| /* | 
 |  * linux/drivers/mfd/aat2870-core.c | 
 |  * | 
 |  * Copyright (c) 2011, NVIDIA Corporation. | 
 |  * Author: Jin Park <[email protected]> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or | 
 |  * modify it under the terms of the GNU General Public License | 
 |  * version 2 as published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, but | 
 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 |  * General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA | 
 |  * 02110-1301 USA | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/init.h> | 
 | #include <linux/debugfs.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/uaccess.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/gpio.h> | 
 | #include <linux/mfd/core.h> | 
 | #include <linux/mfd/aat2870.h> | 
 | #include <linux/regulator/machine.h> | 
 |  | 
 | static struct aat2870_register aat2870_regs[AAT2870_REG_NUM] = { | 
 | 	/* readable, writeable, value */ | 
 | 	{ 0, 1, 0x00 },	/* 0x00 AAT2870_BL_CH_EN */ | 
 | 	{ 0, 1, 0x16 },	/* 0x01 AAT2870_BLM */ | 
 | 	{ 0, 1, 0x16 },	/* 0x02 AAT2870_BLS */ | 
 | 	{ 0, 1, 0x56 },	/* 0x03 AAT2870_BL1 */ | 
 | 	{ 0, 1, 0x56 },	/* 0x04 AAT2870_BL2 */ | 
 | 	{ 0, 1, 0x56 },	/* 0x05 AAT2870_BL3 */ | 
 | 	{ 0, 1, 0x56 },	/* 0x06 AAT2870_BL4 */ | 
 | 	{ 0, 1, 0x56 },	/* 0x07 AAT2870_BL5 */ | 
 | 	{ 0, 1, 0x56 },	/* 0x08 AAT2870_BL6 */ | 
 | 	{ 0, 1, 0x56 },	/* 0x09 AAT2870_BL7 */ | 
 | 	{ 0, 1, 0x56 },	/* 0x0A AAT2870_BL8 */ | 
 | 	{ 0, 1, 0x00 },	/* 0x0B AAT2870_FLR */ | 
 | 	{ 0, 1, 0x03 },	/* 0x0C AAT2870_FM */ | 
 | 	{ 0, 1, 0x03 },	/* 0x0D AAT2870_FS */ | 
 | 	{ 0, 1, 0x10 },	/* 0x0E AAT2870_ALS_CFG0 */ | 
 | 	{ 0, 1, 0x06 },	/* 0x0F AAT2870_ALS_CFG1 */ | 
 | 	{ 0, 1, 0x00 },	/* 0x10 AAT2870_ALS_CFG2 */ | 
 | 	{ 1, 0, 0x00 },	/* 0x11 AAT2870_AMB */ | 
 | 	{ 0, 1, 0x00 },	/* 0x12 AAT2870_ALS0 */ | 
 | 	{ 0, 1, 0x00 },	/* 0x13 AAT2870_ALS1 */ | 
 | 	{ 0, 1, 0x00 },	/* 0x14 AAT2870_ALS2 */ | 
 | 	{ 0, 1, 0x00 },	/* 0x15 AAT2870_ALS3 */ | 
 | 	{ 0, 1, 0x00 },	/* 0x16 AAT2870_ALS4 */ | 
 | 	{ 0, 1, 0x00 },	/* 0x17 AAT2870_ALS5 */ | 
 | 	{ 0, 1, 0x00 },	/* 0x18 AAT2870_ALS6 */ | 
 | 	{ 0, 1, 0x00 },	/* 0x19 AAT2870_ALS7 */ | 
 | 	{ 0, 1, 0x00 },	/* 0x1A AAT2870_ALS8 */ | 
 | 	{ 0, 1, 0x00 },	/* 0x1B AAT2870_ALS9 */ | 
 | 	{ 0, 1, 0x00 },	/* 0x1C AAT2870_ALSA */ | 
 | 	{ 0, 1, 0x00 },	/* 0x1D AAT2870_ALSB */ | 
 | 	{ 0, 1, 0x00 },	/* 0x1E AAT2870_ALSC */ | 
 | 	{ 0, 1, 0x00 },	/* 0x1F AAT2870_ALSD */ | 
 | 	{ 0, 1, 0x00 },	/* 0x20 AAT2870_ALSE */ | 
 | 	{ 0, 1, 0x00 },	/* 0x21 AAT2870_ALSF */ | 
 | 	{ 0, 1, 0x00 },	/* 0x22 AAT2870_SUB_SET */ | 
 | 	{ 0, 1, 0x00 },	/* 0x23 AAT2870_SUB_CTRL */ | 
 | 	{ 0, 1, 0x00 },	/* 0x24 AAT2870_LDO_AB */ | 
 | 	{ 0, 1, 0x00 },	/* 0x25 AAT2870_LDO_CD */ | 
 | 	{ 0, 1, 0x00 },	/* 0x26 AAT2870_LDO_EN */ | 
 | }; | 
 |  | 
 | static struct mfd_cell aat2870_devs[] = { | 
 | 	{ | 
 | 		.name = "aat2870-backlight", | 
 | 		.id = AAT2870_ID_BL, | 
 | 		.pdata_size = sizeof(struct aat2870_bl_platform_data), | 
 | 	}, | 
 | 	{ | 
