|  | /* | 
|  | * arch/arm/mach-shmobile/board-ag5evm.c | 
|  | * | 
|  | * Copyright (C) 2010  Takashi Yoshii <[email protected]> | 
|  | * Copyright (C) 2009  Yoshihiro Shimoda <[email protected]> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; version 2 of the License. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/pinctrl/machine.h> | 
|  | #include <linux/pinctrl/pinconf-generic.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/io.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/regulator/fixed.h> | 
|  | #include <linux/regulator/machine.h> | 
|  | #include <linux/serial_sci.h> | 
|  | #include <linux/smsc911x.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/videodev2.h> | 
|  | #include <linux/input.h> | 
|  | #include <linux/input/sh_keysc.h> | 
|  | #include <linux/mmc/host.h> | 
|  | #include <linux/mmc/sh_mmcif.h> | 
|  | #include <linux/mmc/sh_mobile_sdhi.h> | 
|  | #include <linux/mfd/tmio.h> | 
|  | #include <linux/sh_clk.h> | 
|  | #include <linux/irqchip/arm-gic.h> | 
|  | #include <video/sh_mobile_lcdc.h> | 
|  | #include <video/sh_mipi_dsi.h> | 
|  | #include <sound/sh_fsi.h> | 
|  | #include <mach/hardware.h> | 
|  | #include <mach/irqs.h> | 
|  | #include <mach/sh73a0.h> | 
|  | #include <mach/common.h> | 
|  | #include <asm/mach-types.h> | 
|  | #include <asm/mach/arch.h> | 
|  | #include <asm/hardware/cache-l2x0.h> | 
|  | #include <asm/traps.h> | 
|  |  | 
|  | /* Dummy supplies, where voltage doesn't matter */ | 
|  | static struct regulator_consumer_supply dummy_supplies[] = { | 
|  | REGULATOR_SUPPLY("vddvario", "smsc911x"), | 
|  | REGULATOR_SUPPLY("vdd33a", "smsc911x"), | 
|  | }; | 
|  |  | 
|  | static struct resource smsc9220_resources[] = { | 
|  | [0] = { | 
|  | .start		= 0x14000000, | 
|  | .end		= 0x14000000 + SZ_64K - 1, | 
|  | .flags		= IORESOURCE_MEM, | 
|  | }, | 
|  | [1] = { | 
|  | .start		= SH73A0_PINT0_IRQ(2), /* PINTA2 */ | 
|  | .flags		= IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct smsc911x_platform_config smsc9220_platdata = { | 
|  | .flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, | 
|  | .phy_interface	= PHY_INTERFACE_MODE_MII, | 
|  | .irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW, | 
|  | .irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL, | 
|  | }; | 
|  |  | 
|  | static struct platform_device eth_device = { | 
|  | .name		= "smsc911x", | 
|  | .id		= 0, | 
|  | .dev  = { | 
|  | .platform_data = &smsc9220_platdata, | 
|  | }, | 
|  | .resource	= smsc9220_resources, | 
|  | .num_resources	= ARRAY_SIZE(smsc9220_resources), | 
|  | }; | 
|  |  | 
|  | static struct sh_keysc_info keysc_platdata = { | 
|  | .mode		= SH_KEYSC_MODE_6, | 
|  | .scan_timing	= 3, | 
|  | .delay		= 100, | 
|  | .keycodes	= { | 
|  | KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G, | 
|  | KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N, | 
|  | KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U, | 
|  | KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP, | 
|  | KEY_SPACE, KEY_9, KEY_6, KEY_3, KEY_WAKEUP, KEY_RIGHT, \ | 
|  | KEY_COFFEE, | 
|  | KEY_0, KEY_8, KEY_5, KEY_2, KEY_DOWN, KEY_ENTER, KEY_UP, | 
|  | KEY_KPASTERISK, KEY_7, KEY_4, KEY_1, KEY_STOP, KEY_LEFT, \ | 
|  | KEY_COMPUTER, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct resource keysc_resources[] = { | 
|  | [0] = { | 
|  | .name	= "KEYSC", | 
|  | .start	= 0xe61b0000, | 
|  | .end	= 0xe61b0098 - 1, | 
|  | .flags	= IORESOURCE_MEM, | 
