|  | // SPDX-License-Identifier: GPL-2.0-or-later | 
|  | /* | 
|  | * gl520sm.c - Part of lm_sensors, Linux kernel modules for hardware | 
|  | *	       monitoring | 
|  | * Copyright (c) 1998, 1999  Frodo Looijaard <[email protected]>, | 
|  | *			     Kyösti Mälkki <[email protected]> | 
|  | * Copyright (c) 2005	Maarten Deprez <[email protected]> | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/jiffies.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/hwmon.h> | 
|  | #include <linux/hwmon-sysfs.h> | 
|  | #include <linux/hwmon-vid.h> | 
|  | #include <linux/err.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/sysfs.h> | 
|  |  | 
|  | /* Type of the extra sensor */ | 
|  | static unsigned short extra_sensor_type; | 
|  | module_param(extra_sensor_type, ushort, 0); | 
|  | MODULE_PARM_DESC(extra_sensor_type, "Type of extra sensor (0=autodetect, 1=temperature, 2=voltage)"); | 
|  |  | 
|  | /* Addresses to scan */ | 
|  | static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END }; | 
|  |  | 
|  | /* | 
|  | * Many GL520 constants specified below | 
|  | * One of the inputs can be configured as either temp or voltage. | 
|  | * That's why _TEMP2 and _IN4 access the same register | 
|  | */ | 
|  |  | 
|  | /* The GL520 registers */ | 
|  | #define GL520_REG_CHIP_ID		0x00 | 
|  | #define GL520_REG_REVISION		0x01 | 
|  | #define GL520_REG_CONF			0x03 | 
|  | #define GL520_REG_MASK			0x11 | 
|  |  | 
|  | #define GL520_REG_VID_INPUT		0x02 | 
|  |  | 
|  | static const u8 GL520_REG_IN_INPUT[]	= { 0x15, 0x14, 0x13, 0x0d, 0x0e }; | 
|  | static const u8 GL520_REG_IN_LIMIT[]	= { 0x0c, 0x09, 0x0a, 0x0b }; | 
|  | static const u8 GL520_REG_IN_MIN[]	= { 0x0c, 0x09, 0x0a, 0x0b, 0x18 }; | 
|  | static const u8 GL520_REG_IN_MAX[]	= { 0x0c, 0x09, 0x0a, 0x0b, 0x17 }; | 
|  |  | 
|  | static const u8 GL520_REG_TEMP_INPUT[]		= { 0x04, 0x0e }; | 
|  | static const u8 GL520_REG_TEMP_MAX[]		= { 0x05, 0x17 }; | 
|  | static const u8 GL520_REG_TEMP_MAX_HYST[]	= { 0x06, 0x18 }; | 
|  |  | 
|  | #define GL520_REG_FAN_INPUT		0x07 | 
|  | #define GL520_REG_FAN_MIN		0x08 | 
|  | #define GL520_REG_FAN_DIV		0x0f | 
|  | #define GL520_REG_FAN_OFF		GL520_REG_FAN_DIV | 
|  |  | 
|  | #define GL520_REG_ALARMS		0x12 | 
|  | #define GL520_REG_BEEP_MASK		0x10 | 
|  | #define GL520_REG_BEEP_ENABLE		GL520_REG_CONF | 
|  |  | 
|  | /* Client data */ | 
|  | struct gl520_data { | 
|  | struct i2c_client *client; | 
|  | const struct attribute_group *groups[3]; | 
|  | struct mutex update_lock; | 
|  | char valid;		/* zero until the following fields are valid */ | 
|  | unsigned long last_updated;	/* in jiffies */ | 
|  |  | 
|  | u8 vid; | 
|  | u8 vrm; | 
|  | u8 in_input[5];		/* [0] = VVD */ | 
|  | u8 in_min[5];		/* [0] = VDD */ | 
|  | u8 in_max[5];		/* [0] = VDD */ | 
|  | u8 fan_input[2]; | 
|  | u8 fan_min[2]; | 
|  | u8 fan_div[2]; | 
|  | u8 fan_off; | 
|  | u8 temp_input[2]; | 
|  | u8 temp_max[2]; | 
|  | u8 temp_max_hyst[2]; | 
|  | u8 alarms; | 
|  | u8 beep_enable; | 
|  | u8 beep_mask; | 
|  | u8 alarm_mask; | 
|  | u8 two_temps; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Registers 0x07 to 0x0c are word-sized, others are byte-sized | 
|  | * GL520 uses a high-byte first convention | 
|  | */ | 
|  | static int gl520_read_value(struct i2c_client *client, u8 reg) | 
|  | { | 
|  | if ((reg >= 0x07) && (reg <= 0x0c)) | 
|  | return i2c_smbus_read_word_swapped(client, reg); | 
|  | else | 
|  | return i2c_smbus_read_byte_data(client, reg); | 
|  | } | 
|  |  | 
|  | static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value) | 
|  | { | 
|  | if ((reg >= 0x07) && (reg <= 0x0c)) | 
|  | return i2c_smbus_write_word_swapped(client, reg, value); | 
