  | 
|  | /* get enable DMA fifo */ | 
|  | fifo = usbhsf_get_dma_fifo(priv, pkt); | 
|  | if (!fifo) | 
|  | goto usbhsf_pio_prepare_push; | 
|  |  | 
|  | ret = usbhsf_fifo_select(pipe, fifo, 0); | 
|  | if (ret < 0) | 
|  | goto usbhsf_pio_prepare_push; | 
|  |  | 
|  | if (usbhsf_dma_map(pkt) < 0) | 
|  | goto usbhsf_pio_prepare_push_unselect; | 
|  |  | 
|  | pkt->trans = len; | 
|  |  | 
|  | usbhsf_tx_irq_ctrl(pipe, 0); | 
|  | /* FIXME: Workaound for usb dmac that driver can be used in atomic */ | 
|  | if (usbhs_get_dparam(priv, has_usb_dmac)) { | 
|  | usbhsf_dma_xfer_preparing(pkt); | 
|  | } else { | 
|  | INIT_WORK(&pkt->work, xfer_work); | 
|  | schedule_work(&pkt->work); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | usbhsf_pio_prepare_push_unselect: | 
|  | usbhsf_fifo_unselect(pipe, fifo); | 
|  | usbhsf_pio_prepare_push: | 
|  | /* | 
|  | * change handler to PIO | 
|  | */ | 
|  | pkt->handler = &usbhs_fifo_pio_push_handler; | 
|  |  | 
|  | return pkt->handler->prepare(pkt, is_done); | 
|  | } | 
|  |  | 
|  | static int usbhsf_dma_push_done(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  | int is_short = pkt->trans % usbhs_pipe_get_maxpacket(pipe); | 
|  |  | 
|  | pkt->actual += pkt->trans; | 
|  |  | 
|  | if (pkt->actual < pkt->length) | 
|  | *is_done = 0;		/* there are remainder data */ | 
|  | else if (is_short) | 
|  | *is_done = 1;		/* short packet */ | 
|  | else | 
|  | *is_done = !pkt->zero;	/* send zero packet? */ | 
|  |  | 
|  | usbhs_pipe_running(pipe, !*is_done); | 
|  |  | 
|  | usbhsf_dma_stop(pipe, pipe->fifo); | 
|  | usbhsf_dma_unmap(pkt); | 
|  | usbhsf_fifo_unselect(pipe, pipe->fifo); | 
|  |  | 
|  | if (!*is_done) { | 
|  | /* change handler to PIO */ | 
|  | pkt->handler = &usbhs_fifo_pio_push_handler; | 
|  | return pkt->handler->try_run(pkt, is_done); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | const struct usbhs_pkt_handle usbhs_fifo_dma_push_handler = { | 
|  | .prepare	= usbhsf_dma_prepare_push, | 
|  | .dma_done	= usbhsf_dma_push_done, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | *		DMA pop handler | 
|  | */ | 
|  |  | 
|  | static int usbhsf_dma_prepare_pop_with_rx_irq(struct usbhs_pkt *pkt, | 
|  | int *is_done) | 
|  | { | 
|  | return usbhsf_prepare_pop(pkt, is_done); | 
|  | } | 
|  |  | 
|  | static int usbhsf_dma_prepare_pop_with_usb_dmac(struct usbhs_pkt *pkt, | 
|  | int *is_done) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct usbhs_fifo *fifo; | 
|  | int ret; | 
|  |  | 
|  | if (usbhs_pipe_is_busy(pipe)) | 
|  | return 0; | 
|  |  | 
|  | /* use PIO if packet is less than pio_dma_border or pipe is DCP */ | 
|  | if ((pkt->length < usbhs_get_dparam(priv, pio_dma_border)) || | 
|  | usbhs_pipe_type_is(pipe, USB_ENDPOINT_XFER_ISOC)) | 
|  | goto usbhsf_pio_prepare_pop; | 
|  |  | 
|  | fifo = usbhsf_get_dma_fifo(priv, pkt); | 
|  | if (!fifo) | 