 | 		.name = "aat2870-regulator", | 
 | 		.id = AAT2870_ID_LDOA, | 
 | 		.pdata_size = sizeof(struct regulator_init_data), | 
 | 	}, | 
 | 	{ | 
 | 		.name = "aat2870-regulator", | 
 | 		.id = AAT2870_ID_LDOB, | 
 | 		.pdata_size = sizeof(struct regulator_init_data), | 
 | 	}, | 
 | 	{ | 
 | 		.name = "aat2870-regulator", | 
 | 		.id = AAT2870_ID_LDOC, | 
 | 		.pdata_size = sizeof(struct regulator_init_data), | 
 | 	}, | 
 | 	{ | 
 | 		.name = "aat2870-regulator", | 
 | 		.id = AAT2870_ID_LDOD, | 
 | 		.pdata_size = sizeof(struct regulator_init_data), | 
 | 	}, | 
 | }; | 
 |  | 
 | static int __aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	if (addr >= AAT2870_REG_NUM) { | 
 | 		dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (!aat2870->reg_cache[addr].readable) { | 
 | 		*val = aat2870->reg_cache[addr].value; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	ret = i2c_master_send(aat2870->client, &addr, 1); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	if (ret != 1) | 
 | 		return -EIO; | 
 |  | 
 | 	ret = i2c_master_recv(aat2870->client, val, 1); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	if (ret != 1) | 
 | 		return -EIO; | 
 |  | 
 | out: | 
 | 	dev_dbg(aat2870->dev, "read: addr=0x%02x, val=0x%02x\n", addr, *val); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val) | 
 | { | 
 | 	u8 msg[2]; | 
 | 	int ret; | 
 |  | 
 | 	if (addr >= AAT2870_REG_NUM) { | 
 | 		dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (!aat2870->reg_cache[addr].writeable) { | 
 | 		dev_err(aat2870->dev, "Address 0x%02x is not writeable\n", | 
 | 			addr); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	msg[0] = addr; | 
 | 	msg[1] = val; | 
 | 	ret = i2c_master_send(aat2870->client, msg, 2); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	if (ret != 2) | 
 | 		return -EIO; | 
 |  | 
 | 	aat2870->reg_cache[addr].value = val; | 
 |  | 
 | 	dev_dbg(aat2870->dev, "write: addr=0x%02x, val=0x%02x\n", addr, val); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&aat2870->io_lock); | 
 | 	ret = __aat2870_read(aat2870, addr, val); | 
 | 	mutex_unlock(&aat2870->io_lock); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&aat2870->io_lock); | 
 | 	ret = __aat2870_write(aat2870, addr, val); | 
 | 	mutex_unlock(&aat2870->io_lock); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int aat2870_update(struct aat2870_data *aat2870, u8 addr, u8 mask, | 
 | 			  u8 val) | 
 | { | 
 | 	int change; | 
 | 	u8 old_val, new_val; | 
 | 	int ret; | 
 |  | 
 | 	mutex_lock(&aat2870->io_lock); | 
 |  | 
 | 	ret = __aat2870_read(aat2870, addr, &old_val); | 
 | 	if (ret) | 
 | 		goto out_unlock; | 
 |  | 
 | 	new_val = (old_val & ~mask) | (val & mask); | 
 | 	change = old_val != new_val; | 
 | 	if (change) | 
 | 		ret = __aat2870_write(aat2870, addr, new_val); | 
 |  | 
 | out_unlock: | 
 | 	mutex_unlock(&aat2870->io_lock); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static inline void aat2870_enable(struct aat2870_data *aat2870) | 
 | { | 
 | 	if (aat2870->en_pin >= 0) | 
