| /******************************************************************* | |
| * This file is part of the Emulex Linux Device Driver for * | |
| * Fibre Channel Host Bus Adapters. * | |
| * Copyright (C) 2009-2015 Emulex. All rights reserved. * | |
| * EMULEX and SLI are trademarks of Emulex. * | |
| * www.emulex.com * | |
| * * | |
| * This program is free software; you can redistribute it and/or * | |
| * modify it under the terms of version 2 of the GNU General * | |
| * Public License as published by the Free Software Foundation. * | |
| * This program is distributed in the hope that it will be useful. * | |
| * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND * | |
| * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, * | |
| * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE * | |
| * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD * | |
| * TO BE LEGALLY INVALID. See the GNU General Public License for * | |
| * more details, a copy of which can be found in the file COPYING * | |
| * included with this package. * | |
| *******************************************************************/ | |
| #include <linux/interrupt.h> | |
| #include <linux/mempool.h> | |
| #include <linux/pci.h> | |
| #include <linux/slab.h> | |
| #include <linux/delay.h> | |
| #include <linux/list.h> | |
| #include <scsi/scsi.h> | |
| #include <scsi/scsi_host.h> | |
| #include <scsi/scsi_transport_fc.h> | |
| #include <scsi/scsi_bsg_fc.h> | |
| #include <scsi/fc/fc_fs.h> | |
| #include "lpfc_hw4.h" | |
| #include "lpfc_hw.h" | |
| #include "lpfc_sli.h" | |
| #include "lpfc_sli4.h" | |
| #include "lpfc_nl.h" | |
| #include "lpfc_bsg.h" | |
| #include "lpfc_disc.h" | |
| #include "lpfc_scsi.h" | |
| #include "lpfc.h" | |
| #include "lpfc_logmsg.h" | |
| #include "lpfc_crtn.h" | |
| #include "lpfc_debugfs.h" | |
| #include "lpfc_vport.h" | |
| #include "lpfc_version.h" | |
| struct lpfc_bsg_event { | |
| struct list_head node; | |
| struct kref kref; | |
| wait_queue_head_t wq; | |
| /* Event type and waiter identifiers */ | |
| uint32_t type_mask; | |
| uint32_t req_id; | |
| uint32_t reg_id; | |
| /* next two flags are here for the auto-delete logic */ | |
| unsigned long wait_time_stamp; | |
| int waiting; | |
| /* seen and not seen events */ | |
| struct list_head events_to_get; | |
| struct list_head events_to_see; | |
| /* driver data associated with the job */ | |
| void *dd_data; | |
| }; | |
| struct lpfc_bsg_iocb { | |
| struct lpfc_iocbq *cmdiocbq; | |
| struct lpfc_dmabuf *rmp; | |
| struct lpfc_nodelist *ndlp; | |
| }; | |
| struct lpfc_bsg_mbox { | |
| LPFC_MBOXQ_t *pmboxq; | |
| MAILBOX_t *mb; | |
| struct lpfc_dmabuf *dmabuffers; /* for BIU diags */ | |
| uint8_t *ext; /* extended mailbox data */ | |
| uint32_t mbOffset; /* from app */ | |
| uint32_t inExtWLen; /* from app */ | |
| uint32_t outExtWLen; /* from app */ | |
| }; | |
| #define MENLO_DID 0x0000FC0E | |
| struct lpfc_bsg_menlo { | |
| struct lpfc_iocbq *cmdiocbq; | |
| struct lpfc_dmabuf *rmp; | |
| }; | |
| #define TYPE_EVT 1 | |
| #define TYPE_IOCB 2 | |
| #define TYPE_MBOX 3 | |
| #define TYPE_MENLO 4 | |
| struct bsg_job_data { | |
| uint32_t type; | |
| struct fc_bsg_job *set_job; /* job waiting for this iocb to finish */ | |
| union { | |
| struct lpfc_bsg_event *evt; | |
| struct lpfc_bsg_iocb iocb; | |
| struct lpfc_bsg_mbox mbox; | |
| struct lpfc_bsg_menlo menlo; | |
| } context_un; | |
| }; | |
| struct event_data { | |
| struct list_head node; | |
| uint32_t type; | |
| uint32_t immed_dat; | |
| void *data; | |
| uint32_t len; | |
| }; | |
| #define BUF_SZ_4K 4096 | |
| #define SLI_CT_ELX_LOOPBACK 0x10 | |
| enum ELX_LOOPBACK_CMD { | |
| ELX_LOOPBACK_XRI_SETUP, | |
| ELX_LOOPBACK_DATA, | |
| }; | |
| #define ELX_LOOPBACK_HEADER_SZ \ | |
| (size_t)(&((struct lpfc_sli_ct_request *)NULL)->un) | |
| struct lpfc_dmabufext { | |
| struct lpfc_dmabuf dma; | |
| uint32_t size; | |
| uint32_t flag; | |
| }; | |
| static void | |
| lpfc_free_bsg_buffers(struct lpfc_hba *phba, struct lpfc_dmabuf *mlist) | |
| { | |
| struct lpfc_dmabuf *mlast, *next_mlast; | |
| if (mlist) { | |
| list_for_each_entry_safe(mlast, next_mlast, &mlist->list, | |
| list) { | |
| lpfc_mbuf_free(phba, mlast->virt, mlast->phys); | |
| list_del(&mlast->list); | |
| kfree(mlast); | |
| } | |
| lpfc_mbuf_free(phba, mlist->virt, mlist->phys); | |
| kfree(mlist); | |
| } | |
| return; | |
| } | |
| static struct lpfc_dmabuf * | |
| lpfc_alloc_bsg_buffers(struct lpfc_hba *phba, unsigned int size, | |
| int outbound_buffers, struct ulp_bde64 *bpl, | |
| int *bpl_entries) | |
| { | |
| struct lpfc_dmabuf *mlist = NULL; | |
| struct lpfc_dmabuf *mp; | |
| unsigned int bytes_left = size; | |
| /* Verify we can support the size specified */ | |
| if (!size || (size > (*bpl_entries * LPFC_BPL_SIZE))) | |
| return NULL; | |
| /* Determine the number of dma buffers to allocate */ | |
| *bpl_entries = (size % LPFC_BPL_SIZE ? size/LPFC_BPL_SIZE + 1 : | |
| size/LPFC_BPL_SIZE); | |
| /* Allocate dma buffer and place in BPL passed */ | |
| while (bytes_left) { | |
| /* Allocate dma buffer */ | |
| mp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); | |
| if (!mp) { | |
| if (mlist) | |
| lpfc_free_bsg_buffers(phba, mlist); | |
| return NULL; | |
| } | |
| INIT_LIST_HEAD(&mp->list); | |
| mp->virt = lpfc_mbuf_alloc(phba, MEM_PRI, &(mp->phys)); | |
| if (!mp->virt) { | |
| kfree(mp); | |
| if (mlist) | |
| lpfc_free_bsg_buffers(phba, mlist); | |
| return NULL; | |
| } | |
| /* Queue it to a linked list */ | |
| if (!mlist) | |
| mlist = mp; | |
| else | |
| list_add_tail(&mp->list, &mlist->list); | |
| /* Add buffer to buffer pointer list */ | |
| if (outbound_buffers) | |
| bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64; | |
| else | |
| bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I; | |
| bpl->addrLow = le32_to_cpu(putPaddrLow(mp->phys)); | |
| bpl->addrHigh = le32_to_cpu(putPaddrHigh(mp->phys)); | |
| bpl->tus.f.bdeSize = (uint16_t) | |
| (bytes_left >= LPFC_BPL_SIZE ? LPFC_BPL_SIZE : | |
| bytes_left); | |
| bytes_left -= bpl->tus.f.bdeSize; | |
| bpl->tus.w = le32_to_cpu(bpl->tus.w); | |
| bpl++; | |
| } | |
| return mlist; | |
| } | |
| static unsigned int | |
| lpfc_bsg_copy_data(struct lpfc_dmabuf *dma_buffers, | |
| struct fc_bsg_buffer *bsg_buffers, | |
| unsigned int bytes_to_transfer, int to_buffers) | |
| { | |
| struct lpfc_dmabuf *mp; | |
| unsigned int transfer_bytes, bytes_copied = 0; | |
| unsigned int sg_offset, dma_offset; | |
| unsigned char *dma_address, *sg_address; | |
| LIST_HEAD(temp_list); | |
| struct sg_mapping_iter miter; | |
| unsigned long flags; | |
| unsigned int sg_flags = SG_MITER_ATOMIC; | |
| bool sg_valid; | |
| list_splice_init(&dma_buffers->list, &temp_list); | |
| list_add(&dma_buffers->list, &temp_list); | |
| sg_offset = 0; | |
| if (to_buffers) | |
| sg_flags |= SG_MITER_FROM_SG; | |
| else | |
| sg_flags |= SG_MITER_TO_SG; | |
| sg_miter_start(&miter, bsg_buffers->sg_list, bsg_buffers->sg_cnt, | |
| sg_flags); | |
| local_irq_save(flags); | |
| sg_valid = sg_miter_next(&miter); | |
| list_for_each_entry(mp, &temp_list, list) { | |
| dma_offset = 0; | |
| while (bytes_to_transfer && sg_valid && | |
| (dma_offset < LPFC_BPL_SIZE)) { | |
| dma_address = mp->virt + dma_offset; | |
| if (sg_offset) { | |
| /* Continue previous partial transfer of sg */ | |
| sg_address = miter.addr + sg_offset; | |
| transfer_bytes = miter.length - sg_offset; | |
| } else { | |
| sg_address = miter.addr; | |
| transfer_bytes = miter.length; | |
| } | |
| if (bytes_to_transfer < transfer_bytes) | |
| transfer_bytes = bytes_to_transfer; | |
| if (transfer_bytes > (LPFC_BPL_SIZE - dma_offset)) | |
| transfer_bytes = LPFC_BPL_SIZE - dma_offset; | |
| if (to_buffers) | |
| memcpy(dma_address, sg_address, transfer_bytes); | |
| else | |
| memcpy(sg_address, dma_address, transfer_bytes); | |
| dma_offset += transfer_bytes; | |
| sg_offset += transfer_bytes; | |
| bytes_to_transfer -= transfer_bytes; | |
| bytes_copied += transfer_bytes; | |
| if (sg_offset >= miter.length) { | |
| sg_offset = 0; | |
| sg_valid = sg_miter_next(&miter); | |
| } | |
| } | |
| } | |
| sg_miter_stop(&miter); | |
| local_irq_restore(flags); | |
| list_del_init(&dma_buffers->list); | |
| list_splice(&temp_list, &dma_buffers->list); | |
| return bytes_copied; | |
| } | |
| /** | |
| * lpfc_bsg_send_mgmt_cmd_cmp - lpfc_bsg_send_mgmt_cmd's completion handler | |
| * @phba: Pointer to HBA context object. | |
| * @cmdiocbq: Pointer to command iocb. | |
| * @rspiocbq: Pointer to response iocb. | |
| * | |
| * This function is the completion handler for iocbs issued using | |
| * lpfc_bsg_send_mgmt_cmd function. This function is called by the | |
| * ring event handler function without any lock held. This function | |
| * can be called from both worker thread context and interrupt | |
| * context. This function also can be called from another thread which | |
| * cleans up the SLI layer objects. | |
| * This function copies the contents of the response iocb to the | |
| * response iocb memory object provided by the caller of | |
| * lpfc_sli_issue_iocb_wait and then wakes up the thread which | |
| * sleeps for the iocb completion. | |
| **/ | |
| static void | |
| lpfc_bsg_send_mgmt_cmd_cmp(struct lpfc_hba *phba, | |
| struct lpfc_iocbq *cmdiocbq, | |
| struct lpfc_iocbq *rspiocbq) | |
| { | |
| struct bsg_job_data *dd_data; | |
| struct fc_bsg_job *job; | |
| IOCB_t *rsp; | |
| struct lpfc_dmabuf *bmp, *cmp, *rmp; | |
| struct lpfc_nodelist *ndlp; | |
| struct lpfc_bsg_iocb *iocb; | |
| unsigned long flags; | |
| unsigned int rsp_size; | |
| int rc = 0; | |
| dd_data = cmdiocbq->context1; | |
| /* Determine if job has been aborted */ | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| job = dd_data->set_job; | |
| if (job) { | |
| /* Prevent timeout handling from trying to abort job */ | |
| job->dd_data = NULL; | |
| } | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| /* Close the timeout handler abort window */ | |
| spin_lock_irqsave(&phba->hbalock, flags); | |
| cmdiocbq->iocb_flag &= ~LPFC_IO_CMD_OUTSTANDING; | |
| spin_unlock_irqrestore(&phba->hbalock, flags); | |
| iocb = &dd_data->context_un.iocb; | |
| ndlp = iocb->ndlp; | |
| rmp = iocb->rmp; | |
| cmp = cmdiocbq->context2; | |
| bmp = cmdiocbq->context3; | |
| rsp = &rspiocbq->iocb; | |
| /* Copy the completed data or set the error status */ | |
| if (job) { | |
| if (rsp->ulpStatus) { | |
| if (rsp->ulpStatus == IOSTAT_LOCAL_REJECT) { | |
| switch (rsp->un.ulpWord[4] & IOERR_PARAM_MASK) { | |
| case IOERR_SEQUENCE_TIMEOUT: | |
| rc = -ETIMEDOUT; | |
| break; | |
| case IOERR_INVALID_RPI: | |
| rc = -EFAULT; | |
| break; | |
| default: | |
| rc = -EACCES; | |
| break; | |
| } | |
| } else { | |
| rc = -EACCES; | |
| } | |
| } else { | |
| rsp_size = rsp->un.genreq64.bdl.bdeSize; | |
| job->reply->reply_payload_rcv_len = | |
| lpfc_bsg_copy_data(rmp, &job->reply_payload, | |
| rsp_size, 0); | |
| } | |
| } | |
| lpfc_free_bsg_buffers(phba, cmp); | |
| lpfc_free_bsg_buffers(phba, rmp); | |
| lpfc_mbuf_free(phba, bmp->virt, bmp->phys); | |
| kfree(bmp); | |
| lpfc_sli_release_iocbq(phba, cmdiocbq); | |
| lpfc_nlp_put(ndlp); | |
| kfree(dd_data); | |
| /* Complete the job if the job is still active */ | |
| if (job) { | |
| job->reply->result = rc; | |
| job->job_done(job); | |
| } | |
| return; | |
| } | |
| /** | |
| * lpfc_bsg_send_mgmt_cmd - send a CT command from a bsg request | |
| * @job: fc_bsg_job to handle | |
| **/ | |
| static int | |
| lpfc_bsg_send_mgmt_cmd(struct fc_bsg_job *job) | |
| { | |
| struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; | |
| struct lpfc_hba *phba = vport->phba; | |
| struct lpfc_rport_data *rdata = job->rport->dd_data; | |
| struct lpfc_nodelist *ndlp = rdata->pnode; | |
| struct ulp_bde64 *bpl = NULL; | |
| uint32_t timeout; | |
| struct lpfc_iocbq *cmdiocbq = NULL; | |
| IOCB_t *cmd; | |
| struct lpfc_dmabuf *bmp = NULL, *cmp = NULL, *rmp = NULL; | |
| int request_nseg; | |
| int reply_nseg; | |
| struct bsg_job_data *dd_data; | |
| unsigned long flags; | |
| uint32_t creg_val; | |
| int rc = 0; | |
| int iocb_stat; | |
| /* in case no data is transferred */ | |
| job->reply->reply_payload_rcv_len = 0; | |
| /* allocate our bsg tracking structure */ | |
| dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); | |
| if (!dd_data) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2733 Failed allocation of dd_data\n"); | |
| rc = -ENOMEM; | |
| goto no_dd_data; | |
| } | |
| if (!lpfc_nlp_get(ndlp)) { | |
| rc = -ENODEV; | |
| goto no_ndlp; | |
| } | |
| if (ndlp->nlp_flag & NLP_ELS_SND_MASK) { | |
| rc = -ENODEV; | |
| goto free_ndlp; | |
| } | |
| cmdiocbq = lpfc_sli_get_iocbq(phba); | |
| if (!cmdiocbq) { | |
| rc = -ENOMEM; | |
| goto free_ndlp; | |
| } | |
| cmd = &cmdiocbq->iocb; | |
| bmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); | |
| if (!bmp) { | |
| rc = -ENOMEM; | |
| goto free_cmdiocbq; | |
| } | |
| bmp->virt = lpfc_mbuf_alloc(phba, 0, &bmp->phys); | |
| if (!bmp->virt) { | |
| rc = -ENOMEM; | |
| goto free_bmp; | |
| } | |
| INIT_LIST_HEAD(&bmp->list); | |
| bpl = (struct ulp_bde64 *) bmp->virt; | |
| request_nseg = LPFC_BPL_SIZE/sizeof(struct ulp_bde64); | |
| cmp = lpfc_alloc_bsg_buffers(phba, job->request_payload.payload_len, | |
| 1, bpl, &request_nseg); | |
| if (!cmp) { | |
| rc = -ENOMEM; | |
| goto free_bmp; | |
| } | |
| lpfc_bsg_copy_data(cmp, &job->request_payload, | |
| job->request_payload.payload_len, 1); | |
| bpl += request_nseg; | |
| reply_nseg = LPFC_BPL_SIZE/sizeof(struct ulp_bde64) - request_nseg; | |
| rmp = lpfc_alloc_bsg_buffers(phba, job->reply_payload.payload_len, 0, | |
| bpl, &reply_nseg); | |
| if (!rmp) { | |
| rc = -ENOMEM; | |
| goto free_cmp; | |
| } | |
| cmd->un.genreq64.bdl.ulpIoTag32 = 0; | |
| cmd->un.genreq64.bdl.addrHigh = putPaddrHigh(bmp->phys); | |
| cmd->un.genreq64.bdl.addrLow = putPaddrLow(bmp->phys); | |
| cmd->un.genreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64; | |
| cmd->un.genreq64.bdl.bdeSize = | |
| (request_nseg + reply_nseg) * sizeof(struct ulp_bde64); | |
| cmd->ulpCommand = CMD_GEN_REQUEST64_CR; | |
| cmd->un.genreq64.w5.hcsw.Fctl = (SI | LA); | |
| cmd->un.genreq64.w5.hcsw.Dfctl = 0; | |
| cmd->un.genreq64.w5.hcsw.Rctl = FC_RCTL_DD_UNSOL_CTL; | |
| cmd->un.genreq64.w5.hcsw.Type = FC_TYPE_CT; | |
| cmd->ulpBdeCount = 1; | |
| cmd->ulpLe = 1; | |
| cmd->ulpClass = CLASS3; | |
| cmd->ulpContext = ndlp->nlp_rpi; | |
| if (phba->sli_rev == LPFC_SLI_REV4) | |
| cmd->ulpContext = phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; | |
| cmd->ulpOwner = OWN_CHIP; | |
| cmdiocbq->vport = phba->pport; | |
| cmdiocbq->context3 = bmp; | |
| cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC; | |
| timeout = phba->fc_ratov * 2; | |
| cmd->ulpTimeout = timeout; | |
| cmdiocbq->iocb_cmpl = lpfc_bsg_send_mgmt_cmd_cmp; | |
| cmdiocbq->context1 = dd_data; | |
| cmdiocbq->context2 = cmp; | |
| cmdiocbq->context3 = bmp; | |
| cmdiocbq->context_un.ndlp = ndlp; | |
| dd_data->type = TYPE_IOCB; | |
| dd_data->set_job = job; | |
| dd_data->context_un.iocb.cmdiocbq = cmdiocbq; | |
| dd_data->context_un.iocb.ndlp = ndlp; | |
| dd_data->context_un.iocb.rmp = rmp; | |
| job->dd_data = dd_data; | |
| if (phba->cfg_poll & DISABLE_FCP_RING_INT) { | |
| if (lpfc_readl(phba->HCregaddr, &creg_val)) { | |
| rc = -EIO ; | |
| goto free_rmp; | |
| } | |
| creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING); | |
| writel(creg_val, phba->HCregaddr); | |
| readl(phba->HCregaddr); /* flush */ | |
| } | |
| iocb_stat = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, cmdiocbq, 0); | |
| if (iocb_stat == IOCB_SUCCESS) { | |
| spin_lock_irqsave(&phba->hbalock, flags); | |
| /* make sure the I/O had not been completed yet */ | |
| if (cmdiocbq->iocb_flag & LPFC_IO_LIBDFC) { | |
| /* open up abort window to timeout handler */ | |
| cmdiocbq->iocb_flag |= LPFC_IO_CMD_OUTSTANDING; | |
| } | |
| spin_unlock_irqrestore(&phba->hbalock, flags); | |
| return 0; /* done for now */ | |
| } else if (iocb_stat == IOCB_BUSY) { | |
| rc = -EAGAIN; | |
| } else { | |
| rc = -EIO; | |
| } | |
| /* iocb failed so cleanup */ | |
| job->dd_data = NULL; | |
| free_rmp: | |
| lpfc_free_bsg_buffers(phba, rmp); | |
| free_cmp: | |
| lpfc_free_bsg_buffers(phba, cmp); | |
| free_bmp: | |
| if (bmp->virt) | |
| lpfc_mbuf_free(phba, bmp->virt, bmp->phys); | |
| kfree(bmp); | |
| free_cmdiocbq: | |
| lpfc_sli_release_iocbq(phba, cmdiocbq); | |
| free_ndlp: | |
| lpfc_nlp_put(ndlp); | |
| no_ndlp: | |
| kfree(dd_data); | |
| no_dd_data: | |
| /* make error code available to userspace */ | |
| job->reply->result = rc; | |
| job->dd_data = NULL; | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_rport_els_cmp - lpfc_bsg_rport_els's completion handler | |
| * @phba: Pointer to HBA context object. | |
| * @cmdiocbq: Pointer to command iocb. | |
| * @rspiocbq: Pointer to response iocb. | |
| * | |
| * This function is the completion handler for iocbs issued using | |
| * lpfc_bsg_rport_els_cmp function. This function is called by the | |
| * ring event handler function without any lock held. This function | |
| * can be called from both worker thread context and interrupt | |
| * context. This function also can be called from other thread which | |
| * cleans up the SLI layer objects. | |
| * This function copies the contents of the response iocb to the | |
| * response iocb memory object provided by the caller of | |
| * lpfc_sli_issue_iocb_wait and then wakes up the thread which | |
| * sleeps for the iocb completion. | |
| **/ | |
| static void | |
| lpfc_bsg_rport_els_cmp(struct lpfc_hba *phba, | |
| struct lpfc_iocbq *cmdiocbq, | |
| struct lpfc_iocbq *rspiocbq) | |
| { | |
| struct bsg_job_data *dd_data; | |
| struct fc_bsg_job *job; | |
| IOCB_t *rsp; | |
| struct lpfc_nodelist *ndlp; | |
| struct lpfc_dmabuf *pcmd = NULL, *prsp = NULL; | |
| struct fc_bsg_ctels_reply *els_reply; | |
| uint8_t *rjt_data; | |
| unsigned long flags; | |
| unsigned int rsp_size; | |
| int rc = 0; | |
| dd_data = cmdiocbq->context1; | |
| ndlp = dd_data->context_un.iocb.ndlp; | |
| cmdiocbq->context1 = ndlp; | |
| /* Determine if job has been aborted */ | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| job = dd_data->set_job; | |
| if (job) { | |
| /* Prevent timeout handling from trying to abort job */ | |
| job->dd_data = NULL; | |
| } | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| /* Close the timeout handler abort window */ | |
| spin_lock_irqsave(&phba->hbalock, flags); | |
| cmdiocbq->iocb_flag &= ~LPFC_IO_CMD_OUTSTANDING; | |
| spin_unlock_irqrestore(&phba->hbalock, flags); | |
| rsp = &rspiocbq->iocb; | |
| pcmd = (struct lpfc_dmabuf *)cmdiocbq->context2; | |
| prsp = (struct lpfc_dmabuf *)pcmd->list.next; | |
| /* Copy the completed job data or determine the job status if job is | |
| * still active | |
| */ | |
| if (job) { | |
| if (rsp->ulpStatus == IOSTAT_SUCCESS) { | |
| rsp_size = rsp->un.elsreq64.bdl.bdeSize; | |
| job->reply->reply_payload_rcv_len = | |
| sg_copy_from_buffer(job->reply_payload.sg_list, | |
| job->reply_payload.sg_cnt, | |
| prsp->virt, | |
| rsp_size); | |
| } else if (rsp->ulpStatus == IOSTAT_LS_RJT) { | |
| job->reply->reply_payload_rcv_len = | |
| sizeof(struct fc_bsg_ctels_reply); | |
| /* LS_RJT data returned in word 4 */ | |
| rjt_data = (uint8_t *)&rsp->un.ulpWord[4]; | |
| els_reply = &job->reply->reply_data.ctels_reply; | |
| els_reply->status = FC_CTELS_STATUS_REJECT; | |
| els_reply->rjt_data.action = rjt_data[3]; | |
| els_reply->rjt_data.reason_code = rjt_data[2]; | |
| els_reply->rjt_data.reason_explanation = rjt_data[1]; | |
| els_reply->rjt_data.vendor_unique = rjt_data[0]; | |
| } else { | |
| rc = -EIO; | |
| } | |
| } | |
| lpfc_nlp_put(ndlp); | |
| lpfc_els_free_iocb(phba, cmdiocbq); | |
| kfree(dd_data); | |
| /* Complete the job if the job is still active */ | |
| if (job) { | |
| job->reply->result = rc; | |
| job->job_done(job); | |
| } | |
| return; | |
| } | |
| /** | |
| * lpfc_bsg_rport_els - send an ELS command from a bsg request | |
| * @job: fc_bsg_job to handle | |
| **/ | |
| static int | |
| lpfc_bsg_rport_els(struct fc_bsg_job *job) | |
| { | |
| struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; | |
| struct lpfc_hba *phba = vport->phba; | |
| struct lpfc_rport_data *rdata = job->rport->dd_data; | |
| struct lpfc_nodelist *ndlp = rdata->pnode; | |
| uint32_t elscmd; | |
| uint32_t cmdsize; | |
| struct lpfc_iocbq *cmdiocbq; | |
| uint16_t rpi = 0; | |
| struct bsg_job_data *dd_data; | |
| unsigned long flags; | |
| uint32_t creg_val; | |
| int rc = 0; | |
| /* in case no data is transferred */ | |
| job->reply->reply_payload_rcv_len = 0; | |
| /* verify the els command is not greater than the | |
| * maximum ELS transfer size. | |
| */ | |
| if (job->request_payload.payload_len > FCELSSIZE) { | |
| rc = -EINVAL; | |
| goto no_dd_data; | |
| } | |
| /* allocate our bsg tracking structure */ | |
| dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); | |
| if (!dd_data) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2735 Failed allocation of dd_data\n"); | |
| rc = -ENOMEM; | |
| goto no_dd_data; | |
| } | |
| elscmd = job->request->rqst_data.r_els.els_code; | |
| cmdsize = job->request_payload.payload_len; | |
| if (!lpfc_nlp_get(ndlp)) { | |
| rc = -ENODEV; | |
| goto free_dd_data; | |
| } | |
