|  | /* | 
|  | * GPIO controller driver for Intel Lynxpoint PCH chipset> | 
|  | * Copyright (c) 2012, Intel Corporation. | 
|  | * | 
|  | * Author: Mathias Nyman <[email protected]> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms and conditions of the GNU General Public License, | 
|  | * version 2, as published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope it will be useful, but WITHOUT | 
|  | * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or | 
|  | * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for | 
|  | * more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License along with | 
|  | * this program; if not, write to the Free Software Foundation, Inc., | 
|  | * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/bitops.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/irq.h> | 
|  | #include <linux/gpio.h> | 
|  | #include <linux/irqdomain.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/acpi.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/io.h> | 
|  |  | 
|  | /* LynxPoint chipset has support for 94 gpio pins */ | 
|  |  | 
|  | #define LP_NUM_GPIO	94 | 
|  |  | 
|  | /* Bitmapped register offsets */ | 
|  | #define LP_ACPI_OWNED	0x00 /* Bitmap, set by bios, 0: pin reserved for ACPI */ | 
|  | #define LP_GC		0x7C /* set APIC IRQ to IRQ14 or IRQ15 for all pins */ | 
|  | #define LP_INT_STAT	0x80 | 
|  | #define LP_INT_ENABLE	0x90 | 
|  |  | 
|  | /* Each pin has two 32 bit config registers, starting at 0x100 */ | 
|  | #define LP_CONFIG1	0x100 | 
|  | #define LP_CONFIG2	0x104 | 
|  |  | 
|  | /* LP_CONFIG1 reg bits */ | 
|  | #define OUT_LVL_BIT	BIT(31) | 
|  | #define IN_LVL_BIT	BIT(30) | 
|  | #define TRIG_SEL_BIT	BIT(4) /* 0: Edge, 1: Level */ | 
|  | #define INT_INV_BIT	BIT(3) /* Invert interrupt triggering */ | 
|  | #define DIR_BIT		BIT(2) /* 0: Output, 1: Input */ | 
|  | #define USE_SEL_BIT	BIT(0) /* 0: Native, 1: GPIO */ | 
|  |  | 
|  | /* LP_CONFIG2 reg bits */ | 
|  | #define GPINDIS_BIT	BIT(2) /* disable input sensing */ | 
|  | #define GPIWP_BIT	(BIT(0) | BIT(1)) /* weak pull options */ | 
|  |  | 
|  | struct lp_gpio { | 
|  | struct gpio_chip	chip; | 
|  | struct irq_domain	*domain; | 
|  | struct platform_device	*pdev; | 
|  | spinlock_t		lock; | 
|  | unsigned long		reg_base; | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Lynxpoint gpios are controlled through both bitmapped registers and | 
|  | * per gpio specific registers. The bitmapped registers are in chunks of | 
|  | * 3 x 32bit registers to cover all 94 gpios | 
|  | * | 
|  | * per gpio specific registers consist of two 32bit registers per gpio | 
|  | * (LP_CONFIG1 and LP_CONFIG2), with 94 gpios there's a total of | 
|  | * 188 config registes. | 
|  | * | 
|  | * A simplified view of the register layout look like this: | 
|  | * | 
|  | * LP_ACPI_OWNED[31:0] gpio ownerships for gpios 0-31  (bitmapped registers) | 
|  | * LP_ACPI_OWNED[63:32] gpio ownerships for gpios 32-63 | 
|  | * LP_ACPI_OWNED[94:64] gpio ownerships for gpios 63-94 | 
|  | * ... | 
