| /* drivers/char/watchdog/scx200_wdt.c | |
| National Semiconductor SCx200 Watchdog support | |
| Copyright (c) 2001,2002 Christer Weinigel <[email protected]> | |
| Some code taken from: | |
| National Semiconductor PC87307/PC97307 (ala SC1200) WDT driver | |
| (c) Copyright 2002 Zwane Mwaikambo <[email protected]> | |
| This program is free software; you can redistribute it and/or | |
| modify it under the terms of the GNU General Public License as | |
| published by the Free Software Foundation; either version 2 of the | |
| License, or (at your option) any later version. | |
| The author(s) of this software shall not be held liable for damages | |
| of any nature resulting due to the use of this software. This | |
| software is provided AS-IS with no warranties. */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/init.h> | |
| #include <linux/miscdevice.h> | |
| #include <linux/watchdog.h> | |
| #include <linux/notifier.h> | |
| #include <linux/reboot.h> | |
| #include <linux/fs.h> | |
| #include <linux/ioport.h> | |
| #include <linux/scx200.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/io.h> | |
| #define DEBUG | |
| MODULE_AUTHOR("Christer Weinigel <[email protected]>"); | |
| MODULE_DESCRIPTION("NatSemi SCx200 Watchdog Driver"); | |
| MODULE_LICENSE("GPL"); | |
| static int margin = 60; /* in seconds */ | |
| module_param(margin, int, 0); | |
| MODULE_PARM_DESC(margin, "Watchdog margin in seconds"); | |
| static bool nowayout = WATCHDOG_NOWAYOUT; | |
| module_param(nowayout, bool, 0); | |
| MODULE_PARM_DESC(nowayout, "Disable watchdog shutdown on close"); | |
| static u16 wdto_restart; | |
| static char expect_close; | |
| static unsigned long open_lock; | |
| static DEFINE_SPINLOCK(scx_lock); | |
| /* Bits of the WDCNFG register */ | |
| #define W_ENABLE 0x00fa /* Enable watchdog */ | |
| #define W_DISABLE 0x0000 /* Disable watchdog */ | |
| /* The scaling factor for the timer, this depends on the value of W_ENABLE */ | |
| #define W_SCALE (32768/1024) | |
| static void scx200_wdt_ping(void) | |
| { | |
| spin_lock(&scx_lock); | |
| outw(wdto_restart, scx200_cb_base + SCx200_WDT_WDTO); | |
| spin_unlock(&scx_lock); | |
| } | |
| static void scx200_wdt_update_margin(void) | |
| { | |
| pr_info("timer margin %d seconds\n", margin); | |
| wdto_restart = margin * W_SCALE; | |
| } | |
| static void scx200_wdt_enable(void) | |
| { | |
| pr_debug("enabling watchdog timer, wdto_restart = %d\n", wdto_restart); | |
| spin_lock(&scx_lock); | |
| outw(0, scx200_cb_base + SCx200_WDT_WDTO); | |
| outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS); | |
| outw(W_ENABLE, scx200_cb_base + SCx200_WDT_WDCNFG); | |
| spin_unlock(&scx_lock); | |
| scx200_wdt_ping(); | |
| } | |
| static void scx200_wdt_disable(void) | |
| { | |
| pr_debug("disabling watchdog timer\n"); | |
| spin_lock(&scx_lock); | |
| outw(0, scx200_cb_base + SCx200_WDT_WDTO); | |
| outb(SCx200_WDT_WDSTS_WDOVF, scx200_cb_base + SCx200_WDT_WDSTS); | |
| outw(W_DISABLE, scx200_cb_base + SCx200_WDT_WDCNFG); | |
| spin_unlock(&scx_lock); | |
| } | |
| static int scx200_wdt_open(struct inode *inode, struct file *file) | |
| { | |
| /* only allow one at a time */ | |
| if (test_and_set_bit(0, &open_lock)) | |
| return -EBUSY; | |
| scx200_wdt_enable(); | |
| return nonseekable_open(inode, file); | |
| } | |
| static int scx200_wdt_release(struct inode *inode, struct file *file) | |
| { | |
| if (expect_close != 42) | |
| pr_warn("watchdog device closed unexpectedly, will not disable the watchdog timer\n"); | |
| else if (!nowayout) | |
| scx200_wdt_disable(); | |
| expect_close = 0; | |
| clear_bit(0, &open_lock); | |
| return 0; | |
| } | |
| static int scx200_wdt_notify_sys(struct notifier_block *this, | |