|  | }, | 
|  | [1] = { | 
|  | .start	= gic_spi(71), | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device keysc_device = { | 
|  | .name		= "sh_keysc", | 
|  | .id		= 0, | 
|  | .num_resources	= ARRAY_SIZE(keysc_resources), | 
|  | .resource	= keysc_resources, | 
|  | .dev		= { | 
|  | .platform_data	= &keysc_platdata, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* FSI A */ | 
|  | static struct resource fsi_resources[] = { | 
|  | [0] = { | 
|  | .name	= "FSI", | 
|  | .start	= 0xEC230000, | 
|  | .end	= 0xEC230400 - 1, | 
|  | .flags	= IORESOURCE_MEM, | 
|  | }, | 
|  | [1] = { | 
|  | .start  = gic_spi(146), | 
|  | .flags  = IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device fsi_device = { | 
|  | .name		= "sh_fsi2", | 
|  | .id		= -1, | 
|  | .num_resources	= ARRAY_SIZE(fsi_resources), | 
|  | .resource	= fsi_resources, | 
|  | }; | 
|  |  | 
|  | /* Fixed 1.8V regulator to be used by MMCIF */ | 
|  | static struct regulator_consumer_supply fixed1v8_power_consumers[] = | 
|  | { | 
|  | REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"), | 
|  | REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"), | 
|  | }; | 
|  |  | 
|  | static struct resource sh_mmcif_resources[] = { | 
|  | [0] = { | 
|  | .name	= "MMCIF", | 
|  | .start	= 0xe6bd0000, | 
|  | .end	= 0xe6bd00ff, | 
|  | .flags	= IORESOURCE_MEM, | 
|  | }, | 
|  | [1] = { | 
|  | .start	= gic_spi(141), | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | }, | 
|  | [2] = { | 
|  | .start	= gic_spi(140), | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct sh_mmcif_plat_data sh_mmcif_platdata = { | 
|  | .sup_pclk	= 0, | 
|  | .ocr		= MMC_VDD_165_195, | 
|  | .caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, | 
|  | .slave_id_tx	= SHDMA_SLAVE_MMCIF_TX, | 
|  | .slave_id_rx	= SHDMA_SLAVE_MMCIF_RX, | 
|  | }; | 
|  |  | 
|  | static struct platform_device mmc_device = { | 
|  | .name		= "sh_mmcif", | 
|  | .id		= 0, | 
|  | .dev		= { | 
|  | .dma_mask		= NULL, | 
|  | .coherent_dma_mask	= 0xffffffff, | 
|  | .platform_data		= &sh_mmcif_platdata, | 
|  | }, | 
|  | .num_resources	= ARRAY_SIZE(sh_mmcif_resources), | 
|  | .resource	= sh_mmcif_resources, | 
|  | }; | 
|  |  | 
|  | /* IrDA */ | 
|  | static struct resource irda_resources[] = { | 
|  | [0] = { | 
|  | .start	= 0xE6D00000, | 
|  | .end	= 0xE6D01FD4 - 1, | 
|  | .flags  = IORESOURCE_MEM, | 
|  | }, | 
|  | [1] = { | 
|  | .start	= gic_spi(95), | 
|  | .flags  = IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device irda_device = { | 
|  | .name           = "sh_irda", | 
|  | .id		= 0, | 
|  | .resource       = irda_resources, | 
|  | .num_resources  = ARRAY_SIZE(irda_resources), | 
|  | }; | 
|  |  | 
|  | /* MIPI-DSI */ | 
|  | static struct resource mipidsi0_resources[] = { | 
|  | [0] = { | 
|  | .name	= "DSI0", | 
|  | .start  = 0xfeab0000, | 
|  | .end    = 0xfeab3fff, | 
|  | .flags  = IORESOURCE_MEM, | 
|  | }, | 
|  | [1] = { | 
|  | .name	= "DSI0", | 
|  | .start  = 0xfeab4000, | 
|  | .end    = 0xfeab7fff, | 
|  | .flags  = IORESOURCE_MEM, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int sh_mipi_set_dot_clock(struct platform_device *pdev, | 
|  | void __iomem *base, | 
|  | int enable) | 
|  | { | 
|  | struct clk *pck, *phy; | 
|  | int ret; | 
|  |  | 
|  | pck = clk_get(&pdev->dev, "dsip_clk"); | 
|  | if (IS_ERR(pck)) { | 
|  | ret = PTR_ERR(pck); | 
|  | goto sh_mipi_set_dot_clock_pck_err; | 
|  | } | 
|  |  | 