|  | * LP_INT_ENABLE[31:0] ... | 
|  | * LP_INT_ENABLE[63:31] ... | 
|  | * LP_INT_ENABLE[94:64] ... | 
|  | * LP0_CONFIG1 (gpio 0) config1 reg for gpio 0 (per gpio registers) | 
|  | * LP0_CONFIG2 (gpio 0) config2 reg for gpio 0 | 
|  | * LP1_CONFIG1 (gpio 1) config1 reg for gpio 1 | 
|  | * LP1_CONFIG2 (gpio 1) config2 reg for gpio 1 | 
|  | * LP2_CONFIG1 (gpio 2) ... | 
|  | * LP2_CONFIG2 (gpio 2) ... | 
|  | * ... | 
|  | * LP94_CONFIG1 (gpio 94) ... | 
|  | * LP94_CONFIG2 (gpio 94) ... | 
|  | */ | 
|  |  | 
|  | static unsigned long lp_gpio_reg(struct gpio_chip *chip, unsigned offset, | 
|  | int reg) | 
|  | { | 
|  | struct lp_gpio *lg = container_of(chip, struct lp_gpio, chip); | 
|  | int reg_offset; | 
|  |  | 
|  | if (reg == LP_CONFIG1 || reg == LP_CONFIG2) | 
|  | /* per gpio specific config registers */ | 
|  | reg_offset = offset * 8; | 
|  | else | 
|  | /* bitmapped registers */ | 
|  | reg_offset = (offset / 32) * 4; | 
|  |  | 
|  | return lg->reg_base + reg + reg_offset; | 
|  | } | 
|  |  | 
|  | static int lp_gpio_request(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct lp_gpio *lg = container_of(chip, struct lp_gpio, chip); | 
|  | unsigned long reg = lp_gpio_reg(chip, offset, LP_CONFIG1); | 
|  | unsigned long conf2 = lp_gpio_reg(chip, offset, LP_CONFIG2); | 
|  | unsigned long acpi_use = lp_gpio_reg(chip, offset, LP_ACPI_OWNED); | 
|  |  | 
|  | pm_runtime_get(&lg->pdev->dev); /* should we put if failed */ | 
|  |  | 
|  | /* Fail if BIOS reserved pin for ACPI use */ | 
|  | if (!(inl(acpi_use) & BIT(offset % 32))) { | 
|  | dev_err(&lg->pdev->dev, "gpio %d reserved for ACPI\n", offset); | 
|  | return -EBUSY; | 
|  | } | 
|  | /* Fail if pin is in alternate function mode (not GPIO mode) */ | 
|  | if (!(inl(reg) & USE_SEL_BIT)) | 
|  | return -ENODEV; | 
|  |  | 
|  | /* enable input sensing */ | 
|  | outl(inl(conf2) & ~GPINDIS_BIT, conf2); | 
|  |  | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void lp_gpio_free(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct lp_gpio *lg = container_of(chip, struct lp_gpio, chip); | 
|  | unsigned long conf2 = lp_gpio_reg(chip, offset, LP_CONFIG2); | 
|  |  | 
|  | /* disable input sensing */ | 
|  | outl(inl(conf2) | GPINDIS_BIT, conf2); | 
|  |  | 
|  | pm_runtime_put(&lg->pdev->dev); | 
|  | } | 
|  |  | 
|  | static int lp_irq_type(struct irq_data *d, unsigned type) | 
|  | { | 
|  | struct lp_gpio *lg = irq_data_get_irq_chip_data(d); | 
|  | u32 hwirq = irqd_to_hwirq(d); | 
|  | unsigned long flags; | 
|  | u32 value; | 
|  | unsigned long reg = lp_gpio_reg(&lg->chip, hwirq, LP_CONFIG1); | 
|  |  | 
|  | if (hwirq >= lg->chip.ngpio) | 
|  | return -EINVAL; | 
|  |  | 
|  | spin_lock_irqsave(&lg->lock, flags); | 
|  | value = inl(reg); | 
|  |  | 
|  | /* set both TRIG_SEL and INV bits to 0 for rising edge */ | 
|  | if (type & IRQ_TYPE_EDGE_RISING) | 
|  | value &= ~(TRIG_SEL_BIT | INT_INV_BIT); | 
|  |  | 
|  | /* TRIG_SEL bit 0, INV bit 1 for falling edge */ | 
|  | if (type & IRQ_TYPE_EDGE_FALLING) | 