|  | else | 
|  | return i2c_smbus_write_byte_data(client, reg, value); | 
|  | } | 
|  |  | 
|  | static struct gl520_data *gl520_update_device(struct device *dev) | 
|  | { | 
|  | struct gl520_data *data = dev_get_drvdata(dev); | 
|  | struct i2c_client *client = data->client; | 
|  | int val, i; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  |  | 
|  | if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { | 
|  |  | 
|  | dev_dbg(&client->dev, "Starting gl520sm update\n"); | 
|  |  | 
|  | data->alarms = gl520_read_value(client, GL520_REG_ALARMS); | 
|  | data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK); | 
|  | data->vid = gl520_read_value(client, | 
|  | GL520_REG_VID_INPUT) & 0x1f; | 
|  |  | 
|  | for (i = 0; i < 4; i++) { | 
|  | data->in_input[i] = gl520_read_value(client, | 
|  | GL520_REG_IN_INPUT[i]); | 
|  | val = gl520_read_value(client, GL520_REG_IN_LIMIT[i]); | 
|  | data->in_min[i] = val & 0xff; | 
|  | data->in_max[i] = (val >> 8) & 0xff; | 
|  | } | 
|  |  | 
|  | val = gl520_read_value(client, GL520_REG_FAN_INPUT); | 
|  | data->fan_input[0] = (val >> 8) & 0xff; | 
|  | data->fan_input[1] = val & 0xff; | 
|  |  | 
|  | val = gl520_read_value(client, GL520_REG_FAN_MIN); | 
|  | data->fan_min[0] = (val >> 8) & 0xff; | 
|  | data->fan_min[1] = val & 0xff; | 
|  |  | 
|  | data->temp_input[0] = gl520_read_value(client, | 
|  | GL520_REG_TEMP_INPUT[0]); | 
|  | data->temp_max[0] = gl520_read_value(client, | 
|  | GL520_REG_TEMP_MAX[0]); | 
|  | data->temp_max_hyst[0] = gl520_read_value(client, | 
|  | GL520_REG_TEMP_MAX_HYST[0]); | 
|  |  | 
|  | val = gl520_read_value(client, GL520_REG_FAN_DIV); | 
|  | data->fan_div[0] = (val >> 6) & 0x03; | 
|  | data->fan_div[1] = (val >> 4) & 0x03; | 
|  | data->fan_off = (val >> 2) & 0x01; | 
|  |  | 
|  | data->alarms &= data->alarm_mask; | 
|  |  | 
|  | val = gl520_read_value(client, GL520_REG_CONF); | 
|  | data->beep_enable = !((val >> 2) & 1); | 
|  |  | 
|  | /* Temp1 and Vin4 are the same input */ | 
|  | if (data->two_temps) { | 
|  | data->temp_input[1] = gl520_read_value(client, | 
|  | GL520_REG_TEMP_INPUT[1]); | 
|  | data->temp_max[1] = gl520_read_value(client, | 
|  | GL520_REG_TEMP_MAX[1]); | 
|  | data->temp_max_hyst[1] = gl520_read_value(client, | 
|  | GL520_REG_TEMP_MAX_HYST[1]); | 
|  | } else { | 
|  | data->in_input[4] = gl520_read_value(client, | 
|  | GL520_REG_IN_INPUT[4]); | 
|  | data->in_min[4] = gl520_read_value(client, | 
|  | GL520_REG_IN_MIN[4]); | 
|  | data->in_max[4] = gl520_read_value(client, | 
|  | GL520_REG_IN_MAX[4]); | 
|  | } | 
|  |  | 
|  | data->last_updated = jiffies; | 
|  | data->valid = 1; | 
|  | } | 
|  |  | 
|  | mutex_unlock(&data->update_lock); | 
|  |  | 
|  | return data; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sysfs stuff | 
|  | */ | 
|  |  | 
|  | static ssize_t cpu0_vid_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct gl520_data *data = gl520_update_device(dev); | 
|  | return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm)); | 
|  | } | 
|  | static DEVICE_ATTR_RO(cpu0_vid); | 
|  |  | 
|  | #define VDD_FROM_REG(val)	DIV_ROUND_CLOSEST((val) * 95, 4) | 
|  | #define VDD_CLAMP(val)		clamp_val(val, 0, 255 * 95 / 4) | 
|  | #define VDD_TO_REG(val)		DIV_ROUND_CLOSEST(VDD_CLAMP(val) * 4, 95) | 
|  |  | 
|  | #define IN_FROM_REG(val)	((val) * 19) | 
|  | #define IN_CLAMP(val)		clamp_val(val, 0, 255 * 19) | 
|  | #define IN_TO_REG(val)		DIV_ROUND_CLOSEST(IN_CLAMP(val), 19) | 
|  |  | 
|  | static ssize_t in_input_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | int n = to_sensor_dev_attr(attr)->index; | 
|  | struct gl520_data *data = gl520_update_device(dev); | 