|  | goto usbhsf_pio_prepare_pop; | 
|  |  | 
|  | if ((uintptr_t)pkt->buf & (USBHS_USB_DMAC_XFER_SIZE - 1)) | 
|  | goto usbhsf_pio_prepare_pop; | 
|  |  | 
|  | /* return at this time if the pipe is running */ | 
|  | if (usbhs_pipe_is_running(pipe)) | 
|  | return 0; | 
|  |  | 
|  | usbhs_pipe_config_change_bfre(pipe, 1); | 
|  |  | 
|  | ret = usbhsf_fifo_select(pipe, fifo, 0); | 
|  | if (ret < 0) | 
|  | goto usbhsf_pio_prepare_pop; | 
|  |  | 
|  | if (usbhsf_dma_map(pkt) < 0) | 
|  | goto usbhsf_pio_prepare_pop_unselect; | 
|  |  | 
|  | /* DMA */ | 
|  |  | 
|  | /* | 
|  | * usbhs_fifo_dma_pop_handler :: prepare | 
|  | * enabled irq to come here. | 
|  | * but it is no longer needed for DMA. disable it. | 
|  | */ | 
|  | usbhsf_rx_irq_ctrl(pipe, 0); | 
|  |  | 
|  | pkt->trans = pkt->length; | 
|  |  | 
|  | usbhsf_dma_xfer_preparing(pkt); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | usbhsf_pio_prepare_pop_unselect: | 
|  | usbhsf_fifo_unselect(pipe, fifo); | 
|  | usbhsf_pio_prepare_pop: | 
|  |  | 
|  | /* | 
|  | * change handler to PIO | 
|  | */ | 
|  | pkt->handler = &usbhs_fifo_pio_pop_handler; | 
|  | usbhs_pipe_config_change_bfre(pipe, 0); | 
|  |  | 
|  | return pkt->handler->prepare(pkt, is_done); | 
|  | } | 
|  |  | 
|  | static int usbhsf_dma_prepare_pop(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); | 
|  |  | 
|  | if (usbhs_get_dparam(priv, has_usb_dmac)) | 
|  | return usbhsf_dma_prepare_pop_with_usb_dmac(pkt, is_done); | 
|  | else | 
|  | return usbhsf_dma_prepare_pop_with_rx_irq(pkt, is_done); | 
|  | } | 
|  |  | 
|  | static int usbhsf_dma_try_pop_with_rx_irq(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct usbhs_fifo *fifo; | 
|  | int len, ret; | 
|  |  | 
|  | if (usbhs_pipe_is_busy(pipe)) | 
|  | return 0; | 
|  |  | 
|  | if (usbhs_pipe_is_dcp(pipe)) | 
|  | goto usbhsf_pio_prepare_pop; | 
|  |  | 
|  | /* get enable DMA fifo */ | 
|  | fifo = usbhsf_get_dma_fifo(priv, pkt); | 
|  | if (!fifo) | 
|  | goto usbhsf_pio_prepare_pop; | 
|  |  | 
|  | if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ | 
|  | goto usbhsf_pio_prepare_pop; | 
|  |  | 
|  | ret = usbhsf_fifo_select(pipe, fifo, 0); | 
|  | if (ret < 0) | 
|  | goto usbhsf_pio_prepare_pop; | 
|  |  | 
|  | /* use PIO if packet is less than pio_dma_border */ | 
|  | len = usbhsf_fifo_rcv_len(priv, fifo); | 
|  | len = min(pkt->length - pkt->actual, len); | 
|  | if (len & 0x7) /* 8byte alignment */ | 
|  | goto usbhsf_pio_prepare_pop_unselect; | 
|  |  | 
|  | if (len < usbhs_get_dparam(priv, pio_dma_border)) | 
|  | goto usbhsf_pio_prepare_pop_unselect; | 
|  |  | 
|  | ret = usbhsf_fifo_barrier(priv, fifo); | 
|  | if (ret < 0) | 
|  | goto usbhsf_pio_prepare_pop_unselect; | 
|  |  | 
|  | if (usbhsf_dma_map(pkt) < 0) | 
|  | goto usbhsf_pio_prepare_pop_unselect; | 
|  |  | 
|  | /* DMA */ | 
|  |  | 
|  | /* | 
