|  | /* | 
|  | * Qualcomm Serial USB driver | 
|  | * | 
|  | *	Copyright (c) 2008 QUALCOMM Incorporated. | 
|  | *	Copyright (c) 2009 Greg Kroah-Hartman <[email protected]> | 
|  | *	Copyright (c) 2009 Novell Inc. | 
|  | * | 
|  | *	This program is free software; you can redistribute it and/or | 
|  | *	modify it under the terms of the GNU General Public License version | 
|  | *	2 as published by the Free Software Foundation. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/tty.h> | 
|  | #include <linux/tty_flip.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/usb/serial.h> | 
|  | #include <linux/slab.h> | 
|  | #include "usb-wwan.h" | 
|  |  | 
|  | #define DRIVER_AUTHOR "Qualcomm Inc" | 
|  | #define DRIVER_DESC "Qualcomm USB Serial driver" | 
|  |  | 
|  | static int debug; | 
|  |  | 
|  | static const struct usb_device_id id_table[] = { | 
|  | {USB_DEVICE(0x05c6, 0x9211)},	/* Acer Gobi QDL device */ | 
|  | {USB_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */ | 
|  | {USB_DEVICE(0x03f0, 0x1f1d)},	/* HP un2400 Gobi Modem Device */ | 
|  | {USB_DEVICE(0x03f0, 0x201d)},	/* HP un2400 Gobi QDL Device */ | 
|  | {USB_DEVICE(0x04da, 0x250d)},	/* Panasonic Gobi Modem device */ | 
|  | {USB_DEVICE(0x04da, 0x250c)},	/* Panasonic Gobi QDL device */ | 
|  | {USB_DEVICE(0x413c, 0x8172)},	/* Dell Gobi Modem device */ | 
|  | {USB_DEVICE(0x413c, 0x8171)},	/* Dell Gobi QDL device */ | 
|  | {USB_DEVICE(0x1410, 0xa001)},	/* Novatel Gobi Modem device */ | 
|  | {USB_DEVICE(0x1410, 0xa008)},	/* Novatel Gobi QDL device */ | 
|  | {USB_DEVICE(0x0b05, 0x1776)},	/* Asus Gobi Modem device */ | 
|  | {USB_DEVICE(0x0b05, 0x1774)},	/* Asus Gobi QDL device */ | 
|  | {USB_DEVICE(0x19d2, 0xfff3)},	/* ONDA Gobi Modem device */ | 
|  | {USB_DEVICE(0x19d2, 0xfff2)},	/* ONDA Gobi QDL device */ | 
|  | {USB_DEVICE(0x1557, 0x0a80)},	/* OQO Gobi QDL device */ | 
|  | {USB_DEVICE(0x05c6, 0x9001)},   /* Generic Gobi Modem device */ | 
|  | {USB_DEVICE(0x05c6, 0x9002)},	/* Generic Gobi Modem device */ | 
|  | {USB_DEVICE(0x05c6, 0x9202)},	/* Generic Gobi Modem device */ | 
|  | {USB_DEVICE(0x05c6, 0x9203)},	/* Generic Gobi Modem device */ | 
|  | {USB_DEVICE(0x05c6, 0x9222)},	/* Generic Gobi Modem device */ | 
|  | {USB_DEVICE(0x05c6, 0x9008)},	/* Generic Gobi QDL device */ | 
|  | {USB_DEVICE(0x05c6, 0x9201)},	/* Generic Gobi QDL device */ | 
|  | {USB_DEVICE(0x05c6, 0x9221)},	/* Generic Gobi QDL device */ | 
|  | {USB_DEVICE(0x05c6, 0x9231)},	/* Generic Gobi QDL device */ | 
|  | {USB_DEVICE(0x1f45, 0x0001)},	/* Unknown Gobi QDL device */ | 
|  | {USB_DEVICE(0x413c, 0x8185)},	/* Dell Gobi 2000 QDL device (N0218, VU936) */ | 
|  | {USB_DEVICE(0x413c, 0x8186)},	/* Dell Gobi 2000 Modem device (N0218, VU936) */ | 
|  | {USB_DEVICE(0x05c6, 0x9208)},	/* Generic Gobi 2000 QDL device */ | 
|  | {USB_DEVICE(0x05c6, 0x920b)},	/* Generic Gobi 2000 Modem device */ | 
|  | {USB_DEVICE(0x05c6, 0x9224)},	/* Sony Gobi 2000 QDL device (N0279, VU730) */ | 
|  | {USB_DEVICE(0x05c6, 0x9225)},	/* Sony Gobi 2000 Modem device (N0279, VU730) */ | 
|  | {USB_DEVICE(0x05c6, 0x9244)},	/* Samsung Gobi 2000 QDL device (VL176) */ | 
|  | {USB_DEVICE(0x05c6, 0x9245)},	/* Samsung Gobi 2000 Modem device (VL176) */ | 
|  | {USB_DEVICE(0x03f0, 0x241d)},	/* HP Gobi 2000 QDL device (VP412) */ | 
|  | {USB_DEVICE(0x03f0, 0x251d)},	/* HP Gobi 2000 Modem device (VP412) */ | 
|  | {USB_DEVICE(0x05c6, 0x9214)},	/* Acer Gobi 2000 QDL device (VP413) */ | 
|  | {USB_DEVICE(0x05c6, 0x9215)},	/* Acer Gobi 2000 Modem device (VP413) */ | 
|  | {USB_DEVICE(0x05c6, 0x9264)},	/* Asus Gobi 2000 QDL device (VR305) */ | 
|  | {USB_DEVICE(0x05c6, 0x9265)},	/* Asus Gobi 2000 Modem device (VR305) */ | 