 | 		gpio_set_value(aat2870->en_pin, 1); | 
 |  | 
 | 	aat2870->is_enable = 1; | 
 | } | 
 |  | 
 | static inline void aat2870_disable(struct aat2870_data *aat2870) | 
 | { | 
 | 	if (aat2870->en_pin >= 0) | 
 | 		gpio_set_value(aat2870->en_pin, 0); | 
 |  | 
 | 	aat2870->is_enable = 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_DEBUG_FS | 
 | static ssize_t aat2870_dump_reg(struct aat2870_data *aat2870, char *buf) | 
 | { | 
 | 	u8 addr, val; | 
 | 	ssize_t count = 0; | 
 | 	int ret; | 
 |  | 
 | 	count += sprintf(buf, "aat2870 registers\n"); | 
 | 	for (addr = 0; addr < AAT2870_REG_NUM; addr++) { | 
 | 		count += sprintf(buf + count, "0x%02x: ", addr); | 
 | 		if (count >= PAGE_SIZE - 1) | 
 | 			break; | 
 |  | 
 | 		ret = aat2870->read(aat2870, addr, &val); | 
 | 		if (ret == 0) | 
 | 			count += snprintf(buf + count, PAGE_SIZE - count, | 
 | 					  "0x%02x", val); | 
 | 		else | 
 | 			count += snprintf(buf + count, PAGE_SIZE - count, | 
 | 					  "<read fail: %d>", ret); | 
 |  | 
 | 		if (count >= PAGE_SIZE - 1) | 
 | 			break; | 
 |  | 
 | 		count += snprintf(buf + count, PAGE_SIZE - count, "\n"); | 
 | 		if (count >= PAGE_SIZE - 1) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	/* Truncate count; min() would cause a warning */ | 
 | 	if (count >= PAGE_SIZE) | 
 | 		count = PAGE_SIZE - 1; | 
 |  | 
 | 	return count; | 
 | } | 
 |  | 
 | static int aat2870_reg_open_file(struct inode *inode, struct file *file) | 
 | { | 
 | 	file->private_data = inode->i_private; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static ssize_t aat2870_reg_read_file(struct file *file, char __user *user_buf, | 
 | 				     size_t count, loff_t *ppos) | 
 | { | 
 | 	struct aat2870_data *aat2870 = file->private_data; | 
 | 	char *buf; | 
 | 	ssize_t ret; | 
 |  | 
 | 	buf = kmalloc(PAGE_SIZE, GFP_KERNEL); | 
 | 	if (!buf) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	ret = aat2870_dump_reg(aat2870, buf); | 
 | 	if (ret >= 0) | 
 | 		ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); | 
 |  | 
 | 	kfree(buf); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static ssize_t aat2870_reg_write_file(struct file *file, | 
 | 				      const char __user *user_buf, size_t count, | 
 | 				      loff_t *ppos) | 
 | { | 
 | 	struct aat2870_data *aat2870 = file->private_data; | 
 | 	char buf[32]; | 
 | 	int buf_size; | 
 | 	char *start = buf; | 
 | 	unsigned long addr, val; | 
 | 	int ret; | 
 |  | 
 | 	buf_size = min(count, (sizeof(buf)-1)); | 
 | 	if (copy_from_user(buf, user_buf, buf_size)) { | 
 | 		dev_err(aat2870->dev, "Failed to copy from user\n"); | 
 | 		return -EFAULT; | 
 | 	} | 
 | 	buf[buf_size] = 0; | 
 |  | 
 | 	while (*start == ' ') | 
 | 		start++; | 
 |  | 
 | 	addr = simple_strtoul(start, &start, 16); | 
 | 	if (addr >= AAT2870_REG_NUM) { | 
 | 		dev_err(aat2870->dev, "Invalid address, 0x%lx\n", addr); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	while (*start == ' ') | 
 | 		start++; | 
 |  | 
 | 	if (strict_strtoul(start, 16, &val)) | 