|  | phy = clk_get(&pdev->dev, "dsiphy_clk"); | 
|  | if (IS_ERR(phy)) { | 
|  | ret = PTR_ERR(phy); | 
|  | goto sh_mipi_set_dot_clock_phy_err; | 
|  | } | 
|  |  | 
|  | if (enable) { | 
|  | clk_set_rate(pck, clk_round_rate(pck,  24000000)); | 
|  | clk_set_rate(phy, clk_round_rate(pck, 510000000)); | 
|  | clk_enable(pck); | 
|  | clk_enable(phy); | 
|  | } else { | 
|  | clk_disable(pck); | 
|  | clk_disable(phy); | 
|  | } | 
|  |  | 
|  | ret = 0; | 
|  |  | 
|  | clk_put(phy); | 
|  | sh_mipi_set_dot_clock_phy_err: | 
|  | clk_put(pck); | 
|  | sh_mipi_set_dot_clock_pck_err: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct sh_mipi_dsi_info mipidsi0_info = { | 
|  | .data_format	= MIPI_RGB888, | 
|  | .channel	= LCDC_CHAN_MAINLCD, | 
|  | .lane		= 2, | 
|  | .vsynw_offset	= 20, | 
|  | .clksrc		= 1, | 
|  | .flags		= SH_MIPI_DSI_HSABM		| | 
|  | SH_MIPI_DSI_SYNC_PULSES_MODE	| | 
|  | SH_MIPI_DSI_HSbyteCLK, | 
|  | .set_dot_clock	= sh_mipi_set_dot_clock, | 
|  | }; | 
|  |  | 
|  | static struct platform_device mipidsi0_device = { | 
|  | .name           = "sh-mipi-dsi", | 
|  | .num_resources  = ARRAY_SIZE(mipidsi0_resources), | 
|  | .resource       = mipidsi0_resources, | 
|  | .id             = 0, | 
|  | .dev	= { | 
|  | .platform_data	= &mipidsi0_info, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static unsigned char lcd_backlight_seq[3][2] = { | 
|  | { 0x04, 0x07 }, | 
|  | { 0x23, 0x80 }, | 
|  | { 0x03, 0x01 }, | 
|  | }; | 
|  |  | 
|  | static int lcd_backlight_set_brightness(int brightness) | 
|  | { | 
|  | struct i2c_adapter *adap; | 
|  | struct i2c_msg msg; | 
|  | unsigned int i; | 
|  | int ret; | 
|  |  | 
|  | if (brightness == 0) { | 
|  | /* Reset the chip */ | 
|  | gpio_set_value(235, 0); | 
|  | mdelay(24); | 
|  | gpio_set_value(235, 1); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | adap = i2c_get_adapter(1); | 
|  | if (adap == NULL) | 
|  | return -ENODEV; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(lcd_backlight_seq); i++) { | 
|  | msg.addr = 0x6d; | 
|  | msg.buf = &lcd_backlight_seq[i][0]; | 
|  | msg.len = 2; | 
|  | msg.flags = 0; | 
|  |  | 
|  | ret = i2c_transfer(adap, &msg, 1); | 
|  | if (ret < 0) | 
|  | break; | 
|  | } | 
|  |  | 
|  | i2c_put_adapter(adap); | 
|  | return ret < 0 ? ret : 0; | 
|  | } | 
|  |  | 
|  | /* LCDC0 */ | 
|  | static const struct fb_videomode lcdc0_modes[] = { | 
|  | { | 
|  | .name		= "R63302(QHD)", | 
|  | .xres		= 544, | 
|  | .yres		= 961, | 
|  | .left_margin	= 72, | 
|  | .right_margin	= 600, | 
|  | .hsync_len	= 16, | 
|  | .upper_margin	= 8, | 
|  | .lower_margin	= 8, | 
|  | .vsync_len	= 2, | 
|  | .sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct sh_mobile_lcdc_info lcdc0_info = { | 
|  | .clock_source = LCDC_CLK_PERIPHERAL, | 
|  | .ch[0] = { | 
|  | .chan = LCDC_CHAN_MAINLCD, | 
|  | .interface_type = RGB24, | 
|  | .clock_divider = 1, | 
|  | .flags = LCDC_FLAGS_DWPOL, | 
|  | .fourcc = V4L2_PIX_FMT_RGB565, | 
|  | .lcd_modes = lcdc0_modes, | 
|  | .num_modes = ARRAY_SIZE(lcdc0_modes), | 
|  | .panel_cfg = { | 
|  | .width = 44, | 
|  | .height = 79, | 
|  | }, | 
|  | .bl_info = { | 
|  | .name = "sh_mobile_lcdc_bl", | 
|  | .max_brightness = 1, | 
|  | .set_brightness = lcd_backlight_set_brightness, | 
|  | }, | 
|  | .tx_dev = &mipidsi0_device, | 
|  | } | 
|  | }; | 
|  |  | 
|  | static struct resource lcdc0_resources[] = { | 
|  | [0] = { | 
|  | .name	= "LCDC0", | 
|  | .start	= 0xfe940000, /* P4-only space */ | 