|  | u8 r = data->in_input[n]; | 
|  |  | 
|  | if (n == 0) | 
|  | return sprintf(buf, "%d\n", VDD_FROM_REG(r)); | 
|  | else | 
|  | return sprintf(buf, "%d\n", IN_FROM_REG(r)); | 
|  | } | 
|  |  | 
|  | static ssize_t in_min_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | int n = to_sensor_dev_attr(attr)->index; | 
|  | struct gl520_data *data = gl520_update_device(dev); | 
|  | u8 r = data->in_min[n]; | 
|  |  | 
|  | if (n == 0) | 
|  | return sprintf(buf, "%d\n", VDD_FROM_REG(r)); | 
|  | else | 
|  | return sprintf(buf, "%d\n", IN_FROM_REG(r)); | 
|  | } | 
|  |  | 
|  | static ssize_t in_max_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | int n = to_sensor_dev_attr(attr)->index; | 
|  | struct gl520_data *data = gl520_update_device(dev); | 
|  | u8 r = data->in_max[n]; | 
|  |  | 
|  | if (n == 0) | 
|  | return sprintf(buf, "%d\n", VDD_FROM_REG(r)); | 
|  | else | 
|  | return sprintf(buf, "%d\n", IN_FROM_REG(r)); | 
|  | } | 
|  |  | 
|  | static ssize_t in_min_store(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct gl520_data *data = dev_get_drvdata(dev); | 
|  | struct i2c_client *client = data->client; | 
|  | int n = to_sensor_dev_attr(attr)->index; | 
|  | u8 r; | 
|  | long v; | 
|  | int err; | 
|  |  | 
|  | err = kstrtol(buf, 10, &v); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  |  | 
|  | if (n == 0) | 
|  | r = VDD_TO_REG(v); | 
|  | else | 
|  | r = IN_TO_REG(v); | 
|  |  | 
|  | data->in_min[n] = r; | 
|  |  | 
|  | if (n < 4) | 
|  | gl520_write_value(client, GL520_REG_IN_MIN[n], | 
|  | (gl520_read_value(client, GL520_REG_IN_MIN[n]) | 
|  | & ~0xff) | r); | 
|  | else | 
|  | gl520_write_value(client, GL520_REG_IN_MIN[n], r); | 
|  |  | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t in_max_store(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct gl520_data *data = dev_get_drvdata(dev); | 
|  | struct i2c_client *client = data->client; | 
|  | int n = to_sensor_dev_attr(attr)->index; | 
|  | u8 r; | 
|  | long v; | 
|  | int err; | 
|  |  | 
|  | err = kstrtol(buf, 10, &v); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | if (n == 0) | 
|  | r = VDD_TO_REG(v); | 
|  | else | 
|  | r = IN_TO_REG(v); | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  |  | 
|  | data->in_max[n] = r; | 
|  |  | 
|  | if (n < 4) | 
|  | gl520_write_value(client, GL520_REG_IN_MAX[n], | 
|  | (gl520_read_value(client, GL520_REG_IN_MAX[n]) | 
|  | & ~0xff00) | (r << 8)); | 
|  | else | 
|  | gl520_write_value(client, GL520_REG_IN_MAX[n], r); | 
|  |  | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_RO(in0_input, in_input, 0); | 
|  | static SENSOR_DEVICE_ATTR_RO(in1_input, in_input, 1); | 
|  | static SENSOR_DEVICE_ATTR_RO(in2_input, in_input, 2); | 
|  | static SENSOR_DEVICE_ATTR_RO(in3_input, in_input, 3); | 
|  | static SENSOR_DEVICE_ATTR_RO(in4_input, in_input, 4); | 
|  | static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0); | 
|  | static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1); | 
|  | static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2); | 
|  | static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3); | 
|  | static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4); | 
|  | static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0); | 
|  | static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1); | 
|  | static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2); | 
|  | static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3); | 
|  | static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4); | 
|  |  | 
|  | #define DIV_FROM_REG(val) (1 << (val)) | 
|  | #define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (480000 / ((val) << (div)))) | 
