| /* Load firmware into Core B on a BF561 | |
| * | |
| * Copyright 2004-2009 Analog Devices Inc. | |
| * Licensed under the GPL-2 or later. | |
| */ | |
| /* The Core B reset func requires code in the application that is loaded into | |
| * Core B. In order to reset, the application needs to install an interrupt | |
| * handler for Supplemental Interrupt 0, that sets RETI to 0xff600000 and | |
| * writes bit 11 of SICB_SYSCR when bit 5 of SICA_SYSCR is 0. This causes Core | |
| * B to stall when Supplemental Interrupt 0 is set, and will reset PC to | |
| * 0xff600000 when COREB_SRAM_INIT is cleared. | |
| */ | |
| #include <linux/device.h> | |
| #include <linux/fs.h> | |
| #include <linux/kernel.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/module.h> | |
| #define CMD_COREB_START _IO('b', 0) | |
| #define CMD_COREB_STOP _IO('b', 1) | |
| #define CMD_COREB_RESET _IO('b', 2) | |
| static long | |
| coreb_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | |
| { | |
| int ret = 0; | |
| switch (cmd) { | |
| case CMD_COREB_START: | |
| bfin_write_SYSCR(bfin_read_SYSCR() & ~0x0020); | |
| break; | |
| case CMD_COREB_STOP: | |
| bfin_write_SYSCR(bfin_read_SYSCR() | 0x0020); | |
| bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080); | |
| break; | |
| case CMD_COREB_RESET: | |
| bfin_write_SICB_SYSCR(bfin_read_SICB_SYSCR() | 0x0080); | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| break; | |
| } | |
| CSYNC(); | |
| return ret; | |
| } | |
| static const struct file_operations coreb_fops = { | |
| .owner = THIS_MODULE, | |
| .unlocked_ioctl = coreb_ioctl, | |
| .llseek = noop_llseek, | |
| }; | |
| static struct miscdevice coreb_dev = { | |
| .minor = MISC_DYNAMIC_MINOR, | |
| .name = "coreb", | |
| .fops = &coreb_fops, | |
| }; | |
| static int __init bf561_coreb_init(void) | |
| { | |
| return misc_register(&coreb_dev); | |
| } | |
| module_init(bf561_coreb_init); | |
| static void __exit bf561_coreb_exit(void) | |
| { | |
| misc_deregister(&coreb_dev); | |
| } | |
| module_exit(bf561_coreb_exit); | |
| MODULE_AUTHOR("Bas Vermeulen <[email protected]>"); | |
| MODULE_DESCRIPTION("BF561 Core B Support"); | |
| MODULE_LICENSE("GPL"); |