| /* We will use the allocated dma buffers by prep els iocb for command | |
| * and response to ensure if the job times out and the request is freed, | |
| * we won't be dma into memory that is no longer allocated to for the | |
| * request. | |
| */ | |
| cmdiocbq = lpfc_prep_els_iocb(vport, 1, cmdsize, 0, ndlp, | |
| ndlp->nlp_DID, elscmd); | |
| if (!cmdiocbq) { | |
| rc = -EIO; | |
| goto release_ndlp; | |
| } | |
| rpi = ndlp->nlp_rpi; | |
| /* Transfer the request payload to allocated command dma buffer */ | |
| sg_copy_to_buffer(job->request_payload.sg_list, | |
| job->request_payload.sg_cnt, | |
| ((struct lpfc_dmabuf *)cmdiocbq->context2)->virt, | |
| cmdsize); | |
| if (phba->sli_rev == LPFC_SLI_REV4) | |
| cmdiocbq->iocb.ulpContext = phba->sli4_hba.rpi_ids[rpi]; | |
| else | |
| cmdiocbq->iocb.ulpContext = rpi; | |
| cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC; | |
| cmdiocbq->context1 = dd_data; | |
| cmdiocbq->context_un.ndlp = ndlp; | |
| cmdiocbq->iocb_cmpl = lpfc_bsg_rport_els_cmp; | |
| dd_data->type = TYPE_IOCB; | |
| dd_data->set_job = job; | |
| dd_data->context_un.iocb.cmdiocbq = cmdiocbq; | |
| dd_data->context_un.iocb.ndlp = ndlp; | |
| dd_data->context_un.iocb.rmp = NULL; | |
| job->dd_data = dd_data; | |
| if (phba->cfg_poll & DISABLE_FCP_RING_INT) { | |
| if (lpfc_readl(phba->HCregaddr, &creg_val)) { | |
| rc = -EIO; | |
| goto linkdown_err; | |
| } | |
| creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING); | |
| writel(creg_val, phba->HCregaddr); | |
| readl(phba->HCregaddr); /* flush */ | |
| } | |
| rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, cmdiocbq, 0); | |
| if (rc == IOCB_SUCCESS) { | |
| spin_lock_irqsave(&phba->hbalock, flags); | |
| /* make sure the I/O had not been completed/released */ | |
| if (cmdiocbq->iocb_flag & LPFC_IO_LIBDFC) { | |
| /* open up abort window to timeout handler */ | |
| cmdiocbq->iocb_flag |= LPFC_IO_CMD_OUTSTANDING; | |
| } | |
| spin_unlock_irqrestore(&phba->hbalock, flags); | |
| return 0; /* done for now */ | |
| } else if (rc == IOCB_BUSY) { | |
| rc = -EAGAIN; | |
| } else { | |
| rc = -EIO; | |
| } | |
| /* iocb failed so cleanup */ | |
| job->dd_data = NULL; | |
| linkdown_err: | |
| cmdiocbq->context1 = ndlp; | |
| lpfc_els_free_iocb(phba, cmdiocbq); | |
| release_ndlp: | |
| lpfc_nlp_put(ndlp); | |
| free_dd_data: | |
| kfree(dd_data); | |
| no_dd_data: | |
| /* make error code available to userspace */ | |
| job->reply->result = rc; | |
| job->dd_data = NULL; | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_event_free - frees an allocated event structure | |
| * @kref: Pointer to a kref. | |
| * | |
| * Called from kref_put. Back cast the kref into an event structure address. | |
| * Free any events to get, delete associated nodes, free any events to see, | |
| * free any data then free the event itself. | |
| **/ | |
| static void | |
| lpfc_bsg_event_free(struct kref *kref) | |
| { | |
| struct lpfc_bsg_event *evt = container_of(kref, struct lpfc_bsg_event, | |
| kref); | |
| struct event_data *ed; | |
| list_del(&evt->node); | |
| while (!list_empty(&evt->events_to_get)) { | |
| ed = list_entry(evt->events_to_get.next, typeof(*ed), node); | |
| list_del(&ed->node); | |
| kfree(ed->data); | |
| kfree(ed); | |
| } | |
| while (!list_empty(&evt->events_to_see)) { | |
| ed = list_entry(evt->events_to_see.next, typeof(*ed), node); | |
| list_del(&ed->node); | |
| kfree(ed->data); | |
| kfree(ed); | |
| } | |
| kfree(evt->dd_data); | |
| kfree(evt); | |
| } | |
| /** | |
| * lpfc_bsg_event_ref - increments the kref for an event | |
| * @evt: Pointer to an event structure. | |
| **/ | |
| static inline void | |
| lpfc_bsg_event_ref(struct lpfc_bsg_event *evt) | |
| { | |
| kref_get(&evt->kref); | |
| } | |
| /** | |
| * lpfc_bsg_event_unref - Uses kref_put to free an event structure | |
| * @evt: Pointer to an event structure. | |
| **/ | |
| static inline void | |
| lpfc_bsg_event_unref(struct lpfc_bsg_event *evt) | |
| { | |
| kref_put(&evt->kref, lpfc_bsg_event_free); | |
| } | |
| /** | |
| * lpfc_bsg_event_new - allocate and initialize a event structure | |
| * @ev_mask: Mask of events. | |
| * @ev_reg_id: Event reg id. | |
| * @ev_req_id: Event request id. | |
| **/ | |
| static struct lpfc_bsg_event * | |
| lpfc_bsg_event_new(uint32_t ev_mask, int ev_reg_id, uint32_t ev_req_id) | |
| { | |
| struct lpfc_bsg_event *evt = kzalloc(sizeof(*evt), GFP_KERNEL); | |
| if (!evt) | |
| return NULL; | |
| INIT_LIST_HEAD(&evt->events_to_get); | |
| INIT_LIST_HEAD(&evt->events_to_see); | |
| evt->type_mask = ev_mask; | |
| evt->req_id = ev_req_id; | |
| evt->reg_id = ev_reg_id; | |
| evt->wait_time_stamp = jiffies; | |
| evt->dd_data = NULL; | |
| init_waitqueue_head(&evt->wq); | |
| kref_init(&evt->kref); | |
| return evt; | |
| } | |
| /** | |
| * diag_cmd_data_free - Frees an lpfc dma buffer extension | |
| * @phba: Pointer to HBA context object. | |
| * @mlist: Pointer to an lpfc dma buffer extension. | |
| **/ | |
| static int | |
| diag_cmd_data_free(struct lpfc_hba *phba, struct lpfc_dmabufext *mlist) | |
| { | |
| struct lpfc_dmabufext *mlast; | |
| struct pci_dev *pcidev; | |
| struct list_head head, *curr, *next; | |
| if ((!mlist) || (!lpfc_is_link_up(phba) && | |
| (phba->link_flag & LS_LOOPBACK_MODE))) { | |
| return 0; | |
| } | |
| pcidev = phba->pcidev; | |
| list_add_tail(&head, &mlist->dma.list); | |
| list_for_each_safe(curr, next, &head) { | |
| mlast = list_entry(curr, struct lpfc_dmabufext , dma.list); | |
| if (mlast->dma.virt) | |
| dma_free_coherent(&pcidev->dev, | |
| mlast->size, | |
| mlast->dma.virt, | |
| mlast->dma.phys); | |
| kfree(mlast); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * lpfc_bsg_ct_unsol_event - process an unsolicited CT command | |
| * @phba: | |
| * @pring: | |
| * @piocbq: | |
| * | |
| * This function is called when an unsolicited CT command is received. It | |
| * forwards the event to any processes registered to receive CT events. | |
| **/ | |
| int | |
| lpfc_bsg_ct_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, | |
| struct lpfc_iocbq *piocbq) | |
| { | |
| uint32_t evt_req_id = 0; | |
| uint32_t cmd; | |
| uint32_t len; | |
| struct lpfc_dmabuf *dmabuf = NULL; | |
| struct lpfc_bsg_event *evt; | |
| struct event_data *evt_dat = NULL; | |
| struct lpfc_iocbq *iocbq; | |
| size_t offset = 0; | |
| struct list_head head; | |
| struct ulp_bde64 *bde; | |
| dma_addr_t dma_addr; | |
| int i; | |
| struct lpfc_dmabuf *bdeBuf1 = piocbq->context2; | |
| struct lpfc_dmabuf *bdeBuf2 = piocbq->context3; | |
| struct lpfc_hbq_entry *hbqe; | |
| struct lpfc_sli_ct_request *ct_req; | |
| struct fc_bsg_job *job = NULL; | |
| struct bsg_job_data *dd_data = NULL; | |
| unsigned long flags; | |
| int size = 0; | |
| INIT_LIST_HEAD(&head); | |
| list_add_tail(&head, &piocbq->list); | |
| if (piocbq->iocb.ulpBdeCount == 0 || | |
| piocbq->iocb.un.cont64[0].tus.f.bdeSize == 0) | |
| goto error_ct_unsol_exit; | |
| if (phba->link_state == LPFC_HBA_ERROR || | |
| (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE))) | |
| goto error_ct_unsol_exit; | |
| if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) | |
| dmabuf = bdeBuf1; | |
| else { | |
| dma_addr = getPaddr(piocbq->iocb.un.cont64[0].addrHigh, | |
| piocbq->iocb.un.cont64[0].addrLow); | |
| dmabuf = lpfc_sli_ringpostbuf_get(phba, pring, dma_addr); | |
| } | |
| if (dmabuf == NULL) | |
| goto error_ct_unsol_exit; | |
| ct_req = (struct lpfc_sli_ct_request *)dmabuf->virt; | |
| evt_req_id = ct_req->FsType; | |
| cmd = ct_req->CommandResponse.bits.CmdRsp; | |
| len = ct_req->CommandResponse.bits.Size; | |
| if (!(phba->sli3_options & LPFC_SLI3_HBQ_ENABLED)) | |
| lpfc_sli_ringpostbuf_put(phba, pring, dmabuf); | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| list_for_each_entry(evt, &phba->ct_ev_waiters, node) { | |
| if (!(evt->type_mask & FC_REG_CT_EVENT) || | |
| evt->req_id != evt_req_id) | |
| continue; | |
| lpfc_bsg_event_ref(evt); | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| evt_dat = kzalloc(sizeof(*evt_dat), GFP_KERNEL); | |
| if (evt_dat == NULL) { | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| lpfc_bsg_event_unref(evt); | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2614 Memory allocation failed for " | |
| "CT event\n"); | |
| break; | |
| } | |
| if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) { | |
| /* take accumulated byte count from the last iocbq */ | |
| iocbq = list_entry(head.prev, typeof(*iocbq), list); | |
| evt_dat->len = iocbq->iocb.unsli3.rcvsli3.acc_len; | |
| } else { | |
| list_for_each_entry(iocbq, &head, list) { | |
| for (i = 0; i < iocbq->iocb.ulpBdeCount; i++) | |
| evt_dat->len += | |
| iocbq->iocb.un.cont64[i].tus.f.bdeSize; | |
| } | |
| } | |
| evt_dat->data = kzalloc(evt_dat->len, GFP_KERNEL); | |
| if (evt_dat->data == NULL) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2615 Memory allocation failed for " | |
| "CT event data, size %d\n", | |
| evt_dat->len); | |
| kfree(evt_dat); | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| lpfc_bsg_event_unref(evt); | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| goto error_ct_unsol_exit; | |
| } | |
| list_for_each_entry(iocbq, &head, list) { | |
| size = 0; | |
| if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) { | |
| bdeBuf1 = iocbq->context2; | |
| bdeBuf2 = iocbq->context3; | |
| } | |
| for (i = 0; i < iocbq->iocb.ulpBdeCount; i++) { | |
| if (phba->sli3_options & | |
| LPFC_SLI3_HBQ_ENABLED) { | |
| if (i == 0) { | |
| hbqe = (struct lpfc_hbq_entry *) | |
| &iocbq->iocb.un.ulpWord[0]; | |
| size = hbqe->bde.tus.f.bdeSize; | |
| dmabuf = bdeBuf1; | |
| } else if (i == 1) { | |
| hbqe = (struct lpfc_hbq_entry *) | |
| &iocbq->iocb.unsli3. | |
| sli3Words[4]; | |
| size = hbqe->bde.tus.f.bdeSize; | |
| dmabuf = bdeBuf2; | |
| } | |
| if ((offset + size) > evt_dat->len) | |
| size = evt_dat->len - offset; | |
| } else { | |
| size = iocbq->iocb.un.cont64[i]. | |
| tus.f.bdeSize; | |
| bde = &iocbq->iocb.un.cont64[i]; | |
| dma_addr = getPaddr(bde->addrHigh, | |
| bde->addrLow); | |
| dmabuf = lpfc_sli_ringpostbuf_get(phba, | |
| pring, dma_addr); | |
| } | |
| if (!dmabuf) { | |
| lpfc_printf_log(phba, KERN_ERR, | |
| LOG_LIBDFC, "2616 No dmabuf " | |
| "found for iocbq 0x%p\n", | |
| iocbq); | |
| kfree(evt_dat->data); | |
| kfree(evt_dat); | |
| spin_lock_irqsave(&phba->ct_ev_lock, | |
| flags); | |
| lpfc_bsg_event_unref(evt); | |
| spin_unlock_irqrestore( | |
| &phba->ct_ev_lock, flags); | |
| goto error_ct_unsol_exit; | |
| } | |
| memcpy((char *)(evt_dat->data) + offset, | |
| dmabuf->virt, size); | |
| offset += size; | |
| if (evt_req_id != SLI_CT_ELX_LOOPBACK && | |
| !(phba->sli3_options & | |
| LPFC_SLI3_HBQ_ENABLED)) { | |
| lpfc_sli_ringpostbuf_put(phba, pring, | |
| dmabuf); | |
| } else { | |
| switch (cmd) { | |
| case ELX_LOOPBACK_DATA: | |
| if (phba->sli_rev < | |
| LPFC_SLI_REV4) | |
| diag_cmd_data_free(phba, | |
| (struct lpfc_dmabufext | |
| *)dmabuf); | |
| break; | |
| case ELX_LOOPBACK_XRI_SETUP: | |
| if ((phba->sli_rev == | |
| LPFC_SLI_REV2) || | |
| (phba->sli3_options & | |
| LPFC_SLI3_HBQ_ENABLED | |
| )) { | |
| lpfc_in_buf_free(phba, | |
| dmabuf); | |
| } else { | |
| lpfc_post_buffer(phba, | |
| pring, | |
| 1); | |
| } | |
| break; | |
| default: | |
| if (!(phba->sli3_options & | |
| LPFC_SLI3_HBQ_ENABLED)) | |
| lpfc_post_buffer(phba, | |
| pring, | |
| 1); | |
| break; | |
| } | |
| } | |
| } | |
| } | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| if (phba->sli_rev == LPFC_SLI_REV4) { | |
| evt_dat->immed_dat = phba->ctx_idx; | |
| phba->ctx_idx = (phba->ctx_idx + 1) % LPFC_CT_CTX_MAX; | |
| /* Provide warning for over-run of the ct_ctx array */ | |
| if (phba->ct_ctx[evt_dat->immed_dat].valid == | |
| UNSOL_VALID) | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_ELS, | |
| "2717 CT context array entry " | |
| "[%d] over-run: oxid:x%x, " | |
| "sid:x%x\n", phba->ctx_idx, | |
| phba->ct_ctx[ | |
| evt_dat->immed_dat].oxid, | |
| phba->ct_ctx[ | |
| evt_dat->immed_dat].SID); | |
| phba->ct_ctx[evt_dat->immed_dat].rxid = | |
| piocbq->iocb.ulpContext; | |
| phba->ct_ctx[evt_dat->immed_dat].oxid = | |
| piocbq->iocb.unsli3.rcvsli3.ox_id; | |
| phba->ct_ctx[evt_dat->immed_dat].SID = | |
| piocbq->iocb.un.rcvels.remoteID; | |
| phba->ct_ctx[evt_dat->immed_dat].valid = UNSOL_VALID; | |
| } else | |
| evt_dat->immed_dat = piocbq->iocb.ulpContext; | |
| evt_dat->type = FC_REG_CT_EVENT; | |
| list_add(&evt_dat->node, &evt->events_to_see); | |
| if (evt_req_id == SLI_CT_ELX_LOOPBACK) { | |
| wake_up_interruptible(&evt->wq); | |
| lpfc_bsg_event_unref(evt); | |
| break; | |
| } | |
| list_move(evt->events_to_see.prev, &evt->events_to_get); | |
| dd_data = (struct bsg_job_data *)evt->dd_data; | |
| job = dd_data->set_job; | |
| dd_data->set_job = NULL; | |
| lpfc_bsg_event_unref(evt); | |
| if (job) { | |
| job->reply->reply_payload_rcv_len = size; | |
| /* make error code available to userspace */ | |
| job->reply->result = 0; | |
| job->dd_data = NULL; | |
| /* complete the job back to userspace */ | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| job->job_done(job); | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| } | |
| } | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| error_ct_unsol_exit: | |
| if (!list_empty(&head)) | |
| list_del(&head); | |
| if ((phba->sli_rev < LPFC_SLI_REV4) && | |
| (evt_req_id == SLI_CT_ELX_LOOPBACK)) | |
| return 0; | |
| return 1; | |
| } | |
| /** | |
| * lpfc_bsg_ct_unsol_abort - handler ct abort to management plane | |
| * @phba: Pointer to HBA context object. | |
| * @dmabuf: pointer to a dmabuf that describes the FC sequence | |
| * | |
| * This function handles abort to the CT command toward management plane | |
| * for SLI4 port. | |
| * | |
| * If the pending context of a CT command to management plane present, clears | |
| * such context and returns 1 for handled; otherwise, it returns 0 indicating | |
| * no context exists. | |
| **/ | |
| int | |
| lpfc_bsg_ct_unsol_abort(struct lpfc_hba *phba, struct hbq_dmabuf *dmabuf) | |
| { | |
| struct fc_frame_header fc_hdr; | |
| struct fc_frame_header *fc_hdr_ptr = &fc_hdr; | |
| int ctx_idx, handled = 0; | |
| uint16_t oxid, rxid; | |
| uint32_t sid; | |
| memcpy(fc_hdr_ptr, dmabuf->hbuf.virt, sizeof(struct fc_frame_header)); | |
| sid = sli4_sid_from_fc_hdr(fc_hdr_ptr); | |
| oxid = be16_to_cpu(fc_hdr_ptr->fh_ox_id); | |
| rxid = be16_to_cpu(fc_hdr_ptr->fh_rx_id); | |
| for (ctx_idx = 0; ctx_idx < LPFC_CT_CTX_MAX; ctx_idx++) { | |
| if (phba->ct_ctx[ctx_idx].valid != UNSOL_VALID) | |
| continue; | |
| if (phba->ct_ctx[ctx_idx].rxid != rxid) | |
| continue; | |
| if (phba->ct_ctx[ctx_idx].oxid != oxid) | |
| continue; | |
| if (phba->ct_ctx[ctx_idx].SID != sid) | |
| continue; | |
| phba->ct_ctx[ctx_idx].valid = UNSOL_INVALID; | |
| handled = 1; | |
| } | |
| return handled; | |
| } | |
| /** | |
| * lpfc_bsg_hba_set_event - process a SET_EVENT bsg vendor command | |
| * @job: SET_EVENT fc_bsg_job | |
| **/ | |
| static int | |
| lpfc_bsg_hba_set_event(struct fc_bsg_job *job) | |
| { | |
| struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; | |
| struct lpfc_hba *phba = vport->phba; | |
| struct set_ct_event *event_req; | |
| struct lpfc_bsg_event *evt; | |
| int rc = 0; | |
| struct bsg_job_data *dd_data = NULL; | |
| uint32_t ev_mask; | |
| unsigned long flags; | |
| if (job->request_len < | |
| sizeof(struct fc_bsg_request) + sizeof(struct set_ct_event)) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2612 Received SET_CT_EVENT below minimum " | |
| "size\n"); | |
| rc = -EINVAL; | |
| goto job_error; | |
| } | |
| event_req = (struct set_ct_event *) | |
| job->request->rqst_data.h_vendor.vendor_cmd; | |
| ev_mask = ((uint32_t)(unsigned long)event_req->type_mask & | |
| FC_REG_EVENT_MASK); | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| list_for_each_entry(evt, &phba->ct_ev_waiters, node) { | |
| if (evt->reg_id == event_req->ev_reg_id) { | |
| lpfc_bsg_event_ref(evt); | |
| evt->wait_time_stamp = jiffies; | |
| dd_data = (struct bsg_job_data *)evt->dd_data; | |
| break; | |
| } | |
| } | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| if (&evt->node == &phba->ct_ev_waiters) { | |
| /* no event waiting struct yet - first call */ | |
| dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); | |
| if (dd_data == NULL) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2734 Failed allocation of dd_data\n"); | |
| rc = -ENOMEM; | |
| goto job_error; | |
| } | |
| evt = lpfc_bsg_event_new(ev_mask, event_req->ev_reg_id, | |
| event_req->ev_req_id); | |
| if (!evt) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2617 Failed allocation of event " | |
| "waiter\n"); | |
| rc = -ENOMEM; | |
| goto job_error; | |
| } | |
| dd_data->type = TYPE_EVT; | |
| dd_data->set_job = NULL; | |
| dd_data->context_un.evt = evt; | |
| evt->dd_data = (void *)dd_data; | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| list_add(&evt->node, &phba->ct_ev_waiters); | |
| lpfc_bsg_event_ref(evt); | |
| evt->wait_time_stamp = jiffies; | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| } | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| evt->waiting = 1; | |
| dd_data->set_job = job; /* for unsolicited command */ | |
| job->dd_data = dd_data; /* for fc transport timeout callback*/ | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| return 0; /* call job done later */ | |
| job_error: | |
| if (dd_data != NULL) | |
| kfree(dd_data); | |
| job->dd_data = NULL; | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_hba_get_event - process a GET_EVENT bsg vendor command | |
| * @job: GET_EVENT fc_bsg_job | |
| **/ | |
| static int | |
| lpfc_bsg_hba_get_event(struct fc_bsg_job *job) | |
| { | |
| struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; | |
| struct lpfc_hba *phba = vport->phba; | |
| struct get_ct_event *event_req; | |
| struct get_ct_event_reply *event_reply; | |
| struct lpfc_bsg_event *evt, *evt_next; | |
| struct event_data *evt_dat = NULL; | |
| unsigned long flags; | |
| uint32_t rc = 0; | |
| if (job->request_len < | |
| sizeof(struct fc_bsg_request) + sizeof(struct get_ct_event)) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2613 Received GET_CT_EVENT request below " | |
| "minimum size\n"); | |
| rc = -EINVAL; | |
| goto job_error; | |
| } | |
| event_req = (struct get_ct_event *) | |
| job->request->rqst_data.h_vendor.vendor_cmd; | |
| event_reply = (struct get_ct_event_reply *) | |
| job->reply->reply_data.vendor_reply.vendor_rsp; | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| list_for_each_entry_safe(evt, evt_next, &phba->ct_ev_waiters, node) { | |
| if (evt->reg_id == event_req->ev_reg_id) { | |
| if (list_empty(&evt->events_to_get)) | |
| break; | |
| lpfc_bsg_event_ref(evt); | |
| evt->wait_time_stamp = jiffies; | |
| evt_dat = list_entry(evt->events_to_get.prev, | |
| struct event_data, node); | |
| list_del(&evt_dat->node); | |
| break; | |
| } | |
| } | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| /* The app may continue to ask for event data until it gets | |
| * an error indicating that there isn't anymore | |
| */ | |
| if (evt_dat == NULL) { | |
| job->reply->reply_payload_rcv_len = 0; | |
| rc = -ENOENT; | |
| goto job_error; | |
| } | |
| if (evt_dat->len > job->request_payload.payload_len) { | |
| evt_dat->len = job->request_payload.payload_len; | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2618 Truncated event data at %d " | |
| "bytes\n", | |
| job->request_payload.payload_len); | |
| } | |
| event_reply->type = evt_dat->type; | |
| event_reply->immed_data = evt_dat->immed_dat; | |
| if (evt_dat->len > 0) | |
| job->reply->reply_payload_rcv_len = | |
| sg_copy_from_buffer(job->request_payload.sg_list, | |
| job->request_payload.sg_cnt, | |
| evt_dat->data, evt_dat->len); | |
| else | |
| job->reply->reply_payload_rcv_len = 0; | |
| if (evt_dat) { | |
| kfree(evt_dat->data); | |
| kfree(evt_dat); | |
| } | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| lpfc_bsg_event_unref(evt); | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| job->dd_data = NULL; | |
| job->reply->result = 0; | |
| job->job_done(job); | |
| return 0; | |
| job_error: | |
| job->dd_data = NULL; | |
| job->reply->result = rc; | |
| return rc; | |
| } | |
| /** | |
| * lpfc_issue_ct_rsp_cmp - lpfc_issue_ct_rsp's completion handler | |
| * @phba: Pointer to HBA context object. | |
| * @cmdiocbq: Pointer to command iocb. | |
| * @rspiocbq: Pointer to response iocb. | |
| * | |
| * This function is the completion handler for iocbs issued using | |
| * lpfc_issue_ct_rsp_cmp function. This function is called by the | |
| * ring event handler function without any lock held. This function | |
| * can be called from both worker thread context and interrupt | |
| * context. This function also can be called from other thread which | |
| * cleans up the SLI layer objects. | |
| * This function copy the contents of the response iocb to the | |
| * response iocb memory object provided by the caller of | |
| * lpfc_sli_issue_iocb_wait and then wakes up the thread which | |
| * sleeps for the iocb completion. | |
| **/ | |
| static void | |
| lpfc_issue_ct_rsp_cmp(struct lpfc_hba *phba, | |
| struct lpfc_iocbq *cmdiocbq, | |
| struct lpfc_iocbq *rspiocbq) | |
| { | |
| struct bsg_job_data *dd_data; | |
| struct fc_bsg_job *job; | |
| IOCB_t *rsp; | |
| struct lpfc_dmabuf *bmp, *cmp; | |