|  | {USB_DEVICE(0x05c6, 0x9234)},	/* Top Global Gobi 2000 QDL device (VR306) */ | 
|  | {USB_DEVICE(0x05c6, 0x9235)},	/* Top Global Gobi 2000 Modem device (VR306) */ | 
|  | {USB_DEVICE(0x05c6, 0x9274)},	/* iRex Technologies Gobi 2000 QDL device (VR307) */ | 
|  | {USB_DEVICE(0x05c6, 0x9275)},	/* iRex Technologies Gobi 2000 Modem device (VR307) */ | 
|  | {USB_DEVICE(0x1199, 0x9000)},	/* Sierra Wireless Gobi 2000 QDL device (VT773) */ | 
|  | {USB_DEVICE(0x1199, 0x9001)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {USB_DEVICE(0x1199, 0x9002)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {USB_DEVICE(0x1199, 0x9003)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {USB_DEVICE(0x1199, 0x9004)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {USB_DEVICE(0x1199, 0x9005)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {USB_DEVICE(0x1199, 0x9006)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {USB_DEVICE(0x1199, 0x9007)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {USB_DEVICE(0x1199, 0x9008)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {USB_DEVICE(0x1199, 0x9009)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {USB_DEVICE(0x1199, 0x900a)},	/* Sierra Wireless Gobi 2000 Modem device (VT773) */ | 
|  | {USB_DEVICE(0x16d8, 0x8001)},	/* CMDTech Gobi 2000 QDL device (VU922) */ | 
|  | {USB_DEVICE(0x16d8, 0x8002)},	/* CMDTech Gobi 2000 Modem device (VU922) */ | 
|  | {USB_DEVICE(0x05c6, 0x9204)},	/* Gobi 2000 QDL device */ | 
|  | {USB_DEVICE(0x05c6, 0x9205)},	/* Gobi 2000 Modem device */ | 
|  | { }				/* Terminating entry */ | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(usb, id_table); | 
|  |  | 
|  | static struct usb_driver qcdriver = { | 
|  | .name			= "qcserial", | 
|  | .probe			= usb_serial_probe, | 
|  | .disconnect		= usb_serial_disconnect, | 
|  | .id_table		= id_table, | 
|  | .suspend		= usb_serial_suspend, | 
|  | .resume			= usb_serial_resume, | 
|  | .supports_autosuspend	= true, | 
|  | }; | 
|  |  | 
|  | static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) | 
|  | { | 
|  | struct usb_wwan_intf_private *data; | 
|  | struct usb_host_interface *intf = serial->interface->cur_altsetting; | 
|  | int retval = -ENODEV; | 
|  | __u8 nintf; | 
|  | __u8 ifnum; | 
|  |  | 
|  | dbg("%s", __func__); | 
|  |  | 
|  | nintf = serial->dev->actconfig->desc.bNumInterfaces; | 
|  | dbg("Num Interfaces = %d", nintf); | 
|  | ifnum = intf->desc.bInterfaceNumber; | 
|  | dbg("This Interface = %d", ifnum); | 
|  |  | 
|  | data = kzalloc(sizeof(struct usb_wwan_intf_private), | 
|  | GFP_KERNEL); | 
|  | if (!data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | spin_lock_init(&data->susp_lock); | 
|  |  | 
|  | usb_enable_autosuspend(serial->dev); | 
|  |  | 
|  | switch (nintf) { | 
|  | case 1: | 
|  | /* QDL mode */ | 
|  | /* Gobi 2000 has a single altsetting, older ones have two */ | 
|  | if (serial->interface->num_altsetting == 2) | 
|  | intf = &serial->interface->altsetting[1]; | 
|  | else if (serial->interface->num_altsetting > 2) | 
|  | break; | 
|  |  | 
|  | if (intf->desc.bNumEndpoints == 2 && | 
|  | usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) && | 
|  | usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) { | 
|  | dbg("QDL port found"); | 
|  |  | 
|  | if (serial->interface->num_altsetting == 1) { | 
|  | retval = 0; /* Success */ | 
|  | break; | 
|  | } | 
|  |  | 
|  | retval = usb_set_interface(serial->dev, ifnum, 1); | 
|  | if (retval < 0) { | 
|  | dev_err(&serial->dev->dev, | 
|  | "Could not set interface, error %d\n", | 
|  | retval); | 
|  | retval = -ENODEV; | 
|  | kfree(data); | 
|  | } | 
|  | } | 
|  | break; | 
|  |  | 
|  | case 3: | 
|  | case 4: | 