|  | * usbhs_fifo_dma_pop_handler :: prepare | 
|  | * enabled irq to come here. | 
|  | * but it is no longer needed for DMA. disable it. | 
|  | */ | 
|  | usbhsf_rx_irq_ctrl(pipe, 0); | 
|  |  | 
|  | pkt->trans = len; | 
|  |  | 
|  | INIT_WORK(&pkt->work, xfer_work); | 
|  | schedule_work(&pkt->work); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | usbhsf_pio_prepare_pop_unselect: | 
|  | usbhsf_fifo_unselect(pipe, fifo); | 
|  | usbhsf_pio_prepare_pop: | 
|  |  | 
|  | /* | 
|  | * change handler to PIO | 
|  | */ | 
|  | pkt->handler = &usbhs_fifo_pio_pop_handler; | 
|  |  | 
|  | return pkt->handler->try_run(pkt, is_done); | 
|  | } | 
|  |  | 
|  | static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); | 
|  |  | 
|  | BUG_ON(usbhs_get_dparam(priv, has_usb_dmac)); | 
|  |  | 
|  | return usbhsf_dma_try_pop_with_rx_irq(pkt, is_done); | 
|  | } | 
|  |  | 
|  | static int usbhsf_dma_pop_done_with_rx_irq(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  | int maxp = usbhs_pipe_get_maxpacket(pipe); | 
|  |  | 
|  | usbhsf_dma_stop(pipe, pipe->fifo); | 
|  | usbhsf_dma_unmap(pkt); | 
|  | usbhsf_fifo_unselect(pipe, pipe->fifo); | 
|  |  | 
|  | pkt->actual += pkt->trans; | 
|  |  | 
|  | if ((pkt->actual == pkt->length) ||	/* receive all data */ | 
|  | (pkt->trans < maxp)) {		/* short packet */ | 
|  | *is_done = 1; | 
|  | usbhs_pipe_running(pipe, 0); | 
|  | } else { | 
|  | /* re-enable */ | 
|  | usbhs_pipe_running(pipe, 0); | 
|  | usbhsf_prepare_pop(pkt, is_done); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static size_t usbhs_dma_calc_received_size(struct usbhs_pkt *pkt, | 
|  | struct dma_chan *chan, int dtln) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  | struct dma_tx_state state; | 
|  | size_t received_size; | 
|  | int maxp = usbhs_pipe_get_maxpacket(pipe); | 
|  |  | 
|  | dmaengine_tx_status(chan, pkt->cookie, &state); | 
|  | received_size = pkt->length - state.residue; | 
|  |  | 
|  | if (dtln) { | 
|  | received_size -= USBHS_USB_DMAC_XFER_SIZE; | 
|  | received_size &= ~(maxp - 1); | 
|  | received_size += dtln; | 
|  | } | 
|  |  | 
|  | return received_size; | 
|  | } | 
|  |  | 
|  | static int usbhsf_dma_pop_done_with_usb_dmac(struct usbhs_pkt *pkt, | 
|  | int *is_done) | 
|  | { | 
|  | struct usbhs_pipe *pipe = pkt->pipe; | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct usbhs_fifo *fifo = usbhs_pipe_to_fifo(pipe); | 
|  | struct dma_chan *chan = usbhsf_dma_chan_get(fifo, pkt); | 
|  | int rcv_len; | 
|  |  | 
|  | /* | 
|  | * Since the driver disables rx_irq in DMA mode, the interrupt handler | 
|  | * cannot the BRDYSTS. So, the function clears it here because the | 
|  | * driver may use PIO mode next time. | 
|  | */ | 
|  | usbhs_xxxsts_clear(priv, BRDYSTS, usbhs_pipe_number(pipe)); | 
|  |  | 
|  | rcv_len = usbhsf_fifo_rcv_len(priv, fifo); | 