|  | .end	= 0xfe943fff, | 
|  | .flags	= IORESOURCE_MEM, | 
|  | }, | 
|  | [1] = { | 
|  | .start	= intcs_evt2irq(0x580), | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device lcdc0_device = { | 
|  | .name		= "sh_mobile_lcdc_fb", | 
|  | .num_resources	= ARRAY_SIZE(lcdc0_resources), | 
|  | .resource	= lcdc0_resources, | 
|  | .id             = 0, | 
|  | .dev	= { | 
|  | .platform_data	= &lcdc0_info, | 
|  | .coherent_dma_mask = ~0, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* Fixed 2.8V regulators to be used by SDHI0 */ | 
|  | static struct regulator_consumer_supply fixed2v8_power_consumers[] = | 
|  | { | 
|  | REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"), | 
|  | REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"), | 
|  | }; | 
|  |  | 
|  | /* SDHI0 */ | 
|  | static struct sh_mobile_sdhi_info sdhi0_info = { | 
|  | .dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX, | 
|  | .dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX, | 
|  | .tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD, | 
|  | .tmio_caps	= MMC_CAP_SD_HIGHSPEED, | 
|  | .tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29, | 
|  | .cd_gpio	= 251, | 
|  | }; | 
|  |  | 
|  | static struct resource sdhi0_resources[] = { | 
|  | [0] = { | 
|  | .name	= "SDHI0", | 
|  | .start	= 0xee100000, | 
|  | .end	= 0xee1000ff, | 
|  | .flags	= IORESOURCE_MEM, | 
|  | }, | 
|  | [1] = { | 
|  | .name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT, | 
|  | .start	= gic_spi(83), | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | }, | 
|  | [2] = { | 
|  | .name	= SH_MOBILE_SDHI_IRQ_SDCARD, | 
|  | .start	= gic_spi(84), | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | }, | 
|  | [3] = { | 
|  | .name	= SH_MOBILE_SDHI_IRQ_SDIO, | 
|  | .start	= gic_spi(85), | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device sdhi0_device = { | 
|  | .name		= "sh_mobile_sdhi", | 
|  | .id		= 0, | 
|  | .num_resources	= ARRAY_SIZE(sdhi0_resources), | 
|  | .resource	= sdhi0_resources, | 
|  | .dev	= { | 
|  | .platform_data	= &sdhi0_info, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | /* Fixed 3.3V regulator to be used by SDHI1 */ | 
|  | static struct regulator_consumer_supply cn4_power_consumers[] = | 
|  | { | 
|  | REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"), | 
|  | REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"), | 
|  | }; | 
|  |  | 
|  | static struct regulator_init_data cn4_power_init_data = { | 
|  | .constraints = { | 
|  | .valid_ops_mask = REGULATOR_CHANGE_STATUS, | 
|  | }, | 
|  | .num_consumer_supplies  = ARRAY_SIZE(cn4_power_consumers), | 
|  | .consumer_supplies      = cn4_power_consumers, | 
|  | }; | 
|  |  | 
|  | static struct fixed_voltage_config cn4_power_info = { | 
|  | .supply_name = "CN4 SD/MMC Vdd", | 
|  | .microvolts = 3300000, | 
|  | .gpio = 114, | 
|  | .enable_high = 1, | 
|  | .init_data = &cn4_power_init_data, | 
|  | }; | 
|  |  | 
|  | static struct platform_device cn4_power = { | 
|  | .name = "reg-fixed-voltage", | 
|  | .id   = 2, | 
|  | .dev  = { | 
|  | .platform_data = &cn4_power_info, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) | 
|  | { | 
|  | static int power_gpio = -EINVAL; | 
|  |  | 
|  | if (power_gpio < 0) { | 
|  | int ret = gpio_request_one(114, GPIOF_OUT_INIT_LOW, | 
|  | "sdhi1_power"); | 
|  | if (!ret) | 
|  | power_gpio = 114; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If requesting the GPIO above failed, it means, that the regulator got | 