 | 		return -EINVAL; | 
 |  | 
 | 	ret = aat2870->write(aat2870, (u8)addr, (u8)val); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	return buf_size; | 
 | } | 
 |  | 
 | static const struct file_operations aat2870_reg_fops = { | 
 | 	.open = aat2870_reg_open_file, | 
 | 	.read = aat2870_reg_read_file, | 
 | 	.write = aat2870_reg_write_file, | 
 | }; | 
 |  | 
 | static void aat2870_init_debugfs(struct aat2870_data *aat2870) | 
 | { | 
 | 	aat2870->dentry_root = debugfs_create_dir("aat2870", NULL); | 
 | 	if (!aat2870->dentry_root) { | 
 | 		dev_warn(aat2870->dev, | 
 | 			 "Failed to create debugfs root directory\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	aat2870->dentry_reg = debugfs_create_file("regs", 0644, | 
 | 						  aat2870->dentry_root, | 
 | 						  aat2870, &aat2870_reg_fops); | 
 | 	if (!aat2870->dentry_reg) | 
 | 		dev_warn(aat2870->dev, | 
 | 			 "Failed to create debugfs register file\n"); | 
 | } | 
 |  | 
 | static void aat2870_uninit_debugfs(struct aat2870_data *aat2870) | 
 | { | 
 | 	debugfs_remove_recursive(aat2870->dentry_root); | 
 | } | 
 | #else | 
 | static inline void aat2870_init_debugfs(struct aat2870_data *aat2870) | 
 | { | 
 | } | 
 |  | 
 | static inline void aat2870_uninit_debugfs(struct aat2870_data *aat2870) | 
 | { | 
 | } | 
 | #endif /* CONFIG_DEBUG_FS */ | 
 |  | 
 | static int aat2870_i2c_probe(struct i2c_client *client, | 
 | 			     const struct i2c_device_id *id) | 
 | { | 
 | 	struct aat2870_platform_data *pdata = client->dev.platform_data; | 
 | 	struct aat2870_data *aat2870; | 
 | 	int i, j; | 
 | 	int ret = 0; | 
 |  | 
 | 	aat2870 = kzalloc(sizeof(struct aat2870_data), GFP_KERNEL); | 
 | 	if (!aat2870) { | 
 | 		dev_err(&client->dev, | 
 | 			"Failed to allocate memory for aat2870\n"); | 
 | 		ret = -ENOMEM; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	aat2870->dev = &client->dev; | 
 | 	dev_set_drvdata(aat2870->dev, aat2870); | 
 |  | 
 | 	aat2870->client = client; | 
 | 	i2c_set_clientdata(client, aat2870); | 
 |  | 
 | 	aat2870->reg_cache = aat2870_regs; | 
 |  | 
 | 	if (pdata->en_pin < 0) | 
 | 		aat2870->en_pin = -1; | 
 | 	else | 
 | 		aat2870->en_pin = pdata->en_pin; | 
 |  | 
 | 	aat2870->init = pdata->init; | 
 | 	aat2870->uninit = pdata->uninit; | 
 | 	aat2870->read = aat2870_read; | 
 | 	aat2870->write = aat2870_write; | 
 | 	aat2870->update = aat2870_update; | 
 |  | 
 | 	mutex_init(&aat2870->io_lock); | 
 |  | 
 | 	if (aat2870->init) | 
 | 		aat2870->init(aat2870); | 
 |  | 
 | 	if (aat2870->en_pin >= 0) { | 
 | 		ret = gpio_request(aat2870->en_pin, "aat2870-en"); | 
 | 		if (ret < 0) { | 
 | 			dev_err(&client->dev, | 
 | 				"Failed to request GPIO %d\n", aat2870->en_pin); | 
 | 			goto out_kfree; | 
 | 		} | 
 | 		gpio_direction_output(aat2870->en_pin, 1); | 
 | 	} | 
 |  | 
 | 	aat2870_enable(aat2870); | 
 |  | 
 | 	for (i = 0; i < pdata->num_subdevs; i++) { | 
 | 		for (j = 0; j < ARRAY_SIZE(aat2870_devs); j++) { | 
 | 			if ((pdata->subdevs[i].id == aat2870_devs[j].id) && | 
 | 					!strcmp(pdata->subdevs[i].name, | 