|  |  | 
|  | #define FAN_BASE(div)		(480000 >> (div)) | 
|  | #define FAN_CLAMP(val, div)	clamp_val(val, FAN_BASE(div) / 255, \ | 
|  | FAN_BASE(div)) | 
|  | #define FAN_TO_REG(val, div)	((val) == 0 ? 0 : \ | 
|  | DIV_ROUND_CLOSEST(480000, \ | 
|  | FAN_CLAMP(val, div) << (div))) | 
|  |  | 
|  | static ssize_t fan_input_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | int n = to_sensor_dev_attr(attr)->index; | 
|  | struct gl520_data *data = gl520_update_device(dev); | 
|  |  | 
|  | return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_input[n], | 
|  | data->fan_div[n])); | 
|  | } | 
|  |  | 
|  | static ssize_t fan_min_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | int n = to_sensor_dev_attr(attr)->index; | 
|  | struct gl520_data *data = gl520_update_device(dev); | 
|  |  | 
|  | return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[n], | 
|  | data->fan_div[n])); | 
|  | } | 
|  |  | 
|  | static ssize_t fan_div_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | int n = to_sensor_dev_attr(attr)->index; | 
|  | struct gl520_data *data = gl520_update_device(dev); | 
|  |  | 
|  | return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[n])); | 
|  | } | 
|  |  | 
|  | static ssize_t fan1_off_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct gl520_data *data = gl520_update_device(dev); | 
|  | return sprintf(buf, "%d\n", data->fan_off); | 
|  | } | 
|  |  | 
|  | static ssize_t fan_min_store(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, | 
|  | size_t count) | 
|  | { | 
|  | struct gl520_data *data = dev_get_drvdata(dev); | 
|  | struct i2c_client *client = data->client; | 
|  | int n = to_sensor_dev_attr(attr)->index; | 
|  | u8 r; | 
|  | unsigned long v; | 
|  | int err; | 
|  |  | 
|  | err = kstrtoul(buf, 10, &v); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | r = FAN_TO_REG(v, data->fan_div[n]); | 
|  | data->fan_min[n] = r; | 
|  |  | 
|  | if (n == 0) | 
|  | gl520_write_value(client, GL520_REG_FAN_MIN, | 
|  | (gl520_read_value(client, GL520_REG_FAN_MIN) | 
|  | & ~0xff00) | (r << 8)); | 
|  | else | 
|  | gl520_write_value(client, GL520_REG_FAN_MIN, | 
|  | (gl520_read_value(client, GL520_REG_FAN_MIN) | 
|  | & ~0xff) | r); | 
|  |  | 
|  | data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK); | 
|  | if (data->fan_min[n] == 0) | 
|  | data->alarm_mask &= (n == 0) ? ~0x20 : ~0x40; | 
|  | else | 
|  | data->alarm_mask |= (n == 0) ? 0x20 : 0x40; | 
|  | data->beep_mask &= data->alarm_mask; | 
|  | gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask); | 
|  |  | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t fan_div_store(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, | 
|  | size_t count) | 
|  | { | 
|  | struct gl520_data *data = dev_get_drvdata(dev); | 
|  | struct i2c_client *client = data->client; | 
|  | int n = to_sensor_dev_attr(attr)->index; | 
|  | u8 r; | 
|  | unsigned long v; | 
|  | int err; | 
|  |  | 
|  | err = kstrtoul(buf, 10, &v); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | switch (v) { | 
|  | case 1: | 
|  | r = 0; | 
|  | break; | 
|  | case 2: | 
|  | r = 1; | 
|  | break; | 
|  | case 4: | 
|  | r = 2; | 
|  | break; | 
|  | case 8: | 
|  | r = 3; | 
|  | break; | 
|  | default: | 
|  | dev_err(&client->dev, | 
|  | "fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n", v); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->fan_div[n] = r; | 
|  |  | 
|  | if (n == 0) | 
|  | gl520_write_value(client, GL520_REG_FAN_DIV, | 
|  | (gl520_read_value(client, GL520_REG_FAN_DIV) | 
|  | & ~0xc0) | (r << 6)); | 
|  | else | 
|  | gl520_write_value(client, GL520_REG_FAN_DIV, | 