|  | * probed and grabbed the GPIO, but we don't know, whether the sdhi | 
|  | * driver already uses the regulator. If it doesn't, we have to toggle | 
|  | * the GPIO ourselves, even though it is now owned by the fixed | 
|  | * regulator driver. We have to live with the race in case the driver | 
|  | * gets unloaded and the GPIO freed between these two steps. | 
|  | */ | 
|  | gpio_set_value(114, state); | 
|  | } | 
|  |  | 
|  | static struct sh_mobile_sdhi_info sh_sdhi1_info = { | 
|  | .tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, | 
|  | .tmio_caps	= MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, | 
|  | .tmio_ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34, | 
|  | .set_pwr	= ag5evm_sdhi1_set_pwr, | 
|  | }; | 
|  |  | 
|  | static struct resource sdhi1_resources[] = { | 
|  | [0] = { | 
|  | .name	= "SDHI1", | 
|  | .start	= 0xee120000, | 
|  | .end	= 0xee1200ff, | 
|  | .flags	= IORESOURCE_MEM, | 
|  | }, | 
|  | [1] = { | 
|  | .name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT, | 
|  | .start	= gic_spi(87), | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | }, | 
|  | [2] = { | 
|  | .name	= SH_MOBILE_SDHI_IRQ_SDCARD, | 
|  | .start	= gic_spi(88), | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | }, | 
|  | [3] = { | 
|  | .name	= SH_MOBILE_SDHI_IRQ_SDIO, | 
|  | .start	= gic_spi(89), | 
|  | .flags	= IORESOURCE_IRQ, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static struct platform_device sdhi1_device = { | 
|  | .name		= "sh_mobile_sdhi", | 
|  | .id		= 1, | 
|  | .dev		= { | 
|  | .platform_data	= &sh_sdhi1_info, | 
|  | }, | 
|  | .num_resources	= ARRAY_SIZE(sdhi1_resources), | 
|  | .resource	= sdhi1_resources, | 
|  | }; | 
|  |  | 
|  | static struct platform_device *ag5evm_devices[] __initdata = { | 
|  | &cn4_power, | 
|  | ð_device, | 
|  | &keysc_device, | 
|  | &fsi_device, | 
|  | &mmc_device, | 
|  | &irda_device, | 
|  | &mipidsi0_device, | 
|  | &lcdc0_device, | 
|  | &sdhi0_device, | 
|  | &sdhi1_device, | 
|  | }; | 
|  |  | 
|  | static unsigned long pin_pullup_conf[] = { | 
|  | PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0), | 
|  | }; | 
|  |  | 
|  | static const struct pinctrl_map ag5evm_pinctrl_map[] = { | 
|  | /* FSIA */ | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", | 
|  | "fsia_mclk_in", "fsia"), | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", | 
|  | "fsia_sclk_in", "fsia"), | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", | 
|  | "fsia_data_in", "fsia"), | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0", | 
|  | "fsia_data_out", "fsia"), | 
|  | /* I2C2 & I2C3 */ | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.2", "pfc-sh73a0", | 
|  | "i2c2_0", "i2c2"), | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0", | 
|  | "i2c3_0", "i2c3"), | 
|  | /* IrDA */ | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_irda.0", "pfc-sh73a0", | 
|  | "irda_0", "irda"), | 
|  | /* KEYSC */ | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", | 
|  | "keysc_in8", "keysc"), | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", | 
|  | "keysc_out04", "keysc"), | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", | 
|  | "keysc_out5", "keysc"), | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", | 
|  | "keysc_out6_0", "keysc"), | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", | 