|  | /* Composite mode */ | 
|  | /* ifnum == 0 is a broadband network adapter */ | 
|  | if (ifnum == 1) { | 
|  | /* | 
|  | * Diagnostics Monitor (serial line 9600 8N1) | 
|  | * Qualcomm DM protocol | 
|  | * use "libqcdm" (ModemManager) for communication | 
|  | */ | 
|  | dbg("Diagnostics Monitor found"); | 
|  | retval = usb_set_interface(serial->dev, ifnum, 0); | 
|  | if (retval < 0) { | 
|  | dev_err(&serial->dev->dev, | 
|  | "Could not set interface, error %d\n", | 
|  | retval); | 
|  | retval = -ENODEV; | 
|  | kfree(data); | 
|  | } | 
|  | } else if (ifnum == 2) { | 
|  | dbg("Modem port found"); | 
|  | retval = usb_set_interface(serial->dev, ifnum, 0); | 
|  | if (retval < 0) { | 
|  | dev_err(&serial->dev->dev, | 
|  | "Could not set interface, error %d\n", | 
|  | retval); | 
|  | retval = -ENODEV; | 
|  | kfree(data); | 
|  | } | 
|  | } else if (ifnum==3) { | 
|  | /* | 
|  | * NMEA (serial line 9600 8N1) | 
|  | * # echo "\$GPS_START" > /dev/ttyUSBx | 
|  | * # echo "\$GPS_STOP"  > /dev/ttyUSBx | 
|  | */ | 
|  | dbg("NMEA GPS interface found"); | 
|  | retval = usb_set_interface(serial->dev, ifnum, 0); | 
|  | if (retval < 0) { | 
|  | dev_err(&serial->dev->dev, | 
|  | "Could not set interface, error %d\n", | 
|  | retval); | 
|  | retval = -ENODEV; | 
|  | kfree(data); | 
|  | } | 
|  | } | 
|  | break; | 
|  |  | 
|  | default: | 
|  | dev_err(&serial->dev->dev, | 
|  | "unknown number of interfaces: %d\n", nintf); | 
|  | kfree(data); | 
|  | retval = -ENODEV; | 
|  | } | 
|  |  | 
|  | /* Set serial->private if not returning -ENODEV */ | 
|  | if (retval != -ENODEV) | 
|  | usb_set_serial_data(serial, data); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static void qc_release(struct usb_serial *serial) | 
|  | { | 
|  | struct usb_wwan_intf_private *priv = usb_get_serial_data(serial); | 
|  |  | 
|  | dbg("%s", __func__); | 
|  |  | 
|  | /* Call usb_wwan release & free the private data allocated in qcprobe */ | 
|  | usb_wwan_release(serial); | 
|  | usb_set_serial_data(serial, NULL); | 
|  | kfree(priv); | 
|  | } | 
|  |  | 
|  | static struct usb_serial_driver qcdevice = { | 
|  | .driver = { | 
|  | .owner     = THIS_MODULE, | 
|  | .name      = "qcserial", | 
|  | }, | 
|  | .description         = "Qualcomm USB modem", | 
|  | .id_table            = id_table, | 
|  | .usb_driver          = &qcdriver, | 
|  | .num_ports           = 1, | 
|  | .probe               = qcprobe, | 
|  | .open		     = usb_wwan_open, | 
|  | .close		     = usb_wwan_close, | 
|  | .write		     = usb_wwan_write, | 
|  | .write_room	     = usb_wwan_write_room, | 
|  | .chars_in_buffer     = usb_wwan_chars_in_buffer, | 
|  | .attach		     = usb_wwan_startup, | 
|  | .disconnect	     = usb_wwan_disconnect, | 
|  | .release	     = qc_release, | 
|  | #ifdef CONFIG_PM | 
|  | .suspend	     = usb_wwan_suspend, | 
|  | .resume		     = usb_wwan_resume, | 
|  | #endif | 
|  | }; | 
|  |  | 
|  | static int __init qcinit(void) | 
|  | { | 
|  | int retval; | 
|  |  | 
|  | retval = usb_serial_register(&qcdevice); | 
|  | if (retval) | 
|  | return retval; | 
|  |  | 
|  | retval = usb_register(&qcdriver); | 
|  | if (retval) { | 
|  | usb_serial_deregister(&qcdevice); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void __exit qcexit(void) | 
|  | { | 
|  | usb_deregister(&qcdriver); | 
|  | usb_serial_deregister(&qcdevice); | 
|  | } | 
|  |  | 
|  | module_init(qcinit); | 
|  | module_exit(qcexit); | 
|  |  | 
|  | MODULE_AUTHOR(DRIVER_AUTHOR); | 
|  | MODULE_DESCRIPTION(DRIVER_DESC); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  |  | 
|  | module_param(debug, bool, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC(debug, "Debug enabled or not"); |