| struct lpfc_nodelist *ndlp; | |
| unsigned long flags; | |
| int rc = 0; | |
| dd_data = cmdiocbq->context1; | |
| /* Determine if job has been aborted */ | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| job = dd_data->set_job; | |
| if (job) { | |
| /* Prevent timeout handling from trying to abort job */ | |
| job->dd_data = NULL; | |
| } | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| /* Close the timeout handler abort window */ | |
| spin_lock_irqsave(&phba->hbalock, flags); | |
| cmdiocbq->iocb_flag &= ~LPFC_IO_CMD_OUTSTANDING; | |
| spin_unlock_irqrestore(&phba->hbalock, flags); | |
| ndlp = dd_data->context_un.iocb.ndlp; | |
| cmp = cmdiocbq->context2; | |
| bmp = cmdiocbq->context3; | |
| rsp = &rspiocbq->iocb; | |
| /* Copy the completed job data or set the error status */ | |
| if (job) { | |
| if (rsp->ulpStatus) { | |
| if (rsp->ulpStatus == IOSTAT_LOCAL_REJECT) { | |
| switch (rsp->un.ulpWord[4] & IOERR_PARAM_MASK) { | |
| case IOERR_SEQUENCE_TIMEOUT: | |
| rc = -ETIMEDOUT; | |
| break; | |
| case IOERR_INVALID_RPI: | |
| rc = -EFAULT; | |
| break; | |
| default: | |
| rc = -EACCES; | |
| break; | |
| } | |
| } else { | |
| rc = -EACCES; | |
| } | |
| } else { | |
| job->reply->reply_payload_rcv_len = 0; | |
| } | |
| } | |
| lpfc_free_bsg_buffers(phba, cmp); | |
| lpfc_mbuf_free(phba, bmp->virt, bmp->phys); | |
| kfree(bmp); | |
| lpfc_sli_release_iocbq(phba, cmdiocbq); | |
| lpfc_nlp_put(ndlp); | |
| kfree(dd_data); | |
| /* Complete the job if the job is still active */ | |
| if (job) { | |
| job->reply->result = rc; | |
| job->job_done(job); | |
| } | |
| return; | |
| } | |
| /** | |
| * lpfc_issue_ct_rsp - issue a ct response | |
| * @phba: Pointer to HBA context object. | |
| * @job: Pointer to the job object. | |
| * @tag: tag index value into the ports context exchange array. | |
| * @bmp: Pointer to a dma buffer descriptor. | |
| * @num_entry: Number of enties in the bde. | |
| **/ | |
| static int | |
| lpfc_issue_ct_rsp(struct lpfc_hba *phba, struct fc_bsg_job *job, uint32_t tag, | |
| struct lpfc_dmabuf *cmp, struct lpfc_dmabuf *bmp, | |
| int num_entry) | |
| { | |
| IOCB_t *icmd; | |
| struct lpfc_iocbq *ctiocb = NULL; | |
| int rc = 0; | |
| struct lpfc_nodelist *ndlp = NULL; | |
| struct bsg_job_data *dd_data; | |
| unsigned long flags; | |
| uint32_t creg_val; | |
| /* allocate our bsg tracking structure */ | |
| dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); | |
| if (!dd_data) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2736 Failed allocation of dd_data\n"); | |
| rc = -ENOMEM; | |
| goto no_dd_data; | |
| } | |
| /* Allocate buffer for command iocb */ | |
| ctiocb = lpfc_sli_get_iocbq(phba); | |
| if (!ctiocb) { | |
| rc = -ENOMEM; | |
| goto no_ctiocb; | |
| } | |
| icmd = &ctiocb->iocb; | |
| icmd->un.xseq64.bdl.ulpIoTag32 = 0; | |
| icmd->un.xseq64.bdl.addrHigh = putPaddrHigh(bmp->phys); | |
| icmd->un.xseq64.bdl.addrLow = putPaddrLow(bmp->phys); | |
| icmd->un.xseq64.bdl.bdeFlags = BUFF_TYPE_BLP_64; | |
| icmd->un.xseq64.bdl.bdeSize = (num_entry * sizeof(struct ulp_bde64)); | |
| icmd->un.xseq64.w5.hcsw.Fctl = (LS | LA); | |
| icmd->un.xseq64.w5.hcsw.Dfctl = 0; | |
| icmd->un.xseq64.w5.hcsw.Rctl = FC_RCTL_DD_SOL_CTL; | |
| icmd->un.xseq64.w5.hcsw.Type = FC_TYPE_CT; | |
| /* Fill in rest of iocb */ | |
| icmd->ulpCommand = CMD_XMIT_SEQUENCE64_CX; | |
| icmd->ulpBdeCount = 1; | |
| icmd->ulpLe = 1; | |
| icmd->ulpClass = CLASS3; | |
| if (phba->sli_rev == LPFC_SLI_REV4) { | |
| /* Do not issue unsol response if oxid not marked as valid */ | |
| if (phba->ct_ctx[tag].valid != UNSOL_VALID) { | |
| rc = IOCB_ERROR; | |
| goto issue_ct_rsp_exit; | |
| } | |
| icmd->ulpContext = phba->ct_ctx[tag].rxid; | |
| icmd->unsli3.rcvsli3.ox_id = phba->ct_ctx[tag].oxid; | |
| ndlp = lpfc_findnode_did(phba->pport, phba->ct_ctx[tag].SID); | |
| if (!ndlp) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_ELS, | |
| "2721 ndlp null for oxid %x SID %x\n", | |
| icmd->ulpContext, | |
| phba->ct_ctx[tag].SID); | |
| rc = IOCB_ERROR; | |
| goto issue_ct_rsp_exit; | |
| } | |
| /* Check if the ndlp is active */ | |
| if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) { | |
| rc = IOCB_ERROR; | |
| goto issue_ct_rsp_exit; | |
| } | |
| /* get a refernece count so the ndlp doesn't go away while | |
| * we respond | |
| */ | |
| if (!lpfc_nlp_get(ndlp)) { | |
| rc = IOCB_ERROR; | |
| goto issue_ct_rsp_exit; | |
| } | |
| icmd->un.ulpWord[3] = | |
| phba->sli4_hba.rpi_ids[ndlp->nlp_rpi]; | |
| /* The exchange is done, mark the entry as invalid */ | |
| phba->ct_ctx[tag].valid = UNSOL_INVALID; | |
| } else | |
| icmd->ulpContext = (ushort) tag; | |
| icmd->ulpTimeout = phba->fc_ratov * 2; | |
| /* Xmit CT response on exchange <xid> */ | |
| lpfc_printf_log(phba, KERN_INFO, LOG_ELS, | |
| "2722 Xmit CT response on exchange x%x Data: x%x x%x x%x\n", | |
| icmd->ulpContext, icmd->ulpIoTag, tag, phba->link_state); | |
| ctiocb->iocb_cmpl = NULL; | |
| ctiocb->iocb_flag |= LPFC_IO_LIBDFC; | |
| ctiocb->vport = phba->pport; | |
| ctiocb->context1 = dd_data; | |
| ctiocb->context2 = cmp; | |
| ctiocb->context3 = bmp; | |
| ctiocb->context_un.ndlp = ndlp; | |
| ctiocb->iocb_cmpl = lpfc_issue_ct_rsp_cmp; | |
| dd_data->type = TYPE_IOCB; | |
| dd_data->set_job = job; | |
| dd_data->context_un.iocb.cmdiocbq = ctiocb; | |
| dd_data->context_un.iocb.ndlp = ndlp; | |
| dd_data->context_un.iocb.rmp = NULL; | |
| job->dd_data = dd_data; | |
| if (phba->cfg_poll & DISABLE_FCP_RING_INT) { | |
| if (lpfc_readl(phba->HCregaddr, &creg_val)) { | |
| rc = -IOCB_ERROR; | |
| goto issue_ct_rsp_exit; | |
| } | |
| creg_val |= (HC_R0INT_ENA << LPFC_FCP_RING); | |
| writel(creg_val, phba->HCregaddr); | |
| readl(phba->HCregaddr); /* flush */ | |
| } | |
| rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, ctiocb, 0); | |
| if (rc == IOCB_SUCCESS) { | |
| spin_lock_irqsave(&phba->hbalock, flags); | |
| /* make sure the I/O had not been completed/released */ | |
| if (ctiocb->iocb_flag & LPFC_IO_LIBDFC) { | |
| /* open up abort window to timeout handler */ | |
| ctiocb->iocb_flag |= LPFC_IO_CMD_OUTSTANDING; | |
| } | |
| spin_unlock_irqrestore(&phba->hbalock, flags); | |
| return 0; /* done for now */ | |
| } | |
| /* iocb failed so cleanup */ | |
| job->dd_data = NULL; | |
| issue_ct_rsp_exit: | |
| lpfc_sli_release_iocbq(phba, ctiocb); | |
| no_ctiocb: | |
| kfree(dd_data); | |
| no_dd_data: | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_send_mgmt_rsp - process a SEND_MGMT_RESP bsg vendor command | |
| * @job: SEND_MGMT_RESP fc_bsg_job | |
| **/ | |
| static int | |
| lpfc_bsg_send_mgmt_rsp(struct fc_bsg_job *job) | |
| { | |
| struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; | |
| struct lpfc_hba *phba = vport->phba; | |
| struct send_mgmt_resp *mgmt_resp = (struct send_mgmt_resp *) | |
| job->request->rqst_data.h_vendor.vendor_cmd; | |
| struct ulp_bde64 *bpl; | |
| struct lpfc_dmabuf *bmp = NULL, *cmp = NULL; | |
| int bpl_entries; | |
| uint32_t tag = mgmt_resp->tag; | |
| unsigned long reqbfrcnt = | |
| (unsigned long)job->request_payload.payload_len; | |
| int rc = 0; | |
| /* in case no data is transferred */ | |
| job->reply->reply_payload_rcv_len = 0; | |
| if (!reqbfrcnt || (reqbfrcnt > (80 * BUF_SZ_4K))) { | |
| rc = -ERANGE; | |
| goto send_mgmt_rsp_exit; | |
| } | |
| bmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); | |
| if (!bmp) { | |
| rc = -ENOMEM; | |
| goto send_mgmt_rsp_exit; | |
| } | |
| bmp->virt = lpfc_mbuf_alloc(phba, 0, &bmp->phys); | |
| if (!bmp->virt) { | |
| rc = -ENOMEM; | |
| goto send_mgmt_rsp_free_bmp; | |
| } | |
| INIT_LIST_HEAD(&bmp->list); | |
| bpl = (struct ulp_bde64 *) bmp->virt; | |
| bpl_entries = (LPFC_BPL_SIZE/sizeof(struct ulp_bde64)); | |
| cmp = lpfc_alloc_bsg_buffers(phba, job->request_payload.payload_len, | |
| 1, bpl, &bpl_entries); | |
| if (!cmp) { | |
| rc = -ENOMEM; | |
| goto send_mgmt_rsp_free_bmp; | |
| } | |
| lpfc_bsg_copy_data(cmp, &job->request_payload, | |
| job->request_payload.payload_len, 1); | |
| rc = lpfc_issue_ct_rsp(phba, job, tag, cmp, bmp, bpl_entries); | |
| if (rc == IOCB_SUCCESS) | |
| return 0; /* done for now */ | |
| rc = -EACCES; | |
| lpfc_free_bsg_buffers(phba, cmp); | |
| send_mgmt_rsp_free_bmp: | |
| if (bmp->virt) | |
| lpfc_mbuf_free(phba, bmp->virt, bmp->phys); | |
| kfree(bmp); | |
| send_mgmt_rsp_exit: | |
| /* make error code available to userspace */ | |
| job->reply->result = rc; | |
| job->dd_data = NULL; | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_diag_mode_enter - process preparing into device diag loopback mode | |
| * @phba: Pointer to HBA context object. | |
| * | |
| * This function is responsible for preparing driver for diag loopback | |
| * on device. | |
| */ | |
| static int | |
| lpfc_bsg_diag_mode_enter(struct lpfc_hba *phba) | |
| { | |
| struct lpfc_vport **vports; | |
| struct Scsi_Host *shost; | |
| struct lpfc_sli *psli; | |
| struct lpfc_sli_ring *pring; | |
| int i = 0; | |
| psli = &phba->sli; | |
| if (!psli) | |
| return -ENODEV; | |
| pring = &psli->ring[LPFC_FCP_RING]; | |
| if (!pring) | |
| return -ENODEV; | |
| if ((phba->link_state == LPFC_HBA_ERROR) || | |
| (psli->sli_flag & LPFC_BLOCK_MGMT_IO) || | |
| (!(psli->sli_flag & LPFC_SLI_ACTIVE))) | |
| return -EACCES; | |
| vports = lpfc_create_vport_work_array(phba); | |
| if (vports) { | |
| for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { | |
| shost = lpfc_shost_from_vport(vports[i]); | |
| scsi_block_requests(shost); | |
| } | |
| lpfc_destroy_vport_work_array(phba, vports); | |
| } else { | |
| shost = lpfc_shost_from_vport(phba->pport); | |
| scsi_block_requests(shost); | |
| } | |
| while (!list_empty(&pring->txcmplq)) { | |
| if (i++ > 500) /* wait up to 5 seconds */ | |
| break; | |
| msleep(10); | |
| } | |
| return 0; | |
| } | |
| /** | |
| * lpfc_bsg_diag_mode_exit - exit process from device diag loopback mode | |
| * @phba: Pointer to HBA context object. | |
| * | |
| * This function is responsible for driver exit processing of setting up | |
| * diag loopback mode on device. | |
| */ | |
| static void | |
| lpfc_bsg_diag_mode_exit(struct lpfc_hba *phba) | |
| { | |
| struct Scsi_Host *shost; | |
| struct lpfc_vport **vports; | |
| int i; | |
| vports = lpfc_create_vport_work_array(phba); | |
| if (vports) { | |
| for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) { | |
| shost = lpfc_shost_from_vport(vports[i]); | |
| scsi_unblock_requests(shost); | |
| } | |
| lpfc_destroy_vport_work_array(phba, vports); | |
| } else { | |
| shost = lpfc_shost_from_vport(phba->pport); | |
| scsi_unblock_requests(shost); | |
| } | |
| return; | |
| } | |
| /** | |
| * lpfc_sli3_bsg_diag_loopback_mode - process an sli3 bsg vendor command | |
| * @phba: Pointer to HBA context object. | |
| * @job: LPFC_BSG_VENDOR_DIAG_MODE | |
| * | |
| * This function is responsible for placing an sli3 port into diagnostic | |
| * loopback mode in order to perform a diagnostic loopback test. | |
| * All new scsi requests are blocked, a small delay is used to allow the | |
| * scsi requests to complete then the link is brought down. If the link is | |
| * is placed in loopback mode then scsi requests are again allowed | |
| * so the scsi mid-layer doesn't give up on the port. | |
| * All of this is done in-line. | |
| */ | |
| static int | |
| lpfc_sli3_bsg_diag_loopback_mode(struct lpfc_hba *phba, struct fc_bsg_job *job) | |
| { | |
| struct diag_mode_set *loopback_mode; | |
| uint32_t link_flags; | |
| uint32_t timeout; | |
| LPFC_MBOXQ_t *pmboxq = NULL; | |
| int mbxstatus = MBX_SUCCESS; | |
| int i = 0; | |
| int rc = 0; | |
| /* no data to return just the return code */ | |
| job->reply->reply_payload_rcv_len = 0; | |
| if (job->request_len < sizeof(struct fc_bsg_request) + | |
| sizeof(struct diag_mode_set)) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2738 Received DIAG MODE request size:%d " | |
| "below the minimum size:%d\n", | |
| job->request_len, | |
| (int)(sizeof(struct fc_bsg_request) + | |
| sizeof(struct diag_mode_set))); | |
| rc = -EINVAL; | |
| goto job_error; | |
| } | |
| rc = lpfc_bsg_diag_mode_enter(phba); | |
| if (rc) | |
| goto job_error; | |
| /* bring the link to diagnostic mode */ | |
| loopback_mode = (struct diag_mode_set *) | |
| job->request->rqst_data.h_vendor.vendor_cmd; | |
| link_flags = loopback_mode->type; | |
| timeout = loopback_mode->timeout * 100; | |
| pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | |
| if (!pmboxq) { | |
| rc = -ENOMEM; | |
| goto loopback_mode_exit; | |
| } | |
| memset((void *)pmboxq, 0, sizeof(LPFC_MBOXQ_t)); | |
| pmboxq->u.mb.mbxCommand = MBX_DOWN_LINK; | |
| pmboxq->u.mb.mbxOwner = OWN_HOST; | |
| mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO); | |
| if ((mbxstatus == MBX_SUCCESS) && (pmboxq->u.mb.mbxStatus == 0)) { | |
| /* wait for link down before proceeding */ | |
| i = 0; | |
| while (phba->link_state != LPFC_LINK_DOWN) { | |
| if (i++ > timeout) { | |
| rc = -ETIMEDOUT; | |
| goto loopback_mode_exit; | |
| } | |
| msleep(10); | |
| } | |
| memset((void *)pmboxq, 0, sizeof(LPFC_MBOXQ_t)); | |
| if (link_flags == INTERNAL_LOOP_BACK) | |
| pmboxq->u.mb.un.varInitLnk.link_flags = FLAGS_LOCAL_LB; | |
| else | |
| pmboxq->u.mb.un.varInitLnk.link_flags = | |
| FLAGS_TOPOLOGY_MODE_LOOP; | |
| pmboxq->u.mb.mbxCommand = MBX_INIT_LINK; | |
| pmboxq->u.mb.mbxOwner = OWN_HOST; | |
| mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, | |
| LPFC_MBOX_TMO); | |
| if ((mbxstatus != MBX_SUCCESS) || (pmboxq->u.mb.mbxStatus)) | |
| rc = -ENODEV; | |
| else { | |
| spin_lock_irq(&phba->hbalock); | |
| phba->link_flag |= LS_LOOPBACK_MODE; | |
| spin_unlock_irq(&phba->hbalock); | |
| /* wait for the link attention interrupt */ | |
| msleep(100); | |
| i = 0; | |
| while (phba->link_state != LPFC_HBA_READY) { | |
| if (i++ > timeout) { | |
| rc = -ETIMEDOUT; | |
| break; | |
| } | |
| msleep(10); | |
| } | |
| } | |
| } else | |
| rc = -ENODEV; | |
| loopback_mode_exit: | |
| lpfc_bsg_diag_mode_exit(phba); | |
| /* | |
| * Let SLI layer release mboxq if mbox command completed after timeout. | |
| */ | |
| if (pmboxq && mbxstatus != MBX_TIMEOUT) | |
| mempool_free(pmboxq, phba->mbox_mem_pool); | |
| job_error: | |
| /* make error code available to userspace */ | |
| job->reply->result = rc; | |
| /* complete the job back to userspace if no error */ | |
| if (rc == 0) | |
| job->job_done(job); | |
| return rc; | |
| } | |
| /** | |
| * lpfc_sli4_bsg_set_link_diag_state - set sli4 link diag state | |
| * @phba: Pointer to HBA context object. | |
| * @diag: Flag for set link to diag or nomral operation state. | |
| * | |
| * This function is responsible for issuing a sli4 mailbox command for setting | |
| * link to either diag state or normal operation state. | |
| */ | |
| static int | |
| lpfc_sli4_bsg_set_link_diag_state(struct lpfc_hba *phba, uint32_t diag) | |
| { | |
| LPFC_MBOXQ_t *pmboxq; | |
| struct lpfc_mbx_set_link_diag_state *link_diag_state; | |
| uint32_t req_len, alloc_len; | |
| int mbxstatus = MBX_SUCCESS, rc; | |
| pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | |
| if (!pmboxq) | |
| return -ENOMEM; | |
| req_len = (sizeof(struct lpfc_mbx_set_link_diag_state) - | |
| sizeof(struct lpfc_sli4_cfg_mhdr)); | |
| alloc_len = lpfc_sli4_config(phba, pmboxq, LPFC_MBOX_SUBSYSTEM_FCOE, | |
| LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE, | |
| req_len, LPFC_SLI4_MBX_EMBED); | |
| if (alloc_len != req_len) { | |
| rc = -ENOMEM; | |
| goto link_diag_state_set_out; | |
| } | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "3128 Set link to diagnostic state:x%x (x%x/x%x)\n", | |
| diag, phba->sli4_hba.lnk_info.lnk_tp, | |
| phba->sli4_hba.lnk_info.lnk_no); | |
| link_diag_state = &pmboxq->u.mqe.un.link_diag_state; | |
| bf_set(lpfc_mbx_set_diag_state_diag_bit_valid, &link_diag_state->u.req, | |
| LPFC_DIAG_STATE_DIAG_BIT_VALID_CHANGE); | |
| bf_set(lpfc_mbx_set_diag_state_link_num, &link_diag_state->u.req, | |
| phba->sli4_hba.lnk_info.lnk_no); | |
| bf_set(lpfc_mbx_set_diag_state_link_type, &link_diag_state->u.req, | |
| phba->sli4_hba.lnk_info.lnk_tp); | |
| if (diag) | |
| bf_set(lpfc_mbx_set_diag_state_diag, | |
| &link_diag_state->u.req, 1); | |
| else | |
| bf_set(lpfc_mbx_set_diag_state_diag, | |
| &link_diag_state->u.req, 0); | |
| mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO); | |
| if ((mbxstatus == MBX_SUCCESS) && (pmboxq->u.mb.mbxStatus == 0)) | |
| rc = 0; | |
| else | |
| rc = -ENODEV; | |
| link_diag_state_set_out: | |
| if (pmboxq && (mbxstatus != MBX_TIMEOUT)) | |
| mempool_free(pmboxq, phba->mbox_mem_pool); | |
| return rc; | |
| } | |
| /** | |
| * lpfc_sli4_bsg_set_internal_loopback - set sli4 internal loopback diagnostic | |
| * @phba: Pointer to HBA context object. | |
| * | |
| * This function is responsible for issuing a sli4 mailbox command for setting | |
| * up internal loopback diagnostic. | |
| */ | |
| static int | |
| lpfc_sli4_bsg_set_internal_loopback(struct lpfc_hba *phba) | |
| { | |
| LPFC_MBOXQ_t *pmboxq; | |
| uint32_t req_len, alloc_len; | |
| struct lpfc_mbx_set_link_diag_loopback *link_diag_loopback; | |
| int mbxstatus = MBX_SUCCESS, rc = 0; | |
| pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | |
| if (!pmboxq) | |
| return -ENOMEM; | |
| req_len = (sizeof(struct lpfc_mbx_set_link_diag_loopback) - | |
| sizeof(struct lpfc_sli4_cfg_mhdr)); | |
| alloc_len = lpfc_sli4_config(phba, pmboxq, LPFC_MBOX_SUBSYSTEM_FCOE, | |
| LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_LOOPBACK, | |
| req_len, LPFC_SLI4_MBX_EMBED); | |
| if (alloc_len != req_len) { | |
| mempool_free(pmboxq, phba->mbox_mem_pool); | |
| return -ENOMEM; | |
| } | |
| link_diag_loopback = &pmboxq->u.mqe.un.link_diag_loopback; | |
| bf_set(lpfc_mbx_set_diag_state_link_num, | |
| &link_diag_loopback->u.req, phba->sli4_hba.lnk_info.lnk_no); | |
| bf_set(lpfc_mbx_set_diag_state_link_type, | |
| &link_diag_loopback->u.req, phba->sli4_hba.lnk_info.lnk_tp); | |
| bf_set(lpfc_mbx_set_diag_lpbk_type, &link_diag_loopback->u.req, | |
| LPFC_DIAG_LOOPBACK_TYPE_INTERNAL); | |
| mbxstatus = lpfc_sli_issue_mbox_wait(phba, pmboxq, LPFC_MBOX_TMO); | |
| if ((mbxstatus != MBX_SUCCESS) || (pmboxq->u.mb.mbxStatus)) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "3127 Failed setup loopback mode mailbox " | |
| "command, rc:x%x, status:x%x\n", mbxstatus, | |
| pmboxq->u.mb.mbxStatus); | |
| rc = -ENODEV; | |
| } | |
| if (pmboxq && (mbxstatus != MBX_TIMEOUT)) | |
| mempool_free(pmboxq, phba->mbox_mem_pool); | |
| return rc; | |
| } | |
| /** | |
| * lpfc_sli4_diag_fcport_reg_setup - setup port registrations for diagnostic | |
| * @phba: Pointer to HBA context object. | |
| * | |
| * This function set up SLI4 FC port registrations for diagnostic run, which | |
| * includes all the rpis, vfi, and also vpi. | |
| */ | |
| static int | |
| lpfc_sli4_diag_fcport_reg_setup(struct lpfc_hba *phba) | |
| { | |
| int rc; | |
| if (phba->pport->fc_flag & FC_VFI_REGISTERED) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "3136 Port still had vfi registered: " | |
| "mydid:x%x, fcfi:%d, vfi:%d, vpi:%d\n", | |
| phba->pport->fc_myDID, phba->fcf.fcfi, | |
| phba->sli4_hba.vfi_ids[phba->pport->vfi], | |
| phba->vpi_ids[phba->pport->vpi]); | |
| return -EINVAL; | |
| } | |
| rc = lpfc_issue_reg_vfi(phba->pport); | |
| return rc; | |
| } | |
| /** | |
| * lpfc_sli4_bsg_diag_loopback_mode - process an sli4 bsg vendor command | |
| * @phba: Pointer to HBA context object. | |
| * @job: LPFC_BSG_VENDOR_DIAG_MODE | |
| * | |
| * This function is responsible for placing an sli4 port into diagnostic | |
| * loopback mode in order to perform a diagnostic loopback test. | |
| */ | |
| static int | |
| lpfc_sli4_bsg_diag_loopback_mode(struct lpfc_hba *phba, struct fc_bsg_job *job) | |
| { | |
| struct diag_mode_set *loopback_mode; | |
| uint32_t link_flags, timeout; | |
| int i, rc = 0; | |
| /* no data to return just the return code */ | |
| job->reply->reply_payload_rcv_len = 0; | |
| if (job->request_len < sizeof(struct fc_bsg_request) + | |
| sizeof(struct diag_mode_set)) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "3011 Received DIAG MODE request size:%d " | |
| "below the minimum size:%d\n", | |
| job->request_len, | |
| (int)(sizeof(struct fc_bsg_request) + | |
| sizeof(struct diag_mode_set))); | |
| rc = -EINVAL; | |
| goto job_error; | |
| } | |
| rc = lpfc_bsg_diag_mode_enter(phba); | |
| if (rc) | |
| goto job_error; | |
| /* indicate we are in loobpack diagnostic mode */ | |
| spin_lock_irq(&phba->hbalock); | |
| phba->link_flag |= LS_LOOPBACK_MODE; | |
| spin_unlock_irq(&phba->hbalock); | |
| /* reset port to start frome scratch */ | |
| rc = lpfc_selective_reset(phba); | |
| if (rc) | |
| goto job_error; | |
| /* bring the link to diagnostic mode */ | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "3129 Bring link to diagnostic state.\n"); | |
| loopback_mode = (struct diag_mode_set *) | |
| job->request->rqst_data.h_vendor.vendor_cmd; | |
| link_flags = loopback_mode->type; | |
| timeout = loopback_mode->timeout * 100; | |
| rc = lpfc_sli4_bsg_set_link_diag_state(phba, 1); | |
| if (rc) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "3130 Failed to bring link to diagnostic " | |
| "state, rc:x%x\n", rc); | |
| goto loopback_mode_exit; | |
| } | |
| /* wait for link down before proceeding */ | |
| i = 0; | |
| while (phba->link_state != LPFC_LINK_DOWN) { | |
