|  | /* | 
|  | * max8997_charger.c - Power supply consumer driver for the Maxim 8997/8966 | 
|  | * | 
|  | *  Copyright (C) 2011 Samsung Electronics | 
|  | *  MyungJoo Ham <[email protected]> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
|  | */ | 
|  |  | 
|  | #include <linux/err.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/power_supply.h> | 
|  | #include <linux/mfd/max8997.h> | 
|  | #include <linux/mfd/max8997-private.h> | 
|  |  | 
|  | struct charger_data { | 
|  | struct device *dev; | 
|  | struct max8997_dev *iodev; | 
|  | struct power_supply *battery; | 
|  | }; | 
|  |  | 
|  | static enum power_supply_property max8997_battery_props[] = { | 
|  | POWER_SUPPLY_PROP_STATUS, /* "FULL" or "NOT FULL" only. */ | 
|  | POWER_SUPPLY_PROP_PRESENT, /* the presence of battery */ | 
|  | POWER_SUPPLY_PROP_ONLINE, /* charger is active or not */ | 
|  | }; | 
|  |  | 
|  | /* Note that the charger control is done by a current regulator "CHARGER" */ | 
|  | static int max8997_battery_get_property(struct power_supply *psy, | 
|  | enum power_supply_property psp, | 
|  | union power_supply_propval *val) | 
|  | { | 
|  | struct charger_data *charger = power_supply_get_drvdata(psy); | 
|  | struct i2c_client *i2c = charger->iodev->i2c; | 
|  | int ret; | 
|  | u8 reg; | 
|  |  | 
|  | switch (psp) { | 
|  | case POWER_SUPPLY_PROP_STATUS: | 
|  | val->intval = 0; | 
|  | ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, ®); | 
|  | if (ret) | 
|  | return ret; | 
|  | if ((reg & (1 << 0)) == 0x1) | 
|  | val->intval = POWER_SUPPLY_STATUS_FULL; | 
|  |  | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_PRESENT: | 
|  | val->intval = 0; | 
|  | ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, ®); | 
|  | if (ret) | 
|  | return ret; | 
|  | if ((reg & (1 << 2)) == 0x0) | 
|  | val->intval = 1; | 
|  |  | 
|  | break; | 
|  | case POWER_SUPPLY_PROP_ONLINE: | 
|  | val->intval = 0; | 
|  | ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, ®); | 
|  | if (ret) | 
|  | return ret; | 
|  | /* DCINOK */ | 
|  | if (reg & (1 << 1)) | 
|  | val->intval = 1; | 
|  |  | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct power_supply_desc max8997_battery_desc = { | 
|  | .name		= "max8997_pmic", | 
|  | .type		= POWER_SUPPLY_TYPE_BATTERY, | 
|  | .get_property	= max8997_battery_get_property, | 
|  | .properties	= max8997_battery_props, | 
|  | .num_properties	= ARRAY_SIZE(max8997_battery_props), | 
|  | }; | 
|  |  | 
|  | static int max8997_battery_probe(struct platform_device *pdev) | 
|  | { | 
|  | int ret = 0; | 
|  | struct charger_data *charger; | 
|  | struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent); | 
|  | struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev); | 
|  | struct power_supply_config psy_cfg = {}; | 
|  |  | 
|  | if (!pdata) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (pdata->eoc_mA) { | 
|  | int val = (pdata->eoc_mA - 50) / 10; | 
|  | if (val < 0) | 
|  | val = 0; | 
|  | if (val > 0xf) | 
|  | val = 0xf; | 
|  |  | 
|  | ret = max8997_update_reg(iodev->i2c, | 
|  | MAX8997_REG_MBCCTRL5, val, 0xf); | 
|  | if (ret < 0) { | 
|  | dev_err(&pdev->dev, "Cannot use i2c bus.\n"); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  |  | 
|  | switch (pdata->timeout) { | 
|  | case 5: | 
|  | ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1, | 
|  | 0x2 << 4, 0x7 << 4); | 
|  | break; | 
|  | case 6: | 
|  | ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1, | 
|  | 0x3 << 4, 0x7 << 4); | 
|  | break; | 
|  | case 7: | 
|  | ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1, | 
|  | 0x4 << 4, 0x7 << 4); | 
|  | break; | 
|  | case 0: | 
|  | ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1, | 
|  | 0x7 << 4, 0x7 << 4); | 
|  | break; | 
|  | default: | 
|  | dev_err(&pdev->dev, "incorrect timeout value (%d)\n", | 
|  | pdata->timeout); | 
|  | return -EINVAL; | 
|  | } | 
|  | if (ret < 0) { | 
|  | dev_err(&pdev->dev, "Cannot use i2c bus.\n"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | charger = devm_kzalloc(&pdev->dev, sizeof(struct charger_data), | 
|  | GFP_KERNEL); | 
|  | if (charger == NULL) { | 
|  | dev_err(&pdev->dev, "Cannot allocate memory.\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | platform_set_drvdata(pdev, charger); | 
|  |  | 
|  |  | 
|  | charger->dev = &pdev->dev; | 
|  | charger->iodev = iodev; | 
|  |  | 
|  | psy_cfg.drv_data = charger; | 
|  |  | 
|  | charger->battery = power_supply_register(&pdev->dev, | 
|  | &max8997_battery_desc, | 
|  | &psy_cfg); | 
|  | if (IS_ERR(charger->battery)) { | 
|  | dev_err(&pdev->dev, "failed: power supply register\n"); | 
|  | return PTR_ERR(charger->battery); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int max8997_battery_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct charger_data *charger = platform_get_drvdata(pdev); | 
|  |  | 
|  | power_supply_unregister(charger->battery); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct platform_device_id max8997_battery_id[] = { | 
|  | { "max8997-battery", 0 }, | 
|  | { } | 
|  | }; | 
|  |  | 
|  | static struct platform_driver max8997_battery_driver = { | 
|  | .driver = { | 
|  | .name = "max8997-battery", | 
|  | }, | 
|  | .probe = max8997_battery_probe, | 
|  | .remove = max8997_battery_remove, | 
|  | .id_table = max8997_battery_id, | 
|  | }; | 
|  |  | 
|  | static int __init max8997_battery_init(void) | 
|  | { | 
|  | return platform_driver_register(&max8997_battery_driver); | 
|  | } | 
|  | subsys_initcall(max8997_battery_init); | 
|  |  | 
|  | static void __exit max8997_battery_cleanup(void) | 
|  | { | 
|  | platform_driver_unregister(&max8997_battery_driver); | 
|  | } | 
|  | module_exit(max8997_battery_cleanup); | 
|  |  | 
|  | MODULE_DESCRIPTION("MAXIM 8997/8966 battery control driver"); | 
|  | MODULE_AUTHOR("MyungJoo Ham <[email protected]>"); | 
|  | MODULE_LICENSE("GPL"); |