|  | value = (value | INT_INV_BIT) & ~TRIG_SEL_BIT; | 
|  |  | 
|  | /* TRIG_SEL bit 1, INV bit 0 for level low */ | 
|  | if (type & IRQ_TYPE_LEVEL_LOW) | 
|  | value = (value | TRIG_SEL_BIT) & ~INT_INV_BIT; | 
|  |  | 
|  | /* TRIG_SEL bit 1, INV bit 1 for level high */ | 
|  | if (type & IRQ_TYPE_LEVEL_HIGH) | 
|  | value |= TRIG_SEL_BIT | INT_INV_BIT; | 
|  |  | 
|  | outl(value, reg); | 
|  | spin_unlock_irqrestore(&lg->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lp_gpio_get(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | unsigned long reg = lp_gpio_reg(chip, offset, LP_CONFIG1); | 
|  | return inl(reg) & IN_LVL_BIT; | 
|  | } | 
|  |  | 
|  | static void lp_gpio_set(struct gpio_chip *chip, unsigned offset, int value) | 
|  | { | 
|  | struct lp_gpio *lg = container_of(chip, struct lp_gpio, chip); | 
|  | unsigned long reg = lp_gpio_reg(chip, offset, LP_CONFIG1); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&lg->lock, flags); | 
|  |  | 
|  | if (value) | 
|  | outl(inl(reg) | OUT_LVL_BIT, reg); | 
|  | else | 
|  | outl(inl(reg) & ~OUT_LVL_BIT, reg); | 
|  |  | 
|  | spin_unlock_irqrestore(&lg->lock, flags); | 
|  | } | 
|  |  | 
|  | static int lp_gpio_direction_input(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct lp_gpio *lg = container_of(chip, struct lp_gpio, chip); | 
|  | unsigned long reg = lp_gpio_reg(chip, offset, LP_CONFIG1); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&lg->lock, flags); | 
|  | outl(inl(reg) | DIR_BIT, reg); | 
|  | spin_unlock_irqrestore(&lg->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lp_gpio_direction_output(struct gpio_chip *chip, | 
|  | unsigned offset, int value) | 
|  | { | 
|  | struct lp_gpio *lg = container_of(chip, struct lp_gpio, chip); | 
|  | unsigned long reg = lp_gpio_reg(chip, offset, LP_CONFIG1); | 
|  | unsigned long flags; | 
|  |  | 
|  | lp_gpio_set(chip, offset, value); | 
|  |  | 
|  | spin_lock_irqsave(&lg->lock, flags); | 
|  | outl(inl(reg) & ~DIR_BIT, reg); | 
|  | spin_unlock_irqrestore(&lg->lock, flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lp_gpio_to_irq(struct gpio_chip *chip, unsigned offset) | 
|  | { | 
|  | struct lp_gpio *lg = container_of(chip, struct lp_gpio, chip); | 
|  | return irq_create_mapping(lg->domain, offset); | 
|  | } | 
|  |  | 
|  | static void lp_gpio_irq_handler(unsigned irq, struct irq_desc *desc) | 
|  | { | 
|  | struct irq_data *data = irq_desc_get_irq_data(desc); | 
|  | struct lp_gpio *lg = irq_data_get_irq_handler_data(data); | 
|  | struct irq_chip *chip = irq_data_get_irq_chip(data); | 
|  | u32 base, pin, mask; | 
|  | unsigned long reg, pending; | 
|  | unsigned virq; | 
|  |  | 
|  | /* check from GPIO controller which pin triggered the interrupt */ | 
|  | for (base = 0; base < lg->chip.ngpio; base += 32) { | 
|  | reg = lp_gpio_reg(&lg->chip, base, LP_INT_STAT); | 
|  |  | 
|  | while ((pending = inl(reg))) { | 
|  | pin = __ffs(pending); | 
|  | mask = BIT(pin); | 
|  | /* Clear before handling so we don't lose an edge */ | 
|  | outl(mask, reg); | 