| if (i++ > timeout) { | |
| rc = -ETIMEDOUT; | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "3131 Timeout waiting for link to " | |
| "diagnostic mode, timeout:%d ms\n", | |
| timeout * 10); | |
| goto loopback_mode_exit; | |
| } | |
| msleep(10); | |
| } | |
| /* set up loopback mode */ | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "3132 Set up loopback mode:x%x\n", link_flags); | |
| if (link_flags == INTERNAL_LOOP_BACK) | |
| rc = lpfc_sli4_bsg_set_internal_loopback(phba); | |
| else if (link_flags == EXTERNAL_LOOP_BACK) | |
| rc = lpfc_hba_init_link_fc_topology(phba, | |
| FLAGS_TOPOLOGY_MODE_PT_PT, | |
| MBX_NOWAIT); | |
| else { | |
| rc = -EINVAL; | |
| lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, | |
| "3141 Loopback mode:x%x not supported\n", | |
| link_flags); | |
| goto loopback_mode_exit; | |
| } | |
| if (!rc) { | |
| /* wait for the link attention interrupt */ | |
| msleep(100); | |
| i = 0; | |
| while (phba->link_state < LPFC_LINK_UP) { | |
| if (i++ > timeout) { | |
| rc = -ETIMEDOUT; | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "3137 Timeout waiting for link up " | |
| "in loopback mode, timeout:%d ms\n", | |
| timeout * 10); | |
| break; | |
| } | |
| msleep(10); | |
| } | |
| } | |
| /* port resource registration setup for loopback diagnostic */ | |
| if (!rc) { | |
| /* set up a none zero myDID for loopback test */ | |
| phba->pport->fc_myDID = 1; | |
| rc = lpfc_sli4_diag_fcport_reg_setup(phba); | |
| } else | |
| goto loopback_mode_exit; | |
| if (!rc) { | |
| /* wait for the port ready */ | |
| msleep(100); | |
| i = 0; | |
| while (phba->link_state != LPFC_HBA_READY) { | |
| if (i++ > timeout) { | |
| rc = -ETIMEDOUT; | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "3133 Timeout waiting for port " | |
| "loopback mode ready, timeout:%d ms\n", | |
| timeout * 10); | |
| break; | |
| } | |
| msleep(10); | |
| } | |
| } | |
| loopback_mode_exit: | |
| /* clear loopback diagnostic mode */ | |
| if (rc) { | |
| spin_lock_irq(&phba->hbalock); | |
| phba->link_flag &= ~LS_LOOPBACK_MODE; | |
| spin_unlock_irq(&phba->hbalock); | |
| } | |
| lpfc_bsg_diag_mode_exit(phba); | |
| job_error: | |
| /* make error code available to userspace */ | |
| job->reply->result = rc; | |
| /* complete the job back to userspace if no error */ | |
| if (rc == 0) | |
| job->job_done(job); | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_diag_loopback_mode - bsg vendor command for diag loopback mode | |
| * @job: LPFC_BSG_VENDOR_DIAG_MODE | |
| * | |
| * This function is responsible for responding to check and dispatch bsg diag | |
| * command from the user to proper driver action routines. | |
| */ | |
| static int | |
| lpfc_bsg_diag_loopback_mode(struct fc_bsg_job *job) | |
| { | |
| struct Scsi_Host *shost; | |
| struct lpfc_vport *vport; | |
| struct lpfc_hba *phba; | |
| int rc; | |
| shost = job->shost; | |
| if (!shost) | |
| return -ENODEV; | |
| vport = (struct lpfc_vport *)job->shost->hostdata; | |
| if (!vport) | |
| return -ENODEV; | |
| phba = vport->phba; | |
| if (!phba) | |
| return -ENODEV; | |
| if (phba->sli_rev < LPFC_SLI_REV4) | |
| rc = lpfc_sli3_bsg_diag_loopback_mode(phba, job); | |
| else if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) == | |
| LPFC_SLI_INTF_IF_TYPE_2) | |
| rc = lpfc_sli4_bsg_diag_loopback_mode(phba, job); | |
| else | |
| rc = -ENODEV; | |
| return rc; | |
| } | |
| /** | |
| * lpfc_sli4_bsg_diag_mode_end - sli4 bsg vendor command for ending diag mode | |
| * @job: LPFC_BSG_VENDOR_DIAG_MODE_END | |
| * | |
| * This function is responsible for responding to check and dispatch bsg diag | |
| * command from the user to proper driver action routines. | |
| */ | |
| static int | |
| lpfc_sli4_bsg_diag_mode_end(struct fc_bsg_job *job) | |
| { | |
| struct Scsi_Host *shost; | |
| struct lpfc_vport *vport; | |
| struct lpfc_hba *phba; | |
| struct diag_mode_set *loopback_mode_end_cmd; | |
| uint32_t timeout; | |
| int rc, i; | |
| shost = job->shost; | |
| if (!shost) | |
| return -ENODEV; | |
| vport = (struct lpfc_vport *)job->shost->hostdata; | |
| if (!vport) | |
| return -ENODEV; | |
| phba = vport->phba; | |
| if (!phba) | |
| return -ENODEV; | |
| if (phba->sli_rev < LPFC_SLI_REV4) | |
| return -ENODEV; | |
| if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != | |
| LPFC_SLI_INTF_IF_TYPE_2) | |
| return -ENODEV; | |
| /* clear loopback diagnostic mode */ | |
| spin_lock_irq(&phba->hbalock); | |
| phba->link_flag &= ~LS_LOOPBACK_MODE; | |
| spin_unlock_irq(&phba->hbalock); | |
| loopback_mode_end_cmd = (struct diag_mode_set *) | |
| job->request->rqst_data.h_vendor.vendor_cmd; | |
| timeout = loopback_mode_end_cmd->timeout * 100; | |
| rc = lpfc_sli4_bsg_set_link_diag_state(phba, 0); | |
| if (rc) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "3139 Failed to bring link to diagnostic " | |
| "state, rc:x%x\n", rc); | |
| goto loopback_mode_end_exit; | |
| } | |
| /* wait for link down before proceeding */ | |
| i = 0; | |
| while (phba->link_state != LPFC_LINK_DOWN) { | |
| if (i++ > timeout) { | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "3140 Timeout waiting for link to " | |
| "diagnostic mode_end, timeout:%d ms\n", | |
| timeout * 10); | |
| /* there is nothing much we can do here */ | |
| break; | |
| } | |
| msleep(10); | |
| } | |
| /* reset port resource registrations */ | |
| rc = lpfc_selective_reset(phba); | |
| phba->pport->fc_myDID = 0; | |
| loopback_mode_end_exit: | |
| /* make return code available to userspace */ | |
| job->reply->result = rc; | |
| /* complete the job back to userspace if no error */ | |
| if (rc == 0) | |
| job->job_done(job); | |
| return rc; | |
| } | |
| /** | |
| * lpfc_sli4_bsg_link_diag_test - sli4 bsg vendor command for diag link test | |
| * @job: LPFC_BSG_VENDOR_DIAG_LINK_TEST | |
| * | |
| * This function is to perform SLI4 diag link test request from the user | |
| * applicaiton. | |
| */ | |
| static int | |
| lpfc_sli4_bsg_link_diag_test(struct fc_bsg_job *job) | |
| { | |
| struct Scsi_Host *shost; | |
| struct lpfc_vport *vport; | |
| struct lpfc_hba *phba; | |
| LPFC_MBOXQ_t *pmboxq; | |
| struct sli4_link_diag *link_diag_test_cmd; | |
| uint32_t req_len, alloc_len; | |
| struct lpfc_mbx_run_link_diag_test *run_link_diag_test; | |
| union lpfc_sli4_cfg_shdr *shdr; | |
| uint32_t shdr_status, shdr_add_status; | |
| struct diag_status *diag_status_reply; | |
| int mbxstatus, rc = 0; | |
| shost = job->shost; | |
| if (!shost) { | |
| rc = -ENODEV; | |
| goto job_error; | |
| } | |
| vport = (struct lpfc_vport *)job->shost->hostdata; | |
| if (!vport) { | |
| rc = -ENODEV; | |
| goto job_error; | |
| } | |
| phba = vport->phba; | |
| if (!phba) { | |
| rc = -ENODEV; | |
| goto job_error; | |
| } | |
| if (phba->sli_rev < LPFC_SLI_REV4) { | |
| rc = -ENODEV; | |
| goto job_error; | |
| } | |
| if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != | |
| LPFC_SLI_INTF_IF_TYPE_2) { | |
| rc = -ENODEV; | |
| goto job_error; | |
| } | |
| if (job->request_len < sizeof(struct fc_bsg_request) + | |
| sizeof(struct sli4_link_diag)) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "3013 Received LINK DIAG TEST request " | |
| " size:%d below the minimum size:%d\n", | |
| job->request_len, | |
| (int)(sizeof(struct fc_bsg_request) + | |
| sizeof(struct sli4_link_diag))); | |
| rc = -EINVAL; | |
| goto job_error; | |
| } | |
| rc = lpfc_bsg_diag_mode_enter(phba); | |
| if (rc) | |
| goto job_error; | |
| link_diag_test_cmd = (struct sli4_link_diag *) | |
| job->request->rqst_data.h_vendor.vendor_cmd; | |
| rc = lpfc_sli4_bsg_set_link_diag_state(phba, 1); | |
| if (rc) | |
| goto job_error; | |
| pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | |
| if (!pmboxq) { | |
| rc = -ENOMEM; | |
| goto link_diag_test_exit; | |
| } | |
| req_len = (sizeof(struct lpfc_mbx_set_link_diag_state) - | |
| sizeof(struct lpfc_sli4_cfg_mhdr)); | |
| alloc_len = lpfc_sli4_config(phba, pmboxq, LPFC_MBOX_SUBSYSTEM_FCOE, | |
| LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE, | |
| req_len, LPFC_SLI4_MBX_EMBED); | |
| if (alloc_len != req_len) { | |
| rc = -ENOMEM; | |
| goto link_diag_test_exit; | |
| } | |
| run_link_diag_test = &pmboxq->u.mqe.un.link_diag_test; | |
| bf_set(lpfc_mbx_run_diag_test_link_num, &run_link_diag_test->u.req, | |
| phba->sli4_hba.lnk_info.lnk_no); | |
| bf_set(lpfc_mbx_run_diag_test_link_type, &run_link_diag_test->u.req, | |
| phba->sli4_hba.lnk_info.lnk_tp); | |
| bf_set(lpfc_mbx_run_diag_test_test_id, &run_link_diag_test->u.req, | |
| link_diag_test_cmd->test_id); | |
| bf_set(lpfc_mbx_run_diag_test_loops, &run_link_diag_test->u.req, | |
| link_diag_test_cmd->loops); | |
| bf_set(lpfc_mbx_run_diag_test_test_ver, &run_link_diag_test->u.req, | |
| link_diag_test_cmd->test_version); | |
| bf_set(lpfc_mbx_run_diag_test_err_act, &run_link_diag_test->u.req, | |
| link_diag_test_cmd->error_action); | |
| mbxstatus = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); | |
| shdr = (union lpfc_sli4_cfg_shdr *) | |
| &pmboxq->u.mqe.un.sli4_config.header.cfg_shdr; | |
| shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response); | |
| shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response); | |
| if (shdr_status || shdr_add_status || mbxstatus) { | |
| lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, | |
| "3010 Run link diag test mailbox failed with " | |
| "mbx_status x%x status x%x, add_status x%x\n", | |
| mbxstatus, shdr_status, shdr_add_status); | |
| } | |
| diag_status_reply = (struct diag_status *) | |
| job->reply->reply_data.vendor_reply.vendor_rsp; | |
| if (job->reply_len < | |
| sizeof(struct fc_bsg_request) + sizeof(struct diag_status)) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "3012 Received Run link diag test reply " | |
| "below minimum size (%d): reply_len:%d\n", | |
| (int)(sizeof(struct fc_bsg_request) + | |
| sizeof(struct diag_status)), | |
| job->reply_len); | |
| rc = -EINVAL; | |
| goto job_error; | |
| } | |
| diag_status_reply->mbox_status = mbxstatus; | |
| diag_status_reply->shdr_status = shdr_status; | |
| diag_status_reply->shdr_add_status = shdr_add_status; | |
| link_diag_test_exit: | |
| rc = lpfc_sli4_bsg_set_link_diag_state(phba, 0); | |
| if (pmboxq) | |
| mempool_free(pmboxq, phba->mbox_mem_pool); | |
| lpfc_bsg_diag_mode_exit(phba); | |
| job_error: | |
| /* make error code available to userspace */ | |
| job->reply->result = rc; | |
| /* complete the job back to userspace if no error */ | |
| if (rc == 0) | |
| job->job_done(job); | |
| return rc; | |
| } | |
| /** | |
| * lpfcdiag_loop_self_reg - obtains a remote port login id | |
| * @phba: Pointer to HBA context object | |
| * @rpi: Pointer to a remote port login id | |
| * | |
| * This function obtains a remote port login id so the diag loopback test | |
| * can send and receive its own unsolicited CT command. | |
| **/ | |
| static int lpfcdiag_loop_self_reg(struct lpfc_hba *phba, uint16_t *rpi) | |
| { | |
| LPFC_MBOXQ_t *mbox; | |
| struct lpfc_dmabuf *dmabuff; | |
| int status; | |
| mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | |
| if (!mbox) | |
| return -ENOMEM; | |
| if (phba->sli_rev < LPFC_SLI_REV4) | |
| status = lpfc_reg_rpi(phba, 0, phba->pport->fc_myDID, | |
| (uint8_t *)&phba->pport->fc_sparam, | |
| mbox, *rpi); | |
| else { | |
| *rpi = lpfc_sli4_alloc_rpi(phba); | |
| status = lpfc_reg_rpi(phba, phba->pport->vpi, | |
| phba->pport->fc_myDID, | |
| (uint8_t *)&phba->pport->fc_sparam, | |
| mbox, *rpi); | |
| } | |
| if (status) { | |
| mempool_free(mbox, phba->mbox_mem_pool); | |
| if (phba->sli_rev == LPFC_SLI_REV4) | |
| lpfc_sli4_free_rpi(phba, *rpi); | |
| return -ENOMEM; | |
| } | |
| dmabuff = (struct lpfc_dmabuf *) mbox->context1; | |
| mbox->context1 = NULL; | |
| mbox->context2 = NULL; | |
| status = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); | |
| if ((status != MBX_SUCCESS) || (mbox->u.mb.mbxStatus)) { | |
| lpfc_mbuf_free(phba, dmabuff->virt, dmabuff->phys); | |
| kfree(dmabuff); | |
| if (status != MBX_TIMEOUT) | |
| mempool_free(mbox, phba->mbox_mem_pool); | |
| if (phba->sli_rev == LPFC_SLI_REV4) | |
| lpfc_sli4_free_rpi(phba, *rpi); | |
| return -ENODEV; | |
| } | |
| if (phba->sli_rev < LPFC_SLI_REV4) | |
| *rpi = mbox->u.mb.un.varWords[0]; | |
| lpfc_mbuf_free(phba, dmabuff->virt, dmabuff->phys); | |
| kfree(dmabuff); | |
| mempool_free(mbox, phba->mbox_mem_pool); | |
| return 0; | |
| } | |
| /** | |
| * lpfcdiag_loop_self_unreg - unregs from the rpi | |
| * @phba: Pointer to HBA context object | |
| * @rpi: Remote port login id | |
| * | |
| * This function unregisters the rpi obtained in lpfcdiag_loop_self_reg | |
| **/ | |
| static int lpfcdiag_loop_self_unreg(struct lpfc_hba *phba, uint16_t rpi) | |
| { | |
| LPFC_MBOXQ_t *mbox; | |
| int status; | |
| /* Allocate mboxq structure */ | |
| mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | |
| if (mbox == NULL) | |
| return -ENOMEM; | |
| if (phba->sli_rev < LPFC_SLI_REV4) | |
| lpfc_unreg_login(phba, 0, rpi, mbox); | |
| else | |
| lpfc_unreg_login(phba, phba->pport->vpi, | |
| phba->sli4_hba.rpi_ids[rpi], mbox); | |
| status = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO); | |
| if ((status != MBX_SUCCESS) || (mbox->u.mb.mbxStatus)) { | |
| if (status != MBX_TIMEOUT) | |
| mempool_free(mbox, phba->mbox_mem_pool); | |
| return -EIO; | |
| } | |
| mempool_free(mbox, phba->mbox_mem_pool); | |
| if (phba->sli_rev == LPFC_SLI_REV4) | |
| lpfc_sli4_free_rpi(phba, rpi); | |
| return 0; | |
| } | |
| /** | |
| * lpfcdiag_loop_get_xri - obtains the transmit and receive ids | |
| * @phba: Pointer to HBA context object | |
| * @rpi: Remote port login id | |
| * @txxri: Pointer to transmit exchange id | |
| * @rxxri: Pointer to response exchabge id | |
| * | |
| * This function obtains the transmit and receive ids required to send | |
| * an unsolicited ct command with a payload. A special lpfc FsType and CmdRsp | |
| * flags are used to the unsolicted response handler is able to process | |
| * the ct command sent on the same port. | |
| **/ | |
| static int lpfcdiag_loop_get_xri(struct lpfc_hba *phba, uint16_t rpi, | |
| uint16_t *txxri, uint16_t * rxxri) | |
| { | |
| struct lpfc_bsg_event *evt; | |
| struct lpfc_iocbq *cmdiocbq, *rspiocbq; | |
| IOCB_t *cmd, *rsp; | |
| struct lpfc_dmabuf *dmabuf; | |
| struct ulp_bde64 *bpl = NULL; | |
| struct lpfc_sli_ct_request *ctreq = NULL; | |
| int ret_val = 0; | |
| int time_left; | |
| int iocb_stat = IOCB_SUCCESS; | |
| unsigned long flags; | |
| *txxri = 0; | |
| *rxxri = 0; | |
| evt = lpfc_bsg_event_new(FC_REG_CT_EVENT, current->pid, | |
| SLI_CT_ELX_LOOPBACK); | |
| if (!evt) | |
| return -ENOMEM; | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| list_add(&evt->node, &phba->ct_ev_waiters); | |
| lpfc_bsg_event_ref(evt); | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| cmdiocbq = lpfc_sli_get_iocbq(phba); | |
| rspiocbq = lpfc_sli_get_iocbq(phba); | |
| dmabuf = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); | |
| if (dmabuf) { | |
| dmabuf->virt = lpfc_mbuf_alloc(phba, 0, &dmabuf->phys); | |
| if (dmabuf->virt) { | |
| INIT_LIST_HEAD(&dmabuf->list); | |
| bpl = (struct ulp_bde64 *) dmabuf->virt; | |
| memset(bpl, 0, sizeof(*bpl)); | |
| ctreq = (struct lpfc_sli_ct_request *)(bpl + 1); | |
| bpl->addrHigh = | |
| le32_to_cpu(putPaddrHigh(dmabuf->phys + | |
| sizeof(*bpl))); | |
| bpl->addrLow = | |
| le32_to_cpu(putPaddrLow(dmabuf->phys + | |
| sizeof(*bpl))); | |
| bpl->tus.f.bdeFlags = 0; | |
| bpl->tus.f.bdeSize = ELX_LOOPBACK_HEADER_SZ; | |
| bpl->tus.w = le32_to_cpu(bpl->tus.w); | |
| } | |
| } | |
| if (cmdiocbq == NULL || rspiocbq == NULL || | |
| dmabuf == NULL || bpl == NULL || ctreq == NULL || | |
| dmabuf->virt == NULL) { | |
| ret_val = -ENOMEM; | |
| goto err_get_xri_exit; | |
| } | |
| cmd = &cmdiocbq->iocb; | |
| rsp = &rspiocbq->iocb; | |
| memset(ctreq, 0, ELX_LOOPBACK_HEADER_SZ); | |
| ctreq->RevisionId.bits.Revision = SLI_CT_REVISION; | |
| ctreq->RevisionId.bits.InId = 0; | |
| ctreq->FsType = SLI_CT_ELX_LOOPBACK; | |
| ctreq->FsSubType = 0; | |
| ctreq->CommandResponse.bits.CmdRsp = ELX_LOOPBACK_XRI_SETUP; | |
| ctreq->CommandResponse.bits.Size = 0; | |
| cmd->un.xseq64.bdl.addrHigh = putPaddrHigh(dmabuf->phys); | |
| cmd->un.xseq64.bdl.addrLow = putPaddrLow(dmabuf->phys); | |
| cmd->un.xseq64.bdl.bdeFlags = BUFF_TYPE_BLP_64; | |
| cmd->un.xseq64.bdl.bdeSize = sizeof(*bpl); | |
| cmd->un.xseq64.w5.hcsw.Fctl = LA; | |
| cmd->un.xseq64.w5.hcsw.Dfctl = 0; | |
| cmd->un.xseq64.w5.hcsw.Rctl = FC_RCTL_DD_UNSOL_CTL; | |
| cmd->un.xseq64.w5.hcsw.Type = FC_TYPE_CT; | |
| cmd->ulpCommand = CMD_XMIT_SEQUENCE64_CR; | |
| cmd->ulpBdeCount = 1; | |
| cmd->ulpLe = 1; | |
| cmd->ulpClass = CLASS3; | |
| cmd->ulpContext = rpi; | |
| cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC; | |
| cmdiocbq->vport = phba->pport; | |
| cmdiocbq->iocb_cmpl = NULL; | |
| iocb_stat = lpfc_sli_issue_iocb_wait(phba, LPFC_ELS_RING, cmdiocbq, | |
| rspiocbq, | |
| (phba->fc_ratov * 2) | |
| + LPFC_DRVR_TIMEOUT); | |
| if ((iocb_stat != IOCB_SUCCESS) || (rsp->ulpStatus != IOSTAT_SUCCESS)) { | |
| ret_val = -EIO; | |
| goto err_get_xri_exit; | |
| } | |
| *txxri = rsp->ulpContext; | |
| evt->waiting = 1; | |
| evt->wait_time_stamp = jiffies; | |
| time_left = wait_event_interruptible_timeout( | |
| evt->wq, !list_empty(&evt->events_to_see), | |
| msecs_to_jiffies(1000 * | |
| ((phba->fc_ratov * 2) + LPFC_DRVR_TIMEOUT))); | |
| if (list_empty(&evt->events_to_see)) | |
| ret_val = (time_left) ? -EINTR : -ETIMEDOUT; | |
| else { | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| list_move(evt->events_to_see.prev, &evt->events_to_get); | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| *rxxri = (list_entry(evt->events_to_get.prev, | |
| typeof(struct event_data), | |
| node))->immed_dat; | |
| } | |
| evt->waiting = 0; | |
| err_get_xri_exit: | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| lpfc_bsg_event_unref(evt); /* release ref */ | |
| lpfc_bsg_event_unref(evt); /* delete */ | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| if (dmabuf) { | |
| if (dmabuf->virt) | |
| lpfc_mbuf_free(phba, dmabuf->virt, dmabuf->phys); | |
| kfree(dmabuf); | |
| } | |
| if (cmdiocbq && (iocb_stat != IOCB_TIMEDOUT)) | |
| lpfc_sli_release_iocbq(phba, cmdiocbq); | |
| if (rspiocbq) | |
| lpfc_sli_release_iocbq(phba, rspiocbq); | |
| return ret_val; | |
| } | |
| /** | |
| * lpfc_bsg_dma_page_alloc - allocate a bsg mbox page sized dma buffers | |
| * @phba: Pointer to HBA context object | |
| * | |
| * This function allocates BSG_MBOX_SIZE (4KB) page size dma buffer and. | |
| * returns the pointer to the buffer. | |
| **/ | |
| static struct lpfc_dmabuf * | |
| lpfc_bsg_dma_page_alloc(struct lpfc_hba *phba) | |
| { | |
| struct lpfc_dmabuf *dmabuf; | |
| struct pci_dev *pcidev = phba->pcidev; | |
| /* allocate dma buffer struct */ | |
| dmabuf = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); | |
| if (!dmabuf) | |
| return NULL; | |
| INIT_LIST_HEAD(&dmabuf->list); | |
| /* now, allocate dma buffer */ | |
| dmabuf->virt = dma_zalloc_coherent(&pcidev->dev, BSG_MBOX_SIZE, | |
| &(dmabuf->phys), GFP_KERNEL); | |
| if (!dmabuf->virt) { | |
| kfree(dmabuf); | |
| return NULL; | |
| } | |
| return dmabuf; | |
| } | |
| /** | |
| * lpfc_bsg_dma_page_free - free a bsg mbox page sized dma buffer | |
| * @phba: Pointer to HBA context object. | |
| * @dmabuf: Pointer to the bsg mbox page sized dma buffer descriptor. | |
| * | |
| * This routine just simply frees a dma buffer and its associated buffer | |
| * descriptor referred by @dmabuf. | |
| **/ | |
| static void | |
| lpfc_bsg_dma_page_free(struct lpfc_hba *phba, struct lpfc_dmabuf *dmabuf) | |
| { | |
| struct pci_dev *pcidev = phba->pcidev; | |
| if (!dmabuf) | |
| return; | |
| if (dmabuf->virt) | |
| dma_free_coherent(&pcidev->dev, BSG_MBOX_SIZE, | |
| dmabuf->virt, dmabuf->phys); | |
| kfree(dmabuf); | |
| return; | |
| } | |
| /** | |
| * lpfc_bsg_dma_page_list_free - free a list of bsg mbox page sized dma buffers | |
| * @phba: Pointer to HBA context object. | |
| * @dmabuf_list: Pointer to a list of bsg mbox page sized dma buffer descs. | |
| * | |
| * This routine just simply frees all dma buffers and their associated buffer | |
| * descriptors referred by @dmabuf_list. | |
| **/ | |
| static void | |
| lpfc_bsg_dma_page_list_free(struct lpfc_hba *phba, | |
| struct list_head *dmabuf_list) | |
| { | |
| struct lpfc_dmabuf *dmabuf, *next_dmabuf; | |
| if (list_empty(dmabuf_list)) | |
| return; | |
| list_for_each_entry_safe(dmabuf, next_dmabuf, dmabuf_list, list) { | |
| list_del_init(&dmabuf->list); | |
| lpfc_bsg_dma_page_free(phba, dmabuf); | |
| } | |
| return; | |
| } | |
| /** | |
| * diag_cmd_data_alloc - fills in a bde struct with dma buffers | |
| * @phba: Pointer to HBA context object | |
| * @bpl: Pointer to 64 bit bde structure | |
| * @size: Number of bytes to process | |
| * @nocopydata: Flag to copy user data into the allocated buffer | |
| * | |
| * This function allocates page size buffers and populates an lpfc_dmabufext. | |
| * If allowed the user data pointed to with indataptr is copied into the kernel | |
| * memory. The chained list of page size buffers is returned. | |
| **/ | |
| static struct lpfc_dmabufext * | |
| diag_cmd_data_alloc(struct lpfc_hba *phba, | |
| struct ulp_bde64 *bpl, uint32_t size, | |
| int nocopydata) | |
| { | |
| struct lpfc_dmabufext *mlist = NULL; | |