|  | usbhsf_fifo_clear(pipe, fifo); | 
|  | pkt->actual = usbhs_dma_calc_received_size(pkt, chan, rcv_len); | 
|  |  | 
|  | usbhs_pipe_running(pipe, 0); | 
|  | usbhsf_dma_stop(pipe, fifo); | 
|  | usbhsf_dma_unmap(pkt); | 
|  | usbhsf_fifo_unselect(pipe, pipe->fifo); | 
|  |  | 
|  | /* The driver can assume the rx transaction is always "done" */ | 
|  | *is_done = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usbhsf_dma_pop_done(struct usbhs_pkt *pkt, int *is_done) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pkt->pipe); | 
|  |  | 
|  | if (usbhs_get_dparam(priv, has_usb_dmac)) | 
|  | return usbhsf_dma_pop_done_with_usb_dmac(pkt, is_done); | 
|  | else | 
|  | return usbhsf_dma_pop_done_with_rx_irq(pkt, is_done); | 
|  | } | 
|  |  | 
|  | const struct usbhs_pkt_handle usbhs_fifo_dma_pop_handler = { | 
|  | .prepare	= usbhsf_dma_prepare_pop, | 
|  | .try_run	= usbhsf_dma_try_pop, | 
|  | .dma_done	= usbhsf_dma_pop_done | 
|  | }; | 
|  |  | 
|  | /* | 
|  | *		DMA setting | 
|  | */ | 
|  | static bool usbhsf_dma_filter(struct dma_chan *chan, void *param) | 
|  | { | 
|  | struct sh_dmae_slave *slave = param; | 
|  |  | 
|  | /* | 
|  | * FIXME | 
|  | * | 
|  | * usbhs doesn't recognize id = 0 as valid DMA | 
|  | */ | 
|  | if (0 == slave->shdma_slave.slave_id) | 
|  | return false; | 
|  |  | 
|  | chan->private = slave; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static void usbhsf_dma_quit(struct usbhs_priv *priv, struct usbhs_fifo *fifo) | 
|  | { | 
|  | if (fifo->tx_chan) | 
|  | dma_release_channel(fifo->tx_chan); | 
|  | if (fifo->rx_chan) | 
|  | dma_release_channel(fifo->rx_chan); | 
|  |  | 
|  | fifo->tx_chan = NULL; | 
|  | fifo->rx_chan = NULL; | 
|  | } | 
|  |  | 
|  | static void usbhsf_dma_init_pdev(struct usbhs_fifo *fifo) | 
|  | { | 
|  | dma_cap_mask_t mask; | 
|  |  | 
|  | dma_cap_zero(mask); | 
|  | dma_cap_set(DMA_SLAVE, mask); | 
|  | fifo->tx_chan = dma_request_channel(mask, usbhsf_dma_filter, | 
|  | &fifo->tx_slave); | 
|  |  | 
|  | dma_cap_zero(mask); | 
|  | dma_cap_set(DMA_SLAVE, mask); | 
|  | fifo->rx_chan = dma_request_channel(mask, usbhsf_dma_filter, | 
|  | &fifo->rx_slave); | 
|  | } | 
|  |  | 
|  | static void usbhsf_dma_init_dt(struct device *dev, struct usbhs_fifo *fifo, | 
|  | int channel) | 
|  | { | 
|  | char name[16]; | 
|  |  | 
|  | /* | 
|  | * To avoid complex handing for DnFIFOs, the driver uses each | 
|  | * DnFIFO as TX or RX direction (not bi-direction). | 
|  | * So, the driver uses odd channels for TX, even channels for RX. | 
|  | */ | 
|  | snprintf(name, sizeof(name), "ch%d", channel); | 
|  | if (channel & 1) { | 
|  | fifo->tx_chan = dma_request_slave_channel_reason(dev, name); | 
|  | if (IS_ERR(fifo->tx_chan)) | 
|  | fifo->tx_chan = NULL; | 
|  | } else { | 
|  | fifo->rx_chan = dma_request_slave_channel_reason(dev, name); | 
|  | if (IS_ERR(fifo->rx_chan)) | 