|  | "keysc_out7_0", "keysc"), | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", | 
|  | "keysc_out8_0", "keysc"), | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", | 
|  | "keysc_out9_2", "keysc"), | 
|  | PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0", | 
|  | "keysc_in8", pin_pullup_conf), | 
|  | /* MMCIF */ | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", | 
|  | "mmc0_data8_0", "mmc0"), | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", | 
|  | "mmc0_ctrl_0", "mmc0"), | 
|  | PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0", | 
|  | "PORT279", pin_pullup_conf), | 
|  | PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0", | 
|  | "mmc0_data8_0", pin_pullup_conf), | 
|  | /* SCIFA2 */ | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0", | 
|  | "scifa2_data_0", "scifa2"), | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0", | 
|  | "scifa2_ctrl_0", "scifa2"), | 
|  | /* SDHI0 (CN15 [SD I/F]) */ | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", | 
|  | "sdhi0_data4", "sdhi0"), | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", | 
|  | "sdhi0_ctrl", "sdhi0"), | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0", | 
|  | "sdhi0_wp", "sdhi0"), | 
|  | /* SDHI1 (CN4 [WLAN I/F]) */ | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", | 
|  | "sdhi1_data4", "sdhi1"), | 
|  | PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", | 
|  | "sdhi1_ctrl", "sdhi1"), | 
|  | PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", | 
|  | "sdhi1_data4", pin_pullup_conf), | 
|  | PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0", | 
|  | "PORT263", pin_pullup_conf), | 
|  | }; | 
|  |  | 
|  | static void __init ag5evm_init(void) | 
|  | { | 
|  | regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers, | 
|  | ARRAY_SIZE(fixed1v8_power_consumers), 1800000); | 
|  | regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers, | 
|  | ARRAY_SIZE(fixed2v8_power_consumers), 3300000); | 
|  | regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies)); | 
|  |  | 
|  | pinctrl_register_mappings(ag5evm_pinctrl_map, | 
|  | ARRAY_SIZE(ag5evm_pinctrl_map)); | 
|  | sh73a0_pinmux_init(); | 
|  |  | 
|  | /* enable MMCIF */ | 
|  | gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */ | 
|  |  | 
|  | /* enable SMSC911X */ | 
|  | gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */ | 
|  | gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */ | 
|  |  | 
|  | /* LCD panel */ | 
|  | gpio_request_one(217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */ | 
|  | mdelay(1); | 
|  | gpio_set_value(217, 1); | 
|  | mdelay(100); | 
|  |  | 
|  | /* LCD backlight controller */ | 
|  | gpio_request_one(235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */ | 
|  | lcd_backlight_set_brightness(0); | 
|  |  | 
|  | #ifdef CONFIG_CACHE_L2X0 | 
|  | /* Shared attribute override enable, 64K*8way */ | 
|  | l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff); | 
|  | #endif | 
|  | sh73a0_add_standard_devices(); | 
|  | platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices)); | 
|  | } | 
|  |  | 
|  | MACHINE_START(AG5EVM, "ag5evm") | 
|  | .smp		= smp_ops(sh73a0_smp_ops), | 
|  | .map_io		= sh73a0_map_io, | 
|  | .init_early	= sh73a0_add_early_devices, | 
|  | .nr_irqs	= NR_IRQS_LEGACY, | 
|  | .init_irq	= sh73a0_init_irq, | 
|  | .init_machine	= ag5evm_init, | 
|  | .init_late	= shmobile_init_late, | 
|  | .init_time	= sh73a0_earlytimer_init, | 
|  | MACHINE_END |