| struct lpfc_dmabufext *dmp; | |
| int cnt, offset = 0, i = 0; | |
| struct pci_dev *pcidev; | |
| pcidev = phba->pcidev; | |
| while (size) { | |
| /* We get chunks of 4K */ | |
| if (size > BUF_SZ_4K) | |
| cnt = BUF_SZ_4K; | |
| else | |
| cnt = size; | |
| /* allocate struct lpfc_dmabufext buffer header */ | |
| dmp = kmalloc(sizeof(struct lpfc_dmabufext), GFP_KERNEL); | |
| if (!dmp) | |
| goto out; | |
| INIT_LIST_HEAD(&dmp->dma.list); | |
| /* Queue it to a linked list */ | |
| if (mlist) | |
| list_add_tail(&dmp->dma.list, &mlist->dma.list); | |
| else | |
| mlist = dmp; | |
| /* allocate buffer */ | |
| dmp->dma.virt = dma_alloc_coherent(&pcidev->dev, | |
| cnt, | |
| &(dmp->dma.phys), | |
| GFP_KERNEL); | |
| if (!dmp->dma.virt) | |
| goto out; | |
| dmp->size = cnt; | |
| if (nocopydata) { | |
| bpl->tus.f.bdeFlags = 0; | |
| pci_dma_sync_single_for_device(phba->pcidev, | |
| dmp->dma.phys, LPFC_BPL_SIZE, PCI_DMA_TODEVICE); | |
| } else { | |
| memset((uint8_t *)dmp->dma.virt, 0, cnt); | |
| bpl->tus.f.bdeFlags = BUFF_TYPE_BDE_64I; | |
| } | |
| /* build buffer ptr list for IOCB */ | |
| bpl->addrLow = le32_to_cpu(putPaddrLow(dmp->dma.phys)); | |
| bpl->addrHigh = le32_to_cpu(putPaddrHigh(dmp->dma.phys)); | |
| bpl->tus.f.bdeSize = (ushort) cnt; | |
| bpl->tus.w = le32_to_cpu(bpl->tus.w); | |
| bpl++; | |
| i++; | |
| offset += cnt; | |
| size -= cnt; | |
| } | |
| if (mlist) { | |
| mlist->flag = i; | |
| return mlist; | |
| } | |
| out: | |
| diag_cmd_data_free(phba, mlist); | |
| return NULL; | |
| } | |
| /** | |
| * lpfcdiag_loop_post_rxbufs - post the receive buffers for an unsol CT cmd | |
| * @phba: Pointer to HBA context object | |
| * @rxxri: Receive exchange id | |
| * @len: Number of data bytes | |
| * | |
| * This function allocates and posts a data buffer of sufficient size to receive | |
| * an unsolicted CT command. | |
| **/ | |
| static int lpfcdiag_loop_post_rxbufs(struct lpfc_hba *phba, uint16_t rxxri, | |
| size_t len) | |
| { | |
| struct lpfc_sli *psli = &phba->sli; | |
| struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING]; | |
| struct lpfc_iocbq *cmdiocbq; | |
| IOCB_t *cmd = NULL; | |
| struct list_head head, *curr, *next; | |
| struct lpfc_dmabuf *rxbmp; | |
| struct lpfc_dmabuf *dmp; | |
| struct lpfc_dmabuf *mp[2] = {NULL, NULL}; | |
| struct ulp_bde64 *rxbpl = NULL; | |
| uint32_t num_bde; | |
| struct lpfc_dmabufext *rxbuffer = NULL; | |
| int ret_val = 0; | |
| int iocb_stat; | |
| int i = 0; | |
| cmdiocbq = lpfc_sli_get_iocbq(phba); | |
| rxbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); | |
| if (rxbmp != NULL) { | |
| rxbmp->virt = lpfc_mbuf_alloc(phba, 0, &rxbmp->phys); | |
| if (rxbmp->virt) { | |
| INIT_LIST_HEAD(&rxbmp->list); | |
| rxbpl = (struct ulp_bde64 *) rxbmp->virt; | |
| rxbuffer = diag_cmd_data_alloc(phba, rxbpl, len, 0); | |
| } | |
| } | |
| if (!cmdiocbq || !rxbmp || !rxbpl || !rxbuffer) { | |
| ret_val = -ENOMEM; | |
| goto err_post_rxbufs_exit; | |
| } | |
| /* Queue buffers for the receive exchange */ | |
| num_bde = (uint32_t)rxbuffer->flag; | |
| dmp = &rxbuffer->dma; | |
| cmd = &cmdiocbq->iocb; | |
| i = 0; | |
| INIT_LIST_HEAD(&head); | |
| list_add_tail(&head, &dmp->list); | |
| list_for_each_safe(curr, next, &head) { | |
| mp[i] = list_entry(curr, struct lpfc_dmabuf, list); | |
| list_del(curr); | |
| if (phba->sli3_options & LPFC_SLI3_HBQ_ENABLED) { | |
| mp[i]->buffer_tag = lpfc_sli_get_buffer_tag(phba); | |
| cmd->un.quexri64cx.buff.bde.addrHigh = | |
| putPaddrHigh(mp[i]->phys); | |
| cmd->un.quexri64cx.buff.bde.addrLow = | |
| putPaddrLow(mp[i]->phys); | |
| cmd->un.quexri64cx.buff.bde.tus.f.bdeSize = | |
| ((struct lpfc_dmabufext *)mp[i])->size; | |
| cmd->un.quexri64cx.buff.buffer_tag = mp[i]->buffer_tag; | |
| cmd->ulpCommand = CMD_QUE_XRI64_CX; | |
| cmd->ulpPU = 0; | |
| cmd->ulpLe = 1; | |
| cmd->ulpBdeCount = 1; | |
| cmd->unsli3.que_xri64cx_ext_words.ebde_count = 0; | |
| } else { | |
| cmd->un.cont64[i].addrHigh = putPaddrHigh(mp[i]->phys); | |
| cmd->un.cont64[i].addrLow = putPaddrLow(mp[i]->phys); | |
| cmd->un.cont64[i].tus.f.bdeSize = | |
| ((struct lpfc_dmabufext *)mp[i])->size; | |
| cmd->ulpBdeCount = ++i; | |
| if ((--num_bde > 0) && (i < 2)) | |
| continue; | |
| cmd->ulpCommand = CMD_QUE_XRI_BUF64_CX; | |
| cmd->ulpLe = 1; | |
| } | |
| cmd->ulpClass = CLASS3; | |
| cmd->ulpContext = rxxri; | |
| iocb_stat = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, cmdiocbq, | |
| 0); | |
| if (iocb_stat == IOCB_ERROR) { | |
| diag_cmd_data_free(phba, | |
| (struct lpfc_dmabufext *)mp[0]); | |
| if (mp[1]) | |
| diag_cmd_data_free(phba, | |
| (struct lpfc_dmabufext *)mp[1]); | |
| dmp = list_entry(next, struct lpfc_dmabuf, list); | |
| ret_val = -EIO; | |
| goto err_post_rxbufs_exit; | |
| } | |
| lpfc_sli_ringpostbuf_put(phba, pring, mp[0]); | |
| if (mp[1]) { | |
| lpfc_sli_ringpostbuf_put(phba, pring, mp[1]); | |
| mp[1] = NULL; | |
| } | |
| /* The iocb was freed by lpfc_sli_issue_iocb */ | |
| cmdiocbq = lpfc_sli_get_iocbq(phba); | |
| if (!cmdiocbq) { | |
| dmp = list_entry(next, struct lpfc_dmabuf, list); | |
| ret_val = -EIO; | |
| goto err_post_rxbufs_exit; | |
| } | |
| cmd = &cmdiocbq->iocb; | |
| i = 0; | |
| } | |
| list_del(&head); | |
| err_post_rxbufs_exit: | |
| if (rxbmp) { | |
| if (rxbmp->virt) | |
| lpfc_mbuf_free(phba, rxbmp->virt, rxbmp->phys); | |
| kfree(rxbmp); | |
| } | |
| if (cmdiocbq) | |
| lpfc_sli_release_iocbq(phba, cmdiocbq); | |
| return ret_val; | |
| } | |
| /** | |
| * lpfc_bsg_diag_loopback_run - run loopback on a port by issue ct cmd to itself | |
| * @job: LPFC_BSG_VENDOR_DIAG_TEST fc_bsg_job | |
| * | |
| * This function receives a user data buffer to be transmitted and received on | |
| * the same port, the link must be up and in loopback mode prior | |
| * to being called. | |
| * 1. A kernel buffer is allocated to copy the user data into. | |
| * 2. The port registers with "itself". | |
| * 3. The transmit and receive exchange ids are obtained. | |
| * 4. The receive exchange id is posted. | |
| * 5. A new els loopback event is created. | |
| * 6. The command and response iocbs are allocated. | |
| * 7. The cmd iocb FsType is set to elx loopback and the CmdRsp to looppback. | |
| * | |
| * This function is meant to be called n times while the port is in loopback | |
| * so it is the apps responsibility to issue a reset to take the port out | |
| * of loopback mode. | |
| **/ | |
| static int | |
| lpfc_bsg_diag_loopback_run(struct fc_bsg_job *job) | |
| { | |
| struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; | |
| struct lpfc_hba *phba = vport->phba; | |
| struct diag_mode_test *diag_mode; | |
| struct lpfc_bsg_event *evt; | |
| struct event_data *evdat; | |
| struct lpfc_sli *psli = &phba->sli; | |
| uint32_t size; | |
| uint32_t full_size; | |
| size_t segment_len = 0, segment_offset = 0, current_offset = 0; | |
| uint16_t rpi = 0; | |
| struct lpfc_iocbq *cmdiocbq, *rspiocbq = NULL; | |
| IOCB_t *cmd, *rsp = NULL; | |
| struct lpfc_sli_ct_request *ctreq; | |
| struct lpfc_dmabuf *txbmp; | |
| struct ulp_bde64 *txbpl = NULL; | |
| struct lpfc_dmabufext *txbuffer = NULL; | |
| struct list_head head; | |
| struct lpfc_dmabuf *curr; | |
| uint16_t txxri = 0, rxxri; | |
| uint32_t num_bde; | |
| uint8_t *ptr = NULL, *rx_databuf = NULL; | |
| int rc = 0; | |
| int time_left; | |
| int iocb_stat = IOCB_SUCCESS; | |
| unsigned long flags; | |
| void *dataout = NULL; | |
| uint32_t total_mem; | |
| /* in case no data is returned return just the return code */ | |
| job->reply->reply_payload_rcv_len = 0; | |
| if (job->request_len < | |
| sizeof(struct fc_bsg_request) + sizeof(struct diag_mode_test)) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2739 Received DIAG TEST request below minimum " | |
| "size\n"); | |
| rc = -EINVAL; | |
| goto loopback_test_exit; | |
| } | |
| if (job->request_payload.payload_len != | |
| job->reply_payload.payload_len) { | |
| rc = -EINVAL; | |
| goto loopback_test_exit; | |
| } | |
| diag_mode = (struct diag_mode_test *) | |
| job->request->rqst_data.h_vendor.vendor_cmd; | |
| if ((phba->link_state == LPFC_HBA_ERROR) || | |
| (psli->sli_flag & LPFC_BLOCK_MGMT_IO) || | |
| (!(psli->sli_flag & LPFC_SLI_ACTIVE))) { | |
| rc = -EACCES; | |
| goto loopback_test_exit; | |
| } | |
| if (!lpfc_is_link_up(phba) || !(phba->link_flag & LS_LOOPBACK_MODE)) { | |
| rc = -EACCES; | |
| goto loopback_test_exit; | |
| } | |
| size = job->request_payload.payload_len; | |
| full_size = size + ELX_LOOPBACK_HEADER_SZ; /* plus the header */ | |
| if ((size == 0) || (size > 80 * BUF_SZ_4K)) { | |
| rc = -ERANGE; | |
| goto loopback_test_exit; | |
| } | |
| if (full_size >= BUF_SZ_4K) { | |
| /* | |
| * Allocate memory for ioctl data. If buffer is bigger than 64k, | |
| * then we allocate 64k and re-use that buffer over and over to | |
| * xfer the whole block. This is because Linux kernel has a | |
| * problem allocating more than 120k of kernel space memory. Saw | |
| * problem with GET_FCPTARGETMAPPING... | |
| */ | |
| if (size <= (64 * 1024)) | |
| total_mem = full_size; | |
| else | |
| total_mem = 64 * 1024; | |
| } else | |
| /* Allocate memory for ioctl data */ | |
| total_mem = BUF_SZ_4K; | |
| dataout = kmalloc(total_mem, GFP_KERNEL); | |
| if (dataout == NULL) { | |
| rc = -ENOMEM; | |
| goto loopback_test_exit; | |
| } | |
| ptr = dataout; | |
| ptr += ELX_LOOPBACK_HEADER_SZ; | |
| sg_copy_to_buffer(job->request_payload.sg_list, | |
| job->request_payload.sg_cnt, | |
| ptr, size); | |
| rc = lpfcdiag_loop_self_reg(phba, &rpi); | |
| if (rc) | |
| goto loopback_test_exit; | |
| if (phba->sli_rev < LPFC_SLI_REV4) { | |
| rc = lpfcdiag_loop_get_xri(phba, rpi, &txxri, &rxxri); | |
| if (rc) { | |
| lpfcdiag_loop_self_unreg(phba, rpi); | |
| goto loopback_test_exit; | |
| } | |
| rc = lpfcdiag_loop_post_rxbufs(phba, rxxri, full_size); | |
| if (rc) { | |
| lpfcdiag_loop_self_unreg(phba, rpi); | |
| goto loopback_test_exit; | |
| } | |
| } | |
| evt = lpfc_bsg_event_new(FC_REG_CT_EVENT, current->pid, | |
| SLI_CT_ELX_LOOPBACK); | |
| if (!evt) { | |
| lpfcdiag_loop_self_unreg(phba, rpi); | |
| rc = -ENOMEM; | |
| goto loopback_test_exit; | |
| } | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| list_add(&evt->node, &phba->ct_ev_waiters); | |
| lpfc_bsg_event_ref(evt); | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| cmdiocbq = lpfc_sli_get_iocbq(phba); | |
| if (phba->sli_rev < LPFC_SLI_REV4) | |
| rspiocbq = lpfc_sli_get_iocbq(phba); | |
| txbmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); | |
| if (txbmp) { | |
| txbmp->virt = lpfc_mbuf_alloc(phba, 0, &txbmp->phys); | |
| if (txbmp->virt) { | |
| INIT_LIST_HEAD(&txbmp->list); | |
| txbpl = (struct ulp_bde64 *) txbmp->virt; | |
| txbuffer = diag_cmd_data_alloc(phba, | |
| txbpl, full_size, 0); | |
| } | |
| } | |
| if (!cmdiocbq || !txbmp || !txbpl || !txbuffer || !txbmp->virt) { | |
| rc = -ENOMEM; | |
| goto err_loopback_test_exit; | |
| } | |
| if ((phba->sli_rev < LPFC_SLI_REV4) && !rspiocbq) { | |
| rc = -ENOMEM; | |
| goto err_loopback_test_exit; | |
| } | |
| cmd = &cmdiocbq->iocb; | |
| if (phba->sli_rev < LPFC_SLI_REV4) | |
| rsp = &rspiocbq->iocb; | |
| INIT_LIST_HEAD(&head); | |
| list_add_tail(&head, &txbuffer->dma.list); | |
| list_for_each_entry(curr, &head, list) { | |
| segment_len = ((struct lpfc_dmabufext *)curr)->size; | |
| if (current_offset == 0) { | |
| ctreq = curr->virt; | |
| memset(ctreq, 0, ELX_LOOPBACK_HEADER_SZ); | |
| ctreq->RevisionId.bits.Revision = SLI_CT_REVISION; | |
| ctreq->RevisionId.bits.InId = 0; | |
| ctreq->FsType = SLI_CT_ELX_LOOPBACK; | |
| ctreq->FsSubType = 0; | |
| ctreq->CommandResponse.bits.CmdRsp = ELX_LOOPBACK_DATA; | |
| ctreq->CommandResponse.bits.Size = size; | |
| segment_offset = ELX_LOOPBACK_HEADER_SZ; | |
| } else | |
| segment_offset = 0; | |
| BUG_ON(segment_offset >= segment_len); | |
| memcpy(curr->virt + segment_offset, | |
| ptr + current_offset, | |
| segment_len - segment_offset); | |
| current_offset += segment_len - segment_offset; | |
| BUG_ON(current_offset > size); | |
| } | |
| list_del(&head); | |
| /* Build the XMIT_SEQUENCE iocb */ | |
| num_bde = (uint32_t)txbuffer->flag; | |
| cmd->un.xseq64.bdl.addrHigh = putPaddrHigh(txbmp->phys); | |
| cmd->un.xseq64.bdl.addrLow = putPaddrLow(txbmp->phys); | |
| cmd->un.xseq64.bdl.bdeFlags = BUFF_TYPE_BLP_64; | |
| cmd->un.xseq64.bdl.bdeSize = (num_bde * sizeof(struct ulp_bde64)); | |
| cmd->un.xseq64.w5.hcsw.Fctl = (LS | LA); | |
| cmd->un.xseq64.w5.hcsw.Dfctl = 0; | |
| cmd->un.xseq64.w5.hcsw.Rctl = FC_RCTL_DD_UNSOL_CTL; | |
| cmd->un.xseq64.w5.hcsw.Type = FC_TYPE_CT; | |
| cmd->ulpCommand = CMD_XMIT_SEQUENCE64_CX; | |
| cmd->ulpBdeCount = 1; | |
| cmd->ulpLe = 1; | |
| cmd->ulpClass = CLASS3; | |
| if (phba->sli_rev < LPFC_SLI_REV4) { | |
| cmd->ulpContext = txxri; | |
| } else { | |
| cmd->un.xseq64.bdl.ulpIoTag32 = 0; | |
| cmd->un.ulpWord[3] = phba->sli4_hba.rpi_ids[rpi]; | |
| cmdiocbq->context3 = txbmp; | |
| cmdiocbq->sli4_xritag = NO_XRI; | |
| cmd->unsli3.rcvsli3.ox_id = 0xffff; | |
| } | |
| cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC; | |
| cmdiocbq->iocb_flag |= LPFC_IO_LOOPBACK; | |
| cmdiocbq->vport = phba->pport; | |
| cmdiocbq->iocb_cmpl = NULL; | |
| iocb_stat = lpfc_sli_issue_iocb_wait(phba, LPFC_ELS_RING, cmdiocbq, | |
| rspiocbq, (phba->fc_ratov * 2) + | |
| LPFC_DRVR_TIMEOUT); | |
| if ((iocb_stat != IOCB_SUCCESS) || | |
| ((phba->sli_rev < LPFC_SLI_REV4) && | |
| (rsp->ulpStatus != IOSTAT_SUCCESS))) { | |
| lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, | |
| "3126 Failed loopback test issue iocb: " | |
| "iocb_stat:x%x\n", iocb_stat); | |
| rc = -EIO; | |
| goto err_loopback_test_exit; | |
| } | |
| evt->waiting = 1; | |
| time_left = wait_event_interruptible_timeout( | |
| evt->wq, !list_empty(&evt->events_to_see), | |
| msecs_to_jiffies(1000 * | |
| ((phba->fc_ratov * 2) + LPFC_DRVR_TIMEOUT))); | |
| evt->waiting = 0; | |
| if (list_empty(&evt->events_to_see)) { | |
| rc = (time_left) ? -EINTR : -ETIMEDOUT; | |
| lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, | |
| "3125 Not receiving unsolicited event, " | |
| "rc:x%x\n", rc); | |
| } else { | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| list_move(evt->events_to_see.prev, &evt->events_to_get); | |
| evdat = list_entry(evt->events_to_get.prev, | |
| typeof(*evdat), node); | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| rx_databuf = evdat->data; | |
| if (evdat->len != full_size) { | |
| lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, | |
| "1603 Loopback test did not receive expected " | |
| "data length. actual length 0x%x expected " | |
| "length 0x%x\n", | |
| evdat->len, full_size); | |
| rc = -EIO; | |
| } else if (rx_databuf == NULL) | |
| rc = -EIO; | |
| else { | |
| rc = IOCB_SUCCESS; | |
| /* skip over elx loopback header */ | |
| rx_databuf += ELX_LOOPBACK_HEADER_SZ; | |
| job->reply->reply_payload_rcv_len = | |
| sg_copy_from_buffer(job->reply_payload.sg_list, | |
| job->reply_payload.sg_cnt, | |
| rx_databuf, size); | |
| job->reply->reply_payload_rcv_len = size; | |
| } | |
| } | |
| err_loopback_test_exit: | |
| lpfcdiag_loop_self_unreg(phba, rpi); | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| lpfc_bsg_event_unref(evt); /* release ref */ | |
| lpfc_bsg_event_unref(evt); /* delete */ | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| if ((cmdiocbq != NULL) && (iocb_stat != IOCB_TIMEDOUT)) | |
| lpfc_sli_release_iocbq(phba, cmdiocbq); | |
| if (rspiocbq != NULL) | |
| lpfc_sli_release_iocbq(phba, rspiocbq); | |
| if (txbmp != NULL) { | |
| if (txbpl != NULL) { | |
| if (txbuffer != NULL) | |
| diag_cmd_data_free(phba, txbuffer); | |
| lpfc_mbuf_free(phba, txbmp->virt, txbmp->phys); | |
| } | |
| kfree(txbmp); | |
| } | |
| loopback_test_exit: | |
| kfree(dataout); | |
| /* make error code available to userspace */ | |
| job->reply->result = rc; | |
| job->dd_data = NULL; | |
| /* complete the job back to userspace if no error */ | |
| if (rc == IOCB_SUCCESS) | |
| job->job_done(job); | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_get_dfc_rev - process a GET_DFC_REV bsg vendor command | |
| * @job: GET_DFC_REV fc_bsg_job | |
| **/ | |
| static int | |
| lpfc_bsg_get_dfc_rev(struct fc_bsg_job *job) | |
| { | |
| struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; | |
| struct lpfc_hba *phba = vport->phba; | |
| struct get_mgmt_rev *event_req; | |
| struct get_mgmt_rev_reply *event_reply; | |
| int rc = 0; | |
| if (job->request_len < | |
| sizeof(struct fc_bsg_request) + sizeof(struct get_mgmt_rev)) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2740 Received GET_DFC_REV request below " | |
| "minimum size\n"); | |
| rc = -EINVAL; | |
| goto job_error; | |
| } | |
| event_req = (struct get_mgmt_rev *) | |
| job->request->rqst_data.h_vendor.vendor_cmd; | |
| event_reply = (struct get_mgmt_rev_reply *) | |
| job->reply->reply_data.vendor_reply.vendor_rsp; | |
| if (job->reply_len < | |
| sizeof(struct fc_bsg_request) + sizeof(struct get_mgmt_rev_reply)) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2741 Received GET_DFC_REV reply below " | |
| "minimum size\n"); | |
| rc = -EINVAL; | |
| goto job_error; | |
| } | |
| event_reply->info.a_Major = MANAGEMENT_MAJOR_REV; | |
| event_reply->info.a_Minor = MANAGEMENT_MINOR_REV; | |
| job_error: | |
| job->reply->result = rc; | |
| if (rc == 0) | |
| job->job_done(job); | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_issue_mbox_cmpl - lpfc_bsg_issue_mbox mbox completion handler | |
| * @phba: Pointer to HBA context object. | |
| * @pmboxq: Pointer to mailbox command. | |
| * | |
| * This is completion handler function for mailbox commands issued from | |
| * lpfc_bsg_issue_mbox function. This function is called by the | |
| * mailbox event handler function with no lock held. This function | |
| * will wake up thread waiting on the wait queue pointed by context1 | |
| * of the mailbox. | |
| **/ | |
| static void | |
| lpfc_bsg_issue_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) | |
| { | |
| struct bsg_job_data *dd_data; | |
| struct fc_bsg_job *job; | |
| uint32_t size; | |
| unsigned long flags; | |
| uint8_t *pmb, *pmb_buf; | |
| dd_data = pmboxq->context1; | |
| /* | |
| * The outgoing buffer is readily referred from the dma buffer, | |
| * just need to get header part from mailboxq structure. | |
| */ | |
| pmb = (uint8_t *)&pmboxq->u.mb; | |
| pmb_buf = (uint8_t *)dd_data->context_un.mbox.mb; | |
| memcpy(pmb_buf, pmb, sizeof(MAILBOX_t)); | |
| /* Determine if job has been aborted */ | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| job = dd_data->set_job; | |
| if (job) { | |
| /* Prevent timeout handling from trying to abort job */ | |
| job->dd_data = NULL; | |
| } | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| /* Copy the mailbox data to the job if it is still active */ | |
| if (job) { | |
| size = job->reply_payload.payload_len; | |
| job->reply->reply_payload_rcv_len = | |
| sg_copy_from_buffer(job->reply_payload.sg_list, | |
| job->reply_payload.sg_cnt, | |
| pmb_buf, size); | |
| } | |
| dd_data->set_job = NULL; | |
| mempool_free(dd_data->context_un.mbox.pmboxq, phba->mbox_mem_pool); | |
| lpfc_bsg_dma_page_free(phba, dd_data->context_un.mbox.dmabuffers); | |
| kfree(dd_data); | |
| /* Complete the job if the job is still active */ | |
| if (job) { | |
| job->reply->result = 0; | |
| job->job_done(job); | |
| } | |
| return; | |
| } | |
| /** | |
| * lpfc_bsg_check_cmd_access - test for a supported mailbox command | |
| * @phba: Pointer to HBA context object. | |
| * @mb: Pointer to a mailbox object. | |
| * @vport: Pointer to a vport object. | |
| * | |
| * Some commands require the port to be offline, some may not be called from | |
| * the application. | |
| **/ | |
| static int lpfc_bsg_check_cmd_access(struct lpfc_hba *phba, | |
| MAILBOX_t *mb, struct lpfc_vport *vport) | |
| { | |
| /* return negative error values for bsg job */ | |
| switch (mb->mbxCommand) { | |
| /* Offline only */ | |
| case MBX_INIT_LINK: | |
| case MBX_DOWN_LINK: | |
| case MBX_CONFIG_LINK: | |
| case MBX_CONFIG_RING: | |
| case MBX_RESET_RING: | |
| case MBX_UNREG_LOGIN: | |
| case MBX_CLEAR_LA: | |
| case MBX_DUMP_CONTEXT: | |
| case MBX_RUN_DIAGS: | |
| case MBX_RESTART: | |
| case MBX_SET_MASK: | |
| if (!(vport->fc_flag & FC_OFFLINE_MODE)) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2743 Command 0x%x is illegal in on-line " | |
| "state\n", | |
| mb->mbxCommand); | |
| return -EPERM; | |
| } | |
| case MBX_WRITE_NV: | |
| case MBX_WRITE_VPARMS: | |
| case MBX_LOAD_SM: | |
| case MBX_READ_NV: | |
| case MBX_READ_CONFIG: | |
| case MBX_READ_RCONFIG: | |
| case MBX_READ_STATUS: | |
| case MBX_READ_XRI: | |
| case MBX_READ_REV: | |
| case MBX_READ_LNK_STAT: | |
| case MBX_DUMP_MEMORY: | |
| case MBX_DOWN_LOAD: | |
| case MBX_UPDATE_CFG: | |
| case MBX_KILL_BOARD: | |
| case MBX_READ_TOPOLOGY: | |
| case MBX_LOAD_AREA: | |
| case MBX_LOAD_EXP_ROM: | |
| case MBX_BEACON: | |
| case MBX_DEL_LD_ENTRY: | |
| case MBX_SET_DEBUG: | |
| case MBX_WRITE_WWN: | |
| case MBX_SLI4_CONFIG: | |
| case MBX_READ_EVENT_LOG: | |
| case MBX_READ_EVENT_LOG_STATUS: | |
| case MBX_WRITE_EVENT_LOG: | |
| case MBX_PORT_CAPABILITIES: | |
| case MBX_PORT_IOV_CONTROL: | |
| case MBX_RUN_BIU_DIAG64: | |
| break; | |
| case MBX_SET_VARIABLE: | |
| lpfc_printf_log(phba, KERN_INFO, LOG_INIT, | |