|  | fifo->rx_chan = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | static void usbhsf_dma_init(struct usbhs_priv *priv, struct usbhs_fifo *fifo, | 
|  | int channel) | 
|  | { | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  |  | 
|  | if (dev_of_node(dev)) | 
|  | usbhsf_dma_init_dt(dev, fifo, channel); | 
|  | else | 
|  | usbhsf_dma_init_pdev(fifo); | 
|  |  | 
|  | if (fifo->tx_chan || fifo->rx_chan) | 
|  | dev_dbg(dev, "enable DMAEngine (%s%s%s)\n", | 
|  | fifo->name, | 
|  | fifo->tx_chan ? "[TX]" : "    ", | 
|  | fifo->rx_chan ? "[RX]" : "    "); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		irq functions | 
|  | */ | 
|  | static int usbhsf_irq_empty(struct usbhs_priv *priv, | 
|  | struct usbhs_irq_state *irq_state) | 
|  | { | 
|  | struct usbhs_pipe *pipe; | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | int i, ret; | 
|  |  | 
|  | if (!irq_state->bempsts) { | 
|  | dev_err(dev, "debug %s !!\n", __func__); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "irq empty [0x%04x]\n", irq_state->bempsts); | 
|  |  | 
|  | /* | 
|  | * search interrupted "pipe" | 
|  | * not "uep". | 
|  | */ | 
|  | usbhs_for_each_pipe_with_dcp(pipe, priv, i) { | 
|  | if (!(irq_state->bempsts & (1 << i))) | 
|  | continue; | 
|  |  | 
|  | ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_TRY_RUN); | 
|  | if (ret < 0) | 
|  | dev_err(dev, "irq_empty run_error %d : %d\n", i, ret); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usbhsf_irq_ready(struct usbhs_priv *priv, | 
|  | struct usbhs_irq_state *irq_state) | 
|  | { | 
|  | struct usbhs_pipe *pipe; | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | int i, ret; | 
|  |  | 
|  | if (!irq_state->brdysts) { | 
|  | dev_err(dev, "debug %s !!\n", __func__); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "irq ready [0x%04x]\n", irq_state->brdysts); | 
|  |  | 
|  | /* | 
|  | * search interrupted "pipe" | 
|  | * not "uep". | 
|  | */ | 
|  | usbhs_for_each_pipe_with_dcp(pipe, priv, i) { | 
|  | if (!(irq_state->brdysts & (1 << i))) | 
|  | continue; | 
|  |  | 
|  | ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_TRY_RUN); | 
|  | if (ret < 0) | 
|  | dev_err(dev, "irq_ready run_error %d : %d\n", i, ret); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void usbhsf_dma_complete(void *arg) | 
|  | { | 
|  | struct usbhs_pipe *pipe = arg; | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct device *dev = usbhs_priv_to_dev(priv); | 
|  | int ret; | 
|  |  | 
|  | ret = usbhsf_pkt_handler(pipe, USBHSF_PKT_DMA_DONE); | 
|  | if (ret < 0) | 
|  | dev_err(dev, "dma_complete run_error %d : %d\n", | 
|  | usbhs_pipe_number(pipe), ret); | 
|  | } | 
|  |  | 
|  | void usbhs_fifo_clear_dcp(struct usbhs_pipe *pipe) | 
|  | { | 
|  | struct usbhs_priv *priv = usbhs_pipe_to_priv(pipe); | 
|  | struct usbhs_fifo *fifo = usbhsf_get_cfifo(priv); /* CFIFO */ | 