|  | (gl520_read_value(client, GL520_REG_FAN_DIV) | 
|  | & ~0x30) | (r << 4)); | 
|  |  | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t fan1_off_store(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, | 
|  | size_t count) | 
|  | { | 
|  | struct gl520_data *data = dev_get_drvdata(dev); | 
|  | struct i2c_client *client = data->client; | 
|  | u8 r; | 
|  | unsigned long v; | 
|  | int err; | 
|  |  | 
|  | err = kstrtoul(buf, 10, &v); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | r = (v ? 1 : 0); | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->fan_off = r; | 
|  | gl520_write_value(client, GL520_REG_FAN_OFF, | 
|  | (gl520_read_value(client, GL520_REG_FAN_OFF) | 
|  | & ~0x0c) | (r << 2)); | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_RO(fan1_input, fan_input, 0); | 
|  | static SENSOR_DEVICE_ATTR_RO(fan2_input, fan_input, 1); | 
|  | static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0); | 
|  | static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1); | 
|  | static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0); | 
|  | static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1); | 
|  | static DEVICE_ATTR_RW(fan1_off); | 
|  |  | 
|  | #define TEMP_FROM_REG(val)	(((val) - 130) * 1000) | 
|  | #define TEMP_CLAMP(val)		clamp_val(val, -130000, 125000) | 
|  | #define TEMP_TO_REG(val)	(DIV_ROUND_CLOSEST(TEMP_CLAMP(val), 1000) + 130) | 
|  |  | 
|  | static ssize_t temp_input_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | int n = to_sensor_dev_attr(attr)->index; | 
|  | struct gl520_data *data = gl520_update_device(dev); | 
|  |  | 
|  | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_input[n])); | 
|  | } | 
|  |  | 
|  | static ssize_t temp_max_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | int n = to_sensor_dev_attr(attr)->index; | 
|  | struct gl520_data *data = gl520_update_device(dev); | 
|  |  | 
|  | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[n])); | 
|  | } | 
|  |  | 
|  | static ssize_t temp_max_hyst_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | int n = to_sensor_dev_attr(attr)->index; | 
|  | struct gl520_data *data = gl520_update_device(dev); | 
|  |  | 
|  | return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[n])); | 
|  | } | 
|  |  | 
|  | static ssize_t temp_max_store(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, | 
|  | size_t count) | 
|  | { | 
|  | struct gl520_data *data = dev_get_drvdata(dev); | 
|  | struct i2c_client *client = data->client; | 
|  | int n = to_sensor_dev_attr(attr)->index; | 
|  | long v; | 
|  | int err; | 
|  |  | 
|  | err = kstrtol(buf, 10, &v); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->temp_max[n] = TEMP_TO_REG(v); | 
|  | gl520_write_value(client, GL520_REG_TEMP_MAX[n], data->temp_max[n]); | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t temp_max_hyst_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct gl520_data *data = dev_get_drvdata(dev); | 
|  | struct i2c_client *client = data->client; | 
|  | int n = to_sensor_dev_attr(attr)->index; | 
|  | long v; | 
|  | int err; | 
|  |  | 
|  | err = kstrtol(buf, 10, &v); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->temp_max_hyst[n] = TEMP_TO_REG(v); | 
|  | gl520_write_value(client, GL520_REG_TEMP_MAX_HYST[n], | 
|  | data->temp_max_hyst[n]); | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp2_input, temp_input, 1); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, temp_max_hyst, 0); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp2_max_hyst, temp_max_hyst, 1); | 
|  |  | 
|  | static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct gl520_data *data = gl520_update_device(dev); | 