| "1226 mbox: set_variable 0x%x, 0x%x\n", | |
| mb->un.varWords[0], | |
| mb->un.varWords[1]); | |
| if ((mb->un.varWords[0] == SETVAR_MLOMNT) | |
| && (mb->un.varWords[1] == 1)) { | |
| phba->wait_4_mlo_maint_flg = 1; | |
| } else if (mb->un.varWords[0] == SETVAR_MLORST) { | |
| spin_lock_irq(&phba->hbalock); | |
| phba->link_flag &= ~LS_LOOPBACK_MODE; | |
| spin_unlock_irq(&phba->hbalock); | |
| phba->fc_topology = LPFC_TOPOLOGY_PT_PT; | |
| } | |
| break; | |
| case MBX_READ_SPARM64: | |
| case MBX_REG_LOGIN: | |
| case MBX_REG_LOGIN64: | |
| case MBX_CONFIG_PORT: | |
| case MBX_RUN_BIU_DIAG: | |
| default: | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2742 Unknown Command 0x%x\n", | |
| mb->mbxCommand); | |
| return -EPERM; | |
| } | |
| return 0; /* ok */ | |
| } | |
| /** | |
| * lpfc_bsg_mbox_ext_cleanup - clean up context of multi-buffer mbox session | |
| * @phba: Pointer to HBA context object. | |
| * | |
| * This is routine clean up and reset BSG handling of multi-buffer mbox | |
| * command session. | |
| **/ | |
| static void | |
| lpfc_bsg_mbox_ext_session_reset(struct lpfc_hba *phba) | |
| { | |
| if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_IDLE) | |
| return; | |
| /* free all memory, including dma buffers */ | |
| lpfc_bsg_dma_page_list_free(phba, | |
| &phba->mbox_ext_buf_ctx.ext_dmabuf_list); | |
| lpfc_bsg_dma_page_free(phba, phba->mbox_ext_buf_ctx.mbx_dmabuf); | |
| /* multi-buffer write mailbox command pass-through complete */ | |
| memset((char *)&phba->mbox_ext_buf_ctx, 0, | |
| sizeof(struct lpfc_mbox_ext_buf_ctx)); | |
| INIT_LIST_HEAD(&phba->mbox_ext_buf_ctx.ext_dmabuf_list); | |
| return; | |
| } | |
| /** | |
| * lpfc_bsg_issue_mbox_ext_handle_job - job handler for multi-buffer mbox cmpl | |
| * @phba: Pointer to HBA context object. | |
| * @pmboxq: Pointer to mailbox command. | |
| * | |
| * This is routine handles BSG job for mailbox commands completions with | |
| * multiple external buffers. | |
| **/ | |
| static struct fc_bsg_job * | |
| lpfc_bsg_issue_mbox_ext_handle_job(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) | |
| { | |
| struct bsg_job_data *dd_data; | |
| struct fc_bsg_job *job; | |
| uint8_t *pmb, *pmb_buf; | |
| unsigned long flags; | |
| uint32_t size; | |
| int rc = 0; | |
| struct lpfc_dmabuf *dmabuf; | |
| struct lpfc_sli_config_mbox *sli_cfg_mbx; | |
| uint8_t *pmbx; | |
| dd_data = pmboxq->context1; | |
| /* Determine if job has been aborted */ | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| job = dd_data->set_job; | |
| if (job) { | |
| /* Prevent timeout handling from trying to abort job */ | |
| job->dd_data = NULL; | |
| } | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| /* | |
| * The outgoing buffer is readily referred from the dma buffer, | |
| * just need to get header part from mailboxq structure. | |
| */ | |
| pmb = (uint8_t *)&pmboxq->u.mb; | |
| pmb_buf = (uint8_t *)dd_data->context_un.mbox.mb; | |
| /* Copy the byte swapped response mailbox back to the user */ | |
| memcpy(pmb_buf, pmb, sizeof(MAILBOX_t)); | |
| /* if there is any non-embedded extended data copy that too */ | |
| dmabuf = phba->mbox_ext_buf_ctx.mbx_dmabuf; | |
| sli_cfg_mbx = (struct lpfc_sli_config_mbox *)dmabuf->virt; | |
| if (!bsg_bf_get(lpfc_mbox_hdr_emb, | |
| &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr)) { | |
| pmbx = (uint8_t *)dmabuf->virt; | |
| /* byte swap the extended data following the mailbox command */ | |
| lpfc_sli_pcimem_bcopy(&pmbx[sizeof(MAILBOX_t)], | |
| &pmbx[sizeof(MAILBOX_t)], | |
| sli_cfg_mbx->un.sli_config_emb0_subsys.mse[0].buf_len); | |
| } | |
| /* Complete the job if the job is still active */ | |
| if (job) { | |
| size = job->reply_payload.payload_len; | |
| job->reply->reply_payload_rcv_len = | |
| sg_copy_from_buffer(job->reply_payload.sg_list, | |
| job->reply_payload.sg_cnt, | |
| pmb_buf, size); | |
| /* result for successful */ | |
| job->reply->result = 0; | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2937 SLI_CONFIG ext-buffer maibox command " | |
| "(x%x/x%x) complete bsg job done, bsize:%d\n", | |
| phba->mbox_ext_buf_ctx.nembType, | |
| phba->mbox_ext_buf_ctx.mboxType, size); | |
| lpfc_idiag_mbxacc_dump_bsg_mbox(phba, | |
| phba->mbox_ext_buf_ctx.nembType, | |
| phba->mbox_ext_buf_ctx.mboxType, | |
| dma_ebuf, sta_pos_addr, | |
| phba->mbox_ext_buf_ctx.mbx_dmabuf, 0); | |
| } else { | |
| lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, | |
| "2938 SLI_CONFIG ext-buffer maibox " | |
| "command (x%x/x%x) failure, rc:x%x\n", | |
| phba->mbox_ext_buf_ctx.nembType, | |
| phba->mbox_ext_buf_ctx.mboxType, rc); | |
| } | |
| /* state change */ | |
| phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_DONE; | |
| kfree(dd_data); | |
| return job; | |
| } | |
| /** | |
| * lpfc_bsg_issue_read_mbox_ext_cmpl - compl handler for multi-buffer read mbox | |
| * @phba: Pointer to HBA context object. | |
| * @pmboxq: Pointer to mailbox command. | |
| * | |
| * This is completion handler function for mailbox read commands with multiple | |
| * external buffers. | |
| **/ | |
| static void | |
| lpfc_bsg_issue_read_mbox_ext_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) | |
| { | |
| struct fc_bsg_job *job; | |
| job = lpfc_bsg_issue_mbox_ext_handle_job(phba, pmboxq); | |
| /* handle the BSG job with mailbox command */ | |
| if (!job) | |
| pmboxq->u.mb.mbxStatus = MBXERR_ERROR; | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2939 SLI_CONFIG ext-buffer rd maibox command " | |
| "complete, ctxState:x%x, mbxStatus:x%x\n", | |
| phba->mbox_ext_buf_ctx.state, pmboxq->u.mb.mbxStatus); | |
| if (pmboxq->u.mb.mbxStatus || phba->mbox_ext_buf_ctx.numBuf == 1) | |
| lpfc_bsg_mbox_ext_session_reset(phba); | |
| /* free base driver mailbox structure memory */ | |
| mempool_free(pmboxq, phba->mbox_mem_pool); | |
| /* if the job is still active, call job done */ | |
| if (job) | |
| job->job_done(job); | |
| return; | |
| } | |
| /** | |
| * lpfc_bsg_issue_write_mbox_ext_cmpl - cmpl handler for multi-buffer write mbox | |
| * @phba: Pointer to HBA context object. | |
| * @pmboxq: Pointer to mailbox command. | |
| * | |
| * This is completion handler function for mailbox write commands with multiple | |
| * external buffers. | |
| **/ | |
| static void | |
| lpfc_bsg_issue_write_mbox_ext_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq) | |
| { | |
| struct fc_bsg_job *job; | |
| job = lpfc_bsg_issue_mbox_ext_handle_job(phba, pmboxq); | |
| /* handle the BSG job with the mailbox command */ | |
| if (!job) | |
| pmboxq->u.mb.mbxStatus = MBXERR_ERROR; | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2940 SLI_CONFIG ext-buffer wr maibox command " | |
| "complete, ctxState:x%x, mbxStatus:x%x\n", | |
| phba->mbox_ext_buf_ctx.state, pmboxq->u.mb.mbxStatus); | |
| /* free all memory, including dma buffers */ | |
| mempool_free(pmboxq, phba->mbox_mem_pool); | |
| lpfc_bsg_mbox_ext_session_reset(phba); | |
| /* if the job is still active, call job done */ | |
| if (job) | |
| job->job_done(job); | |
| return; | |
| } | |
| static void | |
| lpfc_bsg_sli_cfg_dma_desc_setup(struct lpfc_hba *phba, enum nemb_type nemb_tp, | |
| uint32_t index, struct lpfc_dmabuf *mbx_dmabuf, | |
| struct lpfc_dmabuf *ext_dmabuf) | |
| { | |
| struct lpfc_sli_config_mbox *sli_cfg_mbx; | |
| /* pointer to the start of mailbox command */ | |
| sli_cfg_mbx = (struct lpfc_sli_config_mbox *)mbx_dmabuf->virt; | |
| if (nemb_tp == nemb_mse) { | |
| if (index == 0) { | |
| sli_cfg_mbx->un.sli_config_emb0_subsys. | |
| mse[index].pa_hi = | |
| putPaddrHigh(mbx_dmabuf->phys + | |
| sizeof(MAILBOX_t)); | |
| sli_cfg_mbx->un.sli_config_emb0_subsys. | |
| mse[index].pa_lo = | |
| putPaddrLow(mbx_dmabuf->phys + | |
| sizeof(MAILBOX_t)); | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2943 SLI_CONFIG(mse)[%d], " | |
| "bufLen:%d, addrHi:x%x, addrLo:x%x\n", | |
| index, | |
| sli_cfg_mbx->un.sli_config_emb0_subsys. | |
| mse[index].buf_len, | |
| sli_cfg_mbx->un.sli_config_emb0_subsys. | |
| mse[index].pa_hi, | |
| sli_cfg_mbx->un.sli_config_emb0_subsys. | |
| mse[index].pa_lo); | |
| } else { | |
| sli_cfg_mbx->un.sli_config_emb0_subsys. | |
| mse[index].pa_hi = | |
| putPaddrHigh(ext_dmabuf->phys); | |
| sli_cfg_mbx->un.sli_config_emb0_subsys. | |
| mse[index].pa_lo = | |
| putPaddrLow(ext_dmabuf->phys); | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2944 SLI_CONFIG(mse)[%d], " | |
| "bufLen:%d, addrHi:x%x, addrLo:x%x\n", | |
| index, | |
| sli_cfg_mbx->un.sli_config_emb0_subsys. | |
| mse[index].buf_len, | |
| sli_cfg_mbx->un.sli_config_emb0_subsys. | |
| mse[index].pa_hi, | |
| sli_cfg_mbx->un.sli_config_emb0_subsys. | |
| mse[index].pa_lo); | |
| } | |
| } else { | |
| if (index == 0) { | |
| sli_cfg_mbx->un.sli_config_emb1_subsys. | |
| hbd[index].pa_hi = | |
| putPaddrHigh(mbx_dmabuf->phys + | |
| sizeof(MAILBOX_t)); | |
| sli_cfg_mbx->un.sli_config_emb1_subsys. | |
| hbd[index].pa_lo = | |
| putPaddrLow(mbx_dmabuf->phys + | |
| sizeof(MAILBOX_t)); | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "3007 SLI_CONFIG(hbd)[%d], " | |
| "bufLen:%d, addrHi:x%x, addrLo:x%x\n", | |
| index, | |
| bsg_bf_get(lpfc_mbox_sli_config_ecmn_hbd_len, | |
| &sli_cfg_mbx->un. | |
| sli_config_emb1_subsys.hbd[index]), | |
| sli_cfg_mbx->un.sli_config_emb1_subsys. | |
| hbd[index].pa_hi, | |
| sli_cfg_mbx->un.sli_config_emb1_subsys. | |
| hbd[index].pa_lo); | |
| } else { | |
| sli_cfg_mbx->un.sli_config_emb1_subsys. | |
| hbd[index].pa_hi = | |
| putPaddrHigh(ext_dmabuf->phys); | |
| sli_cfg_mbx->un.sli_config_emb1_subsys. | |
| hbd[index].pa_lo = | |
| putPaddrLow(ext_dmabuf->phys); | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "3008 SLI_CONFIG(hbd)[%d], " | |
| "bufLen:%d, addrHi:x%x, addrLo:x%x\n", | |
| index, | |
| bsg_bf_get(lpfc_mbox_sli_config_ecmn_hbd_len, | |
| &sli_cfg_mbx->un. | |
| sli_config_emb1_subsys.hbd[index]), | |
| sli_cfg_mbx->un.sli_config_emb1_subsys. | |
| hbd[index].pa_hi, | |
| sli_cfg_mbx->un.sli_config_emb1_subsys. | |
| hbd[index].pa_lo); | |
| } | |
| } | |
| return; | |
| } | |
| /** | |
| * lpfc_bsg_sli_cfg_mse_read_cmd_ext - sli_config non-embedded mailbox cmd read | |
| * @phba: Pointer to HBA context object. | |
| * @mb: Pointer to a BSG mailbox object. | |
| * @nemb_tp: Enumerate of non-embedded mailbox command type. | |
| * @dmabuff: Pointer to a DMA buffer descriptor. | |
| * | |
| * This routine performs SLI_CONFIG (0x9B) read mailbox command operation with | |
| * non-embedded external bufffers. | |
| **/ | |
| static int | |
| lpfc_bsg_sli_cfg_read_cmd_ext(struct lpfc_hba *phba, struct fc_bsg_job *job, | |
| enum nemb_type nemb_tp, | |
| struct lpfc_dmabuf *dmabuf) | |
| { | |
| struct lpfc_sli_config_mbox *sli_cfg_mbx; | |
| struct dfc_mbox_req *mbox_req; | |
| struct lpfc_dmabuf *curr_dmabuf, *next_dmabuf; | |
| uint32_t ext_buf_cnt, ext_buf_index; | |
| struct lpfc_dmabuf *ext_dmabuf = NULL; | |
| struct bsg_job_data *dd_data = NULL; | |
| LPFC_MBOXQ_t *pmboxq = NULL; | |
| MAILBOX_t *pmb; | |
| uint8_t *pmbx; | |
| int rc, i; | |
| mbox_req = | |
| (struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd; | |
| /* pointer to the start of mailbox command */ | |
| sli_cfg_mbx = (struct lpfc_sli_config_mbox *)dmabuf->virt; | |
| if (nemb_tp == nemb_mse) { | |
| ext_buf_cnt = bsg_bf_get(lpfc_mbox_hdr_mse_cnt, | |
| &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr); | |
| if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_MSE) { | |
| lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, | |
| "2945 Handled SLI_CONFIG(mse) rd, " | |
| "ext_buf_cnt(%d) out of range(%d)\n", | |
| ext_buf_cnt, | |
| LPFC_MBX_SLI_CONFIG_MAX_MSE); | |
| rc = -ERANGE; | |
| goto job_error; | |
| } | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2941 Handled SLI_CONFIG(mse) rd, " | |
| "ext_buf_cnt:%d\n", ext_buf_cnt); | |
| } else { | |
| /* sanity check on interface type for support */ | |
| if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != | |
| LPFC_SLI_INTF_IF_TYPE_2) { | |
| rc = -ENODEV; | |
| goto job_error; | |
| } | |
| /* nemb_tp == nemb_hbd */ | |
| ext_buf_cnt = sli_cfg_mbx->un.sli_config_emb1_subsys.hbd_count; | |
| if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_HBD) { | |
| lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, | |
| "2946 Handled SLI_CONFIG(hbd) rd, " | |
| "ext_buf_cnt(%d) out of range(%d)\n", | |
| ext_buf_cnt, | |
| LPFC_MBX_SLI_CONFIG_MAX_HBD); | |
| rc = -ERANGE; | |
| goto job_error; | |
| } | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2942 Handled SLI_CONFIG(hbd) rd, " | |
| "ext_buf_cnt:%d\n", ext_buf_cnt); | |
| } | |
| /* before dma descriptor setup */ | |
| lpfc_idiag_mbxacc_dump_bsg_mbox(phba, nemb_tp, mbox_rd, dma_mbox, | |
| sta_pre_addr, dmabuf, ext_buf_cnt); | |
| /* reject non-embedded mailbox command with none external buffer */ | |
| if (ext_buf_cnt == 0) { | |
| rc = -EPERM; | |
| goto job_error; | |
| } else if (ext_buf_cnt > 1) { | |
| /* additional external read buffers */ | |
| for (i = 1; i < ext_buf_cnt; i++) { | |
| ext_dmabuf = lpfc_bsg_dma_page_alloc(phba); | |
| if (!ext_dmabuf) { | |
| rc = -ENOMEM; | |
| goto job_error; | |
| } | |
| list_add_tail(&ext_dmabuf->list, | |
| &phba->mbox_ext_buf_ctx.ext_dmabuf_list); | |
| } | |
| } | |
| /* bsg tracking structure */ | |
| dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); | |
| if (!dd_data) { | |
| rc = -ENOMEM; | |
| goto job_error; | |
| } | |
| /* mailbox command structure for base driver */ | |
| pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | |
| if (!pmboxq) { | |
| rc = -ENOMEM; | |
| goto job_error; | |
| } | |
| memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); | |
| /* for the first external buffer */ | |
| lpfc_bsg_sli_cfg_dma_desc_setup(phba, nemb_tp, 0, dmabuf, dmabuf); | |
| /* for the rest of external buffer descriptors if any */ | |
| if (ext_buf_cnt > 1) { | |
| ext_buf_index = 1; | |
| list_for_each_entry_safe(curr_dmabuf, next_dmabuf, | |
| &phba->mbox_ext_buf_ctx.ext_dmabuf_list, list) { | |
| lpfc_bsg_sli_cfg_dma_desc_setup(phba, nemb_tp, | |
| ext_buf_index, dmabuf, | |
| curr_dmabuf); | |
| ext_buf_index++; | |
| } | |
| } | |
| /* after dma descriptor setup */ | |
| lpfc_idiag_mbxacc_dump_bsg_mbox(phba, nemb_tp, mbox_rd, dma_mbox, | |
| sta_pos_addr, dmabuf, ext_buf_cnt); | |
| /* construct base driver mbox command */ | |
| pmb = &pmboxq->u.mb; | |
| pmbx = (uint8_t *)dmabuf->virt; | |
| memcpy(pmb, pmbx, sizeof(*pmb)); | |
| pmb->mbxOwner = OWN_HOST; | |
| pmboxq->vport = phba->pport; | |
| /* multi-buffer handling context */ | |
| phba->mbox_ext_buf_ctx.nembType = nemb_tp; | |
| phba->mbox_ext_buf_ctx.mboxType = mbox_rd; | |
| phba->mbox_ext_buf_ctx.numBuf = ext_buf_cnt; | |
| phba->mbox_ext_buf_ctx.mbxTag = mbox_req->extMboxTag; | |
| phba->mbox_ext_buf_ctx.seqNum = mbox_req->extSeqNum; | |
| phba->mbox_ext_buf_ctx.mbx_dmabuf = dmabuf; | |
| /* callback for multi-buffer read mailbox command */ | |
| pmboxq->mbox_cmpl = lpfc_bsg_issue_read_mbox_ext_cmpl; | |
| /* context fields to callback function */ | |
| pmboxq->context1 = dd_data; | |
| dd_data->type = TYPE_MBOX; | |
| dd_data->set_job = job; | |
| dd_data->context_un.mbox.pmboxq = pmboxq; | |
| dd_data->context_un.mbox.mb = (MAILBOX_t *)pmbx; | |
| job->dd_data = dd_data; | |
| /* state change */ | |
| phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_PORT; | |
| /* | |
| * Non-embedded mailbox subcommand data gets byte swapped here because | |
| * the lower level driver code only does the first 64 mailbox words. | |
| */ | |
| if ((!bsg_bf_get(lpfc_mbox_hdr_emb, | |
| &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr)) && | |
| (nemb_tp == nemb_mse)) | |
| lpfc_sli_pcimem_bcopy(&pmbx[sizeof(MAILBOX_t)], | |
| &pmbx[sizeof(MAILBOX_t)], | |
| sli_cfg_mbx->un.sli_config_emb0_subsys. | |
| mse[0].buf_len); | |
| rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); | |
| if ((rc == MBX_SUCCESS) || (rc == MBX_BUSY)) { | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2947 Issued SLI_CONFIG ext-buffer " | |
| "maibox command, rc:x%x\n", rc); | |
| return SLI_CONFIG_HANDLED; | |
| } | |
| lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, | |
| "2948 Failed to issue SLI_CONFIG ext-buffer " | |
| "maibox command, rc:x%x\n", rc); | |
| rc = -EPIPE; | |
| job_error: | |
| if (pmboxq) | |
| mempool_free(pmboxq, phba->mbox_mem_pool); | |
| lpfc_bsg_dma_page_list_free(phba, | |
| &phba->mbox_ext_buf_ctx.ext_dmabuf_list); | |
| kfree(dd_data); | |
| phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_IDLE; | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_sli_cfg_write_cmd_ext - sli_config non-embedded mailbox cmd write | |
| * @phba: Pointer to HBA context object. | |
| * @mb: Pointer to a BSG mailbox object. | |
| * @dmabuff: Pointer to a DMA buffer descriptor. | |
| * | |
| * This routine performs SLI_CONFIG (0x9B) write mailbox command operation with | |
| * non-embedded external bufffers. | |
| **/ | |
| static int | |
| lpfc_bsg_sli_cfg_write_cmd_ext(struct lpfc_hba *phba, struct fc_bsg_job *job, | |
| enum nemb_type nemb_tp, | |
| struct lpfc_dmabuf *dmabuf) | |
| { | |
| struct dfc_mbox_req *mbox_req; | |
| struct lpfc_sli_config_mbox *sli_cfg_mbx; | |
| uint32_t ext_buf_cnt; | |
| struct bsg_job_data *dd_data = NULL; | |
| LPFC_MBOXQ_t *pmboxq = NULL; | |
| MAILBOX_t *pmb; | |
| uint8_t *mbx; | |
| int rc = SLI_CONFIG_NOT_HANDLED, i; | |
| mbox_req = | |
| (struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd; | |
| /* pointer to the start of mailbox command */ | |
| sli_cfg_mbx = (struct lpfc_sli_config_mbox *)dmabuf->virt; | |
| if (nemb_tp == nemb_mse) { | |
| ext_buf_cnt = bsg_bf_get(lpfc_mbox_hdr_mse_cnt, | |
| &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr); | |
| if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_MSE) { | |
| lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, | |
| "2953 Failed SLI_CONFIG(mse) wr, " | |
| "ext_buf_cnt(%d) out of range(%d)\n", | |
| ext_buf_cnt, | |
| LPFC_MBX_SLI_CONFIG_MAX_MSE); | |
| return -ERANGE; | |
| } | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2949 Handled SLI_CONFIG(mse) wr, " | |
| "ext_buf_cnt:%d\n", ext_buf_cnt); | |
| } else { | |
| /* sanity check on interface type for support */ | |
| if (bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf) != | |
| LPFC_SLI_INTF_IF_TYPE_2) | |
| return -ENODEV; | |
| /* nemb_tp == nemb_hbd */ | |
| ext_buf_cnt = sli_cfg_mbx->un.sli_config_emb1_subsys.hbd_count; | |
| if (ext_buf_cnt > LPFC_MBX_SLI_CONFIG_MAX_HBD) { | |
| lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, | |
| "2954 Failed SLI_CONFIG(hbd) wr, " | |
| "ext_buf_cnt(%d) out of range(%d)\n", | |
| ext_buf_cnt, | |
| LPFC_MBX_SLI_CONFIG_MAX_HBD); | |
| return -ERANGE; | |
| } | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2950 Handled SLI_CONFIG(hbd) wr, " | |
| "ext_buf_cnt:%d\n", ext_buf_cnt); | |
| } | |
| /* before dma buffer descriptor setup */ | |
| lpfc_idiag_mbxacc_dump_bsg_mbox(phba, nemb_tp, mbox_wr, dma_mbox, | |
| sta_pre_addr, dmabuf, ext_buf_cnt); | |
| if (ext_buf_cnt == 0) | |
| return -EPERM; | |
| /* for the first external buffer */ | |
| lpfc_bsg_sli_cfg_dma_desc_setup(phba, nemb_tp, 0, dmabuf, dmabuf); | |
| /* after dma descriptor setup */ | |
| lpfc_idiag_mbxacc_dump_bsg_mbox(phba, nemb_tp, mbox_wr, dma_mbox, | |
| sta_pos_addr, dmabuf, ext_buf_cnt); | |
| /* log for looking forward */ | |
| for (i = 1; i < ext_buf_cnt; i++) { | |
| if (nemb_tp == nemb_mse) | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2951 SLI_CONFIG(mse), buf[%d]-length:%d\n", | |
| i, sli_cfg_mbx->un.sli_config_emb0_subsys. | |
| mse[i].buf_len); | |
| else | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2952 SLI_CONFIG(hbd), buf[%d]-length:%d\n", | |
| i, bsg_bf_get(lpfc_mbox_sli_config_ecmn_hbd_len, | |
| &sli_cfg_mbx->un.sli_config_emb1_subsys. | |
| hbd[i])); | |
| } | |
| /* multi-buffer handling context */ | |
| phba->mbox_ext_buf_ctx.nembType = nemb_tp; | |
| phba->mbox_ext_buf_ctx.mboxType = mbox_wr; | |
| phba->mbox_ext_buf_ctx.numBuf = ext_buf_cnt; | |
| phba->mbox_ext_buf_ctx.mbxTag = mbox_req->extMboxTag; | |
| phba->mbox_ext_buf_ctx.seqNum = mbox_req->extSeqNum; | |
| phba->mbox_ext_buf_ctx.mbx_dmabuf = dmabuf; | |
| if (ext_buf_cnt == 1) { | |
| /* bsg tracking structure */ | |
| dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); | |
| if (!dd_data) { | |
| rc = -ENOMEM; | |
| goto job_error; | |
| } | |
| /* mailbox command structure for base driver */ | |
| pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | |
| if (!pmboxq) { | |
| rc = -ENOMEM; | |
| goto job_error; | |
| } | |
| memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); | |
| pmb = &pmboxq->u.mb; | |
| mbx = (uint8_t *)dmabuf->virt; | |
| memcpy(pmb, mbx, sizeof(*pmb)); | |
| pmb->mbxOwner = OWN_HOST; | |
| pmboxq->vport = phba->pport; | |
| /* callback for multi-buffer read mailbox command */ | |
| pmboxq->mbox_cmpl = lpfc_bsg_issue_write_mbox_ext_cmpl; | |
| /* context fields to callback function */ | |
| pmboxq->context1 = dd_data; | |
| dd_data->type = TYPE_MBOX; | |
| dd_data->set_job = job; | |
| dd_data->context_un.mbox.pmboxq = pmboxq; | |
| dd_data->context_un.mbox.mb = (MAILBOX_t *)mbx; | |
| job->dd_data = dd_data; | |
| /* state change */ | |
| phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_PORT; | |
| rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); | |