|  |  | 
|  | /* clear DCP FIFO of transmission */ | 
|  | if (usbhsf_fifo_select(pipe, fifo, 1) < 0) | 
|  | return; | 
|  | usbhsf_fifo_clear(pipe, fifo); | 
|  | usbhsf_fifo_unselect(pipe, fifo); | 
|  |  | 
|  | /* clear DCP FIFO of reception */ | 
|  | if (usbhsf_fifo_select(pipe, fifo, 0) < 0) | 
|  | return; | 
|  | usbhsf_fifo_clear(pipe, fifo); | 
|  | usbhsf_fifo_unselect(pipe, fifo); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *		fifo init | 
|  | */ | 
|  | void usbhs_fifo_init(struct usbhs_priv *priv) | 
|  | { | 
|  | struct usbhs_mod *mod = usbhs_mod_get_current(priv); | 
|  | struct usbhs_fifo *cfifo = usbhsf_get_cfifo(priv); | 
|  | struct usbhs_fifo *dfifo; | 
|  | int i; | 
|  |  | 
|  | mod->irq_empty		= usbhsf_irq_empty; | 
|  | mod->irq_ready		= usbhsf_irq_ready; | 
|  | mod->irq_bempsts	= 0; | 
|  | mod->irq_brdysts	= 0; | 
|  |  | 
|  | cfifo->pipe	= NULL; | 
|  | usbhs_for_each_dfifo(priv, dfifo, i) | 
|  | dfifo->pipe	= NULL; | 
|  | } | 
|  |  | 
|  | void usbhs_fifo_quit(struct usbhs_priv *priv) | 
|  | { | 
|  | struct usbhs_mod *mod = usbhs_mod_get_current(priv); | 
|  |  | 
|  | mod->irq_empty		= NULL; | 
|  | mod->irq_ready		= NULL; | 
|  | mod->irq_bempsts	= 0; | 
|  | mod->irq_brdysts	= 0; | 
|  | } | 
|  |  | 
|  | #define __USBHS_DFIFO_INIT(priv, fifo, channel, fifo_port)		\ | 
|  | do {									\ | 
|  | fifo = usbhsf_get_dnfifo(priv, channel);			\ | 
|  | fifo->name	= "D"#channel"FIFO";				\ | 
|  | fifo->port	= fifo_port;					\ | 
|  | fifo->sel	= D##channel##FIFOSEL;				\ | 
|  | fifo->ctr	= D##channel##FIFOCTR;				\ | 
|  | fifo->tx_slave.shdma_slave.slave_id =				\ | 
|  | usbhs_get_dparam(priv, d##channel##_tx_id);	\ | 
|  | fifo->rx_slave.shdma_slave.slave_id =				\ | 
|  | usbhs_get_dparam(priv, d##channel##_rx_id);	\ | 
|  | usbhsf_dma_init(priv, fifo, channel);				\ | 
|  | } while (0) | 
|  |  | 
|  | #define USBHS_DFIFO_INIT(priv, fifo, channel)				\ | 
|  | __USBHS_DFIFO_INIT(priv, fifo, channel, D##channel##FIFO) | 
|  | #define USBHS_DFIFO_INIT_NO_PORT(priv, fifo, channel)			\ | 
|  | __USBHS_DFIFO_INIT(priv, fifo, channel, 0) | 
|  |  | 
|  | int usbhs_fifo_probe(struct usbhs_priv *priv) | 
|  | { | 
|  | struct usbhs_fifo *fifo; | 
|  |  | 
|  | /* CFIFO */ | 
|  | fifo = usbhsf_get_cfifo(priv); | 
|  | fifo->name	= "CFIFO"; | 
|  | fifo->port	= CFIFO; | 
|  | fifo->sel	= CFIFOSEL; | 
|  | fifo->ctr	= CFIFOCTR; | 
|  |  | 
|  | /* DFIFO */ | 
|  | USBHS_DFIFO_INIT(priv, fifo, 0); | 
|  | USBHS_DFIFO_INIT(priv, fifo, 1); | 
|  | USBHS_DFIFO_INIT_NO_PORT(priv, fifo, 2); | 
|  | USBHS_DFIFO_INIT_NO_PORT(priv, fifo, 3); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | void usbhs_fifo_remove(struct usbhs_priv *priv) | 
|  | { | 
|  | struct usbhs_fifo *fifo; | 
|  | int i; | 
|  |  | 
|  | usbhs_for_each_dfifo(priv, fifo, i) | 
|  | usbhsf_dma_quit(priv, fifo); | 
|  | } |