|  | return sprintf(buf, "%d\n", data->alarms); | 
|  | } | 
|  |  | 
|  | static ssize_t beep_enable_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct gl520_data *data = gl520_update_device(dev); | 
|  | return sprintf(buf, "%d\n", data->beep_enable); | 
|  | } | 
|  |  | 
|  | static ssize_t beep_mask_show(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct gl520_data *data = gl520_update_device(dev); | 
|  | return sprintf(buf, "%d\n", data->beep_mask); | 
|  | } | 
|  |  | 
|  | static ssize_t beep_enable_store(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct gl520_data *data = dev_get_drvdata(dev); | 
|  | struct i2c_client *client = data->client; | 
|  | u8 r; | 
|  | unsigned long v; | 
|  | int err; | 
|  |  | 
|  | err = kstrtoul(buf, 10, &v); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | r = (v ? 0 : 1); | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->beep_enable = !r; | 
|  | gl520_write_value(client, GL520_REG_BEEP_ENABLE, | 
|  | (gl520_read_value(client, GL520_REG_BEEP_ENABLE) | 
|  | & ~0x04) | (r << 2)); | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static ssize_t beep_mask_store(struct device *dev, | 
|  | struct device_attribute *attr, const char *buf, | 
|  | size_t count) | 
|  | { | 
|  | struct gl520_data *data = dev_get_drvdata(dev); | 
|  | struct i2c_client *client = data->client; | 
|  | unsigned long r; | 
|  | int err; | 
|  |  | 
|  | err = kstrtoul(buf, 10, &r); | 
|  | if (err) | 
|  | return err; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | r &= data->alarm_mask; | 
|  | data->beep_mask = r; | 
|  | gl520_write_value(client, GL520_REG_BEEP_MASK, r); | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR_RO(alarms); | 
|  | static DEVICE_ATTR_RW(beep_enable); | 
|  | static DEVICE_ATTR_RW(beep_mask); | 
|  |  | 
|  | static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | int bit_nr = to_sensor_dev_attr(attr)->index; | 
|  | struct gl520_data *data = gl520_update_device(dev); | 
|  |  | 
|  | return sprintf(buf, "%d\n", (data->alarms >> bit_nr) & 1); | 
|  | } | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0); | 
|  | static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1); | 
|  | static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2); | 
|  | static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4); | 
|  | static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 5); | 
|  | static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 6); | 
|  | static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 7); | 
|  | static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 7); | 
|  |  | 
|  | static ssize_t beep_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | int bitnr = to_sensor_dev_attr(attr)->index; | 
|  | struct gl520_data *data = gl520_update_device(dev); | 
|  |  | 
|  | return sprintf(buf, "%d\n", (data->beep_mask >> bitnr) & 1); | 
|  | } | 
|  |  | 
|  | static ssize_t beep_store(struct device *dev, struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct gl520_data *data = dev_get_drvdata(dev); | 
|  | struct i2c_client *client = data->client; | 
|  | int bitnr = to_sensor_dev_attr(attr)->index; | 
|  | unsigned long bit; | 
|  |  | 
|  | int err; | 
|  |  | 
|  | err = kstrtoul(buf, 10, &bit); | 
|  | if (err) | 
|  | return err; | 
|  | if (bit & ~1) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&data->update_lock); | 
|  | data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK); | 
|  | if (bit) | 
|  | data->beep_mask |= (1 << bitnr); | 
|  | else | 
|  | data->beep_mask &= ~(1 << bitnr); | 
|  | gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask); | 