 | 						aat2870_devs[j].name)) { | 
 | 				aat2870_devs[j].platform_data = | 
 | 					pdata->subdevs[i].platform_data; | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} | 
 |  | 
 | 	ret = mfd_add_devices(aat2870->dev, 0, aat2870_devs, | 
 | 			      ARRAY_SIZE(aat2870_devs), NULL, 0); | 
 | 	if (ret != 0) { | 
 | 		dev_err(aat2870->dev, "Failed to add subdev: %d\n", ret); | 
 | 		goto out_disable; | 
 | 	} | 
 |  | 
 | 	aat2870_init_debugfs(aat2870); | 
 |  | 
 | 	return 0; | 
 |  | 
 | out_disable: | 
 | 	aat2870_disable(aat2870); | 
 | 	if (aat2870->en_pin >= 0) | 
 | 		gpio_free(aat2870->en_pin); | 
 | out_kfree: | 
 | 	kfree(aat2870); | 
 | out: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int aat2870_i2c_remove(struct i2c_client *client) | 
 | { | 
 | 	struct aat2870_data *aat2870 = i2c_get_clientdata(client); | 
 |  | 
 | 	aat2870_uninit_debugfs(aat2870); | 
 |  | 
 | 	mfd_remove_devices(aat2870->dev); | 
 | 	aat2870_disable(aat2870); | 
 | 	if (aat2870->en_pin >= 0) | 
 | 		gpio_free(aat2870->en_pin); | 
 | 	if (aat2870->uninit) | 
 | 		aat2870->uninit(aat2870); | 
 | 	kfree(aat2870); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | #ifdef CONFIG_PM | 
 | static int aat2870_i2c_suspend(struct i2c_client *client, pm_message_t state) | 
 | { | 
 | 	struct aat2870_data *aat2870 = i2c_get_clientdata(client); | 
 |  | 
 | 	aat2870_disable(aat2870); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int aat2870_i2c_resume(struct i2c_client *client) | 
 | { | 
 | 	struct aat2870_data *aat2870 = i2c_get_clientdata(client); | 
 | 	struct aat2870_register *reg = NULL; | 
 | 	int i; | 
 |  | 
 | 	aat2870_enable(aat2870); | 
 |  | 
 | 	/* restore registers */ | 
 | 	for (i = 0; i < AAT2870_REG_NUM; i++) { | 
 | 		reg = &aat2870->reg_cache[i]; | 
 | 		if (reg->writeable) | 
 | 			aat2870->write(aat2870, i, reg->value); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 | #else | 
 | #define aat2870_i2c_suspend	NULL | 
 | #define aat2870_i2c_resume	NULL | 
 | #endif /* CONFIG_PM */ | 
 |  | 
 | static struct i2c_device_id aat2870_i2c_id_table[] = { | 
 | 	{ "aat2870", 0 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, aat2870_i2c_id_table); | 
 |  | 
 | static struct i2c_driver aat2870_i2c_driver = { | 
 | 	.driver = { | 
 | 		.name	= "aat2870", | 
 | 		.owner	= THIS_MODULE, | 
 | 	}, | 
 | 	.probe		= aat2870_i2c_probe, | 
 | 	.remove		= aat2870_i2c_remove, | 
 | 	.suspend	= aat2870_i2c_suspend, | 
 | 	.resume		= aat2870_i2c_resume, | 
 | 	.id_table	= aat2870_i2c_id_table, | 
 | }; | 
 |  | 
 | static int __init aat2870_init(void) | 
 | { | 
 | 	return i2c_add_driver(&aat2870_i2c_driver); | 
 | } | 
 | subsys_initcall(aat2870_init); | 
 |  | 
 | static void __exit aat2870_exit(void) | 
 | { | 
 | 	i2c_del_driver(&aat2870_i2c_driver); | 
 | } | 
 | module_exit(aat2870_exit); | 
 |  | 
 | MODULE_DESCRIPTION("Core support for the AnalogicTech AAT2870"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_AUTHOR("Jin Park <[email protected]>"); |