| if ((rc == MBX_SUCCESS) || (rc == MBX_BUSY)) { | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2955 Issued SLI_CONFIG ext-buffer " | |
| "maibox command, rc:x%x\n", rc); | |
| return SLI_CONFIG_HANDLED; | |
| } | |
| lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, | |
| "2956 Failed to issue SLI_CONFIG ext-buffer " | |
| "maibox command, rc:x%x\n", rc); | |
| rc = -EPIPE; | |
| goto job_error; | |
| } | |
| /* wait for additoinal external buffers */ | |
| job->reply->result = 0; | |
| job->job_done(job); | |
| return SLI_CONFIG_HANDLED; | |
| job_error: | |
| if (pmboxq) | |
| mempool_free(pmboxq, phba->mbox_mem_pool); | |
| kfree(dd_data); | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_handle_sli_cfg_mbox - handle sli-cfg mailbox cmd with ext buffer | |
| * @phba: Pointer to HBA context object. | |
| * @mb: Pointer to a BSG mailbox object. | |
| * @dmabuff: Pointer to a DMA buffer descriptor. | |
| * | |
| * This routine handles SLI_CONFIG (0x9B) mailbox command with non-embedded | |
| * external bufffers, including both 0x9B with non-embedded MSEs and 0x9B | |
| * with embedded sussystem 0x1 and opcodes with external HBDs. | |
| **/ | |
| static int | |
| lpfc_bsg_handle_sli_cfg_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, | |
| struct lpfc_dmabuf *dmabuf) | |
| { | |
| struct lpfc_sli_config_mbox *sli_cfg_mbx; | |
| uint32_t subsys; | |
| uint32_t opcode; | |
| int rc = SLI_CONFIG_NOT_HANDLED; | |
| /* state change on new multi-buffer pass-through mailbox command */ | |
| phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_HOST; | |
| sli_cfg_mbx = (struct lpfc_sli_config_mbox *)dmabuf->virt; | |
| if (!bsg_bf_get(lpfc_mbox_hdr_emb, | |
| &sli_cfg_mbx->un.sli_config_emb0_subsys.sli_config_hdr)) { | |
| subsys = bsg_bf_get(lpfc_emb0_subcmnd_subsys, | |
| &sli_cfg_mbx->un.sli_config_emb0_subsys); | |
| opcode = bsg_bf_get(lpfc_emb0_subcmnd_opcode, | |
| &sli_cfg_mbx->un.sli_config_emb0_subsys); | |
| if (subsys == SLI_CONFIG_SUBSYS_FCOE) { | |
| switch (opcode) { | |
| case FCOE_OPCODE_READ_FCF: | |
| case FCOE_OPCODE_GET_DPORT_RESULTS: | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2957 Handled SLI_CONFIG " | |
| "subsys_fcoe, opcode:x%x\n", | |
| opcode); | |
| rc = lpfc_bsg_sli_cfg_read_cmd_ext(phba, job, | |
| nemb_mse, dmabuf); | |
| break; | |
| case FCOE_OPCODE_ADD_FCF: | |
| case FCOE_OPCODE_SET_DPORT_MODE: | |
| case LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE: | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2958 Handled SLI_CONFIG " | |
| "subsys_fcoe, opcode:x%x\n", | |
| opcode); | |
| rc = lpfc_bsg_sli_cfg_write_cmd_ext(phba, job, | |
| nemb_mse, dmabuf); | |
| break; | |
| default: | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2959 Reject SLI_CONFIG " | |
| "subsys_fcoe, opcode:x%x\n", | |
| opcode); | |
| rc = -EPERM; | |
| break; | |
| } | |
| } else if (subsys == SLI_CONFIG_SUBSYS_COMN) { | |
| switch (opcode) { | |
| case COMN_OPCODE_GET_CNTL_ADDL_ATTRIBUTES: | |
| case COMN_OPCODE_GET_CNTL_ATTRIBUTES: | |
| case COMN_OPCODE_GET_PROFILE_CONFIG: | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "3106 Handled SLI_CONFIG " | |
| "subsys_comn, opcode:x%x\n", | |
| opcode); | |
| rc = lpfc_bsg_sli_cfg_read_cmd_ext(phba, job, | |
| nemb_mse, dmabuf); | |
| break; | |
| default: | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "3107 Reject SLI_CONFIG " | |
| "subsys_comn, opcode:x%x\n", | |
| opcode); | |
| rc = -EPERM; | |
| break; | |
| } | |
| } else { | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2977 Reject SLI_CONFIG " | |
| "subsys:x%d, opcode:x%x\n", | |
| subsys, opcode); | |
| rc = -EPERM; | |
| } | |
| } else { | |
| subsys = bsg_bf_get(lpfc_emb1_subcmnd_subsys, | |
| &sli_cfg_mbx->un.sli_config_emb1_subsys); | |
| opcode = bsg_bf_get(lpfc_emb1_subcmnd_opcode, | |
| &sli_cfg_mbx->un.sli_config_emb1_subsys); | |
| if (subsys == SLI_CONFIG_SUBSYS_COMN) { | |
| switch (opcode) { | |
| case COMN_OPCODE_READ_OBJECT: | |
| case COMN_OPCODE_READ_OBJECT_LIST: | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2960 Handled SLI_CONFIG " | |
| "subsys_comn, opcode:x%x\n", | |
| opcode); | |
| rc = lpfc_bsg_sli_cfg_read_cmd_ext(phba, job, | |
| nemb_hbd, dmabuf); | |
| break; | |
| case COMN_OPCODE_WRITE_OBJECT: | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2961 Handled SLI_CONFIG " | |
| "subsys_comn, opcode:x%x\n", | |
| opcode); | |
| rc = lpfc_bsg_sli_cfg_write_cmd_ext(phba, job, | |
| nemb_hbd, dmabuf); | |
| break; | |
| default: | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2962 Not handled SLI_CONFIG " | |
| "subsys_comn, opcode:x%x\n", | |
| opcode); | |
| rc = SLI_CONFIG_NOT_HANDLED; | |
| break; | |
| } | |
| } else { | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2978 Not handled SLI_CONFIG " | |
| "subsys:x%d, opcode:x%x\n", | |
| subsys, opcode); | |
| rc = SLI_CONFIG_NOT_HANDLED; | |
| } | |
| } | |
| /* state reset on not handled new multi-buffer mailbox command */ | |
| if (rc != SLI_CONFIG_HANDLED) | |
| phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_IDLE; | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_mbox_ext_abort_req - request to abort mbox command with ext buffers | |
| * @phba: Pointer to HBA context object. | |
| * | |
| * This routine is for requesting to abort a pass-through mailbox command with | |
| * multiple external buffers due to error condition. | |
| **/ | |
| static void | |
| lpfc_bsg_mbox_ext_abort(struct lpfc_hba *phba) | |
| { | |
| if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_PORT) | |
| phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_ABTS; | |
| else | |
| lpfc_bsg_mbox_ext_session_reset(phba); | |
| return; | |
| } | |
| /** | |
| * lpfc_bsg_read_ebuf_get - get the next mailbox read external buffer | |
| * @phba: Pointer to HBA context object. | |
| * @dmabuf: Pointer to a DMA buffer descriptor. | |
| * | |
| * This routine extracts the next mailbox read external buffer back to | |
| * user space through BSG. | |
| **/ | |
| static int | |
| lpfc_bsg_read_ebuf_get(struct lpfc_hba *phba, struct fc_bsg_job *job) | |
| { | |
| struct lpfc_sli_config_mbox *sli_cfg_mbx; | |
| struct lpfc_dmabuf *dmabuf; | |
| uint8_t *pbuf; | |
| uint32_t size; | |
| uint32_t index; | |
| index = phba->mbox_ext_buf_ctx.seqNum; | |
| phba->mbox_ext_buf_ctx.seqNum++; | |
| sli_cfg_mbx = (struct lpfc_sli_config_mbox *) | |
| phba->mbox_ext_buf_ctx.mbx_dmabuf->virt; | |
| if (phba->mbox_ext_buf_ctx.nembType == nemb_mse) { | |
| size = bsg_bf_get(lpfc_mbox_sli_config_mse_len, | |
| &sli_cfg_mbx->un.sli_config_emb0_subsys.mse[index]); | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2963 SLI_CONFIG (mse) ext-buffer rd get " | |
| "buffer[%d], size:%d\n", index, size); | |
| } else { | |
| size = bsg_bf_get(lpfc_mbox_sli_config_ecmn_hbd_len, | |
| &sli_cfg_mbx->un.sli_config_emb1_subsys.hbd[index]); | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2964 SLI_CONFIG (hbd) ext-buffer rd get " | |
| "buffer[%d], size:%d\n", index, size); | |
| } | |
| if (list_empty(&phba->mbox_ext_buf_ctx.ext_dmabuf_list)) | |
| return -EPIPE; | |
| dmabuf = list_first_entry(&phba->mbox_ext_buf_ctx.ext_dmabuf_list, | |
| struct lpfc_dmabuf, list); | |
| list_del_init(&dmabuf->list); | |
| /* after dma buffer descriptor setup */ | |
| lpfc_idiag_mbxacc_dump_bsg_mbox(phba, phba->mbox_ext_buf_ctx.nembType, | |
| mbox_rd, dma_ebuf, sta_pos_addr, | |
| dmabuf, index); | |
| pbuf = (uint8_t *)dmabuf->virt; | |
| job->reply->reply_payload_rcv_len = | |
| sg_copy_from_buffer(job->reply_payload.sg_list, | |
| job->reply_payload.sg_cnt, | |
| pbuf, size); | |
| lpfc_bsg_dma_page_free(phba, dmabuf); | |
| if (phba->mbox_ext_buf_ctx.seqNum == phba->mbox_ext_buf_ctx.numBuf) { | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2965 SLI_CONFIG (hbd) ext-buffer rd mbox " | |
| "command session done\n"); | |
| lpfc_bsg_mbox_ext_session_reset(phba); | |
| } | |
| job->reply->result = 0; | |
| job->job_done(job); | |
| return SLI_CONFIG_HANDLED; | |
| } | |
| /** | |
| * lpfc_bsg_write_ebuf_set - set the next mailbox write external buffer | |
| * @phba: Pointer to HBA context object. | |
| * @dmabuf: Pointer to a DMA buffer descriptor. | |
| * | |
| * This routine sets up the next mailbox read external buffer obtained | |
| * from user space through BSG. | |
| **/ | |
| static int | |
| lpfc_bsg_write_ebuf_set(struct lpfc_hba *phba, struct fc_bsg_job *job, | |
| struct lpfc_dmabuf *dmabuf) | |
| { | |
| struct lpfc_sli_config_mbox *sli_cfg_mbx; | |
| struct bsg_job_data *dd_data = NULL; | |
| LPFC_MBOXQ_t *pmboxq = NULL; | |
| MAILBOX_t *pmb; | |
| enum nemb_type nemb_tp; | |
| uint8_t *pbuf; | |
| uint32_t size; | |
| uint32_t index; | |
| int rc; | |
| index = phba->mbox_ext_buf_ctx.seqNum; | |
| phba->mbox_ext_buf_ctx.seqNum++; | |
| nemb_tp = phba->mbox_ext_buf_ctx.nembType; | |
| sli_cfg_mbx = (struct lpfc_sli_config_mbox *) | |
| phba->mbox_ext_buf_ctx.mbx_dmabuf->virt; | |
| dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); | |
| if (!dd_data) { | |
| rc = -ENOMEM; | |
| goto job_error; | |
| } | |
| pbuf = (uint8_t *)dmabuf->virt; | |
| size = job->request_payload.payload_len; | |
| sg_copy_to_buffer(job->request_payload.sg_list, | |
| job->request_payload.sg_cnt, | |
| pbuf, size); | |
| if (phba->mbox_ext_buf_ctx.nembType == nemb_mse) { | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2966 SLI_CONFIG (mse) ext-buffer wr set " | |
| "buffer[%d], size:%d\n", | |
| phba->mbox_ext_buf_ctx.seqNum, size); | |
| } else { | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2967 SLI_CONFIG (hbd) ext-buffer wr set " | |
| "buffer[%d], size:%d\n", | |
| phba->mbox_ext_buf_ctx.seqNum, size); | |
| } | |
| /* set up external buffer descriptor and add to external buffer list */ | |
| lpfc_bsg_sli_cfg_dma_desc_setup(phba, nemb_tp, index, | |
| phba->mbox_ext_buf_ctx.mbx_dmabuf, | |
| dmabuf); | |
| list_add_tail(&dmabuf->list, &phba->mbox_ext_buf_ctx.ext_dmabuf_list); | |
| /* after write dma buffer */ | |
| lpfc_idiag_mbxacc_dump_bsg_mbox(phba, phba->mbox_ext_buf_ctx.nembType, | |
| mbox_wr, dma_ebuf, sta_pos_addr, | |
| dmabuf, index); | |
| if (phba->mbox_ext_buf_ctx.seqNum == phba->mbox_ext_buf_ctx.numBuf) { | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2968 SLI_CONFIG ext-buffer wr all %d " | |
| "ebuffers received\n", | |
| phba->mbox_ext_buf_ctx.numBuf); | |
| /* mailbox command structure for base driver */ | |
| pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | |
| if (!pmboxq) { | |
| rc = -ENOMEM; | |
| goto job_error; | |
| } | |
| memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); | |
| pbuf = (uint8_t *)phba->mbox_ext_buf_ctx.mbx_dmabuf->virt; | |
| pmb = &pmboxq->u.mb; | |
| memcpy(pmb, pbuf, sizeof(*pmb)); | |
| pmb->mbxOwner = OWN_HOST; | |
| pmboxq->vport = phba->pport; | |
| /* callback for multi-buffer write mailbox command */ | |
| pmboxq->mbox_cmpl = lpfc_bsg_issue_write_mbox_ext_cmpl; | |
| /* context fields to callback function */ | |
| pmboxq->context1 = dd_data; | |
| dd_data->type = TYPE_MBOX; | |
| dd_data->set_job = job; | |
| dd_data->context_un.mbox.pmboxq = pmboxq; | |
| dd_data->context_un.mbox.mb = (MAILBOX_t *)pbuf; | |
| job->dd_data = dd_data; | |
| /* state change */ | |
| phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_PORT; | |
| rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); | |
| if ((rc == MBX_SUCCESS) || (rc == MBX_BUSY)) { | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2969 Issued SLI_CONFIG ext-buffer " | |
| "maibox command, rc:x%x\n", rc); | |
| return SLI_CONFIG_HANDLED; | |
| } | |
| lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, | |
| "2970 Failed to issue SLI_CONFIG ext-buffer " | |
| "maibox command, rc:x%x\n", rc); | |
| rc = -EPIPE; | |
| goto job_error; | |
| } | |
| /* wait for additoinal external buffers */ | |
| job->reply->result = 0; | |
| job->job_done(job); | |
| return SLI_CONFIG_HANDLED; | |
| job_error: | |
| lpfc_bsg_dma_page_free(phba, dmabuf); | |
| kfree(dd_data); | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_handle_sli_cfg_ebuf - handle ext buffer with sli-cfg mailbox cmd | |
| * @phba: Pointer to HBA context object. | |
| * @mb: Pointer to a BSG mailbox object. | |
| * @dmabuff: Pointer to a DMA buffer descriptor. | |
| * | |
| * This routine handles the external buffer with SLI_CONFIG (0x9B) mailbox | |
| * command with multiple non-embedded external buffers. | |
| **/ | |
| static int | |
| lpfc_bsg_handle_sli_cfg_ebuf(struct lpfc_hba *phba, struct fc_bsg_job *job, | |
| struct lpfc_dmabuf *dmabuf) | |
| { | |
| int rc; | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2971 SLI_CONFIG buffer (type:x%x)\n", | |
| phba->mbox_ext_buf_ctx.mboxType); | |
| if (phba->mbox_ext_buf_ctx.mboxType == mbox_rd) { | |
| if (phba->mbox_ext_buf_ctx.state != LPFC_BSG_MBOX_DONE) { | |
| lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, | |
| "2972 SLI_CONFIG rd buffer state " | |
| "mismatch:x%x\n", | |
| phba->mbox_ext_buf_ctx.state); | |
| lpfc_bsg_mbox_ext_abort(phba); | |
| return -EPIPE; | |
| } | |
| rc = lpfc_bsg_read_ebuf_get(phba, job); | |
| if (rc == SLI_CONFIG_HANDLED) | |
| lpfc_bsg_dma_page_free(phba, dmabuf); | |
| } else { /* phba->mbox_ext_buf_ctx.mboxType == mbox_wr */ | |
| if (phba->mbox_ext_buf_ctx.state != LPFC_BSG_MBOX_HOST) { | |
| lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, | |
| "2973 SLI_CONFIG wr buffer state " | |
| "mismatch:x%x\n", | |
| phba->mbox_ext_buf_ctx.state); | |
| lpfc_bsg_mbox_ext_abort(phba); | |
| return -EPIPE; | |
| } | |
| rc = lpfc_bsg_write_ebuf_set(phba, job, dmabuf); | |
| } | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_handle_sli_cfg_ext - handle sli-cfg mailbox with external buffer | |
| * @phba: Pointer to HBA context object. | |
| * @mb: Pointer to a BSG mailbox object. | |
| * @dmabuff: Pointer to a DMA buffer descriptor. | |
| * | |
| * This routine checkes and handles non-embedded multi-buffer SLI_CONFIG | |
| * (0x9B) mailbox commands and external buffers. | |
| **/ | |
| static int | |
| lpfc_bsg_handle_sli_cfg_ext(struct lpfc_hba *phba, struct fc_bsg_job *job, | |
| struct lpfc_dmabuf *dmabuf) | |
| { | |
| struct dfc_mbox_req *mbox_req; | |
| int rc = SLI_CONFIG_NOT_HANDLED; | |
| mbox_req = | |
| (struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd; | |
| /* mbox command with/without single external buffer */ | |
| if (mbox_req->extMboxTag == 0 && mbox_req->extSeqNum == 0) | |
| return rc; | |
| /* mbox command and first external buffer */ | |
| if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_IDLE) { | |
| if (mbox_req->extSeqNum == 1) { | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2974 SLI_CONFIG mailbox: tag:%d, " | |
| "seq:%d\n", mbox_req->extMboxTag, | |
| mbox_req->extSeqNum); | |
| rc = lpfc_bsg_handle_sli_cfg_mbox(phba, job, dmabuf); | |
| return rc; | |
| } else | |
| goto sli_cfg_ext_error; | |
| } | |
| /* | |
| * handle additional external buffers | |
| */ | |
| /* check broken pipe conditions */ | |
| if (mbox_req->extMboxTag != phba->mbox_ext_buf_ctx.mbxTag) | |
| goto sli_cfg_ext_error; | |
| if (mbox_req->extSeqNum > phba->mbox_ext_buf_ctx.numBuf) | |
| goto sli_cfg_ext_error; | |
| if (mbox_req->extSeqNum != phba->mbox_ext_buf_ctx.seqNum + 1) | |
| goto sli_cfg_ext_error; | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2975 SLI_CONFIG mailbox external buffer: " | |
| "extSta:x%x, tag:%d, seq:%d\n", | |
| phba->mbox_ext_buf_ctx.state, mbox_req->extMboxTag, | |
| mbox_req->extSeqNum); | |
| rc = lpfc_bsg_handle_sli_cfg_ebuf(phba, job, dmabuf); | |
| return rc; | |
| sli_cfg_ext_error: | |
| /* all other cases, broken pipe */ | |
| lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC, | |
| "2976 SLI_CONFIG mailbox broken pipe: " | |
| "ctxSta:x%x, ctxNumBuf:%d " | |
| "ctxTag:%d, ctxSeq:%d, tag:%d, seq:%d\n", | |
| phba->mbox_ext_buf_ctx.state, | |
| phba->mbox_ext_buf_ctx.numBuf, | |
| phba->mbox_ext_buf_ctx.mbxTag, | |
| phba->mbox_ext_buf_ctx.seqNum, | |
| mbox_req->extMboxTag, mbox_req->extSeqNum); | |
| lpfc_bsg_mbox_ext_session_reset(phba); | |
| return -EPIPE; | |
| } | |
| /** | |
| * lpfc_bsg_issue_mbox - issues a mailbox command on behalf of an app | |
| * @phba: Pointer to HBA context object. | |
| * @mb: Pointer to a mailbox object. | |
| * @vport: Pointer to a vport object. | |
| * | |
| * Allocate a tracking object, mailbox command memory, get a mailbox | |
| * from the mailbox pool, copy the caller mailbox command. | |
| * | |
| * If offline and the sli is active we need to poll for the command (port is | |
| * being reset) and com-plete the job, otherwise issue the mailbox command and | |
| * let our completion handler finish the command. | |
| **/ | |
| static int | |
| lpfc_bsg_issue_mbox(struct lpfc_hba *phba, struct fc_bsg_job *job, | |
| struct lpfc_vport *vport) | |
| { | |
| LPFC_MBOXQ_t *pmboxq = NULL; /* internal mailbox queue */ | |
| MAILBOX_t *pmb; /* shortcut to the pmboxq mailbox */ | |
| /* a 4k buffer to hold the mb and extended data from/to the bsg */ | |
| uint8_t *pmbx = NULL; | |
| struct bsg_job_data *dd_data = NULL; /* bsg data tracking structure */ | |
| struct lpfc_dmabuf *dmabuf = NULL; | |
| struct dfc_mbox_req *mbox_req; | |
| struct READ_EVENT_LOG_VAR *rdEventLog; | |
| uint32_t transmit_length, receive_length, mode; | |
| struct lpfc_mbx_sli4_config *sli4_config; | |
| struct lpfc_mbx_nembed_cmd *nembed_sge; | |
| struct mbox_header *header; | |
| struct ulp_bde64 *bde; | |
| uint8_t *ext = NULL; | |
| int rc = 0; | |
| uint8_t *from; | |
| uint32_t size; | |
| /* in case no data is transferred */ | |
| job->reply->reply_payload_rcv_len = 0; | |
| /* sanity check to protect driver */ | |
| if (job->reply_payload.payload_len > BSG_MBOX_SIZE || | |
| job->request_payload.payload_len > BSG_MBOX_SIZE) { | |
| rc = -ERANGE; | |
| goto job_done; | |
| } | |
| /* | |
| * Don't allow mailbox commands to be sent when blocked or when in | |
| * the middle of discovery | |
| */ | |
| if (phba->sli.sli_flag & LPFC_BLOCK_MGMT_IO) { | |
| rc = -EAGAIN; | |
| goto job_done; | |
| } | |
| mbox_req = | |
| (struct dfc_mbox_req *)job->request->rqst_data.h_vendor.vendor_cmd; | |
| /* check if requested extended data lengths are valid */ | |
| if ((mbox_req->inExtWLen > BSG_MBOX_SIZE/sizeof(uint32_t)) || | |
| (mbox_req->outExtWLen > BSG_MBOX_SIZE/sizeof(uint32_t))) { | |
| rc = -ERANGE; | |
| goto job_done; | |
| } | |
| dmabuf = lpfc_bsg_dma_page_alloc(phba); | |
| if (!dmabuf || !dmabuf->virt) { | |
| rc = -ENOMEM; | |
| goto job_done; | |
| } | |
| /* Get the mailbox command or external buffer from BSG */ | |
| pmbx = (uint8_t *)dmabuf->virt; | |
| size = job->request_payload.payload_len; | |
| sg_copy_to_buffer(job->request_payload.sg_list, | |
| job->request_payload.sg_cnt, pmbx, size); | |
| /* Handle possible SLI_CONFIG with non-embedded payloads */ | |
| if (phba->sli_rev == LPFC_SLI_REV4) { | |
| rc = lpfc_bsg_handle_sli_cfg_ext(phba, job, dmabuf); | |
| if (rc == SLI_CONFIG_HANDLED) | |
| goto job_cont; | |
| if (rc) | |
| goto job_done; | |
| /* SLI_CONFIG_NOT_HANDLED for other mailbox commands */ | |
| } | |
| rc = lpfc_bsg_check_cmd_access(phba, (MAILBOX_t *)pmbx, vport); | |
| if (rc != 0) | |
| goto job_done; /* must be negative */ | |
| /* allocate our bsg tracking structure */ | |
| dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); | |
| if (!dd_data) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2727 Failed allocation of dd_data\n"); | |
| rc = -ENOMEM; | |
| goto job_done; | |
| } | |
| pmboxq = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL); | |
| if (!pmboxq) { | |
| rc = -ENOMEM; | |
| goto job_done; | |
| } | |
| memset(pmboxq, 0, sizeof(LPFC_MBOXQ_t)); | |
| pmb = &pmboxq->u.mb; | |
| memcpy(pmb, pmbx, sizeof(*pmb)); | |
| pmb->mbxOwner = OWN_HOST; | |
| pmboxq->vport = vport; | |
| /* If HBA encountered an error attention, allow only DUMP | |
| * or RESTART mailbox commands until the HBA is restarted. | |
| */ | |
| if (phba->pport->stopped && | |
| pmb->mbxCommand != MBX_DUMP_MEMORY && | |
| pmb->mbxCommand != MBX_RESTART && | |
| pmb->mbxCommand != MBX_WRITE_VPARMS && | |
| pmb->mbxCommand != MBX_WRITE_WWN) | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_MBOX, | |
| "2797 mbox: Issued mailbox cmd " | |
| "0x%x while in stopped state.\n", | |
| pmb->mbxCommand); | |
| /* extended mailbox commands will need an extended buffer */ | |
| if (mbox_req->inExtWLen || mbox_req->outExtWLen) { | |
| from = pmbx; | |
| ext = from + sizeof(MAILBOX_t); | |
| pmboxq->context2 = ext; | |
| pmboxq->in_ext_byte_len = | |
| mbox_req->inExtWLen * sizeof(uint32_t); | |
| pmboxq->out_ext_byte_len = | |
| mbox_req->outExtWLen * sizeof(uint32_t); | |
| pmboxq->mbox_offset_word = mbox_req->mbOffset; | |
| } | |
| /* biu diag will need a kernel buffer to transfer the data | |
| * allocate our own buffer and setup the mailbox command to | |
| * use ours | |
| */ | |
| if (pmb->mbxCommand == MBX_RUN_BIU_DIAG64) { | |
| transmit_length = pmb->un.varWords[1]; | |
| receive_length = pmb->un.varWords[4]; | |
| /* transmit length cannot be greater than receive length or | |
| * mailbox extension size | |
| */ | |
| if ((transmit_length > receive_length) || | |
| (transmit_length > BSG_MBOX_SIZE - sizeof(MAILBOX_t))) { | |
| rc = -ERANGE; | |
| goto job_done; | |
| } | |
| pmb->un.varBIUdiag.un.s2.xmit_bde64.addrHigh = | |
| putPaddrHigh(dmabuf->phys + sizeof(MAILBOX_t)); | |