|  | mutex_unlock(&data->update_lock); | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static SENSOR_DEVICE_ATTR_RW(in0_beep, beep, 0); | 
|  | static SENSOR_DEVICE_ATTR_RW(in1_beep, beep, 1); | 
|  | static SENSOR_DEVICE_ATTR_RW(in2_beep, beep, 2); | 
|  | static SENSOR_DEVICE_ATTR_RW(in3_beep, beep, 3); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp1_beep, beep, 4); | 
|  | static SENSOR_DEVICE_ATTR_RW(fan1_beep, beep, 5); | 
|  | static SENSOR_DEVICE_ATTR_RW(fan2_beep, beep, 6); | 
|  | static SENSOR_DEVICE_ATTR_RW(temp2_beep, beep, 7); | 
|  | static SENSOR_DEVICE_ATTR_RW(in4_beep, beep, 7); | 
|  |  | 
|  | static struct attribute *gl520_attributes[] = { | 
|  | &dev_attr_cpu0_vid.attr, | 
|  |  | 
|  | &sensor_dev_attr_in0_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in0_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in0_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in0_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_in0_beep.dev_attr.attr, | 
|  | &sensor_dev_attr_in1_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in1_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in1_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in1_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_in1_beep.dev_attr.attr, | 
|  | &sensor_dev_attr_in2_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in2_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in2_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in2_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_in2_beep.dev_attr.attr, | 
|  | &sensor_dev_attr_in3_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in3_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in3_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in3_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_in3_beep.dev_attr.attr, | 
|  |  | 
|  | &sensor_dev_attr_fan1_input.dev_attr.attr, | 
|  | &sensor_dev_attr_fan1_min.dev_attr.attr, | 
|  | &sensor_dev_attr_fan1_div.dev_attr.attr, | 
|  | &sensor_dev_attr_fan1_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_fan1_beep.dev_attr.attr, | 
|  | &dev_attr_fan1_off.attr, | 
|  | &sensor_dev_attr_fan2_input.dev_attr.attr, | 
|  | &sensor_dev_attr_fan2_min.dev_attr.attr, | 
|  | &sensor_dev_attr_fan2_div.dev_attr.attr, | 
|  | &sensor_dev_attr_fan2_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_fan2_beep.dev_attr.attr, | 
|  |  | 
|  | &sensor_dev_attr_temp1_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_max.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp1_beep.dev_attr.attr, | 
|  |  | 
|  | &dev_attr_alarms.attr, | 
|  | &dev_attr_beep_enable.attr, | 
|  | &dev_attr_beep_mask.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group gl520_group = { | 
|  | .attrs = gl520_attributes, | 
|  | }; | 
|  |  | 
|  | static struct attribute *gl520_attributes_in4[] = { | 
|  | &sensor_dev_attr_in4_input.dev_attr.attr, | 
|  | &sensor_dev_attr_in4_min.dev_attr.attr, | 
|  | &sensor_dev_attr_in4_max.dev_attr.attr, | 
|  | &sensor_dev_attr_in4_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_in4_beep.dev_attr.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static struct attribute *gl520_attributes_temp2[] = { | 
|  | &sensor_dev_attr_temp2_input.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_max.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_alarm.dev_attr.attr, | 
|  | &sensor_dev_attr_temp2_beep.dev_attr.attr, | 
|  | NULL | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group gl520_group_in4 = { | 
|  | .attrs = gl520_attributes_in4, | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group gl520_group_temp2 = { | 
|  | .attrs = gl520_attributes_temp2, | 
|  | }; | 
|  |  | 