|  | virq = irq_find_mapping(lg->domain, base + pin); | 
|  | generic_handle_irq(virq); | 
|  | } | 
|  | } | 
|  | chip->irq_eoi(data); | 
|  | } | 
|  |  | 
|  | static void lp_irq_unmask(struct irq_data *d) | 
|  | { | 
|  | } | 
|  |  | 
|  | static void lp_irq_mask(struct irq_data *d) | 
|  | { | 
|  | } | 
|  |  | 
|  | static void lp_irq_enable(struct irq_data *d) | 
|  | { | 
|  | struct lp_gpio *lg = irq_data_get_irq_chip_data(d); | 
|  | u32 hwirq = irqd_to_hwirq(d); | 
|  | unsigned long reg = lp_gpio_reg(&lg->chip, hwirq, LP_INT_ENABLE); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&lg->lock, flags); | 
|  | outl(inl(reg) | BIT(hwirq % 32), reg); | 
|  | spin_unlock_irqrestore(&lg->lock, flags); | 
|  | } | 
|  |  | 
|  | static void lp_irq_disable(struct irq_data *d) | 
|  | { | 
|  | struct lp_gpio *lg = irq_data_get_irq_chip_data(d); | 
|  | u32 hwirq = irqd_to_hwirq(d); | 
|  | unsigned long reg = lp_gpio_reg(&lg->chip, hwirq, LP_INT_ENABLE); | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&lg->lock, flags); | 
|  | outl(inl(reg) & ~BIT(hwirq % 32), reg); | 
|  | spin_unlock_irqrestore(&lg->lock, flags); | 
|  | } | 
|  |  | 
|  | static struct irq_chip lp_irqchip = { | 
|  | .name = "LP-GPIO", | 
|  | .irq_mask = lp_irq_mask, | 
|  | .irq_unmask = lp_irq_unmask, | 
|  | .irq_enable = lp_irq_enable, | 
|  | .irq_disable = lp_irq_disable, | 
|  | .irq_set_type = lp_irq_type, | 
|  | .flags = IRQCHIP_SKIP_SET_WAKE, | 
|  | }; | 
|  |  | 
|  | static void lp_gpio_irq_init_hw(struct lp_gpio *lg) | 
|  | { | 
|  | unsigned long reg; | 
|  | unsigned base; | 
|  |  | 
|  | for (base = 0; base < lg->chip.ngpio; base += 32) { | 
|  | /* disable gpio pin interrupts */ | 
|  | reg = lp_gpio_reg(&lg->chip, base, LP_INT_ENABLE); | 
|  | outl(0, reg); | 
|  | /* Clear interrupt status register */ | 
|  | reg = lp_gpio_reg(&lg->chip, base, LP_INT_STAT); | 
|  | outl(0xffffffff, reg); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int lp_gpio_irq_map(struct irq_domain *d, unsigned int virq, | 
|  | irq_hw_number_t hw) | 
|  | { | 
|  | struct lp_gpio *lg = d->host_data; | 
|  |  | 
|  | irq_set_chip_and_handler_name(virq, &lp_irqchip, handle_simple_irq, | 
|  | "demux"); | 
|  | irq_set_chip_data(virq, lg); | 
|  | irq_set_irq_type(virq, IRQ_TYPE_NONE); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct irq_domain_ops lp_gpio_irq_ops = { | 
|  | .map = lp_gpio_irq_map, | 
|  | }; | 
|  |  | 
|  | static int lp_gpio_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct lp_gpio *lg; | 
|  | struct gpio_chip *gc; | 
|  | struct resource *io_rc, *irq_rc; | 
|  | struct device *dev = &pdev->dev; | 
|  | unsigned long reg_len; | 
|  | unsigned hwirq; | 
|  | int ret = -ENODEV; | 
|  |  | 
|  | lg = devm_kzalloc(dev, sizeof(struct lp_gpio), GFP_KERNEL); | 
|  | if (!lg) { | 
|  | dev_err(dev, "can't allocate lp_gpio chip data\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | lg->pdev = pdev; | 
|  | platform_set_drvdata(pdev, lg); | 
|  |  | 
|  | io_rc = platform_get_resource(pdev, IORESOURCE_IO, 0); | 