| pmb->un.varBIUdiag.un.s2.xmit_bde64.addrLow = | |
| putPaddrLow(dmabuf->phys + sizeof(MAILBOX_t)); | |
| pmb->un.varBIUdiag.un.s2.rcv_bde64.addrHigh = | |
| putPaddrHigh(dmabuf->phys + sizeof(MAILBOX_t) | |
| + pmb->un.varBIUdiag.un.s2.xmit_bde64.tus.f.bdeSize); | |
| pmb->un.varBIUdiag.un.s2.rcv_bde64.addrLow = | |
| putPaddrLow(dmabuf->phys + sizeof(MAILBOX_t) | |
| + pmb->un.varBIUdiag.un.s2.xmit_bde64.tus.f.bdeSize); | |
| } else if (pmb->mbxCommand == MBX_READ_EVENT_LOG) { | |
| rdEventLog = &pmb->un.varRdEventLog; | |
| receive_length = rdEventLog->rcv_bde64.tus.f.bdeSize; | |
| mode = bf_get(lpfc_event_log, rdEventLog); | |
| /* receive length cannot be greater than mailbox | |
| * extension size | |
| */ | |
| if (receive_length > BSG_MBOX_SIZE - sizeof(MAILBOX_t)) { | |
| rc = -ERANGE; | |
| goto job_done; | |
| } | |
| /* mode zero uses a bde like biu diags command */ | |
| if (mode == 0) { | |
| pmb->un.varWords[3] = putPaddrLow(dmabuf->phys | |
| + sizeof(MAILBOX_t)); | |
| pmb->un.varWords[4] = putPaddrHigh(dmabuf->phys | |
| + sizeof(MAILBOX_t)); | |
| } | |
| } else if (phba->sli_rev == LPFC_SLI_REV4) { | |
| /* Let type 4 (well known data) through because the data is | |
| * returned in varwords[4-8] | |
| * otherwise check the recieve length and fetch the buffer addr | |
| */ | |
| if ((pmb->mbxCommand == MBX_DUMP_MEMORY) && | |
| (pmb->un.varDmp.type != DMP_WELL_KNOWN)) { | |
| /* rebuild the command for sli4 using our own buffers | |
| * like we do for biu diags | |
| */ | |
| receive_length = pmb->un.varWords[2]; | |
| /* receive length cannot be greater than mailbox | |
| * extension size | |
| */ | |
| if (receive_length == 0) { | |
| rc = -ERANGE; | |
| goto job_done; | |
| } | |
| pmb->un.varWords[3] = putPaddrLow(dmabuf->phys | |
| + sizeof(MAILBOX_t)); | |
| pmb->un.varWords[4] = putPaddrHigh(dmabuf->phys | |
| + sizeof(MAILBOX_t)); | |
| } else if ((pmb->mbxCommand == MBX_UPDATE_CFG) && | |
| pmb->un.varUpdateCfg.co) { | |
| bde = (struct ulp_bde64 *)&pmb->un.varWords[4]; | |
| /* bde size cannot be greater than mailbox ext size */ | |
| if (bde->tus.f.bdeSize > | |
| BSG_MBOX_SIZE - sizeof(MAILBOX_t)) { | |
| rc = -ERANGE; | |
| goto job_done; | |
| } | |
| bde->addrHigh = putPaddrHigh(dmabuf->phys | |
| + sizeof(MAILBOX_t)); | |
| bde->addrLow = putPaddrLow(dmabuf->phys | |
| + sizeof(MAILBOX_t)); | |
| } else if (pmb->mbxCommand == MBX_SLI4_CONFIG) { | |
| /* Handling non-embedded SLI_CONFIG mailbox command */ | |
| sli4_config = &pmboxq->u.mqe.un.sli4_config; | |
| if (!bf_get(lpfc_mbox_hdr_emb, | |
| &sli4_config->header.cfg_mhdr)) { | |
| /* rebuild the command for sli4 using our | |
| * own buffers like we do for biu diags | |
| */ | |
| header = (struct mbox_header *) | |
| &pmb->un.varWords[0]; | |
| nembed_sge = (struct lpfc_mbx_nembed_cmd *) | |
| &pmb->un.varWords[0]; | |
| receive_length = nembed_sge->sge[0].length; | |
| /* receive length cannot be greater than | |
| * mailbox extension size | |
| */ | |
| if ((receive_length == 0) || | |
| (receive_length > | |
| BSG_MBOX_SIZE - sizeof(MAILBOX_t))) { | |
| rc = -ERANGE; | |
| goto job_done; | |
| } | |
| nembed_sge->sge[0].pa_hi = | |
| putPaddrHigh(dmabuf->phys | |
| + sizeof(MAILBOX_t)); | |
| nembed_sge->sge[0].pa_lo = | |
| putPaddrLow(dmabuf->phys | |
| + sizeof(MAILBOX_t)); | |
| } | |
| } | |
| } | |
| dd_data->context_un.mbox.dmabuffers = dmabuf; | |
| /* setup wake call as IOCB callback */ | |
| pmboxq->mbox_cmpl = lpfc_bsg_issue_mbox_cmpl; | |
| /* setup context field to pass wait_queue pointer to wake function */ | |
| pmboxq->context1 = dd_data; | |
| dd_data->type = TYPE_MBOX; | |
| dd_data->set_job = job; | |
| dd_data->context_un.mbox.pmboxq = pmboxq; | |
| dd_data->context_un.mbox.mb = (MAILBOX_t *)pmbx; | |
| dd_data->context_un.mbox.ext = ext; | |
| dd_data->context_un.mbox.mbOffset = mbox_req->mbOffset; | |
| dd_data->context_un.mbox.inExtWLen = mbox_req->inExtWLen; | |
| dd_data->context_un.mbox.outExtWLen = mbox_req->outExtWLen; | |
| job->dd_data = dd_data; | |
| if ((vport->fc_flag & FC_OFFLINE_MODE) || | |
| (!(phba->sli.sli_flag & LPFC_SLI_ACTIVE))) { | |
| rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_POLL); | |
| if (rc != MBX_SUCCESS) { | |
| rc = (rc == MBX_TIMEOUT) ? -ETIME : -ENODEV; | |
| goto job_done; | |
| } | |
| /* job finished, copy the data */ | |
| memcpy(pmbx, pmb, sizeof(*pmb)); | |
| job->reply->reply_payload_rcv_len = | |
| sg_copy_from_buffer(job->reply_payload.sg_list, | |
| job->reply_payload.sg_cnt, | |
| pmbx, size); | |
| /* not waiting mbox already done */ | |
| rc = 0; | |
| goto job_done; | |
| } | |
| rc = lpfc_sli_issue_mbox(phba, pmboxq, MBX_NOWAIT); | |
| if ((rc == MBX_SUCCESS) || (rc == MBX_BUSY)) | |
| return 1; /* job started */ | |
| job_done: | |
| /* common exit for error or job completed inline */ | |
| if (pmboxq) | |
| mempool_free(pmboxq, phba->mbox_mem_pool); | |
| lpfc_bsg_dma_page_free(phba, dmabuf); | |
| kfree(dd_data); | |
| job_cont: | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_mbox_cmd - process an fc bsg LPFC_BSG_VENDOR_MBOX command | |
| * @job: MBOX fc_bsg_job for LPFC_BSG_VENDOR_MBOX. | |
| **/ | |
| static int | |
| lpfc_bsg_mbox_cmd(struct fc_bsg_job *job) | |
| { | |
| struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; | |
| struct lpfc_hba *phba = vport->phba; | |
| struct dfc_mbox_req *mbox_req; | |
| int rc = 0; | |
| /* mix-and-match backward compatibility */ | |
| job->reply->reply_payload_rcv_len = 0; | |
| if (job->request_len < | |
| sizeof(struct fc_bsg_request) + sizeof(struct dfc_mbox_req)) { | |
| lpfc_printf_log(phba, KERN_INFO, LOG_LIBDFC, | |
| "2737 Mix-and-match backward compatibility " | |
| "between MBOX_REQ old size:%d and " | |
| "new request size:%d\n", | |
| (int)(job->request_len - | |
| sizeof(struct fc_bsg_request)), | |
| (int)sizeof(struct dfc_mbox_req)); | |
| mbox_req = (struct dfc_mbox_req *) | |
| job->request->rqst_data.h_vendor.vendor_cmd; | |
| mbox_req->extMboxTag = 0; | |
| mbox_req->extSeqNum = 0; | |
| } | |
| rc = lpfc_bsg_issue_mbox(phba, job, vport); | |
| if (rc == 0) { | |
| /* job done */ | |
| job->reply->result = 0; | |
| job->dd_data = NULL; | |
| job->job_done(job); | |
| } else if (rc == 1) | |
| /* job submitted, will complete later*/ | |
| rc = 0; /* return zero, no error */ | |
| else { | |
| /* some error occurred */ | |
| job->reply->result = rc; | |
| job->dd_data = NULL; | |
| } | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_menlo_cmd_cmp - lpfc_menlo_cmd completion handler | |
| * @phba: Pointer to HBA context object. | |
| * @cmdiocbq: Pointer to command iocb. | |
| * @rspiocbq: Pointer to response iocb. | |
| * | |
| * This function is the completion handler for iocbs issued using | |
| * lpfc_menlo_cmd function. This function is called by the | |
| * ring event handler function without any lock held. This function | |
| * can be called from both worker thread context and interrupt | |
| * context. This function also can be called from another thread which | |
| * cleans up the SLI layer objects. | |
| * This function copies the contents of the response iocb to the | |
| * response iocb memory object provided by the caller of | |
| * lpfc_sli_issue_iocb_wait and then wakes up the thread which | |
| * sleeps for the iocb completion. | |
| **/ | |
| static void | |
| lpfc_bsg_menlo_cmd_cmp(struct lpfc_hba *phba, | |
| struct lpfc_iocbq *cmdiocbq, | |
| struct lpfc_iocbq *rspiocbq) | |
| { | |
| struct bsg_job_data *dd_data; | |
| struct fc_bsg_job *job; | |
| IOCB_t *rsp; | |
| struct lpfc_dmabuf *bmp, *cmp, *rmp; | |
| struct lpfc_bsg_menlo *menlo; | |
| unsigned long flags; | |
| struct menlo_response *menlo_resp; | |
| unsigned int rsp_size; | |
| int rc = 0; | |
| dd_data = cmdiocbq->context1; | |
| cmp = cmdiocbq->context2; | |
| bmp = cmdiocbq->context3; | |
| menlo = &dd_data->context_un.menlo; | |
| rmp = menlo->rmp; | |
| rsp = &rspiocbq->iocb; | |
| /* Determine if job has been aborted */ | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| job = dd_data->set_job; | |
| if (job) { | |
| /* Prevent timeout handling from trying to abort job */ | |
| job->dd_data = NULL; | |
| } | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| /* Copy the job data or set the failing status for the job */ | |
| if (job) { | |
| /* always return the xri, this would be used in the case | |
| * of a menlo download to allow the data to be sent as a | |
| * continuation of the exchange. | |
| */ | |
| menlo_resp = (struct menlo_response *) | |
| job->reply->reply_data.vendor_reply.vendor_rsp; | |
| menlo_resp->xri = rsp->ulpContext; | |
| if (rsp->ulpStatus) { | |
| if (rsp->ulpStatus == IOSTAT_LOCAL_REJECT) { | |
| switch (rsp->un.ulpWord[4] & IOERR_PARAM_MASK) { | |
| case IOERR_SEQUENCE_TIMEOUT: | |
| rc = -ETIMEDOUT; | |
| break; | |
| case IOERR_INVALID_RPI: | |
| rc = -EFAULT; | |
| break; | |
| default: | |
| rc = -EACCES; | |
| break; | |
| } | |
| } else { | |
| rc = -EACCES; | |
| } | |
| } else { | |
| rsp_size = rsp->un.genreq64.bdl.bdeSize; | |
| job->reply->reply_payload_rcv_len = | |
| lpfc_bsg_copy_data(rmp, &job->reply_payload, | |
| rsp_size, 0); | |
| } | |
| } | |
| lpfc_sli_release_iocbq(phba, cmdiocbq); | |
| lpfc_free_bsg_buffers(phba, cmp); | |
| lpfc_free_bsg_buffers(phba, rmp); | |
| lpfc_mbuf_free(phba, bmp->virt, bmp->phys); | |
| kfree(bmp); | |
| kfree(dd_data); | |
| /* Complete the job if active */ | |
| if (job) { | |
| job->reply->result = rc; | |
| job->job_done(job); | |
| } | |
| return; | |
| } | |
| /** | |
| * lpfc_menlo_cmd - send an ioctl for menlo hardware | |
| * @job: fc_bsg_job to handle | |
| * | |
| * This function issues a gen request 64 CR ioctl for all menlo cmd requests, | |
| * all the command completions will return the xri for the command. | |
| * For menlo data requests a gen request 64 CX is used to continue the exchange | |
| * supplied in the menlo request header xri field. | |
| **/ | |
| static int | |
| lpfc_menlo_cmd(struct fc_bsg_job *job) | |
| { | |
| struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; | |
| struct lpfc_hba *phba = vport->phba; | |
| struct lpfc_iocbq *cmdiocbq; | |
| IOCB_t *cmd; | |
| int rc = 0; | |
| struct menlo_command *menlo_cmd; | |
| struct menlo_response *menlo_resp; | |
| struct lpfc_dmabuf *bmp = NULL, *cmp = NULL, *rmp = NULL; | |
| int request_nseg; | |
| int reply_nseg; | |
| struct bsg_job_data *dd_data; | |
| struct ulp_bde64 *bpl = NULL; | |
| /* in case no data is returned return just the return code */ | |
| job->reply->reply_payload_rcv_len = 0; | |
| if (job->request_len < | |
| sizeof(struct fc_bsg_request) + | |
| sizeof(struct menlo_command)) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2784 Received MENLO_CMD request below " | |
| "minimum size\n"); | |
| rc = -ERANGE; | |
| goto no_dd_data; | |
| } | |
| if (job->reply_len < | |
| sizeof(struct fc_bsg_request) + sizeof(struct menlo_response)) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2785 Received MENLO_CMD reply below " | |
| "minimum size\n"); | |
| rc = -ERANGE; | |
| goto no_dd_data; | |
| } | |
| if (!(phba->menlo_flag & HBA_MENLO_SUPPORT)) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2786 Adapter does not support menlo " | |
| "commands\n"); | |
| rc = -EPERM; | |
| goto no_dd_data; | |
| } | |
| menlo_cmd = (struct menlo_command *) | |
| job->request->rqst_data.h_vendor.vendor_cmd; | |
| menlo_resp = (struct menlo_response *) | |
| job->reply->reply_data.vendor_reply.vendor_rsp; | |
| /* allocate our bsg tracking structure */ | |
| dd_data = kmalloc(sizeof(struct bsg_job_data), GFP_KERNEL); | |
| if (!dd_data) { | |
| lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC, | |
| "2787 Failed allocation of dd_data\n"); | |
| rc = -ENOMEM; | |
| goto no_dd_data; | |
| } | |
| bmp = kmalloc(sizeof(struct lpfc_dmabuf), GFP_KERNEL); | |
| if (!bmp) { | |
| rc = -ENOMEM; | |
| goto free_dd; | |
| } | |
| bmp->virt = lpfc_mbuf_alloc(phba, 0, &bmp->phys); | |
| if (!bmp->virt) { | |
| rc = -ENOMEM; | |
| goto free_bmp; | |
| } | |
| INIT_LIST_HEAD(&bmp->list); | |
| bpl = (struct ulp_bde64 *)bmp->virt; | |
| request_nseg = LPFC_BPL_SIZE/sizeof(struct ulp_bde64); | |
| cmp = lpfc_alloc_bsg_buffers(phba, job->request_payload.payload_len, | |
| 1, bpl, &request_nseg); | |
| if (!cmp) { | |
| rc = -ENOMEM; | |
| goto free_bmp; | |
| } | |
| lpfc_bsg_copy_data(cmp, &job->request_payload, | |
| job->request_payload.payload_len, 1); | |
| bpl += request_nseg; | |
| reply_nseg = LPFC_BPL_SIZE/sizeof(struct ulp_bde64) - request_nseg; | |
| rmp = lpfc_alloc_bsg_buffers(phba, job->reply_payload.payload_len, 0, | |
| bpl, &reply_nseg); | |
| if (!rmp) { | |
| rc = -ENOMEM; | |
| goto free_cmp; | |
| } | |
| cmdiocbq = lpfc_sli_get_iocbq(phba); | |
| if (!cmdiocbq) { | |
| rc = -ENOMEM; | |
| goto free_rmp; | |
| } | |
| cmd = &cmdiocbq->iocb; | |
| cmd->un.genreq64.bdl.ulpIoTag32 = 0; | |
| cmd->un.genreq64.bdl.addrHigh = putPaddrHigh(bmp->phys); | |
| cmd->un.genreq64.bdl.addrLow = putPaddrLow(bmp->phys); | |
| cmd->un.genreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64; | |
| cmd->un.genreq64.bdl.bdeSize = | |
| (request_nseg + reply_nseg) * sizeof(struct ulp_bde64); | |
| cmd->un.genreq64.w5.hcsw.Fctl = (SI | LA); | |
| cmd->un.genreq64.w5.hcsw.Dfctl = 0; | |
| cmd->un.genreq64.w5.hcsw.Rctl = FC_RCTL_DD_UNSOL_CMD; | |
| cmd->un.genreq64.w5.hcsw.Type = MENLO_TRANSPORT_TYPE; /* 0xfe */ | |
| cmd->ulpBdeCount = 1; | |
| cmd->ulpClass = CLASS3; | |
| cmd->ulpOwner = OWN_CHIP; | |
| cmd->ulpLe = 1; /* Limited Edition */ | |
| cmdiocbq->iocb_flag |= LPFC_IO_LIBDFC; | |
| cmdiocbq->vport = phba->pport; | |
| /* We want the firmware to timeout before we do */ | |
| cmd->ulpTimeout = MENLO_TIMEOUT - 5; | |
| cmdiocbq->iocb_cmpl = lpfc_bsg_menlo_cmd_cmp; | |
| cmdiocbq->context1 = dd_data; | |
| cmdiocbq->context2 = cmp; | |
| cmdiocbq->context3 = bmp; | |
| if (menlo_cmd->cmd == LPFC_BSG_VENDOR_MENLO_CMD) { | |
| cmd->ulpCommand = CMD_GEN_REQUEST64_CR; | |
| cmd->ulpPU = MENLO_PU; /* 3 */ | |
| cmd->un.ulpWord[4] = MENLO_DID; /* 0x0000FC0E */ | |
| cmd->ulpContext = MENLO_CONTEXT; /* 0 */ | |
| } else { | |
| cmd->ulpCommand = CMD_GEN_REQUEST64_CX; | |
| cmd->ulpPU = 1; | |
| cmd->un.ulpWord[4] = 0; | |
| cmd->ulpContext = menlo_cmd->xri; | |
| } | |
| dd_data->type = TYPE_MENLO; | |
| dd_data->set_job = job; | |
| dd_data->context_un.menlo.cmdiocbq = cmdiocbq; | |
| dd_data->context_un.menlo.rmp = rmp; | |
| job->dd_data = dd_data; | |
| rc = lpfc_sli_issue_iocb(phba, LPFC_ELS_RING, cmdiocbq, | |
| MENLO_TIMEOUT - 5); | |
| if (rc == IOCB_SUCCESS) | |
| return 0; /* done for now */ | |
| lpfc_sli_release_iocbq(phba, cmdiocbq); | |
| free_rmp: | |
| lpfc_free_bsg_buffers(phba, rmp); | |
| free_cmp: | |
| lpfc_free_bsg_buffers(phba, cmp); | |
| free_bmp: | |
| if (bmp->virt) | |
| lpfc_mbuf_free(phba, bmp->virt, bmp->phys); | |
| kfree(bmp); | |
| free_dd: | |
| kfree(dd_data); | |
| no_dd_data: | |
| /* make error code available to userspace */ | |
| job->reply->result = rc; | |
| job->dd_data = NULL; | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_hst_vendor - process a vendor-specific fc_bsg_job | |
| * @job: fc_bsg_job to handle | |
| **/ | |
| static int | |
| lpfc_bsg_hst_vendor(struct fc_bsg_job *job) | |
| { | |
| int command = job->request->rqst_data.h_vendor.vendor_cmd[0]; | |
| int rc; | |
| switch (command) { | |
| case LPFC_BSG_VENDOR_SET_CT_EVENT: | |
| rc = lpfc_bsg_hba_set_event(job); | |
| break; | |
| case LPFC_BSG_VENDOR_GET_CT_EVENT: | |
| rc = lpfc_bsg_hba_get_event(job); | |
| break; | |
| case LPFC_BSG_VENDOR_SEND_MGMT_RESP: | |
| rc = lpfc_bsg_send_mgmt_rsp(job); | |
| break; | |
| case LPFC_BSG_VENDOR_DIAG_MODE: | |
| rc = lpfc_bsg_diag_loopback_mode(job); | |
| break; | |
| case LPFC_BSG_VENDOR_DIAG_MODE_END: | |
| rc = lpfc_sli4_bsg_diag_mode_end(job); | |
| break; | |
| case LPFC_BSG_VENDOR_DIAG_RUN_LOOPBACK: | |
| rc = lpfc_bsg_diag_loopback_run(job); | |
| break; | |
| case LPFC_BSG_VENDOR_LINK_DIAG_TEST: | |
| rc = lpfc_sli4_bsg_link_diag_test(job); | |
| break; | |
| case LPFC_BSG_VENDOR_GET_MGMT_REV: | |
| rc = lpfc_bsg_get_dfc_rev(job); | |
| break; | |
| case LPFC_BSG_VENDOR_MBOX: | |
| rc = lpfc_bsg_mbox_cmd(job); | |
| break; | |
| case LPFC_BSG_VENDOR_MENLO_CMD: | |
| case LPFC_BSG_VENDOR_MENLO_DATA: | |
| rc = lpfc_menlo_cmd(job); | |
| break; | |
| default: | |
| rc = -EINVAL; | |
| job->reply->reply_payload_rcv_len = 0; | |
| /* make error code available to userspace */ | |
| job->reply->result = rc; | |
| break; | |
| } | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_request - handle a bsg request from the FC transport | |
| * @job: fc_bsg_job to handle | |
| **/ | |
| int | |
| lpfc_bsg_request(struct fc_bsg_job *job) | |
| { | |
| uint32_t msgcode; | |
| int rc; | |
| msgcode = job->request->msgcode; | |
| switch (msgcode) { | |
| case FC_BSG_HST_VENDOR: | |
| rc = lpfc_bsg_hst_vendor(job); | |
| break; | |
| case FC_BSG_RPT_ELS: | |
| rc = lpfc_bsg_rport_els(job); | |
| break; | |
| case FC_BSG_RPT_CT: | |
| rc = lpfc_bsg_send_mgmt_cmd(job); | |
| break; | |
| default: | |
| rc = -EINVAL; | |
| job->reply->reply_payload_rcv_len = 0; | |
| /* make error code available to userspace */ | |
| job->reply->result = rc; | |
| break; | |
| } | |
| return rc; | |
| } | |
| /** | |
| * lpfc_bsg_timeout - handle timeout of a bsg request from the FC transport | |
| * @job: fc_bsg_job that has timed out | |
| * | |
| * This function just aborts the job's IOCB. The aborted IOCB will return to | |
| * the waiting function which will handle passing the error back to userspace | |
| **/ | |
| int | |
| lpfc_bsg_timeout(struct fc_bsg_job *job) | |
| { | |
| struct lpfc_vport *vport = (struct lpfc_vport *)job->shost->hostdata; | |
| struct lpfc_hba *phba = vport->phba; | |
| struct lpfc_iocbq *cmdiocb; | |
| struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING]; | |
| struct bsg_job_data *dd_data; | |
| unsigned long flags; | |
| int rc = 0; | |
| LIST_HEAD(completions); | |
| struct lpfc_iocbq *check_iocb, *next_iocb; | |
| /* if job's driver data is NULL, the command completed or is in the | |
| * the process of completing. In this case, return status to request | |
| * so the timeout is retried. This avoids double completion issues | |
| * and the request will be pulled off the timer queue when the | |
| * command's completion handler executes. Otherwise, prevent the | |
| * command's completion handler from executing the job done callback | |
| * and continue processing to abort the outstanding the command. | |
| */ | |
| spin_lock_irqsave(&phba->ct_ev_lock, flags); | |
| dd_data = (struct bsg_job_data *)job->dd_data; | |
| if (dd_data) { | |
| dd_data->set_job = NULL; | |
| job->dd_data = NULL; | |
| } else { | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| return -EAGAIN; | |
| } | |
| switch (dd_data->type) { | |
| case TYPE_IOCB: | |
| /* Check to see if IOCB was issued to the port or not. If not, | |
| * remove it from the txq queue and call cancel iocbs. | |
| * Otherwise, call abort iotag | |
| */ | |
| cmdiocb = dd_data->context_un.iocb.cmdiocbq; | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| spin_lock_irqsave(&phba->hbalock, flags); | |
| /* make sure the I/O abort window is still open */ | |
| if (!(cmdiocb->iocb_flag & LPFC_IO_CMD_OUTSTANDING)) { | |
| spin_unlock_irqrestore(&phba->hbalock, flags); | |
| return -EAGAIN; | |
| } | |
| list_for_each_entry_safe(check_iocb, next_iocb, &pring->txq, | |
| list) { | |
| if (check_iocb == cmdiocb) { | |
| list_move_tail(&check_iocb->list, &completions); | |
| break; | |
| } | |
| } | |
| if (list_empty(&completions)) | |
| lpfc_sli_issue_abort_iotag(phba, pring, cmdiocb); | |
| spin_unlock_irqrestore(&phba->hbalock, flags); | |
| if (!list_empty(&completions)) { | |
| lpfc_sli_cancel_iocbs(phba, &completions, | |
| IOSTAT_LOCAL_REJECT, | |
| IOERR_SLI_ABORTED); | |
| } | |
| break; | |
| case TYPE_EVT: | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| break; | |
| case TYPE_MBOX: | |
| /* Update the ext buf ctx state if needed */ | |
| if (phba->mbox_ext_buf_ctx.state == LPFC_BSG_MBOX_PORT) | |
| phba->mbox_ext_buf_ctx.state = LPFC_BSG_MBOX_ABTS; | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| break; | |
| case TYPE_MENLO: | |
| /* Check to see if IOCB was issued to the port or not. If not, | |
| * remove it from the txq queue and call cancel iocbs. | |
| * Otherwise, call abort iotag. | |
| */ | |
| cmdiocb = dd_data->context_un.menlo.cmdiocbq; | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| spin_lock_irqsave(&phba->hbalock, flags); | |
| list_for_each_entry_safe(check_iocb, next_iocb, &pring->txq, | |
| list) { | |
| if (check_iocb == cmdiocb) { | |
| list_move_tail(&check_iocb->list, &completions); | |
| break; | |
| } | |
| } | |
| if (list_empty(&completions)) | |
| lpfc_sli_issue_abort_iotag(phba, pring, cmdiocb); | |
| spin_unlock_irqrestore(&phba->hbalock, flags); | |
| if (!list_empty(&completions)) { | |
| lpfc_sli_cancel_iocbs(phba, &completions, | |
| IOSTAT_LOCAL_REJECT, | |
| IOERR_SLI_ABORTED); | |
| } | |
| break; | |
| default: | |
| spin_unlock_irqrestore(&phba->ct_ev_lock, flags); | |
| break; | |
| } | |
| /* scsi transport fc fc_bsg_job_timeout expects a zero return code, | |
| * otherwise an error message will be displayed on the console | |
| * so always return success (zero) | |
| */ | |
| return rc; | |
| } |