|  |  | 
|  | /* | 
|  | * Real code | 
|  | */ | 
|  |  | 
|  | /* Return 0 if detection is successful, -ENODEV otherwise */ | 
|  | static int gl520_detect(struct i2c_client *client, struct i2c_board_info *info) | 
|  | { | 
|  | struct i2c_adapter *adapter = client->adapter; | 
|  |  | 
|  | if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA | | 
|  | I2C_FUNC_SMBUS_WORD_DATA)) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* Determine the chip type. */ | 
|  | if ((gl520_read_value(client, GL520_REG_CHIP_ID) != 0x20) || | 
|  | ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) || | 
|  | ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) { | 
|  | dev_dbg(&client->dev, "Unknown chip type, skipping\n"); | 
|  | return -ENODEV; | 
|  | } | 
|  |  | 
|  | strlcpy(info->type, "gl520sm", I2C_NAME_SIZE); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* Called when we have found a new GL520SM. */ | 
|  | static void gl520_init_client(struct i2c_client *client) | 
|  | { | 
|  | struct gl520_data *data = i2c_get_clientdata(client); | 
|  | u8 oldconf, conf; | 
|  |  | 
|  | conf = oldconf = gl520_read_value(client, GL520_REG_CONF); | 
|  |  | 
|  | data->alarm_mask = 0xff; | 
|  | data->vrm = vid_which_vrm(); | 
|  |  | 
|  | if (extra_sensor_type == 1) | 
|  | conf &= ~0x10; | 
|  | else if (extra_sensor_type == 2) | 
|  | conf |= 0x10; | 
|  | data->two_temps = !(conf & 0x10); | 
|  |  | 
|  | /* If IRQ# is disabled, we can safely force comparator mode */ | 
|  | if (!(conf & 0x20)) | 
|  | conf &= 0xf7; | 
|  |  | 
|  | /* Enable monitoring if needed */ | 
|  | conf |= 0x40; | 
|  |  | 
|  | if (conf != oldconf) | 
|  | gl520_write_value(client, GL520_REG_CONF, conf); | 
|  |  | 
|  | gl520_update_device(&(client->dev)); | 
|  |  | 
|  | if (data->fan_min[0] == 0) | 
|  | data->alarm_mask &= ~0x20; | 
|  | if (data->fan_min[1] == 0) | 
|  | data->alarm_mask &= ~0x40; | 
|  |  | 
|  | data->beep_mask &= data->alarm_mask; | 
|  | gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask); | 
|  | } | 
|  |  | 
|  | static int gl520_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | struct device *dev = &client->dev; | 
|  | struct device *hwmon_dev; | 
|  | struct gl520_data *data; | 
|  |  | 
|  | data = devm_kzalloc(dev, sizeof(struct gl520_data), GFP_KERNEL); | 
|  | if (!data) | 
|  | return -ENOMEM; | 
|  |  | 
|  | i2c_set_clientdata(client, data); | 
|  | mutex_init(&data->update_lock); | 
|  | data->client = client; | 
|  |  | 
|  | /* Initialize the GL520SM chip */ | 
|  | gl520_init_client(client); | 
|  |  | 
|  | /* sysfs hooks */ | 
|  | data->groups[0] = &gl520_group; | 
|  |  | 
|  | if (data->two_temps) | 
|  | data->groups[1] = &gl520_group_temp2; | 
|  | else | 
|  | data->groups[1] = &gl520_group_in4; | 
|  |  | 
|  | hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, | 
|  | data, data->groups); | 
|  | return PTR_ERR_OR_ZERO(hwmon_dev); | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id gl520_id[] = { | 
|  | { "gl520sm", 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, gl520_id); | 
|  |  | 
|  | static struct i2c_driver gl520_driver = { | 
|  | .class		= I2C_CLASS_HWMON, | 
|  | .driver = { | 
|  | .name	= "gl520sm", | 
|  | }, | 
|  | .probe		= gl520_probe, | 
|  | .id_table	= gl520_id, | 
|  | .detect		= gl520_detect, | 
|  | .address_list	= normal_i2c, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(gl520_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Frodo Looijaard <[email protected]>, " | 
|  | "Kyösti Mälkki <[email protected]>, " | 
|  | "Maarten Deprez <[email protected]>"); | 
|  | MODULE_DESCRIPTION("GL520SM driver"); | 
|  | MODULE_LICENSE("GPL"); |