| unsigned long code, void *unused) | |
| { | |
| if (code == SYS_HALT || code == SYS_POWER_OFF) | |
| if (!nowayout) | |
| scx200_wdt_disable(); | |
| return NOTIFY_DONE; | |
| } | |
| static struct notifier_block scx200_wdt_notifier = { | |
| .notifier_call = scx200_wdt_notify_sys, | |
| }; | |
| static ssize_t scx200_wdt_write(struct file *file, const char __user *data, | |
| size_t len, loff_t *ppos) | |
| { | |
| /* check for a magic close character */ | |
| if (len) { | |
| size_t i; | |
| scx200_wdt_ping(); | |
| expect_close = 0; | |
| for (i = 0; i < len; ++i) { | |
| char c; | |
| if (get_user(c, data + i)) | |
| return -EFAULT; | |
| if (c == 'V') | |
| expect_close = 42; | |
| } | |
| return len; | |
| } | |
| return 0; | |
| } | |
| static long scx200_wdt_ioctl(struct file *file, unsigned int cmd, | |
| unsigned long arg) | |
| { | |
| void __user *argp = (void __user *)arg; | |
| int __user *p = argp; | |
| static const struct watchdog_info ident = { | |
| .identity = "NatSemi SCx200 Watchdog", | |
| .firmware_version = 1, | |
| .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | | |
| WDIOF_MAGICCLOSE, | |
| }; | |
| int new_margin; | |
| switch (cmd) { | |
| case WDIOC_GETSUPPORT: | |
| if (copy_to_user(argp, &ident, sizeof(ident))) | |
| return -EFAULT; | |
| return 0; | |
| case WDIOC_GETSTATUS: | |
| case WDIOC_GETBOOTSTATUS: | |
| if (put_user(0, p)) | |
| return -EFAULT; | |
| return 0; | |
| case WDIOC_KEEPALIVE: | |
| scx200_wdt_ping(); | |
| return 0; | |
| case WDIOC_SETTIMEOUT: | |
| if (get_user(new_margin, p)) | |
| return -EFAULT; | |
| if (new_margin < 1) | |
| return -EINVAL; | |
| margin = new_margin; | |
| scx200_wdt_update_margin(); | |
| scx200_wdt_ping(); | |
| case WDIOC_GETTIMEOUT: | |
| if (put_user(margin, p)) | |
| return -EFAULT; | |
| return 0; | |
| default: | |
| return -ENOTTY; | |
| } | |
| } | |
| static const struct file_operations scx200_wdt_fops = { | |
| .owner = THIS_MODULE, | |
| .llseek = no_llseek, | |
| .write = scx200_wdt_write, | |
| .unlocked_ioctl = scx200_wdt_ioctl, | |
| .open = scx200_wdt_open, | |
| .release = scx200_wdt_release, | |
| }; | |
| static struct miscdevice scx200_wdt_miscdev = { | |
| .minor = WATCHDOG_MINOR, | |
| .name = "watchdog", | |
| .fops = &scx200_wdt_fops, | |
| }; | |
| static int __init scx200_wdt_init(void) | |
| { | |
| int r; | |
| pr_debug("NatSemi SCx200 Watchdog Driver\n"); | |
| /* check that we have found the configuration block */ | |
| if (!scx200_cb_present()) | |
| return -ENODEV; | |
| if (!request_region(scx200_cb_base + SCx200_WDT_OFFSET, | |
| SCx200_WDT_SIZE, | |
| "NatSemi SCx200 Watchdog")) { | |
| pr_warn("watchdog I/O region busy\n"); | |
| return -EBUSY; | |
| } | |
| scx200_wdt_update_margin(); | |
| scx200_wdt_disable(); | |
| r = register_reboot_notifier(&scx200_wdt_notifier); | |
| if (r) { | |
| pr_err("unable to register reboot notifier\n"); | |
| release_region(scx200_cb_base + SCx200_WDT_OFFSET, | |
| SCx200_WDT_SIZE); | |
| return r; | |
| } | |
| r = misc_register(&scx200_wdt_miscdev); | |
| if (r) { | |
| unregister_reboot_notifier(&scx200_wdt_notifier); | |
| release_region(scx200_cb_base + SCx200_WDT_OFFSET, | |
| SCx200_WDT_SIZE); | |
| return r; | |
| } | |
| return 0; | |
| } | |
| static void __exit scx200_wdt_cleanup(void) | |
| { | |
| misc_deregister(&scx200_wdt_miscdev); | |
| unregister_reboot_notifier(&scx200_wdt_notifier); | |
| release_region(scx200_cb_base + SCx200_WDT_OFFSET, | |
| SCx200_WDT_SIZE); | |
| } | |
| module_init(scx200_wdt_init); | |
| module_exit(scx200_wdt_cleanup); | |
| /* | |
| Local variables: | |
| compile-command: "make -k -C ../.. SUBDIRS=drivers/char modules" | |
| c-basic-offset: 8 | |
| End: | |
| */ |