|  | irq_rc = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | 
|  |  | 
|  | if (!io_rc) { | 
|  | dev_err(dev, "missing IO resources\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | lg->reg_base = io_rc->start; | 
|  | reg_len = resource_size(io_rc); | 
|  |  | 
|  | if (!devm_request_region(dev, lg->reg_base, reg_len, "lp-gpio")) { | 
|  | dev_err(dev, "failed requesting IO region 0x%x\n", | 
|  | (unsigned int)lg->reg_base); | 
|  | return -EBUSY; | 
|  | } | 
|  |  | 
|  | spin_lock_init(&lg->lock); | 
|  |  | 
|  | gc = &lg->chip; | 
|  | gc->label = dev_name(dev); | 
|  | gc->owner = THIS_MODULE; | 
|  | gc->request = lp_gpio_request; | 
|  | gc->free = lp_gpio_free; | 
|  | gc->direction_input = lp_gpio_direction_input; | 
|  | gc->direction_output = lp_gpio_direction_output; | 
|  | gc->get = lp_gpio_get; | 
|  | gc->set = lp_gpio_set; | 
|  | gc->base = -1; | 
|  | gc->ngpio = LP_NUM_GPIO; | 
|  | gc->can_sleep = 0; | 
|  | gc->dev = dev; | 
|  |  | 
|  | /* set up interrupts  */ | 
|  | if (irq_rc && irq_rc->start) { | 
|  | hwirq = irq_rc->start; | 
|  | gc->to_irq = lp_gpio_to_irq; | 
|  |  | 
|  | lg->domain = irq_domain_add_linear(NULL, LP_NUM_GPIO, | 
|  | &lp_gpio_irq_ops, lg); | 
|  | if (!lg->domain) | 
|  | return -ENXIO; | 
|  |  | 
|  | lp_gpio_irq_init_hw(lg); | 
|  |  | 
|  | irq_set_handler_data(hwirq, lg); | 
|  | irq_set_chained_handler(hwirq, lp_gpio_irq_handler); | 
|  | } | 
|  |  | 
|  | ret = gpiochip_add(gc); | 
|  | if (ret) { | 
|  | dev_err(dev, "failed adding lp-gpio chip\n"); | 
|  | return ret; | 
|  | } | 
|  | pm_runtime_enable(dev); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lp_gpio_runtime_suspend(struct device *dev) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lp_gpio_runtime_resume(struct device *dev) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct dev_pm_ops lp_gpio_pm_ops = { | 
|  | .runtime_suspend = lp_gpio_runtime_suspend, | 
|  | .runtime_resume = lp_gpio_runtime_resume, | 
|  | }; | 
|  |  | 
|  | static const struct acpi_device_id lynxpoint_gpio_acpi_match[] = { | 
|  | { "INT33C7", 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(acpi, lynxpoint_gpio_acpi_match); | 
|  |  | 
|  | static int lp_gpio_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct lp_gpio *lg = platform_get_drvdata(pdev); | 
|  | int err; | 
|  | err = gpiochip_remove(&lg->chip); | 
|  | if (err) | 
|  | dev_warn(&pdev->dev, "failed to remove gpio_chip.\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct platform_driver lp_gpio_driver = { | 
|  | .probe          = lp_gpio_probe, | 
|  | .remove         = lp_gpio_remove, | 
|  | .driver         = { | 
|  | .name   = "lp_gpio", | 
|  | .owner  = THIS_MODULE, | 
|  | .pm	= &lp_gpio_pm_ops, | 
|  | .acpi_match_table = ACPI_PTR(lynxpoint_gpio_acpi_match), | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static int __init lp_gpio_init(void) | 
|  | { | 
|  | return platform_driver_register(&lp_gpio_driver); | 
|  | } | 
|  |  | 
|  | subsys_initcall(lp_gpio_init); |